Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
43
44
45
46
47
48
49
50
51
52
53
54
55
60
70
80
90
100
110
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| (WITHDRAWN) Four-Frequency Diplex Systems - Section 3Ca - Radiotelegraph Circuits | |
| \xc9l\xe9ments standard pour la construction des machines-outils - Consoles | |
| \xc9l\xe9ments standard pour la construction des machines-outils - Entra\xeenement par tenon et brides de fixation de t\xeates multibroches | |
| \xc9l\xe9ments standard pour la construction des machines-outils - Montants \xe0 glissi\xe8re incorpor\xe9e AMENDEMENT 1 | |
| \xc9l\xe9ments standard pour la construction des machines-outils - Montants \xe0 glissi\xe8re incorpor\xe9e | |
| \xc9l\xe9ments standard pour la construction des machines-outils - Unit\xe9s de broche d\x92usinage | |
| \xc9pices - D\xe9termination du degr\xe9 de finesse des moutures - M\xe9thode par tamisage manuel (M\xe9thode de r\xe9f\xe9rence) | |
| A\xe9ronefs - Interrupteurs \xe0 levier \xe0 commande manuelle (classe 3) - Caract\xe9ristiques | |
| Abrogazione Norme CEI CT 34 | |
| AC Corrosion State-of-the-Art: Corrosion Rate, Mechanism, and Mitigation Requirements | |
| Acoustique - Mesurage de l'absorption acoustique en salle r\xe9verb\xe9rante | |
| Agrumes - Guide pour l\x92entreposage | |
| Al\xe9soirs \xe0 machine pour trous de goupilles coniques, \xe0 queue c\xf4ne Morse | |
| Al\xe9soirs \xe0 machine pour trous de goupilles coniques, \xe0 queue cylindrique | |
| Al\xe9soirs \xe0 main pour trous de goupilles coniques | |
| Aluminium et alliages d'aluminium \x97 Pi\xe8ces moul\xe9es \x97 Composition chimique et caract\xe9ristiques m\xe9caniques | |
| Aluminium in fuel oils by ashing and atomic absorption spectroscopy | |
| Amidons et f\xe9cules - D\xe9termination des cendres | |
| Analyse sensorielle - Appareillage - Verre \xe0 d\xe9gustation pour l\x92analyse sensorielle des vins | |
| Analysis and Design of Reinforced and Prestressed-Concrete Guideway Structures | |
| Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Part 1: Method Using Diethyl Ether Extraction (Reference Method) | |
| Animal and Vegetable Fats and Oils - Determination of Unsaponifiable Matter - Part 2: Rapid Method Using Hexane Extraction | |
| Art dentaire - Instruments pour canaux radiculaires - Partie 1: Exigences g\xe9n\xe9rales et m\xe9thodes d'essai | |
| Art dentaire - Instruments pour canaux radiculaires - Partie 4: Instruments auxiliaires | |
| Assemblages entre raccords et tubes sous pression en poly\xe9thyl\xe8ne (PE) - Essai d\x92\xe9tanch\xe9it \xe9 \xe0 la pression int\xe9rieure | |
| Atomizing Oil Burners of the Monobloc Type - Safety Times and Safety, Control and Monitoring Devices | |
| Blending Equipment | |
| Borosilicate Glass 3.3 - Properties Second Edition | |
| Caract\xe9ristiques m\xe9caniques des \xe9l\xe9ments de fixation en acier inoxydable r\xe9sistant \xe0 la corrosion - Partie 1: Vis et goujons | |
| Caract\xe9ristiques m\xe9caniques des \xe9l\xe9ments de fixation en acier inoxydable r\xe9sistant \xe0 la corrosion - Partie 2: \xc9crous | |
| Caract\xe9ristiques m\xe9caniques des \xe9l\xe9ments de fixation en acier inoxydable r\xe9sistant \xe0 la corrosion - Partie 3: Vis sans t\xeate et \xe9l\xe9ments de fixation similaires non soumis \xe0 des contraintes de... | |
| Caract\xe9ristiques m\xe9caniques des \xe9l\xe9ments de fixation en acier inoxydable r\xe9sistant \xe0 la corrosion - Partie 4: Vis \xe0 t\xf4le | |
| Carburants aviation - Estimation de l\x91\xe9nergie sp\xe9cifique inf\xe9rieure RECTIFICATIF TECHNIQUE 1 | |
| Carburants aviation - Estimation de l\x91\xe9nergie sp\xe9cifique inf\xe9rieure | |
| Catene luminose decorative funzionanti con lampade pisello | |
| Centrifugal, Mixed Flow and Axial Pumps - Code for Acceptance Tests - Class B | |
| Cha\xeenes de transmission \xe0 maillons coud\xe9s de haute r\xe9sistance | |
| Characteristics of indoor and outdoor post insulators for systems with nominal voltages greater than 1000 V | |
| Chlorinated Polyvinyl Chloride (CPVC) Pipes - Tolerances on Outside Diameters and Wall Thicknesses | |
| Cigarettes - D\xe9termination de la perte de tabac par les extr\xe9mit\xe9s - Partie 1: M\xe9thode utilisant une cage rotative cylindrique \xe0 barreaux | |
| Cigarettes - D\xe9termination de la perte de tabac par les extr\xe9mit\xe9s - Partie 2: M\xe9thode utilisant une bo\xeete rotative cubique (sism\xe9latophore) | |
| Cigarettes - Determination of Loss of Tobacco from the Ends | |
| Cin\xe9matographie - Axes pour bobines de cam\xe9ra et de projecteur 16 mm - Dimensions | |
| Cin\xe9matographie - Axes pour cam\xe9ras et projecteurs 8 mm type R - Dimensions | |
| Cin\xe9matographie - Bobines de projection pour film cin\xe9matographique 8 mm, type S, de diam\xe8tre 75 \xe0 312 mm - Dimensions et sp\xe9cifications | |
| Cin\xe9matographie - Chargeurs, mod\xe8le II, pour cam\xe9ras 8 mm type S - Ajustage du chargeur et entra\xeenement du noyau r\xe9cepteur - Dimensions et sp\xe9cifications | |
| Cin\xe9matographie - Chargeurs, mod\xe8le II, pour cam\xe9ras 8 mm type S - Encoches et bossage pour la sensibilit\xe9 du film, cavit\xe9 et bossage pour l\x92identification du film et pour le... | |
| Cin\xe9matographie - Raccords par collure ou soudure sur film cin\xe9matographique 8 mm type S destin\xe9 \xe0 la projection - Dimensions | |
| Cleaning Equipment for Air or Other Gases - Vocabulary | |
| Code for Concrete Reactor Vessels and Containments | |
| CODE REQUIREMENTS FOR ENVIRONMENTAL ENGINEERING CONCRETE STRUCTURES (ACI 350-01) AND COMMENTARY (ACI 350R-01) | |
| Code Requirements for Environmental Engineering Concrete Structures (ACI 350-20) and Commentary (ACI 350R-20) | |
| Code Requirements for Environmental Engineering Concrete Structures (ACI 350M-01) and Commentary (ACI 350RM-01) | |
| Code Requirements for Environmental Engineering Concrete Structures and Commentary | |
| Code Requirements for Nuclear Safety Related Concrete Structures / Commentary on Code Requirements for Nuclear Safety Related Concrete Structures (ACI 349R-01) | |
| Code Requirements for Nuclear Safety-Related Concrete Structures (ACI 349M-06) and Commentary | |
| Coffee and Its Products - Vocabulary | |
| Cold-Reduced Carbon Steel Sheet of Commercial and Drawing Qualities Second Edition | |
| Commentary on Code Requirements for Nuclear Safety Related Concrete Structures | |
| Composite Concrete and Steel High-Pressure Vessels for General Industrial Use | |
| Concentr\xe9 de latex de caoutchouc naturel - D\xe9termination de la stabilit\xe9 m\xe9canique AMENDEMENT 1: Donn\xe9es de fid\xe9lit\xe9 | |
| Concrete Capacity Design (CCD) Method\x97Embedment Design Examples | |
| Concrete Removal in Repairs Involving Corroded Reinforcing Steel | |
| Concrete Structures for Containment of Hazardous Materials | |
| Continuous Hot-Dip Zinc-Coated Carbon Steel Sheet of Commercial, Lock-Forming and Drawing Qualities | |
| Copper and zinc sulfide concentrates \x97 Determination of thallium \x97 Acid digestion and inductively coupled plasma-mass spectrometry | |
| Cordages et articles de corderie - \xc9quivalence d'emploi pour l'amarrage des navires entre cordages en fibres naturelles et 000cordages en fibres chimiques | |
| Corps gras d'origines animale et v\xe9g\xe9tale - D\xe9termination de la teneur en mati\xe8res insaponifiables - M\xe9thode par extraction \xe0 l'oxyde di\xe9thylique | |
| Corrosion-Resistant Stainless Steel Fasteners - Specifications | |
| Corrosivity of Plastics (Connector/Socket Housing) | |
| Cracks in a Repair | |
| Cross-linked polyethylene (PEX) pipe and fittings for water-based ground-source (geothermal) heat pump systems | |
| Crude petroleum - Determination of water - Distillation method | |
| D\xe9signation des tailles de v\xeatements - D\xe9firiitions et proc\xe9d\xe9s de mesurage du corps | |
| D\xe9signation des tailles de v\xeatements - V\xeatements de dessus pour femmes et fi11es | |
| D\xe9signation des tailles de v\xeatements - V\xeatements de dessus pour femmes et filles RECTIFICATIF TECHNIQUE 1 | |
| D\xe9signation des tailles de v\xeatements - V\xeatements de dessus pour hommes et gar?ons RECTIFICATIF TECHNIQUE 1 | |
| D\xe9signation des tailles de v\xeatements - V\xeatements de dessus pour hommes et gar\xe7ons | |
| D\xe9signation des tailles de v\xeatements - V\xeatements pour enfants | |
| Dental Handpieces and Motors | |
| Design Considerations for Environmental Engineering Concrete Structures | |
| Design of Slabs on Grade | |
| Design of Slabs-on-Grade | |
| Designation and Safety Classification of Refrigerants | |
| Determining the Load Capacity of a Structure When As-Built Drawings are Unavailable | |
| Deuxi\xe8me \xe9dition | |
| Digital Intelligence (DQ)\x97Framework for Digital Literacy, Skills, and Readiness | |
| Dimensions of ball and socket couplings of string insulator units | |
| Dust-Ignitionproof Electrical Equipment General Requirements | |
| Earth-Moving Machinery - Dimensions of Fuel Filler Opening | |
| Earth-moving machinery - Roll-over protective structures - Laboratory tests and performance requirements - Part I : Crawler, wheel loaders and tractors, backhoe loaders, graders, tractor scrgpers, articulated steer dumpers | |
| Electrical Connector Test Procedures | |
| Electrical Connector/Socket Test Procedures Including Environmental Classifications | |
| Embedment Design Examples | |
| Engins de manutention continue - Classification des charges isol\xe9es | |
| Engins de terrassement - Structures de protection au retournement - Essais de laboratoire et exigences de performance | |
| Essais non destructifs - Examen par ressuage - Partie 1: Principes g\xe9n\xe9raux | |
| Essais non destructifs - Examen par ressuage - Partie 2: Essai des produits de ressuage | |
| Essais non destructifs - Examen par ressuage - Partie 3: Pi\xe8ces de r\xe9f\xe9rence - RECTIFICATIF TECHNIQUE 1 | |
| Essais non destructifs - Examen par ressuage - Partie 3: Pi\xe8ces de r\xe9f\xe9rence | |
| Essais non destructifs - Examen par ressuage - Partie 4: \xc9quipement | |
| Essais non destructifs - Examen par ressuage - Partie 5: Examen par ressuage \xe0 des temp\xe9ratures sup\xe9rieures \xe0 50 \xb0C | |
| Essais non destructifs - Examen par ressuage - Partie 6: Examen par ressuage \xe0 des temp\xe9ratures inf\xe9rieures \xe0 10 \xb0C | |
| Evaluating the Performance of Post-Installed Mechanical Anchors in Concrete (ACI 355.2-01) and Commentary (ACI 355.2R-01) | |
| Evaluation and Minimization of Bruising (Microcracking) in Concrete Repair | |
| Evaluation of Existing Nuclear Safety-Related Concrete Structures | |
| Explosionproof Electrical Equipment General Requirements | |
| Fasteners \x97 Mechanical properties of corrosion-resistant stainless steel fasteners \x97 Part 5: Special fasteners (also including fasteners from nickel alloys) for high temperature applications | |
| Fasteners \x97 Mechanical properties of corrosion-resistant stainless steel fasteners \x97 Part 7: Flat washers with specified grades and property classes | |
| Feuille-gabarit et grille d\x92espacements | |
| Fibre Building Boards - Determination of Surface Finish (Roughness) | |
| Filets incomplets pour.les \xe9l\xe9ments de fixation avec un filetage selon ISO 261 et ISO 262 | |
| Financial services \x97 Financial information eXchange session layer \x97 Part 1: FIX tagvalue encoding | |
| Financial services \x97 Financial information eXchange session layer \x97 Part 2: FIX session layer | |
| Financial services \x97 Financial information eXchange session layer \x97 Part 3: FIX session layer test cases | |
| Fitting for Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes with Elastic Sealing Ring Type Joints - Pressure Test for Leakproofness Under Conditions of External Hydraulic Pressure | |
| Fixations \x97 Caract\xe9ristiques m\xe9caniques des fixations en acier inoxydable r\xe9sistant \xe0 la corrosion \x97 Partie 6: R\xe8gles g\xe9n\xe9rales pour la s\xe9lection des aciers inoxydables et des alliages de nickel pour... | |
| Flash point (open) and fire point of petroleum products by the Pensky-Martens apparatus | |
| Flash point by Pensky-Martens closed tester | |
| Flow and Pressure Safety Switches | |
| Fluid power systems \x97 O-rings \x97 Part 1: Inside diameters, cross-sections, tolerances and designation codes AMENDMENT 1 | |
| Fluid power systems \x97 O-rings \x97 Part 4: Anti-extrusion rings (back-up rings) | |
| Fluorure de sodium principalement utilis\xe9 pour la production de l\x92aluminium - Dosage des chlorures - M\xe9thode turbidim\xe9triqu | |
| Fonctions de r\xe9gulation, de mesure et d\x92automatisme des processus industriels - Repr\xe9sentation symbolique - Partie 4: Symboles de base pour la repr\xe9sentation des fonctions calculateur | |
| Fonctions et instrumentation pour la mesure et la r\xe9gulation des processus industriels - Repr\xe9sentation symbolique - Partie 2: Extension des principes de base | |
| Fonctions et instrumentation pour la mesure et la r\xe9gulation des processus industriels - Repr\xe9sentation symbolique - Partie 3: Symboles d\xe9taill\xe9s pour les diagrammes d'interconnexion d'instruments | |
| Fonctions et instrumentation pour la mesure et la r\xe9gulation des processus industriels - Repr\xe9sentation symbolique - Partie I : Principes de base | |
| Foundations for Dynamic Equipment | |
| Foundations for Static Equipment | |
| Gas cylinders \x97 Seamless steel CO2 cylinders for fixed fire-fighting installations on ships \x97 AMENDMENT 1 | |
| General Principles for the Creation of Graphical Symbols - Part 1: Graphical Symbols for Use on Equipment | |
| General Principles for the Creation of Graphical Symbols - Part 2: Graphical Symbols for Use in Technical Product Documentation | |
| General Requirements for the Docking Port of Intelligent Washing Machines and Cleaning All-in-One Robots | |
| Gesti\xf3n del riesgo biol\xf3gico en laboratorios y otras organizaciones relacionadas MODIFICACI\xd3N 1: Acciones relativas al cambio clim\xe1tico | |
| Gesti\xf3n del riesgo biol\xf3gico en laboratorios y otras organizaciones relacionadas | |
| Glass Plant, Pipeline and Fittings - General Rules for Testing, Handling and Use | |
| Glass Plant, Pipeline and Fittings - Pipeline and Fittings of Nominal Bore 15 to 150 mm - Compatibility and Interchangeability; (Erratum-1979) | |
| Good Manufacturing Practices (GMP) for Pharmaceutical Excipients | |
| Greener Chemicals and Processes Information | |
| Grouting for Support of Equipment and Machinery | |
| Gu\xeda de Mejores Pr\xe1cticas para el Ingreso y Trabajo Seguros en Espacios Confinados | |
| Gu\xeda para cimbras y encofrados para concreto | |
| Guide for Cementitious Repair Material Data Sheet | |
| Guide for Concrete Highway Bridge Deck Construction | |
| Guide for Design and Construction of Waterfront and Coastal Concrete Marine Structures | |
| Guide for Design of Anchorage to Concrete: Examples Using ACI 318 Appendix D | |
| Guide for Energy-Saving Lightweight Transformation and Operating Maintenance of Electric Facilities in Existing Buildings in Industrial and Commercial Installations | |
| Guide for Evaluation of Concrete Structures Prior to Rehabilitation | |
| Guide for Shoring/Reshoring of Concrete Multisory Buildings | |
| Guide for Structural Maintenance of Parking Structures | |
| Guide for the Design and Construction of Fixed Offshore Concrete Structures | |
| Guide for the Design of Durable Parking Structures | |
| Guide for Widening Highway Bridges | |
| Guide to Formed Concrete Surfaces | |
| Guide to Formwork for Concrete | |
| Guide to Quality Control and Testing of High-Strength Concrete | |
| Guidelines for Quality Assurance of Installed Fine-Pore Aeration Equipment | |
| Hot-Rolled Carbon Steel Sheet of Commercial and Drawing Qualities Second Edition | |
| Houille - Essai au dilatom\xe8tre Audibert-Arnu | |
| How to Measure pH of a Concrete Surface prior to Installation of a Floor Covering | |
| Huile essentielle d'amyris (Amyris balsamifera L.) | |
| Huile essentielle de bergamote [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], type Italie RECTIFICATIF TECHNIQUE 1 | |
| Huile essentielle de bergamote [Citrus aurantium L. subsp. bergamia (Wight et Arnott) Engler], type Italie | |
| Huile essentielle de bois de santal (Santalum album L.) | |
| Huile essentielle de cananga [Cananga odorata (Lam.) Hook f. et Thomson, forma macrophylla] | |
| Huile essentielle de feuilles de cannelier, type Sri Lanka (Cinnamomum zeylanicum Blume) | |
| Huile essentielle de fruits de coriandre (Coriandrum sativum L.) | |
| Huile essentielle de fruits de persil (Petroselinum sativum Hoffm.) | |
| Huile essentielle de lavande (Lavandula angustifolia Mill.) RECTIFICATIF TECHNIQUE 1 | |
| Huile essentielle de lavande (Lavandula angustifolia Mill.) | |
| Huile essentielle de limette distill\xe9e, type Mexique [Citrus aurantifolia (Christm.) Swingle] | |
| Huile essentielle de mandarine, type Italie (Citrus reticulata Blanco) | |
| Huile essentielle de n\xe9roli bigaradier (Citrus aurantium L., syn. Citrus amara Link, syn. Citrus bigaradia Loisel, syn. Citrus vulgaris Risso) | |
| Huile essentielle de sauge d'Espagne (Salvia lavandulifolia Vahl) | |
| Huiles essentielles - Pr\xe9paration des \xe9chantillons pour essai | |
| Importance of Modulus of Elasticity in Surface Repair Materials | |
| In-Line Nondestructive Inspection of Pipelines | |
| Increasing Shear Capacity Within Existing Reinforced Concrete Structures | |
| Industries du p\xe9trole et du gaz naturel - Op\xe9rations en Arctique - Environnement de travail | |
| Industries du p\xe9trole et du gaz naturel - Op\xe9rations en Arctique - Surveillance de l'environnement | |
| Industries du p\xe9trole et du gaz naturel \x97 Op\xe9rations en Arctique \x97 Fuite, \xe9vacuation et sauvetage depuis les installations en mer | |
| INHALATION NEUROTOXICITY STUDY IN RATS WITH C9 AROMATIC HYDROCARBONS | |
| Inline Rotor-Stator Mixers | |
| Instruments pour canaux radiculaires utilis\xe9s en art dentaire - Partie 3: Condenseurs, axial et lat\xe9ral | |
| Insulators - Glossary of terms and definitions | |
| Interpr\xe9tation statistique des donn\xe9es - Efficacit\xe9 des tests portant sur des moyennes et des variantes | |
| Isolatori per tensioni superiori a 1.000 V a corrente continua - Raccomandazioni per le prove e dimensioni | |
| Lampade e relative apparecchiature | |
| Land Mobile Radios for use in Class I, Division 1 Hazardours (Classified) Locations | |
| Liquid Flow Measurement in Open Channels - Calibration of Rotating-Element Current-Meters in Straight Open Tanks | |
| Luminaires and components - Terminology | |
| Luminaires and components Terminology | |
| M\xe9decine bucco-dentaire - Instruments d\x92endodontie - Partie 2: \xc9largisseurs | |
| M\xe9decine bucco-dentaire - Instruments d\x92endodontie - Partie 5: Instruments de mise en forme et de nettoyage | |
| Managing Alkali-Aggregate Reaction Expansion in Mass Concrete | |
| Manom\xe8tres - \xc9talonnage par comparaison directe avec un manom\xe8tre de r\xe9f\xe9rence | |
| Mat\xe9riel de forage rotatif au diamant avec carottage - Syst\xe8me A - Partie 1 : Unit\xe9s m\xe9triques | |
| Mat\xe9riel de forage rotatif au diamant avec carottage - Syst\xe8me A - Partie 2: Unit\xe9s en inches | |
| Mat\xe9riel de forage rotatif au diamant avec carottage - Syst\xe8me B - Partie 1: Unit\xe9s m\xe9triques | |
| Mat\xe9riel de forage rotatif au diamant avec carottage - Syst\xe8me B - Partie 2: Unit\xe9s en inches | |
| Mat\xe9riel pour I\x92industrie textile - Lisses \xe0 deux fils soud\xe9s avec maillon ins\xe9r\xe9 pour tissage Jacquard | |
| Mat\xe9riel pour I\x92industrie textile - Lisses \xe0 deux fils soud\xe9s pour tissage avec cadres | |
| Mat\xe9riel pour l'industrie textile - Lisses en acier plat avec boucles d'extr\xe9mit\xe9s ferm\xe9es - Partie 1: Dimensions des lisses fabriqu\xe9es en fils d'acier lamin\xe9 | |
| Mat\xe9riel pour l'industrie textile - Lisses en acier plat avec boucles d'extr\xe9mit\xe9s ferm\xe9es - Partie 2: Dimensions des lisses fabriqu\xe9es en feuillards d'acier tremp\xe9 | |
| Materials Standards for Metal Additive Manufactured Parts | |
| Materials Standards for Metal Injection Molded Parts | |
| MATERIALS STANDARDS FOR P/F STEEL PARTS | |
| MATERIALS STANDARDS FOR PM SELF-LUBRICATING BEARINGS | |
| MATERIALS STANDARDS FOR PM STRUCTURAL PARTS | |
| Mati\xe8res alv\xe9olaires polym\xe8res souples - M\xe9thode de laboratoire pour la d\xe9termination des caract\xe9ristiques de combustion de petites \xe9prouvettes soumises, en position horizontale, \xe0 une petite flamme AMENDEMENT 1 | |
| Mati\xe8res alv\xe9olaires polym\xe8res souples - M\xe9thode de laboratoire pour la d\xe9termination des caract\xe9ristiques de combustion de petites \xe9prouvettes soumises, en position horizontale, \xe0 une petite flamme | |
| Measurement of noise emitted by accelerating road vehicles \x97 Engineering method \x97 Part 1: M and N categories TECHNICAL CORRIGENDUM 1 | |
| Measurement of noise emitted by accelerating road vehicles \x97 Engineering method \x97 Part 2: L category | |
| Meat and Meat Products - Detection of Salmonellae (Reference Method) | |
| Mesurage du bruit \xe9mis par les v\xe9hicules routiers en acc\xe9l\xe9ration - M\xe9thode d\x92expertise - Partie 1: Cat\xe9gories M et N | |
| Mesurage du bruit \xe9mis par les v\xe9hicules routiers en acc\xe9l\xe9ration - M\xe9thode d\x92expertise - Partie 3: Essais \xe0 l\x92int\xe9rieur de cat\xe9gories M et N | |
| Mesure de d\xe9bit des liquides dans les canaux d\xe9couverts - Mat\xe9riel de sondage et de suspension pour le mesurage direct de la profondeur | |
| Methods of test for petroleum and its products - Part 356: Crude petroleum - Determination of water - Potentiometric Karl Fischer titration method | |
| Methods of test for petroleum and its products \x97 BS 2000-36: Determination of flash and fire points \x97 Cleveland open cup method | |
| Methods of test for Petroleum and its products Part 346. Determination of polycyclic aromatics in unused lubricating base oils and asphaltene free petroleum fractions - Dimethyl sulphoxide extraction refractive index... | |
| Methods of test for Petroleum and its products Part 35. Determination of open flash and fire point - Pensky-Martens method | |
| Milk Fat - Detection of Vegetable Fat by Gas-Liquid Chromatography of Sterols (Reference Method) | |
| Milk Fat - Detection of Vegetable Fat by the Phytosteryl Acetate Test First Edition | |
| Near Field Communication Interface and Protocol -2 (NFCIP-2) | |
| NFCIP-1 - Protocol Test Methods | |
| Non-Destructive Testing - Liquid Penetrant Inspection - Means of Verification | |
| NUCLEAR POWER PLANT SIMULATORS FOR USE IN OPERATOR TRAINING | |
| Numerical Control of Machines - NC Processor Output - Logical Structure (and Major Words) | |
| One Hundred Millivolt (mV) Cathodic Polarization Criterion | |
| Onsite Residential and Commercial Graywater Treatment Systems for Subsurface Discharge | |
| Onsite Residential and Commercial Water Reuse Treatment Systems | |
| Passenger Cars - Windscreen Defrosting Systems - Test Method | |
| Passenger Cars - Windscreen Demisting Systems - Test Method | |
| Petroleum and natural gas industries - Arctic operations - Ice management | |
| Petroleum and natural gas industries - Arctic operations - Metocean, ice, and seabed data | |
| Petroleum products Estimation of net specific energy of aviation turbine fuels using hydrogen content data | |
| Photographie - Produits chimiques de traitement - Sp\xe9cifications relatives \xe0 l'hydroxyde de potassium | |
| Photographie - Produits chimiques de traitement - Sp\xe9cifications relatives \xe0 l\x92acide borique granulaire | |
| Photography - Processing Chemicals - Specifications for Ammonium Thiocyanate | |
| Photography - Processing Chemicals - Specifications for Ammonium Thiosulfate Solution | |
| Photography - Processing Chemicals - Specifications for Anhydrous Potassium Carbonate | |
| Photography - Processing Chemicals - Specifications for Anhydrous Sodium Metabisulfite | |
| Photography - Processing Chemicals - Specifications for Benzotriazole | |
| Photography - Processing Chemicals - Specifications for Potassium Ferricyanide Second Edition | |
| Photography - Processing Chemicals - Specifications for Potassium Metabisulfite Second Edition | |
| Photography - Processing Chemicals - Specifications for Potassium Thiocyanate | |
| Photography - Processing Chemicals - Specifications for Sodium Hydroxide | |
| Photography - Processing Chemicals - Specifications for Sodium Tetraborate Decahydrate | |
| Physical Properties and Characteristics Affecting the Sensitivity to Cracking of Cementitious Repair Materials | |
| Pigments \xe0 base de poussi\xe8re de zinc pour peintures - Sp\xe9cifications et m\xe9thodes d\x92essai | |
| Piments enrag\xe9s (dits \xabde Cayenne\xbb) - D\xe9termination de l\x92indice Scoville | |
| Plain Bearing - Wrapped Bushes - Dimensions, Tolerances and Methods of Checking First Edition | |
| Plain Bearings - Thin- Walled Half Bearings - Dimensions, Tolerances and Methods of Checking First Edition | |
| Plain bearings - Thin-walled half bearings with or without flange - Part 1: Tolerances, design features and methods of test | |
| Plain bearings - Thin-walled half bearings with or without flange - Part 3: Measurement of peripheral length | |
| Plain Bearings - Wrapped Bushes - Part 1: Dimensions | |
| Plain Bearings - Wrapped Bushes - Part 2: Test Data for Outside and Inside Diameter | |
| Plain Bearings - Wrapped Bushes - Part 3: Lubrication Holes, Lubrication Grooves and Lubrication Indentations | |
| Plain Bearings - Wrapped Bushes - Part 4: Materials | |
| Plain bearings - Wrapped bushes - Part 5: Checking the outside diameter | |
| Plain bearings \x97 Thin-walled half bearings with or without flange \x97 Part 1: Tolerances, design features and methods of test AMENDMENT 1 | |
| Plain bearings \x97 Thin-walled half bearings with or without flange \x97 Part 2: Measurement of wall thickness and flange thickness | |
| Plain bearings \x97 Wrapped bushes \x97 Part 6: Checking the inside diameter | |
| Plain bearings \x97 Wrapped bushes \x97 Part 7: Measurement of wall thickness of thin-walled bushes | |
| Plastics - Aqueous Dispersions of Homopolymers and Copolymers of Vinyl Acetate - Determination of Bromine Number | |
| Plastiques - D\xe9termination du taux de cendres - Partie 3: Ac\xe9tate de cellulose non plastifi\xe9 | |
| Plastiques - D\xe9termination du taux de cendres - Partie 4: Polyamides | |
| Plastiques - D\xe9termination du taux de cendres - Partie 5: Poly(chlorure de vinyle) | |
| Plastiques - R\xe9sines d'\xe9poxydes et de polyesters non satur\xe9s - D\xe9termination du retrait global en volume RECTIFICATIF TECHNIQUE 1Plastiques - R\xe9sines d'\xe9poxydes et de polyesters non satur\xe9s - D\xe9termination du... | |
| Plastiques - R\xe9sines d\x92\xe9poxydes et de polyesters non satur\xe9s - D\xe9termination du retrait global en volume | |
| Plastiques renforc\xe9s verre textile - D\xe9termination des propri\xe9t\xe9s m\xe9caniques sur joncs de stratifils - Partie 1: Notions g\xe9n\xe9rales et pr\xe9paration des joncs | |
| Plastiques renforc\xe9s verre textile - D\xe9termination des propri\xe9t\xe9s m\xe9caniques sur joncs de stratifils - Partie 2: D\xe9termination de la r\xe9sistance en flexion | |
| Plastiques renforc\xe9s verre textile - D\xe9termination des propri\xe9t\xe9s m\xe9caniques sur joncs de stratifils - Partie 3: D\xe9termination de la r\xe9sistance en compression | |
| Plastiques renforc\xe9s verre textile - D\xe9termination des propri\xe9t\xe9s m\xe9caniques sur joncs de stratifils - Partie 4: D\xe9termination de la r\xe9sistance en cisaillement interlaminaire apparent | |
| Polyethylene (PE) Pipes - Tolerances on Outside Diameters and Wall Thicknesses | |
| Polyethylene of Raised Temperature (PE-RT) Tubing and Fittings for Water-Based Ground-Source (Geothermal) Heat Pump Systems | |
| Polyethylene Pipe and Fittings for Water-Based Ground-Source "Geothermal" Heat Pump Systems | |
| Polypropylene (PP) Pipes - Maximum Permissible Longitudinal Reversion | |
| Polypropylene (PP) Pipes - Tolerances on Outside Diameters and Wall Thicknesses | |
| Polypropylene (PP) Pipes and Fittings - Density - Determination and Specification | |
| Polypropylene Pipe and Fittings for Water-Based Ground-Source "Geothermal" Heat Pump Systems | |
| Prequalified Connections for Special and Intermediate Steel Moment Frames for Seismic Applications | |
| Produits consommables pour le soudage - \xc9lectrodes enrob\xe9es pour le soudage manuel \xe0 l'arc des aciers inoxydables et r\xe9sistant aux temp\xe9ratures \xe9lev\xe9es - Classification AMENDEMENT 1 | |
| Produits consommables pour le soudage - \xc9lectrodes enrob\xe9es pour le soudage manuel \xe0 l'arc des aciers inoxydables et r\xe9sistant aux temp\xe9ratures \xe9lev\xe9es - Classification RECTIFICATIF TECHNIQUE 1 | |
| Produits consommables pour le soudage - \xc9lectrodes enrob\xe9es pour le soudage manuel \xe0 l'arc des aciers inoxydables et r\xe9sistant aux temp\xe9ratures \xe9lev\xe9es - Classification | |
| Produits consommables pour le soudage - \xc9lectrodes enrob\xe9es pour le soudage manuel \xe0 l'arc des aciers r\xe9sistant au fluage - Classification | |
| Produits d\xe9riv\xe9s des l\xe9gumes - D\xe9termination de la teneur en chlorures | |
| Purged and Pressurized Electrical Equipment for Hazardous (Classified) Locations | |
| Pyknometers First Edition | |
| Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4-20) and Commentary | |
| Qualification of Post-Installed Mechanical Anchors in Concrete and Commentary | |
| Raccords \xe0 bagues d\x92\xe9tanch\xe9it \xe9 \xe9lastiques pour canalisations avec pression en polychlorure de vinyle (PVC) non plastifi\xe9 - Essai d\x92\xe9tanch\xe9it \xe9 | |
| Recomendaciones para el Dise\xf1o de Conexiones Viga-Columna en Estructuras Monol\xedticas de Concreto Reforzado | |
| Recommendations for Cast-In-Place Nonreinforced Concrete Pipe | |
| Recommendations for Design of Beam-Column Joints in Monolithic Reinforced Concrete Structures | |
| Recommendations for Design of Slab-Column Connections in Monolithic Reinforced Concrete Structures | |
| Rehabilitation of Structure with Reinforcement Section Loss | |
| Reinforced Concrete Design for Thermal Effects on Nuclear Power Plant Structures | |
| Repair of Leaking Cracks in Walls of Liquid Containment Structures | |
| Repair Service for Communication Equipment Used in Hazardous (Classified) Locations | |
| Repair Service for Process Control Equipment Used in Hazardous (Classified) Locations | |
| Repairs for Reinforcement with Shallow Cover | |
| Rev\xeatements m\xe9talliques - Mesurage de l'\xe9paisseur du rev\xeatement - M\xe9thodes par spectrom\xe9trie de rayons X | |
| Rev\xeatements m\xe9talliques et autres rev\xeatements inorganiques - Couches de conversion au chromate sur zinc, cadmium et alliages d'aluminium-zinc et de zinc-aluminium - M\xe9thodes d'essai | |
| Rev\xeatements m\xe9talliques et non m\xe9talliques - Mesurage de l'\xe9paisseur - M\xe9thode par r\xe9trodiffusion des rayons b\xeata RECTIFICATIF TECHNIQUE 1 | |
| Rev\xeatements m\xe9talliques et non m\xe9talliques - Mesurage de l'\xe9paisseur - M\xe9thode par r\xe9trodiffusion des rayons b\xeata | |
| Road Vehicles - Frontal Fixed Barrier Collision Test Method | |
| Road Vehicles - Safety Glazing Materials - Vocabulary First Edition | |
| Road Vehicles - Working Voltages for Lights Fitted to Motor Vehicles and to Their Trailers First Edition | |
| Rolling bearings \x97 Ceramic rolling elements \x97 Terms and characteristics of surface imperfections | |
| Rotary Pump Tests | |
| Roulements - Roulements \xe0 rouleaux coniques - Dimensions d\x92encombrement et d\xe9signation des s\xe9ries AMENDEMENT 1 | |
| Routine Maintenance of Concrete Bridges | |
| Rubans imprimants en papier ou en plastique - Caract\xe9ristiques des noyaux | |
| Rubber, vulcanized - Determination of tear strength (trouser, angle and crescent test pieces) | |
| Saffron (Crocus Sativus Linnaeus) - Part 1: Specification | |
| Saffron (Crocus Sativus Linnaeus) - Part 2: Test Methods | |
| Seamless Steel CO2 Cylinders for Fixed Fire-Fighting Installations on Ships | |
| Section Loss Determination of Damaged or Corroded Reinforcing Steel Bars | |
| Segni grafici per trazione elettrica ferroviaria, tranviaria e filoviaria | |
| Seismic Design of Liquid-Containing Concrete Structures (ACI 350.3-01) and Commentary (ACI 350.3R-01) | |
| Seismic Design of Liquid-Containing Concrete Structures and Commentary | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 1: Definitions, information and general principles | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 2: Ceramic and glass insulators for a.c. systems | |
| Selection and dimensioning of high-voltage insulators intended for use in polluted conditions Part 3: Polymer insulators for a.c. systems | |
| Sex toys - Design and safety requirements for products in direct contact with genitalia, the anus, or both | |
| Ships and marine technology \x97 Technical guidelines for active source exploration with ocean bottom seismometers (OBS) | |
| Significance of the Shrinkage-Compensati ng and Nonshrink Labels on Packaged Repair Materials | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9quipement de mesurage dimensionnel: Microm\xe8tres d'ext\xe9rieur - Caract\xe9ristiques de conception et caract\xe9ristiques m\xe9trologiques | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) - \xc9talons de longueur - Cales-\xe9talons RECTIFICATIF TECHNIQUE 1 | |
| Specification for Cast-in-Place Concrete Pipe | |
| Specification for Installation of Cementitious Grouting between Foundations and Equipment Bases | |
| Specification for Installation of Epoxy Grout between Foundations and Equipment Bases | |
| SPECIFICATION FOR STRUCTURAL JOINTS USING HIGH-STRENGTH BOLTS | |
| Specifications for Environmental Concrete Structures | |
| Standard Design and Construction Guidelines for Microtunneling | |
| State-of-the-Art Report on Anchorage to Concrete | |
| State-of-the-Art Report on Barge-Like Concrete Structures | |
| State-of-the-Art Report on High Strength Concrete | |
| State-of-the-Art Report on Offshore Concrete Structures for the Arctic | |
| Statistics \x97 Vocabulary and symbols \x97 Part 1: General statistical terms and terms used in probability | |
| Statistics \x97 Vocabulary and symbols \x97 Part 2: Applied statistics | |
| Statistics\x97Vocabu lary and symbols\x97Part 3: Design of experiments | |
| Statistics\x97Vocabu lary and symbols\x97Part 4: Survey sampling | |
| Steel Wire Ropes - Standard Designations | |
| Sustainability Assessment for Single Ply Roofing Membranes | |
| Symbole de base pour les rayonnements ionisants | |
| Syst\xe8mes de canalisations en mati\xe8res plastiques - Assemblages m\xe9caniques entre raccords et tubes sous pression - M\xe9thode d\x92essai pour l\x92\xe9tanch\xe9it \xe9 sous pression n\xe9gative | |
| Syst\xe8mes de canalisations en plastique - Assemblages m\xe9caniques entre raccords et tubes sous pression - M\xe9thode d\x92essai de r\xe9sistance \xe0 l\x92arrachement sous une force longitudinale constante | |
| Syst\xe8mes de canalisations en plastique - Assemblages m\xe9caniques entre raccords et tubes sous pression - M\xe9thode d\x92essai pour l\x92\xe9tanch\xe9it \xe9 sous pression interne de montages soumis \xe0 une courbure | |
| Syst\xe8mes de canalisations en plastique pour l'\xe9vacuation des eaux-vannes et des eaux us\xe9es (\xe0 basse et \xe0 haute temp\xe9rature) \xe0 l'int\xe9rieur des b\xe2timents - Poly(chlorure de vinyle) non plastifi\xe9 (PVC-U)... | |
| Technical Report on the Application and Interpretation of Data from External Coupons Used in the Evaluation of Cathodically Protected Metallic Structures | |
| Technical Requirements for Vehicle Networking Management Systems Based on 3 Access Point Name (3APN) | |
| Technique du vide - \xc9talonnage des spectrom\xe8tres de masse d\xe9tecteurs de fuites | |
| Technique du vide - Vocabulaire - Partie 3: Manom\xe8tres de pression totale et analyseurs de pressions partielles | |
| Television - Video Payload Identification for Digital Television Interfaces | |
| Temperature Limit and Supervisory Switches | |
| Textile glass - Chopped-strand and continuous-filament mats - Determination of average thickness, thickness under load and recovery after compression AMENDMENT 1 | |
| Textile Machinery and Accessories - Bearings for Bottom Rollers and Allied Dimensions - Caps with Central Nose and Caps with Side Lugs First Edition | |
| Textiles - Armures - D\xe9finitions des termes g\xe9n\xe9raux et des armures de base | |
| Tightness Testing of Environmental Engineering Concrete Structures (ACI 350.1-01) and Commentary (ACI 350.1R-01) | |
| TP-02A Air Leakage Test Procedure for Electrical Connectors | |
| TP-02B Air Leakage Test Procedure for Electrical Connectors | |
| TP-04 Normal Force Test Procedure for Electrical Connectors | |
| TP-06A Contact Resistance Test Procedure for Electrical Connectors | |
| TP-100 Marking Permanence Test Procedure for Electrical Connectors and Sockets | |
| TP-11A Resistance to Solvents Test Procedure for Electrical Connectors and Sockets | |
| TP-12 Restricted Entry Test Procedure for Electrical Contacts | |
| TP-15 Contact Strength Test Procedure for Electrical Connectors | |
| TP-16 Stripping Force Test Procedure for Solderless Wrapped Electrical Connectors | |
| TP-23A Low Level Contact Resistance Test Procedure for Electrical Connectors | |
| TP-28C Vibration Test Procedure for Electrical Connectors and Sockets | |
| TP-30 Capacitance Test Procedure for Electrical Connectors | |
| TP-33 Inductance of Electrical Connectors | |
| Tp-33A Inductance Measurement Test Procedure for Electrical Connectors (100 nH - 100 mH) | |
| TP-36A Test Procedure for Determination of Gas-Tight Characteristics for Electrical Connectors, Sockets and/or Contact Systems | |
| TP-41B Cable Flexing Test Procedure for Electrical Connectors | |
| TP-42A Impact Test Procedure for Electrical Connectors | |
| TP-43A Cable Clamping (Bending Moment) Test Procedure for Electrical Connectors | |
| TP-48 Test Procedure for Metallic Coating Thickness Measurements of Contacts | |
| TP-50A Dust (Fine Sand) Test Procedure for Electrical Connectors | |
| TP-51 Ice Resistance of Mated Connectors Test Procedure for Electrical Connectors | |
| TP-56 Resistance to Soldering Heat Test Procedure for Electrical Connectors | |
| TP-59 Low Temperature Test Procedure for Electrical Connectors | |
| TP-60 General Methods for Porosity Testing of Contact Finishes for Electrical Connectors | |
| TP-71 Solder Wicking Test Procedure for Electrical Connectors/Sockets (Wave Solder Technique) | |
| TP-75 Lightning Strike Test Procedure for Electrical Connectors | |
| TP-81 Combustion Characteristics of Connector Housings, Connector Assemblies and Sockets | |
| TP-89 Test Procedures for Electrical Connectors for Space Applications | |
| TP-91 Dust Test for Electrical Connectors and Sockets | |
| TRACE CONCENTRATIONS OF LEAD IN GASOLINE OR PETROLEUM NAPHTHAS | |
| TRACE SULFUR IN PETROLEUM DISTILLATES BY THE NICKEL REDUCTION METHOD | |
| Tracteurs agricoles et forestiers - Structures de protection contre le retournement (ROPS) - M\xe9thode d'essai dynamique et conditions d'acceptation | |
| Tractors and Machinery for Agriculture and Forestry - Seat Reference Point - Method of Determination AMENDMENT 1 | |
| Tractors and Machinery for Agriculture and Forestry - Seat Reference Point - Method of Determination | |
| Traitement de l'information - Chargeur interchangeable \xe0 six disques magn\xe9tiques - Sch\xe9ma de piste | |
| Traitement de l'information - Chargeur interchangeable monodisque magn\xe9tique - Sch\xe9ma de piste | |
| Traitement de l\x92information - Chargeur interchangeable \xe0 onze disques magn\xe9tiques - Caract\xe9ristiques m\xe9caniques et magn\xe9tiques | |
| Traitement de l\x92information - Chargeur interchangeable monodisque magn\xe9tique \xe0 chargement vertical - Caract\xe9ristiques m\xe9caniques et magn\xe9tiques | |
| Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 1: Diam\xe8tres int\xe9rieurs, sections, tol\xe9rances et codes d'identification dimensionnelle RECTIFICATIF TECHNIQUE 1 | |
| Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 1: Diam\xe8tres int\xe9rieurs, sections, tol\xe9rances et codes d'identification dimensionnelle RECTIFICATIF TECHNIQUE 2 | |
| Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 1: Diam\xe8tres int\xe9rieurs, sections, tol\xe9rances et codes d'identification dimensionnelle | |
| Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 2: Dimensions des logements pour applications g\xe9n\xe9rales | |
| Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 3: Crit\xe8res de qualit\xe9 AMENDEMENT 1 | |
| Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 3: Crit\xe8res de qualit\xe9 | |
| Transmissions hydrauliques et pneumatiques - Joints toriques - Partie 5: Mat\xe9riaux \xe9lastom\xe8res convenant pour applications industrielles | |
| Treatment of Exposed Epoxy-Coated Reinforcement in Repair | |
| Trial-Use Standard Guide on Solid-State Devices: Varactor Measurements Part II - Characterization of Large-Signal Devices | |
| Tubes et raccords en acier - Symboles \xe0 utiliser dans les sp\xe9cifications - Partie 1 : Tubes et accessoires de forme tubulaire \xe0 section circulaire | |
| Tubes et raccords en acier - Symboles \xe0 utiliser dans les sp\xe9cifications - Partie 2 : Profils creux \xe0 section carr\xe9e ou rectangulaire | |
| Tubes et raccords en acier - Symboles \xe0 utiliser dans les sp\xe9cifications - Partie 3: Accessoires tubulaires \xe0 section circulaire | |
| Tubes et raccords en polychlorure de vinyle chlor\xe9 (PVC-C) k Sp\xe9cification et d\xe9termination de la masse volumique | |
| Twenty-Four Month Dermal Carcinogenesis/Chron ic Toxicity Screening Bioassay of Refinery Streams in C3H/HeJ Mice (AP-190r) | |
| UL Standard for Safety Limit Controls | |
| UL Standard for Safety Measuring and Reporting Circular Economy Aspects of Products, Sites and Organizations | |
| UL Standard for Safety Measuring and Reporting Circularity and End-of-Life Management for Electrification Products \x96 General Sustainability Requirements and Practices | |
| UL Standard for Safety Measuring and Reporting Circularity of Li-ion and Other Secondary Batteries | |
| UL Standard for Safety Medium Voltage Power Conversion Equipment | |
| UL Standard for Safety Product-level Climate Risk Assessment and Adaptation Management \x96 General Sustainability Requirements and Practices | |
| UL Standard for Safety Waterflow Indicators for Fire Protective Signaling Systems | |
| Unplasticized Polyvinyl Chloride (PVC) Pipes - Effect of Sulphuric Acid - Requirement and Test Method | |
| Unplasticized Polyvinyl Chloride (PVC) Pipes - Specification and Determination of Resistance to Acetone | |
| Unplasticized Polyvinyl Chloride (PVC) Pipes - Specification and Measurement of Opacity | |
| Unplasticized Polyvinyl Chloride (PVC) Pressure Pipes - Metric Series - Dimensions of Adapter for Backing Flange | |
| Use of Hydrodemolition for Concrete Removal in Unbonded Post-Tensioned Systems | |
| V\xe9hicules routiers - Connecteurs \xe0 haute tension pour bobines et distributeurs d\x92allumage - Partie 2: Type m\xe2le | |
| V\xe9hicules routiers - Dispositifs d'attelage - Interchangeabilit\xe 9 | |
| V\xe9hicules routiers - Porte-injecteurs avec corps, types 8 .et 10, et porte-injecteurs avec plats de fixation, types 9 et 11 | |
| V\xe9hicules routiers - Raccords de contr\xf4le de pression pour syst\xe8mes de freinage pneumatique \xe0 air comprim\xe9 | |
| V\xe9hicules routiers - Vitrages de s\xe9curit\xe9 - Essais m\xe9caniques | |
| V\xe9hicules routiers - Vitrages de s\xe9curit\xe9 - M\xe9thodes d\x92essai des propri\xe9t\xe9s optiques | |
| V\xe9hicules toutiers - Raccords \xe0 haute tension pour bobines et distributeurs d\x92allumage - Partie 1 : Type femelle | |
| Vacuum Technology - Vocabulary - Part 1: General Terms | |
| Vacuum Technology - Vocabulary - Part 2: Vacuum Pumps and Related Terms | |
| Vanille - Vocabulaire | |
| Variante n. 1 | |
| Vernier callipers reading to 0,l and 0,05 mm | |
| Verre textile - Fils - Base de sp\xe9cification | |
| Viandes et produits \xe0 base de viande - D\xe9termination de la teneur en hydroxyproline | |
| Voitures particuli\xe8res - Dispositif de lave-glace du pare-brise - M\xe9thodes d'essai AMENDEMENT 1 | |
| Voitures particuli\xe8res - Dispositif de lave-glace du pare-brise - M\xe9thodes d\x92essai | |
| Wearable Consumer Electronic Devices\x97Overview and Architecture | |
| Wrought Copper and Copper Alloys - Cold-Rolled Flat Products Delivered in Straight Lengths (Sheet) - Dimensions and Tolerances | |
| Wrought Copper and Copper Alloys - Cold-Rolled Flat Products in Coils or on Reels (Strip) - Dimensions and Tolerances | |
| Wrought Copper and Copper Alloys - Drawn Hexagonal Bars - All Minus Tolerances on Width Across Flats and Form Tolerances | |
| Wrought Copper and Copper Alloys - Drawn Round Bars - All Minus Tolerances on Diameter and Form Tolerances | |
| Wrought Copper and Copper Alloys - Drawn Round Wire - Tolerances on Diameter | |
| Wrought Copper and Copper Alloys - Drawn Square Bars - All Minus Tolerances on Width Across Flats and Form Tolerances | |
| Wrought Copper and Copper Alloys - Extruded Round, Square or Hexagonal Bars - Dimensions and Tolerances |
| << Prev | Next >> |