AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
70
80
90
100
110
120
130
131
132
133
134
135
136
137
138
139
140
141
142
150
160
170
180
181
| Product Name | Notes |
|---|---|
| ACCEPTANCE INSPECTION FOR DIRECT CONNECTED ALTERNATING CURRENT STATIC WATT-HOUR METERS FOR ACTIVE ENERGY (CLASSES 1 AND 2). | |
| Aerospace series - Cap, protective, non-metallic for fitting ends = 3 000 PSI hydraulic systems | |
| Aerospace series - Cap, protective, non-metallic, for EN 6123 fitting ends (Endorsed by Asociación Española de Normalización in October of 2020.) | |
| Aerospace series - Plug, protective, non-metallic, for EN 6123 fitting ends (Endorsed by Asociación Española de Normalización in October of 2020.) | |
| Aerospace series - Plug, protective, non-metallic, for NAS1760 fitting ends and AS33649 boss ports (Endorsed by Asociación Española de Normalización in November of 2020.) | |
| Aerospace series - Rod-end, with bearing per EN 6096, with self-lubricating liner in corrosion resisting steel, extra wide inner ring, external threaded shank - Dimensions and loads - Inch series... | |
| CALIBRATION OF FIBRE OPTIC POWER METERS. (Endorsed by AENOR in June of 1998.) | |
| Calibration of fibre-optic power meters (Endorsed by AENOR in April of 2006.) | |
| Classification and designation of documents for plants, systems and equipment- Part 1: Rules and classification tables | |
| CLASSIFICATION AND DESIGNATION OF DOCUMENTS FOR PLANTS, SYSTEMS AND EQUIPMENT. | |
| Conduit systems for cable management - Part 1: General requirements | |
| Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems | |
| Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems | |
| Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems | |
| Conduit systems for cable management - Part 25: Particular requirements - Conduit fixing devices | |
| Conduit systems for cable management -- Part 1: General requirements | |
| Conduit systems for cable management -- Part 24: Particular requirements - Conduit systems buried underground | |
| Conduit systems for electrical installations -- Part 1: General requirements | |
| Convertor transformers - Part 2: Transformers for HVDC applications | |
| Convertor transformers -- Part 1: Transformers for industrial applications | |
| CONVERTOR TRANSFORMERS. PART 1: TRANSFORMERS FOR INDUSTRIAL APPLICATIONS. | |
| DEEP-FAT FRYERS FOR HOUSEHOLD USE. METHODS FOR MEASURING THE PERFORMANCE. | |
| Distribution automation using distribution line carrier systems -- Part 3-22: Mains signaling requirements - MV phase-to-earth and screen-to-earth intrusive coupling devices (Endorsed by AENOR in July of 2001.) | |
| Distribution automation using distribution line carrier systems -- Part 4-511: Data communication protocols - Systems management - CIASE protocol (Endorsed by AENOR in February of 2001.) | |
| Distribution automation using distribution line carrier systems -- Part 4-512: Data communication protocols - System management using profile 61334-5-1 - Management Information Base (MIB) (Endorsed by AENOR in May of... | |
| Distribution automation using distribution line carrier systems -- Part 5-1: Lower layer profiles - The spread frequency shift keying (S-FSK) profile (Endorsed by AENOR in November of 2001.) | |
| Distribution automation using distribution line carrier systems -- Part 6: A-XDR encoding rule (Endorsed by AENOR in February of 2001.) | |
| DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS. PART 3: MAINS SIGNALLING REQUIREMENTS. SECTION 21: MV PHASE-TO-PHASE ISOLATES CAPACITIVE COUPLING DEVICE (Endorsed by AENOR in November of 1997.) | |
| DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS. PART 4-33: DATA COMMUNICATION PROTOCOLS. DATA LINK LAYER. CONNECTION ORIENTED PROTOCOL (Endorsed by AENOR in February of 1999.) | |
| DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS. PART 4-61: DATA COMMUNICATION PROTOCOLS. NETWORK LAYER. CONNECTIONLESS PROTOCOL (Endorsed by AENOR in February of 1999.) | |
| DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS. PART 4: DATA COMMUNICATION PROTOCOLS. SECTION 1: REFERENCE MODEL OF THE COMMUNICATION SYSTEM (Endorsed by AENOR in November of 1997.) | |
| DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS. PART 4: DATA COMMUNICATION PROTOCOLS. SECTION 32: DATA LINK LAYER. LOGICAL LINK CONTROL (LLC) (Endorsed by AENOR in November of 1997.) | |
| DISTRIBUTION AUTOMATION USING DISTRIBUTION LINE CARRIER SYSTEMS. PART 4: DATA COMMUNUNICATION PROTOCOLS. SECTION 42: APPLICATION PROTOCOLS. APPLICATION LAYER. (Endorsed by AENOR in November of 1997.) | |
| DISTRIBUTION AUTOMATION USING DISTRUTION LINE CARRIER SYSTEMS. PART 4: DATA COMMUNICATION PROTOCOLS. SECTION 41: APPLICATION PROTOCOLS. DISTRIBUTION LINE MESSAGE SPECIFICATION (Endorsed by AENOR in November of 1997.) | |
| ELECTRIC TRACTION. ROLLING STOCK. COMBINED TESTING OF INVERTER-FED ALTERNATING CURRENT MOTORS AND THEIR CONTROL. | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 1: General requirements (Endorsed by AENOR in March of 2013.) | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for devices with field bus interfaces... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment (Endorsed by AENOR in June of 2013.)... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 2-6: Particular requirements - In vitro diagnostic (IVD) medical equipment | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-1: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) -... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements - Part 3-2: Immunity requirements for safety-related systems and for equipment intended to perform safety-related functions (functional safety) -... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 1: General requirements (IEC 61326-1:2005) | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-1: Particular requirements - Test configurations, operational conditions and performance criteria for sensitive test and measurement equipment... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-2: Particular requirements - Test configurations, operational conditions and performance criteria for portable test, measuring and monitoring... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-3: Particular requirements - Test configuration, operational conditions and performance criteria for transducers with integrated or remote... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-4: Particular requirements - Test configurations, operational conditions and performance criteria for insulation monitoring devices according to... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements -- Part 2-5: Particular requirements - Test configurations, operational conditions and performance criteria for field devices with interfaces according... | |
| Electrical equipment for measurement, control and laboratory use - EMC requirements | |
| ELECTRICAL EQUIPMENT FOR MEASUREMENT, CONTROL AND LABORATORY USE. EMC REQUIREMENTS. | |
| ELECTRICAL INSULATING MATERIALS. METHOD TO EVALUATE THE RESISTANCE TO TRACKING AND EROSION. ROTATING WHEEL DIP TEST. | |
| Electronic railway equipment - Train communication network (TCN) - Part 1: General architecture (Endorsed by AENOR in October of 2012.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-1: Wire Train Bus (WTB) (Endorsed by AENOR in October of 2012.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-2: Wire Train Bus conformance testing (Endorsed by AENOR in October of 2012.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile (Endorsed by AENOR in December of 2016.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile (Endorsed by AENOR in March of 2016.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile (Endorsed by AENOR in October of 2015.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-3: TCN communication profile (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 2-5: Ethernet train backbone (Endorsed by AENOR in April of 2015.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-1: Multifunction Vehicle Bus (MVB) (Endorsed by AENOR in October of 2012.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-2: MVB (Multifunction Vehicle Bus) conformance testing (Endorsed by AENOR in October of 2012.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-3: CANopen Consist Network (CCN) (Endorsed by AENOR in October of 2012.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN) (Endorsed by AENOR in June of 2014.) | |
| Electronic railway equipment - Train communication network (TCN) - Part 3-4: Ethernet Consist Network (ECN) (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge (Endorsed by AENOR in January of 2016.) | |
| Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge (Endorsed by Asociación Española de Normalización in September of 2022.) | |
| Electrostatics - Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge | |
| Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (Endorsed by AENOR in November of 2016.) | |
| Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid materials used to avoid electrostatic charge accumulation (Endorsed by Asociación Española de Normalización in September... | |
| Electrostatics - Part 2-3: Methods of test for determining the resistance and resistivity of solid planar materials used to avoid electrostatic charge accumulation | |
| Electrostatics - Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) electrostatic discharge test waveforms | |
| Electrostatics - Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) electrostatic discharge test waveforms | |
| Electrostatics - Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors | |
| Electrostatics - Part 4-3: Standard test methods for specific applications - Footwear | |
| Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) (Endorsed by AENOR in February of 2015.) | |
| Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) (Endorsed by AENOR in June of 2012.) | |
| Electrostatics - Part 4-4: Standard test methods for specific applications - Electrostatic classification of flexible intermediate bulk containers (FIBC) (IEC 61340-4-4:2005). | |
| Electrostatics - Part 4-5: Standard test methods for specific applications - Methods for characterizing the electrostatic protection of footwear and flooring in combination with a person | |
| Electrostatics - Part 4-6: Standard test methods for specific applications - Wrist straps (Endorsed by AENOR in November of 2015.) | |
| Electrostatics - Part 4-7: Standard test methods for specific applications - Ionization (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Electrostatics - Part 4-8: Standard test methods for specific applications - Electrostatic discharge shielding - Bags (Endorsed by AENOR in February of 2015.) | |
| Electrostatics - Part 4-9: Standard test methods for specific applications - Garments (Endorsed by AENOR in October of 2016.) | |
| Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements (Endorsed by Asociación Española de Normalización in January of 2017.) | |
| Electrostatics - Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements | |
| Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classification for packaging intended for electrostatic discharge sensitive devices (Endorsed by AENOR in January of... | |
| Electrostatics - Part 5-3: Protection of electronic devices from electrostatic phenomena - Properties and requirements classifications for packaging intended for electrostatic discharge sensitive devices | |
| Electrostatics -- Part 2-1: Measurement methods - Ability of materials and products to dissipate static electric charge | |
| Electrostatics -- Part 3-1: Methods for simulation of electrostatic effects - Human body model (HBM) - Component testing. | |
| Electrostatics -- Part 3-2: Methods for simulation of electrostatic effects - Machine model (MM) - Component testing. | |
| Electrostatics -- Part 4-1: Standard test methods for specific applications - Electrical resistance of floor coverings and installed floors | |
| Electrostatics -- Part 5-1: Protection of electronic devices from electrostatic phenomena - General requirements. | |
| Electrostatics -- Part 5-2: Protection of electronic devices from electrostatic phenomena - User guide. | |
| Fibre optic fan-outs -- Part 1-1: Blank detail specification (IEC 61314-1-1:2006). (Endorsed by AENOR in March of 2007.) | |
| Fibre optic fan-outs -- Part 1: Generic specification (Endorsed by AENOR in November of 2005.) | |
| FIBRE OPTIC FAN-OUTS. GENERIC SPECIFICATION. (Endorsed by AENOR in June of 1998.) | |
| Fibre optic inerconnecting devices and passive components - Basic test and measurement procedures -- Part 2-47: Tests - Thermal shocks. | |
| Fibre optic interconnect devices and passive components - Basic test and measurement procedures - Part 3-48: Examinations and measurements - Spring compression force of the coupling sleeve for rectangular ferrule... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedues -- Part 3-34: Examinations and measurements - Attenuation of random mated connectors. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-27: Tests - Dust - Laminar flow | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-28: Tests - Corrosive atmosphere (sulphur dioxide) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-32: Tests - Water vapour permeation | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-33: Tests - Assembly and disassembly of fibre optic mechanical splices, fibre management systems and... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-34: Tests - Resistance to solvents and contaminating fluids of interconnecting components and closures | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-35: Tests - Cable nutation (Endorsed by AENOR in October of 2014.) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-36: Tests - Flammability (fire hazard) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures (Endorsed by AENOR in September of... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-37: Tests - Cable bending for fibre optic closures | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 2-41: TESTS - SCREEN TESTING OF ATTENUATION OF SINGLE-MODE TUNED NON-ANGLED OPTICAL FIBRE CONNECTORS | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-43: Tests - Screen testing of return loss of single-mode PC optical fibre connectors (Endorsed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-46: Tests - Damp heat cyclic | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks (Endorsed by AENOR in October of 2016.) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-47: Tests - Thermal shocks | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-52: Tests - Bending test for cords (Endorsed by AENOR in June of 2013.) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-55: Tests - Strength of mounted adaptor (Endorsed by Asociación Española de Normalización in July... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-7: Tests - Bending moment | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-8: Tests - Bump | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-13: Examinations and measurements - Control stability of a fibre optic switch | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-14: Examinations and measurements - Error and repeatability of the attenuation settings of a variable... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Dome eccentricity of a convex polished ferrule endface | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-17: Examinations and measurements - Endface angle of angle-polished ferrules | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-18: Examinations and measurements - Keying accuracy of an angled endface connector | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time (Endorsed by AENOR in February of 2016.) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-21: Examinations and measurements - Switching time and bounce time | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examination and measurements - Fibre position relative to ferrule endface | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of non-angled ferrules and non-angled ferrules with fibre installed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-25: Examinations and measurements - Concentricity of the non-angled ferrules and non-angled ferrules with fibre... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Spectral transfer characteristics of DWDM devices (Endorsed by AENOR in... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-33: Examinations and measurements - Withdrawal force from a resilient alignment sleeve using gauge pins... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Fibre optic connector endface visual and automated inspection | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-35: Examinations and measurements - Visual inspection of fibre optic connectors and fibre-stub transceivers (Endorsed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-38:Examinations and measurements - Group delay, chromatic dispersion and phase ripple (Endorsed by AENOR in... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-39: Examinations and measurements - Physical contact (PC) optical connector reference plug selection for return... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES - PART 3-40: EXAMINATIONS AND MEASUREMENTS - EXTINCTION RATIO OF A POLARIZATION MAINTAINING (PM) FIBRE PIGTAILED CONNECTOR. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-43: Examinations and measurements - Mode transfer function measurement for fibre optic sources | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-45: Examinations and measurements - Attenuation of random mated multi-fibre connectors (Endorsed by AENOR in... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-46: Measurement - Bore diameter for guide pin in MT ferrules (Endorsed by AENOR in... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-47: Examinations and measurements - End face geometry of PC/APC spherically polished ferrules using interferometry... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-49: Examinations and measurements - Guide pin retention force for rectangular ferrule multi-fibre connectors (Endorsed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches (Endorsed by AENOR in June... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-50: Examinations and measurements - Crosstalk for optical spatial switches (Endorsed by AENOR in October... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-51: Examinations and measurements - Pin gauge withdrawal force for rectangular ferrule multi-fibre connectors (Endorsed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-52: Examinations and measurements - Guide hole and alignment pin deformation constant, CD for 8... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-53: Examinations and measurements - Encircled angular flux (EAF) measurement method based on two-dimensional far... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-8: Examinations and measurements - Ambient light susceptibility | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-23: Tests - Sealing for non-pressurized closures of fibre optic devices | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-24: Tests - Screen testing of ceramic alignment split sleeve by stress application | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-26: Tests - Salt mist (IEC 61300-2-26:2006). (Endorsed by AENOR in October of 2007.) | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-2: Tests - Mating durability | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-33: Tests - Assembly and disassembly of fibre optic closures (IEC 61300-2-33:2006). | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-38: Tests - Sealing for pressurized fibre optic closures (IEC 61300-2-38:2006). | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-40: Tests - Screen testing of attenuation of single-mode tuned angled optical connectors. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-42: Tests - Static side load for connectors | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-43: Tests - Screen testing of return loss of single mode PC optical fibre connectors. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-44: Tests - Flexing of the strain relief of fibre optic devices | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-45: Tests - Durability test by water immersion | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-47: Tests - Thermal shocks (IEC 61300-2-47:2006). | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-48: Tests - Temperature-humidity cycling | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-49: Tests - Connector installation test (IEC 61300-2-49:2007). (Endorsed by AENOR in December of 2007.)... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-50: Tests - Fibre optic connector proof test with static load - Singlemode and multimode... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-51: Tests - Fibre optic connector test for transmission with applied tensile load - Singlemode... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 2-5: Tests - Torsion/twist | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-12: Examinations and measurements - Polarization dependence of attenuation of a single-mode fibre optic component:... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-14: Examinations and measurements - Accuracy and repeatability of the attenuation settings of a variable... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-19: Examinations and measurements - Polarization dependence of return loss of a single mode fibre... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-1: Examinations and measurements - Visual examination | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-24: Examinations and measurements - Keying accuracy of optical connectors for polarization maintaining fibre. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-28: Examinations and measurements - Transient loss. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-29: Examinations and measurements - Measurement techniques for characterizing the amplitude of the spectral transfer... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device (Endorsed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-32: Examinations and measurements - Polarization mode dispersion measurement for passive optical components (IEC 61300-3-32:2006). | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-33: Examinations and measurements - Ferrule withdrawal force. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-36: Examinations and measurements - Measurement methods for the inside and outside diameters of fibre... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-37: Examinations and measurements - Endface angle of angle-polished optical fibres | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss (Endorsed... | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-4: Examination and measurements - Attenuation | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-4: Examinations and measurements - Attenuation. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-5: Examinations and measurements - Wavelength dependence of attenuation. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-6: Examinations and measurements - Return loss | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -- Part 3-9: Examinations and measurements - Far-end crosstalk. | |
| Fibre optic interconnecting devices and passive components - Basic test and measurement procedures . Part 3-6: Examinations and measurements - Return loss. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-3: TESTS. STATIC SHEAR LOAD. (Endorsed by AENOR in December of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-4: TEST. FIBRE/CABLE RETENTION. (Endorsed by AENOR in December of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-5: TEST. TORSION/TWIST. (Endorsed by AENOR in December of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-6: TESTS.TENSILE STRENGTH OF COUPLING MECHANISM. (Endorsed by AENOR in December of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-7: TEST. BENDING MOMENT. (Endorsed by AENOR in December of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS - BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-9: TESTS. SHOCK. (Endorsed by AENOR in December of 1997.) | |
| Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1-1: Blank detail specification (Endorsed by AENOR in April of 2012.) | |
| Fibre optic interconnecting devices and passive components - Fibre optic fan-outs - Part 1: Generic specification (Endorsed by AENOR in May of 2012.) | |
| Fibre optic interconnecting devices and passive components - Fibre optic fan-outs -- Part 1: Generic specification (Endorsed by AENOR in July of 2009.) | |
| Fibre optic interconnecting devices and passive components- Basic test and measurement procedures- Part 3-42: Examinations and measurements- Attenuation of single mode alignment sleeves and or adaptors with resilient alignment sleeves... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-22: TEST. CHANGE OF TEMPERATURE. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-25: TESTS. SEALING ENDURANCE FOR CLOSURES. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-26: TESTS. SALT MIST. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-28: TESTS. INDUSTRIAL ATMOSPHERE (SULPHUR DIOXIDE). | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-29: TESTS. LOW AIR PRESSURE. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-2: TESTS. MATING DURABILITY. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-30: TEST. SOLAR RADIATION. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-31: TESTS. NUCLEAR RADIATION. | |
| Fibre optic interconnecting devices and passive components. basic test and measurement procedures. Part 2-33: Tests. Assembly and disassembly of closures. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-34: TESTS. RESISTANCE TO SOLVENTS AND CONTAMINATING FLUIDS. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-35: TESTS. CABLE NUTATION. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-37: TESTS. CABLE BENDING FOR CLOSURES. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-38: TESTS. SEALING FOR PRESSURIZED CLOSURED OF FIBRE OPTIC DEVICES. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-39: TESTS. SUSCEPTIBILITY TO EXTERNAL MAGNETIC FIELDS. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-3: TESTS. STATIC SHEAR LOAD. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-5: TEST. TORSION/TWIST. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-6: TESTS. TENSILE STRENGTH OF COUPLING MECHANISM. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-7: TESTS. BENDING MOMENT. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 2-9: TESTS. SHOCK. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-10: EXAMINATIONS AND MEASUREMENTS. GAUGE RETENTION FORCE. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-11: EXAMINATIONS AND MEASUREMENTS. ENGAGEMENT AND SEPARATION FORCES. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-12: EXAMINATIONS AND MEASUREMENTS. POLARIZATION DEPENDENCE OF ATTENUATION OF A SINGLE-MODE FIBRE OPTIC COMPONENT: MATRIX CALCULATION METHOD. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-14: EXAMINATIONS AND MEASUREMENTS. ACCURACY AND REPEATABILITY OF THE ATTENUATION SETTINGS OF A VARIABLE ATTENUATOR. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-15: EXAMINATIONS AND MEASUREMENTS. ECCENTRICITY OF A CONVEX POLISHED FERRULE ENDFACE. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-16: EXAMINATIONS AND MEASUREMENTS. ENDFACE RADIUS OF SPHERICALLY POLISHED FERRULES. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-17: EXAMINATIONS AND MEASUREMENTS. ENDFACE ANGLE OF ANGLE-POLISHED FERRULES. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-18: EXAMINATIONS AND MEASUREMENTS. KEYING ACCURACY OF AN ANGLED ENDFACE CONNECTOR. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-19: EXAMINATIONS AND MEASUREMENTS. POLARIZATION DEPENDENCE OF RETURN LOSS OF A SINGLE MODE FIBRE OPTIC COMPONENT. (Endorsed... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-22: EXAMINATIONS AND MEASUREMENTS.FERRULE COMPRESSION FORCE. (Endorsed by AENOR in November of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-22: EXAMINATIONS AND MEASUREMENTS.FERRULE COMPRESSION FORCE. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-25: EXAMINATIONS AND MEASUREMENTS. CONCENTRICITY OF THE FERRULES AND FERRULES WITH FIBRE INSTALLED. (Endorsed by AENOR in... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-25: EXAMINATIONS AND MEASUREMENTS. CONCENTRICITY OF THE FERRULES AND FERRULES WITH FIBRE INSTALLED. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-26: EXAMINATIONS AND MEASUREMENTS. MEASUREMENT OF THE ANGULAR MISALIGNMENT BETWEEN FIBRE AND FERRULES AXES. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-27: EXAMINATIONS AND MEASUREMENTS. MEASUREMENT METHOD FOR THE HOLE LOCATION OF A MULTIWAY CONNECTOR PLUG. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-2: EXAMINATIONS AND MEASUREMENTS. POLARIZATION DEPENDENCE OF A SINGEL-MODE FIBRE OPTIC DEVICE. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-34: EXAMINATIONS AND MEASUREMENTS . ATTENUATION OF RANDOM MATED CONNECTORS. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-39: EXAMINATIONS AND MEASUREMENTS. PC OPTICAL CONNECTOR REFERENCE PLUG SELECTION | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-3: EXAMINATIONS AND MEASUREMENTS. MONITORING CHANGE IN ATTENUATION AND IN RETURN LOSS (MULTIPLE PATHS). (Endorsed by AENOR... | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-3: EXAMINATIONS AND MEASUREMENTS. MONITORING CHANGE IN ATTENUATION AND IN RETURN LOSS (MULTIPLE PATHS). | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-6: EXAMINATIONS AND MEASUREMENTS. RETURN LOSS. (Endorsed by AENOR in November of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-6: EXAMINATIONS AND MEASUREMENTS. RETURN LOSS. | |
| Fibre optic interconnecting devices and passive components. Basic test and measurement procedures. Part 3-7: Examinations and measurements. Wavelength dependence of attenuation and return loss. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT PROCEDURES. PART 3-9: EXAMINATIONS AND MEASUREMENTS. FAR-END CROSSTALK. (Endorsed by AENOR in November of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TEST AND MEASUREMENT. PROCEDURES. PART 3-1: EXAMINATIONS AND MEASUREMENTS. VISUAL EXAMINATION. | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIC TESTS AND MEASUREMENT PROCEDURES. PART 3-2: EXAMINATIONS AND MEASUREMENTS. POLARIZATION DEPENDENCE OF ATTENUATION IN A SINGLE-MODE FIBRE OPTIC DEVICE | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASICTEST AND MEASUREMENT PROCEDURES. PART 2-39: TESTS. SUSCEPTIBILITY TO EXTERNAL MAGNETIC FIELDS. (Endorsed by AENOR in November of 1997.) | |
| FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS. BASIS TEST AND MEASUREMENT PROCEDURES. PART 2-23: TESTS. SEALING FOR NON-PRESSURIZED CLOSURES OF FIBRE OPTIC DEVICES. | |
| Fibre optic passive components and cable assemblies - Part 1: Capability approval - Generic specification | |
| Filters using waveguide type dielectric resonators -- Part 1: Generic specification (IEC 61337-1:2004). (Endorsed by AENOR in September of 2006.) | |
| Filters using waveguide type dielectric resonators -- Part 2: Guidance for use (Endorsed by AENOR in January of 2005.) | |
| FILTERS USING WAVEGUIDE TYPE DIELECTRIC RESONATORS. PART 1: GENERAL INFORMATION, STANDARD VALUES AND TEST CONDITIONS. SECTION 1: GENERAL INFORMATION AND STANDARD VALUES. (Endorsed by AENOR in June of 1998.) | |
| Guide to specification of hydraulic turbine control systems. | |
| Guide to specification of hydraulic turbine governing systems | |
| HELICAL-SCAN DIGITAL COMPOSITE VIDEO CASSETTE RECORDING SYSTEM USING 12,65 MM (0,5 IN) MAGNETIC TAPE. FORMAT D-3. | |
| High-frequency dielectric heating installations - Test methods for the determination of power output (IEC 61308:2005) | |
| HIGH-FREQUENCY DIELECTRIC HEATING INSTALLATIONS. TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT. | |
| HIGH-VOLTAGE/LOW-VOL TAGE PREFABRICATED SUBSTATIONS. | |
| Household high-fidelity audio equipment and systems - Methods of measuring and specifying the performance -- Part 5: Loudspeakers | |
| HOUSEHOLD HIGH-FIDELITY AUDIO EQUIPMENT AND SYSTEMS. METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE. PART 1: GENERAL. | |
| HOUSEHOLD HIGH-FIDELITY AUDIO EQUIPMENT AND SYSTEMS. METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE. PART 2: FM RADIO TUNERS. | |
| HOUSEHOLD HIGH-FIDELITY AUDIO EQUIPMENT AND SYSTEMS. METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE. PART 3: AMPLIFIERS. | |
| Independent closed-fronted gas-fired type B11, type C11, type C31 and type C91 heaters | |
| Independent gas-fired convection heaters. | |
| Independent gas-fired convection heaters | |
| INDUSTRIAL CABLE REELS. | |
| Industrial microwave heating installations - Test methods for the determination of power output (Endorsed by AENOR in October of 2011.) | |
| Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2006) | |
| INDUSTRIAL MICROWAVE HEATING INSTALLATIONS. TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT. | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations -- Part 2: Classification of objects and codes for classes (Endorsed by AENOR in October of... | |
| INDUSTRIAL SYSTEMS, INSTALLATIONS AND EQUIPMENT AND INDUSTRIAL PRODUCTS. STRUCTURING PRINCIPLES AND REFERENCE DESIGNATIONS. PART 1: BASIC RULES. | |
| INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V. CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS. DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA. | |
| INTERCONNECTIONS OF SATELLITE RECEIVING EQUIPMENT. PART 1: EUROPE. | |
| Interconnections of satellite receiving equipment. Part 1: Europe | |
| Lamp control gear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps | |
| Lamp controlgear - Part 1: General and safety requirements | |
| Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires | |
| Lamp controlgear - Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules | |
| Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters) | |
| Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps | |
| Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) | |
| Lamp controlgear - Part 2-7: Particular requirements for electric source for safety services (ESSS) supplied electronic controlgear for emergency lighting (self-contained) | |
| Lamp controlgear - Part 2-9: Particular requirements for electromagnetic controlgear for discharge lamps (excluding fluorescent lamps) | |
| Lamp controlgear -- Part 1: General and safety requirements. | |
| Lamp controlgear -- Part 1: General and safety requirements | |
| Lamp controlgear -- Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) | |
| Lamp controlgear -- Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires | |
| Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-12:2005) | |
| Lamp controlgear -- Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) | |
| Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters) (IEC 61347-2-1:2000/A1:20 05). | |
| Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters). | |
| Lamp controlgear -- Part 2-1: Particular requirements for starting devices (other than glow starters) | |
| Lamp Controlgear -- Part 2-2: Particular requirements for d.c or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2000/A1:20 05). | |
| Lamp controlgear -- Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps (IEC 61347-2-2:2000/A2:20 06) | |
| Lamp controlgear -- Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps. | |
| Lamp controlgear -- Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps | |
| Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps (IEC 61347-2-3:2000/A2:20 06). | |
| Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps. | |
| Lamp controlgear -- Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps | |
| Lamp controlgear -- Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting. | |
| Lamp controlgear -- Part 2-4: Particular requirements for d.c. supplied electronic ballasts for general lighting | |
| Lamp controlgear -- Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting. | |
| Lamp controlgear -- Part 2-5: Particular requirements for d.c. supplied electronic ballasts for public transport lighting | |
| Lamp controlgear -- Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting. | |
| Lamp controlgear -- Part 2-6: Particular requirements for d.c. supplied electronic ballasts for aircraft lighting | |
| Lamp controlgear -- Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained) | |
| Lamp controlgear -- Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting (IEC 61347-2-7:2006). | |
| Lamp controlgear -- Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting. | |
| Lamp controlgear -- Part 2-7: Particular requirements for d.c. supplied electronic ballasts for emergency lighting | |
| Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps (IEC 61347-2-8:2000/A1:20 06) | |
| Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps. | |
| Lamp controlgear -- Part 2-8: Particular requirements for ballasts for fluorescent lamps | |
| Lamp controlgear -- Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) (IEC 61347-2-9:2000/A2:20 06) | |
| Lamp controlgear -- Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) | |
| Live working - Conformity assessment applicable to tools, devices and equipment | |
| Low-voltage switchgear and controlgear assemblies - Part 1: General rules | |
| Low-voltage switchgear and controlgear assemblies -- Part 1: General rules | |
| Marking of secondary cells and batteries with the international recycling symbol ISO 7000-1135 and indications regarding directives 93/86/EEC and 91/157/EEC | |
| MARKING ON U AND E FERRITE CORES (Endorsed by AENOR in June of 1998.) | |
| Medical electrical equipment - Radionuclide calibrators - Particular methods for describing performance | |
| MEDICAL ELECTRICAL EQUIPMENT. RADIONUCLEIDE CALIBATORS. PARTICULAR METHODS FOR DESCRIBING PERFORMANCE. | |
| Method of measurement of centre beam intensity and beam angle(s) of reflector lamps | |
| OVERHEAD ELECTRICAL CONDUCTORS. CREEP TEST PROCEDURES FOR STRANDED CONDUCTORS. | |
| Overhead lines - Requirements for greases for aluminium, aluminium alloy and steel bare conductors (Endorsed by AENOR in February of 2012.) | |
| Protective devices against diagnostic medical X-radiation - Part 1: Determination of attenuation properties of materials | |
| Protective devices against diagnostic medical X-radiation - Part 2: Protective glass plates | |
| Protective devices against diagnostic medical X-radiation - Part 2: Translucent protective plates | |
| Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing and protective devices for gonads | |
| Protective devices against diagnostic medical X-radiation - Part 3: Protective clothing, eyewear and protective patient shields | |
| Railway applications - Rolling stock - Combined test method for traction systems | |
| Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control | |
| Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system | |
| Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system | |
| Railway applications - Rolling stock -- Part 1: Combined testing of inverter-fed alternating current motors and their control system | |
| Railway applications - Rolling stock equipment - Shock and vibration tests (Endorsed by AENOR in May of 2001.) | |
| Railway applications - Rolling stock equipment - Shock and vibration tests | |
| Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles | |
| SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 2: INTERACTIONS BETWEEN THE DESIGN OF MACHINERY AND WORK TASKS. | |
| Safety of machinery - Ergonomic design principles - Part 2: Interactions between the design of machinery and work tasks | |
| Safety of machinery - Indication, marking and actuation -- Part 1: Requirements for visual, auditory and tactile signals | |
| Safety of machinery - Indication, marking and actuation -- Part 2: Requirements for marking | |
| Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators. | |
| Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators | |
| Safety of machinery - Indication, marking and actuation. Part 1: Requirements for visual, acoustic and tactile signals. | |
| SAFETY OF MACHINERY. ERGONOMIC DESIGN PRINCIPLES. PART 1: TERMINOLOGY AND GENERAL PRINCIPLES. | |
| SAFETY OF MACHINERY. INDICATION, MARKING AND ACTUATION. PART 1: REQUIREMENTS FOR VISUAL, AUDITORY AND TACTILE SIGNALS. | |
| SAFETY OF MACHINERY. INDICATION, MARKING AND ACTUATION. PART 2: REQUIREMENTS FOR MARKING. | |
| SECONDARY CELLS AND BATTERIES CONTAINING ALKALINE OR OTHER NON-ACID ELECTROLYTES. SEALED NICKEL-METAL HYDRIDE RECHARGEABLE SINGLE CELLS. | |
| SECONDARY CELLS AND BATTERIES CONTANING ALKALINE OR OTHER NON-ACID ELECTROLYTES. GUIDE TO THE DESIGNATION OF CURRENT IN ALKALINE SECONDARY CELL AND BATTERY STANDARDS. | |
| Secondary cells and batteries for photovoltaic energy systems (PVES) - General requirements and methods of test | |
| Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 1: Photovoltaic off-grid application | |
| Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications (Endorsed by AENOR in January of 2016.) | |
| Secondary cells and batteries for renewable energy storage - General requirements and methods of test - Part 2: On-grid applications (Endorsed by Asociación Española de Normalización in June of 2024.)... | |
| Secondary cells and batteries for solar photovoltaic energy systems - General requirements and methods of test. | |
| SOFT FERRITE MATERIAL CLASSIFICATION (Endorsed by AENOR in June of 1998.) | |
| Soft ferrite material classification (Endorsed by AENOR in March of 2006.) | |
| Soft ferrite material classification (Endorsed by Asociación Española de Normalización in March of 2017.) | |
| SOUND SYSTEM EQUIPMENT. METHODS OF MEASURING AND SPECIFYING THE PERFORMANCE OF SOUNDERS (ELECTROACOUSTIC TRANSDUCERS FOR TONE PRODUCTION). | |
| Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods (Endorsed by Asociación Española de Normalización in January of 2018.) | |
| Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema (Endorsed by AENOR in March of 2013.) | |
| Standard data element types with associated classification scheme for electric components - Part 2: EXPRESS dictionary schema | |
| Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes | |
| Standard data element types with associated classification scheme for electric components - Part 5: Extensions to the EXPRESS dictionary schema | |
| Standard data element types with associated classification scheme for electric components - Part 6: IEC Common Data Dictionary (IEC CDD) quality guidelines (Endorsed by Asociación Española de Normalización in March... | |
| Standard data element types with associated classification scheme for electric components -- Part 1: Definitions - Principles and methods | |
| Standard data element types with associated classification scheme for electric components -- Part 1: Definitions, principles and methods | |
| Standard data element types with associated classification scheme for electric components -- Part 2: EXPRESS dictionary schema. | |
| STANDARD DATA ELEMENT TYPES WITH ASSOCIATED CLASSIFICATION SCHEME FOR ELECTRIC COMPONENTS. PART 1: DEFINITIONS. PRINCIPLES AND METHODS. | |
| STANDARD DATA ELEMENT TYPES WITH ASSOCIATED CLASSIFICATION SCHEME FOR ELECTRIC COMPONENTS. PART 2: EXPRESS DICTIONARY SCHEMA. | |
| Standard data element types with associated classification scheme for electric components. Part 4: IEC reference collection of standard data element types, component classes and terms. | |
| Standard data elements types with associated classification scheme for electric items - Part 1: Definitions - Principles and methods | |
| Ultrasonics - Pulse-echo scanners - Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response (Endorsed by Asociación Española de Normalización in January of 2018.)... | |
| Ultrasonics - Pulse-echo scanners -- Part 1: Techniques for calibrating spatial measurement systems and measurement of system point-spread function response (IEC 61391-1:2006). (Endorsed by AENOR in March of 2007.) | |
| Ultrasonics - Pulse-echo scanners -- Part 2: Measurement of maximum depth of penetration and local dynamic range (Endorsed by AENOR in September of 2010.) | |
| UV test for photovoltaic (PV) modules | |
| Waveguide type dielectric resonators - Part 1-5: General information and test conditions - Measurement method of conductivity at interface between conductor layer and dielectric substrate at microwave frequency (Endorsed by... | |
| Waveguide type dielectric resonators -- Part 1-3: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at microwave frequency (Endorsed by AENOR in... | |
| Waveguide type dielectric resonators -- Part 1-4: General information and test conditions - Measurement method of complex relative permittivity for dielectric resonator materials at millimetre-wave frequency (Endorsed by AENOR in... | |
| Waveguide type dielectric resonators -- Part 1: Generic specification (Endorsed by AENOR in May of 2005.) | |
| Waveguide type dielectric resonators -- Part 2: Guidelines for oscillator and filter applications (Endorsed by AENOR in November of 2004.) | |
| Waveguide type dielectric resonators -- Part 4-1: Blank detail specification (Endorsed by AENOR in September of 2005.) | |
| Waveguide type dielectric resonators -- Part 4: Sectional specification (Endorsed by AENOR in September of 2005.) | |
| Wind energy generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines | |
| Wind energy generation systems - Part 12-1: Power performance measurements of electricity producing wind turbines | |
| Wind energy generation systems - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models (Endorsed by Asociación Española de Normalización in... | |
| Wind energy generation systems - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile (Endorsed by Asociación Española de Normalización in April of... | |
| Wind energy generation systems - Part 25-5: Communications for monitoring and control of wind power plants - Compliance testing (Endorsed by Asociación Española de Normalización in February of 2018.) | |
| Wind energy generation systems - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring (Endorsed by Asociación Española... | |
| Wind power generation systems - Part 12-1: Power performance measurement of electricity producing wind turbines | |
| Wind turbine generator systems -- Part 11: Acoustic noise measurement techniques | |
| Wind turbine generator systems -- Part 1: Safety requirements | |
| Wind turbine generator systems -- Part 21: Measurement and assesment of power quality characteristics of grid connected wind turbines. | |
| WIND TURBINE GENERATOR SYSTEMS. PART 11: ACOUSTIC NOISE MEASUREMENT TECHNIQUES | |
| WIND TURBINE GENERATOR SYSTEMS. PART 12: WIND TURBINES POWER PERFORMANCE TESTING. | |
| WIND TURBINE GENERATOR SYSTEMS. PART 2: SAFETY OF SMALL WIND TURBINES. | |
| Wind turbines - Part 11: Acoustic noise measurement techniques | |
| Wind turbines - Part 12-1: Power performance measurements of electricity producing wind turbines | |
| Wind turbines - Part 12-2: Power performance of electricity-producin g wind turbines based on nacelle anemometry (Endorsed by AENOR in November of 2016.) | |
| Wind turbines - Part 12-2: Power performance of electricity-producin g wind turbines based on nacelle anemometry (Endorsed by AENOR in October of 2013.) | |
| Wind turbines - Part 13: Measurement of mechanical loads (Endorsed by AENOR in June of 2016.) | |
| Wind turbines - Part 13: Measurement of mechanical loads (Endorsed by Asociación Española de Normalización in March of 2022.) | |
| Wind turbines - Part 1: Design requirements | |
| Wind turbines - Part 21: Measurement and assessment of power quality characteristics of grid connected wind turbines | |
| Wind turbines - Part 22: Conformity testing and certification | |
| Wind turbines - Part 23: Full-scale structural testing of rotor blades | |
| Wind turbines - Part 24: Lightning protection | |
| Wind turbines - Part 25-1: Communications for monitoring and control of wind power plants - Overall description of principles and models | |
| Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models (Endorsed by AENOR in January of 2016.) | |
| Wind turbines - Part 25-2: Communications for monitoring and control of wind power plants - Information models | |
| Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models (Endorsed by AENOR in January of 2016.) | |
| Wind turbines - Part 25-3: Communications for monitoring and control of wind power plants - Information exchange models | |
| Wind turbines - Part 25-4: Communications for monitoring and control of wind power plants - Mapping to communication profile | |
| Wind turbines - Part 25-5: Communications for monitoring and control of wind power plants - Conformance testing | |
| Wind turbines - Part 25-6: Communications for monitoring and control of wind power plants - Logical node classes and data classes for condition monitoring | |
| Wind turbines - Part 27-1: Electrical simulation models - Wind turbines (Endorsed by AENOR in January of 2016.) | |
| Wind turbines - Part 2: Design requirements for small wind turbines | |
| Wind turbines - Part 2: Small wind turbines | |
| Wind turbines - Part 3: Design requirements for offshore wind turbines | |
| Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| << Prev | Next >> |