Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
110
120
130
140
150
160
168
169
170
171
172
173
174
175
176
177
178
179
180
190
200
210
220
230
240
250
300
350
400
450
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) Brazing Filler Metal, Paste, Copper Water Thinning | |
| (R) Elastomer: Fluorocarbon (FKM) Aircraft Engine Oil, Fuel and Hydraulic Fluid Resistant Low Temperature Sealing Tg -40 \xb0F (-40 \xb0C) / 70 to 80 Hardness, for Products in Aircraft Engine... | |
| (R) ELASTOMER: METHYL PHENYL VINYL SILICONE (PVMQ) VERY LOW TEMPERATURE/AIRCRAFT PISTON ENGINE OIL RESISTANT HIGH STRENGTH/TEAR RESISTANT 45 TO 55 DUROMETER TYPE 'A' HARDNESS FOR PRODUCTS IN AIRCRAFT PISTON ENGINE... | |
| (R) Elastomer: Methyl Phenyl Vinyl Silicone (PVMQ) Very Low Temperature/Aircraft Piston Engine Oil Resistant High Strength/Tear Resistant 45 to 55 Durometer Type \x91A\x92 Hardness For Products in Aircraft Piston Engine... | |
| (R) Elastomer: Methyl Phenyl Vinyl Silicone Rubber (PVMQ) Extreme Low-Temperature Resistant 15 - 30 Type A Hardness | |
| (R) Elastomer: Methyl/Methyl Vinyl Silicone (MQ/VMQ) High Temperature Resistant High Strength/Tear Resistant 45 to 55 Type \x91A\x92 Durometer Hardness | |
| (R) Elastomer: Silicone Rubber (MQ/VMQ/PVMQ) Extreme Low-Temperature Resistant 35 \x96 45 Durometer Type \x91A\x92 | |
| (R) Elastomer: Silicone Rubber (VMQ) Aircraft Piston Engine Oil Resistant Compression Set Resistant 65 - 75 Type A Hardness | |
| (R) Elastomer: Tetrafluoroethylene/ Propylene (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 Hardness | |
| (R) Flux, Silver Brazing High Temperature | |
| (R) Flux, Silver Brazing | |
| (R) Heat Resistant Aluminized Paint | |
| (R) Polyimide, Molded Rod, Bar, and Tube, Plaque, and Formed Parts | |
| (R) Polytetrafluoroethyl ene (PTFE) Extrusions Normal Strength, As Sintered | |
| (R) Polytetrafluoroethyl ene (PTFE) Extrusions Premium Strength, As Sintered | |
| (R) Polytetrafluoroethyl ene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected | |
| (R) Polytetrafluoroethyl ene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved | |
| (R) Polyvinyl Chloride (PVC) Plastic Extrusions High Temperature, Flexible | |
| (R) Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications | |
| (R) Sealing Compound Aircraft Firewall, Silicone | |
| (R) Sealing Compound Aircraft Firewall | |
| (R) Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant | |
| ADHESIVE/SEALANT, FLUOROSILICONE AROMATIC FUEL RESISTANT, ONE-PART ROOM TEMPERATURE VULCANIZING (STABILIZED TYPE) | |
| Adhesive/Sealant, Fluorosilicone Aromatic Fuel Resistant, One-Part Room Temperature Vulcanizing | |
| BARRIER MATERIAL, WATER VAPOR RESISTANT, FLEXIBLE, OPAQUE | |
| Barrier Material, Water Vapor Resistant, Flexible, Transparent ) | |
| Barrier Material, Water Vapor Resistant, Flexible, Transparent | |
| BRAZING FILLER METAL, PASTE, COPPER Water Thinning | |
| CAST RODS, TUBES, AND SHAPES METHYL METHACRYLATE PLASTIC | |
| CAST RODS, TUBES, AND SHAPES, METHYL METHACRYLATE PLASTIC HEAT RESISTANT | |
| CAST RODS, TUBES, AND SHAPES, METHYL METHACRYLATE PLASTIC | |
| COATING, ABRASION RESISTANT FOR POLYCARBONATE PARTS | |
| Compound, Silicone Rubber, Insulating and Sealing 35 to 55 | |
| Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Low Viscosity, Room Temperature Cure | |
| Compound, Silicone Rubber, Insulating and Sealing Oil and Reversion Resistant, Medium Viscosity, Room Temperature Cure | |
| Dehydrating Agent Silica Gel | |
| Elastomer: Phenyl Methyl Vinyl Silicone (PVMQ) Low Temperature/Engine Oil Resistant High Strength/High Tear 55 to 65 Type \x93A\x94 Hardness For Products in Aircraft Piston Engine Oil/Low Temperature Environments | |
| ELASTOMERIC TUBING, ELECTRICAL INSULATION CROSSLINKED SILICONE, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE 1.750 TO 1 SHRINK RATIO (STABILIZED TYPE) | |
| Elastomeric Tubing, Electrical Insulation Crosslinked Silicone, Pigmented, Flexible, Heat-Shrinkable 1.750 to 1 Shrink Ratio (Stabilzed Type) | |
| Elastomeric Tubing, Electrical Insulation Crosslinked Silicone, Pigmented, Flexible, Heat-Shrinkable 1.750 to 1 Shrink Ratio | |
| ELASTOMERIC TUBING, ELECTRICAL INSULATION IRRADIATED POLYCHLOROPRENE, FLEXIBLE, HEAT-SHRINKABLE 1.750 TO 1 SHRINK RATIO | |
| ETHYLENE TETRAFLUOROETHYLENE (ETFE) EXTRUSIONS | |
| ETHYLENE TETRAFLUOROETHYLENE (ETFE) MOLDED SHEET Stress-Relieved | |
| ETHYLENE TETRAFLUOROETHYLENE (ETFE) MOLDINGS STRESS-RELIEVED | |
| ETHYLENE TETRAFLUOROETHYLENE SHEET, MOLDED Stress-Relieved | |
| FIBREBOARD Solid | |
| FIBREBOARD, CORRUGATED DOUBLE WALL | |
| FIBREBOARD, CORRUGATED SIUNGLE WALL, DOUBLE WALL | |
| FIBREBOARD, SOLID | |
| Film, Copper Clad Polyester | |
| FILM, POLYCHLOROTRIFLUOROE THYLENE (PCTFE) UNPLASTICIZED (STABILIZED TYPE) | |
| Film, Polychlorotrifluoroe thylene (PCTFE) Unplasticized | |
| FLEXIBLE PLASTIC EXTRUSIONS | |
| Fluid, Reference for Testing Polyalphaolefin (PAO) Resistant Material | |
| FLUX Brazing (Silver) | |
| Flux, Aluminum Brazing For Torch or Furnace Brazing | |
| Flux, Aluminum Brazing | |
| Flux, Aluminum Dip Brazing 1030 \xb0F (554 \xb0C) or Lower Liquidus | |
| FLUX, ALUMINUM DIP BRAZING 1030 DEGREES F (554 DEGREES C) OR LOWER LIQUIDUS | |
| FLUX, ALUMINUM DIP BRAZING 1090 DEG. F (588 DEG. C), FUSION POINT | |
| Flux, Aluminum Dip Brazing 1090 Degrees F (588 Degrees C) Fusion Point | |
| Flux, Aluminum Dip Brazing 1090\xb0F (588\xb0C), Fusion Point | |
| FLUX, ALUMINUM WELDING | |
| Flux, Brazing High Temperature | |
| FLUX, SILVER BRAZING HIGH TEMPERATURE | |
| Flux, Silver Brazing | |
| FOAM, FLEXIBLE POLYURETHANE (PUR) OPEN PORE, POLYVINYLCHLORIDE (PVC) COATED | |
| FOAM, FLEXIBLE POLYURETHANE OPEN CELL, MEDIUM FLEXIBILITY (STABILIZED TYPE) | |
| Foam, Flexible Polyurethane Open Cell, Medium Flexibility | |
| Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/ Cubic Foot (240 kg/m3) Density | |
| FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 15 POUNDS/CUBIC FOOT (240 KG/M3) DENSITY (STABILIZED TYPE) | |
| Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 15 Pounds/Cubic Foot (240 kg/m3) Density | |
| Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/ Cubic Foot (320 kg/m3) Density | |
| FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 20 POUNDS/CUBIC FOOT (320 KG/M3) DENSITY (STABILIZED TYPE) | |
| Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 20 Pounds/Cubic Foot (320 kg/m3) Density | |
| FOAM, POLYETHER URETHANE (EU) ELASTOMER, SHOCK ABSORBING 5 POUNDS/CUBIC FOOT (80 KG/M3) DENSITY (STABILIZED TYPE) (STABILIZED TYPE) | |
| Foam, Polyether Urethane (EU) Elastomer, Shock Absorbing 5 Pounds/Cubic Foot (80 kg/m3) Density | |
| Heat Resistant Aluminized Paint | |
| Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Double Wire Braid Reinforced, Chloroprene Covered, Noncollapsing | |
| Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Single Wire Braid Reinforced, Chloroprene Covered, Noncollapsing | |
| Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber Textile Reinforced, Chloroprene Covered Noncollapsing | |
| Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber, Double Wire Braid Reinforced, Chloroprene Covered, Noncollapsing | |
| Hose, Aircraft Fueling, Acrylonitrile Butadiene (NBR) Rubber, Textile Reinforced, Chloroprene Covered, Collapsing | |
| Hose, Polytetrafluoroethyl ene TFE Fluorocarbon Resin Wire Braid Reinforced | |
| Ignition Cable, High Tension Copper Conductor | |
| Leather, Chrome-Vegetable Retained, Cattle Hide Fuel and Hot Oil Resistant | |
| LEATHER, CHROME-VEGETABLE RETANNED, CATTLE HIDE FUEL AND HOT OIL RESISTANT (STABILIZED TYPE) | |
| Leather, Chrome-Vegetable Retanned, Cattle Hide Fuel and Hot Oil Resistant | |
| METHYL METHACRYLATE PLASTIC, SHEET HEAT RESISTANT (STABILIZED TYPE) | |
| Methyl Methacrylate Plastic, Sheet Heat Resistant | |
| Nylon Plastic, Moldings and Extrusions | |
| PACKING, PREFORMED, STRAIGHT THREAD TUBE FITTING BOSS, HYDRAULIC, -65 DEG. F TO 275 DEG. F | |
| PAPER, GREASEPROOF Acid Free - Noncorrosive - Light Duty | |
| PASTE, COPPER BRAZING Water Thinning | |
| PLASTIC EXTRUSIONS AND MOLDINGS, POLYCARBONATE GENERAL PURPOSE (STABILIZED TYPE) | |
| Plastic Extrusions and Moldings, Polycarbonate General Purpose | |
| PLASTIC EXTRUSIONS, FLEXIBLE Polyvinyl Chloride | |
| PLASTIC MOLDINGS & EXTRUSIONS POLYSTYRENE | |
| PLASTIC MOLDINGS AND EXTRUSIONS, CELLULOSE ACETATE BUTYRATE | |
| PLASTIC MOLDINGS AND EXTRUSIONS, CELLULOSE ACETATE GENERA PURPOSE | |
| Plastic Moldings and Extrusions, Cellulose Acetate General Purpose ) | |
| Plastic Moldings and Extrusions, Cellulose Acetate General Purpose | |
| PLASTIC MOLDINGS AND EXTRUSIONS, METHYL METHACRYLATE HEAT - RESISTANT | |
| Plastic Moldings and Extrusions, Methyl Methacrylate | |
| Plastic Moldings Melamine-Formaldehyd e, Mineral Filled | |
| Plastic Moldings, Laminated, Thermosetting Resin Glass Cloth Reinforced Heat Resistant | |
| Plastic Moldings, Silicone, Thermosetting Glass Roving Filled Heat Resistant | |
| PLASTIC MOLDINGS, THERMOSETTING PHENOL/FORMALDEHYDE, MACERATED-FABRIC-FIL LED | |
| PLASTIC MOLDINGS, THERMOSETTING Silicone, Glass Roving Filled, Heat Resistant | |
| PLASTIC ROD AND BAR, P0LYIMIDE Unfilled, Molded | |
| PLASTIC ROD AND BAR, POLYIMIDE Graphite/PTFE Filled, Molded 15/10 | |
| PLASTIC ROD AND BAR, POLYIMIDE UNFILLED, MOLDED | |
| Plastic Sheet and Film, Vinyl Copolymers Unplasticized | |
| Plastic Sheet and Strip, Modified Vinyl, Foamed Closed Cell | |
| Plastic Sheet Cotton Fabric Reinforced Phenol-Formaldehyde | |
| Plastic Sheet Methyl Methacrylate, General Purpose | |
| Plastic Sheet, Copper Faced Glass Cloth Reinforced Polytetrafluoroethyl ene | |
| Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin Hot Strength Retention | |
| PLASTIC SHEET, COPPER FACED GLASS FABRIC REINFORCED EPOXY RESIN, FLAMMABILITY CONTROLLED (STABILIZED TYPE) | |
| Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin, Flammability Controlled | |
| Plastic Sheet, Copper Faced Glass Fabric Reinforced Epoxy Resin | |
| PLASTIC SHEET, COPPER FACED PAPER REINFORCED PHENOLIC RESIN | |
| Plastic Sheet, Copper Faced, GTN Glass Fabric Reinforced Polytetrafluoroethyl ene | |
| PLASTIC SHEET, POLYCARBONATE GENERAL PURPOSE (STABILIZED TYPE) | |
| Plastic Sheet, Polycarbonate General Purpose | |
| Plastic Sheet, Post- Forming Cotton Fabric Reinforced Phenol- Formaldehyde | |
| PLASTIC SHEET, POST-FORMING COTTON FABRIC REINFORCED PHENOL-FORMALDEHYDE (STABILIZED TYPE) | |
| Plastic Sheet, Post-Forming Cotton Fabric Reinforced Phenol-Formaldehyde | |
| Plastic Tubing Cotton Fabric Reinforced Phenol-Formaldehyde | |
| PLASTIC TUBING, ELECTRICAL INSULATION CROSSLINDED POLYVINYL CHLORIDE, SEMI-RIGID HEAT SHRINKABLE 2 TO 1 SHRINK RATIO | |
| PLASTIC TUBING, ELECTRICAL INSULATION CROSSLINKED POLYVINYL CHLORIDE, FLEXIBLE HEAT SHRINKABLE 2 TO 1 SHRINK RATIO (STABILIZEDTYPE) | |
| Plastic Tubing, Electrical Insulation Crosslinked Polyvinyl Chloride, Flexible Heat Shrinkable 2 to 1 Shrink Ratio | |
| Plastic Tubing, Electrical Insulation Iradiated Polyolefin, Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio | |
| PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio | |
| Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Clear, Very Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio | |
| PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Heat Shrinkable | |
| PLASTIC TUBING, ELECTRICAL INSULATION Irradiated Polyolefin, Pigmented, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio | |
| Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Pigmented, Very Flexible, Heat- Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio | |
| PLASTIC TUBING, ELECTRICAL INSULATION IRRADIATED POLYOLEFIN, PIGMENTED, VERY FLEXIBLE, HEAT-SHRINKABLE LOW RECOVERY TEMPERATURE 2 TO 1 SHRINK RATIO (STABILIZED TYPE) | |
| Plastic Tubing, Electrical Insulation Irradiated Polyolefin, Pigmented, Very Flexible, Heat-Shrinkable Low Recovery Temperature 2 to 1 Shrink Ratio | |
| Plastic Tubing, Electrical Insulation Non-Crosslinked Polyvinyl Chloride, Flexible, Heat Shrinkable 1.6 to 1 Shrink Ratio | |
| Plastic Tubing, Electrical Insulation Polytetrafluoroethyl ene, Heat Shrinkable Overexpanded) | |
| PLASTIC TUBING, ELECTRICAL INSULATION Polytetrafluoroethyl ene, Heat Shrinkable Overexpanded | |
| Plastic Tubing, Electrical Insulation Polytetrafluoroethyl ene, Heat Shrinkable Standard Wall | |
| PLASTIC TUBING, ELECTRICAL INSULATION Polytetrafluoroethyl ene, Heat Shrinkable Thin Wall | |
| PLASTIC TUBING, ELECTRICAL INSULATION Polytetrafluoroethyl ene | |
| PLASTIC TUBING, ELECTRL. INSULTN. RESIN BONDED | |
| PLASTIC: POLYIMIDE FOR MOLDED ROD, BAR, AND TUBE, PLAQUE, AND FORMED PARTS (STABILIZED TYPE) | |
| Plastic: Polyimide For Molded Rod, Bar, and Tube, Plaque, and Formed Parts | |
| POLYAMIDE TYPE 6-6, PLASTIC MOLDINGS AND EXTRUSIONS (STABILIZED TYPE) | |
| Polyamide Type 6-6, Plastic Moldings and Extrusions | |
| POLYCARBONATE SHEET AND PARTS OPTICAL GRADE, COATED (STABILIZED TYPE) | |
| Polycarbonate Sheet and Parts Optical Grade, Coated | |
| POLYCHLOROTRIFLUOROE THYLENE (PCTFE), COMPRESSION MOLDED HEAVY SECTIONS, UNPLASTICIZED (STABILIZED TYPE) | |
| Polychlorotrifluoroe thylene (PCTFE), Compression Molded Heavy Sections, Unplasticized | |
| Polyester Film Electrical Grade, General Purpose | |
| POLYESTER FILM, COPPER CLAD for Electronic Applications | |
| POLYETHYLENE TEREPHTHALATE PLASTIC TUBING, ELECTRICAL INSULATION - THERMALLY WELDED, HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO | |
| POLYETHYLENE TEREPHTHALATE PLASTIC TUBING, ELECTRICAL INSULATION -THERMALLY WELDED, HEAT SHRINKABLE 1.6 TO 1 SHRINK RATIO | |
| POLYETHYLENE TEREPHTHALATE PLASTIC TUBING, ELECTRICAL INSULATION Thermally Welded, Heat Shrinkable 1.6 to 1 Shrink Ratio | |
| POLYFLUOROETHYLENE PROPYLENE FILM AND SHEET (STABILIZED TYPE) | |
| Polyfluoroethylene Propylene Film and Sheet | |
| Polyfluoroethylene-P ropylene Film and Sheet | |
| Polyimide, Molded Rod, Bar, and Tube, Plaque, and Formed Parts | |
| Polytetrafluoroethyl ene (PTFE) - Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 75 - 85 | |
| Polytetrafluoroethyl ene (PTFE) - Fluorosilicone (FVMQ) Rubber High Temperature Fuel and Oil Resistant 75-85 | |
| POLYTETRAFLUOROETHYL ENE (PTFE) EXTRUSIONS NORMAL STRENGTH, AS SINTERED (STABILIZED TYPE) | |
| Polytetrafluoroethyl ene (PTFE) Extrusions Normal Strength, As Sintered | |
| Polytetrafluoroethyl ene (PTFE) Extrusions Premium Strength, As Sintered | |
| POLYTETRAFLUOROETHYL ENE (PTFE) EXTRUSIONS PREMIUM STRENGTH, SINTERED AND STRESS-RELIEVED (STABILIZED TYPE) | |
| Polytetrafluoroethyl ene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected | |
| Polytetrafluoroethyl ene (PTFE) Extrusions Premium Strength, Sintered and Stress-Relieved | |
| POLYTETRAFLUOROETHYL ENE (PTFE) FILM NON-CRITICAL GRADE (STABILIZED TYPE) | |
| Polytetrafluoroethyl ene (PTFE) Film Non-Critical Grade | |
| POLYTETRAFLUOROETHYL ENE (PTFE) MOLDINGS GENERAL PURPOSE GRADE, AS SINTERED (STABILIZED TYPE) | |
| Polytetrafluoroethyl ene (PTFE) Moldings General Purpose Grade, As Sintered | |
| Polytetrafluoroethyl ene Extrusions Normal Strength, As Sintered, Radiographically Inspected | |
| Polytetrafluoroethyl ene Extrusions Normal Strength, as Sintered | |
| Polytetrafluoroethyl ene Extrusions Premium Strength, as Sintered | |
| Polytetrafluoroethyl ene Extrusions Premium Strength, Sintered and Stress-Relieved Radiographically Inspected | |
| Polytetrafluoroethyl ene Extrusions Premium Strength, Sintered and Stress-Relieved | |
| POLYTETRAFLUOROETHYL ENE FILM Non-Critical Grade | |
| POLYTETRAFLUOROETHYL ENE | |
| POLYURETHANE, FOAM-IN-PLACE, RIGID CLOSED CELL, FOR HELMET LINERS | |
| POLYVINYL CHLORIDE (PVC) PLASTIC EXTRUSIONS HIGH TEMPERATURE, FLEXIBLE (STABILIZED TYPE) | |
| Polyvinyl Chloride (PVC) Plastic Extrusions High Temperature, Flexible | |
| Polyvinyl Chloride Tubing, Extruded, High Temperature Electrical Insulation | |
| Protective Film, Polyurethane Pressure Sensitive Adhesive, for Aircraft Exterior Applications | |
| Resin Polyurethane, Foam- in-Place, Rigid | |
| RESIN POLYURETHANE, FOAM-IN-PLACE, RIGID (STABILIZED TYPE) | |
| Resin Polyurethane, Foam-In-Place, Rigid | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 45 Durometer "A" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 55 Durometer "A" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 55 Durometer "D" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 65 Durometer "A" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 65 Durometer "D" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 75 Durometer "A" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 75 Durometer "D" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 85 Durometer "A" | |
| RESIN, POLYETHER URETHANE (EU) CASTING Flexible, Solid, Unfilled 95 Durometer "A" | |
| Resin, Polyether Urethane (EU) Casting Flexible, Solid, Unfilled | |
| RESIN, POLYIMIDE, LAMINATING AND MOLDING High Temperature Resistant, 370 \xb0C (700 \xb0F) Unfilled, Addition Polymer | |
| RESIN, POLYIMIDE, LAMINATING AND MOLDING High Temperature Resistant, 370 \xb0C or 700 \xb0F Unfilled, Addition Polymer | |
| Resin, Polyimide, Laminating and Molding High Temperature Resistant, 370 Degrees C (700 Degrees F) Unfilled, Addition Polymer | |
| Resin, Polyimide, Laminating and Molding High Temperature Resistant, 370 Degrees C or 700 Degrees F Unfilled, Addition Polymer | |
| Resin, Polyimide, Laminating High Temperature Resistant, 315 \xb0C (599 \xb0F) | |
| RESIN, POLYIMIDE, LAMINATING HIGH TEMPERATURE RESISTANT, 315 DEGREES C (599 DEGREES F) (STABILIZED TYPE) | |
| Resin, Polyimide, Laminating High Temperature Resistant, 315 Degrees C (599 Degrees F) | |
| Resin, Polyimide, Thermosetting High Heat (290 \xb0C (554 \xb0F) Resistant) | |
| Resin, Polyimide, Thermosetting High Heat (290 C (554 F) Resistant) | |
| Resin, Polyurethane (EU) Casting Polyether-Type, Flexible, Solid Low- Temperature Resistant, 80 to 90 | |
| Resin, Polyurethane (EU) Casting Polyether-type, Flexible, Solid Low-Temperature Resistant, 80 to 90 | |
| RODS, SHEETS, AND MOLDED SHAPES, POLYCHLOROTRIFLUOROE THYLENE (PCTFE) UNPLASTICIZED (STABILIZED TYPE) | |
| Rods, Sheets, and Molded Shapes, Polychlorotrifluoroe thylene (PCTFE) Unplasticized | |
| Rubber, Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -22 \xb0F (-30 \xb0C) For Elastomeric Shapes or Parts in Gas Turbine Engine Oil, Fuel and Hydraulic Systems... | |
| Rubber, Silicone (VMQ) Lubricating Oil and Compression Set Resistant 65 - 75 | |
| Rubber, Silicone 1200 psi (8.27 MPa), High Modulus 45 - 55 | |
| Rubber: Fluorocarbon Elastomer (FKM) 70 to 80 Hardness, Low Temperature Sealing Tg -40 Degree F (-40 Degree C) For Elastomeric Parts in Aircraft Engine Oil, Fuel and Hydraulics Systems | |
| Sealant, Silicone, Two- Part, General Purpose Room Temperature Vulcanizing Non-Fuel Resistant | |
| Sealant, Silicone, Two-Part, General Purpose Room Temperature Vulcanizing Non-Fuel Resistant | |
| SEALING COMPOUND AIRCRAFT FIREWALL, SILICONE | |
| Sealing Compound Two-Part, Addition Cured Silicone (Type 2) Firewall Sealant | |
| Sealing Compound Two-Part, Condensation Cured (Type 3) Firewall Sealant | |
| Sealing Compound Two-Part, Polysulfide (Type 4) Firewall Sealant | |
| Sealing Compound, Aircraft Firewall, Non-Silicone | |
| Sealing Compound, Electrically Conductive Corrosion Inhibiting | |
| Sealing Compound, Flame Resistant, Non-Silicone | |
| Sealing Compound, Non-Curing, Fluorosilicone Groove Injection Temperature and Fuel Resistant | |
| Sealing Compound, Non-Curing, Groove Injection Temperature and Fuel Resistant | |
| Sealing Compound, One-Part Silicone (Type 1) Aircraft Firewall | |
| Sealing Compound, Polysulfide for Aircraft Windshields aand Canopies, for Use up to 250 Degrees F (121 Degrees C) | |
| Sealing Compound, Polysulfide For Aircraft Windshields and Canopies, For Use up to 250 \xb0F (121 \xb0C) | |
| Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels | |
| Sealing Compound, Two-Part, Addition Cured Silicone (Type 2) Firewall Sealant | |
| Sealing Compound, Two-Part, Condensation Cured (Type 3) Firewall Sealant | |
| Sealing Compound, Two-Part, Polysulfide (Type 4) Firewall Sealant | |
| Sheet, Polychlorotrifluoroe thylene (PCTFE) Molded, Unplasticized | |
| Sheet, Polychlorotrifluoroe thylene (PCTFE), Molded, Unplasticized | |
| SHEET, POLYETHER URETHANE (EU) ELASTOMER FOAM SHOCK ABSORBING (STABILIZED TYPE) | |
| Sheet, Polyether Urethane (EU) Elastomer Foam Shock Absorbing | |
| SILICONE (PVMQ) RUBBER EXTREME-LOW-TEMPERAT URE RESISTANT 55 - 65 (STABILIZED TYPE) | |
| Silicone (PVMQ) Rubber Extreme-Low-Temperat ure Resistant 55 - 65 | |
| SILICONE (PVMQ) RUBBER EXTREME-LOW-TEMPERAT URE RESISTANT 65 - 75 | |
| SILICONE (PVMQ) RUBBER EXTREME-LOW-TEMPERAT URE RESISTANT 75 - 85 (STABILIZED TYPE) | |
| Silicone (PVMQ) Rubber Extreme-Low-Temperat ure Resistant 75 - 85 | |
| SILICONE (VMQ) RUBBER 1100 PSI (7.58 MPA) TENSILE STRENGTH, HIGH RESILIENCY 65 - 75 (STABILIZED TYPE) | |
| Silicone (VMQ) Rubber 1100 psi (7.58 MPa) Tensile Strength, High Resiliency 65 - 75 | |
| Silicone (VMQ) Rubber 1150 psi (7.93 MPa) Tensile Strength, High Resiliency 25 - 35 | |
| Silicone (VMQ) Rubber Lubricating Oil and Compression Set Resistant, Electrical Grade 55 - 65 | |
| Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pa.s) Viscosity | |
| Silicone Potting Compound, Elastomeric Two-Part, General Purpose 150 to 400 Poise (15 to 40 Pascal-sec) Viscosity | |
| SILICONE POTTING COMPOUND, ELASTOMERIC Two-Part, General Purpose 200 - 400 Poise Viscosity | |
| SILICONE POTTING COMPOUND, ELASTOMERIC TWO-PART, GENERAL PURPOSE 200 - 600 POISE VISCOSITY | |
| Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pa\xb7s) Viscosity | |
| Silicone Potting Compound, Elastomeric Two-Part, General Purpose 200 to 400 Poises (20 to 40 Pascal- Sec) Viscosity | |
| Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pa\xb7s) Viscosity | |
| Silicone Potting Compound, Elastomeric Two-Part, General Purpose 80 to 180 Poise (8 to 18 Pascal- Sec) Viscosity | |
| Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure | |
| SILICONE RESIN, ELASTOMERIC, OPAQUE ELEVATED TEMPERATURE CURE | |
| SILICONE RESIN, ELASTOMERIC, OPAQUE ROOM TEMPERATURE CURE | |
| SILICONE RESIN, ELASTOMERIC, TRANSPARENT ELEVATED TEMPERATURE CURE(STABILIZED TYPE) | |
| Silicone Resin, Elastomeric, Transparent Elevated Temperature Cure | |
| Silicone Resin, Elastomeric, Transparent Room Temperature Cure | |
| Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 45 - 55 Durometer | |
| Silicone Rubber 1000 psi (6.89 MPa) Minimum Tensile Strength 55 - 65 Durometer | |
| Silicone Rubber 1000 psi (6.90 MPa) Tensile Strength 45 - 55 | |
| Silicone Rubber 1000 psi (6.90 MPa) Tensile Strength 55 - 65 | |
| Silicone Rubber 1200 psi (8.25 MPa), High Modulus 45 - 55 | |
| SILICONE RUBBER 1800 PSI 45 - 55 | |
| Silicone Rubber 1800 psi 45-55 | |
| Silicone Rubber Compound Room Temperature Vulcanizing, 1,200,000 Centipoise Viscosity (Durometer 55 - 70 ) | |
| Silicone Rubber Compound Room Temperature Vulcanizing, 1,200,000 Centipoise Viscosity Durometer 55 - 70 ) | |
| SILICONE RUBBER COMPOUND Room Temperature Vulcanizing, 1,200,000 Centipoise Viscosity Durometer 55 - 70 | |
| SILICONE RUBBER COMPOUND ROOM TEMPERATURE VULCANIZING, 15,000 CENTIPOISE VISCOSITY DUROMETER 35 - 55 (STABILIZED TYPE) | |
| Silicone Rubber Compound Room Temperature Vulcanizing, 15,000 Centipoise Viscosity Durometer 35 - 55 | |
| Silicone Rubber Compound Room Temperature Vulcanizing, 35,000 Centipoise Viscosity Durometer 40 - 55 ) | |
| Silicone Rubber Compound Room Temperature Vulcanizing, 35,000 Centipoise Viscosity Durometer 40 - 55 | |
| SILICONE RUBBER COMPOUND Room Temperature Vulcanizing, 35,000 Centipoises Vicosity (Durometer 40 \x96 55) | |
| SILICONE RUBBER COMPOUND Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Durometer 30 - 45 | |
| Silicone Rubber Compound Room Temperature Vulcanizing, 50,000 Centipoise Viscosity Short Application Life, Durometer 35 - 55 | |
| SILICONE RUBBER COMPOUND Room Temperature Vulcanizing, 50,000 Centipoises Viscosity (Durometer 30 - 45) | |
| SILICONE RUBBER COMPOUND Room Temperature Vulcanizing, 50,000 Centipoises Viscosity Durometer 30 - 45 | |
| Silicone Rubber Compound Room Temperature Vulcanizing, 55,000 Centipoise Viscosity Durometer 55 - 70 | |
| Silicone Rubber Extreme Low-Temperature Resistant 15 - 30 | |
| SILICONE RUBBER EXTREME LOW-TEMPERATURE RESISTANT 35 - 45 | |
| SILICONE RUBBER EXTREME LOW-TEMPERATURE RESISTANT 45 - 55 (STABILIZED TYPE) | |
| Silicone Rubber Extreme Low-Temperature Resistant 45 - 55 | |
| Silicone Rubber, Fiberglass Fabric Reinforced | |
| Tetrafluoroethylene/ Propylene Rubber (FEPM) Hydraulic Fluid and Synthetic Oil Resistant 70 to 80 and 85 to 95 | |
| Tetrafluoroethylene/ Propylene Rubber (FEPM); Hydraulic Fluid and Synthetic Oil Resistant 75 to 90 | |
| TUBING, ELECTRICAL INSULATION LIGHT WALL, EXTRUDED POLYTETRAFLUOROETHYL ENE (PTFE) (STABILIZED TYPE) | |
| Tubing, Electrical Insulation Light Wall, Extruded Polytetrafluoroethyl ene (PTFE) | |
| Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluoroethyl ene (PTFE) | |
| Tubing, Electrical Insulation Standard Wall, Extruded Polytetrafluoroethyl ene | |
| TUBING, ELECTRICAL INSULATION THIN WALL, EXTRUDED POLYTETRAFLUOROETHYL ENE (PTFE) | |
| TUBING, IRRADIATED POLYCHLOROPRENE ELASTOMER, ELECTRICAL INSULATION FLEXIBLE, HEAT-SHRINKABLE, 1.750 TO 1 SHRINK RATIO (STABILIZED TYPE) | |
| Tubing, Irradiated Polychloroprene Elastomer, Electrical Insulation Flexible, Heat-Shrinkable, 1.750 to 1 Shrink Ratio | |
| Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Flexible, Heat Shrinkable 2 to 1 Shrink Ratio | |
| Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Clear, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio | |
| TUBING, IRRADIATED POLYOLEFIN PLASTIC, ELECTRICAL INSULATION PIGMENTED, SEMI-RIGID, HEAT SHRINKABLE, 2 TO 1 SHRINK RATIO (STABILIZED TYPE) | |
| Tubing, Irradiated Polyolefin Plastic, Electrical Insulation Pigmented, Semi-Rigid, Heat Shrinkable, 2 to 1 Shrink Ratio | |
| TUBING, PLASTIC, ELECTRICAL INSULATION IRRADIATED POLYOLEFIN, PIGMENTED, FLEXIBLE, HEAT-SHRINKABLE 2 TO 1 SHRINK RATIO (STABILIZED TYPE) | |
| Tubing, Plastic, Electrical Insulation Irradiated Polyolefin, Pigmented, Flexible, Heat-Shrinkable 2 to 1 Shrink Ratio | |
| Tubing, Plastic, Electrical Insulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat- Shrinkable Marker Sleeving Grade Low Outgassing | |
| TUBING, PLASTIC, ELECTRICAL INSULATION IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE 2 TO 1 SHRINK RATIO (STABILIZED TYPE) | |
| Tubing, Plastic, Electrical Insulation Irradiated Polyvinylidene Fluoride, Semi-Rigid, Heat-Shrinkable 2 to 1 Shrink Ratio | |
| TUBING, PLASTIC, ELECTRICAL INSULATION IRRADIATED POLYVINYLIDENE FLUORIDE, SEMI-RIGID, HEAT-SHRINKABLE MARKER SLEEVING GRADE LOW OUTGASSING | |
| Tubing, Polychlorotrifluoroe thylene (PCTFE) Unplasticized | |
| TUBING, POLYOLEFIN PLASTIC, ELECTRICAL INSULATION SELECTIVELY CROSSLINKED, SEMI-RIGID, HEAT-SHRINKABLE (STABILIZED TYPE) | |
| Tubing, Polyolefin Plastic, Electrical Insulation Selectively Crosslinked, Semi-Rigid, Heat-Shrinkable | |
| VULCANIZED FIBER SHEET (STABILIZED TYPE) | |
| Vulcanized Fiber Sheet | |
| VULCANIZED FIBRE | |
| WRAPER, GREASEPROOF - PAPER (Single Ply) |
| << Prev | Next >> |