Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
50
60
65
66
67
68
69
70
71
72
73
74
75
76
77
80
90
100
110
120
130
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| A Method of Producing Culinary Steam | |
| AC AND/OR DC-SUPPLIED ELECTRONIC CONTROL GEAR FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS | |
| Alarm and electronic security systems \x96 Part 11-1: Electronic access control systems \x96 System and components requirements | |
| Alarm and electronic security systems \x96 Part 11-2: Electronic access control systems \x96 Application guidelines | |
| Alarm and electronic security systems \x96 Part 11-31: Electronic access control systems \x96 Core interoperability protocol based on Web services | |
| Alarm and electronic security systems \x96 Part 11-32: Electronic access control systems \x96 Access control monitoring based on Web services | |
| Alarm and electronic security systems \x96 Part 11-33: Electronic access control systems \x96 Access control configuration based on Web services | |
| Alarm and electronic security systems \x96 Part 11-5: Electronic access control systems \x96 Open supervised device protocol (OSDP) | |
| Alarm and electronic security systems \x96 Part 5-3: Alarm transmission systems \x96 Requirements for receiving centre transceiver (RCT) | |
| Alarm systems - Part 10: Alarm systems for road vehicles - Section 1: Passenger cars | |
| Alarm systems - Part 2: Requirements for intruder alarm systems - Section 7: Passive glass-break detectors for use in buildings | |
| Alarm systems - Part 5: Requirements for alarm transmission systems - Section 1: General requirements for systems | |
| Alarm systems - Part 5: Requirements for alarm transmission systems - Section 2: General requirements for equipment | |
| Alarm systems - Part 5: Requirements for alarm transmission systems - Section 4: Alarm transmission systems using dedicated alarm transmission paths | |
| Alarm systems - Part 5: Requirements for alarm transmission systems - Section 5: Requirements for digital communicator systems using the public switched telephone network | |
| Alarm systems - Part 5: Requirements for alarm transmission systems - Section 6: Requirements for voice communicator systems using the public switched telephone network | |
| Alarm systems - Part 7-11: Message formats and protocols for serial data interfaces in alarm transmission systems - Serial protocol for use by digital communicator systems using ITU-T Recommandation V.23... | |
| Alarm systems - Part 7-12: Message formats and protocols for serial data interfaces in alarm transmission systems - PTT interfaces for dedicated communications channels using ITU-T Recommendation V.23 signalling | |
| Alarm systems - Part 7-1: Message formats and protocols for serial data interfaces in alarm transmission systems - General | |
| Alarm systems - Part 7-20: Message formats and protocols for serial data interfaces in alarm transmission systems - Terminal interfaces employing ITU-T Recommendation V.24/V.28 signalling | |
| Alarm systems - Part 7-2: Message formats and protocols for serial data interfaces in alarm transmission systems - Common application layer protocol | |
| Alarm systems - Part 7-3: Message formats and protocols for serial data interfaces in alarm transmission systems - Common data link layer protocol | |
| Alarm systems - Part 7-4: Message formats and protocols for serial data interfaces in alarm transmission systems - Common transport layer protocol | |
| Alarm systems - Part 7-5: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm system interfaces employing a two-wire configuration in accordance with ISO/IEC 8482... | |
| Alarm systems - Part 7-6: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm system interfaces employing ITU-T Recommendation V.24/V.28 signalling | |
| Alarm systems - Part 7-7: Message formats and protocols for serial data interfaces in alarm transmission systems - Alarm system interfaces for plug-in alarm system transceivers | |
| Alarm systems. Part 1: General requirements. Section Four: Code of practice | |
| Alarm systems. Part 1: General requirements. Section One: General | |
| Alarm systems. Part 1: General requirements. Section Three: Environmental testing | |
| Alarm systems. Part 1: General requirements. Section Two: Power units, test methods and performance criteria | |
| Alarm systems. Part 2: Requirements for intruder alarm systems. Section Five: Microwave Doppler detectors for use in buildings | |
| Alarm systems. Part 2: Requirements for intruder alarm systems. Section Four: Ultrasonic Doppler detectors for use in buildings | |
| Alarm systems. Part 2: Requirements for intruder alarm systems. Section Six: Passive infra-red detectors for use in buildings | |
| Alarm systems. Part 2: Requirements for intruder alarm systems. Section Three: Requirements for infrared-beam interruption detectors in buildings | |
| Alarm systems. Part 2: Requirements for intruder alarm systems. Section Two: Requirements for detectors - General | |
| Amendment 1 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps \x96 Performance requirements | |
| AMENDMENT 1 Auxiliaries for lamps \x96 Starting devices (other than glow starters) \x96 Performance requirements | |
| AMENDMENT 1 Calculation of the cyclic and emergency current rating of cables \x96 Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of... | |
| Amendment 1 Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36)kV | |
| Amendment 1 Circuit-breakers for equipment (CBE) | |
| AMENDMENT 1 Comfort fans and regulators for household and similar purposes \x96 Methods for measuring performance | |
| AMENDMENT 1 Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 1: Circuit-breakers for a.c. operation | |
| AMENDMENT 1 Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 3: Circuit-breakers for DC operation | |
| AMENDMENT 1 Fixed inductors for electromagnetic interference suppression \x96 Part 2: Sectional specification | |
| AMENDMENT 1 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 3-2: Specifications for individual materials \x96 Requirements for rigid laminated sheets based... | |
| AMENDMENT 1 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 3-3: Specifications for individual materials \x96 Requirements for rigid laminated sheets based... | |
| AMENDMENT 1 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 3-5: Specifications for individual materials \x96 Requirements for rigid laminated sheets based... | |
| AMENDMENT 1 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 3-6: Specifications for individual materials \x96 Requirements for rigid laminated sheets based... | |
| AMENDMENT 1 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 3-7: Specifications for individual materials \x96 Requirements for rigid laminated sheets based... | |
| Amendment 1 Low-Voltage Switchgear and Controlgear - Part 1: General Rules | |
| AMENDMENT 1 Low-voltage switchgear and controlgear \x96 Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| AMENDMENT 1 Low-voltage switchgear and controlgear \x96 Part 4-1: Contactors and motor-starters \x96 Electromechanical contactors and motor-starters | |
| Amendment 1 Low-voltage switchgear and controlgear Part 2: Circuit-breakers | |
| Amendment 1 MARINE NAVIGATIONAL EQUIPMENT - General requirements - Methods of testing and required test results | |
| AMENDMENT 1 Miscellaneous Lampholders - Part 1: General Requirements and Tests | |
| Amendment 1 Miscellaneous lampholders - Part 2: Particular requirements - Section 1: Lampholders S14 | |
| AMENDMENT 1 Miscellaneous lampholders \x96 Part 2-2: Particular requirements - Connectors for LED-modules | |
| AMENDMENT 1 Miscellaneous lampholders \x96 Part 2-3: Particular requirements \x96 Lampholders for double-capped linear LED lamps | |
| AMENDMENT 1 Passive filter units for electromagnetic interference suppression \x96 Part 2: Sectional specification \x96 Passive filter units for which safety tests are appropriate \x96 Test methods and general requirements... | |
| AMENDMENT 1 Photovoltaic devices \x96 Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method | |
| AMENDMENT 1 Plugs and socket-outlets for household and similar purposes \x96 Part 2-7: Particular requirements for cord extension sets | |
| Amendment 1 Plugs and socket-outlets for household and similar purposes Part 1: General requirements | |
| AMENDMENT 1 Safety of laser products \x96 Part 4: Laser guards | |
| Amendment 1 Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 1: General Performance, testing and rating... | |
| Amendment 1 Starting devices (other than glow starters) General and Safety requirements | |
| Amendment 1 Telecontrol Equipment and Systems - Part 5-101: Transmission Protocols - Companion Standard for Basic Telecontrol Tasks | |
| Amendment 1 to Publication 825 (1984) Radiation safety of laser products, equipment classification, requirements and user's guide | |
| Amendment 1 Winding wires - Test methods - Part 1: General | |
| AMENDMENT 1 Winding wires \x96 Test methods \x96 Part 2: Determination of dimensions | |
| AMENDMENT 1 Winding wires \x96 Test methods \x96 Part 3: Mechanical properties | |
| AMENDMENT 1 Winding wires \x96 Test methods \x96 Part 5: Electrical properties | |
| AMENDMENT 2 Calculation of the cyclic and emergency current rating of cables \x96 Part 1: Cyclic rating factor for cables up to and including 18/30 (36) kV | |
| AMENDMENT 2 Circuit-breakers for equipment (CBE) | |
| AMENDMENT 2 Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 3-6: Specifications for individual materials \x96 Requirements for rigid laminated sheets based... | |
| Amendment 2 Low-Voltage Switchgear and Controlgear - Part 1: General Rules | |
| AMENDMENT 2 Low-voltage switchgear and controlgear \x96 Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Amendment 2 Low-voltage switchgear and controlgear Part 2: Circuit-breakers | |
| AMENDMENT 2 Miscellaneous lampholders \x96 Part 1: General requirements and tests | |
| Amendment 2 Miscellaneous lampholders \x96 Part 2-1: Particular requirements \x96 Lampholders S14 | |
| Amendment 2 Plugs and socket-outlets for household and similar purposes Part 1: General requirements | |
| Amendment 2 Safety of laser products - Part I: Equipment classification, requirements and user's guide | |
| AMENDMENT 2 Safety of laser products \x96 Part 2: Safety of optical fibre communication systems (OFCS) | |
| AMENDMENT 2 Safety of laser products \x96 Part 4: Laser guards | |
| Amendment 2 Starting devices (other than glow starters) General and Safety requirements | |
| Amendment 2 Telecontrol Equipment and Systems - Part 5-101: Transmission Protocols - Companion Standard for Basic Telecontrol Tasks | |
| AMENDMENT 2 Winding wires - Test methods - Part 1: General | |
| AMENDMENT 2 Winding wires \x96 Test methods \x96 Part 2: Determination of dimensions | |
| AMENDMENT 2 Winding wires \x96 Test methods \x96 Part 3: Mechanical properties | |
| AMENDMENT 2 Winding wires \x96 Test methods \x96 Part 5: Electrical properties | |
| Amendment 3 Low-Voltage Switchgear and Controlgear - Part 1: General Rules | |
| AMENDMENT 4 Single-capped fluorescent lamps \x96 Performance specifications | |
| AMENDMENT 5 Single-capped fluorescent lamps \x96 Performance specifications | |
| AMENDMENT 6 Single-capped fluorescent lamps \x96 Performance specifications | |
| Analysis Techniques for System Reliability - Procedure for Failure Mode and Effects Analysis (FMEA) First Edition | |
| AUDIO RECORDING - COMPACT DISC DIGITAL AUDIO SYSTEM | |
| Audio Recording - PCM Encoder/Decoder System | |
| Audio, video and audiovisual systems - Interconnections and matching values - Part 3: Interface for the interconnection of ENG cameras and portable VTRs using non-composite signals, for 625 line/50 field... | |
| Audio, video and audiovisual systems - Interconnections and matching values - Part 4: Connector and cordset for domestic digital bus (D2B) | |
| Audio, video and audiovisual systems - Interconnections and matching values - Part 5: Y/C connector for video systems - Electrical matching values and description of the connector | |
| Audio, Video and Audiovisual Systems - Interconnections and Matching Values Part 1: 21-Pin Connector for Video Systems - Application No.1 | |
| Auxiliaries for Lamps - AC Supplied Electronic Ballasts for Tubular Fluorescent Lamps - General and Safety Requirements | |
| Auxiliaries for Lamps - Ballasts for Discharge Lamps (Excluding Tubular Fluorescent Lamps) - General and Safety Requirements | |
| AUXILIARIES FOR LAMPS - BALLASTS FOR DISCHARGE LAMPS (EXCLUDING TUBULAR FLUORESCENT LAMPS) - PERFORMANCE REQUIREMENTS | |
| AUXILIARIES FOR LAMPS - STARTING DEVICES (OTHER THAN GLOW STARTERS) - PERFORMANCE REQUIREMENTS | |
| BALLASTS FOR TUBULAR FLUORESCENT LAMPS - PERFORMANCE REQUIREMENTS | |
| Ballasts for Tubular Fluorescent Lamps General and Safety Requirements; (Amendment 1-1993) (Amendment 2-1995) | |
| Beta, X and Gamma Radiation Dose Equivalent and Dose Equivalent Rate Meters for Use in Radiation Protection First Edition | |
| Binary Direct Voltage Signals for Process Measurement and Control Systems | |
| Bonding and Grounding Assemblies | |
| Building construction machinery and equipment \x97 Self-loading mobile concrete mixers \x97 Safety requirements and verification AMENDMENT 1: Vertical test object height for the visibility measurements | |
| BUS-MICROPROCESSOR SYSTEM BUS FOR 1 BYTE TO 4 BYTE DATA | |
| Cable Connections for Gas-Insulated Metal-Enclosed Switchgear for Rated Voltages of 72.5 kV and Above | |
| Calculation of the Cyclic and Emergency Current Rating of Cables Part 3: Cyclic Rating Factor for Cables of all Voltages, with Partial Drying of the Soil | |
| Calculation of the cyclic and emergency current rating of cables. Part 1: Cyclic rating factor for cables up to and including 18/30(36)kV | |
| Calculation of the cyclic and emergency current rating of cables. Part 2: Cyclic rating of cables greater than 18/30 (36) kV and emergency ratings for cables of all voltages | |
| Capacitors and Resistors for Electronic Equipment Preferred Dimensions of Spindle Ends, Bushes and for the Mounting of Single-Hole, Bush-Mounted, Spindle-Operated Electronic Components | |
| Capacitors and resistors for use in electronic equipment \x96 Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components CORRIGENDUM 2 | |
| Characteristics and Calibration of Hydrophones for Operation in the Frequency Range 0.5 MHz to 15 MHz | |
| Characteristics of Local Area Networks (LAN) | |
| Circuit-breakers for equipment (CBE) IEC | |
| CIRCUIT-BREAKERS FOR EQUIPMENT (CBE) | |
| Circuit-Breakers for Overcurrent Protection for Household and Similar Installations - Part 2: Circuit-Breakers for A.C. and D.C. Operation | |
| Complete Filter Units for Radio Interference Suppression Part 1: Generic Specification | |
| Complete filter units for radio interference suppression Part 2-1: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (assessment level D/DZ) | |
| Complete filter units for radio interference suppression Part 2-2: Blank detail specification Passive filter units for electromagnetic interference suppression Filters for which safety tests are required (safety tests only) | |
| Conductive Clothing for Live Working at a Nominal Voltage up to 800 kV A.C. | |
| Conference Systems - Electrical and Audio Requirements | |
| Connectors for Optical Fibres and Cables - Part 10-1: Detail Specification for Fibre Optic Connector Type BFOC/2,5 Terminated to Multimode Fibre Type A1 | |
| Connectors for Optical Fibres and Cables - Part 10-2: Detail Specification for Fibre Optic Connector Type BFOC/2,5 Terminated to Single-Mode Fibre Type B1 | |
| Connectors for Optical Fibres and Cables - Part 10-3: Detail Specification for Fibre Optic Adaptor Type BFOC/2,5 for Single and Multimode Fibre | |
| Connectors for Optical Fibres and Cables - Part 14-10: Fibre Optic Pigtail or Patch Cord Connector Type SC-APC Untuned 8 Degrees Terminated on Single Mode Fibre Type B1 - Detail... | |
| Connectors for Optical Fibres and Cables - Part 14-1: Detail Specification for Fibre Optic Connector Type SC-PC Standard Terminated to Multimode Fibre Type A1a, A1b | |
| Connectors for Optical Fibres and Cables - Part 14-2: Detail Specification for Fibre Optic Connector Type SC-PC Standard Terminated to Single-Mode Fibre Type B1 | |
| Connectors for Optical Fibres and Cables - Part 14-3: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Single-Mode Fibre | |
| Connectors for Optical Fibres and Cables - Part 14-4: Detail Specification for Fibre Optic Adaptor (Simplex) Type SC for Multimode Fibre | |
| Connectors for Optical Fibres and Cables - Part 14-5: Detail Specification for Fibre Optic Connector Type SC-PC Untuned Terminated to Single-Mode Fibre Type B1 | |
| Connectors for Optical Fibres and Cables - Part 14-6: Detail Specification for Fibre Optic Connector Type SC-APC 9 Degrees Untuned Terminated to Single-Mode Fibre Type B1 | |
| Connectors for Optical Fibres and Cables - Part 14-7: Detail Specification for Fibre Optic Connector Type SC-APC 9 Degrees Tuned Terminated to Single-Mode Fibre Type B1 | |
| Connectors for Optical Fibres and Cables - Part 14-9: Fibre Optic Connector Type SC-APC Tuned 8 Degrees Terminated on Single Mode Fibre Type B1 - Detail Specification | |
| Connectors for optical fibres and cables - Part 16: Sectional specification for fibre optic connector - Type MT | |
| Connectors for optical fibres and cables - Part 17: Sectional specification for fibre optic connector - Type F-05 (friction lock) | |
| Connectors for Optical Fibres and Cables - Part 19-1: Fibre Optic Patch Cord Connector Type SC-PC (Floating Duplex) Standard Terminated on Multimode Fibre Type A1a, A1b - Detail Specification | |
| Connectors for Optical Fibres and Cables - Part 19-2: Fibre Optic Adaptor (Duplex) Type SC for Single-Mode Fibre Connectors - Detail Specification | |
| Connectors for Optical Fibres and Cables - Part 19-3: Fibre Optic Adaptor (Duplex) Type SC for Multimode Fibre Connectors - Detail Specification | |
| Connectors for optical fibres and cables - Part 19: Sectional specification for fibre optic connector - Type SC-D(uplex) | |
| CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 2: SECTIONAL SPECIFICATION FOR FIBRE OPTIC CONNECTOR - TYPE F-SMA | |
| Connectors for optical fibres and cables \x96 Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b \x96 Detail specification CORRIGENDUM... | |
| Connectors for Optical Fibres and Cables Part 0: Guide for the Construction of Sectional Specifications | |
| Connectors for Optical Fibres and Cables Part 13: Sectional Specification for Fibre Optic Connector - Type CF 08; (IECQ QC 911700) | |
| Connectors for Optical Fibres and Cables Part 6: Sectional Specification for Fibre Optic Connector - Type LSA; (IECQ QC 910200) (Corrigendum-1996) | |
| Construction project governance \x97 Guidance on delivery management | |
| Containment Monitoring Instrumentation for Early Detection of Developing Deviations from Normal Operation in Light Water Reactors | |
| CORRIGENDUM 1 AC and/or DC-supplied electronic control gear for tubular fluorescent lamps \x96 Performance requirements | |
| Cryostat End-Cap Dimensions for Germanium Semiconductor Detectors for Gamma-Ray Spectrometers | |
| DC Supplied Electronic Ballasts for Tubular Fluorescent Lamps - Performance Requirements | |
| Design Guidance for Avionics Test Equipment Part 1 System Description | |
| Determination of the Image Distortion of Electro-Optical X-Ray Image Intensifiers | |
| Determination of Water in Insulating Liquids by Automatic Coulometric Karl Fischer Titration First Edition | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 605: Physical tests \x96 Measurement of carbon black and/or mineral filler in polyethylene compounds | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 606: Physical tests \x96 Methods for determining the density | |
| Electric and optical fibre cables \x96 Test methods for non-metallic materials \x96 Part 607: Physical tests \x96 Test for the assessment of carbon black dispersion in polyethylene and polypropylene | |
| Electric Traction Overhead Lines | |
| ELECTRICAL ACCESSORIES - CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS - PART 1: CIRCUIT-BREAKERS FOR A.C. OPERATION | |
| Electrical Accessories - Circuit-Breakers for Overcurrent Protection for Household and Similar Installations | |
| ELECTRICAL ACCESSORIES \x96 CIRCUIT-BREAKERS FOR OVERCURRENT PROTECTION FOR HOUSEHOLD AND SIMILAR INSTALLATIONS \x96 Part 1: Circuit-breakers for a.c. operation CORRIGENDUM 1 | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 1: Circuit-breakers for a.c. operation | |
| Electrical accessories \x96 Circuit-breakers for overcurrent protection for household and similar installations \x96 Part 3: Circuit-breakers for DC operation | |
| Electrical and pneumatic analogue chart recorders for use in industrial process control systems Part 2: Guidance for inspection and routine testing | |
| Electrical and pneumatic analogue chart recorders for use in industrialprocess control systems Part 1: Methods for performance evaluation | |
| Electrical Safety of Laser Equipment and Installations | |
| Electrical test methods for electric cables \x96 Part 3: Test methods for partial discharge measurements on lengths of extruded power cables | |
| Electrical test methods for electric cables Part 1: Electrical tests for cables, cords and wires for voltages up to and including 450/750 V | |
| Electrical test methods for electric cables Part 2: Partial discharge tests | |
| Electrical Test Methods for Electric Cables Part 3: Test Methods for Partial Discharge Measurements on Lengths of Extruded Power Cable First Edition | |
| Electroacoustics \x96 Sound calibrators | |
| Equipment for Continuously Monitoring for Beta and Gamma Emitting Radionuclides in Liquid Effluents | |
| Fibre Optic Attenuators - Part 1-1: Blank Detail Specification | |
| Fibre Optic Branching Devices Part 1-1: Blank Detail Specification | |
| Fibre Optic Branching Devices Part 1: Generic Specification | |
| Fibre Optic Branching Devices Part 2: Sectional Specification - Non-Wavelength Selective Branching Devices | |
| Fibre Optic Branching Devices Part 3: Sectional Specification - Wavelength Selective Branching Devices | |
| FIBRE OPTIC INTERCONECTING DEVICES AND PASSIVE COMPONENTS - FIBRE OPTIC PASSIVE POWER CONTROL DEVICES - PART 1: GENERIC SPECIFICATION | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1-1: BLANK DETAIL SPECIFICATION | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - CONNECTORS FOR OPTICAL FIBRES AND CABLES - PART 1: GENERIC SPECIFICATION | |
| Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification | |
| Fibre optic interconnecting devices and passive components \x96 Non-wavelength-selec tive fibre optic branching devices \x96 Part 1: Generic specification | |
| Fibre Optic Switches - Part 1: Generic Specification; (IECQ QC 820000) | |
| Fixed capacitors for use in electronic equipment \x96 Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components | |
| Fixed Inductors for Electromagnetic Interference Suppression - Part 2-1: Blank Detail Specification - Inductors for Which Safety Tests are Required - Assessment Level D | |
| Fixed Inductors for Electromagnetic Interference Suppression - Part 2-2: Blank Detail Specification - Inductors for Which Safety Tests are Required (Only) | |
| Fixed inductors for electromagnetic interference suppression \x96 Part 1: Generic specification | |
| Fixed Inductors for Radio Interference Suppression Part 1: Generic Specification | |
| Fixed Inductors for Radio Interference Suppression Part 2: Sectional Specification Selection of Methods of Test and General Requirements First Edition | |
| Flickermeter - Functional and Design Specifications | |
| Flickermeter Part 0: Evaluation of Flicker Severity | |
| Glass Bulb Designation System for Lamps | |
| Graphical Symbols for Electrical Equipment in Medical Practice | |
| Guidance Information on the Application of Capacitors, Resistors, Inductors, and Complete Filter Units for Radio Interference Suppression | |
| Guide for Application and Operation of Turbine-Type Synchronous Machines Using Hydrogen as a Coolant | |
| Guide for the Maintenance of Silicone Transformer Liquids | |
| Guide for the Specification of Permissible Temperature and Temperature Rise for Parts of Electrical Equipment, in Particular for Terminals First Edition | |
| Guide to Voltage Fluctuation Limits for Household Appliances (Relating to IEC Publication 555-3) | |
| Hard-Drawn Aluminium Wire for Overhead Line Conductors | |
| Helica1-scan video tape cassette system using 8 mm magnetic tape - 8 mm video - Part 1: General specifications | |
| Helical-Scan Video Tape Cassette System Using 8 mm Magnetic Tape (8 mm Video) - Part 4: Video Subcode (VSC) | |
| Helical-scan video tape cassette system using 8 mm magnetic tape - 8 mm Video - Part 2: PCM multi-track audio system | |
| Helical-scan video tape cassette system using 8 mm magnetic tape - 8 mm Video - Part 3: High-band specifications for Hi 8 | |
| IEC 822 VSB Parallel Sub-System Bus of the IEC 821 VMEbus | |
| IEC system of plugs and socket-outlets for household and similar purposes - Part 1: Plugs and socket-outlets 16 A 250 V a.c. | |
| IEC System of plugs and socket-outlets for household and similar purposes - Part 3: SELV plugs and socket-outlets, 16 A 6V, 12 V, 24 V, 48 V, a.c. and d.c. | |
| IEC System of Plugs and Socket-Outlets for Household and Similar Purposes Part 2: Plugs and Socket-Outlets 15 A 125 V a.c. | |
| Ignitable Liquid Drainage Floor Assemblies | |
| Industrial-Process Measurement and Control Terms and Definitions | |
| Insulating Foam-Filled Tubes and Solid Rods for Live Working | |
| Insulating Liquids - Specifications for Unused Liquids Based on Synthetic Aromatic Hydrocarbons | |
| INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 2: METHODS OF TEST | |
| INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-1: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - TYPES OF INDUSTRIAL RIGID LAMINATED SHEETS | |
| INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-2: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON EPOXY... | |
| INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-4: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON PHENOLIC... | |
| INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-5: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON POLYESTER... | |
| INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-6: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON SILICONE... | |
| INSULATING MATERIALS - INDUSTRIAL RIGID LAMINATED SHEETS BASED ON THERMOSETTING RESINS FOR ELECTRICAL PURPOSES - PART 3-7: SPECIFICATIONS FOR INDIVIDUAL MATERIALS - REQUIREMENTS FOR RIGID LAMINATED SHEETS BASED ON POLYIMIDE... | |
| Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes \x96 Part 2: Methods of test | |
| Insulating materials \x96 Industrial rigid laminated sheets based on thermosetting resins for electrical purposes Part 3-4: Specifications for individual materials \x96 Requirements for rigid laminated sheets based on phenolic resins... | |
| INSULATING POLES (INSULATING STICKS) AND UNIVERSAL TOOL ATTACHMENTS (FITTINGS) FOR LIVE WORKING | |
| Lait sec - D\xe9termination de l'acidit\xe9 titrable (M\xe9thode de r\xe9f\xe9rence) | |
| Lait sec - D\xe9termination de l'acidit\xe9 titrable (M\xe9thode pratique) | |
| Live Working - Gloves of Insulating Material CORRIGENDUM 1 | |
| Live Working - Gloves of Insulating Material | |
| Live working \x96 Conductive clothing for use at nominal voltage up to 800 kV a.c. and \xb1600 kV d.c. CORRIGENDUM 1 | |
| LIVE WORKING \x96 HAND TOOLS FOR USE UP TO 1 000 V AC AND 1 500 V DC | |
| Live working \x96 Insulating foam-filled tubes and solid rods \x96 Part 1: Tubes and rods of a circular cross-section | |
| Live working \x96 Insulating sticks and attachable devices \x96 Part 1: Insulating sticks | |
| Live working \x96 Insulating sticks and attachable devices \x96 Part 2: Attachable devices | |
| Live working Hand tools for use up to 1 000 V a.c. and 1 500 V d.c. | |
| Loading and Strength of Overhead Transmission Lines | |
| Loading Guide for Dry-Type Power Transformers | |
| Local Area Networks CSMA/CD 10 Mbit/s Baseband Planning and Installation Guide | |
| Low-Voltage Switchgear and Controlgear - Part 1: General Rules | |
| LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 3: SWITCHES, DISCONNECTORS, SWITCH-DISCONNECTORS AND FUSE-COMBINATION UNITS | |
| Low-voltage switchgear and controlgear \x96 Part 2: Circuit-breakers | |
| Low-voltage switchgear and controlgear \x96 Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear \x96 Part 3: Switches, disconnectors, switchdisconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear \x96 Part 4-1: Contactors and motor-starters \x96 Electromechanical contactors and motor-starters Amendment 2 | |
| Low-voltage switchgear and controlgear \x96 Part 4-1: Contactors and motor-starters \x96 Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and controlgear Part 2: Circuit-breakers | |
| Marine automatic radar plotting aids (ARPA) Operational requirements - Methods of testing and test results | |
| Marine Navigation and radiocommunication Equipment and Systems - Radar Plotting Aids - Part 2: Automatic Tracking AIDS (ATA) - Methods of Testing and Required Test Results | |
| MARINE NAVIGATIONAL EQUIPMENT - General requirements - Methods of testing and required test results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - General Requirements - Methods of Testing and Required Test Results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Radar - Part 1: Shipborne Radar - Performance Requirements - Methods of Testing and Required Test Results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Radar - Part 2: Shipborne Radar for High-Speed Craft (HSC) - Methods of Testing and Required Test Results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Radar - Part 3: Radar with Chart Facilities - Performance Requirements - Methods of Testing and Required Test Results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Radar Plotting Aids - Part 1: Automatic Radar Plotting Aids (ARPA) - Methods of Testing and Required Test Results | |
| Maritime Navigation and Radiocommunication Equipment and Systems - Radar Plotting Aids - Part 3: Electronic Plotting Aid (EPA) - Performance Requirements - Methods of Testing and Required Test Results | |
| Measurement of Power-Frequency Electric Fields | |
| Measurements for Monitoring Adequate Cooling within the Core of Pressurized Light Water Reactors | |
| Measuring Method for Chrominance Signal-to-Random Noise Ratio for Video Tape Recorders | |
| Mechanical Endurance Functional Tests for Electrical Insulation Systems | |
| Methods for the Determination of the Lightning Impulse Breakdown Voltage of Insulating Liquids | |
| Methods of Evaluating the Performance of Electrical and Pneumatic Analogue Chart Recorders for Use in Industrial-Process Control Systems | |
| Methods of measurement for digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 11: Cross-polarization interference canceller | |
| METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS - PART 1: MEASUREMENTS COMMON TO TERRESTRIAL RADIO-RELAY SYSTEMS AND SATELLITE EARTH STATIONS - SECTION 2: BASIC CHARACTERISTICS... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 3: Transmission characteristics... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section 4: Transmission performance... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 3: RF branching networks | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 4: Transmitter/receiver including modulator/demodulato r | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 5: Digital signal processing sub-system | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 6: Protection switching | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 7: Diversity switching and combining equipment | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 9: Service channels | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section ten: Overall system performance | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 13: VSAT systems | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurement on satellite earth stations - Section 5: Up- and down-converters | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 10: Terminal equipment - TDMA traffic earth station... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 11: Service channel equipment for SCPC-PSK transmission | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 12: Overall system performance | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 14: Earth stations for satellite news gathering (SNG)... | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 2: Antenna | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 4: Low noise amplifier | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 6: High power amplifiers | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 7: Figure-of-merit of receiving system | |
| Methods of measurement for equipment used in digital microwave radio transmission systems - Part 3: Measurements on satellite earth stations - Section 9: Terminal equipment SCPC-PSK | |
| Methods of measurement for equipment used in digital microwave radio transmission systems. Part 1: Measurements common to terrestrial radio-relay systems and satellite earth stations - Section One: General | |
| Methods of measurement for equipment used in digital microwave radio transmission systems. Part 2: Measurements on terrestrial radio-relay systems - Section One: General | |
| Methods of measurement for equipment used in digital microwave radio transmission systems. Part 3: Measurements on satellite earth stations - Section One: General | |
| METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSIONS SYSTEMS - PART 2: MEASUREMENTS ON TERRESTRIAL RADIO-RELAY SYSTEMS - SECTION 8: ADAPTIVE EQUALIZER | |
| Methods of measurement for equipment used in digital microwave transmission systems - Part 2: Measurements on terrestrial radio-relay systems - Section 2: Antenna | |
| Methods of Test for the Determination of the Ignitability of Solid Electrical Insulating Materials When Exposed to Electrically Heated Wire Sources | |
| Microprocessor System Bus (VMSbus) - Serial Sub-System Bus of the IEC 821 Bus (VMEbus) | |
| MISCELLANEOUS LAMPHOLDERS - PART 1: GENERAL REQUIREMENTS AND TESTS | |
| Miscellaneous Lampholders - Part 2: Particular Requirements - Section 1: Lampholders S14 | |
| Miscellaneous lampholders \x96 Part 2-1: Particular requirements - Lampholders S14 | |
| Miscellaneous lampholders \x96 Part 2-2: Particular requirements \x96 Connectors for LED-modules | |
| Miscellaneous lampholders \x96 Part 2-3: Particular requirements \x96 Lampholders for double-capped linear LED lamps | |
| Modular order for the development of mechanical structures for electrical and electronic equipment practices \x96 Part 1: Generic standard | |
| Modular Order for the Development of Mechanical Structures for Electronic Equipment Practices - Part 1: Generic Standard | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 1:... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2:... | |
| Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice | |
| Modular order for the development of mechanical structures for electronic equipment practices \x96 Part 2-3: Sectional specification \x96 Interface co-ordination dimensions for the 25 mm equipment practice \x96 Extended detail... | |
| Modular order for the development of mechanical structures for electronic equipment practices \x96 Part 2-4: Sectional specification \x96 Interface co-ordination dimensions for the 25 mm equipment practice \x96 Adaptation dimensions... | |
| Modular order for the development of mechanical structures for electronic equipment practices \x96 Part 2-5: Sectional specification \x96 Interface co-ordination dimensions for the 25 mm equipment practice \x96 Cabinet interface... | |
| NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS | |
| Non-Cellulosic Papers for Electrical Purposes - Part 2: Methods of Test | |
| Non-Cellulosic Papers for Electrical Purposes - Part 3: Specification for Individual Materials - Sheet 1: Filled Glass Paper | |
| Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 2: Hybrid Inorganic-Organic Paper | |
| Non-Cellulosic Papers for Electrical Purposes - Part 3: Specifications for Individual Materials - Sheet 4: Aramid Fibre Paper Containing Not More Than 50 % of Mica Particles | |
| NON-CELLULOSIC PAPERS FOR ELECTRICAL PURPOSES \x96 Part 3: Specifications for individual materials \x96 Sheet 3: Unfilled aramid (aromatic polyamide) papers CORRIGENDUM 1 | |
| Nuclear Instrumentation - ECL (Emitter Coulpled Logic) Front Panel Interconnections in Counter Logic | |
| Nuclear Instrumentation - Modular High Speed Data Acquisition System - FASTBUS | |
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 2: Transformers and inductors using YEx-2 laminations for printed wiring board mounting | |
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 3: Transformers and inductors using YUI-1 laminations | |
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 4: Transformers and inductors using YUI-2 laminations | |
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment - Part 5: Transformers and inductors using the series Q of C-cores | |
| Outline dimensions of transformers and inductors for use in telecommunication and electronic equipment. Part 1: Transformers and inductors using YEI-1 laminations | |
| Overhead transmission lines - Design criteria | |
| PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - PART 2: SECTIONAL SPECIFICATION - PASSIVE FILTER UNITS FOR WHICH SAFETY TESTS ARE APPROPRIATE - TEST METHODS AND GENERAL REQUIREMENTS | |
| Passive filter units for electromagnetic interference suppression \x96 Part 1: Generic specification CORRIGENDUM 1 | |
| Passive filter units for electromagnetic interference suppression \x96 Part 2: Sectional specification \x96 Passive filter units for which safety tests are appropriate \x96 Test methods and general requirements CORRIGENDUM 1... | |
| PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION \x96 Part 3: Passive filter units for which safety tests are appropriate | |
| Performance and Construction of Electric Circulating Fans and Regulators | |
| Performance and testing of teleprotection equipment of power systems - Part 2: Analogue comparison systems | |
| Performance and Testing of Teleprotection Equipment of Power Systems Part 1: Narrow-Band Command Systems | |
| Petroleum products and fat and oil derivatives - Determination of phosphorus content in fatty acid methyl esters (FAME) - Optical emission spectral analysis with inductively coupled plasma (ICP OES) | |
| Photovoltaic devices - Part 1-1: Measurement of current-voltage characteristics of multi-junction photovoltaic (PV) devices | |
| Photovoltaic Devices - Part 10: Methods of Linearity Measurement | |
| PHOTOVOLTAIC DEVICES - PART 2: REQUIREMENTS FOR PHOTOVOLTAIC REFERENCE DEVICES | |
| Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data | |
| Photovoltaic devices - Part 5: Determination of the equivalent cell temperature (ECT) of photovoltaic (PV) devices by the open-circuit voltage method | |
| Photovoltaic Devices - Part 7: Computation of Spectral Mismatch Error Introduced in the Testing of a Photovoltaic Device | |
| Photovoltaic devices - Part 8-1: Measurement of spectral responsivity of multi-junction photovoltaic (PV) devices | |
| Photovoltaic Devices - Part 8: Guidance for the Measurement of Spectral Response of a Photovoltaic (PV) Device | |
| Photovoltaic Devices - Part 9: Solar Simulator Performance Requirements | |
| PHOTOVOLTAIC DEVICES - PROCEDURES FOR TEMPERATURE AND IRRADIANCE CORRECTIONS TO MEASURED I-V CHARACTERISTICS | |
| Photovoltaic devices \x96 Part 2: Requirements for photovoltaic reference devices (Commented Version) | |
| Photovoltaic devices \x96 Part 2: Requirements for photovoltaic reference devices | |
| Photovoltaic devices \x96 Part 4: Photovoltaic reference devices \x96 Procedures for establishing calibration traceability | |
| Photovoltaic devices \x96 Part 4: Reference solar devices \x96 Procedures for establishing calibration traceability | |
| Photovoltaic devices \x96 Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices | |
| Photovoltaic devices \x96 Procedures for temperature and irradiance corrections to measured I-V characteristics | |
| Photovoltaic Devices Part 1: Measurement of Photovoltaic Current-Voltage Characteristics | |
| Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data | |
| PHOTOVOLTAIC DEVICES SERIES | |
| Plastic Plugs for Steel Drums | |
| Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs (Extended Version + Redline Version) | |
| Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular Requirements for socket-outlets for appliances (Extended Version + Redline Version) | |
| Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular Requirements for switched socket-outlets without interlock for fixed installations (Extended Version + Redline Version) | |
| Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations (Extended Version + Redline Version) | |
| Plugs and Socket-Outlets for Household and Similar Purposes - Part 2-6: Particular Requirements for Switched Socket-Outlets with Interlock for Fixed Installations | |
| Plugs and socket-outlets for household and similar purposes - Part 2-7: Particular requirements for cord extension sets (Extended Version + Redline Version) | |
| Plugs and socket-outlets for household and similar purposes - Part 2: Particular requirements for adaptors | |
| Plugs and Socket-Outlets for Household and Similar Purposes - Part 2: Particular Requirements for Plugs and Socket-Outlets for SELV | |
| PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES \x96 Part 1: General requirements | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-1: Particular requirements for fused plugs (Extended Version) | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-1: Particular requirements for fused plugs | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-2: Particular requirements for socket-outlets for appliances (Extended Version) | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-2: Particular requirements for socket-outlets for appliances | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations (Extended Version) | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations (Extended Version) | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-7: Particular requirements for cord extension sets (Extended Version) | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-7: Particular requirements for cord extension sets CORRIGENDUM 1 | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-7: Particular requirements for cord extension sets | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 2-8: Particular requirements for socket-outlets for furniture | |
| Plugs and socket-outlets for household and similar purposes \x96 Part 3-1: Particular requirements for socket-outlets incorporating USB power supply | |
| Plugs and socket-outlets for household and similar purposes Part 1: General requirements | |
| Plugs and socket-outlets for household and similar purposes Part 2-1: Particular requirements for fused plugs | |
| Plugs and socket-outlets for household and similar purposes Part 2-2: Particular requirements for socket-outlets for appliances | |
| Plugs and socket-outlets for household and similar purposes Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations | |
| PLUGS AND SOCKET-OUTLETS FOR HOUSEHOLD AND SIMILAR PURPOSES Part 3-1: Particular requirements for socket-outlets incorporating USB power supply | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 30 KV (UM = 36 KV) UP TO 150 KV (UM = 170 KV) - TEST METHODS AND... | |
| POWER CABLES WITH EXTRUDED INSULATION AND THEIR ACCESSORIES FOR RATED VOLTAGES ABOVE 30 kV (Um = 36 kV) UP TO 150 kV (Um = 170 kV) \x96 TEST METHODS AND... | |
| Pre-Recorded Capacitance Grooveless Videodisc System 50 Hz/625 Lines - PAL, on Type VHD | |
| Pre-Recorded Capacitance Grooveless Videodisc System 60 Hz/525 Lines - NTSC, on Type VHD | |
| Pre-Recorded Optical Reflective Videodisk System "Laser Vision" 50 Hz/625 Lines - PAL | |
| PRE-RECORDED OPTICAL REFLECTIVE VIDEODISK SYSTEM "LAZER VISION" 60 HZ/525 LINES -M/NTSC | |
| Preparation of Function Charts for Control Systems | |
| Presentation of Reliability, Maintainability and Availability Predictions | |
| PVC INSULATED RIBBON CABLE WITH A PITCH OF 1,27 MM SUITABLE FOR INSULATION DISPLACEMENT TERMINATION | |
| Radiation protection instrumentation \x96 Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation \x96 Part 1: Portable workplace and environmental meters and monitors | |
| Radiation protection instrumentation \x96 Ambient and/or directional dose equivalent (rate) meters and/or monitors for beta, X and gamma radiation \x96 Part 2: High range beta and photon dose and dose... | |
| Radiation safety of laser products, equipment classification, requirements and user's guide | |
| Railway applications \x96 Fixed installations \x96 Electric traction overhead contact lines systems (Commented Version) | |
| Refrigeration and Air Conditioning Technology | |
| Safety of laser products - Part 1 : Equipment classification, requirements and user's guide | |
| Safety of laser products - Part 1: Equipment classification, requirements and user's guide | |
| SAFETY OF LASER PRODUCTS - PART 2: SAFETY OF OPTICAL FIBRE COMMUNICATION SYSTEMS (OFCSS) | |
| Safety of Laser Products - Part 4: Laser Guards | |
| Safety of laser products \x96 Part 12: Safety of free space optical communication systems used for transmission of information | |
| SAFETY OF LASER PRODUCTS \x96 Part 1: Equipment classification and requirements | |
| SAFETY OF LASER PRODUCTS \x96 Part 2: Safety of optical fibre communication systems (OFCS) | |
| SAFETY OF LASER PRODUCTS \x96 Part 2: Safety of optical fibre communication systems (OFCSs) | |
| Safety of laser products \x96 Part 4: Laser guards | |
| Safety of laser products Part 12: Safety of free space optical communication systems used for transmission of information | |
| Shipborne Radar Operational and Performance Requirements Methods of Tests and Required Test Results | |
| Short-Circuit Current Calculation in Three-Phase A.C. Systems - Part 3: Currents During Two Separate Simultaneous Single Phase Line-to-Earth Short Circuits and Partial Short-Circuit Currents Flowing Through Earth | |
| Short-Circuit Current Calculation in Three-Phase A.C. Systems Part 1: Factors for the Calculation of Short-Circuit Currents in Three-Phase A.C. Systems According to IEC 909 | |
| Short-Circuit Current Calculation in Three-Phase A.C. Systems | |
| SHORT-CIRCUIT CURRENTS - CALCULATION OF EFFECTS - PART 1: DEFINITIONS AND CALCULATION METHODS | |
| Short-circuit currents in three-phase a.c. systems \x96 Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial shortcircuit currents flowing through earth | |
| Short-circuit currents in three-phase AC systems \x96 Part 3: Currents during two separate simultaneous line-to-earth short circuits and partial short-circuit currents flowing through earth | |
| Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 1 000 V - Part 4: Internal Fuses | |
| Shunt Capacitors for A.C. Power Systems Having a Rated Voltage Above 660 V Part 1: General Performance, Testing and Rating - Safety Requirements - Guide for Installation and Operation | |
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1 000 V Part 3: Internal fuses | |
| SHUNT POWER CAPACITORS OF THE NON-SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING -... | |
| Shunt power capacitors of the non-self-healing type for a.c. systems having a rated voltage up to and including 1000 V - Part 2: Ageing test and destruction test | |
| SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 000 V - PART 1: GENERAL - PERFORMANCE, TESTING AND RATING... | |
| SHUNT POWER CAPACITORS OF THE SELF-HEALING TYPE FOR A.C. SYSTEMS HAVING A RATED VOLTAGE UP TO AND INCLUDING 1 000 V - PART 2: AGEING TEST, SELF-HEALING TEST AND DESTRUCTION... | |
| Shunt power capacitors of the self-healing type for a.c. systems having a rated voltage up to and including 1 000 V \x96 Part 1: General \x96 Performance, testing and rating... | |
| Single-Capped Fluorescent Lamps - Performance Specifications | |
| Software for Computers Important to Safety for Nuclear Power Plants - Part 2: Software Aspects of Defence Against Common Cause Failures, Use of Software Tools and of Pre-Developed Software | |
| Software for Computers in the Safety Systems of Nuclear Power Stations | |
| Sound Calibrators | |
| Sound Systems for Emergency Purposes | |
| Specification for Gloves and Mitts of Insulating Material for Live Working | |
| Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 1: Definitions, Designations and General Requirements | |
| Specification for Industrial Rigid Laminated Sheets Based on Thermosetting Resins for Electrical Purposes Part 3: Specifications for Individual Materials - Sheet 3: Requirements for Rigid Laminated Sheets Based on Melamine... | |
| Specification for non-cellulosic papers for electrical purposes - Part 3: Specifications for individual materials - Sheet 3: Unfilled aramid (aromatic polyamide) papers | |
| SPECIFICATIONS FOR UNUSED SILICONE INSULATING LIQUIDS FOR ELECTROTECHNICAL PURPOSES | |
| Spring-Operated Impact-Test Apparatus and Its Calibration | |
| STANDARDIZATION OF INTERCONNECTIONS BETWEEN BROADCASTING TRANSMITTERS OR TRANSMITTER SYSTEMS AND SUPERVISORY EQUIPMENT - PART 1: INTERFACE STANDARDS FOR SYSTEMS USING DEDICATED INTERCONNECTIONS | |
| Standardization of Interconnections between Broadcasting Transmitters or Transmitter Systems and Supervisory Equipment - Part 2: Interface Standards for Systems using Data Bus Type Interconnections | |
| Starting devices (other than glow starters) General and Safety requirements | |
| Stationary Lead-Acid Batteries - General Requirements and Methods of Test - Part 2: Valve Regulated Types | |
| Stationary Lead-Acid Batteries General Requirements and Methods of Test Part 1: Vented Types | |
| Stationary lead-acid batteries Part 11: Vented types General requirements and methods of tests | |
| Stationary lead-acid batteries Part 21: Valve regulated types Methods of test | |
| Stationary lead-acid batteries Part 22: Valve regulated types Requirements | |
| Storage Containers for IBCs | |
| Supply Voltages of Traction Systems | |
| Surface Acoustic Wave (SAW) Filters Part 1: General Information, Standard Values and Test Conditions Chapter I: General Information and Standard Values Chapter II: Test Conditions First Edition | |
| Surface Acoustic Wave (SAW) Filters Part 2: Guide to the Use of Surface Acoustic Wave Filters (Chapter III) First Edition | |
| Surface Acoustic Wave (SAW) Filters Part 3: Standard Outlines (Chapter IV) | |
| Telecontrol equipment and systems - Part 2: Operating conditions - Section 1: Power supply and electromagnetic compatibility | |
| Telecontrol equipment and systems - Part 2: Operating conditions - Section 2: Environmental conditions (climatic, mechanical and other non electrical influences) | |
| Telecontrol Equipment and Systems - Part 5-101: Transmission Protocols - Companion Standard for Basic Telecontrol Tasks | |
| Telecontrol Equipment and Systems - Part 5-103: Transmission Protocols - Companion Standard for the Informative Interface of Protection Equipment | |
| Telecontrol Equipment and Systems - Part 5-104: Transmission Protocols - Network Access for IEC 60870-5-101 Using Standard Transport Profiles | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 102: Companion standard for the transmission of integrated totals in electric power systems | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 2: Link transmission procedures | |
| Telecontrol equipment and systems - Part 5: Transmission protocols - Section 3: General structure of application data | |
| Telecontrol Equipment and Systems - Part 5: Transmission Protocols - Section 5: Basic Application Functions | |
| TELECONTROL EQUIPMENT AND SYSTEMS - PART 5: TRANSMISSION PROTOCOLS | |
| Telecontrol Equipment and Systems - Part 6-701: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Functional Profile for Providing the TASE.1 Application Service in End Systems | |
| Telecontrol Equipment and Systems - Part 6-702: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Functional Profile for Providing the TASE.2 Application Service in End Systems | |
| Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Section 2: Use of Basic Standards (OSI Layers 1- 4) | |
| Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Section 501: TASE.1 Service Definitions | |
| Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Section 502: TASE.1 Protocol Definitions | |
| Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Section 503: TASE.2 Services and Protocol | |
| Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Section 601: Functional Profile for Providing the Connection-Oriented Transport Service in an End... | |
| Telecontrol Equipment and Systems - Part 6: Telecontrol Protocols Compatible with ISO Standards and ITU-T Recommendations - Section 802: TASE.2 Object Models | |
| TELECONTROL EQUIPMENT AND SYSTEMS \x96 Part 5-104: Transmission protocols \x96 Network access for IEC 60870-5-101 using standard transport profiles | |
| Telecontrol equipment and systems \x96 Part 5-6: Guidelines for conformance testing for the IEC 60870-5 companion standards | |
| Telecontrol Equipment and Systems Part 5: Transmission Protocols Section 4: Definition and Coding of Application Information Elements | |
| Telecontrol equipment and systems. Part 1: General considerations. Section Two: Guide for specifications | |
| Telecontrol equipment and systems. Part 3: Interfaces (electrical characteristics) | |
| Telecontrol equipment and systems. Part 4: Performance requirements | |
| Telecontrol equipment and systems. Part 5: Transmission protocols - Section One: Transmission frame formats | |
| Terminology related to microprocessors | |
| Test Methods for Multichannel Analyzers as Multichannel Scalers | |
| Traitement de l\x92information - Repr\xe9sentation des valeurs num\xe9riques dans les cha\xeenes de caract\xe8res pour l\x92\xe9change d\x92information | |
| UL Standard for Fafety Low-Voltage Switchgear and Controlgear - Part 1: General Rules | |
| UL Standard for Safety for Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters | |
| UL Standard for Safety Low-Voltage Switchgear and Controlgear Part 4-1: Contactors and Motor-Starters Electromechanical Contactors and Motor-Starters | |
| UL Standard for Safety Passive Filter Units for Electromagnetic Interference Suppression \x96 Part 3: Passive Filter Units for Which Safety Tests are Appropriate | |
| Warning Equipment for Criticality Accidents | |
| WINDING WIRES - TEST METHODS - PART 1: GENERAL | |
| WINDING WIRES - TEST METHODS - PART 2: DETERMINATION OF DIMENSIONS | |
| WINDING WIRES - TEST METHODS - PART 3: MECHANICAL PROPERTIES | |
| WINDING WIRES - TEST METHODS - PART 4: CHEMICAL PROPERTIES | |
| WINDING WIRES - TEST METHODS - PART 5: ELECTRICAL PROPERTIES | |
| WINDING WIRES - TEST METHODS - PART 6: THERMAL PROPERTIES | |
| Winding wires \x96 Test methods \x96 Part 3: Mechanical properties | |
| Zinc-Coated Steel Wires for Stranded Conductors |
| << Prev | Next >> |