Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1200
1250
1300
1350
1400
1450
1460
1470
1480
1490
1500
1510
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1530
1540
1550
1560
1570
1580
1600
1620
| Product Name | Notes |
|---|---|
| 1983 Exchange Access Study: Analog Voice and Voiceband Characterization of the Exchange Access Plant | |
| 1997 ASHRAE TRANSACTIONS - VOLUME 103 - PART 2 | |
| 2009 ASHRAE TRANSACTIONS VOLUME 115 PART 1 | |
| 2009 ASHRAE TRANSACTIONS VOLUME 115 PART 2 | |
| 2010 ASHRAE TRANSACTIONS VOLUME 116 PART 1 | |
| 2010 ASHRAE TRANSACTIONS VOLUME 116 PART 2 | |
| 2011 ASHRAE TRANSACTIONS VOLUME 117 PART 1 | |
| 2011 ASHRAE TRANSACTIONS VOLUME 117, PART 2 | |
| 2012 ASHRAE TRANSACTIONS - VOLUME 118, PART 2 | |
| 2012 ASHRAE TRANSACTIONS VOLUME 118, PART 1 | |
| 2025 ASHRAE TRANSACTIONS - Volume 131 - PART 1 | |
| 2025 ASHRAE TRANSACTIONS - Volume 131 - PART 2 | |
| 7.5 KHZ Digital Program Terminal or Channel Unit Requirements and Objectives | |
| 96 Channel Digital Paired-Cable Transmission System Requirements and Objectives | |
| A Framework for Defining Service Conditions and Identifying Related Hazards and Hazard Mitigation of Actuators and Their Accessories | |
| A guideline for determining the acoustic properties of auditory signals used in consumer products - A database of domestic sounds | |
| Aciers et fontes - Vue d\x92ensemble des m\xe9thodes d\x92analyse disponibles | |
| Advanced Intelligent Network Adjunct Generic Requirements | |
| Advanced Intelligent Network OS-Adjunct Generic Requirements | |
| Aerospace series Acceptance of supplier\x92s design capabilities and management of design organisation authorisations | |
| Aerospace Series Aerospace Material Specification - Pyrometry | |
| Aerospace series Assessment of design suppliers managing and approving repairs | |
| Aerospace series Declarable Substances Recommended Practice | |
| Aerospace series Flammability Test Organisations Qualification Standard | |
| Aerospace Series Guidelines for Software Quality Management | |
| Aerospace series Quality systems Specific quality requirements for NATO suppliers | |
| Aerospace series Substance declaration | |
| Aerospace series Test organisations \x97 General requirements for test process and capabilities | |
| AFS Transactions 2018 Volume 126 | |
| Alpine Skis - Guidelines for Conducting Slope Performance Tests First Edition | |
| Anodizing of Aluminium and Its Alloys - Determination of Colour and Colour Difference of Coloured Anodic Coatings First Edition | |
| Application of risk management for IT-networks incorporating medical devices - Application guidance - Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to selfassess their conformance with IEC 80001-1... | |
| Application of risk management for it-networks incorporating medical devices - Part 2-9: Application guidance \x96 Guidance for use of security assurance cases to demonstrate confidence in IEC TR 80001-2-2 security... | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-1: Step-by-step risk management of medical IT-networks \x96 Practical applications and examples | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-2: Guidance for the disclosure and communication of medical device security needs, risks and controls | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-3: Guidance for wireless networks | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-4: Application guidance \x96 General implementation guidance for healthcare delivery organizations | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-5: Application guidance \x96 Guidance on distributed alarm systems | |
| Application of risk management for IT-networks incorporating medical devices \x96 Part 2-8: Application guidance \x96 Guidance on standards for establishing the security capabilities identified in IEC TR 80001-2-2 | |
| Applications of Refractory Lining Materials | |
| Artificial Insemination of Animals - Frozen Semen of Breeding Bulls - Enumeration of Living Aerobic Micro-Organisms First Edition | |
| Artificial intelligence (AI) \x96 Assessment of the robustness of neural networks Part 1: Overview | |
| Artificial intelligence \x96 Functional safety system and AI systems | |
| ASTM C704 Test Variability Reduced to Allow Further Optimization of Erosion-resistant Refractories for Critical Oil Refining Applications | |
| Asynchronous Digital Multiplexes, Requirements and Objectives | |
| Automated Digital Terminal System (ADTS) Requirements and Objectives | |
| Automatic Call Distributor/Manageme nt Information System: Interface Between 1/1AESS Switch Central Office and Customer Premises Equipment | |
| Automatic Message Accounting (AMA) for Public Packet Switched Networks | |
| Automation systems and integration - Applications integration approach using information exchange requirements modelling and software capability profiling | |
| Banking - Personal Identification Number (PIN) management and security - Part 4: Guidelines for PIN handling in open networks | |
| Bases for Design of Structures - Temperature Climatic Actions (PNS 1096:1992) | |
| Bellcore-STD-100 and Bellcore-STD-200 Inspection Resource Allocation Plans | |
| Below Ground Repeater Enclosures | |
| Broadband ISDN User to Network Interface and Network Node Interface Physical Layer Generic Criteria | |
| Building Construction - Modular Coordination - Application of Horizontal Multimodules | |
| Building Construction - Modular Coordination - System of Preferred Numbers Defining Multimodular Sizes First Edition | |
| Building Construction - Needs of Disabled People in Buildings - Design Guidelines First Edition | |
| Cable Pressurization - Flow Transducers | |
| Cable Pressurization Pipe Panels and Distribution Panels | |
| Cable Pressurization Pressure Transducer Housings | |
| Cable Pressurization--Air Feeder Pipe | |
| Cable Sheath Repair | |
| Call Assembly Requirements for the 2ESS Switch Automatic Message Accounting Transmitter (AMAT) | |
| Centrex Data Link Interface Between 1/1AESS Switch and Customer Premises Equipment | |
| Circuit Access Point Data | |
| Color Microforms | |
| Common Generic Requirements for Channel Switching in ISDN | |
| Common Language Infrastructure (CLI) Technical Report: Information Derived from Partition IV XML File | |
| Compatibility Information for Feature Group A Switched Access Service | |
| Compatibility Information for Feature Group B Switched Access Service | |
| Comprehensive Report of API Crude Oil Characterization Measurements | |
| Constant Sound Power Fan Curves for Small Air-moving Devices | |
| Continuous Mechanical Handling Equipment - Safety Code for Belt Conveyors - Examples for Protection of Pinch Points on Idlers | |
| Conventional Distributing Frame System | |
| Corporate Telecommunication Networks \x96 Mobility for Enterprise Communications | |
| Corrosion of metals and alloys \x97 Exposure test results in the Asian Monsoon region | |
| Criticality Classification Guideline for Instrumentation | |
| Crude Petroleum Oil - Transfer Accountability - Method for Estimation on Ships of Total Quantity Remaining on Board (ROB) First Edition | |
| Crushed stone powder for concrete | |
| Customer Traffic Report Feature: Interface Between 1/1A ESS and Customer Premises Equipment | |
| Cybersecurity Related to the Safety Lifecycle | |
| D\xe9gradation en environnement des textiles utilis\xe9s dans les \xe9quipements de retenue du fret a\xe9rien | |
| Data book of vertical lifting platforms for safety and fuctional operation | |
| Data Jack (Miniature 8 Pin) | |
| Data on span of similar colors of low vision | |
| Data on the age-related changes of visual field size for detection | |
| Datapath Network Access Interface Specification | |
| Description of the Bellcore UNIX(R) Standard Operating Environment | |
| Description of the Interface Between 1/1A or 2/2B ESS(TM) Switching Equipment and a Non-Data-Linked Centrex/ESSX Attendant Position System | |
| Design, Fabrication, Operational Effects, Inspection, Assessment, and Repair of Coke Drums and Peripheral Components in Delayed Coking Units | |
| Differences in Risk Perception: How Clean is Clean? | |
| Digital Channel Bank Dual-Tone Multifrequency (DTMF) Code Select Signaling Channel Unit | |
| Digital Channel Bank Low Speed Signaling Channel Units Generic Requirements | |
| Digital Cross-Connect System (DSC 1/0) Generic Criteria | |
| Direct reduced iron - Determination of carbon and/or sulfur - Highfrequency combustion method with infrared measurement | |
| Distributing Frame Interfaces | |
| Distributing Frames | |
| Documentation - ISO Bibliographic Filing Rules (International Standard Bibliographic Filing Rules) - Exemplification of Bibliographic Filing Principles in a Model Set of Rules First Edition | |
| Drop Wire Splice for Single Pair Aerial Drop Wire | |
| Earth-Moving Machinery - Warning Devices for Slow-Moving Machines - Ultrasonic and Other Systems | |
| Effects of current on human beings and livestock - Part 1: General aspects | |
| Effects of current on human beings and livestock - Part 3: Effects of currents passing through the body of livestock | |
| Effects of current on human beings and livestock - Part 4: Effects of lightning strokes on human beings and livestock | |
| Effects of current passing through the human body Part 2: Specail aspects | |
| Electrically propelled road vehicles - Vocabulary | |
| Electromagnetic compatibility (EMC) - Guide to the drafting of electromagnetic compatibility publications | |
| Electromagnetic compatibility (EMC) Part 2: Environment - Section 4: Compatibility levels in industrial plants for low-frequency conducted disturbances | |
| Electromagnetic compatibility (EMC) Part 4: Testing and measurement techniques - Section 15: Flickermerter - Functional and design specifications | |
| Electromagnetic compatibility (EMC), Part 1.4: General - Historical rationale for the limitation of power-frequency conducted harmonic current emissions from equipment, in the frequency range up to 2 kHz | |
| Electromagnetic compatibility (EMC), Part 2.6: Environment - Assessment of the emission levels in the power supply of industrial plants as regards low frequency conducted disturbance | |
| Electromagnetic compatibility (EMC), Part 3.13: Limits - Assessment of emission limits for the connection of unbalanced installations to MV, HV and EHV power systems | |
| Electromagnetic compatibility (EMC), Part 3.6: Limits - Assessment of emission limits for the connection of distorting installations to MV, HV and EHV power systems | |
| Electromagnetic compatibility (EMC), Part 3.7: Limits - Assessment of emission limits for the connection of fluctuating installations to MV, HV and EHV power systems | |
| Electrostatic Discharge Control in the Manufacture of Telecommunications Equipment | |
| Emergency Restoration Facilities for Electronic Equipment Enclosures | |
| Engins de manutention continue - Code de s\xe9curit\xe9 des transporteurs \xe0 vis - Exemples de protection des points de coincement et de cisaillement | |
| Enterprise-Control System Integration - TR01: Master Data Profile Template | |
| Environmental management - Integrating environmental aspects into product design and development | |
| Ergonomics of human-system interaction - Part 308: Surface-conduction electron-emitter displays (SED) | |
| Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays | |
| Ergonomics of human-system interaction \x97 Part 100: Introduction to standards related to software ergonomics | |
| Ergonomics of human-system interaction \x97 Part 309: Organic light-emitting diode (OLED) displays | |
| Ergonomics of human-system interaction \x97 Part 310: Visibility, aesthetics and ergonomics of pixel defects | |
| Ergonomics of human-system interaction \x97 Part 311: Application of ISO 9241-307: LCD screens for workstations | |
| Ergonomics of human-system interaction \x97 Part 312: Readability of electrophoretic displays | |
| Ergonomics of human-system interaction \x97 Part 313: Optical measurement methods for reflective displays | |
| Ergonomics of human-system interaction \x97 Part 380: Survey result of HMD (Head-Mounted Displays) characteristics related to human-system interaction | |
| Ergonomics of human-system interaction \x97 Part 393: Structured literature review of visually induced motion sickness during watching electronic images | |
| Ergonomics of human-system interaction \x97 Part 514: Guidance for the application of anthropometric data in the ISO 9241- 500 series | |
| Ergonomics of human-system interaction \x97 Part 610: Impact of light and lighting on users of interactive systems | |
| Ergonomics of human-system interaction \x97 Part 810: Robotic, intelligent and autonomous systems | |
| Estimated Transmission Performance Switched Access Service Feature Group-D | |
| Evaluating the Effectiveness of Hearing Conservation Programs through Audiometric Data Base Analysis | |
| Examination methods of cultured epithelial cell sheets for corneal epithelial diseases | |
| Example Implementation of ANSI/ISA-84.00.01-20 04 | |
| Explanatory Notes on ISO 281/1-1977 | |
| Fabrication Considerations for Vanadium-Modified Cr-Mo Steel Heavy Wall Pressure Vessels | |
| Feasibility of Chlorine Detection Instrument Testing | |
| Fiber optic communication system design guides - Calculating dispersion penalty from measured time-resolved chirp data | |
| Fire safety on lifts \x97 Part 10: Comparison of safety standards worldwide on lifts used by firefighters and for building evacuation | |
| Fire-Resistance Tests - Elements of Building Construction - Part 3: Commentary on Test Method and Test Data Application | |
| Fire-resistance tests \x97 Elements of building construction \x97 Part 2: Guidance on measuring uniformity of furnace exposure on test samples | |
| Functional Criteria - Public Telephone Mounting Accessories | |
| Gas engine driven Congeneration unit (200 kW class) | |
| General waste and sewage sludge etc. melt-solidified products derived aggregate for road construction (Molten slag aggregate for road construction) | |
| Generic Automated Loop Test Systems | |
| Generic Criteria for Base Exchange Radio Systems | |
| Generic Criteria for Optical Fiber Identifiers | |
| Generic Logging Requirements for the X.75\xb4 Clearing Subnetwork Identification (CSI) Utility | |
| Generic Requirements for 24-, 48-, 130- and 140-Volt Central Office Power Plant Control and Distribution Equipment | |
| Generic Requirements for 88MH Load Coil Cases | |
| Generic Requirements for Aerial Cable Terminals | |
| Generic Requirements for Building Entrance Terminals | |
| Generic Requirements for Cable Entrance Splice Closures for Copper Cable | |
| Generic Requirements for Cable Placing Lubricants | |
| Generic Requirements for Cable Shield Bonding Clamps | |
| Generic Requirements for Cleaning Solvents for Outside Plant Use | |
| Generic Requirements for Corrosion Washes | |
| Generic Requirements for Enhanced SS7 Message Trapping Capabilities | |
| Generic Requirements for Exchange Access Frame Relay PVC Service | |
| Generic Requirements for Fiber Optic Cable Locators | |
| Generic Requirements for Fiber Optic Visual Fault Finders | |
| Generic Requirements for Frame Relay PVC Exchange Service | |
| Generic Requirements for Hand-Held Optical Power Meters | |
| Generic Requirements for Hybrid Microcircuits Used in Telecommunications Equipment | |
| Generic Requirements for Improved CCS Trouble Reporting | |
| Generic Requirements for Insulation Displacement Connector (IDC) Cross-Connect Terminal Blocks | |
| Generic Requirements for ISDN Automatic Recall | |
| Generic Requirements for ISDN Basic Access Digital Subscriber Lines | |
| Generic Requirements for ISDN Basic Rate Interface Verification (BRIV) | |
| Generic Requirements for ISDN Display for Call Control and Selected Services | |
| Generic Requirements for ISDN Selective Call Forwarding (I-SCF) | |
| Generic Requirements for Lashed Cable Supports | |
| Generic Requirements For Link Facility Fault Sectionalization Utilizing Digital Signal Zero (DS0) Interface For Common Channel Signaling (CCS) Networks | |
| Generic Requirements for Longitudinal Radio Frequency Interference Filters | |
| Generic Requirements for Low Speed SMDS Access | |
| Generic Requirements for Manual Digital Signal Cross-Connect Frames DSX-3 | |
| Generic Requirements for Manual Link Set Blocking Controls Supporting Node and Network Isolation Actions at Common Channel Signaling (CCS) Network Nodes | |
| Generic Requirements for Metallic Cable Resistance Fault Locator Tests Sets | |
| Generic Requirements for Metallic Time Domain Reflectometry Test Sets | |
| Generic Requirements for Modular Connecting Blocks | |
| Generic Requirements for Multiple-Pair Aerial Service Wire | |
| Generic Requirements for Network Plenum Cable/Wire | |
| Generic Requirements for Network Shielded Station Wire | |
| Generic Requirements for Network Two Pair Station Wire | |
| Generic Requirements for One-Pair Aerial Service Wire | |
| Generic Requirements for Optical and Optical/Metallic Buried Service Cable | |
| Generic Requirements for Outside Plant Bonding and Grounding Systems Hardware | |
| Generic Requirements for PADSX Frames Using Concentrated Test Access | |
| Generic Requirements for Public Telephone Dual-Tone Multifrequency Dial (DTMF) | |
| Generic Requirements for Public Telephone Handsets | |
| Generic Requirements for Rack-Mountable Fuse Panels Used in Central Offices | |
| Generic Requirements for Re-Enterable Encapsulants | |
| Generic Requirements for Self-Supporting Optical Fiber Cable | |
| Generic Requirements for Service Wire Splice for Buried Service Wire | |
| Generic Requirements for Single Pair Buried Distribution Wire | |
| Generic Requirements for Steam-Resistant Cables | |
| Generic Requirements for Surge Protected Terminal Blocks | |
| Generic Requirements for Surge Protective Devices (SPDs) on AC Power Circuits | |
| Generic Requirements for the Craftsperson\xb4s Handset | |
| Generic Requirements for the Second Generation of Automatic Message Accounting Teleprocessing Systems (AMATPS) | |
| Generic Requirements for the Switched DS1/Switched Fractional DS1 Service Capability From an ISDN Interface (SWF-DS1/ISDN) | |
| Generic Requirements for Unprotected Terminal Blocks | |
| Generic Requirements for Wire Connectors | |
| Generic System Requirements in Support of Switched Multi-Megabit Data Service | |
| Guidance for Application of Wireless Sensor Technology to Non-SIS Independent Protection Layers | |
| Guidance for Testing of Process Sector Safety Instrumented Functions (SIF) Implemented as or within Safety Instrumented Systems (SIS) | |
| Guidance on the Evaluation of Fire, Combustible Gas and Toxic Gas System Effectiveness | |
| Guidance on the Identification of Safety Instrumented Functions (SIF) in Burner Management Systems (BMS) | |
| Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots - Part 1: Acceptance sampling | |
| Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots \x97 Part 2: Sampling by attributes | |
| Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots \x97 Part 3: Sampling by variables | |
| Guide for Assessment of Human Exposure to Electromagnetic Fields from Multimedia Products in accordance with IEC/EN 62311 | |
| Guide for Elevator Seismic Design | |
| Guide for the Selection of an Acceptance Sampling System, Scheme or Plan for Inspection of Discrete Items in Lots | |
| Guide for Toxic Gas Detection as a Method of Personnel Protection | |
| Guidelines for the Implementation of ANSI/ISA-84.00.01-20 04 | |
| Guidelines for the Presentation of International Standards Dealing with the Design of Structures | |
| Guidelines for the Use of ISO 5167-1: 1991 | |
| Hand protection \x97 Guidance for selection and use | |
| Hardware Attachments for Steel and Concrete Telephone Poles | |
| Health informatics \x97 Sex and gender in electronic health records | |
| Hydrometry \x97 Measurement of free surface flow in closed conduits | |
| Impact of Hydrogen Embrittlement on Minimum Pressurization Temperature for Thick-wall Cr-Mo Steel Reactors in High-pressure H2 Service-Initial Technical Basis for RP 934-F | |
| Implants chirurgicaux - Usage des termes \xabvalgus\xbb et \xabvarus\xbb en chirurgie orthop\xe9dique | |
| Implants for Surgery - Partial and Total Hip Joint Prostheses - Guidance for Laboratory Evaluation of Change of Form of Bearing Surfaces First Edition | |
| Implants for Surgery - Partial and Total Hip Joint Prostheses - Recommendations for Simulators for Evaluation of Hip Joint Prostheses | |
| In vivo evaluation method for structure of articular cartilage using diffusion tensor MRI | |
| In-Situ Proof Testing of Automated Valves | |
| Industrial communication networks - Fieldbus specifications - Part 1: Overview and guidance for the IEC 61158 and IEC 61784 series | |
| Information and documentation \x97 Issues and considerations for managing records in structured data environments | |
| Information Processing - Computer-Assisted Publishing - Vocabulary First Edition | |
| Information Processing Systems - Concepts and Terminology for the Conceptual Scheme and the Information Base | |
| Information Processing Systems - Open Systems Interconnection - Service Conventions | |
| Information technology \x96 Artificial intelligence (AI) \x96 Bias in AI systems and AI aided decision making | |
| Information technology \x96 Artificial intelligence \x96 Overview of computational approaches for AI systems | |
| Information technology \x96 Artificial intelligence \x96 Overview of ethical and societal concerns | |
| Information technology \x96 Artificial intelligence \x96 Overview of machine learning computing devices | |
| Information technology \x96 Artificial intelligence \x96 Overview of trustworthiness in artificial intelligence | |
| Information technology \x96 Cloud computing \x96 Audit of cloud services | |
| Inspection, Assessment, and Repair of Coke Drums and Peripheral Components in Delayed Coking Units | |
| Inspection, Assessment, and Repair of Heavy Wall Reactor Vessels in High-temperature High-pressure Hydrogen Service | |
| Insulation coordination for equipment within low-voltage system - Part 2-1: Application guide-Explanation of the application of the IEC 60664 series, dimensioning examples and dielectric testing | |
| Intelligent transport systems - Basic information for cooperative systems related vehicle / roadway warning and control | |
| Interface Between Loop Carrier Systems and Loop Testing Systems | |
| Interface Between Miscellaneous Control Functions of Customer Premises Equipment and 1/1A ESS Centrex Switching Systems | |
| InterLATA Dial Pulsing Requirements | |
| International Responsibilities: Are We Our Brothers' Keeper? | |
| ISDN Basic Access Transport System Requirements | |
| ISDN Calling Number Identification Services for Primary Rate Interfaces | |
| ISDN Parameter Downloading Generic Requirements | |
| ISDN Primary Rate Access Transport System Requirements | |
| ISDN Primary Rate Interface Call Control Switching and Signaling Generic Requirements for Class II Equipment | |
| ISDN Routing and Digit Analysis (Revision 1 Interfiled) | |
| ISDN Unregistered Dial-Out Service Generic Requirements | |
| Isolated Ground Planes: Definition and Application to Telephone Central Offices | |
| JPEG File Interchange Format (JFIF) | |
| Judging Oil Spill Response Performance: the Challenge of Competing Perspectives | |
| Light and lighting \x96 Energy performance of lighting in buildings Explanation and justification of ISO/CIE 20086 | |
| Light Gauge Metal Containers - Round Vent-Hole Cans with Soldered Ends for Milk and Milk Products - Capacities and Related Diameters | |
| Liquid Flow Measurement in Open Channels - Velocity-Area Method Using a Restricted Number of Verticals | |
| Liquid Flow Measurements in Open Channels - Stage-Fall-Discharge Relations First Edition | |
| Literature Review of Fracture Mechanics\x96based Experimental Data for Internal Hydrogen-assisted Cracking of Vanadium-modified 2\xbcCr-1Mo Steel | |
| LMOS/MLT-1 Compatible Interface Requirements for a Loop Test System | |
| Local Access System Generic Requirements, Objectives, and Interfaces in Support of Switched Multi-Megabit Data Service | |
| Loudspeaker Paging Equipment: Interface Between a 1/1A and 2/2B ESS Centrex Office and Customer Premises Equipment | |
| Machine and Unit States: An Implementation Example of ISA-88 | |
| Machine Interface Codes for Voice Grade Switched Exchange Access Service | |
| Machine tools -- Practical guidance and example of risk assessment on electro-discharge machines | |
| Machine tools -- Practical guidance and example of risk assessment on stationary grinding machines | |
| Mat\xe9riel d\x92irrigation - Syst\xe8mes d\x92irrigation automatiques - R\xe9gulation hydraulique | |
| Material, Fabrication, and Repair Considerations for Austenitic Alloys Subject to Embrittlement and Cracking in High Temperature 565 \xb0C to 760 \xb0C (1050 \xb0F to 1400 \xb0F) Refinery Services | |
| Materials, Fabrication, and Repair Considerations for Hydrogen Reformer Furnace Outlet Pigtails and Manifolds | |
| Measurement of Free Surface Flow in Closed Conduits - Part 1: Methods | |
| Measurement of Free Surface Flow in Closed Conduits - Part 2: Equipment First Edition | |
| Measurement of Liquid Flow in Open Channels - Determination of the Wetline Correction | |
| Measurement of Liquid Flow in Open Channels - General Guidelines for Selection of Method | |
| Measurement of Liquid Flow in Open Channels - Measurement in Meandering Rivers and in Streams with Unstable Boundaries | |
| Measurement of Liquid Flow in Open Channels - Methods for Measurement of Bedload Discharge | |
| Mechanized Remittance/Payment Advice Interface | |
| Medical device software - Part 2: Validation of software for medical device quality systems | |
| Medical device software \x96 Part 1: Guidance on the application of ISO 14971 to medical device software | |
| Medical device software \x96 Part 3: Process reference model of medical device software life cycle processes (IEC 62304) | |
| Medical devices -- Guidance on the application of JIS T 14971 | |
| Melt-solidified fine aggregate for concrete derived from municipal solid waste and sewage sludge (Molten slag fine aggregate for concrete) | |
| Methylation analyses of the p16 gene in mesenchymal stem cells | |
| Microstructure des fontes - Partie 2: Classification du graphite par analyse d'image | |
| Microstructure of cast irons - Part 3: Matrix structures | |
| Mining - Guidance on Methods of Verifying Dimensions of Sprocket Assemblies for Chain Conveyors First Edition | |
| Modular Distributing Frame Framework | |
| Modular Distributing Frame System | |
| Monolithic Refractories: Installation and Dryout | |
| Monolithic Refractories: Manufacture, Properties, and Selection | |
| Multiswitch Business Group Structure for Conventional or ISDN Access Generic Requirements | |
| Music On Hold Equipment: Interface Between a 1/1A ESS Centrex and Customer Premises Equipment | |
| MYTHS AND REALITIES OF OIL SPILL PLANNING AND RESPONSE: THE CHALLENGES OF A LARGE SPILL | |
| Network Interface Description for National ISDN-1 Customer Access | |
| Network Interface for Nonregistered Voice Band Analog Private Line Services | |
| Network User Identification (NUI) Capabilities Requirements | |
| Nickel and Nickel Alloys - Rules for Material Description Based on Chemical Symbols | |
| Node Measurements Requirements for the Generation of the CCS NSPMP | |
| Objectives for the Maintenance User Interface of Switching Systems and Transport Systems | |
| Ophthalmic Instruments - Tonometers | |
| Ophthalmic optics - Spectacle lenses - Parameters affecting lens power measurement | |
| Optical amplifers - Distributed Raman amplificaion | |
| Optical amplifiers - General information - Polarization mode dispersion parameter | |
| Optical amplifiers - Semiconductor optical amplifiers (SOAs) | |
| Optical Cable Placing Winches | |
| OSSGR Section 10.12: IWSS/OSS Switch Interface | |
| OSSGR Section 22.4: Listing Services Database | |
| OSSGR Section 22.5: Intercept Database | |
| OSSGR Section 22.6: Operator Reference Database | |
| OSSGR Section 26: Real-Time Rating | |
| OSSGR Section 7: Transmission | |
| OSSGR Section 9: Maintenance | |
| OSSGR Sections 11 Through 20: Miscellaneous | |
| OTGR Section 10.1: User System Interface User System Access | |
| OTGR Section 11.1: Generic Operations Interface - Non-OSI Communications Architecture | |
| OTGR Section 11.3: Generic Operations Interface - Embedded Operations Channels | |
| OTGR Section 11.4: Generic Operations Interface Operations Interworking | |
| OTGR Section 12.5: Network Element and Network System Security Administration Messages | |
| Packaging - Estimating the Filled Volume Using the Flat Dimensions - Part 1: Paper Sacks | |
| Paints and Varnishes - Determination of the Ability of Liquid Paints to Sustain Combustion | |
| Partial Stroke Testing of Automated Block Valves | |
| Parts 1-5, Safety Instrumented Functions (SIF) Safety Integrity Level (SIL) Evaluation Techniques Package | |
| Petroleum Liquids - Automatic Pipeline Sampling - Statistical Assessment of Performance of Automatic Samplers Determining the Water Content in Hydrocarbon Liquids | |
| Plain Bearings - Evaluation of the Tribological Properties of Polymer-Based Materials First Edition | |
| Plain Bearings - Testing of the Tribological Behaviour of Bearing Materials for Oil Lubrication Application - Running-In Under Mixed Lubrication Conditions | |
| Plastics - Basic Materials for Polyurethanes - Determination of the Amounts of 2,4- and 2,6-Isomers in Toluenediisocyanate by Infrared Spectroscopy | |
| Plastics - Determination of the thermal properties in between room temperature and decomposition and/or vaporization temperature | |
| Plastics - Phenolic Resins - Basis for Classification | |
| Plug-In Carbon Block Protector Units for Use in Central Office Connectors and Building Entrance Terminals | |
| Plugged Cable Stubs | |
| Portable Chain-Saws - Automatic Chain Brake and Cutting Equipment - Operator's Safety Test | |
| Possible Recipe Procedure Presentation Formats | |
| PPSN Asynchronous Interface Generic Requirements | |
| Practical Thermal Properties of Building Materials and Products | |
| Preparation of Steel Substrates Before Application of Paints and Related Products - Tests for the Assessment of Surface Cleanliness - Part 1: Field Test for Soluble Iron Corrosion Products | |
| Pressure Contactors for Repeater Cases | |
| Priority Processing of Surveillance Messages at CCS Nodes Under Overload | |
| Processeurs de langage de programmation - M\xe9thodes d\x92essai - Lignes directrices pour leur \xe9laboration et acceptabilit\xe9 | |
| Program Document Microfiche Requirements | |
| Programmable controllers - Part 4: User guidelines | |
| Prophylaxis and Therapy Against Chemical Agents | |
| Protection of electronic devices from electrostatic phenomena - Part 1: General requirements | |
| Protection of electronic devices from electrostatic phenomena - Part 2: User guide | |
| Public Telephone Mountings | |
| Pulp Bonded PASP Cable | |
| Pulp Bonded STALPETH Cable | |
| Pulp Bonded Steam Resistant Cable | |
| Putting Dispersants to Work: Overcoming Obstacles | |
| QUALITY MANAGEMENT SYSTEMS \x97 GUIDELINES FOR THE APPLICATION OF ISO 9001:2015 | |
| Radio Paging Equipment: Interface Between 1/1A and 2/2B ESS(TM) Centrex Offices and Customer Premises Equipment | |
| Railway infrastructure \x97 Rail mounted construction, maintenance and inspection machines \x97 Explanation of machine type | |
| Railway infrastructure \x97 Track quality evaluation \x97 Chord-based method | |
| Rationale for Withdrawing ANSI/ASA S12.9-2008/Part 6 | |
| Raw Tobacco - Determination of Chlorophyll Residues Content (Green Index) | |
| Reaction-to-Fire Tests - Full-Scale Room Tests for Surface Products - Part 2: Technical Background and Guidance | |
| Recommended Design Factors and Design Coefficients for Thermoplastic Pressure Pipe | |
| Recorded Telephone Dictation Equipment: Interface Between 1/1A and 2/2B ESS Centrex Offices and Customer Premises Equipment | |
| Refractory Insulating Castables with Permanent Linear Change Anomaly\x97Case Study | |
| Repeater Housings for T1, T1C, T1D, and T1G Carrier Systems | |
| Risk management of particulate contamination for devices with intravascular access | |
| Road Vehicles - Anthropomorphic Side Impact Dummy - Lateral Impact Response Requirements to Assess the Biofidelity of the Dummy | |
| Road Vehicles - Anthropomorphic Side Impact Dummy - Part 1: Lateral Head Impact Response Requirements to Assess Biofidelity of Dummy First Edition | |
| Road Vehicles - Anthropomorphic Side Impact Dummy - Part 2 - Lateral Neck Impact Response Requirements to Assess Biofidelity of Dummy | |
| Road Vehicles - Anthropomorphic Side Impact Dummy - Part 3: Lateral Thoracic Impact Response Requirements to Assess Biofidelity of Dummy First Edition | |
| Road Vehicles - Anthropomorphic Side Impact Dummy - Part 4: Lateral Shoulder Impact Response Requirements to Assess Biofidelity of Dummy | |
| Road Vehicles - Anthropomorphic Side Impact Dummy - Part 5: Lateral Abdominal Impact Response Requirements to Assess Biofidelity of Dummy | |
| Road Vehicles - Anthropomorphic Side Impact Dummy - Part 6: Lateral Pelvic Impact Response Requirements to Assess Biofidelity of Dummy | |
| Road Vehicles - Comparison Tables of Regulations on Photometric Requirements of Light Signalling Devices First Edition | |
| Road Vehicles - Driver Hand-Control Reach - In-Vehicle Checking Procedure | |
| Road Vehicles - Flashers - Functional Allocation of Terminals | |
| Road Vehicles - High-Friction Test Track Surface - Specifications First Edition | |
| Road Vehicles - Instructions for the Implementation of the Assignment of World Manufacturer Identifier (WMI) Codes for Vehicle Identification Number (VIN) Systems and for World Parts Manufacturer Identifier (WPMI) Codes... | |
| Road Vehicles - Measurement of Road Surface Friction | |
| Road Vehicles - Transient Open-Loop Response Test Method with One Period of Sinusoidal Input | |
| Road Vehicles - Transient Open-Loop Response Test Method with Pseudo-Random Steering Input First Edition | |
| Road vehicles \x97 Application of predictive maintenance to hardware with ISO 26262-5 | |
| Road vehicles \x97 Functional safety \x97 Application to generic rechargeable energy storage systems for new energy vehicle | |
| Rolling Bearings - Measuring and Gauging Principles and Methods | |
| Rubber and Plastics - Glossary of Terms Used by the Hose Industry First Edition | |
| Rubber and Rubber Products - Determination of Accuracy and Bias of Chemical Test Methods First Edition | |
| Rubber and Rubber Products - Determination of Precision for Test Method Standards First Edition | |
| Rubber Compounding Ingredients - Carbon Black - Determination of Individual Pellet Crushing Strength First Edition | |
| Rubber Hoses and Hose Assemblies for Underground Mining - Textile-Reinforced Air and Water Type | |
| Rubber Insulating Blankets | |
| Rubber Insulating Gloves | |
| Rubber, Vulcanized - Classification - Rubber Materials First Edition | |
| Rubber- or Plastics-Covered Rollers - Glossary | |
| S\xe9curit\xe9 des jouets - Partie 8: Lignes directrices pour la d\xe9termination de l\x92\xe2ge | |
| S\xe9rie a\xe9rospatiale Sp\xe9cification des mat\xe9riaux a\xe9rospatiaux \x97 Pyrom\xe9trie | |
| Safety Fieldbus Design Considerations for Process Industry Sector Applications | |
| Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 1: Introduction | |
| Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 2: Determining the SIL of a SIF via Simplified Equations | |
| Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 3: Determining the SIL of a SIF via Fault Tree Analysis | |
| Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 4: Determining the SIL of a SIF via Markov Analysis | |
| Safety Instrumented Functions (SIF) - Safety Integrity Level (SIL) Evaluation Techniques Part 5: Determining the PFD of SIS Logic Solvers via Markov Analysis | |
| Safety Integrity Level (SIL) Verification of Safety Instrumented Functions | |
| Safety of machinery - Electro-sensitive protective equipment - Part 4: Particular requirements for equipment using vision based protective devices | |
| Safety of machinery - Guidelines for the use of communication systems in safety-related applications | |
| Safety of machinery -- Relationship with JIS B 9700 -- Part 4: Guidance to machinery manufacturers for consideration of related IT-security (cyber security) aspects | |
| Safety of machinery -- Security aspects related to functional safety of safety-related control systems | |
| Safety of toys - Part 9: Safety aspects related to mechanical and physical properties - Comparison of ISO 8124-1, EN 71-1, and ASTM F963 | |
| Safety requirements for lifts (elevators) - Part 24: Convergence of lift requirements | |
| Security Countermeasures Related to Safety Instrumented Systems (SIS) | |
| Security Technologies for Manufacturing and Control Systems | |
| Service Control Point Node Generic Requirements For IN1 | |
| Ships and marine technology \x97 Good practices of preventing capsizing during turning of ships with large profile height | |
| Signaling Transfer Point, Stored Program Controlled Switch, and Service Control Point Node Generic Requirements to Support Node Restart | |
| Skill Standards for Control System Technicians | |
| SMDS Generic Criteria on Operations Interface - Information Model Supporting Intercarrier SMDS | |
| SMDS Generic Criteria on Operations Interfaces -- SMDS Information Model and Usage | |
| SMDS Operations Technology Network Element Generic Requirements | |
| Solar Energy - Field Pyranometers - Recommended Practice for Use | |
| SONET Regenerator (SONET RGTR) Equipment Generic Criteria | |
| Splitters used for Line Splitting and Line Sharing Applications | |
| Statistical Process Control Program Generic Requirements | |
| Stored Program Control for Switching Systems: Software Documentation Standards | |
| Stress Corrosion Cracking of Carbon Steel in Fuel Grade Ethanol: Review and Survey | |
| Subcritical Cracking of Modern 2\xbcCr-1Mo-\xbcV Steel Due to Dissolved Internal Hydrogen and H2 Environment, Research Report | |
| Supplier Data - Basic Generic Requirements | |
| Surface Active Agents - Scientific Classification | |
| Surface chemical analysis - X-ray photoelectron spectroscopy - Procedures for determining backgrounds | |
| Switching System Overload Control Generic Requirements | |
| Switching System Requirements Supporting ISDN Access Using the ISDN User Part | |
| Synchronous DS3 Add-Drop Multiplex (ADM 3/X) Requirements and Objectives | |
| Systems Engineering Requirements for the 1ESS Switch Automatic Message Account Transmitter (AMAT) | |
| Technical Drawings - Installations - Graphical Symbols for Automatic Control First Edition | |
| Technical Report No. 80 Data Integrity Management System for Pharmaceutical Laboratories | |
| Technical Report No. 81 Cell-Based Therapy Control Strategy | |
| Technical Report No. 82 Low Endotoxin Recovery | |
| Technical Report No. 83 Virus Contamination in Biomanufacturing: Risk Mitigation, Preparedness, and Response | |
| Technical Report No. 84 Integrating Data Integrity Requirements into Manufacturing & Packaging Operations | |
| Technical Report No. 85 Enhanced Test Methods for Visible Particle Detection and Enumeration on Elastomeric Closures and Glass Containers | |
| Technical Report No. 86 Industry Challenges and Current Technologies for Pharmaceutical Package Integrity Testing | |
| Technical Report No. 87 Current Best Practices for Pharmaceutical Glass Vial Handling and Processing | |
| Technical Report No. 88 Microbial Data Deviation Investigations in the Pharmaceutical Industry | |
| Technical Report No. 89 Strategies for Vaccine Development and Lifecycle Management | |
| Technical Report No. 90 Contamination Control Strategy Development in Pharmaceutical Manufacturing | |
| Technical Report No. 91 Post-Approval Change Management and Implementation for Biologics and Pharmaceutical Drug Products \x97 A User\x92s Guide | |
| Technical Report on the Materials and Fabrication Issues of 11/4Cr-1/2Mo and 1Cr-1/2Mo Steel Pressure Vessels | |
| Technical Report: Prevention through Design - A Life Cycle Approach to Safety and Health in the Construction Industry | |
| Technical Reports - An Investigation into the Applicability of Wireless Sensor Networks for Condition Monitoring | |
| Technical Reports - Busbar Protection - Standby Numeric Protection System as an Alternative to UKBP/TP162 Contingency Options | |
| Technical Reports - Effectiveness of National Grid Transco Cable Cooling Systems | |
| Technical Reports - Over-Voltage Protection in Substations Using Surge Arresters | |
| Technical Reports - Re-Verification of the Short-Circuit Capability of the 275kV OBR60 and OBR60/72E Circuit-Breaker Designs | |
| Technical Reports - Review of Drain Earth Shorting Schemes (DrESS) Applied In Accordance With NSI4 Review of Drain Earth Shorting Schemes (DrESS) Applied In Accordance With NSI4 | |
| Technical Reports - Review of The Potential Effects of Wind Turbine Wakes On Overhead Transmission Lines | |
| Technical Reports - Thermal Capability of 132 kV to 400 kV Earth Switches | |
| Technology Roadmap for Bauxite Residue Treatment and Utilization | |
| Telecommunications Fuses | |
| Textile Floor Coverings - Assessment of Changes in Appearance First Edition | |
| Textiles - Conception des v\xeatements pour la r\xe9duction des risques de feu | |
| Textiles - Twist Factor Related to the Tex System First Edition | |
| The Bellcore OSCA(TM) Architecture | |
| The Effects of Hydrogen for Establishing a Minimum Pressurization Temperature (MPT) for Heavy Wall Steel Reactor Vessels - Data Sheet | |
| The Effects of Hydrogen for Establishing a Minimum Pressurization Temperature (MPT) for Heavy Wall Steel Reactor Vessels | |
| The Quality Measurement Plan (QMP) | |
| THE TECHNICAL BASIS DOCUMENT FOR API RP 941 | |
| Thermal Expansion Under Load and Creep of Refractories\x97An Evaluation and Comparison of Testing Methods | |
| Thermal-Insulation Materials - Application Categories and Basic Requirements - Guidelines for the Harmonization of International Standards and Other Specifications | |
| Thermoplastics Pipes for Industrial Applications Under Pressure - Determination of the Chemical Resistance Factor and of the Basic Stress - Part 2: Pipes Made of Halogenated Polymers First Edition | |
| Thermoplastics Pipes for the Transport of Fluids - Methods of Extrapolation of Hydrostatic Stress Rupture Data to Determine the Log-Term Hydrostatic Strength of Thermoplastics Pipe Materials | |
| Tone Generator Test Sets | |
| Toxicity Testing of Fire Effluents - Part 1: General First Edition; (Corrected and Reprinted - 1989) | |
| Toxicity Testing of Fire Effluents - Part 2: Guidelines for Biological Assays to Determine the Acute Inhalation Toxicity of Fire Effluents (Basic Principles, Criteria and Methodology) | |
| Toxicity Testing of Fire Effluents - Part 3: Methods for the Analysis of Gases and Vapours in Fire Effluents | |
| Toxicity Testing of Fire Effluents - Part 4: the Fire Model (Furnaces and Combustion Apparatus Used in Small-Scale Testing) | |
| Toxicity Testing of Fire Effluents - Part 5: Prediction of Toxic Effects of Fire Effluents First Edition | |
| Toxicity Testing of Fire Effluents - Part 6: Guidance for Regulators and Specifiers on the Assessment of Toxic Hazard in Fires in Buildings and Transport | |
| Trace Elements in Soils and Plants | |
| Tractors and Self- Propelled Machines for Agriculture and Forestry - Test Method for Performance of Air-Conditioning System | |
| Tragbare Leitern fuer die Feuerwehr nach DIN EN 1147 - Beiblatt 1: Klappleiter, Hakenleiter, Schiebleiter, Steckleiter, Einsteckteil, Steckleiter-Verbindu ngsteil, Multifunktionsleiter | |
| TRAINING MANUAL ON FIRE ALARM SYSTEMS | |
| Transportation and the Economy - National and State Perspectives | |
| Treatment of Cancer | |
| TREATMENT WETLANDS FOR THE PETROLEUM INDUSTRY | |
| Trends in Mechanical Alloying | |
| Trial-Use Standard-Adoption of ISO/IEC TR 15026-1:2010 Systems and Software Engineering-Systems and Software Assurance-Part 1: Concepts and Vocabulary | |
| TRIM THE DOOR COMPLETE ANSI/BHMA STANDARDS DEALING WITH TRIMMING THE DOOR ***CONTAINS ANSI A156.6, ANSI A156.9, ANSI A156,11, ANSI A156.16, ANSI A156.21 AND ANSI A156.22*** | |
| TRIMETHYLAMINE CAS # 75-50-3 ORAL RISK ASSESSMENT DOCUMENT | |
| Troubleshooting Process Plant Control | |
| TUNGSTEN, REFRACTORY & HARDMETALS VI CONFERENCE PROCEEDINGS | |
| TUNGSTEN, REFRACTORY & HARDMETALS VII CONFERENCE PROCEEDINGS | |
| Universal Digital Channel (UDC) Generic Requirements and Objectives | |
| Usage Measurement Generic Requirements in Support of Billing for Switched Multi-Megabit Data Service | |
| Use of 9Cr-1Mo-V (Grade 91) Steel in the Oil Refining Industry | |
| Use of Duplex Stainless Steels in Hydroprocessing Reactor Effluent Air Coolers (REACs) | |
| Use of Duplex Stainless Steels in the Oil Refining Industry | |
| Using ISA-88 and ISA-95 Together | |
| Using Variable Angle Tribometers (VAT) for Measurement of the Slip Resistance of Walkway Surfaces | |
| V\xe9hicules routiers - Mesure des \xe9missions de fum\xe9e des moteurs \xe0 allumage par compression (diesel) - \xc9tude sur les essais simplifi\xe9s en service | |
| Voice Grade Special Access Service - Transmission Parameter Limits and Interface Combinations | |
| Wideband and Broadband Digital Cross-Connect Systems Generic Criteria | |
| Wood Utility Poles - Generic Requirements | |
| X.25 Call Redirection and Call Deflection Generic Requirements |
| << Prev | Next >> |