Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
150
160
170
180
190
200
203
204
205
206
207
208
209
210
211
212
213
214
215
220
230
240
250
260
270
300
350
400
450
500
550
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) ABBREVIATIONS, ACRONYMS, AND TERMS FOR USE ON THE FLIGHT DECK | |
| (R) Accumulator, Hydraulic, Welded Bellows, Factory Pre-Charged | |
| (R) Actuators: Mechanical, Geared Rotary, General Specification For | |
| (R) Aerospace - Accumulator, Hydraulic, Cylindrical, Piston Separated | |
| (R) Aerospace - Accumulator, Hydraulic, Self-Displacing | |
| (R) Aerospace - Accumulator, Hydraulic, Welded Bellows, Factory Precharged | |
| (R) Aerospace - Design and Installation of Commercial Transport Aircraft Hydraulic Systems | |
| (R) Aerospace - Direct Drive Servovalves | |
| (R) Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure | |
| (R) Airborne Windshear Systems | |
| (R) Aircraft Deicing/Anti-Icing Methods | |
| (R) Aircraft Ground Service Connections Locations and Type | |
| (R) Aircraft Tire Retreading Practice - Bias and Radial | |
| (R) Automatic Test Equipment, Relays Not Fully Rated 25 Amperes or Greater | |
| (R) Balancing Machine Proving Rotors | |
| (R) Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors | |
| (R) Balancing Machines - Description and Selection Horizontal, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors | |
| (R) Balancing Machines: Tooling Design Criteria | |
| (R) Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts | |
| (R) Cabin Emergency Exits Design and Operation - Transport Category Aircraft | |
| (R) Coiled Tubing \x96 Titanium Alloy, Hydraulic Applications, Aerospace | |
| (R) Crew Rest Facilities | |
| (R) Definitions and Limits, Metal Material Defects and Surface and Edge Features, Fluid Couplings, Fittings and Hose Ends | |
| (R) Design of Aircraft Deicing Facilities | |
| (R) Design Specification for Towbarless Tow Vehicles | |
| (R) Determination of Hydraulic Pressure Drop | |
| (R) Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems | |
| (R) Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure | |
| (R) Environmental Control Systems for Rotorcraft | |
| (R) Exits and Their Operation \x96 Air Transport Cabin Emergency | |
| (R) Flight Control Actuators - Dynamic Seals, Collection of Duty Cycle Data | |
| (R) Flight Deck Interior Doors for Transport Aircraft | |
| (R) Flight Deck Lighting for Commercial Transport Aircraft | |
| (R) Function-Based API for Gas Turbine Engine Performance Programs | |
| (R) General Specification Guide for Mechanical Geared Rotary Actuators | |
| (R) Guidelines for Conducting the Safety Assessment Process on Civil Aircraft, Systems, and Equipment | |
| (R) Guidelines for Development of Civil Aircraft and Systems | |
| (R) Hand-Held Cabin Fire Extinguishers Transport Aircraft | |
| (R) Human Engineering Considerations in the Application of Color to Electronic Aircraft Displays | |
| (R) Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair | |
| (R) Night Vision Goggle (NVG) Filters | |
| (R) Passenger Reading Lights | |
| (R) Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays | |
| (R) Pilot Visibility from the Flight Deck | |
| (R) Portable Cabin Fire Extinguishers Transport Aircraft | |
| (R) Procedure for Inspection of In-Service Airborne Accumulators for Corrosion and Damage | |
| (R) Procedure for Sampling and Measurement of Aircraft Propulsion Engine and APU Generated Contaminants in Bleed Air | |
| (R) Procedure for Sampling and Measurement of Engine and APU Generated Contaminants in Bleed Air Supplies from Aircraft Engines | |
| (R) Recommended Design and Test Requirements for Direct Drive Servovalves | |
| (R) Recommended Design and Test Requirements for Hydraulic Thermal Expansion Relief Valves | |
| (R) Selection and Application of Electro-Mechanical Relays for Proper Performance | |
| (R) Self-Displacing Hydraulic Accumulator | |
| (R) Supplemental Oxygen Devices with Automatic or Manual Presentation | |
| (R) TERMINOLOGY AND DEFINITIONS FOR AEROSPACE FLUID POWER, ACTUATION AND CONTROL TECHNOLOGIES | |
| (R) TRAFFIC DISPLAY AND COLLISION AVOIDANCE SYSTEMS | |
| (R) Turboshaft/Turboprop Gas Turbine Engine Test Cell Correlation | |
| (R) Ultrasonic Thickness Testing | |
| (R) WING INSPECTION LIGHTS - DESIGN CRITERIA | |
| (R) Wing Inspection Lights \x96 Design Criteria | |
| Abbreviations and Acronyms for Use on the Flight Deck | |
| Abbreviations, Acronyms, and Terms for Use on the Flight Deck | |
| Accommodation for Passengers with Ambulatory Disabilities in Transport Category Aircraft Cabins with Seating Capacities Greater than 44 | |
| Accommodation for Passengers with Ambulatory Disabilities Transport Category Aircraft Cabins with Seating Capacities Greater Than 44 | |
| Accumulator, Hydraulic, Cylindrical Aircraft, Self-Displacing | |
| Accumulator, Hydraulic, Cylindrical Aircraft | |
| Accumulators, Hydraulic, Cylindrical, Aircraft, Maintenance Free, Factory Precharged | |
| Actuators: Mechanical, Geared Rotary, General Specification for | |
| Aerospace - Accumulator, Hydraulic, Welded Bellows, Factory Precharged | |
| Aerospace - Deicing/Anti-Icing Self-Propelled Vehicle Functional Requirements | |
| Aerospace - Design and Installation of Commercial Transport Aircraft Hydraulic Systems | |
| Aerospace - Direct Drive Servovalves | |
| Aerospace - Evaluation of Particulate Contamination in Hydraulic Fluid - Membrane Procedure | |
| Aerospace - Flight Control Actuator Displacement - Method for Collection of Duty Cycle Data | |
| Aerospace - General Requirements for Hydraulic Relief Valves | |
| Aerospace Fluid Power - Hydraulic Filter Elements - Method for Evaluating Dynamic Efficiency with Cyclic Flow | |
| Aerospace Fluid Power-Hydraulic Thermal Expansion Relief Valves | |
| Aerospace Glossary for Human Factors Engineers | |
| Aerospace Hydraulic System Fluid Contamination - Location of Sampling Points | |
| Aerospace-Hydraulic Switching Valve, Pressure or Pilot Operated | |
| Air Cargo Pallets and Nets Compatibility | |
| Air Cargo Unit Load Devices - Center of Gravity Control Methods | |
| Air Cargo Unit Load Devices \x96 Center of Gravity Control Methods | |
| Air Conditioning, Helicopter, General Requirements for | |
| AIR CONDITIONING, HELICOPTERS, GENERAL REQUIREMENTS FOR | |
| Airborne Landing Guidance System for Transport Aircraft | |
| AIRBORNE WINDSHEAR SYSTEMS | |
| AIRCRAFT ACCISSORY GEARBOXES | |
| Aircraft Circuit Breaker and Fuse Arrangement | |
| Aircraft Deicing Vehicle Self-Propelled, Small Capacity | |
| Aircraft Deicing/ Anti-Icing Methods with Fluids | |
| Aircraft Deicing/Anti-Icing Methods with Fluids | |
| AIRCRAFT DEICING/ANTI-ICING METHODS | |
| Aircraft Electrical Installations | |
| Aircraft Ground Service Connections Locations and Type | |
| Aircraft Tire Retreading Practice - Bias and Radial | |
| AIRCRAFT TURBINE ENGINE PNEUMATIC COMPONENT CONTAMINATED AIR ENDURANCE TEST | |
| Aircraft/Engine Fuel Pump Net Positive Suction Pressure Performance Test and Evaluation | |
| Aircraft/Engine Fuel Pump Two Phase (Slugging Flow) Inlet Performance Test and Evaluation | |
| Airfoil Shapes- Dimensioning of Turbine Engine | |
| AIRPLANE CABIN PRESSURIZATION | |
| Appendix A Electronic Display Symbology for EADI/PFD | |
| Appendix B Electronic Display Symbology for EHSI/ND | |
| Appendix C Electronic Display Symbology for Engine Displays | |
| Application of Low Speed Avionic System Discrete Signal Interfaces | |
| Application Programming Interface Requirements for the Presentation of Gas Turbine Engine Performance on Digital Computers | |
| Approach to Landing Guidance System for Transport Aircraft | |
| Automatic Braking System (ABS) | |
| Automatic Pilot Installations | |
| Automatic Presentation of Supplemental Oxygen Masks | |
| Automatic Test Equipment, Relays Fully Rated 25 Amperes or Greater | |
| Automatic Test Equipment, Relays Not Fully Rated 25 Amperes or Below, Aerospace Recommended Practice for | |
| Automatic Test Equipment, Relays Not Fully Rated 25 Amperes or Greater | |
| Balancing Machine Proving Rotors | |
| Balancing Machines - Description and Evaluation Horizontal, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors | |
| Balancing Machines - Description and Evaluation Vertical, Two-Plane, Hard-Bearing Type for Gas Turbine Rotors | |
| Balancing Machines: Tooling Design Criteria | |
| Barkhausen Noise Inspection for Detecting Grinding Burns in High Strength Steel Parts | |
| Bearing Corrosion Test Method | |
| BLADE OR VANE - DIMENSIONING OF TURBINE ENGINE AIRFOIL | |
| Cabin Accommodations for Passengers with Ambulatory Disabilities Transport Category Aircraft | |
| Capability Guidelines for Computer Controlled Test Equipment for Hydraulic Components | |
| Cargo Restraint on Aircraft Passenger Seats - Main Passenger Cabin | |
| Cargo Restraint on Aircraft Passenger Seats \x96 Main Passenger Cabin | |
| Certification Considerations for Highly-Integrated or Complex Aircraft Systems | |
| Coiled Tubing - Titanium Alloy, Hydraulic Applications, Aerospace | |
| Coiled Tubing - Titanium Alloy, Hydraulic Applications | |
| Coiled Tubing \x96 Titanium Alloy, Hydraulic Applications, Aerospace | |
| Collision Avoidance System | |
| Color-Coded Incandescent Flange Base T-1 and T-1 3/4 Lamps for Voltage Identification | |
| Communications and Navigation Equipment | |
| COMPASS SYSTEM INSTALLATIONS (STABILIZED TYPE) | |
| Compass System Installations | |
| CONTROL LEVER - CONNECTIONS (60\xb0 V SERRATIONS) | |
| Control Lever Connections (60 Degree V Serrations) | |
| CONTROL LEVER CONNECTIONS (60\xb0 V SERRATIONS) | |
| Cover Shipping Flexible (Nonreuseable) | |
| Cover, Shipping and Storage (Flexible, Reusable, Water- Vaporproof) | |
| Crew Rest Container for Main Deck or Lower Deck | |
| Crew Rest Facilities | |
| Crew Safety Provisions for Cargo Aircraft | |
| Data Formats and Practices for Life Cycle Cost Information | |
| Data Link | |
| Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude) | |
| Definitions and Limits, Metal Material Defects and Surface and Edge Features, Fluid Couplings, Fittings, and Hose Ends | |
| Design and Operation of Aircraft Deicing Facilities | |
| Design Objectives for CRT Displays for Part 23 Aircraft | |
| Design Objectives for Handling Qualities of Transport Aircraft | |
| Design Objectives for Liquid Crystal Displays for Part 25 (Transport) Aircraft | |
| Design of Aircraft Deicing Facilities | |
| Design Specification for Towbarless Push-Back Tow Vehicles | |
| Design Specification for Towbarless Tow Vehicles | |
| Determination of Costs and Benefits from Implementing an Engine Health Management System | |
| DETERMINATION OF HYDRAULIC PRESSURE DROP | |
| Dimensional Compatibility of Child Restraint Systems and Passenger Seat Systems in Civil Transport Airplanes | |
| Directional Indicating System (Turbine Powered Subsonic Aircraft) | |
| Document for 270 Voltage Direct Current (270 V DC) System | |
| Drawing Interpretation and Standard Machining Practices, Couplings, Fittings and Hose Ends, Fluid Systems | |
| Drawing Interpretations, Standard Machining Practice, Tube Fittings and Connectors, Fluid Systems | |
| DRIVES - SQUARE FLANGE .600 PD SPLINE ACCESSORY | |
| Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure | |
| Electrical Actuation Systems for Aerospace and Other Applications | |
| ELECTROHYDRAULIC FLOW-CONTROL SERVOVALVES | |
| Electrohydraulic Servovalves | |
| Electromagnetic Compatibility Control Requirements Systems | |
| Electronic Data Management System (EDMS) | |
| Electronic Displays | |
| Electronic Library System (ELS) | |
| Electronic Propulsion Control/Aircraft Interface Control Documents | |
| Engine Controls by Electrical or Fiber Optic Signaling | |
| Engine Exhaust System Design Considerations for Rotorcraft | |
| Environmental Control Systems for Helicopters | |
| EQUIPMENT FRAGILITY DATA | |
| Exits and Their Operation - Air Transport Cabin Emergency | |
| EXITS AND THEIR OPERATION \x96 AIR TRANSPORT CABIN EMERGENCY | |
| External Software Loading of Electronic Engine Controls | |
| Ferrule- High Altitude Spark Plug Leads | |
| FLANGE - THERMOCOUPLE | |
| Flaring (Swaging) and Removal of Shank Nuts | |
| Flight Control Actuators - Dynamic Seals, Collection of Duty Cycle Data | |
| Flight Deck Alerting System (FAS) | |
| Flight Deck Environment | |
| Flight Deck Escape Provisions for Transport Aircraft | |
| Flight Deck Head-Up Displays | |
| Flight Deck Interior Doors for Transport Aircraft | |
| Flight Deck Layout and Facilities | |
| Flight Deck Lighting for Aircraft | |
| Flight Deck Lighting for Commercial Transport Aircraft | |
| Flight Deck Panels, Controls, and Displays | |
| Flight Deck Tire Pressure Monitoring System (TPMS) | |
| FLIGHT DECK VISUAL, AUDIBLE AND TACTILE SIGNALS | |
| FLIGHT DECK VISUAL, AUDIBLE, & TACTILE SIGNALS | |
| FLIGHT DECK VISUAL, AUDIBLE, AND TACTUAL SIGNALS | |
| Flight Deck, Head-Up Displays | |
| Flight Envelope Awareness/Protection | |
| Flight Line Grounding and Bonding of Aircraft | |
| Flight Management System (FMS) | |
| FOLDABLE ON-BOARD WHEELCHAIRS FOR PASSENGERS WITH DISABILITIES (STABILIZED TYPE) | |
| Foldable On-Board Wheelchairs for Passengers with Disabilities | |
| Full-Format Printer | |
| Gas Turbine Engine Fuel Nozzle Test Procedures | |
| Gas Turbine Engine Performance Presentation for Digital Computer Programs Using FORTRAN 77 | |
| Gas Turbine Engine Real Time Performance Model Presentation for Digital Computers | |
| GAS TURBINE ENGINE REAL TIME PERFORMANCE MODEL PRESENTATION | |
| Gland Design, Computation of Seal Squeeze and Gland Volume | |
| Ground-Plane Microphone Configuration for Propeller-Driven Light- Aircraft Noise Measurement | |
| Ground-Plane Microphone Configuration for Propeller-Driven Light-Aircraft Noise Measurement | |
| Guide for Choosing a Minimum Wall Thickness of Tubing for Use With Weld Fittings Coded for a Range of Wall Sizes | |
| Guidelines and Methods for Conducting the Safety Assessment Process on Civil Airborne Systems and Equipment | |
| Hand-Held Cabin Fire Extinguishers Transport Aircraft | |
| HELICOPTER EXTERNAL NOISE ESTIMATION | |
| Hole Contour, Fluid Passage, Tube Fitting | |
| Horsepower Correction Formulae | |
| HUB, FLANGED - SPLINE TYPE WOOD PROPELLER - #10, #20 | |
| Hub, Flanged-Spline Type Wood Propeller- #10, #20 | |
| Human Engineering Considerations in the Application of Color to Electronic Aircraft Displays | |
| Human Engineering Recommendations for Data Link Systems | |
| Human Interface Criteria for Collision Avoidance Systems in Transport Aircraft | |
| Human Interface Design Methodology for Integrated Display Symbology | |
| Induction Hardening of Steel Components | |
| Installation, Heaters, Airplane, Internal Combustion Heater Exchanger Type | |
| Instrumental Methods of Determining Surface Cleanliness | |
| Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair | |
| Isolation and Corrosion Protection of Dissimilar Materials | |
| Lavatory Smoke Detectors | |
| Leads, Shielded, High Tension, Detachable Spark Plug | |
| LEADS,SHIELED,HIGH TENSION,DETACHABLE SPARK PLUG | |
| Leakage, Requirements and Test Methods, for Fuel Couplings, Pneumatic Couplings, Hydraulic Fittings, Quick Disconnects, and Hose Assemblies | |
| Life Cycle Cost - Techniques and Applications | |
| Lighting, Aircraft Exterior, Night Vision Imaging System (NVIS) Compatible | |
| Liquid Oxygen Quantity Instruments | |
| Liquid Rocket Engine Reliability Certification | |
| LOCATION AND ACTUATION OF COCKPIT CONTROLS FOR COMMERCIAL TRANSPORT TYPE AIRCRAFT | |
| LOCATION AND ACTUATION OF FLIGHT DECK CONTROLS FOR COMMERCIAL TRANSPORT TYPE AIRCRAFT | |
| LOCATON AND ACTUATION OF FLIGHT DECK CONTROLS FOR TRANSPORT AIRCRAFT | |
| METABOLIC SIMULATOR TESTING SYSTEMS FOR AVIATION BREATHING EQUIPMENT | |
| Microwave Landing System (MLS) Receiver and MLS Area Navigation Equipment for Transport Aircraft | |
| Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Description, Acquisition, and Operation | |
| Monitoring Aircraft Noise and Operations in the Vicinity of Airports: System Validation | |
| Mount - Thermocouple | |
| Mount-Thermocouple | |
| MOUNTING PAD & FLANGE - FUEL INJECTION PUMP (12-14 CYLINDERS) | |
| MOUNTING PAD & FLANGE - FUEL INJECTION PUMP (7-9 CYLINDERS) | |
| MOUNTING PADS AND DRIVES - MOTOR OPERATED THRU SPLINE-PINION | |
| Night Vision Goggle (NVG) Compatible Light Sources | |
| Night Vision Goggle (NVG) Filters | |
| Night Vision Imaging System (NVIS) Compatible Illuminated Pushbutton Switches and Indicators | |
| Nomenclature Guide for Propulsion Systems Support Equipment | |
| NOMENCLATURE, AIRCRAFT HYDRAULIC AND PNEUMATIC SYSTEMS | |
| On Board Weight and Balance System | |
| On-Board Weight and Balance System | |
| Orientation of Engine Axis, Coordinate and Numbering Systems for Aircraft Gas Turbine Engines | |
| Overspeed Warning Instrument (Turbine Powered Subsonic Aircraft) | |
| Pallet/Container Loader Auto-Levelling Systems | |
| Passenger Reading Lights | |
| Passenger Safety Video Briefings | |
| Performance and Evaluation Criteria, Surface Defects, Requirements for | |
| Photometric and Colorimetric Measurement Procedures for Airborne Electronic Flat Panel Displays | |
| Photometric and Colorimetric Measurement Procedures for Airborne Flat Panel Displays | |
| Pilot Visibility from the Flight Deck | |
| Pilot-System Integration | |
| Placard and Marking Standards for Operation of Inflatable Slides and Slide/Rafts | |
| POSITION TERMS AND NUMBERING SYSTEM FOR AIRCRAFT GAS TURBINE ENGINES | |
| Pressure Ratio Instruments | |
| Primary Flight Controls by Electrical Signaling, Section I | |
| PROCEDURE AND METHOD FOR CONDUCTING TEST OF HYDRAULIC COMPONENTS IN CONTAMINATION CONTROLLED SYSTEM (STABLIZED TYPE) | |
| Procedure and Method for Conducting Test of Hydraulic Components in Contamination Controlled System | |
| Procedure for Inspection of Inservice Airborne Accumulators for Corrosion and Damage | |
| Procedure for Sampling and Measurement of Engine Generated Contaminants in Bleed Air Supplies from Aircraft Engines Under Normal Operating Conditions | |
| PROPELLER ATTACHMENT - NOSE MOUNTED | |
| Propeller Attachment- Nose Mounted | |
| Propeller Control Clearance - Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines | |
| Propeller Control Clearance - Single Acting System Single Rotation Propeller Shaft Reciprocating Engines | |
| Propeller Control Clearance-Dual Rotation or Double Acting System Single Rotation Propeller Shaft Reciprocating Engines | |
| Propeller Control Clearance-Single Acting System Single Rotation Propeller Shaft Reciprocating Engines | |
| Propeller Control Installation Clearance | |
| PROPELLER SHAFT ENDS, DUAL ROTATION (PROPELLER SUPPLIED BEARING) | |
| PROPELLER SHAFT TORQUE RATINGS (STABILIZED TYPE) | |
| PROPELLER SHAFT TORQUE RATINGS | |
| Quantities for Description of the Acoustical Environment of the Interior of Aircraft | |
| Recommended Brace Positions | |
| Recommended Insertion Loss Test Methods for EMI Power Line Filters | |
| Safety Considerations - Smoking in Lavatories of Transport Aircraft | |
| Safety Considerations \x97 Smoking in Lavatories of Transport Aircraft | |
| Safety Considerations of Carry-On Baggage Relating to the Emergency Evacuation of Transport Category Aircraft | |
| Safety Considerations of Food and Beverage Service Carts | |
| Seats and Restraint Systems for the Flight Deck | |
| SELECTION AND APPLICATION OF ELECTRO-MECHANICAL RELAYS FOR PROPER PERFORMANCE | |
| Selection and Application of Relays for Proper Performance | |
| SHAFTS - POWER TRANSMISSION | |
| SHOCK AND VIBRATION EVALUATION OF PACKAGING | |
| SMALL SIZE O-RINGS | |
| SPARK IGNITER GAP TYPES | |
| SPARK IGNITER OUTLINE/THREADED MOUNTING | |
| SPARK PLUG THREAD FORM DATA (60 DEG. THREAD ANGLE) | |
| SPARK PLUG THREAD FORM DATA (60 DEGREES THREAD ANGLE) | |
| SPARK PLUGS, AIRCRAFT ENGINE - 18MM | |
| Specification for Towbarless Push-Back Tow Vehicles | |
| Specification for Towbarless Tow Vehicles | |
| Standardization of Locations and Type of Aircraft Ground Service Connections | |
| Stands, Shipping and Storage, Aircraft Engines, Reusable | |
| Storage, Use, and Care of Borescopes and Fibrescopes (Flexible Borescopes) | |
| Stowage of Flight Crew's Survival Emergency and Miscellaneous Equipment | |
| Stowage of Flight Crew\xb4s Survival Emergency and Miscellaneous Equipment | |
| Suitable Test Sizes for O-Ring Specifications | |
| SWITCH, TOGGLE, LEVER LOCK TYPE - DOUBLE POLE - THREE HOLE MOUNTING | |
| SWITCH, TOGGLE, LEVER LOCK TYPE - SINGLE POLE - THREE HOLE MOUNTING | |
| SYNCHROS | |
| Temperature Measuring Devices Nomenclature | |
| Terminal Well, Low Voltage Igniter Plug | |
| TERMINAL, HIGH ALTITUDE, SOCKET CONTACT | |
| TERMINAL, HIGH ALTITUDE, VOLUTE SPRING CONTACT | |
| Terminal, Lead, Low Voltage Igniter Plug | |
| TERMINAL, WELL, HIGH ALTITUDE, PIN CONTACT | |
| Terminology and Definitions for Aerospace Fluid Power, Actuation, and Control Technologies | |
| Terminology of Dual and Coaxial Counter-Rotating Propellers | |
| Terminology of Dual, and Coaxial Counter-Rotating Propellers | |
| Testing of Airplane Installed Environmental Control Systems (ECS) | |
| Testing of Commercial Airplane Environmental Control Systems | |
| TESTING OF PROTOTYPE AIRPLANE AIR CONDITIONING SYSTEMS | |
| Titles, SAE G-3 Committee Document, Selection of | |
| Titles, SAE Subcommittee G-3A Aerospace Coupling Documents, Selection of | |
| Torque Ratings, Propeller Shaft | |
| Torsion Strength Testing of Hydraulic Tube Joints | |
| Turboshaft/Turboprop Gas Turbine Engine Test Cell Correlation | |
| Ultrasonic Thickness Testing | |
| UNIVERSAL MAINTENANCE AND OVERHAUL STAND FOR TURBO-JET (10,000 LBS. THRUST CLASS) AND TURBO-PROP ENGINES | |
| Wing Inspection Lights - Design Criteria |
| << Prev | Next >> |