Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
600
650
700
750
800
850
870
880
890
900
910
920
925
926
927
928
929
930
931
932
933
934
935
936
937
940
950
960
970
980
990
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 1: Measurement at Discrete Points | |
| Acoustics - Determination of Sound Power Levels of Noise Sources Using Sound Intensity - Part 2: Measurement by Scanning | |
| Acoustics - Measurement of Airborne Noise Emitted by Earthmoving Machinery - Operator's Position - Stationary Testing Condition | |
| Acoustics Agricultural and forestry wheeled tractors and self-propelled machines Measurement of noise emitted when in motion | |
| Acoustics Measurement at the operator\x92s position of noise emitted by earth-moving machinery Dynamic test conditions | |
| Acoustics Measurement of exterior noise emitted by earth-moving machinery Dynamic test conditions | |
| Acoustics Measurement of exterior noise emitted by earth-moving machinery Stationary test conditions | |
| Activities relating to drinking water and wastewater services - Guidelines for the assessment and for the improvement of the service to users | |
| Activities relating to drinking water and wastewater services - Guidelines for the management of drinking water utilities and for the assessment of drinking water services | |
| Activities relating to drinking water and wastewater services - Guidelines for the management of wastewater utilities and for the assessment of wastewater services | |
| Analytical Method for Water Soluble Chlorides in Paper and Paperboard | |
| Art Papers | |
| Asset management - Management systems - Guidelines for the application of JIS Q 55001 | |
| Asset management - Management systems - Requirements | |
| Asset management - Overview, principles and terminology | |
| Base Paper of Continuous Business Forms | |
| Biotechnology-Cell manufacturing Process Management System (CPMS) | |
| Board - Determination of bursting strength | |
| Board - Determination of Stiffness by Taber Stiffness Tester | |
| Calibration in analytical chemistry and use of certified reference materials | |
| Cellulose in Dilute Solutions - Determination of limiting viscosity number - Method in cupri-ethylene - diamine (CED) solution | |
| Certification of Reference Materials - General and Statistical Principles | |
| Chromium Ores - Determination of Chromium Content | |
| Chromium Ores - Determination of Silicon Content | |
| Chromium Ores - Determination of Sulfur Content | |
| Clay Pipes | |
| Coal - Determination of total mercury content | |
| Coal - Testing Methods (Amendment 1) | |
| Coal and coke - Determination of constituents (Amendment 1) | |
| Coal and coke - Determination of total moisture content of a lot | |
| Coal and Coke - Mechanical Methods for Ultimate Analysis | |
| Coal and coke - methods for proximate analysis (Amendment 1) | |
| Coal and Coke - Methods for Proximate Analysis | |
| Common Bricks | |
| Conditioning of Paper and Paperboard for Test | |
| Conformity assessment - Code of good practice | |
| Conformity assessment - Conformity assessment for Japanese Industrial Standards - General guidance on a third-party certification system for products | |
| Conformity assessment - Conformity assessment for Japanese Industrial Standards - General guidance on a third-party certification system for steel products | |
| Conformity assessment - Conformity assessment for Japanese Industrial Standards - Guidance on a third-party certification system for precast concrete products | |
| Conformity assessment - Conformity assessment for Japanese Industrial Standards - Guidance on a third-party certification system for Ready-mixed concrete products | |
| Conformity assessment - Conformity assessment for Japanese Industrial Standards - Guidance on a third-party certification system for steel products | |
| Conformity assessment - Fundamentals of product certification and guidelines for product certification schemes | |
| Conformity assessment - Fundamentals of product certification | |
| Conformity assessment - General requirements for accreditation bodies accrediting conformity assessment bodies | |
| Conformity Assessment - General Requirements for Bodies Operating Certification of Persons | |
| Conformity assessment - General requirements for peer assessment of conformity assessment bodies and accreditation bodies | |
| Conformity assessment - General requirements for proficiency testing | |
| Conformity Assessment - General Requirements for third-party marks of conformity | |
| Conformity assessment - Guidelines for supplier's declaration of conformity with product standards | |
| Conformity assessment - Requirements for bodies certifying products, processes and services | |
| Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 100: Additional competence requirements for auditing and certification of occupational health and safety management systems... | |
| Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 10: Competence requirements for auditing and certification of occupational health and safety management systems | |
| Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 1: Requirements | |
| Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 2: Competence requirements for auditing and certification of environmental management systems | |
| Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 3: Competence requirements for auditing and certification of quality management systems | |
| Conformity assessment - Requirements for bodies providing audit and certification of management systems | |
| Conformity Assessment - Supplier\xb4s declaration of conformity - Part 1: General requirements | |
| Conformity Assessment - Supplier\xb4s declaration of conformity - Part 2: Supporting documentation | |
| Conformity assessment - Vocabulary and general principles | |
| Conformity assessment -- Code of good practice | |
| Conformity assessment -- General principles and requirements for validation and verification bodies | |
| Conformity assessment-Conformit y assessment for Japanese Industrial Standards-General guidance on a third-party certification system for products (Amendment 1) | |
| Conformity assessment-Conformit y assessment for Japanese Industrial Standards-Guidance on a third-party certification system for precast concrete products (Amendment 1) | |
| Conformity assessment-Conformit y assessment for Japanese Industrial Standards-Guidance on a third-party certification system for Ready-mixed concrete products (Amendment 1) | |
| Conical Flanged 45 Degree Bent Pipes of Acid Proof Porcelains for Chemical Industry | |
| Conical Flanged 90 Degree Bent Pipes of Acid Proof Porcelains for Chemical Industry | |
| Conical Flanged Straight Pipes of Acid Proof Porcelains for Chemical Industry | |
| Conical Flanged Tee Pipes of Acid Proof Porcelains for Chemical Industry | |
| Corrugating Media | |
| Cranes - Safety Signs and Hazard Pictorials - General Principles | |
| Determination of Basis Weight of Paper | |
| Determination of Calcium in Titanium Ores | |
| Determination of Calorific Value of Coal and Coke; (Erratum) | |
| Determination of Chromium in Titanium Ores | |
| Determination of Iron in Titanium Ores | |
| Determination of Magnesium in Titanium Ores | |
| Determination of Manganese in Titanium Ores | |
| Determination of Refined Sulfur | |
| Determination of Silicon in Titanium Ores | |
| Determination of Titanium in Titanium Ores | |
| Determination of Vanadium in Titanium Ores | |
| Diazo Sensitized Papers | |
| Diazotype Base Paper | |
| Drawing Papers | |
| Earth -moving machinery Tractor -scraper volumetric rating | |
| Earth-Moving Machinery - Hydraulic Excavators - Lift Capacity | |
| Earth-Moving Machinery - Tractors - Terminology and Commercial Specifications | |
| Earth-moving machinery Crawler and wheel tractor dozer blades Volumetric ratings | |
| Earth-moving machinery Definitions of dimensions and symbols Part 1: Base machine | |
| Earth-moving machinery Determination of ground speed | |
| Earth-moving machinery Determination of slope limits for machine fluid systems operation Static test method | |
| Earth-moving machinery Determination of turning dimensions of wheeled machines | |
| Earth-moving machinery Dumper bodies Volumetric rating | |
| Earth-moving machinery Dumpers Terminology and commercial specifications | |
| Earth-moving machinery Electromagnetic compatibility | |
| Earth-moving machinery Elevating scrapers Volumetric ratings | |
| Earth-moving machinery Graders Terminology and commercial specifications | |
| Earth-moving machinery Human physical dimensions of operators and minimum operator space envelope | |
| Earth-moving machinery Laboratory evaluation of operator set vibration | |
| Earth-moving machinery Loader and front loading excavator buckets Volumetric ratings | |
| Earth-moving machinery Machine-mounted forward and reverse audible warning alarm Sound test method | |
| Earth-moving machinery Machine-mounted retrieval device Performance requirements | |
| Earth-moving machinery Method for locating the centre of gravity | |
| Earth-moving machinery Method of test for the measurement of drawbar pull | |
| Earth-moving machinery Methods of measuring the masses of whole machines, their equipment and components | |
| Earth-moving machinery Pipelayers Definitions and commercial specifications | |
| Earth-moving machinery Roll-over protective structures Laboratory tests and performance requirements | |
| Earth-moving machinery Tip-over protection structure (TOPS) for compact excavators Laboratory tests and performance requirements | |
| Earth-moving machinery Units for dimensions, performance and capacities, and their measurement accuracies | |
| Earth-moving machinery Zones of comfort and reach for controls | |
| Earthmoving and Other Machinery - Crawler Machines - Performance Requirements and Test Procedures for Braking Systems | |
| Earthmoving Machinery - Braking Systems of Rubber-Tired Machines - Systems and Performance Requirements and Test Procedures | |
| Earthmoving Machinery - Dumper Body Support and Operator's Cab Tilt Support | |
| Earthmoving Machinery - Dumpers - Terminology and Commercial Specifications | |
| Earthmoving Machinery - Falling-Object Protective Structures - Laboratory Tests and Performance Requirements | |
| Earthmoving Machinery - Graders - Terminology and Commercial Specifications | |
| Earthmoving Machinery - Hydraulic Excavators - Terminology and Commercial Specifications | |
| Earthmoving Machinery - Lift Capacity of Pipelayers and Wheeled Tractors or Loaders Equipped with Side Boom | |
| Earthmoving Machinery - Tractor Scrapers - Terminology and commercial Specifications | |
| Earthmoving Machinery - Trenchers - Definitions and Commercial Specifications | |
| Earthmoving Machinery - Volumetric Rating for Backhoe Buckets | |
| Earthmoving Machinery-Basic Types-Vocabulary | |
| Energy management systems - Requirements for bodies providing audit and certification of energy management systems | |
| Energy management systems - Requirements with guidance for use | |
| Energy management systems -- Guidance for implementing a common energy management system in multiple organizations | |
| Energy management systems-Requirements with guidance for use (Amendment 1) | |
| Envirnmental Management - Vocabulary | |
| Enviromental labels and declarations - General principles | |
| Enviromental labels and declarations - Self-declared enviromental claims (Type II environmental labelling) | |
| Enviromental labels and declarations - Type I environmental labelling - Principles and procedures | |
| Enviromental management - Environmental performance evaluation - Guidelines | |
| Environmental labels and declarations - Type III environmental declarations - Principles and procedures | |
| Environmental management - Environmental assessment of sites and organizations (EASO) | |
| Environmental management - Environmental communication - Guidelines and examples | |
| Environmental Management - Life Cycle Assessment - Goal and Scope Definition and Inventory Analysis | |
| Environmental management - Life cycle assessment - Life cycle impact assessment | |
| Environmental management - Life cycle assessment - Life cycle interpretation | |
| Environmental Management - Life Cycle Assessment - Principles and Framework | |
| Environmental management - Life cycle assessment - Requirements and guidelines | |
| Environmental management - Material flow cost accounting - General framework | |
| Environmental management for concrete and concrete structures - Part 1: General principles | |
| Environmental management for concrete and concrete structures - Part 2: System boundary and inventory data | |
| Environmental management for concrete and concrete structures -- Part 4: Environmental design of concrete structures | |
| Environmental Management Systems - General Guidelines on Principles, Systems and Supporting Techniques | |
| Environmental management systems - Guidelines for incorporating ecodesign | |
| Environmental management systems - Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation | |
| Environmental Management Systems - Specification with Guidance for Use | |
| Environmental management systems-Requirements with guidance for use (Amendment 1) | |
| Environmentally conscious design -- Principles, requirements and guidance | |
| Facility management -- Management systems -- Requirements with guidance for use | |
| Facility management-Managemen t systems-Requirements with guidance for use (Amendment 1) | |
| Filter Paper (for Chemical Analysis) | |
| Full-Scale Side Impact Test Procedure | |
| General Criteria for Supplier's Declaration of Conformity | |
| General criteria for the operation of various types of bodies performing inspection | |
| General requirements for biobanking | |
| General requirements for bodies operating assessment and certification/regist ration of environmental management systems (EMS) | |
| General Requirements for Bodies Operating Product Certification Systems | |
| General Requirements for the Competence of Reference Material Producer | |
| General requirements for the competence of reference material producers | |
| General requirements for the competence of testing and calibration laboratories | |
| General Rule for Chemical Analysis of Titanium Ores | |
| General Rules for Chemical Analysis of Chrome Ores | |
| General Rules for Sampling, Analysis and Testing of Coal and Coke | |
| General rules of acid proof porcelains for chemical industry | |
| Glossary of Terms Used in Pulps and Papers Industry | |
| Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals | |
| Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements | |
| Greenhouse gases - Part 3: Specification with guidance for the validation and verification of greenhouse gas assertions | |
| Greenhouse gases - Requirements for greenhouse gas validation and verification bodies for use in accreditation or other forms of recognition | |
| Greenhouse gases-Competence requirements for greenhouse gas validation teams and verification teams | |
| Guidance on project management | |
| Guide for the Inclusion of Environmental Aspects in Product Standards | |
| Guidelines for Development and Implementation of Risk Management System | |
| Guidelines for Environmental Auditing - Audit Procedures - Auditing of Environmental Management Systems | |
| Guidelines for Environmental Auditing - General Principles | |
| Guidelines for Environmental Auditing - Qualification Criteria for Environmental Auditors | |
| Guidelines for Quality and/or Environmental Management Systems Auditing | |
| Guidelines for the selection of quality management system consultants and use of their services | |
| Hard Coal - Determination of Moisture-Holding Capacity | |
| Heat Balancing of Cement Rotary Kiln | |
| Heat Balancing of Continuous Dryer for Ores and Other Materials | |
| Heat balancing of kiln and furnace for lime | |
| Heat balancing of pottery and refractory firing periodic kiln | |
| Heat balancing of pottery and refractory firing tunnel kiln | |
| High Frequency Combustion Crucibles for Chemical Analysis | |
| Information security, cybersecurity and privacy protection-Informati on security management systems-Requirements (Amendment 1) | |
| Information technology - Corporate governance of information technology | |
| Information technology - Security techniques - Code of practice for information security controls based on ISO/IEC 27002 for cloud services | |
| Information technology - Security techniques - Code of practice for information security management | |
| Information technology - Security techniques - Governance of information security | |
| Information technology - Security techniques - Information security management systems - Overview and vocabulary | |
| Information technology - Security techniques - Information security management systems - Requirements | |
| Information technology - Security techniques - Management of information and communications technology security - Part 1: Concepts and models for information and communications technology security management | |
| Information Technology - Security Techniques - Requirements For Bodies Providing Audit And Certification Of Information Security Management Systems | |
| Information technology - Service management - Part 1: Specification | |
| Information technology - Service management - Part 2: Code of practice | |
| Information technology-Artificia l intelligence-Managem ent system | |
| Inlet air cleaning equipment for internal combustion engines and compressors Performance testing | |
| Innovation management -- Innovation management system -- Guidance | |
| Iron ore and direct reduced iron - Vocabulary | |
| Iron Ore Pellets - Determination of Apparent Density and Porosity | |
| Iron ore pellets - Determination of crushing strength (Amendment 1) | |
| Iron ore pellets - Determination of free-swelling index (Amendment 1) | |
| Iron Ore Pellets - Determination of Swelling Index | |
| Iron Ore Pellets - Determination of Volume | |
| Iron ore sinter - Determination of shatter strength (Amendment 1) | |
| Iron ore-Determination of the decrepitation index | |
| Iron ores - Determination of hygroscopic moisture in analytical samples - Gravimetric, Karl Fischer titration and mass-loss methods | |
| Iron ores - Determination of low-temperature reduction-disintegra tion (Amendment 1) | |
| Iron Ores - Determination of Low-Temperature Reduction-Disintegra tion | |
| Iron Ores - Determination of Moisture Content of Consignment | |
| Iron ores - Determination of reducibility by the final degree of reduction index (Amendment 1) | |
| Iron Ores - Determination of Size Distribution by Sieving | |
| Iron ores - Determination of the mass and quality characteristic of a lot | |
| Iron ores - Determination of tumble strength (Amendment 1) | |
| Iron ores - Determination of tumble strength (Amendment 2) | |
| Iron ores - Experimental methods for checking the precision of sampling, sample preparation and measurement | |
| Iron ores - Experimental methods for evaluation of quality variation | |
| Iron Ores - Increment Sampling - Manual Method | |
| Iron Ores - Increment Sampling and Sample Preparation - Mechanical Method | |
| Iron Ores - Preparation of Samples - Manual Method | |
| Iron ores - Sampling and sample preparation procedures | |
| Iron ores -- Determination of bismuth -- Part 1: Bismuth iodide spectrophotometric method after separation of iron | |
| Iron ores -- Determination of bismuth -- Part 2: Flame atomic absorption spectrometric method after separation of iron | |
| Iron ores -- Determination of hygroscopic moisture in analytical samples -- Gravimetric, Karl Fischer titration and mass-loss methods (Amendment 1) | |
| Iron ores -- Determination of specific surface area -- Test method using air-permeability apparatus (Blaine) | |
| Iron ores -- Experimental methods for checking the bias of sampling | |
| JIS MACHINE ELEMENTS HANDBOOK (EXCLUDING FASTENERS & SCREW THREADS) | |
| JIS MACHINE TOOLS HANDBOOK | |
| JIS MECHANICAL INSTRUMENTATION HANDBOOK | |
| JIS MEDICAL DEVICES I HANDBOOK | |
| JIS MEDICAL DEVICES II HANDBOOK | |
| JIS MEDICAL DEVICES III HANDBOOK | |
| JIS MEDICAL DEVICES IV HANDBOOK | |
| JIS Medical Radiant Rays | |
| JIS METAL ANALYSIS I HANDBOOK - FERROUS | |
| JIS METAL ANALYSIS II HANDBOOK \x96 NON-FERROUS | |
| JIS METAL MATERIALS DATA HANDBOOK | |
| JIS METAL SURFACE TREATMENT HANDBOOK | |
| JIS MULTIMEDIA HANDBOOK | |
| JIS NON-FERROUS METALS AND METALLURGY HANDBOOK | |
| JIS NONDESTRUCTIVE INSPECTION HANDBOOK | |
| JIS OCCUPATIONAL SAFETY AND HEALTH HANDBOOK | |
| JIS OPTICAL INSTRUMENTS HANDBOOK | |
| JIS PACKAGING HANDBOOK | |
| JIS PAINTS & VARNISHES HANDBOOK | |
| JIS PAINTS AND VARNISHES HANDBOOK | |
| JIS PAPER & PULPS HDBK | |
| JIS Paper and Pulps Handbook | |
| JIS PETROLEUM HANDBOOK | |
| JIS PIPING I HANDBOOK | |
| JIS Piping II Handbook | |
| JIS PLASTICS I HANDBOOK | |
| JIS PLASTICS II HANDBOOK | |
| JIS PRESSURE VESSELS/BOILERS HANDBOOK | |
| JIS PULP AND PAPER HANDBOOK | |
| JIS PUMPS HANDBOOK | |
| Kraft Extensible Paper | |
| Kraft papers (Amendment 1) | |
| Kraft Papers | |
| Life cycle inventory calculation methodology for steel products | |
| Linerboards | |
| Machinery for Forestry - Wheeled Special Machines - Vocabulary, Performance Test Methods, and Criteria for Brake Systems | |
| Machinery for forestry Feller-bunchers Terms, definitions and commercial specifications | |
| Machinery for forestry Forwarders Terms, definitions and commercial specifications | |
| Machinery for forestry Knuckleboom log loaders Identification terminology, classification and component nomenclature | |
| Machinery for Forestry-Tracked Special Machines - Performance Criteria for Brake Systems, Standard | |
| Machinery for forestryWheeled skiddersTerms, definitions and commercial specifications | |
| Manganese Ores - Determination of Iron Content | |
| Manganese Ores - Determination of Manganese Content | |
| Manganese Ores - Determination of Silicon Content | |
| Manganese ores - Methods for determination of boron | |
| Manganese ores - Methods for determination of magnesium | |
| Manganese ores - Methods for determination of potassium | |
| Manganese ores - Methods for determination of sodium | |
| Measurement management systems - Requirements for measurement processes and measuring equipment | |
| Medical devices - Risk management - Part 1: Application of risk analysis | |
| Method for Determination of Aluminium Oxide in Chrome Ores | |
| Method for Determination of Magnesium Oxide in Chrome Ores | |
| Method for Determination of Mineral Matter in Coal | |
| Method for Determination of Niobium and Tantalum in Ores | |
| Method for Determination of Phosphorus in Chromium Ores | |
| Method for Determining Coefficient of Friction of Paper and Board | |
| Method for Measuring the Tumbler Strength of Iron Ore Pellets and Sinter | |
| Method for Sampling and Determination of Total Moisture and Adherent Moisture of Coal and Coke | |
| Method of Preparing Handmade Paper for Physical Tests of Pulp | |
| Method of Screening Test of Paper Pulp | |
| Method of Test for Ring Crush of Paperboard | |
| Method of Testing Dirt, Shivers and Specks of Paper Pulp | |
| Method of Testing Pitch Content of Paper Pulp | |
| Method of Testing Water Content of Lot of Paper Pulp | |
| Method of Testing Water Content of Sample of Paper Pulp | |
| Methods for Analysis of Coal Ash and Coke Ash | |
| Methods for chemical analysis of aluminosilicate raw materials for ceramics (Amendment 1) | |
| Methods for Chemical Analysis of Bauxite Ores | |
| Methods for Chemical Analysis of Dolomite | |
| Methods for Chemical Analysis of Feldspar | |
| Methods for chemical analysis of high-alumina raw materials for ceramics (Amendment 1) | |
| Methods for chemical analysis of high-alumina raw materials for ceramics | |
| Methods for chemical analysis of high-silica raw materials for ceramics (Amendment 1) | |
| Methods for Chemical Analysis of Limestone | |
| Methods for Chemical Analysis of Metallurgical Grade Fluorspar | |
| Methods for Chemical Analysis of Refractory Clay | |
| Methods for Chemical Analysis of Roseki | |
| Methods for Chemical Analysis of Silicastone | |
| Methods for Determination of Active Oxygen in Manganese Ores | |
| Methods for Determination of Aluminium Oxide in Manganese Ores | |
| Methods for Determination of Bismuth in Iron Ores | |
| Methods for Determination of Calcium Oxide in Manganese Ores | |
| Methods for Determination of Combined Water in Manganese Ores | |
| Methods for Determination of Copper in Manganese Ores | |
| Methods for Determination of Forms of Sulfur in Coal | |
| Methods for Determination of Iron in Chrome Ores | |
| Methods for Determination of Lead in Iron Ores | |
| Methods for Determination of Phosphorus in Manganese Ores | |
| Methods for Determination of Rare Earths in Ores | |
| Methods for Determination of Sulfur in Manganese Ores | |
| Methods for Determination of Thorium in Ores | |
| Methods for Determination of Tin in Iron Ores | |
| Methods for Determination of Uranium in Ores | |
| Methods for Determination of Yttrium in Ores | |
| Methods for Determination of Zinc in Iron Ores | |
| Methods for Industrial Analysis and Testing of Natural Graphite | |
| Methods for Testing of Coal | |
| Methods for Ultimate Analysis of Coal and Coke | |
| Methods of Microscopical Measurement for the Macerals and Reflectance of Coal | |
| Mining | |
| Natural Graphite | |
| Newsprints | |
| Non-Metallic Insulating Beads for Thermocouples | |
| Non-Metallic Protection Tubes for Thermocouples | |
| Occupational health and safety management systems - Requirements with guidance for use - Additional requirements for health and safety activities | |
| Occupational health and safety management systems - Requirements with guidance for use | |
| Paper and board - Accelerated ageing - Part 1: Dry heat treatment at 105 degrees C | |
| Paper and Board - Accelerated Ageing - Part 3: Moist Heat Treatment at 80 Degrees C and 65% Relative Humidity | |
| Paper and board - Compressive strength - Short-span test | |
| Paper and Board - Determination of Ash | |
| Paper and board - Determination of bending resistance - Part 1: Constant rate of deflection | |
| Paper and board - Determination of bending resistance - Part 2: Taber-type tester | |
| Paper and Board - Determination of Bursting Strength by Mollen Low-Pressure Tester | |
| Paper and Board - Determination of Bursting Strength by Mullen High-Pressure Tester | |
| Paper and board - Determination of colour (C/2 degree) - Diffuse reflectance method | |
| Paper and Board - Determination of Folding Endurance by MIT Tester | |
| Paper and board - Determination of opacity (paper backing) - Diffuse reflectance method | |
| Paper and board - Determination of roughness/smoothness (air leak methods) - Print-surf method | |
| Paper and board - Determination of smoothness - Open method | |
| Paper and Board - Determination of Tearing Resistance | |
| Paper and Board - Determination of Tensile Properties | |
| Paper and board - Measurement of hygroexpansivity - Part 1: Hygroexpansivity up to a maximum relative humidity of 68 % | |
| Paper and Board-Sampling for Testing | |
| Paper, board and pulps - Determination of pH of aqueous extracts - Part 1: Cold extraction | |
| Paper, board and pulps - Determination of pH of aqueous extracts - Part 2: Hot extraction | |
| Paper, board and pulps - Determination of residue (ash) on ignition at 525 degrees C | |
| Paper, board and pulps - Determination of residue (ash) on ignition at 900 degrees C | |
| Paper, board and pulps - Measurement of diffuse reflectance factor | |
| Paper-Determination of Stiffness by Clark Stiffness Tester | |
| Performance improvement of management systems - Guidelines for Daily Management | |
| Performance improvement of management systems - Guidelines for management by policy | |
| Performance improvement of management systems - Guidelines for procedures and methodology for continual improvement | |
| Performance improvement of management systems -- Guidelines for new product and service development management | |
| Performance improvement of management systems -- Guidelines for quality management education and training | |
| Performance improvement of management systems -- Guidelines for small group improvement activities | |
| Performance Improvement of Managenment Systems-Guidelines for Quality Function Deployment | |
| Performance improvements of management systems - Guideline for Quality Ensurance by Process | |
| Piping Handbook | |
| Porcelain basins for chemical analysis (Amendment 1) | |
| Porcelain basins for chemical analysis | |
| Porcelain Beakers for Chemical Analysis | |
| Porcelain Casserols for Chemical Analysis | |
| Porcelain Combustion Boats for Chemical Analysis | |
| Porcelain Combustion Tubes for Chemical Analysis | |
| Porcelain Crucibles for Chemical Analysis | |
| Printing Papers | |
| Proficiency testing by interlaboratory comparisons - Part 1: Development and operation of proficiency testing schemes | |
| Proficiency testing by interlaboratory comparisons - Part 2: Selection and use of proficiency testing schemes by laboratory accreditation bodies | |
| Project, programme and portfolio management -- Guidance on programme management | |
| Pulp and paper - Determination of the effective residual ink concentration (ERIC number) by infrared reflectance measurement | |
| Pulp, paper and board - Determination of total chlorine and organically bound chlorine | |
| Pulps - Determination of acetone-soluble matter | |
| Pulps - Determination of drainability - Part 1: Schopper-Riegler method | |
| Pulps - Determination of drainability - Part 2: "Canadian Standard" freeness method | |
| Pulps - Determination of Drainability | |
| Pulps - Determination of fiber length by automated optical analysis - Part 2: Unpolarized light method | |
| Pulps - Determination of fibre length by automated optical analysis - Part 1: Polarized light method | |
| Pulps - Determination of stock concentration | |
| Pulps - Determination of water retention value | |
| Pulps - Determination of Zero-Span Tensile Strength, Wet or Dry | |
| Pulps - Laboratory beating - Part 1: Beater method | |
| Pulps - Laboratory beating - Part 2: PFI mill method | |
| Pulps - Laboratory sheets - Determination of physical properties | |
| Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps | |
| Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 \xb0c | |
| Pulps - Laboratory wet disintegration | |
| Pulps - Measurement of Diffuse Blue Reflectance Factor | |
| Pulps - Preparation of laboratory sheets for physical testing | |
| Pulps - Sampling for Testing | |
| Pulps - Standard water for physical testing | |
| Pulps -- Laboratory wet disintegration -- Part 3: Disintegration of mechanical pulps at greater than 85 degree C | |
| Pulpwood and Pulp - Determination of Ash | |
| Pulpwood-Determinati on of Moisture Content for Analysis | |
| Quality Control Handbook | |
| Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations | |
| Quality Management - Customer Satisfaction - Guidelines for Complaints Handling in Organizations | |
| Quality management - Customer satisfaction - Guidelines for dispute resolution external to organizations | |
| Quality management - Guidelines to quality in project management | |
| Quality management system - Recycled plastic materials - Guidelines for the performance of business processes | |
| Quality Management Systems - Aerospace - Requirements | |
| Quality Management Systems - Guidelines for self-assessment | |
| Quality Management Systems - Guidelines for sustainable growth | |
| Quality management systems - Guidelines for the application of JIS Q 9001 | |
| Quality management systems \x97 Battery reuse \x97 Requirements | |
| Quality Management Systems- Fundamentals and Vocabulary | |
| Quality Management Systems- Guidelines for Performance Improvements | |
| Quality Management Systems- Requirements | |
| Quality management systems-Requirements (Amendment 1) | |
| Quality Systems - Medical Devices - Particular Requirements for the Application of JIS Z 9901 | |
| Quality Systems - Medical Devices - Particular Requirements for the Application of JIS Z 9902 | |
| Recycled pulps - Estimation of Stickies and Plastics - Image analysis method | |
| Recycled pulps - Estimation of Stickies and Plastics - Part 1: Visual method | |
| Recycled pulps - Estimation of visible contraries by instrumental means using reflected light | |
| Reference materials - Contents of certificates and labels | |
| Requirements for Compliance Program on Personal Information Protection | |
| Risk management - Principles and guidelines | |
| Risk management - Vocabulary | |
| Risk management-Risk assessment techniques | |
| Road Vehicles - Heavy Commercial Vehicle Combinations and Articulated Buses - Lateral Stability Test Methods | |
| Sampling and Preparation Method for Analysis of Pulpwood | |
| Security and resilience-Business continuity management systems-Requirements (Amendment 1) | |
| Security techniques -- Extension to JIS Q 27001 and JIS Q 27002 for privacy information management -- Requirements and guidelines | |
| Sizes of Continuous Business Forms | |
| Sizes of Paper | |
| Societal security - Business continuity management systems - Guidance | |
| Societal security - Emergency management - Requirements for incident response | |
| Societal security - Guidelines for exercises | |
| Societal security - Terminology | |
| Societal security-Business continuity management systems-Requirements | |
| Terms and Definitions Used in Connection with Reference Materials | |
| Terrestrial photovoltaic (PV) modules - Requirement for reliability assurance system (design, production and product warranty) | |
| Test Method for Determination of Crushing Strength of Iron Ore Pellets | |
| Test Method for Determination of Shatter Strength of Iron Ore Sinter | |
| Test Methods for Determination of Density of Iron Ores | |
| Test Methods for Determination of Reducibility of Iron Ores | |
| Testing Method for 1% Sodium Hydroxide Solubility of Pulpwood | |
| Testing Method for 75 Degree Specular Gloss of Paper and Paperboard | |
| Testing Method for Air Permeability of Paper and Paperboard | |
| Testing Method for Alcohol-Benzene Solubility of Pulpwood | |
| Testing Method for Cellulose in Wood for Pulp | |
| Testing Method for Cold- Water Solubility of Pulpwood | |
| Testing Method for Density of Pulpwood and Woodchips | |
| Testing Method for Diffuse Blue Reflectance Factor of Paper and Board | |
| Testing Method for Dirt in Paper and Paperboard | |
| Testing Method for Dissolving Pulp | |
| Testing Method for Ether Solubility of Wood for Pulp | |
| Testing Method for Fibre Composition of Paper | |
| Testing Method for Folding Endurance of Paper and Paperboard by Schopper Tester | |
| Testing Method for Grease Resistance of Paper | |
| Testing Method for Holocellulose in Pulpwood | |
| Testing Method for Hot- Water Solubility of Pulpwood | |
| Testing Method for Kappa Number of Pulp | |
| Testing Method for Lignin in Wood for Pulp | |
| Testing Method for Methoxyl Groups in Pulpwood | |
| Testing Method for Moisture in Papers and Paperboards | |
| Testing Method for Oil Absorptiveness of Paper and Paperboard | |
| Testing Method for Opacity of Paper | |
| Testing Method for Pentosan in Pulpwood | |
| Testing Method for Permanganate Number of Paper Pulp | |
| Testing Method for pH of Paper and Paperboard | |
| Testing Method for Ply Adhesion of Paperboard | |
| Testing Method for Puncture of Paperboard | |
| Testing Method for Refractoriness of Refractory Raw Materials | |
| Testing Method for Smoothness of Paper and Paperboard by Bekk Tester | |
| Testing Method for Stockigt Sizing Degree of Paper | |
| Testing Method for Strength of Paper Pulp | |
| Testing Method for Stretch of Paper and Paperboard | |
| Testing Method for Surface Strength of Paper and Paperboard | |
| Testing Method for Thickness and Bulk Density of Paper and Paperboard | |
| Testing Method for Water Absorption of Paper by Klemm's Method | |
| Testing Method for Water Absorptiveness of Paper and Paperboard (Cobb Test) | |
| Testing Method of Abrasion Resistance of Paperboard | |
| Testing Method of Repellency of Paper and Paperboard | |
| Testing Method of Tissue Paper for Nitrocellulose | |
| Testing Method of Wet Tensile Breaking Strength of Paper and Paperboard | |
| Testing methods for acid proof porcelain of chemical industry | |
| Testing Methods for Brightness by Hunter of Paper and Pulp | |
| Titanium ores - Method for determination of lead | |
| Titanium ores - Methods for determination of arsenic | |
| Titanium ores - Methods for determination of niobium | |
| Titanium ores - Methods for determination of phosphorus | |
| Titanium ores - Methods for determination of tin | |
| Toilet Tissue Papers | |
| Trimmed Sizes of Paper | |
| Uses of Certified Reference Materials | |
| Writing Papers |
| << Prev | Next >> |