Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
50
60
63
64
65
66
67
68
69
70
71
72
73
74
75
80
90
100
110
120
130
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| Agents de surface et d\xe9tergents - M\xe9thodes de division d'un \xe9chantillon | |
| AMENDEMENT 1 Automatic electrical controls \x96 Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Amendement 2 Common Specifications For High-Voltage Switchgear and Controlgear Standards | |
| AMENDMENT 1 - Hand-held motor-operated electric tools Safety Part 2-18: Particular requirements for strapping tools | |
| AMENDMENT 1 Automatic electrical controls \x96 Part 2-14: Particular requirements for electric actuators | |
| AMENDMENT 1 Automatic electrical controls \x96 Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements | |
| Amendment 1 Automatic electrical controls for household and similar use - Part 2-5: Particular requirements for automatic electrical burner control systems | |
| AMENDMENT 1 Automatic electrical controls for household and similar use \x96 Part 2-9: Particular requirements for temperature sensing controls | |
| AMENDMENT 1 Cable networks for television signals, sound signals and interactive services \x96 Part 7-1: Hybrid Fibre Coax Outside Plant status monitoring \x96 Physical (PHY) Layer Specification | |
| Amendment 1 Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 6: Ship Environment | |
| Amendment 1 Classification of environmental conditions \x96 Part 3: Classification of groups of environmental parameters and their severities Section 4: Stationary use at non-weatherprotected locations | |
| Amendment 1 Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Temperature and Humidity | |
| Amendment 1 Common specifications for high-voltage switchgear and controlgear standards | |
| Amendment 1 Dimensions of Low-Voltage Switchgear and Controlgear Standardized Mounting on Rails for Mechanical Support of Electrical Devices in Switchgear and Controlgear Installations | |
| AMENDMENT 1 Fire hazard testing \x96 Part 6-1: Smoke obscuration \x96 General guidance | |
| AMENDMENT 1 Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods | |
| Amendment 1 Fire Hazard Testing Part 2: Test Methods Section 2 - Needle-Flame Test | |
| AMENDMENT 1 Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 247: Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall | |
| AMENDMENT 1 Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 280: Heatshrinkable, polyolefin sleeving, anti-tracking | |
| AMENDMENT 1 Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 283: Heatshrinkable, polyolefin sleeving for bus-bar insulation | |
| AMENDMENT 1 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-13: Particular requirements for chain saws | |
| AMENDMENT 1 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-15: Particular requirements for hedge trimmers | |
| AMENDMENT 1 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-19: Particular requirements for jointers | |
| AMENDMENT 1 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-1: Particular requirements for drills and impact drills | |
| AMENDMENT 1 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-2: Particular requirements for screwdrivers and impact wrenches | |
| AMENDMENT 1 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-3: Particular requirements for grinders, polishers and disk-type sanders | |
| AMENDMENT 1 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-9: Particular requirements for tappers | |
| AMENDMENT 1 Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-5: Particular requirements for electric thermal storage room heaters | |
| AMENDMENT 1 Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-13: Particular requirements for range hoods | |
| AMENDMENT 1 Household microwave ovens \x96 Methods for measuring performance | |
| AMENDMENT 1 Live working \x96 Terminology for tools, equipment and devices | |
| AMENDMENT 1 Medical electrical equipment - Dosimeters with ionization chambers as used in radiotherapy | |
| AMENDMENT 1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V \x96 Part 1: Cables | |
| AMENDMENT 1 Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V \x96 Part 2: Terminations | |
| AMENDMENT 1 Semiconductor devices \x96 Discrete devices \x96 Part 4: Microwave diodes and transistors | |
| Amendment 1 Semiconductor devices \x96 Part 16-1: Microwave integrated circuits \x96 Amplifiers | |
| AMENDMENT 1 Semiconductor devices \x96 Part 16-3: Microwave integrated circuits \x96 Frequency converters | |
| AMENDMENT 1 Semiconductor devices \x96 Part 16-4: Microwave integrated circuits \x96 Switches | |
| AMENDMENT 1 Semiconductor devices \x96 Part 16-5: Microwave integrated circuits \x96 Oscillators | |
| AMENDMENT 1 Semiconductor devices \x96 Part 1: General | |
| AMENDMENT 1 Thermal-links - Requirements and application guide | |
| AMENDMENT 1 Thermistors \x96 Directly heated positive temperature coefficient \x96 Part 1: Generic specification | |
| AMENDMENT 1 Thyristor valves for high voltage direct current (HVDC) power transmission \x96 Part 1: Electrical testing | |
| AMENDMENT 1 Thyristor valves for high voltage direct current (HVDC) power transmission \x96 Part 2: Terminology | |
| AMENDMENT 2 Automatic electrical controls \x96 Part 2-9: Particular requirements for temperature sensing controls | |
| AMENDMENT 2 Automatic electrical controls for household and similar use \x96 Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements | |
| AMENDMENT 2 Automatic electrical controls for household and similar use \x96 Part 2-5: Particular requirements for automatic electrical burner control systems | |
| AMENDMENT 2 Automatic electrical controls for household and similar use \x96 Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Amendment 2 Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 6: Ship Environment | |
| AMENDMENT 2 Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 216: Heatshrinkable, flame-retarded, limited-fire-hazard sleeving | |
| AMENDMENT 2 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-14: Particular requirements for planers | |
| AMENDMENT 2 Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-3: Particular requirements for grinders, polishers and disk-type sanders | |
| AMENDMENT 2 Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-13: Particular requirements for range hoods | |
| AMENDMENT 2 Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers... | |
| AMENDMENT 2 Household microwave ovens \x96 Methods for measuring performance | |
| AMENDMENT 2 Semiconductor devices \x96 Part 16-3: Microwave integrated circuits \x96 Frequency converters | |
| AMENDMENT 2 Semiconductor devices \x96 Part 16-4: Microwave integrated circuits \x96 Switches | |
| AMENDMENT 2 Thermal-links - Requirements and application guide | |
| AMENDMENT 2 Thyristor valves for high voltage direct current (HVDC) power transmission \x96 Part 1: Electrical testing | |
| Automatic electrical controls - Part 2-13: Particular requirements for humidity sensing controls (Extended Version) | |
| Automatic electrical controls - Part 2-14: Particular requirements for electric actuators | |
| Automatic electrical controls - Part 2-6: Particular requirements for automatic electrical pressure sensing controls including mechanical requirements (EXTENDED VERSION) | |
| Automatic electrical controls - Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Automatic electrical controls \x96 Part 1: General requirements | |
| Automatic electrical controls \x96 Part 2-11: Particular requirements for energy regulators (Extended Version) | |
| Automatic electrical controls \x96 Part 2-13: Particular requirements for humidity sensing controls CORRIGENDUM 1 | |
| Automatic electrical controls \x96 Part 2-23: Particular requirements for electrical sensors and sensing elements (Extended Version) | |
| Automatic electrical controls \x96 Part 2-23: Particular requirements for electrical sensors and sensing elements | |
| Automatic electrical controls \x96 Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements (Extended Version) | |
| AUTOMATIC ELECTRICAL CONTROLS \x96 Part 2-8: Particular requirements for electrically operated water valves, including mechanical requirements | |
| Automatic electrical controls \x96 Part 2-9: Particular requirements for temperature sensing control | |
| Automatic Electrical Controls for Household and Similar Use - Part 1: General Requirements | |
| AUTOMATIC ELECTRICAL CONTROLS FOR HOUSEHOLD AND SIMILAR USE - PART 2-17: PARTICULAR REQUIREMENTS FOR ELECTRICALLY OPERATED GAS VALVES, INCLUDING MECHANICAL REQUIREMENTS | |
| Automatic Electrical Controls for Household and Similar Use - Part 2: Particular Requirements for Electrically Operated Oil Valves, Including Mechanical Requirements | |
| Automatic electrical controls for household and similar use \x96 Part 1: General requirements | |
| Automatic electrical controls for household and similar use \x96 Part 2-14: Particular requirements for electric actuators | |
| Automatic electrical controls for household and similar use \x96 Part 2-17: Particular requirements for electrically operated gas valves, including mechanical requirements | |
| Automatic Electrical Controls for Household and Similar Use Part 2: Particular Requirements for Electrical Controls for Electrical Household Appliances | |
| Automatic electrical controls Part 2-11: Particular requirements for energy regulators IEC | |
| AUTOMATIC ELECTRICAL CONTROLS Part 2-5: Particular requirements for automatic electrical burner control systems | |
| Automotive fuels - Determination of iodine value in fatty acid methyl esters (FAME) - Calculation method from gas chromatographic data | |
| Axial Lead Cores Made of Magnetic Oxides or Iron Powder | |
| CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 11: SAFETY | |
| CABLE NETWORKS FOR TELEVISION SIGNALS, SOUND SIGNALS AND INTERACTIVE SERVICES - PART 1: SYSTEM PERFORMANCE OF FORWARD PATHS | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 1-1: RF cabling for two way home networks | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 1-2: Performance requirements for signals delivered at the system outlet in operation | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 101-1: RF cabling for two-way home networks with all-digital channels load | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 101-2: Performance requirements for signals delivered at the system outlet in operation with all-digital channels load | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 106: Optical equipment for systems loaded with digital channels only | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 113: Optical systems for broadcast signal transmissions loaded with digital channels only | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 115: In-building optical systems for broadcast signal transmissions | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 11: Safety | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 13-1: Bandwidth expansion for broadcast signal over FTTH system | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 13: Optical systems for broadcast signal transmissions CORRIGENDUM 1 | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 13: Optical systems for broadcast signal transmissions | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 14: Optical transmission systems using RFoG technology | |
| Cable networks for television signals, sound signals and interactive services \x96 Part 3-1: Active wideband equipment for cable networks \x96 Methods of measurement of non-linearity for full digital channel load... | |
| Cable networks for television signals, sound signals and interactive services Part 3: Active wideband equipment for cable networks | |
| Cable networks for television signals, sound signals and interactive services Part 7-1: Hybrid Fibre Coax Outside Plant Status Monitoring Physical (PHY) Layer Specification | |
| Cable networks for television signals, sound signals and interactive services Part 7-2: Hybrid Fibre Coax Outside Plant Status Monitoring Media access Control (MAC) Layer Specification | |
| Cable networks for television signals, sound signals and interactive services Part 7-3: Hybrid Fibre Coax Outside Plant Status Monitoring Power supply to Transponder Interface Bus (PSTIB) Specification | |
| Cable networks for television signals,sound signals and interactive services \x96 Part 101: System performance of forward paths loaded with digital channels only | |
| Cabled Distribution Systems for Television and Sound Signals - Part 10: System Performance of Return Path | |
| Cabled Distribution Systems for Television and Sound Signals - Part 12: Electromagnetic Compatibility of Systems | |
| Cabled Distribution Systems for Television and Sound Signals - Part 3: Active Coaxial Wideband Distribution Equipment | |
| Cabled Distribution Systems for Television and Sound Signals - Part 4: Passive Coaxial Wideband Distribution Equipment | |
| Cabled Distribution Systems for Television and Sound Signals - Part 5: Headend Equipment | |
| Cabled Distribution Systems for Television and Sound Signals - Part 6: Optical Equipment | |
| CABLED DISTRIBUTION SYSTEMS FOR TELEVISION AND SOUND SIGNALS - PART 9: INTERFACES OF CABLES DISTRIBUTION SYSTEMS FOR DIGITALLY MODULATED SIGNALS | |
| Cabled distribution systems for television and sound signals Part 2: Electromagnetic compatibility for equipment | |
| CALCULATION OF THE LOWER AND UPPER LIMITS FOR THE AVERAGE OUTER DIMENSIONS OF CABLES WITH CIRCULAR COPPER CONDUCTORS AND OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V | |
| Caoutchouc - Compatibilit\xe9 des fluides hydrauliques avec les mat\xe9riaux \xe9lastom\xe8res de r\xe9f\xe9rence | |
| Cha\xeenes de transmission de pr\xe9cision \xe0 rouleaux et \xe0 douilles, plaques-attaches et roues dent\xe9es correspondantes RECTIFICATIF TECHNIQUE 1 | |
| Characteristics of Line Post Insulators | |
| CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 1: ENVIRONMENTALPARAMET ERS AND THEIR SEVERITIES | |
| Classification of environmental conditions - Part 2-4: Environmental conditions appearing in nature - Solar radiation and temperature | |
| Classification of Environmental Conditions - Part 2: Environmental Conditions Appearing in Nature - Section 8: Fire Exposure | |
| CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-0: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - INTRODUCTION | |
| CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-1: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STORAGE | |
| CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-2: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - TRANSPORTATION AND HANDLING | |
| CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT WEATHERPROTECTED LOCATIONS | |
| CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3-4: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - STATIONARY USE AT NON-WEATHERPROTECTED LOCATIONS | |
| Classification of Environmental Conditions - Part 3-7: Classification of Groups of Environmental Parameters and Their Severities - Portable and Non-Stationary Use | |
| Classification of Environmental Conditions - Part 3: Classification of Groups of Environmental Parameters and Their Severities Section 6: Ship Environment | |
| CLASSIFICATION OF ENVIRONMENTAL CONDITIONS \x96 Part 2-6: Environmental conditions appearing in nature \x96 Earthquake vibration and shock | |
| Classification of environmental conditions \x96 Part 2-9: Environmental conditions appearing in nature \x96 Measured shock and vibration data \x96 Storage, transportation and in-use | |
| Classification of environmental conditions \x96 Part 3-1: Classification of groups of environmental parameters and their severities \x96 Storage | |
| Classification of environmental conditions \x96 Part 3-2: Classification of groups of environmental parameters and their severities \x96 Transportation and handling | |
| Classification of environmental conditions \x96 Part 3-3: Classification of groups of environmental parameters and their severities \x96 Stationary use at weatherprotected locations | |
| Classification of environmental conditions \x96 Part 3-4: Classification of groups of environmental parameters and their severities \x96 Stationary use at non-weatherprotected locations | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Air Pressure | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature - Earthquake Vibration and Shock | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Fauna and Flora | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Precipitation and Wind | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Section 5: Dust, Sand, Salt Mist | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Solar Radiation and Temperature (Amendment 1-1988) | |
| Classification of Environmental Conditions Part 2: Environmental Conditions Appearing in Nature Temperature and Humidity | |
| Classification of Environmental Conditions Part 3: Classification of Groups of Environmental Parameters and Their Severities - Section 9: Microclimates Inside Products | |
| Common Specifications For High-Voltage Switchgear and Controlgear Standards | |
| Connecting Devices (Junction and/or Tapping) for Household and Similar Fixed Electrical Installations Part 2: Particular Requirements - Insulation Piercing Connecting Devices for Insulated Copper Conductors\xe9\xe0 | |
| Connecting Devices (Junction and/or Tapping) for Household and Similar Fixed Electrical Installations Part 2: Particular Requirements - Screwless Terminals for Connecting Copper Conductors without Special Preparation | |
| CORRIGENDUM 1 Common specifications for high-voltage switchgear and controlgear standards | |
| CORRIGENDUM 1 Low-frequency cables with polyolefin insulation and moisture barrier polyolefin sheath | |
| CORRIGENDUM 1 Thermal-links \x96 Requirements and application guide | |
| Density gauges utilizing ionizing radiation \x96 Definitions and test methods | |
| Design Guidance for Avionic Equipment | |
| Detail Specification for Electronic Components; Ferrite Cores; Assessment Level: A (IECQ QC 250101) | |
| Determination of Water in Insulating Oils, and in Oil-Impregnated Paper and Pressboard | |
| Digital Counting Ratemeters Characteristics and Test Methods First Edition | |
| Dimensions of Low-Voltage Switchgear and Controlgear Standardized Mounting on Rails for Mechanical Support of Electrical Devices in Switchgear and Controlgear Installations | |
| Directly Heated Positive Step Function Temperature Coefficient Thermistors Part 1: Blank Detail Specification Assessment Level E (IECQ QC 440001) | |
| Directly Heated Positive Step-Function Temperature Coefficient Thermistors Part I: Generic Specification (IECQ QC 440000) | |
| Discrete Semiconductor Devices and Integrated Circuits - Part 5-1: Optoelectronic Devices - General | |
| Discrete Semiconductor Devices and Integrated Circuits - Part 5-2: Optoelectronic Devices - Essential Ratings and Characteristics | |
| Discrete semiconductor devices Part 15: Isolated power semiconductor devices | |
| Dry-Type Power Transformers; (Amendment 1-1986) | |
| Electrical Equipment for the Supply of Energy to Battery-Powered Road Vehicles | |
| Electrical measuring transducers for converting A.C. and D.C. electrical quantities to analogue or digital signals | |
| ELECTRICAL MEASURING TRANSDUCERS FOR CONVERTING AC AND DC ELECTRICAL QUANTITIES TO ANALOGUE OR DIGITAL SIGNALS | |
| Expression of performance of electrochemical analyzers - Part 4: Dissolved oxygen in water measured by membrane covered amperometric sensors | |
| Expression of performance of electrochemical analyzers - Part 5: Oxidation-reduction potential or redox potential | |
| Expression of performance of electrochemical analyzers \x96 Part 2: pH value CORRIGENDUM 1 | |
| Expression of performance of electrochemical analyzers \x96 Part 2: pH value CORRIGENDUM 2 | |
| Expression of performance of electrochemical analyzers \x96 Part 3: Electrolytic conductivity CORRIGENDUM 1 | |
| Expression of Performance of Electrochemical Analyzers Part 1: General | |
| Expression of Performance of Electrochemical Analyzers Part 2: pH Value | |
| Expression of Performance of Electrochemical Analyzers Part 3: Electrolytic Conductivity | |
| Expression of the Properties of Signal Generators | |
| Expression of the Properties of Spectrum Analyzers | |
| Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products \x96 General guidelines | |
| Fire Hazard Testing - Part 1-30: Guidance for Assessing the Fire Hazard of Electrotechnical Products - Use of Preselection Testing Procedures | |
| Fire hazard testing - Part 10-2: Abnormal heat - Ball pressure test CORRIGENDUM 1 | |
| FIRE HAZARD TESTING - PART 10-2: ABNORMAL HEAT - BALL PRESSURE TEST METHOD | |
| Fire Hazard Testing - Part 10-3: Abnormal Heat - Mould Stress Relief Distortion Test | |
| FIRE HAZARD TESTING - PART 11-20: TEST FLAMES - 500 W FLAME TEST METHOD | |
| Fire Hazard Testing - Part 2-10: Glowing/Hot-Wire Based Test Methods - Glow-Wire Apparatus and Common Test Procedure | |
| Fire Hazard Testing - Part 2-12: Glowing/Hot-Wire Based Test Methods - Glow-Wire Flammability Test Method for Materials | |
| Fire Hazard Testing - Part 2-13: Glowing/Hot-Wire Based Test Methods - Glow-WIre Ignitability Test Method for Materials | |
| Fire Hazard Testing - Part 2: Glowing/Hot Wire Based Test Methods - Section 20: Hot-Wire Coil Ignitability Test on Materials | |
| Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 0: Glow-Wire Test Methods - General | |
| Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 1: Glow-Wire End-Product Test and Guidance | |
| Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 2: Glow-Wire Flammability Test on Materials | |
| Fire Hazard Testing - Part 2: Test Methods - Section 1/Sheet 3: Glow-Wire Ignitability Test on Materials | |
| Fire hazard testing - Part 2: Test methods - Section 4/sheet 0: Diffusion type and premixed type flame test methods | |
| Fire Hazard Testing - Part 2: Test Methods - Section 4/Sheet 2: 500 W Nominal Test Flames and Guidance | |
| FIRE HAZARD TESTING - PART 4: TERMINOLOGY CONCERNING FIRE TESTS FOR ELECTROTECHNICAL PRODUCTS | |
| Fire Hazard Testing - Part 5: Assessment of Potential Corrosion Damage by Fire Effluent - Section 2: Guidance on the Selection and Use of Test Methods | |
| Fire Hazard Testing - Part 6-1: Smoke Opacity - General Guidance | |
| Fire Hazard Testing - Part 7: Guidance on the Minimization of Toxic Hazards Due to Fires Involving Electrotechnical Products - Section 1: General | |
| Fire Hazard Testing - Part 8-1: Heat Release - General Guidance | |
| Fire hazard testing - Part 8-2: Heat release - Summary and relevance of test methods | |
| Fire Hazard Testing - Part 9-1: Surface Spread of Flame - General Guidance | |
| Fire hazard testing \x96 Part 1-10: Guidance for assessing the fire hazard of electrotechnical products \x96 General guidelines | |
| Fire hazard testing \x96 Part 1-11: Guidance for assessing the fire hazard of electrotechnical products \x96 Fire hazard assessment | |
| Fire hazard testing \x96 Part 1-12: Guidance for assessing the fire hazard of electrotechnical products \x96 Fire safety engineering | |
| Fire hazard testing \x96 Part 1-21: Guidance for assessing the fire hazard of electrotechnical products \x96 Ignitability \x96 Summary and relevance of test methods | |
| Fire hazard testing \x96 Part 1-40: Guidance for assessing the fire hazard of electrotechnical products \x96 Insulating liquids | |
| Fire hazard testing \x96 Part 11-10: Test flames \x96 50 W horizontal and vertical flame test methods | |
| Fire hazard testing \x96 Part 11-11: Test flames \x96 Determination of the characteristic heat flux for ignition from a non-contacting flame source | |
| Fire hazard testing \x96 Part 11-2: Test flames \x96 1 kW nominal pre-mixed flame \x96 Apparatus, confirmatory test arrangement and guidance CORRIGENDUM 1 | |
| Fire hazard testing \x96 Part 11-2: Test flames \x96 1 kW nominal pre-mixed flame \x96 Apparatus, confirmatory test arrangement and guidance | |
| Fire hazard testing \x96 Part 11-3: Test flames \x96 500 W flames \x96 Apparatus and confirmational test methods | |
| Fire hazard testing \x96 Part 11-4: Test flames \x96 50 W flame \x96 Apparatus and confirmational test method | |
| Fire hazard testing \x96 Part 11-5: Test flames \x96 Needle-flame test method \x96 Apparatus, confirmatory test arrangement and guidance | |
| FIRE HAZARD TESTING \x96 Part 2-10: Glowing/hot-wire based test methods \x96 Glow-wire apparatus and common test procedure | |
| Fire hazard testing \x96 Part 2-11: Glowing/hot-wire based test methods \x96 Glow-wire flammability test method for end-products (GWEPT) | |
| Fire hazard testing \x96 Part 2-11: Glowing/hot-wire based test methods \x96 Glow-wire flammability test method for end-products | |
| Fire hazard testing \x96 Part 2-12: Glowing/hot-wire based test methods \x96 Glow-wire flammability index (GWFI) test method for materials | |
| Fire hazard testing \x96 Part 2-13: Glowing/hot-wire based test methods \x96 Glow-wire ignition temperature (GWIT) test method for materials | |
| Fire hazard testing \x96 Part 4: Terminology concerning fire tests for electrotechnical products | |
| Fire hazard testing \x96 Part 5-1: Corrosion damage effects of fire effluent \x96 General guidance | |
| Fire hazard testing \x96 Part 6-1: Smoke obscuration \x96 General guidance | |
| Fire hazard testing \x96 Part 6-2: Smoke obscuration \x96 Summary and relevance of test methods | |
| Fire hazard testing \x96 Part 7-2: Toxicity of fire effluent \x96 Summary and relevance of test methods | |
| Fire hazard testing \x96 Part 7-3: Toxicity of fire effluent \x96 Use and interpretation of test results | |
| Fire hazard testing \x96 Part 9-2: Surface spread of flame \x96 Summary and relevance of test methods | |
| Fire hazard testing Part 1-20: Guidance for assessing the fire hazard of electrotechnical products - Ignitability - General guidance | |
| Fire hazard testing Part 11-10: Test flames - 50 W horizontal and vertical flame test methods | |
| Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and guidance | |
| Fire Hazard Testing Part 1: Guidance for the Preparation of Requirements and Test Specifications for Assessing Fire Hazard of Electrotechnical Products Guidance for Use of Preselection Procedures | |
| Fire Hazard Testing Part 2: Test Methods Bad-Connection Test with Heaters | |
| Fire Hazard Testing Part 2: Test Methods Section 2 - Needle-Flame Test | |
| Fire Hazard Testing Part 5: Assessment of Potential Corrosion Damage by Fire Effluent - Section 1: General Guidance | |
| Fire hazard testing. Part 1: Guidance for the preparation of requirements and test specifications for assessing fire hazard of electrotechnical products. Guidance for electronic components | |
| Fire hazard testing. Part 3: Examples of fire hazard assessment procedures and interpretation of results. Combustion characteristics and survey of test methods for their determination | |
| FLAMMABILITY OF SOLID NON-METALLIC MATERIALS WHEN EXPOSED TO FLAMESOURCES - LIST OF TEST METHODS | |
| Flexible Insulating Sleeving - Part 3: Specification for Individual Types of Sleeving - Sheet 136: Extruded Fluorosilicone Sleeving - General Purpose | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 151: Extruded PVC/Nitrile Rubber - General Purpose | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 212: Heat-Shrinkable Polyolefin Sleeving, Flame Retarded, Shrink Ratio 2:1 | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 213: Heat-Shrinkable Polyolefin Sleeving, Not Flame Retarded, Shrink Ratio 2:1 | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 214: Heat-Shrinkable, Polyolefin Sleeving, Not Flame Retarded, Shrink Ratio 3:1 - Thick and Medium Wall | |
| FLEXIBLE INSULATING SLEEVING - PART 3: SPECIFICATIONS FOR INDIVIDUAL TYPES OF SLEEVING - SHEET 216: HEAT-SHRINKABLE, FLAME-RETARDED, LIMITED-FIRE-HAZARD SLEEVING | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 217: Heat-Shrinkable Polyolefin Sleeving, Flame Retarded, Shrink Ratio 3:1 | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 218: Heat-Shrinkable Polyolefin Sleeving, Not Flame Retarded, Shrink Ratio 3:1 | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 228: Heat-Shrinkable Semi-Rigid, Polyvinylidene Fluoride Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1 | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 233: Heat-Shrinkable Fluoroelastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1 | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 271: Heat-Shrinkable Elastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1 | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 272: Heat-Shrinkable Elastomer Sleeving, Flame Retarded, Fluid Resistant, Shrink Ratio 2:1, Thin Wall | |
| Flexible insulating sleeving - Part 3: Specifications for individual types of sleeving - Sheet 285: Heat-shrinkable polyolefin sleeving, for medium voltage joint insulation | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheet 409: Glass Textile Sleeving with Polyurethane (PUR)-Based Coating | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 121 and 124: Extruded Silicone Sleeving | |
| Flexible Insulating Sleeving - Part 3: Specifications for Individual Types of Sleeving - Sheets 145 to 147: Extruded PTFE Sleeving | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 205: Heat-shrinkable chlorinated polyolefin sleeving, flame retarded, nominal shrink ratio 1,7:1 and 2:1 | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 214: Heat-shrinkable, polyolefin sleeving, not flame retarded, thick and medium wall | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 216: Heat-shrinkable, flame-retarded, limited-fire-hazard sleeving | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 247: Heat-shrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 247: Heatshrinkable, polyolefin sleeving, dual wall, not flame retarded, thick and medium wall | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 248: General purpose, heat-shrinkable, dual wall polyolefin sleeving, flame retarded, shrink ratios 2:1, 3:1, 4:1 | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 280: Heat-shrinkable, polyolefin sleeving, anti-tracking | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 281: Heat-shrinkable, polyolefin sleeving, semiconductive | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 282: Heat-shrinkable, polyolefin sleeving \x96 Stress control | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation IEC | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 283: Heat-shrinkable, polyolefin sleeving for bus-bar insulation | |
| Flexible insulating sleeving \x96 Part 3: Specifications for individual types of sleeving \x96 Sheet 284: Heat-shrinkable sleevings, for oil barrier applications | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 165: Extruded polyolefin, flame retarded, limited fire hazard sleeving | |
| Flexible insulating sleeving Part 3: Specifications for individual types of sleeving Sheet 229: Heat-shrinkable semi-flexible, polyvinylidene fluoride sleeving, flame retarded, fluid resistant, shrink ratio 2:1 | |
| GUIDANCE FOR ELECTROSTATIC SENSITIVE UTILIZATION AND PROTECTION | |
| Guide on Maintainability of Equipment - Part 5: Section 4: Diagnostic Testing | |
| Guide on Maintainability of Equipment - Part 6: Section 9: Statistical Methods in Maintainability Evaluation | |
| Guide on Maintainability of Equipment Part 1: Sections One, Two and Three Introduction, Requirements and Maintainability Programme | |
| Guide on Maintainability of Equipment Part 2: Section Five - Maintainability Studies During the Design Phase | |
| Guide on Maintainability of Equipment Part 3: Sections Six and Seven Verification and Collection, Analysis and Presentation of Data | |
| Guide on Maintainability of Equipment Part 4: Section 8 - Maintenance and Maintenance Support Planning | |
| Guide to the Lightning Impulse and Switching Impulse Testing of Power Transformers and Reactors | |
| Hand-Held Motor-Operated Electric Tools - Safety - Part 2-6: Particular Requirements for Hammers | |
| Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-11: Particular requirements for reciprocating saws (jig and sabre saws) | |
| Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-12: Particular requirements for concrete vibrators | |
| Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-20: Particular requirements for band saws | |
| Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-21: Particular requirements for drain cleaners | |
| Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-3: Particular requirements for grinders, polishers and disk-type sanders CORRIGENDUM 1 | |
| Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-4: Particular requirements for sanders and polishers other than disk type | |
| Hand-held motor-operated electric tools \x96 Safety \x96 Part 2-8: Particular requirements for shears and nibblers | |
| Hard Water to Be Used for Testing the Performance of Some Household Electrical Appliances | |
| Helical-Scan Video-Tape Cassette System Using 19 mm (3/4 in) Magnetic Tape, Known as U-Format | |
| Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2-11: Particular Requirements for Electrically-Opearte d Food Preparation Appliances | |
| Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2-13: Particular Requirements for Range Hoods | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-2: Particular requirements for fan heaters (Extended Version + Redline Version) | |
| HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - TEST CODE FOR THE DETERMINATION OF AIRBORNE ACOUSTICAL NOISE - PART 2-3: PARTICULAR REQUIREMENTS FOR DISHWASHERS | |
| Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-9: Particular requirements for electric hair care appliances (Extended Version + Redline Version)... | |
| Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2: Particular Requirements for Electric Shavers | |
| Household and Similar Electrical Appliances - Test Code for the Determination of Airborne Acoustical Noise - Part 2: Particular Requirements for Fans | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 1: General requirements | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-10: Particular requirements for ranges, ovens, steam ovens, grills and microwave ovens (Extended... | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-11: Particular requirements for electrically-operate d food preparation appliances (Extended Version) | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers AMENDMENT 1... | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-14: Particular requirements for refrigerators, frozen-food storage cabinets and food freezers | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-15: Particular requirements for household food waste disposers (Extended Version) | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-15: Particular requirements for household food waste disposers | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-16: Particular requirements for washer-dryers | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-17: Particular requirements for dry-cleaning robots | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-18: Particular requirements for electric water heaters | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-2: Particular requirements for fan heaters | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-3: Particular requirements for dishwashers (Extended Version) | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-8: Particular requirements for electric shavers, hair clippers or trimmers | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-9: Particular requirements for electric hair care appliances (Extended Version) | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 2-9: Particular requirements for electric hair care appliances | |
| Household and similar electrical appliances \x96 Test code for the determination of airborne acoustical noise \x96 Part 3: Procedure for determining and verifying declared noise emission values | |
| Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of... | |
| Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 2-9: Particular requirements for electric hair care appliances | |
| HOUSEHOLD MICROWAVE OVENS - METHODS FOR MEASURING PERFORMANCE | |
| Hydraulic Fluid Power - Petroleum Fluids - Prediction of Bulk Moduli First Edition | |
| In-Core Temperature or Primary Envelope Temperature Measurements in Nuclear Power Reactors Characteristics and Test Methods First Edition | |
| Indirectly Heated Thermistors with Negative Temperature Coefficient (NTC-I) | |
| Inductor and Transformer Cores for Telecommunications Part 1: Generic Specification (IECQ QC 250000) | |
| Inductor and Transformer Cores for Telecommunications Part 2: Sectional Specification: Magnetic Oxide Cores for Inductor Applications (Amendment 1-1989) (IECQ QC 250100) | |
| Inductor and Transformer Cores for Telecommunications Part 3: Blank Detail Specification: Magnetic Oxide Cores for Broad-Band Transformers Assessment Levels A and B | |
| Inductor and Transformer Cores for Telecommunications Part 3: Sectional Specification: Magnetic Oxide Cores for Broad-Band Transformers | |
| Inductor and Transformer Cores for Telecommunications Part 4: Blank Detail Specification: Magnetic Oxide Cores for Transformers and Chokes for Power Applications Assessment Level A (IECQ QC 250301) | |
| Inductor and Transformer Cores for Telecommunications Part 4: Sectional Specification: Magnetic Oxide Cores for Transformers and Chokes for Power Applications (IECQ QC 250300) | |
| Inductor and Transformer Cores for Telecommunications Part 5: Sectional Specification: Adjusters Used with Magnetic Oxide Cores for Use in Adjustable Inductors and Transformers Section 1: Blank Detail Specification - Assessment... | |
| Inductor and Transformer Cores for Telecommunications Part 5: Sectional Specification: Adjusters Used with Magnetic Oxide Cores for Use in Adjustable Inductors and Transformers; (IECQ QC 250400) | |
| Isolating Transformers and Safety Isolating Transformers - Requirements | |
| Laminations for Transformers and Inductors for Use in Telecommunication and Electronic Equipme | |
| Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials | |
| Laminations for transformers and inductors Part 1: Mechanical and electrical characteristics | |
| Low-Frequency Cables with Polyolefin Insulation and Moisture Barrier Polyethylene Sheath Part 4: Unit Type, Unfilled, Moisture Barrier Polyethylene Sheathed Cables with Copper Conductors, Solid Insulation and Integral Suspension Strand | |
| Low-Frequency Cables with Polyolefin Insulation and Moisture Barrier Polyolefin Sheath Part 2: Unit Type, Filled, Moisture Barrier Polyethylene Sheathed Cables with Copper Conductors and Solid or Cellular Insulation (Amendment 1-1983)... | |
| Low-Frequency Cables with Polyolefin Insulation and Moisture Barrier Polyolefin Sheath Part 3: Unit Type, Unfilled, Moisture Barrier Polyethylene Sheathed Cables with Copper Conductors and Solid or Cellular Insulation (Amendment 1-1983)... | |
| Low-frequency cables with polyolefin insulationand moisture barrier polyolefin sheath | |
| Measurements and Test Methods for 32 kHz Quartz Crystal Units for Wrist Watches and Standard Values | |
| Measuring Methods for Cylinder Cores, Tube Cores and Screw Cores of Magnetic Oxides First Edition | |
| Measuring Methods for Video Tape Properties | |
| Medical Electrical Equipment Dosimeters with Ionization Chambers as Used in Radiotherapy (Amendment 1-1987) | |
| Method for the Determination of the Space Required by Capacitors and Resistors with Unidirectional Terminations | |
| MINERAL INSULATED CABLES AND THEIR TERMINATIONS WITH A RATED VOLTAGE NOT EXCEEDING 750 V - PART 1: CABLES | |
| Mineral insulated cables and their terminations with a rated voltage not exceeding 750 V - Part 3: Guidance for use | |
| Mineral Insulated Cables and Their Terminations with a Rated Voltage Not Exceeding 750 V Part 2: Terminations | |
| Multichannel Amplitude Analyzers: Standards for Time-to-Amplitude Converters First Edition | |
| Multiple Controllers in a CAMAC Crate | |
| National Differences For UL 60745-2-11 Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-11: Particular Requirements for Reciprocating Saws | |
| National Differences For UL 60745-2-17 Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-17: Particular Requirements for Routers and Trimmers | |
| National Differences For UL 60745-2-23 Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools | |
| National Differences For UL60745-2-22 Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-22: Particular Requirements For Cut-Off Machines | |
| Occluded-Ear Simulator for the Measurement of Earphones Coupled to the Ear by Ear Inserts | |
| Photovoltaic devices - Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data | |
| Radiation Protection Equipment for the Measuring and Monitoring of Airborne Tritium | |
| Safety Logic Assemblies of Nuclear Power Plants Characteristics and Test Methods First Edition | |
| Safety of hand-held motor-operated electric tools. Part 2: Particular requirements for spray guns for non-flammable liquids | |
| Semiconductor devices - Discrete devices - Part 2: Rectifier diodes - Section 2: Blank detail specification for rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, for currents greater than... | |
| Semiconductor devices - Discrete devices - Part 2: Rectifier diodes - Section One: Blank detail specification for rectifier diodes (including avalanche rectifier diodes), ambient and case-rated, up to 100 A... | |
| Semiconductor devices - Discrete devices - Part 3: Signal (including switching) and regulator diodes | |
| Semiconductor Devices - Discrete Devices - Part 4-1: Microwave Diodes and Transistors - Microwave Field Effect Transistors - Blank Detail Specification | |
| Semiconductor Devices - Discrete Devices - Part 4-2: Microwave Diodes and Transistors - Integrated-Circuit Microwave Amplifiers - Blank Detail Specification | |
| Semiconductor Devices - Discrete Devices Part 3: Signal (Including Switching) and Regulator Diodes Section One - Blank Detail Specification for Signal Diodes, Switching Diodes and Controlled-Avalanche Diodes | |
| Semiconductor Devices - Discrete Devices Part 3: Signal (Including Switching) and Regulator Diodes Section Two - Blank Detail Specification for Voltage-Regulator Diodes and Voltage-Reference Diodes, Excluding Temperature-Compensa ted Precision Reference... | |
| Semiconductor Devices - Discrete Devices Part 4: Microwave Devices | |
| Semiconductor devices - Part 10: Generic specification for discrete devices and integrated circuits | |
| Semiconductor Devices - Part 12-3: Optoelectronic Devices - Blank Detail Specification for Light-Emitting Diodes - Display Application | |
| Semiconductor Devices - Part 12-4: Optoelectronic Devices - Blank Detail Specification for Pin-FET Modules with/without Pigtail, for Fibre Optic Systems or Subsystems | |
| Semiconductor Devices - Part 12-5: Optoelectronic Devices - Blank Detail Specification for Pin-Photodiodes with/without Pigtail, for Fibre Optic Systems or Subsystems | |
| Semiconductor devices - Part 12-6: Optoelectronic devices - Blank detail specification for avalanche photodiodes with/without pigtail, for fibre optic systems or subsystems | |
| Semiconductor devices - Part 12: Optoelectronic devices - Section 1: Blank detail specification for light emitting/infrared emitting diodes with/without pigtail for fibre optic systems and sub-systems | |
| Semiconductor devices - Part 12: Optoelectronic devices - Section 2: Blank detail specification for laser diode modules with pigtail for fibre optic systems and sub-systems | |
| Semiconductor devices - Part 12: Sectional specification for optoelectronic devices | |
| Semiconductor Devices - Part 14-1: Semiconductor Sensors - General and Classification | |
| Semiconductor Devices - Part 14-2: Semiconductor Sensors - Hall Elements | |
| Semiconductor Devices - Part 14-3: Semiconductor Sensors - Pressure Sensors | |
| Semiconductor Devices - Part 16-1: Microwave Integrated Circuits - Amplifiers | |
| Semiconductor Devices - Part 16-2: Microwave Integrated Circuits - Frequency Prescalers | |
| Semiconductor Devices - Part 16-3: Microwave Integrated Circuits - Frequency Converters | |
| SEMICONDUCTOR DEVICES - PART 1: GENERAL | |
| SEMICONDUCTOR DEVICES - PART 2: DISCRETE DEVICES - RECTIFIER DIODES | |
| Semiconductor devices \x96 Discrete devices \x96 Part 14-4: Semiconductor accelerometers | |
| Semiconductor devices \x96 Part 14-10: Semiconductor sensors \x96 Performance evaluation methods for wearable glucose sensors | |
| Semiconductor devices \x96 Part 14-11: Semiconductor sensors \x96 Test method of surface acoustic wave-based integrated sensors for measuring ultraviolet, illumination and temperature | |
| Semiconductor devices \x96 Part 14-5: Semiconductor sensors \x96 PN-junction semiconductor temperature sensor | |
| Semiconductor devices \x96 Part 15: Discrete devices \x96 Isolated power semiconductor devices | |
| Semiconductor devices \x96 Part 16-1: Microwave integrated circuits \x96 Amplifiers | |
| Semiconductor devices \x96 Part 16-2: Microwave integrated circuits \x96 Frequency prescalers | |
| Semiconductor devices \x96 Part 16-5: Microwave integrated circuits \x96 Oscillators | |
| Semiconductor devices \x96 Part 16-6: Microwave integrated circuits \x96 Frequency multipliers | |
| Semiconductor devices \x96 Part 16-7: Microwave integrated circuits \x96 Attenuators | |
| Semiconductor devices \x96 Part 16-8: Microwave integrated circuits \x96 Limiters | |
| Semiconductor devices \x96 Part 16-9: Microwave integrated circuits \x96 Phase shifters | |
| SEMICONDUCTOR DEVICES \x96 Part 17: Magnetic and capacitive coupler for basic and reinforced insulation | |
| Semiconductor devices \x96 Part 18-1: Semiconductor bio sensors \x96 Test method and data analysis for calibration of lens-free CMOS photonic array sensors | |
| Semiconductor devices \x96 Part 18-2: Semiconductor bio sensors \x96 Evaluation process of lens-free CMOS photonic array sensor package modules | |
| Semiconductor devices \x96 Part 18-3: Semiconductor bio sensors \x96 Fluid flow characteristics of lens-free CMOS photonic array sensor package modules with fluidic system | |
| Semiconductor devices \x96 Part 18-4: Semiconductor bio sensors \x96 Evaluation method of noise characteristics of lens-free CMOS photonic array sensors | |
| Semiconductor devices \x96 Part 18-5: Semiconductor bio sensors \x96 Evaluation method for light responsivity characteristics of lens-free CMOS photonic array sensor package modules by incident angle of light | |
| Semiconductor devices \x96 Part 19-1: Smart sensors \x96 Control scheme of smart sensors | |
| Semiconductor devices \x96 Part 1: General | |
| Semiconductor devices \x96 Part 5-10: Optoelectronic devices \x96 Light emitting diodes \x96 Test method of the internal quantum efficiency based on the room-temperature reference point | |
| Semiconductor devices \x96 Part 5-11: Optoelectronic devices \x96 Light emitting diodes \x96 Test method of radiative and nonradiative currents of light emitting diodes | |
| Semiconductor devices \x96 Part 5-13: Optoelectronic devices \x96 Hydrogen sulphide corrosion test for LED packages | |
| Semiconductor devices \x96 Part 5-14: Optoelectronic devices \x96 Light emitting diodes \x96 Test method of the surface temperature based on the thermoreflectance method | |
| Semiconductor devices \x96 Part 5-15: Optoelectronic devices \x96 Light emitting diodes \x96 Test method of the flat-band voltage based on the electroreflectance spectroscopy | |
| Semiconductor devices \x96 Part 5-16: Optoelectronic devices \x96 Light emitting diodes \x96 Test method of the flat-band voltage of GaN-based light emitting diodes based on the photocurrent spectroscopy | |
| Semiconductor Devices Discrete Devices and Integrated Circuits Part 5: Optoelectronic Devices | |
| Semiconductor devices Part 16-10: Technology Approval Schedule (TAS) for monolithic microwave integrated circuits | |
| Semiconductor devices Part 16-4: Microwave integrated circuits Switches | |
| Semiconductor devices. Discrete devices. Part 11: Sectional specification for discrete devices | |
| Separation within the Reactor Protection System | |
| SHORT-CIRCUIT TEMPERATURE LIMITS OF ELECTRIC CABLES WITH RATED VOLTAGES OF 1 KV (UM = 1,2 KV) AND 3 KV (UM = 3,6 KV) | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 201: Heat Shrinkable Sleeving, General Purpose, Flexible, Cross-Linked PVC, Shrink Ratio 2:1 | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 209: Heat Shrinkable Sleeving, General Purpose, Flame Retarded Polyolefin Shrink Ratio 2:1 | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 211: Heat-Shrinkable Sleeving, General Purpose, Semi-Rigid Polyolefin, Shrink Ratio 2:1 | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 246: Heat-Shrinkable Sleeving, Dual-Wall, Not Flame-Retarded, Polyolefin | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 300: Glass Textile Fibre Sleeving, Braided, Uncoated | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 320: Polyethylene Terephthalate Textile, Lightly Impregnated | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheet 340 to 342: Expandable Braided Polyethylene Terephthalate Textile Sleeving | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 116 to 118: Extruded Polychloroprene, General Purpose | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 121 and 122: Extruded Silicone Sleeving First Edition | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 240 to 243: Heat-Shrinkable PTFE Sleeving | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 343 to 345: Expandable Braided Ethylene Chlorotrifluoroethyl ene (E-CTFE) Textile Sleeving, Uncoated | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 400 to 402: Glass Textile Sleeving with Silicone Elastomer Coating | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 403 to 405: Glass Textile Sleeving with Acrylic Based Coating | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 406 to 408: Glass Textile Sleeving with PVC Based Coating | |
| Specification for Flexible Insulating Sleeving Part 3: Specification Requirements for Individual Types of Sleeving Sheets 420 to 422: Polyethylene Terephthalate Textile with Acrylic Based Coating | |
| Spray Drying Systems | |
| Stabilized Power Supplies, A.C. Output | |
| Subroutines for CAMAC | |
| Tables auxiliaires pour g\xe9n\xe9rateurs de vibrations - M\xe9thodes de description des caract\xe9ristiques RECTIFICATIF TECHNIQUE 1 | |
| Tables auxiliaires pour g\xe9n\xe9rateurs de vibrations, - M\xe9thodes de description des caract\xe9ristiques | |
| Terminology for Tools and Equipment to Be Used in Live Working (Amendment 1-1995) | |
| Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements for Forced Draught Convection Heaters | |
| Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements for Room Heaters of the Storage Type | |
| Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements for Tumble-Dryers | |
| Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements for Vacuum Cleaners | |
| Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 2: Particular Requirements for Washing Machines and Spin Extractors | |
| Test Code for the Determination of Airborne Acoustical Noise Emitted by Household and Similar Electrical Appliances Part 3: Procedure for Determining and Verifying Declared Noise Emission Values | |
| Test Method for the Evaluation of Bond Strength of Impregnating Varnishes by the Wire Bundle Test | |
| Test Methods for Electroheating Installations with Electron Guns | |
| Testing of Semiconductor Valves for High-Voltage D.C. Power Transmission | |
| Thermal-links \x96 Requirements and application guide | |
| Thermistors - Directly Heated Positive Step-Function Temperature Coefficient - Part 1-2: Blank Detail Specification - Heating Element Application - Assessment Level EZ | |
| Thermistors - Directly Heated Positive Step-Function Temperature Coefficient - Part 1-3: Blank Detail Specification - Inrush Current Application - Assessment Level EZ | |
| Thermistors - Directly Heated Positive Step-Function Temperature Coefficient - Part 1-4: Blank Detail Specification - Sensing Application - Assessment Level EZ | |
| THYRISTOR VALVES FOR HIGH VOLTAGE DIRECT CURRENT (HVDC) POWER TRANSMISSION - PART 1: ELECTRICAL TESTING | |
| THYRISTOR VALVES FOR HIGH VOLTAGE DIRECT CURRENT (HVDC) POWER TRANSMISSION \x96 Part 2: Terminology | |
| Thyristor valves for high voltage direct current (HVDC) power transmission \x96 Part 3: Essential ratings (limiting values) and characteristics | |
| Thyristor valves for high voltage direct current (HVDC) power transmission Part 2: Terminology | |
| Type C helical video tape recorders | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 1: General Requirements | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-14: Particular Requirements for Planers | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-17: Particular Requirements for Routers and Trimmers | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-1: Particular Requirements for Drills and Impact Drills | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-2: Particular Requirements for Screwdrivers and Impact Wrenches | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-4: Particular Requirements for Sanders and Polishers Other Than Disk Type | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-6: Particular Requirements for Hammers | |
| UL Standard for Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-9: Particular Requirements for Tappers | |
| UL Standard for Hand-Held Motor-Operated Electric Tools Safety Part 2-5: Particular Requirements for Circular Saws | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use, Part 1: General Requirements | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use, Part 2-5: Particular Requirements for Automatic Electrical Burner Control Systems | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Air Flow, Water Flow and Water Level Sensing Controls | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Pressure Sensing Controls Including Mechanical Requirements | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water and Air Flow Sensing Controls, Including Mechanical Requirements | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water Level Controls of the Float Type for Household and Similar... | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Automatic Electrical Water Level Operating Controls of the Float Type for Household and... | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electric Actuators | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Door Locks | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Motor Starting Relays | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Electrically Operated Water Valves, Including Mechanical Requirements | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Energy Regulators | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Humidity Sensing Controls | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Motor Starting Relays | |
| UL Standard for Safety Automatic Electrical Controls For Household and Similar Use; Part 2: Particular Requirements For Temperature Sensing Controls | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Motor Protectors for Motor-Compressors of Hermetic and Semi-Hermetic Type | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Motor Protectors | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Thermal Protectors for Ballasts for Tubular Fluorescent Lamps | |
| UL Standard for Safety Automatic Electrical Controls for Household and Similar Use; Part 2: Particular Requirements for Timers and Time Switches | |
| UL Standard for Safety for Automatic Electrical Controls \x96 Part 2-22: Particular Requirements for Thermal Motor Protectors | |
| UL Standard for Safety for Thermal-Links for Use in Electrical Appliances and Components | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools - Safety - Part 2-12: Particular Requirements for Concrete Vibrators | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools - Safety - Part 2-18: Particular Requirements for Strapping Tools | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools - Safety - Part 2-19: Particular Requirements For Jointers | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools - Safety - Part 2-20: Particular Requirments for Band Saws | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools - Safety - Part 2-21: Particular Requirements for Drain Cleaners | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-11: Particular Requirements for Reciprocating Saws | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-13: Particular Requirements for Chain Saws | |
| UL Standard for safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-15: Particular Requirements for Hedge Trimmers | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-16: Particular Requirements for Tackers | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-22: Particular Requirements For Cut-Off Machines | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-23: Particular Requirements for Die Grinders and Small Rotary Tools | |
| UL Standard for Safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-3: Particular Requirements for Grinders, Polishers and Disk-Type Sanders | |
| UL Standard for safety Hand-Held Motor-Operated Electric Tools \x96 Safety \x96 Part 2-8: Particular Requirements for Shears and Nibblers |
| << Prev | Next >> |