AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
80
90
100
110
120
130
139
140
141
142
143
144
145
146
147
148
149
150
151
160
170
180
181
| Product Name | Notes |
|---|---|
| Aerospace series - Architecture for integrated management of a system's health condition (Endorsed by Asociación Española de Normalización in December of 2023.) | |
| Analogue audio disk records and reproducing equipment (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Appliance couplers for household and similar general purposes - Part 1: General requirements | |
| Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers | |
| Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPX0 | |
| Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement | |
| Ball and socket couplings of string insulator units - Dimensions | |
| Carbon brushes, brush holders, commutators and slip-rings - Definitions and nomenclature (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Chemicals used for treatment of water intended for human consumption - Phosphoric acid | |
| Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers. | |
| Chemicals used for treatment of water intended for human consumption - Sodium chloride for regeneration of ion exchangers | |
| CHEMICALS USED FOR TREATMENT OF WATER INTENDED FOR HUMAN CONSUMPTION. PHOSPHORIC ACID. | |
| Conductors of insulated cables | |
| Conventions concerning electric circuits (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Coupling capacitors and capacitor dividers - Part 1: General rules (Endorsed by Asociación Española de Normalización in April of 2026.) | |
| Coupling capacitors and capacitor dividers - Part 4: DC and AC single-phase capacitor dividers (Endorsed by Asociación Española de Normalización in January of 2019.) | |
| Dense shaped refractory products - Methods of test - Part 16: Determination of resistance to sulphuric acid | |
| Dependability management - Part 1: Managing dependability (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| Dependability management - Part 3-10: Application guide - Maintainability and maintenance (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Dependability management - Part 3-14: Application guide - Supportability and support (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| Dependability management - Part 3-4: Application guide - Specification of dependability requirements (Endorsed by Asociación Española de Normalización in June of 2022.) | |
| Designation of phase differences by hour numbers in three-phase AC systems (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Determination of the bond behaviour between reinforcing bars and autoclaved aerated concrete by the the "Push-Out" test | |
| Determination of the dimension of prefabricated reinforced components made of autoclaved aerated concrete or lightweight aggregate concrete with open structure | |
| Determination of the dry density of lightweight aggregate concrete with open structure | |
| DETERMINATION OF THE MASS PER UNIT AREA OF THE USE SURFACE OF NEEDLED FLOOR COVERINGS. | |
| Dimensions and output series for rotating electrical machines - Part 2: Frame numbers 355 to 1 000 and flange numbers 1 180 to 2 360 (Endorsed by Asociación Española de... | |
| Dimensions, marking and testing of carbon brushes and dimensions of brush-holders for electrical machinery (Endorsed by Asociación Española de Normalización in July of 2024.) | |
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 2: Special requirements for ammeters and voltmeters (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 3: Special requirements for wattmeters and varmeters (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 5: Special requirements for phase meters, power factor meters and synchroscopes (Endorsed by Asociación Española de Normalización in... | |
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 6: Special requirements for ohmmeters (impedance meters) and conductance meters (Endorsed by Asociación Española de Normalización in May... | |
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 7: Special requirements for multi-function instruments (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 8: Special requirements for accessories (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Direct acting indicating analogue electrical measuring instruments and their accessories - Part 9: Recommended test methods (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Direct acting indicating analogue electrical measuring instruments and their accessories title - Part 4: Special requirements for frequency meters (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Edison screw lampholders (Endorsed by Asociación Española de Normalización in January of 2022.) | |
| Edison screw lampholders (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Edison screw lampholders (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Edison screw lampholders (Endorsed by Asociación Española de Normalización in September of 2018.) | |
| Electric and hybrid electric road vehicles - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz (Endorsed by Asociación Española de... | |
| Electric irons for household or similar use - Methods for measuring performance | |
| Electrical insulating materials - Thermal endurance properties - Part 1: Ageing procedures and evaluation of test results (Endorsed by Asociación Española de Normalización in March of 2026.) | |
| Electrical insulating materials - Thermal endurance properties - Part 3: Instructions for calculating thermal endurance characteristics (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Electrical insulating materials - Thermal endurance properties - Part 5: Determination of relative temperature index (RTI) of an insulating material (Endorsed by Asociación Española de Normalización in February of 2023.)... | |
| Electrical insulating materials - Thermal endurance properties - Part 6: Determination of thermal endurance indices (TI and RTI) of an insulating material using the fixed time frame method (Endorsed by... | |
| Electroacoustics - Hearing aids - Part 0: Measurement of the performance characteristics of hearing aids (Endorsed by Asociación Española de Normalización in June of 2024.) | |
| Electroacoustics - Hearing aids - Part 13: Requirements and methods of measurement for electromagnetic immunity to mobile digital wireless devices (Endorsed by Asociación Española de Normalización in May of 2020.)... | |
| Electroacoustics - Hearing aids - Part 16: Definition and verification of hearing aid features (Endorsed by Asociación Española de Normalización in June of 2022.) | |
| Electroacoustics - Hearing aids - Part 4: Induction-loop systems for hearing aid purposes - System performance requirements | |
| Electroacoustics - Hearing aids - Part 9: Methods of measurement of the performance characteristics of bone conduction hearing aids | |
| Electroacoustics - Simulators of human head and ear - Part 7: Head and torso simulator for the measurement of sound sources close to the ear (Endorsed by Asociación Española de... | |
| Electroacoustics - Simulators of human head and ear - Part 8: Acoustic coupler for high-frequency measurements of hearing aids and earphones coupled to the ear by means of ear inserts... | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission | |
| Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard | |
| Environmental testing - Part 2-11: Tests - Test Ka: Salt mist (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Environmental testing - Part 2-13: Tests - Test M: Low air pressure (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Environmental testing - Part 2-14: Tests - Test N: Change of temperature (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Environmental testing - Part 2-17: Tests - Test Q: Sealing (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Environmental testing - Part 2-1: Tests - Test A: Cold (Endorsed by Asociación Española de Normalización in December of 2025.) | |
| Environmental testing - Part 2-20: Tests - Test Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads (Endorsed by Asociación Española de Normalización... | |
| Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral mounting devices (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Environmental testing - Part 2-2: Tests - Test B: Dry heat (Endorsed by Asociación Española de Normalización in December of 2025.) | |
| Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) (Endorsed by Asociación Española de Normalización in November of 2025.) | |
| Environmental testing - Part 2-38: Tests - Test Z/AD: Composite temperature/humidity cyclic test (Endorsed by Asociación Española de Normalización in June of 2021.) | |
| Environmental testing - Part 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) | |
| Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering (Endorsed by Asociación Española de Normalización in... | |
| Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state (Endorsed by Asociación Española de Normalización in November of 2025.) | |
| Environmental testing - Part 2-82: Tests - Test XW1: Whisker test methods for components and parts used in electronic assemblies (Endorsed by Asociación Española de Normalización in August of 2019.)... | |
| Environmental testing - Part 2-83: Tests - Test tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste (Endorsed by Asociación... | |
| Environmental testing - Part 2-85: Tests - Test Fj: Vibration - Long time history replication (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Environmental testing - Part 2-86: Tests - Test Fx: Vibration - Multi-exciter and multi-axis method (Endorsed by Asociación Española de Normalización in May of 2024.) | |
| Environmental testing - Part 2-87: Tests - UV-C exposure of materials and components to simulate ultraviolet germicidal Irradiation or other applications (Endorsed by Asociación Española de Normalización in December of... | |
| Environmental testing - Part 2-88: Tests – Test XD: Resistance of components and assemblies to liquid cleaning media (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Environmental testing - Part 3-14: Supporting documentation and guidance - Developing a climatic sequential test (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Environmental testing - Part 3-1: Supporting documentation and guidance - Cold and dry heat tests (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Environmental testing - Part 3-3: Supporting documentation and guidance - Seismic test methods for equipment (Endorsed by Asociación Española de Normalización in November of 2021.) | |
| Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in June of 2018.) | |
| Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Environmental testing - Part 3-7: Supporting documentation and guidance - Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load) (Endorsed by Asociación Española de Normalización... | |
| Explosive atmospheres - Part 0: Equipment - General requirements | |
| Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres | |
| Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" | |
| Explosive atmospheres - Part 14: Electrical installation design, selection and installation of equipment, including initial inspection | |
| Explosive atmospheres - Part 15: Equipment protection by type of protection "n" | |
| Explosive atmospheres - Part 17: Electrical installations inspection and maintenance | |
| Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation | |
| Explosive atmospheres - Part 25: Intrinsically safe electrical systems | |
| Explosive atmospheres - Part 26: Equipment with separation elements or combined Levels of Protection | |
| Explosive atmospheres - Part 29-0: Gas detection equipment - General requirements and test methods (Endorsed by Asociación Española de Normalización in March of 2026.) | |
| Explosive atmospheres - Part 31: Equipment dust ignition protection by enclosure "t" | |
| Explosive atmospheres - Part 45: Electrical ignition systems for internal combustion engines (Endorsed by Asociación Española de Normalización in January of 2026.) | |
| Explosive atmospheres - Part 7: Equipment protection by increased safety "e" | |
| Fixed capacitors for use in electronic equipment - Part 1-1: Generic blank detail specification (Endorsed by Asociación Española de Normalización in October of 2022.) | |
| Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terepht halate film dielectric metal foil DC capacitors (Endorsed by Asociación Española de Normalización in June... | |
| Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terepht halate film dielectric metal foil DC capacitors (Endorsed by Asociación Española de Normalización in November... | |
| Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil DC capacitors (Endorsed by Asociación Española de Normalización in February of... | |
| Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ... | |
| Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only... | |
| Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains (Endorsed by Asociación Española de... | |
| Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors (Endorsed by Asociación Española de Normalización in December of 2019.)... | |
| Fixed capacitors for use in electronic equipment - Part 16: Sectional specification - Fixed metallized polypropylene film dielectric DC capacitors (Endorsed by Asociación Española de Normalización in February of 2021.)... | |
| Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric AC and pulse capacitors (Endorsed by Asociación Española de Normalización in February... | |
| Fixed capacitors for use in electronic equipment - Part 17: Sectional specification - Fixed metallized polypropylene film dielectric AC and pulse capacitors (Endorsed by Asociación Española de Normalización in June... | |
| Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene terephthalate film dielectric surface mount DC capacitors (Endorsed by Asociación Española de Normalización in October... | |
| Fixed capacitors for use in electronic equipment - Part 1: Generic specification (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount DC capacitors (Endorsed by Asociación Española de Normalización in... | |
| Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1 (Endorsed by Asociación Española de Normalización in... | |
| Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 (Endorsed by Asociación Española de Normalización in... | |
| Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount DC capacitors (Endorsed by Asociación Española de Normalización in... | |
| Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización... | |
| Fixed capacitors for use in electronic equipment - Part 25: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización... | |
| Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in... | |
| Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in June... | |
| Fixed capacitors for use in electronic equipment - Part 26: Sectional specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte (Endorsed by Asociación Española de Normalización in September... | |
| Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terepht halate film dielectric DC capacitors (Endorsed by Asociación Española de Normalización in July of... | |
| Fixed capacitors for use in electronic equipment - Part 8: Sectional specification - Fixed capacitors of ceramic dielectric, class 1 (Endorsed by Asociación Española de Normalización in November of 2024.)... | |
| Fixed capacitors for use in electronic equipment - Part 9: Sectional specification - Fixed capacitors of ceramic dielectric, class 2 (Endorsed by Asociación Española de Normalización in November of 2024.)... | |
| Fluids for electrotechnical applications - Mineral insulating oils for electrical equipment | |
| GRAPHICAL SYMBOLS FOR USE IN THE LABELLING OF MEDICAL DEVICES. | |
| Graphical symbols for use in the labelling of medical devices | |
| High-voltage fuses - Part 1: Current-limiting fuses | |
| High-voltage fuses - Part 4: additional testing requirements for high-voltage expulsion fuses utilizing polymeric insulators | |
| Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides | |
| Household and similar electrical appliances - Safety - Part 1: General requirements | |
| Household and similar electrical appliances - Safety - Part 2-102: Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections | |
| Household and similar electrical appliances - Safety - Part 2-103: Particular requirements for drives for gates, doors and windows | |
| Household and similar electrical appliances - Safety - Part 2-105: Particular requirements for multifunctional shower cabinets | |
| Household and similar electrical appliances - Safety - Part 2-110: Particular requirements for commercial microwave appliances with insertion or contacting applicators | |
| Household and similar electrical appliances - Safety - Part 2-111: Particular requirements for electric ondol mattress with a non-flexible heated part | |
| Household and similar electrical appliances - Safety - Part 2-113: Particular requirements for cosmetic and beauty care appliances incorporating lasers and intense light sources | |
| Household and similar electrical appliances - Safety - Part 2-115: Particular requirements for skin beauty care appliances | |
| Household and similar electrical appliances - Safety - Part 2-119: Particular requirements for commercial vacuum packaging appliances (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| Household and similar electrical appliances - Safety - Part 2-11: Particular requirements for tumble dryers | |
| Household and similar electrical appliances - Safety - Part 2-14: Particular requirements for kitchen machines | |
| Household and similar electrical appliances - Safety - Part 2-23: Particular requirements for appliances for skin or hair care | |
| Household and similar electrical appliances - Safety - Part 2-24: Particular requirements for refrigerating appliances, ice-cream appliances and ice makers | |
| Household and similar electrical appliances - Safety - Part 2-25: Particular requirements for microwave ovens, including combination microwave ovens | |
| Household and similar electrical appliances - Safety - Part 2-26: Particular requirements for clocks (Endorsed by Asociación Española de Normalización in March of 2026.) | |
| Household and similar electrical appliances - Safety - Part 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliances | |
| Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances (Endorsed by Asociación Española de Normalización in March of 2026.) | |
| Household and similar electrical appliances - Safety - Part 2-32: Particular requirements for massage appliances | |
| Household and similar electrical appliances - Safety - Part 2-34: Particular requirements for motor-compressors | |
| Household and similar electrical appliances - Safety - Part 2-36: Particular requirements for commercial electric cooking ranges, ovens, hobs and hob elements | |
| Household and similar electrical appliances - Safety - Part 2-37: Particular requirements for commercial electric doughnut fryers and deep fat fryers | |
| Household and similar electrical appliances - Safety - Part 2-39: Commercial electric multi-purpose cooking pans | |
| Household and similar electrical appliances - Safety - Part 2-39: Particular requirements for commercial electric multi-purpose cooking pans | |
| Household and similar electrical appliances - Safety - Part 2-40: Particular requirements for electrical heat pumps, air-conditioners and dehumidifiers | |
| Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps | |
| Household and similar electrical appliances - Safety - Part 2-43: Particular requirements for clothes dryers and towel rails | |
| Household and similar electrical appliances - Safety - Part 2-4: Particular requirements for spin extractors | |
| Household and similar electrical appliances - Safety - Part 2-51: Particular requirements for stationary circulation pumps for heating and service water installations | |
| Household and similar electrical appliances - Safety - Part 2-60: Particular requirements for whirlpool baths and whirlpool spas | |
| Household and similar electrical appliances - Safety - Part 2-62: Particular requirements for commercial electric rinsing sinks | |
| Household and similar electrical appliances - Safety - Part 2-71: Particular requirements for electrical heating appliances for breeding and rearing animals | |
| Household and similar electrical appliances - Safety - Part 2-75: Particular requirements for commercial dispensing appliances and vending machines | |
| Household and similar electrical appliances - Safety - Part 2-76: Particular requirements for electric fence energizers | |
| Household and similar electrical appliances - Safety - Part 2-7: Particular requirements for washing machines | |
| Household and similar electrical appliances - Safety - Part 2-80: Particular requirements for fans | |
| Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats | |
| Household and similar electrical appliances - Safety - Part 2-82: Particular requirements for amusement machines and personal service machines | |
| Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances | |
| Household and similar electrical appliances - Safety - Part 2-86: Particular requirements for electric fishing machines (Endorsed by Asociación Española de Normalización in January of 2024.) | |
| Household and similar electrical appliances - Safety - Part 2-87: Particular requirements for electrical animal-stunning equipment | |
| Household and similar electrical appliances - Safety - Part 2-89: Particular requirements for commercial refrigerating appliances and ice-makers with an incorporated or remote refrigerant unit or motor-compressor | |
| Household and similar electrical appliances - Safety - Part 2-90: Particular requirements for commercial microwave ovens | |
| Household and similar electrical appliances - Safety - Part 2-95: Particular requirements for drives for vertically moving garage doors for residential use | |
| Household and similar electrical appliances - Safety - Part 2-96: Particular requirements for flexible sheet heating elements for room heating | |
| Household and similar electrical appliances - Safety - Part 2-97: Particular requirements for drives for shutters, awnings, blinds and similar equipment | |
| Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances | |
| Household electric cooking appliances - Part 1: Ranges, ovens, steam ovens and grills - Methods for measuring performance | |
| Hydraulic turbines - Testing of governing systems (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Impulse tests on cables and their accessories | |
| Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement (Endorsed by Asociación Española de Normalización in August of 2025.) | |
| Insulation co-ordination - Part 11: Definitions, principles and rules for HVDC system (Endorsed by Asociación Española de Normalización in January of 2024.) | |
| Insulation co-ordination - Part 11:Definitions, principles and rules for HVDC system | |
| Insulation co-ordination - Part 12: Application guidelines for LCC HVDC converter stations (Endorsed by Asociación Española de Normalización in January of 2023.) | |
| Insulation co-ordination - Part 1: Definitions, principles and rules | |
| Insulation co-ordination - Part 2: Application guidelines | |
| Insulators for overhead lines with a nominal voltage above 1 000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria... | |
| Insulators for overhead lines with a nominal voltage above 1000 V - Ceramic or glass insulator units for AC systems - Characteristics of insulator units of the cap and pin... | |
| Letter symbols to be used in electrical technology - Part 2: Telecommunications and electronics (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment | |
| Locking devices for ball and socket couplings of string insulator units - Dimensions and tests | |
| Low-voltage fuses - Part 7: Supplementary Requirements for fuse-links for the protection of batteries and battery systems | |
| Magnetic materials - Part 11: Methods of measurement of the surface insulation resistance of electrical steel strip and sheet (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Magnetic materials - Part 12: Methods of test for the assessment of the thermal endurance of surface insulation coatings on electrical steel strip and sheet (Endorsed by Asociación Española de... | |
| Measuring relays and protection equipment - Part 181: Functional requirements for frequency protection (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Measuring relays and protection equipment - Part 187-1: Functional requirements for differential protection - Restrained and unrestrained differential protection of motors, generators and transformers (Endorsed by Asociación Española de Normalización... | |
| Measuring relays and protection equipment - Part 1: Common requirements | |
| Measuring relays and protection equipment - Part 26: Electromagnetic compatibility requirements (Endorsed by Asociación Española de Normalización in May of 2025.) | |
| Measuring relays and protection equipment - Part 27: Product safety requirements (Endorsed by Asociación Española de Normalización in May of 2025.) | |
| Mechanical standardization of semiconductor devices - Part 1: General rules for the preparation of outline drawings of discrete devices (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Mechanical structures for electrical and electronic equipment - Dimensions of mechanical structures of the 482,6 mm (19 in) series - Part 3-110: Residential racks and cabinets for smart houses (Endorsed... | |
| Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics (Endorsed by Asociación Española de Normalización in August of 2022.) | |
| Medical electrical equipment - X-ray tube assemblies for medical diagnosis - Focal spot dimensions and related characteristics (Endorsed by Asociación Española de Normalización in March of 2021.) | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Endorsed by Asociación Española de Normalización in January of 2021.) | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Methods for measuring the performance of electric storage water heaters for household purposes | |
| Methods of test for (dense) shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature (Endorsed by Asociación Española de Normalización in January of 2019.) | |
| Methods of test for dense shaped refractory products - Determination of thermal conductivity by the hot-wire (parallel) method | |
| Methods of test for dense shaped refractory products - Part 10: Determination of permanent change in dimensions on heating (Endorsed by Asociación Española de Normalización in November of 2020.) | |
| Methods of test for dense shaped refractory products - Part 11: Determination of resistance to thermal shock | |
| Methods of test for dense shaped refractory products - Part 13: Specification for pyrometric reference cones for laboratory use | |
| Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum | |
| Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum. | |
| Methods of test for dense shaped refractory products - Part 19: Determination of thermal expansion by a differential method | |
| Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity (Endorsed by Asociación Española de Normalización in January of 2019.)... | |
| Methods of test for dense shaped refractory products - Part 1: Determination of bulk density, apparent porosity and true porosity | |
| Methods of test for dense shaped refractory products - Part 2 : Determination of true density | |
| Methods of test for dense shaped refractory products - Part 20: Determination of resistance to abrasion at ambient temperature | |
| Methods of test for dense shaped refractory products - Part 2: Determination of true density | |
| Methods of test for dense shaped refractory products - Part 3: Test methods for carbon-containing refractories | |
| Methods of test for dense shaped refractory products - Part 4: Determination of permeability to gases | |
| Methods of test for dense shaped refractory products - Part 5: Determination of cold crushing strength (Endorsed by Asociación Española de Normalización in January of 2019.) | |
| METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 5: DETERMINATION OF COLD CRUSHING STRENGTH | |
| Methods of test for dense shaped refractory products - Part 6: Determination of modulus of rupture at ambient temperature | |
| METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS - PART 7: DETERMINATION OF MODULUS OF RUPTURE AT ELEVATED TEMPERATURES | |
| METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 10: DETERMINATION OF PERMANENT CHANGE IN DIMENSIONS ON HEATING. | |
| METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 12: DETERMINATION OF PYROMETRIC CONE EQUIVALENT (REFRACTORINESS). | |
| METHODS OF TEST FOR DENSE SHAPED REFRACTORY PRODUCTS. PART 15: DETERMINATION OF THERMAL CONDUCTIVITY BY THE HOT-WIRE (PARALLEL) METHOD. | |
| Methods of testing dense shaped refractory products - Part 9: Determination of creep in compression | |
| METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS. PART 14: DETERMINATION OF THERMAL CONDUCTIVITY BY THE HOT-WIRE (CROSS-ARRAY) METHOD. | |
| METHODS OF TESTING DENSE SHAPED REFRACTORY PRODUCTS. PART 8: DETERMINATION OF REFRACTORINESS-UNDER -LOAD. | |
| Miniature fuses - Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Miniature fuses - Part 6: Fuse-holders for miniature fuse-links (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Miniature fuses - Part 8: Fuse resistors with particular overcurrent protection (Endorsed by Asociación Española de Normalización in October of 2024.) | |
| Miniature fuses - Part 9: Miniature fuse-links for special applications with partial-range breaking capacity (Endorsed by Asociación Española de Normalización in November of 2025.) | |
| Packaging of components for automatic handling - Part 2: Tape packaging of components with unidirectional leads on continuous tapes (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in April of 2019.) | |
| Packaging of components for automatic handling - Part 3: Packaging of surface mount components on continuous tapes (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Packaging of components for automatic handling - Part 5: Matrix trays (Endorsed by Asociación Española de Normalización in July of 2018.) | |
| PILING EQUIPMENT - SAFETY REQUIREMENTS. | |
| Piling equipment - Safety requirements | |
| PILING EQUIPMENT. SAFETY REQUIREMENTS. | |
| Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 1: General requirements | |
| Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 2: Dimensional compatibility requirements for pin and contact-tube accessories | |
| Plugs, fixed or portable socket-outlets and appliance inlets for industrial purposes - Part 4: Switched socket-outlets with or without interlock | |
| Plugs, socket-outlets and couplers for industrial purposes - Part 5: Dimensional compatibility and interchangeability requirements for plugs, socket-outlets, ship connectors and ship inlets for low-voltage shore connection systems (LVSC) | |
| Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary precision potentiometers (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Potentiometers for use in electronic equipment - Part 3: Sectional specification: Rotary precision potentiometers (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Potentiometers for use in electronic equipment - Part 4: Sectional specification: Single-turn rotary power potentiometers (Endorsed by Asociación Española de Normalización in January of 2024.) | |
| Power transformers - Part 11: Dry-type transformers | |
| Power transformers - Part 19-1: Rules for the determination of uncertainties in the measurement of the losses of power transformers | |
| Power transformers - Part 22-1: Power transformer and reactor fittings – Protective devices | |
| Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators | |
| Power transformers - Part 22-3: Power transformer and reactor fittings - Insulating liquid to air heat exchangers | |
| Power transformers - Part 22-4: Power transformer and reactor fittings - Insulating liquid to water heat exchangers | |
| Power transformers - Part 22-5: Power transformer and reactor fittings - Electric pumps for transformers (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Power transformers - Part 22-6: Power transformer and reactor fittings - Electric fans for transformers (Endorsed by Asociación Española de Normalización in May of 2021.) | |
| Power transformers - Part 22-7: Power transformer and reactor fittings - Accessories and fittings | |
| Power transformers - Part 22-8: Power transformer and reactor fittings - Devices suitable for use in communication networks (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Power transformers - Part 24: Specification of Voltage Regulating Distribution Transformers (VRDT) | |
| Power transformers - Part 25: Neutral grounding resistors | |
| Primary batteries - Part 1: General (Endorsed by Asociación Española de Normalización in August of 2022.) | |
| Primary batteries - Part 1: General (Endorsed by Asociación Española de Normalización in July of 2021.) | |
| Primary batteries - Part 2: Physical and electrical specifications (Endorsed by Asociación Española de Normalización in August of 2022.) | |
| Primary batteries - Part 2: Physical and electrical specifications (Endorsed by Asociación Española de Normalización in July of 2021.) | |
| Primary batteries - Part 3: Watch batteries (Endorsed by Asociación Española de Normalización in August of 2023.) | |
| Primary batteries - Part 3: Watch batteries (Endorsed by Asociación Española de Normalización in July of 2021.) | |
| Primary batteries - Part 4: Safety of lithium batteries (Endorsed by Asociación Española de Normalización in April of 2025.) | |
| Primary batteries - Part 4: Safety of lithium batteries (Endorsed by Asociación Española de Normalización in August of 2019.) | |
| Primary batteries - Part 4: Safety of lithium batteries (Endorsed by Asociación Española de Normalización in December of 2019.) | |
| Primary batteries - Part 4: Safety of lithium batteries (Endorsed by Asociación Española de Normalización in June of 2020.) | |
| Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (Endorsed by Asociación Española de Normalización in August of 2022.) | |
| Primary batteries - Part 5: Safety of batteries with aqueous electrolyte (Endorsed by Asociación Española de Normalización in December of 2021.) | |
| Primary batteries - Part 6: Guidance on environmental aspects (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Quartz crystal units of assessed quality - Part 2: Guidelines for the use (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Railway applications - Electric equipment for rolling stock - Part 3: Electrotechnical components - Rules for DC circuit-breakers | |
| Railway applications - Electric equipment for rolling stock - Part 4: Electrotechnical components - Rules for AC circuit-breakers | |
| Railway applications - Electric equipment for rolling stock - Part 5: Electrotechnical components - Rules for HV fuses | |
| Rotating electrical machines - Dimensions and output series - Part 1: Frame numbers 56 to 400 and flange numbers 55 to 1080 (Endorsed by Asociación Española de Normalización in June... | |
| Rotating electrical machines - Part 11: Thermal protection (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Rotating electrical machines - Part 12: Starting performance of single-speed three-phase cage induction motors (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity (Endorsed by Asociación Española... | |
| Rotating electrical machines - Part 18-1: Functional evaluation of insulation systems - General guidelines (Endorsed by Asociación Española de Normalización in March of 2023.) | |
| Rotating electrical machines - Part 18-32: Functional evaluation of insulation systems (Type II) - Electrical endurance qualification procedures for form-wound windings (Endorsed by Asociación Española de Normalización in April of... | |
| Rotating electrical machines - Part 2-1: Standard methods for determining losses and efficiency from tests (excluding machines for traction vehicles) (Endorsed by Asociación Española de Normalización in June of 2024.)... | |
| Rotating electrical machines - Part 2-2: Specific methods for determining separate losses of large machines from tests - Supplement to IEC 60034-2-1 (Endorsed by Asociación Española de Normalización in June... | |
| Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors (Endorsed by Asociación Española de Normalización in June of 2020.) | |
| Rotating electrical machines - Part 2-3: Specific test methods for determining losses and efficiency of converter-fed AC motors (Endorsed by Asociación Española de Normalización in June of 2024.) | |
| Rotating electrical machines - Part 23: Repair, overhaul and reclamation (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Rotating electrical machines - Part 26: Effects of unbalanced voltages on the performance of three-phase cage induction motors (Endorsed by Asociación Española de Normalización in April of 2026.) | |
| Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation | |
| Rotating electrical machines - Part 27-2: On-line partial discharge measurements on the stator winding insulation (Endorsed by Asociación Española de Normalización in February of 2024.) | |
| Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index on winding insulation of rotating electrical machines (Endorsed by Asociación Española de Normalización in August of 2018.)... | |
| Rotating electrical machines - Part 30-1: Efficiency classes of line operated AC motors (IE code) (Endorsed by Asociación Española de Normalización in March of 2026.) | |
| Rotating electrical machines - Part 30-3: Efficiency classes of high voltage AC motors (IE-code) (Endorsed by Asociación Española de Normalización in May of 2024.) | |
| Rotating electrical machines - Part 33: Synchronous hydrogenerators including motor-generators - Specific requirements (Endorsed by Asociación Española de Normalización in April of 2022.) | |
| Rotating electrical machines - Part 3: Specific requirements for synchronous generators driven by steam turbines or combustion gas turbines and for synchronous compensators (Endorsed by Asociación Española de Normalización in... | |
| Rotating electrical machines - Part 4-1: Methods for determining electrically excited synchronous machine quantities from tests (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (Endorsed by Asociación Española de Normalización in July... | |
| Rotating electrical machines - Part 5: Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification (Endorsed by Asociación Española de Normalización in March... | |
| Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) (Endorsed by Asociación Española de Normalización in May of 2022.) | |
| Rotating electrical machines - Part 7: Classification of types of construction, mounting arrangements and terminal box position (IM Code) (Endorsed by Asociación Española de Normalización in May of 2023.) | |
| Rotating electrical machines - Part 9: Noise limits (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Safety of machinery - Electrical equipment of machines - Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36... | |
| Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines (Endorsed by Asociación Española de Normalización in July of 2025.) | |
| Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics | |
| Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics | |
| Safety of machinery - System of auditory and visual danger and information signals | |
| SAFETY OF MACHINERY - THE POSITIONING OF PROTECTIVE EQUIPMENT IN RESPECT OF APPROACH SPEEDS OF PARTS OF THE HUMAN BODY. | |
| Safety of machinery - The positioning of protective equipment in respect of approach speeds of parts of the human body | |
| SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. HYDRAULICS. | |
| SAFETY OF MACHINERY. SAFETY REQUIREMENTS FOR FLUID POWER SYSTEMS AND THEIR COMPONENTS. PNEUMATICS. | |
| SAFETY OF MACHINERY. SYSTEM OF AUDITORY AND VISUAL DANGER AND INFORMATION SIGNALS. | |
| Sawn timber - Appearance grading of hardwoods - Part 1: Oak and beech | |
| Sawn timber - Appearance grading of hardwoods - Part 2: Poplars | |
| SAWN TIMBER. APPEARANCE GRADING OF HARDWOODS. PART 1: OAK AND BEECH. | |
| Scales and sizes for plotting frequency characteristics and polar diagrams (Endorsed by Asociación Española de Normalización in October of 2020.) | |
| Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements (Endorsed by Asociación Española de Normalización in June of 2024.) | |
| Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements (Endorsed by Asociación Española de Normalización in May of 2025.) | |
| Series capacitors for power systems - Part 4: Thyristor controlled series capacitors (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| Solderless connections - Part 2: Crimped connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Solderless connections - Part 3: Accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in July of 2020.) | |
| Solderless connections - Part 4: Non-accessible insulation displacement (ID) connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in September of 2020.) | |
| Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in October of 2020.) | |
| Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in March of 2023.) | |
| Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in April of 2026.) | |
| Solderless connections - Part 7: Spring clamp connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in March of 2021.) | |
| Solderless connections - Part 9: Ultrasonically welded connections - General requirements, test methods and practical guidance (Endorsed by Asociación Española de Normalización in May of 2024.) | |
| Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (Endorsed by Asociación Española de Normalización in January of 2021.) | |
| Sound system equipment - Part 16: Objective rating of speech intelligibility by speech transmission index (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| Sound system equipment - Part 21: Acoustical (output-based) measurements (Endorsed by Asociación Española de Normalización in February of 2019.) | |
| Sound system equipment - Part 22: Electrical and mechanical measurements on transducers (Endorsed by Asociación Española de Normalización in January of 2021.) | |
| Sound system equipment - Part 23: TVs and monitors - Loudspeaker systems (Endorsed by Asociación Española de Normalización in May of 2023.) | |
| Sound system equipment - Part 24: Headphones and earphones - active acoustic noise cancelling characteristics (Endorsed by Asociación Española de Normalización in February of 2024.) | |
| Sound system equipment - Part 3: Amplifiers (Endorsed by Asociación Española de Normalización in July of 2018.) | |
| Sound system equipment - Part 4: Microphones (Endorsed by Asociación Española de Normalización in December of 2018.) | |
| Sound system equipment - Part 7: Headphones and earphones (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Specification for mortar for masonry - Part 1: Rendering and plastering mortar | |
| Specification for mortar for masonry - Part 2: Masonry mortar | |
| Specification for mortar for masonry -Part 2: Masonry mortar | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-1: Radio disturbance and immunity measuring apparatus - Measuring apparatus (Endorsed by Asociación Española de Normalización in August... | |
| Specification for radio disturbance and immunity measuring apparatus and methods - Part 1-4: Radio disturbance and immunity measuring apparatus - Antennas and test sites for radiated disturbance measurements (Endorsed by... | |
| Specification of technical grade sulphur hexafluoride (SF6) and complementary gases to be used in its mixtures for use in electrical equipment | |
| Specifications for particular types of winding wires – Part 84: Polyesterimide enamelled round copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 0-2: General requirements - Enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 0-3: General requirements - Enamelled round aluminium wire | |
| Specifications for particular types of winding wires - Part 0-4: General requirements - Glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire | |
| Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire | |
| Specifications for particular types of winding wires - Part 0-8: General requirements - Polyester glass-fibre wound unvarnished and fused, or resin or varnish impregnated, bare or enamelled rectangular copper wire... | |
| Specifications for particular types of winding wires - Part 12: Polyvinyl acetal enamelled round copper wire, class 120 | |
| Specifications for particular types of winding wires - Part 17: Polyvinyl acetal enamelled rectangular copper wire, class 105 | |
| Specifications for particular types of winding wires - Part 18: Polyvinyl acetal enamelled rectangular copper wire, class 120 | |
| Specifications for particular types of winding wires - Part 25: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 | |
| Specifications for particular types of winding wires - Part 27-1: Paper tape covered round copper wire | |
| Specifications for particular types of winding wires - Part 27-2: Paper tape covered round aluminium wire | |
| Specifications for particular types of winding wires - Part 27-3: Paper tape covered rectangular copper wire | |
| Specifications for particular types of winding wires - Part 27-4: Paper tape covered rectangular aluminium wire | |
| Specifications for particular types of winding wires - Part 60-1: Polyester glass-fibre wound fused, unvarnished, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 60-2: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 61: Polyester glass-fibre wound, resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 62: Polyester glass-fibre wound, silicone resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 70-1: Polyester glass-fibre wound unvarnished and fused, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 70-2: Polyester glass-fibre wound resin/varnish impregnated, bare or enamelled round copper wire, temperature index 155 | |
| Specifications for particular types of winding wires - Part 71: Polyester glass-fibre wound and resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 | |
| Specifications for particular types of winding wires - Part 72: Polyester glass-fibre wound silicone resin/varnish impregnated, bare or enamelled round copper wire, temperature index 200 | |
| Specifications for particular types of winding wires - Part 73: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular aluminium wire, class 200 | |
| Specifications for particular types of winding wires - Part 74: Polyesterimide enamelled rectangular aluminium wire, class 180 | |
| Specifications for particular types of winding wires - Part 80: Polyvinyl acetal enamelled rectangular copper wire, class 120, with a bonding layer | |
| Specifications for particular types of winding wires - Part 82: Polyesterimide enamelled rectangular copper wire, class 200 | |
| Specifications for particular types of winding wires - Part 89: Polyesterimide enamelled round aluminum wire, class 200 | |
| Specifications for particular types of winding wires - Part 93: Polyester or polyesterimide overcoated with polyamide-imide enamelled rectangular copper wire, class 220 | |
| Steam turbines - Part 1: Specifications (Endorsed by Asociación Española de Normalización in August of 2020.) | |
| Surge arresters - Part 5: Selection and application recommendations (Endorsed by Asociación Española de Normalización in May of 2018.) | |
| Surge arresters - Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV (Endorsed by Asociación Española de... | |
| Symbols for use in the labelling of medical devices | |
| Tannery machines - Reciprocating roller machines - Safety requirements | |
| Terms and nomenclature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities and reference of dimensions (Endorsed by Asociación Española de Normalización in July... | |
| TEST METHODS FOR VERIFICATION OF CORROSION PROTECTION OF REINFORCEMENT IN AUTOCLAVED AERATED CONCRETE AND LIGHTWEIGHT AGGREGATE CONCRETE WITH OPEN STRUCTURE. | |
| Test procedure for the determination of the temperature index of enamelled and tape wrapped winding wires | |
| Test procedure for thermal endurance of insulating resins and varnishes for impregnation purposes - Electric breakdown methods (Endorsed by Asociación Española de Normalización in April of 2018.) | |
| Tests for electric cables under fire conditions - Circuit integrity - Part 1: Test method for fire with shock at a temperature of at least 830°C for cables of rated... | |
| Tests on electric and optical fibre cables under fire conditions - Part 3-10: Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus | |
| Tests on electric and optical fibre cables under fire conditions - Part 3-21: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R | |
| Tests on electric and optical fibre cables under fire conditions - Part 3-22: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A | |
| Tests on electric and optical fibre cables under fire conditions - Part 3-23: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B | |
| Tests on electric and optical fibre cables under fire conditions - Part 3-24: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C | |
| Tests on electric and optical fibre cables under fire conditions - Part 3-25: Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D | |
| Textile floor coverings - Assessment of the creep of the backings | |
| Textile floor coverings - Castor chair test. | |
| Textile floor coverings - Determination of the mass per unit area of the use surface of needled floor coverings. | |
| Textile floor coverings - Determination of the side length, squareness and straightness of tiles | |
| Textile floor coverings - Tiles - Determination of dimensional changes due to the effects of varied water and heat conditions and distortion out of plane | |
| TEXTILE FLOOR COVERINGS. CASTOR CHAIR TEST. | |
| TEXTILE FLOOR COVERINGS. TILES. DETERMINATION OF DIMENSIONAL CHANGES DUE TO THE EFFECTS OF VARIED WATER AND HEAT CONDITIONS AND DISTORTION OUT OF PLANE. | |
| TEXTILES FLOOR COVERINGS. DETERMINATION OF THE SIDE LENGTH, SQUARENESS AND STRAIGHTNESS OF TILES. | |
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 1: Requirements and test methods for single wall tanks... | |
| Underground tanks of glass-reinforced plastics (GRP) - Horizontal cylindrical tanks for the non-pressure storage of liquid petroleum based fuels - Part 2: Transport, handling, storage and installation of single wall... | |
| UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). DETERMINATION OF FACTOR ALPHA AND FACTOR BETA. | |
| UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). HORIZONTAL CYLINDRICAL TANKS FOR THE NON-PRESSURE STORAGE OF LIQUID PETROLEUM BASED FUELS. PART 1: REQUIREMENTS AND TEST METHODS FOR SINGLE WALL TANKS. | |
| UNDERGROUND TANKS OF GLASS-REINFORCED PLASTICS (GRP). METHOD FOR ONE SIDE EXPOSURE TO FLUIDS. | |
| Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers (Endorsed by Asociación Española de Normalización in March... | |
| WC pans and WC suites with integral trap | |
| WC PANS WITH INTEGRAL TRAP | |
| ZINC AND ZINC ALLOYS. SPECIFICATIONS FOR ROLLED FLAT PRODUCTS FOR BUILDING. |
| << Prev | Next >> |