Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
41
42
43
44
45
46
47
48
49
50
51
52
60
70
80
90
100
110
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| 1.5 Gb/s1 Signal/Data Serial Interface | |
| 2-CHLORO-1,4-BENZENE DIAMINE CAS # 615-66-7 ORAL RISK ASSESSMENT DOCUMENT | |
| \xc9ducation et services de formation \x97 Exigences relatives aux services d'enseignement \xe0 distance | |
| \xc9l\xe9ments standard pour la construction des machines-outils - T\xeates multibroches - Dimensions de l\x92enveloppe et de l\x92arbre d\x92entra\xeenement | |
| \xc9l\xe9ments standard pour la construction des machinesoutils - T\xeates multibroches - Dimensions de l\x92enveloppe et de l\x92arbre d\x92entra\xeenement AMENDEMENT 1 | |
| \xc9l\xe9ments standards pour la construction des machines-outils - Nez de broches et douilles de r\xe9glage pour t\xeates multibroches | |
| \xc9puration de l\x92air et autres gaz - Terminologie | |
| \xc9quipement de production pour syst\xe8mes microtechniques - Interface entre outil et dispositif de manipulation | |
| \xc9valuation des acquis de la formation - Recommandations | |
| A COMPARISON OF THE RATE OF DEVELOPMENT OF HEXANE NEUROPATHY IN WEANLING AND YOUNG ADULT RATS | |
| A\xe9ronautique et espace - Tubes - Diam\xe8tres ext\xe9rieurs et \xe9paisseurs - Dimensions m\xe9triques | |
| Abrasifs appliqu\xe9s - Bandes abrasives - S\xe9lection des combinaisons largeurs/longueurs | |
| Abrasive Discs - Designation, Dimensions and Tolerances - Selection of Disc Outside Diameter/Centre Hole Diameter Combinations Second Edition | |
| Abrogazione Norme CEI CT 301-22G | |
| Acide phosphorique \xe0 usage industriel - Dosage des sulfates - M\xe9thode par r\xe9duction et titrim\xe9trie | |
| Acoustics \x97 Statistical distribution of hearing thresholds of otologically normal persons in the age range from 18 years to 25 years under free-field listening conditions | |
| Acoustique - Mesurage du bruit \xe0 bord des bateaux RECTIFICATIF TECHNIQUE 1 | |
| Acoustique - Mesurage du bruit \xe0 bord des bateaux | |
| Acoustique - Mesurage du bruit a\xe9rien \xe9mis par les bateaux de navigation int\xe9rieure et portuaire - AMENDEMENT 1 | |
| Acoustique - Mesurage du bruit a\xe9rien \xe9mis par les bateaux de navigation int\xe9rieure et portuaire | |
| Adoption of MIPI Alliance Specification for A-PHY Interface (A-PHY) Version 1.0 | |
| Adventure tourism \x97 Hiking and trekking activities \x97 Requirements and recommendations | |
| AES Information Document for Digital Audio Engineering - Guidelines for the Use of the AES3 Interface | |
| Air Eliminators | |
| Air intake filter systems for rotary machinery \x97 Part 4: Test methods for static filter systems in coastal and offshore environments | |
| Air intake filter systems for rotary machinery \x97 Test methods \x97 Part 2: Filter element endurance test in fog and mist environments | |
| Air intake filter systems for rotary machinery \x97 Test methods \x97 Part 3: Mechanical integrity of filter elements | |
| Aliments des animaux - D\xe9termination de l'activit\xe9 phytasique | |
| Aluminium Fluoride for Industrial Use - Preparation and Storage of Test Samples | |
| Aluminium Oxide Primarily Used for the Production of Aluminium - Particle Size Analysis - Sieving Method | |
| Ammonium Nitrate for Industrial Use - Determination of Matter Insoluble in Water - Gravimetric Method | |
| Ammonium Sulphate for Industrial Use - Determination of Matter Insoluble in Water - Gravimetric Method | |
| Analyse chimique des surfaces - Spectroscopie des \xe9lectrons Auger - Indication des m\xe9thodes mises en \x9cuvre pour le contr\xf4le et la correction de la charg | |
| Analyse sensorielle - M\xe9thodologie - Plans de pr\xe9sentation en blocs incomplets \xe9quilibr\xe9s | |
| Anodisation de l'aluminium et de ses alliages - \xc9valuation de la qualit\xe9 des couches anodiques colmat\xe9es par mesurage de l'admittance | |
| APPARENT BULK DENSITY OF CATALYST PARTICLES | |
| Application guide to standards for noise measurement instrumentation | |
| Application Programming Interfaces (APIs) for Deep Learning (DL) Inference Engines | |
| Artificial Intelligence (AI) Model Representation, Compression, Distribution, and Management | |
| ASHRAE Online Elearning Course ASHRAE eLearning Module: Standard 189.1 2011 \x96 Water, Sites and Materials (Dual) | |
| Balancing Machines - Description and Evaluation | |
| Basic Quantities in Cutting and Grinding - Part 1: Geometry of the Active Part of Cutting Tools - General Terms, Reference Systems, Tool and Working Angles, Chip Breakers | |
| Bitumen and bituminous binders \x97 Determination of particle polarity of bituminous emulsions | |
| Bitumen and bituminous binders \x97 Determination of water content in bituminous emulsions \x97 Azeotropic distillation method | |
| Building information models \x97 Information delivery manual \x97 Part 3: Data schema | |
| C\xf4nes d'emmanchement d'outils \xe0 conicit\xe9 7/24 pour changement manuel | |
| Caoutchouc non vulcanis\xe9 - D\xe9terminations utilisant un consistom\xe8tre \xe0 disque de cisaillement - Partie 1: D\xe9termination de l\x92indice consistom\xe9trique Mooney | |
| Caoutchouc non vulcanis\xe9 - D\xe9terminations utilisant un consistom\xe8tre \xe0 disque de cisaillement - Partie 2: D\xe9termination des caract\xe9ristiques de pr\xe9vulcanisation | |
| Caoutchouc non vulcanis\xe9 - D\xe9terminations utilisant un consistom\xe8tre \xe0 disque de cisaillement - Partie 3: D\xe9termination de la valeur Delta Mooney pour le caoutchouc styr\xe8ne-butadi\xe 8ne polym\xe9ris\xe9 en \xe9mulsion, \xe9tendu... | |
| Caoutchouc non vulcanis\xe9 - D\xe9terminations utilisant un consistom\xe8tre \xe0 disque de cisaillement - Partie 4: D\xe9termination du taux de relaxation de contrainte Mooney | |
| Caoutchouc non vulcanis\xe9 - D\xe9terminations utilisant un consistom\xe8tre \xe0 disque de cisaillement Partie 1: D\xe9termination de l'indice consistom\xe9trique Mooney RECTIFICATIF TECHNIQUE 1 | |
| Caoutchouc vulcanis\xe9 - D\xe9termination du retrait \xe0 basse temp\xe9rature (essai TR) | |
| Carbon-fibre-reinfor ced plastics - Determination of the size and aspect ratio of crushed objects AMENDMENT 1 | |
| Carbon-fibre-reinfor ced plastics - Determination of the size and aspect ratio of crushed objects | |
| CARCINOGENIC POTENTIAL OF PETROLEUM COKES AND PROCESS PRODUCTS 1. COKING PROCESS AND SAMPLE CHARACTERIZATION | |
| Carcinogenic Potential Petroleum Coke and Process Products | |
| Cellular Plastics, Rigid - Determination of Water Absorption Second Edition | |
| Cement \x97 Test methods \x97 Part 2: Chemical analysis by X-ray fluorescence | |
| Central Station Service for Fire Alarms and Protective Equipment Supervision | |
| Champs de rayonnement de r\xe9f\xe9rence pour la radioprotection - D\xe9finitions et concepts fondamentaux AMENDEMENT 1: Point de r\xe9f\xe9rence des dosim\xe8tres personnels | |
| Champs de rayonnement de r\xe9f\xe9rence pour la radioprotection - D\xe9finitions et concepts fondamentaux | |
| Cheese and Processed Cheese Products - Determination of Citric Acid Content (Reference Method); (Erratum-1981) | |
| Chimie de la combustion - Production et mesurage des a\xe9rosols | |
| Cigarettes and filter rods Determination of nominal diameter Method using a laser beam measuring apparatus | |
| Ciments - M\xe9thodes d'essai - Partie 1: Analyse chimique par voie humide | |
| Cin\xe9matographie - Chargeur, mod\xe8le 1, pour cam\xe9ra 8 mm type S - Longueur de film entra\xeen\xe9, encoche d'\xe9limination de perforation et encoche de fin de prise de vues - Sp\xe9cifications... | |
| Cin\xe9matographie - Film cin\xe9matographique 35 mm \xe0 perforations 16 mm (1-3-0) - Dimensions de coupe et de perforation | |
| Cin\xe9matographie - Surface d'image 8 mm type S produite par tirage sur film cin\xe9matographique 35 mm perfor\xe9 8 mm type S, 2R-4,227 (1664) ou 5R-4,234 (1667) - Position et dimensions... | |
| Cinematography - 16 mm Motion-Picture Film Perforated 8 mm Type S (1-3) and (1-4) - Cutting and Perforating Dimensions | |
| Cinematography - 65 mm and 70 mm Unexposed Motion-Picture Film - Cutting and Perforating Dimensions Fourth Edition | |
| Cinematography - Image Area Produced by Camera Aperture on 35 mm Motion-Picture Film - Position and Dimensions Second Edition | |
| Cinematography - Magnetic Stripes and Recording Head Gaps for Sound Record on 8 mm Type S Motion-Picture Films - Position and Width Dimensions | |
| Cinematography - Magnetic Stripes for Sound Records on 35 mm Motion-Picture Film Perforated 8 mm Type S-5R (1-3-5-7-0) - Positions and Width Dimensions | |
| Cinematography - Maximum Projectable Image Area on 35 mm Motion-Picture Film - Position and Dimensions Second Edition | |
| Cinematography - Motion-Picture Camera Cartridge, 8 mm Type S, Model II - Film Load Position First Edition | |
| Cinematography - Recorded Characteristics for Magnetic Sound Record on 8 mm Type S Motion-Picture Prints and Full-Coat Magnetic Film Perforated 8 mm Type S - Specifications | |
| Cinematography - Screen Luminance for the Projection of Motion-Picture Films in Indoor Theatres First Edition; | |
| Code of Standard Practice for Steel Buildings and Bridges | |
| Combustibles gazeux non p\xe9troliers liqu\xe9fi\xe9s r\xe9frig\xe9r\xe9s - Dim\xe9thyl\xe9ther (DME) - M\xe9thode d'\xe9chantillonnage manuel sur des terminaux \xe0 terre | |
| Commande num\xe9rique des machines - Symboles | |
| Comparison of toxic gas data from different tests \x97 Part 1: Guidance and requirements | |
| Compressed Air and Gas Drying | |
| Compressed Air | |
| CONCENTRATION-RELATE D EFFECTS OF HEXANE ON EVOKED RESPONESES FROM BRAIN AND PERIPHERAL NERVE | |
| Condition monitoring and diagnostics of machines - Ultrasound - General guidelines, procedures and validation | |
| Condition monitoring and diagnostics of machines - Ultrasound - Part 2: Procedures and validation | |
| Condition monitoring and diagnostics of machines \x97 Ultrasound \x97 Part 1: General guidelines | |
| Condoms - Guidance on clinical studies - Part 1: Male condoms, clinical function studies based on self-reports | |
| Condoms - Guidance on clinical studies - Part 2: Female condoms, clinical function studies based on self-reports | |
| Condoms \x97 Determination of nitrosamines migrating from natural rubber latex condoms | |
| Corps gras d'origine v\xe9g\xe9tale - D\xe9termination des produits de d\xe9composition des chlorophylles a et a' (ph\xe9ophytines a, a' et pyroph\xe9ophytines) | |
| Corps gras d'origine v\xe9g\xe9tale - Diacylglyc\xe9rols isom\xe9riques - D\xe9termination des teneurs relatives en 1,2- et 1,3-diacylglyc\xe9ro ls | |
| Corps gras d\x92origine v\xe9g\xe9tale - D\xe9termination des produits de d\xe9composition des chlorophylles a et a\x92 (ph\xe9ophytines a, a\x92 et pyroph\xe9ophytines) AMENDEMENT 1 | |
| Cosm\xe9tiques - Microbiologie - Lignes directrices pour l'appr\xe9ciation du risque et l'identification de produits \xe0 faible risque microbiologique | |
| D\xe9finitions de base pour la coupe et la rectification - Partie 2 : G\xe9om\xe9trie de la partie active des outils coupants - Formules de conversion g\xe9n\xe9rales liant les angles de... | |
| DEFINITIONS AND GENERAL STANDARDS FOR WIRES AND GABLES | |
| Descriptive Details for Food Service Equipment Standards | |
| Diesel Engines - High-Pressure Fuel Injection Pipe End-Connections with 60 Degree Female Cone | |
| Document management applications \x97 Quality control for scanning office documents in colour | |
| Education and learning services \x97 Vocabulary | |
| Effects of n-Hexane in Man and Animals | |
| Electric drives - Dictionary | |
| Electric Traction System for High-Speed Electric Multiple Units (EMUs) | |
| Electrical Isolation/Continuity and Coating Issues for Offshore Pipeline Cathodic Protection Systems | |
| Electron Device Type Registration/Reregis tration | |
| Electron Tubes, Type Designation System for | |
| Embossed credit cards - Specifications, numbering system and registration procedure | |
| Emergency lighting | |
| Errata to Recommended Practice for Motor Protection in Industrial and Commercial Power Systems | |
| Errata to Specification Format for Single-Degree-of-Fre edom Spring-Restrained Rate Gyros | |
| Especificaciones para Concreto Estructural | |
| Essais de r\xe9sistance au feu - Partie 2: Assemblage de porte pali\xe8re d\x92ascenseur | |
| Essais in situ de filtres et syst\xe8mes de ventilation g\xe9n\xe9rale pour la mesure de l'efficacit\xe9 en fonction de la taille des particules et de la perte de charge | |
| Evaluation of Ground Water Supply for Nuclear Power Sites | |
| Farm Raw Milk Storage Tanks | |
| Filetages m\xe9triques trap\xe9zo\xefdaux ISO - Vue d\x92ensemble | |
| Filtres \xe0 haut rendement et filtres pour l'\xe9limination des particules dans l'air - Partie 3: M\xe9thode d'essai des filtres \xe0 feuille plate | |
| Filtres \xe0 haut rendement et filtres pour l'\xe9limination des particules dans l'air - Partie 4: M\xe9thode d'essai pour d\xe9terminer l'\xe9tanch\xe9it\xe 9 de l'\xe9l\xe9ment filtrant (m\xe9thode scan) | |
| Filtres \xe0 haut rendement et filtres pour l'\xe9limination des particules dans l'air \x97 Partie 2: Production d'a\xe9rosol, \xe9quipement de mesure et statistique de comptage de particules | |
| Filtres \xe0 haut rendement et filtres pour l'\xe9limination des particules dans l'air \x97 Partie 5: M\xe9thode d'essai des \xe9l\xe9ments filtrants | |
| Final Report from Micro PIM Workshop | |
| Fire Alarm Signaling Systems | |
| FIRE PROTECTION STANDARD FOR PLEASURE AND COMMERCIAL MOTOR CRAFT | |
| Fire resistance tests - Door and shutter assemblies - Part 1: General requirements | |
| Fire resistance tests - Part 3: Door and shutter assemblies horizontally oriented | |
| Fire resistance tests \x97 Door and shutter assemblies \x97 Part 4: Linear joint fire seal materials used to seal the gap between a fire door frame and the supporting construction... | |
| Fire tests \x97 Uncertainty of measurements in fire tests | |
| Fire-Resistance Tests - Glazed Elements First Edition; (Amendment Slip-1977) (Amendment 1-1984) | |
| Flexible Optical Service Unit (OSUFlex) of Optical Transport Network (OTN) in Power Systems | |
| Fontes aust\xe9nitiques - Classification RECTIFICATIF TECHNIQUE 1 | |
| Food equipment | |
| Fraises \xe0 surfacer et \xe0 surfacer et dresser, \xe0 montage direct sur nez de broches \xe0 conicit\xe9 7/24 - Dimensions d'interchangeabilit\ xe9 - Mandrins de centrage | |
| Fraises \xe0 surfacer et \xe0 surfacer et dresser, \xe0 montage direct sur nez de broches \xe0 tonicit\xe9 7/24 - Fraises \xe0 lames amovibles | |
| Fromages et fromages fondus \x97 D\xe9termination de la teneur en phosphore total \x97 M\xe9thode par spectrom\xe9trie d'absorption mol\xe9culaire | |
| Furniture Packages | |
| Gage Calibration Requirements and Procedures for Thread Gages | |
| General Purpose OH1 Rotodynamic Pumps Horizontal - Overhung - Flexibly Coupled - Foot Mounted Pumps | |
| Glass in building - Pendulum impact testing and classification of safety glass | |
| Grandeurs de base en usinage et rectification - Partie 3 : Grandeurs g\xe9om\xe9triques et cin\xe9matiques en usinage | |
| Grandeurs de base en usinage et rectification - Partie 4 : Forces, \xe9nergie et puissance | |
| Grandeurs de base en usinage et rectification - Partie 5 : Terminologie de base propre au meulage | |
| Grandeurs de base pour la coupe et la rectification - Partie 1 : G\xe9om\xe9trie de la partie active des outils coupants - Notions g\xe9n\xe9rales, syst\xe8me de r\xe9f\xe9rence, angles de l\x92outil... | |
| Graphical symbols for electrical circuits of railway signalling systems | |
| Guide for Concrete Floor and Slab Construction | |
| Guide for Concrete Slabs that Receive Moisture-Sensitive Flooring Materials | |
| Guide for Economic Loss Evaluation of Sensitive Industrial Customers Caused by Voltage Sags | |
| Guide for In-Service Application, Care, Maintenance, and Testing of Insulating Flexible Sling for Live Working | |
| Guide for Joint Use of Utility Poles with Wireline and/or Wireless Facilities | |
| Guide for Live-Working Robots for Electric Distribution Systems | |
| Guide for Synchronous Monitoring of the Magnitude and Distribution of Stray Current in Urban Rail Transit\x92s Direct Current Traction System | |
| Guide for Technical Requirements and Test Methods for Industrial Ultrashort Pulse Lasers | |
| Guide for Technology of Alternating Current Standard Signal Source with Digital Output | |
| Guide for Testing Equipment for Direct Current Electrical Energy Meters | |
| Guide for the characterisation and identification of variable speed electrical drives by means of a plate | |
| Guideline for Condition Assessment of the Building Envelope | |
| Guidelines for Using Anthropometric Data in Product Design | |
| Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 11: Stone hammers | |
| Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders AMENDMENT 1: Cupped wire brushes | |
| Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders | |
| Hand-held portable power tools \x97 Test methods for evaluation of vibration emission \x97 Part 13: Fastener driving tools | |
| Health informatics \x97 Framework for healthcare and related data reporting | |
| Hearing aids - Part 9: Methods of measurement of characteristics of hearing aids with bone vibrator output | |
| Hearing aids - Symbols and other markings on hearing aids and related equipment | |
| Hearing aids - Systems and integrative devices | |
| High fidelity equipments and systems - Minimum requirements | |
| High fidelity equipments and systems Minimum requirements | |
| High-efficiency filters and filter media for removing particles in air \x97 Part 1: Classification, performance testing and marking | |
| Hydraulic Fluid Power - Positive Displacement Pumps and Motors - Dimensions and Identification Code for Mounting Flanges and Shaft Ends - Part 3: Polygonal Flanges (Including Circular Flanges) | |
| Hydraulic fluid power Dimensions and identification code for mounting flanges and shaft ends of displacement pumps and motors Part 2: Metric series Technical Corrigendum 1 | |
| Hydrogen Technologies Code | |
| Information and documentation \x97 Management systems for records \x97 Guidelines for implementation AMENDMENT 1: Non conformities, corrective actions and climate change requirements | |
| Information and documentation \x97 Management systems for records \x97 Requirements AMENDMENT 1: Climate action changes | |
| Information et documentation - Syst\xe8me de gestion des documents d\x92activit\xe9 - Lignes directrices de mise en oeuvre | |
| Information et documentation - Syst\xe8mes de gestion des documents d'activit\xe9 - Exigences | |
| Information et documentation - Syst\xe8mes de gestion des documents d\x92activit\xe9 - Principes essentiels et vocabulaire | |
| Information Processing - Representation of SI and Other Units in Systems with Limited Character Sets | |
| Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking - Part 1: Fast networking & transport layer protocol (FNTP) AMENDMENT 1 | |
| Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking - Part 1: Fast networking & transport layer protocol (FNTP) | |
| Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking - Part 2: Legacy system support AMENDMENT 1 | |
| Intelligent transport systems - Communication access for land mobiles (CALM) - Non-IP networking - Part 2: Legacy system support | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 Non-IP networking | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 Satellite networks | |
| IRE Standards on Antennas and Waveguides: Definitions for Waveguide Components | |
| ISO metric trapezoidal screw threads - Tolerances | |
| ISO metric trapezoidal screw threads \x97 Tolerances \x97 Part 2: Limits of sizes | |
| ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE 802.20 | |
| Laine - D\xe9termination calorim\xe9trique de la cystine et de la cyst\xe9ine dans les hydrolysats | |
| Laine - D\xe9termination de la teneur en acide cyst\xe9ique dans les hydrolysats de laine par \xe9lectrophor\xe8se sur papier et \x92 calorim\xe9trie | |
| Laine - D\xe9termination de la teneur en alacali | |
| Lames de scies circulaires \xe0 bois - Dimensions | |
| Light Water Reactor Risk-Informed, Performance-Based Design | |
| Lignes directrices pour la comparaison de donn\xe9es de gaz toxiques entre divers mod\xe8les et \xe9chelles de feu physiques | |
| Logistics Operation Process in a Smart Factory | |
| M\xe9decine bucco-dentaire - Adh\xe9rence - Essai de r\xe9sistance au cisaillement sur \xe9chantillons \xe0 bord entaill\xe9 | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 10: Marteaux \xe0 percussion, perforateurs et brise-b\xe9ton | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 2: Cl\xe9s, boulonneuses et visseuses | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 3: Polisseuses-lustreus es et ponceuses rotatives, orbitales et orbitales sp\xe9ciales | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 4: Meuleuses droites | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 5: Perceuses et perceuses \xe0 percussion | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 7: Grignoteuses et cisailles | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 8: Scies, polisseuses et limes alternatives, et petites scies oscillantes ou circulaires | |
| Machines \xe0 moteur portatives - M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations - Partie 9: Marteaux d\xe9rouilleurs et marteaux \xe0 aiguilles | |
| Machines \xe0 moteur portatives - M\xe9thodes d\x92essai pour l\x92\xe9valuation de l\x92\xe9mission de vibrations - Partie 12: Meuleuses d\x92outillage | |
| Machines \xe0 moteur portatives - M\xe9thodes d\x92essai pour l\x92\xe9valuation de l\x92\xe9mission de vibrations - Partie 2: Cl\xe9s, boulonneuses et visseuses AMENDEMENT 1: Modification de l\x92Annexe C - Dispositifs de freinage... | |
| Machines \xe0 moteur portatives - M\xe9thodes d\x92essai pour l\x92\xe9valuation de l\x92\xe9mission de vibrations - Partie 4: Meuleuses droites AMENDEMENT 1: Brosses m\xe9talliques rondes | |
| Machines \xe0 moteur portatives - M\xe9thodes d\x92essai pour l\x92\xe9valuation de l\x92\xe9mission de vibrations - Partie 5: Perceuses et perceuses \xe0 percussion AMENDEMENT 1: Force d\x92avance | |
| Machines \xe0 moteur portatives - M\xe9thodes d\x92essai pour l\x92\xe9valuation de l\x92\xe9mission de vibrations - Partie 8: Scies, polisseuses et limes alternatives, et petites scies oscillantes ou circulaires AMENDEMENT 1: Polisseuses,... | |
| Machines \xe0 moteur portatives \x97 M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations \x97 Partie 6: Marteaux fouloirs | |
| Machines \xe0 moteur portatives \x97 M\xe9thodes d'essai pour l'\xe9valuation de l'\xe9mission de vibrations \x97 Partie 8: Scies, polisseuses et limes alternatives, et petites scies oscillantes ou circulaires AMENDEMENT 2: Couteaux... | |
| Machines-outils - C\xf4nes pour emmanchements d'outils \xe0 faible conicit\xe9 | |
| Machines-outils - Pointes de tours - Dimensions d'interchangeabilit\ xe9 | |
| Machining & Machinability of PM Components Machining & Machinability of PM Components | |
| Materials used as cigarette papers, filter plug wrap and filter joining paper, including materials having an oriented permeable zone Determination of air permeability | |
| Measurement of Oxygen Transfer in Clean Water Second Edition | |
| Mesure de d\xe9bit d\x92eau dans les conduites ferm\xe9es - M\xe9thodes par traceurs - Partie VII : M\xe9thode du temps de transit, utilisant des traceurs radioactifs | |
| Mesure de d\xe9bit de l\x92eau dans les conduites ferm\xe9es - M\xe9thodes par traceurs - Partie I : G\xe9n\xe9ralit\xe9s | |
| Mesure de d\xe9bit de l\x92eau dans les conduites ferm\xe9es - M\xe9thodes par traceurs - Partie II : M\xe9thode d\x92injection \xe0 d\xe9bit constant, utilisant des traceurs non radio-actifs | |
| Mesure de d\xe9bit de l\x92eau dans les conduites ferm\xe9es - M\xe9thodes par traceurs - Partie Ill : M\xe9thode d\x92injection \xe0 d\xe9bit constant, utilisant des traceurs radioactifs | |
| Mesure de d\xe9bit de l\x92eau dans les conduites ferm\xe9es - M\xe9thodes par traceurs - Partie VI : M\xe9thode du temps de transit utilisant des traceurs non radioactifs | |
| Metal Powder Production and Practices | |
| Method of Testing Automatic Ice Makers | |
| Methods for Calculating Fan Sound Ratings from Laboratory Test Data | |
| Methods of test for petroleum and its products - BS 2000-291: Bitumen and bituminous binders - Determination of water content in bitumen emulsions - Azeotropic distillation method | |
| Methods of test for petroleum and its products - BS 2000-292: Bitumen and bituminous binders - Determination of particle polarity of bitumen emulsions | |
| Methods of testing cement - Determination of the heat of hydration - Part 1: Solution method | |
| Methods of testing cement - Determination of the heat of hydration - Part 2: Semi-adiabatic method | |
| Microbeam analysis \x97 Analytical transmission electron microscopy \x97 Methods for calibrating image magnification by using reference materials having periodic structures | |
| Milk products \x97 Enumeration of presumptive bifidobacteria \x97 Colony count technique at 37 degree C | |
| Mod\xe8les des informations de la construction - Protocole d\x92\xe9change d\x92informations - Partie 1: M\xe9thodologie et format | |
| Mod\xe8les des informations de la construction - Protocole d\x92\xe9change d\x92informations - Partie 2: Cadre d\x92interaction | |
| Mopeds - Methods for setting the running resistance on a chassis dynamometer AMENDMENT 1 | |
| Mopeds \x97 Methods for setting the running resistance on a chassis dynamometer | |
| Nanotechnologies - Essai de d\xe9tection d'endotoxines sur des \xe9chantillons de nanomat\xe9riaux pour des syst\xe8mes in vitro - Essai au lysat d'am\xe9bocytes de Limule (LAL) | |
| Navire et technologie maritime - Mesures pr\xe9ventives concernant l'\xe9mission et l'exposition \xe0 l'amiante lors du recyclage des navires | |
| Navires et technologie maritime - Syst\xe8mes de management de recyclage des navires - Sp\xe9cifications relatives aux syst\xe8mes de management pour les chantiers de recyclage des navires, s\xfbrs et non polluants... | |
| NEUROBEHAVIORAL EFFECTS OF SUBCHRONIC EXPOSURE OF WEANLING RATS TO TOLUENE OR HEXANE | |
| New Perspectives in Powder Metallurgy: Powder Metallurgy for Full Density Products-Volume 8 | |
| Nitric Acid for Industrial Use - Evaluation of the Nitric Acid Concentration by Measurement of Density | |
| Occupational Safety and Health Standards (Continued) | |
| OCCUPATIONAL SAFETY AND HEALTH STANDARDS FOR AGRICULTURE | |
| Occupational Safety and Health Standards | |
| Operator Interfaces of Artificial Intelligence | |
| Outils de manoeuvre pour vis et \xe9crous - Cl\xe9s m\xe2les coud\xe9es pour vis \xe0 six pans creux Rectificatif technique 1 | |
| Outils de manoeuvre pour vis et \xe9crous - Cl\xe9s m\xe2les coud\xe9es pour vis \xe0 six pans creux | |
| Oxyde d\x92aluminium principalement utilis\xe9 pour la production de l\x92aluminium - \xc9chantillonnage | |
| Oxyde d\x92aluminium principalement utilis\xe9 pour la production de l\x92aluminium - D\xe9termination d\x92un indice d\x92adsorption | |
| Packaged-Products 150 lb (68 kg) or Less | |
| Packaged-Products Over 150 lb (68 kg) | |
| Paper, board and pulps \x97 Determination of pH of salted water extracts | |
| Peintures et vernis - Anticorrosion par syst\xe8mes de peinture - \xc9valuation de la porosit\xe9 d'un feuil sec | |
| Performance Benchmarking for Artificial Intelligence Server Systems | |
| Performance Evaluation of Biometric Information: Fingerprint Recognition | |
| Petroleum products and hydrocarbon solvents - Determination of aniline and mixed aniline point | |
| Petroleum products and hydrocarbon solvents - Determination of aniline point and mixed aniline point | |
| Petroleum Waxes - Determination of Oil Content First Edition | |
| Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations | |
| Petroleum, petrochemical and natural gas industries \x97 Sectorspecific quality management systems \x97 Requirements for product and service supply organizations AMENDMENT 1: Climate action changes | |
| Photographie - Illuminant type "lampe-\xe9clair" pour photographie - D\xe9termination de l'indice de distribution spectrale (ISO/SDI) | |
| Photography - 126-Size Cartridges - Dimensions of Cartridge, Film and Backing Paper | |
| Plastics - Burning behaviour - Intermediate-scale fire-resistance testing of fibre-reinforced polymer composites | |
| Plastics - Determination of mode I plane-strain crack-arrest toughness | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens AMENDMENT 1 | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy AMENDMENT 1 | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy TECHNICAL CORRIGENDUM 1 | |
| Plastics Injection moulding of test specimens of thermoplastic materials Part 3: Small plates | |
| Plastics Injection moulding of test specimens of thermoplastic materials Part 4: Determination of moulding shrinkage | |
| Plastiques - Atmosph\xe8res normales de conditionnement et d'essai | |
| Plastiques - Compositions \xe9poxydiques - D\xe9termination de l'\xe9quivalent \xe9poxy | |
| Plastiques - Mat\xe9riaux \xe0 base de poly(chlorure de vinyle) plastifi\xe9 (PVC-P) pour moulage et extrusion - Partie 1: Syst\xe8me de d\xe9signation et base de sp\xe9cification | |
| Plastiques - Mat\xe9riaux \xe0 base de poly(chlorure de vinyle) plastifi\xe9 (PVC-P) pour moulage et extrusion - Partie 2: Pr\xe9paration des \xe9prouvettes et d\xe9termination des propri\xe9t\xe9s | |
| Plastiques - Mat\xe9riaux \xe0 base de poly(ph\xe9nyl\xe8ne \xe9ther) (PPE) pour moulage et extrusion - Partie 1: Syst\xe8me de d\xe9signation et base de sp\xe9cification | |
| Plastiques - Mat\xe9riaux \xe0 base de polyoxym\xe9thyl\xe8 ne (POM) pour moulage et extrusion - Partie 1: Syst\xe8me de d\xe9signation et base de sp\xe9cification | |
| Plastiques - Mat\xe9riaux \xe0 base de polyoxym\xe9thyl\xe8 ne (POM) pour moulage et extrusion - Partie 2: Pr\xe9paration des \xe9prouvettes et d\xe9termination des propri\xe9t\xe9s | |
| Plastiques - Moulage par compression des \xe9prouvettes en mati\xe8res thermoplastiques | |
| Plastiques - Moulage par injection des \xe9prouvettes de mat\xe9riaux thermoplastiques - Partie 1: Principes g\xe9n\xe9raux, et moulage des \xe9prouvettes \xe0 usages multiples et des barreaux AMENDEMENT 2: M\xe9thodes pour mesurer... | |
| Plastiques - Moulage par injection des \xe9prouvettes de mat\xe9riaux thermoplastiques - Partie 1: Principes g\xe9n\xe9raux, et moulage des \xe9prouvettes \xe0 usages multiples et des barreaux | |
| Plastiques - Moulage par injection des \xe9prouvettes de mat\xe9riaux thermoplastiques - Partie 2: Barreaux de traction de petites dimensions AMENDEMENT 1 | |
| Plastiques - Moulage par injection des \xe9prouvettes de mat\xe9riaux thermoplastiques - Partie 2: Barreaux de traction de petites dimensions | |
| Plastiques - Moulage par injection des \xe9prouvettes de mat\xe9riaux thermoplastiques - Partie 4: D\xe9termination du retrait au moulage RECTIFICATIF TECHNIQUE 1 | |
| Plastiques - Moulage par injection des \xe9prouvettes de mat\xe9riaux thermoplastiques - Partie 5: Pr\xe9paration d'\xe9prouvettes normalis\xe9es pour d\xe9terminer l'anisotropie | |
| Plastiques - Polystyr\xe8nes r\xe9sistants au choc (PS-I) pour moulage et extrusion - Partie 1: Syst\xe8me de d\xe9signation et base de sp\xe9cification | |
| Plastiques - Polystyr\xe8nes r\xe9sistants au choc (PS-I) pour moulage et extrusion - Partie 2: Pr\xe9paration des \xe9prouvettes et d\xe9termination des propri\xe9t\xe9s | |
| Plastiques - Vieillissement artificiel y compris les d\xe9p\xf4ts acides | |
| Plastiques \x97 Moulage par injection des \xe9prouvettes de mat\xe9riaux thermoplastiques \x97 Partie 3: Plaques de petites dimensions AMENDEMENT 1 | |
| Pneumatiques et jantes tout terrain - Pneumatiques marqu\xe9s par un symbole pour jantes \xe0 repos de talon conique \xe0 5 degr\xe9s - D\xe9signation, dimensions, marquage et coefficients de charge | |
| Politiques terminologiques - \xc9laboration et mise en \x9cuvre | |
| Potassium Hydroxide for Industrial Use - Determination of Carbon Dioxide Content - Titrimetric Method | |
| Produits isolants thermiques destin\xe9s aux applications du b\xe2timent \x97 D\xe9termination de l'absorption d'eau \xe0 court terme par immersion partielle | |
| Produits isolants thermiques destin\xe9s aux applications du b\xe2timent \x97 D\xe9termination de la masse volumique apparente | |
| Produits p\xe9troliers - Calcul de l'indice de viscosit\xe9 \xe0 partir de la viscosit\xe9 cin\xe9matique | |
| Produits p\xe9troliers - D\xe9termination de la teneur en soufre sous forme de thiols (mercaptans) dans les distillats l\xe9gers et moyens - M\xe9thode par potentiom\xe9trie | |
| Produits p\xe9troliers - D\xe9termination du point de disparition des cristaux des carburants aviation | |
| Produits p\xe9troliers - D\xe9termination du point de fum\xe9e des carbur\xe9acteurs | |
| Produits p\xe9troliers - D\xe9termination du point de trouble | |
| Produits p\xe9troliers et connexes d\x92origine naturelle ou synth\xe9tique \x97 D\xe9termination du point d'\xe9coulement | |
| Produits p\xe9troliers et p\xe9trole brut - D\xe9termination de la pression de vapeur - M\xe9thode Reid | |
| Prophylactic dams \x97 Requirements and test methods | |
| Prostheses and orthoses \x97 Factors to be considered when specifying a prosthesis for a person who has had a lower limb amputation | |
| Prostheses and orthoses \x97 Factors to be included when describing physical activity of a person who has had a lower limb amputation(s) or who has a deficiency of a lower... | |
| Prosthetics and orthotics \x97 Vocabulary \x97 Part 1: Normal gait | |
| Proth\xe8ses et orth\xe8ses - Vocabulaire - Partie 2: Marche avec proth\xe8se | |
| Proth\xe8ses et orth\xe8ses - Vocabulaire - Partie 3: Marche pathologique (\xe0 l\x92exclusion de la marche avec proth\xe8se) | |
| Qualit\xe9 de l'air - M\xe9t\xe9orologie de l'environnement - Partie 3: T\xe9l\xe9d\xe9tecti on du vent par lidar Doppler \xe0 ondes contenues bas\xe9 au sol | |
| Qualit\xe9 de l\x92air - M\xe9t\xe9orologie de l\x92environnement - Partie 2: T\xe9l\xe9d\xe9tecti on du vent par lidar Doppler puls\xe9 h\xe9t\xe9rodyne bas\xe9e sur le sol | |
| Qualit\xe9 de l\x92air \x97 M\xe9t\xe9orologie de l\x92environnement \x97 Partie 1: T\xe9l\xe9d\xe9tecti on de la port\xe9e visuelle par lidar bas\xe9e sur le sol | |
| Qualit\xe9 du sol - \xc9valuation des effets g\xe9notoxiques sur les v\xe9g\xe9taux sup\xe9rieurs - Essai des micronoyaux sur Vicia faba | |
| R\xe9ponse \xe9lectro-acoustiqu e de la cha\xeene B des salles de contr\xf4le et d\x92exploitation cin\xe9matographique - Sp\xe9cifications et mesurages | |
| Radioprotection - Sources radioactives scell\xe9es - Exigences g\xe9n\xe9rales et classification | |
| Recommended Practice for Analyzing Reliability Data for Equipment Used in Industrial and Commercial Power Systems | |
| Recommended Practice for Application of Controllers and Automation to Industrial and Commercial Power Systems | |
| Recommended Practice for Bus and Switchgear Protection in Industrial and Commercial Power Systems | |
| Recommended Practice for Collecting Data for Use in Reliability, Availability, and Maintainability Assessments of Industrial and Commercial Power Systems | |
| Recommended Practice for Conducting Harmonic Studies and Analysis of Industrial and Commercial Power Systems | |
| Recommended Practice for Conducting Load-Flow Studies and Analysis of Industrial and Commercial Power Systems | |
| Recommended Practice for Conducting Motor-Starting Studies and Analysis of Industrial and Commercial Power Systems | |
| Recommended Practice for Conducting Short-Circuit Studies and Analysis of Industrial and Commercial Power Systems | |
| Recommended Practice for Conductor Protection in Industrial and Commercial Power Systems | |
| Recommended Practice for Determining the Impact of Preventative Maintenance on the Reliability of Industrial and Commercial Power Systems | |
| Recommended Practice for Determining the Reliability of 7\xd724 Continuous Power Systems in Industrial and Commercial Facilities | |
| Recommended Practice for Electrical Safety in Industrial and Commercial Power Systems | |
| Recommended Practice for Energy Storage System Design using Second-Life Electric Vehicle Batteries | |
| Recommended Practice for Equipment Grounding and Bonding in Industrial and Commercial Power Systems | |
| Recommended Practice for Estimating the Costs of Industrial and Commercial Power Systems | |
| Recommended Practice for Evaluating the Electrical Service Requirements of Industrial and Commercial Power Systems | |
| Recommended Practice for Evaluating the Reliability of Existing Industrial and Commercial Power Systems | |
| Recommended Practice for Fire Flow Testing and Marking of Hydrants Handbook | |
| Recommended Practice for Fire Flow Testing and Marking of Hydrants | |
| Recommended Practice for Improving the Reliability of Emergency and Stand By Power Systems | |
| Recommended Practice for Medium Voltage (1.5 kV to 35 kV) DC Transformers | |
| Recommended Practice for Motor Protection in Industrial and Commercial Power Systems | |
| Recommended Practice for Overhead Transmission Line Design | |
| Recommended Practice for Privacy and Security for Federated Machine Learning | |
| Recommended Practice for System Grounding of Industrial and Commercial Power Systems | |
| Recommended Practice for the Application of Instrument Transformers in Industrial and Commercial Power Systems | |
| Recommended Practice for the Application of Low-Voltage Circuit Breakers in Industrial and Commercial Power Systems | |
| Recommended Practice for the Application of Low-Voltage Fuses in Industrial and Commercial Power Systems | |
| Recommended Practice for the Application of Power Distribution Apparatus in Industrial and Commercial Power Systems | |
| Recommended Practice for the Design of Industrial and Commercial Power Systems: Voltage Considerations | |
| Recommended Practice for the Design of Power Systems Supplying Lighting Systems in Commercial and Industrial Facilities | |
| Recommended Practice for the Instrumentation and Metering of Industrial and Commercial Power Systems | |
| Recommended Practice for the Maintenance of Industrial and Commercial Power Systems | |
| Recommended Practice for the Operation and Management of Industrial and Commercial Power Systems | |
| Recommended Practice for the Use of Probability Methods for Conducting a Reliability Analysis of Industrial and Commercial Power Systems | |
| Recommended Practice for Use and Functions of Virtual Synchronous Machines | |
| Rev\xeatements de sol textiles rectangulaires - D\xe9termination des dimensions | |
| Reverberant Room Method for Sound Testing of Fans | |
| REVERBERANT ROOM METHODS FOR SOUND TESTING OF FANS | |
| Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 4: Securing of child in child restraint system... | |
| Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems - Part 5: Installation and securing of child in a... | |
| Road vehicles - Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems \x97 Part 3: Installation of child restraint systems using vehicle... | |
| Road vehicles \x97 Methods and criteria for usability evaluation of child restraint systems and their interface with vehicle anchorage systems \x97 Part 1: Vehicles and child restraint systems equipped with... | |
| Robinetterie industrielle - Robinets d\x92isolement pour application \xe0 basses temp\xe9ratures - Partie 1: Conception, essais de fabrication et de production | |
| Robinetterie industrielle - Robinets d\x92isolement pour application \xe0 basses temp\xe9ratures - Partie 2: Essais de type | |
| Rolling Bearings - Locknuts, Wide Series, and Lockwashers with Bent Inner Tab ; (Withdrawn) | |
| Roulements - Accessoires - Partie 1: Dimensions des manchons de serrage et de d\xe9montage | |
| Roulements - Accessoires - Partie 2: Dimensions des \xe9crous \xe0 encoches et dispositifs de blocage | |
| Roulements - Cages \xe0 aiguilles axiales et rondelles de but\xe9e - Dimensions d'encombrement et tol\xe9rances | |
| Rubans auto-adh\xe9sifs - D\xe9termination des caract\xe9ristiques du pouvoir adh\xe9sif lin\xe9aire | |
| Rubans auto-adh\xe9sifs - Mesurage de la r\xe9sistance \xe0 la rupture et de l'allongement \xe0 la rupture | |
| Rubans auto-adh\xe9sifs - Mesurage du pouvoir adh\xe9sif tangentiel | |
| Rubber Hoses and Hose Assemblies for Liquefied Petroleum Gases (LPG) - Bulk Transfer Applications - Specification Second Edition | |
| Rubber Hoses for Bulk Fuel Truck Delivery - Specification | |
| Rubber, raw natural \x97 Determination of plasticity retention index (PRI) AMENDMENT 1 | |
| Rule Requirements for Materials and Welding - Part 2 | |
| Rule Requirements for Survey After Construction - Part 7 | |
| Rules for Building and Classing Offshore Installations | |
| Rules for Building and Classing Steel Vessels - Part 1 Conditions of Classification | |
| Rules for Building and Classing Steel Vessels - Part 4 Vessel Systems and Machinery | |
| SAFETY AND HEALTH REGULATIONS FOR CONSTRUCTION | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 1: Selection of test methods | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 2: Tracer gas method for the measurement of the emission rate of a given pollutant | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 4: Tracer method for the measurement of the capture efficiency of an exhaust system | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning... | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning... | |
| Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter | |
| Safety of machinery \x97 Evaluation of the emission of airborne hazardous substances \x97 Part 3: Test bench method for the measurement of the emission rate of a given pollutant | |
| Safety of machinery \x97 Evaluation of the emission of airborne hazardous substances \x97 Part 8: Room method for the measurement of the pollutant concentration parameter | |
| Safety of machinery \x97 Evaluation of the emission of airborne hazardous substances \x97 Part 9: Decontamination index | |
| Scies circulaires \xe0 tronconner les m\xe9taux \xe0 froid, monoblocs et \xe0 segments rapport\xe9s - Dimensions d\x92interchangeabil it\xe9 de l\x92entra\xeenement - Gamme de diam\xe8tres de scie, 224 \xe0 2 240 mm... | |
| Secure Computing Based on Trusted Execution Environment | |
| Sensory analysis - Methodology - Balanced incomplete block designs AMENDMENT 1 | |
| Services de formation dans le cadre de l'\xe9ducation et de la formation non formelles - Exigences de base pour les prestataires de services | |
| Services de formation en langues en dehors de l\x92\xe9ducation formelle - Exigences | |
| Services de formation fournis en dehors du cadre de l'enseignement formel - Exigences de services | |
| Ships and marine technology - Offshore wind energy - Port and marine operations | |
| Ships and marine technology - Offshore wind energy - Supply chain information flow | |
| Ships and marine technology - Ship recycling management systems - Guidelines for the implementation of ISO 30000 | |
| Ships and marine technology - Ship recycling management systems - Information control for hazardous materials in the manufacturing chain of shipbuilding and ship operations | |
| Ships and marine technology \x97 Ship recycling management systems \x97 Guidelines for selection of ship recyclers (and pro forma contract) | |
| Ships and marine technology \x97 Ship recycling management systems \x97 Requirements for bodies providing audit and certification of ship recycling management | |
| Sodium Tripolyphosphate and Sodium Pyrophosphate for Industrial Use - Determination of Orthophosphate Content - Photometric Method Using the Reduced Molybdophosphate | |
| Sodium Tripolyphosphate and Sodium Pyrophosphate for Industrial Use - Determination of Particle Size Distribution by Mechanical Sieving | |
| Software and systems engineering - Software testing - Part 1: Concepts and definitions | |
| Software and systems engineering - Software testing - Part 2: Test processes | |
| Software and systems engineering - Software testing - Part 3: Test documentation | |
| Software and systems engineering - Software testing - Part 5: Keyword-Driven Testing | |
| Software and systems engineering Software testing | |
| Software.and.systems .engineering - Software testing - Part 4: Test techniques | |
| Soil quality \x97 Guidance for burial of animal carcasses to prevent epidemics | |
| Solid mineral fuels \x97 Determination of total carbon, hydrogen and nitrogen content \x97 Instrumental method | |
| Sound for Gearmotors and In-Line Reducers and Increasers | |
| Sound Manual Section I: Fundamentals of Sound as Related to Gears; Section II: Sources, Specifications and Levels of Gear Sound; Section III: Gear-Noise Control | |
| Specifications for Concrete Construction (ACI 301-20) | |
| Specifications for Structural Concrete | |
| Standard Calculation Methods for Structural Fire Protection | |
| STANDARD FOR AN ACTIVE SHOOTER/HOSTILE EVENT RESPONSE (ASHER) PROGRAM | |
| Standard for Fire Testing of Passive Protection Materials for Use on LP-Gas Containers | |
| Standard for Tire Testing of Passive Protection Materials for Use on LP-Gas Containers | |
| Standard Method for Measuring the Shielding Effectiveness of Enclosures and Boxes Having all Dimensions between 0.1 m and 2 m | |
| Standard Method of Fire Test for Individual Fuel Packages | |
| Standard Specification for Cast-In-Place Architectural Concrete | |
| Sulfate d\x92ammonium \xe0 usage industriel - Dosage du fer - M\xe9thode photom\xe9trique au 2,2\x92-bipyridyle | |
| Sulphuric Acid and Oleums for Industrial Use - Determination of Ammoniacal Nitrogen Content - Spectrophotometric Method First Edition | |
| Sweetened Condensed Milk - Determination of Sucrose Content - Polarimetric Method | |
| Syst\xe8mes de filtration d\x92air d\x92admission pour machines tournantes - M\xe9thodes d\x92essai - Partie 1: \xc9l\xe9ments filtrants pour filtres statiques | |
| Syst\xe8mes de management de recyclage des navires - Illustrations montrant l'emplacement des mati\xe8res dangereuses \xe0 bord des navires | |
| Systems and software engineering \x97 Life cycle processes \x97 Requirements engineering | |
| Systems to manage terminology, knowledge and content \x97 TermBase eXchange (TBX) | |
| Tables de machines-outils - Rainures \xe0 T et boulons correspondants | |
| Technical product documentation \x97 Document types | |
| Technical Requirements and Evaluation Methods for Intelligent Levels of Smart Home Devices | |
| Technical Requirements for Face Recognition | |
| Telephone terminals, special telephone terminals and related auxiliary devices | |
| Television - 24-Bit Digital Audio Format for HDTV Bit-Serial Interface | |
| Television - Bit-Serial Digital Interface for High-Definition Television Systems | |
| Television - Universal Labels for Unique Identification of Digital Data | |
| Test Method for Surface Transfer Impedance of the Shielded Power Cables and Connectors for Rail Vehicles | |
| Test Procedure for Single-Degree-of-Fre edom Spring-Restrained Rate Gyros - Corrigendum 1: Table 1 Heading | |
| Textiles - D\xe9signation des tissus | |
| Textiles - D\xe9termination de la variation, dans la vapeur saturante, des dimensions des \xe9toffes | |
| Textiles - Symboles de qualification pour l'\xe9tiquetage des v\xeatements de travail destin\xe9s \xe0 \xeatre lav\xe9s de mani\xe8re industrielle | |
| Textiles - Table g\xe9n\xe9rale de conversion pour le remplacement des titres traditionnels des fils par des valeurs arrondies du syst\xe8me Tex | |
| THE OCCURRENCE AND NATURAL HISTORY OF EXPERIMENTAL SKIN TUMORS | |
| The Science of Stainless Steels Produced by Powder Metallurgy and Metal Injection Molding | |
| Thermal insulating materials for building applications - Determination of organic content AMENDMENT 1 | |
| Thermal insulating materials for building applications - Determination of organic content | |
| Thermal insulating products for building applications - Determination of behaviour under point load | |
| Thermal insulating products for building applications - Determination of deformation under specified compressive load and temperature conditions | |
| Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 degrees C/50 % relative humidity) AMENDMENT 1 | |
| Thermal insulating products for building applications - Determination of dimensional stability under constant normal laboratory conditions (23 Degrees C/50 % relative humidity) | |
| Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions AMENDMENT 1 | |
| Thermal insulating products for building applications - Determination of dimensional stability under specified temperature and humidity conditions | |
| Thermal insulating products for building applications - Determination of short-term water absorption by partial immersion AMENDMENT 1 | |
| Thermal insulating products for building applications - Determination of squareness AMENDMENT 1 | |
| Thermal insulating products for building applications - Determination of squareness | |
| Thermal insulating products for building applications - Determination of thickness | |
| Thermal insulating products for building applications \x97 Determination of compression behaviour | |
| Thermal insulating products for building applications \x97 Determination of flatness | |
| Thermal insulating products for building applications \x97 Determination of length and width | |
| Thermal insulating products for building applications \x97 Determination of linear dimensions of test specimens | |
| Thermal insulating products for building applications \x97 Determination of tensile strength parallel to faces | |
| Thermal insulating products for building applications \x97 Determination of tensile strength perpendicular to faces | |
| Thermal insulating products for building applications \x97 Determination of thickness for floating-floor insulating products | |
| Thermal insulation products for building applications - Determination of the tensile bond strength of the adhesive and of the base coat to the thermal insulation material | |
| Thermal insulation products for building applications \x97 Determination of the mechanical properties of glass fibre meshes | |
| Thermal insulation products for building applications \x97 Determination of the resistance to impact of external thermal insulation composite systems (ETICS) | |
| TRANSIENT COGNITIVE DEFICITS AND HIGH-FREQUENCY HEARING LOSS IN WEANLING RATS EXPOSED TO TOLUENE | |
| Transmissions hydrauliques - \xc9l\xe9ments filtrants - V\xe9rification de la compatibilit\xe9 des mat\xe9riaux avec les fluides | |
| Transmissions hydrauliques - Dimensions et code d'identification des flasques de montage et des bouts d'arbres des pompes volum\xe9triques et moteurs - Partie 1: Conversion en unit\xe9s m\xe9triques de la s\xe9rie... | |
| Transmissions hydrauliques - Dimensions et code d'identification des flasques de montage et des bouts d'arbres des pompes volum\xe9triques et moteurs - Partie 2: S\xe9rie m\xe9trique | |
| Transmissions hydrauliques et pneumatiques - Pressions nominales | |
| Tuyaux en caoutchouc et en plastique - M\xe9thodes d'exposition \xe0 des sources lumineuses de laboratoire - D\xe9termination du changement de coloration, d'aspect et d'autres propri\xe9t\xe9s physiques | |
| UL Outline for Investigation Unmanned Aerial Vehicles | |
| UL Standard for Safety Antifreeze Solutions for Use in Fire Sprinkler Systems | |
| UL Standard for Safety Clinical Internet of Things (IoT) Data and Device Interoperability with TIPPSS\x97Trust, Identity, Privacy, Protection, Safety, and Security | |
| UL Standard for Safety Commercial-Industria l Gas Burners | |
| UL Standard for Safety Cord-and-Plug-Connec ted Health Care Facility Outlet Assemblies | |
| UL Standard for Safety Dry Chemical Fire Extinguishers | |
| UL Standard for Safety Power Over Ethernet (PoE) Power Sources for Access Control Systems and Equipment | |
| UL Standard for Safety Software Cybersecurity for Network-Connectable Products, Part 1: General Requirements | |
| UL Standard for Safety Software Cybersecurity for Network-Connectable Products, Part 2-1: Particular Requirements for Network Connectable Components of Healthcare and Wellness Systems | |
| UL Standard for Safety Standard Method for Testing and Assessing Particle and Chemical Emissions from 3D Printers | |
| UL Standard for Safety Technical Panel for Software Cybersecurity for Network-Connectable Products | |
| UL Standard for Safety Unmanned Aircraft Systems | |
| UL Standard for Safety Waste Oil-Burning Air-Heating Appliances | |
| V\xe9hicules routiers - Protection ext\xe9rieure des voitures particuli\xe8res | |
| VALVE and EXPULSION TYPE LIGHTNING ARRESTERS | |
| Verification for level pressure sound meters | |
| Viandes et produits \xe0 base de viande - D\xe9termination de la teneur en nitrites (M\xe9thode de r\xe9f\xe9rence) | |
| Water quality \x97 Determination of total nitrogen after UV digestion \x97 Method using flow analysis (CFA and FIA) and spectrometric detection | |
| Water quality \x97 The variability of test results and the uncertainty of measurement of microbiological enumeration methods | |
| Whey Cheese - Determination of Dry Matter Content (Reference Method) First Edition | |
| Workplace air \x97 Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry |
| << Prev | Next >> |