Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
600
650
700
750
800
850
860
870
880
890
900
910
920
921
922
923
924
925
926
927
928
929
930
931
932
940
950
960
970
980
990
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| 4,4'-Diaminostilbene -2,2'-Disulfonic Acid | |
| 4,4'-Dihydroxy-7,7'- Ureylenedi-2-Naphtha lene Sulfonic Acid Disodium Salt (Carbonyl J-Acid Disodium Salt) | |
| 7-Anilino-4-Hydroxy- 2-Naphthalenesulfoni c Acid (Phenyl J-Acid) | |
| Abrasion Testing Methods of Vulcanized Rubber | |
| Accelerated Aging Test Methods for Vulcanized Rubber | |
| Acetoacetanilides (Acetoacetanilide 2'-Methylacetoacetan ilide 2',4'-Dimethylacetoa cetanilide.2'-Chloro acetoacetanilide) | |
| Acrylic Resin Enamel | |
| Acrylic Resin Varnish | |
| Adhesion Testing Methods for Vulcanized Rubber | |
| Adipic Acid | |
| Aluminium paint (Amendment 1) | |
| Aluminium Paint (Errata - June 1996) | |
| Aluminium pigments for paints (Amendment 1) | |
| Aluminium Pigments for Paints | |
| Aminoalkyd resin paint (Amendment 1) | |
| Aminoalkyd resin paint (Amendment 2) | |
| Aminoalkyd Resin Paint; (Errata-1994) | |
| Analytical Methods of Explosives | |
| Analytical Methods of Raw Natural Rubber | |
| Analytical methods of slurry explosives and emulsion explosives | |
| Anticorrosive Paint for General Use | |
| Anticorrosive paints for general use (Amendment 1) | |
| Antioxidants for Rubber | |
| Baking Enamel Film on Metal Substrate | |
| Basic Lead Chromate Anticorrosive Paint | |
| Black Powder | |
| Blasting caps and electric blasting caps (Amendment 1) | |
| Blasting caps and electric blasting caps | |
| Bleached Shellac | |
| Boiled Oil and Boiled Linseed Oil | |
| Calcium Carbonate for Rubber | |
| Calcium plumbate anticorrosive paint (Amendment 1) | |
| Calcium Plumbate Anticorrosive Paint | |
| Carbon black (pigment) | |
| Carbon black for rubber industry - Characteristics of pelletized carbon black - Part 1: Determination of fines content | |
| Carbon black for rubber industry - Characteristics of pelletized carbon black - Part 2: Determination of pellet size distribution | |
| Carbon black for rubber industry - Characteristics of pelletized carbon black - Part 2: Determination of pour density | |
| Carbon black for rubber industry - Characteristics of pelletized carbon black - Part 3: Determination of individual pellet crushing strength | |
| Carbon black for rubber industry - Fundamental characteristics - Part 1: Determination of iodine adsorption number (Titrimetric method) | |
| Carbon black for rubber industry - Fundamental characteristics - Part 2: Determination of specific surface area - Nitrogen adsorption methods - Single-point procedures | |
| Carbon black for rubber industry - Fundamental characteristics - Part 3: Determination of specific surface area - CTAB adsorption methods | |
| Carbon black for rubber industry - Fundamental characteristics - Part 4: Determination of oil absorption number (OAN) and oil absorption number of compressed sample (COAN) | |
| Carbon black for rubber industry - Fundamental characteristics - Part 5 : Determination of tinting strength | |
| Carbon black for rubber industry - Fundamental characteristics - Part 7: Rubber compounding ingredients - Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA) | |
| Carbon black for rubber industry - Fundamental characteristics - Part6: Determination of aggregate size distribution by disc centrifuge photosedimentometry | |
| Carbon black for rubber industry - General matters - Part 1: Carbon black shipment sampling procedures | |
| Carbon black for rubber industry - General matters - Part 2: Standard reference blacks | |
| Carbon black for rubber industry - Secondary characteristics - Part 1: Determination of loss on heating | |
| Carbon black for rubber industry - Secondary characteristics - Part 2: Determination of ash | |
| Carbon black for rubber industry - Secondary characteristics - Part 3: Determination of sieve residue | |
| Carbon Black for Rubber Industry - Secondary Characteristics - Part 4: Determination of light Transmittance of Toluene Extract | |
| Carbon black for rubber industrySecondary characteristics - Part 5: Determination of solvent extractable material | |
| Cashew Resin Paints | |
| Cashew Resin Undercoats | |
| Chlorinated Rubber Paints | |
| Chlorotoluenes (ortho-Chlorotoluene . para-Chlorotoluene) | |
| Chrome Yellow (Pigment) | |
| Classical V Belts for Power Transmission | |
| Colophonium | |
| Compounded Rubber for Retread and Repair | |
| Compounded stock for retread and repair (Amendment 1) | |
| Conveyor belts - Guidelines for storage and handling | |
| Conveyor belts-Longitudinal traction test-Measurement tensile strength of steel cord conveyor belts | |
| Conveyor belts-Methods for the determination of total thickness and cover thickness of steel cord conveyor belts | |
| Cyclohexanone | |
| Determination Of Reflectance Of Solar Radiation By Paint Film | |
| Detonating Fuses | |
| Dynamite | |
| Epoxy Resin Micaceous Iron Oxide Paint | |
| Epoxy Resin Paint | |
| Ester Gum | |
| Etching primer (Amendment 1) | |
| Etching Primer | |
| Extruded Rubber Tubes for Gas | |
| Fire-Retardant Paints for Buildings ; (Erratum) | |
| Flat Rubber Belts for Power Transmission | |
| Flex Cracking Test Methods for Vulcanized Rubber | |
| Fluorescent Paint for Safety Colour | |
| Fluoro Resin Paint for Architecture | |
| Fluoro Resin Paint for Steel Structures | |
| Gas welding equipment - Rubber hoses for welding, cutting and allied processes (Amendment 1) | |
| General Rules of Physical Testing Methods for Rubber, Vulcanized or Thermoplastic | |
| General Testing Method for Organic Rubber Chemicals | |
| Glossary of Explosive Terms | |
| Glossary of Paint Terms | |
| Glossary of Terms Used in Rubber Industry | |
| Glossy synthetic resin emulsion paint (Amendment 1) | |
| Hardness Testing Methods for Vulcanized Rubber | |
| High build type Zinc rich paint (Amendment 1) | |
| High Build Type Zinc Rich Paint | |
| High solar reflectant paint for roof | |
| Household paint for interior wall (Amendment 1) | |
| Household Paint for Interior Wall | |
| Household Paint for Wood and Metal | |
| Household Varnish for Interior Wooden Floor | |
| Inner Tubes for Bicycle Tyres (Amendment 1) | |
| Inner Tubes for Motorcycle Tires | |
| Interior floor coating (Amendment 1) | |
| Interior floor coating (Amendment 2) | |
| Interior floor coating | |
| Iron Blue (Pigment) | |
| Lacquer Sealer | |
| Lacquer Thinner | |
| Lacquer undercoat (Amendment 1) | |
| Lacquer Undercoat | |
| Lead cyanamide anticorrosive paint (Amendment 1) | |
| Lead Cyanamide Anticorrosive Paint | |
| Lead suboxide anticorrosive paint (Amendment 1) | |
| Lead Suboxide Anticorrosive Paint | |
| Lead-Free, Chromium-Free anticorrosive Paint | |
| Lead-free, Chromium-free anticorrosive paints (Amendment 1) | |
| Light conveyor belts - Determination of the maximum tensile strength | |
| Light conveyor belts - Tolerances on widths and lengths of cut light conveyor belts | |
| Liquefied Petroleum Gas Hoses | |
| Lithographic Inks - Part 1: Testing methods | |
| Lithographic Inks - Part 2: Colour and transparency of ink sets for four-colour-printing | |
| Lithopone (Pigment) | |
| Long durable paints for steel structures (Amendment 1) | |
| Low Temperature Testing Methods for Vulcanized Rubber | |
| Magnesium Oxide for Rubber | |
| Measurement method of exothermic decomposition energy for explosive estimation | |
| Method of Analysis for Rubber Goods | |
| Methods of Test for Pigments | |
| Mimeograph Ink | |
| Multicolor Paint | |
| Narrow V Belts for Power Transmission | |
| Nitrocellulose Lacquer | |
| Nitrophenols (ortho-Nitrophenol para-Nitrophenol) | |
| Non Aqueous Dispersion Acrylic Paint (Amendment 1) | |
| Non Aqueous Dispersion Acrylic Paint (Amendment 2) | |
| Non aqueous dispersion acrylic paint | |
| Oleoresinous Coatings for Outside Plating of Steel Ship | |
| Oleoresinous Undercoats | |
| Organic Vulcanization Accelerators for Rubber | |
| Organic Vulcanizing Agents for Rubber | |
| ortho-Nitroanisole | |
| Panels for Testing of Paints | |
| para-Chloro-ortho-ni troaniline | |
| para-Toluidine-meta- sulfonic acid (4-Aminotoluene-3-su lfonic acid) | |
| Pencil Scratch Tester for Coated Film | |
| Performance Testing Methods for Explosives Packaging | |
| Performance testing methods for flexible intermediate bulk containers of ammonium nitrate fuel oil explosives (Amendment 1) | |
| Performance testing methods for flexible intermediate bulk containers of ammonium nitrate fuel oil explosives | |
| Permanent Set Testing Methods for Vulcanized Rubber | |
| Permissible Detonator | |
| Phenolic Resin Type Micaceous Iron Oxide Paint | |
| Phosphorescent Pigments | |
| Phthalic Resin Enamel | |
| Phthalic Resin Varnish | |
| Physical Testing Methods for Unvulcanized Rubber | |
| Physical Testing Methods for Vulcanized Rubber; Errata - 5/1996 | |
| Ply Construction Conveyor Belts | |
| Pneumatic tyres for bicycles (Amendment 1) | |
| Pneumatic Tyres for Motorcycles | |
| Polyurethane Resin Paint for Architecture | |
| Polyurethane Resin Paint for Steel Structures | |
| Precipitated Barium Sulfate and Ground Barite (Pigment) | |
| Press Ink | |
| Qualitative Standard for Flame Resistance of Conveyor Belts | |
| Ready Mixed Paint (Synthetic Resin Type) | |
| Ready mixed paints (Synthetic resin type) (Amendment 1) | |
| Ready Mixed Paints | |
| Reagents for stability tests of explosives (Amendment 1) | |
| Reagents for Stability Tests of Explosives | |
| Reclaimed rubbers (Amendment 1) | |
| Reclaimed rubbers (Amendment 2) | |
| Reclaimed Rubbers | |
| Red Iron Oxide (Pigment) | |
| Red Lead (Pigment) | |
| Red-Lead Anticorrosive Paint | |
| Red-Lead Zinc Chromate Anticorrosive Paint | |
| Refined Rhus Lacquer | |
| Requirements for burglar-proofness of explosives | |
| Requirements for traveling chattel explosives magazine | |
| Retreaded tires (Amendment 1) | |
| Retreaded tires (Amendment 2) | |
| Retreaded Tires | |
| Rubber - Analysis by pyrolytic gas-chromatographic methods - Part 2: Determination of styrene, butadiene, isoprene ratio | |
| Rubber - Determination of Ash | |
| Rubber - Determination of Carbon Black Content - Pyrolytic and Chemical Degradation Methods | |
| Rubber - Determination of Free Sulfer | |
| Rubber - Determination of Solvent Extract | |
| Rubber - Determination of total sulfur content - Part 1: Oxygen combustion flask method | |
| Rubber - Determination of total sulfur content - Part 2: Sodium peroxide fusion method | |
| Rubber - Determination of total sulfur content - Part 3: Furnace combustion method | |
| Rubber - Determination of total sulfur content by ion chromatography | |
| Rubber - Identification - Infra-Red Spectrometric Method | |
| Rubber - Identification of antidegradants by gas chromatography/mass spectrometry | |
| Rubber - Identification of Polymers (Single Polymers and Blends) - Pyrolytic Gas Chromatographic Method | |
| Rubber - Tensile, flexural and compression test equipment (constant rate of traverse) - Specification | |
| Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 1: Introduction | |
| Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 2: Oscillating disc curemeter | |
| Rubber -- Measurement of vulcanization characteristics using curemeters -- Part 3: Rotorless curemeter | |
| Rubber and plastics - Analysis of multi-peak traces obtained in determinations of tear strength and adhesion strength | |
| Rubber and Rubber Products - Determination of the Composition of Vulcanizates and Uncured Compounds by Thermogravimetry - Part 1: Butadiene, Ethylene-Propylene Copolymer and Terpolymer, Isobutene-Isoprene, Isoprene and Styrene-Butadiene Rubbers | |
| Rubber and rubber products - Determination of the composition of vulcanizates and uncured compounds by thermogravimetry - Part 2: Acrylonitrile-butadi ene and halobutyl rubbers | |
| Rubber Coated Fabrics | |
| Rubber compounding ingredients - Organic chemicals - Part 4: Abbreviated terms | |
| Rubber compounding ingredients - Sulfur - Methods of test | |
| Rubber compounding ingredients - Test methods - Part 1: General | |
| Rubber compounding ingredients - Test methods - Part 2: Organic accelerators and vulcanizing agents | |
| Rubber compounding ingredients - Test methods - Part 3: Antidegradants | |
| Rubber compounding ingredients \x96\x96 Organic chemicals \x96\x96 Part 5: Test methods of organic peroxides | |
| Rubber Goods for Water Works (Amendment 1) | |
| Rubber goods for water works (Amendment 2) | |
| Rubber goods for water works (Amendment 3) | |
| Rubber goods for water works (Amendment 4) | |
| Rubber Goods for Water Works | |
| Rubber Hose Assemblies for Oil Suction and Discharge Services | |
| Rubber hose, textile-reinforced, for compressed air - Specification (Amendment 1) | |
| Rubber hoses and hose assemblies for steam - Specification (Amendment 1) | |
| Rubber Hoses for Brewing | |
| Rubber Hoses for Chemical Use | |
| Rubber Hoses for Compressed Air | |
| Rubber Hoses for Diving | |
| Rubber hoses for liquefied petroleum gases (LPG) - Part 2: Bulk transfer applications - Specification | |
| Rubber hoses for liquefied petroleum gases (LPGs) - Part 1: Automobile, General equipment and home application - Specification | |
| Rubber hoses for liquefied petroleum gases (LPGs) - Part 3: Dispensing hoses and hose assemblies - Specification | |
| Rubber Hoses for Oil Discharge | |
| Rubber Hoses for Steam | |
| Rubber Hoses for Water (Water Hoses) | |
| Rubber Hoses for Water Suction | |
| Rubber Hoses for Welding, Cutting and Allied Equipment | |
| Rubber hoses, textile-reinforced, for general-purpose water applications - Specification (Amendment 1) | |
| Rubber Inner Tubes for Bicycles | |
| Rubber Pneumatic Tires for Bicycles | |
| Rubber products - Determination of zinc contents - EDTA titrimetric method | |
| Rubber Test Mixes - Preparation, Mixing and Vulcanization - Equipment and Procedures | |
| Rubber threads (Amendment 1) | |
| Rubber Threads | |
| Rubber tubes for gas (Amendment 1) | |
| Rubber, raw - Determination of residual unsaturation in HNBR by iodine value | |
| Rubber, raw - Determination of the glass transition temperature by differential scanning calorimetry (DSC) | |
| Rubber, raw - Determination of volatile-matter content - Part 1: Hot mill method and oven method | |
| Rubber, raw - Determination of volatile-matter content - Part 2: Thermogravimetric method using automatic analyzer with infrared drying | |
| Rubber, raw natural and raw synthetic - Sampling and further preparative procedures | |
| Rubber, raw styrene-butadiene - Determination of soap and organic-acid content | |
| Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method | |
| Rubber, raw, S-SBR - Determination of the microstructure | |
| Rubber, unvulcanized - Physical property - Part 1: Determination of Mooney viscosity and pre-vulcanization characteristics with Mooney viscometer | |
| Rubber, unvulcanized - Physical property - Part 2: Determination of cure characteristics with oscillating curemeters | |
| Rubber, unvulcanized - Physical property - Part 4: Determination of blow point | |
| Rubber, unvulcanized - Physical testing methods - Part 3: Determination of plasticity and plasticity retention index (PRI) with rapid-plastimeter | |
| Rubber, unvulcanized -- Determination of viscosity and stress relaxation using a rotorless sealed rheometer | |
| Rubber, unvulcanized -- Physical property -- Part 4: Determination of blow point (Amendment 1) | |
| Rubber, Vulcanized - Determination of Density | |
| Rubber, Vulcanized - Preparation of Samples and Test Pieces - Chemical Tests | |
| Rubber, vulcanized -- Preparation of samples and test pieces -- Chemical tests (Amendment 1) | |
| Rubber, Vulcanized or Thermoplastic - Determination of Abrasion Resistance - Part 1: Guide | |
| Rubber, vulcanized or thermoplastic - Determination of abrasion resistance - Part 2: Testing methods | |
| Rubber, Vulcanized or Thermoplastic - Determination of Adhesion Test - Part 1: Adhesion to textile fabric | |
| Rubber, vulcanized or thermoplastic - Determination of adhesion test - Part 2: Adhesion to a rigid substrate - 90\xb0 peel method | |
| Rubber, Vulcanized or thermoplastic - Determination of adhesion test - Part 3: Adhesion to metal - Two-plate method | |
| Rubber, vulcanized or thermoplastic - Determination of hardness - Part 1: General guidance | |
| Rubber, vulcanized or thermoplastic - Determination of hardness - Part 2: IRHD method (hardness between 10 IRHD and 100 IRHD) | |
| Rubber, vulcanized or thermoplastic - Determination of hardness - Part 5: Calibration and verification of hardness testers | |
| Rubber, vulcanized or thermoplastic - Determination of low-temperature properties - Part 2: Low-temperature brittleness | |
| Rubber, vulcanized or thermoplastic - Determination of ozone resistance - Part 1: Static and dynamic strain testing | |
| Rubber, vulcanized or thermoplastic - Determination of ozone resistance - Part 2: Determination of the ozone concentration | |
| Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 1: Differential pressure method | |
| Rubber, vulcanized or thermoplastic - Determination of permeability to gases - Part 2: Equal pressure method | |
| Rubber, vulcanized or thermoplastic - Determination of resistance to weathering | |
| Rubber, vulcanized or thermoplastic - Determination of resistivity - Part 1: Guarded-electrode system | |
| Rubber, vulcanized or thermoplastic - Determination of resistivity - Part 2: Parallel terminal electrode system | |
| Rubber, vulcanized or thermoplastic - Determination of stain properties (Amendment 1) | |
| Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces | |
| Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 2: Small (Delft) test pieces | |
| Rubber, vulcanized or thermoplastic - Determination of tension set, elongation and creep | |
| Rubber, vulcanized or thermoplastic - Determination of the effect of liquids (Amendment 1) | |
| Rubber, vulcanized or thermoplastic - Determination of volume and surface resistivity | |
| Rubber, vulcanized or thermoplastic-Determ ination of hardness- Part 3: Durometer method | |
| Rubber, vulcanized or thermoplastic-Determ ination of hardness-Part 4: IRHD pocket meter method | |
| Rubber, vulcanized or thermoplastic-Determ ination of low-temperature properties- Part 3: Low temperature stiffening (Gehman test) | |
| Rubber, vulcanized or thermoplastic-Determ ination of low-temperature properties- Part 4: Low-temperature retraction (TR test) | |
| Rubber, vulcanized or thermoplastic-Determ ination of low-temperature propertiesPart 1: General introduction and guide | |
| Rubber, vulcanized or thermoplastics - Determination of tension fatigue - Constant strain method | |
| Safety Fuse | |
| Safety fuses for fireworks - Test methods | |
| Shellac Varnish and Bleached Shellac Varnish | |
| Shellac | |
| Shot Gun Powders | |
| Slurry Explosives and Emulsion Explosions | |
| Sodium 4-Amino-2- Chlorotoluene-5-Sulf onate (2B Acid (Sodium Salt)) | |
| Sporting Paper Caps | |
| Spray Hoses for Agricultural Use | |
| Steel Cord Conveyor Belts | |
| Stress Relaxation Testing Methods for Vulcanized Rubber | |
| Styrene-butadiene rubber(SBR) - Determination of the microstructure of solution-polymerized SBR - Part 1: 1H-NMR and IR with cast-film method | |
| Styrene-butadiene rubber(SBR) - Determination of the microstructure of solution-polymerized SBR - Part 2: FTIR with ATR method | |
| Sulfur Powder for Rubber | |
| Synchronous Belts for General Power Transmission | |
| Synchronous Belts for Light Duty Power Transmission | |
| Synthetic resin emulsion paint & Sealer (Amendment 1) | |
| Synthetic resin emulsion paint & Sealer (Amendment 2) | |
| Synthetic Resin Emulsion Paint, Glossy Type | |
| Synthetic Resin Emulsion Paints | |
| Synthetic Resin Putty | |
| Tar Epoxy Resin Paint | |
| Tear Testing Methods for Vulcanized Rubber | |
| Tensile testing methods for vulcanized rubber | |
| Test methods for pigments - Part 10: Heat stability using a stoving medium | |
| Test methods for pigments - Part 11: Density - Section 1: Pyknometer method | |
| Test methods for pigments - Part 11: Density - Section 2: Centrifugal degassing method | |
| Test methods for pigments - Part 12: Apparent density or apparent specific volume - Section 1: Loose packing method | |
| Test methods for pigments - Part 12: Apparent density or apparent specific volume - Section 2: Mechanically tamped packing method | |
| Test methods for pigments - Part 13: Oil absorption - Section 1: Refined linseed oil method | |
| Test methods for pigments - Part 13: Oil absorption - Section 2: Boiled linseed oil method | |
| Test methods for pigments - Part 14: Determination of residue on sieve - Section 1: Water method (Manual procedure) | |
| Test methods for pigments - Part 14: Determination of residue on sieve - Section 2: Water method - Mechanical flushing procedure | |
| Test methods for pigments - Part 15: Loss on heating - Section 1: Volatile matter at 105 degree C | |
| Test methods for pigments - Part 15: Loss on heating - Section 2: Ignition residue | |
| Test Methods for Pigments - Part 16: Matter Soluble in Water - Section 1: Hot Extraction Method | |
| Test methods for pigments - Part 16: Matter soluble in water - Section 2: Extraction at normal temperature | |
| Test methods for pigments - Part 17: pH value - Section 1: Hot extraction method | |
| Test methods for pigments - Part 17: pH value - Section 2: Extraction at normal temperature | |
| Test methods for pigments - Part 18: Resistivity of aquous extract | |
| Test methods for pigments - Part 1: Methods of dispersion for assessment of dispersion characteristics - Section 1: General rules | |
| Test methods for pigments - Part 1: Methods of dispersion for assessment of dispersion characteristics - Section 2: An oscillatory shaking machine | |
| Test methods for pigments - Part 1: Methods of dispersion for assessment of dispersion characteristics - Section 3: A high-speed impeller mill | |
| Test methods for pigments - Part 1: Methods of dispersion for assessment of dispersion characteristics - Section 4: A bead mill | |
| Test methods for pigments - Part 1: Methods of dispersion for assessment of dispersion characteristics - Section 5: A Hoover automatic muller | |
| Test methods for pigments - Part 1: Methods of dispersion for assessment of dispersion characteristics - Section 6: A triple-roll mill | |
| Test methods for pigments - Part 2: Comparison of colour - Section 1: Visual comparison method | |
| Test methods for pigments - Part 2: Comparison of colour - Section 2: Colorimetric method | |
| Test methods for pigments - Part 3: Tinting strength - Section 1: Determination of relative tinting strength and colour on reduction of coloured pigments - Visual comparison method | |
| Test methods for pigments - Part 3: Tinting strength - Section 2: Determination of relative tinting strength of white pigments - Visual comparison method | |
| Test methods for pigments - Part 3: Tinting strength - Section 3: Determination of relative tinting strength of coloured pigments and relative scattering power of white pigments - Photometric methods... | |
| Test methods for pigments - Part 4: Hiding power - Black and white paper chart method | |
| Test methods for pigments - Part 5: Methods of assessment of dispersion characteristics - Section 1: Assessment from the change in tinting strength of coloured pigments | |
| Test methods for pigments - Part 5: Methods of assessment of dispersion characteristics - Section 2: Assessment from the change in fineness of grind | |
| Test methods for pigments - Part 5: Methods of assessment of dispersion characteristics - Section 3: Assessment from the change in gloss | |
| Test methods for pigments - Part 6: Fluidity - Section 2: Rotational viscometer method | |
| Test methods for pigments - Part 6: Fluidty - Section 1: Spread-o-meter method | |
| Test methods for pigments - Part 7: Resistance to bleeding | |
| Test methods for pigments - Part 8: Resistance to chemicals | |
| Test methods for pigments - Part 9: Resistance to light | |
| Test Methods for the Hazard Classification of Explosives - Part 1: Test Series 5 | |
| Test Methods for the Hazard Classification of Explosives - Part 2: Test Series 6 | |
| Test Methods for the Hazard Classification of Explosives - Part 3: Test Series 7 | |
| Test Methods for the Hazard Classification of Explosives - Part 4: Test Series 8 | |
| Testing Method for Press Ink | |
| Testing Method of Antifouling Properties for Steel Ships' Bottom Paint | |
| Testing method of flammability using the oxygen index method for rubber, vulcanized or thermoplastic (Amendment 1) | |
| Testing method of flammability using the oxygen index method for rubber, vulcanized or thermoplastic | |
| Testing Methods for Lithographic and Letterpress Inks | |
| Testing methods for paint - Part 9: Coating powders - Section 1: Determination of gel time of thermosetting coating powders at a given temperature | |
| Testing Methods for Paint Components - Part 1: General Rule - Section 1: Common Test Conditions for Paint Components | |
| Testing Methods for Paint Components - Part 2: Component Analysis in Solvent Soluble Matter - Section 1: Acid Value (Titrimetric Method) | |
| Testing methods for paint components - Part 2: Component analysis in solvent soluble matter - Section 3: Boiling range | |
| Testing methods for paint components - Part 2: Component analysis in solvent soluble matter - Section 4: Alkyd resin | |
| Testing methods for paint components - Part 3: Component analysis in solvent insoluble matter - Section 1: Total leads (Flame atomic absorption spectrometric method) | |
| Testing methods for paint components - Part 4 : Analysis for components emitted from film - Section 2 : Volatile organic compounds | |
| Testing Methods for Paint Components - Part 4: Analysis for Components Emitted from Film - Section 1: Formaldehyde | |
| Testing methods for paint components - Part 5: Determination of volatile organic compound (VOC) content in paints - Section 1: Gas-chromatographic method | |
| Testing methods for paint components - Part 5: Determination of volatile organic compound (VOC) content in paints - Section 2: Water-based paints (Multiple standard addition method) | |
| Testing Methods for Paint Components- Part 1: General Rule- Section 1: Common Test Conditions for Paint Components | |
| Testing Methods for Paint Components- Part 1: General Rule- Section 2: Determination of Non-Volatile Matter | |
| Testing Methods for Paint Components- Part 2: Component Analysis in Solvent Soluble Matter- Section 1: Acid Value (Titrimetric Method) | |
| Testing Methods for Paint Components- Part 2: Component Analysis in Solvent Soluble Matter- Section 2: Softening Point (Ring and Ball Method) | |
| Testing Methods for Paint Components | |
| Testing Methods for Paints - Part 1: General Rule - Section 1: General Test Methods (Conditions and Methods) | |
| Testing Methods for Paints - Part 1: General Rule - Section 2: Sampling of Products | |
| Testing methods for paints - Part 1: General rule - Section 3: Examination and preparation of samples for testing | |
| Testing Methods for Paints - Part 1: General Rule - Section 4: Standard Panels for Testing | |
| Testing methods for paints - Part 1: General rule - Section 5: Coating of test panel (brush application) | |
| Testing methods for paints - Part 1: General rule - Section 6: Temperatures and humidities for conditioning and testing | |
| Testing Methods for Paints - Part 1: General Rule - Section 7: Determination of Film Thickness | |
| Testing Methods for Paints - Part 1: General Rule - Section 8: Reference Sample | |
| Testing Methods for Paints - Part 2: Characteristics and Stability of Paints - Section 1: Colour Number (Gardner Method) | |
| Testing Methods for Paints - Part 2: Characteristics and Stability of Paints - Section 2: Viscosity | |
| Testing Methods for Paints - Part 2: Characteristics and Stability of Paints - Section 3: Viscosity (Corn and Plate Methods) | |
| Testing Methods for Paints - Part 2: Characteristics and Stability of Paints - Section 4: Density | |
| Testing methods for paints - Part 2: Characteristics and stability of paints - Section 5: Fineness of grind | |
| Testing Methods for Paints - Part 2: Characteristics and Stability of Paints - Section 6:Pot Life | |
| Testing Methods for Paints - Part 2: Characteristics and Stability of Paints - Section 7: Storage Stability | |
| Testing methods for paints - Part 3: Film formability - Section 1: Assessment of natural spreading rate (Brush application) | |
| Testing Methods for Paints - Part 3: Film Formability - Section 2: Surface-Drying Test (Ballotini Method) | |
| Testing methods for paints - Part 3: Film formability - Section 3: Through-dry | |
| Testing Methods for Paints - Part 3: Film Formability - Section 4: Evaluation of the Compatibility of Product with a Surface to be Painted | |
| Testing methods for paints - Part 3: Film formability - Section 5: Pressure test for stackability | |
| Testing Methods for Paints - Part 3: Film Formability - Section 6: Print Free Test | |
| Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 1: Hiding Power (For Light-Coloured Paints) | |
| Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 2: Hiding Power (For Dark-Coloured Paints) | |
| Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 3: Visual Comparison of the Colour of Paints | |
| Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 4: Colorimetry (Principles) | |
| Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 5: Colorimetry (Measurement) | |
| Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 6: Colorimetry (Calculation of Colour Differences) | |
| Testing Methods for Paints - Part 4: Visual Characteristics of Film - Section 7: Specular Gloss | |
| Testing methods for paints - Part 5 : Mechanical property of film - Section 3 : Falling-weight test | |
| Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 10: Abrasion Resistance (Reciprocating Test Panel Method) | |
| Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 11: Washability | |
| Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 1: Bend Test (Cylindrical Mandrel) | |
| Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 2: Cupping Test | |
| Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 3: Falling-Weight Test | |
| Testing methods for paints - Part 5: Mechanical property of film - Section 4: Scratch hardness (Pencil method) | |
| Testing methods for paints - Part 5: Mechanical property of film - Section 5: Scratch hardness (Stylus method) | |
| Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 6: Adhesion Test (Cross-Cut Test) | |
| Testing methods for paints - Part 5: Mechanical property of film - Section 7: Adhesion test (Pull-off methods) | |
| Testing methods for paints - Part 5: Mechanical property of film - Section 8: Abrasion resistance (Rotating abrasive-paper-cover ed wheel method) | |
| Testing Methods for Paints - Part 5: Mechanical Property of Film - Section 9: Abrasion Resistance (Rotating Abrasive Rubber Wheel Method) | |
| Testing Methods for Paints - Part 6: Chemical Property of Film - Section 1: Resistance to Liquids (General Methods) | |
| Testing Methods for Paints - Part 6: Chemical Property of Film - Section 2: Resistance to Liquids (Water Immersion Method) | |
| Testing Methods for Paints - Part 6: Chemical Property of Film - Section 3: The Effect of Heat (Amendment 1) | |
| Testing Methods for Paints - Part 6: Chemical Property of Film - Section 3: The Effect of Heat | |
| Testing methods for paints - Part 7: Determination of resistance to cyclic corrosion conditions - Section 9: Salt fog/dry/humidity | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 1: Resistance to Neutral Spray | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 2: Resistance to Humidity (Continuous Condensation) | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 3: Resistance to Humidity (Intermittent Condensation) | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 4: Humidity and Cool-Heat Cycling Test | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 5: Light Fastness of Film | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 6: Natural Weathering Test | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 7: Accelerated Weathering (Exposure to Filtered Xenon-Arc Radiation) | |
| Testing Methods for Paints - Part 7: Long-Period Performance of Film - Section 8: Accelerated Weathering (Exposure to Fluorescent UV Lamps) | |
| Testing methods for paints - Part 8: Evaluation of degradation of paint coatings - Section 1: General principles and rating schemes | |
| Testing Methods for Paints - Part 8: Evaluation of Degradation of Paint Coatings - Section 2: Designation of Degree of Blistering | |
| Testing Methods for Paints - Part 8: Evaluation of Degradation of Paint Coatings - Section 3: Designation of Degree of Rusting | |
| Testing methods for paints - Part 8: Evaluation of degradation of paint coatings - Section 4: Designation of degree of cracking | |
| Testing methods for paints - Part 8: Evaluation of degradation of paint coatings - Section 5: Designation of degree of flaking | |
| Testing methods for paints - Part 8: Evaluation of degradation of paint coatings - Section 6: Rating of degree of chalking | |
| Testing methods for paints - Part 9: Coating powders - Section 2: Inclined-plane flow test | |
| Testing methods for paints - Part 9: Coating powders - Section 3: Particle size analysis by laser diffraction | |
| Testing Methods for Paints | |
| Testing Methods for Permissible Explosives and Permissible Detonator | |
| Testing Methods for Rebound Resilience Rubber, Vulcanized or Thermoplastic | |
| Testing Methods for Rubber and Plastics Hoses - Part 10: Determination of Tranmission of Liquids Through Hose Walls | |
| Testing Methods for Rubber and Plastics Hoses - Part 1: Methods of Measurement of Dimensions | |
| Testing Methods for Rubber and Plastics Hoses - Part 2: Hydrostatic Testing | |
| Testing Methods for Rubber and Plastics Hoses - Part 3: Determination of Suction Resistance | |
| Testing Methods for Rubber and Plastics Hoses - Part 4: Sub-Ambient Temperature Flexibility Tests | |
| Testing Methods for Rubber and Plastics Hoses - Part 5: Determination of Electrical Resistance | |
| Testing Methods for Rubber and Plastics Hoses - Part 6: Determination of Adhesion Between Components | |
| Testing Methods for Rubber and Plastics Hoses - Part 7: Assessment of Ozone Resistance Under Static Conditions | |
| Testing Methods for Rubber and Plastics Hoses - Part 8: Hydraulic-Pressure Impulse Test Without Flexing | |
| Testing Methods for Rubber and Plastics Hoses - Part 9: Bending Tests | |
| Testing methods for rubber and plastics hoses \x97 Part 11: Determination of abrasion resistance of the outer cover | |
| Testing methods for rubber and plastics hoses\x97Part 10: Determination of transmission of liquids through hose walls | |
| Testing Methods for Rubber Compounding Ingredients | |
| Testing Methods for Rubber Hoses | |
| Testing Methods for Uncured and Cured Silicone Rubber | |
| Testing Methods of Carbon Black for Rubber Industry | |
| Testing Methods of Explosives | |
| Testing Methods of Fundamental Characteristics of Carbon Black for Rubber Industry | |
| Testing Methods of Incidental Properties of Carbon Black for Rubber Industry | |
| Testing Methods of Nitrocellulose for Smokeless Powders | |
| Testing Methods of Properties of Pellets of Carbon Black for Rubber Industry | |
| Testing Methods of Resistance to Ozone Cracking for Vulcanized Rubber | |
| Testing Methods of Staining for Rubber, Vulcanized or Thermoplastic | |
| Testing Methods of Stress-Strain Properties at Low Deformation for Vulcanized Rubber | |
| Testing Methods of Temperature Rise and Fatigue in Flexometer for Rubber, Vulcanized or thermoplastic | |
| Testing Methods of the Effect of Liquids for Vulcanized Rubber | |
| Tetryl | |
| Textile Reinforced Thermoplastic Hoses for Hydraulic Use | |
| Textured paints (synthetic resin emulsion type) (Amendment 2) | |
| Textured paints (synthetic resin emulsion type)(Amendment 1) | |
| Textured Paints (Synthetic Resin Emulsion Type) | |
| Thermal performance of paint film - Determination of solar absorptance with a heat flow meter | |
| Thermoplastic and Thermosetting Powder Coating Films | |
| Titanium Dioxide (Pigment) | |
| Toy fireworks - Types and test methods | |
| Traffic paint (Amendment 1) | |
| Traffic Paint | |
| Trimethylene Trinitroamine | |
| Trinitrotoluene | |
| Turpentine Oils | |
| Ultramarine Blue (Pigment) | |
| Vinyl Chloride Resin Coatings for Outside Plating of Steel Ship | |
| Vinyl Chloride Resin Enamel | |
| Vinyl Chloride Resin Primer | |
| Vinyl Chloride Resin Varnish | |
| Vulcanized Particulate Rubber | |
| White Lead (Pigment) | |
| Wire reinforced rubber hoses and hose assemblies for gas (Amendment 1) | |
| Wire Reinforced Rubber Hoses for Gaseous Fuels | |
| Wire Reinforced Rubber Hoses for Hydraulic - Part 1: Rubber Hoses and Hose Assemblies - Wire-Reinforced Hydraulic Type - Specification | |
| Wire Reinforced Rubber Hoses for Hydraulic - Part 2: Rubber Hoses and Hose Assemblies - Rubber-Covered, Spiral Wire Reinforced, Hydraulic Type - Specification | |
| Wire Reinforced Rubber Hoses for Hydraulic - Part 3: Wire Reinforced Rubber Hoses | |
| Wire Reinforced Rubber Hoses for Hydraulic Use | |
| Zinc Chromate Anticorrosive Paint | |
| Zinc Oxide (Pigment) | |
| Zinc rich primer (Amendment 1) | |
| Zinc Rich Primer | |
| Zinc Yellow (Pigment) |
| << Prev | Next >> |