Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
810
820
830
840
850
852
853
854
855
856
857
858
859
860
861
862
863
864
870
880
890
900
910
920
950
1000
1050
1100
1150
1200
1500
1620
| Product Name | Notes |
|---|---|
| A/C and Heater Performance Validation at City Traffic Conditions | |
| A/C and Heater Subjective Performance Validation for Passenger Vehicles at City Traffic Conditions | |
| A/C System Maximum Performance Validation for Passenger Vehicles | |
| AASHTO Guidelines for Preconstruction Engineering Management | |
| Absence of Hexavalent Chrome (VI) Coatings | |
| Accuracy in Patient and Sample Identification; Approved Guideline | |
| Accuracy in Patient and Specimen Identification | |
| Advanced Intelligent Network (AIN) Service Control Point (SCP) Generic Requirements | |
| AINGR: Switch - Service Control Point (SCP)/Adjunct Interface | |
| Air Conditioning System Maximum Performance Validation for Passenger Vehicles | |
| Air Leak Testing for Leak Rate Determination of Powertrain Sealing Systems | |
| Airbag Inflator Design and Supplier Quality Guidelines | |
| Analog Display Services Interface (ADSI) SPCS/Server Generic Requirements | |
| Arbitrary Text Display Specification | |
| Artificial Weathering of Automotive Interior Trim Materials | |
| Assessment of Laboratory Tests When Proficiency Testing is Not Available; Approved Guideline | |
| Automatic Emergency Braking Systems | |
| Automotive Safety Glazings, Requirements | |
| Automotive Upholstery Fabric | |
| B-Side Scrim for Foam Pads for Seating Applications | |
| Basic Cost Accounting for Clinical Services; Approved Guideline | |
| Battery Performance and Test Specification for Cars & Light Duty Trucks | |
| Bellcore Operations Systems Security Requirements | |
| Below Belt Channel Component Technical Specification | |
| Billing Automatic Message Accounting Format (BAF) Generic Requirements | |
| BISDN Inter Carrier Interface (B-ICI) Generic Requirements | |
| Brake Apply Sensing System-Level Specification | |
| Broadband Access Signaling Generic Requirements | |
| Broadband Switching System (BSS) Generic Requirements | |
| Broadband Switching System SS7 Generic Requirements | |
| Cage Nuts | |
| Calibrated Accelerated Life Testing (CALT) | |
| Carpet Materials for Floors | |
| Cast Aluminum Alloys | |
| Cast Stainless Steel for Exhaust Components | |
| CCS Node Generic Requirements to Support Routing Verification Tests | |
| Central Office Environment Detail Engineering Generic Requirements | |
| Chassis Dynamometer Vehicle Brake Noise Evaluation for Electric Vehicles | |
| Clinical Laboratory Safety; Approved Guideline | |
| Clinical Laboratory Waste Management; Approved Guideline | |
| Collection of Capillary Blood Specimens | |
| Collection of Diagnostic Venous Blood Specimens | |
| Color Read-Through of Automotive Textiles | |
| Common Channel Signaling Network Interface Specification (CCSNIS) Supporting SCCP and TCAP | |
| Compact Graphite Iron | |
| Compatibility Information for Interconnection of a Wireless Services Provider and a Local Exchange Carrier Network | |
| Compatibility of Upholstery Materials | |
| Component Technical Specification for Coolant Pressurized Caps | |
| Connector Test and Validation Specification | |
| Coolant Electric Heater Component Technical Specification | |
| Corrosion Protective Coating Zinc Plating/Organic | |
| Cracks caused by foundation movement | |
| Cruising Noise and Vibration | |
| Damage to buildings caused by trees | |
| Data Acquisition and Analysis for Squeak and Rattle Testing | |
| Defogging System Maximum Performance Validation of Windshield, Side Windows and Backlight | |
| Defroster System Maximum Performance Validation for Passenger Vehicles | |
| Defrosting Performance Validation After Snow Ingestion for Passenger Vehicles | |
| Determination of Adhesion of Sealing Compounds | |
| Determination of Coating Mass and Iron Content of Galvannealed Coating (Zn/Fe Alloy) | |
| Determination of Electrostatic Behavior of Automotive Textiles | |
| Determination of Mass per Area | |
| Determination of Resistance to Mildew Growth | |
| Determination of Squeak and Rattle Rating | |
| Determination of Tensile and Elongation Properties of Textile Materials - Modified Strip Method | |
| Determination of Weave and Knit Structural Density of Textile Materials (Yarn Court) | |
| Developing and Managing a Medical Laboratory (Test) Utilization Management Program | |
| Development and Use of Quality Indicators for Process Improvement and Monitoring of Laboratory Quality; Approved Guideline | |
| Dimensional Stability | |
| DOT 4 Hydraulic Brake Fluid | |
| Driveway Noise | |
| DSC and TGA Test Procedure for Battery Raw Material | |
| Dual-Tone Multifrequency Receiver Generic Requirements for End-to-End Signaling Over Tandem-Switched Voice Links | |
| Durability Event: Driveway Ramps | |
| Durability Event: Global Twist Course Facilities | |
| Durability Event: Potholes | |
| Durability Event: Traction Control Gravel Hill | |
| Durability Test for Life Assessment of Engine Radial Shaft Lip Seals | |
| Dynamic Body Airflow | |
| Dynamic Sealing Stress Measurement for Powertrain Sealing Systems | |
| Electrodeposition Primer - Generic Qualifications | |
| Electromagnetic Compatibility and Electrical Safety - Generic Criteria for Network Telecommunications Equipment | |
| Electronic Control Module Traceability and Verification Data Requirements | |
| End of Line Reprocess Materials - Generic Qualification | |
| Engine Oil Pan and Transmission Bottom Pan Gaskets | |
| Epoxy, Reinforced or Filled with Non-Woven Fiber | |
| Essential Elements of a Phlebotomy Training Program | |
| Established Roads Structural Durability Test | |
| Ethylene Glycol Based Automotive Low Electrically Conductive Coolant DEX-COOL\xae EV For Indirect Cooling Electric Vehicle - Premix 50/50 | |
| Ethylene Glycol Based Extended Life Automotive Coolant DEX-COOL | |
| Evaporator Condensate Management Performance Validation for Passenger Vehicles | |
| Exterior Choreography System Test Procedure | |
| Fastener Assembly Aid - Thermoplastic Expandable Patch, Temporary Retaining Element, Preapplied | |
| Fiber Fall - Environmental | |
| Finished Genuine Leather | |
| Flat roofs: assessing and making roof repairs | |
| Fogging Characteristics of Trim Materials | |
| Frame Relay Service Generic Criteria On Operations Interfaces - Information Model And Usage | |
| Framework Generic Requirements for Element Manager (EM) Applications for SONET Subnetworks | |
| Friction Properties of Seat Upholstery Materials | |
| Front and Rear Wipe Wash System Behavior Test Procedure | |
| Front Compartment Access System Vehicle Test Procedur | |
| Frontal Airbag Modules | |
| Full Vehicle Modal Analysis Benchmarking Evaluation Procedure | |
| Gaging of External Hexalobular Driving Feature | |
| Gaging of Hexagon Heads and Nuts with Flange | |
| Gateway Signaling Transfer Point (GSTP) Local Message Screening Test Capability Generic Requirements | |
| General Procedures for Testing Switches | |
| General Requirements for Handling of Technical Terms of Delivery for Plastics | |
| General Requirements GMLAN | |
| General Specification for Air Bag Module Components - Part 3 Roof Rail Air Bag Modules | |
| General Specification for Electrical/Electroni c Component Environmental and Durability Tests | |
| General Specification for Electrical/Electroni c Components - Environmental/Durabi lity | |
| General Specification for Electrical/Electroni c Components and Subsystems - Electromagnetic Compatibility - Global EMC Component/Subsystem Validation Acceptance Process - Requirement | |
| General Specification for Electrical/Electroni c Components and Subsystems - Electromagnetic Compatibility - Requirment Part | |
| General Specification for Electrical/Electroni c Components and Subsystems - Electromagnetic Compatibility - Technical Review Questionnaire - Requirement | |
| General Specification for Electrical/Electroni c Components and Subsystems; Electromagnetic Compatibility; Global EMC Component/Subsystem Validation Acceptance Process | |
| General Specification for Electrical/Electroni c Components and Subsystems; Electromagnetic Compatibility; Technical Review Questionnaire | |
| General Specification for Electrical/Electroni c Components and Subsystems; Electromagnetic Compatibility | |
| General Specification for Thermal Evaluations Using Thermocouple and Infrared Imaging Methods | |
| General Specification for Vehicles Electromagnetic Compatibility Requirement Part | |
| General Specification for Vehicles Electromagnetic Compatibility Verification Part | |
| Generic Human Factors Requirements for Network Terminal Equipment: Preliminary | |
| Generic Operations Interface Requirements: ATM Information Model | |
| Generic Reliability Requirements for Digital Cross-Connect Systems | |
| Generic Requirements For 24-, 48-, 130- and 140-Volt Central Office Power Plant Rectifiers | |
| Generic Requirements for a Customer Sensitive Quality Infrastructure | |
| Generic Requirements for Central Office Cable | |
| Generic Requirements for Central Office Coaxial Cable | |
| Generic Requirements for Coaxial Connectors (Series 59, 6, 7 and 11) | |
| Generic Requirements for Coaxial Distribution Cable | |
| Generic Requirements for Common Channel Signaling (CCS) Network Usage Measurement Functionality | |
| Generic Requirements for Distributing Frame Wire | |
| Generic Requirements for ESD-Controlling Wrist Straps | |
| Generic Requirements for ESD-Protective Circuit Packed Containers | |
| Generic Requirements for ESD-Protective Floor Finishes | |
| Generic Requirements for ESD-Protective Workstations | |
| Generic Requirements for Fiber Optic Clip-on Test Sets | |
| Generic Requirements for Fusion Splice Protectors | |
| Generic Requirements for Gas Tube Protector Units (GTPUS) | |
| Generic Requirements for Inter-City PIC Screened Cable (Filled, ASP Bonded, STALPETH, and Bonded PASP) | |
| Generic Requirements for ISDN Basic Rate Interface (BRI) Calling Name Identification Services | |
| Generic Requirements for ISDN Calling Name Identification Services for Primary Rate Interface | |
| Generic Requirements for ISDN Electronic Key Telephone Service | |
| Generic Requirements for ISDN PRI Call-by-Call Hotel/Motel and Selective Class of Call Screening (SCOCS) Service Selections | |
| Generic Requirements for ISDN PRI Call-by-Call Service Selection for Non-ISDN Foreign Exchange Facilities, Non-ISDN Tie Trunks, OUTWATS, and INWATS | |
| Generic Requirements for Multi-Fiber Optical Connectors | |
| Generic Requirements for Network Outdoor Customer Premises, and Universal Cross-Connecting Wire | |
| Generic Requirements for Non-Metallic Reinforced Aerial Service Wire | |
| Generic Requirements for Operations Interfaces Using OSI Tools - Information Model Overview: Synchronous Optical Network (SONET) Transport Information Model | |
| Generic Requirements for Operations Interfaces Using OSI Tools: Telecommunications Management Network Security Administrations | |
| Generic Requirements for Optical Fiber Amplifiers and Proprietary Dense Wavelength-Division Multiplexed Systems | |
| Generic Requirements for Optical Fiber and Optical Fiber Cable | |
| Generic Requirements for Optical Loss Test Sets | |
| Generic Requirements for Optical Time Domain Reflectometer (OTDR) Type Equipment | |
| Generic Requirements for Passive Optical Components | |
| Generic Requirements for Pedestal Terminal Closures | |
| Generic Requirements for Product Change Notices | |
| Generic Requirements for Reliability Qualification Testing of Printed Wiring Assemblies Exposed to Airborne Hygroscopic Dust | |
| Generic Requirements for Separable Electrical Connectors Used in Telecommunications Hardware | |
| Generic Requirements for Synchronous Optical Network (SONET) File Transfer | |
| Generic Requirements for Thermoplastic Insulated Riser Cable | |
| Generic Requirements for Wireless Service Provider(WSP) Automatic Message Accounting (AMA) | |
| Generic Requirements for Wrist Strap Testers | |
| Generic State Requirements for Network Elements | |
| Generic Supplier Analysis/Development /Validation Process Tasks and Deliverables | |
| GEO TRENDS THE PROGRESS OF GEOLOGICAL AND GEOTECHNICAL ENGINEERING IN COLORADO AT THE CUSP OF A NEW DECADE | |
| GEO-VELOPMENT THE ROLE OF GEOLOGICAL AND GEOTECHNICAL ENGINEERING IN NEW AND REDEVELOPMENT PROJECTS | |
| GEO-VOLUTION The Evolution of Colorado's Geological and Geotechnical Engineering Practice | |
| GEOCHALLENGES RISING TO THE GEOTECHNICAL CHALLENGES OF COLORADO | |
| GEOTECHNICAL APPLICATIONS FOR TRANSPORTATION INFRASTRUCTURE | |
| Global Approval Process for GMW Finish (Chemical Suppliers/Applicator s) | |
| Global Battery Performance and Test Specification for Cars and Light-Duty Trucks | |
| Global Engine Thermal Cycle (GETC) Test \x96 Vendor Version | |
| Global Positioning Systems Inertial Navigation and Integration 2nd Edition | |
| Global Squeak and Rattle Test/Evaluation Vehicle Level | |
| GM Common Circuit List | |
| GMLAN Archtecture and Bus Wiring Requirements | |
| GMLAN Communication Strategy Specification | |
| GMLAN Dual Wire CAN Physical Layer Interface Specification | |
| GMLAN ENHANCED DIAGNOSTIC TEST MODE SPECIFICATION | |
| GMLAN Functional Handler Specification | |
| GMLAN Single Wire CAN Physical Layer Specification | |
| Go Cookbook | |
| Go Programming Blueprints | |
| Good Tuning: A Pocket Guide | |
| GP38-A: QUALITY MANAGEMENT SYSTEM: LEADERSHIP AND MANAGEMENT ROLES AND RESPONSIBILITIES; APPROVED GUIDELINE AND GP38-A EXECUTIVE SUMMARY: QUALITY MANAGEMENT SYSTEM: LEADERSHIP AND MANAGEMENT ROLES AND RESPONSIBILITIES | |
| GPA Midstream Technical Bulletin \x96 Brazed Aluminum Heat Exchangers | |
| GPA Midstream Technical Bulletin \x96 Vortex Induced Vibration in Thermowells | |
| GPSA ENGINEERING DATA (ENGLISH UNIT) * TO ORDER USE HTTPS://GPSA.GPAGLOB AL.ORG/DATABOOK/ORDE R * | |
| GPSA Engineering Data (English Unit) | |
| GPSA ENGINEERING DATA BOOK SI ** COMBO PACK * INCLUDES PDF AND H/C | |
| GPSA ENGINEERING DATA METRIC * TO ORDER USE HTTPS://GPSA.GPAGLOB AL.ORG/DATABOOK/ORDE R * | |
| GPSA Engineering Data Metric | |
| Gray Cast Iron | |
| Grease \x96 PAO/Ester Base Oil, Lithium Thickened | |
| Ground Rods and Ground Rod Couplings | |
| Guidance and Implementation Manual for ANSI/ASSP Z10.0-2019 Occupational Health and Safety Management Systems | |
| Guide for Painting Steel Structures | |
| Guide for Park-and-Ride Facilities | |
| Guide for Pavement Friction | |
| Guide for the Design of Park-and-Ride Facilities | |
| Guide for the Planning, Design, and Operation of Pedestrian Facilities | |
| Guide Specifications for Fatigue Design of Steel Bridges | |
| Guide to Preservation of Highway Bridge Decks | |
| Guidelines for Pavement Management Systems | |
| Guidelines for Performance-Based Seismic Design of Highway Bridges | |
| Heater Objective and Subjective Performance Validation for Passenger Vehicles at City/Suburban Traffic Conditions | |
| Heating System Maximum Performance Validation for Passenger Vehicles | |
| Hexagon Bolts with Flange and M-Point-Heavy Series Product Grade A | |
| Hexagon Bolts with Flange and Pilot Point - Heavy Series Product Grade A | |
| Hexagon Nut and Washer Assemblies with Conical Washer Product Grade A | |
| Hexagon Nut and Washer Assemblies with Plain Washer Product Grade A | |
| Hexagon Nuts Style 1 Product Grade A | |
| Hexagon Nuts with Flange Product Grade A | |
| Hexagon Nuts, Non-Thread | |
| Hexagon Screw and Washer Assemblies with Conical Washer and Pilot Point Product Grade A | |
| Hexagon Screw and Washer Assemblies with Plain Washer and Pilot Point Product Grade A | |
| Hexalobular Bolts with Flange and M-Point Product Grade A | |
| Hexalobular Bolts with Flange and Pilot Point Product Grade A | |
| Hexalobular Socket Pan Head Screw and Washer Assemblies with Plain Washer and Pilot Point | |
| Hexalobular Socket Pan Head Screw and Washer Assemblies with Plain Washer, for Plastics | |
| Hexalobular Socket Pan Head Tapping Screw and Washer Assemblies with Plain Washer Product Grade A | |
| Hexalobular Socket Pan Head Tapping Screws Product Grade A | |
| Hexalobular Socket Round Flanged Head Screws, for Plastics Product Grade A | |
| High Density Polyethylene - Extruded Sheet for Thermoformed Components | |
| High Strength Sheet Steel ((180...550) MPa Yield Strengths) | |
| High Strength Sheet Steel (180 MPa-550 MPa Yield Strengths) | |
| High Voltage Electrical Safety Specification | |
| Highly Accelerated Life Testing | |
| Hood Open Warning Test Procedure | |
| Hot Dip Zinc Coated Sheet Steel | |
| Hot Dip Zinc Coatings for Sheet Steel | |
| Hydraulic Brake Hose Assembly | |
| Idle Noise and Vibration | |
| Improving sound insulation | |
| Improving ventilation in housing | |
| In-Situ Blocked Forces Measurement Procedure | |
| Interface and Functional Requirements for Microprocessor Control of 24-, 48-, 130-, and 140-Volt Central Office Power Plants | |
| Interior Airflow, Subjective Validation of Blower Speed Requirements | |
| Interior Noise During Driveaway Steady-State Operating Conditions | |
| Intermediate Voltage Electrical Safety Specification | |
| Internal painting: tips and hints | |
| ISDN Distinctive Alerting (I-DAL) Generic Requirements | |
| ISDN Selective Call Acceptance (I-SCA) Generic Requirements | |
| ISDN Selective Call Rejection | |
| Laboratory Design; Approved Guideline | |
| Laboratory Documents: Development and Control; Approved Guideline | |
| Laboratory Instrument Implementation, Verification, and Maintenance; Approved Guideline | |
| Laboratory Instruments and Data Management Systems: Design of Software User Interfaces and End-User Software Systems Validation, Operation, and Monitoring; Approved Guideline | |
| Laminate Bond Strength | |
| Large Flange Weld Studs with Pilot Point Product Grade A | |
| Lint Retention of Textile Materials | |
| Low Carbon Sheet Steel | |
| LSSGR: CLASS Feature: Automatic Callback (FSD 01-02-1250) | |
| LSSGR: CLASS Feature: Automatic Recall (FSD 01-02-1260) | |
| LSSGR: CLASS Feature: Distinctive Ringing/Call Waiting (FSD 01-01-1110) | |
| LSSGR: CLASS Feature: Numbering Plan Area Split Management (FSD 30-29-0000) | |
| LSSGR: CLASS Feature: Screening List Editing (FSD 30-28-0000) | |
| LSSGR: CLASS Feature: Selective Call Forwarding (FSD 01-02-1410) | |
| LSSGR: CLASS Feature: Visual Screening List Editing (FSD 30-28-0100) | |
| LSSGR: Generic Requirements for a Dedicated Data Link Interface Between an End Office SPCS and CPE (FSD-04-07-000) | |
| LSSGR: Switch Processing Time Generic Requirements, Section 5.6 | |
| M Point for External Metric Thread, Coarse Pitch Fasteners | |
| Magnesium Alloy Ingots for High Pressure Die Casting | |
| Malleable Cast Iron | |
| Management of Critical- and Significant-Risk Results | |
| Management of Engineering Standards | |
| Management of Nonconforming Laboratory Events; Approved Guideline | |
| Mandrel Bend Test | |
| Mechanical Properties and Material Requirements for Externally Threaded Fasteners | |
| Medium Build Lead Free Electrocoat | |
| Metallic Sheet, Mechanical Properties Testing | |
| Microwave Device Use in the Histology Laboratory; Approved Guideline | |
| Multi Phase and Ultra High Strength Sheet Steel | |
| Multipoint Multimedia Conferencing Control Unit | |
| Natural Weathering Exposure Tests for Interior Trims/Materials | |
| Network Maintenance: Access and Testing - DS3 HCDS TSC/RTU and DTAU Functional Requirements | |
| Non-Electrolytically Applied Zinc Rich Coating | |
| Non-Structural Epoxy Surfacing Films | |
| Operations Generic Criteria for WACS NES | |
| Organic Coating Performance for Electrification and Battery Components | |
| OSSGR Sections 2-5: Overview of Network Plan, Features, and Call Processing | |
| OSSGR Sections 22.1 and 22.2: Internal Databases | |
| OSSGR: Custom Call-Handling Features (FSD 80 Series) | |
| OSSGR: Customer Access Features (FSD 70 Series) | |
| OTGR Section 15.6: Operations Interfaces Using OSI Tools: Test Access Management | |
| OTGR Section 15.8: Generic Operations Interfaces Using OSI Tools: Access and Testing Management | |
| OTGR Section 6.5: Network Maintenance: Access and Testing - Automatic Board-To-Board Testing (ABBT) and DLC Cutover Testing | |
| Overlap Shear Adhesion Test for Stationary Glass Bonding Materials | |
| Passenger Vehicle Developing Road Regions Structural Durability Test | |
| PAVEMENT AND GEOTECHNICAL ENGINEERING FOR TRANSPORTATION | |
| PBT+ASA \x96 Glass Fiber Reinforced, Heat Stabilized | |
| PCS Access Services Interface Specification in Support of PCS Routing Service, PCS Home Database Service, and PCS IS-41 Message Transport Service | |
| Performance Requirements for Bonding and Sealing of Stationary Automotive Glass | |
| Performance Validation of Automatic Climate Control | |
| Performance Validation of Debris Ingestion for HVAC | |
| Phosphating - Generic Qualifications | |
| Pilot Point with Truncated Cone Metric Thread, Coarse Pitch | |
| Planning for Challenges to Clinical Laboratory Operations During a Disaster; A Report | |
| Planning for Laboratory Operations During a Disaster; Approved Guideline | |
| Plastic Fuel Tank Coextruded Multi-Layer | |
| Plasticiser Migration of Sealing Compounds | |
| Platform to Powertrain Electrical Interface Specification Air Conditioning Compressor Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Brakes and Traction Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Cooling Fan Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Cruise Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Displays and Gauges Subsystem | |
| Platform to Powertrain Electrical Interface Specification Engine Power Management Subsystem | |
| Platform to Powertrain Electrical Interface Specification Enhanced Evaporative Emissions and Fuel Subystem | |
| Platform to Powertrain Electrical Interface Specification Exhaust After-Treatment Subsystem | |
| Platform to Powertrain Electrical Interface Specification Four Wheel Drive/All Wheel Drive Controls Subsystem | |
| Platform to Powertrain Electrical Interface Specification General Information, On-Board Diagnostics, Electrical, and GMLAN Serial Data Signal Definitions and Framing Requirements | |
| Platform to Powertrain Electrical Interface Specification Generator Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Post Collision Operation Subsystem | |
| Platform to Powertrain Electrical Interface Specification Power and Ground Subsystem | |
| Platform to Powertrain Electrical Interface Specification Power Take-Off and Fast Idle Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Serial Data Architecture Subsystem | |
| Platform to Powertrain Electrical Interface Specification Starter Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Suspension Control Subsystem | |
| Platform to Powertrain Electrical Interface Specification Transmission Subsystem | |
| Platform to Powertrain Electrical Interface Specification Vehicle Speed and Rough Road Sensing Subsystem | |
| Platform to Powertrain Electrical Interface Specification Vehicle Theft Deterrent Subsystem | |
| Plating Multilayer Coating/Black Type | |
| Plenum-HV/HVA Inlet Water Ingestion (Includes Dynamic Water Separation Test) | |
| Polyamide 6 - Glass Bead/Glass Fiber Reinforced | |
| Polyamide 6 - Glass Fiber Reinforced | |
| Polyamide 6 - Mineral Filled | |
| Polyamide 6 - Mineral/Glass Fiber Reinforced | |
| Polyamide 66 - Glass Fiber Reinforced | |
| Polyamide 66 - Mineral Filled | |
| Polyamide 66 - Mineral/Glass Fiber Reinforced | |
| Polyoxymethylene Copolymer | |
| Polyoxymethylene Homopolymer | |
| Powertrain Cooling Performance Validation for Passenger Vehicles | |
| Preliminary Sprayable Damper - Generic Qualification | |
| Preparation and Testing of Reagent Water in the Clinical Laboratory; Approved Guideline | |
| Preparation and Testing of Reagent Water in the Medical Laboratory | |
| Pressure Alloy Ingots for High Pressure Die Casting | |
| Pressure Die Casing Zinc Alloys | |
| Pressure Die Cast Magnesium Alloys | |
| Prevailing Torque Type All-Metal Hexagon Nuts Style 2 Product Grade A | |
| Prevailing Torque Type All-Metal Hexagon Nuts with Flange Product Grade A | |
| Primer - Generic Qualification | |
| Procedure for Determining Fiber Degradation of Automotive Textiles | |
| Procedure for Determining Laminate Curl Properties of Foam Laminated Materials | |
| Procedure for Determining Pilling Characteristics of Automotive Textile | |
| Procedure for Determining Soil and Cleaner Resistance of Automotive Textiles | |
| Procedure for Determining the Flexibility of Automotive Textiles | |
| Procedure for Neutral Salt Spray Test | |
| Procedure for Standard Conditioning of Organic Materials | |
| Procedures and Devices for the Collection of Diagnostic Capillary Blood Specimens; Approved Standard | |
| Procedures for the Collection of Arterial Blood Specimens; Approved Standard | |
| Procedures for the Collection of Diagnostic Blood Specimens by Venipuncture; Approved Standard | |
| Procedures for the Handling and Processing of Blood Specimens for Common Laboratory Tests; Approved Guideline | |
| Projection Weld Studs with Pilot Point Product Grade A | |
| Protective Finishes - Zinc Phosphate Type | |
| Quality Management System: A Model for Laboratory Services; Approved Guideline | |
| Quality Management System: Continual Improvement; Approved Guideline | |
| Quality Management System: Equipment; Approved Guideline | |
| Quality Management System: Leadership and Management Roles and Responsibilities | |
| Quality Management System: Qualifying, Selecting, and Evaluating a Referral Laboratory; Approved Guideline | |
| Quality System Generic Requirements for Hardware | |
| Quick Knife Adhesion Test for Stationary Glass Bonding Materials | |
| Ravel Resistance | |
| Re-covering pitched roofs | |
| RECENT DEVELOPMENTS IN GEOTECHNICAL ENGINEERING PRACTICE | |
| Record Management for Product Development | |
| Recyclability/Recove rability Design Guide | |
| Refrigerant 1,1,1,2-Tetrafluoroe thane, HFC-134a | |
| Refrigerant Charge Determination | |
| Reliability and Quality Measurements for Telecommunications Systems (RQMS-Wireless) | |
| Repairing and replacing ground floors | |
| Repairing chimneys and parapets | |
| Repairing flood damage | |
| Repairing frost damage | |
| Repairing timber windows | |
| Replacing plasterwork | |
| Requirements for Cranking Motors | |
| Resistance to Fiber Fall - Mechanical | |
| Resistance to Stretch and Set | |
| Restricted and Reportable Substances for Parts | |
| Restricted and Reportable Substances | |
| Ring Control, FSD 01-02-2200 | |
| Road Noise Test Procedure for Interior Noise | |
| Road Vibration: Steady State Vibration | |
| ROCKY MOUNTAIN GEO-CONFERENCE 2014 | |
| ROCKY MOUNTAIN GEO-CONFERENCE 2016 | |
| ROCKY MOUNTAIN GEO-CONFERENCE 2018 | |
| ROCKY MOUNTAIN GEO-CONFERENCE 2021 | |
| ROCKY MOUNTAIN GEO-CONFERENCE 2022 | |
| Rocky Mountain Geo-Conference 2024 | |
| Roof Rail Airbag Modules | |
| Rotary Abrasion Test - Taber Type | |
| Rules and Regulations for Material Specifications | |
| Safety Belt Webbing Technical Specification | |
| Sag and Slide Test | |
| Sagging Resistance of Automotive Textile Materials | |
| Schopper Abrasion Wear Test | |
| Sealer, Paintable Ultralight - Generic Qualification | |
| Sealer, Paintable Underbody - Generic Qualification | |
| Seam Fatigue for Automobile Textiles | |
| Seat Calf Rest Mechanism Component Technical Specification | |
| Security for OSI-Based TMN Interfaces | |
| Selecting and Evaluating a Referral Laboratory; Approved Guideline | |
| Serviceable Snap Ring Static Insertion/Extraction Test Procedure for Suppliers | |
| Sheet Steel Thicknesses And Thickness Tolerances | |
| Side Impact Airbag Modules | |
| SONET Inter-Carrier Interface Physical Layer Generic Criteria For Carriers | |
| SONET Private Line Service Interface Generic Criteria for End Users | |
| Specification for Air Conditioning Pressure Transducer - Low Side | |
| Specification for Thermal/Electrical Insulating Materials Based on Mica | |
| Speed Nuts | |
| Squeak & Rattle Evaluation Entertainment System Driven Squeak & Rattle Testing | |
| Squeak Rattle Deterioration Test for Passenger Cars and Light Truck DPG S&R / Cruz Alta PG | |
| Stainless Steel for Exhaust Applications | |
| Standard Platform-Powertrain Electrical Interface | |
| Static Headspace GC-MS for Interior Materials Interior Emissions | |
| Static Sealing Pressure Measurement for Powertrain Sealing Systems | |
| Studies to Evaluate Patient Outcomes; Approved Guideline | |
| Subjective Performance Validation of Automatic Climate Control | |
| Subsystem/Component Squeak and Rattle Test | |
| Switched Multi-Megabit Data Service (SMDS) Generic Requirements for Exchange Access And Intercompany Serving Arrangements | |
| Tearing Strength of Textile Materials by Trapezoid Method | |
| Terminal Initialization for ISDN Packet-Mode Data Generic Requirements | |
| Test and Validation Fuel Specification | |
| Test for Organic Volatiles in Sealers and Adhesives | |
| Test Method for Determining the Flammability of Interior Trim Materials | |
| Test Method for Determining the Resistance to Odor Propagation of Interior Materials | |
| Test Method for High Strain Rate Characterization of Elastomers in Tension for Use in Finite Element Analysis Modeling | |
| Test Method for Viscoelastic/Viscopl astic Characterization of Elastomers for Use in Finite Element Simulations | |
| Test Methods for Discontinuous Fiber Reinforced Composite Materials for Utilization in Vehicle Finite Element Analysis | |
| Test Properties Definitions and Preparation | |
| The GPS-book - a guide to geometric product specifications and technical drawings | |
| Thermal Cycling Test for Life Assessment of Powertrain Sealing Systems | |
| Thermal Evaluations of Electrical/Electroni c Devices | |
| Thermoplastic Polyolefin \x96 A Blend of Polypropylene and Elastomer for Interior Airbag Chute Applications | |
| Tie Strap for Panel Hole Mounting | |
| Tie Strap for Weld Stud Mounting | |
| Tie Strap | |
| Tin Zinc Plating | |
| Topcoat - Generic Qualification | |
| Training and Competence Assessment; Approved Guideline | |
| Transmission Noise | |
| Trimmed Body Acoustic Sensitivity Test Procedure | |
| Trimmed Structure Modal Analysis Test Procedure | |
| Tubes and Additives for Venous and Capillary Blood Specimen Collection; Approved Standard | |
| Two Part Sealer, Ambient Cure, Generic Qualification | |
| Urinalysis; Approved Guideline | |
| Using Proficiency Testing to Improve the Clinical Laboratory; Approved Guideline | |
| UV-Cured Dielectric Coating | |
| Validation and Verification of Tubes for Venous and Capillary Blood Specimen Collection; Approved Guideline | |
| Validation of Condensation on Interior Components | |
| Validation of HVA/C Airflow at Zero Interior Body Pressure | |
| Validation of Static Body Air Leakage | |
| Vehicle Interior Noise Test Hydraulic Power Steering Noise | |
| Vehicle Interior Noise Tests Fuel Pump Noise | |
| Vehicle Interior Noise Tests Heating and Ventilation Blower Noise | |
| Vehicle Interior Noise Tests On-Road Overall Cruise Noise | |
| Vehicle Noise Tests Powertrain Cooling Fan Noise | |
| Verification of Cover/Door Subcomponent for Frontal/Side/Roof Rail Airbag Modules | |
| Verification of Cranking Motors Verification Part | |
| Verification of Inflator Subcomponent for Frontal/Side/Roof Rail Air Bag Modules | |
| Verification of Initiator Subcomponent for Frontal/Side/Roof Rail Air Bag Modules | |
| Verification of Requirements for Frontal Air Bag Modules | |
| Verification of Requirements for Frontal Airbag Modules | |
| Verification of Requirements for Side Impact/Roof Rail Airbag Modules | |
| Visible Component Vibration Test Procedure | |
| Visual Appearance Assessment | |
| Visual Evaluation of Automotive Trim | |
| Water Repellent Properties of Automotive Textiles | |
| Waterborne Basecoat/One Component Etch Resistant Clearcoat | |
| Weld Nuts, Thread Masking | |
| Weld Studs, Fir Tree Thread | |
| Wind Noise Test Procedure | |
| Wood rot: assessing and treating decay | |
| Zinc Alloy Plating | |
| Zinc-Plating |
| << Prev | Next >> |