Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
27
28
29
30
31
32
33
34
35
36
37
38
39
40
50
60
70
80
90
100
150
200
250
300
350
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| \xc9missions de sources fixes - D\xe9termination de la concentration massique de protoxyde d'azote (N2O) - M\xe9thode de r\xe9f\xe9rence: M\xe9thode infrarouge non dispersive | |
| \xc9nergie nucl\xe9aire - Technologie du combustible nucl\xe9aire - M\xe9thode des ratios pour d\xe9terminer la radioactivit\xe9 des colis de d\xe9chets de faible et moyenne activit\xe9 produits par les centrales nucl\xe9aires | |
| \xc9quipement d'entra\xeenement fixe - Partie 9: Appareils d'entra\xeenement elliptiques, exigences sp\xe9cifiques de s\xe9curit\xe9 et m\xe9thodes d'essai suppl\xe9mentaires AMENDEMENT 1 | |
| A Comparison of an Analytical and FEA Approach in Determining Thermal Lead Correction for High Speed Gears | |
| A New Approach for the Calculation of Worm Shaft Deflection in Worm and Crossed Helical Gear Drives | |
| Adh\xe9sifs \xe9lastiques \x97 Essai des assemblages coll\xe9s \x97 Essai de pelage sur cordon | |
| Adventure tourism \x97 Leaders \x97 Personnel competence | |
| Adventure tourism \x97 Safety management systems \x97 Requirements AMENDMENT 1: Climate action changes | |
| Aggregate Suspension Mixture Proportioning Method | |
| Air cargo unit load devices - Performance requirements and test parameters | |
| Amendements min\xe9raux basiques - D\xe9termination de la distribution granulom\xe9trique par tamisage \xe0 sec ou \xe0 l'\xe9tat humide | |
| Amendements min\xe9raux basiques \x97 D\xe9termination de la valeur neutralisante \x97 M\xe9thodes par titrim\xe9trie | |
| Analyse chimique des mat\xe9riaux r\xe9fractaires contenant de l'alumine, de la zircone et de la silice - Mat\xe9riaux r\xe9fractaires contenant de 5 % \xe0 45 % de ZrO2 (m\xe9thode alternative \xe0... | |
| Analyse chimique des mat\xe9riaux r\xe9fractaires contenant de l'alumine, de la zircone et de la silice \x97 Mat\xe9riaux r\xe9fractaires contenant de 5 % \xe0 45 % de ZrO2 (m\xe9thode alternative \xe0... | |
| Analyse chimique des mati\xe8res premi\xe8res et des produits r\xe9fractaires contenant du carbure de silicium - Partie 2: D\xe9termination de la perte au feu, du carbone total, du carbone libre et... | |
| Analyse chimique des mati\xe8res premi\xe8res et des produits r\xe9fractaires contenant du carbure de silicium - Partie 3: Dosage de l'azote, de l'oxyg\xe8ne et des constituants m\xe9talliques et oxyd\xe9s | |
| Analyse chimique des mati\xe8res premi\xe8res et des produits r\xe9fractaires contenant du carbure de silicium \x97 Partie 1: Informations g\xe9n\xe9rales et pr\xe9paration des \xe9chantillons | |
| Analyse des gaz \x97 M\xe9thodes analytiques pour carburant hydrog\xe8ne \x97 Applications utilisant des piles \xe0 combustible \xe0 membrane \xe9changeuse de protons (MEP) pour v\xe9hicules routiers | |
| Analysis of the Operational Behavior of a High-Speed Planetary Gear Stage for Electric Heavy-Duty Trucks in Multi-Body Simulation | |
| Anodisation de l'aluminium et de ses alliages - D\xe9termination de l'\xe9paisseur des couches anodiques - M\xe9thode non destructive par microscope \xe0 coupe optique | |
| Anodisation de l'aluminium et de ses alliages - D\xe9termination de la masse par unit\xe9 de surface (masse surfacique) des couches anodiques - M\xe9thode gravim\xe9trique | |
| Applications ferroviaires \x97 M\xe9thode de calcul de recyclabilit\xe9 et valorisabilit\xe9 pour mat\xe9riel roulant | |
| Artichokes \x97 Specification and test methods | |
| Asparagus \x97 Specification and test methods | |
| Automated People Mover Standards - Part 1 | |
| Automated People Mover Standards - Part 3: Electrical Stations Guideways | |
| Automated People Mover Standards | |
| Automated People Mover Standards\x97Part 2 | |
| Bouchons en li\xe8ge - Dosage des r\xe9sidus oxydants - M\xe9thode par titrage iodom\xe9trique | |
| Bouteilles \xe0 gaz - F\xfbts soud\xe9s de capacit\xe9 inf\xe9rieure ou \xe9gale \xe0 3 000 litres destin\xe9s au transport des gaz - Partie 1: Capacit\xe9 jusqu'\xe0 1 000 litres AMENDEMENT 1... | |
| Bouteilles \xe0 gaz - F\xfbts soud\xe9s de capacit\xe9 inf\xe9rieure ou \xe9gale \xe0 3 000 litres destin\xe9s au transport des gaz - Partie 1: Capacit\xe9 jusqu'\xe0 1 000 litres | |
| Bouteilles \xe0 gaz - Identification et marquage \xe0 l'aide de la technologie d'identification par radiofr\xe9quences - Partie 2: Sch\xe9mas de num\xe9rotage pour identification par radiofr\xe9quences | |
| BS EN 14509-4 Factory-made double skin metal faced insulating sandwich panels. Part 4: Test methods for fixing of panels to substructure and for determining restraining effect on substructure | |
| Building and civil engineering sealants \x97 Assessment of the fungal growth on sealant surfaces | |
| Case Study of ISO/TS 6336-22 Micropitting Calculation | |
| Cavi per energia | |
| Centrifugal Separators and Clarifiers | |
| Certified Ratings Program - Product Rating Manual for Fan Air Performance | |
| Charges dues \xe0 l\x92exploitation dans les b\xe2timents d\x92habitation et publics | |
| Chemical Admixtures for Concrete | |
| Chemical analysis of raw materials and refractory products containing silicon-carbide, silicon-nitride, silicon-oxynitride and sialon \x97 Part 4: XRD methods | |
| Chemicals for the leather tanning industry \x97 Determination of the total content of certain bisphenols | |
| Chlore liquide \xe0 usage industriel - D\xe9termination du titre volum\xe9trique en chlore du produit gaz\xe9ifi\xe9 | |
| Chlore liquide \xe0 usage industriel - Dosage de l\x92eau - M\xe9thode gravim\xe9trique | |
| Cigarettes - Dosage de carbonyles s\xe9lectionn\xe9s dans le courant principal de la fum\xe9e de cigarette - M\xe9thode par chromatographie liquide haute performance | |
| Co\xfbt du cycle de vie et recyclage des tuyaux en fonte ductile pour l'eau | |
| Compatibilit\xe0 elettromagnetica | |
| Compendium of Case Histories on Repair of Erosion-Damaged Concrete in Hydraulic Structures | |
| Construction and installation of ductile iron pipeline system | |
| Construction et configuration des p\xe9dales des chariots de manutention automoteurs \xe0 conducteurs assis - R\xe8gles de construction et de configuration des p\xe9dales | |
| Construction navale - Navigation intkrieure - Barbotins pour les chahes d'ancre ktanconnkes | |
| Cornelian cherry \x97 Specification and test methods | |
| Corps gras d\x92origines animale et v\xe9g\xe9tale - D\xe9termination des \xe9l\xe9ments traces dans les corps gras par spectrom\xe9trie d\x92\xe9mission optique \xe0 plasma induit par haute fr\xe9quence (ICP-OES) | |
| Corrosion des m\xe9taux et alliages - Mesurage de la vitesse de propagation des petites fissures assist\xe9e par l'environnement | |
| Corrosion of metals and alloys \x97 Determination of the corrosion rates of embedded steel reinforcement in concrete exposed to simulated marine environments | |
| Cosm\xe9tiques - Microbiologie - D\xe9nombrement et d\xe9tection des bact\xe9ries a\xe9robies m\xe9sophiles | |
| Cosm\xe9tiques - Microbiologie - D\xe9tection d'Escherichia coli | |
| Cosm\xe9tiques - Microbiologie - Instructions g\xe9n\xe9rales pour les examens microbiologiques RECTIFICATIF TECHNIQUE 1 | |
| Cosm\xe9tiques - Microbiologie - Instructions g\xe9n\xe9rales pour les examens microbiologiques | |
| Cosmetics \x97 Microbiology \x97 Detection of Escherichia coli AMENDMENT 1 | |
| Cosmetics \x97 Microbiology \x97 Enumeration and detection of aerobic mesophilic bacteria AMENDMENT 1 | |
| Courroies transporteuses l\xe9g\xe8res - D\xe9termination de la r\xe9sistance maximale \xe0 la traction | |
| Courroies transporteuses l\xe9g\xe8res - D\xe9termination des r\xe9sistances \xe9lectriques | |
| Courroies transporteuses l\xe9g\xe8res - D\xe9termination du champ \xe9lectrostatique engendr\xe9 par une courroie transporteuse l\xe9g\xe8re en marche | |
| Courroies transporteuses l\xe9g\xe8res - D\xe9termination du coefficient de frottement | |
| Courroies transporteuses l\xe9g\xe8res - D\xe9termination du module d\x92\xe9lasticit\xe 9 relax\xe9 | |
| Courroies transporteuses l\xe9g\xe8res - Partie 1: Caract\xe9ristiques et applications principales | |
| Courroies transporteuses l\xe9g\xe8res - Partie 2: Liste des termes \xe9quivalents | |
| Criminalistique - Partie 1: Termes et d\xe9finitions | |
| Criminalistique - Partie 2: Reconnaissance, enregistrement, collecte, transport et stockage des traces et autres \xe9l\xe9ments d'int\xe9r\xeat | |
| Cryogenic vessels - Pilot operated pressure relief devices - Part 4: Pressure-relief accessories for cryogenic service AMENDMENT 1 | |
| Cryogenic vessels - Pilot operated pressure-relief devices - Part 4: Pressure-relief accessories for cryogenic service | |
| Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 2: Non-reclosable pressure-relief devices AMENDMENT 1 | |
| Cryogenic vessels - Pressure-relief accessories for cryogenic service - Part 2: Non-reclosable pressure-relief devices | |
| Cryogenic vessels - Static vacuum-insulated vessels - Part 1: Design, fabrication, inspection and tests | |
| Cryogenic vessels \x97 Cryogenic insulation performance AMENDMENT 1 | |
| Cryogenic vessels \x97 Pressure-relief accessories for cryogenic service \x97 Part 1: Reclosable pressure-relief valves AMENDMENT 1 | |
| Cryogenic vessels \x97 Pressure-relief accessories for cryogenic service \x97 Part 1: Reclosable pressure-relief valves | |
| Cryogenic vessels \x97 Transportable vacuum insulated vessels of not more than 1 000 litres volume \x97 Part 1: Design, fabrication, inspection and tests AMENDMENT 1 | |
| Cryogenic vessels \x97 Transportable vacuum insulated vessels of not more than 1 000 litres volume \x97 Part 1: Design, fabrication, inspection and tests | |
| Cryogenic vessels \x97 Valves for cryogenic service | |
| Cryogenic vessels Cryogenic insulation performance | |
| Cryogenic vessels Gas/materials compatibility | |
| Cylindrical Wormgearing Tolerance and Inspection Methods (Metric) | |
| Dosage de l'oxyde de bore(III) dans les produits r\xe9fractaires - Partie 1: D\xe9termination de l'oxyde de bore(III) total dans les mat\xe9riaux oxydants pour les c\xe9ramiques, les verres et les \xe9maux... | |
| Dosage de l'oxyde de bore(III) dans les produits r\xe9fractaires - Partie 2: M\xe9thode d'extraction acide pour le dosage de l'oxyde de bore(III) dans les composants de liant | |
| Draft BS EN 1009-6 Machines for mechanical processing of minerals and similar solid materials - Safety. Part 6: Specific requirements for mobile machinery | |
| Draft BS EN 1092-3 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated. Part 3: Copper alloy flanges | |
| Draft BS EN 12004-3 Adhesives for ceramic tiles. Part 3: Terminology, specifications, designation and marking | |
| Draft BS EN 12272-1 Surface dressing - Test methods. Part 1: Rate of spread and accuracy of spread of binder and chippings | |
| Draft BS EN 12272-3 Surface dressing - Test methods - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method | |
| Draft BS EN 12326-3 Slate and stone for discontinuous roofing and external cladding Part 3: Specifications for schist and schistose stones | |
| Draft BS EN 12477 Protective gloves for welders | |
| Draft BS EN 12845-1 Fixed firefighting systems - Automatic sprinkler systems. Part 1: Design, installation and maintenance | |
| Draft BS EN 13001-3-8 Cranes - General design. Part 3-8: Limit states and proof competence of machinery - Shafts. | |
| Draft BS EN 13055 Lightweight aggregates | |
| Draft BS EN 13288 Food processing machinery - Bowl lifting and tilting machines - Safety and hygiene requirements | |
| Draft BS EN 13383-1 Armourstone. Part 1: Characteristics | |
| Draft BS EN 13383-2 Armourstone. Part 2: Complementary information and test methods | |
| Draft BS EN 13450-1 Aggregates for railway ballast. Part 1: Characteristics | |
| Draft BS EN 13450-2 Aggregates for railway ballast. Part 2: Complementary information | |
| Draft BS EN 13631-7 Explosives for civil uses - Explosives. Part 7: Determination of safety and reliability at extreme temperatures | |
| Draft BS EN 13794 Respiratory protective devices - Self-contained closed-circuit breathing apparatus for escape - Requirements, testing and marking | |
| Draft BS EN 13857-3 Explosives for civil uses. Part 3: Information to be provided by the manufacturer or his authorised representative to the user | |
| Draft BS EN 13938-7 Explosives for civil uses - Propellants and rocket propellants. Part 7: Determination of safe and reliable ignition and complete deflagration of black powder | |
| Draft BS EN 14161 Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2017, modified) | |
| Draft BS EN 14163 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2013, modified) | |
| Draft BS EN 14336 Heating systems in buildings - Installation and commissioning of water based heating systems | |
| Draft BS EN 14388 Road traffic noise reducing devices - Characteristics | |
| Draft BS EN 14509-1 Factory-made double skin metal faced insulating sandwich panels. Part 1: Self-supporting applications | |
| Draft BS EN 14509-2 Double skin metal faced insulating panels - Factory made products - Specifications. Part 2: Structural applications - Fixings and potential uses of stabilization of individual structural... | |
| Draft BS EN 14509-3 Factory-made double skin metal faced insulating sandwich panels. Part 3: Test methods for determining mechanical strength, building physical behaviour and durability | |
| Draft BS EN 14509-5 Factory-made double skin metal faced insulating sandwich panels - Part 5: Design methods - Determination criteria for combining actions and spans | |
| Draft BS EN 1463-3 Road marking materials. Part 3: Active road studs: performance requirements | |
| Draft BS EN 15129-6 Anti-seismic devices. Part 6: Sliding isolators | |
| Draft BS EN 15542 Ductile iron pipes, fittings and accessories - External cement mortar coating for pipes - Requirements and test methods | |
| Draft BS EN 15761 Pre-shaped growing media - Determination of the dimensions measured and bulk density | |
| Draft BS EN 15978-1 Sustainability of construction works - Methodology for the assessment of performance of buildings. Part 1: Environmental Performance | |
| Draft BS EN 16261-1 Pyrotechnic articles - Fireworks, category F4. Part 1: Terminology | |
| Draft BS EN 16261-2 Pyrotechnic articles - Fireworks, Category F4. Part 2: Requirements | |
| Draft BS EN 16261-3 Pyrotechnic articles - Fireworks, Category F4. Part 3: Test methods | |
| Draft BS EN 16261-4 Pyrotechnic articles - Fireworks, Category F4. Part 4: Minimum labelling requirements and instructions for use | |
| Draft BS EN 16263-1 Pyrotechnic articles - Other pyrotechnic articles. Part 1: Terminology | |
| Draft BS EN 16263-2 Pyrotechnic articles - Other pyrotechnic articles. Part 2: Requirements | |
| Draft BS EN 16263-3 Pyrotechnic articles - Other pyrotechnic articles. Part 3: Categories and types | |
| Draft BS EN 16263-4 Pyrotechnic articles - Other pyrotechnic articles. Part 4: Test methods | |
| Draft BS EN 16263-5 Pyrotechnic articles - Other pyrotechnic articles. Part 5: Minimum labelling requirements and instructions for use | |
| Draft BS EN 16265 Pyrotechnic articles - Other pyrotechnic articles - Ignition devices | |
| Draft BS EN 16905-2 Gas-fired endothermic engine driven heat pumps. Part 2: Safety | |
| Draft BS EN 17140 Thermal insulation products for buildings - Factory-made vacuum insulation panels (VIP) - Specification | |
| Draft BS EN 17436 Cabin air quality on civil aircraft - Chemical compounds | |
| Draft BS EN 17555-1 Aggregates for construction works. Part 1: Characteristics | |
| Draft BS EN 17555-2 Aggregates for construction works. Part 2: Complementary information | |
| Draft BS EN 1759-3 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated. Part 3: Copper alloy flanges | |
| Draft BS EN 1759-4 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated. Part 4: Aluminium alloy flanges | |
| Draft BS EN 17632 Building Information Modelling (BIM) - Semantic Modelling and Linking (SML) | |
| Draft BS EN 17643 Bitumen and bituminous binders - Determination of equi-shear modulus temperature using a Dynamic Shear Rheometer (DSR) - BTSV test | |
| Draft BS EN 17657 Equipments for slaughterhouses - Slaughtering traps for bovine animals - Safety and hygiene requirements | |
| Draft BS EN 17662 Execution of steel structures and aluminium structures - Environmental Product Declarations - Product category rules complementary to EN 15804 for Steel, Iron and Aluminium structural products... | |
| Draft BS EN 17670-1 Plastics piping systems for non-pressure underground conveyance and storage of non-potable water - Manholes, inspection chambers and road gullies for storm water systems made of unplasticized... | |
| Draft BS EN 1790 Road marking materials - Preformed road markings | |
| Draft BS EN 1856-1 Chimneys - Requirements for metal chimneys. Part 1: System chimney products | |
| Draft BS EN 1856-2 Chimneys - Requirements for metal chimneys. Part 2: Metal flue liners and connecting flue pipes | |
| Draft BS EN 2002-001 Aerospace series - Metallic materials - Test methods. Part 001: Tensile testing at ambient temperature | |
| Draft BS EN 30-1-4 Domestic cooking appliances burning gas - Safety. Part 1-4: Appliances having one or more burners with an automatic burner control system | |
| Draft BS EN 415-4 Safety of packaging machines. Part 4: Palletizers and depalletizers and associated equipment | |
| Draft BS EN 4165-009 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous. Part 009: Rack and panel plug for 2 and 4 modules, series 3... | |
| Draft BS EN 4165-012 Aerospace series - Connectors, electrical, rectangular, modular - Operating temperature 175 \xb0C continuous. Part 012: Flange mounting receptacle 2 and 4 modules, series 3 - Product... | |
| Draft BS EN 4258 Aerospace series - Metallic materials - General organization of standardization - Link between types of European Standards and their use | |
| Draft BS EN 4287 Aerospace series - Aluminium alloy AL-P7010 - Forging stock | |
| Draft BS EN 4529-003 Aerospace series - Elements of electrical and optical connection - Sealing plugs. Part 003: Class T - Product standard | |
| Draft BS EN 4709-001 Aerospace series - Unmanned Aircraft Systems. Part 001: Product requirements and verification | |
| Draft BS EN 4876 - Aerospace series \x97 Environmental testing \x97 Durability of the displays by general usage | |
| Draft BS EN 4902 Aerospace series - Surface treatments - Definitions and test methods | |
| Draft BS EN 50065-4-2 Signalling on low voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 4-2: Low voltage decoupling filters - Safety requirements | |
| Draft BS EN 50065-4-7 Signalling on low-voltage electrical installations in the frequency range 3 kHz to 148,5 kHz. Part 4-7: Portable low voltage decoupling filters - Safety requirements | |
| Draft BS EN 50121-3-1 Railway applications - Electromagnetic compatibility. Part 3-1: Rolling stock - Train and complete vehicle | |
| Draft BS EN 50121-3-2 Railway applications - Electromagnetic compatibility. Part 3-2: Rolling stock - Apparatus | |
| Draft BS EN 50121-4 Railway applications - Electromagnetic compatibility. Part 4: Emission and immunity of the signalling and telecommunications apparatus | |
| Draft BS EN 50121-5 Railway applications - Electromagnetic compatibility. Part 5: Emission and immunity of fixed power supply installations and apparatus | |
| Draft BS EN 50411-3-1 Fibre management systems and protective housings to be used in optical fibre communication systems - Product specifications. Part 3-1: Fibre management system, splice wall box, for... | |
| Draft BS EN 659 Protective gloves for firefighters | |
| Draft BS EN 933-1 Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method | |
| Draft BS EN 933-11 Tests for geometrical properties of aggregates. Part 11: Classification test for the constituents of coarse recycled aggregate | |
| Draft BS EN 936 Chemicals used for treatment of water intended for human consumption - Carbon dioxide | |
| Draft BS HD 604-S2 0,6/1,0 kV power cables with special fire performance for use in power stations and similar installations | |
| Draft HD 60364-7-730 Low-voltage electrical installations. Part 7-730: Requirements for special installations or locations - Onshore units of electrical shore connections for inland navigation vessels | |
| Effects of Different Shot Peening Treatments in Combination with a Superfinishing Process on the Surface Durability of Case-Hardened Gears | |
| Electromagnetic compatibility (EMC) Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test - Interpretation Sheet 1 | |
| Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings | |
| Engins de manutention continue - Transporteurs \xe0 courroie pour produits en vrac pour service mod\xe9r\xe9 | |
| Erosion of Concrete in Hydraulic Structures | |
| Essais de corrosion en atmosph\xe8res artificielles - Essais de corrosion acc\xe9l\xe9r\xe9e par expositions altern\xe9es \xe0 des gaz oxydants ou au brouillard salin neutre et \xe0 un s\xe9chage RECTIFICATIF TECHNIQUE 1... | |
| Essais de corrosion en atmosph\xe8res artificielles - Essais de corrosion acc\xe9l\xe9r\xe9e par expositions altern\xe9es \xe0 des gaz oxydants ou au brouillard salin neutre et \xe0 un s\xe9chage | |
| Essential oils \x97 General requirements and guidelines for packaging, conditioning and storage | |
| Essential oils \x97 General requirements for labelling and marking of containers | |
| Evaluation of Double Flank Testers for Radial Composite Measurement of Gears | |
| Fibre-reinforced plastic composites \x97 Determination of laminate through-thickness properties \x97 Part 1: Direct tension and compression tests | |
| Fibre-reinforced plastic compositess - Determination of laminate through-thickness properties - Part 2: Determination of the elastic modulus, the strength and the Weibull size effects by flexural test of unidirectional laminate,... | |
| Fine bubble technology - Storage and transportation of ultrafine bubble dispersion in water | |
| Fine bubble technology \x97 Cleaning applications \x97 Part 2: Test method for cleaning machine-oil stained surfaces of machined metal parts | |
| Fine bubble technology \x97 Cleaning applications \x97 Part 3: Test method for cleaning hard flooring surfaces | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Qualitative and semiquantitative assessment of the photocatalytic activities of surfaces by the reduction of resazurin in a deposited ink film | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramic thin plates at room temperature | |
| Fine-Cut Tobacco and Smoking Articles Made From It - Survey and Analysis of Consumer-Made Articles | |
| Fire Hose Assemblies and Fire Hose Couplings | |
| Fire Hose | |
| FIRE PUMP CODE AND HANDBOOK SET | |
| Fire Pump Handbook | |
| Footwear \x97 Chemical tests \x97 General principles on the preparation of samples | |
| Forensic sciences \x97 Part 3: Analysis | |
| Forensic sciences \x97 Part 4: Interpretation | |
| Forensic sciences \x97 Part 5: Reporting | |
| Fundamental Rating Factors and Calculation Methods for Involute Spur and Helical Gear Teeth | |
| Gants \xe0 usage m\xe9dical - D\xe9termination de la poudre r\xe9siduelle en surface | |
| Gas cylinders Identification and marking using radio frequency identification technology Part 1: Reference architecture and terminology | |
| Gasoline engines with direct fuel injection (GDI engines) - Installation of the high pressure fuel pump to the engine | |
| Gear Sliding Losses | |
| Glyc\xe9rines \xe0 usage industriel - M\xe9thodes d\x92\xe9chantillonn age | |
| Glycerols for Industrial Use - Determination of Ash - Gravimetric Method | |
| Graines ol\xe9agineuses - \xc9chantillonnage discontinu manuel ou automatique | |
| Guidance for carrying out a Base Radio Station complying with limits for human exposure to high frequency electromagnetic fields - Appendix G: Evaluation of the software for the previsional calculation... | |
| Guidance for carrying out a Base Radio Station complying with limits for human exposure to high frequency electromagnetic fields | |
| Guidance on unit pricing | |
| Guide for Building and Classing International Naval Ships Part 3 Hull Construction and Equipment | |
| Guide for in situ measurements - In situ measurement of disturbance emission | |
| Guide for Proportioning Concrete Mixtures with Ground Limestone and Other Mineral Fillers | |
| Guide for Selecting Proportions for High-Strength Concrete with Portland Cement and Fly Ash | |
| Guide for Selecting Proportions for No-Slump Concrete | |
| Guide for Submittal of Concrete Proportions | |
| Guide for the measurement and the evaluation of electric and magnetic fields in the frequency range 0 Hz - 10 kHz, with reference to the human exposure | |
| Guide for the measurement and the evaluation of electromagnetic fields in the frequency range 10 kHz - 300 GHz with reference to the human exposure - Appendix A: Monitoring systems... | |
| Guide for the measurement and the evaluation of electromagnetic fields in the frequency range 10 kHz - 300 GHz with reference to the human exposure Appendix B: Measurements and evaluation... | |
| Guide for the measurement and the evaluation of electromagnetic fields in the frequency range 10 kHz - 300 GHz, with reference to the human exposure Annex D: Measurement and assessment... | |
| Guide for the measurement and the evaluation of electromagnetic fields in the frequency range 10 kHz - 300 GHz, with reference to the human exposure Annex E: Measurement of the... | |
| Guide for the measurement and the evaluation of electromagnetic fields in the frequency range 10 kHz - 300 GHz, with reference to the human exposure Appendix C: Sistems to implement... | |
| Guide for the measurement and the evaluation of electromagnetic fields in the frequency range 10 kHz - 300 GHz, with reference to the human exposure | |
| Guide for the Use of High-Range Water-Reducing Admixtures (Superplasticizers) in Concrete | |
| Guide to calculation methods of electric and magnetic fields generated by power-lines and electrical substations | |
| Guide to Selecting Proportions for Pumpable Concrete | |
| Guide to Troubleshooting Concrete Mixture Issues as Influenced by Constitutive Materials, Jobsite Conditions, or Testing Practices | |
| GUIDELINES FOR COMBINING NATURAL AND EXTERNAL MAN-MADE HAZARDS AT POWER REACTOR SITES | |
| Guidelines for Evaluating Site-Related Geotechnical Parameters at Nuclear Power Sites | |
| GUIDELINES FOR RETRIEVAL, REVIEW, PROCESSING AND EVALUATION OF RECORDS OBTAINED FROM SEISMIC INSTRUMENTATION | |
| Heavy commercial vehicles and buses \x97 Vehicle dynamics simulation and validation \x97 Closing-curve test | |
| Hexagon socket head cap screws with metric fine pitch thread | |
| Huile essentielle de pin de montagne (Pinus mugo Turra) | |
| Huiles essentielles - \xc9chantillonnage AMENDEMENT 1 | |
| Hygrothermal performance of building materials and products - Determination of water-vapour transmission properties - Box method | |
| In vitro diagnostic medical devices \x97 Requirements for international harmonisation protocols establishing metrological traceability of values assigned to calibrators and human samples | |
| Industrial trucks \x97 Safety rules for application, operation and maintenance | |
| Industrial Ventilation A Manual of Recommended Practice for Design | |
| Industrial Ventilation: A Manual of Recommended Practice for Design | |
| Industrial Ventilation: A Manual of Recommended Practice for Operation and Maintenance | |
| Information and documentation - Quality assessment for national libraries | |
| Information and documentation \x97 Emergency preparedness and response | |
| Information and documentation \x97 Key indicators for museums | |
| Information et documentation - Num\xe9ro international normalis\xe9 du livre (ISBN) | |
| Information et documentation - Une ontologie de r\xe9f\xe9rence pour l\x92\xe9change d\x92informations du patrimoine culturel | |
| Information et documentation \x97 Code international normalis\xe9 des textes (ISTC) | |
| Informatique de sant\xe9 - R\xf4les fonctionnels et structurels | |
| Informatique de sant\xe9 - Services d\x92annuaires pour les fournisseurs de soins de sant\xe9, les sujets de soins et autres entit\xe9s | |
| Informatique de sant\xe9 - Types de donn\xe9es harmonis\xe9es pour une interchangeabilit\xe 9 d'informations | |
| Installations de traite automatique - Exigences et essais | |
| Intelligent transport systems - Communications access for land mobiles (CALM) - 2G Cellular systems | |
| Intelligent transport systems - Communications access for land mobiles (CALM) - 3G Cellular systems | |
| Intelligent transport systems - Communications access for land mobiles (CALM) - Access technology support AMENDMENT 1 | |
| Intelligent transport systems - Communications access for land mobiles (CALM) - IPv6 Networking AMENDMENT 1 | |
| Intelligent transport systems - Communications access for land mobiles (CALM) - IPv6 Networking | |
| Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 18: Traffic flow and prediction application (TPEG2-TFP) | |
| Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 2: UML modelling rules (TPEG2-UMR) | |
| Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 3: UML to binary conversion rules (TPEG2-UBCR) | |
| Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 4: UML to XML conversion rules | |
| Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 5: Service framework (TPEG2-SFW) | |
| Intelligent transport systems - Traffic and travel information(TTI) via transport protocol experts group, generation 2 (TPEG2) - Part 6: Message management container (TPEG2-MMC) | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 M5 | |
| Intelligent transport systems \x97 Communications access for land mobiles (CALM) \x97 Medium service access points | |
| Intelligent transport systems \x97 ITS station security services for secure session establishment and authentication between trusted devices | |
| Intelligent transport systems \x97 Partially automated lane change systems (PALS) \x97 Functional / operational requirements and test procedures | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 10: Conditional access information (TPEG2-CAI) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 14: Parking information (TPEG2-PKI) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 15: Traffic event compact (TPEG2-TEC) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 16: Fuel price information and availability (TPEG2-FPI) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 19: Weather information (TPEG2-WEA) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 1: Introduction, numbering and versions (TPEG2-INV) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 21: Geographic location referencing (TPEG-GLR) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 25: Electromobility charging infrastructure (TPEG2-EMI) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 7: Location referencing container (TPEG2-LRC) | |
| Intelligent transport systems \x97 Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) \x97 Part 9: Service and network information (TPEG2-SNI) | |
| Intelligent transport systems \x97 Traffic and travel information via transport protocol experts group, generation 2 (TPEG2) \x97 Part 17: Speed information (TPEG2-SPI) | |
| Intelligent transport systems \x97 Wireless communications \x97 CALM using millimetre communications \x97 Air interface | |
| Intelligent transport systems Continuous air interface, long and medium range (CALM) Infra-red systems | |
| Iron ores - Determination of specific surface area - Test method using airpermeability apparatus (Blaine) | |
| LABORATORY METHODS OF TESTING FANS FOR CERTIFIED AERODYNAMIC PERFORMANCE RATING | |
| Laboratory Methods of Testing Fans for Rating | |
| Lait - Mesure quantitative de la qualit\xe9 bact\xe9riologique - Lignes directrices pour \xe9tablir et v\xe9rifier une relation de conversion entre les r\xe9sultats de la m\xe9thode de routine et les r\xe9sultats... | |
| Lasers and laser-related equipment - Test methods for laser-induced damage threshold - Part 1: Definitions and general principles | |
| Lasers and laser-related equipment \x97 Test methods for laser-induced damage threshold \x97 Part 2: Threshold determination | |
| Lasers and laser-related equipment \x97 Test methods for laser-induced damage threshold \x97 Part 3: Assurance of laser power (energy) handling capabilities | |
| LOW-VOLTAGE AIR CIRCUIT BREAKERS (Published for one year trial use) | |
| M\xe9thode d'essai pour mesurer l'efficacit\xe9 des m\xe9dias de filtration d'air par rapport aux nanomat\xe9riaux sph\xe9riques - Partie 1: Spectre granulom\xe9trique de 20 nm \xe0 500 nm | |
| Machinery for forestry \x97 Forestry mulching equipment \x97 Terms, definitions and commercial specifications | |
| Mat\xe9riel agricole - Liaisons m\xe9caniques entre v\xe9hicules tracteurs et v\xe9hicules tract\xe9s - Attelages \xe0 anneau pour instruments et fixation \xe0 la barre d'attelage | |
| Mat\xe9riel de protection des cultures - Incorporateurs - Partie 2: Exigences g\xe9n\xe9rales et limites de performance | |
| Mat\xe9riel de protection des cultures \x97 Incorporateurs \x97 Partie 1: M\xe9thodes d'essai | |
| Mat\xe9riel de protection des cultures \x97 Syst\xe8mes de transfert ferm\xe9s (STF) \x97 Sp\xe9cification des performances | |
| Measurement and characterization of particles by acoustic methods - Part 2: Guidelines for linear theory | |
| Measurement and characterization of particles by acoustic methods - Part 3: Guidelines for non-linear theory | |
| Measurement and characterization of particles by acoustic methods Part 1: Concepts and procedures in ultrasonic attenuation spectroscopy | |
| Measuring Instrument Calibration - Part I, Involute Measurement (Metric) | |
| Measuring Instrument Calibration, Gear Pitch and Runout Measurements | |
| Measuring Instrument Calibration, Gear Tooth Alignment Measurement | |
| Metallic and other inorganic coatings - DC magnetron sputtered silver coatings for engineering purposes - Measurement of coating adhesion | |
| Method of Test for Determining Energy Performance and Water-Use Efficiency of Add-On Evaporative Precoolers for Unitary Air-Conditioning Equipment | |
| Method of Testing for Rating Remote Mechanical-Draft Air-Cooled Refrigerant Condensers | |
| Microbiologie de la cha\xeene alimentaire \x97 Exigences et lignes directrices pour la r\xe9alisation des tests d'\xe9preuve microbiologique \x97 Partie 1: Tests de croissance pour \xe9tudier le potentiel de croissance, le... | |
| Microbiology of the food chain \x97 Requirements and guidelines for conducting challenge tests of food and feed products \x97 Part 2: Challenge tests to study inactivation potential and kinetic parameters... | |
| Microscopes \x97 Microscopes confocaux \x97 Donn\xe9es optiques des microscopes confocaux \xe0 fluorescence pour l'imagerie biologique | |
| Mission operations - MAL space packet transport binding and binary encoding | |
| Moteurs \xe0 combustion interne - D\xe9claration du poids (de la masse) du moteur | |
| Multilayer piping systems for hot and cold water installations inside buildings - Part 2: Pipes | |
| Multilayer piping systems for hot and cold water installations inside buildings \x97 Part 2: Pipes AMENDMENT 1 | |
| Multilayer piping systems for hot and cold water installations inside buildings \x97 Part 3: Fittings AMENDMENT 1 | |
| Nicotine pouches \x97 Test method for pH | |
| Numbering of Electrodes and Designation of Units in Electron Tubes | |
| Office Experience Exchange Report (EER): Top- Level National Market and All Individual Markets | |
| Office Experience Exchange Report (EER): Top-Level National Market | |
| Office furniture - Office work chairs - Test methods for the determination of stability, strength and durability | |
| Office furniture \x97 Tables and desks \x97 Test methods for the determination of stability, strength and durability | |
| Opportunity-charging of lead-acid traction batteries | |
| Optics and photonics - Telescopic systems - Specifications for night vision devices | |
| Organizaciones educativas \x97 Sistemas de gesti\xf3n para organizaciones educativas \x97 Requisitos con orientaci\xf3n para su uso MODIFICACI\xd3N 1: Acciones relativas al cambio clim\xe1tico | |
| Organizaciones educativas \x97 Sistemas de gesti\xf3n para organizaciones educativas \x97 Requisitos con orientaci\xf3n para su uso | |
| Outillage de presse \x97 Vocabulaire | |
| Packaging - Vocabulary - Part 1: General terms | |
| Packaging - Vocabulary - Part 2: Packaging and the environment terms | |
| Packaging \x97 Vocabulary | |
| Peintures et vernis - \xc9valuation par imagerie optique des d\xe9fauts des surfaces rev\xeatues - Partie 1: Lignes directrices g\xe9n\xe9rales | |
| Peintures et vernis - \xc9valuation par imagerie optique des d\xe9fauts des surfaces rev\xeatues - Partie 2: Mode op\xe9ratoire d'\xe9valuation pour l'essai d'impacts multiples de cailloux | |
| Peintures et vernis - \xc9valuation par imagerie optique des d\xe9fauts des surfaces rev\xeatues - Partie 3: \xc9valuation du d\xe9collement et de la corrosion autour d'une rayure | |
| Peintures et vernis - \xc9valuation par imagerie optique des d\xe9fauts des surfaces rev\xeatues - Partie 4: \xc9valuation de la corrosion filiforme | |
| Performance of buildings \x97 Building enclosure thermal performance verification and commissioning \x97 Part 1: General requirements | |
| Performance Rating of Unitary Air-conditioning & Air-source Heat Pump Equipment | |
| Plastics - Determination of the transient extensional viscosity of polymer melts | |
| Plastics - Polymer polyols for use in the production of polyurethane - Determination of the residual acrylonitrile and styrene monomer content by gas chromatography | |
| Plastics Epoxy resins Determination of 1,2-glycol content | |
| Plastics piping systems for industrial applications \x97 Unplasticized polyamide (PA-U) \x97 Metric series for specifications for components and system | |
| Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply | |
| Plastiques (r\xe9sines de polyesters) et peintures et vernis (liants) - D\xe9termination de l'indice d'acide partiel et de l'indice d'acide total | |
| Plastiques - Mat\xe9riaux \xe0 base de copolym\xe8re \xe9thyl\xe8ne-ac\xe 9tate de vinyle (EVAC) pour moulage et extrusion - Partie 2: Pr\xe9paration des \xe9prouvettes et d\xe9termination des propri\xe9t\xe9s | |
| Plastiques - Mat\xe9riaux \xe0 base de copolym\xe8res \xe9thyl\xe8ne/ac\xe 9tate de vinyle (EVAC) pour moulage et extrusion - Partie 1: Syst\xe8me de d\xe9signation et base de sp\xe9cification | |
| Plastiques - Mat\xe9riaux \xe0 base de poly\xe9thyl\xe8ne \xe0 tr\xe8s haute masse mol\xe9culaire (PE-UHMW) pour moulage et extrusion - Partie 1: Syst\xe8me de d\xe9signation et base de sp\xe9cifications | |
| Plastiques - Mat\xe9riaux \xe0 base de polybut\xe8ne-1 (PB-1) pour moulage et extrusion - Partie 2: Pr\xe9paration des \xe9prouvettes et d\xe9termination des propri\xe9t\xe9s | |
| Plastiques \x97 Mat\xe9riaux \xe0 base de poly\xe9thyl\xe8ne \xe0 tr\xe8s haute masse mol\xe9culaire (PE-UHMW) pour moulage et extrusion \x97 Partie 2: Pr\xe9paration des \xe9prouvettes et d\xe9termination des propri\xe9t\xe9s | |
| Pompes - Dispositifs d'\xe9tanch\xe9it\xe 9 de l'arbre pour pompes centrifuges et rotatives | |
| Portable lead-acid cells and batteries (Valve-regulated types) - Part 3: Safety recommendations for use in electric appliances | |
| Powered ride-on turf care equipment \x97 Roll-over protective structures (ROPS) \x97 Test procedures and acceptance criteria | |
| Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures | |
| Premi\xe8re \xe9dition | |
| Priests (caper) (Capparis spp.) \x97 Specification and test methods | |
| Professional Qualifications Standard for Rainwater Catchment Systems Personnel | |
| Proth\xe8ses et orth\xe8ses - Orth\xe8ses de pied - Utilisations, fonctions, classification et description | |
| Proth\xe8ses et orth\xe8ses - Orth\xe8ses souples - Utilisations, fonctions, classification et description | |
| Proth\xe8ses et orth\xe8ses - Termes associ\xe9s au traitement et \xe0 la r\xe9adaptation de personnes amput\xe9es du membre inf\xe9rieur | |
| Public key infrastructure for financial services Practices and policy framework | |
| Qualit\xe9 de l'air - Lignes directrices pour estimer l'incertitude de mesure | |
| Qualit\xe9 de l'eau \x97 D\xe9termination de la toxicit\xe9 aigu\xeb d'\xe9chantillons d'eau et de produits chimiques vis-\xe0-vis de la lign\xe9e cellulaire de branchies de poissons (RTgill-W1) | |
| Qualit\xe9 de l'eau \x97 M\xe9thodes d'analyse de compos\xe9s multi-classes \x97 Partie 1: Crit\xe8res pour l'identification de compos\xe9es cibles par chromatographie en phase gazeuse ou liquide et spectrom\xe9trie de masse | |
| Qualit\xe9 de l'eau \x97 M\xe9thodes d'analyse de compos\xe9s multi-classes \x97 Partie 2: Crit\xe8res pour la d\xe9termination quantitative de compos\xe9s organiques avec une m\xe9thode d'analyse de compos\xe9s multi-classes | |
| Qualit\xe9 du sol - Effets des polluants vis-\xe0-vis des larves d'insectes (Oxythyrea funesta) - D\xe9termination de la toxicit\xe9 aigu\xeb | |
| Qualit\xe9 du sol \x97 Identification des esp\xe8ces par code-bare ADN dans les essais d'\xe9cotoxicologie | |
| Qualit\xe9 du sol \x97 Inhibition de la reproduction de l'acarien pr\xe9dateur (Hypoaspis aculeifer) par des contaminants du sol | |
| Qualit\xe9 du sol \x97 Modes op\xe9ratoires de lixiviation en vue d'essais chimiques et \xe9cotoxicologiques ult\xe9rieurs des sols et mat\xe9riaux analogues au sol \x97 Partie 1: Essai en b\xe2ch\xe9e avec un... | |
| Qualit\xe9 du sol \x97 Modes op\xe9ratoires de lixiviation en vue d'essais chimiques et \xe9cotoxicologiques ult\xe9rieurs des sols et mat\xe9riaux analogues au sol \x97 Partie 4: Essai de d\xe9pendance au pH... | |
| Qualit\xe9 du sol \x97 Modes op\xe9ratoires de lixiviation en vue d'essais chimiques et \xe9cotoxicologiques ult\xe9rieurs des sols et mat\xe9riaux du sol \x97 Partie 2: Essai en b\xe2ch\xe9e avec un rapport... | |
| Qualit\xe9 du sol \x97 Modes op\xe9ratoires de lixiviation en vue d'essais chimiques et \xe9cotoxicologiques ult\xe9rieurs des sols et mat\xe9riaux du sol \x97 Partie 3: Essai de percolation \xe0 \xe9coulement ascendant... | |
| Quasi-Static Transmission Error Behavior Under the Composite Effect of Temperature and Load | |
| R\xe9cipients cryog\xe9niques - Dispositifs de s\xe9curit\xe9 pour le service cryog\xe9nique - Partie 3: D\xe9termination de la taille et du volume | |
| R\xe9cipients cryog\xe9niques - Exigences de t\xe9nacit\xe9 pour les mat\xe9riaux \xe0 temp\xe9rature cryog\xe9nique - Partie 1: Temp\xe9ratures inf\xe9rieures \xe0 -80 \xb0C | |
| R\xe9cipients cryog\xe9niques - Exigences de t\xe9nacit\xe9 pour les mat\xe9riaux \xe0 temp\xe9rature cryog\xe9nique - Partie 2: Temp\xe9ratures comprises entre -80 degr\xe9s C et -20 degr\xe9s C | |
| R\xe9cipients cryog\xe9niques - R\xe9cipients transportables, isol\xe9s, sous vide, d\x92un volume n\x92exc\xe9dant pas 1 000 litres - Partie 2: Exigences de fonctionnement | |
| R\xe9cipients cryog\xe9niques - R\xe9cipientsfixes isol\xe9s sous vide - Partie 2:Exigences de fonctionnement | |
| R\xe9cipients cryog\xe9niques - Tuyaux flexibles | |
| Radioprotection - Crit\xe8res de performance pour les laboratoires pratiquant le tri par cytog\xe9n\xe9tique en cas d'accident radiologique ou nucl\xe9aire affectant un grand nombre de personnes - Principes g\xe9n\xe9raux et application... | |
| Renforts - Tissus - Base de sp\xe9cification | |
| Report on Chemical Admixtures for Concrete | |
| Restrained joint systems for ductile iron pipelines \x97 Calculation rules for lengths to be restrained | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/ natural gas blends fuel systems - Part 1: Safety requirements | |
| Road vehicles - Compressed gaseous hydrogen (CGH2) and hydrogen/ natural gas blends fuel systems - Part 2: Test methods | |
| Road vehicles \x97 Dimethyl Ether (DME) refuelling connector | |
| Road vehicles \x97 Heavy commercial vehicles and buses \x96 Mass moment of inertia measurement | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 10: Transport layer and network layer conformance test plans | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 11: Application layer to session layer conformance test plans | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 1: General information and definitions | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 2: Common physical entity requirements | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 3: Optical 1-Gbit/s physical entity requirements and conformance test plan | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 4: General requirements and test methods of optical gigabit Ethernet components | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 5: Optical 1-Gbit/s physical layer system requirements and test plans | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 6: Electrical 100-Mbit/s physical entity requirements and conformance test plan | |
| Road vehicles \x97 In-vehicle Ethernet \x97 Part 8: Electrical 100-Mbit/s Ethernet transmission media, components and tests | |
| Road vehicles \x97 Test of braking systems on vehicles with a maximum authorized total mass of over 3,5 t using a roller brake tester \x97 Part 2: Air over hydraulic... | |
| Rolling bearings \x97 Noise testing of rolling bearing greases \x97 Part 1: Basic principles, testing assembly and test machine | |
| Rolling bearings \x97 Noise testing of rolling bearing greases \x97 Part 2: Test and evaluation method BQ+ | |
| Rolling bearings \x97 Noise testing of rolling bearing greases \x97 Part 3: Test and evaluation method MQ | |
| Rolling bearings \x97 Noise testing of rolling bearing greases \x97 Part 4: Test and evaluation method NQ | |
| Roulements et rotules lisses - Structure de recherche pour supports \xe9lectroniques - Caract\xe9ristiques et crit\xe8res de performance identifi\xe9s par un vocabulaire particulier | |
| Service Life of Cylindrical and Bevel Gears Under Variable Load and Stresses | |
| Ships and marine technology - Ball valves for use in low temperature applications - Design and testing requirements | |
| Ships and marine technology - Butterfly valves for use in low temperature applications - Design and testing requirements | |
| Ships and marine technology - Marine cranes - Manufacturing requirements | |
| Ships and marine technology - Marine environment protection: performance testing of oil skimmers - Part 1: Moving water conditions | |
| Ships and marine technology \x97 Major components of emergency towing arrangements | |
| Ships and marine technology \x97 Marine cranes \x97 Noise limits and measuring method | |
| Ships and marine technology \x97 Marine cranes \x97 Operation and maintenance requirements | |
| Ships and marine technology \x97 Marine environment protection \x97 Management and handling of shipboard garbage AMENDMENT 1: Updates to classification of garbage | |
| Ships and marine technology \x97 Marine environment protection \x97 Management and handling of shipboard garbage | |
| Ships and marine technology \x97 Marine environment protection: performance testing of oil skimmers \x97 Part 2: Static water conditions | |
| Ships and marine technology \x97 Marine environment protection: performance testing of oil skimmers \x97 Part 3: High viscosity oil | |
| Ships and marine technology \x97 Systems for the detection of persons while going overboard from ships (man overboard detection) | |
| Ships and marine technology Thermally toughened safety-glass panes for windows and side scuttles | |
| Silicates de sodium et de potassium \xe0 usage industriel - Mise en solution des produits difficilement solubles dans l\x92eau bouillante et d\xe9termination de l\x92insoluble dans l\x92eau | |
| Silk - Test method for determining the size of silk yarns | |
| Simplified design for mechanical connections between precast concrete structural elements in buildings | |
| Single Tooth Bending Fatigue Testing at any R Ratio | |
| Slow-release fertilizers - Determination of the release of the nutrients - Method for coated fertilizers | |
| Sodium and Potassium Silicates for Industrial Use - Determination of Dynamic Viscosity | |
| Sodium and Potassium Silicates for Industrial Use - Determination of Silica Content - Titrimetric Method | |
| Soil quality \x97 Guideline for the screening of soil polluted with toxic elements using soil magnetometry | |
| Soil quality \x97 Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil-like materials \x97 Part 5: Batch test with forced aerobic or anaerobic conditions | |
| Sp\xe9cifications g\xe9om\xe9triques des produits (GPS) \x97 Sp\xe9cification de transition | |
| Space data and information transfer systems - Digital motion imagery | |
| Space data and information transfer systems - Licklider transmission protocol (LTP) for CCSDS | |
| Space data and information transfer systems - Space communications cross support - Architecture requirements document | |
| Space systems \x97 Requirements for small spacecraft | |
| Spices and condiments \x97 Dried lime (whole, slices and ground) \x97 Specification | |
| Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances | |
| STANDARD FOR COMMERCIAL BUILDING ENERGY AUDITS | |
| STANDARD FOR THE INSTALLATION OF STATIONARY PUMPS FOR FIRE PROTECTION | |
| Standard Guidelines for the Design and Installation of Pile Foundations | |
| Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire | |
| Standard on Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire | |
| Standard on Selection, Care, Use, and Maintenance of Flame-Resistant Garments for Protection of Industrial Personnel Against Flash Fire | |
| Standard Practice for Selecting Proportions for Normal, Heavyweight, and Mass Concrete | |
| Standard Practice for Selecting Proportions for Structural Lightweight Concrete | |
| Submersibles \x97 Hydrostatic pressure test \x97 Pressure hull and buoyancy materials | |
| Surface active agents - Detergents - Determination of alkylphenol ethoxylates | |
| Surface chemical analysis \x97 Scanning probe microscopy \x97 Procedure for the determination of elastic moduli for compliant materials using atomic force microscope and the two-point JKR method | |
| Surface chemical analysis X-ray photoelectron and Auger electron spectrometers Linearity of intensity scale | |
| Surface Durability (Pitting) of Helical and Herringbone Gear Teeth | |
| Surface Durability (Pitting) of Spur Gear Teeth | |
| Surveillance et diagnostic des syst\xe8mes de machines - Analyse de la signature \xe9lectrique des moteurs triphas\xe9s \xe0 induction | |
| Syst\xe8mes d'\xe9chantillonnage de tol\xe9rance z\xe9ro-d\xe9faut et proc\xe9dures de ma\xeetrise des processus combin\xe9s pour l'acceptation de produits | |
| Syst\xe8mes de canalisations en plastique pour le remplacement sans tranch\xe9e des r\xe9seaux de canalisations enterr\xe9s - Partie 1: Remplacement sur ligne par \xe9clatement de tuyau et extraction de tuyau | |
| Syst\xe8mes de canalisations en plastique pour le remplacement sans tranch\xe9e des r\xe9seaux de canalisations enterr\xe9s - Partie 2: Remplacement hors ligne par forage horizontal dirig\xe9 et fon\xe7age par fus\xe9e | |
| Syst\xe8mes de canalisations en plastique pour les branchements et les collecteurs d'assainissement sans pression enterr\xe9s - Syst\xe8mes de canalisations \xe0 parois structur\xe9es en poly(chlorure de vinyle) non plastifi\xe9 (PVC-U), polypropyl\xe8ne... | |
| Syst\xe8mes de canalisations multicouches pour installations d'eau chaude et froide \xe0 l'int\xe9rieur des b\xe2timents - Partie 3: Raccords | |
| Syst\xe8mes de canalisations multicouches pour installations d'eau chaude et froide \xe0 l'int\xe9rieur des b\xe2timents - Partie 5: Aptitude \xe0 l'emploi du syst\xe8me | |
| Syst\xe8mes de canalisations multicouches pour installations d'eau chaude et froide \xe0 l'int\xe9rieur des b\xe2timents \x97 Partie 1: G\xe9n\xe9ralit\xe9s | |
| Syst\xe8mes intelligents de transport - Acc\xe8s aux communications des services mobiles terrestres (CALM) - Architecture | |
| Tabac et produits du tabac - Dosage de l'ammoniac - M\xe9thode par chromatographie ionique | |
| Technical product documentation \x97 Requirements for digital mock-up virtual assembly test for mechanical products | |
| Technologies de l\x92information - Communication de donn\xe9es - Connecteur d\x92interface ElTD/ETCD \xe0 25 p\xf4les et affectation des num\xe9ros de contacts | |
| Test method for fibre-reinforced cementitious composites - Loaddeflection curve using circular plates | |
| Test Method for Vertical Wicking Rate of Textiles: to Specified Times | |
| Test procedures for determining physical properties of brush materials for electrical machines | |
| Textiles - D\xe9termination de l'effet hydratant des mati\xe8res textiles par le mesurage du microclimat entre les textiles et la peau humaine simul\xe9e \xe0 l'aide d'une plaque chaude gard\xe9e transpirante | |
| Textiles - M\xe9thode de d\xe9termination de la teneur en alkylph\xe9nols (AP) | |
| Thrust Needle Roller and Cage Assemblies and Thrust Washers Inch Design | |
| Thrust Needle Roller and Cage Assemblies and Thrust Washers Metric Design | |
| Tourisme d\x92aventure - Informations aux participants | |
| Tourisme d\x92aventure - Syst\xe8mes de management de la s\xe9curit\xe9 - Exigences | |
| Traditional Chinese medicine - Guidelines and specification for Chinese materia medica | |
| Traditional Chinese medicine \x97 Electric heating moxibustion equipment | |
| Traditional Chinese medicine \x97 Therapeutic fumigation devices | |
| Transmissions hydrauliques - Surveillance du niveau de pollution particulaire des fluides - Partie 1: Principes g\xe9n\xe9raux | |
| Transmissions hydrauliques - Surveillance du niveau de pollution particulaire des fluides - Partie 4: Technique d\x92absorption de lumi\xe8re | |
| Transmissions hydrauliques \x97 Surveillance du niveau de pollution particulaire des fluides \x97 Partie 3: Technique de colmatage de filtre | |
| Transmissions pneumatiques - V\xe9rins - V\xe9rins compacts, s\xe9rie 1 000 kPa (10 bar), al\xe9sages de 20 mm \xe0 100 mm | |
| UL Standard for Safety Halocarbon Clean Agent Fire Extinguishers | |
| UL Standard for Safety Inert Gas Clean Agent Extinguishing System Units | |
| UL Standard for Safety Motor-Operated Air Compressors for Use in Sprinkler Systems | |
| UL Standard for Safety Processed Solid-Fuel Firelogs | |
| UL Standard for Safety Reference Standard for Double Insulation Systems for Use in Electronic Equipment | |
| Unitary Air-Conditioning and Air-Source Heat Pump Equipment | |
| V\xe9hicules routiers - Essai des syst\xe8mes de freinage des v\xe9hicules ayant une masse totale maximale autoris\xe9e sup\xe9rieure \xe0 3,5 t effectu\xe9 sur banc d'essai de freinage \xe0 rouleaux Partie 1:... | |
| Validation of a Generalized Formulation for Load-Sharing Behavior in Epicyclic Gears for Wind Turbines | |
| Vertical Pumps for Nomenclature, Definitions, Application and Operation | |
| Vibrations et chocs m\xe9caniques - Param\xe8tres \xe0 sp\xe9cifier pour l'acquisition de donn\xe9es vibratoires | |
| VIDEO RECORDING - 1-IN TYPE C RECORDERS AND REPRODUCERS - FREQUENCY RESPONSE AND REFERENCE LEVEL |
| << Prev | Next >> |