AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
80
90
100
110
120
130
138
139
140
141
142
143
144
145
146
147
148
149
150
160
170
180
181
| Product Name | Notes |
|---|---|
| Adhesives - Solvent-borne and solvent-free adhesives - Determination of flashpoint | |
| ADHESIVES - TERMS AND DEFINITIONS | |
| ADHESIVES. SOLVENT-BORNE AND SOLVENT-FREE ADHESIVES. DETERMINATION OF FLASHPOINT. | |
| Admixtures for concrete, mortar and grout - Admixtures for grout for prestressing tendons - Part 4: Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout - Concrete admixtures - Part 2: Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout - Part 1: Common requirements | |
| Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling. | |
| Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity and marking and labelling | |
| Admixtures for concrete, mortar and grout - Part 3: Admixtures for masonry mortar - Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling. | |
| Admixtures for concrete, mortar and grout - Part 4: Admixtures for grout for prestressing tendons - Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout - Part 5: Admixtures for sprayed concrete - Definitions, requirements, conformity, marking and labelling | |
| Admixtures for concrete, mortar and grout - Part 6: Sampling, assessment and verification of the constancy of performance | |
| Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity. | |
| Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control and evaluation of conformity | |
| Admixtures for concrete, mortar and grout - Part 6: Sampling, conformity control, evaluation of conformity, marking and labelling. | |
| Admixtures for concrete, mortar and grout - Part 7: Shrinkage reducing admixtures - Definitions, requirements, conformity, marking and labelling | |
| ADMIXTURES FOR CONCRETE, MORTAR AND GROUT. PART 2: CONCRETE ADMIXTURES. DEFINITIONS AND REQUIREMENTS. | |
| Admixtures for concrete, mortar and grout. Part 4: Admixtures for grout for prestressing tendons. Definitions, requirements and conformity. | |
| Aerospace series - Aerospace Operator Self-Verification Programs (Endorsed by Asociación Española de Normalización in July of 2018.) | |
| Aerospace series - Certificate of conformity requirements (Endorsed by Asociación Española de Normalización in January of 2024.) | |
| Aerospace series - Delegated Product Release Verification (Endorsed by Asociación Española de Normalización in November of 2017.) | |
| Aerospace series - Foreign Object Damage (FOD) Prevention Program - Requirements for Aviation, Space, and Defence Organizations (Endorsed by Asociación Española de Normalización in December of 2018.) | |
| Aerospace series - General Principles of Obsolescence Management of chemicals, materials and processes (Endorsed by Asociación Española de Normalización in September of 2018.) | |
| Aerospace series - General recommendation for the BIT Architecture in an integrated system (Endorsed by Asociación Española de Normalización in February of 2022.) | |
| Aerospace series - Industrialization - Guidelines for establishing the manufacturing and inspection file and the associated justifications (Endorsed by Asociación Española de Normalización in May of 2025.) | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - Part 120: CAD 3D explicit geometry with... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D CAD and PDM data - PART 121: Semantic representation of CAD 3D... | |
| Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 001: Structure (Endorsed by Asociación Española... | |
| Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts | |
| Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 004: Description methods | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 005: Authentication and Verification (Endorsed by... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and definitions (Endorsed by... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 010: Overview Data Flow (Endorsed by... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 014: Reference process description ''Retrieval'' | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 015: Reference process description ''Removal'' | |
| Aerospace series - LOTAR - Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 100: Common concepts for Long term... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 115: Explicit CAD assembly structure (Endorsed... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 125: Explicit CAD assembly structure with... | |
| Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 200: Common Concepts for LOng Term... | |
| Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 002: Requirements (Endorsed by Asociación Española de... | |
| Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 007: Terms and References (Endorsed by Asociación... | |
| Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 110: CAD mechanical 3D Explicit geometry information... | |
| Aerospace series - LOTAR -LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 210: Product management data in an "as... | |
| Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 011: Reference process description "Data preparation" | |
| Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 012: Reference process description ''Ingest'' | |
| Aerospace series - LOTAR Long Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 013: Reference process description ''Archival Storage'' | |
| Aerospace Series - Management of unsalvageable Items (Endorsed by Asociación Española de Normalización in January of 2023.) | |
| Aerospace series - Notice of Change (NOC) Requirements | |
| Aerospace series - Notice of change (NOC) | |
| Aerospace series - Programme management - Execution logic (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| Aerospace series - Programme management - Expression of need - Guidance on and format for (Need) Technical Specification (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Aerospace series - Programme Management - General guidelines for acquisition and supply of open systems (Endorsed by AENOR in February of 2015.) | |
| Aerospace series - Programme management - Guide for establishing and implementing a development plan (Endorsed by Asociación Española de Normalización in January of 2026.) | |
| Aerospace series - Programme management - Guide for reliability control (Endorsed by Asociación Española de Normalización in July of 2025.) | |
| Aerospace series - Programme Management - Guide for the management of Systems Engineering (Endorsed by AENOR in October of 2015.) | |
| Aerospace series - Programme Management - Guide for the risk management (Endorsed by AENOR in July of 2016.) | |
| Aerospace series - Programme management - Guide to dependability and safety control (Endorsed by Asociación Española de Normalización in July of 2025.) | |
| Aerospace series - Programme management - Guidelines for project management specification (Endorsed by AENOR in March of 2005.) | |
| Aerospace series - Programme management - Recommendations for the implementation of the integrated logistic support (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| Aerospace series - Programme Management - Recommendations to implement risk management and opportunity management (Endorsed by Asociación Española de Normalización in October of 2024.) | |
| Aerospace series - Quality management systems - Assessment (based on EN ISO 9001:2000) | |
| Aerospace series - Quality management systems - Assessment applicable to maintenance organizations (based on ISO 9001:2000) | |
| Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000) | |
| Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking (Endorsed by AENOR in September of 2006.) | |
| Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Aerospace series - Quality management systems - Non-deliverable software requirements | |
| Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation (Endorsed by Asociación Española de Normalización in August of 2020.) | |
| Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation | |
| Aerospace series - Quality management systems - Nonconformance documentation | |
| Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs | |
| Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Certification/Regist rations Programs (Endorsed by AENOR in October of 2008.) | |
| Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Certification/Regist rations Programs | |
| Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certifi cation Programs | |
| Aerospace series - Quality management systems - Part 003: Requirements for Aerospace Quality Management System (AQMS) Auditor Training and Qualification | |
| Aerospace series - Quality management systems - Part 1: Requirements for Certification of Aviation, Space, and Defense (Endorsed by Asociación Española de Normalización in January of 2024.) | |
| Aerospace series - Quality management systems - Part 3: Requirements for Aviation, Space, and Defence Auditor Training, Development, Competence, and Authentication (Endorsed by Asociación Española de Normalización in January of... | |
| Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts (Endorsed by AENOR in March of 2005.) | |
| Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts | |
| Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products | |
| Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Regist rations Programs (Endorsed by AENOR in September of 2006.) | |
| Aerospace series - Quality management systems - Requirements for Aerospace Quality Management System Certification/Regist rations Programs | |
| Aerospace series - Quality management systems - Requirements for conducting audits of aviation, space, and defence quality management Systems | |
| Aerospace series - Quality management systems - Requirements for stockist distributors (based on ISO 9001:2000) | |
| Aerospace Series - Quality Management Systems - Statistical Product - Acceptance Requirements (Endorsed by Asociación Española de Normalización in December of 2019.) | |
| Aerospace series - Quality management systems - Variation management of key characteristics | |
| Aerospace series - Quality systems - Direct Delivery Authorization - Guidance for Aerospace Companies (Endorsed by Asociación Española de Normalización in February of 2019.) | |
| Aerospace series - Quality systems - Direct Ship - Guidance for Aerospace Companies (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Aerospace series - Quality systems - Direct Ship Guidance for Aerospace Companies | |
| Aerospace series - Quality systems - First article inspection (Endorsed by AENOR in September of 2006.) | |
| Aerospace series - Quality systems - First article inspection requirements | |
| Aerospace series - Quality systems - Model for quality assurance applicable to maintenance organizations | |
| Aerospace series - Quality systems - Record retention (Endorsed by Asociación Española de Normalización in August of 2020.) | |
| Aerospace series - Requirements for Advanced Product Quality Planning and Production Part Approval Process (Endorsed by Asociación Española de Normalización in December of 2018.) | |
| Aerospace series - Root cause analysis and problem solving (9S Methodology) (Endorsed by Asociación Española de Normalización in June of 2018.) | |
| Aerospace series. Quality management systems. Requirements (based on ISO 9001:2000) and quality systems. Model for quality assurance in design, development, production, installation and servicing (based on ISO 9001:1994) | |
| AGRICULTURAL AND FORESTRY MACHINERY - CENTRE PIVOT AND MOVING LATERAL TYPES IRRIGATION MACHINES - SAFETY. | |
| Agricultural and forestry machinery - Centre pivot and moving lateral types irrigation machines - Safety | |
| Agricultural and forestry machinery - Reel machines for irrigation - Safety | |
| AGRICULTURAL AND FORESTRY MACHINERY. REEL MACHINES FOR IRRIGATION. SAFETY | |
| AGRICULTURAL AND FORESTRY MACHINERY. SPRAYERS AND LIQUID FERTILIZER DISTRIBUTORS. SAFETY. | |
| Aluminium and aluminium alloys - Circle and circle stock for the production of general applications - Specifications | |
| ALUMINIUM AND ALUMINIUM ALLOYS. CIRCLE AND CIRCLE STOCK FOR GENERAL APPLICATIONS. SPECIFICATIONS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 1: GENERAL REQUIREMENTS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 2: PARTICULAR SYSTEMS FOR USE IN ETHYLENE OXIDE STERILIZERS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 3: PARTICULAR SYSTEMS FOR USE IN MOIST HEAT STERILIZERS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 4: PARTICULAR SYSTEMS FOR USE IN IRRADIATION STERILIZERS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 5: PARTICULAR SYSTEMS FOR USE IN LOW TEMPERATURE STEAM AND FORMALDEHYDE STERILIZERS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 6: PARTICULAR SYSTEMS FOR USE IN DRY HEAT STERILIZERS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 7: PARTICULAR REQUIREMENTS FOR SELF-CONTAINED BIOLOGICAL INDICATOR SYSTEMS FOR USE IN MOIST HEAT STERILIZERS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 8: PARTICULAR REQUIREMENTS FOR SELF-CONTAINED BIOLOGICAL INDICATOR SYSTEMS FOR USE IN ETHYLENE OXIDE STERILIZERS. | |
| BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS PROCESSES. PART 2: PARTICULAR SYSTEMS FOR USE IN ETHYLENE OXIDE STERILIZERS. | |
| Cast iron pipe systems and their components for the evacuation of water from works - characteristics and test methods | |
| Cast iron pipes and fittings, their joints and accessories for the evacuation of water from buildings - Requirements, test methods and quality assurance | |
| CHEMICAL ANALYSIS OF REFRACTORY PRODUCTS. PART 2: PRODUCTS CONTAINING SILICA AND/OR ALUMINA (WET METHOD). | |
| CHEMICAL USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. ALUMINIUM SULFATE. | |
| CHEMICAL USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. IRON (II) SULFATE. | |
| Chemicals used for treatment for water intended for human consumption - Aluminium iron (III) sulfate. | |
| Chemicals used for treatment of water intended for human consumption - Aluminium chloride (monomeric), aluminium chloride hydroxide (monomeric) and aluminium chloride hydroxide sulfate (monomeric) | |
| Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) chloride (monomeric) and aluminium iron (III) chloride hydroxide (monomeric). | |
| Chemicals used for treatment of water intended for human consumption - Aluminium iron (III) sulfate | |
| Chemicals used for treatment of water intended for human consumption - Aluminium iron(III) chloride (monomeric) and aluminium iron(III) chloride hydroxide (monomeric) | |
| Chemicals used for treatment of water intended for human consumption - Aluminium sulfate | |
| Chemicals used for treatment of water intended for human consumption - Calcium hypochlorite | |
| Chemicals used for treatment of water intended for human consumption - Carbon dioxide | |
| Chemicals used for treatment of water intended for human consumption - Chlorine | |
| Chemicals used for treatment of water intended for human consumption - Hydrochloric acid | |
| Chemicals used for treatment of water intended for human consumption - Hydrogen peroxide | |
| Chemicals used for treatment of water intended for human consumption - Iron (II) sulfate | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) chloride sulfate | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) chloride | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate liquid | |
| Chemicals used for treatment of water intended for human consumption - Iron (III) sulfate solution | |
| Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxide silicate | |
| Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxied silicate. | |
| Chemicals used for treatment of water intended for human consumption - Polyaluminium chloride hydroxyde and polyaluminium chloride hydroxyde sulfate | |
| Chemicals used for treatment of water intended for human consumption - Polyaluminium hydroxide silicate sulfate | |
| Chemicals used for treatment of water intended for human consumption - Polyaminium hydroxide silicate sulfate. | |
| Chemicals used for treatment of water intended for human consumption - Sodium aluminate | |
| Chemicals used for treatment of water intended for human consumption - Sodium carbonate | |
| Chemicals used for treatment of water intended for human consumption - Sodium chlorite | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate | |
| Chemicals used for treatment of water intended for human consumption - Sodium hydroxide | |
| Chemicals used for treatment of water intended for human consumption - Sodium hypochlorite | |
| Chemicals used for treatment of water intended for human consumption - Sulfuric acid | |
| Chemicals used for treatment of water intended for human consumption - Sulphuric acid | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. ALUMINIUM CHLORIDE, ALUMINIUM CHLORIDE HYDROXIDE AND ALUMINIUM CHLORIDE HYDROXIDE SULFATE (MONOMERIC). | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CALCIUM HYPOCHLORITE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CARBON DIOXIDE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. CHLORINE | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. HYDROCHLORIC ACID. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. HYDROGEN PEROXIDE. | |
| Chemicals used for treatment of water intended for human consumption. Hydrogen peroxide | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. IRON (III) CHLORIDE SULFATE | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. IRON (III) CHLORIDE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. IRON (III) SULFATE | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. POLYALUMINIUM CHLORIDE HYDROXIDE AND POLYALUMINIUM CHLORIDE HYDROXIDE SULFATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM ALUMINATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM CARBONATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM CHLORITE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM HYDROGEN CARBONATE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM HYDROXIDE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SODIUM HYPOCHLORITE. | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. SULFURIC ACID. | |
| DESTRUCTIVE TESTS OF WELDS IN METALLIC MATERIALS. IMPACT TESTS. TEST SPECIMEN LOCATION, NOTCH ORIENTATION AND EXAMINATION. | |
| DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. BEND TESTS. | |
| DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. LONGITUDINAL TENSILE TEST ON WELD METAL IN FUSION WELDED JOINTS. | |
| DESTRUCTIVE TESTS ON WELDS IN METALLIC MATERIALS. TRANSVERSE TENSILE TEST. | |
| Door leaves - Determination of the resistance to hard body impact | |
| Door leaves - General and local flatness - Measurement method | |
| DOOR LEAVES - METHOD FOR MEASUREMENT OF HEIGHT, WIDTH, THICKNESS AND SQUARENESS. | |
| Door leaves - Method for measurement of height, width, thickness and squareness | |
| Door leaves. Determination of the resistance to hard body impact. | |
| DUCTILE IRON PIPES, FITTING ACCESORIES AND THEIR JOINTS FOR GAS PIPELINES. REQUIREMENTS AND TEST METHODS. | |
| DUCTILE IRON PIPES, FITTINGS ACCESSORIES AND THEIR JOINTS FOR GAS PIPELINES. REQUIREMENTS AND TEST METHODS. | |
| Ductile iron pipes, fittings, accessories and their joints for gas pipelines - Requirements and test methods | |
| FIBRE ROPES FOR GENERAL SERVICE. DETERMINATION OF CERTAIN PHYSICAL AND MECHANICAL PROPERTIES. | |
| Footwear manufacturing machines - Lasting machines - Safety requirements | |
| FOOTWEAR MANUFACTURING MACHINES. LASTING MACHINES. SAFETY REQUIREMENT. | |
| Footwear, leather and imitation leather goods manufacturing machines - Roughing, scouring, polishing and trimming machines - Safety requirements | |
| FOOTWEAR, LEATHER AND IMITATION LEATHER GOODS MANUFACTURING MACHINES. ROUGHING, SCOURING, POLISHING AND TRIMMING MACHINES. SAFETY REQUIREMENTS. | |
| Gas fired storage water heaters for the production of domestic hot water. | |
| GAS WELDING EQUIPMENT. MANIFOLD REGULATORS USED IN WELDING, CUTTING ANd allied processes up to 200 bar. | |
| GAS WELDING EQUIPMENT. OXYGEN/FUEL GAS BLOWPIPES (CUTTING MACHINE TYPE) of cylindrical barrel. Type of construction, general specifications, test methods. | |
| GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. DETERMINATION OF MASS PER UNIT AREA. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. DETERMINATION OF THICKNESS AT SPECIFIED PRESSURES. PART 1: SINGLE LAYERS. | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. DYNAMIC PERFORATION TEST (CONE DROP TEST). | |
| GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS. SAMPLING AND PREPARATION OF TEST SPECIMENS. | |
| GYMNASTIC EQUIPMENT - ASYMMETRIC BARS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. (Endorsed by AENOR in May of 1996.) | |
| Gymnastic equipment - Asymmetric bars - Requirements and test methods including safety | |
| GYMNASTIC EQUIPMENT - GENERAL SAFETY REQUIREMENTS AND TEST METHODS (Endorsed by AENOR in May of 1996.) | |
| Gymnastic equipment - General safety requirements and test methods | |
| GYMNASTIC EQUIPMENT - PARALLEL BARS AND COMBINATION ASYMMETRIC/PARALLEL BARS - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. (Endorsed by AENOR in May of 1996.) | |
| Gymnastic equipment - Parallel bars and combination asymmetric/parallel bars - Requirements and test methods including safety | |
| GYMNASTIC EQUIPMENT - VAULTING BOXES - FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. (Endorsed by AENOR in May of 1996.) | |
| Gymnastic equipment - Vaulting boxes - Requirements and test methods including safety. | |
| GYMNASTIC EQUIPMENT. ASYMMETRIC BARS. FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. | |
| GYMNASTIC EQUIPMENT. GENERAL SAFETY REQUIREMENTS AND TEST METHODS. | |
| GYMNASTIC EQUIPMENT. PARALLEL BARS AND COMBINATION ASYMMETRIC/PARALLEL BARS. FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. | |
| GYMNASTIC EQUIPMENT. VAULTING BOXES. FUNCTIONAL AND SAFETY REQUIREMENTS, TEST METHODS. | |
| HEAD PROTECTORS FOR ICE HOCKEY PLAYERS. | |
| HEADFORMS FOR USE IN THE TESTING OF PROTECTIVE HELMETS. | |
| Headforms for use in the testing of protective helmets | |
| HELMETS FOR AIRBORNE SPORTS. | |
| HELMETS FOR AIRBORNE SPORTS | |
| Hinged or pivoted doors - Determination of the resistance to static torsion | |
| HINGED OR PIVOTED DOORS - DETERMINATION OF THE RESISTANCE TO VERTICAL LOAD. | |
| HINGED OR PIVOTED DOORS - DETERMINATION OF THE RESISTANCE TO VERTICAL LOAD | |
| IN VITRO DIAGNOSTIC SYSTEMS. GUIDANCE ON THE APPLICATION OF EN 29001 And EN 46001 and of EN 29002 and EN 46002 for in vitro diagnostic medical devices. | |
| Inland navigation vessels - Push-tows - Mounting attachment for demountable signal masts | |
| LIGHT CONVEYOR BELTS. PRINCIPAL CHARACTERISTICS AND APPLICATIONS. | |
| MEDICAL ELECTRICAL EQUIPMENT. CAPNOMETERS FOR USE WITH HUMANS. PARTICULAR REQUIREMENTS. | |
| MOUNTAINEERING EQUIPMENT - CRAMPONS - SAFETY REQUIREMENTS AND TEST METHODS. | |
| Mountaineering equipment - Crampons - Safety requirements and test methods | |
| Mountaineering equipment - Dynamic mountaineering ropes - Safety requirements and test methods | |
| Mountaineering equipment - Energy absorbing systems for use in klettersteig (via ferrata) climbing - Safety requirements and test methods | |
| Mountaineering equipment - Rock anchors - Safety requirements and test methods | |
| MOUNTAINEERING EQUIPMENT. DYNAMIC MOUNTAINEERING ROPES. SAFETY REQUIREMENTS AND TEST METHODS. | |
| MOUNTAINEERING EQUIPMENT. ENERGY ABSORBING SYSTEMS FOR USE IN KLETTERSTEIG (VIA FERRATA) CLIMBING. SAFETY REQUIREMENTS AND TEST METHODS. | |
| MOUNTAINEERING EQUIPMENT. ROCK ANCHORS. SAFETY REQUIREMENTS AND TEST METHODS. | |
| Non-biological systems for use in sterilizers - Part 4: Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration. | |
| Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S... | |
| NON-BIOLOGICAL SYSTEMS FOR USE IN STERILIZERS. PART 1: GENERAL REQUIREMENTS. | |
| NON-BIOLOGICAL SYSTEMS FOR USE IN STERILIZERS. PART 2: PROCESS INDICATORS. (CLASS A). | |
| NON-BIOLOGICAL SYSTEMS FOR USE IN STERILIZERS. PART 3: SPECIFICATION FOR CLASS B INDICATORS FOR USE IN THE BOWIE AND DICK TEST. | |
| NON-BIOLOGICAL SYSTEMS FOR USE IN STERILIZERS. PART 3: SPECIFICATION FOR CLASS B. INDICATORS FOR USE IN THE BOWIE AND DICK TEST. | |
| NON-DESTRUCTIVE EXAMINATION OF FUSION WELDS. VISUAL EXAMINATION. | |
| Packaging - Child-resistant packaging - Requirements and testing procedures for non-reclosable packages for non-pharmaceutical products | |
| Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels... | |
| Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN 285 - Requirements and test methods | |
| Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods | |
| Packaging materials and systems for medical devices which are to be sterilized - Part 5: Heat and self-sealable pouches and reels of paper and plastic film construction. Requirements and test... | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 10: ADHESIVE COATED NONWOVEN MATERIALS OF POLYOLEFINES FOR USE IN THE MANUFACTURE OF HEAT SEALABLE POUCHES, REELS... | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 1: GENERAL REQUIREMENTS AND TEST METHODS. | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 2: STERILIZATION WRAP. REQUIREMENTS AND TEST METHODS. | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 3: PAPER FOR USE IN THE MANUFACTURE OF PAPER BAGS (SPECIFIED IN EN 868-4) AND IN THE... | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 4: PAPER BAGS. REQUIREMENTS AND TEST METHODS. | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 5: HEAT AND SELF-SEALABLE POUCHES AND REELS OF PAPER AND PLASTIC FILM CONSTRUCTION. REQUIREMENTS AND TEST METHODS. | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 6: PAPER FOR THE MANUFACTURE OF PACKS FOR MEDICAL USE FOR STERILIZATION BY ETHYLENE OXIDE OR IRRADIATION. | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 7: ADHESIVE COATED PAPER FOR THE MANUFACTURE OF HEAT SEALABLE PACKS FOR MEDICAL USE FOR STERILIZATION BY... | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 8: RE-USABLE STERILIZATION CONTAINERS FOR STEAM STERILIZERS CONFORMING TO EN 285. REQUIREMENTS AND TEST METHODS. | |
| PACKAGING MATERIALS AND SYSTEMS FOR MEDICAL DEVICES WHICH ARE TO BE STERILIZED. PART 9: UNCOATED NONWOVEN MATERIALS OF POLYOLEFINES FOR USE IN THE MANUFACTURE OF HEAT SEALABLE POUCHES, REELS AND... | |
| PACKAGING. CHILD-RESISTANT PACKAGING. REQUIREMENTS AND TESTING PROCEDURES FOR NON-RECLOSABLE PACKAGES FOR NON-PHARMACEUTICAL PRODUCTS. | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 10: Resistance to blocking of paints and varnishes on wood | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 11: Assessment of air inclusions/microfoam in coating films | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 13: Assessment of resistance to impact of a coating on a wooden substrate | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 14: Determination of tensile properties of coating films | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 1: Classification and selection | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification (Endorsed by AENOR in October of 2006.) | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 2: Performance specification | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test. | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 3: Natural weathering test | |
| PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 4: ASSESSEMENT OF THE WATER-VAPOUR PERMEABLILITY. | |
| PAINTS AND VARNISHES - COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD - PART 5: ASSESSEMENT OF THE LIQUID WATER PERMEABILILTY. | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 5: Assessment of the liquid water permeability | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 6: Exposure of wood coatings to artificial weathering using fluorescent UV lamps and water | |
| Paints and varnishes - Coating materials and coating systems for exterior wood - Part 7: Assessment of knot staining resistance of wood coatings | |
| PAINTS AND VARNISHES. COATING MATERIALS AND COATING SYSTEMS FOR EXTERIOR WOOD. PART 1: CLASSIFICATION AND SELECTION. | |
| PAINTS AND VARNISHES. TERMS AND DEFINITIONS FOR COATING MATERIALS. PART 1: GENERAL TERMS. | |
| Paper and board intended to come into contact with foodstuffs - Determination of dry matter content in an aqueous extract. | |
| PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS. DETERMINATION OF DRY MATTER CONTENT IN AN AQUEOUS EXTRACT. | |
| PAPER AND BOARD INTENDED TO COME INTO CONTACT WITH FOODSTUFFS. DETERMINATION OF WATER SOLUBLE MATTER. | |
| Paragliding equipment - Paragliders - Part 1: Requirements and test methods for structural strength | |
| Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics (Endorsed by AENOR in January of 2014.) | |
| Paragliding equipment - Paragliders - Part 2: Requirements and test methods for classifying flight safety characteristics | |
| PARAGLIDING EQUIPMENT. PARAGLIDERS. PART 1: REQUIREMENTS AND TEST METHODS FOR STRUCTURAL STRENGTH. (Endorsed by AENOR in June of 1995.) | |
| PARAGLIDING EQUIPMENT. PARAGLIDERS. PART 1: REQUIREMENTS AND TEST METHODS FOR STRUCTURAL STRENGTH. | |
| PLASTICS PIPING AND DUCTING SYSTEMS. PIPES AND FITTINGS OF UNPLASTICIZED POLY(VINYL CHLORIDE) (PVC-U). SPECIMEN PREPARATION FOR DETERMINATION OF THE VISCOSITY NUMBER AND CALCULATION OF THE K-VALUE. | |
| Plastics piping systems - Thermoplastics valves - Test methods for resistance to internal pressure and leaktightness | |
| PLASTICS PIPING SYSTEMS. ELASTOMERIC SEALING RING TYPE JOINTS AND MECHanical joints for thermoplastics pressure piping. Test method for leaktightness under external hydrostatic pressure. | |
| PLASTICS PIPING SYSTEMS. THERMOPLASTIC PIPES. DETERMINATION OF RESISTANCE TO INTERNAL PRESSURE AT CONSTANT TEMPERATURE. | |
| POLYOLEFIN AGRICULTURAL TWINES. | |
| PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSUPRES UP TO 200 MBAR. | |
| PRESSURE GOVERNORS FOR GAS APPLIANCES FOR INLET PRESSURES UP TO 200 MBAR. | |
| Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | |
| Pressure regulators and associated safety devices for gas appliances - Part 1: Pressure regulators for inlet pressures up to and including 500 mbar | |
| Pressure regulators and associated safety devices for gas appliances - Part 2: Pressure regulators for inlet pressures above 500 mbar up to and including 5 bar | |
| Programme Management - Configuration Management - Part 100: A guide for the application of the principles of configuration management (Endorsed by Asociación Española de Normalización in April of 2018.) | |
| Programme Management - Configuration Management - Part 101: Configuration identification (Endorsed by Asociación Española de Normalización in April of 2018.) | |
| Programme Management - Configuration Management - Part 102: Configuration status accounting (Endorsed by Asociación Española de Normalización in April of 2018.) | |
| Programme Management - Configuration Management - Part 103: Configuration Verifications, Reviews and Audits (Endorsed by Asociación Española de Normalización in April of 2018.) | |
| Programme Management - Configuration Management - Part 104: Configuration Control (Endorsed by Asociación Española de Normalización in April of 2018.) | |
| Programme Management - Configuration Management - Part 105: Glossary (Endorsed by Asociación Española de Normalización in April of 2018.) | |
| Programme Management - Definition Justification and Qualification - A guide to drawing up the definition justification plan and of the definition justification dossier (Endorsed by Asociación Española de Normalización in... | |
| Protective clothing - Mechanical properties - Test method: Puncture resistance | |
| Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits (Endorsed by AENOR in... | |
| Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for Type 1 (gas-tight) chemical protective suits (Endorsed by Asociación Española... | |
| Protective clothing against dangerous solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 2: Performance requirements for Type 1 (gas-tight) chemical protective suits for emergency teams (ET)... | |
| Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) and "non-gas-tight" (Type 2) chemical... | |
| Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 1: Performance requirements for ventilated and non-ventilated 'gas-tight' (Type 1) and 'non-gas-tight' (Type 2) chemical... | |
| Protective clothing against liquid and gaseous chemicals, including liquid aerosols and solid particles - Part 2: Performance requirements for "gas-tight" (Type 1) chemical protective suits for emergency teams (ET) | |
| PULSE OXIMETERS. PARTICULAR REQUIREMENTS. | |
| Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations (Endorsed by Asociación Española de Normalización in June of 2018.) | |
| Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organisations | |
| Quality Management Systems - Audit Requirements for Aviation, Space, and Defence Organizations | |
| Quality management systems - Guidance for the Application of AQAP 2110 within an EN 9100 Quality Management System | |
| Quality Management Systems - Requirements for Aviation Maintenance Organizations | |
| Quality Management Systems - Requirements for Aviation, Space and Defence Distributors | |
| Quality Management Systems - Requirements for Aviation, Space and Defence Organizations | |
| Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) (Endorsed by Asociación Española de Normalización in September of 2018.) | |
| Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) | |
| Quality Management Systems - Requirements for Aviation, Space and Defense Organizations | |
| Reciprocating internal combustion engine driven alternating current generating sets -- Part 11: Rotary uninterruptible power systems - Performance requirements and test methods (Endorsed by AENOR in October of 2004.) | |
| Safety and control devices for gas burners and gas burning appliances - Part 1: Pressure regulators for inlet pressures up to and including 50 kPa | |
| Safety and control devices for gas burners and gas burning appliances - Part 2: Pressure regulators for inlet pressures above 50 kPa up to and including 500 kPa | |
| Safety and control devices for gas burners and gas burning appliances - Part 3: Pressure and/or flow rate regulators for inlet pressures up to and including 500 kPa, electronic types... | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 1: General principles for human interactions with displays and control actuators | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 2: Displays | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators. | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators | |
| Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 4: Location and arrangement of displays and control actuators (Endorsed by AENOR in July... | |
| Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards | |
| Safety of machinery - Safety requirements for pressure metal diecasting units | |
| SAFETY OF MACHINERY. ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS. PART 1: GENERAL PRINCIPLES FOR HUMAN INTERACTIONS WITH DISPLAYS AND CONTROL ACTUATORS. | |
| SAFETY OF MACHINERY. ERGONOMICS REQUIREMENTS FOR THE DESIGN OF DISPLAYS AND CONTROL ACTUATORS. PART 2: DISPLAYS. | |
| SAFETY OF MACHINERY. GUARDS. GENERAL REQUIREMENTS FOR THE DESIGN AND CONSTRUCTION OF FIXED AND MOVABLE GUARDS. | |
| SAFETY OF MACHINERY. SAFETY-RELATED PARTS OF CONTROL SYSTEMS. PART 1: GENERAL PRINCIPLES FOR DESIGN. | |
| Safety of woodworking machines - Combined woodworking machines | |
| Safety of woodworking machines - Surface planing and thicknessing machines | |
| SAFETY OF WOODWORKING MACHINES. COMBINED WOODWORKING MACHINES. | |
| SAFETY REQUIREMENTS FOR HIGH PRESSURE METAL DIECASTING UNITS. | |
| Stationary training equipment - Part 10: Exercise bicycles with a fixed wheel or without freewheel, additional specific safety requirements and test methods | |
| STATIONARY TRAINING EQUIPMENT - PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS (Endorsed by AENOR in June of 1996.) | |
| Stationary training equipment - Part 1: General safety requirements and test methods | |
| STATIONARY TRAINING EQUIPMENT - PART 2: STRENGTH TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. (Endorsed by AENOR in June of 1996.) | |
| Stationary training equipment - Part 2: Strength training equipment, additional specific safety requirements and test methods | |
| STATIONARY TRAINING EQUIPMENT - PART 4: STRENGTH TRAINING BENCHES, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. (Endorsed by AENOR in June of 1996.) | |
| Stationary training equipment - Part 4: Strength training benches, additional specific safety requirements and test methods | |
| STATIONARY TRAINING EQUIPMENT - PART 5: PEDAL CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. (Endorsed by AENOR in June of 1996.) | |
| Stationary training equipment - Part 5: Stationary exercise bicycles and upper body crank training equipment, additional specific safety requirements and test methods | |
| Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods. | |
| Stationary training equipment - Part 6: Treadmills, additional specific safety requirements and test methods | |
| Stationary training equipment - Part 8: Steppers, stairclimbers and climbers - Additional specific safety requirements and test methods | |
| Stationary training equipment - Part 9: Elliptical trainers, additional specific safety requirements and test methods | |
| STATIONARY TRAINING EQUIPMENT. PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS (INCLUDING AMENDMENT 1:1998). | |
| STATIONARY TRAINING EQUIPMENT. PART 1: GENERAL SAFETY REQUIREMENTS AND TEST METHODS. | |
| STATIONARY TRAINING EQUIPMENT. PART 2: STRENGTH TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. | |
| STATIONARY TRAINING EQUIPMENT. PART 4: STRENGTH TRAINING BENCHES, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. | |
| STATIONARY TRAINING EQUIPMENT. PART 5: PEDAL CRANK TRAINING EQUIPMENT, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. | |
| STATIONARY TRAINING EQUIPMENT. PART 7: ROWING MACHINES, ADDITIONAL SPECIFIC SAFETY REQUIREMENTS AND TEST METHODS. | |
| Tannery machines - Reciprocating roller machines - Safety requirements | |
| TANNERY MACHINES. RECIPROCATING ROLLER MACHINES. SAFETY REQUIREMENTS. | |
| TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 1: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. SIEVING METHOD. | |
| TEST FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. TEST SIEVES, NOMINAL SIZE OF APERTURES. | |
| Tests for general properties of aggregates - Part 1: Methods for sampling | |
| Tests for general properties of aggregates - Part 2: Methods for reducing laboratory samples | |
| Tests for general properties of aggregates - Part 3: Procedure and terminology for simplified petrographic description | |
| Tests for general properties of aggregates - Part 5: Common equipment and calibration | |
| Tests for general properties of aggregates - Part 6: Definitions of repeatability and reproducibility | |
| TESTS FOR GENERAL PROPERTIES OF AGGREGATES. PART 5: COMMON EQUIPMENT AND CALIBRATION. | |
| Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of filler aggregates (air jet sieving) | |
| Tests for geometrical properties of aggregates - Part 10: Assessment of fines - Grading of fillers (air jet sieving). | |
| Tests for geometrical properties of aggregates - Part 11: Classification test for the constituents of coarse recycled aggregate | |
| Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method | |
| Tests for geometrical properties of aggregates - Part 2: Determination of particle size distribution - Test sieves, nominal size of apertures | |
| Tests for geometrical properties of aggregates - Part 3: Determination of particle shape - Flakiness index | |
| Tests for geometrical properties of aggregates - Part 4: Determination of particle shape - Shape index | |
| Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed and broken surfaces in coarse aggregate particles | |
| Tests for geometrical properties of aggregates - Part 5: Determination of percentage of crushed particles in coarse and all-in natural aggregates | |
| Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates. | |
| Tests for geometrical properties of aggregates - Part 6: Assessment of surface characteristics - Flow coefficient of aggregates | |
| Tests for geometrical properties of aggregates - Part 7: Determination of shell content - Percentage of shells in coarse aggregates | |
| Tests for geometrical properties of aggregates - Part 8: Assessment of fines - Sand equivalent test | |
| TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES - PART 9: ASSESSMENT OF FINES - METHYLENE BLUE TEST | |
| TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 3: DETERMINATION OF PARTICLE SHAPE. FLAKINESS INDEX. | |
| TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 4: DETERMINATION OF PARTICLE SHAPE. SHAPE INDEX. | |
| TESTS FOR GEOMETRICAL PROPERTIES OF AGGREGATES. PART 8: ASSESSMENT OF FINES. SAND EQUIVALENT TEST. | |
| Timber fasteners - Specifications for connectors for timber. | |
| TIMBER FASTENERS - SPECIFICATIONS FOR CONNECTORS FOR TIMBER | |
| Timber fasteners - Specifications for connectors for timbers | |
| Timber in joinery - General requirements | |
| TIMBER IN JOINERY. GENERAL CLASSIFICATION OF TIMBER QUALITY. | |
| Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests. | |
| TRANSPORTABLE GAS CYLINDERS. VALVE PROTECTION CAPS AND VALVE GUARDS FOR INDUSTRIAL AND MEDICAL GAS CYLINDERS. DESIGN, CONSTRUCTION AND TESTS. | |
| Water quality - Determination of anionic surfactants by measurement of the methylene blue index MBAS (ISO 7875-1:1984 modified) | |
| Water quality - Determination of suspended solids - Method by filtration through glass fibre filters | |
| WATER QUALITY. DETERMINATION OF SUSPENDED SOLIDS. METHOD BY FILTRATION THROUGH GLASS FIBRE FILTERS. | |
| WINDOWS AND CURTAIN WALLING, DOORS, BLINDS AND SHUTTERS - DETERMINATION OF THE RESISTANCE TO SOFT AND HEAVY BODY IMPACT FOR DOORS. | |
| WINDOWS AND CURTAIN WALLING, DOORS, BLINDS AND SHUTTERS - DETERMINATION OF THE RESISTANCE TO SOFT AND HEAVY BODY IMPACT FOR DOORS |
| << Prev | Next >> |