Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
600
650
700
750
800
850
870
880
890
900
910
920
926
927
928
929
930
931
932
933
934
935
936
937
938
940
950
960
970
980
990
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| Abrasive Belts; (Errata-1996) | |
| Abrasive Belts | |
| Abrasive Cloths; (Errata-1996) | |
| Abrasive discs (Amendment 1) | |
| Abrasive Discs; (Errata-1996) | |
| Abrasive Discs | |
| Abrasive Grain Sizes | |
| Abrasive Papers | |
| Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere | |
| Acid and heat resisting bricks for chemical industry (Amendment 1) | |
| Acid and heat resisting bricks for chemical industry | |
| Acid Proof Glass Bottles | |
| Acid Proof Porcelain Bricks for Chemical Industry | |
| Alumina Cements for Refractories (Errata 2/2000) | |
| Alumina powder - Part 1: Test samples - 1: Sampling | |
| Alumina powder - Part 1: Test samples - 2: Preparation and storage | |
| Alumina powder - Part 2: Determination of physical properties - 1: Absolute density by pyknometer method | |
| Alumina powder - Part 2: Determination of physical properties - 2: Angle of repose | |
| Alumina powder - Part 2: Determination of physical properties - 3: Untamped density and tamped density | |
| Alumina powder - Part 3: Methods of chemical analysis - 10: Determination of boric oxide content | |
| Alumina powder - Part 3: Methods of chemical analysis - 11: Determination of fluorine content | |
| Alumina powder - Part 3: Methods of chemical analysis - 1: Determination of loss of mass by drying | |
| Alumina powder - Part 3: Methods of chemical analysis - 2: Determination of loss of mass by ignition | |
| Alumina powder - Part 3: Methods of chemical analysis - 3: Alkaline fusion | |
| Ampoule Pipe | |
| Ampoule | |
| Artificial Abrasives | |
| Artificial Graphite Electrodes | |
| Asbestos Braided Ropes | |
| Asbestos Brake Linings for Industrial Machines | |
| Asbestos Cloths | |
| Asbestos Mill Boards | |
| Asbestos Yarns and Twisted Ropes | |
| Ball Mill Test for Toughness of Artificial Abrasives | |
| Bonded Abrasive Products - Dimensions - Part 10: Stones for Honing and Superfinishings | |
| Bonded Abrasive Products - Dimensions - Part 11: Hand Finishing Sticks | |
| Bonded Abrasive Products - Dimensions - Part 12: Grinding Wheels for Deburring and Fettling on a Straight Grinder | |
| Bonded Abrasive Products - Dimensions - Part 13: Grinding Wheels for Deburring and Fettling on a Vertical Grinder | |
| Bonded abrasive products - Dimensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder | |
| Bonded abrasive products - Dimensions - Part 15: Grinding wheels for cutting-off on stationary or mobile cutting-off machines | |
| Bonded abrasive products - Dimensions - Part 16: Grinding wheels for cutting-off on hand held power tools | |
| Bonded abrasive products - Dimensions - Part 17: Spindle mounted wheels (ISO type 52) | |
| Bonded Abrasive Products - Dimensions - Part 1: Grinding Wheels for External Cylindrical Grinding Between Centres | |
| Bonded Abrasive Products - Dimensions - Part 2: Grinding Wheels for Centerless External Cylindrical Grinding | |
| Bonded Abrasive Products - Dimensions - Part 3: Grinding Wheels for Internal Cylindrical Grinding | |
| Bonded Abrasive Products - Dimensions - Part 4: Grinding Wheels for Surface Grinding/Peripheral Grinding | |
| Bonded Abrasive Products - Dimensions - Part 5: Grinding Wheels for Surface Grinding/Face Grinding | |
| Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding | |
| Bonded Abrasive Products - Dimensions - Part 7: Grinding Wheels for Manually Guided Grinding | |
| Bonded Abrasive Products - Dimensions - Part 8: Grinding Wheels for Deburring and Fettling/Snagging | |
| Bonded Abrasive Products - Dimensions - Part 9: Grinding Wheels for High-Pressure Grinding | |
| Bonded abrasive products - General requirements | |
| Bonded abrasive products - Limit deviations and run-out tolerances (Amendment 1) | |
| Bonded abrasive products - Limit deviations and run-out tolerances | |
| Bonded abrasive products - Static balancing of grinding wheels - Testing | |
| Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220 | |
| Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits | |
| Carbon Block | |
| Carbon fibre - Determination of density | |
| Carbon fibre - Determination of linear density | |
| Carbon fibre - Determination of size content | |
| Carbon fibre - Determination of tensile properties of resin-impregnated yarn | |
| Carbon fibre -- Determination of filament diameter and cross-sectional area | |
| Carbon fibre -- Determination of the tensile properties of the single-filament specimens | |
| Carbon fibre -- Determination of volume resistivity | |
| Ceramic Fiber Blanket (Amendment 1) | |
| Ceramic Fiber Blanket | |
| Chemical analysis method of cement by X-ray fluorescence (Amendment 1) | |
| Chemical analysis method of cement by x-ray flurescence | |
| Chemical Analysis of Aluminous Cement for Refractories | |
| Chemical Analysis of Chrome Ore for Refractories | |
| Chemical Analysis of Gypsum | |
| Chemical Analysis of High Purity Graphite Material | |
| Chemical Analysis of Limes | |
| Chemical Analysis of Refractory Bricks and Refractory Mortars | |
| Chrome brick (Amendment 1) | |
| Chrome Brick | |
| Chrome-Magnesia Brick | |
| Coated Abrasive Grain Sizes | |
| Coated abrasives - Flap discs | |
| Coated Abrasives - Flap Wheels with Incorporated Flanges or Separate Flanges - Designation and Dimensions | |
| Coated Abrasives - Flap Wheels with Shafts - Designation and Dimensions | |
| Compressed Asbestos Sheets | |
| Compressed fiber jointing (Amendment 1) | |
| Cover glasses for microscopes | |
| Crucible for Glass | |
| Cylindrical Abrasive Sleeves - Designation and Dimensions | |
| Cylindrical Abrasive Sleeves; (Errata-1996) | |
| Depressed Center Wheels with Fabric Reinforcement | |
| Determination of content of coarse particle in fine ceramic powders by wet siezing method | |
| Determination of interfacial thermal resistance between fine ceramic film and metal film | |
| Determination of particle size distributions for fine ceramic raw powders by laser diffraction method | |
| Determination of specific heat of fiber-reinforced ceramics composite by differential scanning calorimetry methods | |
| Determination of thermal diffusivity for heat dissipation graphite sheet by a laser spot periodic heating radiation thermometry method | |
| Determination of Thermal Diffusivity of Continuous Fiber-Reinforced Ceramic Matrix Composites by the Laser Flash Method | |
| Determination of thermal diffusivity of fine ceramic films by pulsed light heating thermoreflectance method | |
| Ecocement (Amendment 1) | |
| Ecocment | |
| Enamel Apparatus for Laboratory | |
| Endless Abrasive Belts; (Errata-1996) | |
| Evaluation on Thermal Resistance of Flat Glasses and Thermal Transmittance of Glazing | |
| Figured Glasses | |
| Fine ceramics (advanced ceramics, advanced technical ceramics ) - Test method for self-cleaning performance of photocatalytic materials - Part 2: Decomposition of wet methylene blue | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Characteristic of piezoelectric properties under high load conditions - Part 1: Resonant-antiresonan t method under high temperature conditions | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Characteristic of piezoelectric properties under high load conditions - Part 2: Electrical transient response method under high vibration levels | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of anti viral activity of photo catalytic materials under indoor lighting environment - Test method using bacteriophage Q-beta | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of antiviralactivity of photocatalytic materials - Test method using bacteriophage Q-beta | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Single cell polarization test method for solid oxide electrochemical cell by current interruption technique | |
| Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Air Purification Performance of Photocatalytic Materials - Part 1: Removal of Nitric Oxide | |
| Fine Ceramics (Advanced Ceramics, Advanced Technical Ceramics) - Test Method for Air Purification Performance of Photocatalytic Materials - Part 2: Removal of Acetaldehyde | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials - Part 3: Removal of toluene | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials - Part 4: Removal of formaldehyde | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials - Part 5: Removal of methylmercaptan | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 1: Removal of nitric oxide | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 2: Removal of acetaldehyde | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 3: Removal of toluene | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 4: Removal of formaldehyde | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 5: Removal of methylmercaptan | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for air purification performance of photocatalytic materials under indoor lighting environment - Part 6: Removal of formaldehyde by small chamber... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of photo catalytic products and efficacy under indoor lighting environment | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antibacterial activity of photocatalytic products under photoirradiation and efficacy | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antifungal activity of photocatalytic products under photoirradiation (Amendment 1) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for antifungal activity of photocatalytic products under photoirradiation | |
| Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for determination of phenol oxidative decomposition performance of photocatalytic materials by total organic carbon analysis | |
| Fine ceramics (Advanced ceramics, advanced technical ceramics) - Test method for determination of photocatalytic activity on semiconducting photocatalytic materials by dissolved oxygen consumption | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of photo catalytic materials under indoor lighting environment - Measurement of water contact angle | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for self-cleaning performance of photocatalytic materials - Part 1: Measurement of water contact angle | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for water-purification performance of photocatalytic materials by measurement of forming ability of active oxygen | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method of complete decomposition by photo catalytic materials under indoor lighting environment - Decomposition of acetaldehyde | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) -- Method of measurement for assessing the power generation characteristics of piezoelectric device for self-sustaining power source | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) -- Test method for antialgal activity of semiconducting photocatalytic materials | |
| Fine ceramics - Fundamental characteristics and classification of silicon nitride materials for rolling bearing balls | |
| Fine ceramics - Light source for testing semiconducting photocatalytic materials used under indoor lighting environment | |
| Fine ceramics - Thermocouple protection tube for molten aluminum | |
| Finished Glass Fabrics Used for Copper Clad Laminates and Other Electric Purposes | |
| Finished Textile Glass Fabrics | |
| Fireclay Brick | |
| Float and Polished Plate Glasses | |
| Float glass and polished plate glass (Amendment 1) | |
| General rules for the sample preparation of particle size analysis of fine ceramic raw powder | |
| Glass apparatus for chemical analysis (Amendment 1) | |
| Glass Apparatus for Chemical Analysis | |
| Glass beads for traffic paint (Amendment 1) | |
| Glass Beads for Traffic Paint | |
| Glass Bottles for Drug | |
| Glass components for chemical plants (Amendment 1) | |
| Glass Components for Chemical Plants | |
| Glass Fabrics for Membrane Structure | |
| Glass in building - Destructive-windstor m-resistant security glazing - Test method | |
| Glass in building - Forced-entry security glazing - Test and classification by repetitive ball drop | |
| Glass in building -- Determination of the bending strength of glass -- Part 3: Test with specimen supported at two points (four-point bending) | |
| Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass | |
| Glass in building -- Determination of the bending strength of glass -- Part 5: Coaxial double ring test on flat specimens with small test surface areas | |
| Glass in buildings - Insulating glass - Part 1: Durability of edge seals by climate tests | |
| Glass in buildings-Insulating glass-Part 3: Gas concentration and gas leakage | |
| Glass Material for Chemical Analysis | |
| Glass Mirror, Unworked | |
| Glass Rods | |
| Glass Tubes | |
| Glass-Lined Apparatus and Equipment for Industry | |
| Glossary of Terms and Marks Used in Abrasives, Grinding Wheels and Coated Abrasives | |
| Glossary of Terms Related to Gypsum, Lime and Magnesia Cement | |
| Glossary of terms relating to fine ceramics (Amendment 1) | |
| Glossary of Terms Relating to Fine Ceramics | |
| Glossary of Terms Relating to Textile Glass | |
| Glossary of Terms Used in Refractory | |
| Graphite Crucible and Its Accessories | |
| Gypsum for Portland Cement Retarder (Amendment 1) | |
| Gypsum for Portland Cement Retarder | |
| Heat Absorbing Glass | |
| Heat-Strengthened Glass | |
| High Alumina and Fire Clay Castable Refractories | |
| High Alumina and Fire Clay Plastic Refractories | |
| High alumina brick (Amendment 1) | |
| High Alumina Brick | |
| High Purity Graphite Material | |
| Industrial Limes | |
| Inserted Nut Abrasive Discs and Inserted Nut Ring Wheels | |
| Insulating Fire Bricks | |
| Interchangeable Conical Ground Glass Joints (Full Length) | |
| Interchangeable Conical Ground Glass Joints (Medium Length) | |
| Interchangeable Conical Ground Glass Joints (Short Length) | |
| Interchangeable Conical Ground Glass Joints for Narrow Mouth Bottle | |
| Interchangeable Conical Ground Glass Joints for Volumetric Flask | |
| Interchangeable Spherical Glass Joints | |
| Laminated glass | |
| Laminated Glasses | |
| Lead Glass for X-Ray Protection | |
| Light source for test of photocatalytic materials used under ultraviolet | |
| Light Weight Castable Refractories | |
| Magnesia brick (Amendment 1) | |
| Magnesia Brick | |
| Magnesia Grinding Wheels | |
| Maximum Operating Speed of Grinding Wheels | |
| Measurement method for dielectric properties of fine ceramics in millimeter wave frequency range - Part 1: Cutoff waveguide method | |
| Measurement method for dielectric properties of fine ceramics in millimeter wave frequency range - Part 2: Open resonator method | |
| Measurement method for dielectric properties of fine ceramics in millimeter wave frequency range - Part 3: Dielectric resonator method excited by NRD-guide | |
| Measurement method for emissivity of fine ceramics and ceramic matrix composites - Part 1: Normal spectral emissivity by black body reference method using FTIR | |
| Measurement method for emissivity of fine ceramics and ceramic matrix composites - Part 2: Normal emissivity by reflective method using FTIR | |
| Measurement method for emissivity of fine ceramics and ceramic matrix composites - Part 3: Hemispherical total emissivity by direct heating calorimetry | |
| Measurement methods for reflectivity of electromagnetic wave absorber in millimetre wave frequency | |
| Measurement of lattice parameters and crystallite sizes of carbon materials | |
| Measurement of spectral reflectance of fine ceramics thin films under humid condition | |
| Measurement of spectral transmittance of fine ceramic thin films under humid condition | |
| Measuring method for the homogeneity of glasses by laser interferometry | |
| Measuring Method of the Linear Thermal Expansion Coefficient for Low Expansion Glass by Laser Interferometry | |
| Measuring Method of Thermal Expansion of Fine Ceramics by Thermomechanical Analysis | |
| Measuring Methods for the Specific Surface Area of Fine Ceramic Powders by Gas Adsorption Using the BET Method | |
| Measuring Methods of Surface Resistivity for Glass Substrates | |
| Metal Joint for Conical Flange Pipes of Acid Proof Porcelains for Chemical Industry | |
| Method for Chemical Analysis of Aluminous Abrasives | |
| Method for Chemical Analysis of Portland Cement | |
| Method for chemical analysis of silicon carbide abrasives (Amendment 1) | |
| Method for Chemical Analysis of Silicon Carbide Abrasives | |
| Method for conductivity measurement of ion-conductive fine ceramics | |
| Method for measurement of fine ceramics thermoelectric materials Part 3: Thermal diffusity, specific heat capacity, and thermal conductivity | |
| Method for measurement of pyroelectric coefficient of fine ceramics | |
| Method for measurement of thixotropy behavior with a rotational viscometer of ceramics slurry | |
| Method for measurement of viscosity with a rotational viscometer of ceramics slurry | |
| Method for the spectral radiant energy measurement of far infrared heaters specified in the far infrared region | |
| Method for X-Ray Fluorescence Spectrometric Analysis of Refractory Bricks and Refractory Mortars | |
| Method of Inspection for Dimension of Refractory Bricks | |
| Method of measuring spectral emissivity of ceramic radiating materials of infrared heaters by using FTIR | |
| Method of Measuring Warpage of Refractory Bricks | |
| Method of Physical Test for Plaster of Paris Mold for Pottery (Amendment 1) | |
| Method of Physical Test for Plaster of Paris Mold for Pottery | |
| Method of Sintering Test for Fused Aluminous Abrasives | |
| Method of test for permanent linear change on castable refractories (Amendment 1) | |
| Method of test for permanent linear change on castable refractories | |
| Method of test for permanent linear change on light weight castable refractories (Amendment 1) | |
| Method of test for permanent linear change on light weight castable refractories | |
| Method of Test for Permanent of Linear Change on High Alumina and Fireclay Plastic Refractories | |
| Method of Test for Softening Point of Glass | |
| Method of Test for Strain Point of Glass | |
| Method of Testing for Ceramic Coating | |
| Methods for chemical analysis of aluminum oxide powders for fine ceramics | |
| Methods for chemical analysis of boron carbide raw materials for refractory products | |
| Methods for Chemical Analysis of Borosilicate Glasses | |
| Methods for chemical analysis of cements (Amendment 1) | |
| Methods for chemical analysis of fine aluminum nitride powders for fine ceramics | |
| Methods for Chemical Analysis of Fine Silicon Carbide Powders for Fine Ceramics | |
| Methods for Chemical Analysis of Fine Silicon Nitride Powders for Fine Ceramics | |
| Methods for chemical analysis of magnesium oxide powders for fine ceramics | |
| Methods for chemical analysis of refractories containing alumina and magnesia | |
| Methods for chemical analysis of refractories containing alumina, zirconia and silica | |
| Methods for chemical analysis of refractories containing carbon and/or silicon-carbide | |
| Methods for chemical analysis of refractories containing zircon and/or zirconia | |
| Methods for chemical analysis of refractory products - Part 1: Fireclay refractories | |
| Methods for chemical analysis of refractory products - Part 2: Silica refractories | |
| Methods for chemical analysis of refractory products - Part 3: High alumina refractories | |
| Methods for chemical analysis of refractory products - Part 4: Magnesite and/or dolomite refractories | |
| Methods for chemical analysis of refractory products - Part 5: Chrome-magnesia refractories | |
| Methods for Chemical Analysis of Soda-Lime-Magnesia-S ilica Glasses | |
| Methods for determination of cadmium, chromium and lead in glasses | |
| Methods for determination of sulfur in refractory products and raw materials - part 1: Gravimetric and titrimetric methods | |
| Methods for determination of sulfur in refractory products and raw materials - Part 2: Instrumental analysis | |
| Methods for determination of yttrium oxide in stabilized zirconia powders for fine ceramics | |
| Methods for Sampling of Abrasive Grains | |
| Methods for surface temperature measurement of far infrared heaters by thermocouples | |
| Methods for the quantitative phase analysis of silicon nitride | |
| Methods of Adhesion Test for Silica Coating of Glass Substrate | |
| Methods of Measuring Dimensions of Refractory Bricks | |
| Mounted Wheels | |
| Patterned glass (Amendment 1) | |
| Pendulum impact test method for glass in building | |
| Physical Testing Method of Aluminous Cement for Refractories | |
| Physical Testing Methods for Cement | |
| Physical Testing Methods for High Purity Graphite Material | |
| Plaster of Paris Mold for Pottery (Amendment 1) | |
| Plaster of Paris Mold for Pottery | |
| Portland blast-furnace slag cement (Amendment 1) | |
| Portland Blast-Furnace Slag Cement | |
| Portland cement (Amendment 1) | |
| Portland Cement | |
| Portland fly-ash cement (Amendment 1) | |
| Portland Fly-Ash Cement | |
| Portland pozzolan cement (Amendment 1) | |
| Portland Pozzolan Cement | |
| Quality Standard of Porcelain Enamelled Products | |
| Refractory Mortars (Amendment 1) | |
| Refractory Mortars | |
| Reinforcement products - Determination of moisture content | |
| Reinforcement yarns - Determination of linear density | |
| Reinforcement yarns - Determination of twist | |
| Resinoid Cutting-Off Wheels | |
| Resinoid Grinding Wheels | |
| Rubber Cutting-Off Wheels | |
| Safety Glass For Railway Rolling Stock (Amendment 1) | |
| Safety Glass for Railway Rolling Stock | |
| Safety Glass for Road Vehicles | |
| Sample Preparation Method of Fine Ceramics and Fine Ceramic Powders for Scanning Electron Microscope Observation | |
| Sampling Method for Castable Refractories | |
| Sampling Method for High Aluminous Plastic Refractories and Fireclay Plastic Refractories | |
| Sampling Method for Lightweight Castable Refractories | |
| Sealed Insulating Glass | |
| Seger Cone | |
| Segment Grinding Wheels | |
| Shape and Dimension of Refractory Bricks for Cupola | |
| Shape and Dimension of Refractory Bricks for Open-Hearth Furnace | |
| Shape and Dimension of Refractory Bricks for Rotary Kiln | |
| Shape and Dimension of Refractory Bricks | |
| Shapes and Dimensions of Grinding Wheels | |
| Sheet Glasses | |
| Silica Brick for Coke Oven | |
| Silica Brick | |
| Silicon Carbide Electric Heating Element | |
| Slide Glass for Microscope | |
| Solar Reflective Glass | |
| Specifications of Fireclay Bricks for Ladle Lining | |
| Standard Recommended Practice for Selection of Coated Abrasives | |
| Statistical analysis for influence of machining damage on strength of fine ceramics | |
| Tempered fire resistance glass | |
| Tempered glass (Amendment 1) | |
| Tempered Glasses | |
| Test method for abrasion resistance of refractory products - Part 1: Method at room temperature | |
| Test method for abrasion resistance of refractory products - Part 2: Method at elevated temperature | |
| Test Method for Cold Crushing Strength of Refractory Bricks | |
| Test method for compressive behavior of continuous fiber-reinforced ceramic matrix composites at room temperature | |
| Test method for fracture resistance of fine ceramics at room temperature by indentation fracture (IF) method | |
| Test method for modulus of rupture of refractory bricks (Amendment 1) | |
| Test Method for Modulus of Rupture of Refractory Bricks | |
| Test method for open hole tension of continuous fiber-reinforced ceramic matrix composites at room temperature | |
| Test Method for Permanent Linear Change of Refractory Brick on Reheating | |
| Test method for piezoelectric constant d33 of piezoelectric ceramics by direct quasi-static method | |
| Test method for piezoelectric strain of fine ceramics at high electric field | |
| Test Method for Resistivity of Conductive Fine Ceramic Thin Films with a Four-Point Probe Array | |
| Test method for surface roughness of ceramic thin films by atomic force microscopy | |
| Test Method for Tensile Creep of FIne Ceramics | |
| Test Method for the Rate of Linear Change of Refractory Brick on Heating | |
| Test Method for Thickness of Fine Ceramic Thin Films - Film Thickness by Contact Probe Profilometer | |
| Test Method of Glass Apparatus for Chemical Analysis | |
| Test method of porous fine ceramics for dust collection | |
| Test Method of Safety Glass for Road Vehicles | |
| Test Method of Safety Glazing Materials for Road Vehicles (Amendment 1) | |
| Test Methods for Adhesion of Thin Films on Glass Substrate | |
| Test methods for bulk density of fine ceramic powder | |
| Test methods for density and apparent porosity of fine ceramics | |
| Test methods for physical properties of graphite materials | |
| Test methods for pore size distribution of fine ceramic green body by mercury porosimetry | |
| Test Methods for Static Bending Fatigue of Fine Ceramics | |
| Test methods for tensile strength of fine ceramic joint | |
| Test methods for thermal conductivity of refractory materials - Part 1: Hot-wire method (cross-array) | |
| Test methods for thermal conductivity of refractory materials - Part 2: Hot-wire method (parallel) | |
| Test methods for thermal conductivity of refractory materials - Part 3: Stationary heat flow method | |
| Test methods for thermal expansion of refractory products - Part 1: Non-contact method | |
| Test methods for thermal expansion of refractory products -- Part 3: Contact method using rod test piece | |
| Test methods for thermal expansion rate of refractory products -- Part 2: Contact method using cylinder test piece | |
| Test methods for thermal expansion under load of refractory products | |
| Test Methods for Visible Light Transmittance of Fine Ceramic Thin Films | |
| Test methods of iso-electric point of fine ceramic powders | |
| Test methods of properties of fine ceramic granules Part 1: Size distribution of granules | |
| Test methods of properties of fine ceramic granules Part 2: Bulk density | |
| Test methods of properties of fine ceramic granules Part 3: Drying loss | |
| Test methods of properties of fine ceramic granules Part 4: Flowability | |
| Test methods of properties of fine ceramic granules Part 5: Compressive strength of a single granule | |
| Test methods of properties of fine ceramic granules Part 6: Compressive behavior of the granule beds | |
| Testing Method for Adaptation Assessment of High Performance Ceramics Under High Temperature and High Pressure | |
| Testing method for apparent porosity, water absorption specific gravity of refractory bricks | |
| Testing Method for Average Linear Thermal Expansion of Glass | |
| Testing Method for Bending Creep of High Performance Ceramics | |
| Testing method for bending fatigue of porous fine ceramics at room temperature | |
| Testing method for bending strength of fine ceramic joint | |
| Testing method for bending strength of porous fine ceramics | |
| Testing Method for Bulk Density of Artificial Abrasives | |
| Testing Method for Bulk Specific Gravity of Light Weight Castable Refractories (Method for Molded Goods) | |
| Testing Method for Capillarity of Artificial Abrasives | |
| Testing method for cavitation erosion of fine ceramics | |
| Testing Method for Chemical Durabilities of Fluoride Glasses | |
| Testing Method for Coefficient of Linear Variation of Refractory Mortar | |
| Testing method for compressive behavior of continuous fiber-reinforced ceramic composites at elevated temperature | |
| Testing Method for Compressive Creep of Refractry Bricks | |
| Testing Method for Cone Penetration of Refractory Mortars | |
| Testing Method for Corrosion of High Performance Ceramics in Acid and Alkaline Solutions; (Errata-1994) | |
| Testing Method for Corrosion of High Performance Ceramics in Acid and Alkaline Solutions | |
| Testing method for creep behavior of continuous fiber-reinforced ceramic composites under tensile loading at elevated temperature | |
| Testing method for crushing strength and modulus of rupture of castable refractories (Amendment 1) | |
| Testing method for crushing strength and modulus of rupture of castable refractories | |
| Testing Method for Crushing Strength and Modulus of Rupture of High Alumina and Fireclay Plastic Refractories | |
| Testing Method for Crushing Strength of Insulating Fire Bricks | |
| Testing method for determining particle retention in liquid for porous fine ceramics | |
| Testing Method for Determining Pickling Weight Loss of Sheet Steel for Vitreous and Porcelain Enamelling | |
| Testing Method for Dielectric Properties of Fine Ceramics at Microwave Frequency | |
| Testing method for fatigue behavior of continuous fiber-reinforced ceramic composites at room temperature under constant amplitude | |
| Testing method for fine ceramics thermoelectric materials Part 1: Thermoelectric power | |
| Testing method for fine ceramics thermoelectric materials Part 2: Resistivity | |
| Testing Method for Flexural Strength (Modulus of Rupture) of High Performance Ceramics at Elevated Temperature | |
| Testing Method for Flexural Strength (Modulus of Rupture) of High Performance Ceramics | |
| Testing method for flexural strength of continuous fiber-reinforced ceramic matrix composites | |
| Testing method for fracture energy of fiber-reinforced ceramic matrix composites | |
| Testing Method for Fracture Toughness of Fine Ceramics at Elevated Temperature | |
| Testing method for fracture toughness of porous fine ceramics | |
| Testing method for gas permeability of porous ceramics using solid oxide fuel cell | |
| Testing method for grain size in microstructure of fine ceramics | |
| Testing Method for Grain Size of Castable Refractories | |
| Testing Method for Grain Size of Coated Abrasive Macrogrits (P12 - P220) | |
| Testing Method for Grain Size of Coated Abrasive Microgrits (P240 - P1200) | |
| Testing method for grain size of light weight castable refractories | |
| Testing Method for Grain Size of Refractory Mortar | |
| Testing Method for Heat of Hydration of Cement | |
| Testing Method for Hydration Resistance of Basic Bricks | |
| Testing method for jet water erosion of fine ceramics | |
| Testing method for macro-heterogeneity in microstructure of fine ceramics | |
| Testing Method for Magnetic Matter in Artificial Abrasives | |
| Testing method for modulus of rupture of insulating fire bricks (Amendment 1) | |
| Testing Method for Modulus of Rupture of Insulating Fire Bricks | |
| Testing Method for Modulus of Rupture of Refractory Bricks and Insulating Fire Bricks at Elevated Temperature | |
| Testing Method for Permeability to Gases of Refractory Bricks | |
| Testing Method for pH of Artificial Abrasives | |
| Testing Method for Refractoriness of Fireclay Plastic Refractories | |
| Testing Method for Refractoriness of Refractory Brick | |
| Testing Method for Refractoriness Under Load of Refractory Bricks | |
| Testing Method for Reheat Shrinkage of Insulating Fire Bricks | |
| Testing Method for Setting Time of Refractory Mortars | |
| Testing Method for Size Distribution of Fine Ceramic Particles by Liquid Photosedimentation Method | |
| Testing Method for Slag Corrosion of Refractories Using Crucibles | |
| Testing Method for Solderberg Paste | |
| Testing Method for Spalling of Refractory Bricks and Insulating Fire Bricks | |
| Testing Method for Specific Gravity and True Porosity of Insulating Fire Bricks | |
| Testing Method for Specific Gravity of Artificial Abrasives | |
| Testing method for sphere indentation of porous fine ceramics | |
| Testing method for tensile behavior of continuous fiber reinforced ceramic matrix composites at elevated temperatures | |
| Testing Method for the Rate of Linear Change of Castable Refractories | |
| Testing Method for the Rate of Linear Change of High Alumina and Fire Clay Plastic Refractories | |
| Testing Method for Thermal Conductivity of Insulating Fire Bricks by Hot Wire | |
| Testing Method for Thermal Conductivity of Insulating Fire Bricks by Water Circulation | |
| Testing Method for Thermal Expansion and Shrinkage of Insulating Fire Bricks | |
| Testing method for thermal fatigue of fine ceramics substrate | |
| Testing method for thermal shock resistance of fine ceramics | |
| Testing method for thermal shock resistance of porous fine ceramics | |
| Testing method for vickers hardness of fine ceramics at elevated temperatures | |
| Testing Method for Vickers Hardness of High Performance Ceramics | |
| Testing Method for Water Content of High Aluminous Plastic Refractories and Fireclay Plastic Refractories | |
| Testing method for water permeability and hydraulic equivalent diameter of porous fine ceramics | |
| Testing method for wear resistance of fine ceramics by ball-on-disk method at elevated temperatures | |
| Testing method for wear resistance of fine ceramics under lubrication by ball-on-disc method | |
| Testing Method for Wear Resistance of High Performance Ceramics by Ball-On-Disk Method | |
| Testing Method for Workability Index of Fireclay Plastic | |
| Testing method of wettability of glass substrate | |
| Testing Method on Transmittance and Reflectance for Daylight and Solar Radiation and Solar Heat Gain Coefficient of Flat Glass | |
| Testing Methods for Abrasive Grain Size | |
| Testing Methods for Artificial Graphite Electrodes | |
| Testing methods for bending fatigue of fine ceramics at elevated temperatures | |
| Testing Methods for Bending Fatigue of Fine Ceramics at Room Temperature | |
| Testing Methods for Carbon Blocks | |
| Testing Methods for Carbon Fibers | |
| Testing methods for carbon fibre woven fabrics (Amendment 1) | |
| Testing Methods for Carbon Fibre Woven Fabrics | |
| Testing methods for cold compressive strength of refractory bricks - Part 1: Test without packing | |
| Testing methods for cold compressive strength of refractory bricks - Part 2: Test with packing | |
| Testing Methods for Compressive Strength of High Performance Ceramics (Errata-1994) | |
| Testing methods for dielectric propties of fine ceramic plates at microwave frequency | |
| Testing methods for elastic modulus of continous fiber-reinforced ceramic matrix composites | |
| Testing Methods for Elastic Modulus of High Performance Ceramics at Elevated Temperature | |
| Testing Methods for Elastic Modulus of High Performance Ceramics | |
| Testing methods for elastic modulus of porous fine ceramics | |
| Testing methods for elution by dipping in water of fine ceramics | |
| Testing Methods for Fracture Toughness of High Performance Ceramics | |
| Testing methods for interlaminar shear strength of continuous fiber-reinforced ceramic composites | |
| Testing Methods for Oxidation Resistance of Non-Oxide High Performance Ceramics | |
| Testing Methods for Particle Density of Fine Ceramic Powder | |
| Testing methods for screw precision of cylindrical machined graphite electrodes | |
| Testing methods for taper screw thread angle and pitch diameter of cylindrical machined graphite electrodes (Amendment 1) | |
| Testing Methods for Tensile Strength of High Performance Ceramics at Room and Elevated Temperature | |
| Testing methods for tensile stress-strain behavior of continuous fiber reinforced ceramic matrix composites at room temperature | |
| Testing Methods for Textile Glass Products | |
| Testing methods of continuous ceramic fibers for continuous fiber-reinforced ceramic matrix composites | |
| Testing Methods of Grinding Wheels | |
| Testing Methods of Thermal Diffusivity, Specific Heat Capacity, and Thermal Conductivity for High Performance Ceramics by Laser Flash Method | |
| Textile Finished Glass Fabrics for Bag Filter | |
| Textile Finished Glass Tapes | |
| Textile Glass Chopped Strand Mats | |
| Textile Glass Chopped Strands | |
| Textile Glass Fabric Curtains for Casement and Drapery | |
| Textile Glass Fabrics for Surfacing | |
| Textile Glass Fabrics | |
| Textile Glass Rovings | |
| Textile glass tapes | |
| Textile Glass Yarns | |
| The test method for internal friction test of fine ceramics at elevated temperatures - Part 1: Free decay method by the torsion pendulum | |
| The testing method for internal friction of fine ceramics at elevated temperatures - Part 2: Flexural resonance method | |
| Tower Packings of Acid Proof Porcelains for Chemical Industry | |
| Tube Bottle for Injections | |
| Vacuum insulating glass | |
| Vials for Injection | |
| Viscosity and viscometric fixed points of glass - Part 1: Determination of softening point | |
| Viscosity and viscometric fixed points of glass - Part 2: Determination of annealing point and strain point by fiber elongation | |
| Viscosity and viscometric fixed temperature of glass - Part 3: Determination of dilatometric transformation temperature | |
| Vitrified Grinding Wheels | |
| Volumetric Glassware | |
| Waterproof Abrasive Papers | |
| Weibull statistics of strength data for fine ceramics | |
| Wired Glasses | |
| Woven Roving Glass Fabrics |
| << Prev | Next >> |