AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
80
90
100
110
120
130
137
138
139
140
141
142
143
144
145
146
147
148
149
150
160
170
180
181
| Product Name | Notes |
|---|---|
| Adhesives - Determination of conventional solids content and constant mass solids content | |
| Adhesives - Wettability - Determination by measurement of contact angle and surface free energy of solid surface | |
| ADHESIVES. DETERMINATION OF CONVENTIONAL SOLIDS CONTENT AND CONSTANT MASS SOLIDS CONTENT. | |
| ADHESIVES. WETTABILITY. DETERMINATION BY MEASUREMENT OF CONTACT ANGLE AND CRITICAL SURFACE TENSION OF SOLID SURFACE. | |
| ADVANCED TECHICAL CERAMICS. MONOLITHIC CERAMICS. MECHANICAL PROPERTIES AT ROOM TEMPERATURE. PART 1: DETERMINATION OF FLEXURAL STRENGTH. | |
| ADVANCED TECHNICAL CERAMIC-MONOLITHIC CERAMICS-MECHANICAL PROPERTIES AT ROOM TEMPERATURE-PART 1: DETERMINATION OF FLEXUALL STRENGTH. (Endorsed by AENOR in September of 1995.) | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength (Endorsed by AENOR in January of 2007.) | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 2: Determination of Young's modulus, shear modulus and Poisson's ratio (Endorsed by AENOR in January of... | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 3: Determination of subcritical crack growth parameters from constant stressing rate flexural strength tests (Endorsed by... | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 4: Vickers, Knoop and Rockwell superficial hardness (Endorsed by AENOR in July of 2005.) | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 5: Statistical analysis (Endorsed by AENOR in January of 2007.) | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 6: Guidance for fractographic investigation (Endorsed by AENOR in October of 2009.) | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 7: C-ring tests (Endorsed by AENOR in August of 2010.) | |
| Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 8: Guidelines for conducting proof tests (Endorsed by AENOR in August of 2010.) | |
| Advanced technical ceramics - Methods of testing monolithic ceramics - Thermo-mechanical properties - Part 2: Determination of self-loaded deformation (Endorsed by AENOR in May of 2003.) | |
| Advanced technical ceramics - Methods of testing monolithic ceramics - Thermomechanical properties - Part 3: Determination of resistance to thermal shock by water quenching (Endorsed by AENOR in November of... | |
| Advanced technical ceramics - Methods of testing monolithic ceramics - Thermonechanical properties - Part 1: Determination of flexural strength at elevated temperatures | |
| Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 1: Determination of thermal expansion | |
| Advanced technical ceramics - Monolithic ceramics - Thermo-physical properties - Part 2: Determination of thermal diffusivity by the laser flash (or heat pulse) method | |
| Advanced technical ceramics - Monolithic ceramics. Thermo-physical properties - Part 3: Determination of specific heat capacity (Endorsed by AENOR in March of 2005.) | |
| Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 4: Determination of flexural creep deformation at elevated temperatures (Endorsed by AENOR in September of 2009.) | |
| Advanced technical ceramics - Thermomechanical properties of monolithic ceramics - Part 5: Determination of elastic moduli at elevated temperatures (Endorsed by AENOR in September of 2009.) | |
| AIR CONDITIONERS AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS - COOLING MODE - PART 3: REQUIREMENTS | |
| AIR CONDITIONERS AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS. COOLING MODE. PART 1: TERMS, DEFINITIONS AND DESIGNATIONS. | |
| AIR CONDITIONERS AND HEAT PUMPS WITH ELECTRICALLY DRIVEN COMPRESSORS. COOLING MODE. PART 2: TESTING AND REQUIREMENTS FOR MARKING. | |
| Aluminium and aluminium alloys - Circle and circle stock for the production of culinary utensils - Specifications | |
| ALUMINIUM AND ALUMINIUM ALLOYS. CIRCLE AND CIRCLE STOCK FOR THE PRODUCTION OF CULINARY UTENSILS. SPECIFICATIONS. | |
| Application of risk management for IT-networks incorporating medical devices - Part 1: Roles, responsibilities and activities | |
| Bar coding - Symbology specifications - Format Description | |
| BAR CODING. SYMBOLOGY IDENTIFIERS. | |
| BAR CODING. SYMBOLOGY SPECIFICATIONS. "CODABAR". | |
| BAR CODING. SYMBOLOGY SPECIFICATIONS. "CODE 128". | |
| BAR CODING. SYMBOLOGY SPECIFICATIONS. "CODE 39". | |
| BAR CODING. SYMBOLOGY SPECIFICATIONS. "EAN/UPC". | |
| BAR CODING. SYMBOLOGY SPECIFICATIONS. "INTERLEAVED 2 OF 5". | |
| Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols | |
| Basic principles for graphical symbols for use on equipment -- Part 1: Creation of graphical symbols for registration | |
| Basic principles for graphical symbols for use on equipment -- Part 1: Creation of symbol originals | |
| Basic principles for graphical symbols for use on equipment -- Part 2: Form and use of arrows. (ISO 80416-2:2001) | |
| Basic principles for graphical symbols for use on equipment -- Part 3: Guidelines for the application of graphical symbols | |
| DEHUMIDIFIERS WITH ELECTRICALLY DRIVEN COMPRESSORS - RATING TESTS, MARKING, OPERATIONAL REQUIREMENTS AND TECHNICAL DATA SHEET (Endorsed by AENOR in November of 2000.) | |
| DESIGN GRAPHICAL SYMBOLS FOR USE IN THE TECHNICAL DOCUMENTATION OF PRODUCTS. PART 2: SPECIFICATION FOR GRAPHICAL SYMBOLS IN A COMPUTER SENSIBLE FORM INCLUDING GRAPHICAL SYMBOLS FOR A REFERENCE LIBRARY, AND... | |
| Design of graphical symbols for use in the technical documentation of products -- Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference... | |
| Design of graphical symbols for use in the technical documentation of products -- Part 3: Classification of connect nodes, networks and their encoding. | |
| Document management -- Part 1: Principles and methods | |
| Document management -- Part 2: Metadata elements and information reference model (IEC 82045-2:2004). | |
| Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products... | |
| Domestic gas-fired forced convection air heaters for space heating not exceeding a net heat input of 70 kW, without a fan to assist transportation of combustion air and/or combustion products. | |
| Drill rigs - Safety | |
| DRILL RIGS. SAFETY. | |
| Durability of wood and wood-based products - Accelerated ageing of treated wood prior to biological testing - Leaching procedure | |
| Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety. | |
| Garden equipment - Electrically powered walk-behind and hand-held lawn trimmers and lawn edge trimmers - Mechanical safety | |
| Garden equipment - Powered lawnmovers - Safety. | |
| Garden equipment - Powered lawnmowers - Safety. | |
| Garden equipment - Powered lawnmowers - Safety | |
| GARDEN EQUIPMENT. ELECTRICALLY POWERED WALK-BEHIND AND HAND-HELD LAWN TRIMMERS AND LAWN EDGE TRIMMERS. MECHANICAL SAFETY. | |
| GARDEN EQUIPMENT. HAND HELD, INTEGRALLY POWERED HEDGE TRIMMERS. SAFETY. | |
| Garden equipment. Hand-held, integrally powered hedge trimmers. Safety. | |
| GARDEN EQUIPMENT. POWERED LAWNMOWERS. SAFETY. | |
| GENERAL REQUIREMENTS FOR COMPONENTS USED IN HYDRAULICALLY PRESSURIZED DISCHARGE PIPES, DRAINS AND SEWERS | |
| Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools | |
| Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears | |
| Hand-held non-electric power tools - Safety requirements - Part 12: Small circular, small oscillating and reciprocating saws | |
| Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools | |
| Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners | |
| Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools | |
| Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers | |
| Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools | |
| Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills | |
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners. | |
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners | |
| Hand-held non-electric power tools - Safety requirements - Part 7: Grinders | |
| Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers. | |
| Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers | |
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders. | |
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders | |
| Hand-held non-electric power tools. Safety requirements. Part 10: Compression power tools. | |
| Hand-held non-electric power tools. Safety requirements. Part 11: Nibblers and shears. | |
| HAND-HELD NON-ELECTRIC POWER TOOLS. SAFETY REQUIREMENTS. PART 12: SMALL CIRCULAR, SMALL OSCILLATING AND RECIPROCATING SAWS. | |
| HAND-HELD NON-ELECTRIC POWER TOOLS. SAFETY REQUIREMENTS. PART 13: FASTENER DRIVING TOOLS. | |
| Hand-held non-electric power tools. Safety requirements. Part 1: Assembly power tools for non-threaded mechanical fasteners. | |
| Hand-held non-electric power tools. Safety requirements. Part 2: Cutting-off and crimping power tools. | |
| Hand-held non-electric power tools. Safety requirements. Part 3: Drills and tappers. | |
| Hand-held non-electric power tools. Safety requirements. Part 4: Non-rotatory percussive power tools. | |
| Hand-held non-electric power tools. Safety requirements. Part 5: Rotatory percussive drills. | |
| Hand-held non-electric power tools. Safety requirements. Part 7: Grinders. | |
| Health Software - Part 1: General requirements for product safety (Endorsed by Asociación Española de Normalización in October of 2017.) | |
| Heat cost allocators for the determination of the consumption of room heating radiators - Appliances with electrical energy supply | |
| Heat cost allocators for the determination of the consumption of room heating radiators - Appliances without an electrical energy supply, based on the evaporation principle | |
| HEAT COST ALLOCATORS FOR THE DETERMINATION OF THE CONSUMPTION OF ROOM HEATING RADIATORS. APPLIANCES WITH ELECTRICAL ENERGY SUPPLY. | |
| IN VITRO DIAGNOSTIC SYSTEMS. TRANSPORT PACKAGES FOR MEDICAL AND BIOLOGICAL SPECIMENS. REQUIREMENTS, TESTS. | |
| Industrial bump caps (Endorsed by AENOR in November of 2012.) | |
| Industrial bump caps. | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations - Part 2: Classification of objects and codes for classes | |
| Industrial systems, installations and equipment and industrial products - Structuring principles and reference designations -- Part 1: Basic rules (Endorsed by AENOR in April of 2011.) | |
| Inland navigation vessels - Stairs with inclination angles of 45° to 60° - Requirements, types | |
| INLAND NAVIGATION VESSELS. STAIRS WITH INCLINATION ANGLES OF 45º TO 60º. REQUIREMENTS, TYPES. (Endorsed by AENOR in January of 1995.) | |
| INLAND NAVIGATION VESSELS. STAIRS WITH INCLINATION ANGLES OF 45º TO 60º. REQUIREMENTS, TYPES. | |
| Lung ventilators - Part 1: Particular requirements for critical care ventilators | |
| Lung ventilators - Part 3: Particular requirements for emergency and transport ventilators | |
| Lung ventilators. Part 1: Particular requirements for critical care ventilators. | |
| LUNG VENTILATORS. PART 2: PARTICULAR REQUIREMENTS FOR HOME CARE USE. | |
| LUNG VENTILATORS. PART 3: PARTICULAR REQUIREMENTS FOR EMERGENCY AND TRANSPORT VENTILATORS. | |
| MANIPULATING INDUSTRIAL ROBOTS. SAFETY (ISO 10218:92) (Endorsed by AENOR in February of 1994.) | |
| MANIPULATING INDUSTRIAL ROBOTS. SAFETY. | |
| Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers (Endorsed by AENOR in July of 2015.) | |
| Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers | |
| Medical electrical equipment - Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use... | |
| Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (Endorsed by AENOR in July... | |
| Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery (Endorsed by Asociación Española de... | |
| Medical electrical equipment - Part 2-58: Particular requirements for the basic safety and essential performance of lens removal devices and vitrectomy devices for ophthalmic surgery | |
| Medical electrical equipment - Part 2-59: Particular requirements for the basic safety and essential performance of screening thermographs for human febrile temperature screening | |
| Medical electrical equipment - Part 2-60: Particular requirements for the basic safety and essential performance of dental equipment (Endorsed by AENOR in July of 2015.) | |
| Medical electrical equipment -- Part 2-35: Particular requirements for the basic safety and essential performance of heating devices using blankets, pads and mattresses and intended for heating in medical use... | |
| Methods of test for ancillary components for masonry - Part 10: Determination of load capacity and load deflection characteristics of brackets. | |
| Methods of test for ancillary components for masonry - Part 11: Determination of dimensions and bow of lintels. | |
| Methods of test for ancillary components for masonry - Part 13: Determination of resistance to impact, abrasion and corrosion of organic coatings. | |
| Methods of test for ancillary components for masonry - Part 14: Determination of the initial shear strength between the prefabricated part of a composite lintel and the masonry above it... | |
| Methods of test for ancillary components for masonry - Part 2: Determination of bond strength of prefabricated bed joint reinforcement in mortar joints. | |
| Methods of test for ancillary components for masonry - Part 3: Determination of shear load capacity of welds in prefabricated bed joint reinforcement. | |
| Methods of test for ancillary components for masonry - Part 4: Determination of load capacity and load-deflection characteristics of straps | |
| Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couple test). | |
| Methods of test for ancillary components for masonry - Part 5: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (couplet test) | |
| Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test). | |
| Methods of test for ancillary components for masonry - Part 6: Determination of tensile and compressive load capacity and load displacement characteristics of wall ties (single end test) | |
| Methods of test for ancillary components for masonry - Part 7: Determination of shear load capacity and load displacement characteristics of shear ties and slip ties (couplet test for mortar... | |
| Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers. | |
| Methods of test for ancillary components for masonry - Part 8: Determination of load capacity and load-deflection characteristics of joist hangers | |
| Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels. | |
| Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels | |
| Methods of test for ancillary components for masonry. Part 4: Determination of load capacity and load-deflection characteristics of straps | |
| Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, autoclaved aerated concrete, manufactured stone and natural stone masonry units due to capillary action... | |
| Methods of test for masonry units - Part 11: Determination of water absorption of aggregate concrete, manufactured stone and natural stone masonry units due to capillary action and the initial... | |
| Methods of test for masonry units - Part 13: Determination of net and gross dry density of masonry units (except for natural stone). | |
| Methods of test for masonry units - Part 14: Determination of moisture movement of aggregate concrete and manufactured stone masonry units | |
| Methods of test for masonry units - Part 15: Determination of water vapour permeability of autoclaved aerated concrete masonry units | |
| Methods of test for masonry units - Part 16: Determination of dimensions. | |
| Methods of test for masonry units - Part 16: Determination of dimensions | |
| Methods of test for masonry units - Part 18: Determination of freeze-thaw resistance of calcium silicate masonry units | |
| Methods of test for masonry units - Part 18: Determination oof freeze-thaw resistance of calcium silicate masonry units | |
| Methods of test for masonry units - Part 19: Determination of moisture expansion of large horizontally perforated clay masonry units. | |
| Methods of test for masonry units - Part 1: Determination of compressive strength. | |
| Methods of test for masonry units - Part 1: Determination of compressive strength | |
| Methods of test for masonry units - Part 20: Determination of flatness of faces of aggregate concrete, manufactured stone and natural stone masonry units. | |
| Methods of test for masonry units - Part 20: Determination of flatness of faces of masonry units | |
| Methods of test for masonry units - Part 21: Determination of water absorption of clay and calcium silicate masonry units by cold water absorption | |
| Methods of test for masonry units - Part 22: Determination of freeze/thaw resistance of clay masonry units | |
| METHODS OF TEST FOR MASONRY UNITS - PART 2: DETERMINATION OF PERCENTAGE AREA OF VOIDS IN AGGREGATE CONCRETE MASONRY UNITS (BY PAPER INDENTATION). | |
| Methods of test for masonry units - Part 2: Determination of percentage area of voids in masonry units (by paper indentation) | |
| METHODS OF TEST FOR MASONRY UNITS - PART 3: DETERMINATION OF NET VOLUME AND PERCENTAGE OF VOIDS OF CLAY MASONRY UNITS BY HYDROSTATIC WEIGHING. | |
| METHODS OF TEST FOR MASONRY UNITS - PART 4: DETERMINATION OF REAL AND BULK DENSITY AND OF TOTAL AND OPEN POROSITY FOR NATURAL STONE MASONRY UNITS | |
| Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units. | |
| Methods of test for masonry units - Part 5: Determination of the active soluble salts content of clay masonry units | |
| Methods of test for masonry units - Part 6: Determination of bending tensile strength of aggregate concrete masonry units. | |
| METHODS OF TEST FOR MASONRY UNITS - PART 7: DETERMINATION OF WATER ABSORPTION OF CLAY MASONRY DAMP PROOF COURSE UNITS BY BOILING IN WATER | |
| Methods of test for masonry units - Part 9: Determination of volume and percentage of voids and net volume of clay and calcium silicate masonry units by sand filling | |
| METHODS OF TEST FOR MASONRY UNITS. PART 10: DETERMINATION OF MOISTURE CONTENT OF CALCIUM SILICATE AND AUTOCLAVED AERATED CONCRETE UNITS. | |
| Methods of test for mesonry units - Part 16: Determination of dimensions | |
| Mobile waste and recycling containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices - Dimensions and design | |
| Mobile waste and recycling containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices -... | |
| Mobile waste and recycling containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices -... | |
| Mobile waste and recycling containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide... | |
| Mobile waste and recycling containers - Part 5: Performance requirements and test methods | |
| Mobile waste and recycling containers - Part 6: Safety and health requirements | |
| Mobile waste containers - Part 1: Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design | |
| Mobile waste containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and... | |
| Mobile waste containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and... | |
| Mobile waste containers - Part 4: Containers with 4 wheels with capacity up to 1 700 l with flat lid(s), for wide trunnion or BG- and/or wide comb lifting device... | |
| Mobile waste containers - Part 5: Performance requirements and test methods. | |
| Mobile waste containers - Part 5: Performance requirements and test methods | |
| Mobile waste containers - Part 6: Safety and health requirements. | |
| Mobile waste containers - Part 6: Safety and health requirements | |
| MOBILE WASTE CONTAINERS. PART 1: CONTAINERS WITH 2 WHEELS WITH A CAPACITY FROM 80 L TO 390 L FOR COMB LIFTING DEVICES. DIMENSIONS AND DESIGN. | |
| MOBILE WASTE CONTAINERS. PART 2: CONTAINERS WITH 4 WHEELS WITH A CAPACITY FROM 500 L TO 1 200 L WITH FLAT LID(S), FOR TRUNNION AND/OR COMB LIFTING DEVICES. DIMENSIONS AND... | |
| MOBILE WASTE CONTAINERS. PART 3: CONTAINERS WITH 4 WHEELS, WITH A CAPACITY FROM 770 L TO 1 300 L WITH DOME LID(S), FOR TRUNNION AND/OR LIFTING DEVICES. DIMENSIONS AND DESIGN. | |
| MOBILE WASTE CONTAINERS. PART 4: CONTAINERS WITH 4 WHEELS WITH A CAPACITY FROM 750 L TO 1 700 L WITH FLAT LID(S), FOR WIDE TRUNNION OF BG-AND/OR WIDE COMB LIFTING... | |
| MOBILE WASTE CONTAINERS. PART 5: PERFORMANCE REQUIREMENTS AND TEST METHODS. | |
| MOBILE WASTE CONTAINERS. PART 6: SAFETY AND HEALTH REQUIREMENTS. | |
| Multi-burner gas-fired overhead radiant tube heater system for non-domestic use. Part 3: System F, safety. | |
| Multi-burner gas-fired overhead radiant tube heater systems for non domestic use - Part 3: System F - Safety | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D - Safety | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 1: System D, safety. | |
| MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 1: SYSTEM D, SAFETY | |
| MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 2: SYSTEM E - SAFETY | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 3: System F, safety. | |
| MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 3: SYSTEM F, SAFETY | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H - Safety | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use - Part 4: System H, safety. | |
| MULTI-BURNER GAS-FIRED OVERHEAD RADIANT TUBE HEATER SYSTEMS FOR NON-DOMESTIC USE - PART 4: SYSTEM H, SAFETY | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. Part 1: System D, safety. | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. Part 2: System E, safety. | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. Part 3: System F, safety. | |
| Multi-burner gas-fired overhead radiant tube heater systems for non-domestic use. Part 4: System H, safety. | |
| Multi-burner gas-fired overhead radiatn tube heater systems for non-domestic use. Part 1: System D, safety. | |
| Multi-burner gas-fired overhead tube heater systems for non-domestic use. Part 4: System H, safety. | |
| PARTICULAR REQUIREMENTS FOR SAFETY OF MEDICAL SUPPLY UNITS. | |
| Particulate air filters for general ventilation - Determination of the filtration performance | |
| PARTICULATE AIR FILTERS FOR GENERAL VENTILATION. REQUIREMENTS, TESTING, MARKING. | |
| Personal fall protection equipment - Anchor devices (Endorsed by AENOR in October of 2012.) | |
| Personal fall protection equipment - Sit harnesses (Endorsed by Asociación Española de Normalización in June of 2024.) | |
| Personal fall protection equipment - Sit harnesses | |
| PERSONAL PROTECTIVE EQUIPMENT FOR PREVENTION OF FALLS FROM A HEIGHT. SIT HARNESSES. | |
| PLASTICS HOSES AND HOSE ASSEMBLIES. THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE. SPECIFICATION. | |
| PLASTICS HOSES AND HOSE ASSEMBLIES. THERMOPLASTICS TEXTILE REINFORCED HYDRAULIC TYPE. SPECIFICATION | |
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings for pressure piping systems - Test method for maximum deformation by crushing | |
| Plastics piping systems - Injection-moulded socket fittings for solvent-cemented joints for pressure piping - Test method for resistance to a short-term internal hydrostatic pressure | |
| Plastics piping systems - Injection-moulded thermoplastics fittings for elastic sealing ring type joints for pressure piping - Test method for resistance to a short-term internal pressure without end thrust | |
| PLASTICS PIPING SYSTEMS FOR THE TRANSPORT OF WATER INTENDED FOR HUMAN CONSUMPTION. MIGRATION ASSESSMENT. PART 1: DETERMINATION OF MIGRATION VALUES OF PLASTICS PIPES. | |
| Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements (Endorsed by AENOR in November of 2012.) | |
| Preparation of instructions for use - Structuring, content and presentation - Part 1: General principles and detailed requirements | |
| Pressure gauges - Part 1: Bourdon tube pressure gauges - Dimensions, metrology, requirements and testing | |
| Pressure gauges - Part 3: Diaphragm and capsule pressure gauges - Dimensions, metrology, requirements and testing | |
| PRESSURE GAUGES. PART 1: BOURDON TUBE PRESSURE GAUGES. DIMENSIONS, METROLOGY, REQUIREMENTS AND TESTING. | |
| PRESSURE GAUGES. PART 2: SELECTION AND INSTALLATION RECOMMENDATIONS FOR PRESSURE GAUGES. | |
| Protection against falls from a height - Anchor devices - Requirements and testing. | |
| PROTECTION AGAINST FALLS FROM A HEIGHT. ANCHOR DEVICES. REQUIREMENTS AND TESTING. | |
| PUMPS AND PUMP UNITS FOR LIQUIDS - COMMON SAFETY REQUIREMENTS | |
| Pumps and pump units for liquids. Common safety requirements. | |
| Quantities and units - Part 14: Telebiometrics related to human physiology | |
| Quantities and units -- Part 13: Information science and technology | |
| Quantities and units- Part 6: Electromagnetism | |
| Round and sawn timber - Terminology - Part 10: Terms relating to stain and fungal attack | |
| Round and sawn timber - Terminology - Part 11: Terms relating to degrade by insects | |
| ROUND AND SAWN TIMBER - TERMINOLOGY - PART 12: ADDITIONAL TERMS AND GENERAL INDEX. | |
| Round and sawn timber - Terminology - Part 1: General terms common to round timber and sawn timber | |
| Round and sawn timber - Terminology - Part 3: General terms relating to sawn timber | |
| Round and sawn timber - Terminology | |
| ROUND AND SAWN TIMBER. TERMINOLOGY. PART 2: GENERAL TERMS RELATING TO ROUND TIMBER. | |
| ROUND AND SAWN TIMBER. TERMINOLOGY. PART 4: TERMS RELATING TO MOISTURE CONTENT. | |
| ROUND AND SAWN TIMBER. TERMINOLOGY. PART 5: TERMS RELATING TO DIMENSIONS OF ROUND TIMBER. | |
| ROUND AND SAWN TIMBER. TERMINOLOGY. PART 6: TERMS RELATING TO DIMENSIONS OF SAWN TIMBER. | |
| ROUND AND SAWN TIMBER. TERMINOLOGY. PART 7: TERMS RELATING TO ANATOMICAL STRUCTURE OF TIMBER. | |
| ROUND AND SAWN TIMBER. TERMINOLOGY. PART 8: TERMS RELATING TO FEATURES OF ROUND TIMBER. | |
| ROUND AND SAWN TIMBER. TERMINOLOGY. PART 9: TERMS RELATING TO FEATURES OF SAWN TIMBER. | |
| Rubber hoses and hose assemblies - Rubber-covered spiral wire reinforced hydraulic type - Specification | |
| Rubber hoses and hose assemblies - Textile reinforced hydraulic type - Specification | |
| Rubber hoses and hose assemblies - Wire braid reinforced compact type for hydraulic applications - Specification | |
| Rubber hoses and hose assemblies - Wire braid reinforced hydraulic type - Specification | |
| RUBBER HOSES AND HOSE ASSEMBLIES. RUBBER-COVERED SPIRAL WIRE REINFORCED HYDRAULIC TYPE. SPECIFICATION. | |
| RUBBER HOSES AND HOSE ASSEMBLIES. TEXTILE REINFORCED HYDRAULIC TYPE. SPECIFICATION. | |
| RUBBER HOSES AND HOSE ASSEMBLIES. WIRE BRAID REINFORCED COMPACT TYPE FOR HYDRAULIC APPLICATIONS. SPECIFICATION. | |
| RUBBER HOSES AND HOSE ASSEMBLIES. WIRE BRAID REINFORCED HYDRAULIC TYPE. SPECIFICATION. | |
| Sacks for the transport of food aid - Paper sacks | |
| Sacks for the transport of food aid - Sacks made of lined cotton fabric | |
| Sacks for the transport of food aid - Sacks made of polyethylene film | |
| Sacks for the transport of food aid - Sacks made of woven cotton/polyolefin fabric | |
| Sacks for the transport of food aid - Tubular sacks made of composite film | |
| Safety of machinery - Visual danger signals - General requirements, design and testing | |
| SAFETY OF MACHINERY. SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE LOWER LIMBS. | |
| SAFETY OF MACHINERY. VISUAL DANGER SIGNALS. GENERAL REQUIREMENTS, DESIGN AND TESTING. | |
| Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock - Safety requirements | |
| SAFETY OF UNSHIELDED TUNNEL BORING MACHINES AND RODLESS SHAFT BORING MACHINES FOR ROCK. | |
| Safety of unshielded tunnel boring machines and rodless shaft boring machines for rock | |
| Safety of woodworking machines - Hand fed surface planing machines | |
| SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 1: SINGLE SPINDLE VERTICAL MOULDING MACHINES | |
| Safety of woodworking machines - One side moulding machines with rotating tool - Part 2: Single spindle hand fed/integrated fed routing machines | |
| SAFETY OF WOODWORKING MACHINES - ONE SIDE MOULDING MACHINES WITH ROTATING TOOL - PART 2: SINGLE SPINDLE HANDFED/INTEGRATED FED ROUTING MACHINES | |
| Safety of woodworking machines - One side moulding machines with rotating tool - Part 3: Numerically controlled (NC) boring and routing machines | |
| Safety of woodworking machines - One side moulding machines with rotating tools - Part 3: Numerically controlled (NC) boring and routing machines | |
| Safety of woodworking machines - One side thickness planing machines | |
| Safety of woodworking machines - Surface planing and thicknessing machines | |
| SAFETY OF WOODWORKING MACHINES. HANDFED SURFACE PLANING MACHINES. | |
| Safety of woodworking machines. One side moulding machines with rotating tolls. Part 1: Single spindle vertical moulding machines. | |
| SAFETY OF WOODWORKING MACHINES. ONE SIDE MOULDING MACHINES WITH ROTATING TOOL. PART 3: NUMERICAL CONTROL (NC) BORING MACHINES AND ROUTING MACHINES | |
| SAFETY OF WOODWORKING MACHINES. ONE SIDE THICKNESS PLANING MACHINES. | |
| SAFETY OF WOODWORKING MACHINES. SURFACE PLANING AND THICKNESSING MACHINES. | |
| Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test | |
| Safety rules for the construction and installation of lifts - Examinations and tests - Part 50: Design rules, calculations, examinations and tests of lift components | |
| Safety rules for the construction and installation of lifts - Existing lifts - Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts | |
| Safety rules for the construction and installation of lifts - Existing lifts - Part 82: Rules for the improvement of the accessibility of existing lifts for persons including persons with... | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of goods only - Part 31: Accessible goods only lifts | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 20: Passenger and goods passenger lifts | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 21: New passenger and goods passenger lifts in existing building... | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Electric lifts with inclined path | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 22: Passenger and goods passenger lifts with inclined travel path... | |
| Safety rules for the construction and installation of lifts - Lifts for the transport of persons and goods - Part 28: Remote alarm on passenger and goods passenger lifts | |
| Safety rules for the construction and installation of lifts - Part 1: Electric lifts - A2: Machinery and pulley spaces | |
| SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS. | |
| SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 1: ELECTRIC LIFTS | |
| Safety rules for the construction and installation of lifts - Part 2: Hydraulic lifts - A2: Machinery and pulley spaces | |
| SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS. | |
| SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS - PART 2: HYDRAULIC LIFTS | |
| Safety rules for the construction and installation of lifts - Part 3: Electric and hydraulic service lifts | |
| Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lift - Part 70: Accessibility to lifts for persons including persons with disability... | |
| Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 72: Firefighters lifts | |
| Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire | |
| Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 76: Evacuation of persons with disabilities using lifts | |
| Safety rules for the construction and installation of lifts - Particular applications to passenger lifts and goods passenger lifts - Part 71: Vandal resistant lifts | |
| Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 40: Stairlifts and inclined lifting platforms intended for persons... | |
| Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 41: Vertical lifting platforms intended for use by persons... | |
| Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 43: Lifts for cranes | |
| Safety rules for the construction and installation of lifts - Special lifts for the transport of persons and goods - Part 44: Lifting appliances in wind turbines | |
| Safety rules for the construction and installation of lifts. Existing lifts. Part 80: Rules for the improvement of safety of existing passenger and goods passenger lifts | |
| Safety rules for the construction and installation of lifts. Part 1: Electric lifts | |
| SAFETY RULES FOR THE CONSTRUCTION AND INSTALLATION OF LIFTS. PART 3: ELECTRIC AND HYDRAULIC SERVICE LIFTS. | |
| Safety rules for the construction and installation of lifts. Particular applications for passenger and goods passenger lifts. Part 73: Behaviour of lifts in the event of fire | |
| Safety rules for the construction and installation of lifts. Particular applications to passenger and goods passenger lifts. Part 71: Vandal resistant lifts | |
| Safety rules for the construction and installations of lifts - Particular applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability... | |
| Safety rules for the construction and installations of lifts - Particular applications for passenger and good passengers lifts - Part 70: Accessibility to lifts for persons including persons with disability. | |
| Safety rules for the construction and installations of lifts - Particular applications for passenger and goods passenger lifts - Part 77: Lifts subject to seismic conditions | |
| Sanitary tapware - Automatic shut-off valves PN 10 | |
| Sanitary tapware - Mechanical mixing valves (PN 10) - General technical specifications | |
| SANITARY TAPWARE. MECHANICAL MIXERS (PN 10). GENERAL TECHNICAL SPECIFICATIONS. | |
| Separator systems for light liquids (e.g. oil and petrol) - Part 1: Principles of product design, performance and testing, marking and quality control | |
| Separator systems for light liquids (e.g. oil and petrol) - Part 2: Selection of nominal size, installation, operation and maintenance | |
| Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance | |
| Short link chain for lifting purposes - Safety - Part 2: Medium tolerance chain for chain slings - Grade 8 | |
| SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 3: MEDIUM TOLERANCE CHAIN FOR CHAIN SLINGS - GRADE 4 | |
| Short link chain for lifting purposes - Safety - Part 4: Chain slings - Grade 8 | |
| SHORT LINK CHAIN FOR LIFTING PURPOSES - SAFETY - PART 5: CHAIN SLINGS - GRADE 4 | |
| Short link chain for lifting purposes - Safety - Part 6: Chain slings - Specification for information for use and maintenance to be provided by the manufacturer | |
| Short link chain for lifting purposes - Safety - Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT) | |
| SHORT LINK CHAIN FOR LIFTING PURPOSES. SAFETY. PART 1: GENERAL CONDITIONS OF ACCEPTANCE. | |
| SHORT LINK CHAIN FOR LIFTING PURPOSES. SAFETY. PART 2: MEDIUM TOLERANCCE CHAIN FOR CHAIN SLINGS. GRADE 8. | |
| Short link chain for lifting purposes. Safety. Part 3: Medium tolerance chain for chain sling. Grade 4. | |
| SHORT LINK CHAIN FOR LIFTING PURPOSES. SAFETY. PART 4: CHAIN SLINGS. GRADE 8. | |
| Short link chain for lifting purposes. Safety. Part 6: Chain slings. Specification for information for use and maintenance to be provided by the manufacturer. | |
| Short link chain for lifting purposes. Safety. Part 7: Fine tolerance hoist chain, Grade T (Types T, DAT and DT). | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications | |
| Specification for ancillary components for masonry - Part 1: Ties, tension straps, hangers and brackets | |
| Specification for ancillary components for masonry - Part 1: Wall ties, tension straps, hangers and brackets | |
| Specification for ancillary components for masonry - Part 2: Lintels. | |
| Specification for ancillary components for masonry - Part 2: Lintels | |
| Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork. | |
| Specification for ancillary components for masonry - Part 3: Bed joint reinforcement of steel meshwork | |
| Specification for installations inside buildings conveying water for human consumption - Part 2: Design | |
| Specification for masonry units - Part 1: Clay masonry units | |
| Specification for masonry units - Part 2: Calcium silicate masonry units | |
| Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and light-weight aggregates) | |
| Specification for masonry units - Part 3: Aggregate concrete masonry units (Dense and lightweight aggregates) | |
| Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units. | |
| Specification for masonry units - Part 4: Autoclaved aerated concrete masonry units | |
| Specification for masonry units - Part 5: Manufactured stone masonry units | |
| Specification for masonry units - Part 6: Natural stone masonry units. | |
| Specification for masonry units - Part 6: Natural stone masonry units | |
| Specifications for installations inside buildings conveying water for human consumption - Part 1: General. | |
| Specifications for installations inside buildings conveying water for human consumption - Part 3: Pipe sizing - Simplified method | |
| Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation | |
| Specifications for installations inside buildings conveying water for human consumption - Part 5: Operation and maintenance | |
| Specifications for installations inside buildings coveying water for human consumption. Part 1: General. | |
| THERMAL INSULAING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF THICKNESS. | |
| Thermal insulating products for building applications - Determination of compression behaviour | |
| Thermal insulating products for building applications - Determination of flatness | |
| Thermal insulating products for building applications - Determination of length and width | |
| Thermal insulating products for building applications - Determination of squareness | |
| Thermal insulating products for building applications - Determination of thickness | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF COMPRESSION BEHAVIOUR. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF FLATNESS. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF LENGTH AND WIDTH. | |
| THERMAL INSULATING PRODUCTS FOR BUILDING APPLICATIONS. DETERMINATION OF SQUARENESS. | |
| Thermal performance of buildings - Calculation of energy use for heating - Residential buildings | |
| THERMAL PERFORMANCE OF BUILDINGS. CALCULATION OF ENERGY USE FOR HEATING. RESIDENTIAL BUILDINGS. | |
| Timber structures - Test methods - Determination of mechanical properties of wood based panels (Endorsed by AENOR in August of 2006.) | |
| Timber structures - Test methods - Determination of mechanical properties of wood based panels | |
| TIMBER STRUCTURES. TEST METHODS. DETERMINATION OF MECHANICAL PROPERTIEs of wood based panels. | |
| Tools for woodworking - Safety requirements - Part 1: Milling tools, circular saw blades | |
| TOOLS FOR WOODWORKING - SAFETY REQUIREMENTS - PART 2: REQUIREMENTS FOR THE SHANK OF SHANK MOUNTED MILLING TOOLS. | |
| Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools/circular saw blades | |
| Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling tools | |
| Tools for woodworking - Safety requirements - Part 2: Requirements for the shank of shank mounted milling | |
| Tools for woodworking - Safety requirements - Part 3: Clamping devices | |
| TOOLS FOR WOODWORKING. SAFETY REQUIREMENTS. PART 1: MILLING TOOLS AND CIRCULAR SAW BLADES. | |
| Tools for woodworking. Safety requirements. Part 1: Milling tools, circular saw blades | |
| Transportable gas cylinders - Cylinder valves - Specification and type testing. | |
| Transportable gas cylinders - Pin-index, yoke-type valve outlet connections for medical use. | |
| TRANSPORTABLE GAS CYLINDERS. CYLINDER VALVES. SPECIFICATION AND TYPE TESTING. | |
| TRANSPORTABLE GAS CYLINDERS. PIN-INDEX, YOKE-TYPE VALVE OUTLET CONNECTIONS FOR MEDICAL USE. | |
| TRANSPORTABLES GAS CYLINDRES. PIN INDEX, YOKE-TYPE VALVE OUTLET CONNECTION FOR MEDICAL USE. | |
| Wall-hung urinals - Connecting dimensions | |
| Water supply - Requirements for systems and components outside buildings | |
| Wood preservatives - Accelerated ageing of treated wood prior to biological testing - Leaching procedure | |
| Wood preservatives - Determination of the protective effectiveness against wood destroying basidiomycetes - Application by surface treatment | |
| WORKPLACE ATMOSPHERES. DIFFUSIVE SAMPLERS FOR THE DETERMINATION OF GASES AND VAPOURS. REQUIREMENTS AND TEST METHODS. | |
| Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods |
| << Prev | Next >> |