AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - Test method for adhesives for floor and wall coverings - Shear creep test | |
| Adhesives - Test method for adhesives for plastic or rubber floor coverings or wall coverings - Determination of dimensional changes after accelerated ageing | |
| Adhesives - Test methods for adhesives for floor coverings and wall coverings - Determination of dimensional changes of a linoleum floor covering in contact with an adhesive | |
| Adhesives for paper and board, packaging and disposable sanitary products - 180° - "T" peel test for a flexible-to-flexible assembly | |
| Adhesives for paper and board, packaging and disposable sanitary products - 180°-"T" peel test for a flexible-to-flexible assembly | |
| ADHESIVES FOR PAPPER AND BOARD, PACKAGING AND DISPOSABLE SANITARY PRODUCTS . DETERMINATION OF TENSILE STRENGTH AND ELONGATION. | |
| ADHESIVES. TEST METHOD FOR ADHESIVES FOR FLOOR COVERINGS AND WALL COVERINGS. SHEAR CREEP TEST. | |
| ADHESIVES. TEST METHOD FOR ADHESIVES FOR PLASTIC OR RUBBER FLOOR COVERINGS OR WALL COVERINGS. DETERMINATION OF DIMENSIONAL CHANGES AFTER ACCELERATED AGEING | |
| Adjustable beds for disabled persons - Requirements and test methods | |
| ADJUSTABLE BEDS FOR DISABLED PERSONS. REQUIREMENTS AND TEST METHODS. | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature in air at atmospheric pressure - Determination of tensile properties (Endorsed by AENOR in June of 2005.) | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of shear strength by compression loading of notched specimens (Endorsed by AENOR in... | |
| Advanced technical ceramics - Mechanical properties of ceramic composites at high temperature under inert atmosphere - Determination of tensile properties (Endorsed by AENOR in June of 2005.) | |
| Agricultural machinery - Trailers - Safety | |
| AGRICULTURAL MACHINERY - TRAILERS WITH TIPPING BODY - SAFETY. | |
| Agricultural machinery - Trailers with tipping body - Safety | |
| Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements (Endorsed by AENOR in May of 2009.) | |
| Aircraft ground support equipment - General requirements - Part 1: Basic safety requirements | |
| Aircraft ground support equipment - General requirements - Part 2: Stability and strength requirements, calculations and test methods (Endorsed by AENOR in May of 2009.) | |
| Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction (Endorsed by AENOR in January of 2005.) | |
| Aircraft ground support equipment - General requirements - Part 3: Vibration measurement methods and reduction (Endorsed by AENOR in May of 2009.) | |
| Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction (Endorsed by AENOR in March of 2005.) | |
| Aircraft ground support equipment - General requirements - Part 4: Noise measurement methods and reduction (Endorsed by AENOR in May of 2009.) | |
| AIRCRAFT GROUND SUPPORT EQUIPMENT. GENERAL REQUIREMENTS. PART 1: BASIC SAFETY REQUIREMENTS. | |
| Aircraft ground support equipment. General requirements. Part 2: Stability and strength requirements, calculations and test methods. | |
| Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods. (Consolidated version) | |
| Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods. | |
| Appliances, solid fuels and firelighters for barbecueing - Part 1: Barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecueing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecueing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Firelighters for igniting solid fuels for use in barbecue - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Part 1: Barbecues burning solid fuels - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Part 2: Barbecue charcoal and barbecue charcoal briquettes - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Part 3: Firelighters for igniting solid fuels for use in barbecues and grill applications - Requirements and test methods | |
| Appliances, solid fuels and firelighters for barbecuing - Part 4: Single use barbecues burning solid fuels - Requirements and test methods | |
| Application equipment for coating materials - Safety requirements (Endorsed by Asociación Española de Normalización in March of 2025.) | |
| Atomising and spraying equipment for coating materials - Safety requirements (Endorsed by AENOR in October of 2013.) | |
| Atomising and spraying equipment for coating materials - Safety requirements | |
| ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS. SAFETY REQUIREMENTS | |
| Basket trolleys - Part 1: Requirements and tests for basket trolleys with or without a child carrying facility | |
| Basket trolleys - Part 2: Requirements, tests and inspection for basket trolleys with or without a child carrying facility, intended to be used on passenger conveyors | |
| Basket trolleys - Part 3: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility | |
| Basket trolleys - Part 4: Requirements and tests for basket trolleys with additional goods carrying facility(ies), with or without a child carrying facility, intended to be used on passenger conveyors... | |
| Basket trolleys - Part 7: Requirements and tests for basket trolleys with baby and child carrying facilities | |
| BLANK DETAIL SPECIFICATION: CONNECTORES FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY III. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES FOR MILITARY USE. ENVIRONMENTAL CATEGORY VI (Endorsed by AENOR in May of 1996.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES: ENVIRONMENTAL CATEGORY II. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY I. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY IV. (Endorsed by AENOR in November of 1997.) | |
| BLANK DETAIL SPECIFICATION: CONNECTORS FOR OPTICAL FIBRES AND CABLES; ENVIRONMENTAL CATEGORY V. (Endorsed by AENOR in November of 1997.) | |
| Blank Detail Specification: Digital microprocessor integrated circuits | |
| Blank Detail Specification: Push button switches - Assessment level Y | |
| BLANK DETAIL SPECIFICATION: ROTARY SWITCHES - ASSESMENT LEVEL Y. (Endorsed by AENOR in July of 1998.) | |
| Building hardware - Lever handles and knob furniture - Requirements and test methods. | |
| Building hardware - Lever handles and knob furniture - Requirements and test methods | |
| Building hardware - Single-axis hinges - Requirements and test methods. | |
| Building hardware - Single-axis hinges - Requirements and test methods | |
| Cement - Part 1: Composition, specifications and conformity criteria for common cements. | |
| Cement - Part 1: Composition, specifications and conformity criteria for common cements | |
| Cement - Part 2: Assessment and verification of constancy of performance | |
| CEMENT - PART 2: CONFORMITY EVALUATION. | |
| Cement - Part 2: Conformity evaluation | |
| Cement - Part 4: Composition, specifications and conformity criteria for low early strength blastfurnace cements | |
| Cement - Part 5: Portland-composite cement CEM II/C-M and Composite cement CEM VI | |
| Cement - Part 6: Cement with recycled building materials | |
| Cement. Part 1: Composition, specifications and conformity criteria for common cements. | |
| Cement. Part 2: Conformity evaluation. | |
| Child care articles - Safety barriers - Safety requirements and test methods | |
| Child care articles - Wheeled child conveyances - Part 1: Pushchairs and prams | |
| Child care articles - Wheeled child conveyances - Part 2: Pushchairs for children above 15 kg up to 22 kg | |
| Child care articles - Wheeled child conveyances - Part 3: Pushchairs intended for leisure sport activities | |
| Child care articles - Wheeled child conveyances - Safety requirements and test methods | |
| Child care articles. Safety barriers. Safety requirements and test methods. | |
| Child use and care articles - Safety barriers - Safety requirements and test methods | |
| Chimneys - Components - Concrete flue blocks | |
| Chimneys - Components - Concrete flue liners | |
| Chimneys - Metal chimneys - Test methods | |
| Chimneys - Requirements for metal chimneys - Part 1: System chimney products | |
| Chimneys - Requirements for metal chimneys - Part 2: Metal flue liners and connecting flue pipes | |
| Chimneys - Requirements for metal chimneys - Part 2: Metal liners and connecting flue pipes | |
| CHIMNEYS. METAL CHIMNEYS. TEST METHODS. | |
| Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced. | |
| Concrete manholes and inspection chambers, unreinforced, steel fibre and reinforced | |
| Concrete pipes and fittings, unreinforced, steel fibre and reinforced. | |
| Concrete pipes and fittings, unreinforced, steel fibre and reinforced | |
| Copper and copper alloys - Cast unwrought copper products | |
| Copper and copper alloys - Copper cathodes | |
| Copper and copper alloys - Copper drawing stock (wire rod) | |
| Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 1: Test with an encircling test coil on the... | |
| Copper and copper alloys - Eddy current test for measuring defects on seamless round copper and copper alloy tubes - Part 2: Test with an internal probe on the inner... | |
| COPPER AND COPPER ALLOYS. CAST UNWROUGHT COPPER PRODUCTS. | |
| COPPER AND COPPER ALLOYS. COPPER DRAWING STOCK (WIRE ROD). | |
| COPPER AND COPPER ALLOYS. EDDY CURRENT TEST FOR TUBES. | |
| COPPER AND COPPER ALLOYS. INGOTS AND CASTINGS. | |
| COPPER AND COPPER ALLOYS. MASTER ALLOYS. | |
| Copper and copper alloys. Master alloys | |
| Determination of explosion limits of gases and vapours (Endorsed by AENOR in November of 2012.) | |
| Determination of explosion limits of gases and vapours | |
| Determination of the explosion limits and the limiting oxygen concentration(LOC) for flammable gases and vapours (Endorsed by Asociación Española de Normalización in March of 2017.) | |
| DIVING ACCESORIES. SNORKELS. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Diving equipment - Snorkels - Requirements and test methods | |
| Domestic furniture - Beds and mattresses - Test methods for the determination of functional characteristics. | |
| EUROPEAN CHARACTER REPERTOIRES AND THEIR CODING. 8 BIT SINGLE BYTE CODING (Endorsed by AENOR in November of 2000.) | |
| EXTERIOR BLINDS. RESISTANCE TO LOAD DUE TO WATER ACCUMULATION. TEST METHOD. | |
| External blinds and shutters - Resistance to wind loads - Method of testing and performance criteria | |
| External blinds and shutters - Resistance to wind loads - Method of testing. | |
| Family specification - Optical fibre cables for indoor applications (Endorsed by AENOR in March of 2003.) | |
| Family specification -- Single-mode optical fibre cables to be used as underwater cables for lakes and river crossings etc. (Endorsed by AENOR in May of 2002.) | |
| FAMILY SPECIFICATION: A1A GRADED INDEX MULTIMODE OPTICAL FIBRES. | |
| FAMILY SPECIFICATION: A1B GRADED INDEX MULTIMODE OPTICAL FIBRES. | |
| Family Specification: AC MOS Digital integrated circuits | |
| Family Specification: Digital integrated HC MOS circuits - Series HC/HCT/HCU | |
| Family Specification: Digital integrated TTL circuits - Series 54, 64, 74, 84 | |
| Family Specification: Digital integrated TTL low power Schottky circuits - Series 54LS, 64LS, 74LS, 84LS | |
| FAMILY SPECIFICATION: OPTICAL AERIAL TELECOMUNICATION CABLES. | |
| FAMILY SPECIFICATION: OPTICAL TELECOMUNICATION CABLES TO BE USED IN DUCTS OR DIRECT BURIED APPLICATION. | |
| FAMILY SPECIFICATION: SINGLE-MODE DISPERSION SHIFTED (B2) OPTICAL FIBRE. | |
| FAMILY SPECIFICATION: SINGLE-MODE DISPERSION UNSHIFTED (B1.1) OPTICAL FIBRE. | |
| Family Specification: TTL advanced low power Schottky digital integrated circuits - Series 54ALS, 74ALS | |
| Family Specification: TTL advanced Schottky digital integrated circuits - Series 54AS, 74AS | |
| Family Specification: TTL FAST digital integrated circuits - Series 54F, 74F | |
| Family Specification: TTL-Schottky digital integrated circuits - Series 54S, 64S, 74S, 84S | |
| Feather and down - Sampling in view of tests (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Feather and down - Sampling in view of tests | |
| Feather and down - Terms and definitions (Endorsed by Asociación Española de Normalización in April of 2025.) | |
| Feather and down - Terms and definitions (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Feather and down - Terms and definitions | |
| Feather and down - Test methods - Determination of microbiological state | |
| Feather and down - Test methods - Determination of the commercial mass of a lot of feather and down | |
| Fire blankets | |
| Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles. | |
| Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles | |
| Firefighting and rescue service vehicles - Part 1: Nomenclature and designation | |
| Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance. | |
| Firefighting and rescue service vehicles - Part 2: Common requirements - Safety and performance | |
| Firefighting and rescue service vehicles - Part 3: Permanently installed equipment - Safety and performance | |
| FIREFIGHTING AND RESCUE SERVICE VEHICLES. PART 1: NOMENCLATURE AND DESIGNATION. | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of water vapour transmission properties | |
| Flexible sheets for waterproofing - Bitumen, plastic and rubber sheets for roof waterproofing - Determination of watertightness | |
| Flexible sheets for waterproofing - Determination of length, width and straightness - Part 1: Bitumen sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of length, width, straightness and flatness - Part 2: Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Determination of resistance to ozone - Plastic and rubber sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 1: Bitumen sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastic and rubber sheets | |
| Flexible sheets for waterproofing - Determination of thickness and mass per unit area - Part 2: Plastics and rubber sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of visible defects - Part 1: Bitumen sheets for roof waterproofing | |
| Flexible sheets for waterproofing - Determination of visible defects - Part 2: Plastic and rubber sheets for roof waterproofing. | |
| Flexible sheets for waterproofing - Plastics and rubber sheets for roof waterproofing - Methods for exposure to liquid chemicals, including water | |
| FLEXIBLE SHEETS FOR WATERPROOFING. METHODS FOR EXPOSURE TO LIQUID CHEMICALS, INCLUDING WATER. | |
| Food processing machinery - Slicing machines - Safety and hygiene requirements (Endorsed by Asociación Española de Normalización in January of 2021.) | |
| Food processing machinery - Slicing machines - Safety and hygiene requirements | |
| FOOD PROCESSING MACHINERY. SLICING MACHINES. SAFETY AND HYGIENE RERQUIREMENTS. | |
| FOOTWEAR MANUFACTURING MACHINES - FOOTWEAR MOULDING MACHINES - SAFETY REQUIREMENTS | |
| Furniture - Beds and mattresses - Test methods for the determination of functional characteristics and assessment criteria | |
| Gas infrastructure - Underground gas storage - Part 1: Functional recommendations for storage in aquifers | |
| Gas infrastructure - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields | |
| Gas infrastructure - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt caverns | |
| Gas infrastructure - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns | |
| Gas infrastructure - Underground gas storage - Part 5: Functional recommendations for surface facilities | |
| Gas supply systems - Underground gas storage - Part 1: Functional recommendations for storage in aquifers | |
| Gas supply systems - Underground gas storage - Part 2: Functional recommendations for storage in oil and gas fields | |
| Gas supply systems - Underground gas storage - Part 3: Functional recommendations for storage in solution-mined salt cavities | |
| Gas supply systems - Underground gas storage - Part 4: Functional recommendations for storage in rock caverns | |
| Gas supply systems - Underground gas storage - Part 5: Functional recommendations for surface facilities | |
| GENERIC SPECIFICATION. CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. PART 1: REQUIREMENTS, TEST METHODS AND QUALIFICATION APPROVAL PROCEDURES. | |
| Generic Specification: Electromechanical switches (Endorsed by AENOR in December of 2001.) | |
| Generic Specification: Monolithic integrated circuits | |
| GENERIC SPECIFICATION: OPTICAL FIBRE CABLES. | |
| GENERIC SPECIFICATION: OPTICAL FIBRES. | |
| Geotextiles and geotextile-related products - Determination of the compressive creep properties. | |
| GLASS IN BUILDING - HEAT STRENGHTNED SODA LIME SILICATE GLASS. PART 1: DEFINITION AND PRESCRIPTION | |
| Glass in building - Heat strengthened soda lime silicate glass - Part 1: Definition and description | |
| Glass in building - Heat strengthened soda lime silicate glass - Part 2: Evaluation of conformity/Product standard | |
| Industrial valves - Marking of metallic valves | |
| INDUSTRIAL VALVES. MARKING OF METALLIC VALVES. | |
| Information technology - Character repertoire and coding for interworking with Telex services | |
| INLAND NAVEGATION VESSELS. SHIP'S BOATS. (Endorsed by AENOR in May of 1997.) | |
| Inland navigation vessels - Wheelhouse - Ergonomic and safety requirements | |
| Inland navigation vessels - Work boats, ship’s boats and lifeboats | |
| Inland navigation vessels - Work boats, ship's boats and lifeboats | |
| INLAND NAVIGATION VESSELS. WHEELHOUSE AND CONTROL POSITION. TYPES, SAFETY REQUIREMENTS (Endorsed by AENOR in April of 1997.) | |
| Lighting applications - Emergency lighting for buildings | |
| Lighting applications - Emergency lighting | |
| LIGHTING APPLICATIONS. EMERGENCY LIGHTING. | |
| Machine-readable cards - Health care applications - Numbering system and registration procedure for issuer identifiers | |
| Machines for underground mines - Mobile machines working underground - Safety - Part 1: Rubber tyred vehicles | |
| Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives. | |
| Machines for underground mines - Mobile machines working underground - Safety - Part 2: Rail locomotives | |
| MARKING OF GENERAL PURPOSE INDUSTRIAL VALVES. | |
| Materials and articles in contact with foodstuffs - Non-metallic tableware - Terminology | |
| Method of testing cement - Part 2: Chemical analysis of cement | |
| Methods of testing cement - Part 10: Determination of the water-soluble chromium (VI) content of cement | |
| Methods of testing cement - Part 11: Heat of hydration - Isothermal Conduction Calorimetry method | |
| Methods of testing cement - Part 12: Reactivity of cement constituents - Heat of hydration and bound water content methods | |
| Methods of testing cement - Part 1: Determination of strength | |
| Methods of testing cement - Part 2: Chemical analysis of cement | |
| Methods of testing cement - Part 3: Determination of setting times and soundness | |
| Methods of testing cement - Part 5: Pozzolanicity test for pozzolanic cement | |
| Methods of testing cement - Part 6: Determination of fineness | |
| Methods of testing cement - Part 7: Methods of taking and preparing samples of cement | |
| Methods of testing cement - Part 8: Heat of hydration - Solution method | |
| Methods of testing cement - Part 9: Heat of hydration - Semi-adiabatic method | |
| METHODS OF TESTING CEMENT. PART 1: DETERMINATION OF STRENGTH. | |
| METHODS OF TESTING CEMENT. PART 2: CHEMICAL ANALYSIS OF CEMENT. | |
| METHODS OF TESTING CEMENT. PART 3: DETERMINATION OF SETTING TIME AND SOUNDNESS. | |
| METHODS OF TESTING CEMENT. PART 5: PUZZOLANICITY TEST FOR PUZZOLANIC CEMENT. | |
| Mobile fire extinguishers (Endorsed by AENOR in September of 2006.) | |
| Mobile fire extinguishers - Part 1: Characteristics, performance and test methods | |
| Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which... | |
| Mobile fire extinguishers - Part 3: Requirements for the assembly, construction and pressure resistance of CO2 extinguishers which comply with the requirements of EN 1866-1 | |
| MOBILE FIRE EXTINGUISHERS. | |
| Mobile fire extinguishers | |
| NATURAL STONE TEST METHOD. DETERMINATION OF REAL DENSITY AND APPARENT DENSITY, AND OF TOTAL AND OPEN POROSITY | |
| Natural stone test methods - Determination of real density and apparent density, and of total and open porosity | |
| Natural stone test methods - Determination of uniaxial compressive strength | |
| Natural stone test methods - Determination of water absorption coefficient by capillarity | |
| NATURAL STONE TEST METHODS. DETERMINATION OF COMPRESSIVE STRENGTH. | |
| Patient handling equipment used in ambulances - Part 2: Power assisted stretcher | |
| Patient handling equipment used in ambulances - Part 6: Powered chairs | |
| Patient handling equipment used in road ambulances - Part 1: General stretcher systems and patient handling equipment | |
| Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher | |
| Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher | |
| Patient handling equipment used in road ambulances - Part 4: Foldable patient transfer chair | |
| Patient handling equipment used in road ambulances - Part 5: Stretcher support | |
| Personal eye protection - Goggles for motorcycle and moped users (Endorsed by AENOR in February of 2011.) | |
| PERSONAL EYE PROTECTION. GOGGLES FOR MOTORCYCLES AND MOPED USERS | |
| Personal protective equipment against falls from a height - List of equivalent terms | |
| Personal protective equipment for the prevention of falls from a height - Low stretch kernmantel ropes | |
| Personal protective equipment for the prevention of falls from a height. Low stretch kernmantel ropes. | |
| Plastics - Thermoset moulding compounds (SMC - BMC) - Determination of compression moulding shrinkage | |
| Plastics piping and ducting systems - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam | |
| Plastics piping systems - Unplasticized poly(vinyl chloride) (PVC-U) pipes, fittings and material - Method for assessment of the PVC content based on total chlorine content | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system. | |
| Plastics piping systems for non-pressure underground drainage and sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system | |
| PLASTICS PIPING SYSTEMS FOR NON-PRESSURE UNDERGROUND DRAINAGE AND SEWERAGE. POLYPROPYLENE (PP). PART 1: SPECIFICATIONS FOR PIPES, FITTINGS AND THE SYSTEM. | |
| PLASTICS PIPING SYSTEMS. GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) PIPES. DETERMINATION OF THE RELATIVE FLEXURAL CREEP FACTOR FOLLOWING EXPOSURE TO A CHEMICAL ENVIRONMENT. | |
| Precious metals - The finenesses of solders used with precious metal jewellery alloys. | |
| Prefabricated accessories for roofing - Individual roof lights of plastics - Product specification and test methods | |
| Prefabricated accessories for roofing - Individual rooflights of plastics - Product specification and test methods | |
| PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES. | |
| PRESSURE SENSING DEVICES FOR GAS BURNERS AND GAS BURNING APPLIANCES | |
| Products and systems for the protection and repair of concrete structures - Test methods - Reactive functions related to epoxy resins - Part 2: Determination of amine functions using the... | |
| Products and systems for the protection and repair of concrete structures - Test methods - Testing of anchoring products by the pull-out method | |
| PRODUCTS AND SYSTEMS FOR THE PROTECTION AND REPAIR OF CONCRETE STRUCTURES. TEST METHODS. REACTIVE FUNCTIONS RELATED TO EPOXY RESINS. PART 1: DETERMINATION OF EPOXY EQUIVALENT. | |
| Qualitative classification of softwood round timber - Part 1: Spruces and firs | |
| Qualitative classification of softwood round timber - Part 2: Pines | |
| Qualitative classification of softwood round timber - Part 3: Larches and Douglas fir | |
| Refrigerating systems and heat pumps - System flow diagrams and piping and instrument diagrams - Layout and symbols | |
| Road marking materials - Paint, thermoplastic and cold plastic materials - Physical properties | |
| ROAD MARKING MATERIALS. PHYSICAL PROPERTIES. | |
| Rubber- or plastics- coated fabrics - Determination of tear strength - Part 3: Trapezoidal method | |
| Rubber- or plastics- coated fabrics - Low temperature tests - Part 2: Impact test on loop | |
| Rubber- or plastics-coated fabrics - Determination of tear strength - Part 3: Trapezoidal method (five-highest-peak calculation) | |
| Rubber- or plastics-coated fabrics - Low-temperature tests - Part 1: Bending test | |
| Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - Pressure sensing devices for gas burners and gas burning appliances | |
| Safety of woodworking machines - Circular sawing machines - Part 10: Single blade automatic and semi-automatic up-cutting cross-cut sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 11: Semi automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) | |
| Safety of woodworking machines - Circular sawing machines - Part 11: Semi-automatic and automatic horizontal cross-cut sawing machines with one saw unit (radial arm saws) | |
| Safety of woodworking machines - Circular sawing machines - Part 12: Pendulum cross-cut sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 13: Horizontal beam panel sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 14: Vertical panel sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 15: Multi-blade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 15: Multiblade cross-cut sawing machines with integrated feed of the workpiece and manual loading and/or unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V cutting | |
| Safety of woodworking machines - Circular sawing machines - Part 16: Double mitre sawing machines for V-cutting | |
| Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (manual radial arm saws) | |
| Safety of woodworking machines - Circular sawing machines - Part 17: Manual horizontal cutting cross-cut sawing machines with one saw unit (radial arm saws) | |
| Safety of woodworking machines - Circular sawing machines - Part 18: Dimension saws | |
| Safety of woodworking machines - Circular sawing machines - Part 19: Circular saw benches (with and without sliding table) and building site saws | |
| Safety of woodworking machines - Circular sawing machines - Part 1: Circular saw benches (with and without sliding table), dimension saws and building site saws | |
| Safety of woodworking machines - Circular sawing machines - Part 2. Horizontal beam panel saws and vertical panel saws. | |
| Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches. | |
| Safety of woodworking machines - Circular sawing machines - Part 3: Down cutting cross-cut saws and dual purpose down cutting cross-cut saws/circular saw benches | |
| Safety of woodworking machines - Circular sawing machines - Part 4: Multiblade rip sawing machines with manual loading and/or unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 5: Circular saw benches/up-cutting cross-cut sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cuttin g cross-cut sawing machines. | |
| Safety of woodworking machines - Circular sawing machines - Part 5: Circular sawbenches/up-cuttin g cross-cut sawing machines | |
| Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for fire wood | |
| Safety of woodworking machines - Circular sawing machines - Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or... | |
| Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading. | |
| Safety of woodworking machines - Circular sawing machines - Part 7: Single blade log sawing machines with integrated feed table and manual loading and/or unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading | |
| Safety of woodworking machines - Circular sawing machines - Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading | |
| SAFETY OF WOODWORKING MACHINES. CIRCULAR SAWING MACHINES. PART 1: CIRCULAR SAW BENCHES (WITH AND WITHOUT SLIDING TABLE) AND DIMENSION SAWS | |
| SAFETY OF WOODWORKING MACHINES. CIRCULAR SAWING MACHINES. PART 2: HORIZONTAL BEAM PANEL SAWS AND VERTICAL PANEL SAWS | |
| SAFETY OF WOODWORKING MACHINES. CIRCULAR SAWING MACHINES. PART 4: MULTIBLADE RIP SAWING MACHINES WITH MANUAL LOADING AND/OR UNLOADING. | |
| Safety of woodworking machines. Circular sawing machines. Part 6: Circular sawing machines for firewood and dual purpose circular sawing machines for firewood/circular saw benches, with manual loading and/or unloading. | |
| Safety of woodworking machines. Circular sawing machines. Part 8: Single blade edging circular rip sawing machines with power driven saw unit and manual loading and/or unloading. | |
| Safety of woodworking machines. Circular sawing machines. Part 9: Double blade circular sawing machines for cross-cutting with integrated feed and with manual loading and/or unloading. | |
| Safety on woodworking machines. Circular sawing machines. Part 16: Double miter sawing machines for V-cutting | |
| Safety requirements for cableway installations designed to carry persons - Recovery and evacuation | |
| Safety requirements for cableway installations designed to carry persons - Terminology (Endorsed by AENOR in December of 2005.) | |
| Safety requirements for cableway installations designed to carry persons - Terminology | |
| Safety requirements of cableway installations designed to carry persons - Tensioning devices | |
| Sanitary appliances - Baths made from crosslinked cast acrylic sheets - Requirements and test methods | |
| SECTIONAL SPECIFICATION: CONECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE SC (Endorsed by AENOR in October of 1998.) | |
| Sectional Specification: Connector sets for optical fibres and cables - Type LSF | |
| Sectional Specification: Connector sets for optical fibres and cables Type MF. (Endorsed by AENOR in March of 2001.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES- TYPE MPO. (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE 0CCA-PC (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSH (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE MSC. (Endorsed by AENOR in June of 1999.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE OCCA-BU (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE RCC. (Endorsed by AENOR in July of 1998.) | |
| SECTIONAL SPECIFICATION: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES; TYPE LSC. (Endorsed by AENOR in November of 1997.) | |
| Sectional Specification: Digital monolithic integrated circuits | |
| Sectional Specification: Membrane switches including Blank Detail Specification EN 196501. (Endorsed by AENOR in September of 1996.) | |
| Sectional Specification: Optical cables to be used along electrical power lines (OCEPL) (Endorsed by AENOR in May of 2002.) | |
| SECTIONAL SPECIFICATION: OPTICAL FIBRES A1 CATEGORY GRADED INDEX MULTIMODE. | |
| Sectional Specification: Rotary switches - Capability approval (Endorsed by AENOR in February of 2003.) | |
| SECTIONAL SPECIFICATION: SINGLE-MODE (SM) OPTICAL FIBRE. | |
| Sectional Specifications: Membrane switches including Blank Detail Specification EN 196501. (Endorsed by AENOR in November of 2001.) | |
| Self adhesive tapes - Determination of peel adhesion properties | |
| Self adhesive tapes - Measurement of Thickness. | |
| Self adhesive tapes - Measurement of Thickness | |
| SELF ADHESIVE TAPES. MEASUREMENT OF BREAKING STRENGTH. | |
| SELF ADHESIVE TAPES. MEASUREMENT OF ELONGATION AT BREAK | |
| SELF ADHESIVE TAPES. MEASUREMENT OF PEEL ADHESION FROM STAINLESS STEEL OR FROM ITS OWN BACKING. | |
| SELF ADHESIVE TAPES. MEASUREMENT OF STATIC SHEAR ADHESION. | |
| SELF ADHESIVE TAPES. MEASUREMENT OF THICKNESS. | |
| Self-adhesive tapes - Measurement of quick stick | |
| Self-adhesive tapes - Measurement of unwind adhesion at low speed | |
| Single mode optical cable (duct/direct buried installation) (Endorsed by AENOR in November of 2002.) | |
| Specification for the installation of LGP systems for habitation purposes in leisure accomodation vehicles and in other vehicles. | |
| Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and accommodation purposes in other vehicles | |
| Specification for the installation of LPG systems for habitation purposes in leisure accommodation vehicles and in other vehicles | |
| Specifications for flexible intermediate bulk containers (FIBCs) for non-dangerous goods. | |
| SPECIFICATIONS FOR STRETCHERS AND OTHER PATIENT HANDLING EQUIPMENT USED IN ROAD AMBULANCES | |
| SS: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE CF08. (Endorsed by AENOR in September of 1996.) | |
| SS: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE F-SMA. (Endorsed by AENOR in September of 1996.) | |
| SS: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE FC. (Endorsed by AENOR in September of 1996.) | |
| SS: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSA. (Endorsed by AENOR in September of 1996.) | |
| SS: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE LSB. (Endorsed by AENOR in September of 1996.) | |
| SS: CONNECTOR SETS FOR OPTICAL FIBRES AND CABLES. TYPE MT. (Endorsed by AENOR in September of 1996.) | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 5: Lime industry | |
| Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 6: Ferroalloy industry | |
| Stationary source emissions - Determination of mass concentration of gaseous chlorides expressed as HCl - Standard reference method | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs (Endorsed by AENOR in October of 2006.) | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 1: Sampling of PCDDs/PCDFs | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 2: Extraction and clean-up of PCDDs/PCDFs | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 3: Identification and quantification of PCDDs/PCDFs | |
| Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs | |
| Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry | |
| STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS. PART 1: SAMPLING. | |
| STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS. PART 2: EXTRACTION AND CLEAN-UP. | |
| STATIONARY SOURCE EMISSIONS. DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS. PART 3: IDENTIFICATION AND QUANTIFICATION. | |
| STATIONARY SOURCE EMISSIONS. MANUAL METHOD OF DETERMINATION OF HCI. PART 1: SAMPLING OF GASES. | |
| STATIONARY SOURCE EMISSIONS. MANUAL METHOD OF DETERMINATION OF HCL. PART 2: GASEOUS COMPOUNDS ABSORPTION. | |
| STATIONARY SOURCE EMISSIONS. MANUAL METHOD OF DETERMINATION OF HCL. PART 3: ABSORPTION SOLUTIONS ANALYSIS AND CALCULATION. | |
| Structural adhesives - Characterisation of a surface by measuring adhesion by means of the three point bending method. | |
| Structural adhesives - Characterization of a surface by measuring adhesion by means of the three point bending method | |
| Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate. | |
| Structural adhesives - Corrosion - Part 1: Determination and classification of corrosion to a copper substrate | |
| Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate. | |
| Structural adhesives - Corrosion - Part 2: Determination and classification of corrosion to a brass substrate | |
| Structural ahesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method. | |
| Structural ahesives - Evaluation of the effectiveness of surface treatment techniques for aluminium using a wet peel test in association with the floating roller method | |
| Structural timber - Strength classes - Assignment of visual grades and species | |
| STRUCTURAL TIMBER. STRENGTH CLASSES. ASSIGNMENT OF VISUAL GRADES AND SPECIES. | |
| Surface active agents - Determination of cloud point of non-ionic surface active agents obtained by condensation of ethylene oxide | |
| SURFACE ACTIVE AGENTS. DETERMINATION OF CLOUD POINT OF NON-IONIC SURFACE ACTIVE AGENTS OBTAINED BY CONDENSATION OF ETHYLENE OXIDE | |
| SURFACES FOR SPORTS AREAS. DETERMINATION OF THICKNESS OF SYNTHETIC SPORTS SURFACES. | |
| Test method for hydraulic setting floor smoothing and/or levelling compounds - Standard mixing procedures | |
| Textile floor coverings - Tests using the Lisson Tretrad Machine | |
| TEXTILE FLOOR COVERINGS. TESTS USING THE LISSON TRETRAD MACHINE. | |
| Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 1: Common criteria | |
| Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 2: Measurements by guarded hot plate method | |
| Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 3: Measurements by heat flow meter method | |
| Thermal performance of building products and components - Specific criteria for the assessment of laboratories measuring heat transfer properties - Part 5: Measurements by pipe test methods | |
| Thermal performance of building products and components. Specific criteria for the assessment of laboratories measuring heat transfer properties. Part 4: Measurements by hot box methods. | |
| Thermal performance of buildings - Determination of thermal resistance by hot box method using heat flow meter - Masonry | |
| TRANSPORTABLE GAS CYLINDERS - CYLINDERS FOR LIQUEFIED GASES (EXCLUDING ACETYLENE AND LPG) - INSPECTION AT TIME OF FILLING. | |
| Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders. | |
| Transportable gas cylinders - Periodic inspection and testing of seamless steel gas cylinders | |
| Transportable gas cylinders - Specification for the design and construction of refillable transportable seamless steel gas cylinders of water capacities from 0,5 litre up to and including 150 litres -... | |
| Transportable gas cylinders. Cylinders for compressed gases (excluditg acetylene). Inspection at time of filling. | |
| Transportable gas cylinders. Specification for the design an construction of refillable transportable seamless aluminium and aluminium alloys gas cylinders of capacity from 0.5 litre up to 150 litre. | |
| TRANSPORTABLE GAS CYLINDERS. SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES. PART 1:... | |
| TRANSPORTABLE GAS CYLINDERS. SPECIFICATION FOR THE DESIGN AND CONSTRUCTION OF REFILLABLE TRANSPORTABLE SEAMLESS STEEL GAS CYLINDERS OF WATER CAPACITIES FROM 0,5 LITRE UP TO AND INCLUDING 150 LITRES. PART 3:... | |
| Transportable gas cylinders. Specification for the design and construction of refillble transportable seamless aluminium and aluminum alloy gas cylinders of capacity from 0,5 litre up to 150 litres. | |
| Ventilation for buildings - Air handling units - Mechanical performance | |
| VENTILATION FOR BUILDINGS. AIR HANDLING UNITS. MECHANICAL PERFORMANCE | |
| WATER QUALITY. DETERMINATION OF BIOCHEMICAL OXYGEN DEMAND AFTER N DAYS (BODN). PART 1: DILUTION AND SEEDING METHOD WITH ALLYLTHIOUREA ADDITION. | |
| WATER QUALITY. DETERMINATION OF BIOCHEMICAL OXYGEN DEMAND AFTER N DAYS (BODN). PART 2: METHOD FOR UNDILUTED SAMPLES. | |
| WOOD AND PARQUET FLOORING AND WOOD PANELLING AND CLADDING. DETERMINATION OF DIMENSIONAL STABILITY. | |
| Wood flooring and wood panelling and cladding - Determination of dimensional stability |
| << Prev | Next >> |