Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
600
650
700
750
800
850
870
880
890
900
910
920
922
923
924
925
926
927
928
929
930
931
932
933
934
940
950
960
970
980
990
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| (+)-Cinchonine Hydrochloride n-Hydrate | |
| 1,10-Phenanthroliniu m Chloride Monohydrate | |
| 1-Amino-2-naphthol-4 -sulfonic acid | |
| 1-Octanol | |
| 120-Size Photographic Films for General Use | |
| 135-Size Films and Magazines | |
| 135-Size Photographic Films for General Use | |
| 2,3-Indolinedione | |
| 2-Aminoethanol | |
| 4-Aminoantipyrine | |
| Acetaldehyde | |
| Acetamide | |
| Acetone for Pesticide Residue and Polychlorinated Biphenyl Analysis | |
| Acetone | |
| Acetonitrile for Pesticide Residue and Polychlorinated Biphenyl Analysis | |
| Acetonitrile | |
| Acetylacetone | |
| Agar | |
| Alizarin red S (Reagent) (Amendment 1) | |
| Alizarin Red S (Sodium Alizarinsulfonate) | |
| Alizarin Yellow GG (Salicyl Yellow) | |
| Alizarin Yellow R | |
| Allyl Alcohol | |
| Aluminium (III) chloride hexahydrate | |
| Aluminium (III) chloride | |
| Aluminium Ammonium Sulfate 12-Water | |
| Aluminium Potassium Sulfate 12-Water | |
| Aluminon | |
| Aluminum | |
| Ammonia Solution | |
| Ammonium Chloride | |
| Ammonium Citrate Dibasic | |
| Ammonium Peroxydisulfate | |
| Analytical Method for Determining Gases Evolved from Burning Plastics | |
| Aniline | |
| Anisole | |
| Anthrone | |
| Antimony | |
| Auramine | |
| Badge Films for Gamma and Hard X-Rays | |
| Badge Films for X-Rays | |
| Barium Chloride Dihydrate | |
| Benzoic Acid | |
| Benzoyl Chloride | |
| Benzyl Benzoate | |
| Black-And-White Photographic Sheet Papers for General Use | |
| Cadmium Chloride 2.5-Hydrate | |
| Calcium Chloride (for Drying) | |
| Calcium Chloride (for U-Tube) | |
| Calcium Chloride Dihydrate | |
| Calcium Chloride, Anhydrous | |
| Carbon fiber reinforced plastics - Testing methods for bearing strength - Part 2: Orthotropic and Quasi-isotropic long fiber laminates | |
| Carbon fiber reinforced plastics - Testing methods for in-plane shear properties-Part 2: Double V-notch shear method | |
| Casein (Milk) | |
| Catechol (Pyrocatechol) | |
| Cellular plastics - Determination of horizontal burning characteristics of small specimens subjected to a small flame | |
| Cellular plastics and rubbers - Determination of linear dimensions | |
| Cellular plastics, rigid - Determination of compressive creep under specified load and temperature conditions | |
| Cellular plastics, rigid - Determination of compressive creep | |
| Cellular rubber and plastics - Determination of dynamic cushioning performance | |
| Chloroauric Acid | |
| Chromium (III) chloride hexahydrate | |
| Citric Acid Monohydrate | |
| Cobalt (II) Chloride, Hexahydrate | |
| Copper (I) chloride (Reagent) (Amendment 1) | |
| Copper (I) chloride | |
| Copper (II) Chloride Dihydrate | |
| Cupferron | |
| D(+)-galactose | |
| Designation of Epoxide Resins | |
| Determination of Chlorine in Chlorine-Containing Polymers, Copolymers and Their Compounds | |
| Determination of epoxy equivalent in epoxy resins (Amendment 1) | |
| Determination of free acid in acid anhydride-based hardeners for epoxide resins | |
| Determination of Free Ammonia in Phenol-Formaldehyde Moldings | |
| Determination of Inorganic Chlorine in Epoxide Resins | |
| Determination of ISO Speed and ISO Average Gradient of Radiographic Film for Industrial Use | |
| Determination of ISO Speed and ISO Range of Black-And-White Photographic Papers for Continuous-Tone Reflection Print | |
| Determination of ISO Speed of Black-And-White Continuous-Tone Negative Films for Still Photography | |
| Determination of ISO Speed of Colour Negative Films for Still Photography | |
| Determination of ISO Speed of Colour Reversal Camera Films for Still Photography and Direct Projection Motion-Picture Photography | |
| Determination of Residual Chemicals in Processed Photographic Films and Papers | |
| Determination of Shear Modulus and Mechanical Damping of Plastics by Means of Torsion Pendulum | |
| Determination of the Curl of Photographic Film | |
| Determination of the Refractive Index of Plastics | |
| Diarsenic Trioxide | |
| Dibutyl Disulfide | |
| Dichloromethane (Reagent) (Amendment 1) | |
| Dichloromethane for Pesticide Residue Analysis | |
| Dichloromethane | |
| Diethyl Ether | |
| Diethylene glycol (Reagent) | |
| Dimensions for 16 mm Motion-Picture Raw Stock | |
| Dimensions for 35mm Motion-Picture Raw Stock | |
| Dimensions for 8 mm Motion-Picture Raw Stock Film, Type S | |
| Dimensions for Film in Sheets and Rolls for Micrographics Uses | |
| Dimensions for Photographic Film for Electronic Scanner Use | |
| Dimensions for Photographic Film in Sheets and Rolls for Medical, Industrial and Dental Radiography | |
| Dimensions for Photographic Paper in Rolls and Folds for Oscillograph | |
| Dimensions for Photographic Paper in Rolls for Telephoto Use | |
| Dimensions for Photographic Paper in Sheets and Rolls for Reprographic Use | |
| Dimensions for Photographic Sheet Films for General Use | |
| Dimensions of Cores for Motion-Picture Raw Stock and Magnetic Sound Recording Films | |
| Dimensions of Spools, Daylight Loading Type for 16 mm and 35 mm Motion-Picture Cameras | |
| Disodium Dihydrogen Ethylenediamine Tetraacetate Dihydrate | |
| Ethanol (95) | |
| Ethanol (99.5) (Ethyl Alcohol (99.5)) C2H5OH FW: 46.07 | |
| Ethanol (99.5) for Pesticide Residue and Polychlorinated Biphenyl Analysis | |
| Ethyl Acetate for Pesticide Residue Analysis | |
| Ethylene Glycol | |
| Ferric Chloride | |
| Formic Acid | |
| General Rule for Test Methods of Highly Purified Reagents | |
| General Rule for Test Methods of Reagents | |
| General Rules for Biochemical Reagents | |
| General Rules for Testing Fatigue of Rigid Plastics | |
| General Rules for Testing Impact Strength of Rigid Plastics by the Falling Weight Method | |
| General Rules for Testing Methods of Epoxide Resins and Hardeners | |
| General Rules for Tests for Thermal Ageing Properties of Thermoplastics in the Form of Sheet by Means of Ovens | |
| General Tolerancing Rules for Plastics Dimensions | |
| Glass Wool | |
| Hydrazinium Dichloride | |
| Hydrochloric Acid | |
| Hydrogen Hexachloroplatinate (IV) Hexahydrate | |
| Hydrogen Peroxide | |
| Hydroxylammonium Chloride | |
| Imaging materials - Processed photographic films, plates and papers - Filing enclosures and storage containers | |
| Imaging materials - Processed photographic plates - Storage practices (Amendment 1) | |
| Imaging materials - Processed photographic reflection prints - Storage practices (Amendment 1) | |
| Indigo Carmine (Sodium Indigotin Disulfonate) | |
| Iron (II) Chloride Tetrahydrate | |
| Isoamyl Alcohol, 3-Methylbutyl Alcohol | |
| L-Asparagine monohydrate (Reagent) (Amendment 1) | |
| L-Asparagine, Monohydrate | |
| Lead (II) chloride | |
| Lead (II) Oxide | |
| Light Source for Determining Fluorographic Sensitivity of Photographic Sensitive Materials Used with Green Fluorescent Screen | |
| Lithium Chloride | |
| Magnesium Chloride Hexahydrate | |
| Magnesium Perchlorate | |
| Manganese Chloride | |
| Mercury (II) Chloride | |
| Method for Determining Fluorographic Sensitivity of Photographic Sensitive Materials Used with Green Fluorescent Screen | |
| Method for Measuring Smoke Density and Concentration of Gases Evolved by Incineration or Decomposition of Plastics | |
| Method of Charpy Impact Test for Rigid Plastics | |
| Method of Izod Impact Test for Rigid Plastics | |
| Method of Rockwell Hardness Test for Plastics | |
| Methods for Comparison of Surface Roughness of Plastics | |
| Methods for Determining the Apparent Density of Rigid Cellular Plastics | |
| Methods for Determining the Density the Specific Gravity of Plastics | |
| Myo-Inositol | |
| N,n-Dimethyl-p-Pheny lene- Diammonium Dichloride (Dimethyl-p- Phenylenediamine Hydrochloride) | |
| N-1-Naphthylethylene diamine Dihydrochloride | |
| Nickel (II) Chloride Hexahydrate | |
| Non-Destructive Testing - Industrial Radiographic Film - Part 1: Classification of Film Systems for Industrial Radiography | |
| Orthoperiodic Acid | |
| Palladium (II) Chloride | |
| Perchloric Acid | |
| Phenylhydrazinium Chloride | |
| Phosphorus Acid | |
| Phosphoryl Chloride | |
| Photographic Grade 4-(N-Ethyl-N-2-Metha ne-sulfonylaminoethy l)- 2-Methylphenylenedia mine Sesquisulphate Monohydrate | |
| Photographic Sheet Films for General Use | |
| Photography - 110-size cartridges - Dimensions | |
| Photography - 110-Size Cartridges - Location and Dimensions of Film Exposure and Film Identification Notches | |
| Photography - Ammonia Processed Diazo Photographic Film - Specification for Stability | |
| Photography - Density Measurements - Part 1: Terms, Symbols and Notations | |
| Photography - Density Measurements - Part 2: Geometric Conditions for Transmission Density | |
| Photography - Density Measurements - Part 3: Spectral Conditions | |
| Photography - Density Measurements - Part 4: Geometric Conditions for Reflection Density | |
| Photography - Determination of ISO Safelight Conditions | |
| Photography - Direct Positive Colour Print Camera Materials - Determination of ISO Speed | |
| Photography - Direct-Exposing Medical and Dental Radiographic Film/Process Systems - Determination of ISO Speed and ISO Average Gradient | |
| Photography - Film Dimensions - Graphic Arts | |
| Photography - Film Dimensions - Rolls for Photocomposition | |
| Photography - Films and Papers - Determination of Dimensional Change | |
| Photography - Paper Dimensions - Pictorial Sheets (ISO 1008) | |
| Photography - Paper Dimensions - Rolls for Printers | |
| Photography - Paper Dimensions - Sheets and Rolls for Photocomposition (ISO 6408) | |
| Photography - Photographic Materials - Determination of ISO Resolving Power | |
| Photography - Processed Films - Method for Determining Lubrication | |
| Photography - Processed Photographic Paper Prints - Storage Practices | |
| Photography - Processed Photographic Plates - Storage Practices | |
| Photography - Processed Safety Photographic Film - Storage Practices | |
| Photography - Unprocessed Photographic Films and Papers - Storage Practices | |
| Photography -- Film dimensions -- 120 and 220 sizes | |
| Photography-110-Size Cartridges-Dimension s and Format of Film and Backing Paper | |
| Physical Testing Methods for Molded Products of Thermosetting Polyurethane Elastomers | |
| Plactics - Acquisition and presentation of comparable multipoint data - Part 3: Environmental influences on properties | |
| Plastics - Acquisition and presentation of comparable multipoint data - Part 1: Mechanical properties | |
| Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties | |
| Plastics - Acquisition and Presentation of Comparable Single Point Data | |
| Plastics - Acquisition and presentation of comparable single-point data - Part 1: Moulding materials | |
| Plastics - Acquisition and presentation of comparable single-point data - Part 2: Long-fibre-reinforce d plastics | |
| Plastics - Acquistion and Presentation of Comparable Multipoint Data Part 1: Mechanical Properties | |
| Plastics - Amine epoxide hardeners - Determination of primary, secondary and tertiary amine group nitrogen content | |
| Plastics - Aminoplastic moulding materials - Determination of volatile matter | |
| Plastics - Compression Moulding Test Specimens of Thermoplastic Materials (Amendment 1) | |
| Plastics - Compression Moulding Test Specimens of Thermoplastic Materials | |
| Plastics - Determination of apparent density of material that can be poured from a specified funnel | |
| Plastics - Determination of ash - Part 1: General methods | |
| Plastics - Determination of ash - Part 2: Poly (alkylene terephthalate) materials | |
| Plastics - Determination of ash - Part 4: Polyamides | |
| Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 1: General principles | |
| Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 2: Universal calibration method | |
| Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 3: Low-temperature method | |
| Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 4: High-temperature method | |
| Plastics - Determination of average molecular mass and molecular mass distribution of polymers using size-exclusion chromatography - Part 5: Method using light-scattering detection | |
| Plastics - Determination of burning behaviour by oxygen index - Part 1: Guidance | |
| Plastics - Determination of burning behaviour by oxygen index - Part 2: Ambient-temperature test | |
| Plastics - Determination of burning behaviour by oxygen index - Part 3: Elevated-temperature test | |
| Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source | |
| Plastics - Determination of changes in colour and variations in properties after exposure to daylight under glass, natural weathering or laboratory light sources | |
| Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test | |
| Plastics - Determination of Compressive Properties | |
| Plastics - Determination of dynamic mechanical properties - Part 10: Complex shear viscosity using a parallel-plate oscillatory rheometer | |
| Plastics - Determination of Dynamic Mechanical Properties - Part 1: General Principles | |
| Plastics - Determination of Dynamic Mechanical Properties - Part 2: Torsion-Pendulum Method | |
| Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method | |
| Plastics - Determination of dynamic mechanical properties - Part 4: Tensile vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties - Part 5: Flexural vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties - Part 6: Shear vibration - Non-resonance method | |
| Plastics - Determination of dynamic mechanical properties - Part 7: Torsional vibration - Non-resonance method | |
| Plastics - Determination of Flexural Properties | |
| Plastics - Determination of hardness - Part 2: Rockwell hardness | |
| Plastics - Determination of haze for transparent materials | |
| Plastics - Determination of image clarity | |
| Plastics - Determination of linear dimensions of test specimens | |
| Plastics - Determination of puncture impact behaviour of rigid plastics - Part 1: Non-instrumented impact testing | |
| Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented impact testing | |
| Plastics - Determination of scratch properties | |
| Plastics - Determination of Temperature of Deflection Under Load - Part 2: Plastics and Ebonite | |
| Plastics - Determination of Temperature of Deflection Under Load - Part 3: High-Strength Thermosetting Laminates and Long-Fibre-Reinforce d Plastics | |
| Plastics - Determination of Temperature of Deflection Under Load Part 1: General Test Method | |
| Plastics - Determination of Tensile Properties - Part 1: General Principles | |
| Plastics - Determination of Tensile Properties - Part 2: Test Conditions for Moulding and Extrusion Plastics | |
| Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fiber-reinforced plastic composites | |
| Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites | |
| Plastics - Determination of Tensile-Impact Strength | |
| Plastics - Determination of the effects of exposure to damp heat, water spray and sait mist | |
| Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method | |
| Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture | |
| Plastics - Determination of the Total Luminous Transmittance of Transparent Materials - Part 1: Single Beam Instrument | |
| Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 1: General principles | |
| Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 2: Poly (vinyl chloride) resins | |
| Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part 5: Thermoplastic polyester (TP) homopolymers and copolymers | |
| Plastics - Determination of Time-Temperature Limits After Prolonged Exposure to Heat | |
| Plastics - Determination of total luminous transmittance and reflectance | |
| Plastics - Determination of water content | |
| Plastics - Determination of yellowness index and change of yellowness index | |
| Plastics - Epoxy resins - Determination of 1,2-glycol content | |
| Plastics - Epoxy resins - Determination of chlorine content - Part 1: Inorganic chlorine | |
| Plastics - Epoxy resins - Determination of chlorine content - Part 2: Easily saponifiable chlorine | |
| Plastics - Epoxy resins - Determination of chlorine content - Part 3: Total Chlorine | |
| Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry | |
| Plastics - Epoxy resins - Part 2: Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy | |
| Plastics - Epoxy resins - Part 2: Preparation of test specimens and detremination of properties | |
| Plastics - Epoxy resins - Test methods | |
| Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content | |
| Plastics - Film and sheeting - Determination of dimensional change on heating | |
| Plastics - Film and sheeting - Determination of gas-transmission rate - Part 1: Differential-pressur e method | |
| Plastics - Film and sheeting - Determination of gas-transmission rate - Part 2: Equal-pressure method | |
| Plastics - Film and Sheeting - Determination of Tear Resistance - Part 1: Trouser Tear Method | |
| Plastics - Film and Sheeting - Determination of Tear Resistance - Part 2: Elmendorf Method | |
| Plastics - Film and Sheeting - Determination of Tear Resistance - Part 3: Right Angled Tear Method | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 1: Humidity detection sensor method | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 2: Infrared detection sensor method | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 3: Electrolytic detection sensor method | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 4: Gas-chromatographic detection sensor method | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 5: Pressure sensor method | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 6: Atmospheric pressure ionization mass spectrometer method | |
| Plastics - Film and sheeting - Determination of water vapour transmission rate - Part 7: Calcium corrosion method | |
| Plastics - Fire tests - Standard ignition sources | |
| Plastics - Guide to the acquisition and presentation of design data | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of pH of aqueous extract | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Part 1: Gas-chromatographic method | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Part 2: Gas-chromatographic analysis of dry powder | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride for general use - Determination of plasticizer absorption at room temperute | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 1: General principles, and moulding of multipurpose and bar test specimens | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 2: Small tensile bars | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 3: Small plates | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 4: Determination of moulding shrinkage | |
| Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy | |
| Plastics - Injection Moulding of Test Specimens of Thermoplastic Materials | |
| Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens | |
| Plastics - Injection moulding of test specimens of thermosetting powder moulding coumpounds (PMCs) - Part 2: Small plates | |
| Plastics - Instrumental determination of radiant exposure in weathering tests - General guidance and basic test method | |
| Plastics - Methods of Exposure to Laboratory Light Sources Part 1: General Guidance | |
| Plastics - Methods of Exposure to Laboratory Light Sources Part 2: Xenon-Arc Sources | |
| Plastics - Methods of Exposure to Laboratory Light Sources Part 3: Fluorescent UV Lamps | |
| Plastics - Methods of Exposure to Laboratory Light Sources Part 4: Open-Flame Carbon-Arc Lamps | |
| Plastics - Methods of exposure to solar radiation - Part 1: General guidance | |
| Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 1: Designation system and basis for... | |
| Plastics - Mixtures of polypropylene (PP) and polyethylene (PE) recyclate derived from PP and PE used for flexible and rigid consumer packaging - Part 2: Preparation of test specimens and... | |
| Plastics - Multipurpose Test Specimens | |
| Plastics - Phenol-formaldehyde mouldings - Determination of free phenols - Iodometric method | |
| Plastics - Plasticized poly(vinyl chloride)(PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Plasticized poly(vinyl chloride)(PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Poly (phenylene ether) (PPE) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Polyamides - Accelerated conditioning of test specimens | |
| Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate | |
| Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 1 : Designation system and basis for specifications | |
| Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Polyphenylene ether (PPE) moulding and extrusion materials - Part 1: Designation system and basis for specifications | |
| Plastics - Polyphenylene Sulfide (PPS) moulding and extrusion materials - Part 1: Designation systems and basis for specifications | |
| Plastics - Polyphenylene Sulfide (PPS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Polypropylene and propylene-copolymers - Determination of thermal oxidative stability in air - Oven method | |
| Plastics - Polytetrafluoroethyl ene (PTFE) semi-finished products - Part 1: Requirements and designation | |
| Plastics - Polytetrafluoroethyl ene (PTFE) semi-finished products - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Polyvinyl chloride homopolymer and copolymer resins - Determination of particle size by mechanical sieving | |
| Plastics - Polyvinyl chloride paste - Determination of apparent viscosity using the servers rheometer | |
| Plastics - Post-consumer poly (ethylene terephthalate) (PET) bottle recyclates - Part 1: Designation system and basis for specifications | |
| Plastics - Post-consumer poly(ethylene terephthalate) (PET) bottle recyclates - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Preparation of PVC pastes for test purposes - Dissolver method | |
| Plastics - Preparation of PVC pastes for test purposes - Planetary-mixer method | |
| Plastics - Preparation of test specimens by machining | |
| Plastics - PVC Resins - Determination of compacted apparent bulk density | |
| Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity by the Brookfield Test method | |
| Plastics - Smoke Generation - Part 2: Determination of Optical Density by a Single-Chamber Test | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 1: Designation system and basis for specifications | |
| Plastics - Thermoplastic polyester/ester and polyether/ester elastomers for moulding and extrusion - Part 2: Preparation of test specimens and determination of properties | |
| Plastics - Vertical flame spread determination for film and sheet | |
| Plastics - Vinyl chloride homopolymers and copolymers - Determination of chlorine content | |
| Plastics - Vinyl chloride-vinyl acetate copolymers - Determination of vinyl acetate | |
| Plastics -- Determination of abrasive wear by reciprocating linear sliding motion | |
| Plastics -- Determination of burning behaviour by oxygen index -- Part 4: High gas velocity test | |
| Plastics -- Determination of Charpy impact properties -- Part 2: Instrumented impact test | |
| Plastics -- Determination of scratch hardness of specialty films | |
| Plastics -- Methods for determining the density of non-cellular plastics -- Part 1: Immersion method, liquid pycnometer method and titration method | |
| Plastics -- Methods for determining the density of non-cellular plastics -- Part 2: Density gradient column method | |
| Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods | |
| Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 2: Instrumented puncture test | |
| Plastics-Determinati on of ignition temperature using a hot-air furnace | |
| Plastics-Determinati on of puncture impact behaviour of rigid plastics-Part 1: Non-instrumented impact testing | |
| Plastics-Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass | |
| Potassium Chlorate | |
| Potassium Chloride | |
| Potassium Dihydrogenphosphate for Oxidant Analysis | |
| Potassium Hexachloroplatinate | |
| Potassium Nitrite | |
| Potassium Perchlorate | |
| Potassium Periodate | |
| Potassium Permanganate | |
| Potassium peroxodisulfate (Amendment 1) | |
| Potassium Peroxodisulfate | |
| Preparation of Carbon Fibre Reinforced Plastic Panels for Test Purpose | |
| Quinoline | |
| Recommended Practice for Outdoor Exposure of Plastics | |
| Reference materials for volumetric analysis (Amendment 1) | |
| Reference Materials for Volumetric Analysis | |
| Rigid cellular plastics - Determination of dimensional stability | |
| Rigid cellular plastics - Determination of flexural properties - Part 1: Basic bending test | |
| Rigid cellular plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity | |
| Rigid cellular plastics - Determination of the volume percentage of open cells and of closed cells | |
| Rigid cellular plastics - Determination of water vapour transmission properties | |
| Safety Photographic Films | |
| Sea Sand (Sand, Washed) | |
| Selenious Acid | |
| Semicarbazide Hydrochloride | |
| Sensitive measurement method of peroxide in plastics by detecting ultra-weak photon emission | |
| Sensitometric Illuminants for Photography | |
| Sodium Arsenite | |
| Sodium Chlorate | |
| Sodium Chloride | |
| Sodium Formate | |
| Sodium Hydrogen Sulfite (Sodium Bisulfite) | |
| Sodium Nitrite | |
| Sodium Perchlorate | |
| Sodium periodate | |
| Sodium Peroborate | |
| Sodium Peroxide | |
| Sodium Selenite | |
| Sodium Sulfite (Reagent Chemicals) | |
| Sodium Sulfite, Anhydrous | |
| Standard Atmospheres for Conditioning and Testing of Plastics | |
| Standard Reference Test Specimens for Calibrating a Laboratory Light Exposure Apparatus | |
| Strontium chloride hexahydrate (Reagent) (Amendment 1) | |
| Strontium Chloride | |
| Sulfur | |
| Sulfurous Acid Solution | |
| Sulfuryl Chloride | |
| Test method for open-hole compressive strength of carbon fibre reinforced plastic | |
| Test method for open-hole tensile strength of carbon fibre reinforced plastics | |
| Test method for through-thickness tensile properties of carbon fibre reinforced plastics - Flexure method | |
| Test methods for adhesion of optical thin films on plastic substrate | |
| Test methods for vibration-damping property in damped composite beam of unconstrained type | |
| Testing Method for Abrasion Resistance of Plastics by Abrasive Wheels | |
| Testing Method for Abrasion Resistance of Plastics by Abrasive | |
| Testing Method for Apparent Interlaminar Shear Strength of Carbon Fiber Reinforced Plastics by Three Point Loading Method | |
| Testing Method for Apparent Interlaminar Shear Strength of Glass Fiber Reinforced Plastics | |
| Testing Method for Barcol Hardness of Glass Fiber Reinforced Plastics | |
| Testing Method for Brittleness Temperature of Plastics | |
| Testing Method for Charpy Impact Strength of Carbon Fiber Reinforced Plastics | |
| Testing Method for Charpy Impact Strength of Glass Fiber Reinforced Plastics | |
| Testing Method for Chemical Resistance of Fiber Reinforced Plastics | |
| Testing Method for Colour Fastness of Plastics Under Window Glass upon Exposure to Daylight | |
| Testing Method for Colour Fastness of Plastics upon Exposure to Light of the Carbon Arc | |
| Testing Method for Complete Reversed Plane Bending Fatigue of Carbon Fibre Reinforced Plastics | |
| Testing Method for Compression After Impact Properties of Carbon Fibre Reinforced Plastics | |
| Testing Method for Compressive Properties of Glass Fiber Reinforced Plastics | |
| Testing Method for Compressive Properties of Plastics | |
| Testing Method for Compressive Properties of Rigid Cellular Plastics | |
| Testing Method for Constant-Load Amplitude Tension - Tension Fatigue of Carbon Fibre Reinforced Plastics | |
| Testing Method for Dart Impact Resistance of Plastic Film and Sheeting | |
| Testing Method for Deflection Temperature of Rigid Plastics under Load | |
| Testing Method for Dynamic Mechanical Properties of Plastics by Non-Resonant, Forced, Fixed Frequency Oscillation | |
| Testing Method for Evaluation of the Resistance of Plastics to Chemical Substances | |
| Testing Method for Exposure to Natural Weathering of Carbon Fibre Reinforced Plastic | |
| Testing Method for Flammability of Polymeric Materials Using the Oxygen Index Method | |
| Testing Method for Flexural Creep of Plastics | |
| Testing Method for Flexural Properties of Glass Fiber Reinforced Plastics | |
| Testing Method for Flexural Properties of Rigid Cellular Plastics | |
| Testing Method for Flexural Properties of Rigid Plastics | |
| Testing Method for Flow Properties of Thermoplastics with a Capillary Rheometer | |
| Testing Method for Gas Transmission Rate Through Plastic Film and Sheeting | |
| Testing method for glass transition temperatures of carbon fibre reinforced plastics by thermal analysis | |
| Testing Method for Heat Sag of Plastics | |
| Testing Method for Impact Properties of Carbon Fibre Reinforced Plastics by Instrumented 3-Point Bending Impact Test | |
| Testing Method for In-Plane Shear Properties of Glass Fiber Reinforced Plastics | |
| Testing Method for interlaminar shear strength of carbon fibre reinforced plastic by double-notch specimen | |
| Testing method for linear thermal expansion coefficient of plastics by thermomechanical analysis (Amendment 1) | |
| Testing Method for Linear Thermal Expansion Coefficient of Plastics by Thermomechanical Analysis | |
| Testing Method for Melt Flow Rate of Thermoplastics | |
| Testing Method for Multiaxial Impact Behaviour of Carbon Fibre Reinforced Plastics | |
| Testing Method for Radiography of Carbon Fibre Reinforced Plastic Panels | |
| Testing Method for Resistivity of Conductive Plastics with a Four-Point Probe Array | |
| Testing method for softening temperature of thermoplastic film and sheeting by thermomechanical analysis (Amendment 1) | |
| Testing Method for Softening Temperature of Thermoplastics Film and Sheeting by Thermomechanical Analysis | |
| Testing Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting | |
| Testing Method for Stiffness of Plastics by Means of a Cantilever Beam | |
| Testing Method for Tensile Creep of Plastics | |
| Testing Method for Tensile Properties of Carbon Fiber Reinforced Plastics | |
| Testing Method for Tensile Properties of Plastic Films and Sheets | |
| Testing Method for Tensile Properties of Plastics | |
| Testing Method for Thermally Stimulated Current of Plastic Films | |
| Testing Method for Transverse Shear Strength of Glass Fiber Reinforced Plastics | |
| Testing Method for Ultrasonic Pulse Echo Technique of Carbon Fibre Reinforced Plastic Panels | |
| Testing Method for Vicat Softening Temperature of Thermoplastics | |
| Testing Method for Water Absorption Capacity of Super Absorbent Polymers | |
| Testing Method for Water Absorption Rate of Super Absorbent Polymers | |
| Testing Method of Flexural Fatigue of Rigid Plastics by Plane Bending | |
| Testing Method of Izod Impact Strength of Glass Fiber Reinforced Plastics | |
| Testing Methods for Bearing Strength of Carbon Fiber Reinforced Plastics | |
| Testing Methods for Carbon Fiber Content and Void Content of Carbon Fiber Reinforced Plastics | |
| Testing Methods for Chemical Resistance of Plastics Under Constant Tensile Deformation | |
| Testing Methods for Chemical Resistance of Plastics Under Constant Tensile Load | |
| Testing Methods for Compressive Properties of Carbon Fibre Reinforced Plastics | |
| Testing Methods for Durometer Hardness of Plastics | |
| Testing Methods for Epoxy Equivalent of Epoxide Resins | |
| Testing Methods for Evaluating the Effect on Photographic Image Stability of the Enclosure Materials to be Used for Storing Processed Films and Papers | |
| Testing Methods for Flexural Creep of Carbon Fibre Reinforced Plastics | |
| Testing Methods for Flexural Properties of Carbon Fiber Reinforced Plastics | |
| Testing methods for heat of transitions of plastics (Amendment 1) | |
| Testing Methods for Heat of Transitions of Plastics | |
| Testing Methods for In-Plane Shear Properties of Carbon Fiber Reinforced Plastics by Plus or Minus 45 Degrees Tension Method and Two Pairs of Rails Method | |
| Testing Methods for Interlaminar Fracture Toughness of Carbon Fibre Reinforced Plastics | |
| Testing Methods for Non-Volatile Matter in Solvent-Diluted Epoxide Resins | |
| Testing Methods for Optical Properties of Plastics | |
| Testing Methods for Photographic Grade Chemicals | |
| Testing Methods for Prepreg, Carbon Fiber and Epoxy Resins | |
| Testing Methods for Shear Strength of Plastics by Punch Tool | |
| Testing Methods for Sliding Wear Resistance of Plastics | |
| Testing Methods for Softening Point of Epoxide Resins | |
| Testing Methods for Specific Gravity of Epoxide Resins and Hardeners | |
| Testing methods for specific heat capacity of plastics (Amendment 1) | |
| Testing Methods for Specific Heat Capacity of Plastics | |
| Testing Methods for Tear Resistance of Plastic Film and Sheeting | |
| Testing Methods for Tensile Creep of Carbon Fibre Reinforced Plastics | |
| Testing Methods for Thermoplastic Polyurethane Elastomers | |
| Testing Methods for Thickness of Plastic Film and Sheeting | |
| Testing Methods for Tolylene Diisocyanate Type Prepolymers for Thermosetting Urethane Elastomers | |
| Testing Methods for Total Amine Values of Amine- Based Hardeners of Epoxide Resins | |
| Testing methods for transition temperatures of plastics (Amendment 1) | |
| Testing Methods for Transition Temperatures of Plastics | |
| Testing Methods for Viscosity of Epoxide Resins and Hardeners | |
| Testing Methods for Viscosity with a Rotational Viscometer of Resins in the Liquid Form | |
| Testing Methods for Water and Boiling Water Absorption of Plastics | |
| Testing Methods for Water Vapor Transmission Rate of Plastic Film and Sheeting (Instrument Method) | |
| Testing Methods for Yellowness Index and Change of Yellowness Index of Plastics | |
| Testing Methods of Plastics by Thermogravimetry | |
| Testing Methodsa for Reclaimed Poly(Ethylene Terephthalate) (PET) Moulding Materials from PET Bottle | |
| Tin (II) chloride dihydrate | |
| Tin (IV) Chloride Pentahydrate | |
| Triphenyltetrazolium Chloride | |
| Trisodium Citrate Dihydrate | |
| Unidirectional carbon fiber reinforced polymer strips | |
| Waste plastics - Test method for total bromine contents | |
| Xylene Cyanol FF | |
| Xylene | |
| Zinc Chloride | |
| Zinc Powder Zn AW:65.39 | |
| Zinc |
| << Prev | Next >> |