Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1100
1150
1200
1250
1300
1350
1400
1410
1420
1430
1440
1450
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1470
1480
1490
1500
1510
1520
1550
1600
1620
| Product Name | Notes |
|---|---|
| 21 CFR Subchapter J to IEC Comparison Table for Medical X-Ray Imaging Devices Mammography | |
|
ADDENDA TO ASME/ANSI RTP-1-1989 REINFORCED THERMOSET PLASTIC CORROSION RESISTANT EQUIPMENT -- RTP-1A
|
ADDENDA TO ASME/ANSI RTP-1-1989 REINFORCED THERMOSET PLASTIC CORROSION RESISTANT EQUIPMENT |
| Addenda to RTP-1:1995 Reinforced Thermoset Plastic Corrosion Resistant Equipment | |
| Admission of academia, universities and their associated research establishments to participate in the work of ITU-T | |
| Admission of entities or organizations to participate as Associates in the work of ITU-T | |
| Admission of Sector Members from developing countries in the work of ITU-T | |
| Aerodynamic Decelerator and Parachute Drawings | |
| AIR EMISSIONS BANKING AND TRADING: ANALYSIS AND IMPLICATIONS FOR WETLAND MITIGATION BANKING | |
| Air Pollution: Measurement, Modelling and Mitigation | |
| Allowable error performance for a satellite hypothetical reference digital path operating below 15 GHz | |
| Alternative calling procedures on international telecommunication networks | |
| Alternative Materials for the Manufacture of Metric Swaged Pipe Couplings | |
| American National Standard Electroacoustics \x96 Octave-band and Fractional-octave-ba nd Filters \x96 Part 1: Specifications (a nationally adopted international standard) | |
| AMERICAN NATIONAL STANDARD Electroacoustics \x96 Octave-band and Fractional-octave-ba nd Filters \x96 Part 2: Pattern-evaluation Tests (a nationally adopted international standard) | |
| AMERICAN NATIONAL STANDARD Electroacoustics \x96 Octave-band and Fractional-octave-ba nd Filters \x96 Part 3: Periodic Tests (a nationally adopted international standard) | |
| American National Standard Measurement Microphones - Part 1: Specifications for Laboratory Standard Microphones | |
| American National Standard Measurement Microphones \x96 Part 2: Primary Method for Pressure Calibration of Laboratory Standard Microphones by the Reciprocity Technique | |
| American National Standard Measurement of Sound Pressure Levels in Air | |
| American National Standard Method for Measuring the Performance of Noise Discriminating and Noise Canceling Microphones | |
| American National Standard Microphone Windscreens \x96 Part 1: Test Procedures for Measurements of Insertion Loss in Still Air | |
| American National Standard Specification for Octave-Band and Fractional-Octave-Ba nd Analog and Digital Filters | |
| American National Standard Specifications for Laboratory Standard Microphones | |
| American National Standard Template Method for Ground Impedance | |
| Annular Projection Welding of Tubular Sections to Low Carbon Steel Sheet | |
| Application and Installation Guidelines for Armored Cable and Metal-Clad Cable | |
| APPLICATION AND INSTALLATION GUIDELINES FOR FLEXIBLE AND LIQUIDTIGHT FLEXIBLE METAL CONDUITS | |
| Application and Installation Guidelines for Nonmetallic-Sheathed Cables | |
| APPLICATION GUIDELINES FOR SERVICE-ENTRANCE CABLE | |
| Application of an alternative approval procedure (AAP) for Recommendations | |
| Application of Locating Pins | |
| Application of Self Adhesive External Markers | |
| Application of Self Locking Nut Retainers | |
| Appointment and maximum term of office for chairmen and vice-chairmen of ITU-T study groups and of TSAG | |
| Appointment and maximum term of office for Chairmen and Vice-Chairmen of Radiocommunication Study Groups, the Coordination Committee for Vocabulary and of the Radiocommunication Advisory Group | |
| Appointment and maximum term of office for Chairmen and Vice-Chairmen of Radiocommunication Study Groups | |
| Assessment of Experimental Uncertainty with Application to Wind Tunnel Testing | |
| Assistance to regional groups of Study Group 3 | |
| Authorization for TSAG to act between WTSAs | |
| BIOS Instant Notes in Neuroscience | |
| Bridging the standardization gap between developing and developed countries | |
| British Metric Swaged Pipe Coupling (AS 43020 and AS 43090 Series) Designer's Guide | |
| British Metric Swaged Pipe Coupling (AS 43020 and AS 43090 Series) Summary of Tests | |
| BROADBAND AERIAL SERVICE WIRE AIRCORE, POLYOLEFIN INSULATED, COPPER CONDUCTORS | |
| BROADBAND BURIED SERVICE WIRE FILLED, POLYOLEFIN INSULATED, COPPER CONDUCTORS | |
| BROADBAND BURIED SERVICE WIRE, FILLED, POLYOLEFIN INSULATED, COPPER CONDUCTOR | |
| Broadcasting in the 26 MHz Band | |
| Building Acoustics | |
| Building Performance Simulation for Design and Operation | |
| Cable Terminal | |
| CAD/CAE in the Construction Industry | |
| Calling party number delivery | |
| Cancellation of the AGS4719/20 and AS46788/89/90/91 (MBC\x99) Rivets | |
| Capability-based mission assurance program - General requirements | |
| CATEGORY 3 INDIVIDUALLY UNSHIELDED TWISTED PAIR INDOOR CABLE FOR USE IN GENERAL PURPOSE NON-LAN TELECOMMUNICATION WIRING SYSTEMS TECHNICAL REQUIREMENTS | |
| Category 6 Individually Unshielded Twisted Pair Indoor Cables ( With or Without an Overall Shield) For use in Communications Wiring Systems Technical Requirements | |
| Characterization of the Performance of Illuminance Meters and Luminance Meters | |
| CIE standard colorimetric observers | |
| CIE Standard Illuminants for Colorimetry | |
| CIE System for Metrology of Optical Radiation for ipRGC-Influenced Responses to Light | |
| Collaboration with the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC) | |
| Collaboration with the Postal Operations Council (POC) of the Universal Postal Union (UPU) in the study of services concerning both the postal and the telecommunication sectors | |
| Colorimetry - Part 2: CIE Standard Illuminants | |
| Colorimetry - Part 3: CIE Tristimulus Values | |
| Colorimetry - Part 4: CIE 1976 L*a*b* Colour Space | |
| Colorimetry \x96 Part 6: CIEDE2000 Colour-Difference Formula | |
| Colorimetry \x97 Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram | |
| Colours of Light Signals | |
| Commercial Launch Safety | |
| Compatibility between radiocommunication systems and high data rate telecommunication systems using electricity power supply or telephone distribution wiring | |
| Compatibility between the fixed-satellite service and the space science services in the band 13.75-14 GHz | |
| Component Tapped Hole Geometry (for use with Swaged Coupling Male Nut Units ref AS43020 & 43090) | |
| Computer programs and associated reference numerical data for radiowave propagation studies | |
| Concepts and Methods of Schedule Compression | |
| Conference Preparatory Meeting | |
| Connection, Threaded, Geometry for Low Pressure Corrugated Hose | |
| Connector Specifications Identification System | |
| Contractor Planning for Fixed-Price Construction | |
| Cooperation and Harmonization in the Future Activities of the Radiocommunication (ITU-R) and Telecommunication Standardization (ITU-T) Sectors | |
| Cooperation with the International Special Committee on Radio Interference | |
| Coordination among ITU-T, ITU-R and ITU-D for activities relating to IMT | |
| Coordination of vocabulary | |
| Costs and Benefits of Materials Management Systems | |
| Countering and combating spam | |
| Country code top-level domain names | |
| Creation of a Standardization Committee for Vocabulary | |
| Creation of regional groups | |
| Criteria for Explosive Systems and Devices on Space and Launch Vehicles | |
| Criteria for sharing between BSS feeder links and other Earth-to-space or space-to-Earth links of the FSS | |
| CTI Multi-Agency Testing Committee Wet Bulb Instrument Investigation Summary White Paper | |
| Cybersecurity | |
| Data Bank of HF Sky-Wave Signal Intensity Measurements | |
| Decimal Marker | |
| Development of an upgraded spectrum management system | |
| DIRECTIONS FOR APPLICATION OF P.T.F.E. IMPREGNATED MARKER TAPE | |
| Dispute settlement | |
| Dissemination of ITU-R texts | |
| Documentation of Time Transmissions | |
| Drop test fail criterion (Ruling to AS/NZS 60079.29.1:2008) | |
| Durability of Building Sealants | |
| Effect of Zinc Coatings on Resistance Seam Welding of Sheet Steel | |
| Effective coordination of standardization work across study groups in ITU-T and the role of TSAG | |
| Electrical and Metallurgical Characteristics of Mash Seam Welds | |
| ELECTRONIC SPECTRUM MANAGEMENT INFORMATION EXCHANGE | |
| Emergency Lighting | |
| Encourage the creation of national computer incident response teams, particularly for developing countries | |
| End Socket Cable | |
| Enhancing participation of telecommunication operators from developing countries | |
| ENUM | |
| Environmental Protection of the Geostationary-Satell ite Orbit | |
| EQUIPMENT INTERCONNECTION IN PROFESSIONAL PROGRAMME PRODUCTION INSTALLATIONS | |
| Erythema Reference Action Spectrum and Standard Erythema Dose | |
| Establishment of a workshop and seminar coordination group | |
| Evaluation of Design Effectiveness | |
| Extension of the International Monitoring System to a worldwide scale | |
| External Markers - Definition of Sizes | |
| EXTRUDED INSULATION POWER CABLES RATED ABOVE 46 THROUGH 345 KV | |
| Extruded Insulation Power Cables Rated Above 46 Through 500 KV AC | |
| FASTENERS, ROLLED THREADS, CHAMFERS, LEAD THREADS & RUNOUTS | |
| FEED WATER, BOILER WATER AND STEAM QUALITY FOR POWER PLANTS/INDUSTRIAL PLANTS | |
| Fixed-satellite and radiolocation/radion avigation services sharing in the band 13.75-14 GHz | |
| Flash Welding - the Process and Applications and Flash Welding - Process Variables and Weld Properties | |
| Forgins, Tolerances and Surface Condition | |
| Further development of the Spectrum Management System for Developing Countries | |
| FURTHER STUDIES CONCERNING UNWANTED EMISSIONS | |
| Future submission of satellite radio transmission technologies for IMT-2000 | |
| FUTURE USE OF THE GLOBAL NAVIGATION SATELLITE SYSTEM (GNSS) FOR HIGH-PRECISION TIME TRANSFER | |
| Gating Interface | |
| General Requirements for A.S. and A.G.S. Parts | |
| Groove Dimensions for Gaskets (Metallic Seals) | |
| GUIDELINE TO MITIGATE HAZARDS FOR SMALL PRESSURE RELIEF VALVES THAT FAIL TO OPEN AT SET PRESSURE (CRACKING PRESSURES LESS THAN 100 PSI) | |
| Guidelines for ITU-T strategic activities | |
| Guidelines for Study Group Questions | |
| Guidelines for the preparation of terms and definitions | |
| Guidelines for the selection of terms and preparation of definitions | |
| Handbooks and special publications for development of radiocommunication services | |
| Harmonization of Activities for Future Mobile Communications | |
| HF FIELD-STRENGTH MEASUREMENT CAMPAIGN | |
| Hole Sizes for Self Retaining \x93Impedance Type\x94 Bolts. Inch Series | |
| Hole Sizes for Self Retaining \x93Impedance Type\x94 Bolts. Metric Series | |
| Hole sizes for Solid Rivets | |
| ILV: International Lighting Vocabulary \x96 Supplement 1: Light Emitting Diodes (LEDs) and LED Assemblies \x96 Terms and Definitions | |
| ILV: International Lighting Vocabulary | |
| Implementation of Resolution 122 (Rev. Antalya, 2006) on the evolving role of the World Telecommunication Standardization Assembly | |
| Improvement of national radio spectrum management practices and techniques | |
| INDOOR-OUTDOOR OPTICAL FIBER CABLE | |
| Information and communication technologies and climate change | |
| Input Variables Impacting Design Effectiveness | |
| Insert, Screw Thread, Metric, Helical Coil - Tang & Notch details | |
| Insert, Screw Thread, Unified, Helical Coil - Tang & Notch Details | |
| Installation Information for Rivet Blind AGS 3920 to 3923 | |
| Integration of International Mobile Telecommunications (IMT-2000 and IMT-Advanced) with existing networks | |
| Integration of International Mobile Telecommunications-2 000 (IMT-2000) and systems beyond with existing networks | |
| International Standard Global Solar UV Index | |
| International Telegraph Alphabet No. 2 - Telegraphy - Alphabetical Telegraph Terminal Equipment (Study Group IX) 7 pp | |
| Internationalized (multilingual) domain names | |
| IP address allocation and encouraging the deployment of IPv6 | |
| ITU-T study group responsibility and mandates | |
| ITU-T's contribution in implementing the outcomes of the World Summit on the Information Society, and the establishment of a Dedicated Group on Internetrelated Public Policy Issues as an integral part... | |
| Legend Markers - Self Adhesive | |
| Liaison and collaboration with other organizations | |
| Liaison and collaboration with other relevant organizations, in particular ISO and IEC | |
| Liaison and collaboration with the ITU Telecommunication Standardization Sector | |
| Lighting of Indoor Work Places | |
| Lighting of Outdoor Work Places - Lighting Requirements for Safety and Security | |
| Lighting of Outdoor Work Places | |
| Liquid Vapor Phase Change Phenomena: An Introduction to the Thermophysics of Vaporization and Condensation Processes in Heat Transfer Equipment | |
| Low Earth Orbit Spacecraft Charging Design Standard Requirement and Associated Handbook | |
| Mainstreaming gender in ITU-T activities | |
| Maintenance Manual for Resistance Welding Machines | |
| Management of Project Risks and Uncertainties | |
| Manufacturer's Cross References of Standard Resistance Welding Electrode Numbers and Alloys | |
| Measurement concerns related to human exposure to electromagnetic fields | |
| MEASUREMENT OF NOISE EMITTED BY POWERTRAIN COMPONENT | |
| MEASUREMENTS AND AVALIATION OF THE INTERNAL NOISE EMITTED BY IN TANK FUEL PUMPS | |
| Metal Finish Seam Welding | |
| Metric Thread Insert - Wire Section | |
| Minimum Clearance around Hydraulic Lubricating Nipples | |
| Minimum effective Wrench Pad Heights for Double Hexagon Fasteners | |
| Misappropriation of international telecommunication numbering resources | |
| Model Planning and Controlling System for EPC of Industrial Projects | |
| Modifying Single-Hull Tankers: Costs and Benefits | |
| Mohr Circles, Stress Paths and Geotechnics | |
| Moving Mechanical Assemblies for Space and Launch Vehicles | |
| MULTI-DWELLING UNIT (MDU) OPTICAL FIBER CABLE | |
| Network architecture and equipment functional aspects of digital satellite systems in the fixed-satellite service forming part of synchronous digital hierarchy transport networks | |
| Non-discriminatory access and use of Internet resources | |
| Observations Needed to Provide Basic Indices for Ionospheric Propagation | |
| OPTICAL FIBER CABLE FOR PLACEMENT IN SEWER ENVIRONMENTS | |
| Optical Fiber Drop Cable | |
| Orbit Management Techniques for the Fixed-Satellite Service | |
| ORGANIZATION AND PROCEDUURES FOR THE COMMITTEE ON STANDARDIZATION OF OILFIELD EQUIPMENT AND MATERIALS: POLICY DOCUMENT: HTTPS://WWW.API.ORG/ PRODUCTS-AND-SERVICE S/STANDARDS/PROGRAM- INFORMATION/ POLICIES-AND-PROCEDU RES | |
| Organizations Qualified to Set Standards on Sound and Television Recording | |
| Paint Container Label | |
| PERFORMANCE BASED STANDARD FOR ELECTRIC UTILITY EXTRUDED DIELECTRIC SHIELDED POWER CABLES RATED 5 THROUGH 46 KV | |
| Performance-Based Anomaly Detection and Response Analysis | |
| Performance-Based Failure Reporting, Analysis & Corrective Action System (FRACAS) Requirements | |
| Performance-Based Failure Review Board (FRB) Requirements | |
| Performance-Based Fault Tree Analysis Requirements | |
| Performance-Based Product Failure Mode, Effects and Criticality Analysis (FMECA) Requirements | |
| Performance-Based Sneak Circuit Analysis (SCA) Requirements | |
| Performance-Based System Reliability Modeling Requirements | |
| Photobiological Safety of Lamps and Lamp Systems | |
| Photocarcinogenesis Action Spectrum (Non-Melanoma Skin Cancers) | |
| PHOTOMETRY - THE CIE SYSTEM OF PHYSICAL PHOTOMETRY | |
| Photometry of road illumination devices, light-signalling devices and retroreflective devices for road vehicles | |
| Pipe Couplings, Unified Threads, Thrust Wire Nuts - Assembly & Tube Couplings - Unified Threads Editi | |
| Planning and Design of Engineering Systems | |
| Planning Construction Activity to Support the Startup Process | |
| Pointing Accuracy as a Design Objective for Earthward Antennas on Board Geostationary Satellites in the Fixed-Satellite Service | |
| POWER FLUX-DENSITY VALUES TO FACILITATE THE APPLICATION OF RR ARTICLE 14 FOR THE FSS IN REGION 2 IN RELATION TO THE BSS IN THE BAND 11.7-12.2 GHz | |
| Practical Expression of Aerospace System Pressures | |
| Predicting Outdoor Sound | |
| Preferred Radio-Frequency Channel Arrangements for Radio-Relay Links for International Connections | |
| Preparation of texts on terminology | |
| Presentation of texts on terminology | |
| PRESERVATION OF POWER PLANTS | |
| Principles and procedures for the allocation of work to, and coordination between, ITU-R and ITU-T | |
| Procedures for allocation and management of international telecommunication numbering, naming, addressing and identification resources | |
| Project Control for Construction | |
| Project Materials Management Primer | |
| Projection Welding Low Carbon Steel Using Embossed Projects | |
| Property Asset Management | |
| Qualification and Quality Requirements for Electrical Components on Space Solar Panels \x96 Amendment 1 | |
| Qualification and Quality Requirements for Electrical Components on Space Solar Panels | |
| Qualification and Quality Requirements for Space Solar Cells \x96 Amendment 1 | |
| Qualification and Quality Requirements for Space Solar Cells | |
| Qualification and Quality Requirements for Space Solar Panels | |
| Quickie Reference Welding Manual | |
| R\xe8gles de Surveillance en Exploitation des Mat\xe9riels M\xe9caniques des Ilots Nucl\xe9aires REP | |
| Radiation therapy machine characterization | |
| Radiation therapy readiness check | |
| RADIOCOMMUNICATION SECTOR FOLLOW-UP TO THE COUNCIL DECISIONS CONCERNING THE ITU-2000 GROUP RECOMMENDATIONS | |
| Radiowave propagation studies and measurement campaigns in developing countries | |
| Radiowave propagation studies for system design and service planning | |
| Recommended Diameters & Thickness for Meta Tube - Metric Series | |
| Recommended Diameters for Wire in the Metric Series | |
| Recommended Safety Practices for Fall Protection and Working at Heights at Fueling Facilities | |
| Recommended Size & Location of Locking Wire Holes in Bolts, Screws & Nuts | |
| Recommended Thicknesses for Sheet Metal in the Metric Series | |
| Regional preparations for WTSAs | |
| Regulatory aspects of ITU-T work | |
| REINFORCED THERMOSET PLASTIC CORROSION RESISTANT EQUIPMENT; SPECIAL NOTICE - DECEMBER 1990 | |
| Removal of Incomplete Threads | |
| Resistance Seam Welding of Terne Plate Evaluation of Resistance Seam Welds by a Shear Peel Test High Speed Seam Welding of Terne Plate | |
| Resistance Welding Control Standard | |
| Resistance Welding Equipment Standards | |
| Resistance Welding Manual | |
| Resistance Welding of Copper and Copper Base Alloys | |
| Resistance Welding of Miscellaneous and Dissimilar Metals | |
| Resistance Welding of Stainless and High-Alloy Steels | |
| Resistance Welding Pocket Handbook | |
| RESOLUTIONS RADIOCOMMUNICATION ASSEMBLY (RA-07) GENEVA, 15-19 OCTOBER 2007 | |
| Responding to the challenges of the evolution of the numbering system and its convergence with IP-based systems/networks | |
| Ring Spanner - Wrench - Configuration and Ring Envelope | |
| RISER CABLES TECHNICAL REQUIREMENTS | |
| Risk Watch Natural Disasters Curriculum Set | |
| Rivet Tails | |
| Road Traffic Lights - Photometric Properties of 200 mm Roundel Signals | |
| Roadside Design Guide with Chapter Six Update | |
| ROADSIDE DESIGN GUIDE | |
| Rockets Of The World 2004 Supplement | |
| Role of the Radiocommunication Sector in the ongoing development of IMT | |
| Roles of TSAG and ITU-T study group vice-chairmen from developing countries | |
| Routine ionospheric sounding | |
| Rubber and Plastics Hoses - Determination of Ultra-Violet Resistance Under Static Conditions First Edition; (CEN EN ISO 8580: 1995) | |
| Rubber Hoses and Hose Assemblies - Rubber-Covered, Spiral Wire Reinforced, Hydraulic Type - Specification Second Edition; (NZS/ISO 3862: 1991) | |
| Rubidium \x96 Oral Risk Assessment CAS # 7440-17-7 | |
| Rubidium CAS # 7440-17-7 ORAL RISK ASSESSMENT DOCUMENT | |
| Rules of procedure of the ITU Telecommunication Standardization Sector (ITU-T) | |
| Rulings to AS/NZS 3260:1993 - Approval and test specification - Safety of information technology equipment including electrical business equipment | |
| Rulings to design of structures and testing standards | |
| Rulings to fire protection Standards Ruling 1: Degrees of protection (Ruling to AS 7240.2\x972004) | |
| Rulings to lift Standards | |
| Rulings to metal Standards, Ruling 1: Cathodic protection interference levels (Ruling to AS 2832.1-2004) | |
| Rulings to National Plumbing and Drainage Code (AS 3500) | |
| Rulings to Pipelines - Gas and liquid petroleum Standards, Ruling 1: Application of welding Standard (Ruling to AS 2885.1 - 2012) | |
| Rulings to plumbing and piping systems Standards - Introduction and list of rulings | |
| Rulings to plumbing and piping systems Standards, Ruling 10: Minimum thickness for thermal insulation (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 11: DN 80 stack with the top section graded installed in a Class 1 to 4 building (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 12: Drains in landslip areas (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 13: Drains in landslip areas (Ruling to AS 3500.3-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 14: Cooling towers (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 15: Graded discharge pipes (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 16: Sanitary fixtures delivery temperature (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 17: Installation (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 18: Unconcealed storage water containers (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 19: Layout and size (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 1: Installation of backflow prevention devices (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 20: Size of drainage vents (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 21: Size and material (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 22: Size and material and installation (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 23: Tundish drain lines (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 24: Thermostatic mixing valves (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 25: Table 4.1 (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 26: Local authority water supply to properties with treatment plants (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 27: General design requirements for sanitary plumbing systems (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 28: Materials and products (UPVC) (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 29: Materials and products (PE-X) (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 2: Baths (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 30: Connection points for short-term sites (Ruling to AS/NZS 3500.2.2-1996) | |
| Rulings to plumbing and piping systems Standards, Ruling 31: Location of piping in concrete (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 32: Sanitary fixtures delivery temperature (Ruling to AS/NZS 3500.4.2:1997) | |
| Rulings to plumbing and piping systems Standards, Ruling 33: Encasing high-density polyethylene (HDPE) in concrete (Ruling to AS/NZS 3500.2.2:1996) | |
| Rulings to plumbing and piping systems Standards, Ruling 34: Polypropylene piping type (PP-R) (Ruling to AS/NZS 3500.1.2-1998) | |
| Rulings to plumbing and piping systems Standards, Ruling 35: Polypropylene random co-polymer (PP-R) pipe (Ruling to AS/NZS 3500.1.2:1998) | |
| Rulings to plumbing and piping systems Standards, Ruling 36: Heated water temperature control (Legionella) (Ruling to AS/NZS 3500.4:2003) | |
| Rulings to plumbing and piping systems Standards, Ruling 3: Terminal fittings (Ruling to AS 3500.4-1994) | |
| Rulings to plumbing and piping systems Standards, Ruling 4: Water storage and break tanks (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 5: Installation of cisterns (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 6: Upstream vent (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 7: Upstream vent (Ruling to AS 3500.2-1990) | |
| Rulings to plumbing and piping systems Standards, Ruling 8: External hose taps (Ruling to AS 3500.1-1992) | |
| Rulings to plumbing and piping systems Standards, Ruling 9: Copper pipes and copper fittings (Ruling to AS 3500.2-1990) | |
| Rulings to pressure equipment Standards - Part 0: Introduction and list of rulings | |
| Rulings to pressure equipment Standards - Ruling 12: Minimum nominal thickness of pressure parts (AS 1210-1997) | |
| Rulings to pressure equipment Standards - Ruling 13: Specified minimum tensile strength of steel for buried and mounded storage vessels (AS 1210-1997) | |
| Rulings to pressure equipment Standards - Ruling 1: Retention of backing strips in logitudinal joints in refrigeration vessels (Ruling to AS 1210) | |
| Rulings to pressure equipment Standards - Ruling 2: Nonconforming longitudinal joints in refrigeration vessels (Ruling to AS 1210) | |
| Rulings to pressure equipment Standards - Ruling 3: Internally fitted doors for beer tanks (Ruling to AS 1210) | |
| Rulings to pressure equipment Standards - Ruling 4: Pressure containers for paint (Ruling to AS 1210) | |
| Rulings to pressure equipment Standards - Ruling 8: Seamless copper pipe joined by brazing (Ruling to AS 4041) | |
| Rulings to pressure equipment Standards - Ruling 9: Design of pressure equipment using steel having bilateral thickness tolerances (Ruling to AS 1210 and AS 1548) | |
| Rulings to pressure equipment Standards, Ruling 10: Advanced design vessels - Use of joggled joints (Ruling to AS 1210 Supplement 1-1990) | |
| Rulings to pressure equipment Standards, Ruling 11: Advanced design vessels - Design strength valves (Ruling to AS 1210 Supplement 1-1990) | |
| Rulings to pressure equipment Standards, Ruling 14: Design strength for stainless steel materials (Ruling to AS 1210-1997) | |
| Rulings to pressure equipment Standards, Ruling 5: Sugar processing vacuum pans and evaporators - Tubeplate design and tube fixing (Ruling to AS 1210) | |
| Rulings to pressure equipment Standards, Ruling 6: Fusion-welded chlorine transport drums (Ruling to AS 1210) | |
| Rulings to pressure equipment Standards, Ruling 7: Small safety valves (Ruling to AS 1271) | |
| Rulings to protective footwear Standards - Ruling 1: Uppers (Ruling to AS/NZS 2210.2:2000) | |
| Rulings to protective footwear Standards - Ruling 2: Flame resistance (Ruling to AS/NZS 4821(Int):2002) | |
| Rulings to safety of toys Standards-Small parts (Ruling to AS/NZS ISO 8124.1:2010) | |
| Rulings to the lift standards - Update No.1 1996 | |
| Rulings to the Lift Standards | |
| Rulings to the pressure equipment Standards | |
| Rulings to ventilation and airconditioning Standards, Ruling 1: Use of discharge damper latching devices (Ruling to AS/NZS 1668.1:1998) | |
| Russian - Scale Data CD-ROM | |
| Rust Essentials | |
| RWVID Introduction to Resistance Welding DVD | |
| SAFETY RELIEF STANDARDS PART 1\x97CYLINDERS FOR COMPRESSED GASES | |
| Safety Standard for Strollers and Carriages | |
| Safety Standard for Structural Requirements for Heavy Rail Transit Vehicles | |
| Safety Standard for Structural Requirements for Light Rail Vehicles | |
| SAMPLING AND PHYSICO-CHEMICAL MONITORING OF WATER AND STEAM CYCLES | |
| Seam Welding Galvanized Steel | |
| Seam Welding Low-Carbon Steel and Seam Welding Dissimilar Thicknesses of Low-Carbon Steel | |
| Selected Aerospace Diameter-Pitch Combinations of Metric 60\xb0 Screw Threads for Nuts and Bolts | |
| Selection of Cotter Pins - Metric | |
| Shaft & Groove Dimensions for Ring, Retaining (Friction Locking) | |
| Shaft Dimensions and Data for Nut, Plan, Round | |
| Sharing between the Inter-Satellite Service Involving Geostationary Satellites in the Fixed-Satellite Service and the Radionavigation Service at 33 GHz | |
| Software programs for radio-frequency spectrum management | |
| Space Systems - Composite Overwrapped Pressure Vessels (COPVs) | |
| Space Systems - Composite Overwrapped Pressure Vessels | |
| Space Systems - Metallic Pressure Vessels, Pressurized Structures, and Pressure Components | |
| Space Systems Flywheel Rotor Assemblies | |
| Space Systems Structures, Structural Components, and Structural Assemblies | |
| Space Systems Verification Program and Management Process | |
| Spatial Distribution of Daylight - CIE Standard General Sky | |
| SPECIFICATION FOR AECMA 1000D | |
| Spectrum Requirements of Meteorological Aids in the Frequency Range from 400.15 to 406 MHz | |
| Spot Welding 65-35 Brass on Single-Phase Equipment with Slope Control | |
| Spot Welding of Inconel "X" in Thickness Range of .032" to .188" | |
| Spot Welding of Magnesium with Three-Phase Low Frequency Equipment | |
| Spring Clips and Bushes for use with Rigid Tubes | |
| STANDARD ASSESSMENT OF EXPERIMENTAL UNCERTAINLY WITH APPLICATION TO WIND TUNNEL TESTING | |
| Standard for 600 Volt Single Layer Thermoset Insulated Utility Underground Distribution Cables | |
| STANDARD FOR BROADBAND AERIAL SERVICE WIRE AIRCORE, POLYOLEFIN INSULATED, COPPER CONDUCTORS TECHNICAL REQUIREMENTS | |
| Standard for Broadband Aerial Service Wire, Aircore, Polyolefin Insulated, Copper Conductor | |
| STANDARD FOR BROADBAND BURIED SERVICE WIRE FILLED, POLYOLEFIN INSULATED, COPPER CONDUCTORS TECHNICAL REQUIREMENTS | |
| Standard for Category 8 Cable | |
| Standard for Distribution Frame-Wire Technical Requirements | |
| STANDARD FOR INSPECTION AND CORRECT INSTALLATION OF INTERNAL RELIEF DEVICE ELBOWS IN TUBES | |
| Standard Method of Assessing the Spectral Quality of Daylight Simulators for Visual Appraisal and Measurement of Colour | |
| Standard Servicing Earth Bolt (Ground Contact) | |
| Standard Terminology for Space Structures | |
| Standard Vocabulary for Space Automation and Robotics | |
| Standard-frequency and time-signal emissions | |
| Static Control Bags | |
| Strengthening coordination and cooperation among ITU-R, ITU-T and ITU-D on matters of mutual interest | |
| Strengthening electronic working methods for the work of ITU-T | |
| Strengthening the regional presence in the Radiocommunication Study Group work | |
| Structural Analysis: A Unified Classical and Matrix Approach | |
| Structure of Radiocommunication Study Groups | |
| Studies regarding nomadic telecommunication services and applications | |
| Studies related to conformance and interoperability testing, assistance to developing countries, and a possible future ITU Mark programme | |
| Study of Digital Techniques by CCIR Study Groups and the CMTT | |
| Study of regulatory/procedura l matters | |
| STUDY OF REGULATORY/PROCEDURA L MATTTERS | |
| Subjective Assessment of the Quality of Television Pictures | |
| Symmetric Square Channel Extrusions | |
| Tapped Hole & Counterbore Details for Thinwall Inch Threaded Inserts - Long and Short Series | |
| Tapped Hole and Fitted Size Data for Helical Coil Wire Thread Inserts (Metric) | |
| Technical criteria to be used in examinations relating to the probability of harmful interference between frequency assignments in the fixed-satellite service as required in No. S11.32A.1 of the Radio Regulations... | |
| Telecommunication development including liaison and collaboration with the ITU Telecommunication Development Sector | |
| Telecommunication standardization in relation to the interests of developing countries | |
| Telecommunication/in formation and communication technology accessibility for persons with disabilities | |
| Telecommunications Station Wire for Indoor/Outdoor Use Thermoplastic Insulated and Jacketed Technical Requirements | |
| Test Method for LED Lamps, LED Luminaires and LED Modules | |
| Test Method for OLED Luminaires and OLED Light Sources | |
| The Behaviour and Design of Steel Structures to EC3 | |
| The coordination of vocabulary and related subjects | |
| The Cost Impacts of a Carbon Tax on U.S. Manufacturing Industries and Other Sectors | |
| The creation of a technology watch function in the Telecommunication Standardization Bureau | |
| The organization of vocabulary work covering terms and definitions | |
| The organization of vocabulary work | |
| The Protection of Electrostatic Discharge Susceptible Items Wrist Straps | |
| The Sponsor System | |
| The Wire Locking of Threaded Items | |
| Thermal endurance test (Ruling to AS/NZS 60079.0) | |
| THERMOPLASTIC INSULATED AND JACKETED TELECOMMUNICATIONS STATION WIRE FOR INDOOR/OUTDOOR USE TECHNICAL REQUIREMENTS | |
| THERMOPLASTIC INSULATED AND JACKETED TELECOMMUNICATIONS STATION WIRE FOR INDOOR/OUTDOOR USE | |
| Time and Frequency Transfer Using Digital Telecommunication Networks | |
| Time scale based on pulsar timing | |
| Tip-Life Studies in the Spot Welding of 5052 Aluminum Alloy | |
| Tolerances for High Performance Austenitic Steel Piping (Tubing) Metric in the Softened Condition | |
| TRANSMISSION AT REDUCED CHARACTER TRANSFER RATE OVER A STANDARDIZED 50-BAUD TELEGRAPH CHANNEL | |
| Tube Couplings - Unified Threads, Self-Locking Nuts | |
| Updating of certain maintained CCIR/ITU-R Recommendations | |
| Urban Drainage | |
| USE OF START - STOP REPERFORATING EQUIPMENT FOR PERFORATED TAPE RETRANSMISSION | |
| Use of Systems in the Fixed-Satellite Service in the Event of Natural Disasters and Similar Emergencies for Warning and Relief Operations | |
| USER GUIDE FOR SAE ITC MANUFACTURING ROUTE (FLOW CHART) | |
| Utilization of fade countermeasure strategies and techniques in the fixed-satellite service | |
| Vehicle Headlighting Systems Photometric Performance - Method of Assessment | |
| Voluntary contributions | |
| WAYS OF REDUCING THE INTERFERENCE FROM THE BROADCASTING-SATELLI TE SERVICE INTO THE FIXED-SATELLITE SERVICE IN ADJACENT FREQUENCY BANDS AROUND 12 GHz | |
| WAYS OF REDUCING THE INTERFERENCE FROM THE BROADCASTING-SATELLI TE SERVICE OF ONE REGION INTO THE FIXED-SATELLITE SERVICE OF ANOTHER REGION AROUND 12 GHz | |
| Work Packaging for Project Control | |
| Work programme and Questions of Radiocommunication Study Groups | |
| Work programme of Radiocommunication Study Groups | |
| Working methods for the Radiocommunication Assembly, the Radiocommunication Study Groups, and the Radiocommunication Advisory Group | |
| World Atlas of Ground Conductivities | |
| Worldwide databases of terrain height and surface features | |
| Wrenching Configuration Double Hexagon (12 point) for Threaded Fasteners |
| << Prev | Next >> |