Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
730
740
750
760
770
780
789
790
791
792
793
794
795
796
797
798
799
800
801
810
820
830
840
850
860
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| Adjustable speed electrical power drive systems (PDS) - Part 9-2: Ecodesign for motor systems - Energy efficiency determination and classification | |
| Adjustable speed electrical power drive systems - Part 5-1: Safety requirements - Electrical, thermal and energy | |
| Adjustable speed electrical power drive systems - Part 5-3: Safety requirements - Functional, electrical and environmental requirements for encoders | |
| Adjustable speed electrical power drive systems \x96 Part 3: EMC requirements and specific test methods for PDS and machine tools | |
| Adjustable speed electrical power drive systems Part 1: General requirements - Rating specifications for low voltage adjustable speed DC power drive systems | |
| Adjustable speed electrical power drive systems Part 2: General requirements - Rating specifications for adjustable speed AC power drive systems | |
| Adjustable speed electrical power drive systems Part 3: EMC requirements and specific test methods | |
| Application integration at electric utilities - System interfaces for distribution management Part 100: IEC Implementation profiles for application integration | |
| Application integration at electric utilities - System interfaces for distribution management Part 13: Common distribution power system model profiles | |
| Application integration at electric utilities - System interfaces for distribution management Part 1: Interface architecture and general recommendations | |
| Application integration at electric utilities - System interfaces for distribution management Part 3: Interface for network operations | |
| Application integration at electric utilities - System interfaces for distribution management Part 4: Interfaces for records and asset management | |
| Application integration at electric utilities - System interfaces for distribution management Part 5: Distributed energy optimization | |
| Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz - 300 GHz) | |
| Audio, video, and related equipment - Determination of power consumption Part 2: Signals and media | |
| Audio, video, and related equipment - Determination of power consumption Part 3: Television sets (TA 19) | |
| Audio, video, and related equipment - Methods of measurement for power consumption Part 7: Computer monitors | |
| Audio/video, information and communication technology equipment Part 1: Safety requirements | |
| Audio/video, information and communication technology equipment Part 3: Safety aspects for DC power transfer through communication cables and ports | |
| Automation systems in the process industry - Factory acceptance test (FAT), site acceptance test (SAT), and site integration test (SIT) | |
| Cable assemblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method | |
| Cable cleats for electrical installations | |
| Cable management systems - Cable ties for electrical installations | |
| Calibration of wavelength/optical frequency measurement instruments - Part 3: Optical frequency meters internally referenced to a frequency comb | |
| Capacitors for high-voltage alternating current circuit-breakers Part 2: TRV capacitors | |
| Communication networks and systems for power utility automation Part 7-420: Basic communication structure - Distributed energy resources and distribution automation logical nodes | |
| Communication networks and systems for power utility automation Part 8-2: Specific Communication Service Mapping (SCSM) - Mapping to Extensible Messaging Presence Protocol (XMPP) | |
| Components for low-voltage surge protection \x96 Part 332: Selection and application principles for metal oxide varistors (MOV) | |
| Components for low-voltage surge protection Part 341: Performance requirements and test circuits for thyristor surge suppressors (TSS) | |
| Components for low-voltage surge protection Part 352: Selection and application principles for telecommunications and signalling network surge isolation transformers (SITs) | |
| Components for low-voltage surge protective devices Part 331: Performance requirements and test methods for metal oxide varistors (MOV) | |
| Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and type approval | |
| Control systems in the process industry - Electrical and instrumentation loop check | |
| Cooking fume extractors - Methods for measuring performance | |
| Cores made of soft magnetic materials - Measuring methods - Part 3: Magnetic properties at high excitation level | |
| DC or AC supplied electronic controlgear for LED modules - Performance requirements | |
| Dependability of new products containing reused parts and life-extended products | |
| Determination of certain substances in electrotechnical products - Part 11: Tris (2-chloroethyl) phosphate (TCEP) in plastics by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-mass spectrometry (LC-MS) | |
| Determination of certain substances in electrotechnical products Part 12: Simultaneous determination - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry | |
| Determination of certain substances in electrotechnical products Part 2: Disassembly, disjointment and mechanical sample preparation | |
| Determination of certain substances in electrotechnical products Part 3-3: Screening - Polybrominated biphenyls, polybrominated diphenyl ethers and phthalates in polymers by gas chromatography-mass spectrometry using a pyrolyser/thermal desorption accessory (Py/TD... | |
| Determination of certain substances in electrotechnical products Part 3-4: Screening - Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLC-UV), thin layer chromatography (TLC)... | |
| Determination of certain substances in electrotechnical products Part 9: Hexabromocyclododeca ne in polymers by chromatography-mass spectrometry (GC-MS) | |
| Determination of power losses in high-voltage direct current (HVDC) converter stations with line-commutated converters | |
| Determination of RF field strength, power density and SAR in the vicinity of base stations for the purpose of evaluating human exposure | |
| Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) Part 3: EDDL syntax and semantics | |
| Devices and integration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) Part 4: EDD interpretation | |
| Devices and intergration in enterprise systems - Function blocks (FB) for process control and electronic device description language (EDDL) Part 5: EDDL Builtin library | |
| Digital addressable lighting interface - Part 104: General requirements - Wireless and alternative wired system components | |
| Digital addressable lighting interface - Part 224: Particular requirements for control gear - Non-replaceable light source (device type 23) | |
| Digital addressable lighting interface - Part 305: Particular requirements - Input devices - Colour sensor | |
| Digital addressable lighting interface Part 101: General requirements - System components | |
| Digital addressable lighting interface Part 102: General requirements - Control gear | |
| Digital addressable lighting interface Part 103: General requirements - Control devices | |
| Digital addressable lighting interface Part 105: Particular requirements for control gear and control devices - Firmware Transfer | |
| Digital addressable lighting interface Part 150: Particular requirements - Auxiliary power supply | |
| Digital addressable lighting interface Part 202: Particular requirements for control gear - Self-contained emergency lighting (device type 1) | |
| Digital addressable lighting interface Part 207: Particular requirements for control gear - LED modules (device type 6) | |
| Digital addressable lighting interface Part 216: Particular requirements for control gear - Load referencing (device type 15) | |
| Digital addressable lighting interface Part 217: Particular requirements for control gear - Thermal gear protection (device type 16) | |
| Digital addressable lighting interface Part 218: Particular requirements for control gear - Dimming curve selection (device type 17) | |
| Digital addressable lighting interface Part 220: Particular requirements for control gear - Centrally supplied emergency operation (device type 19) | |
| Digital addressable lighting interface Part 221: Particular requirements for control gear - Demand Response (device type 20) | |
| Digital addressable lighting interface Part 222: Particular requirements for control gear - Thermal lamp protection (device type 21) | |
| Digital addressable lighting interface Part 253: Particular requirements - Diagnostics and maintenance (device type 52) | |
| Digital addressable lighting interface Part 306: Particular requirements - Input devices - General purpose sensor | |
| Digital addressable lighting interface Part 332: Particular requirements - Input devices - Feedback | |
| Digital addressable lighting interface Part 333: Particular requirements for control devices - Manual configuration (feature type 33) | |
| Dynamic modules - Generic specification | |
| Dynamic modules - Part 1: Performance standards - General conditions | |
| Dynamic modules - Part 2-1: Reliability qualification - Test template | |
| Dynamic modules Part 1: Performance standards - General conditions | |
| Dynamic modules Part 2-1: Reliability qualification - Test template | |
| Dynamic modules Part 3-3: Performance specification templates - Wavelength selective switches | |
| Dynamic modules Part 3-4: Performance specification templates - Multicast optical switches | |
| Dynamic modules Part 5-2: Test methods - 1xN fixed-grid WSS - Dynamic crosstalk measurement | |
| Electric toys - Safety | |
| Electric vehicle conductive charging system \x96 Part 1: General requirements | |
| Electric vehicle conductive charging system \x96 Part 24: Digital communication between a DC EV supply equipment and an electric vehicle for control of DC charging | |
| Electric vehicle conductive charging system Part 1: General requirements | |
| Electric vehicle conductive charging system Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems | |
| Electric vehicle conductive charging system Part 25: DC EV supply equipment where protection relies on electrical separation | |
| Electric vehicle wireless power transfer (WPT) systems Part 1: General requirements | |
| Electric vehicle wireless power transfer (WPT) systems Part 2: Specific requirements for MF-WPT system communication and activities | |
| Electric vehicle wireless power transfer (WPT) systems Part 3: Specific requirements for magnetic field wireless power transfer systems | |
| Electrical accessories - Residual current monitors (RCMs) Part 1: RCMs for household and similar use | |
| Electrical energy meters - Test equipment, techniques and procedures \x96 Part 3: Automatic meter testing system (AMTS) | |
| Electrical installations for aeronautical ground lighting at aerodromes \x96 Part 1-2: Fundamental principles - Particular requirements for series circuits | |
| Electrical installations for aeronautical ground lighting at aerodromes Part 1: Fundamental principles | |
| Electrical installations for lighting and beaconing of aerodromes Part 3-4: Safety secondary circuits in series circuits - General safety requirements | |
| Electrical insulation systems - Procedures for thermal evaluation Part 32: Multifactor evaluation with increased factors during diagnostic testing | |
| Electrical safety in low voltage distribution systems up to 1 000 V a.c. and 1 500 V d.c. - Equipment for testing, measuring or monitoring of protective measures Part 7:... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures - Part... | |
| Electrical safety in low voltage distribution systems up to 1 000 V AC and 1 500 V DC - Equipment for testing, measuring or monitoring of protective measures \x96 Part... | |
| Electricity metering (a.c.) - Tariff and load control Part 11: Particular requirements for electronic ripple control receivers | |
| Electricity metering (AC) - Tariff and load control Part 21: Particular requirements for time switches | |
| Electricity metering - Payment systems Part 31: Particular requirements - Static payment meters for active energy (classes 0,5, 1 and 2) | |
| Electricity metering - Payment systems Part 42: Transaction Reference Numbers (TRN) | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) | |
| Electricity metering data exchange - The DLMS/COSEM suite - Part 8-12: Communication profile for Low-Power Wide Area Networks (LPWANs) | |
| Electricity metering data exchange - The DLMS/COSEM suite Part 3-1: Use of local area networks on twisted pair with carrier signalling | |
| Electricity metering data exchange - The DLMS/COSEM suite Part 6-2: COSEM interface classes | |
| Electricity metering data exchange - the DLMS/COSEM suite Part 8-4: Communication profiles for narrow-band OFDM PLC PRIME neighbourhood networks | |
| Electricity metering data exchange - The DLMS/COSEM suite Part 8-8: Communication profile for ISO/IEC 14908 series networks | |
| Electricity metering equipment - General requirements, tests and test conditions \x96 Part 31: Product safety requirements and tests | |
| Electricity metering equipment - General requirements, tests and test conditions Part 11: Metering equipment | |
| Electricity metering equipment - General requirements, tests and test conditions Part 41: Energy registration methods and requirements for multi-energy and multi-rate meters | |
| Electricity metering equipment - General requirements, tests and test conditions. Part 11: Metering equipment | |
| Electricity metering equipment - Particular requirements \x96 Part 41: Static meters for DC energy (classes 0,5 and 1) | |
| Electricity metering equipment - Particular requirements Part 21: Static meters for AC active energy (classes 0,5, 1 and 2) | |
| Electricity metering equipment - Particular requirements Part 22: Static meters for AC active energy (classes 0,1S, 0,2S and 0,5S) | |
| Electricity metering equipment Particular requirements - Part 22: Static meters for AC active energy (classes 0,1S, 0,2S and 0,5S) | |
| Electricity metering equipment Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) | |
| Electricity metering equipment Particular requirements - Part 24: Static meters for fundamental component reactive energy (classes 0,5 S, 1S, 1, 2 and 3) | |
| Electromechanical elementary relays Part 10: Additional functional aspects and safety requirements for highcapacity relays | |
| Electromechanical elementary relays Part 4: General and safety requirements for reed relays | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 3: Data | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 4: Storage | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 6: Packaged or finished devices | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 7: Micro-electromechani cal devices | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 8: Passive electronic devices | |
| Electronic components - Long-term storage of electronic semiconductor devices Part 9: Special cases | |
| EMC IC modelling Part 1: General modelling framework | |
| EMC IC modelling Part 6: Models of integrated circuits for Pulse immunity behavioural simulation - Conducted Pulse Immunity (ICIM-CPI) | |
| Energy management system application program interface (EMS-API) Part 301: Common information model (CIM) base | |
| Energy management system application program interface (EMS-API) Part 302: Common information model (CIM) dynamics | |
| Energy management system application program interface (EMS-API) Part 401: Profile framework | |
| Energy management system application program interface (EMS-API) Part 452: CIM static transmission network model profiles | |
| Energy management system application program interface (EMS-API) Part 456: Solved power system state profiles | |
| Energy Management system application program interface (EMS-API) Part 457: Dynamics profile | |
| Energy management system application program interface (EMS-API) Part 600-1: Common Grid Model Exchange Standard (CGMES) - Structure and rules | |
| Energy performance of lamp controlgear Part 1: Controlgear for fluorescent lamps - Method of measurement to determine the total input power of controlgear circuits and the efficiency of the controlgear... | |
| Energy performance of lamp controlgear Part 2: Controlgear for high intensity discharge lamps (excluding fluorescent lamps) - Method of measurement to determine the efficiency of controlgear | |
| Energy performance of lamp controlgear Part 3: Controlgear for tungsten-halogen lamps and LED light sources - Method of measurement to determine the efficiency of controlgear | |
| Enterprise business function interfaces for utility operations \x96 Part 9: Interfaces for meter reading and control | |
| Enterprise-control system integration Part 6: Messaging service model | |
| Environmentally conscious design (ECD) - Principles, requirements and guidance | |
| Fibre optic active components and devices - Package and interface standards - Part 17: Transmitter and receiver components with dual coaxial RF connectors | |
| Fibre optic active components and devices - Package and interface standards \x96 Part 11: 14-pin modulator integrated laser diode modules and pump laser diode modules | |
| Fibre optic active components and devices - Package and interface standards Part 15: Discrete vertical cavity surface emitting laser packages | |
| Fibre optic active components and devices - Package and interface standards Part 19: Photonic chip scale package | |
| Fibre optic active components and devices - Package and interface standards Part 1: General and guidance | |
| Fibre optic active components and devices - Package and interface standards Part 21: Design guide of electrical interface of PIC packages using silicon fine-pitch ball grid array (S-FBGA) and silicon... | |
| Fibre optic active components and devices - Package and interface standards Part 22: 25 Gbit/s directly modulated laser packages with temperature control unit | |
| Fibre optic active components and devices - Performance standards \x96 Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| Fibre optic active components and devices - Performance standards Part 10: Radio-over-fibre (RoF) transceivers for mobile fronthaul | |
| Fibre optic active components and devices - Performance standards Part 11: Multiple channel transmitter/receiver chip scale package with multimode fibre interface | |
| Fibre optic active components and devices - Performance standards Part 12: Distributed feedback laser diode device for analogue radio over fibre systems | |
| Fibre optic active components and devices - Performance standards Part 3: Modulator-integrated laser diode transmitters for 40-Gbit/s fibre optic transmission systems | |
| Fibre optic active components and devices - Performance standards Part 4: 1 300 nm fibre optic transceivers for Gigabit Ethernet application | |
| Fibre optic active components and devices - Performance standards Part 5: ATM-PON transceivers with LD driver and CDR ICs | |
| Fibre optic active components and devices - Test and measurement procedures Part 6: Universal mezzanine boards for test and measurement of photonic devices | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 6-2: Connection of 50 \xb5m core diameter multimode physically contacting fibres \x96 Non-angled for reference connector application,... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces \x96 Part 3-1: Connector parameters of dispersion unshifted single-mode physically contacting fibres - non-angled 2,5 mm and 1,25 mm... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces \x96 Part 3-2: Connector parameters of dispersion unshifted single-mode physically contacting fibres - angled 2,5 mm and 1,25 mm... | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres Part 1: Optical interfaces for dispersion unshifted fibres - General and guidance | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres Part 2-1: Connection parameters of dispersion unshifted physically contacting fibres - Nonangled | |
| Fibre optic interconnecting devices and passive components - Connector optical interfaces for single-mode fibres Part 2-2: Connection parameters of dispersion unshifted physically contacting fibres - Angled | |
| Fibre optic interconnecting devices and passive components - Fibre optic circulators - Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces \x96 Part 13: Type FC-PC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces \x96 Part 36: Type SAC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 35: Type LSHE connector family for harsh environments | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 4: Type SC connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 6: Type MU connector family | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 7-2: Type MPO connector family - Two fibre rows | |
| Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 7-3: Type MPO connector family - Two fibre rows 16 fibre wide | |
| Fibre optic interconnecting devices and passive components - Fibre optic fixed filters - Generic Specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic passive chromatic dispersion compensators \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Fibre optic WDM devices \x96 Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components - Interface standard for fibre management systems Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 081-02: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 081-03: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP - Outdoor protected environment... | |
| Fibre optic interconnecting devices and passive components - Performance standard - Part 081-06: Non-connectorized single-mode fibre optic middle-scale 1 x N DWDM devices for category OP+ - Extended outdoor protected... | |
| Fibre optic interconnecting devices and passive components - Performance standard \x96 Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category c - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard \x96 Part 071-02: Non-connectorized single-mode fibre optic 1 \xd7 2 and 2 \xd7 2 spatial switches for category C -... | |
| Fibre optic interconnecting devices and passive components - Performance standard \x96 Part 082-02: Pigtailed single-mode fibre optic 1,31/1,55 \xb5m WWDM devices for category C - Indoor controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard \x96 Part 084-02: Non connectorised single-mode 980/1550 nm WWDM devices for category C - Indoor controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard \x96 Part 086-02: Non-connectorized single-mode bidirectional 1 490 / 1 550 nm downstream and 1 310 nm upstream WWDM devices... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 043-02: Simplex patch-cord style single-mode fibre wavelength selective devices with cylindrical ferrule connectors for category C - Controlled environment... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 051-02: Plug-receptacle style single-mode fibre fixed optical attenuators for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 053-02: Non-connectorized, single-mode fibre, electrically controlled, variable optical attenuator for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - performance standard Part 061-2: Single-mode fibre optic pigtailed style polarization independent isolators for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 071-02: Non-connectorized single-mode fibre optic 1 x 2 and 2 x 2 spatial switches for category C - Controlled... | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 089-02: Non-connectorised singlemode bidirectional OTDR monitoring WWDM for category C - Indoor controlled environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 091-02: Non-connectorized 3-port incompletely circulated single-mode fibre optic circulators for category C - Controlled environments | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 111-07: Sealed closures - Category A - Aerial | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 111-08: Sealed closures for Category G - Ground | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 111-09: Sealed closures - Category S - Subterranean | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 131-03: Single-mode mechanical fibre splice for category OP - Outdoor protected environment | |
| Fibre optic interconnecting devices and passive components - Performance standard Part 1: General and guidance | |
| Fibre optic interconnecting devices and passive components - Reliability Part 9-4: High power qualification of passive optical components for environmental category C | |
| Fibre optic interconnecting devices and passive components performance standard Part 085-2: Nonconnectorized single-mode pigtailed CWDM devices for category C - Indoor controlled environment | |
| Fibre optic interconnecting devices and passive components performance standard Part 101-03: Fibre management systems for category OP - Outdoor protected environment | |
| Fibre optic sensors - Generic specification | |
| Fibre optic sensors - Part 1-2: Strain measurement - Distributed sensing based on Brillouin scattering | |
| Fibre optic sensors - Part 7-3: Voltage measurement - Polarimetric method | |
| Fibre optic sensors \x96 Part 6-1: Displacement measurement - Displacement sensors based on fibre Bragg gratings | |
| Fibre optic sensors Part 1-1: Strain measurement - Strain sensors based on fibre Bragg gratings | |
| Fibre Optic Sensors Part 3-2: Acoustic sensing and vibration measurement - Distributed sensing | |
| Fibre optic sensors Part 4-3: Electric current measurement - Polarimetric method | |
| Fibre optic sensors Part 5-1: Tilt measurement - Tilt sensors based on fibre Bragg gratings | |
| Fixed electric double-layer capacitors for use in electric and electronic equipment Part 1: Generic specification | |
| Fixed electric double-layer capacitors for use in electronic equipment \x96 Part 2: Sectional specification - Electric double-layer capacitors for power application | |
| Framework for energy market communications Part 301: Common information model (CIM) extensions for markets | |
| Framework for energy market communications Part 451-10: Profiles for Energy Consumption Data ("My Energy Data") | |
| Framework for energy market communications Part 451-5: Publication of information on market, contextual and assembly models for European markets | |
| Framework for energy market communications Part 451-7: Balancing processes, contextual and assembly models for European style market | |
| Framework for energy market communications Part 451-8: HVDC processes, contextual and assembly models for European style market | |
| Framework for energy market communications Part 503: Market data exchanges guidelines for the IEC 62325-351 profile | |
| Fuel cell technologies \x96 Part 2-100: Fuel cell modules - Safety | |
| Fuel cell technologies \x96 Part 3-202: Stationary fuel cell power systems - Performance test methods for small fuel cell power systems for multiple units operation | |
| Fuel cell technologies \x96 Part 4-202: Fuel cell power systems for propulsion and auxiliary power units - Unmanned aircrafts - Performance test methods | |
| Fuel cell technologies \x96 Part 6-101: Micro fuel cell power systems - Safety - General requirements | |
| Fuel cell technologies \x96 Part 6-106: Micro fuel cell power systems - Safety - Indirect Class 8 (corrosive) compounds | |
| Fuel cell technologies \x96 Part 6-107: Micro fuel cell power systems - Safety - Indirect waterreactive (Division 4.3) compounds | |
| Fuel cell technologies \x96 Part 6-401: Micro fuel cell power systems - Power and data interchangeability - Performance test methods for laptop computer | |
| Fuel cell technologies Part 2-100: Fuel cell modules - Safety | |
| Fuel cell technologies Part 3-100: Stationary fuel cell power systems - Safety | |
| Fuel cell technologies Part 4-101: Fuel cell power systems for electrically powered industrial trucks - Safety | |
| Fuel cell technologies Part 4-102: Fuel cell power systems for electrically powered industrial trucks - Performance test methods | |
| Fuel cell technologies Part 4-600: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Fuel cell/battery hybrid systems performance test methods for excavators... | |
| Fuel cell technologies Part 5-100: Portable fuel cell power systems - Safety | |
| Fuel cell technologies Part 6-400: Micro fuel cell power systems - Power and data interchangeability | |
| Fuel cell technologies Part 7-2: Test methods - Single cell and stack performance tests for solid oxide fuel cells (SOFCs) | |
| Fuel cell technologies Part 8-101: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of solid oxide single cells and stacks, including reversible... | |
| Fuel cell technologies Part 8-102: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of single cells and stacks with proton exchange membrane,... | |
| Fuel cell technologies Part 8-201: Energy storage systems using fuel cell modules in reverse mode - Test procedures for the performance of power-to-power systems | |
| Fuel cell technologies Part 8-301: Energy storage systems using fuel cell modules in reverse mode - Power-to-methane energy systems based on solid oxide cells including reversible operation - Performance test... | |
| Function blocks (FB) for process control and electronic device description language (EDDL) Part 2: Specification of FB concept | |
| High frequency inductive components - Electrical characteristics and measuring methods Part 1: Nanohenry range chip inductor | |
| High frequency inductive components - Electrical characteristics and measuring methods Part 2: Rated current of inductors for DC-to-DC converters | |
| High frequency inductive components - Non-electrical characteristics and measuring methods Part 2: Test methods for non-electrical characteristics | |
| High-voltage switchgear and controlgear - Part 102: High-voltage alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear \x96 Part 100: Alternating-current circuit-breakers | |
| High-voltage switchgear and controlgear \x96 Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 202: AC prefabricated substations for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 211: Direct connection between power transformers and gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear \x96 Part 214: Internal arc classification for AC metal-enclosed pole-mounted switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV... | |
| High-voltage switchgear and controlgear Part 100: Alternating current circuit-breakers | |
| High-voltage switchgear and controlgear Part 101: Synthetic testing | |
| High-voltage switchgear and controlgear Part 102: Alternating current disconnectors and earthing switches | |
| High-voltage switchgear and controlgear Part 104: Alternating current switches for rated voltages higher than 52 kV | |
| High-voltage switchgear and controlgear Part 106: Alternating current contactors, contactor-based controllers and motor-starters | |
| High-voltage switchgear and controlgear Part 107: Alternating current fused circuit-switchers for rated voltages above 1 kV up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 108: High-voltage alternating current disconnecting circuit-breakers for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 109: Alternating-current series capacitor by-pass switches | |
| High-voltage switchgear and controlgear Part 110: Inductive load switching | |
| High-voltage switchgear and controlgear Part 112: Alternating current high-speed earthing switches for secondary arc extinction on transmission lines | |
| High-voltage switchgear and controlgear Part 200: AC metal-enclosed switchgear and controlgear for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 202: AC prefabricated substations for rated voltages above 1 kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 203: AC gas-insulated metal-enclosed switchgear for rated voltages above 52 kV | |
| High-voltage switchgear and controlgear Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV | |
| High-voltage switchgear and controlgear Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations | |
| High-voltage switchgear and controlgear Part 212: Compact Equipment Assembly for Distribution Substation (CEADS) for AC voltages up to 52 kV | |
| High-voltage switchgear and controlgear Part 213: Voltage detecting and indicating system | |
| High-voltage switchgear and controlgear Part 214: Internal arc classification for metal enclosed pole-mounted switchgear and controlgear for rated voltages above 1kV and up to and including 52 kV | |
| High-voltage switchgear and controlgear Part 215: Phase comparator used with VDIS | |
| High-voltage switchgear and controlgear Part 4: Handling procedures for gases for insulation and/or switching | |
| Household and similar use electrical hair care appliances - Methods for measuring the performance | |
| Hydraulic machines - Guidelines for dealing with hydro-abrasive erosion in Kaplan, Francis and Pelton Turbines | |
| Hydraulic machines, radial and axial - Methodology for performance transposition from model to prototype | |
| Industrial communication networks - High availability automation networks Part 2: Media Redundancy Protocol (MRP) | |
| Industrial communication networks - High availability automation networks Part 3: Parallel Redundancy Protocol (PRP) and High-availability Seamless Redundancy (HSR) | |
| Industrial communication networks - High availability automation networks Part 5: Beacon Redundancy Protocol (BRP) | |
| Industrial communication networks - High availability automation networks. Part 2: Media Redundancy Protocol (MRP) | |
| Industrial communication networks - Installation of communication networks in industrial premises | |
| Industrial communication networks - Network and system security Part 3-3: System security requirements and security levels | |
| Industrial communication networks - Profiles \x96 Part 3-19: Functional safety fieldbuses - Additional specifications for CPF 19 | |
| Industrial communication networks - Profiles \x96 Part 3: Functional safety fieldbuses - General rules and profile definitions | |
| Industrial communication networks - Profiles Part 1: Fieldbus profiles | |
| Industrial communication networks - Profiles Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC/IEEE 8802-3 | |
| Industrial communication networks - Profiles Part 3-13: Functional safety fieldbuses - Additional specifications for CPF 13 | |
| Industrial communication networks - Profiles Part 3-2: Functional safety fieldbuses - Additional specifications for CPF 2 | |
| Industrial communication networks - Profiles Part 3-3: Functional safety fieldbuses - Additional specifications for CPF 3 | |
| Industrial communication networks - Profiles Part 3-8: Functional safety fieldbuses - Additional specifications for CPF8 | |
| Industrial communication networks - Profiles Part 3: Functional safety fieldbuses - General rules and profile definitions | |
| Industrial communication networks - Profiles Part 5-12: Installation of fieldbuses - Installation profiles for CPF 12 | |
| Industrial communication networks - Profiles Part 5-18: Installation of fieldbuses - Installation profiles for CPF 18 | |
| Industrial communication networks - Profiles Part 5-20: Installation of fieldbuses - Installation profiles for CPF 20 | |
| Industrial communication networks - Profiles Part 5-21: Installation of fieldbuses - Installation profiles for CPF 21 | |
| Industrial communication networks - Profiles Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 | |
| Industrial communication networks - Profiles Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 | |
| Industrial communication networks - Profiles Part 5-6: Installation of fieldbuses - Installation profiles for CPF 6 | |
| Industrial communication networks - Profiles Part 5-8: Installation of fieldbuses - Installation profiles for CPF 8 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-19: Installation of fieldbuses - Installation profiles for CPF 19 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-21: Installation of fieldbuses - Installation profiles for CPF 21 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 | |
| Industrial communication networks \x96 Profiles \x96 Part 5-3: Installation of fieldbuses - Installation profiles for CPF 3 | |
| Industrial networks - Profiles \x96 Part 5-22: Installation of fieldbuses - Installation profiles for CPF 22 | |
| Industrial networks - Profiles Part 1-0: Fieldbus profiles - General concepts and terminology | |
| Industrial networks - Profiles Part 1-16: Fieldbus profiles - Communication Profile Family 16 | |
| Industrial networks - Profiles Part 1-19: Fieldbus profiles - Communication Profile Family 19 | |
| Industrial networks - Profiles Part 1-1: Fieldbus profiles - Communication Profile Family 1 | |
| Industrial networks - Profiles Part 1-22: Fieldbus profiles - Communication Profile Family 22 | |
| Industrial networks - Profiles Part 1-2: Fieldbus profiles - Communication Profile Family 2 | |
| Industrial networks - Profiles Part 1-3: Fieldbus profiles - Communication Profile Family 3 | |
| Industrial networks - Profiles Part 1-4: Fieldbus profiles - Communication Profile Family 4 | |
| Industrial networks - Profiles Part 1-5: Fieldbus profiles - Communication Profile Family 5 | |
| Industrial networks - Profiles Part 1-6: Fieldbus profiles - Communication Profile Family 6 | |
| Industrial networks - Profiles Part 1-8: Fieldbus profiles - Communication Profile Family 8 | |
| Industrial networks - Profiles Part 1-9: Fieldbus profiles - Communication Profile Family 9 | |
| Industrial networks - Profiles Part 2-0: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - General concepts and terminology | |
| Industrial networks - Profiles Part 2-10: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 10 | |
| Industrial networks - Profiles Part 2-18: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 18 | |
| Industrial networks - Profiles Part 2-19: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 19 | |
| Industrial networks \x96 Profiles Part 2-11: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 11 | |
| Industrial networks \x96 Profiles Part 2-12: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 12 | |
| Industrial networks \x96 Profiles Part 2-13: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 13 | |
| Industrial networks \x96 Profiles Part 2-14: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 14 | |
| Industrial networks \x96 Profiles Part 2-15: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 15 | |
| Industrial networks \x96 Profiles Part 2-16: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 16 | |
| Industrial networks \x96 Profiles Part 2-17: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 17 | |
| Industrial networks \x96 Profiles Part 2-20: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 20 | |
| Industrial networks \x96 Profiles Part 2-21: Additional real-time fieldbus profiles based on ISO/IEC/IEEE 8802-3 - CPF 21 | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 100: Data base standard for process measurement, control and automation equipment | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 32: Lists of properties (LOP) for I/O modules for electronic data exchange | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues \x96 Part 1: Generic structures for measuring equipment | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues \x96 Part 41: Lists of properties (LOPs) of process analysers for electronic data exchange - Generic structures... | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues Part 31: List of Properties (LOPs) of infrastructure devices for electronic data exchange - Generic structures | |
| Industrial-process measurement and control - Data structures and elements in process equipment catalogues Part 92: Lists of properties (LOP) of measuring equipment for electronic data exchange - Aspect LOPs | |
| Instrument transformers - Part 15: Additional requirements for voltage transformers for DC applications | |
| Instrument transformers \x96 Part 1: General requirements | |
| Instrument transformers \x96 Part 20: Safety requirements of instrument transformers for high voltage applications | |
| Instrument transformers Part 10: Additional requirements for low-power passive current transformers | |
| Instrument transformers Part 11: Additional requirements for low-power passive voltage transformers | |
| Instrument transformers Part 13: Stand-alone merging unit (SAMU) | |
| Instrument transformers Part 14: Additional requirements for current transformers for DC applications | |
| Instrument transformers Part 99: Glossary | |
| Instrument Transformers Part 9: Digital interface for instrument transformers | |
| Insulators for overhead lines - Composite line post insulators for AC systems with a nominal voltage greater than 1 000 V Part 1: definitions, end fittings and designations | |
| Integrated circuit - EMC evaluation of transceivers Part 6: PSI5 transceivers | |
| Integrated circuits - EMC evaluation of transceivers \x96 Part 3: CAN transceivers | |
| Integrated circuits - EMC evaluation of transceivers Part 1: General conditions and definitions | |
| integrated circuits - EMC evaluation of transceivers Part 3: CAN transceivers | |
| Integrated circuits - EMC evaluation of transceivers Part 5: Ethernet transce | |
| Integrated circuits - EMC evaluation of transceivers Part 7: CXPI transceivers | |
| Integrated circuits - Measurement of electromagnetic emissions Part 1: General conditions and definitions | |
| Integrated circuits - Measurement of electromagnetic emissions Part 4: Measurement of conducted emissions - 1 ? /150 ? direct coupling method | |
| Integrated circuits - Measurement of electromagnetic emissions Part 8: Measurement of radiated emissions - IC stripline method | |
| LED modules for general lighting - Safety specifications | |
| Low-voltage surge protective devices \x96 Part 01: General requirements and test methods | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) Part 1: General rules | |
| Maritime navigation and radiocommunication equipment and systems - Automatic Identification Systems (AIS) Part 2: Class A shipborne equipment of the automatic identification system (AIS) - Operational and performance requirements, methods... | |
| Maritime navigation and radiocommunication equipment and systems - Integrated navigation systems (INS) Part 2: Modular structure for INS - Operational and performance requirements, methods of testing and required test results... | |
| Maritime navigation and radiocommunication equipment and systems - Presentation of navigation-related information on shipborne navigational displays - General requirements, methods of testing and required test results | |
| Mechanical structures for electrical and electronic equipment - Outdoor enclosures Part 1: Design guidelines | |
| Mechanical structures for electrical and electronic equipment - Outdoor enclosures Part 3: Environmental requirements, tests and safety aspects | |
| Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series Part 1: Environmental requirements, test setups and safety aspects | |
| Mechanical structures for electrical and electronic equipment - Tests for IEC 60917 and IEC 60297 series Part 6: Security aspects for indoor cabinets | |
| Medical electrical equipment - Characteristics of digital X-ray imaging devices \x96 Part 2-1: Determination of dual-energy subtraction efficiency - Detectors used for dual-energy radiographic imaging | |
| Medical electrical equipment - Dosimeters with ionization chambers and/or semiconductor detectors as used in X-ray diagnostic imaging | |
| Medical electrical equipment - Dosimetric instruments used for non-invasive measurement of X-ray tube voltage in diagnostic radiology | |
| Metallic cables and other passive components test methods \x96 Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial... | |
| Metallic cables and other passive components test methods Part 4-15: Electromagnetic compatibility (EMC) - Test method for measuring transfer impedance and screening attenuation - or coupling attenuation with triaxial cell... | |
| Metallic cables and other passive components test methods Part 4-7: Electromagnetic compatibility (EMC) - Test method for measuring of transfer impedance ZT and screening attenuation aS or coupling attenuation aC... | |
| Metallic communication cable test methods Part 4-5: Electromagnetic compatibility (EMC) - Screening or coupling attenuation - Absorbing clamp method | |
| Multimedia systems - Guide to the recommended characteristics of analogue interfaces to achieve interoperability | |
| Nuclear instrumentation - Housed scintillators - Test methods of light output and intrinsic resolution | |
| Nuclear power plants - Instrumentation and control systems important to safety - Software aspects for computer-based systems performing category B or C functions | |
| Nuclear power plants - Instrumentation, control and electrical power systems - Requirements for electromagnetic compatibility testing | |
| Obsolescence management | |
| Overhead lines - Requirements and tests for aeolian vibration dampers | |
| Overhead lines - Requirements and tests for spacers | |
| Passive RF and microwave devices, intermodulation level measurement Part 1: General requirements and measuring methods | |
| Passive RF and microwave devices, intermodulation level measurement Part 2: Measurement of passive intermodulation in coaxial cable assemblies | |
| Passive RF and microwave devices, intermodulation level measurement Part 3: Measurement of passive intermodulation in coaxial connectors | |
| Passive RF and microwave devices, intermodulation level measurement Part 5: Measurement of passive intermodulation in filters | |
| Passive RF and microwave devices, intermodulation level measurement Part 6: Measurement of passive intermodulation in antennas | |
| Passive rf and microwave devices, intermodulation level measurement Part 7: Field measurements of passive intermodulation | |
| Passive RF and microwave devices, intermodulation level measurement Part 8: Measurement of passive intermodulation generated by objects exposed to RF radiation | |
| Photovoltaic (PV) module performance testing and energy rating Part 3: Energy rating of PV modules | |
| Photovoltaic (PV) module performance testing and energy rating Part 4: Standard reference climatic profiles | |
| Photovoltaic (PV) module safety qualification Part 1: Requirements for construction | |
| Photovoltaic (PV) module safety qualification Part 2: Requirements for testing | |
| Photovoltaic (PV) modules - Salt mist corrosion testing | |
| Photovoltaic system performance Part 1: Monitoring | |
| Photovoltaic system power conversion equipment - Design qualification and type approval | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 1: General requirements | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 2: Dimensional compatibility requirements for AC pin and contact-tube accessories | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 3: Dimensional compatibility requirements for DC and AC/DC pin and contact-tube vehicle couplers | |
| Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles Part 6: Dimensional compatibility requirements for DC pin and contact-tube vehicle couplers for DC EV supply equipment... | |
| Power capacitors - Low-voltage power factor correction banks | |
| Power installations exceeding 1 kV a.c. \x96 Part 1: Common rules | |
| Power installations exceeding 1 kV AC and 1,5 kV DC - Part 2: DC | |
| Power installations exceeding 1 kV AC and 1,5 kV DC \x96 Part 1: AC | |
| Power installations exceeding 1 kV AC and 1,5 kV DC Part 1: AC | |
| Power systems management and associated information exchange - Data and communications security - Part 3: Communication network and system security - Profiles including TCP/IP | |
| Power systems management and associated information exchange - Data and communications security - Part 9: Cyber security key management for power system equipment | |
| Power systems management and associated information exchange - Data and communications security Part 4: Profiles including MMS and derivatives | |
| Power systems management and associated information exchange - Data and communications security Part 5: Security for IEC 60870-5 and derivatives | |
| Power systems management and associated information exchange - Data and communications security Part 6: Security for IEC 61850 | |
| Power systems management and associated information exchange - Data and communications security Part 8: Role-based access control for power system management | |
| Process management for avionics - Management plan Part 1: Preparation and maintenance of an electronic components management plan | |
| Protection against lightning \x96 Part 1: General principles | |
| Protection against lightning \x96 Part 2: Risk management | |
| Protection against lightning \x96 Part 3: Physical damage to structures and life hazard | |
| Protection against lightning \x96 Part 4: Electrical and electronic systems within structures | |
| Radiation protection instrumentation - Alarming personal radiation devices (PRDs) for the detection of illicit trafficking of radioactive material | |
| Radiation protection instrumentation - Dosimetry systems with integrating passive detectors for individual, workplace and environmental monitoring of photon and beta radiation | |
| Radiation protection instrumentation - Equipment for measuring the activity concentration of gamma-emitting radionuclides in foodstuffs | |
| Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation | |
| Radiation protection instrumentation - Installed radiation portal monitors (RPMs) for the detection of illicit trafficking of radioactive and nuclear materials | |
| Radionuclide imaging devices - Characteristics and test conditions Part 1: Positron emission tomographs | |
| Railway applications - Urban guided transport management and command/control systems \x96 Part 1: System principles and fundamental concepts | |
| Railway applications - Urban guided transport management and command/control systems Part 2: Functional requirements specification | |
| Railway applications - Urban guided transport management and command/control systems Part 3: System requirements specifications | |
| Reed switches Part 1-1: Generic specification - Blank detail specification | |
| Reed switches Part 4: Application in conjunction with magnetic actuator used for magnetic sensing devices | |
| Resistance welding equipment Part 2: Electromagnetic compatibility (EMC) requirements | |
| Safety of machinery - Application of protective equipment to detect the presence of persons | |
| Safety of machinery - Functional safety of safety-related control systems | |
| Safety of power converters for use in photovoltaic power systems Part 3: Particular requirements for electronic devices in combination with photovoltaic elements | |
| Safety of primary and secondary lithium cells and batteries during transport | |
| Safety of transformers, reactors, power supply units and combination thereof - Part 2-12: Particular requirements and tests for constant voltage transformers and power supply units for constant voltage | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-10: Particular requirements and tests for separating transformers with high insulation level and separating transformers with output voltages... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-13: Particular requirements and tests for auto-transformers and power supply units incorporating auto-transformers for general applications | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-14: Particular requirements and tests for variable transformers and power supply units incorporating variable transformers for general applications... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-15: Particular requirements and tests for isolating transformers for medical IT systems for the supply of medical locations... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating transformers for general applications | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-20: Particular requirements and tests for small reactors | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-2: Particular requirements and tests for control transformers and power supply units incorporating control transformers | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-3: Particular requirements and tests for ignition transformers for gas and oil burners | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating isolating transformers for general applications... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-5: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers for... | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-7: Particular requirements and tests for transformers and power supply units for toys | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-8: Particular requirements and tests for transformers and power supply units for bells and chimes | |
| Safety of transformers, reactors, power supply units and combinations thereof - Part 2-9: Particular requirements and tests for transformers and power supply units for class III handlamps | |
| Safety of transformers, reactors, power supply units and combinations thereof Part 1: General requirements and tests | |
| Secondary cells and batteries containing alkaline or other nonacid electrolytes - Secondary lithium cells and batteries for portable applications Part 4: Coin secondary lithium cells, and batteries made from them... | |
| Security for industrial automation and control systems \x96 Part 2-1: Security program requirements for IACS asset owners | |
| Security for industrial automation and control systems Part 2-4: Security program requirements for IACS service providers | |
| Security for industrial automation and control systems Part 3-2: Security risk assessment for system design | |
| Single crystal wafers for surface acoustic wave (SAW) device applications - Specifications and measuring methods | |
| Solid-state relays - Safety requirements | |
| Static VAR compensators (SVC) - Testing of thyristor valves | |
| Superconductivity \x96 Part 27: Twist pitch measurement of practical superconducting wires - Twist pitch measurement of Nb-Ti/Cu and Nb-Sn/Cu composite superconductors | |
| Superconductivity Part 17: Electronic characteristic measurements - Local critical current density and its distribution in large-area superconducting films | |
| Superconductivity Part 22-2: Normal state resistance and critical current measurement - High-Tc Josephson junction | |
| Superconductivity Part 22-3: Superconducting strip photon detector - Dark count rate | |
| Superconductivity Part 23: Residual resistance ratio measurement - Residual resistance ratio of Nb superconductors | |
| Superconductivity Part 24: Critical current measurement - Retained critical current after double bending at room temperature of Ag-sheathed Bi-2223 superconducting wires | |
| Superconductivity Part 25: Mechanical properties measurement - Room temperature tensile test on REBCO wires | |
| Superconductivity Part 26: Critical current measurement - DC critical current of RE-Ba-Cu-O composite superconductors | |
| Superconductivity Part 4: Residual resistance ratio measurement - Residual resistance ratio of Nb-Ti and Nb3Sn composite superconductors | |
| Superconductivity Part 7: Electronic characteristic measurements - Surface resistance of high-temperature superconductors at microwave frequencies | |
| Surface mounted piezoelectric devices for frequency control and selection - Standard outlines and terminal lead connections Part 2: Ceramic enclosures | |
| Surface mounting technology Part 1: Standard method for the specification of surface mounting components (SMDs) | |
| Surface mounting technology Part 2: Transportation and storage conditions of surface mounting devices (SMD) - Application guide | |
| Surface mounting technology Part 3: Standard method for the specification of components for throughhole reflow (THR) soldering | |
| Test method for the mechanical strength of cores made of magnetic oxides | |
| Time relays and coupling relays for industrial and residential use \x96 Part 1: Requirements and tests | |
| Transformers, power supplies, reactors and similar products - EMC requirements | |
| Ultrasonics - Hydrophones \x96 Part 2: Calibration for ultrasonic fields | |
| Ultrasonics - Hydrophones Part 1: Measurement and characterization of medical ultrasonic fields | |
| Ultrasonics - Hydrophones Part 3: Properties of hydrophones for ultrasonic fields | |
| Ultrasonics - Physiotherapy systems - Field specifications and methods of measurement in the frequency range 0,5 MHz to 5 MHz | |
| Ultrasonics - Surgical systems - Measurement and declaration of the basic output characteristics | |
| Ultrasonics - Therapeutic focused short pressure pulse sources - Characteristics of fields | |
| Ultrasonics - Transducers - Definitions and measurement methods regarding focusing for the transmitted fields | |
| Uninterruptible power systems (UPS) - Part 1: Safety requirements | |
| Uninterruptible power systems (UPS) Part 1: Safety requirements | |
| Uninterruptible power systems (UPS) Part 2: Electromagnetic compatibility (EMC) requirements | |
| Uninterruptible power systems (UPS) Part 3: Method of specifying the performance and test requirements |
| << Prev | Next >> |