Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
720
730
740
750
760
770
776
777
778
779
780
781
782
783
784
785
786
787
788
790
800
810
820
830
840
850
900
950
1000
1050
1100
1500
1620
| Product Name | Notes |
|---|---|
| A.C motor capacitors Part 2: Motor start capacitors | |
| AC motor capacitors Part 1: General - Performance, testing and rating - Safety requirements - Guidance for installation and operation | |
| Analogue audio disk records and reproducing equipment | |
| Basic and safety principles for man-machine interface, marking and identification Coding principles for indicators and actuators | |
| Calculation of the effective parameters of magnetic piece parts | |
| Characteristics of electric infra-red emitters for industrial heating - Part 1: Short wave infra-red emitters | |
| Conductors of insulated cables | |
| Connectors for frequencies below 3 MHz - Part 17: Detail specification for interconnection devices which permit multi-directional mating, for use with rechargeable batteries | |
| Connectors for frequencies below 3 MHz - Part 9: Circular connectors for radio and associated sound equipment | |
| Definitions and nomenclature for carbon brushes, brush-holders, commutators and slip-rings | |
| Dependability management - Part 3-14: Application guide - Maintenance and maintenance support | |
| Dependability management - Part 3-1: Application guide - Analysis techniques for dependability - Guide on methodology | |
| Dependability management - Part 3-2: Application guide - Collection of dependability data from the field | |
| Dependability management - Part 3-3: Application guide - Life cycle costing | |
| Dependability management Part 1: Guidance for management and application | |
| Dependability management Part 2: Guidance for dependability management | |
| Dependability management Part 3-11: Application guide - Reliability centred maintenance | |
| Dependability management Part 3-12: Application guide - Integrated logistic support | |
| Dependability management Part 3-15: Application guide - Engineering of system dependability | |
| Dependability management Part 3-16: Application guide - Guidelines for the specification of maintenance support services | |
| Dependability management Part 3-4: Application guide - Guide to the specification of dependability requirements | |
| Dimensions of pot-cores made of magnetic oxides and associated parts | |
| Double-capped fluorescent lamps - Performance specifications | |
| Double-capped fluorescent lamps Performance specifications | |
| Edison screw lampholders | |
| Electric cables - Tests on extruded oversheaths with a special protective function | |
| Electric irons for household or similar use - Methods for measuring performance | |
| Electric strength of insulating materials - Test methods Part 1: Tests at power frequencies | |
| Electric strength of insulating materials - Test methods Part 2: Additional requirements for tests using direct voltage | |
| Electric strength of insulating materials - Test methods Part 3: Additional requirements for 1,2/50 \xb5s impulse tests | |
| Electrical installations in ships - Part 507: Pleasure craft | |
| Electrical insulating materials - Thermal endurance properties - Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria | |
| Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics | |
| Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens | |
| Electrical insulating materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 \xb0C | |
| Electrical insulating materials - Thermal endurance properties - Part 4-3: Ageing ovens - Multi-chamber ovens | |
| Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTE) of an insulating material using the fixed time frame method | |
| Electrical insulating materials - Thermal endurance properties \x96 Part 2: Determination of thermal endurance properties of electrical insulating materials - Choice of test criteria | |
| Electrical insulating materials - Thermal endurance properties Part 1: Ageing procedures and evaluation of test results | |
| Electrical insulating materials - Thermal endurance properties Part 5: Determination of relative thermal endurance index (RTE) of an insulating material | |
| Electrical insulating materials - Thermal endurance properties Part 8: Instructions for calculating thermal endurance characteristics using simplified procedures | |
| Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 1: Vibration tests (sinusoidal) | |
| Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 2: Shock and bump tests | |
| Electrical relays - Part 21: Vibration, shock, bump and seismic tests on measuring relays and protection equipment - Section 3: Seismic tests | |
| Electrical relays - Part 24: Common format for transient data exchange (COMTRADE) for power systems | |
| Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment | |
| Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment - Requirements and tests | |
| Electrical relays - Part 8: Thermal electrical relays | |
| Electroacoustics - Hearing aids - Part 7: Measurement of the performance characteristics of hearing aids for production, supply and delivery quality assurance purposes | |
| Electroacoustics - Hearing aids - Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions | |
| Electroacoustics - Hearing aids Part 13: Electromagnetic compatibility (EMC) | |
| Electroacoustics - Hearing aids Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal | |
| Electroacoustics - Hearing aids Part 4: Induction-loop systems for hearing aid purposes - System performance requirements | |
| Environmental testing - Part 2-82: Tests - Test Tx: Whisker test methods for electronic and electric components | |
| Environmental testing - Part 2: Tests - Guidance for solar radiation testing | |
| Environmental testing - Part 3-11: Supporting documentation and guidance Calculation of the uncertainty of conditions in climatic test chambers | |
| Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests | |
| Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers | |
| Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers | |
| Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for test A and B (with load) | |
| Environmental testing - Part 3-8: Supporting documentation and guidance - Selecting amongst vibration tests | |
| Environmental testing - Part 3: Background information - Section 2: Combined temperature/low air pressure tests | |
| Environmental testing - Part 4: Information for specification writers - Test summaries | |
| Environmental testing - Part 5: Guide to drafting of test methods - Terms and definitions | |
| Environmental testing - Parte 3: Guidance - Seismic test methods for equipments | |
| Environmental testing Part 2-83: Tests - Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste | |
| Environmental testing Part 3-13: Supporting documentation and guidance on Test T - Soldering | |
| Environmental testing Part 3-1: Supporting documentation and guidance - Cold and dry heat tests | |
| Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres | |
| Explosive atmospheres - Part 13: Equipment protection by pressurized rooms \x93p\x94 | |
| Explosive atmospheres - Part 15: Equipment protection by type of protection "n" | |
| Explosive atmospheres - Part 18: Equipment protection by encapsulation \x93m\x94 | |
| Explosive atmospheres - Part 28: Protection of equipment and transmission systems using optical radiation | |
| Explosive atmospheres - Part 2: Equipment protection by pressurized enclosure "p" | |
| Explosive atmospheres - Part 30-1: Electrical resistance trace heating - General and testing requirements | |
| Explosive atmospheres \x96 Part 1: Equipment protection by flameproof enclosures "d" | |
| Explosive atmospheres \x96 Part 28: Protection of equipment and transmission systems using optical radiation | |
| Explosive atmospheres \x96 Part 5: Equipment protection by powder filling "q" | |
| Explosive atmospheres \x96 Part 6: Equipment protection by liquid immersion "o" | |
| Explosive atmospheres \x96 Part 7: Equipment protection by increased safety "e" | |
| Explosive atmospheres Part 0: Equipment - General requirements | |
| Explosive atmospheres Part 10-2: Classification of areas - Explosive dust atmospheres | |
| Explosive atmospheres Part 11: Equipment protection by intrinsic safety "i" | |
| Explosive atmospheres Part 14: Electrical installations design, selection and erection | |
| Explosive atmospheres Part 17: Electrical installations inspection and maintenance | |
| Explosive atmospheres Part 18: Equipment protection by encapsulation "m" | |
| Explosive atmospheres Part 19: Equipment repair, overhaul and reclamation | |
| Explosive atmospheres Part 1: Equipment protection by flameproof enclosures "d" | |
| Explosive atmospheres Part 20-1: Material characteristics for gas and vapour classification - Test methods and data | |
| Explosive atmospheres Part 25: Intrinsically safe electrical systems | |
| Explosive atmospheres Part 26: Equipment with equipment protection level (EPL) Ga | |
| Explosive atmospheres Part 27: Fieldbus intrinsically safe concept (FISCO) | |
| Explosive atmospheres Part 29-1: Gas detectors - Performance requirements of detectors for flammable gases | |
| Explosive atmospheres Part 29-2: Gas detectors - Selection, installation, use and maintenance of detectors for flammable gases and oxygen | |
| Explosive atmospheres Part 29-3: Gas detectors - Guidance on functional safety of fixed gas detection systems | |
| Explosive atmospheres Part 29-4: Gas detectors - Performance requirements of open path detectors for flammable gases | |
| Explosive atmospheres Part 2: Equipment protection by pressurized enclosure "p" | |
| Explosive atmospheres Part 30-2: Electrical resistance trace heating - Application guide for design, installation and maintenance | |
| Explosive atmospheres Part 31: Equipment dust ignition protection by enclosure "t" | |
| Explosive atmospheres Part 32-2: Electrostatics hazards - Tests | |
| Explosive atmospheres Part 35-1: Caplights for use in mines susceptible to firedamp - General requirements - Construction and testing in relation to the risk of explosion | |
| Explosive atmospheres Part 35-2: Caplights for use in mines susceptible to firedamp - Performance and other safety-related matters | |
| Explosive atmospheres Part 5: Equipment protection by powder filling "q" | |
| Explosive atmospheres Part 6: Equipment protection by oil immersion \x93o\x94 | |
| Explosive atmospheres Part 7: Equipment protection by increased safety "e" | |
| Fixed resistors for use in electronic equipment Part 1: Generic specification | |
| Fixed resistors for use in electronic equipment Part 2: Sectional specification: Leaded fixed low power film resistors | |
| Fixed resistors for use in electronic equipment Part 8-1: Blank detail specification: Fixed surface mount (SMD) low power film resistors for general electronic equipment, classification level G | |
| Fixed resistors for use in electronic equipment Part 8: Sectional specification - Fixed surface mount resistors | |
| Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification - Fixed surface mount resistor networks with individually measurable resistors - Assessment level EZ | |
| Fixed resistors for use in electronic equipment Part 9: Sectional specification - Fixed surface mount resistor networks with individually measurable resistors | |
| Flange per guide d\x92onda - Parte 2: Specifiche particolari di flange per guide d\x92onda rettangolari ordinarie | |
| Flanges for Waveguides - Part 1: General requirements | |
| Flanges for waveguides Part 4: Relevant specifications for flanges for circular waveguides | |
| Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear | |
| Glow-starters for fluorescent lamps | |
| Graphite electrodes for electric arc furnaces - Dimensions and designation | |
| Grid systems for printed circuits | |
| Hearing aids - Part 0: Measurement of electroacoustical characteristics | |
| Hearing aids - Part 14: Specification of a digital interface | |
| Hearing aids - Part 1: Hearing aids with induction pick-up coil input | |
| Hearing aids - Part 2: Hearing aids with automatic gain control circuits | |
| Hearing aids - Part 6: Characteristics of electrical input circuits for hearing aids | |
| High pressure mercury vapour lamps - Performance specifications | |
| High-pressure mercury vapour lamps - Performance specifications | |
| High-voltage fuses Part 1: Current-limiting fuses | |
| High-voltage switches - Part 2: High-voltage switches for rated voltages of 52 kV and above | |
| High-voltage test techniques - Partial discharge measurements | |
| Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides | |
| Hollow metallic waveguides Part 1: General requirements and measuring methods | |
| Hollow metallic waveguides Part 2: Relevant specifications for ordinary rectangular waveguides | |
| Household electric blankets - Methods for measuring performance | |
| Hydraulic turbines - Testing of control systems | |
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests | |
| IEC standard frequencies | |
| Impulse tests on cables and their accessories | |
| Insulated bushings for alternating voltages above 1 000 V | |
| Insulated bushings for alternating voltages above 1000 V | |
| Insulating liquids - Determination of the breakdown voltage at power frequency - Test method | |
| Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity | |
| Insulation co-ordination - Part 1: Definitions, principles and rules | |
| Insulation co-ordination - Part 2: Application guide | |
| Insulation co-ordination Part 1: Definitions, principles and rules | |
| Insulation co-ordination Part 5: Procedures for high-voltage direct current (HVDC) converter stations | |
| Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for a.c. systems - Characteristics of insulator units of the cap and pin... | |
| Lead acid traction batteries - Part 1: General requirements and methods of tests | |
| Lead-acid starter batteries - Part 4: Dimensions of batteries for heavy commercial vehicles | |
| Lead-acid traction batteries - Part 2: Dimensions of cells and terminals and marking of polarity on cells | |
| Low pressure sodium vapour lamps - Performance requirements | |
| Low-voltage fuses Part 1: General requirements | |
| Low-voltage fuses Part 4: Supplementary requirements for fuse-links for the protection of semiconductor devices | |
| Low-voltage fuses Part 6: Supplementary requirements for fuse-links for the protection of solar photovoltaic energy systems | |
| Magnetic tape sound recording and reproducing systems - Part 1: General conditions and requirements | |
| Magnetic tape sound recording and reproducing systems - Part 3: Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape | |
| Magnetic tape sound recording and reproducing systems - Part 4: Mechanical magnetic tape properties | |
| Magnetic tape sound recording and reproducing systems - Part 5: Electrical magnetic tape properties | |
| Magnetic tape sound recording and reproducing systems - Part 7: Cassette for commercial tape records and domestic use | |
| Magnetic tape sound recording and reproducing systems Part 2: Calibration tapes | |
| Magnetic tape sound recording and reproducing systems Part 4: Mechanical magnetic tape properties | |
| Magnetic tape sound recording and reproducing systems Part 5: Electrical magnetic tape properties | |
| Magnetic tape sound recording and reproducing systems Part 7: Cassette for commercial tape records and domestic use | |
| Measurement of the dimensions of a cylindrical component with axial terminations | |
| Measuring relays and protection equipment - Part 151: Functional standard for over/under current protection | |
| Measuring relays and protection equipment Part 11: Voltage dips, short interruptions, variations and ripple on auxiliary power supply port | |
| Measuring relays and protection equipment Part 121: Functional requirements for distance protection | |
| Measuring relays and protection equipment Part 127: Functional requirements for over/under voltage protection | |
| Measuring relays and protection equipment Part 149: Functional requirements for thermal electrical relays | |
| Measuring relays and protection equipment Part 1: Common requirements | |
| Measuring relays and protection equipment Part 22-2: Electrical disturbance tests - Electrostatic discharge tests | |
| Measuring relays and protection equipment Part 22-3: Electrical disturbance tests - Radiated electromagnetic field immunity | |
| Measuring relays and protection equipment Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test | |
| Measuring relays and protection equipment Part 22-5: Electrical disturbance tests - Surge immunity test | |
| Measuring relays and protection equipment Part 26: Electromagnetic compatibility requirements | |
| Measuring relays and protection equipment Part 27: Product safety requirements | |
| Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices | |
| Mechanical standardization of semiconductor devices - Part 6-16: Glossary of semiconductor tests and burn-in sockets for BGA, LGA, FBGA and FLGA | |
| Mechanical standardization of semiconductor devices - Part 6-1: General rules for the preparation of outline drawings of surface mounted semiconductor device packages -Design guide for gull-wing lead terminals | |
| Mechanical standardization of semiconductor devices Part 4: Coding system and classification into forms of package outlines for semiconductor device packages | |
| Mechanical standardization of semiconductor devices Part 6-10: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Dimensions of P-VSON | |
| Mechanical standardization of semiconductor devices Part 6-12: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guidelines for fine-pitch land grid array (FLGA)... | |
| Mechanical standardization of semiconductor devices Part 6-13: Design guideline of open-top type sockets for Fine-pitch Ball Grid Array and Fine-pitch Land Grid Array (FBGA/FLGA) | |
| Mechanical standardization of semiconductor devices Part 6-17: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for stacked packages - Fine-pitch ball... | |
| Mechanical standardization of semiconductor devices Part 6-18: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for ball grid array (BGA) | |
| Mechanical standardization of semiconductor devices Part 6-19: Measurement methods of the package warpage at elevated temperature and the maximum permissible warpage | |
| Mechanical standardization of semiconductor devices Part 6-20: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline... | |
| Mechanical standardization of semiconductor devices Part 6-21: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of small outline... | |
| Mechanical standardization of semiconductor devices Part 6-22: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for semiconductor packages Silicon Fine-pitch Ball... | |
| Mechanical standardization of semiconductor devices Part 6-2: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for 1,50 mm, 1,27 mm and... | |
| Mechanical standardization of semiconductor devices Part 6-3: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of quad flat... | |
| Mechanical standardization of semiconductor devices Part 6-4: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Measuring methods for package dimensions of ball grid... | |
| Mechanical standardization of semiconductor devices Part 6-5: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine-pitch ball grid array (FBGA)... | |
| Mechanical standardization of semiconductor devices Part 6-6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for fine pitch land grid array... | |
| Mechanical standardization of semiconductor devices Part 6-8: General rules for the preparation of outline drawings of surface mounted semiconductor device packages - Design guide for glass sealed ceramic quad flatpack... | |
| Mechanical standardization of semiconductor devices Part 6: General rules for the preparation of outline drawings of surface mounted semiconductor device packages | |
| Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-109: Dimensions of chassis for embedded computing devices | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-100: Basic dimensions of front panels, subracks, chassis, racks and cabinets | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-104: Connector dependent interface dimensions of subracks and plug-in units | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-105: Dimensions and design aspects for 1U chassis | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-106: Adaptation dimensions for subracks and chassis applicable with metric cabinets or... | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-107: Dimensions of subracks and plug-in units, small form factor | |
| Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series Part 3-108: Dimensions of R-type subracks and plug-in units | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials | |
| Method of measurement for radio transmitters - Part 9: Performance characteristics for television transposers | |
| Method of measurement of current noise generated in fixed resistors | |
| Methods of measurement for radio transmitters - Part 10: Methods of measurement for television transmitters and transposers employing intertion test signals | |
| Methods of measurement for radio transmitters - Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting - Characteristics to be specified | |
| Methods of measurement for radio transmitters - Part 12: Guideline for drawing up descriptive leaflets for transmitters and transposers for sound and television broadcasting - Specification sheets | |
| Methods of measurement for radio transmitters - Part 13: Performance characteristics for FM sound broadcasting | |
| Methods of measurement for radio transmitters - Part 14: External intermodulation products caused by two or more transmitters using the same or adjacent antennas | |
| Methods of measurement for radio transmitters - Part 15: Amplitude-modulated transmitters for sound broadcasting | |
| Methods of measurement for radio transmitters - Part 1: General characteristics for broadcast transmitters | |
| Methods of measurement for radio transmitters - Part 5: Performance characteristics of television transmitters | |
| Methods of measurement for radio transmitters - Part 8: Performance characteristics of vestigial-sideband demodulators used for testing television transmitters and transposers | |
| Methods of measurement on radio receivers for various classes of emission - Part 3: Receivers for amplitude-modulated sound-broadcasting emissions | |
| Methods of measurement on radio receivers for various classes of emission - Part 4: Receivers for frequency-modulated sound broadcasting emissions | |
| Methods of measurement on radio receivers for various classes of emission - Part 7: Methods of measurement on digital satellite radio (DSR) receivers | |
| Methods of measurement on receivers for television - Part 7: HDTV displays | |
| Methods of measurement on receivers for television broadcast transmissions - Part 1: General considerations - Measurements at radio and video frequencies | |
| Methods of measurement on receivers for television broadcast transmissions - Part 2: Audio channels - General methods and methods for monophonic channels | |
| Methods of measurements for radio transmitters - Part 11: Transposers for FM sound broadcasting | |
| Miniature fuses - Part 10: User guide for miniature fuses | |
| Miniature fuses - Part 2: Cartridge fuse-links | |
| Miniature fuses - Part 3: Sub-miniature fuse-links | |
| Miniature fuses - Part 4: Universal Modular Fuse-links (UMF) - Through-hole and surface mount types | |
| Miniature fuses - Part 5: Guidelines for quality assessment of miniature fuse-links | |
| Miniature fuses Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| Miniature fuses Part 2: Cartridge fuse-links | |
| Miniature fuses Part 3: Sub-miniature fuse-links | |
| Miniature fuses Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types | |
| Miniature fuses Part 6: Fuse-holders for miniature fuse-links | |
| Miniature fuses Part 7: Miniature fuse-links for special applications | |
| Normalizzazione meccanica dei dispositivi a semiconduttore - Parte 3: Regole generali per la preparazione dei disegni dello schema dei circuiti integrati | |
| Packaging of components for automatic handling - Part 1: Tape packaging of components with axial leads on continuous tapes | |
| Packaging of components for automatic handling Part 1: Tape packaging of components with axial leads on continuous | |
| Packaging of components for automatic handling Part 2: Packaging of components with unidirectional leads on continuous tapes | |
| Packaging of components for automatic handling Part 3-1: Packaging of surface mount components on continuous tapes Type V - Pressed carrier tapes | |
| Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes Type VI - Blister carrier tapes of 4 mm width | |
| Packaging of components for automatic handling Part 3: Packaging of surface mount components on continuous tapes | |
| Packaging of components for automatic handling Part 4: Stick magazines for electronic components encapsulated in packages of different forms | |
| Packaging of components for automatic handling Part 5: Matrix trays | |
| Packaging of components for automatic handling Part 6: Bulk case packaging for surface mounting components | |
| Packaging of winding wires - Part 1: Containers for round winding wires | |
| Packaging of winding wires - Part 2-1: Cylindrical barrelled delivery spools - Basic dimensions | |
| Packaging of winding wires - Part 2-2: Cylindrical barrelled delivery spools - Specification for returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 2-3: Cylindrical barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 2: Specification for returnable spools made from thermoplastic materials | |
| Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 2: Cylindrical barrelled delivery spools - Section One: Basic dimensions | |
| Packaging of winding wires - Part 3-1: Taper barrelled delivery spools - Basic dimensions | |
| Packaging of winding wires - Part 3-2: Taper barrelled delivery spools - Specification for returnable spools made from thermoplastic materials | |
| Packaging of winding wires - Part 3-3: Taper barrelled delivery spools - Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 3-4: Taper barrelled delivery spools - Basic dimensions of containers for taper barrelled delivery spools | |
| Packaging of winding wires - Part 3-5: Taper barrelled delivery spools - Specification for spool containers made from thermoplastic material | |
| Packaging of winding wires - Part 3: Taper barrelled delivery spools - Section 3: Specification for non-returnable spools made from thermoplastic material | |
| Packaging of winding wires - Part 4-2: Methods of test - Containers made from thermoplastic material for taper barrelled delivery spools | |
| Packaging of winding wires - Part 4: Methods of test - Section 2: Containers made from thermoplastic material for taper barrelled delivery spools | |
| Packaging of winding wires - Part 5-1: Cylindrical barelled delivery spools with conical flanges - Basic dimensions | |
| Packaging of winding wires - Part 5-2: Cylindrical barrelled delivery spools with conical flanges Specification for returnable spools made from thermoplastic material | |
| Packaging of winding wires Part 1: Containers for round winding wires | |
| Packaging of winding wires Part 4-1: Methods of test - Delivery spools made from thermoplastic materials | |
| Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements | |
| Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories | |
| Plugs, socket-outlets and couplers for industrial purposes - Part 4: Switched socket-outlets and connectors with or without interlock | |
| Plugs, socket-outlets and couplers for industrial purposes Part 1: General requirements | |
| Plugs, socket-outlets and couplers for industrial purposes Part 2: Dimensional interchangeability requirements for pin and contacttube accessories | |
| Plugs, socket-outlets and couplers for industrial purposes Part 4: Switched socket-outlets and connectors with or without interlock | |
| Power capacitors for induction heating installations - Part 1: General | |
| Power transformer Part 22-2: Power transformer and reactor fittings - Removable radiators | |
| Power transformers - Part 10: Determination of sound levels | |
| Power transformers - Part 13: Self protected liquid filled transformers | |
| Power transformers - Part 4: Guide to lightning impulse and switching impulse testing - Power transformers and reactors | |
| Power transformers - Part 5: Ability to withstand short circuit | |
| Power transformers Part 14: Liquid-immersed power transformers using high-temperature insulation materials | |
| Power transformers Part 16: Transformers for wind turbines applications | |
| Power transformers Part 18: Measurement of frequency response | |
| Power transformers Part 19: Rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors | |
| Power transformers Part 1: General | |
| Power transformers Part 2: Temperature rise for liquid-immersed transformers | |
| Power transformers Part 3: Insulation levels, dielectric tests and external clearances in air | |
| Power transformers Part 6: Reactors | |
| Preferred diameters of wire terminations of capacitors and resistors | |
| Preparation of outline drawings for cathode-ray tubes, their components, connections and gauges | |
| Primary batteries Part 1: General | |
| Primary batteries Part 2: Physical and electrical specifications | |
| Primary batteries Part 3: Watch batteries | |
| Primary batteries Part 4: Safety of lithium batteries | |
| Primary batteries Part 5: Safety of batteries with aqueous electrolyte | |
| Printed board design, manufacture and assembly - Terms and definitions | |
| Quartz crystal units of assessed quality Part 1: Generic specification | |
| Quartz crystal units of assessed quality Part 3: Standard outlines and lead connections | |
| Radio-frequency connectors - Part 21: Two types of radio-frequency connectors with inner diameter of outer conductor 9,5 mm (0,374 in) with different versions of screw coupling - Characteristic impedance 50... | |
| Radio-frequency connectors - Part 23: Pin and sicket connector for use with 3,5 mm rigid precision coaxial lines with inner diameter of outer conductor 3,5 mm (0,1378 in) | |
| Radio-frequency connectors - Part 24: Radio-frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable distribution systems (Type F) | |
| Radio-frequency connectors - Part 25: Two-pole screw (3/4-20 UNEF) coupled connectors for use with shielded balanced cables having twin inner conductors with inner diameter of outer conductor 13,56 mm (0,534... | |
| Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules | |
| Railway applications - Electric equipment for rolling stock - Part 2: Electrotechnical components - General rules | |
| Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for d.c. circuit-breakers | |
| Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers | |
| Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses | |
| Railway applications - Traction transformers and inductors on board rolling stock | |
| Reactors | |
| Recommended methods of measurement on receivers for television broadcast transmissions - Part 5: Electrical measurements on multichannel sound television receivers using the NICAM two-channel digital sound-system | |
| Recommended methods of measurement on receivers for television broadcast transmissions - Part 8: Measurement on D2-MAC/packet equipment | |
| Safety of machinery - Electrical equipment of machines - Part 11: Requirements for HV equipment for voltages above 1000 V a.c. or 1500 V d.c. and not exceeding 36 kV... | |
| Safety of machinery - Electrical equipment of machines \x96 Part 1: General requirements | |
| Safety of machinery - Electrical equipment of machines Part 11: Requirements for HV equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36... | |
| Safety of machinery - Electrical equipment of machines Part 1: General requirements | |
| Safety of machinery - Electrical equipment of machines Part 31: Particular safety and EMC requirements for sewing machines, units and systems | |
| Safety of machinery - Electrical equipment of machines Part 32: Requirements for hoisting machines | |
| Safety of machinery - Electrical equipment of machines Part 33: Requirements for semiconductor fabrication equipment | |
| Safety requirements for radio transmitting equipment | |
| Semiconductor converters - General requirements and line commutated converters Part 1-1: Specification of basic requirements | |
| Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters | |
| Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors | |
| Series capacitors for power systems - Part 1: General | |
| Series capacitors for power systems - Part 3: Internal fuses | |
| Series capacitors for power systems \x96 Part 2: Protective equipment for series capacitor banks | |
| Series capacitors for power systems Part 1: General | |
| Series capacitors for power systems Part 2: Protective equipment for series capacitor banks | |
| Series capacitors for power systems Part 4: Thyristor controlled series capacitors | |
| Sound system equipment - Part 12: Application of connectors for broadcast and similar use | |
| Sound system equipment - Part 5: Loudspeakers | |
| Sound system equipment Part 12: Application of connectors for broadcast and similar use | |
| Sound system equipment Part 16: Objective rating of speech intelligibility by speech transmission index | |
| Sound system equipment Part 3: Amplifiers | |
| Sound system equipment Part 4: Microphones | |
| Sound system equipment Part 5: Loudspeakers | |
| Sound system equipment Part 7: Headphones and earphones | |
| Specifications for particular type of winding wires Part 59: Polyamideimide enameled round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 0-5: General requirements - Glass-fibre braided resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 0-6: General requirement - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-9: General requirements - Enamelled rectangular aluminium wire | |
| Specifications for particular types of winding wires - Part 0: General requirements - Section 4: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 | |
| Specifications for particular types of winding wires - Part 15: Polyesterimide enamelled round aluminium wire, class 180 | |
| Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 | |
| Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 | |
| Specifications for particular types of winding wires - Part 19: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 130 | |
| Specifications for particular types of winding wires - Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 | |
| Specifications for particular types of winding wires - Part 22 : Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires - Part 24: Polyester or polyesterimide enamelled round aluminium wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires - Part 26: Polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 31: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 31: Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 32: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular Types of winding wires - Part 32: Glass-fibre wound, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 32: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 33: Glass-fibre wound resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 33: Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 33: Glass-fibre wound, silicone varnish-treated, bare or anamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer | |
| Specifications for particular types of winding wires - Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires - Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires - Part 38: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200, with a bonding layer | |
| Specifications for particular types of winding wires - Part 39: Glass-fibre braided, polyester or polyesterimide varnish-treated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 39: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 40: Glass-fibre braided, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 40: Glass-fibre braided, silicone varnish-treated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 42: Polyester-amide-imid e enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 46: Aromatic polyimide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires - Part 57: Polyamide-imide enamelled round copper wire, class 220 | |
| Specifications for particular types of winding wires - Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 | |
| Specifications for particular types of winding wires - Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 | |
| Specifications for particular types of winding wires - Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220 | |
| Specifications for particular types of winding wires - Part 7: Polyimide enamelled round copper wire, class 220 | |
| Specifications for particular types of winding wires \x96 Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires \x96 Part 28: Polyesterimide enamelled rectangular copper wire, class 180 | |
| Specifications for particular types of winding wires \x96 Part 57: Polyamide-imide enamelled round copper wire, class 220 | |
| Specifications for particular types of winding wires \x96 Part 58: Polyamide-imide enamelled rectangular copper wire, class 220 | |
| Specifications for particular types of winding wires \x96 Part 59: Polyamide-imide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires \x96 Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 | |
| Specifications for particular types of winding wires Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire | |
| Specifications for particular types of winding wires Part 0-2: General requirements - Enamelled rectangular copper wire | |
| Specifications for particular types of winding wires Part 0-3: General requirements - Enamelled round aluminium wire | |
| Specifications for particular types of winding wires Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm... | |
| Specifications for particular types of winding wires Part 0-8: General requirements - Polyester glass-fibre wound, resin or varnish impregnated or not impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires Part 0-9: General requirements - Enamelled rectangular aluminium wire | |
| Specifications for particular types of winding wires Part 13: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires Part 20: Solderable polyurethane enamelled round copper wire, class 155 | |
| Specifications for particular types of winding wires Part 21: Solderable polyurethane enamelled round copper wire overcoated with polyamide, class 155 | |
| Specifications for particular types of winding wires Part 22: Polyester or polyesterimide enamelled round copper wire overcoated with polyamide, class 180 | |
| Specifications for particular types of winding wires Part 23: Solderable polyesterimide enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 | |
| Specifications for particular types of winding wires Part 27: Paper tape covered rectangular copper wire | |
| Specifications for particular types of winding wires Part 28: Polyesterimide enamelled rectangular copper wire, class 180 | |
| Specifications for particular types of winding wires Part 29: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 200 | |
| Specifications for particular types of winding wires Part 2: Solderable polyurethane enamelled round copper wire, class 130, with a bonding layer | |
| Specifications for particular types of winding wires Part 35: Solderable polyurethane enamelled round copper wire, class 155, with a bonding layer | |
| Specifications for particular types of winding wires Part 36: Solderable polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires Part 37: Polyesterimide enamelled round copper wire, class 180, with a bonding layer | |
| Specifications for particular types of winding wires Part 38: Polyester or polyesterimide overcoated with polyamide-imide enamelled round copper wire, class 200, with a bonding layer | |
| Specifications for particular types of winding wires Part 44: Aromatic polyimide tape wrapped rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires Part 46: Aromatic polyimide enamelled round copper wire, class 240 | |
| Specifications for particular types of winding wires Part 47: Aromatic polyimide enamelled rectangular copper wire, class 240 | |
| Specifications for particular types of winding wires Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires Part 49: Glass-fibre wound high temperature resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Specifications for particular types of winding wires Part 4: Solderable polyurethane enamelled round copper wire, class 130 | |
| Specifications for particular types of winding wires Part 50: Glass-fibre wound silicone resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 | |
| Specifications for particular types of winding wires Part 51: Solderable polyurethane enamelled round copper wire, class 180 | |
| Specifications for particular types of winding wires Part 52: Aromatic polyamide (aramid) tape wrapped round copper wire, temperature index 220 | |
| Specifications for particular types of winding wires Part 53: Aromatic polyamide (aramid) tape wrapped rectangular copper wire, temperature index 220 | |
| Specifications for particular types of winding wires Part 55: Solderable polyurethane enamelled round copper wire overcoated with polyamide, Class 180 | |
| Specifications for particular types of winding wires Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm, class... | |
| Specifications for particular types of winding wires Part 60: Polyester glass fibre wound minimum class 155 resin or varnish impregnated or not impregnated, bare or enamelled, rectangular copper wire, temperature... | |
| Specifications for particular types of winding wires Part 61: Polyester glass fibre wound, minimum class 180, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires Part 62: Polyester glass fibre wound, minimum class 200 resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires Part 67: Polyvinyl acetal enamelled rectangular aluminium wire, class 105 | |
| Specifications for particular types of winding wires Part 68: Polyvinyl acetal enamelled rectangular aluminium wire, class 120 | |
| Specifications for particular types of winding wires Part 69: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 220 | |
| Specifications for particular types of winding wires Part 70: Polyester glass-fibre wound fused, unvarnished or resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires Part 71: Polyester glass-fibre wound fused and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Standard conditions for use prior to and during the testing of solid electrical insulating materials | |
| Strutture meccaniche per equipaggiamenti elettronici - Dimensioni delle strutture meccaniche della serie 482,6 mm (19 pollici) - Parte 3-101: Sottotelai e relative unit\xe0 ad innesto | |
| Strutture meccaniche per equipaggiamenti elettronici - Dimensioni delle strutture meccaniche della serie 482,6 mm (19 pollici) - Parte 3-102: Maniglie per inseritore/estrattor e | |
| Strutture meccaniche per equipaggiamenti elettronici - Dimensioni delle strutture meccaniche della serie 482,6 mm (19 pollici) - Parte 3-103: Codifica e pin di allineamento | |
| Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems | |
| Surge arresters Part 1: Non-linear resistor type gapped surge arresters for a.c. systems | |
| Surge arresters Part 5: Selection and application recommendations | |
| Surge arresters Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV | |
| Tap-changers Part 1: Performance requirements and test methods | |
| Test procedure for the determination of the temperature index of enamelled winding wires | |
| Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1 kV | |
| Tests on indoor and outdoor post insulators of ceramic material or glass for systems with nominal voltages greater than 1000 V | |
| Thermal evaluation and designation of electrical insulation | |
| Vacuum cleaners for household use - Methods of measuring the performance | |
| Vacuum cleaners for household use Part 1: Dry vacuum cleaners - Methods for measuring the performance |
| << Prev | Next >> |