Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1050
1100
1150
1200
1250
1260
1270
1280
1290
1300
1310
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1340
1350
1360
1370
1380
1390
1400
1450
1500
1550
1600
1620
| Product Name | Notes |
|---|---|
| (RESTRICTED) CROSSDECK OPERATIONS TECHNICAL SUPPLEMENT: NATIONAL AIRCRAFT DATA | |
| (RESTRICTED) CROSSDECK OPERATIONS TECHNICAL SUPPLEMENT: NATIONAL PROCEDURES AND SHIP DATA | |
| (RESTRICTED) GLIDE SLOPE INDICATORS FOR HELICOPTER OPERATIONS FROM SHIPS | |
| (RESTRICTED) MARITIME OPERATIONS INVOLVING HELICOPTERS TAKEN UP FROM TRADE (HTUFT) | |
| (RESTRICTED) MULTINATIONAL MARITIME VOICE REPORTING PROCEDURES | |
| (RESTRICTED) SHIP/AIRCRAFT INTEROPERABILITY MATRIX AND ADVANCE INFORMATION | |
| (RESTRICTED) STANDARDIZED DECK MARKINGS FOR THROUGH-DECK AND AIRCRAFT CARRIER FLIGHT DECKS | |
| (RESTRICTED) SUBMARINE TRANSFER PROCEDURES | |
| (RESTRICTED) VERTICAL REPLENISHMENT (VERTREP) OPERATING AREA MARKING, CLEARANCES, AND LIGHTING | |
| ADAPTER - AIR TURBINE STARTER TO ENGINE, MOUNTING | |
| Adapter, Air Turbine Starter to Engine, Mounting | |
| ADAPTER, CABLE CLAMP TO CONNECTOR, SERIES I AND II | |
| ADAPTER-HYDRAULIC STARTER TO ENGINE, MOUNTING | |
| ADAPTER. HYDRAULIC STARTER TO ENGINE, MOUNTING | |
| ADDENDUM 1 TO MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 12- CALCULATION OF PETROLEUM QUANTITIES | |
| API Manual of Petroleum Measurement Standards Chapter 17.11 EI Hydrocarbon Management HM 52 Measurement and sampling of cargoes on board tank vessels using closed and restricted equipment | |
| API Manual of Petroleum Measurement Standards Chapter 17.12 - EI Hydrocarbon Management HM 51 | |
| API Manual of Petroleum Measurement Standards Chapter 22.7 EI HM 77 Testing Protocol for Multiphase Meter | |
| Asphalt Cold Mix Manual | |
| Asphalt in Hydraulics | |
| BALL - CORROSION RESISTANT STEEL, PRECISION GRADE | |
| BEARING, PLAIN, SELF-LOCKING, SELF-LUBRICATING, LOW SPEED, NARROW, GROOVED OUTER RING, -65 TO + 325 DEG. F | |
| BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, NARROW CHAMFERED OUTER RING, -65 DEG. TO +325 DEG. F | |
| BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE CHAMFERED OUTER RING, -65 DEG. F TO +325 DEG. F | |
| BEARING, PLAIN, SELF-LUBRICATING, SELF-ALIGNING, LOW SPEED, WIDE GROOVED OUTER RING, -65 DEG. TO +325 DEG. F | |
| BEARINGS, PLAIN, SELF-LOCKING, SELF-LUBRICATING, LOW SPEED, NARROW, GROOVED OUTER RING, -65 TO +325 \xbaF | |
| BINDER SET ONLY FOR MANUAL OF PETROLEUM MEASUREMENT STANDARDS | |
| BINDERS FOR ONLY THE MANUAL OF PETROLEUM MEASUREMENT STANDARDS | |
| Characterization of Radiofrequency (RF) Coil Heating in Magnetic Resonance Imaging Systems | |
| CIRCUIT BREAKER - AIRCRAFT, TRIP-FREE, PUSH-PULL, 25 THRU 35 AMPS TYPE I--55 TO PLUS 121 DEGREES CENTRIGRADE | |
| CLAMP LOOP TYPE SUPPORT (HEAT RESISTANT) .204 HOLE | |
| CLAUSES, STANDARD, FOR USE IN MANUFACTURING STANDARDS | |
| COIL, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE (IRON CORE) TYPES LT10K158 TO LT10K168 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, MICROMINIATURE, (IRON CORE) TYPES LT10K128 TO LT10K137 | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE (IRON CORE) TYPES LT10K138 TO LT10K142 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE (IRON CORE) TYPES LT10K143 TO LTI0K147 INCL., GENERAL SPECIFICATION FOR | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE (IRON CORE) TYPES, GENERAL SPECIFICATION FOR | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE (IRON CORE), TYPES LT10K143 TO LTI0K147 INCL | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K097 TO LT10K107 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K097 TO LT10K107 INCLUSIVE | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K108 TO LT10K112 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K108 TO LT10K112 INCLUSIVE | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K118 TO LT10K122 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K118 TO LT10K122 INCLUSIVE | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K138 TO LT10K142 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K138 TO LT10K142 INCLUSIVE | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K143 TO LT10K147 INCL | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K148 TO LT10K152 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K148 TO LT10K152 INCLUSIVE | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K153 TO LT10K157 INCL. | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K153 TO LT10K157 INCLUSIVE | |
| COILS, RADIO FREQUENCY, MOLDED, FIXED, SUBMINIATURE, (IRON CORE), TYPES LT10K158 TO LT10K168 INCL. | |
| Common Planning and Operating Considerations for Cross-Deck Operations with Armed Rotary Wing Aircraft | |
| CONNECTOR, RECEPTACLE, ELECTRIC GROUNDING | |
| CONNECTOR, RECTANGULAR, ELECTRICAL RACK AND PANEL 7 SIZE 22 SOLDER SOCKET CONTACTS | |
| CONTACTS, ELECTRICAL CONNECTOR, SHIELDED CABLE APPLICATIONS, SIZE 8 | |
| Continuous On-line Measurement of Water Content in Petroleum (Crude Oil and Condensate) | |
| Determination of Gradient-Induced Electric Fields In Diagnostic Magnetic Resonance Imaging Published by: National Electrical | |
| DETERMINATION OF LOCAL SPECIFIC ABSORPTION RATE (SAR) IN DIAGNOSTIC MAGNETIC RESONANCE IMAGING | |
| Determination of Signal-to-Noise Ratio (SNR) in Diagnostic Magnetic Resonance Images | |
| DOCUMENTATION FILE FOR API MPMS C19 S1 - EVAPORATIVE LOSS FROM FIXED ROOF TANKS | |
| DOOR, FACE MOUNTED | |
| EVAPORATION LOSS FROM LOW-PRESSURE TANKS | |
| FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING ELECTRONIC EQUIPMENT | |
| FASTENER, POSITIVE SELF-LOCKING CASE MOUNTING, ELECTRONIC EQUIPMENT (WITH HOLDING CLAMP) | |
| FLANGE, AIR TURBINE STARTER MOUNTING | |
| FLANGE, HYDRAULIC STARTER MOUNTING | |
| GENERAL CONTACT LAYOUT FOR TYPE III BASE PLATE CONNECTOR (.200 GRID) | |
| General Guidelines for Developing Testing Protocols for Devices Used in the Measurement of Hydrocarbon Fluids | |
| Generator, Engine Accessory D.C. 28-Volt 40-Amp | |
| GENERATOR, ENGINE ACCESSORY, D.C., 28-VOLT, 40-AMP | |
| Gravity Reduction to 60 Degrees Fahrenheit - Volume Reduction Factors Extrapolated | |
| GRID PATTERNS FOR SOLDERLESS WRAPPED ELECTRICAL CONNECTORS | |
| Guidelines for Voyage Analysis and Reconciliation of Cargo Quantities- Data Sheet | |
| GYROSCOPE, DISPLACEMENT, ROLL AND PITCH (HARD MOUNTED) | |
| Healthcare Hazard Control and Safety Management | |
| HELICOPTER OPERATIONS FROM SHIPS OTHER THAN AIRCRAFT CARRIERS (HOSTAC) (MARITIME VSTOL DATA INCLUDED) | |
| INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL 7 (SIZE 16 AND 20 CRIMP REMOVABLE) PIN CONTACTS | |
| INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL 7 (SIZE 16 AND 20 CRIMP REMOVABLE) SOCKET CONTACTS | |
| INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL 9 (SIZE 16 AND 20 CRIMP REMOVABLE) SOCKET CONTACTS | |
| INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 26 (SIZE 16 AND 20 CRIMP REMOVABLE) PIN CONTACTS | |
| INSERT (INSULATOR), RECTANGULAR CONNECTOR, ELECTRICAL, 26(SIZE 16 AND 20 CRIMP REMOVABLE) SOCKET CONTACTS | |
| INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SIZE 28, CLASS L, 40 AMPS | |
| INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SIZE 44, CLASS L, 100 AMPS | |
| INSERT ARRANGEMENTS, ELECTRICAL CONNECTOR, SIZE 52, CLASS L, 200 AMPS | |
| INSERT, CRES HELICAL COIL COARSE THREAD, 1 DIA, NOMINAL LENGTH | |
| INSERT, CRES HELICAL COIL FINE THREAD, 1-1/2 DIA NOMINAL LENGTH | |
| INSERT, CRES HELICAL, COIL FINE THREAD 1 DIA. NOMINAL LENGTH | |
| INSERT, CRES HELICAL, COIL FINE THREAD 2 DIA. NOMINAL LENGTH | |
| LOCK, VALVE SPRING RETAINER: ENGINE | |
| Lubricants, Industrial Oils and Related Products - Type X (Greases) - Specification | |
| Lubricants, Industrial Oils and Related Products Type M (Metal Removal Fluids) Specification | |
| Lubricants, Industrial Oils, and Related Products - Classification | |
| Lubricants, Industrial Oils, and Related Products Type A Lubricant for General Purpose and Total Loss Systems -- Specification | |
| Lubricants, Industrial Oils, and Related Products Type C (Gears) Specification | |
| Lubricants, Industrial Oils, and Related Products Type D Compressor Oils Specification - Addendum | |
| Lubricants, Industrial Oils, and Related Products Type D Compressor OilsSpecification | |
| Lubricants, Industrial Oils, and Related Products Type F Lubricant for Spindle Bearings, and Associated Clutches -- Specification | |
| Lubricants, Industrial Oils, and Related Products Type G Slideway Lubricants - Specification | |
| Lubricants, Industrial Oils, and Related Products Type H (Hydrualic Fluids) - Specification | |
| Lubricants, Industrial Oils, and Related Products Type HF Fire-Resistant Hydraulic Fluids - Specification | |
| Lubricants, Industrial Oils, and Related Products Type P Pneumatic Tool Oils -- Specification | |
| Lubricants, Industrial Oils, and Related Products Type T Turbine Oils -- Specification | |
| Manual de Est\xe1ndares de Medici\xf3n de Petr\xf3leo Cap\xedtulo 20.2 Directrices para la Inspecci\xf3n Previa a la Carga de Tanques de Carga del Buque y sus Sistemas de Manipulaci\xf3n de Cargamentos... | |
| Manual de Est\xe1ndares de Medici\xf3n de Petr\xf3leo Cap\xedtulo 4\x97Sistemas de Prueba Secci\xf3n 9\x97M\xe9todos de Calibraci\xf3n para Probadores de Desplazamiento y Tanques Probadores Volum\xe9tricos Parte 2\x97Determinaci\xf3 n del Volumen de Probadores... | |
| Manual de Est\xe1ndares de Medici\xf3n de Petr\xf3leo Cap\xedtulo 7.5 Determinaci\xf3n de Temperatura\x97Medic i\xf3n Autom\xe1tica de la Temperatura de Tanques a Bordo de Buques que Transportan Hidrocarburos Refrigerados y Fluidos Qu\xedmicos... | |
| Manual de Est\xe1ndares de Medici\xf3n del Petr\xf3leo Cap\xedtulo 17 Mediciones Mar\xedtimas Secci\xf3n 4 M\xe9todo para Cuantificaci\xf3n de Vol\xfamenes Peque\xf1os en Buques. (OBQ/ROB) | |
| Manual of Petroleum Measurement Standard Chapter 2 - Tank Calibration Section 2A - Measurement and Calibration of Upright Cylindrical Tanks by the Manual Tank Strapping Method | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 4 PROVING SYSTEMS | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS - CHAPTER 6 - METERING ASSEMBLIES SECTION 2 - LOADING RACK METERING SYSTEMS | |
| Manual of Petroleum Measurement Standards Chapter 1 - Vocabulary | |
| Manual of Petroleum Measurement Standards Chapter 11.2.1 and 11.2.1M; Chapter 11.2.3 and 11.2.3M; Computer Tape Information and Documentation | |
| Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 3 - Concentric, Square-Edged Orifice Meters Part 4 - Background, Development, Implementation Proc. and Subroutine Doc. | |
| Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 4 - Converting Mass of Natural Gas Liquids and Vapors to Equivalent Liquid Volumes | |
| Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 6 - Continuous Density Measurement Second Edition | |
| Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 6 - Continuous Density Measurement | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 14 - NATURAL GAS FLUIDS MEASUREMENT SECTION 7 - MASS MEASUREMENT OF NATURAL GAS LIQUIDS AND OTHER HYDROCARBONS | |
| Manual of Petroleum Measurement Standards Chapter 14 - Natural Gas Fluids Measurement Section 8 - Liquefied Petroleum Gas Measurement (R 1996) | |
| Manual of Petroleum Measurement Standards Chapter 14-Natural Gas Fluids Measurement Section 5-Calculation of Gross Heating Value, Specific Gravity, and Compressibility of Natural Gas Mixtures from Compositional Analysis | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 15 - GUIDELINES FOR THE USE OF PETROLEUM INDUSTRY-SPECIFIC INTERNATIONAL SYSTEM (SI) UNITS | |
| Manual of Petroleum Measurement Standards Chapter 15 Section 1 Metric Practice Guide A Guide to the Use of SI-The International Systems of Units | |
| Manual of Petroleum Measurement Standards Chapter 15-Metrication Section 2-Conversion of Operational and Process Measurement Units to the Metric (SI) System | |
| Manual of Petroleum Measurement Standards Chapter 16 - Measurement of Hydrocarbon Fluids by Weight or Mass Section 2 - Mass Measurement of Liquid Hydrocarbons in Vertical Cylindrical Storage Tanks by... | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement - Section 2 - Measurement of Cargoes on Board Tank Vessels; First Edition | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2 - Measurement of Cargoes on Board Tank Vessels | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 2A - Closed and Restricted Systems | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 3 - Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 5 - Guidelines for Cargo Analysis and Reconciliation | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 6 - Guidelines for Determining the Fullness of Pipelines between Vessels and Shore Tanks | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 7 - Recommended Practices for Developing Barge Control Factors (Volume Ratio) | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 8 - Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks | |
| Manual of Petroleum Measurement Standards Chapter 17 - Marine Measurement Section 9Vessel Experience Factor (VEF) IP Hydrocarbon Management HM 49 | |
| Manual of Petroleum Measurement Standards Chapter 17 El Hydrocarbon Management HM 49 Marine Measurement Section 9 - Vessel Experience Factor (VEF); First Edition | |
| Manual of Petroleum Measurement Standards Chapter 17-Marine Measurement Section 3-Guidelines for Identification of the Source of Free Waters Associated with Marine Petroleum Cargo Movements | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17.1 GUIDELINES FOR MARINE CARGO INSPECTION | |
| Manual of Petroleum Measurement Standards Chapter 17.10 Measurement of Cargoes on Board Marine Gas Carriers Part 1-Liquefied Natural Gas | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17.10 MEASUREMENT OF CARGOES ON BOARD MARINE GAS CARRIERS PART 2 - LIQUEFIED PETROLEUM AND CHEMICAL GASES EL HYDROCARBON MANAGEMENT HM 55 | |
| Manual of Petroleum Measurement Standards Chapter 17.14.1 Measurement of Bulk Cargoes by Draft Survey\x97Ocean-goin g Vessels | |
| Manual of Petroleum Measurement Standards Chapter 17.14.2 Measurement of Bulk Cargoes by Draft Survey\x97Inland Barges | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 17.4 - METHOD FOR QUANTIFICATION OF SMALL VOLUMES ON MARINE VESSELS (OBQ/ROB) | |
| Manual of Petroleum Measurement Standards Chapter 17.5 - El Hydrocarbon Management - HM 64 - Guidelines for Voyage Analysis and Reconciliation of Cargo Quantities; Second Edition | |
| Manual of Petroleum Measurement Standards Chapter 17.6 Guidelines for Determining the Fullness of Pipelines Between Marine Vessels and Shore Facilities | |
| Manual of Petroleum Measurement Standards Chapter 17.6 Guidelines for Determining the Fullness of Pipelines Between Vessels and Shore Tanks | |
| Manual of Petroleum Measurement Standards Chapter 17\x97Marine Measurement Section 1\x97Guidelines for Marine Cargo Inspection | |
| Manual of Petroleum Measurement Standards Chapter 17\x97Marine Measurement Section 8\x97Guidelines for Pre-Loading Inspection of Marine Vessel Cargo Tanks | |
| Manual of Petroleum Measurement Standards Chapter 18 - Custody Transfer Section 1 - Measurement Procedures for Crude Oil Gathered From Small Tanks by Truck | |
| Manual of Petroleum Measurement Standards Chapter 18.2 Custody Transfer of Crude Oil from Lease Tanks Using Alternative Measurement Methods | |
| Manual of Petroleum Measurement Standards Chapter 19 - Evaporative Loss Measurement; Section 2 - Evaporative Loss from Floating-Roof Tanks | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 19.1 EVAPORATIVE LOSS FROM FIXED-ROOF TANKS | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part A - Wind Tunnel Test Method for the Measurement of Deck-Fitting Loss Factors for External Floating-Roof Tanks | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part B - Air Concentration Test Method - Rim-Seal Loss Factors for Floating-Roof Tanks | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part C - Weight Loss Test Method for the Measurement of Rim-Seal Loss Factors for Internal Floating-Roof Tanks | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part D - Fugitive Emission Test Method for the Measurement of Deck-Seam Loss Factors for Internal Floating-Roof Tanks | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part E - Weight Loss Test Method for the Measurement of Deck-Fitting Loss Factors for Internal Floating-Roof Tanks | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part F - Evaporative Loss Factor for Storage Tanks Certification Program | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part G - Certified Loss Factor Testing Laboratory Registration | |
| Manual of Petroleum Measurement Standards Chapter 19.3 - Evaporative Loss Measurement Part H - Tank Seals and Fittings Certification - Administration | |
| Manual of Petroleum Measurement Standards Chapter 19.4 - Recommended Practice for Speciation of Evaporative Losses | |
| Manual of Petroleum Measurement Standards Chapter 19.6 Part 1-Evaporative Loss from Storage Tank Floating-roof Landings | |
| Manual of Petroleum Measurement Standards Chapter 19.6.2 Evaporative Loss from the Cleaning of Storage Tanks | |
| Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2B - Calibration of Upright Cylindrical Tanks Using the Optical Reference Line Method First Edition | |
| Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 2C - Calibration of Upright Cylindrical Tanks Using the Optical-Triangulatio n Method | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 2 - TANK CALIBRATION SECTION 7 - CALIBRATION OF BARGE TANKS | |
| Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8A - Calibration of Tanks on Ships and Oceangoing Barges | |
| Manual of Petroleum Measurement Standards Chapter 2 - Tank Calibration Section 8B - Recommended Practice for the Establishment of the Location of the Reference Gauge Point and the Gauge Height... | |
| Manual of Petroleum Measurement Standards Chapter 2 Tank Calibration Section 2D Calibration of Upright Cylindrical Tanks Using the Internal Electrooptical Distance Ranging Method | |
| Manual of Petroleum Measurement Standards Chapter 2.2G Calibration of Upright Cylindrical Tanks Using the Total Station Reference Line Method | |
| Manual of Petroleum Measurement Standards Chapter 2.4 Measurement and Calibration of Tank Cars | |
| Manual of Petroleum Measurement Standards Chapter 20 - Allocation Measurement Section 1 - Allocation Measurement | |
| Manual of Petroleum Measurement Standards Chapter 20.2 Production Allocation Measurement Using Single-phase Devices | |
| Manual of Petroleum Measurement Standards Chapter 20.3 Measurement of Multiphase Flow | |
| Manual of Petroleum Measurement Standards Chapter 20.5 Recommended Practice for Application of Production Well Testing in Measurement and Allocation | |
| Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 2 - Electronic Liquid Volume Measurement Using Positive Displacement and Turbine Meters | |
| Manual of Petroleum Measurement Standards Chapter 21 - Flow Measurement Using Electronic Metering Systems Section 2 - Flow Measurement using Electronic Metering Systems, Inferred Mass | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 21.1 FLOW MEASUREMENT USING ELECTRONIC METERING SYSTEMS - ELECTRONIC GAS MEASUREMENT | |
| Manual of Petroleum Measurement Standards Chapter 22.5 Testing Protocols\x97Flow Computational Device | |
| Manual of Petroleum Measurement Standards Chapter 22.6 Testing Protocol for Gas Chromatographs | |
| Manual of Petroleum Measurement Standards Chapter 22Testing Protocol Section 2Differential Pressure Flow Measurement Devices | |
| Manual of Petroleum Measurement Standards Chapter 23.1 Reconciliation of Liquid Pipeline Quantities | |
| Manual of Petroleum Measurement Standards Chapter 23.2 Reconciliation of Liquid Tank Car(s) Quantities | |
| Manual of Petroleum Measurement Standards Chapter 23.2, Reconciliation of Liquid Tank Car(s) Quantities | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 1B - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 2 - Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars; First Edition | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 2 - Standard Practice for Gauging Petroleum and Petroleum Products in Tank Cars | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 3 - Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Pressurized Storage Tanks by Automatic Tank Gauging... | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging Section 4 - Standard Practice for Level Measurement of Liquid Hydrocarbons on Marine Vessels by Automatic Tank Gauging | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 5 - Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging | |
| Manual of Petroleum Measurement Standards Chapter 3 - Tank Gauging; Section 6 - Meaurement of Liquid Hydrocarbons by Hybrid Tank Measurement Systems | |
| Manual of Petroleum Measurement Standards Chapter 3-Tank Gauging - Section 1B-Standard Practice for Level Measurement of Liquid Hydrocarbons in Stationary Tanks by Automatic Tank Gauging | |
| Manual of Petroleum Measurement Standards Chapter 3-Tank Gauging Section 5-Standard Practice for Level Measurement of Light Hydrocarbon Liquids Onboard Marine Vessels by Automatic Tank Gauging | |
| Manual of Petroleum Measurement Standards Chapter 3.1A - Standard Practice for the Manual Gauging of Petroleum and Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 1 - Introduction | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Displacement Provers | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 2 - Pipe Provers (Provers Accumulating at Least 10,000 Pulses) | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 3 - Small Volume Provers | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 4 - Tank Provers (API STD 1101, 2531, 2533, 2534) (R 1993) First Edition | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 5 - Master-Meter Provers | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 6 - Pulse Interpolation | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 7 - Field - Standard Test Measures (API STD 1101, 2531, 2533, 2534) (R 1993) First Edition | |
| Manual of Petroleum Measurement Standards Chapter 4 - Proving Systems Section 8 - Operation of Proving Systems | |
| Manual of Petroleum Measurement Standards Chapter 4-Proving Systems Section 9-Methods of Calibration for Displacement and Volumetric Tank Provers Part 3\x97Determination of the Volume of Displacement Provers by the Master Meter... | |
| Manual of Petroleum Measurement Standards Chapter 4.5 Master Meter Provers | |
| Manual of Petroleum Measurement Standards Chapter 4.8 Operation of Proving Systems | |
| Manual of Petroleum Measurement Standards Chapter 4\x97Proving Systems Section 6\x97Pulse Interpolation | |
| Manual of Petroleum Measurement Standards Chapter 4\x97Proving Systems Section 9\x97Methods of Calibration for Displacement and Volumetric Tank Provers Part 3\x97Determination of the Volume of Displacement Provers by the Master Meter... | |
| Manual of Petroleum Measurement Standards Chapter 4\x97Proving Systems Section 9\x97Methods of Calibration for Displacement and Volumetric Tank Provers Part 4\x97Determination of the Volume of Displacement and Tank Provers by the... | |
| Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and 1Introduction to the Determination of the Volume of Displacement and Tank Provers | |
| Manual of Petroleum Measurement Standards Chapter 4Proving Systems Section 9Methods of Calibration for Displacement and Volumetric Tank Provers Part 2Determination of the Volume of Displacement and Tank Provers by the... | |
| Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 1 - General Considerations for Measurement by Meters | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 5 - METERING SECTION 2 - MEASUREMENT OF LIQUID HYDROCARBONS BY DISPLACEMENT METERS | |
| Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 3 - Measurement of Liquid Hydrocarbons by Turbine Meters | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 5 - METERING SECTION 4 - ACCESSORY EQUIPMENT FOR LIQUID METERS | |
| Manual of Petroleum Measurement Standards Chapter 5 - Metering Section 5 - Fidelity and Security of Flow Measurement Pulsed-Data Transmission Systems | |
| Manual of Petroleum Measurement Standards Chapter 5-Metering Section 3-Turbine Meters | |
| Manual of Petroleum Measurement Standards Chapter 5-Metering Section 4-Accessory Equipment for Liquid Meters | |
| Manual of Petroleum Measurement Standards Chapter 5-Metering Section 6-Measurement of Liquid Hydrocarbons by Coriolis Meters | |
| Manual of Petroleum Measurement Standards Chapter 5\x97Metering Section 1\x97Foreword, General Considerations and Scope | |
| Manual of Petroleum Measurement Standards Chapter 5\x97Metering Section 1\x97General Considerations for Measurement by Meters | |
| Manual of Petroleum Measurement Standards Chapter 5\x97Metering Section 2\x97Measurement of Liquid Hydrocarbons by Displacement Meters | |
| Manual of Petroleum Measurement Standards Chapter 5\x97Metering Section 3\x97Measurement of Liquid Hydrocarbons by Turbine Meters | |
| Manual of Petroleum Measurement Standards Chapter 5\x97Metering Section 4\x97Accessory Equipment for Liquid Meters | |
| Manual of Petroleum Measurement Standards Chapter 5\x97Metering Section 6\x97Measurement of Liquid Hydrocarbons by Coriolis Meters | |
| Manual of Petroleum Measurement Standards Chapter 6 - Metering Assemblies - Section 2 - Loading Rack Metering Systems | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 6 - METERING ASSEMBLIES SECTION 5 - METERING SYSTEMS FOR LOADING AND UNLOADING MARINE BULK CARRIERS | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 6 - METERING ASSEMBLIES SECTION 6 - PIPELINE METERING SYSTEMS | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 6 - METERING ASSEMBLIES SECTION 7 - METERING VISCOUS HYDROCARBONS | |
| Manual of Petroleum Measurement Standards Chapter 6 - Metering Section 4 - Metering Systems for Aviation Fueling Facilities | |
| Manual of Petroleum Measurement Standards Chapter 6.1A - Metering Assemblies\x97Genera l Considerations | |
| Manual of Petroleum Measurement Standards Chapter 6.2A - Metering Assemblies\x97Truck and Rail Loading and Unloading Measurement Systems | |
| Manual of Petroleum Measurement Standards Chapter 6.3A - Metering Assemblies\x97Pipeli ne and Marine Loading/Unloading Measurement Systems | |
| Manual of Petroleum Measurement Standards Chapter 6.4A Metering Assemblies\x97Lease Automatic Custody Transfer (LACT) Systems | |
| Manual of Petroleum Measurement Standards Chapter 6\x97Metering Assemblies Section 1\x97LACT Systems | |
| Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 1 - Static Temperature Determination Using Mercury-in-Glass Tank Thermometers | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 7 - TEMPERATURE DETERMINATION SECTION 2 - PORTABLE ELECTRONIC THERMOMETERS | |
| Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 3 - Static Temperature Determination Using Portable Electronic Thermometers | |
| Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination Section 4 - Static Temperature Determination Using Fixed Automatic Tank Thermometers | |
| Manual of Petroleum Measurement Standards Chapter 7 - Temperature Determination | |
| Manual of Petroleum Measurement Standards Chapter 7.3 Temperature Determination\x97Fix ed Automatic Tank Temperature Systems | |
| Manual of Petroleum Measurement Standards Chapter 7.5 Temperature Determination - Automatic Tank Temperature Measurement Onboard Marine Vessels Carrying Refigerated Hydrocarbon and Chemical Gas Fluids | |
| Manual of Petroleum Measurement Standards Chapter 7\x97Temperature Determination Section 4\x97Dynamic Temperature Measurement | |
| Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 2 - Standard Practice for Automatic Sampling of Liquid Petroleum and Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products Errata | |
| Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 3 - Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Manual Sampling and Handling of Fuels for Volatility Measurement | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 8.1 - STANDARD PRACTICE FOR MANUAL SAMPLING OF PETROLEUM AND PETROLEUM PRODUCTS | |
| Manual of Petroleum Measurement Standards Chapter 8.2 Standard Practice for Automatic Sampling of Petroleum and Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 8.3 Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 8.4 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement | |
| Manual of Petroleum Measurement Standards Chapter 8.5 - Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 8.5 Standard Practice for Manual Piston Cylinder Sampling for Volatile Crude Oils, Condensates, and Liquid Petroleum Products | |
| MANUAL OF PETROLEUM MEASUREMENT STANDARDS CHAPTER 8.6 - SAMPLING OF LIQUIFIED NATURAL GAS - CONTINUOUS AND INTERMITTENT METHODS | |
| Manual of Petroleum Measurement Standards Chapter 8.6 Refrigerated Light Hydrocarbon Fluids\x97Sampling of Liquified Natural Gas\x97Continuous and Intermittent Methods | |
| Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 1 - Hydrometer Test Method for Density, Relative Density (Specific Gravity), or API Gravity of Crude Petroleum and Liquid... | |
| Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 2 - Pressure Hydrometer Test Method for Density or Relative Density | |
| Manual of Petroleum Measurement Standards Chapter 9 - Density Determination Section 3 - Thermohydrometer Test Method for Density and API Gravity of Crude Petroleum and Liquid Petroleum Products | |
| Manual of Petroleum Measurement Standards Chapter 9.4-Continuous Density Measurement Under Dynamic (Flowing) Conditions | |
| Manual of Petroleum Measurement Standards, Chapter 22.4 Testing Protocol for Pressure, Differential Pressure, and Temperature Measuring Devices | |
| Manual of Petroleum Measurement Standards | |
| Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 7 - Testing Protocol for Differential Pressure Flow Measurement Devices | |
| Manual of Petroluem Measurement Standards Chapter 5 - Metering - Section 8 - Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters Using Transit Time Technology | |
| Manual of Petroluem Measurement Standards Chapter 5.8 Measurement of Liquid Hydrocarbons by Ultrasonic Flow Meters | |
| MARITIME CONSIDERATIONS ON THE CONDUCT OF FAST ROPING AND RAPPELLING (FRR) | |
| MARITIME CONSIDERATIONS ON THE CONDUCT OF SPECIAL PATROL INSERTION AND EXTRACTION OPERATIONS (SPIE OPS) | |
| Material Requirements for Polyolefin Cold-Applied Tapes for Underground or Submerged Pipeline Coatings | |
| Material Requirements Materials for valves for Resistance to Sulfide Stress Cracking in Production and pipeline Service | |
| Materials Resistant to Sulfide Stress Cracking in Corrosive Petroleum Refining Environments | |
| Measurement of Bulk Cargoes by Draft Survey - Inland Barges - Data Sheet | |
| Measurement of Natural Gas by Coriolis Meter | |
| Metallic Materials for Sucker-Rod Pumps for Corrosive Oilfield Environments | |
| METERING ASSEMBLIES - SERVICE STATION DISPENSING METERING SYSTEMS | |
| Metering, Section 6 - Measurment of Liquid Hydrocarbons by Coriolis Meters | |
| Method for Determining Adhesion of Protection Sheet to Aperture Adhesive of Unitized Microfilm Carrier (Aperture Card) | |
| Microfilm Jackets | |
| Micrographics - Standard Recommended Practice for Microfilming Printed Newspapers on 35mm Roll Microfilm | |
| Model Rocketeer Glider Plans | |
| Model Rocketeer Sport Plans | |
| Model Rocketry Handbook | |
| MRSA | |
| Orifice Metering of Natural Gas and Other Related Hydrocarbon Fluids\x97Concentric , Square-edged Orifice Meters\x97Background , Development, Implementation Procedure and Example Calculations | |
| Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 1: Manual Methods | |
| Petroleum and Liquid Petroleum Products - Calibration of Horizontal Cylindrical Tanks - Part 2: Internal Electro-Optical Distance-Ranging Method | |
| Petroleum and natural gas industries - Materials for use in H2S- containing environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials TECHNICAL CIRCULAR 1... | |
| PETROLEUM AND NATURAL GAS INDUSTRIES - MATERIALS FOR USE IN H2S-CONTAINING ENVIRONMENTS IN OIL AND GAS PRODUCTION *** INCORPORATES PARTS 1, 2, AND 3 *** * SAME AS ISO 15156-1,... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 2: Cracking-resistant carbon and low alloy steels, and the use of... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 2... | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production - Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | |
| Petroleum and natural gas industries - Materials for use in H2S-containing environments in oil and gas production | |
| Petroleum and natural gas industries - Materials for use in H2Scontaining environments in oil and gas production - Part 3: Cracking-resistant CRAS (corrosion-resistant alloys) and other alloys | |
| Petroleum and natural gas industries \x97 Materials for use in H2S-containing environments in oil and gas production \x97 Part 1: General principles for selection of cracking-resistant materials | |
| Petroleum and natural gas industries \x97 Materials for use in H2S-containing environments in oil and gas production \x97 Part 2: Cracking-resistant carbon and low alloy steels, and the use of... | |
| Petroleum and natural gas industries \x97 Materials for use in H2S-containing environments in oil and gas production \x97 Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys TECHNICAL CIRCULAR 1... | |
| Petroleum and natural gas industries \x97 Materials for use in H2S-containing environments in oil and gas production \x97 Part 3: Cracking-resistant CRAs (corrosion-resistant alloys) and other alloys | |
| Petroleum and natural gas industries \x97 Materials for use in H2Scontaining environments in oil and gas production \x97 Part 2: Cracking-resistant carbon and low-alloy steels, and the use of cast... | |
| Petroleum and natural gas industries Materials for use in H2S-containing Environments in oil and gas production Part 1: General principles for selection of cracking-resistant materials - Part 2: Cracking-resistant carbon... | |
| Petroleum, petrochemical, and natural gas industries - Materials for use in H2S-containing environments in oil and gas production | |
| Plug - Straight Thread, O-Ring Seal , 1 1/4 Inch Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 1/16 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 1/2 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 1/4 Inch Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 1/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 3/4 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 3/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 5/16 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 5/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 7/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 1 Inch, Aluminum | |
| PLUG - STRAIGHT THREAD, O-RING SEAL, 1/2 INCH, ALUMINUM | |
| Plug - Straight Thread, O-Ring Seal, 1/4 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 2 1/2 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 2 1/4 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 2 1/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 2 3/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 2 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 3/4 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 3/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 5/16 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 5/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 7/16 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 7/8 Inch, Aluminum | |
| Plug - Straight Thread, O-Ring Seal, 9/16 Inch, Aluminum | |
| PLUG \x96 STRAIGHT THREAD, \x93O\x94 RING SEAL, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 1/16 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 1/2 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 1/4 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 1/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 3/4 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 3/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 5/16 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 5/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 7/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 1/4 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 2 1/2 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 2 1/4 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 2 1/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 2 3/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 2 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 3/4 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 3/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 5/16 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 5/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 7/16 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 7/8 INCH, ALUMINUM | |
| PLUG \x96 STRAIGHT THREAD, O-RING SEAL, 9/16 INCH, ALUMINUM | |
| PLUG, ELECTRIC, TWO-WIRE ADAPTER-CONNECTED, AIRCRAFT STORAGE BATTERY | |
| Procedure for bulk liquid chemical cargo inspection by cargo inspectors | |
| QUANTIFICATION AND MAPPING OF GEOMETRIC DISTORTION FOR SPECIAL APPLICATIONS | |
| RACK, VERTICAL | |
| Readers for Transparent Microforms - Methods for Measuring Performance Characteristics | |
| Recommendations for Selecting Inhibitors for Use as Sucker-Rod Thread Lubricants | |
| SEMICONDUCTOR RECTIFIERS CATHODIC PROTECTION UNITS | |
| SHELL, ELECTRICAL CONNECTOR, FOR 7, 9, 14, 20, 26, 34, 42, AND 50 CONTACT CONNECTORS | |
| SHIELD, ELECTRICAL CONNECTOR, FOR 7, 9, 14, 20, 26, 34, 44, AND 50 CONTACT CONNECTORS | |
| Soils Manual | |
| Standard Practice for Manual Sampling of Petroleum and Petroleum Products | |
| STANDARD RECOMMENDED PRACTICE FOR ALPHANUMERIC COMPUTER-OUTPUT MICROFORMS-OPERATION AL PRACTICES FOR INSPECTION AND QUALITY CONTROL | |
| STANDARD RECOMMENDED PRACTICE-SPECIFICATI ON FOR 16MM AND 35MM ROLL MICROFILM | |
| SWITCH, TOGGLE, POSITIVE BREAK, ENVIRONMENTALLY SEALED, SOLDER LUG, DOUBLE POLE, .469 MOUNTING BUSHING, 25 AMPERES | |
| SWITCH, TOGGLE, POSITIVE BREAK, ENVIRONMENTALLY SEALED, SOLDER LUG, FOUR POLE, .469 MOUNTING BUSHING, 25 AMPERES | |
| SWITCH, TOGGLE, POSITIVE BREAK, ENVIRONMENTALLY SEALED, SOLDER LUG, SINGLE POLE, .469 MOUNTING BUSHING, 25 AMPERES | |
| TAPE IDENTIFICATION, COAXIAL CABLE TRANSMISSION LINE ASSEMBLY | |
| TAPE, IDENTIFICATION, COLOR CODED, FOR AIRCRAFT TIRES | |
| Testing Protocol for Flare Gas Metering | |
| Value Strategy Manual |
| << Prev | Next >> |