Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
600
650
700
750
800
850
880
890
900
910
920
930
933
934
935
936
937
938
939
940
941
942
943
944
945
950
960
970
980
990
1000
1050
1100
1150
1200
1250
1300
1500
1620
| Product Name | Notes |
|---|---|
| Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 1: General Principles and Definitions | |
| Accuracy (trueness and precision) of measurement methods and results - Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method | |
| Accuracy (trueness and precision) of measurement methods and results - Part 3: Intermediate measures of the precision of a standard measurement method | |
| Accuracy (trueness and precision) of measurement methods and results - Part 4: Basic methods for the determination of the trueness of a standard measurement method | |
| Accuracy (trueness and precision) of measurement methods and results - Part 5: Alternative methods for the determination of the precision of a standard measurement method | |
| Accuracy (Trueness and Precision) of Measurement Methods and Results - Part 6: Use in Practice of Accuracy Values | |
| Accuracy (trueness and precision) of measurement methods and results\x97Part 5: Alternative methods for the determination of the precision of a standard measurement method | |
| Accuracy (trueness and precision) of measurement methods and results\x97Part 6: Use in practice of accuracy values | |
| Acoustics - Attenuation of sound during propagation outdoors - Part 1: Calculation of the absorption of sound by the atmosphere | |
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points | |
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 2: Measurement by scanning | |
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning | |
| Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially... | |
| Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ | |
| Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels | |
| Aerosol particle number concentration - Calibration of condensation particle counters | |
| Applications of statistical and related methods to new technology and product development process - Robust parameter design (RPD) | |
| Automatic Control - Vocabulary - General | |
| BANDAGE, SELF-ADHERENT | |
| Basic principles for graphical symbols for use on equipment - Part 1: Creation of symbol originals | |
| Basic principles for graphical symbols for use on equipment - Part 2: Form and use of arrows | |
| Basic principles for graphical symbols for use on equipment - Part 3: Guidelines for the application of graphical symbols | |
| BELT, SAFETY, INDUSTRIAL, SAFETY-BODY-PAD-HARN ESS | |
| BELT, SEAT, PASSENGER TYPE, AUTOMOTIVE | |
| BELTING, FLAT, CONVEYOR OR POWER TRANSMISSION, COTTON (SOLID WOVEN) | |
| BELTS, ROUND, (DENTAL ENGINES) | |
| BELTS, ROUND, DENTAL ENGINE | |
| Biosolids Fuel | |
| Calibration and Testing Laboratory Accreditation Systems - General Requirements for Operation and Recognition | |
| Capability of detection - Part 1: Terms and definitions | |
| Capability of detection - Part 2: Methodology in the linear calibration case | |
| Capability of detection - Part 3: Methodology for determination of the critical value for the response variable when no calibration data are used | |
| Capability of detection - Part 5: Methodology in the linear and non-linear calibration cases | |
| Capability of detection - Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations | |
| Capability of detection - Part 7: Methodology based on stochastic properties of instrumental noise | |
| Capability of detection-Part 4: Methodology for comparing the minimum detectable value with a given value | |
| Carbon nanotube composite resin coating film | |
| Child safety - General principles for design and development | |
| CIE standard colorimetric illuminants | |
| CIE standard colorimetric observers | |
| Classification of Fluorescent Lamps by Chromaticity and Colour Rendering Property | |
| Colloidal systems - Methods for zeta-potential determination - Optical methods | |
| COLORIMETRY - PART 1: CIE STANDARD COLORIMETRIC OBSERVERS | |
| Colorimetry - Part 2: CIE standard colorimetric illuminants | |
| Colorimetry - Part 3: CIE tristimulus values | |
| Colorimetry - Part 4: CIE 1976 L*a*b* Colour space | |
| Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u', v' uniform chromaticity scale diagram | |
| Colorimetry - Part 6: CIEDE2000 Colour-difference formula | |
| Colour Specification - Colour Differences of Non-Luminous Object Colours | |
| Colour Specification - Names of Light-source Colour | |
| Colour Specification - Specification According to Their Three Attributes | |
| Colour Specification - The CIE 1931 Standard Colorimetric System and the CIE 1964 Supplementary Standard Colorimetric System | |
| Complaints Handling Management Systems - Guideline | |
| Contamination Control - Vocabulary | |
| Contamination Control-Terminology (Amendment 1) | |
| Control Chart Method | |
| Control Charts - General Guide and Introduction | |
| Control charts - Part 1: General guidelines | |
| Control charts - Part 2: Shewhart control charts | |
| Control charts - Part 4: Cumulative sum charts | |
| Densified refuse derived fuel - Part 5: Test methods of metals contents | |
| Densified refuse derived fuel - Part 6: Test method for total chlorine contents | |
| Densified refuse derived fuel - Part 7: Test method for sulfer content | |
| Densified refuse derived fuel - Part 8: Test method for ultimate analysis | |
| Densified refuse derived fuel - Part 9: Test method for apparent bulk density | |
| Design for Business Forms | |
| Design of graphical symbols for use in the technical documentation of products - Part 1: Basic rules | |
| Design of graphical symbols for use in the technical documentation of products - Part 2: Specification for graphical symbols in a computer sensible form, including graphical symbols for a reference... | |
| Design of graphical symbols for use in the technical documentation of products - Part 3: Classification of connect nodes, networks and their encoding | |
| Design principles of public information symbols-Part 1: General requirement | |
| Design principles of public information symbols-Part 2: Shapes, colours for use in symbols for facilities | |
| Design principles of public information symbols-Part 3: Shapes, colours for use in symbols for safety | |
| Design Standard for Nameplates | |
| Determination of density by volumetric displacement -- Skeleton density by gas pycnometry | |
| Determination of particle adhesion force by centrifugal method | |
| Determination of particle size distribution -- Differential electrical mobility analysis for aerosol particles | |
| Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 1: General principles and guidelines | |
| Determination of particle size distribution by centrifugal liquid sedimentation methods - Part 2: Photocentrifuge method | |
| Determination of particle size distribution by gravitational liquid sedimentation methods - Part 1: General principles and guidelines | |
| Determination of particle size distribution by gravitational liquid sedimentation methods - Part 2: Fixed pipette method | |
| Determination of Particle Size Distribution by the Sedimentation in Liquid Using the Pipette Apparatus | |
| Determination of Particle Size Distribution by the Weight of Sedimentation in Liquid | |
| Determination of particle size distributions - Electrical sensing zone method | |
| Determination of the Specific Surface Area of Powders by Gas Adsorption Methods | |
| Dimensions of Printing Types | |
| Direct shear testing method for critical state line (CSL) and wall yield locus (WYL) of powder bed | |
| Document management - Part 1: Principles and methods | |
| Engineering and Survey Methods for the Determination of Sound Power Level in General Sound Fields | |
| Ergonomic design of control centres - Part 1: Principles for the design of control centres | |
| Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites | |
| Ergonomic design of control centres - Part 3: Control room layout | |
| Ergonomic design of control centres - Part 4: Layout and dimensions of workstations | |
| Ergonomic design of control centres - Part 6: Environmental requirements for control centres | |
| Ergonomic principles in the design of work systems | |
| Ergonomic Principles Related to Mental Work-Load - General Terms and Definitions | |
| Ergonomic principles related to mental workload - Design principles | |
| Ergonomic principles related to mental workload -- Part 1: General issues and concepts, terms and definitions | |
| Ergonomic requirements for work with visual display based on flat panels - Part 1: Introduction | |
| Ergonomic requirements for work with visual displays based on flat panels - Part 2: Ergonomic requirements for flat panel displays | |
| Ergonomics - Anthropometric and Biomechanic Measurements | |
| Ergonomics - Office work with visual display terminals (VDTs) - Command dialogues | |
| Ergonomics - Office work with visual display terminals (VDTs) - Direct manipulation dialogues | |
| Ergonomics - Office work with visual display terminals (VDTs) - Form filling dialogues | |
| Ergonomics - Office work with visual display terminals (VDTs) - General introduction (Amendment 1) | |
| Ergonomics - Office work with visual display terminals (VDTs) - General Introduction | |
| Ergonomics - Office Work with Visual Display Terminals (VDTs) - Guidance on Task Requirements | |
| Ergonomics - Office work with visual display terminals (VDTs) - Guidance on the work environment | |
| Ergonomics - Office work with visual display terminals (VDTs) - Guidance on usability | |
| Ergonomics - Office work with visual display terminals (VDTs) - Keyboard requirements | |
| Ergonomics - Office work with visual display terminals (VDTs) - Menu dialogues | |
| Ergonomics - Office work with visual display terminals (VDTs) - Presentation of information | |
| Ergonomics - Office work with visual display terminals (VDTs) - Requirements for display with reflections | |
| Ergonomics - Office work with visual display terminals (VDTs) - Requirements for displayed colours | |
| Ergonomics - Office work with visual display terminals (VDTs) - Requirements for non-keyboard input devices | |
| Ergonomics - Office work with visual display terminals (VDTs) - User guidance | |
| Ergonomics - Office work with visual display terminals (VDTs) - Visual display requirements | |
| Ergonomics - Office work with visual display terminals (VDTs) - Workstation layout and postural requirements | |
| Ergonomics - Office work with visual display terminals (VDTs)- Visual display requirements | |
| Ergonomics - Software for multimedia user interfaces - Part 1: Design principles and framework | |
| Ergonomics - Software for multimedia user interfaces - Part 2: Multimedia navigation and control | |
| Ergonomics - Software for multimedia user interfaces - Part 3: Media selection and combination | |
| Ergonomics of human-system interaction - Part 110: Dialogue principles | |
| Ergonomics of human-system interaction -- An ergonomic approach to accessibility | |
| Ergonomics-Manual handling-Part 1: Lifting, lowering and carrying | |
| Evaluation Method of Degree of Metamerism for Change in Illuminants | |
| Evaluation Method of Degree of Metamerism for Change in Observers | |
| Filter Fabrics for Dust Collection | |
| Fluorescent lamp as a simulator of CIE standard illuminant D65 for a visual comparison of surface colours - Type and characteristics | |
| Fluorescent Safety Signs | |
| Frequency Standard for Musical Instruments | |
| General Requirements for Assessment and Accreditation of Certification/Regist ration Bodies | |
| General Requirements for Bodies Operating Assessment and Certification/Regist ration of Quality Systems | |
| General Requirements for the Competence of Calibration and Testing Laboratories | |
| General Rules for Determination of Thermal Efficiency | |
| General Rules for Energy Evaluation Method by Available Energy | |
| General Rules for Graphical Symbols | |
| General Rules for Heat Balance | |
| General Rules for Permissible Tolerance of Chemical Analyses and Physical Tests | |
| General Rules for Pointers of Industrial Instruments | |
| General Rules for Sampling Inspection Procedures | |
| General Rules for Scale of Industrial Instruments | |
| General Rules for Sensory Tests | |
| General Rules for the Determination of Particle Size Distribution by Sedimentation in Liquid | |
| General rules of recommended lighting levels (Amendment 1) | |
| Geometrical Orientation and Directions of Movements | |
| Glass Electrodes for Measurement of pH | |
| Glass foam recycle materials | |
| Glossary of Acoustical Terms (General) | |
| Glossary of Acoustical Terms (Hearing-Speech- Music) | |
| Glossary of Acoustical Terms (Sound Recording and Sound Reproducing) | |
| Glossary of Acoustical Terms (Transducers and Instruments) | |
| Glossary of Colour Terms | |
| Glossary of Drawing Terms | |
| Glossary of Far Infrared Radiation Terms | |
| Glossary of Optical Terms | |
| Glossary of Terms Used in Instrumentation | |
| Glossary of Terms Used in Operations Research | |
| Glossary of Terms Used in Production Management (Equipment Management) | |
| Glossary of Terms Used in Production Management (Production Control) | |
| Glossary of Terms Used in Production Management | |
| Glossary of Terms Used in Quality Control | |
| Glossary of Terms Used in Reliability | |
| GLOVES, MEN'S AND WOMEN'S CLOTH, LEATHER PALM | |
| GLOVES, WORK, FLANNEL COTTON | |
| Granules and Agglomerates - Test Methods for Strength | |
| Graphic arts - Glossary - Digital printing terms | |
| Graphic Arts - Glossary - Fundamental Terms | |
| Graphic arts - Glossary-trading terms | |
| Graphic technology - Vocabulary - Part 1: Fundamental terms | |
| Graphic technology - Vocabulary - Part 2: Prepress terms | |
| Graphic technology - Vocabulary - Part 3: Printing terms | |
| Graphic technology - Vocabulary - Part 4: Postpress terms | |
| Graphical symbols - Safety signs - Safety way guidance systems (SWGS) - Phosphorescence type | |
| Graphical symbols for diagrams - Part 10: Fluid power converters | |
| Graphical symbols for diagrams - Part 11: Devices for heat transfer and heat engines | |
| Graphical symbols for diagrams - Part 12: Devices for separating, purification and mixing | |
| Graphical symbols for diagrams - Part 13: Devices for material processing | |
| Graphical symbols for diagrams - Part 14: Devices for transport and handling of material | |
| Graphical symbols for diagrams - Part 15: Installation diagrams and network maps | |
| Graphical symbols for diagrams - Part 1: General information and indexes | |
| Graphical symbols for diagrams - Part 2: Symbols having general application | |
| Graphical symbols for diagrams - Part 3: Connections and related devices | |
| Graphical symbols for diagrams - Part 4: Actuators and related devices | |
| Graphical symbols for diagrams - Part 5: Measurement and control devices | |
| Graphical symbols for diagrams - Part 6: Measurement and control functions | |
| Graphical symbols for diagrams - Part 7: Basic mechanical components | |
| Graphical symbols for diagrams - Part 8: Valves and dampers | |
| Graphical symbols for diagrams - Part 9: Pumps, compressors and fans | |
| Graphical symbols for diagrams -- Part 12: Devices for separating, purification and mixing (Amendment 1) | |
| Graphical symbols for diagrams -- Part 5: Measurement and control devices (Amendment 1) | |
| Graphical symbols for diagrams -- Part 8: Valves and dampers (Amendment 1) | |
| Graphical symbols for diagrams -- Part 9: Pumps, compressors and fans (Amendment 1) | |
| Graphical Symbols for Process Chart | |
| Guidelines for Auditing Quality Systems - Part 1: Auditing | |
| Guidelines for Auditing Quality Systems - Part 2: Qualification Criteria for Quality Systems Auditors | |
| Guidelines for Auditing Quality Systems - Part 3: Management of Audit Programmes | |
| Guidelines for Standards Developers to Address the Needs of Older Persons and Persons with Disabilities | |
| Hazard specific evacuation guidance sign system | |
| HOSE, FIRE, LINEN, UNLINED (WITH OR WITHOUT COUPLINGS) | |
| Hot environments - Estimation of the heat stress on working man, based on the WBGT-index (wet bulb globe temperature) | |
| Human-centred design processes for interactive systems | |
| Humidity - Measurement Methods | |
| Identification of Piping Systems | |
| Industrial plate screens | |
| Instrumentation Symbols for Powder Processes | |
| Instrumentation Symbols | |
| Interval Estimation of the Difference Between Two Population Means (Standard Deviations Known) | |
| Interval Estimation of the Difference Between Two Population Means (Standard Deviations Unknown) | |
| Interval Estimation of the Population Mean (Standard Deviation Known) | |
| Interval Estimation of the Population Mean (Standard Deviation Unknown) | |
| Interval Estimation of the Population Variance Ratio | |
| Interval Estimation of the Population Variance | |
| Lantern-Type Safety Signs | |
| Lighting for Outdoor Sports (Track and Field, Soccer Field, Rugby Field) | |
| Lighting for Outdoor Tennis Courts and Outdoor Baseball Fields | |
| Lighting for Roads | |
| Lighting for Skiing Grounds and Ice Skating Rinks | |
| Lighting for Sports Halls | |
| Lighting for Swimming Pools | |
| Lighting of indoor work places | |
| Lighting of outdoor work places | |
| Lighting of Tunnels for Motorized Traffic | |
| Lighting vocabulary | |
| Linear calibration using reference materials | |
| Low Volume Air Sampler | |
| Mass-Spectrometer-Ty pe Leak-Detector Calibration | |
| Mathematical Symbols | |
| Measurement - General Rules for Calibration System | |
| Measurement of Fluid Flow by Means of Orifice Plates, Nozzles and Venturi Tubes | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes | |
| Measurement of gas flow by means of critical flow Venturi nozzles | |
| Measurement uncertainty - Part 1: Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation | |
| Measurement uncertainty - Part 2: Measurement uncertainty for metrological applications - Repeated measurements and nested experiments | |
| Measuring Methods for Specific Gravity of Solid | |
| Measuring Methods for Suspended Particulate Matter Concentration in Air-General Requirements | |
| Measuring Methods of Eye-Hazardous Ultraviolet Radiation | |
| Measuring Methods of Low Pressures by Hot Cathode and Cold Cathode Ionization Gauges | |
| Measuring Methods of Low Pressures by Thermal Conductivity Gauge | |
| Measuring Methods of Ultra-violet Rays for Sterilization | |
| Mechanical vibration and shock - Human exposure - Vocabulary | |
| Median Control Chart | |
| Metamerism Index - Evaluation Method of Degree of Metamerism for Change in Illuminant | |
| Method for determining minimum ignition energy of dust/air mixtures | |
| Method of droplet volume measurement by image processing using an electric pipet | |
| Method of Flow Measurement by Electromagnetic Flowmeters | |
| Method of Flow Measurement by Float Type Area Flowmeters | |
| Method of Flow Measurement by Turbine Meters | |
| Method of Measurement for Specular Glossiness | |
| Method of Specifying Colour Rendering Properties of Light Sources | |
| Method of temperature measurement by filled-system thermometers and bimetallic thermometers | |
| Method of Temperature Measurement by Liquid- In-Glass Thermometers | |
| Method of Temperature Measurement by Liquid-in-glass Thermometers (Amendment 1) | |
| Methods for Determination of pH of Aqueous Solutions | |
| Methods for Determining Distribution Temperature and Colour Temperature or Correlated Colour Temperature of Light Sources | |
| Methods for Measurement and Description of A-Weighted Sound Pressure Level | |
| Methods for measurement of hologram recording characteristics | |
| Methods for testing comprehensibility of graphical symbols | |
| Methods of Calibration for Vacuum Gauges | |
| Methods of Colour Measurement - Reflecting and Transmitting Objects | |
| Methods of Colour Measurement - Reflecting or Transmitting Objects | |
| Methods of continuous measurement for dust concentration in flue gas | |
| Methods of Flow Measurement by Vortex Flowmeters | |
| Methods of Measurement for Colour of Fluorescent Objects | |
| Methods of Measurement for Light Source Colour | |
| Methods of measurement for vibration level | |
| Methods of measuring diffraction efficiency and associated optical characteristics of hologram | |
| Methods of Measuring Dust Concentration in Flue Gas | |
| Methods of Measuring Specific Gravity of Liquid | |
| Methods of Temperature Measurement by Optical Pyrometers | |
| Methods of Visual Comparison for Surface Colours | |
| Names of Non-Luminous Object Colours | |
| Normal Single Sampling Inspection Plans by Variables (Standard Deviation Unknown and Single Limit Specified) | |
| Particle characterization of particulate systems - Vocabulary | |
| Particle size analysis - Dynamic light scattering (DLS) | |
| Particle size analysis - Image analysis methods - Part 1: Static image analysis methods | |
| Particle size analysis - Image analysis methods - Part 2: Dynamic image analysis methods | |
| Particle size analysis - Laser diffraction methods - Part 1: General principles | |
| Particle size analysis - Laser diffraction methods | |
| Particle size analysis - Photon correlation spectroscopy | |
| Particle size analysis -- Particle tracking analysis (PTA) method | |
| Particle size analysis -- Small angle X-ray scattering (SAXS) | |
| Particulate Materials - General Requirements for Methods of Sampling | |
| Particulate reference materials -- Specifications and uncertainty evaluation for polydisperse spherical particles | |
| Phosphorescent Safety Sign Boards; Errata - 1996 | |
| Photometry - The CIE system of physical photometry | |
| Pore size distribution and porosity of solid materials - Part 2: Analysis of mesopores and macropores by gas adsorption | |
| Pore size distribution and porosity of solid materials - Part 3: Analysis of micropores by gas adsorption | |
| Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption -- Analysis of nanopores by gas adsorption | |
| Powder Processing Machinery and Equipment - Graphical Symbols | |
| Precision Methods for the Determination of Sound Power Level in Reverberation Rooms | |
| Precision Methods for the Measurement of Sound Power Level in Anechoic and Hemi-Anechoic Rooms | |
| Preferred Numbers | |
| Presentation and Reduction of Data | |
| Proofreader\xb4s Marks | |
| Protection against lightning - Part 1: General principles | |
| Protection against lightning - Part 3: Physical damage to structures and life hazard | |
| Protection against lightning - Part 4: Electrical and electronic systems within structures | |
| Public Information Symbols (Amendment 1) | |
| Public Information Symbols (Amendment 2) | |
| Public Information Symbols (Amendment 3) | |
| Public Information Symbols (Amendment 4) | |
| Public Information Symbols (Amendment 5) | |
| Public Information Symbols (Amendment 6) | |
| Public Information Symbols | |
| Quality Characteristics of Products - General Rules for Determination of Specific Values | |
| Quality Management and Quality Assurance Standards Part 1: Guidelines for Selection and Use | |
| Quality Management and Quality System Elements - Part 1: Guidelines | |
| Quality Systems - Model for Quality Assurance in Design,Development, Production, Installation and Servicing (ISO 9001:1994) | |
| Quality Systems - Model for Quality Assurance in Final Inspection and Test (ISO 9003:1994) | |
| Quality Systems - Model for Quality Assurance in Production, Installation, and Servicing (ISO 9002:1994) | |
| Quantitative analysis methods for [60]fullerene and [70]fullerene by high performance liquid chromatography | |
| Quantities and units - Part 0: General principles | |
| Quantities and units - Part 10: Atomic and nuclear physics | |
| Quantities and units - Part 10: Nuclear reactions and ionizing radiations | |
| Quantities and units - Part 11: Characteristic numbers | |
| Quantities and units - Part 12: Characteristic numbers | |
| Quantities and units - Part 12: Solid state physics | |
| Quantities and units - Part 13: Solid state physics | |
| Quantities and units - Part 1: General | |
| Quantities and units - Part 1: Space and time | |
| Quantities and units - Part 2: Periodic and related phenomena | |
| Quantities and units - Part 3: Mechanics | |
| Quantities and units - Part 3: Space and time | |
| Quantities and units - Part 4: Heat | |
| Quantities and units - Part 4: Mechanics | |
| Quantities and units - Part 5: Electricity and magnetism | |
| Quantities and units - Part 5: Thermodynamics | |
| Quantities and units - Part 6: Electromagnetism | |
| Quantities and units - Part 6: Light and related electromagnetic radiations | |
| Quantities and units - Part 7: Acoustics | |
| Quantities and units - Part 7: Light | |
| Quantities and units - Part 8: Acoustics | |
| Quantities and units - Part 8: Physical chemistry and molecular physics | |
| Quantities and units - Part 9: Atomic and nuclear physics | |
| Quantities and units - Part 9: Physical chemistry and molecular physics | |
| Quantities and units -- Part 2: Mathematics | |
| Quantity Symbols, Unit Symbols and Chemical Symbols | |
| Random Sampling Methods | |
| Reading methods of the vacuum gauges by means of the head difference in the hydrostatic pressure (Amendment 1) | |
| Reading Methods of the Vacuum Gauges by Means of the Head Difference in the Hydrostatic Pressure | |
| Recommendation for sports lighting | |
| Recommended Levels of Illumination | |
| Refuse derived paper and plastics densified fuel | |
| Representation of results of particle size analysis - Part 1: Graphical representation | |
| Representation of results of particle size analysis - Part 2: Calculation of average particle sizes/diameters and moments from particle size distributions | |
| Retroreflective Safety Signs | |
| Retroreflective Sheeting and Tape for Safety | |
| Retroreflectors - Optical Properties - Measuring Method | |
| Retroreflectors - Optical Properties - Vocabulary | |
| Rules for Rounding off of Numerical Values | |
| Rules for the Drafting Presentation of Japanese Industrial Standards | |
| Rules for the layout and drafting of Japanese Industrial Standards (Amendment 1) | |
| Safety aspects - Guidelines for child safety in standards and other specifications | |
| Safety aspects - Guidelines for their inclusion in standards | |
| Safety Colours - General Specification | |
| Safety Colours and Safety Signs; (Errata - March 1996) | |
| Safety sign and guidance line of phosphorescent type on floor | |
| Safety Sign Boards | |
| Safety Signs - General Specification | |
| Sample preparation - Dispersing procedures for powders in liquids | |
| Sample reduction for the determination of particulate properties | |
| Sampler of PM2.5 in ambient air | |
| Sampling Inspection Plans by Attributes with Severity Adjustment | |
| Sampling Inspection Plans for Continuous Production by Attributes | |
| Sampling Procedures for Inspection by Attributes - Part 2: Sampling Plans Indexed by Limiting Quality (LQ) for Isolated Lot Inspection | |
| Sampling Procedures for Inspection by Attributes - Part 3: Skip-Lot Sampling Procedures | |
| Sampling Procedures for Inspection by Attributes- Part 0: Introduction to the JIS Z 9015 Attribute Sampling System | |
| Sampling Procedures for Inspection by Attributes- Part 1: Sampling Plans Indexed by Acceptable Quality Level (AQL) for Lot-by-Lot Inspection | |
| Self-Luminous Safety Signs | |
| Sensory Analysis - Vocabulary | |
| Sequential Sampling Inspection Plans for Percent Defectives Having Desired Operating Characteristics by Variables (Standard Deviation Known) | |
| Sequential Sampling Inspection Plans Having Desired Operating Characteristics by Attributes | |
| SI Units and the Use of Their Multiples and of Certain Other Units | |
| Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, One-Sided) | |
| Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Known, Two-Sided) | |
| Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown, One-Sided) | |
| Significance Test of Difference Between the Population Mean and the Standard (Standard Deviation Unknown, Two-Sided) | |
| Significance Test of Difference Between the Two Population Means (Standard Deviations Known, One-Sided) | |
| Significance Test of Difference Between the Two Population Means (Standard Deviations Known, Two-Sided) | |
| Significance Test of Difference Between the Two Population Means (Standard Deviations Unknown, One-Sided) | |
| Significance Test of Difference Between the Two Population Means (Standard Deviations Unknown, Two-Sided) | |
| Significance Test of Equality of the Population Variance and the Standard (One-Sided) | |
| Significance Test of Equality of the Population Variance and the Standard (Two-Sided) | |
| Significance Test of Equality of the Two Population Variances (One-Sided) | |
| Significance Test of Equality of the Two Population Variances (Two-Sided) | |
| Simplified Representation of Pipe-Lines | |
| Single Sampling Inspection Plans by Attributes with Adjustment | |
| Single Sampling Inspection Plans Having Desired Operating Characteristics Part 1. Sampling by Attributes | |
| Single Sampling Inspection Plans Having Desired Operation Characteristics by Variables (Standard Deviation Known) | |
| Single Sampling Inspection Plans with Screening by Attributes | |
| Specification of Colour of Materials According to the CIE 1976 (L*A*B) Space and the CIE 1976 (L*U*V) Space | |
| Standard Atmospheric Conditions for Testing | |
| Standard Illuminants and Sources for Colorimetry | |
| Standard Liquids for Calibrating Viscometers | |
| Standard Type of Letters Used in Mechanical Engraving (Arabic Figures and Roman Types) | |
| Standard Type of Letters Used in Mechanical Engraving (Hiragana Characters) | |
| Standard Type of Letters Used in Mechanical Engraving (Joyo Kanji, Common-Use Chinese Characters) | |
| Standard Type of Letters Used in Mechanical Engraving (Katakana Characters) | |
| Standardization and related activities - General vocabulary | |
| Standards particles - Part 1: Reference particles for calibrating particle size measurements apparatus | |
| Statistical Interpretation of Data - Part 1: Statistical Presentation of Data | |
| Statistical Interpretation of Data - Part 2: Techniques of Estimation and Test Relating to Means and Variances | |
| Statistical Interpretation of Data - Part 3: Tests and Confidence Intervals Relating to Proportions | |
| Statistical Interpretation of Data - Part 4: Power of Tests Relating to Means and Variances | |
| Statistical interpretation of data - Part 5: Median - Estimation and confidence intervals | |
| Statistical methods for use in proficiency testing by interlaboratory comparisons | |
| Statistics - Vocabulary and Symbols - Part 1: Probability and General Statistical Terms | |
| Statistics - Vocabulary and Symbols - Part 2: Statistical Quality Control Terms | |
| Statistics - Vocabulary and Symbols - Part 3: Design of Experiments (Amendment 1) | |
| Statistics - Vocabulary and Symbols - Part 3: Design of Experiments | |
| Statistics-Vocabular y and symbols-Part 4: Survey sampling | |
| Symbol of Heat Balance Diagram | |
| Symbols for Piping Drawings of Chemical Plants | |
| Technical Drawing - Dimensioning | |
| Technical Drawing - General Code of Drawing Practice | |
| Technical Drawing - Lettering | |
| Technical Drawing - Line Conventions | |
| Technical Drawing - Presentation of Views and Sections | |
| Technical Drawing - Projection Methods | |
| Technical Drawing - Scales | |
| Technical Drawing - Sizes and Format of Drawings Edition 1 | |
| Technical Drawing - Tolerancing of Linear and Angular Dimensions | |
| Technical drawings - General principles of presentation - Basic conventions and applications for leader lines and reference lines | |
| Technical drawings - General principles of presentation - Preparation of lines by CAD system | |
| Technical drawings - Indications of dimensions and tolerances - Part 1: General Principles | |
| Technical Drawings - Lettering - Part 0: General Requirements | |
| Technical Drawings - Lettering - Part 10: Japanese Characters (Kana and Kanji) | |
| Technical Drawings - Lettering - Part 1: Currently Used Characters | |
| Technical Drawings - Lettering - Part 2: Greek Characters | |
| Technical Drawings - Projection Methods - Part 1: Synopsis | |
| Technical Drawings - Projection Methods - Part 2: Orthographic Representations | |
| Technical Drawings - Projection Methods - Part 3: Axonometric Representations | |
| Technical Drawings - Projection Methods - Part 4: Central Projection | |
| Technical product documentation - Lettering - Part 5: CAD lettering of the Latin alphabet, numerals and marks | |
| Technical Terms Used in Energy Management (No. 2) | |
| Technical Terms Used in Energy Management | |
| Temperature Measurement - Electrical Methods | |
| Temperature Measurement - General Requirement | |
| Test method for explosion pressure and rate of pressure rise of combustible dusts | |
| Test method for minimum explosible concentration of combustible dusts | |
| Test method of filter media for dust collection - Part 2: Test on durability under simulated running conditions | |
| Test method of filter media for dust collection - Part 3: Test for durability under high temperature | |
| Test Method Of Filter Media for Dust Collection - Sampling And Test Method For Fabric Filter Durability | |
| Test method of filter media for dust collection Part 1: Filter efficiency | |
| Test method of fracture and deformation strength of a fine particle | |
| Test methods for evaluating degradation of characteristics of cleanable filter media | |
| Test Powders and Test Particles | |
| Test Sieves (Errata - 4/1995) | |
| Test Sieves - Part 1: Test Sieves of Metal Wire Cloth | |
| Test Sieves - Part 2: Test Sieves of Perforated Metal Plate | |
| Test Sieves - Part 3: Test Sieves of Electroformed Sheets | |
| Test Sieves with Electroformed Sheet | |
| Test Sieving | |
| The human-centred organization -- Guidance for managers | |
| The human-centred organization -- Rationale and general principles | |
| Tsunami evacuation guidance - Safety signing system | |
| Vacuum Technology - Graphical Symbols | |
| Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges | |
| Vacuum Technology - Vocabulary (General Terms) | |
| Vacuum technology - Vocabulary - Part 1: General terms | |
| Vacuum technology - Vocabulary - Part 2: Vacuum pumps and related terms | |
| Vacuum technology - Vocabulary - Part 3: Vacuum gauges and related terms | |
| Viscosity of Liquid - Methods of Measurement | |
| White silicone ink films coated for luminaire uses | |
| Whiteness of Near-White Opaque Materials - Specifying Method | |
| X Control Chart | |
| Xenon Standard White Light Source |
| << Prev | Next >> |