Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
250
300
350
400
450
500
520
530
540
550
560
570
578
579
580
581
582
583
584
585
586
587
588
589
590
600
610
620
630
640
650
700
750
800
850
900
950
1000
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Determination of sound immission from sound sources placed close to the ear - Part 2: Technique using a manikin (ISO 11904-2:2021) | |
| Acoustics - Determination of sound insulation performances of enclosures - Part 1: Measurements under laboratory conditions (for declaration purposes) (ISO 11546-1:1995) | |
| Acoustics - Determination of sound insulation performances of enclosures - Part 2: Measurements in situ (for acceptance and verification purposes) (ISO 11546-2:1995) | |
| Acoustics - Measurement of insertion loss of ducted silencers without flow - Laboratory survey method (ISO 11691:1995) | |
| Acoustics - Measurement of the influence of road surfaces on traffic noise - Part 2: The close-proximity method (ISO 11819-2:2017) | |
| Acoustics - Noise emitted by machinery and equipment - Rules for the drafting and presentation of a noise test code (ISO 12001:1996) | |
| Acoustics - Procedure for the comparison of noise emission-data for machinery and equipment (ISO 11689:1996); Corrigendum 1 to English translation of DIN EN ISO 11689:1997-03 | |
| Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) | |
| Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003) | |
| Advanced automation technologies and their applications - Requirements for establishing manufacturing enterprise process interoperability - Part 1: Framework for enterprise interoperability (ISO 11354-1:2011) | |
| Agricultural and forestry machinery - Safety requirements and testing for portable, hand-held, powered brush-cutters and grass-trimmers - Part 2: Machines for use with back-pack power unit (ISO 11806-2:2011) | |
| Agricultural irrigation equipment - Centre-pivot and moving lateral irrigation machines with sprayer or sprinkler nozzles - Determination of uniformity of water distribution (ISO 11545:2009) | |
| Akustik - Messung der Schalldaemmung von Schallschutzkabinen - Messungen im Labor und im Einsatzfall (ISO 11957:1996); Deutsche Fassung EN ISO 11957:2009 | |
| Akustik - Messung der Schalldaempfung von versetzbaren Schallschirmen im Einsatzfall (ISO 11821:1997); Deutsche Fassung EN ISO 11821:1997 | |
| Akustik - Messung des Einflusses von Strassenoberflaechen auf Verkehrsgeraeusche - Teil 1: Statistisches Vorbeifahrtverfahren (ISO 11819-1:1997); Deutsche Fassung EN ISO 11819-1:2001 | |
| Akustik - Messungen an Schalldaempfern im Einsatzfall (ISO 11820:1996); Deutsche Fassung EN ISO 11820:1996 | |
| Akustik - Richtlinien fuer die Gestaltung laermarmer maschinenbestueckter Arbeitsstaetten - Teil 1: Allgemeine Grundlagen (ISO 11690-1:1996); Deutsche Fassung EN ISO 11690-1:1996 | |
| Akustik - Richtlinien fuer die Gestaltung laermarmer maschinenbestueckter Arbeitsstaetten - Teil 2: Laermminderungsmassn ahmen (ISO 11690-2:1996); Deutsche Fassung EN ISO 11690-2:1996 | |
| Akustik - Richtlinien fuer die Gestaltung laermarmer maschinenbestueckter Arbeitsstaetten - Teil 3: Schallausbreitung und -vorausberechnung in Arbeitsraeumen (ISO/TR 11690-3:1997); Deutsche Fassung EN ISO 11690-3:1998 | |
| Akustik - Vorgehensweise fuer den Vergleich von Geraeuschemissionswe rten fuer Maschinen und Geraete (ISO 11689:1996); Deutsche Fassung EN ISO 11689:1996 | |
| Aluminiumpigmente fuer Beschichtungsstoffe - Teil 1: Allgemeine Aluminiumpigmente (ISO 1247-1:2021); Deutsche Fassung EN ISO 1247-1:2023 | |
| Aluminiumpigmente fuer Beschichtungsstoffe - Teil 2: Vakuummetallisierte Aluminiumpaste (ISO 1247-2:2021); Deutsche Fassung EN ISO 1247-2:2023 | |
| Animal and vegetable fats and oils - Determination of individual and total sterols contents - Gas chromatographic method (ISO 12228:1999) | |
| Animal and vegetable fats and oils - Enzymatic determination of total sterols content (ISO 11702:2009) | |
| Animal feeding stuff, cereals and milled cereal products - Guidelines for the application of near infrared spectrometry (ISO 12099:2010) | |
| Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:2007) | |
| Assistive products for walking, manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:2024) | |
| Augen- und Gesichtsschutz - Sonnenbrillen und aehnlicher Augenschutz - Teil 2: Filter fuer die direkte Beobachtung der Sonne (ISO 12312-2:2015); Deutsche Fassung EN ISO 12312-2:2015 | |
| Augen- und Gesichtsschutz - Sonnenbrillen und aehnlicher Augenschutz - Teil 2: Filter fuer die direkte Beobachtung der Sonne (ISO/DIS 12312-2:2025); Deutsche und Englische Fassung prEN ISO 12312-2:2025 | |
| Augenoptik - Kontaktlinsen und Kontaktlinsenpflegem ittel - Bestimmung der Aufnahme und Wiederfreisetzung von Konservierungsmittel n (ISO/DIS 11986:2025); Deutsche und Englische Fassung prEN ISO 11986:2025 | |
| Augenoptik - Kontaktlinsen und Kontaktlinsenpflegem ittel - Bestimmung der physikalischen Vertraeglichkeit von Kontaktlinsenpflegem itteln mit Kontaktlinsen (ISO 11981:2009); Deutsche Fassung EN ISO 11981:2009 | |
| Augenoptik - Kontaktlinsen und Kontaktlinsenpflegem ittel - Leitfaden fuer die klinische Pruefung (ISO 11980:2009); Deutsche Fassung EN ISO 11980:2009 | |
| Augenoptik - Kontaktlinsen und Kontaktlinsenpflegem ittel - Leitfaden fuer die klinische Pruefung (ISO/DIS 11980:2024); Deutsche und Englische Fassung prEN ISO 11980:2024 | |
| Bauakustik - Berechnung der akustischen Eigenschaften von Gebaeuden aus den Bauteileigenschaften - Teil 2: Trittschalldaemmung zwischen Raeumen (ISO 12354-2:2017); Deutsche Fassung EN ISO 12354-2:2017 | |
| Bauakustik - Berechnung der akustischen Eigenschaften von Gebaeuden aus den Bauteileigenschaften - Teil 3: Luftschalldaemmung von Aussenbauteilen gegen Aussenlaerm (ISO 12354-3:2017); Deutsche Fassung EN ISO 12354-3:2017 | |
| Bauwesen - Organisation von Daten zu Bauwerken - Teil 3: Struktur fuer den objektorientierten Informationsaustausc h (ISO 12006-3:2007); Englische Fassung EN ISO 12006-3:2016 | |
| Berichtigungen zu DIN EN ISO 11670:2003-10; Deutsche Fassung EN ISO 11670:2003/AC:2004 | |
| Beschichtungsstoffe - Bestimmung der Bestaendigkeit bei zyklischen Korrosionsbedingunge n - Teil 2: Nass (Salzspruehnebel)/tr ocken/Feuchte/UV-Str ahlung (ISO/DIS 11997-2:2024); Deutsche und Englische Fassung prEN ISO 11997-2:2024 | |
| Beschichtungsstoffe - Bestimmung der Nassabriebbestaendig keit und der Reinigungsfaehigkeit von Beschichtungen (ISO 11998:2006); Deutsche Fassung EN ISO 11998:2006 | |
| Beschichtungsstoffe - Bestimmung der Nassabriebbestaendig keit von Beschichtungen (ISO/DIS 11998:2025); Deutsche und Englische Fassung prEN ISO 11998:2025 | |
| Bestimmung von Gold in Gold-Schmucklegierun gen - Dokimastisches Verfahren (ISO 11426:1997); Deutsche Fassung EN ISO 11426:1998 | |
| Bestimmung von Palladium in Palladium-Schmuckleg ierungen - Gravimetrische Bestimmung mit Dimethylglyoxim (ISO 11490:1995); Deutsche Fassung EN ISO 11490:1995 | |
| Bestimmung von Platin in Platin-Schmucklegier ungen - Gravimetrische Bestimmung durch Reduktion mit Quecksilber(I)-Chlor id (ISO 11489:1995); Deutsche Fassung EN ISO 11489:1995 | |
| Binders for paints and varnishes - Amino resins - General methods of test (ISO 11908:2025) | |
| Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO 11909:2007) | |
| Binders for paints and varnishes - Polyisocyanate resins - General methods of test (ISO/DIS 11909:2025); German and English version prEN ISO 11909:2025 | |
| Bodenbeschaffenheit - Anleitung fuer Auswahl und Anwendung von Vor-Ort-Verfahren (ISO 12404:2011); Deutsche Fassung EN ISO 12404:2015 | |
| Bodenbeschaffenheit - Anleitung fuer Laboratoriumsuntersu chungen zur biologischen Abbaubarkeit von organischen Chemikalien im Boden unter aeroben Bedingungen (ISO 11266:1994); Deutsche Fassung EN ISO 11266:2020 | |
| Bodenbeschaffenheit - Bestimmung der effektiven Kationenaustauschkap azitaet und der Basensaettigung unter Verwendung von Bariumchloridloesung (ISO 11260:1994+Cor. 1:1996); Deutsche Fassung EN ISO 11260:2011 | |
| Bodenbeschaffenheit - Bestimmung der ungesaettigten hydraulischen Leitfaehigkeit und des Wasserrueckhalteverm oegens - Verdunstungsverfahre n nach Wind (ISO 11275:2004); Deutsche Fassung EN ISO 11275:2014 | |
| Bodenbeschaffenheit - Bestimmung der Wirkungen von Schadstoffen auf die Bodenflora - Teil 2: Wirkung von verunreinigten Boeden auf Saatauflauf und fruehes Wachstum hoeherer Pflanzen (ISO 11269-2:2012); Deutsche Fassung EN ISO... | |
| Bodenbeschaffenheit - Bestimmung des Porenwasserdrucks - Tensiometerverfahren (ISO 11276:1995); Deutsche Fassung EN ISO 11276:2014 | |
| Bodenbeschaffenheit - Bestimmung von ausgewaehlten Explosivstoffen und verwandten Verbindungen - Teil 3: Verfahren mittels Fluessigkeitschromat ographie mit Tandem-Massenspektro metrie (LC-MS/MS) (ISO 11916-3:2021); Deutsche Fassung EN ISO 11916-3:2021 | |
| Bodenbeschaffenheit - Hemmung der Reproduktion von Collembolen (Folsomia candida) durch Verunreinigungen (ISO 11267:2014); Deutsche Fassung EN ISO 11267:2014 | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 1: Airborne sound insulation between rooms (ISO 12354-1:2017) | |
| Building acoustics - Estimation of acoustic performance of buildings from the performance of elements - Part 4: Transmission of indoor sound to the outside (ISO 12354-4:2017) | |
| Building and civil engineering sealants - Determination of resistance to compression (ISO 11432:2021) | |
| Building construction - Jointing products - Classification and requirements for sealants (ISO 11600:2002 + Amd 1:2011) | |
| Building construction - Organization of information about construction works - Part 2: Framework for classification (ISO 12006-2:2015) | |
| Building construction - Organization of information about construction works - Part 2: Framework for classification and breakdown structures (ISO/DIS 12006-2:2024); German and English version prEN ISO 12006-2:2024 | |
| Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 3: Design and dimensioning (ISO 11855-3:2012) | |
| Building environment design - Design, dimensioning, installation and control of embedded radiant heating and cooling systems - Part 5: Installation (ISO 11855-5:2012) | |
| Clothing to protect against heat and flame - Determination of contact heat transmission through clothing or constituent materials - Part 1: Contact heat produced by heating cylinder (ISO 12127-1:2015) | |
| Colorimetry - Part 3: CIE tristimulus values (ISO 11664-3:2012) | |
| Colorimetry - Part 4: CIE 1976 L*a*b* Colour space (ISO 11664-4:2008) | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 1: Threaded ports (ISO 1179-1:2007) | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 3: Light-duty (L series) stud ends with... | |
| Connections for general use and fluid power - Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing - Part 4: Stud ends for general use only... | |
| Contact lenses - Ageing by exposure to UV and visible radiation (in vitro method) (ISO 11985:1997) | |
| Contact lenses - Determination of shelf-life (ISO 11987:1997) | |
| Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999); English version of DIN EN ISO 11986 | |
| Contact lenses and contact lens care products - Information supplied by the manufacturer (ISO 11978:2000); English version of DIN EN ISO 11978 | |
| Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheres - Part 3: Measurement of environmental parameters affecting indoor corrosivity (ISO 11844-3:2006) | |
| Corrosion of metals and alloys - Corrosion tests in artificial atmosphere - Accelerated outdoor test by intermittent spraying of a salt solution (Scab test) (ISO 11474:1998) | |
| Corrosion of metals and alloys - Determination of resistance to intergranular corrosion of solution heat-treatable aluminium alloys (ISO 11846:1995) | |
| Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) | |
| Crude petroleum and petroleum products - Determination of density using the oscillating U-tube method (ISO 12185:1996) | |
| Dentistry - Single-use cartridges for local anaesthetics (ISO 11499:2007) | |
| Determination of individual and total sterols contents - Gas chromatographic method - Part 1: Animal and vegetable fats and oils (ISO 12228-1:2014) | |
| Determination of individual and total sterols contents - Gas chromatographic method - Part 2: Olive and olive pomace oils (ISO 12228-2:2014) | |
| Determination of nitrogen in water - Part 1: Method using oxidative digestion with peroxodisulfate (ISO 11905-1:1997) | |
| Determination of resistance of cellulose-containing textiles to micro-organisms - Soil burial test - Part 1: Assessment of rot-retardant finishing (ISO 11721-1:2001); English version of DIN EN ISO 11721-1 | |
| Diesel fuel - Assessment of lubricity using the high-frequency reciprocating rig (HFRR) - Part 1: Test method (ISO 12156-1:2006) | |
| Eisenoxid-Pigmente - Anforderungen und Pruefverfahren (ISO 1248:2006, einschliesslich Technische Korrektur 1:2007); Deutsche Fassung EN ISO 1248:2008 | |
| Erdgas - Berechnung von Realgasfaktoren - Teil 1: Einfuehrung und Leitfaden (ISO 12213-1:2006); Deutsche Fassung EN ISO 12213-1:2009 | |
| Erdgas - Berechnung von Realgasfaktoren - Teil 2: Berechnungen basierend auf einer molaren Gasanalyse als Eingangsgroesse (ISO 12213-2:2006); Deutsche Fassung EN ISO 12213-2:2009 | |
| Erdoel- und Erdgasindustrie - Spiralfoermige Waermetauscher (ISO 12211:2012); Englische Fassung EN ISO 12211:2012 | |
| Erdoel- und Erdgasindustrie - Stahl-Bohrrohre (ISO 11961:2008); Englische Fassung EN ISO 11961:2008 + AC:2009 | |
| Erdoel- und Erdgasindustrie - Stahlrohre zur Verwendung als Futter- oder Steigrohre fuer Bohrungen (ISO 11960:2004); Englische Fassung EN ISO 11960:2004 | |
| Ergonomics of the thermal environment - Principles and application of relevant international standards; English version of DIN EN ISO 11399 | |
| Evaluation of the 'ultimate' anaerobic biodegradability of organic compounds in digested sludge - Method by measurement of the biogas production (ISO 11734:1995) | |
| Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2013) | |
| Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO 12312-1:2022) | |
| Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use - Amendment 1 (ISO 12312-1:2022/DAM 1:2025); German and English version EN ISO 12312-1:2022/prA1:20 25... | |
| Fahrraeder - Gepaecktraeger fuer Fahrraeder - Anforderungen und Pruefverfahren (ISO 11243:2016); Deutsche Fassung EN ISO 11243:2016 | |
| Farbmetrik - Teil 1: CIE farbmetrische Normalbeobachter (ISO 11664-1:2007); Deutsche Fassung EN ISO 11664-1:2011, Berichtigung zu DIN EN ISO 11664-1:2011-07 | |
| Farbmetrik - Teil 1: CIE farbmetrische Normalbeobachter (ISO 11664-1:2007); Deutsche Fassung EN ISO 11664-1:2011 | |
| Farbmetrik - Teil 2: CIE Normlichtarten (ISO 11664-2:2007); Deutsche Fassung EN 11664-2:2011 | |
| Farbmetrik - Teil 5: CIE 1976 L*u*v* Farbenraum und gleichabstaendige u', v'-Farbtafel (ISO 11664-5:2009); Deutsche Fassung EN ISO 11664-5:2011 | |
| Farbmetrik - Teil 6: CIEDE2000 Formel fuer den Farbabstand (ISO/CIE 11664-6:2014); Deutsche Fassung EN ISO 11664-6:2016 | |
| Faserverstaerkte Kunststoffe - Formmassen und Prepregs - Bestimmung des Gehaltes an Harz, Verstaerkungsfaser und Mineralfuellstoff - Aufloesungsverfahren (ISO 11667:1997); Deutsche Fassung EN ISO 11667:1999 | |
| Faserverstaerkte Kunststoffe - Haertbare Formmassen und Prepregs - Bestimmung der Fliessfaehigkeit, Reifung und Gebrauchsdauer (ISO 12115:1997); Deutsche Fassung EN ISO 12115:1997 | |
| Faserverstaerkte Kunststoffe - Haertbare Formmassen und Prepregs - Bestimmung des Haertungsverhaltens (ISO 12114:1997); Deutsche Fassung EN ISO 12114:1997 | |
| Feste Umweltmatrizes - Bestimmung der spezifischen elektrischen Leitfaehigkeit (ISO/DIS 11265:2024); Deutsche und Englische Fassung prEN ISO 11265:2024 | |
| Fibre ropes - Polyamide - 3-, 4-, 8- and 12- strand ropes (ISO 1140:2012); English version EN ISO 1140:2012 | |
| Fibre ropes - Polyester - 3-, 4- and 8-strand ropes (ISO 1141:2004) | |
| Flussmittelgefuellte Roehrenlote - Festlegung und Pruefverfahren - Teil 2: Bestimmung des Flussmittelgehaltes (ISO 12224-2:1997); Deutsche Fassung EN ISO 12224-2:1999 | |
| Forstmaschinen - Generelle Sicherheitsanforderu ngen (ISO 11850:2011); Deutsche Fassung EN ISO 11850:2011 | |
| Forstmaschinen - Sicherheitstechnisch e Anforderungen und Pruefung fuer motorbetriebene Hochentaster (ISO/DIS 11680:2024); Deutsche und Englische Fassung prEN ISO 11680:2024 | |
| Forstmaschinen - Sicherheitstechnisch e Anforderungen und Pruefung fuer motorbetriebene Hochentaster - Teil 1: Geraete mit integriertem Verbrennungsmotor (ISO 11680-1:2000); Deutsche Fassung EN ISO 11680-1:2008 | |
| Forstmaschinen - Sicherheitstechnisch e Anforderungen und Pruefung fuer motorbetriebene Hochentaster - Teil 2: Geraete mit rueckengetragener Antriebseinheit (ISO 11680-2:2000); Deutsche Fassung EN ISO 11680-2:2008, Berichtigung zu DIN EN ISO 11680-2:2009-01... | |
| Forstmaschinen - Sicherheitstechnisch e Anforderungen und Pruefung fuer motorbetriebene Hochentaster - Teil 2: Geraete mit rueckengetragener Antriebseinheit (ISO 11680-2:2000); Deutsche Fassung EN ISO 11680-2:2008 | |
| Forstmaschinen - Sicherheitstechnisch e Anforderungen und Pruefung fuer tragbare Kettensaegen - Teil 1: Kettensaegen fuer die Waldarbeit (ISO 11681-1:2004, einschliesslich Amd 1:2007); Deutsche Fassung EN ISO 11681-1:2008 | |
| Forstmaschinen - Sicherheitstechnisch e Anforderungen und Pruefungen fuer tragbare Kettensaegen - Teil 2: Kettensaegen fuer die Baumpflege (ISO 11681-2:2006); Deutsche Fassung EN ISO 11681-2:2008, Berichtigung zu DIN EN ISO 11681-2:2009-02... | |
| Forstmaschinen - Sicherheitstechnisch e Anforderungen und Pruefungen fuer tragbare Kettensaegen - Teil 2: Kettensaegen fuer die Baumpflege (ISO 11681-2:2006); Deutsche Fassung EN ISO 11681-2:2008 | |
| Fugendichtstoffe fuer Hoch- und Tiefbau - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen nach Einwirkung von Waerme, Wasser und kuenstlichem Licht durch Glas (ISO/DIS 11431:2024); Deutsche und Englische Fassung prEN... | |
| Gas cylinders - Acetylene cylinders - Filling conditions and filling inspection (ISO 11372:2011) | |
| Gas cylinders - Composite construction - Periodic inspection and testing (ISO 11623:2015) | |
| Gas cylinders - Cylinder bundles for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 11755:2005) | |
| Gas cylinders - High pressure cylinders for the on-board storage of natural gas as a fuel for automotive vehicles (ISO 11439:2000); English version of DIN EN ISO 11439 | |
| Gas cylinders - Outlet connections for gas cylinder valves for compressed breathable air (ISO 12209:2013) | |
| Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit Gasflaschen - Teil 1: Spezifikationen (ISO 11363-1:2010); Deutsche Fassung EN ISO 11363-1:2010 | |
| Gasflaschen - 17E und 25E kegeliges Gewinde zur Verbindung von Ventilen mit Gasflaschen - Teil 2: Prueflehren (ISO 11363-2:2010); Deutsche Fassung EN ISO 11363-2:2010 | |
| Gasflaschen - Verfahren fuer den Wechsel der Gasart (ISO 11621:1997); Deutsche Fassung EN ISO 11621:2005 | |
| Geokunststoffe - Stempeldurchdrueckve rsuch (CBR-Versuch) (ISO 12236:2006); Deutsche Fassung EN ISO 12236:2006 | |
| Geokunststoffe - Stempeldurchdrueckve rsuch (CBR-Versuch) (ISO/DIS 12236:2024); Deutsche und Englische Fassung prEN ISO 12236:2024 | |
| Geometrical product specifications (GPS) - Cylindricity - Part 2: Specification operators (ISO 12180-2:2011) | |
| Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO 12181-1:2011) | |
| Geometrical product specifications (GPS) - Roundness - Part 2: Specification operators (ISO 12181-2:2011) | |
| Geometrical Product Specifications (GPS) - Surface texture: Profile method - Motif parameters (ISO 12085:1996); Corrigendum 1 to English translation of DIN EN ISO 12085:1998-05 | |
| Geometrische Produktspezifikation (GPS) - Oberflaechenbeschaff enheit: Profil - Kalibrierung von Tastschnittgeraeten (ISO/DIS 12179:2025); Deutsche und Englische Fassung prEN ISO 12179:2025 | |
| Geometrische Produktspezifikation (GPS) - Oberflaechenbeschaff enheit: Tastschnittverfahren - Kalibrierung von Tastschnittgeraeten (ISO 12179:2000); Deutsche Fassung EN ISO 12179:2000, Berichtigung zu DIN EN ISO 12179:2000-11; Deutsche Fassung EN ISO 12179:2000/AC: | |
| Geometrische Produktspezifikation (GPS) - Oberflaechenbeschaff enheit: Tastschnittverfahren - Kalibrierung von Tastschnittgeraeten (ISO 12179:2000); Deutsche Fassung EN ISO 12179:2000 | |
| Geometrische Produktspezifikation (GPS) - Zylindrizitaet - Teil 1: Begriffe und Kenngroessen der Zylinderform (ISO 12180-1:2011); Deutsche Fassung EN ISO 12180-1:2011 | |
| Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsg las - Teil 1: Definitionen und Beschreibung von Bestandteilen (ISO 12543-1:1998); Deutsche Fassung EN ISO 12543-1:1998 | |
| Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsg las - Teil 2: Verbund-Sicherheitsg las (ISO 12543-2:2011); Deutsche Fassung EN ISO 12543-2:2011 | |
| Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsg las - Teil 3: Verbundglas (ISO 12543-3:1998); Deutsche Fassung EN ISO 12543-3:1998 | |
| Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsg las - Teil 5: Masse und Kantenbearbeitung (ISO 12543-5:1998); Deutsche Fassung EN ISO 12543-5:1998 | |
| Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsg las - Teil 6: Aussehen (ISO 12543-6:1998); Deutsche Fassung EN ISO 12543-6:1998 | |
| Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011) | |
| GPS - Surface texture: Profile method - Metrological characteristics of phase correct filters (ISO 11562:1996); English version of DIN EN ISO 11562 | |
| GPS - Surface texture: Profile method - Motif parameters (ISO 12085:1996) | |
| Gummi- und Kunststoffschlaeuche - Bestrahlung mit Xenonbogenlampe - Bestimmung der Aenderungen von Farbe und Aussehen (ISO 11758:1995); Deutsche Fassung EN ISO 11758:1997 | |
| Hartmetalle - Bestimmung des Calcium-, Kupfer-, Eisen-, Kalium-, Magnesium-, Mangan-, Natrium-, Nickel- und Zinkgehaltes in Kobalt-Metallpulvern - Verfahren mit Flammen-Atomabsorpti onsspektrometrie (ISO 11876:2010); Deutsche Fassung EN ISO 11876:2010 | |
| Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management (ISO 12052:2006); English version EN ISO 12052:2011 | |
| Health informatics - Digital imaging and communication in medicine (DICOM) including workflow and data management (ISO/DIS 12052:2025); English version prEN ISO 12052:2025 | |
| Health informatics - Explicit time-related expressions for healthcare-specific problems (ISO 12381:2019); English version EN ISO 12381:2019 | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of... | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on substances (ISO 11238:2012) | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) | |
| Health informatics - Identification of medicinal products - Data elements and structures for unique identification and exchange of regulated pharmaceutical product information (ISO/DIS 11616:2025); German and English version prEN ISO... | |
| Hexagon socket head cap screws with metric fine pitch thread (ISO 12474:2010) | |
| Hochbau - Fugendichtstoffe - Bestimmung des Haft- und Dehnverhaltens von Dichtstoffen nach Einwirkung von Waerme, Wasser und kuenstlichem Licht durch Glas (ISO 11431:2002); Deutsche Fassung EN ISO 11431:2002 | |
| Holzwerkstoffe - Bestimmung der Formaldehydabgabe - Teil 2: Kleinpruefkammerverf ahren (ISO 12460-2:2024); Deutsche Fassung EN ISO 12460-2:2025 | |
| Holzwerkstoffe - Bestimmung der Formaldehydabgabe - Teil 2: Kleinpruefkammerverf ahren (ISO 12460-2:2024); Deutsche und Englische Fassung prEN ISO 12460-2:2024 | |
| Holzwerkstoffe - Bestimmung der Formaldehydabgabe - Teil 4: Exsikkator-Verfahren (ISO 12460-4:2016); Deutsche Fassung EN ISO 12460-4:2016 | |
| Hygrothermal performance of building materials and products - Determination of moisture content by drying at elevated temperature (ISO 12570:2000); English version of DIN EN ISO 12570 | |
| Industrieventilatore n - Mechanische Sicherheit von Ventilatoren - Beruehrungsschutz (ISO 12499:1999); Deutsche Fassung EN ISO 12499:2008 | |
| Integrated optics - Vocabulary - Part 1: Basic terms and symbols (ISO 11807-1:2001) | |
| Integrierte Optik - Begriffe - Teil 2: Begriffe fuer die Klassifizierung (ISO 11807-2:2021); Deutsche Fassung EN ISO 11807-2:2021 | |
| Jewellery - Determination of palladium in palladium jewellery alloys - ICP-OES method using yttrium as internal standard element (ISO 11495:2014) | |
| Jewellery - Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using potassium bromide (ISO 11427:2014) | |
| Jewellery and precious metals - Sampling of precious metals and precious metal alloys (ISO 11596:2021); German and English version prEN ISO 11596:2025 | |
| Kardiovaskulaere Implantate und extrakorporale Systeme - Vaskulaere Medizinprodukt-Arzne imittel Kombinationsprodukte (ISO/DIS 12417-1:2014); Deutsche Fassung prEN ISO 12417-1:2014 | |
| Kardiovaskulaere Implantate und extrakorporale Systeme - Vaskulaere Medizinprodukt-Arzne imittel-Kombinations produkte - Teil 1: Allgmeine Anforderungen (ISO 12417-1:2015); Deutsche Fassung EN ISO 12417-1:2015 | |
| Klassifizierung von Kunststoff-Rohrleitu ngssystemen fuer die Renovierung und Informationen zur Planung (ISO 11295:2010); Deutsche Fassung EN ISO 11295:2010 | |
| Klebstoffe - T-Schaelpruefung fuer geklebte Verbindungen aus flexiblen Fuegeteilen (ISO 11339:2010); Deutsche Fassung EN ISO 11339:2010 | |
| Kleine Wasserfahrzeuge - Fenster, Bullaugen, Luken, Seeschlagblenden und Tueren - Anforderungen an die Festigkeit und Dichtheit (ISO 12216:2002); Deutsche Fassung EN ISO 12216:2002 | |
| Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 10: Takelagelasten und Takelagezubehoer von Segelbooten (ISO 12215-10:2020); Deutsche Fassung EN ISO 12215-10:2020 | |
| Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 6: Bauanordnung und Details (ISO 12215-6:2008); Deutsche Fassung EN ISO 12215-6:2008 | |
| Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 9: Anhaenge von Segelbooten (ISO 12215-9:2012); Deutsche Fassung EN ISO 12215-9:2012 | |
| Kleine Wasserfahrzeuge - Rumpfbauweise und Dimensionierung - Teil 9: Anhaenge von Segelbooten (ISO/DIS 12215-9:2024); Deutsche und Englische Fassung prEN ISO 12215-9:2024 | |
| Kleine Wasserfahrzeuge - Schutz vor Start unter Last (ISO 11547:1994); Deutsche Fassung EN ISO 11547:1995 | |
| Kleine Wasserfahrzeuge - Stabilitaets- und Auftriebsbewertung und Kategorisierung - Teil 3: Boote unter 6 m Rumpflaenge (ISO 12217-3:2015); Deutsche Fassung EN ISO 12217-3:2017; Aenderung A100 | |
| Korrosion von Metallen und Legierungen - Bewertung der Lochkorrosion (ISO 11463:1995); Deutsche Fassung EN ISO 11463:2008 | |
| Korrosion von Metallen und Legierungen - Einteilung der Korrosivitaet in Raeumen mit geringer Korrosivitaet - Teil 1: Bestimmung und Abschaetzung der Korrosivitaet in Raeumen (ISO 11844-1:2006); Deutsche Fassung EN ISO... | |
| Korrosion von Metallen und Legierungen - Einteilung der Korrosivitaet in Raeumen mit geringer Korrosivitaet - Teil 2: Bestimmung der korrosiven Belastung in Raeumen (ISO 11844-2:2005); Deutsche Fassung EN ISO 11844-2:2008... | |
| Korrosion von Metallen und Legierungen - Pruefung der Schwingungskorrosion - Teil 1: Pruefung unter Anwendung von Bruch-Schwingspielen (ISO 11782-1:1998); Deutsche Fassung EN ISO 11782-1:2008 | |
| Korrosion von Metallen und Legierungen - Pruefung der Schwingungskorrosion - Teil 2: Rissausbreitungsprue fung an angerissenen Proben (ISO 11782-2:1998); Deutsche Fassung EN ISO 11782-2:2008 | |
| Korrosion von Metallen und Legierungen - Richtlinien fuer die Auslagerung von Metallen und Legierungen in oberflaechennahem Meerwasser und fuer die Auswertung (ISO 11306:1998); Deutsche Fassung EN ISO 11306:1998 | |
| Kosmetische Mittel - Mikrobiologie - Bewertung des antimikrobiellen Schutzes eines kosmetischen Produktes (ISO 11930:2012, korrigierte Fassung 2013-05-01); Deutsche Fassung EN ISO 11930:2012 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten Abwasserdruckleitung en - Teil 3: Close-Fit-Lining (ISO 11297-3:2013); Deutsche Fassung EN ISO 11297-3:2013 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten drucklosen Entwaesserungsnetzen (Freispiegelleitunge n) - Teil 1: Allgemeines (ISO 11296-1:2009); Deutsche Fassung EN ISO 11296-1:2011 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten drucklosen Entwaesserungsnetzen (Freispiegelleitunge n) - Teil 2: Rohrstrang-Lining (ISO 11296-2:2018); Deutsche Fassung EN ISO 11296-2:2018 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten drucklosen Entwaesserungsnetzen (Freispiegelleitunge n) - Teil 3: Close-Fit-Lining (ISO 11296-3:2009+Cor.1:2 011); Deutsche Fassung EN ISO 11296-3:2011 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten drucklosen Entwaesserungsnetzen (Freispiegelleitunge n) - Teil 4: Vor Ort haertendes Schlauch-Lining (ISO 11296-4:2009, korrigierte Fassung 2010-06-01); Deutsche Fassung EN ISO 11296-4:2011 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten drucklosen Entwaesserungsnetzen (Freispiegelleitunge n) - Teil 7: Wickelrohr-Lining (ISO 11296-7:2011); Deutsche Fassung EN ISO 11296-7:2013 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten Gasversorgungsnetzwe rken - Teil 2: Rohrstrang-Lining (ISO 11299-2:2018); Deutsche Fassung EN ISO 11299-2:2018 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten Gasversorgungsnetzwe rken - Teil 3: Close-Fit-Lining (ISO 11299-3:2011); Deutsche Fassung EN ISO 11299-3:2013 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten Wasserversorgungsnet zen - Teil 3: Close-Fit-Lining (ISO 11298-3:2010); Deutsche Fassung EN ISO 11298-3:2011 | |
| Kunststoff-Rohrleitu ngssysteme fuer die Renovierung von erdverlegten Wasserversorgungsnet zen - Teil 4: Vor Ort haertendes Schlauch-Lining (ISO 11298-4:2021); Deutsche Fassung EN ISO 11298-4:2021 | |
| Kunststoffe - Bestimmung der Schmelze-Massefliess rate (MFR) und der Schmelze-Volumenflie ssrate (MVR) von Thermoplasten - Teil 1: Allgemeines Pruefverfahren (ISO 1133-1:2011); Deutsche Fassung EN ISO 1133-1:2011 | |
| Kunststoffe - Bestimmung der Schmelze-Massefliess rate (MFR) und der Schmelze-Volumenflie ssrate (MVR) von Thermoplasten - Teil 2: Verfahren fuer Materialien, die empfindlich gegen eine zeit- bzw. temperaturabhaengige Vorgeschichte und/oder Feuchte... | |
| Kunststoffe - Dynamische Differenz-Thermoanal yse (DSC) - Teil 2: Bestimmung der Glasuebergangstemper atur und der Glasuebergangsstufen hoehe (ISO 11357-2:2013), Deutsche Fassung EN ISO 11357-2:2014 | |
| Kunststoffe - Dynamische Differenz-Thermoanal yse (DSC) - Teil 6: Bestimmung der Oxidations-Induktion szeit (isothermische OIT) und Oxidations-Induktion stemperatur (dynamische OIT) (ISO 11357-6:2008); Deutsche Fassung EN ISO 11357-6:2013 | |
| Kunststoffe - Dynamische Differenz-Thermoanal yse (DSC) - Teil 8: Bestimmung der Waermeleitfaehigkeit (ISO/DIS 11357-8:2019); Deutsche und Englische Fassung prEN ISO 11357-8:2019 | |
| Kunststoffe - Dynamische Differenzkalorimetri e (DSC) - Teil 6: Bestimmung der Oxidations-Induktion szeit (isothermische OIT) und Oxidations-Induktion stemperatur (dynamische OIT) (ISO/DIS 11357-6:2024); Deutsche und Englische Fassung prEN ISO 11357-6:2024 | |
| Kunststoffe - Ermittlung und Darstellung von vergleichbaren Vielpunkt-Kennwerten - Teil 1: Mechanische Eigenschaften (ISO 11403-1:2001); Deutsche Fassung EN ISO 11403-1:2003 | |
| Kunststoffe - Folien und Bahnen - Bestimmung des Blockwiderstandes (ISO 11502:2018); Deutsche Fassung EN ISO 11502:2018 | |
| Kunststoffe - Haertbare Formmassen - Beurteilung der Kurzzeit-Leistungsfa ehigkeit bei erhoehten Temperaturen (ISO 11248:1993); Deutsche Fassung EN ISO 11248:1999 | |
| Kunststoffe - Herstellung von Polyvinylchlorid (PVC)-Pasten fuer Pruefzwecke - Dissolver-Verfahren (ISO 11468:1997); Deutsche Fassung EN ISO 11468:1999 | |
| Kunststoffe - Phenolharze - Bestimmung der Reaktionswaermen und -temperaturen durch dynamische Differenzkalorimetri e (ISO 11409:1993); Deutsche Fassung EN ISO 11409:1998 | |
| Kunststoffe - Phenolharze - Trennung durch Fluessigchromatograp hie (ISO 11401:1993); Deutsche Fassung EN ISO 11401:1998 | |
| Kunststoffe - Phenoplast-Formteile - Bestimmung der freien Phenole; Iodometrisches Verfahren (ISO 119:1977); Deutsche Fassung EN ISO 119:1998 | |
| Kunststoffe - Phenoplast-Formteile - Bestimmung von freiem Ammoniak und Ammoniumverbindungen ; Colorimetrisches Vergleichsverfahren (ISO 120:1977); Deutsche Fassung EN ISO 120:1998 | |
| Kunststoffe - Poly(methylmethacryl at) Stegdoppel- und Stegdreifachplatten - Pruefverfahren (ISO 12017:1995); Deutsche Fassung EN ISO 12017:1996 | |
| Kunststoffe - Polyamide - Gaschromatographisch e Bestimmung von e-Caprolactam und ?-Laurolactam (ISO 11337:2004); Deutsche Fassung EN ISO 11337:2004, Berichtigung zu DIN EN ISO 11337:2004-09; Deutsche Fassung EN ISO 11337:2004/AC:2009 | |
| Kunststoffe - Polyamide - Gaschromatographisch e Bestimmung von e-Caprolactam und ?-Laurolactam (ISO 11337:2004); Deutsche Fassung EN ISO 11337:2004 | |
| Kunststoffe - Tafeln aus Polycarbonat - Lieferformen, Abmessungen und charakteristische Eigenschaften (ISO 11963:1995); Deutsche Fassung EN ISO 11963:1995 | |
| Kunststoffe - Ultrahochmolekulare Polyethylen (PE-UHMW)-Formmassen - Teil 2: Herstellung von Probekoerpern und Bestimmung von Eigenschaften (ISO 11542-2:1998 + Cor. 1:2007); Deutsche Fassung EN ISO 11542-2:1998 + AC:2008 | |
| Kunststoffe - Verfahren zur Bestimmung der Dichte von nicht verschaeumten Kunststoffen - Teil 2: Verfahren mit Dichtegradientensaeu le (ISO 1183-2:2004); Deutsche Fassung EN ISO 1183-2:2004 | |
| Kunststoffe - Verfahren zur Bestimmung der Dichte von nicht verschaeumten Kunststoffen - Teil 2: Verfahren mit Dichtegradientensaeu le (ISO/DIS 1183-2:2025); Deutsche und Englische Fassung prEN ISO 1183-2:2025 | |
| Kunststoffe - Weichmacherfreie Polyvinylchlorid (PVC-U)-Formmassen - Teil 1: Bezeichnungssystem und Basis fuer Spezifikationen (ISO 1163-1:1995); Deutsche Fassung EN ISO 1163-1:1999 | |
| Kunststoffe - Weichmacherfreie Polyvinylchlorid (PVC-U)-Formmassen - Teil 2: Herstellung von Probekoerpern und Bestimmung von Eigenschaften (ISO 1163-2:1995); Deutsche Fassung EN ISO 1163-2:1999 | |
| Kunststoffe - Weichmacherfreie Polyvinylchloridtafe ln - Typen, Masse und Eigenschaften - Teil 1: Tafeln mit einer Dicke von mindestens 1 mm (ISO 11833-1:2007); Deutsche Fassung EN ISO 11833-1:2007 | |
| Land- und Forstmaschinen - Tragbare handgefuehrte Freischneider und Trimmer mit Antrieb durch Verbrennungsmotor - Sicherheit (ISO 11806:1997); Deutsche Fassung EN ISO 11806:2008 | |
| Land- und forstwirtschaftliche Maschinen - Sicherheitstechnisch e Anforderungen und Pruefung fuer tragbare handgehaltene motorbetriebene Freischneider und Grastrimmer - Teil 1: Maschinen mit Antrieb durch integrierten Verbrennungsmotor (ISO 11806-1:2011); Deutsche | |
| Laser und Laseranlagen - Bestimmung der laserinduzierten Zerstoerschwelle optischer Oberflaechen - Teil 1: 1-auf-1 Pruefung (ISO 11254-1:2000); Deutsche Fassung EN ISO 11254-1:2000 | |
| Laser und Laseranlagen - Bestimmung der laserinduzierten Zerstoerschwelle optischer Oberflaechen - Teil 2: S-auf-1-Pruefung (ISO 11254-2:2001); Deutsche Fassung EN ISO 11254-2:2001 | |
| Laser und Laseranlagen - Bestimmung der Laserresistenz von Trachealtuben - Teil 2: Trachealtubusmansche tten (ISO 11990-2:2010); Deutsche Fassung EN ISO 11990-2:2010 | |
| Laser und Laseranlagen - Bestimmung der Laserresistenz von Trachealtubusschaft und Trachealtubusmansche tte (ISO/DIS 11990:2025); Deutsche und Englische Fassung prEN ISO 11990:2025 | |
| Laser und Laseranlagen - Lasergeraet - Mindestanforderungen an die Dokumentation (ISO 11252:2004); Deutsche Fassung EN ISO 11252:2008 | |
| Laser und Laseranlagen - Pruefverfahren fuer Laserstrahlparameter - Polarisation (ISO 12005:2003); Deutsche Fassung EN ISO 12005:2003 | |
| Laser und Laseranlagen - Pruefverfahren fuer Laserstrahlparameter - Strahllagestabilitae t (ISO 11670:2003); Deutsche Fassung EN ISO 11670:2003 | |
| Laser und Laseranlagen - Pruefverfahren fuer Laserstrahlparameter - Strahllagestabilitae t (ISO/DIS 11670:2025); Deutsche und Englische Fassung prEN ISO 11670:2025 | |
| Laser und Laseranlagen - Pruefverfahren und Einstufung zur Laserresistenz von Operationstuechern und/oder anderen Abdeckungen zum Schutz des Patienten - Teil 2: Sekundaere Entzuendung (ISO 11810-2:2007); Deutsche Fassung EN ISO 11810-2:2009... | |
| Lasers and laser-related equipment - Determination of laser resistance of tracheal tubes - Part 1: Tracheal tube shaft (ISO 11990-1:2011) | |
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3: Assurance of laser power (energy) handling capabilities (ISO 11254-3:2006) | |
| Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Part 1: Primary ignition and penetration (ISO 11810-1:2005) | |
| Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO... | |
| Leather - Tests for colour fastness - Colour fastness of small samples to solvents (ISO 11643:2009) | |
| Leather - Tests for colour fastness - Colour fastness to perspiration (ISO 11641:2012) | |
| Leather - Tests for colour fastness - Colour fastness to perspiration (ISO/DIS 11641:2024); German and English version prEN ISO 11641:2024 | |
| Leder - Bestimmung des Gesamtgehalts von einzelnen Bisphenolen (ISO/DIS 11936:2022); Deutsche und Englische Fassung prEN ISO 11936:2022 | |
| Leder - Farbechtheitspruefun gen - Bestimmung der Reibechtheit von Faerbungen (ISO 11640:2012); Deutsche Fassung EN ISO 11640:2012 | |
| Leder - Farbechtheitspruefun gen - Farbechtheit gegenueber Wasser (ISO 11642:1993); Deutsche Fassung EN ISO 11642:1998 | |
| Leder - Farbechtheitspruefun gen - Farbechtheit gegenueber Wasser (ISO/DIS 11642:2024); Deutsche und Englische Fassung prEN ISO 11642:2024 | |
| Leder - Flaechenmessung (ISO 11646:2014); Deutsche Fassung EN ISO 11646:2014 | |
| Leder - Pruefung der Haftfestigkeit von Zurichtungen (ISO 11644:2009); Deutsche Fassung EN ISO 11644:2009 | |
| Leitungsanschluesse fuer allgemeine Anwendung und Fluidtechnik - Einschraubloecher und Einschraubzapfen mit Gewinde nach ISO 228-1 und Elastomerdichtung oder metallener Dichtkante - Teil 2: Einschraubzapfen mit Elastomerdichtung (Form E), schwere (S)... | |
| Luftbeschaffenheit - Ermittlung von zeitlich gemittelten Massenemissionen und Emissionsfaktoren - Allgemeine Vorgehensweise (ISO 11771:2010); Deutsche Fassung EN ISO 11771:2010 | |
| Luftfahrt-Bodengerae te - Grafische Symbole (ISO 11532:2018); Deutsche und Englische Fassung EN ISO 11532:2020 | |
| Manipulating industrial robots - Automatic and effector exchange systems - Vocabulary and presentation of characteristics (ISO 11593:1996) | |
| Medical electrical equipment - Clinical performance evaluation of clinical thermometers (ISO/DIS 12487:2024); German and English version prEN ISO 12487:2024 | |
| Medizinische Informatik - Identifikation von Arzneimitteln - Datenelemente und -strukturen zur Identifikation und zum Austausch von pharmazeutischen Produktkennzeichen (ISO 11616:2012); Deutsche Fassung EN ISO 11616:2012 | |
| Medizinische Informatik - Identifikation von Arzneimitteln - Datenelemente und -strukturen zur Identifikation von Arzneimitteln fuer den Austausch von behoerdlich genehmigten Arzneimittelinformat ionen (ISO 11615:2012); Deutsche Fassung EN ISO 11615:2012 | |
| Medizinische Informatik - Identifikation von Arzneimitteln - Datenelemente und Strukturen zur eindeutigen Identifikation und zum Austausch von vorgeschriebenen Arzneimittelinformat ionen (ISO/DIS 11615:2025); Deutsche und Englische Fassung prEN ISO 11615:2025 | |
| Metallische Werkstoffe - Bleche und Baender - Bestimmung der Grenzformaenderungsk urve - Teil 1: Messung und Anwendung von Grenzformaenderungsd iagrammen in Stanzereien (ISO 12004-1:2008); Deutsche Fassung EN ISO 12004-1:2008 | |
| Metallische Werkstoffe - Bleche und Baender - Bestimmung der Grenzformaenderungsk urve - Teil 2: Bestimmung von Grenzformaenderungsk urven im Labor (ISO 12004-2:2008); Deutsche Fassung EN ISO 12004-2:2008 | |
| Methods for determining the density of non-cellular plastics - Part 3: Gas pyknometer method (ISO 1183-3:1999); English version of DIN EN ISO 1183-3 | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 1: Detection method (ISO 11290-1:2017) | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 1: Detection method - Amendment 1: Inclusion of... | |
| Mikrobiologie der Lebensmittelkette - Horizontales Verfahren fuer den Nachweis und die Zaehlung von Listeria monocytogenes und von Listeria spp. - Teil 2: Zaehlverfahren (ISO 11290-2:2017); Deutsche Fassung EN ISO 11290-2:2017... | |
| Mikrobiologie der Lebensmittelkette - Horizontales Verfahren fuer den Nachweis und die Zaehlung von Listeria monocytogenes und von Listeria spp. - Teil 2: Zaehlverfahren - Aenderung 1: Aufnahme der Lagerung der... | |
| Milch - Bestimmung des Fettgehaltes - Gravimetrisches Verfahren (Referenzverfahren) (ISO 1211:2010); Deutsche Fassung EN ISO 1211:2010 | |
| Milch und Milchprodukte - Bestimmung der Aktivitaet der alkalischen Phosphatase - Teil 2: Fluorimetrisches Verfahren fuer Kaese (ISO/DIS 11816-2:2022); Deutsche und Englische Fassung prEN ISO 11816-2:2022 | |
| Milk and milk products - Determination of alkaline phosphatase activity - Part 1: Fluorimetric method for milk and milk-based drinks (ISO 11816-1:2006) | |
| Milk and milk products - Determination of alkaline phosphatase activity - Part 2: Fluorometric method for cheese (ISO 11816-2:2003) | |
| Mineraloelerzeugniss e - Bestimmung der Oxidationsbestaendig keit von Mitteldestillaten (ISO 12205:1995); Deutsche Fassung EN ISO 12205:1996 | |
| Modified starch - Determination of hydroxypropyl content - Method using proton nuclear magnetic resonance (NMR) spectrometry (ISO 11543:2000) | |
| Molecular biomarker analysis - General guidelines for single-laboratory validation of qualitative real-time PCR methods (ISO/DIS 11781:2023); German and English version prEN ISO 11781:2023 | |
| Molecular biomarker analysis - Requirements and guidance for single-laboratory validation of qualitative real-time polymerase chain reaction (PCR) methods (ISO 11781:2025) | |
| Motorgetriebene kleine Wasserfahrzeuge - Sichtfeld vom Steuerstand (ISO 11591:2000); Deutsche Fassung EN ISO 11591:2000 | |
| Natural gas - Calculation of compression factor - Part 3: Calculation using physical properties (ISO 12213-3:2006) | |
| Natural gas - Determination of water content at high pressure (ISO 11541:1997) | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems - AMENDMENT 1 (ISO 11608-1:2022/DAM 1:2025); German and English version EN ISO 11608-1:2022/prA1:20... | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 3: Containers and integrated fluid paths - Amendment 1 (ISO 11608-3:2022/DAM 1:2025); German and English version EN... | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO 11608-5:2012) | |
| Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment (ISO 11608-7:2016) | |
| Nichtrostende Stahlrohre - Masse, Grenzabmasse und laengenbezogene Masse (ISO 1127:1992); Deutsche Fassung EN ISO 1127:1996 | |
| Non-destructive testing - Industrial radiographic films - Part 2: Control of film processing by means of reference values (ISO 11699-2:1998) | |
| Nuclear fuel technology - Controlled-potential coulometric assay of plutonium (ISO 12183:2016) | |
| Ophthalmic implants - Intraocular lenses - Optical properties and test methods (ISO 11979-2:1999); Corrigenda to DIN EN ISO 11979-2:2000-07 | |
| Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses (ISO 11979-10:2006) | |
| Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:2006) | |
| Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO/DIS 11979-1:2024); German and English version prEN ISO 11979-1:2024 | |
| Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO 11979-2:1999); English version of DIN EN ISO 11979-2 | |
| Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2006) | |
| Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO 11979-7:2006) | |
| Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses (ISO 11979-9:2006) | |
| Ophthalmic optics - Contact lenses - Determination of shelf-life (ISO/DIS 11987:2025); German and English version prEN ISO 11987:2025 | |
| Ophthalmische Implantate - Intraokularlinsen - Teil 4: Etikettierung und Information (ISO 11979-4:2008); Deutsche Fassung EN ISO 11979-4:2008 | |
| Ophthalmische Implantate - Intraokularlinsen - Teil 4: Etikettierung und Information (ISO/DIS 11979-4:2024); Deutsche und Englische Fassung prEN ISO 11979-4:2024 | |
| Ophthalmische Implantate - Intraokularlinsen - Teil 5: Biokompatibilitaet (ISO 11979-5:2006); Deutsche Fassung EN ISO 11979-5:2006 | |
| Ophthalmische Implantate - Intraokularlinsen - Teil 6: Haltbarkeits- und Transportpruefungen (ISO 11979-6:2007); Deutsche Fassung EN ISO 11979-6:2007 | |
| Ophthalmische Implantate - Intraokularlinsen - Teil 7: Klinische Pruefungen von Intraokularlinsen fuer die Korrektion von Aphakie (ISO/DIS 11979-7:2017), Deutsche und Englische Fassung prEN ISO 11979-7:2017 | |
| Ophthalmische Implantate - Intraokularlinsen - Teil 8: Grundlegende Anforderungen (ISO 11979-8:2006); Deutsche Fassung EN ISO 11979-8:2009 | |
| Optics and photonics - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO 11551:2019, Corrected version 2020-01) | |
| Optics and photonics - Lasers and laser-related equipment - Test method for absorptance of optical laser components (ISO/DIS 11551:2025); German and English version prEN ISO 11551:2025 | |
| Optik und optische Instrumente - Augenoptik - Formscheiben (ISO 11380:1994); Deutsche Fassung EN ISO 11380:1996 | |
| Optik und optische Instrumente - Augenoptik - Schraubgewinde (ISO 11381:1994); Deutsche Fassung EN ISO 11381:1996 | |
| Optik und optische Instrumente - Laser und Laseranlagen - Bestimmung der Laserresistenz des Schaftes von Trachealtuben (ISO 11990:2003); Deutsche Fassung EN ISO 11990:2003 | |
| Optik und Photonik - Laser und Laseranlagen - Pruefverfahren fuer Leistung, Energie und Kenngroessen des Zeitverhaltens von Laserstrahlen (ISO 11554:2006); Deutsche Fassung EN ISO 11554:2008 | |
| Optik und Photonik - Laser und Laseranlagen - Pruefverfahren fuer Leistung, Energie und Kenngroessen des Zeitverhaltens von Laserstrahlen (ISO/DIS 11554:2023); Deutsche und Englische Fassung prEN ISO 11554:2023 | |
| Outlet connections for gas cylinder valves for compressed breathable air - Part 1: Yoke type connections (ISO 12209-1:2000); English version of DIN EN ISO 12209-1 | |
| Outlet connections for gas cylinder valves for compressed breathable air - Part 2: Threaded connections (ISO 12209-2:2000); English version of DIN EN ISO 12209-2 | |
| Outlet connections for gas cylinder valves for compressed breathable air - Part 3: Adapter for 230 bar valves (ISO 12209-3:2000); English version of DIN EN ISO 12209-3 | |
| Packaging - Complete, filled transport packages - Compression and stacking tests using a compression tester (ISO 12048:1994); English version of DIN EN ISO 12048 | |
| Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006) | |
| Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2019) | |
| Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2019) | |
| Paints and varnishes - Determination of mar resistance (ISO 12137:2011) | |
| Paints and varnishes - Determination of mar resistance - Part 1: Method using a curved stylus (ISO 12137-1:1997, including Technical Corrigendum 1:1998) | |
| Paints and varnishes - Determination of mar resistance - Part 2: Method using a pointed stylus (ISO 12137-2:1997) | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humid (ISO/DIS 11997-1:2025); German and English version prEN ISO 11997-1:2025 | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 1: Wet (salt fog)/dry/humidity (ISO 11997-1:2005) | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 2: Wet (salt fog)/dry/humidity/UV light (ISO 11997-2:2000) | |
| Paints and varnishes - Determination of resistance to cyclic corrosion conditions - Part 3: Testing of coating systems on materials and components in automotive construction (ISO 11997-3:2022) | |
| Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) | |
| Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 2: Gas-chromatographic method (ISO 11890-2:2006) | |
| Paints and varnishes - Exposure of coatings to artificial weathering - Exposure to fluorescent UV lamps and water (ISO 11507:2007) | |
| Pen-injectors for medical use - Part 1: Pen-injectors; Requirements and test methods (ISO 11608-1:2000); English version of DIN EN ISO 11608-1 | |
| Pen-injectors for medical use - Part 2: Needles; Requirements and test methods (ISO 11608-2:2000); English version of DIN EN ISO 11608-2 | |
| Pen-injectors for medical use - Part 3: Finished cartridges; Requirements and test methods (ISO 11608-3:2000); English version of DIN EN ISO 11608-3 | |
| Pen-Injektoren zur medizinischen Anwendung - Teil 4: Anforderungen an und Pruefverfahren fuer elektronische und elektromechanische Pen-Injektoren (ISO 11608-4:2006); Deutsche Fassung EN ISO 11608-4:2007 | |
| Persoenliche Auftriebsmittel - Teil 2: Rettungswesten, Stufe 275 - Sicherheitstechnisch e Anforderungen - Aenderung 1 (ISO 12402-2:2006/Amd 1:2010); Deutsche Fassung EN ISO 12402-2:2006/A1:2010 | |
| Persoenliche Auftriebsmittel - Teil 3: Rettungswesten, Stufe 150 - Sicherheitstechnisch e Anforderungen (ISO 12402-3:2006); Deutsche Fassung EN ISO 12402-3:2006 | |
| Persoenliche Auftriebsmittel - Teil 3: Rettungswesten, Stufe 150 - Sicherheitstechnisch e Anforderungen - Aenderung 1 (ISO 12402-3:2006/Amd 1:2010); Deutsche Fassung EN ISO 12402-3:2006/A1:2010 | |
| Persoenliche Auftriebsmittel - Teil 5: Schwimmhilfen (Stufe 50) - Sicherheitstechnisch e Anforderungen (ISO 12402-5:2006); Deutsche Fassung EN ISO 12402-5:2006 | |
| Persoenliche Auftriebsmittel - Teil 5: Schwimmhilfen (Stufe 50) - Sicherheitstechnisch e Anforderungen - Aenderung 1 (ISO 12402-5:2006/Amd 1:2010); Deutsche Fassung EN ISO 12402-5:2006/A1:2010 | |
| Persoenliche Auftriebsmittel - Teil 7: Werkstoffe und Bestandteile - Sicherheitstechnisch e Anforderungen und Pruefverfahren (ISO 12402-7:2006); Deutsche Fassung EN ISO 12402-7:2006, Berichtigung zu DIN EN ISO 12402-7:2007-03 | |
| Persoenliche Auftriebsmittel - Teil 7: Werkstoffe und Bestandteile - Sicherheitstechnisch e Anforderungen und Pruefverfahren - Aenderung 1 (ISO 12402-7:2006/Amd.1:2 011); Deutsche Fassung EN ISO 12402-7:2006/A1:2011 , Berichtigung zu DIN EN... | |
| Persoenliche Auftriebsmittel - Teil 8: Zubehoerteile - Sicherheitstechnisch e Anforderungen und Pruefverfahren - Aenderung 1 (ISO 12402-8:2006/Amd.1:2 011); Deutsche Fassung EN ISO 12402-8:2006/A1:2011 | |
| Persoenliche Auftriebsmittel - Teil 9: Pruefverfahren - Aenderung 1 (ISO 12402-9:2006/Amd.1:2 011); Deutsche Fassung EN ISO 12402-9:2006/A1:2011 | |
| Persoenliche Schutzausruestung - Pruefverfahren fuer Sonnenbrillen und aehnlichen Augenschutz (ISO 12311:2013); Deutsche Fassung EN ISO 12311:2013 | |
| Personal flotation devices - Part 10: Selection and application of personal flotation devices and other relevant devices (ISO 12402-10:2006) | |
| Personal flotation devices - Part 2: Lifejackets, performance level 275 - Safety requirements (ISO 12402-2:2006) | |
| Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety requirements (ISO 12402-4:2006) | |
| Personal flotation devices - Part 4: Lifejackets, performance level 100 - Safety requirements - Amendment 1 (ISO 12402-4:2006/Amd 1:2010) | |
| Personal flotation devices - Part 5: Buoyancy aids (level 50) - Safety requirements (ISO 12402-5:2006); Corrigendum 1 to English translation of DIN EN ISO 12402-5:2006-12 | |
| Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods (ISO 12402-6:2006) | |
| Personal flotation devices - Part 6: Special purpose lifejackets and buoyancy aids - Safety requirements and additional test methods - Amendment 1 (ISO 12402-6:2006/Amd 1:2010) | |
| Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (ISO 12402-7:2006) | |
| Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods - Amendment 1 (ISO 12402-7:2006/Amd 1:2011) | |
| Personal flotation devices - Part 8: Accessories - Safety requirements and test methods (ISO 12402-8:2006) | |
| Personal flotation devices - Part 9: Test methods (ISO 12402-9:2006) | |
| Petroleum, petrochemical and natural gas industries - Hairpin-type heat exchangers (ISO 12212:2012); English version EN ISO 12212:2012 | |
| Phenolic, amino and condensation resins - Determination of free-formaldehyde content (ISO 11402:2004) Corrigendum 1 to English version of DIN EN ISO 11402:2005-09 | |
| Piping systems for rehabilitation of underground drains, sewers and water supply networks - Part 1: Polyethylene (PE) material (ISO/DIS 11300-1:2025); German and English version prEN ISO 11300-1:2025 | |
| Piping systems for rehabilitation of underground gas supply networks - Part 1: Polyethylene (PE) material (ISO/DIS 11301-1:2025); German and English version prEN ISO 11301-1:2025 | |
| Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012) | |
| Plastics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties (ISO 11403-3:1999); English version of DIN EN ISO 11403-3 | |
| Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) | |
| Plastics - Determination of viscosity using a falling-ball viscometer - Part 1: Inclined-tube method (ISO 12058-1:1997) | |
| Plastics - Differential scanning calorimetry (DSC) - Part 1: General principles (ISO 11357-1:2009) | |
| Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO 11357-3:2011) | |
| Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization (ISO/DIS 11357-3:2024); German and English version prEN ISO 11357-3:2024 | |
| Plastics - Differential scanning calorimetry (DSC) - Part 4: Determination of specific heat capacity (ISO 11357-4:2005) | |
| Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO 11357-5:2013) | |
| Plastics - Differential scanning calorimetry (DSC) - Part 5: Determination of characteristic reaction-curve temperatures and times, enthalpy of reaction and degree of conversion (ISO/DIS 11357-5:2024); German and English version prEN... | |
| Plastics - Differential scanning calorimetry (DSC) - Part 7: Determination of crystallization kinetics (ISO 11357-7:2002) | |
| Plastics - Differential scanning calorimetry (DSC) - Part 8: Determination of thermal conductivity (ISO 11357-8:2021) | |
| Plastics - Film and sheeting - Determination of dimensional change on heating (ISO 11501:1995) | |
| Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 12086-1:2006) | |
| Plastics - Fluoropolymer dispersions and moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 12086-2:2006) | |
| Plastics - Generic identification and marking of plastics products (ISO 11469:2000); English version of DIN EN ISO 11469 | |
| Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pycnometer method and titration method (ISO/DIS 1183-1:2024); German and English version prEN ISO 1183-1:2024... | |
| Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) | |
| Plastics - Thermogravimetry (TG) of polymers - General principles (ISO 11358:1997) | |
| Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles (ISO 11358-1:2014) | |
| Plastics - Unplasticized poly(vinyl chloride) sheets - Types, dimensions and characteristics - Part 2: Sheets of thickness less than 1 mm (ISO 11833-2:1998) | |
| Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO 1158:1998); German version EN ISO 1158:1998 | |
| Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content (ISO/DIS 1158:2025); German and English version prEN ISO 1158:2025 | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2013) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018) | |
| Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2011) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022) | |
| Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2010) | |
| Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018) | |
| Protective clothing - Clothing to protect against heat and flame (ISO 11612:2008) | |
| Protective clothing - Clothing to protect against heat and flame - Minimum performance requirements (ISO/DIS 11612.2:2024); German and English version prEN ISO 11612:2024 | |
| Protective clothing for use in welding and allied processes (ISO 11611:2007) | |
| Protective clothing for users of hand-held chain-saws - Part 4: Performance requirements and test methods for protective gloves (ISO 11393-4:2018) | |
| Protective clothing for users of hand-held chainsaws - Part 1: Test rig for testing resistance to cutting by a chainsaw (ISO 11393-1:2018) | |
| Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors (ISO 11393-2:2018) | |
| Protective clothing for users of hand-held chainsaws - Part 3: Test methods for footwear (ISO 11393-3:2018) | |
| Quality of dialysis fluid for haemodialysis and related therapies (ISO 11663:2014) | |
| Reaction to fire tests - Ignitability of products subjected to direct impingement of flame - Part 2: Single-flame source test (ISO/DIS 11925-2:2024); German and English version prEN ISO 11925-2:2024 | |
| Reaction to fire tests for building products - Part 2: Ignitability when subjected to direct impingement of flame (ISO 11925-2:2002) | |
| Reaction to fire tests for products - Non-combustibility test (ISO 1182:2010) | |
| Recommended practice for the design of low-noise machinery and equipment - Part 2: Introduction to the physics of low-noise design (ISO/TR 11688-2:1998); English version of DIN EN ISO 11688-2 | |
| Resilient floor coverings - Heterogeneous poly(vinyl chloride) flooring on foam - Specification (ISO 11638:2020, including corrected version 2021-09) | |
| Rice - Determination of biometric characteristics of kernels (ISO 11746:2012) | |
| Rice - Determination of rice kernel resistance to extrusion after cooking (ISO 11747:2012) | |
| Rohrleitungssysteme aus Kunststoff fuer die Sanierung von Rohrleitungen - Klassifizierung und Ueberblick ueber strategische, taktische und operative Aktivitaeten (ISO/DIS 11295:2025); Deutsche und Englische Fassung prEN ISO 11295:2025 | |
| Rohrleitungssysteme fuer die Sanierung von unterirdischen Entwaesserungs-, Kanalisations- und Wasserversorgungsnet zen - Teil 2: Duroplastische Komposite (ISO/DIS 11300-2:2025); Deutsche und Englische Fassung prEN ISO 11300-2:2025 | |
| Rohrleitungssysteme fuer die Sanierung von unterirdischen Entwaesserungs-, Kanalisations- und Wasserversorgungsnet zen - Teil 3: Weichmacherfreies Poly(vinylchlorid) (PVC-U) (ISO/DIS 11300-3:2025); Deutsche und Englische Fassung prEN ISO 11300-3:2025 | |
| Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO 11553-2:2007) | |
| Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held or hand-operated laser processing machines (ISO/DIS 11553-2:2025); German and English version prEN ISO 11553-2:2025 | |
| Safety of machinery - Laser processing machines - Part 3: Noise reduction and noise measurement methods for laser processing machines and hand-held processing devices and associated auxiliary equipment (accuracy grade... | |
| Schiffe und Meerestechnik - Selbststeueranlagen (ISO 11674:2000); Deutsche Fassung EN ISO 11674:2001 | |
| Schlamm, behandelter Bioabfall, Boden und Abfall - Bestimmung des Trockenrueckstands oder des Wassergehalts und Berechnung des Trockenmassenanteils auf Grundlage der Masse (ISO/DIS 11465:2024); Deutsche und Englische Fassung prEN ISO 11465:2024... | |
| Schmuck - Bestimmung von Platin in Platinschmucklegieru ngen - ICP-OES-Verfahren unter Verwendung von Yttrium als Internem Standardelement (ISO 11494:2014); Deutsche Fassung EN ISO 11494:2016 | |
| Schutzkleidung fuer die Benutzer von handgefuehrten Kettensaegen - Teil 5: Pruefverfahren und Leistungsanforderung en fuer Schutzgamaschen (ISO 11393-5:2018); Deutsche Fassung EN ISO 11393-5:2019 | |
| Schutzkleidung fuer die Benutzer von handgefuehrten Kettensaegen - Teil 6: Pruefverfahren und Leistungsanforderung en fuer Oberkoerperschutzmit tel (ISO 11393-6:2018, korrigierte Fassung 2019-11); Deutsche Fassung EN ISO 11393-6:2019 | |
| Schutzkleidung gegen Hitze und Flammen - Bestimmung des Kontaktwaermedurchga ngs durch Schutzkleidung oder -materialien - Teil 2: Pruefverfahren, bei dem Kontaktwaerme erzeugt wird durch kleine fallende Zylinder (ISO 12127-2:2007); Deutsche... | |
| Schweisszusaetze - Fuelldrahtelektroden zum Metall-Lichtbogensch weissen mit und ohne Gasschutz von Nickel und Nickellegierungen - Einteilung (ISO 12153:2011); Deutsche Fassung EN ISO 12153:2012 | |
| Ships and marine technology - Marine electromagnetic compasses (ISO 11606:2000); English version of DIN EN ISO 11606 | |
| Sicherheit von Maschinen - Allgemeine Gestaltungsleitsaetz e - Risikobeurteilung und Risikominderung (ISO 12100:2010); Deutsche Fassung EN ISO 12100:2010, Berichtigung zu DIN EN ISO 12100:2011-03 | |
| Sicherheit von Maschinen - Allgemeine Gestaltungsleitsaetz e - Risikobeurteilung und Risikominderung (ISO 12100:2010); Deutsche Fassung EN ISO 12100:2010 | |
| Sicherheit von Maschinen - Allgemeine Gestaltungsleitsaetz e - Risikobeurteilung und Risikominderung (ISO/DIS 12100:2024); Deutsche und Englische Fassung prEN ISO 12100:2024 | |
| Sicherheit von Maschinen - Grundbegriffe, allgemeine Gestaltungsleitsaetz e - Teil 1: Grundsaetzliche Terminologie, Methodologie (ISO 12100-1:2003); Deutsche Fassung EN ISO 12100-1:2003 | |
| Sicherheit von Maschinen - Grundbegriffe, allgemeine Gestaltungsleitsaetz e - Teil 1: Grundsaetzliche Terminologie, Methodologie - Aenderung 1 (ISO 12100-1:2003/Amd 1:2009); Deutsche Fassung EN ISO 12100-1:2003/A1:2009 | |
| Sicherheit von Maschinen - Grundbegriffe, allgemeine Gestaltungsleitsaetz e - Teil 2: Technische Leitsaetze (ISO 12100-2:2003); Deutsche Fassung EN ISO 12100-2:2003 | |
| Sicherheit von Maschinen - Grundbegriffe, allgemeine Gestaltungsleitsaetz e - Teil 2: Technische Leitsaetze - Aenderung 1 (ISO 12100-2:2003/Amd 1:2009); Deutsche Fassung EN ISO 12100-2:2003/A1:2009 | |
| Sicherheit von Maschinen - Laserbearbeitungsmas chinen - Teil 1: Allgemeine Sicherheitsanforderu ngen (ISO 11553-1:2005); Deutsche Fassung EN ISO 11553-1:2008 | |
| Slotted cheese head screws - Product grade A (ISO 1207:1992) | |
| Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO 12401:2009) | |
| Small craft - Deck safety harness and safety line - Safety requirements and test methods (ISO/DIS 12401:2025); German and English version prEN ISO 12401:2025 | |
| Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 1: Craft with a length of hull less than 8 m (ISO 11592-1:2016) | |
| Small craft - Determination of maximum propulsion power rating using manoeuvring speed - Part 2: Craft with a length of hull between 8 m and 24 m (ISO 11592-2:2021) | |
| Small craft - Hull construction and scantlings - Part 1: Materials: Thermosetting resins, glass-fibre reinforcement, reference laminate (ISO 12215-1:2000); English version of DIN EN ISO 12215-1 | |
| Small craft - Hull construction and scantlings - Part 2: Materials: Core materials for sandwich construction, embedded materials (ISO 12215-2:2002); English version of DIN EN ISO 12215-2 | |
| Small craft - Hull construction and scantlings - Part 3: Materials: Steel, aluminium alloys, wood, other materials (ISO 12215-3:2002); English version of DIN EN ISO 12215-3 | |
| Small craft - Hull construction and scantlings - Part 4: Workshops and manufacturing (ISO 12215-4:2002); English version of DIN EN ISO 12215-4 | |
| Small craft - Hull construction and scantlings - Part 5: Design pressures for monohulls, design stresses, scantlings determination (ISO 12215-5:2008) | |
| Small craft - Hull construction and scantlings - Part 7: Determination of loads for multihulls and of their local scantlings using ISO 12215-5 (ISO 12215-7:2020) | |
| Small craft - Hull construction and scantlings - Part 8: Rudders (ISO 12215-8:2009) | |
| Small craft - Hull construction and scantlings - Part 8: Rudders - Technical Corrigendum 1 (ISO 12215-8:2009); Corrigendum 1 to English translation of DIN EN ISO 12215-8:2009-10 (ISO 12215-8:2009/Cor. 1:2010)... | |
| Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2002 + Amd 1:2009) (enthaelt... | |
| Small craft - Stability and buoyancy assessment and categorization - Part 1: Non-sailing boats of hull length greater than or equal to 6 m (ISO 12217-1:2015) | |
| Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2002) | |
| Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO 12217-2:2015) | |
| Small craft - Stability and buoyancy assessment and categorization - Part 2: Sailing boats of hull length greater than or equal to 6 m (ISO/FDIS 12217-2:2020); German and English version... | |
| Small craft - Stability and buoyancy assessment and categorization - Part 3: Boats of hull length less than 6 m (ISO 12217-3:2002 + Amd 1:2009) (includes Amendment A1:2009) | |
| Small craft - Watertight cockpits and quick-draining cockpits (ISO 11812:2001) | |
| Small craft - Windows, portlights, hatches, deadlights and doors - Strength and watertightness requirements (ISO 12216:2022) | |
| Small craft less than 8 m length of hull - Determination of maximum propulsion power rating (ISO 11592:2001); English version of DIN EN ISO 11592 | |
| Soil quality - Assessment of impact from soil contaminated with petroleum hydrocarbons (ISO 11504:2017) | |
| Soil quality - Determination of dry bulk density (ISO 11272:1998) | |
| Soil quality - Determination of particle density (ISO 11508:1998) | |
| Soil quality - Determination of soil water content as a volume fraction using coring sleeves - Gravimetric method (ISO 11461:2001) | |
| Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012) | |
| Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + Cor 1:2009) | |
| Soil quality - Effects of pollutants on earthworms - Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei (ISO 11268-1:2012) | |
| Soil quality - Effects of pollutants on earthworms - Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei (ISO 11268-2:2012) | |
| Soil quality - Effects of pollutants on earthworms - Part 3: Guidance on the determination of effects in field situations (ISO 11268-3:2014) | |
| Solder wire, solid and flux cored - Specification and test method - Part 1: Classification and performance requirements (ISO 12224-1:1997) | |
| Solder wire, solid and flux cored - Specifications and test methods - Part 3: Wetting balance test method for flux cored solder wire efficacy (ISO 12224-3:2003) | |
| Sound absorbers for use in buildings - Rating of sound absorption (ISO 11654:1997) | |
| Specification and approval of welding procedures for production welding of steel castings (ISO 11970:2001) | |
| Specification and qualification of welding procedures for production welding of steel castings (ISO/DIS 11970:2024); German and English version prEN ISO 11970:2024 | |
| Split pins (ISO 1234:1997) | |
| Staerke und Staerkederivate - Schwermetallgehalt - Teil 4: Bestimmung des Cadmiumgehaltes durch Atomabsorptionsspekt rometrie mit elektrothermischer Atomisierung (ISO 11212-4:1997); Deutsche Fassung EN ISO 11212-4:1997 | |
| Stahl und Eisen - Bestimmung des Cobaltgehaltes - Flammenatomabsorptio nsspektrometrisches Verfahren (ISO 11652:1997); Deutsche Fassung EN ISO 11652:2022 | |
| Sterilisation von Medizinprodukten - Mikrobiologische Verfahren - Teil 1: Bestimmung der Population von Mikroorganismen auf Produkten (ISO 11737-1:2006); Deutsche Fassung EN ISO 11737-1:2006 + AC:2009 | |
| Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) | |
| Tactile warnings of danger on packaging - Requirements (ISO 11683:1997) | |
| Technical product documentation - Document management (ISO 11442:2006) | |
| Textile floor coverings - Determination of resistance to delamination (ISO 11857:1999) | |
| Textile floor coverings - Laboratory soiling - Part 2: Drum test (ISO/DIS 11378-2:2024); German and English version prEN ISO 11378-2:2024 | |
| Textile floor coverings - Laboratory soiling tests - Part 2: Drum test (ISO 11378-2:2001 + Amd 1:2017) (includes Amendment A1:2017) | |
| Textilglasverstaerkt e Kunststoffe - Prepregs, Formmassen und Laminate - Bestimmung des Textilglas- und Mineralfuellstoffgeh alts; Kalzinierungsverfahr en (ISO 1172:1996); Deutsche Fassung EN ISO 1172:1998 | |
| Textilien - Bestimmung der Widerstandsfaehigkei t zellulosehaltiger Textilien gegen Mikroorganismen - Erdeingrabtest; Teil 2: Nachweis der Langzeitbestaendigke it einer verrottungshemmenden Ausruestung (ISO 11721-2:2003); Deutsche Fassung EN ISO 11721-2:2003 | |
| Textilien - Nichtgewerbliche Waschverfahren fuer Textilien vor der Entflammbarkeitsprue fung (ISO 12138:1996); Deutsche Fassung EN ISO 12138:1996 | |
| Thermal insulation for building equipment and industrial installations - Calculation rules (ISO 12241:2008) | |
| Thermal performance of windows and doors - Determination of thermal transmittance by hot box method - Part 2: Roof windows and other projecting windows (ISO 12567-2:2005) | |
| Thermal performance of windows and doors - Determination of thermal transmittance by the hot-box method - Part 1: Complete windows and doors (ISO 12567-1:2010) | |
| Thermoplastics materials for pipes and fittings for pressure applications - Classification, designation and design coefficient (ISO 12162:2009) | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 1: General method (ISO 1167-1:2006) | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 2: Preparation of pipe test pieces (ISO 1167-2:2006) | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 3: Preparation of components (ISO 1167-3:2007) | |
| Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007) | |
| Transfusion equipment for medical use - Part 4: Transfusion sets for single use (ISO 1135-4:2010) | |
| Transfusion equipment for medical use - Part 4: Transfusion sets for single use, gravity feed (ISO/DIS 1135-4:2023); German and English version prEN ISO 1135-4:2023 | |
| Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO 1135-5:2015) | |
| Transfusion equipment for medical use - Part 5: Transfusion sets for single use with pressure infusion apparatus (ISO/DIS 1135-5:2023); German and English version prEN ISO 1135-5:2023 | |
| Transfusionsgeraete zur medizinischen Verwendung - Teil 3: Blutentnahmegeraete zur einmaligen Verwendung (ISO 1135-3:2016); Deutsche Fassung EN ISO 1135-3:2017 | |
| Ultra-high-molecular -weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 11542-1:2001); English version of DIN EN ISO 11542-1 | |
| Umweltgerechte Gebaeudeplanung - Planung, Auslegung, Installation und Steuerung flaechenintegrierter Strahlheizungs- und -kuehlsysteme - Teil 1: Begriffe, Symbole und Komfortkriterien (ISO 11855-1:2012); Deutsche Fassung EN ISO 11855-1:2015 | |
| Umweltgerechte Gebaeudeplanung - Planung, Auslegung, Installation und Steuerung flaechenintegrierter Strahlheizungs- und -kuehlsysteme - Teil 2: Bestimmung der Auslegungs-Heiz- bzw. Kuehlleistung (ISO 11855-2:2012); Deutsche Fassung EN ISO 11855-2:2015 | |
| Umweltgerechte Gebaeudeplanung - Planung, Auslegung, Installation und Steuerung flaechenintegrierter Strahlheizungs- und -kuehlsysteme - Teil 4: Auslegung und Berechnung der dynamischen Waerme- und Kuehlleistung fuer thermoaktive Bauteilsysteme (TABS) (ISO 11855-4 | |
| Vegetable fats and oils - Determination of phospholipids content in lecithins by HPLC using a light-scattering detector (ISO 11701:2009) | |
| Verpackung - Saecke aus thermoplastischer Kunststofffolie - Weiterreissfestigkei t an Falzkanten (ISO 11897:1999); Deutsche Fassung EN ISO 11897:2001 | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 1: Anforderungen an Materialien, Sterilbarrieresystem e und Verpackungssysteme (ISO 11607-1:2006 + Amd 1:2014); Deutsche Fassung EN ISO 11607-1:2009 + A1:2014,... | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 2: Validierungsanforder ungen an Prozesse der Formgebung, Siegelung und des Zusammenstellens (ISO 11607-2:2006); Deutsche Fassung EN ISO 11607-2:2006 | |
| Verpackungen fuer in der Endverpackung zu sterilisierende Medizinprodukte - Teil 3: Anforderungen an die Prozessentwicklung der Formgebung, Siegelung und des Zusammenstellens (ISO/DIS 11607-3:2025); Deutsche und Englische Fassung prEN ISO 11607-3:2025... | |
| Waermetechnisches Verhalten von Gebaeuden und Werkstoffen - Bestimmung des spezifischen Luftvolumenstroms in Gebaeuden - Indikatorgasverfahre n (ISO 12569:2012); Deutsche Fassung EN ISO 12569:2012 | |
| Wasserbeschaffenheit - Bestimmung ausgewaehlter Pflanzenbehandlungsm ittel - Verfahren mit der Hochaufloesungs-Flue ssigkeitschromatogra phie mit UV-Detektion nach Fest-Fluessig-Extrak tion (ISO 11369:1997); Deutsche Fassung EN ISO 11369:1997 | |
| Wasserbeschaffenheit - Bestimmung der Gentoxizitaet von Wasser und Abwasser - Verfahren mittels Salmonella/Microsome n-Fluktuationstest (Ames-Fluktuationste st) (ISO 11350:2012); Deutsche und Englische Fassung prEN ISO 11350:2025 | |
| Wasserbeschaffenheit - Bestimmung der Gesamt-Alpha- und Gesamt-Beta-Aktivita et in nicht-salzhaltigem Wasser - Verfahren mit dem Fluessigszintillatio nszaehler (ISO 11704:2010); Deutsche Fassung EN ISO 11704:2015 | |
| Wasserbeschaffenheit - Bestimmung der Hemmwirkung von Wasserproben auf die Lichtemission von Vibrio fischeri (Leuchtbakterientest ) - Teil 1: Verfahren mit frisch gezuechteten Bakterien (ISO 11348-1:2007); Deutsche Fassung EN ISO 11348-1:2008... | |
| Wasserbeschaffenheit - Bestimmung der Hemmwirkung von Wasserproben auf die Lichtemission von Vibrio fischeri (Leuchtbakterientest ) - Teil 2: Verfahren mit fluessig getrockneten Bakterien (ISO 11348-2:2007); Deutsche Fassung EN ISO 11348-2:2008... | |
| Wasserbeschaffenheit - Bestimmung der Hemmwirkung von Wasserproben auf die Lichtemission von Vibrio fischeri (Leuchtbakterientest ) - Teil 3: Verfahren mit gefriergetrockneten Bakterien (ISO 11348-3:2007); Deutsche Fassung EN ISO 11348-3:2008 | |
| Wasserbeschaffenheit - Bestimmung von Arsen - Atomabsorptionsspekt rometrie (Hydridverfahren) (ISO 11969:1996); Deutsche Fassung EN ISO 11969:1996 | |
| Wasserbeschaffenheit - Bestimmung von ausgewaehlten Elementen durch induktiv gekoppelte Plasma-Atom-Emission sspektrometrie (ICP-OES) (ISO 11885:2007); Deutsche Fassung EN ISO 11885:2009 | |
| Wasserbeschaffenheit - Bestimmung von kurzkettigen Chloralkanen (SCCP) in Wasser - Verfahren mittels Gaschromatographie-M assenspektrometrie (GC-MS) und negativer chemischer Ionisation (NCI) (ISO 12010:2012); Deutsche Fassung EN ISO 12010:2014 | |
| Wasserbeschaffenheit - Gesamt-Alpha- und Gesamt-Beta-Aktivita et - Verfahren mit dem Fluessigszintillatio nszaehler (ISO/DIS 11704:2025); Deutsche und Englische Fassung prEN ISO 11704:2025 | |
| Water quality - Detection and enumeration of Legionella - Part 2: Direct membrane filtration method for waters with low bacterial counts (ISO 11731-2:2004) | |
| Water quality - Determination of aluminium - Atomic absorption spectrometric methods (ISO 12020:1997); English version ofEN ISO 12020 | |
| Water quality - Determination of the elimination and biodegradability of organic compounds in an aqueous medium - Activated sludge simulation test (ISO 11733:2004) | |
| Water quality - Enumeration of Legionella (ISO 11731:2017) | |
| Wood-based panels - Determination of formaldehyde release - Part 3: Gas analysis method (ISO 12460-3:2015) | |
| Wood-based panels - Determination of formaldehyde release - Part 5: Extraction method (called the perforator method) (ISO 12460-5:2015) | |
| Zahnheilkunde - Implantate - Klinisches Verhalten manuell angewandter Drehmomentschluessel (ISO 11953:2010); Deutsche Fassung EN ISO 11953:2010 | |
| Zahnheilkunde - Zahnpasten - Anforderungen, Pruefverfahren und Kennzeichnung (ISO 11609:1995); Deutsche Fassung EN ISO 11609:1998 | |
| Zahnheilkunde - Zahnreinigungsmittel - Anforderungen, Pruefverfahren und Kennzeichnung (ISO/DIS 11609:2024); Deutsche und Englische Fassung prEN ISO 11609:2024 | |
| Zerstoerungsfreie Pruefung - Industrielle Filme fuer die Durchstrahlungspruef ung - Teil 1: Klassifizierung von Filmsystemen fuer die industrielle Durchstrahlungspruef ung (ISO 11699-1:2008); Deutsche Fassung EN ISO 11699-1:2011 | |
| Zerstoerungsfreie Pruefung von Schweissverbindungen - Ultraschallpruefung - Zulaessigkeitsgrenze n (ISO 11666:2010); Deutsche Fassung EN ISO 11666:2010 |
| << Prev | Next >> |