Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
600
650
700
750
800
850
890
900
910
920
930
940
941
942
943
944
945
946
947
948
949
950
951
952
953
960
970
980
990
1000
1010
1050
1100
1150
1200
1250
1300
1500
1620
| Product Name | Notes |
|---|---|
| 2010 Interim Revisions to Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | |
| 2011 Interim Revisions to Standard Specifications for Structural Supports for Highway Signs, Luminaires, and Traffic Signals | |
| A Comparison of High Performance Luminaire Programs in the US Market | |
| ABSOLUTE DENSITY AND RELATIVE DENSITY | |
| Accelerated aging by UV fluorescent lamp | |
| Adhesiveness for crash pad applique | |
| Air Infiltration Ratings for Recessed Luminaires | |
| ANALYZER MEXA-110 UTILIZATION | |
| Aniline Point | |
| Anti-corrosion characteristics of lubricating oils | |
| BENCH AND BUCKET SEAT DURABILITY TEST | |
| Best Practices for Metal Halide Lighting Systems Relative to Lamp Rupture Risks | |
| Brinell hardness test - Metallic materials | |
| Brookfield viscositv | |
| Brookfield viscosity | |
| CALCULATED CETANE INDEX OF DISTILLATED FUEL | |
| Calker sealer test | |
| Carbon residue of petroleum products | |
| CHEMICAL ANALYSIS OF ALUMINUM ALLOYS BY THE SPECTRAA-250 PLUS | |
| Chemical Analysis of Aluminum and Aluminum Base Alloys | |
| Chemical Analysis of Carbon Steel, Alloy Steel | |
| Chemical Analysis of Cast Iron | |
| CHEMICAL ANALYSIS OF COPPER ALLOYS BY THE SPECTRAA - 250 PLUS ATOMIC ABSORPTION SPECTROPHOTOMETRIC SYSTEM | |
| CHEMICAL ANALYSIS OF METALS IN ELASTOMERS AND POLYMERS BY SPCTRAA - 250 PLUS ATOMIC ABSORPTION SPECTROPHOTOMETRIC SYSTEM | |
| CHEMICAL ANALYSIS OF METALS IN GREASES BY THE SPCTRAA - 250 PLUS ATOMIC ABSORPTION SPECTROPHOTOMETRIC SYSTEM | |
| CHEMICAL ANALYSIS OF METALS IN HIDRATED ETHYL ALCOHOL BY SPCTRAA - 250 PLUS ATOMIC ABSORPTION SPECTROPOTHOMETRIC SYSTEM | |
| CHEMICAL ANALYSIS OF METALS IN LUBRICANT OILS BY SPECTRAA-250 PLUS ATOMIC ABSORPTION SPECTROPHOTOMETRIC SYSTEM | |
| CHEMICAL ANALYSIS OF ZINC ALLOYS BY THE SPECTRAA - 250 PLUS ATOMIC ABSORPTION SPECTROPHOTOMETRIC SYSTEM | |
| CHEMICAL ANLYSIS OF C. STEEL, ALLOY STEELS AND CASTING IRONS BY SPECTOPHOTOMETRIC | |
| Chemical stabilitv and high temperature stabilitv at brake fluid | |
| Chemical stability and high temperature stability at brake fluid | |
| COLD SCUFFING | |
| Color - macbeth | |
| Color measurement of paint master | |
| Compatibility of Add-on Tube Guards with T-8 Fluorescent Lamps Operating on High Frequency Electronic Ballasts | |
| Compatibility of brake fluid | |
| Compatibility of break fluids | |
| Components of Clad Aluminum Alloy Products | |
| CONE PENETRATION OF LUBRICATING GREASE | |
| Considerations of Field LED Driver Replacement | |
| Controlled Emergency Lighting, a Technical Clarification Bulletin | |
| CORROSION RESISTANCE AND PERFORMANCE OF PARTS AND FEEDING SYSTEMS USED IN GASOLINE FUEL POWERED VEHICLES | |
| CORROSION RESISTANCE AND PERFORMANCE OF PARTS AND FEEDING SYSTEMS USED IN HYDRATED ETHYL ALCOHOL FUEL POWERED VEHICLES | |
| Corrosion test for brake fluid | |
| Corrosion test for engine coolants | |
| CORROSION TEST IN CROME-PLATED PARTS | |
| Corrosion tests in artificial atmospheres - Salt spray tests | |
| CRC Handbook of Laboratory Safety | |
| CREEP BACK CORROSION | |
| CROSS-HATCH ADHESION | |
| Cycle Test to Exhaust System Components | |
| CYLINDER COMPRESSION PRESSURE MEASUREMENTS | |
| Density and Relative Density of Liquids by Digital Density Meter | |
| DENSITY DETERMINATION OF SINTERED METAL STRUCTURAL PARTS | |
| Description of evaluation test of lead-brass coated in sheet steel - terne plate | |
| Designation of microstructure of graphite in cast iron | |
| Determination de \x93P\x94 e \x93Zn\x94 in lubricants oils | |
| Determination of anhydrous ethyl alcohol in gasohol | |
| DETERMINATION OF ANTIMONY AND ARSENIC CONTENT IN LEAD ALLOYS - TITRATION METHOD | |
| Determination of Ash | |
| DETERMINATION OF BISMUTH CONTENT IN LEAD ALLOYS - SPECTROPHOTOMETRIC METHOD | |
| Determination of boiling point | |
| Determination of boron by spectrophotometry - the 1,1 diantrimide method | |
| DETERMINATION OF CA, MN AND ZN IN REVES.PHOSF.COAT. BY SPECTRAA-250 | |
| Determination of calcium carbonate content in thermoplastics | |
| Determination of Carbon and Sulfur by Combustion - Infrared Absorption Method | |
| Determination of carbon black content in rubbers. | |
| Determination of chromium by the peroxydisulfate oxidation - titration method | |
| Determination of chromium by the peroxydisulfate oxidation - titrimetric method | |
| Determination of coating mass and iron content of the Galvannealed coating (Zn/Fe alloy) | |
| Determination of copper by the iodide-thiosulfate titrimetric method | |
| DETERMINATION OF COPPER CONTENT IN LEAD ALLOYS - SPECTROPHOTOMETRIC METHOD | |
| Determination of copper in steels and cast irons - spectrophotometry method | |
| Determination of copper in steels and cast irons - titration method | |
| Determination of corrosivity of petroleum products | |
| Determination of diluent by distilation | |
| Determination of Dynamic Stiffness and Loss Angle of Elastomeric Components | |
| Determination of ethyl alcohol in lubricants oils by distillation | |
| DETERMINATION OF FILLER CONTENT IN RUBBERS - GRAVIMETRIC METHOD | |
| DETERMINATION OF FLASH AND FIRE POINTS BY CLEVELAND OPEN CUP | |
| Determination of Flash Point by Cleveland Open Cup | |
| DETERMINATION OF FOGGING CHARACTERISTICS OF TRIM MATERIALS | |
| Determination of gasoline at ethyl alcohol | |
| Determination of glass fiber content in thermoplastics | |
| DETERMINATION OF GRAPHITE PERCENTAGE IN POLYAMIDES 6.6 | |
| Determination of induction period of gasoline | |
| DETERMINATION OF IRON CONTENT IN GALVANNEALED COATING | |
| Determination of lead in gasoline | |
| Determination of magnesium in aluminum alloys - gravimetric method | |
| Determination of manganese by the peroxydisulfate arsenite - titration method | |
| Determination of manganese in copper alloys - titration method | |
| Determination of melting point of thermoplastics. | |
| Determination of nickel by gravimetry - dimethylglyoxime method | |
| Determination of nickel in steels and cast irons - spectrofotometry method | |
| Determination of niobium by spectrophotometry - the sulphochlorophenol s method | |
| Determination of no volatiles materials in AEH | |
| Determination of Nonmetallic Inclusions | |
| Determination of oxygen and nitrogen by fusion - the inert gas method | |
| DETERMINATION OF P AND ZN IN LUBRICANTS OILS | |
| DETERMINATION OF PB AND SN IN HOT-DIP OR ELETR.PLAT.COAT. BY SPECTRAA-250 | |
| Determination of percentage elongation in sealers and adhesives | |
| Determination of pH of Aqueous Solutions | |
| Determination of phosphorous by spectrophotometry - molibdivanadophospho ric acid method | |
| Determination of phosphorus by spectrophotometry - the molybdenum blue method | |
| Determination of plastic strain ratio - Metallic Materials - Sheet and strip | |
| Determination of plastic strain ratio Metallic Materials Sheet and strip | |
| Determination of PN in gasoline | |
| Determination of PVC amount in organic compounds | |
| DETERMINATION OF QUANTITY OF SURFACE CARBON ON THE SHEET | |
| Determination of residue by evaporation at ethyl alcohol | |
| DETERMINATION OF SELLENIUM CONTENT IN LEAD ALLOYS - SPECTROPHOTOMETRIC METHOD | |
| Determination of silicon by gravimetric method | |
| Determination of silicon by the sodium hydroxide-sulfuric acid (gravimetric) test method | |
| Determination of silicon in steels and cast irons - spectrofotometry method | |
| Determination of sound attenuation characteristic of automotive acoustic insulators | |
| Determination of sulfer in petroleum products | |
| DETERMINATION OF SULFUR CONTENT IN LEAD ALLOYS - SPECTROPHOTOMETRIC METHOD | |
| DETERMINATION OF TALC CONTENT IN THERMOPLASTICS | |
| DETERMINATION OF TELLURIUM IN STEELS AND CAST IRONS | |
| Determination of tensile strain hardening exponent - Sheet and strip - Metallic materials | |
| Determination of tensile strain hardening exponent - Sheet and strip Metallic materials | |
| Determination of the butane working capacity of activated carbon | |
| Determination of the Calculated Cetane Index | |
| Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics | |
| Determination of the peroxide content in hydrocarbon - titration method | |
| Determination of the resistance to wear of automotive interior trim materials | |
| Determination of the talc content in thermoplastics | |
| DETERMINATION OF TIN BY HIPOPHOSPHITE REDUCTION - VOLUMETRIC METHOD | |
| DETERMINATION OF TIN CONTENT IN LEAD ALLOYS - TITRATION METHOD | |
| Determination of titanium by spectrophotometry - the hydrogen peroxide method | |
| Determination of tungsten by spectrophotometry - hydroquinone method | |
| Determination of volume change in sealers and adhesives | |
| Determination of water by the Karl Fischer reagent method | |
| Determination of water in petroleum products by distilation | |
| Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Spectrometry | |
| DETERMINATION OF ZIRCONIUM BY SPECTROPHOMETRY - THE XYLENOL ORANGE METHOD | |
| DETERMINING TENSILE PROPERTIES OF TEXTILES VINYL AND TRIM MATERIALS | |
| DISC WHEEL ROTATIVE FATIGUE TEST | |
| Distillation of Diesel Oil and Gasoline | |
| DISTILLATION OF PETROLEUM PRODUCTS | |
| DISTINCTION OF IMAGE D.O.I. | |
| DROPPING POINT OF LUBRICATING GREASE | |
| DRY FILM THICKNESS | |
| Dynamometer durability | |
| Dynamometer engine set up | |
| Dynamometer engine set-up | |
| Effect on rubber at brake fluid | |
| ELECTRICAL CONDUCTIVITY DETERMINATION BY VWR METER MODEL 604 | |
| Electrical Conductivity in Ethyl Alcohol | |
| Energy Savings with Fluorescent and LED Dimming | |
| Engine coolant stability corrosion inhibitor | |
| ENGINE MASS OBTENTION | |
| Engines run - in | |
| Engines run-in | |
| ENGINES WARM-UP | |
| Equilibrium reflux wet boiling point of brare fluid | |
| Evaporation loss for brake fluid | |
| Existent gum and unwashed gum in fuels | |
| Fatigue Test of Gears, Axles and Bearings in the FWD Transmissions | |
| Flash point by Pensky-Maertens closed tester | |
| Fluidity and appearance at low temperature of break fluid | |
| Fluorescent Dimming Standards Development Report | |
| Fluorescent Lamps and the Environment | |
| Foaming characteristics of lubricating oils | |
| Foaming tendencies of engine coolants | |
| Freezing point of aqueous engine coolants | |
| Fuel Dilution determination of engine oil through FDM | |
| FUEL EXPOSURE RESISTANCE | |
| FWD Output Gear Toothing Fatigue Test | |
| General tests for automotive hoses | |
| Germicidal Irradiation and the Energy Codes | |
| GLOSS | |
| Hardness requirements for Gearshift intermediate lever after heat treatment. | |
| HIDING POWER | |
| HIGH TEMPERATURE RESISTANCE TEST IN THE FUEL TANK | |
| HOSES CLAMP - TEST PROCEDURE | |
| Hot scuffing | |
| HUMIDITY TEST PROCEDURE FOR ELECTRICAL COMPONENTS OF VEHICLES | |
| IDENTIFICATION OF ELASTOMERS, POLYMERS, LUBRICANT OILS, GREASES AND MISCELLANEOUS BY THE FT-IR 16 PC INFRARED SPECTROPHOTOMETRIC SYSTEM | |
| IDENTIFICATION OF FIBERS IN TEXTILES | |
| IDENTIFICATION OF GLASS WOOL OR ROCK WOOL IN INSULATION | |
| Identification of iodine in polyamides | |
| Insolubles in used lubricating oils | |
| Installation Guidelines for Outdoor Luminaires - Grounding Considerations | |
| INTERCOAT ADHESION | |
| INTERCONNECTED POROSITY DETERMINATION OF SINTERED METAL STRUCTURAL PARTS | |
| Interim 2002 Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals | |
| Interim 2003 Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals | |
| Interim 2006 Standard Specifications for Structural Supports for Highway Signs, Luminaires and Traffic Signals | |
| K\xd6NIG HARDNESS | |
| Kinematic Viscosity | |
| LEAD IN GREASE | |
| Lighting Controls Terminology | |
| Low Mercury Controllable Fluorescent Systems | |
| Material temperature resistance used in thermal insulator | |
| Measurement Methods and Performance Variation for Verification Testing of General Purpose Lamps and Systems | |
| MEASUREMENT OF THICKNESS OF METALLIC COATINGS BY THE COULOMETRIC METHOD | |
| Metallic coating - Hot dip galvanized coatings on ferrous materials - Gravimetric determination of the mass per unit area | |
| METALS AND ADDITIVES PERCENTAGE IN LUBRICANTS | |
| Micrographic Determination of the Ferritic Grain Size - Steels | |
| MoS2 percentage determination in thermoplast | |
| NEMA Guide to Emergency Lighting | |
| NEMA Response to IEA 4E Final Report: \x93Solid-State Lighting Annex: Visual Perception under Energy-Efficient Light Sources\x97Detection of the Stroboscopic Effect under Low Levels of SVM\x94 | |
| Neutralization Numbers | |
| NITROGEN LEAKAGE MEASUREMENT | |
| Official Data Publishing | |
| OIL CONSUMPTION MEASUREMENT | |
| Oil separation from lubricating grease | |
| OIL SEPARATION OF LUBRICATING GREASE | |
| Outdoor Lighting and Human/Animal Factors: An Industry Evaluation | |
| Percentage of basis soap ( Li, Na ) in lubricating grease | |
| PERCENTAGE OF BASIS SOAP (LI, NA) IN LUBRICATING GREASE | |
| PERFORMANCE CURVE | |
| Photo-Luminescent Exit Signage \x97 Factual Review | |
| PISTON MARKING | |
| PLASTIC PARTS SCRATCHING RESISTANCE | |
| Polyurethane Foam Application: Lighting Equipment | |
| Pour point of petroleum products | |
| Power Quality Implications of Self-ballasted Lamps in Residences | |
| Predicted Energy Savings from Lighting Systems | |
| PREP.OF FORMALD.AND ACETAL.DERIV.OF THE PURIF.DNPH (2,4-DINITR.) | |
| PREPARATION AND STANDARDIZATION OF 0.1N POTASSIUM PERMANGANATE STANDARD SOLUTION | |
| PREPARATION AND STANDARDIZATION OF 0.1N SODIUM THIOSULFATE | |
| PREPARATION AND STANDARDIZATION OF SODIUM ARSENITE SOLUTION | |
| PROCEDURE FOR CONDITIONING OF MATERIALS TO STANDARD CONDITION OF TEMPERATURE AND RELATIVE HUMIDITY | |
| Procedure for density determination of sealers and adhesives | |
| Procedure for determination of adhesive quantity on the base of finishing panels | |
| PROCEDURE FOR DETERMING COLORFASTNESS TO RUBBING OF TEXTILES AND COATED PLASTICS | |
| Procedure for determing hydrochloric gas content of PVC-based sealing compound | |
| PROCEDURE FOR DETERMING WEAVE DENSITY OF KNITTED FABRICS | |
| PROCEDURE FOR DETERMINING BLOCKING CHARACTERISTICS OF VINYL AND TRIM MATERIALS | |
| Procedure for determining flattening resistance of carpets | |
| Procedure for determining resistance to abrasion of textile and vinyl materials | |
| Procedure for determining resistance to wear of textile and vinyl materials | |
| PROCEDURE FOR DETERMINING SOFTNESS OF TRIM MATERIALS | |
| Procedure for determining tear resistance of carpets | |
| PROCEDURE FOR DETERMINING THE ADHESION BETWEEN COMPONENTS OF COUPLED MATERIALS | |
| PROCEDURE FOR DETERMINING THE CLEANABILITY OF TEXTILES AND PLASTICS | |
| PROCEDURE FOR DETERMINING THE DYE STABILITY OF TEXTILE MATERIALS | |
| PROCEDURE FOR DETERMINING THE HEAT RESISTANCE OF TEXTILES AND TRIM MATERIALS | |
| PROCEDURE FOR DETERMINING THE HUMIDITY RESISTANCE OF TEXTILES AND TRIM MATERIALS | |
| PROCEDURE FOR DETERMINING THE LOSS OF GRAIN OF TRIM MATERIALS | |
| PROCEDURE FOR DETERMINING THE PLIABILITY OF TEXTILES AND COATED PLASTICS | |
| PROCEDURE FOR DETERMINING THE RESISTANCE TO "SPOTTING" OF TRIM MATERIALS BY WATER AND SALINE SOLUTION | |
| PROCEDURE FOR DETERMINING THE RESISTANCE TO THREAD TEAR-OUT OF TRIM MATERIALS | |
| PROCEDURE FOR DETERMINING THE SEAM STRENGTH OF UPHOLSTERY TRIM MATERIALS | |
| PROCEDURE FOR DETERMINING THE STAINING OF TRIM MATERIALS DUE TO SULFUR DIOXIDE (S02) AND HYDROGEN SULFIDE (H2S) | |
| PROCEDURE FOR DETERMINING THE STRETCH AND PERMANENT SET OF TEXTILE AND TRIM | |
| PROCEDURE FOR DETERMINING THE TEAR RESISTANCE OF TEXTILE, VINYL AND TRIM MATERIALS | |
| PROCEDURE FOR DETERMINING THE VOLATILITY (WEIGHT LOSS) OF TRIM MATERIALS | |
| PROCEDURE FOR DETERMINING THICKNESS OF TRIM MATERIALS | |
| Procedure for determining thickness | |
| PROCEDURE FOR DETERMINING WEIGHT PER UNIT AREA | |
| Procedure for identification and determining the fiber content in textiles materials | |
| Procedure for performing Road Simulation Tests | |
| Procedure of plasticizer extraction from plastisol | |
| PURIFICATION OF DNPH (2,4-DINITROPHENYLHY DRAZINE) | |
| QUALIFICATION CRITERIA FOR DIFFERENTIAL HOUSING INTEGRITY | |
| REAR VIEW MIRROR | |
| Remote Phosphor Devices Used in LED Lamps, Engines and Luminaires | |
| Requirement for acceptance of defects on DOHC cylinder head | |
| Requirement for acceptance of defects on SOHC cylinder heads | |
| REQUIREMENT FOR ACCEPTANCE OF SURFACE DEFECTS IN OIL PANS | |
| Requirement for acceptance of surface defects on Bearing Plate | |
| Requirement for acceptance of surface defects on Brake Drums | |
| Requirement for acceptance of surface defects on Camshaft bracket | |
| Requirement for acceptance of surface defects on casting connecting rod | |
| Requirement for acceptance of surface defects on crankshafts | |
| Requirement for acceptance of surface defects on cylinder blocks Family I | |
| Requirement for acceptance of surface defects on cylinder blocks Family II | |
| Requirement for acceptance of surface defects on differential bearing ring | |
| Requirement for acceptance of surface defects on engine brackets | |
| Requirement for acceptance of surface defects on flywheels | |
| Requirement for acceptance of surface defects on Gearshift Cover | |
| Requirement for acceptance of surface defects on Oil Pump Body | |
| Requirement for acceptance of surface defects on Thermostat Housing | |
| Requirement for acceptance of surface defects on Water Pump Body | |
| Requirement for acceptance of surface defects on wheel hubs | |
| Requirements for Acceptance of Surface Defects on Bearing Cap | |
| Requirements for Acceptance of Surface Defects on Brake Disc | |
| Requirements for Acceptance of Surface Defects on Exhaust Manifold | |
| Requirements for acceptance of surface defects on transmission-case | |
| Reserve alkalinity of engine coolants | |
| RESISTANCE TO CLEANING AGENTS | |
| RESISTANCE TO IMPACT SALINE SOLUTION | |
| Resistance to oxidation of brake fluid | |
| RESISTANCE TO STONE IMPACT | |
| RESISTANCE TO SURFACER DETERIORATION BY CHEMICAL ACTION | |
| Rockwell Hardness Test - Metallic Materials - Part 1: Test Method (scales A, B, C, N, T) | |
| Rockwell hardness test - Metallic Materials Part 1: Test method (scales A, B, C, N, T) | |
| SAMPLES PREPARATION FOR THE FT-IR 16PC INFRARED SPECTOPHOTOMETRIC SYSTEM | |
| Saponification number | |
| SCAB CORROSION TEST | |
| Sealing test | |
| SERVICE CLASSIFICATIONS AND DESIGNATIONS FOR LUBRICATING OILS FOR AUTOMOTIVE TYPE ENGINES | |
| Shear Strength for Self Adhesive Parts | |
| SHORT THERMAL CYCLE | |
| Solid State Lighting for Incandescent Replacement\x97Best Practices for Dimming | |
| SOLUBLE PLASTICIZER COMPONENTS EXTRACTION BY HYDRATED ETHYL ALCOHOL | |
| Specific gravity and ethanol content | |
| Spectrophotometric determination of molybdenum by thiocianate-stannous chloride method | |
| Stability of adhesives and sealers | |
| STANDARD SPECIFICATIONS FOR STRUCTURAL SUPPORTS FOR HIGHWAY SIGNS, LUMINAIRES, AND TRAFFIC SIGNALS | |
| Steady stat detonation | |
| Steady state detonation | |
| Steel - Charpy impact test (V-notch) | |
| STRIPPING METHOD OF PHOSPHATE COATINGS ON STEEL ARTICLES - WEIGHT AND COMPOSITION OF THE COATING | |
| Sulfated ash from lubricating oils | |
| Systems Approach for Lighting | |
| TAB, SIGNAL, PLASTIC TAB SET, SIGNAL, PLASTIC | |
| TABLE TOP ASSEMBLIES PLASTIC THERMOSETTING RESIN LAMINATE | |
| TABLEWARE, PLASTIC | |
| Tape adhesion test after water immersion | |
| TAPE, PRESSURE SENSITIVE ADHESIVE IDENTIFICATION | |
| TAPE, PRESSURE SENSITIVE ADHESIVE, PIPE WRAPPING | |
| TAPE, PRESSURE-SENSITIVE ADHESIVE (ALUMINUM-BACKED) | |
| TAPE, PRESSURE-SENSITIVE ADHESIVE (CELLOPHANE AND CELLULOSE ACETATE) | |
| TAPE, PRESSURE-SENSITIVE ADHESIVE, POLYESTER FILM | |
| TAPE, SHIELDING AND IDENTIFICATION, PRESSURE-SENSITIVE | |
| TEMPERATURE RESISTANCE TEST | |
| Tensile test for 9309560 adhesive caulk for bonding stationary glass | |
| Tensile testing at ambient temperature - Metallic materials | |
| Test for determining the staining effect of adhesive and sealers on paint, glass and trim parts | |
| TEST FOR RESIDUAL STRESS EVALUATION IN ARYLIC PARTS | |
| TEST METHOD FOR DETERMINING CRAZING OF VINYL TRIM MATERIALS | |
| TEST METHOD FOR DETERMINING FLAMMABILITY OF MATERIALS | |
| TEST METHOD FOR DETERMINING RESISTANCE TO ODOR PROPAGATION OF TRIM MATERIALS | |
| TEST METHOD FOR DETERMINING TEMPERATURE STABILITY OF TRIM MATERIALS | |
| TEST METHOD FOR DETERMINING THE RESIDUE ON IGNITION (ASH) OF POLYMERIC MATERIALS | |
| TEST METHOD FOR DETERMINING THE WEIGHT PER UNIT AREA OF THE BACKING OF PVC - COATED UPHOLSTERY MATERIALS | |
| Test method for determining the weight per unit area of the backing of PVC \x96 coated | |
| TEST METHOD FOR DETERMINING TOPCOAT ADHESION OF VINYL TRIM MATERIALS | |
| TEST METHOD FOR HATING APPRAISED OF THE MARTENSITE (RETAINED AUSTENITE) | |
| TEST METHOD FOR POWDER CONTENT EVALUATION OF ZN - FE (GALVANNEALED) ROLLED STEEL SHEETS | |
| TEST METHOD FOR WEIGHT OF COATING ON ZN COATED STEEL SHEET | |
| TEST METHOD FOR WEIGHT OF COATING ON ZN/FE COATED | |
| TEST PRESCRIPTION OF RESISTANCE TO WATER AND TO IMPURITIES FOR MANUAL AND AUTOMATIC ANTENNAS | |
| Test prescription of synthetics materials with metallic vaporization | |
| TEST PROCEDURE FOR BRIQUET BRAKE | |
| TEST PROCEDURE FOR FLEXIBLE HOSES USED IN HYDRAULIC BRAKE SYSTEMS | |
| TEST PROCEDURE FOR LAMPS AND HEADLAMPS | |
| TEST PROCEDURE FOR RESIDUAL STRESS IN ABS PARTS | |
| TESTING TO HIGH HUMIDITY ENVIRONMENT | |
| The Effects of Dimming on Color and Efficacy of LED Lamps | |
| The Six Families of Cast Iron | |
| Thermal shock | |
| Thermic stability of lubricating oils | |
| TILE: FLOOR, VINYL-ASBESTOS | |
| Total acidity at ethanol | |
| Transportation; Invest in America; Listening to America; Report on AASHTO\xb4s TEA-21 Reauthorization Regional Forums | |
| TRAY, MESS, COMPARTMENTED (PLASTIC) | |
| TRAY, SERVICE (LAMINATED FIBER GLASS, POLYESTER RESIN) | |
| TRAYS, SERVICE (ALUMINUM AND PLASTIC) | |
| TUBE, NONMETALLIC; POLYVINYL CHLORIDE (PVC), FLEXIBLE (FOR LABORATORY AND MEDICAL USE) | |
| TUBES, DRINKING (PLASTIC) | |
| TUBING, STERILIZATION | |
| TUMBLER, DRINKING (PLASTIC) | |
| TYPE CLEANER, PLASTIC RUBBER TYPE | |
| U.V. RADIATION RESISTANCE | |
| Ultraviolet Radiation From Fluorescent Lamps | |
| UN2911 Labeling and Transportation of Lamps Containing Radioactive Substances | |
| Understanding the Fluorescent Ballast Rule EPCA 10 CFR 430 | |
| Vapor pressure of petroleum products | |
| VERIFICATION OF BENZENE CONT.IN SOLV.BY SIGMA 3B GAS CROMAT. SYSTEM | |
| VERIFICATION OF THE DIDP PURITY BY THE SIGMA 3B GAS CROMATOGRAPHIC SYSTEM | |
| Vickers hardness test - Metallic materials | |
| WATER IMMERSION | |
| Water tolerance for brake fluid | |
| WEAR TABER ABRASER TEST | |
| WEIGHT AND COMPOSITION OF COATING ON LEAD-TIN ALLOY COATED STEEL SHEETS | |
| WEIGHT OF COATING ON ALUMINUM-COATED STEEL SHEETS | |
| WEIGHT OF COATING ON ZINC-COATED STEEL SHEETS | |
| White Paper on the Usage of LED Lamps in Emergency Lighting Systems Having Remote Capacity | |
| Zero Net Energy Buildings and Title 24 Energy Code |
| << Prev | Next >> |