Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
37
38
39
40
41
42
43
44
45
46
47
48
49
50
60
70
80
90
100
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| \xc9missions de sources fixes - M\xe9thode automatique pour la d\xe9termination de la concentration en m\xe9thane par d\xe9tection \xe0 ionisation de flamme (FID) | |
| \xc9missions de sources fixes - M\xe9thode manuelle pour la d\xe9termination de la concentration en m\xe9thane par chromatographie en phase gazeuse | |
| \xc9quipement de protection des cultures - Spectres de taille des gouttes des syst\xe8mes d'atomisation - Mesurage et classification | |
| Acetaldehyde for Industrial Use - Determination of Density at 15 Degrees Celsius | |
| Acetaldehyde for Industrial Use - Determination of Water Content - Karl Fischer Method | |
| Adh\xe9sifs - D\xe9termination de la solubilit\xe9 des adh\xe9sifs sensibles \xe0 la pression, solubles dans l'eau ou dans les alcalis | |
| Adhesives \x97 Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens | |
| Adipate Esters for Industrial Use - Determination of Ash - Gravimetric Method | |
| Adipate Esters for Industrial Use - Determination of Ester Content - Volumetric Method | |
| Agglom\xe9r\xe9s expans\xe9s purs de li\xe8ge absorbants acoustiques en dalles | |
| Air Compressor Selection and Application: 1/4 HP Through 30 HP | |
| Aircraft - Zones, Access Doors and Panels - Referencing System | |
| Ammonium Hydrogen Carbonate for Industrial Use (Including Foodstuffs) - Determination of Total Alkalinity - Volumetric Method | |
| Assessment of Discomfort Glare from Daylight in Buildings | |
| BS EN 16265 Draft Pyrotechnic articles - Other pyrotechnic articles - Ignition devices | |
| CAGI B186.1, Safety Code for Portable Air Tools | |
| Compressed Air | |
| Cuivre et alliages de cuivre - Dosage du mangan\xe8se - M\xe9thode spectrophotom\xe9tri que | |
| Diacetone Alcohol for Industrial Use - List of Methods of Test | |
| Draft BS EN 10253-1 Butt-welding pipe fittings. Part 1: Wrought carbon steel for general use and without specific inspection requirements | |
| Draft BS EN 10253-3 Butt-welding pipe fittings. Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements | |
| Draft BS EN 10346 Continuously hot-dip coated steel flat products for cold forming - Technical delivery conditions | |
| Draft BS EN 10365 Hot rolled steel channels, I and H sections - Dimensions and masses | |
| Draft BS EN 1069-1 Water slides. Part 1: Safety requirements and test methods | |
| Draft BS EN 1069-2 Water slides. Part 2: Instructions | |
| Draft BS EN 1090-4 Execution of steel structures and aluminium structures. Part 4: Technical requirements for cold-formed structural steel elements and cold-formed structures for roof, ceiling, floor and wall applications... | |
| Draft BS EN 1090-5 Execution of steel structures and aluminium structures. Part 5: Technical requirements for cold-formed structural aluminium elements and cold-formed structures for roof, ceiling, floor and wall applications... | |
| Draft BS EN 1104 Paper and board intended to come into contact with foodstuffs - Determination of the transfer of antimicrobial constituents | |
| Draft BS EN 1127-1 Explosive atmospheres. Explosion prevention and protection. Part 1: Basic concepts, methodology and design | |
| Draft BS EN 1129 Furniture - Foldaway beds - Safety requirements and test methods | |
| Draft BS EN 115-5 Safety of escalators and moving walks. Part 5: Replacement of existing escalators/moving walks in existing buildings | |
| Draft BS EN 1191 Windows and doors - Resistance to repeated opening and closing - Test method | |
| Draft BS EN 12096 Mechanical vibration. Declaration and verification of vibration emission values | |
| Draft BS EN 12131 Feather and down - Test methods - Determination of the quantitative composition of feather and down (manual method) | |
| Draft BS EN 12186 Gas infrastructure - Gas pressure control stations for transmission and distribution - Functional requirements | |
| Draft BS EN 12266-1 Industrial valves - Testing of metallic valves. Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements | |
| Draft BS EN 12312-20 Aircraft ground support equipment - Specific requirements. Part 20: Electrical ground power units | |
| Draft BS EN 12350-13 Testing fresh concrete. Part 13: Bleeding test. Static and pressure | |
| Draft BS EN 12390-10 Testing hardened concrete. Part 10: Determination of the carbonation resistance of concrete at atmospheric levels of carbon dioxide | |
| Draft BS EN 12390-11 Testing hardened concrete. Part 11: Determination of the chloride resistance of concrete, unidirectional diffusion | |
| Draft BS EN 12390-12 Testing of hardened concrete. Part 12: Determination of the carbonation resistance of concrete - Accelerated carbonation method | |
| Draft BS EN 12390-20 Testing hardened concrete. Part 20: Determination of porosity | |
| Draft BS EN 124-7 Gully tops and manhole tops for vehicular and pedestrian areas. Part 7: Gully tops and manhole tops made of polyamide | |
| Draft BS EN 124-700 Gully tops and manhole tops for vehicular and pedestrian areas. Part 700: Factory production control, thirdparty monitoring and certification for gully tops and manhole tops made... | |
| Draft BS EN 12516-3 Industrial valves - Shell design strength. Part 3: Experimental method | |
| Draft BS EN 12525 Agricultural machinery - Front loaders - Safety | |
| Draft BS EN 12572-1 Artificial climbing structures. Part 1: Safety requirements and test methods for ACS with protection points | |
| Draft BS EN 12572-2 Artificial climbing structures. Part 2: Safety requirements and test methods for bouldering walls | |
| Draft BS EN 12572-3 Artificial climbing structures. Part 3: Safety requirements and test methods for climbing holds | |
| Draft BS EN 12602 Precast autoclaved aerated concrete products | |
| Draft BS EN 12608-1 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods. Part 1: Non-covered PVC-U profiles | |
| Draft BS EN 12608-3 Unplasticized poly(vinyl chloride) (PVC-U) profiles for the fabrication of windows and doors - Classification, requirements and test methods. Part 3: PVC-U profiles covered with paint | |
| Draft BS EN 12664 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Dry and... | |
| Draft BS EN 12666-1 Plastics piping systems for non-pressure underground drains and sewers - Polyethylene (PE). Part 1: Specifications for pipes, fittings and the system | |
| Draft BS EN 12667 Thermal performance of building materials and products - Determination of thermal resistance by means of guarded hot plate and heat flow meter methods - Products of... | |
| Draft BS EN 12680-4 Founding - Ultrasonic testing. Part 4: Phased array ultrasonic testing of steel castings | |
| Draft BS EN 12681-1 Founding - Radiographic testing. Part 1: Film techniques | |
| Draft BS EN 12681-2 Founding - Radiographic testing. Part 2: Techniques with digital detectors | |
| Draft BS EN 12697-10 BS Bituminous mixtures - Test methods. Part 10: Compactability | |
| Draft BS EN 12697-13 Bituminous mixtures - Test methods. Part 13: Temperature measurement | |
| Draft BS EN 12697-14 Bituminous mixtures - Test methods. Part 14: Water content | |
| Draft BS EN 12697-17 Bituminous mixtures - Test methods. Part 17: Particle loss of porous asphalt specimens | |
| Draft BS EN 12697-18 Bituminous mixtures. Test methods. Part 18: Binder drainage | |
| Draft BS EN 12697-23 Bituminous mixtures - Test methods. Part 23: Determination of the indirect tensile strength of bituminous specimens | |
| Draft BS EN 12697-27 Bituminous mixtures - Test methods. Part 27: Sampling | |
| Draft BS EN 12726 Glass packaging - Neck finishes with a bore diameter of 18,5 mm for internal sealing and tamper evident capsules | |
| Draft BS EN 12778 Cookware - Pressure cookers for domestic use | |
| Draft BS EN 12814-6 Testing of welded joints of thermoplastics semi-finished products. Part 6: Low temperature tensile test | |
| Draft BS EN 12831-1 Energy performance of buildings - Method for calculation of the design heat load. Part 1: Space heating load, Module M3-3 | |
| Draft BS EN 12929-1 Safety requirements for cableway installations designed to carry persons. General requirements. Part 1: Requirements for all installations | |
| Draft BS EN 12939 Thermal performance of building materials and products. Determination of thermal resistance by means of guarded hot plate and heat flow meter methods. Thick products of high... | |
| Draft BS EN 13001-3-6 Cranes - General design. Part 3-6: Limit states and proof of competence of machinery - Hydraulic cylinders | |
| Draft BS EN 13037 Soil improvers and growing media - Determination of pH | |
| Draft BS EN 13038 Soil improvers and growing media - Determination of electrical conductivity | |
| Draft BS EN 13039 Soil improvers and growing media - Determination of organic matter content and ash | |
| Draft BS EN 13040-1 Soil improvers and growing media - Sample preparation. Part 1: Sample preparation for chemical and physical tests, determination of dry matter content, moisture content and laboratory... | |
| Draft BS EN 13084-2 Free-standing chimneys. Part 2: Concrete chimneys | |
| Draft BS EN 13100-3 Non destructive testing of welded joints in thermoplastics semifinished products. Part 3: Ultrasonic testing | |
| Draft BS EN 13126-19 Building hardware - Hardware for windows and door-height windows - Requirements and test methods Part 19: Sliding closing devices | |
| Draft BS EN 13135 Cranes - Safety - Design - Requirements for equipment | |
| Draft BS EN 13157 Cranes - Safety - Hand powered cranes | |
| Draft BS EN 13160-2 Leak detection systems. Part 2: Requirements and test/assessment methods for pressure and vacuum systems | |
| Draft BS EN 13160-3 Leak detection systems. Part 3: Requirements and test/assessment methods for liquid systems for tanks | |
| Draft BS EN 13160-4 Leak detection systems. Part 4: Requirements and test/assessment methods for sensor-based leak detection systems | |
| Draft BS EN 13160-7 Leak detection systems. Part 7: Requirements and test/assessment methods for interstitial spaces, leak detection linings and leak detection jackets | |
| Draft BS EN 13223 Safety requirements for cableway installations designed to carry persons -Drive systems and other mechanical equipment | |
| Draft BS EN 13238 BS Reaction to fire tests for building products - Conditioning procedures and general rules for selection of substrates | |
| Draft BS EN 13381-11 Test methods for determining the contribution to the fire resistance of structural members. Part 11: Applied protection to solid steel bars in tension based on mechanically... | |
| Draft BS EN 13384-1 Chimneys - Thermal and fluid dynamic calculation methods. Part 1: Chimneys serving one combustion appliance | |
| Draft BS EN 13586 Cranes - Access | |
| Draft BS EN 1364-1 Fire resistance tests for non-loadbearing elements. Part 1: Walls | |
| Draft BS EN 1364-5 Fire resistance tests for non-loadbearing elements. Part 5: Air transfer grilles | |
| Draft BS EN 13650 Soil improvers and growing media - Digestion by aqua regia for subsequent determination of elements | |
| Draft BS EN 13651 Soil improvers and growing media - Extraction of calcium chloride/DTPA (CAT) soluble nutrients | |
| Draft BS EN 13654-1 Soil improvers and growing media - Determination of nitrogen. Part 1: Modified Kjeldahl method | |
| Draft BS EN 13654-2 Soil improvers and growing media - Determination of nitrogen. Part 2: Dumas method | |
| Draft BS EN 13670 Execution of concrete structures | |
| Draft BS EN 137 Respiratory protective devices - Self-contained open-circuit compressed air breathing apparatus with full face mask - Requirements, testing,marking | |
| Draft BS EN 1370 Founding - Examination of surface condition | |
| Draft BS EN 13807 Transportable gas cylinders - Battery vehicles and multiple-element gas containers (MEGCs) - Design, manufacture, identification and testing | |
| Draft BS EN 13832-1 Footwear protecting against chemicals. Part 1: Terminology and test methods | |
| Draft BS EN 13832-2 Footwear protecting against chemicals. Part 2: Requirements for limited contact with chemicals | |
| Draft BS EN 13832-3 Footwear protecting against chemicals. Part 3: Requirements for prolonged contact with chemicals | |
| Draft BS EN 13953 LPG equipment and accessories. Pressure relief valves for transportable refillable cylinders for Liquefied Petroleum Gas (LPG) | |
| Draft BS EN 14015 Specification for the design and manufacture of site built, vertical, cylindrical, flat-bottomed, above ground, welded, steel tanks for the storage of liquids at ambient temperature and... | |
| Draft BS EN 14021 Stone shields for off-road motorcycling suited to protect riders against stones and debris - Requirements and test methods | |
| Draft BS EN 14059 Decorative oil lamps - Safety requirements and test methods | |
| Draft BS EN 1422 Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods | |
| Draft BS EN 14363-1 Railway applications - Testing and simulation for the assessment of running characteristics of railway vehicles operated on the heavy rail network. Part 1: General | |
| Draft BS EN 14363-2 Railway applications. Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network. Part 2: Safety against derailment on... | |
| Draft BS EN 14363-3 Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network. Part 3: Stationary tests not... | |
| Draft BS EN 14363-4 Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network. Part 4: On-track testing | |
| Draft BS EN 14363-5 Railway applications - Testing and simulation for the acceptance of running characteristics of railway vehicles operated on the heavy rail network. Part 5: Calculations/Simulat ions | |
| Draft BS EN 14519 Solid softwood panelling and cladding. Machined profiles with tongue and groove | |
| Draft BS EN 14564 Tanks for transport of dangerous goods - Terminology | |
| Draft BS EN 1459-7 Rough-terrain trucks - Safety requirements and verification. Part 7: Electrification | |
| Draft BS EN 14664 Chemicals used for treatment of water intended for human consumption -Iron (III) sulfate, solid | |
| Draft BS EN 14679 Execution of special geotechnical works. In-Situ Soil Mixing | |
| Draft BS EN 1490 Building valves - Combined temperature and pressure relief valves - Tests and requirements | |
| Draft BS EN 14906 Leather - Leather for automotive - Test methods and testing parameters | |
| Draft BS EN 14951 Solid hardwood panelling and cladding - Machined profiles | |
| Draft BS EN 14975 Loft ladders - Requirements, marking and testing | |
| Draft BS EN 1501-1 Refuse collection vehicles - General requirements and safety requirements. Part 1: Rear loaded refuse collection vehicles | |
| Draft BS EN 1501-2 Refuse collection vehicles - General requirements and safety requirements. Part 2: Side loaded refuse collection vehicles | |
| Draft BS EN 1501-3 Refuse collection vehicles - General requirements and safety requirements. Part 3: Front loaded refuse collection vehicles | |
| Draft BS EN 1501-5 Refuse collection vehicles - General requirements and safety requirements. Part 5: Lifting devices for refuse collection vehicles | |
| Draft BS EN 15011 Cranes \x97 Bridge and gantry cranes | |
| Draft BS EN 15056 Cranes - Requirements for container handling spreaders | |
| Draft BS EN 15146 Solid softwood panelling and cladding - Machined profiles without tongue and groove | |
| Draft BS EN 15181 Measuring method of the energy consumption of gas fired ovens | |
| Draft BS EN 15199-4 Petroleum products - Determination of boiling range distribution by gas chromatography method. Part 4: Light fractions of crude oil | |
| Draft BS EN 1520 Precast lightweight concrete products with an open structure | |
| Draft BS EN 15269-12 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware. Part 12:... | |
| Draft BS EN 15312 Free access multi-sports equipment - Safety requirements and test methods | |
| Draft BS EN 15330-6 Surfaces for sports areas - Synthetic turf sports surfaces. Part 6: Specification for synthetic turf carpets | |
| Draft BS EN 15383 Plastics piping systems for drainage and sewerage - Glassreinforced thermosetting plastics (GRP) based on polyester resin (UP) - Manholes and inspection chambers | |
| Draft BS EN 1559-3 Founding - Technical conditions of delivery. Part 3: Additional requirements for iron castings | |
| Draft BS EN 15594 Railway applications - Infrastructure - Restoration of rails by electric arc welding | |
| Draft BS EN 1564 Founding - Ausferritic spheroidal graphite cast irons | |
| Draft BS EN 15665 Ventilation for buildings - Ventilation systems in residential buildings - Design | |
| Draft BS EN 1568-1 Fire extinguishing media - Foam concentrates. Part 1: Specification for medium expansion foam concentrates for surface application to water-immiscible liquids | |
| Draft BS EN 1568-2 Fire extinguishing media - Foam concentrates. Part 2: Specification for high expansion foam concentrates for surface application to water-immiscible liquids | |
| Draft BS EN 1568-3 Fire extinguishing media - Foam concentrates. Part 3: Specification for low expansion foam concentrates for surface application to water-immiscible liquids | |
| Draft BS EN 1568-4 Fire extinguishing media. Foam concentrates. Part 4: Specification for low expansion foam concentrates for surface application to water-miscible liquids | |
| Draft BS EN 15721 Ethanol as a blending component for petrol - Determination of higher alcohols, methanol and other impurities - Gas chromatographic method | |
| Draft BS EN 15723 Railway applications - Closing and locking devices for payload protecting devices of freight wagons | |
| Draft BS EN 15767-1 Portable equipment for projecting extinguishing agents and firefighting support operations - Portable monitors. Part 1 : General requirements for portable monitor assemblies | |
| Draft BS EN 15767-2 Portable equipment for projecting extinguishing agents and firefighting support operations - Portable monitors. Part 2: Water nozzles | |
| Draft BS EN 15767-3 Portable equipment for projecting extinguishing agents and firefighting support operations - Portable monitors. Part 3: Foam devices | |
| Draft BS EN 15848 Water conditioning equipment inside buildings - Adjustable chemical dosing systems - Requirements for performance, safety and testing | |
| Draft BS EN 15877-2 Railway applications - Markings of railway vehicles. Part 2: External markings on coaches, motive power units, locomotives and railbound construction and maintenance machines | |
| Draft BS EN 16055 BS Leather - Raw bovine hides and skins - Description, presentation and preservation | |
| Draft BS EN 16087-1 Soil improvers and growing media - Determination of the aerobic biological degradation rate of organic matter. Part 1: Oxygen uptake rate (OUR) | |
| Draft BS EN 16087-2 Soil improvers and growing media - Determination of the aerobic biological degradation rate of organic matter. Part 2: Self heating test for compost | |
| Draft BS EN 16150 Water quality - Guidance on pro-rata multi-habitat sampling of benthic macroinvertebrates from rivers and streams | |
| Draft BS EN 16186-9 Railway applications - Driver's cabs. Part 9 : External visibility for metro vehicles | |
| Draft BS EN 16202 Compost and digestate - Determination of the content of macroscopic impurities and stones | |
| Draft BS EN 1621-4 Motorcyclists' protective clothing against mechanical impact. Part 4: Motorcyclists' inflatable protectors - Requirements and test methods | |
| Draft BS EN 16282-1 Equipment for commercial kitchens - Components for ventilation in commercial kitchens Part 1: General requirements including calculation method | |
| Draft BS EN 16319 Inorganic fertilizers and liming materials - Determination of specific elements. Determination of cadmium, chromium, copper, lead, nickel and zinc by inductively coupled plasma-atomic emission spectrometry (ICP-AES)... | |
| Draft BS EN 16432-4 BS Railway applications - Ballastless track systems. Part 4: Special ballastless track systems for attenuation of vibration | |
| Draft BS EN 16447 Explosion isolation flap valves | |
| Draft BS EN 16452 Railway applications. Braking. Brake blocks | |
| Draft BS EN 16589-2 Laboratory local exhaust devices - Articulated extraction arms. Part 2: Commissioning and on-site testing | |
| Draft BS EN 16630 Permanently installed outdoor fitness equipment - Safety requirements and test methods | |
| Draft BS EN 16647-2 Alcohol powered flueless fireplaces - Safety requirements and test methods. Part 2: Automatically operated decorative fireplaces for domestic use | |
| Draft BS EN 16715 Liquid petroleum products - Determination of ignition delay and derived cetane number (DCN) of middle distillate fuels - Ignition delay and combustion delay determination using a... | |
| Draft BS EN 16716 Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods | |
| Draft BS EN 16727-2-1 Railway applications - Infrastructure- Noise barriers and related devices acting on airborne sound propagation - Non-acoustic performance. Part 2-1: Mechanical performance under dynamic loadings due to... | |
| Draft BS EN 16728 LPG equipment and accessories - Transportable refillable LPG cylinders other than traditional welded and brazed steel cylinders - Periodic inspection | |
| Draft BS EN 16730 Railway applications - Track - Concrete sleepers and bearers with under sleeper pads | |
| Draft BS EN 16755 Classes of fire-retardant treated wood products in interior and exterior end use applications - Reaction to fire performance | |
| Draft BS EN 16834 Railway applications - Braking - Brake performance | |
| Draft BS EN 16842-11 Powered industrial trucks - Visibility - Test methods and verification. Part 11: Pallet stacking trucks (rider controlled) | |
| Draft BS EN 16851 Cranes - Light crane systems | |
| Draft BS EN 16931-1 Electronic invoicing. Part 1: Semantic data model of the core elements of an electronic invoice | |
| Draft BS EN 17074 Sustainability of construction works - Environmental product declarations - Product Category Rules for flat glass and channel shaped glass products | |
| Draft BS EN 17124 Hydrogen fuel - Product specification and quality assurance for hydrogen refuelling points dispensing liquid or gaseous hydrogen - Proton exchange membrane (PEM) fuel cell applications for... | |
| Draft BS EN 17161 Design for All approach - Managing accessibility of products and services | |
| Draft BS EN 17206-1 Entertainment technology. Part 1: Machinery for stages and other production areas - Safety requirements and inspections | |
| Draft BS EN 17206-3 Entertainment technology. Part 3: Unmanned aircraft systems (UAS/Drones) for stages and other production areas. Safety requirements and inspections | |
| Draft BS EN 17210 Accessibility and usability of the built environment - Requirements and recommendations | |
| Draft BS EN 1729-1 Furniture - Chairs and tables for educational institutions. Part 1: Functional dimensions | |
| Draft BS EN 17383 Road traffic noise reducing devices - Sustainability of construction works - Environmental product declarations - Product Category Rules for road traffic noise reducing devices | |
| Draft BS EN 17420 Railway applications - Vehicle front design for trams with respect to pedestrian safety | |
| Draft BS EN 17542-4 Earthworks - Geotechnical laboratory tests. Part 4: Test method for measurement of collapse potential of soils | |
| Draft BS EN 17542-5 Earthworks - Geotechnical laboratory tests. Part 5: Test method for measurement of one-dimensional swelling of soils under oedometric condition | |
| Draft BS EN 17968 Rough-terrain variable-reach tractors - Safety requirements and verification for permanently mounted equipment | |
| Draft BS EN 18000-3 Animal health diagnostic analyses - Control of in vitro diagnostic reagents. Part 3: Reagents for PCR techniques | |
| Draft BS EN 18051 Automotive fuels - Determination of content of butoxy-benzene in middle distillates - Gas chromatographic method using a flame ionization detector (GC-FID) | |
| Draft BS EN 18068 Agricultural machinery - Safety - Compact carriers | |
| Draft BS EN 18069 Water quality - Minimum requirements for the selection, installation, validation, and operation of continuous measuring devices | |
| Draft BS EN 18126 Outdoor gas appliances - Additional provisions for 2nd family gas use | |
| Draft BS EN 18136 Ground limestone for concrete. Part 1: Definition, specifications and conformity criteria | |
| Draft BS EN 18142 Self-loading mobile concrete mixers - Safety requirements and verification | |
| Draft BS EN 18146 Railway applications - Infrastructure - Machines without rail wheels, and associated equipment, intended for work on railway infrastructure - Technical and safety requirements for working. | |
| Draft BS EN 18151 Refrigerators and freezers for laboratory and medical applications - Terminology, requirements, testing | |
| Draft BS EN 18152 Mountaineering equipment - Interfaces between ski mountaineering boots and clip-on binding crampons - Requirements and test methods | |
| Draft BS EN 18154 Hyperloop systems - Vocabulary and definition | |
| Draft BS EN 18156 Tactile lettering - Requirements on the presentation and application of Braille and raised characters | |
| Draft BS EN 18158 Waste management - Mobile IT systems - Requirements for the XML interface Office-Mobile | |
| Draft BS EN 18159 Double skin metal faced insulating sandwich panels for roofing and cladding - Environmental Product Declarations - Product category rules complementary to EN 15804 for double skin... | |
| Draft BS EN 18161 Water quality - Guidance standard on freshwater mussel monitoring and assessment | |
| Draft BS EN 18162 Building Information Modelling (BIM) - Digital twins applied to the built environment - Concept and definitions | |
| Draft BS EN 18164 Wellness facilities for public use - Climated rooms - Requirements | |
| Draft BS EN 18166 Hyperloop systems - General requirements | |
| Draft BS EN 18167 Quality along the patient pathway in medical imaging in Radiology services | |
| Draft BS EN 18168 Ambient air - Biomonitoring with higher plants - Method of the standardised grass exposure | |
| Draft BS EN 18171 Railway applications - Railway Rolling stock. Digital Freight Automatic Coupler - Performance requirements specific interface geometry and test method | |
| Draft BS EN 18177 Circular economy in the construction sector - Framework, principles, and definitions | |
| Draft BS EN 18178-1 Respiratory infection prevention devices for self- and third-party protection. Part 1: Requirements and marking | |
| Draft BS EN 18178-2 Respiratory infection prevention devices for self- and third-party protection. Part 2: Test methods | |
| Draft BS EN 18178-5 Respiratory infection prevention devices for self- and third-party protection. Part 5: Classification | |
| Draft BS EN 18179 Food authenticity - Method for detecting previously frozen poultry meat by determination of HADH activity | |
| Draft BS EN 1818 Pumps - Specification for Gland Packings manufactured from Yarns and Ribbons | |
| Draft BS EN 18184 Financial services. Specification of QR codes for mobile initiated (instant) credit transfers under PSD2 requirements | |
| Draft BS EN 18185 Sustainability of construction works - Environmental product declarations. Product Category Rules for precast lightweight concrete with an open structure and precast autoclaved aerated concrete | |
| Draft BS EN 18189 Rooflights and roof hatches. Environmental Product Declarations. Complementary product category rules (cPCR) to EN 15804 | |
| Draft BS EN 18190 Precast concrete products - Performance assessment and declaration | |
| Draft BS EN 18191 Industrial valves. Additional requirements for metallic valves for hydrogen application | |
| Draft BS EN 18192 Masonry products - Environmental product declarations for masonry units - Product category rules complementary to EN 15804:2012+A2:2019 | |
| Draft BS EN 18196 Algae and algae products - Determination of inorganic arsenic in algae and algae products by anion-exchange (HPLC-ICP-MS) | |
| Draft BS EN 18197 Algae and algae products - Determination of the amino acid profile of micro- and macroalgae | |
| Draft BS EN 18198 Algae and algae products - Nitrogen content measurement and protein content calculation for micro- and microalga | |
| Draft BS EN 18199 Leather - Essential requirements for leather traceability | |
| Draft BS EN 18204 Algae and algae products - Determination of the phycocyanin content in Arthrospira (Spirulina) | |
| Draft BS EN 18205 Qualification of Welding Procedures for Plastic Materials | |
| Draft BS EN 18206 Algae and algae products. Methods of sampling and analysis - Determination of beta carotene, fucoxanthin and lutein content in microalgae | |
| Draft BS EN 18207 Algae and algae products. Determination of the Uronic Acids Content of Brown Seaweed and Alginate Products | |
| Draft BS EN 18208 Liquid-to-liquid single-phase heat exchangers - Test procedure for determining performance | |
| Draft BS EN 18210 Algae and algae Products - Determination of the fatty acid composition | |
| Draft BS EN 18213-2 District heating and district cooling pipes - Bonded single and twin pipe systems for directly buried hot and cold water networks. Part 2: Qualification testing of... | |
| Draft BS EN 18215 Innovation management professionals - Competence requirements | |
| Draft BS EN 18216 Digital Product Passport \x96 Data Exchange Protocols | |
| Draft BS EN 18218-1 Food authenticity - Non-targeted testing methods. Part 1: General considerations and definitions | |
| Draft BS EN 18219 Digital product passport - Unique identifiers | |
| Draft BS EN 18220 Digital product passport - Data Carriers | |
| Draft BS EN 18221 Digital product passport - data storage, archiving, and data persistence | |
| Draft BS EN 18222 Digital Product Passport - Application Programming Interfaces (APIs) for the product passport lifecycle management and searchability | |
| Draft BS EN 18223 Digital Product Passport - System interoperability | |
| Draft BS EN 18225 Feather and down - Composition labelling of processed feathers and down blended with other materials for filling purposes | |
| Draft BS EN 18226 Feather and down - Test methods - Determination of the quantitative composition of feather and down blended with other materials | |
| Draft BS EN 18232 Chimneys - Environmental product declarations - Product Category Rules for products for chimneys | |
| Draft BS EN 18233 Determination of characteristic load resistance and characteristic plate stiffness of plate anchors in the ETICS kit | |
| Draft BS EN 18234 Modular mechanical locked floor coverings for floating installation - Underlays - Specification, requirements and test methods | |
| Draft BS EN 18235-1 Trusted Data Transactions. Part 1: Terminology, concepts and mechanisms | |
| Draft BS EN 18236 Pulp, paper and board - Determination of the migration of polycyclic aromatic hydrocarbons (PAH) into food simulants | |
| Draft BS EN 18239 Digital Product Passport - access rights management, information system security, and business confidentiality | |
| Draft BS EN 18243 Modular mechanical locked floor coverings for floating installation - Evaluation of the thermal behaviour by way of hot spot testing | |
| Draft BS EN 18247-1 Performance testing of on-site non-potable water systems. Part 1: Greywater systems | |
| Draft BS EN 18250 Soil improvers and growing media - Plugs - Determination of the dimensions, volume and bulk density | |
| Draft BS EN 18251 Soil improvers and growing media - Determination of phosphonate content | |
| Draft BS EN 18252 Soil improvers and growing media - Determination of the chloride content | |
| Draft BS EN 18253 Soil improvers and growing media - Determination of total organic carbon by dry combustion | |
| Draft BS EN 18254 Soil improvers and growing media - Determination of the inorganic arsenic content | |
| Draft BS EN 18255 Soil improvers and growing media - Determination of organic nitrogen | |
| Draft BS EN 18256 Digestate - Determination of the residual biogas potential | |
| Draft BS EN 18257 Soil improvers and growing media - Determination of chromium(VI) | |
| Draft BS EN 18258 Soil improvers and growing media - Determination of the mercury content | |
| Draft BS EN 18259 Soil improvers and growing media - Determination of aqua regia soluble elements | |
| Draft BS EN 18261 Compost and digestate - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) | |
| Draft BS EN 18286 Artificial intelligence - Quality management system for EU AI Act regulatory purposes | |
| Draft BS EN 1846-3 Firefighting and rescue service vehicles. Part 3: Permanently installed equipment - Safety and performance | |
| Draft BS EN 1865-1 Patient handling equipment used in ambulances. Part 1: General stretcher systems and patient handling equipment | |
| Draft BS EN 1868 Personal fall protection equipment. List of equivalent terms | |
| Draft BS EN 1915-2 Aircraft ground support equipment - General requirements. Part 2: Stability and strength requirements, calculations and test methods | |
| Draft BS EN 1918-1 Gas infrastructure. Underground gas storage. Part 1: Functional recommendations for storage in aquifers | |
| Draft BS EN 1918-2 Gas infrastructure - Underground gas storage. Part 2: Functional recommendations for storage in oil and gas fields | |
| Draft BS EN 1918-3 Gas infrastructure - Underground gas storage. Part 3: Functional recommendations for storage in solution-mined salt caverns | |
| Draft BS EN 1918-4 Gas infrastructure - Underground gas storage. Part 4: Functional recommendations for storage in rock caverns | |
| Draft BS EN 1918-5 Gas infrastructure - Underground gas storage. Part 5: Functional recommendations for surface facilities | |
| Draft BS EN 196-10 Methods of testing cement. Part 10: Determination of the water-soluble chromium (VI) content of cement | |
| Draft BS EN 197-10 Draft Cement. Part 10: Assessment of conformity regarding water-soluble chromium (VI) content | |
| Draft BS EN 1993-7 Eurocode 3 - Design of steel structures. Part 7: Sandwich panels | |
| Draft BS EN 203-2-3 Gas heated catering equipment. Part 2-3: Specific requirements. Boiling pans and pasta cookers | |
| Draft BS EN 203-2-8 Gas heated catering equipment. Part 2-8: Specific requirements - Brat pans | |
| Draft BS EN 2084 Aerospace series. Cables, electrical, general purpose, with conductors in copper or copper alloy - Technical specification | |
| Draft BS EN 212 Wood preservatives - General guidance on sampling and preparation for analysis of wood preservatives and treated timber | |
| Draft BS EN 2133 Aerospace series - Cadmium plating of steels with specified tensile strength = 1 450 MPa, copper, copper alloys and nickel alloys | |
| Draft BS EN 2243-7 Aerospace series - Structural adhesives - Test methods. Part 7: Determination of the flow of adhesive film | |
| Draft BS EN 2283 Aerospace series - Testing of aircraft wiring | |
| Draft BS EN 295-8 Vitrified clay pipe systems for drains and sewers. Part 8: Requirements for the use of vitrified clay components in the rehabilitation of drainage systems and conditions... | |
| Draft BS EN 3-11 Portable fire extinguishers. Part 11: Performance, requirements, test method and marking for EN 3-7 extinguishers suitable to be used on lithium-ion battery fires | |
| Draft BS EN 3-7 Portable fire extinguishers. Part 7: Characteristics, performance requirements and test methods | |
| Draft BS EN 3197 Aerospace series - Design and installation of aircraft electrical and optical interconnection systems | |
| Draft BS EN 3293 Aerospace series - Bolts, T-head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated - Classification: 1 275 MPa/650 \xb0C... | |
| Draft BS EN 3327 Aerospace series - Bolts, double hexagon head, close tolerance, medium thread length, in heat resisting nickel base alloy NI-P100HT (Inconel 718), uncoated -Classification: 1 275 MPa/650... | |
| Draft BS EN 341 Personal fall protection equipment - Descender devices for rescue | |
| Draft BS EN 3475-505 Aerospace series - Cables, electrical, aircraft use - Test methods. Part 505: Tensile test on conductors and strands | |
| Draft BS EN 3475-701 Aerospace series - Cables, electrical, aircraft use - Test methods. Part 701: Strippability and adherence of insulation to the conductor | |
| Draft BS EN 3475-804 Aerospace series - Cables, electrical, aircraft use - Test methods. Part 804: Velocity of propagation | |
| Draft BS EN 3475-812 Aerospace series - Cables, electrical, aircraft use - Test methods. Part 812: Return loss (VSWR) | |
| Draft BS EN 3545-001 Aerospace series - Connectors, electrical, rectangular, with sealed and non-sealed rear, plastic housing, locking device, operating temperatures \x9655 degrees C to 175 degrees C - Part... | |
| Draft BS EN 3613 Aerospace series - Bolts, normal hexagonal head, relieved shank, long thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated - Classification: 1 275... | |
| Draft BS EN 3636 Aerospace series - Screws, reduced pan head, offset cruciform recess, relieved shank, long thread, in heat resisting steel FEPA92HT (A286), silver plated - Classification: 900 MPa/650... | |
| Draft BS EN 3740 Aerospace series - Bolts, shouldered, thin hexagonal head, close tolerance shank, short thread, in titanium alloy, anodized, MoS2 coated - Classification: 1 100 MPa (at ambient... | |
| Draft BS EN 378-1 Refrigerating systems and heat pumps - Safety and environmental requirements. Part 1: Basic requirements, definitions, classification and selection criteria | |
| Draft BS EN 378-2 Refrigerating systems and heat pumps - Safety and environmental requirements. Part 2: Design, construction, testing, marking and documentation | |
| Draft BS EN 378-3 Refrigerating systems and heat pumps - Safety and environmental requirements. Part 3: Installation site and personal protection | |
| Draft BS EN 378-5 Refrigerating systems and heat pumps - Safety and environmental requirements. Part 5: Safety classification and information about refrigerants | |
| Draft BS EN 40000-1-1 Cybersecurity requirements for products with digital elements - Vocabulary | |
| Draft BS EN 40000-1-2 Cybersecurity requirements for products with digital elements. Part 1-2: Principles for cyber resilience | |
| Draft BS EN 4131 Aerospace series - Bolt, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1... | |
| Draft BS EN 4165-001 Aerospace series. Connectors, electrical, rectangular, modular -Operating temperature 175\xb0C continuous. Part 001: Technical specification | |
| Draft BS EN 4179 Aerospace series - Qualification and approval of personnel for nondestructive testing | |
| Draft BS EN 4216 Aerospace series. Steel GX5CrNiCuNb16-4 (1.4525). Homogenized, solution treated and precipitation hardened. Investment casting. De - 50 mm. Rm - 900 MPa | |
| Draft BS EN 4434 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) | |
| Draft BS EN 4500-001 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards. Part 001: General rules | |
| Draft BS EN 4500-002 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards. Part 002: Specific rules for aluminium, aluminium alloys and magnesium alloys | |
| Draft BS EN 4500-003 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards. Part 003: Specific rules for heat-resisting alloys | |
| Draft BS EN 4500-004 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards. Part 004: Specific rules for titanium and titanium alloys | |
| Draft BS EN 4500-005 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards. Part 005: Specific rules for steels | |
| Draft BS EN 4500-006 Aerospace series - Metallic materials - Rules for drafting and presentation of material standards. Part 006: Specific rules for filler metals and brazing | |
| Draft BS EN 4529-003 Aerospace series - Elements of electrical and optical connection - Sealing plugs. Part 003: Class T. Product standard | |
| Draft BS EN 46-1 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus). Part 1: Application by surface treatment (Laboratory method) | |
| Draft BS EN 46-2 Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus). Part 2: Ovicidal effect (Laboratory method) | |
| Draft BS EN 4650 Aerospace series - Wire and cable marking process, UV Laser | |
| Draft BS EN 47 Draft Wood preservatives - Determination of the toxic values against larvae of Hylotrupes bajulus (Linnaeus) - (Laboratory method) | |
| Draft BS EN 4880 Aerospace series - General technical specification for standard parts | |
| Draft BS EN 49-1 Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival Part 1: Application by surface treatment (Laboratory method)... | |
| Draft BS EN 49-2 Draft Wood preservatives - Determination of the protective effectiveness against Anobium punctatum (De Geer) by egg-laying and larval survival. Part 2: Application by impregnation (Laboratory method)... | |
| Draft BS EN 50065-1 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 526,5 kHz. Part 1: General requirements, frequency bands and electromagnetic disturbances | |
| Draft BS EN 50121-1: 2025 Railway applications - Electromagnetic compatibility. Part 1: General | |
| Draft BS EN 50121-2:2025 Railway applications - Electromagnetic compatibility. Part 2: Emission of the whole railway system to the outside world | |
| Draft BS EN 50121-3-1:2025 Railway applications - Electromagnetic compatibility. Part 3-1: Rolling stock - Train and complete vehicle | |
| Draft BS EN 50121-3-2 Railway applications - Electromagnetic compatibility. Part 3-2: Rolling stock - Apparatus | |
| Draft BS EN 50121-4:2025 Railway applications - Electromagnetic compatibility. Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Draft BS EN 50121-5:2025 Railway applications - Electromagnetic compatibility. Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Draft BS EN 50125 Railway applications. Environmental conditions for equipment | |
| Draft BS EN 50131-3 Alarm systems - Intrusion and hold-up systems. Part 3: Control and indicating equipment | |
| Draft BS EN 50159 Railway Applications - Communication, signalling and processing systems - Safety-related communication in transmission systems | |
| Draft BS EN 50206-2:2025 Railway applications. Rolling stock. Part 2: Pantographs for metros and light rail vehicles, characteristics and tests | |
| Draft BS EN 50270 Electromagnetic compatibility - Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen | |
| Draft BS EN 50562-1 Fixed installations for railway applications - Safety of electric traction power supply systems. Part 1: Generic approach for conventional applications, functions and properties | |
| Draft BS EN 50562-2 Fixed installations for railway applications - Safety of electric traction power supply systems. Part 2: Generic approach for non-conventional applications, functions and properties | |
| Draft BS EN 50625-1 Collection, logistics & treatment requirements for WEEE. Part 1: General treatment requirements | |
| Draft BS EN 50663 BS Generic standard for assessment of low power electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (10 MHz - 300 GHz) | |
| Draft BS EN 507 Roofing and cladding products from metal sheet - Specification for fully supported products of aluminium sheet. | |
| Draft BS EN 50743 Ecodesign for power electronics including approach for environmental product declarations and specifications for the material efficiency assessment | |
| Draft BS EN 508-2 Roofing and cladding products from metal sheet. Specification for self-supporting products of steel, aluminium or stainless steel sheet. Part 2: Aluminium | |
| Draft BS EN 513 Plastics - Poly(vinyl chloride) (PVC) based profiles. Determination of the resistance to artificial weathering | |
| Draft BS EN 568 Mountaineering equipment - Ice anchors - Safety requirements and test methods | |
| Draft BS EN 573-3 Aluminium and aluminium alloys - Chemical composition and form of wrought products. Part 3: Chemical composition and form of products | |
| Draft BS EN 593 Industrial valves - Metallic butterfly valves | |
| Draft BS EN 601 Aluminium and aluminium alloys - Castings - Chemical composition of castings for use in contact with foodstuff | |
| Draft BS EN 60127-6 ED 3.0/A1 Miniature fuses. Part 6: Fuse-holders for miniature fuse-links | |
| Draft BS EN 602 Aluminium and aluminium alloys - Wrought products. Chemical composition of semi-finished products used for the fabrication of articles for use in contact with foodstuff | |
| Draft BS EN 6049-007 Aerospace series -Electrical cables, installation. Protection sleeve in meta-aramid fibres. Part 007: Self-wrapping mechanical and electrical protective sleeve, flexible post installation operating temperature from -55 \xb0C... | |
| Draft BS EN 61058-1-1/A1 Switches for appliances Part 1-1: Requirements for mechanical switches | |
| Draft BS EN 688 Resilient floor coverings - Specification for corklinoleum | |
| Draft BS EN 732 Specifications for dedicated liquefied petroleum gas appliances - Absorption refrigerators | |
| Draft BS EN 81-28 Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods. Part 28: Two-way communication system | |
| Draft BS EN 878 Chemicals used for treatment of water intended for human consumption - Aluminium sulfate | |
| Draft BS EN 882 Chemicals used for treatment of water intended for human consumption -Sodium aluminate | |
| Draft BS EN 887 Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate | |
| Draft BS EN 888 Chemicals used for treatment of water intended for human consumption - Iron (III) chloride | |
| Draft BS EN 889 Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate | |
| Draft BS EN 890 Chemicals used for treatment of water intended for human consumption -Iron (III) sulfate solution | |
| Draft BS EN 891 Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate | |
| Draft BS EN 913 Gymnastic equipment - General safety requirements and test methods | |
| Draft BS EN 9247 Aerospace series -Programme management - Verification and validation of numerical models and simulations | |
| Draft BS EN 9300-500 Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as requirements, architecture, simulation, and analytical data. Part 500: Fundamentals... | |
| Draft BS EN IEC 60034-18-41 Rotating electrical machines Part 18-41: Partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters - Qualification and... | |
| Draft BS EN IEC 60073 Basic and safety principles for man-machine interface, marking and identification - Coding principles for indicators and actuators | |
| Draft BS EN IEC 60317-0-1/AMD2 Amendment 2 - Specifications for particular types of winding wires Part 0-1: General requirements - Enamelled round copper wire | |
| Draft BS EN IEC 60335-2-108 :2025/prAA:2025 Household and similar electrical appliances - Safety. Part 2-108: Particular requirements for electrolysers | |
| Draft BS EN IEC 60335-2-115 Household and similar electrical appliances - Safety Part 2-115: Particular requirements for skin beauty care appliances | |
| Draft BS EN IEC 60335-2-125 Household and similar electrical appliances - Safety Part 2-125: Particular requirements for breast pumps for expressing breast milk | |
| Draft BS EN IEC 60447 Basic and safety principles for man-machine interface, marking and identification - Actuating principles | |
| Draft BS EN IEC 60761-1 Radiation protection instrumentation - Equipment for continuous monitoring of radioactivity in gaseous effluents Part 1: General requirements | |
| Draft BS EN IEC 60851-5 Winding wires - Test methods Part 5: Electrical properties | |
| Draft BS EN IEC 61000-4-29 Electromagnetic compatibility (EMC) Part 4-29: Testing and measurement techniques - Voltage dips; short interruptions and voltage variations on d.c. input power port immunity tests | |
| Draft BS EN IEC 61058-1-2/AMD1 Amendment 1 - Switches for appliances Part 1-2: Requirements for electronic switches | |
| Draft BS EN IEC 61535/AMD1 Amendment 1 - Installation couplers intended for permanent connection in fixed installations | |
| Draft BS EN IEC 61535/AMD1/FRAG1 Fragment 1 - Amendment 1 - Installation couplers intended for permanent connection in fixed installations | |
| Draft BS EN IEC 61535/AMD1/FRAG2 Fragment 2 - Amendment 1 - Installation couplers intended for permanent connection in fixed installations | |
| Draft BS EN IEC 61540 Portable residual current devices (PRCDs) without integral overcurrent protection for household and similar use | |
| Draft BS EN IEC 61754-4/AMD1 Amendment 1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 4: Type SC connector family | |
| Draft BS EN IEC 61754-6/AMD1 Amendment 1 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces Part 6: Type MU connector family | |
| Draft BS EN ISO 11140-4 Sterilization of health care products - Chemical indicators. Part 4: Type 2 indicator systems as an alternative to the Bowie and Dick-type test for the... | |
| Draft BS EN ISO 11378-2 Textile floor coverings - Laboratory soiling. Part 2: Drum test | |
| Draft BS EN ISO 11997-2 Paints and varnishes - Determination of resistance to cyclic corrosion conditions. Part 2: Wet (salt fog)/dry/humidity/UV light | |
| Draft BS EN ISO 15621 Absorbent incontinence products for urine and/or faeces - General guidelines on evaluation | |
| Draft BS EN ISO 16923 Natural gas fuelling stations - CNG stations for fuelling vehicles | |
| Draft BS EN ISO 18166 Numerical welding simulation - Execution and documentation | |
| Draft BS EN ISO 19634 Fine ceramics (advanced ceramics, advanced technical ceramics) -Ceramic composites - Notations and symbols | |
| Draft BS EN ISO 80601-2-70 Medical electrical equipment. Part 2-70: Particular requirements for basic safety and essential performance of sleep apnoea breathing therapy equipment. | |
| Draft BS EN ISO/IEC 19896-3 Information security, cybersecurity and privacy protection - Requirements for the competence of IT security conformance assessment body personnel. Part 3: Knowledge and skills requirements for... | |
| Draft BS IEC 62523 Radiation protection instrumentation - Cargo/vehicle radiographic inspection system | |
| Draft BS ISO 11421 Optics and photonics. Uncertainty of optical transfer function (OTF) measurement | |
| Draft BS ISO 19723-1 Road vehicles - Liquefied natural gas (LNG) fuel systems. Part 1: Safety requirements | |
| Draft BS ISO 19723-2 Road vehicles - Liquefied natural gas (LNG) fuel systems. Part 2: Test methods | |
| Draft BS ISO 22514-7 Statistical methods in process management \x97 Capability and performance. Part 7: Capability of measurement processes | |
| Draft BS ISO 7240-1 Fire detection and alarm systems. Part 1: General and definitions | |
| Earthquake-Actuated Automatic Gas Shutoff Devices | |
| Essential oil of rose, Chinese Kushui type (Rosa sertata \xd7 Rosa rugosa) | |
| Flood Abatement Equipment | |
| Forets \xe0 centrer pour centres \xe0 profil curviligne - Type R | |
| Forets \xe0 centrer pour centres avec chanfrein de protection - Type B | |
| Furfural for Industrial Use - Determination of Total Carbonyl Compounds - Volumetric Method | |
| Generic Requirements for Implementation of Product Manufacturing Description Data and Transfer Methodology | |
| Generic Requirements for Implementation of Product Manufacturing Description Data and Transfer MXL Schema Methodology | |
| Geometrical product specifications (GPS) \x97 Characteristics and conditions \x97 Definitions | |
| Geometrical product specifications (GPS) \x97 Surface texture: Areal \x97 Part 601: Nominal characteristics of contact (stylus) instruments | |
| Geometrical product specifications (GPS) \x97 Surface texture: Areal \x97 Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments | |
| Geometrical product specifications (GPS) \x97 Surface texture: Areal \x97 Part 700: Calibration, adjustment and verification of areal topography measuring instruments | |
| Geometrical product specifications (GPS) \x97 Surface texture: Areal \x97 Part 72: XML file format x3p AMENDMENT 1 | |
| Hardware for furniture \x97 Strength and durability of hinges and their components \x97 Stays and hinges pivoting on a horizontal axis | |
| Hexylene Glycol for Industrial Use - List of Methods of Test | |
| Informatique de sant\xe9 - Pseudonymisation | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 General requirements for using public networks | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 Mobile wireless broadband using HC-SDMA | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 Mobile wireless broadband using IEEE 802.16 | |
| Internal Combustion Engines - Spark Plug Ignition - Terminology | |
| Keyboard for International Information Processing Interchange Using the ISO 7-Bit Coded Character Set- Alphanumeric Area | |
| Leather \x97 Tests for colour fastness \x97 Colour fastness to sea water | |
| LED Reference Spectrum for Photometer Calibration | |
| Lignes directrices relatives \xe0 l'incertitude en hydrom\xe9trie | |
| Limits and Fits - Series of Angles and Slopes on Wedges and Prisms | |
| Liquid flow measurement in open channels - Ro ta ting elemen t curren t-me ters | |
| Lubrication of Industrial Open Gearing | |
| Optics and photonics - Electronic exchange of optical data - Part 2: Mapping to the classes and properties defined in ISO 23584 | |
| Optics and photonics \x97 Electronic exchange of optical data \x97 Part 1: NODIF information model | |
| Perception du t\xe9l\xe9p\xe9age - D\xe9finition d'interface pour compte de bord utilisant une carte \xe0 circuit int\xe9gr\xe9 (ICC) | |
| Performance Under Pressure | |
| Petits navires - Syst\xe8mes \xe9lectriques/\xe9l ectroniques pour le contr\xf4le de la direction, de l\x92inverseur et des gaz AMENDEMENT 1 | |
| Petits navires - Syst\xe8mes \xe9lectriques/\xe9l ectroniques pour le contr\xf4le de la direction, de l\x92inverseur et des gaz | |
| Plastics - Production quality control - Statistical method for using single measurements | |
| Plastiques - Mat\xe9riaux pour moulage et extrusion \xe0 base de polym\xe8res sulfone - Partie 1: Syst\xe8me de d\xe9signation et base de sp\xe9cifications | |
| Plastiques - Mat\xe9riaux pour moulage et extrusion \xe0 base de polym\xe8res sulfone - Partie 2: Pr\xe9paration des \xe9prouvettes et d\xe9termination des propri\xe9t\xe9s | |
| Qualit\xe9 du sol - Description du sol sur le terrain | |
| Rolling Bearings, Linear Motion Recirculating Ball, Sleeve Type Inch Series | |
| Sectional Requirements for Implementation of Administrative Methods for Manufacturing Data Description [ADMIN] | |
| Sectional Requirements for Implementation of Assembled Board Product Manufacturing Data Description [BDASM] | |
| Sectional Requirements for Implementation of Assembly In-Circuit Testing Data Description [ASEMT] | |
| Sectional Requirements for Implementation of Drawing Methods for Manufacturing Data Description [DRAWG] | |
| Sectional Requirements for Implementation of Part List Product Data Description [PTLST] | |
| Sectional Requirements for Implementation of Printed Board Fabrication Data Description [BDFAB] | |
| SMEMA Standard Recipe File Format Specification | |
| Soudage par friction-malaxage - Aluminium - Partie 2: Conception des assemblages soud\xe9s | |
| Soudage par friction-malaxage - Aluminium - Partie 3: Qualification des op\xe9rateurs soudeurs | |
| Soudage par friction-malaxage - Aluminium - Partie 5: Exigences de qualit\xe9 et de contr\xf4le | |
| Soudage par friction-malaxage - Aluminium Partie 4: Descriptif et qualification des modes op\xe9ratoires de soudage | |
| Soudage par friction-malaxage \x97 Aluminium \x97 Partie 1: Vocabulaire | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 1: Indication des \xe9tats de surface | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 2: Termes, d\xe9finitions et param\xe8tres d'\xe9tats de surface | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 3: Op\xe9rateurs de sp\xe9cification | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 603: Caract\xe9ristiques nominales des instruments sans contact (microscopes interf\xe9rom\xe9tri ques \xe0 glissement de franges) | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 604: Caract\xe9ristiques nominales des instruments sans contact (\xe0 interf\xe9rom\xe9tri e par balayage \xe0 coh\xe9rence) | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 605: Caract\xe9ristiques nominales des instruments sans contact (capteur autofocus \xe0 point) | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 606: Caract\xe9ristiques nominales des instruments sans contact (\xe0 variation de focale) | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 607: Caract\xe9ristiques nominales des instruments sans contact (microscopie confocale) | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 6: Classification des m\xe9thodes de mesurage de l'\xe9tat de surface | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 701: \xc9talonnage et \xe9talons de mesure pour les instruments \xe0 contact (\xe0 palpeur) | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: surfacique - Partie 70: Mesures mat\xe9rialis\xe9es | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9tat de surface: Surfacique - Partie 71: \xc9talons logiciels | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - Coins - Partie 1: S\xe9ries d\x92angles et d\x92inclinaisons | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - Coins - Partie 2: Cotation et tol\xe9rancement | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) \x97 \xc9tat de surface: Surfacique \x97 Partie 600: Caract\xe9ristiques m\xe9trologiques pour les m\xe9thodes de mesure par topographie surfacique | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) \x97 \xc9tat de surface: Surfacique \x97 Partie 72: Format de fichier XML x3p AMENDEMENT 1 | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) \x97 \xc9tat de surface: Surfacique \x97 Partie 72: Format de fichier XML x3p | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) \x97 \xc9tat de surface: surfacique \x97 Partie 73: Termes et d\xe9finitions pour les d\xe9fauts de surface sur les mesures mat\xe9rialis\xe9es | |
| St\xe9rilisation des dispositifs m\xe9dicaux - Formald\xe9hyde et vapeur \xe0 faible temp\xe9rature - Exigences pour le d\xe9veloppement, la validation et le contr\xf4le de routine d'un proc\xe9d\xe9 de st\xe9rilisation pour dispositifs m\xe9dicaux... | |
| Standard Atmosphere (Identical with the ICAO and WMO Standard Atmospheres from - 2 to 32 km) | |
| Standard atmosphere ADDENDUM 1 : Hypsometrical tables | |
| Standard Atmosphere ADDENDUM 2: Extension to - 5000 m and Standard atmosphere as a function of altitude in feet | |
| Standard Definitions of PARAMETRIC DEVICE TERMS | |
| STANDARD METHOD OF TEST FOR CRITICAL RADIANT FLUX OF FLOOR COVERING SYSTEMS USING A RADIANT HEAT ENERGY SOURCE | |
| Steel Wire Ropes - Vocabulary | |
| Sterilization of health care products \x97 Low temperature steam and formaldehyde \x97 Requirements for development, validation and routine control of a sterilization process for medical devices AMENDMENT 1 | |
| Systems and software engineering \x97 Software product Quality Requirements and Evaluation (SQuaRE) \x97 Common Industry Format (CIF) for Usability: User requirements specification | |
| Systems and software engineering \x97 Systems and software Quality Requirements and Evaluation (SQuaRE) \x97 Common Industry Format (CIF) for reporting usability evaluations | |
| Test to Determine the Temperature Rise as a Function of Current in Printed Conductors | |
| Textile Conveyor Belts - Adhesive Strength between Constitutive Elements - Part 1: Methods of Test | |
| Textile Machinery and Accessories - Warping Machinery - Preparation of Warp for Weaving - Vocabulary | |
| Tracteurs et mat\xe9riels agricoles et forestiers - Parties des syst\xe8mes de commande relatives \xe0 la s\xe9curit\xe9 - Partie 3: D\xe9veloppement en s\xe9rie, mat\xe9riels et logiciels | |
| Tracteurs et mat\xe9riels agricoles et forestiers - Parties des syst\xe8mes de commande relatives \xe0 la s\xe9curit\xe9 - Partie 4: Proc\xe9d\xe9s de production, de fonctionnement, de modification et d'entretien | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development | |
| Tractors and machinery for agriculture and forestry \x97 Safety-related parts of control systems \x97 Part 2: Concept phase | |
| Tractors and machinery for agriculture and forestry \x97 Safetyrelated parts of control systems \x97 Part 1: General principles for design and development AMENDMENT 1 | |
| Tractors and machinery for agriculture and forestry \x97 Safetyrelated parts of control systems \x97 Part 3: Series development, hardware and software AMENDMENT 1 | |
| Tractors and machinery for agriculture and forestry \x97 Safetyrelated parts of control systems \x97 Part 4: Production, operation, modification and supporting processes AMENDMENT 1 | |
| Tritolyl Phosphate for Industrial Use - Determination of Acidity to Phenol Red - Volumetric Method | |
| Tritolyl Phosphate for Industrial Use - Determination of Apparent Free Phenols Content - Volumetric Method | |
| Tritolyl Phosphate for Industrial Use - List of Methods of Test | |
| Tubes et raccords en mati\xe8res thermoplastiques - Temp\xe9rature de ramollissement Vicat - Partie 1: M\xe9thode g\xe9n\xe9rale d\x92essai | |
| Tubes et raccords en mati\xe8res thermoplastiques - Temp\xe9rature de ramollissement Vicat - Partie 2: Conditions particuli\xe8res d\x92essai pour tubes et raccords en poly(chlorure de vinyle) non plastifi\xe9 (PVC-U) ou en... | |
| Tubes et raccords en mati\xe8res thermoplastiques - Temp\xe9rature de ramollissement Vicat - Partie 3: Conditions particuli\xe8res d\x92essai pour tubes et raccords en acrylonitrile/butadi \xe8ne/styr\xe8ne (ABS) et en acrylonitrile/styr\x e8ne/ester acrylique... | |
| Tuyaux, raccords et accessoires en fonte ductile et leurs assemblages pour l'eau Rectificatif technique 1 | |
| UL Standard for Safety Aboveground Reinforced Thermosetting Resin Conduit (RTRC) and Fittings | |
| UL Standard for Safety Air Dispersion Systems | |
| UL Standard for Safety Compressed Gas Regulator Accessories | |
| UL STANDARD FOR SAFETY In-building 2-Way Emergency Radio Communication Enhancement Systems | |
| UL Standard for Safety Solid Fuel-Fired Hydronic Heating Appliances, Water Heaters, And Boilers | |
| UL Standard for Safety Supplemental Requirements for Extra Heavy Wall Reinforced Thermosetting Resin Conduit (RTRC) and Fittings | |
| UL STANDARD FOR SAFETY Two-Way Emergency Communications Systems for Rescue Assistance | |
| Unplasticized Polyvinyl Chloride (PVC) Pipes - Water Absorption - Determination and Specification | |
| Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes and Fittings, Metric Series - Dimensions of Flanges | |
| Water quality - Determination of perfluorooctanesulfo nate (PFOS) and perfluorooctanoate (PFOA) - Method for unfiltered samples using solid phase extraction and liquid chromatography/mass spectrometry |
| << Prev | Next >> |