Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
25
26
27
28
29
30
31
32
33
34
35
36
37
40
50
60
70
80
90
100
150
200
250
300
350
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| 2021 AASHTO ANNUAL STATE DOT HR METRICS REPORT | |
| \xc9quipement de protection individuelle - Chaussures de protection AMENDEMENT 1 | |
| \xc9quipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors d\x92op\xe9rations de soudage - Partie 1: Exigences et m\xe9thode d\x92essai pour la protection contre... | |
| \xc9quipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors d\x92op\xe9rations de soudage - Partie 2: Exigences et m\xe9thodes d\x92essai pour la protection contre... | |
| \xc9quipement de protection individuelle - Chaussures de protection contre les risques thermiques et les projections de m\xe9tal fondu comme rencontr\xe9s dans les fonderies et lors d'op\xe9rations de soudage - Exigences... | |
| \xc9quipement de protection individuelle - Chaussures de protection | |
| \xc9quipement de protection individuelle - Chaussures de s\xe9curit\xe9 | |
| \xc9quipement de protection individuelle - Chaussures de travail AMENDEMENT 1 | |
| \xc9quipement de protection individuelle - M\xe9thodes d\x92essai pour les chaussures | |
| \xc9quipement de protection individuelle \x97 Chaussures de protection contre les risques dans les fonderies et lors d'op\xe9rations de soudage \x97 Partie 1: Exigences et m\xe9thode d'essai pour la protection contre... | |
| \xc9quipement de protection individuelle \x97 Chaussures de protection contre les risques dans les fonderies et lors d'op\xe9rations de soudage \x97 Partie 2: Exigences et m\xe9thodes d'essai pour la protection contre... | |
| \xc9quipement de protection individuelle \x97 Chaussures de travail | |
| \xc9tudes de march\xe9, \xe9tudes sociales et d\x92opinion - Vocabulaire et exigences de service | |
| A\xe9ronautique et espace - C\xe2bles en acier souples pr\xe9form\xe9s pour commandes d\x92a\xe9ronefs - Partie 1: Dimensions et charges | |
| A\xe9ronautique et espace - C\xe2bles en acier souples pr\xe9form\xe9s pour commandes d\x92a\xe9ronefs - Partie 2: Sp\xe9cification technique | |
| A\xe9ronefs - Raccords pour le d\xe9marrage \xe0 l\x92air des moteurs | |
| Accuracy Classification System - Radial Measurements for Cylindrical Gears | |
| Accuracy Classification System - Tangential Measurements for Cylindrical Gears | |
| Accuracy Classification System- Tangential Measurement Tolerance Tables for Cylindrical Gears | |
| Achats responsables - Lignes directrices | |
| Acoustics - Screens, furniture and single objects intended for interior use - Rating of sound absorption and sound reduction of elements based on laboratory measurements | |
| Acoustics \x97 Characterization of sources of structure-borne sound and vibration \x97 Indirect measurement of blocked forces | |
| Adoption of ZigBee 13-0200-00-Smart Energy Profile 2.0 Application Protocol Standard | |
| Aggregates for concrete \x97 Test methods for mechanical and physical properties \x97 Part 1: Determination of bulk density, particle density, particle mass-per-volume and water absorption | |
| Aggregates for concrete \x97 Test methods for mechanical and physical properties \x97 Part 2: Method for determination of resistance to fragmentation by Los Angeles Test (LA-Test) | |
| Aggregates for concrete \x97 Test methods for mechanical and physical properties \x97 Part 3: Determination of aggregate crushing value (ACV) | |
| Aggregates for concrete \x97 Test methods for mechanical and physical properties \x97 Part 4: Determination of ten percent fines value (TFV) | |
| Aggregates for concrete \x97 Test methods for mechanical and physical properties \x97 Part 5: Determination of particle size distribution by sieving method | |
| Air cargo \x97 Restraint slings \x97 Part 1: Design and testing | |
| Air cargo \x97 Restraint slings \x97 Part 2: Utilization requirements and recommendations and lashing calculations | |
| Alimentation en oxyg\xe8ne respirable pour.a\xe9ronefs | |
| Analyses de diagnostic mol\xe9culaire in vitro - Sp\xe9cifications relatives aux processus pr\xe9analytiques pour les tissus congel\xe9s - Partie 1: ARN extrait | |
| Analyses de diagnostic mol\xe9culaire in vitro - Sp\xe9cifications relatives aux processus pr\xe9analytiques pour les tissus congel\xe9s - Partie 2: Prot\xe9ines extraites | |
| Analyses de diagnostic mol\xe9culaire in vitro - Sp\xe9cifications relatives aux processus pr\xe9analytiques pour les tissus fix\xe9s au formol et inclus en paraffine (FFPE) - Partie 1: ARN extrait | |
| Analyses de diagnostic mol\xe9culaire in vitro - Sp\xe9cifications relatives aux processus pr\xe9analytiques pour les tissus fix\xe9s au formol et inclus en paraffine (FFPE) - Partie 2: Prot\xe9ines extraites | |
| Analyses de diagnostic mol\xe9culaire in vitro - Sp\xe9cifications relatives aux processus pr\xe9analytiques pour les tissus fix\xe9s au formol et inclus en paraffine (FFPE) - Partie 3: ADN extrait | |
| Analyses de diagnostic mol\xe9culaire in vitro \x97 Sp\xe9cifications relatives aux processus pr\xe9analytiques pour le sang total veineux \x97 Partie 1: ARN cellulaire extrait | |
| Analyses de diagnostic mol\xe9culaire in vitro \x97 Sp\xe9cifications relatives aux processus pr\xe9analytiques pour le sang total veineux \x97 Partie 2: ADN g\xe9nomique extrait | |
| Analyses de diagnostic mol\xe9culaire in vitro \x97 Sp\xe9cifications relatives aux processus pr\xe9analytiques pour le sang total veineux \x97 Partie 3: ADN libre circulant extrait du plasma | |
| Analyses de diagnostic mol\xe9culaire in vitro \x97 Sp\xe9cifications relatives aux processus pr\xe9analytiques pour les tissus congel\xe9s \x97 Partie 3: ADN extrait | |
| Articles chaussants en caoutchouc - Bottes doubl\xe9es en caoutchouc vulcanis\xe9 \xe0 usage industriel - Sp\xe9cifications RECTIFICATIF TECHNIQUE 1 | |
| Assistive products for tissue integrity when lying down \x97 Part 5: Test method for resistance to cleaning and disinfection | |
| Augmented Reality on Mobile Devices\x97General Requirements for Software Framework, Components, and Integration | |
| Automatic and Open Water-Spray Nozzles for Installation in Permanently Piped Systems | |
| Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 1: Overview and general principles | |
| Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 2: Environmental performance evaluation process | |
| Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 3: Environmental performance evaluation data aggregation process | |
| Automation systems and integration - Evaluating energy efficiency and other factors of manufacturing systems that influence the environment - Part 5: Environmental performance evaluation data | |
| Automotive System Image Quality | |
| Basic Microbiology for Drinking Water | |
| Biotechnologie - \xabBiobanking\xbb - Exigences g\xe9n\xe9rales relatives au \xabbiobanking\xbb | |
| Biotechnologie \x97 S\xe9quen\xe7age massivement parall\xe8le \x97 Partie 2: \xc9valuation de la qualit\xe9 des donn\xe9es de s\xe9quen\xe7age | |
| Biotechnology - Cell counting - Part 1: General guidance on cell counting methods | |
| Biotechnology \x97 Ancillary materials present during the production of cellular therapeutic products and gene therapy products | |
| Biotechnology \x97 Bioprocessing \x97 General requirements for the design of packaging to contain cells for therapeutic use | |
| Biotechnology \x97 Cell counting \x97 Part 2: Experimental design and statistical analysis to quantify counting method performance | |
| Biotechnology \x97 Massively parallel sequencing \x97 Part 1: Nucleic acid and library preparation | |
| Biotechnology \x97 Massively parallel sequencing \x97 Part 3: General requirements and guidance for metagenomics | |
| Biotechnology \x97 Requirements for evaluating the performance of quantification methods for nucleic acid target sequences \x97 qPCR and dPCR | |
| Bois pour la fabrication des parquets - Symboles pour marquage selon les esp\xe8ces | |
| Bouteilles \xe0 gaz \x97 Cadres de bouteilles \x97 Contr\xf4le p\xe9riodique et essais | |
| Broadcast Exchange Format (BXF) | |
| Broadcast Exchange Format \x97 Roadmap for the 2021 Document Suite | |
| Brown coals and lignites \x97 Determination of the volatile matter in the analysis sample: one furnace method | |
| Buy-Ship-Pay reference data model\x97 Part 1: Business requirements specification (BRS) | |
| C\xe9r\xe9ales et l\xe9gumineuses - D\xe9termination de la teneur en azote et calcul de la teneur en prot\xe9ines brutes - M\xe9thode de Kjeldahl | |
| C\xe9ramiques techniques - Propri\xe9t\xe9s m\xe9caniques des composites c\xe9ramiques \xe0 temp\xe9rature ambiante et \xe0 pression atmosph\xe9rique - D\xe9termination des propri\xe9t\xe9s en traction de tubes | |
| Cables for welding machines | |
| Cables of rated voltages up to and including 450/750 V and having cross-linked insulation - Part 14: Cords for applications requiring high flexibility | |
| Cables of rated voltages up to and including 450/750 V and having crosslinked insulation Part 14: Cords for applications requiring high flexibility | |
| Calculation of the current rating of cables - Cyclic rating factor for cables up to and including 18/30 (36) kV | |
| Caoutchoucs vulcanis\xe9s - Dosage du soufre libre par chromatographie en phase gazeuse (CG) et chromatographie en phase liquide haute performance (HPLC) | |
| Carbon footprint for seafood \x97 Product category rules (CFP-PCR) for macroalgae | |
| Carbonaceous materials used in the production of aluminium - Cold and tepid ramming pastes - Preparation of baked test pieces and determination of loss on baking | |
| Carbonaceous materials used in the production of aluminium Calcined coke Determination of crystallite size of calcined petroleum coke by X-ray diffraction | |
| Cavi - Misura delle scariche parziali | |
| Cavi isolati con polivinilcloruro con tensione nominale non superiore a 450/750 V - Parte 3: Cavi senza guaina per posa fissa | |
| Cavi per posa fissa nei circuiti interni degli impianti fissi di segnalamento e sicurezza ferroviari e simili | |
| Chaussures et composants de chaussure - M\xe9thode de test d'\xe9preuve quantitatif pour \xe9valuer l'activit\xe9 antifongique | |
| Coffee and coffee products \x97 Determination of the caffeine content using high performance liquid chromatography (HPLC) \x97 Reference method | |
| COMMISSION DELEGATED REGULATION supplementing Regulation (EU) 2017/1369 of the European Parliament and of the Council with regard to energy labelling of household dishwashers and repealing Commission Delegated Regulation (EU) No... | |
| COMMISSION REGULATION laying down ecodesign requirements for household dishwashers pursuant to Directive 2009/125/EC of the European Parliament and of the Council amending Commission Regulation (EC) No 1275/2008 and repealing Commission... | |
| Commissioning Process for Buildings and Systems | |
| Commissioning Process for New Buildings and New Systems | |
| Common test methods for cables under fire conditions - Test on gases evolved during combustion of materials from cables - Part 0: General requirements and scope | |
| Common test methods for cables under fire conditions - Tests on gases evolved during combustion of materials from cables - Part 4: Determination of toxicity index of gases evolved during... | |
| Common test methods for insulating and sheathing materials of electric cables - Part 0: Methods for general application - Section 1: Tests | |
| Common test methods for insulating and sheathing materials of electric cables Part 0: Methods for general application Section 1: Tests | |
| Connectors for power cables | |
| Corrigendum to Directive of the European Parliament and of the Council on the harmonisation of the laws of the Member States relating to the making available on the market of... | |
| Courroies transporteuses - Essais de frottement au tambour | |
| Cranes \x97 Proof of competence of steel structures | |
| Cross-border trade of second-hand goods | |
| Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing TECHNICAL CORRIGENDUM 1 | |
| Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 1: Design, fabrication, inspection and testing | |
| Cryogenic vessels \x97 Large transportable vacuum-insulated vessels \x97 Part 1: Design, fabrication, inspection and testing AMENDMENT 1 | |
| Cuir - Essais de solidit\xe9 des coloris - Solidit\xe9 des coloris au d\xe9gorgement par frottement | |
| DC Microgrids for Rural and Remote Electricity Access Applications | |
| Dentistry - Materials Used for Dental Equipment Surfaces \x96 Determination of Resistance to Chemical Disinfectants | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2020 on the quality of water intended for human consumption (recast) | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on public procurement and repealing Directive 2004/18/EC | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to electromagnetic compatibility (recast) | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to equipment and protective systems intended for use in potentially... | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to lifts and safety components for lifts (recast) | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment... | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment... | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment... | |
| DIRECTIVE OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the harmonisation of the laws of the Member States relating to the making available on the market of simple pressure... | |
| Dispositifs m\xe9dicaux \x97 Informations \xe0 fournir par le fabricant | |
| Distributed Energy Resources Management Systems (DERMS) Functional Specification | |
| Distribution cables of rated voltage 0,6/1 kV - Part 1: General requirements Part 7: EPR insulated cables - unarmoured | |
| Draft BS EN 1001 Durability of wood and wood-based products - Terminology | |
| Draft BS EN 12004-1 Adhesives for ceramic tiles. Part 1: Essential characteristics and AVCP | |
| Draft BS EN 12094-8 Fixed firefighting systems - Components for gas extinguishing systems. Part 8: Requirements and test methods for connectors | |
| Draft BS EN 12427 Industrial, commercial and garage doors and gates - Air permeability - Test method | |
| Draft BS EN 12444 Industrial, commercial and garage doors and gates - Resistance to wind load - Testing and calculation | |
| Draft BS EN 12489 Industrial, commercial and garage doors and gates - Resistance to water penetration - Test method | |
| Draft BS EN 12697-38:2020 Bituminous mixtures - Test methods Part 38: Common equipment and calibration | |
| Draft BS EN 13000 Cranes - Mobile cranes | |
| Draft BS EN 13035-1 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements. Part 1: Storage, handling and transportation equipment inside the factory | |
| Draft BS EN 13035-2 Machines and plants for the manufacture, treatment and processing of flat glass - Safety requirements. Part 2: Storage, handling and transportation equipment outside the factory | |
| Draft BS EN 131-8 Ladders. Part 8: Ladders with separate platform | |
| Draft BS EN 13224-1 Precast concrete products - Ribbed floor elements. Part 1: Essential characteristics | |
| Draft BS EN 13224-2 Precast concrete products - Ribbed floor elements. Part 2: Specifications | |
| Draft BS EN 13241 Industrial, commercial, garage doors and gates - Product standard, performance characteristics | |
| Draft BS EN 14023 Bitumen and bituminous binders - Specification framework for polymer modified bitumens | |
| Draft BS EN 14891 Liquid applied water impermeable products for use beneath ceramic tiling bonded with adhesives - Essential characteristics and AVCP | |
| Draft BS EN 14963-1 Prefabricated accessories for roofing. Part 1: Continuous plastic rooflights - Product specification and test methods | |
| Draft BS EN 15028 Chemicals used for treatment of water intended for human consumption - Sodium chlorate | |
| Draft BS EN 15030 Chemicals used for treatment of water intended for human consumption - Silver salts for intermittent use | |
| Draft BS EN 15072 Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , anhydrous | |
| Draft BS EN 15073 Chemicals used for treatment of swimming pool water - Sodium dichloroisocyanurate , dihydrate | |
| Draft BS EN 15075 Chemicals used for treatment of swimming pool water - Sodium hydrogen carbonate | |
| Draft BS EN 15076 Chemicals used for treatment of swimming pool water - Sodium hydroxide | |
| Draft BS EN 15077 Chemicals used for treatment of swimming pool water - Sodium hypochlorite | |
| Draft BS EN 15078 Chemicals used for treatment of swimming pool water - Sulfuric acid | |
| Draft BS EN 15482 Chemicals used for treatment of water intended for human consumption - Sodium permanganate | |
| Draft BS EN 15620 Steel static storage systems - Tolerances, deformations and clearances | |
| Draft BS EN 15650 Ventilation for buildings - Fire dampers | |
| Draft BS EN 15955 Railway applications - Infrastructure - Demountable machines, trailers and associated equipment - General safety and technical requirements for travelling and working | |
| Draft BS EN 16604-30-01 Space - Space Situational Awareness Monitoring. Part 01: Glossary of Near Earth objects and space surveillance and tracking terms | |
| Draft BS EN 17392-1 Sustainability of construction works - Environmental product declarations - Core rules for road materials. Part 1: Bituminous mixtures | |
| Draft BS EN 17473 Building information modelling (BIM) - Data templates for construction objects used in the life cycle of any built asset - Data templates based on harmonised technical... | |
| Draft BS EN 17537 Food processing machinery - Tenderizing machines - Safety and hygiene requirements | |
| Draft BS EN 17600 Paper and board intended to come into contact with foodstuffs - Determination of the fastness of fluorescent whitened paper and board - Analysis by high-performance liquid... | |
| Draft BS EN 17625 Roof-top units | |
| Draft BS EN 1873-1 Prefabricated accessories for roofing - Individual plastic rooflights - Product specification and test methods | |
| Draft BS EN 4496 Aerospace series - Screw, 100\xb0 countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating -... | |
| Draft BS EN 4709-003 Aerospace series - Unmanned Aircraft Systems. Part 003: Geo-awareness requirements | |
| Draft BS EN 4709-004 Aerospace series - Unmanned Aircraft Systems. Part 004: Lighting requirements | |
| Draft BS EN 4860 Aerospace series - Environmental testing - Test Xb: Abrasion of markings, letterings, surfaces and materials caused by rubbing fingertips and hands | |
| Draft BS EN 50117-9-1 Coaxial cables. Part 9-1: Sectional specification for coaxial cables for analogue and digital signal transmission - Indoor drop cables for systems operating at 5 MHz -... | |
| Draft BS EN 50288-12-2 Multi-element metallic cables used in analogue and digital communication and control. Part 12-2: Sectional specification for screened cables characterised from 1 MHz up to 2000 MHz... | |
| Draft BS EN 50288-13-1 Multi-element metallic cables used in analogue and digital communication and control. Part 13-1: Sectional specification for outer screened cables characterised up to 2000 MHz - Horizontal... | |
| Draft BS EN 50288-13-2 Multi-element metallic cables used in analogue and digital communication and control. Part 13-2: Sectional specification for outer screened cables characterised from 1 MHz up to 2000... | |
| Draft BS EN 50288-7 Multi-element metallic cables used in analogue and digital communication and control. Part 7: Sectional specification for instrumentation and control cables. | |
| Draft BS EN 50377-15-1 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications. Part 15-1: Type MPO with 12 fibre PPS ferrules terminated... | |
| Draft BS EN 534 Corrugated bitumen sheets - Product specification and test methods | |
| Draft BS EN 544 Bitumen shingles with mineral and/or synthetic reinforcements - Product specification and test methods | |
| Draft BS EN 746-1 Industrial thermoprocessing equipment. Part 1: Common safety requirements for industrial thermoprocessing equipment | |
| Draft BS EN 746-11 Industrial thermoprocessing equipment. Part 11: Safety requirements for protective systems | |
| Draft BS EN 746-2 Industrial thermoprocessing equipment. Part 2: Safety requirements for combustion and fuel handling systems | |
| Draft BS EN 896 Chemicals used for treatment of water intended for human consumption - Sodium hydroxide | |
| Draft BS EN 897 Chemicals used for treatment of water intended for human consumption - Sodium carbonate | |
| Draft BS EN 898 Chemicals used for treatment of water intended for human consumption - Sodium hydrogen carbonate | |
| Draft BS EN IEC 80001-5-1 Safety, security and effectiveness in the implementation and use of connected medical devices or connected health software. Part 5-1: Security - Activities in the product... | |
| Draft BS ISO/IEC 11801-1 Amendment 1 - Information technology - Generic cabling for customer premises Part 1: General requirements | |
| Dried parsley (Petroselinum crispum) - Specification | |
| Earth-moving machinery \x97 Safety \x97 Part 15: Requirements for compact tool carriers | |
| Earth-moving machinery \x97 Safety \x97 Part 1: General requirements | |
| Earth-moving machinery \x97 Safety \x97 Part 2: Requirements for tractor-dozers | |
| Earth-moving machinery \x97 Safety \x97 Part 5: Requirements for hydraulic excavators | |
| Earth-moving machinery \x97 Safety \x97 Part 7: Requirements for scrapers | |
| Electric cables - Calculation of the current rating - Part 1-1: Current rating equations (100 % load factor) and calculation of losses - General | |
| Electric cables - Calculation of the current rating - Part 1-2: Current rating equations (100% load factor) and calculation of losses - Sheath eddy current loss factors for two circuits... | |
| Electric cables - Calculation of the current rating - Part 1-3: Current rating equations (100 % load factor) and calculation of losses - Current sharing between parallel singlecore cables and... | |
| Electric cables - Calculation of the current rating - Part 2-1: Thermal resistance - Calculation of thermal resistance | |
| Electric cables - Calculation of the current rating - Part 2-2: Thermal resistance - Section Two: A method for calculating reduction factors for groups of cables in free air, protected... | |
| Electric cables - Calculation of the current rating - Part 3-1: Sections on operating conditions - Reference operating conditions and selection of cable type | |
| Electric cables - Calculation of the current rating - Part 3-2: Sections on operating conditions - Economic optimization of power cable size | |
| Electric cables - Calculation of the current rating - Part 3-3: Sections on operating conditions - Cables crossing external heat sources | |
| Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) \x96 Part 1: General guidance | |
| Electric cables. Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) \x96 Part 2: Specific guidance to EN 50525 cable types | |
| Electricity Access Requirements with Safety Extra-Low Voltage Direct Current for Tier 2 and Tier 3 of the Energy Sector Management Assistance Program (ESMAP) Multi-Tier Framework for Household Electricity Supply | |
| Emaux vitrifi\xe9s - Pr\xe9paration d\x92\xe9chantillons d\x92\xe9mail et d\xe9termination du coefficient de dilatation thermique | |
| Emballage des balles en caoutchouc - Partie 1: Caoutchouc butadi\xe8ne (BR) et caoutchouc styr\xe8ne-butadi\xe 8ne (SBR) | |
| Emballage des balles en caoutchouc - Partie 2: Caoutchouc naturel | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 10: Exigences applicables aux trancheuses | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 11: Exigences applicables aux compacteurs de remblais et de d\xe9chets | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 12: Exigences applicables aux pelles \xe0 c\xe2ble | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 13: Exigences applicables aux compacteurs | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 3: Exigences applicables aux chargeuses | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 4: Exigences applicables aux chargeusespelleteuse s | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 8: Exigences applicables aux niveleuses | |
| Engins de terrassement - S\xe9curit\xe9 - Partie 9: Exigences applicables aux tracteurs poseurs de canalisations | |
| Engins de terrassement \x97 S\xe9curit\xe9 \x97 Partie 6: Exigences applicables aux tombereaux | |
| Essais non destructifs - Appareillage pour examen par courants de Foucault - Caract\xe9ristiques des capteurs multi\xe9l\xe9ments et v\xe9rifications | |
| Essais non destructifs - Contr\xf4le d'\xe9tanch\xe9it\xe 9 - M\xe9thode par gaz traceur | |
| Essais non-destructifs - Contr\xf4le d\x92\xe9tanch\xe9it \xe9 - Vocabulaire | |
| Esters m\xe9thyliques d'acides gras \x97 D\xe9termination de la teneur en soufre \x97 M\xe9thode par spectroscopie d\x92\xe9mission optique par plasma \xe0 couplage inductif (ICP-OES) | |
| Facilit\xe9 d'emploi des produits quotidiens - Partie 1: Exigences de conception pour le contexte d'utilisation et pour les caract\xe9ristiques de l'utilisateur | |
| Facility Smart Grid Information Model Errata | |
| Fermeture et remise en \xe9tat des mines \x97 Vocabulaire | |
| Fibre-reinforced plastic composites - Shear test method using a shear frame for the determination of the in-plane shear stress/shear strain response and shear modulus | |
| Fibre-reinforced plastic composites \x97 Standard qualification plan (SQP) for composite materials, including reduced qualification plan (RQP) and extended qualification plan (EQP) schemes | |
| Film for wrapping rubber bales - Part 3: Ethylene-propylene-d iene rubber (EPDM), acrylonitrile-butadi ene rubber (NBR), hydrogenated nitrile-butadiene rubber (HNBR), acrylic-ethylene rubber (AEM) and acrylic rubber (ACM) | |
| Film for wrapping rubber bales \x97 Part 1: Butadiene rubber (BR) and styrene-butadiene rubber (SBR) TECHNICAL CORRIGENDUM 1 | |
| Fils \xe9lectriques r\xe9sistant aux temp\xe9ratures \xe9lev\xe9es pour \xe9quipements mont\xe9s \xe0 bord des a\xe9ronefs | |
| Financial services - Entity legal forms (ELF) | |
| Fine bubble technology - General principles for usage and measurement of fine bubbles - Part 1: Terminology | |
| Fine bubble technology - General principles for usage and measurement of fine bubbles - Part 2: Categorization of the attributes of fine bubbles | |
| Fine bubble technology - Sampling and sample preparation for measurement - Part 1: Ultrafine bubble dispersion in water | |
| Fine bubble technology \x97 General principles for usage and measurement of fine bubbles \x97 Part 1: Terminology AMENDMENT 1 | |
| Fine bubble technology \x97 General principles for usage and measurement of fine bubbles \x97 Part 3: Methods for generating fine bubbles | |
| Fine bubble technology \x97 General principles for usage and measurement of fine bubbles \x97 Part 4: Terminology related to microbubble beds | |
| Fine bubble technology \x97 General principles for usage and measurement of fine bubbles \x97 Part 5: Shelled bubble vocabulary | |
| Fine bubble technology \x97 Water treatment applications \x97 Part 1: Test method for evaluating ozone fine bubble water generating systems by the decolorization of methylene blue | |
| Fine bubble technology \x97 Water treatment applications \x97 Part 2: Test methods using Escherichia coli as a test micro-organism | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Absolute measurement of internal quantum efficiency of phosphors for white light emitting diodes using an integrating sphere | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Measurement of thixotropic behaviour of ceramic slurry by use of a rotational viscometer | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for determining elastic modulus of thick ceramic coatings at elevated temperature | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for interfacial tensile and shear fatigue properties of ceramic joining loaded in constant amplitude at room temperature | |
| Fine-Pitch On-Center Face Gears for 20-Degree Involute Spur Pinions | |
| Fire retardant cables with low emission of smokes and toxic and corrosive gases - Part 2 - Rated voltage Uo/U above 0,6/1 kV | |
| Fire retardant elastomeric insulated cables, halogen free (LSOH) with rated voltage U0/U 0,6/1 kV | |
| Gear Tooth Flank Tolerance Classification System \x96 Definitions and Allowable Values of Double Flank Radial Composite Deviations | |
| Granul\xe9s crus de li\xe8ge - Analyse granulom\xe9trique par tamisage m\xe9canique | |
| Granul\xe9s crus de li\xe8ge - D\xe9termination de la masse volumique | |
| Graphic technology - Quantification and communication for calculating the carbon footprint of e-media | |
| Guidance for performance grading of recovered reverse osmosis (RO) membranes for water reuse | |
| Guide for Control and Automation Installations Applied to the Electric Power Infrastructure | |
| Guide for Design, Operation, and Maintenance of Battery Energy Storage Systems, both Stationary and Mobile, and Applications Integrated with Electric Power Systems | |
| Guide for Designing a Time Synchronization System for Power Substations | |
| Guide for Electric Transportation Fast Charging Station Management System Functional Specification | |
| Guide for Smart Grid Interoperability of Energy Technology and Information Technology Operation with the Electric Power System (EPS), End-Use Applications, and Loads | |
| Guide for the Benefit Evaluation of Electric Power Grid Customer Demand Response | |
| Guide for the Design of Microgrid Protection Systems | |
| Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure | |
| Guide to use for railway rolling stock cables | |
| Guide to use of low voltage cables | |
| Guide to use of low voltage harmonized cables | |
| Guide to use of the low voltage cables | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems - Part 1: General | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems \x97 Part 2: Methodology to evaluate performance of treatment systems on the basis of greenhouse gas emissions | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems \x97 Part 3: Ozone treatment technology | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems \x97 Part 4: UV Disinfection | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems \x97 Part 5: Membrane filtration | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems \x97 Part 6: Ion exchange and electrodialysis | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems \x97 Part 7: Advanced oxidation processes technology | |
| Guidelines for performance evaluation of treatment technologies for water reuse systems \x97 Part 8: Evaluation of treatment systems based on life cycle cost | |
| Guidelines for water quality grade classification for water reuse | |
| Habillement de protection destin\xe9 \xe0 la pratique du surf des neiges \x97 Protecteurs de poignets \x97 Exigences et m\xe9thodes d\x92essai | |
| Health informatics Health cards General characteristics | |
| Health informatics Health cards Numbering system and registration procedure for issuer identifiers | |
| Heat treatment \x97 Control of quality | |
| Host and Router Profiles for IPv6 | |
| IEEE Recommended Practice for the Planning and Design of the Microgrid | |
| Implants chirurgicaux - Mat\xe9riaux m\xe9talliques - Classification des microstructures des barres en alliages de titane alpha+b\xeata | |
| Industrial automation systems and integration \x97 Service interface for testing applications \x97 Part 2: Resource management service interface | |
| Industrial automation systems and integration \x97 Service interface for testing applications \x97 Part 3: Virtual device service interface | |
| Industrial automation systems and integration \x97 Service interface for testing applications \x97 Part 4: Device capability profile template | |
| Industrial automation systems and integration \x97 Service interface for testing applications \x97 Part 5: Application program service interface | |
| Industrial automation systems and integration Service interface for testing applications Part 1: Overview | |
| Industrial trucks - Lorry-mounted trucks - Part 1: Safety requirements and verification | |
| Industrial trucks \x97 Lorry-mounted trucks \x97 Part 2: Safe use requirements | |
| Industries du p\xe9trole et du gaz naturel - Conception et limites de fonctionnement des rames \xe0 composants en alliage d'aluminium | |
| Inflatable play equipment - Safety requirements and test methods | |
| Inflatable play equipment \x97 Part 1: Safety requirements and test methods | |
| Inflatable play equipment \x97 Part 2: Additional safety requirements for inflatable bouncing pillows intended for permanent installation | |
| Inflatable play equipment \x97 Part 3: Additional safety requirements and test methods for snappies | |
| Information and documentation - International library item identifier(ILII) | |
| Ing\xe9nierie de la s\xe9curit\xe9 incendie \x97 Protocole de v\xe9rification et de validation de mod\xe8les d'\xe9vacuation dans un b\xe2timent en cas d'incendie | |
| Installation and equipment for liquefied natural gas \x97 Design of floating LNG installations \x97 Part 1: General requirements | |
| Installation and equipment for liquefied natural gas \x97 Design of floating LNG installations \x97 Part 2: Specific FSRU issues | |
| INSTRUCTORS FIRST AID GUIDE FOR CLASS TRAINING | |
| Interoperability of Internet Protocol Security (IPsec) Utilized within Utility Control Systems | |
| Iron and Manganese Removal Handbook | |
| Joints and terminals for cables with voltage Uo/U not exceeding 600/1000 V a.c. and 750 V d.c. | |
| Joints and terminals for power cables | |
| Latex concentr\xe9 de caoutchouc naturel \xe9vapor\xe9, pr\xe9serv\xe9 - Sp\xe9cifications | |
| Latex de caoutchouc synth\xe9tique - Pr\xe9paration du polym\xe8re sec | |
| Lignes directrices pour l'appr\xe9ciation et la gestion du risque pour la sant\xe9 relative \xe0 la r\xe9utilisation de l'eau pour des usages non potables | |
| Lined Industrial Rubber Boots with General Purpose Oil Resistance | |
| Machines pour les mati\xe8res plastiques et le caoutchouc \x97 Machines de moulage par injection \x97 Prescription de s\xe9curit\xe9 | |
| Magnesium and magnesium alloys - Determination of mercury | |
| Magnesium lithium alloys - Determination of lithium - Inductively coupled plasma optical emission spectrometric method | |
| Maintenance Management for Water Utilities | |
| Mat\xe9riaux m\xe9talliques - T\xf4les et bandes - Essai d\x92emboutissage Erichsen | |
| Mat\xe9riaux utilis\xe9s pour la fabrication des enveloppes pour les filtres de cigarette, pour les cigarettes et pour les autres produits du tabac - Dosage de l'ac\xe9tate | |
| Mat\xe9riaux utilis\xe9s pour la fabrication des enveloppes pour les filtres de cigarette, pour les cigarettes et pour les autres produits du tabac - Dosage du citrate | |
| Materials for the production of primary aluminium - Dense refractory bricks - Determination of cryolite resistance | |
| Measurement of fluid flow in closed conduits - Guidance for the use of electromagnetic flowmeters for conductive liquids | |
| Method of Test for Rating Micro Combined Heat and Power Devices | |
| Microbeam analysis - Analytical electron microscopy - Method for the determination of interface position in the cross-sectional image of the layered materials | |
| Molecular in vitro diagnostic examinations \x97 Specifications for preexamination processes for formalin-fixed and paraffin-embedded (FFPE) tissue \x97 Part 4: In situ detection techniques | |
| Motion-Pictures - Dubbing Theaters, Review Rooms, and Indoor Theaters - B-Chain Electroacoustic Response | |
| Multiple-Use Plastic Materials | |
| National Annex to EN 50565-1 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) Part 1: General guidance | |
| National Annex to EN 50565-2 Electric cables - Guide to use for cables with a rated voltage not exceeding 450/750 V (U0/U) Part 2: Specific guidance to EN 50525 cable... | |
| Natural rubber latex cleanroom gloves - Specification | |
| Nuclear Safety Design Criteria and Functional Performance Requirements for Liquid-Fuel Molten Salt Reactor Nuclear Power Plants | |
| Numbering of weeks | |
| Optique et photonique - Bandes spectrales | |
| Oxygen reduction systems for fire prevention \x97 Design, installation, planning and maintenance | |
| Paper-insulated cables for electrical systems with rated voltages between 1 kV and 45 kV | |
| Peintures et vernis - Exigences de performance relatives aux syst\xe8mes de peinture pour la protection des structures offshore et structures associ\xe9es | |
| Peintures et vernis \x97 D\xe9termination de la nettet\xe9 de l'image (degr\xe9 de nettet\xe9 de l'image r\xe9fl\xe9chie ou transmise) | |
| Performance evaluation of treatment technologies for water reuse systems \x97 Part 9: Guidelines and requirements for electro-chlorination | |
| Personal protective equipment \x97 Occupational footwear TECHNICAL CORRIGENDUM 1 | |
| Personal protective equipment \x97 Occupational footwear TECHNICAL CORRIGENDUM 2 | |
| Personal protective equipment \x97 Protective footwear TECHNICAL CORRIGENDUM 1 | |
| Personal protective equipment \x97 Protective footwear TECHNICAL CORRIGENDUM 2 | |
| Personal protective equipment \x97 Safety footwear AMENDMENT 1 | |
| Personal protective equipment \x97 Safety footwear TECHNICAL CORRIGENDUM 1 | |
| Personal protective equipment \x97 Safety footwear TECHNICAL CORRIGENDUM 2 | |
| Personal protective equipment \x97 Test methods for footwear AMENDMENT 1 | |
| Personal protective equipment \x97 Test methods for footwear TECHNICAL CORRIGENDUM 1 | |
| Petroleum, petrochemical and natural gas industries \x97 Safety of machineries \x97 Powered elevators | |
| Photography - Psychophysical experimental methods for estimating image quality - Part 1: Overview of psychophysical elements | |
| Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method | |
| Photography - Psychophysical experimental methods for estimating image quality - Part 3: Quality ruler method | |
| Photography \x97 Psychophysical experimental methods for estimating image quality \x97 Part 2: Triplet comparison method TECHNICAL CORRIGENDUM 1 | |
| Pigments \xe0 base de chromate de strontium pour peintures | |
| Pigments and extenders \x97 Dispersion procedure for sedimentation-based particle sizing of suspended pigment or extender with liquid sedimentation methods | |
| Piscines publiques - Syst\xe8mes de vision par ordinateur pour la d\xe9tection de noyades en piscines - Exigences de s\xe9curit\xe9 et m\xe9thodes d'essai | |
| Plastics - Epoxy resins - Determination of degree of crosslinking of crosslinked epoxy resins by Fourier Transform Infrared (FTIR) Spectroscopy | |
| Plastics \x97 Determination of abrasive wear by reciprocating linear sliding motion | |
| Plastics moulded parts - Tolerances and acceptance conditions | |
| Plastiques - D\xe9termination de la duret\xe9 - Partie 1: M\xe9thode de p\xe9n\xe9tration \xe0 la bille | |
| Plastiques - D\xe9termination de la duret\xe9 - Partie 2: Duret\xe9 Rockwell | |
| Plastiques - D\xe9termination du degr\xe9 de d\xe9sint\xe9gration de mat\xe9riaux plastiques dans des conditions de compostage simul\xe9es lors d'un essai de laboratoire | |
| Plates-formes \xe9l\xe9vatrices mobiles de personnel - Symboles pour les commandes de l'op\xe9rateur et autres indicateurs | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 3: Non-sheathed cables for fixed wiring | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 4: Sheathed cables for fixed wiring | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 5: Flexible cables (cords) | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 8: Single core non-sheathed cables for decorative chains | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non sheathed cable for installation at low temperatures | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 9: Single core non-sheathed cable for installation at low temperatures | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 4: Sheathed cables for fixed wiring | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 5: Flexible cables (cords) | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 8: Single core non-sheathed cables for decorative chains | |
| Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V Part 9: Single core non-sheathed cable for installation at low temperatures | |
| Pompes et groupes motopompes pour liquides - Code d'essai acoustique - Classes de pr\xe9cision 2 et 3 | |
| Porte-mines et mines pour usage g\xe9n\xe9ral - Classification, dimensions, qualit\xe9 et m\xe9thodes d'essai - Partie 2: Mines graphite pour porte-mines | |
| Porte-mines et mines pour usage g\xe9n\xe9ral \x97 Classification, dimensions, qualit\xe9 et m\xe9thodes d'essai \x97 Partie 1: Porte-mines | |
| Power cables, rubber insulated (G18), thermoplastic or elastomeric sheath, with special requirements of reaction to fire performance according to the Construction Products Regulation (CPR) Cables with additional fire resistance characteristics. | |
| Power cables, thermoplastic (PVC) insulated, with or without special requirements of reaction to fire performance according to the Construction Products Regulation (CPR) - AC rated voltages U0/U 0,6/1 kV and... | |
| Pr\xe9paration d'\xe9prouvettes r\xe9fractaires - Panneaux r\xe9fractaires pour gunitage au pistolet m\xe9langeur pneumatique | |
| Premi\xe8re \xe9dition | |
| Proceso de Comisionado para Edificios y Systemas | |
| Produits consommables pour le soudage - Baguettes pour le soudage aux gaz des aciers non alli\xe9s et des aciers r\xe9sistant au fluage - Classification | |
| PVC insulated cables with rated voltages between 1 kV and 3 kV | |
| Qualit\xe9 de l'eau - D\xe9termination des effets d'inhibition sur la croissance de la lentille d'eau Spirodela polyrhiza par les eaux us\xe9es, les eaux naturelles et les produits chimiques - M\xe9thode... | |
| Qualit\xe9 du sol - Dosage de l'arsenic, de l'antimoine et du s\xe9l\xe9nium dans des extraits du sol \xe0 l'eau r\xe9gale par spectrom\xe9trie d'absorption atomique avec atomisation \xe9lectrothermique ou g\xe9n\xe9ration d'hydrures... | |
| Qualit\xe9 du sol - M\xe9thode de diagnostic applicable \xe0 la teneur en eau - D\xe9termination par r\xe9fractom\xe9trie | |
| R\xe9cipients cryog\xe9niques - Grands r\xe9cipients transportables, isol\xe9s, sous vide - Partie 2: Exigences de fonctionnement | |
| Raccords \xe0 braser par capillarit\xe9 pour tubes en cuivre - Dimensions d'assemblage et essais | |
| Railway applications - Railway rolling stock cables having special fire performance - Standard wall Part 1: General requirements | |
| Railway applications. Railway rolling stock cable having special fire performance - Standard wall Part 2: Single core cables | |
| Railway applications. Railway rolling stock cable having special fire performance - Standard wall Part 3: Multicore cables | |
| Railways rolling stocks fire retardant cables with low emission of smokes and toxic corrosive gases, rubber insulated | |
| Recommended Practice for Implementing an IEC 61850-Based Substation Communications, Protection, Monitoring, and Control System | |
| Recommended Practice for Preparation of Outline Drawings of Electron Tubes and Bases | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on in vitro diagnostic medical devices and repealing Directive 98/79/EC and Commission Decision 2010/227/EU | |
| REGULATION OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on personal protective equipment and repealing Council Directive 89/686/EEC | |
| REGULATIONS OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the protection of natural persons with regard to the processing of personal data and on the free movement of such... | |
| Resistance welding - Locking tapers for electrode holders and electrode caps | |
| Rev\xeatements de sol r\xe9silients - Sp\xe9cifications des panneaux de plancher/assemblages pour pose flottante | |
| Rev\xeatements de sol r\xe9silients \x97 Sp\xe9cifications des panneaux de plancher/assemblages pour pose flottante AMENDEMENT 1: Exigences en fonction du support | |
| Rev\xeatements de sol textiles - Essai d\x92imperm\xe9abili t\xe9 \xe0 l\x92eau | |
| Rev\xeatements de sol textiles - Essai de r\xe9sistance \xe0 la lame - Rev\xeatement de sol textile \xe0 velours floqu\xe9 | |
| Road vehicles - H-point machine (HPM II) - Specifications and procedure for H-point determination | |
| ROOF COVERINGS AND ROOF DECK CONSTRUCTIONS | |
| Rotodynamic (Centrifugal and Vertical) Pump - Efficiency Prediction | |
| Rubber Footwear - Lined Industrial Vulcanized-Rubber Boots - Specification | |
| Rubber insulated cables halogen free fire retardant - Rated voltage U0/U not exceeding 0,6/1 kV | |
| Sch\xe9mas des circuits \xe9lectriques \xe0 bord des a\xe9ronefs | |
| Services d'interpr\xe9tation - Interpr\xe9tation juridique et judiciaire - Exigences | |
| Ships and marine technology - Cathodic protection of ships | |
| Ships and marine technology - Guidelines on vibration isolation design methods for shipboard auxiliary machinery | |
| Ships and marine technology - Model test method for propeller cavitation noise evaluation in ship design - Part 1: Source level estimation | |
| Ships and marine technology - Offshore mooring chains | |
| Ships and marine technology - Test method of flow induced in-pipe noise source characteristics for a shipused pump | |
| Ships and marine technology \x97 Model test method for propeller cavitation noise evaluation in ship design \x97 Part 2: Noise source localization | |
| Single Sockets for Unplasticized Poly(Vinyl Chloride) (PVC-U) and Chlorinated Poly(Vinyl Chloride) (PVC-C) Pressure Pipes with Elastic Sealing Ring Type Joints - Minimum Depths of Engagement | |
| Soil quality - Determination of perchlorate in soil using ion chromatography | |
| Soil quality Extraction of thallium and determination by electrothermal atomic absorption spectrometry | |
| Solid mineral fuels - Determination of total sulfur by Coulomb titration method | |
| Sp\xe9cification g\xe9om\xe9trique des produits (GPS) \x97 D\xe9composition des caract\xe9ristiques g\xe9om\xe9triques pour la ma\xeetrise de la fabrication | |
| Space data and information transfer systems - CCSDS cryptographic algorithms | |
| Space data and information transfer systems - CCSDS Space Link Protocols over ETSI DVB-S2 Standard | |
| Space data and information transfer systems - Delta-DOR Raw Data Exchange Format | |
| Space data and information transfer systems - IP over CCSDS space links | |
| Space data and information transfer systems - Mission Operations Message Abstraction Layer - JAVA API | |
| Space data and information transfer systems - Security architecture for space data systems | |
| Space data and information transfer systems - Spacecraft Onboard Interface Services - Device Access Service | |
| Space data and information transfer systems - Spacecraft onboard interface services - Device data pooling service | |
| Space data and information transfer systems - Spacecraft onboard interface services - File and packet store services | |
| Space data and information transfer systems - Spacecraft onboard interface services - Message transfer service | |
| Space data and information transfer systems - Spacecraft Onboard Interface Systems - Low Data - Rate Wireless Communications for Spacecraft Monitoring and Control | |
| Space systems - Product assurance requirements for commercial satellites | |
| Standard Technical Specifications of a DC Quick Charger for Use with Electric Vehicles | |
| Stationary source emissions \x97 Determination of the mass concentration of individual volatile organic compounds (VOCs) in waste gases from non-combustion processes | |
| Stationary source emissions \x97 Quality assurance of automated measuring systems | |
| Surface chemical analysis - Secondary ion mass spectrometry - Correction method for saturated intensity in single ion counting dynamic secondary ion mass spectrometry | |
| Surface chemical analysis - Total reflection X-ray fluorescence analysis of water | |
| Surface chemical analysis Secondary-ion mass spectrometry Method for estimating depth resolution parameters with multiple delta-layer reference materials | |
| System for cable designation | |
| Tabac et produits du tabac - D\xe9termination de la largeur des brins de tabac hach\xe9 | |
| Technique du vide - Manom\xe8tres \xe0 vide - Sp\xe9cifications, \xe9talonnage et incertitudes de mesure des manom\xe8tres capacitifs \xe0 membrane | |
| Test on electric cables under fire conditions - Part 0: Test of no propagation of fire - General principles | |
| Test Procedures for Electric Energy Storage Equipment and Systems for Electric Power Systems Applications | |
| Tests for electric cables under fire conditions - Circuits integrity | |
| Tests on cables under fire condition - Part 2: Test on not propagation of fire | |
| Tests on cables under fire condition Part 2: Test on not propagation of fire | |
| Tests on electric and optical fibre cables under fire conditions Part 0: Test for vertical flame spread of vertically-mounted bunched wires or cables - General principles | |
| Tests on electric cables under fire conditions - Part 4: Method of measurement of oxygen index for non metallic components | |
| Tests on electric cables under fire conditions - Part 5: Method of measurement of temperature index for non metallic components | |
| Tests on electric cables under fire conditions Part 4: Method of measurement of oxygen index for non metallic components | |
| Tests on electric cables under fire conditions Part 5: Method of measurement of temperature index for non metallic components | |
| Tests on gases evolved during combustion of electric cables and their compounds - Part 6: Measurement of smoke density of materials taken from electric cables burning under defined conditions. 300... | |
| Tests on gases evolved during combustion of electric cables and their compounds Part 6: Measurement of smoke density of materials taken from electric cables burning under defined conditions - 300... | |
| Textiles - Analyse prot\xe9omique qualitative et quantitative de certaines fibres animales - Partie 1: D\xe9tection des peptides par LC-ESI-MS avec r\xe9duction prot\xe9ique | |
| Textiles - Analyse prot\xe9omique qualitative et quantitative de certaines fibres animales - Partie 2: D\xe9tection des peptides par MALDI-TOF MS | |
| Textiles - D\xe9termination du temps d'absorption d'eau et de la capacit\xe9 d'absorption d'eau des \xe9toffes | |
| Textiles \x97 Analyse prot\xe9omique qualitative et quantitative de certaines fibres animales \x97 Partie 3: D\xe9tection des peptides par LC-MS sans r\xe9duction prot\xe9ique | |
| THE 2017 FIDIC CONTRACTS | |
| The Specification of Microgrid Controllers | |
| The Testing of Microgrid Controllers | |
| Thermal insulation for building equipment and industrial installations - Aluminosilicate wool products - Specification | |
| Thermal spraying - Determination of interfacial toughness of ceramic coatings by indentation | |
| Thermal-insulating materials - Determination of long-term water absorption by diffusion | |
| Thermal-insulating materials \x97 Determination of compressive creep | |
| Thermal-insulating materials \x97 Determination of freeze-thaw resistance | |
| Timber structures - Bond performance of adhesives - Part 2: Additional requirements | |
| Timber structures \x97 Bond performance of adhesives \x97 Part 1: Basic requirements | |
| Tobacco and tobacco products \x97 Determination of the width of the strands of cut tobacco AMENDMENT 1 | |
| Tourisme et services connexes - Location de bateaux sans \xe9quipage - Exigences minimales de service et d'\xe9quipement | |
| Tracteurs et mat\xe9riels agricoles et forestiers - Signe d'identification de la vitesse (SIV) | |
| Traditional Chinese medicine - Coding rules for Chinese medicines in supply chain management | |
| Traditional Chinese medicine - Coding system of formulae | |
| Traditional Chinese medicine - Gua Sha instruments | |
| Traditional Chinese medicine - Panax notoginseng root and rhizome | |
| Traditional Chinese medicine - Panax notoginseng seeds and seedlings | |
| Traditional Chinese medicine - Salvia miltiorrhiza seeds and seedlings | |
| Traitement de l\x92information - Codage des jeux de caract\xe8res pour reconnaissance automatis\xe9e (MICR et ROC) | |
| Traitement de l\x92information - Repr\xe9sentation graphique des caract\xe8res de commande du jeu de caract\xe8res cod\xe9s \xe0 7 \xe9l\xe9ments | |
| Transmissions pneumatiques - Distributeurs de commande directionnels - Sp\xe9cification de l'affectation des broches des connecteurs \xe9lectriques ronds de diam\xe8tres 8 mm et 12 mm RECTIFICATIF TECHNIQUE 1 | |
| Transmissions pneumatiques - Distributeurs de commande directionnels - Sp\xe9cification de l'affectation des broches des connecteurs \xe9lectriques ronds de diam\xe8tres 8 mm et 12 mm | |
| Transmissions pneumatiques \x97 M\xe9thodes d'essai de mesure du niveau de pression d'\xe9mission acoustique des silencieux d'\xe9chappement | |
| Treated wastewater reuse for irrigation - Guidelines for the adaptation of irrigation systems and practices to treated wastewater | |
| Trusted mobile e-document framework \x97 Requirements, functionality and criteria for ensuring reliable and safe mobile e-business | |
| Tubes en acier inoxydable pour l\x92industrie alimentaire | |
| UL Standard for Safety Commercial Closed-Circuit Television Equipment | |
| UL Standard for Safety Fire Test for Heat and Visible Smoke Release for Discrete Products and Their Accessories Installed in Air-Handling Spaces | |
| UL Standard for Safety Fixed and Location-Dedicated Electric Room Heaters | |
| UL Standard for Safety Flexible Connector Piping for Fuels | |
| UL Standard for Safety General-Purpose Signaling Devices and Systems | |
| UL Standard for Safety Optical Fiber Cable Raceway | |
| UL Standard for Safety Single and Multiple Station Carbon Monoxide Alarms | |
| UL Standard for Safety Sway Brace Devices for Sprinkler System Piping | |
| Ultra High Definition Television | |
| Undercarpet cables - Rated voltage Uo/U: 300/500 V | |
| Unplasticized Polyvinyl Chloride (PVC) Moulded Fittings for Elastic Sealing Ring Type Joints for Use under Pressure - Pressure-Resistance Test | |
| V\xeatements \xe0 haute visibilit\xe9 - M\xe9thodes d\x92essai et exigences AMENDEMENT 1 | |
| V\xeatements \xe0 haute visibilit\xe9 - M\xe9thodes d\x92essai et exigences | |
| VALVE HANDBOOK | |
| Variante n. 1 | |
| Vibrations et chocs m\xe9caniques - Syst\xe8mes de montage r\xe9silients - Partie 1: Informations techniques \xe0 \xe9changer pour l'application des syst\xe8mes d'isolation | |
| Vibrations et chocs m\xe9caniques - Syst\xe8mes de montage r\xe9silients - Partie 2: Informations techniques \xe0 \xe9changer pour l\x92application d\x92isolation vibratoire associ\xe9e aux chemins de fer | |
| Vibrations et chocs m\xe9caniques - Syst\xe8mes de montage r\xe9silients - Partie 3: Informations techniques \xe0 \xe9changer pour l\x92application d\x92isolation vibratoire aux b\xe2timents neufs | |
| Vibrations et chocs m\xe9caniques, et leur surveillance - Vocabulaire | |
| Vibrations m\xe9caniques - Mesurage des vibrations \xe0 bord des navires - Partie 2: Mesurage des vibrations structurelles | |
| Vibrations m\xe9caniques - Mesurage des vibrations \xe0 bord des navires - Partie 3: Mesurage des vibrations des \xe9quipements de bord avant leur installation AMENDEMENT 1 | |
| Vibrations m\xe9caniques - Mesurage des vibrations \xe0 bord des navires - Partie 3: Mesurage des vibrations des \xe9quipements de bord avant leur installation | |
| Vibrations m\xe9caniques - Mesurage des vibrations \xe0 bord des navires - Partie 4: Mesurage et \xe9valuation des vibrations des machines de propulsion des navires AMENDEMENT 1 | |
| Vibrations m\xe9caniques - Mesurage des vibrations \xe0 bord des navires - Partie 4: Mesurage et \xe9valuation des vibrations des machines de propulsion des navires | |
| Vibrations m\xe9caniques - Mesurage des vibrations \xe0 bord des navires - Partie 5: Lignes directrices pour le mesurage, l\x92\xe9valuation et l\x92\xe9tablissemen t de rapports des vibrations affectant l\x92habitabilit\xe9 \xe0 bord... | |
| WATER DISTRIBUTION OPERATOR TRAINING HANDBOOK | |
| Water quality - Determination of total organic carbon (TOC), dissolved organic carbon (DOC), total bound nitrogen (TNb) and dissolved bound nitrogen (DNb) after high temperature catalytic oxidative combustion | |
| Water quality Determination of microcystins Method using solid phase extraction (SPE) and high performance liquid chromatography (HPLC) with ultraviolet (UV) detection |
| << Prev | Next >> |