Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
160
170
180
190
200
207
208
209
210
211
212
213
214
215
216
217
218
219
220
230
240
250
260
270
300
350
400
450
500
550
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) DESIGN STANDARD, NUT, SELF-LOCKING, ACCESSORY MOUNTING | |
| (R) FITTING END, FLARED TUBE CONNECTION, EXTENDED THREAD, DESIGN STANDARD | |
| (R) MINIMUM STANDARD FOR PORTABLE GASEOUS, OXYGEN EQUIPMENT | |
| (R) MINIMUM STANDARDS FOR VALVE, HIGH PRESSURE OXYGEN, CYLINDER SHUT OFF, MANUALLY OPERATED | |
| Acoustics - Description and measurement of environmental noise - Acquisition of data pertinent to land use | |
| Acoustics - Description and measurement of environmental noise - Application to specific situations | |
| Acoustics - Description and measurement of environmental noise - General procedures | |
| Acoustics - Measurement of airborne noise emitted by rotating electrical machinery, Part 1: Engineering method for free-field conditions over a reflective plane | |
| Acoustics - Measurements of airborne noise emitted by rotating electrical machinery, Part 2: Survey method | |
| Automatic electric stroarge water heaters with hot water deliveries ranging from 25 litres to 630 litres | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 1: General | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2DB: Tests - Damp heat, cyclic (12 + 12-hour cycle) | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2ED: Tests - Free fall | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2FC: Tests - Vibration (Sinusoidal) | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2HA: Tests - Storage | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2HB: Tests - Storage | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2J: Tests - Mould growth | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2M: Tests - Low air pressure | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2NA: Tests - Test Na - Change of temperature - Rapid change of temperature, two-chamber method | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QA: Tests - Sealing of bushes, spindles and gaskets (normal test) | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QB: Tests - Sealing of spindles and gaskets (extended test) | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QC: Tests - Container sealing, gas leakage | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QD: Tests - Container sealing, seepage of filling liquid | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QE: Tests - Container sealing, penetration of liquid | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QF: Tests - Sealing | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QG: Driving rain | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QK: Tests - Tracer gas method with mass spectrometer | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2QL: Bomb pressure test | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2TA2: Tests - Solderabiity of printed circuit boards and metal-clad base laminates | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2TA: Test Ta: Solderability | |
| Basic environmental testing procedures for electronics and telecommunications purposes, Part 2U: Tests - Robustness of terminations | |
| Basic environmental testing procedures for electrotechnology - General | |
| Basic environmental testing procedures for electrotechnology, Part 0: Introduction and list of Parts of AS 1099 and IEC 68 | |
| Basic environmental testing procedures for electrotechnology, Part 2.10: Tests - Test J - Mould growth | |
| Basic environmental testing procedures for electrotechnology, Part 2.13: Tests - Test M - Low air pressure | |
| Basic environmental testing procedures for electrotechnology, Part 2.27: Tests - Test Ea - Shock | |
| Basic environmental testing procedures for electrotechnology, Part 2.28: Tests - Guidance for damp heat tests | |
| Basic environmental testing procedures for electrotechnology, Part 2.29: Tests - Test Eb - Bump and guidance | |
| Basic environmental testing procedures for electrotechnology, Part 2.31: Tests - Test Ec - Drop and topple, primarily for equipment | |
| Basic environmental testing procedures for electrotechnology, Part 2.3: Tests - Test Ca - Damp heat, steady state | |
| Basic environmental testing procedures for electrotechnology, Part 2.48: Tests - Guidance on the application of Tests A, B, and Ca to simulate the effects of storage | |
| Basic environmental testing procedures for electrotechnology, Part 2.63: Tests - Test Eg - Impact, spring hammer | |
| Basic environmental testing procedures for electrotechnology, Part 2.6: Tests - Test Fc - Vibration (sinusoidal) | |
| Basic environmental testing procedures for electrotechnology, Part 2.7: Tests 1099.2.7: Test Ga - Acceleration, steady state | |
| Basic environmental testing procedures for electrotechnology, Part 2Aa: Tests - Test Aa - Cold test for non-heat-dissipating specimens with sudden change of temperature | |
| Basic environmental testing procedures for electrotechnology, Part 2AB: Tests - Test Ab - Cold test for non-heat-dissipating specimens with gradual change of temperature | |
| Basic environmental testing procedures for electrotechnology, Part 2AD: Tests - Test Ad - Cold test for heat-dissipating specimens with gradual change of temperature | |
| Basic environmental testing procedures for electrotechnology, Part 2BB: Tests - Test Bb - Dry heat test for non-heat-dissipating specimens with gradual change of temperature | |
| Basic environmental testing procedures for electrotechnology, Part 2BC: Tests - Test Bc - Dry heat test for heat-dissipating specimens with sudden change of temperature | |
| Basic environmental testing procedures for electrotechnology, Part 2BD: Tests - Test Bd - Dry heat test for heat-dissipating specimens with gradual change of temperature | |
| Basic environmental testing procedures for electrotechnology, Part 2CA: Tests - Damp heat, steady state | |
| Basic environmental testing procedures for electrotechnology, Part 2DA: Tests - Test Da - Damp heat, 24-hour cycle | |
| Basic environmental testing procedures for electrotechnology, Part 2EA: Tests - Impact - Shock | |
| Basic environmental testing procedures for electrotechnology, Part 2EB: Tests - Bump | |
| Basic environmental testing procedures for electrotechnology, Part 2EC: Tests - Drop and topple | |
| Basic environmental testing procedures for electrotechnology, Part 2GA: Tests - Acceleration, steady state | |
| Basic environmental testing procedures for electrotechnology, Part 2KA: Tests - Test Ka - Salt mist | |
| Basic environmental testing procedures for electrotechnology, Part 2KC: Tests - Test Kc - Sulphur dioxide test for contacts and connections | |
| Basic environmental testing procedures for electrotechnology, Part 2KD: Tests - Test Kd - Hydrogen sulphide test for contacts and connections | |
| Basic environmental testing procedures for electrotechnology, Part 2N: Tests - Test N - Change of temperature - Guidance on change of temperature tests | |
| Basic environmental testing procedures for electrotechnology, Part 2NB: Tests - Test Nb - Change of temperature - Change of temperature, one-chamber method | |
| Basic environmental testing procedures for electrotechnology, Part 2SA: Tests - Test Sa - Simulated solar radiation | |
| Basic environmental testing procedures for electrotechnology, Part 2UA1: Tests - Test Ua1 - Robustness of terminations - Tensile | |
| Basic environmental testing procedures for electrotechnology, Part 2UA2: Tests - Test Ua2 - Robustness of terminations - Thrust | |
| Basic environmental testing procedures for electrotechnology, Part 2UB: Tests - Test Ub - Robustness of terminations - Bending | |
| Basic environmental testing procedures for electrotechnology, Part 2UC: Tests - Test Uc - Robustness of terminations - Torsion | |
| Basic environmental testing procedures for electrotechnology, Part 2UD: Tests - Test Ud - Robustness of terminations - Torque | |
| Basic environmental testing procedures for electrotechnology, Part 2ZAD: Tests - Test Z/AD - Composite temperature/humidity cyclic test | |
| Basic environmental testing procedures for electrotechnology, Part 2ZAM: Tests - Test Z/AM - Combined cold/low air pressure tests | |
| Basic environmental testing procedures for electrotechnology, Part 2ZAMD: Tests - Test Z/AMD: Combined sequential cold, low air pressure and damp heat test | |
| Basic environmental testing procedures for electrotechnology, Part 2ZBM: Tests - Test Z/BM - Combined dry heat/low air pressure tests | |
| Basic environmental testing procedures for electrotechnology, Part 3.1: Background information - Section 1 - Tests A and B - Cold and dry heat tests | |
| Basic environmental testing procedures for electrotechnology, Part 3.2: Background information - Section 2 - Combined temperature/low air pressure tests | |
| Basic environmental testing procedures for electrotechnology, Part 3.3: Background information - Guidance for damp heat tests | |
| Basic environmental testing procedures for electrotechnology, Part 3.4: Background information - Test T - Soldering | |
| Basic environmental testing procedures for electrotechnology, Part 3.5: Background information - Test Sa - Simulated solar radiation | |
| Basic environmental testing procedures for electrotechnology, Part 3.6: Background information - Guidance on test Q | |
| Basic environmental testing procedures for electrotechnology, Part 3.7: Background information - An appraisal of the problems of accelerated testing for atmospheric corrosion | |
| Basic environmental testing procedures for electrotechnology, Part 4: Information for specification writers - Test summaries | |
| Basic environmental testing procedures for electrotechnology | |
| Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) - Apparatus with type of protection 'e'... | |
| Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) - Apparatus with type of protection 'n'... | |
| Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications) - Apparatus with type of protection 's'... | |
| Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications), Part 13: Installation and maintenance requirements for... | |
| Code of practice for selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications), Part 3: Apparatus with type of protection... | |
| Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications), Part 1: Basic requirements | |
| Code of practice for the selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications), Part 2: Classification of hazardous areas... | |
| Dental chisels, excavators, probes and scalers | |
| Dental duplicating material | |
| Dental rotary instruments - Dimensions of shanks and chuck fittings | |
| Diagrams, charts and tables for electrotechnology - Basic principles for the presentation of elements of electrical diagrams | |
| Diagrams, charts and tables for electrotechnology - Definitions and classifications | |
| Diagrams, charts and tables for electrotechnology - Guiding principles for the preparation of circuit diagrams | |
| Diagrams, charts and tables for electrotechnology - Guiding principles for the preparation of logic diagrams | |
| Diagrams, charts and tables for electrotechnology - Item designation | |
| Diagrams, charts and tables for electrotechnology - Preparation of unit wiring diagrams and tables | |
| Diagrams, charts and tables for electrotechnology, Part 5: Preparation of interconnection diagrams and tables | |
| Diagrams, charts, and tables for electrotechnology - Representation of values of units of physical quantities | |
| Dimensions for punched paper tape for data interchange | |
| Dimensions of hubs and reels for magnetic tape for instrumentation interchange - Precision reels | |
| Dimensions of hubs and reels for magnetic tape for instrumentation interchange, Part 1-3: General purpose hubs and reels, with 76 mm (3 in) centre hole and General purpose reels with... | |
| Dimensions of hubs and reels for magnetic tape for instrumentation interchange | |
| Drawing practice - Letters, numerals and symbols | |
| Drawing practice - Scales | |
| Drawing practice, Part 10: Geometry tolerancing | |
| Drawing practice, Part 11: Indication of surface texture | |
| Drawing practice, Part 12: Conventional representations | |
| Drawing practice, Part 13: Architectural drawing | |
| Drawing practice, Part 1: Definitions | |
| Drawing practice, Part 2: Abbreviations and symbols | |
| Drawing practice, Part 3: Sizes of drawing sheets | |
| Drawing practice, Part 4: Layout of drawing sheets | |
| Drawing practice, Part 5: Lines | |
| Drawing practice, Part 8: Projection and sectioning - Metric units | |
| Drawing practice, Part 9: Dimensioning and tolerancing of size - Metric units | |
| Earth-moving machinery \x97 Hydraulic excavators \x97 Lift capacity | |
| Electromagnetic interference - Measuring apparatus and measurement methods | |
| Electromagnetic interference - Television and FM-sound receiving equipment - Limits and methods of measurement | |
| Electromagnetic interference limits and measurements for semiconductor control devices | |
| Electromagnetic interference measuring equipment, Part 1: Equipment for the frequency range 10 kHz to 150 kHz | |
| Electromagnetic interference measuring equipment, Part 2: Equipment for the range 0.15 MHz to 1000 MHz | |
| Expression of the physical and subjective magnitudes of sound or noise -Metric units | |
| Fire Testing of Flexible Hose, Tube Assemblies, Coils, Fittings, and Similar System Components | |
| FITTING END, BULKHEAD FLARED TUBE, FOR SEAL RING, STANDARD DIMENSIONS FOR, DESIGN STANDARD | |
| FITTING END, FLARED TUBE, FOR SEAL RING, STANDARD DIMENSIONS FOR, DESIGN STANDARD | |
| Fitting End-Flared Tube Connection, Extended Thread | |
| FITTING, UNION, FLARED TUBE BULKHEAD AND UNIVERSAL, FOR SEAL RING | |
| Glossary of formwork terms | |
| Glossary of terms for defects in woven and knitted textile piece goods | |
| Glossary of terms used in quality control | |
| Graphical symbols for electrotechnical documentation - Conductors and connecting devices | |
| Graphical symbols for electrotechnical documentation - Measuring instruments, lamps and signalling devices | |
| Graphical symbols for electrotechnical documentation - Passive components | |
| Graphical symbols for electrotechnical documentation - Production and conversion of electrical energy | |
| Graphical symbols for electrotechnical documentation - Semiconductors and electron tubes | |
| Graphical symbols for electrotechnical documentation - Switchgear, controlgear and protective devices | |
| Graphical symbols for electrotechnical documentation - Symbol elements, qualifying symbols and other symbols having general application | |
| Graphical symbols for electrotechnical documentation, Part 101: General information and general index | |
| Graphical symbols for electrotechnical documentation, Part 109: Telecommunications - Switching and peripheral equipment | |
| Graphical symbols for electrotechnical documentation, Part 110: Telecommunications - Transmission | |
| Graphical symbols for electrotechnology - Analogue elements | |
| Graphical symbols for electrotechnology - Conductors and connecting devices | |
| Graphical symbols for electrotechnology - Contacts, switchgear, starters and electromechanical relays | |
| Graphical symbols for electrotechnology - Electric traction | |
| Graphical symbols for electrotechnology - Electron tubes and rectifiers | |
| Graphical symbols for electrotechnology - General, qualifying and supplementary symbols | |
| Graphical symbols for electrotechnology - Logic symbols | |
| Graphical symbols for electrotechnology - Measuring instruments | |
| Graphical symbols for electrotechnology - Resistors, capacitors and inductors | |
| Graphical symbols for electrotechnology - Rotating electrical machines | |
| Graphical symbols for electrotechnology - Semiconductor devices | |
| Graphical symbols for electrotechnology - Signal transmission symbols | |
| Graphical symbols for electrotechnology, Part 13: Microwave technology | |
| Graphical symbols for electrotechnology, Part 14: Telephony, telegraphy and transducers | |
| Graphical symbols for electrotechnology, Part 8: Location symbols - Power supply systems and electrical services for buildings and sites | |
| Graphical symbols for general engineering - Hydraulic and pneumatic systems | |
| Graphical symbols for general engineering - Machine elements | |
| Graphical symbols for general engineering - Piping, ducting and mechanical services for buildings | |
| Graphical symbols for general engineering - Process measurement control functions and instrumentation | |
| Graphical symbols for general engineering - Welding | |
| Graphical symbols for general engineering, Part 2: Ventilation systems in ships | |
| Guide to loading of oil-immersed transformers, Part 1: Transformers to AS C61-1963 | |
| Guide to loading of oil-immersed transformers | |
| Hearing aids - Characteristics of electrical input circuits for hearing aids | |
| Hearing aids - Hearing aid equipment not entirely worn on the listener | |
| Hearing aids - Hearing aids with automatic gain control circuits | |
| Hearing aids - Hearing aids with induction pick-up coil input | |
| Hearing aids - Magnetic field strength in audio-frequency induction loops for hearing aid purposes | |
| Hearing aids - Measurement of electroacoustical characteristics | |
| Hearing aids - Measurement of the performance characteristics of hearing aids for quality inspection for delivery purposes | |
| Hearing aids - Nipples for insert earphones | |
| Hearing aids, Part 8: Method of measurement of performance characteristic of hearing aids under simulated in situ working conditions | |
| INDICATOR, HUMIDITY, LARGE | |
| Information technology - Open Systems Interconnection - Upper layers security model | |
| Informative symbols for use on electrical and electronic equipment - AC/DC. converter, rectifier, substitute power supply | |
| Informative symbols for use on electrical and electronic equipment - Adjustment to a maximum | |
| Informative symbols for use on electrical and electronic equipment - Adjustment to a minimum | |
| Informative symbols for use on electrical and electronic equipment - Aerial (scanner) rotation | |
| Informative symbols for use on electrical and electronic equipment - Aerial | |
| Informative symbols for use on electrical and electronic equipment - Air impeller (blower, fan, etc.)* | |
| Informative symbols for use on electrical and electronic equipment - Alternating current | |
| Informative symbols for use on electrical and electronic equipment - Amplifier | |
| Informative symbols for use on electrical and electronic equipment - Anti-rain clutter (position of maximum) | |
| Informative symbols for use on electrical and electronic equipment - Anti-rain clutter (position of minimum) | |
| Informative symbols for use on electrical and electronic equipment - Anti-sea clutter (position of maximum) | |
| Informative symbols for use on electrical and electronic equipment - Anti-sea clutter (position of minimum) | |
| Informative symbols for use on electrical and electronic equipment - Automatic frenquency control | |
| Informative symbols for use on electrical and electronic equipment - Balance | |
| Informative symbols for use on electrical and electronic equipment - Band-pass filter with variable centre frequency | |
| Informative symbols for use on electrical and electronic equipment - Band-pass filter with variable pass-band; selectivity control | |
| Informative symbols for use on electrical and electronic equipment - Band-pass filter | |
| Informative symbols for use on electrical and electronic equipment - Band-stop filter | |
| Informative symbols for use on electrical and electronic equipment - Bass control | |
| Informative symbols for use on electrical and electronic equipment - Bearing marker | |
| Informative symbols for use on electrical and electronic equipment - Bell | |
| Informative symbols for use on electrical and electronic equipment - Bidirectional microphone | |
| Informative symbols for use on electrical and electronic equipment - Both direct and alternating current | |
| Informative symbols for use on electrical and electronic equipment - Brightness; brilliance | |
| Informative symbols for use on electrical and electronic equipment - Class II equipment | |
| Informative symbols for use on electrical and electronic equipment - Clock; time switch; timer | |
| Informative symbols for use on electrical and electronic equipment - Colour (qualifying symbol) | |
| Informative symbols for use on electrical and electronic equipment - Colour saturation | |
| Informative symbols for use on electrical and electronic equipment - Colour television camera | |
| Informative symbols for use on electrical and electronic equipment - Colour television monitor | |
| Informative symbols for use on electrical and electronic equipment - Colour television receiver | |
| Informative symbols for use on electrical and electronic equipment - Colour television | |
| Informative symbols for use on electrical and electronic equipment - Colour video play-back | |
| Informative symbols for use on electrical and electronic equipment - Colour video recording | |
| Informative symbols for use on electrical and electronic equipment - Colour video tape recorder | |
| Informative symbols for use on electrical and electronic equipment - Crispener | |
| Informative symbols for use on electrical and electronic equipment - Cutting | |
| Informative symbols for use on electrical and electronic equipment - Dangerous voltage | |
| Informative symbols for use on electrical and electronic equipment - Dipole | |
| Informative symbols for use on electrical and electronic equipment - Direct current | |
| Informative symbols for use on electrical and electronic equipment - Dynamic pick-up, electro-or magneto-dynamic | |
| Informative symbols for use on electrical and electronic equipment - Earphone | |
| Informative symbols for use on electrical and electronic equipment - Earth | |
| Informative symbols for use on electrical and electronic equipment - Effect or action away from a reference point. | |
| Informative symbols for use on electrical and electronic equipment - Effect or action in both directions away from a reference point | |
| Informative symbols for use on electrical and electronic equipment - Effect or action in both directions towards a reference point | |
| Informative symbols for use on electrical and electronic equipment - Effect or action towards a reference point | |
| Informative symbols for use on electrical and electronic equipment - Equipotentiality | |
| Informative symbols for use on electrical and electronic equipment - Erasing from an information carrier | |
| Informative symbols for use on electrical and electronic equipment - Erasing from tape | |
| Informative symbols for use on electrical and electronic equipment - Fast run | |
| Informative symbols for use on electrical and electronic equipment - Fast start | |
| Informative symbols for use on electrical and electronic equipment - Fast stop | |
| Informative symbols for use on electrical and electronic equipment - Focus | |
| Informative symbols for use on electrical and electronic equipment - Foot switch | |
| Informative symbols for use on electrical and electronic equipment - Frame aerial | |
| Informative symbols for use on electrical and electronic equipment - Frame or chassis | |
| Informative symbols for use on electrical and electronic equipment - Fuse | |
| Informative symbols for use on electrical and electronic equipment - Heading marker | |
| Informative symbols for use on electrical and electronic equipment - Headphones | |
| Informative symbols for use on electrical and electronic equipment - Headset | |
| Informative symbols for use on electrical and electronic equipment - High-pass filter | |
| Informative symbols for use on electrical and electronic equipment - Horizontal linearity | |
| Informative symbols for use on electrical and electronic equipment - Horizontal picture amplitude | |
| Informative symbols for use on electrical and electronic equipment - Horizontal picture shift | |
| Informative symbols for use on electrical and electronic equipment - Horizontal synchronization | |
| Informative symbols for use on electrical and electronic equipment - Horn | |
| Informative symbols for use on electrical and electronic equipment - Hue | |
| Informative symbols for use on electrical and electronic equipment - Hydrophone | |
| Informative symbols for use on electrical and electronic equipment - Input | |
| Informative symbols for use on electrical and electronic equipment - Instruction or correction | |
| Informative symbols for use on electrical and electronic equipment - Lamp; lighting; illumination | |
| Informative symbols for use on electrical and electronic equipment - Length or end of text | |
| Informative symbols for use on electrical and electronic equipment - Long pulse | |
| Informative symbols for use on electrical and electronic equipment - Loudspeaker/micropho ne | |
| Informative symbols for use on electrical and electronic equipment - Loudspeaker | |
| Informative symbols for use on electrical and electronic equipment - Magnetic-tape stereo sound recorder | |
| Informative symbols for use on electrical and electronic equipment - Marker | |
| Informative symbols for use on electrical and electronic equipment - Microphone | |
| Informative symbols for use on electrical and electronic equipment - Minus; negative polarity | |
| Informative symbols for use on electrical and electronic equipment - Monitoring at the input during recording on tape | |
| Informative symbols for use on electrical and electronic equipment - Monitoring during play-back or reading from tape | |
| Informative symbols for use on electrical and electronic equipment - Monitoring from tape after recording on tape | |
| Informative symbols for use on electrical and electronic equipment - Monitoring input data after writing or recording on an information carrier | |
| Informative symbols for use on electrical and electronic equipment - Monitoring input data during writing or recording on an information carrier | |
| Informative symbols for use on electrical and electronic equipment - Monitoring output data during read-out reproduction from an information carrier | |
| Informative symbols for use on electrical and electronic equipment - Monophonic | |
| Informative symbols for use on electrical and electronic equipment - Movement in both directions | |
| Informative symbols for use on electrical and electronic equipment - Movement in one direction | |
| Informative symbols for use on electrical and electronic equipment - Movement limited in both directions | |
| Informative symbols for use on electrical and electronic equipment - Music | |
| Informative symbols for use on electrical and electronic equipment - Muting | |
| Informative symbols for use on electrical and electronic equipment - Noiseless (clean) earth | |
| Informative symbols for use on electrical and electronic equipment - Non-simultaneous effect or action away from and towards a reference point | |
| Informative symbols for use on electrical and electronic equipment - Normal run | |
| Informative symbols for use on electrical and electronic equipment - North-up presentation | |
| Informative symbols for use on electrical and electronic equipment - Off (power) | |
| Informative symbols for use on electrical and electronic equipment - Omnidirectional microphone | |
| Informative symbols for use on electrical and electronic equipment - On (power) | |
| Informative symbols for use on electrical and electronic equipment - On/off (push button) | |
| Informative symbols for use on electrical and electronic equipment - On/off (push-push) | |
| Informative symbols for use on electrical and electronic equipment - Output | |
| Informative symbols for use on electrical and electronic equipment - Pause; interruption | |
| Informative symbols for use on electrical and electronic equipment - Pick-up for disk records | |
| Informative symbols for use on electrical and electronic equipment - Pick-up for video disk record player | |
| Informative symbols for use on electrical and electronic equipment - Picture size adjustment | |
| Informative symbols for use on electrical and electronic equipment - Piezo-electric pick-up, crystal or ceramic | |
| Informative symbols for use on electrical and electronic equipment - Play-back or reading from tape | |
| Informative symbols for use on electrical and electronic equipment - Plus; positive polarity | |
| Informative symbols for use on electrical and electronic equipment - Protective earth | |
| Informative symbols for use on electrical and electronic equipment - Range rings brilliance | |
| Informative symbols for use on electrical and electronic equipment - Range selector | |
| Informative symbols for use on electrical and electronic equipment - Reading on reproduction from an information carrier | |
| Informative symbols for use on electrical and electronic equipment - Recording lock on tape recorders | |
| Informative symbols for use on electrical and electronic equipment - Recording lock | |
| Informative symbols for use on electrical and electronic equipment - Recording on an information carrier | |
| Informative symbols for use on electrical and electronic equipment - Recording on tape | |
| Informative symbols for use on electrical and electronic equipment - Rejection | |
| Informative symbols for use on electrical and electronic equipment - Reversible transducer | |
| Informative symbols for use on electrical and electronic equipment - Ship's head-up presentation | |
| Informative symbols for use on electrical and electronic equipment - Short pulse | |
| Informative symbols for use on electrical and electronic equipment - Signal lamp | |
| Informative symbols for use on electrical and electronic equipment - Signal strength attenuation (local/distant) | |
| Informative symbols for use on electrical and electronic equipment - Simultaneous effect or action away from and towards a reference point | |
| Informative symbols for use on electrical and electronic equipment - Stand-by | |
| Informative symbols for use on electrical and electronic equipment - Start (of action) | |
| Informative symbols for use on electrical and electronic equipment - Stereophonic headphones | |
| Informative symbols for use on electrical and electronic equipment - Stereophonic microphone | |
| Informative symbols for use on electrical and electronic equipment - Stereophonic pick-up for disk records | |
| Informative symbols for use on electrical and electronic equipment - Stereophonic | |
| Informative symbols for use on electrical and electronic equipment - Stop (of action) | |
| Informative symbols for use on electrical and electronic equipment - Tape cutting | |
| Informative symbols for use on electrical and electronic equipment - Tape recorder | |
| Informative symbols for use on electrical and electronic equipment - Telephone; telephone adapter | |
| Informative symbols for use on electrical and electronic equipment - Television camera | |
| Informative symbols for use on electrical and electronic equipment - Television monitor | |
| Informative symbols for use on electrical and electronic equipment - Television receiver | |
| Informative symbols for use on electrical and electronic equipment - Television; video | |
| Informative symbols for use on electrical and electronic equipment - Transfer of signal | |
| Informative symbols for use on electrical and electronic equipment - Transformer | |
| Informative symbols for use on electrical and electronic equipment - Transmit/receive monitor | |
| Informative symbols for use on electrical and electronic equipment - Transmitted power monitor | |
| Informative symbols for use on electrical and electronic equipment - Treble control | |
| Informative symbols for use on electrical and electronic equipment - Tuner; radio receiver | |
| Informative symbols for use on electrical and electronic equipment - Tuning | |
| Informative symbols for use on electrical and electronic equipment - Underwater sound projector | |
| Informative symbols for use on electrical and electronic equipment - Unidirectional or cardioid microphone | |
| Informative symbols for use on electrical and electronic equipment - Variability | |
| Informative symbols for use on electrical and electronic equipment - Variable range marker | |
| Informative symbols for use on electrical and electronic equipment - Vertical linearity | |
| Informative symbols for use on electrical and electronic equipment - Vertical picture amplitude | |
| Informative symbols for use on electrical and electronic equipment - Vertical picture shift | |
| Informative symbols for use on electrical and electronic equipment - Vertical synchronization | |
| Informative symbols for use on electrical and electronic equipment - Video play-back | |
| Informative symbols for use on electrical and electronic equipment - Video recording | |
| Informative symbols for use on electrical and electronic equipment - Video tape recorder | |
| Informative symbols for use on electrical and electronic equipment, Part 5001: Battery Check | |
| Informative symbols for use on electrical and electronic equipment, Part 5002: Positioning of cell | |
| Informative symbols for use on electrical and electronic equipment, Part 5092: Low-pass filter | |
| Informative symbols for use on electrical and electronic equipment | |
| International code for fibreboard cases (The Selin code) | |
| Letter symbols for physical quantities for use in electrotechnology and abbreviations and symbols for units for such quantities, Part 1: General | |
| Letter symbols for use in electrotechnology - Logarithmic quantities and units | |
| Letter symbols for use in electrotechnology - Symbols for quantities to be used for rotating electrical machines | |
| Letter symbols for use in electrotechnology, Part 2: Telecommunications and electronics | |
| Limits of electromagnetic interference for electrical appliances and equipment | |
| Magnetic tape labelling and file structure for information exchange | |
| Method for conditioning textile materials for test | |
| Method for the determination of tear resistance of woven textile fabricsby the wing-rip method | |
| Method for the determination of the number of wales and courses per unitlength in a sample of knitted fabric | |
| Method of measurement of absorption coefficients in a reverberation room | |
| Methods for non-destructive testing of ferritic steel forgings, Part 1: Ultrasonic flaw detection | |
| Methods for the analysis of iron and steel, Part 10: Determination of manganese in plain carbon steels, low alloys steels and cast irons (titrimetric method) | |
| Methods for the analysis of iron and steel, Part 12: Determination of nitrogen in steel (steam distillation titrimetric method) | |
| Methods for the analysis of iron and steel, Part 14: Determination of manganese in iron and steel (Titrimetric Method) | |
| Methods for the analysis of iron and steel, Part 17: Determination of copper content - Spectrophotometric method | |
| Methods for the analysis of iron and steel, Part 18: Determination of phosphorus (spectrophotometric method) | |
| Methods for the analysis of iron and steel, Part 19: Determination of nickel content - Spectrophotometric method | |
| Methods for the analysis of iron and steel, Part 20: Determination of magnesium in iron and steel (flame atomic absorption spectrometric method) | |
| Methods for the analysis of iron and steel, Part 23: Determination of molybdenum content - Flame atomic absorption spectrometric method | |
| Methods for the analysis of iron and steel, Part 25: Determination of lead content (flame atomic absorption spectrometric method) | |
| Methods for the analysis of iron and steel, Part 26: Determination of silicon in iron and steel (spectrophotometric method) | |
| Methods for the analysis of iron and steel, Part 27: Titanium in steel (spectrophotometric method) | |
| Methods for the analysis of iron and steel, Part 28: Determination of vanadium in steel (potentiometric method) | |
| Methods for the analysis of iron and steel, Part 29: Cobalt in iron and steel (atomic absorption spectrometric method) | |
| Methods for the analysis of iron and steel, Part 2: Determination of carbon content (gravimetric method) | |
| Methods for the analysis of iron and steel, Part 30: Determination of boron in steel (spectrophotometric method using curcumin) | |
| Methods for the analysis of iron and steel, Part 31: Determination of niobium in steel (spectrophotometric method) | |
| Methods for the analysis of iron and steel, Part 32: Determination of carbon content (infrared method) | |
| Methods for the analysis of iron and steel, Part 33: Determination of nickel content - Flame atomic absorption spectrometric method | |
| Methods for the analysis of iron and steel, Part 8: Determination of manganese content in iron and steel (spectrophotometric method) | |
| Methods for the analysis of iron and steel, Part 9: Determination of chromium (potentiometric method) | |
| Methods for the analysis of liquid milk and cream | |
| Methods for the determination of resistance of fabrics to water: Waterrepellency and water penetration (Metric units) | |
| Methods of measurement of airborne noise emitted by rotating electrical machinery | |
| Methods of measurement of the electroacoustic characteristics of airconduction hearing aids - Metric units | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 2.1: Liquid milk | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 2.2: Cream | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 2.3: Butter and butter products | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 2.4: Cheese | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 2.6: Acid casein | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 2.7: UHT milk and cream | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 3.1: Coliforms | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 3.2: Methods of examination for specific groups of microorganisms - Coagulase-positive staphylococci | |
| Methods of microbiological examination of dairy products and for dairy purposes, Part 3.3: Yeasts and moulds | |
| Methods of testing timber - Determination of compound slope of grain | |
| Methods of testing timber - Determination of density | |
| Methods of testing timber - Determination of slope of grain by reference to surface checks | |
| Methods of testing timber - Determination of slope of grain by scribe | |
| Methods of testing timber, Method 2.3: Determination of slope of grain by splintering | |
| Methods of testing timber, Part 1: Moisture content | |
| Methods of the Microbiological Examination of Dairy Products and for Dairy Purposes, Part 3.8: Salmonellae | |
| Microbiological examination of dairy products and for dairy purposes, Part 2.10: Method for the examination of specific dairy products - Canned dairy products | |
| Microbiological methods for the dairy industry, Part 2.11: Methods for the examination of specific dairy products - Cultured dairy products | |
| Microbiological methods for the dairy industry, Part 2.12: Methods for the examination of specific dairy products - Microbiological examination of rennets | |
| Microbiological methods for the dairy industry, Part 2.5: Methods for the examination of specific dairy products - Ice cream and frozen milk products | |
| Microbiological methods for the dairy industry, Part 2.8: Microbiological methods for the dairy industry - Microbiological methods for the dairy industry | |
| Microbiological methods for the dairy industry, Part 2.9: Methods for the examination of specific dairy products - Sweetened condensed milk | |
| Microbiological methods for the dairy industry, Part 2BA: Tests Test Ba - Dry heat test for non-heat-dissipating specimens with sudden change of temperature | |
| Microbiological methods for the dairy industry, Part 3.10: Methods of examination for specific groups of microorganisms - Escherichia coli - Direct plate method | |
| Microbiological methods for the dairy industry, Part 3.4: Methods of examination for specific groups of microorganisms - Lipolytic organisms in butter | |
| Microbiological methods for the dairy industry, Part 3.5: Methods of examination for specific groups of microorganisms - Psychrotrophic organisms | |
| Microbiological methods for the dairy industry, Part 3.6: Methods of examination for specific groups of microorganisms - Proteolytic organisms | |
| Microbiological methods for the dairy industry, Part 3.7: Methods for the detection of specific groups of micro-organisms - Bacterial spores | |
| Microbiological methods for the dairy industry, Part 3.9: Methods of examination for specific groups of microorganisms - Thermophilic organisms | |
| Microbiological methods for the dairy industry, Part 4.1.10: Methods for the examination of water and air - Microbiological examination of water - Pseudomonads by multiple tube dilution | |
| Microbiological methods for the dairy industry, Part 4.1.11: Methods for the examination of water and air - Microbiological examination of water - Pseudomonas aeruginosa by multiple tube dilution | |
| Microbiological methods for the dairy industry, Part 4.1.12: Methods for the examination of water and air - Microbiological examination of water - Pseudomonads by membrane filtration | |
| Microbiological methods for the dairy industry, Part 4.1.13: Methods for the examination of water and air - Microbiological examination of water - Pseudomonas aeruginosa by membrane filtration | |
| Microbiological methods for the dairy industry, Part 4.1.1: Methods for the examination of water and air - Microbiological examination of water - Scope and general requirements | |
| Microbiological methods for the dairy industry, Part 4.1.2: Methods for the examination of water and air - Microbiological examination of water - Colony count by the pour plate method | |
| Microbiological methods for the dairy industry, Part 4.1.3: Methods for the examination of water and air - Microbiological examination of water - Coliforms by multiple tube dilution | |
| Microbiological methods for the dairy industry, Part 4.1.4: Methods for the examination of water and air - Microbiological examination of water - Escherichia coli by multiple tube dilution | |
| Microbiological methods for the dairy industry, Part 4.1.5: Methods for the examination of water and air - Microbiological examination of water - Coliforms by membrane filtration | |
| Microbiological methods for the dairy industry, Part 4.1.6: Methods for the examination of water and air - Microbiological examination of water - Escherichia coli by membrane filtration | |
| Microbiological methods for the dairy industry, Part 4.1.7: Methods for the examination of water and air - Microbiological examination of water - Enterococci by multiple tube dilution | |
| Microbiological methods for the dairy industry, Part 4.1.8: Methods for the examination of water and air - Microbiological examination of water - Enterococci by membrane filtration | |
| Microbiological methods for the dairy industry, Part 4.1.9: Methods for the examination of water and air - Microbiological examination of water - Salmonellae | |
| Microbiological methods for the dairy industry, Part 5.2: Methods for the assessment of dairy plant hygiene - Assessment of the microbial condition of retail containers for dairy products | |
| Minimum Standard for Portable Gaseous, Oxygen Equipment | |
| Minimum Standards for Valve, High Pressure Oxygen, Cylinder Shut Off, Manually Operated | |
| Noise assessment in residential areas | |
| Non-destructive testing - Ultrasonic testing of carbon and low alloy steel forgings | |
| Nut, Self-Locking, Accessory Mounting | |
| Packaging of items (sterile) for patient care - Guide to selection of packaging materials for goods undergoing sterilization | |
| Packaging of items (sterile) for patient care - Paper for the wrapping of goods undergoing sterilization | |
| Packaging of items (sterile) for patient care, Part 3: Paper bags for goods undergoing sterilization | |
| Packaging of items (sterile) for patient care, Part 4: Flexible packaging systems - For single use in hospitals | |
| Packaging of items (sterile) for patient care, Part 5: Non-reusable, non-woven wrapping materials - For goods undergoing sterilization in health care facilities | |
| PERSONNEL OF CODES, STANDARDS, AND RELATED ACCREDITATION COMMITTEES | |
| Pipe Couplings, Adaptor Nipple | |
| Pipe Couplings, Nipple | |
| Placement and presentation of hand hygiene materials in relation to the basin in healthcare settings | |
| Polyethylene insulation and sheath of telecommunication cables | |
| Pulley Ballbearing 4.0 DIA. | |
| Pulley Ballbearing 5.0 DIA. | |
| Pulley, Shrouded (Quadruple) | |
| Pulley, Shrouded (Single) | |
| Pulley, Shrouded (Triple) | |
| Pulley, Shrouded (Twin) | |
| QUALITY & SERVICEABILITY REQUIREMENTS FOR AIRCRAFT CYLINDER ASSEMBLIES CHARGED WITH AVIATOR'S BREATHING OXYGEN (STABILIZED TYPE) | |
| Quality & Serviceability Requirements for Aircraft Cylinder Assemblies Charged with Aviator\x92s Breathing Oxygen | |
| Reference coupler for the measurement of the electro-acoustic characteristics of hearing aid earphones | |
| Roller-type screw calliper gauges | |
| Rough-terrain trucks - Safety requirements and verification, Part 1: Variable-reach trucks (ISO 10896-1:2012, MOD) | |
| Rutin (Pharmaceutical grade) | |
| Rutin | |
| Seal Ring, 37 Degree Flared Tube Fitting End | |
| Selection, installation and maintenance of electrical apparatus and associated equipment for use in explosive atmospheres (other than mining applications), Part 4: Apparatus with type of protection ''i'' - intrinsically safe... | |
| Single-Degree-of-Fre edom Spring-Restrained Rate Gyros | |
| Single-use syringes (sterile) for general medical use | |
| Single-use syringes (sterile) for insulin injection | |
| SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE (STABILIZED TYPE) | |
| SLEEVE HOSE ASSEMBLY, HEAT SHRINKABLE | |
| SLEEVE, HOSE ASSEMBLY, FIRE PROTECTION | |
| Sodium hypochlorite solutions for use in the dairying industry | |
| Steel tubes and tubulars suitable for screwing to AS B53 pipe threads | |
| Sterile hypodermic syringes for single use, Part 1: Syringes for manual use | |
| Storage water heaters - Calculations of energy consumption | |
| Storage water heaters - General requirements | |
| Storage water heaters - Specific requirements for water heaters with composite shells | |
| Storage water heaters - Specific requirements for water heaters with single shells | |
| Sunglass lenses | |
| Sunglasses and fashion spectacles, Part 1: Safety requirements | |
| Sunglasses and fashion spectacles, Part 2: Performance requirements | |
| Surface Finish (RMS) | |
| Technical drawing - Architectural drawing | |
| Technical drawing - General principles | |
| Technical drawing - Structural engineering drawing | |
| Technical drawing, Part 201: Mechanical drawing | |
| Technical drawing, Part 401: Engineering survey and engineering survey design drawing - Aviation facilities (Supplement to AS 1100.401-1984) | |
| Technical drawing, Part 401: Engineering survey and engineering survey design drawing - Gas distribution (Supplement to AS 1100.401-1984) | |
| Technical drawing, Part 401: Engineering survey and engineering survey design drawing - Roads (Supplement to AS 1100.401-1984) | |
| Technical drawing, Part 401: Engineering survey and engineering survey design drawing - Sewerage and water supply (Supplement to AS 1100.401-1984) | |
| Technical drawing, Part 401: Engineering survey and engineering survey design drawing | |
| Technical drawing, Part 501: Structural engineering drawing - Structural engineering drawings (Supplement to AS 1100.501-1985) | |
| Telecommunication cables - Insulation, sheath and jacket, Part 1: Materials | |
| Telecommunication cables - Insulation, sheath and jacket, Part 2: Test methods | |
| The definition of 4-bit character sets derived from the Australian Standard 7-bit coded character set | |
| The sterilization of packaged goods | |
| Union, Flared Tube Bulkhead and Universal, for Seal Ring | |
| Universal symbols for operator controls on agricultural and light industrial equipment | |
| Unrecorded magnetic tapes for instrumentation applications - General and dimensional requirements | |
| Unrecorded magnetic tapes for instrumentation applications, Part 2: Physical properties and test methods |
| << Prev | Next >> |