Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1250
1300
1350
1400
1450
1500
1510
1520
1530
1540
1550
1560
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Acoustics - Audiometric test methods - Part 1: Pure-tone air and bone conduction audiometry (ISO 8253-1:2010) | |
| Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO 8253-2:2009) | |
| Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO 8253-3:2012) | |
| Acoustics - Determination of occupational noise exposure - Engineering method (ISO 9612:2009) | |
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 1: Measurement at discrete points (ISO 9614-1:1993) | |
| Acoustics - Determination of sound power levels of noise sources using sound intensity - Part 3: Precision method for measurement by scanning (ISO 9614-3:2002) | |
| ACOUSTICS. DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND INTENSITY. PART 2: MEASUREMENT BY SCANNING (ISO 9614-2:1996). | |
| Adhesives - Guide to the selection of standard laboratory ageing conditions for testing bonded joints (ISO 9142:2003) | |
| Adhesives. Peel test for a flexible-bonded-to-r igid test specimen assembly. Part 2: 180 degree peel (ISO 8510-2:2006) | |
| Air quality - Definition and determination of performance characteristics of an automatic measuring system (ISO 9169:2006) (Endorsed by AENOR in October of 2006.) | |
| Aluminium caps for transfusion, infusion and injection bottles - General requirements and test methods (ISO 8872:2003) | |
| ANAESTHETIC AND RESPIRATORY CARE ALARM SIGNALS. PART 3: GUIDANCE ON APPLICATION OF ALARMS (ISO 9703-3:1998) | |
| Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 1: HMEs for use with minimum tidal volumes of 250 ml (ISO... | |
| Anaesthetic and respiratory equipment - Heat and moisture exchangers (HMEs) for humidifying respired gases in humans - Part 2: HMEs for use with tracheostomized patients having minimum tidal volumes of... | |
| Animal and vegetable fats and oils - Determination of water content - Karl Fischer method (pyridine free) (ISO 8534:2017) | |
| APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 3: COPPER AND COPPER ALLOYS (ISO 9606-3:1999) | |
| APPROVAL TESTING OF WELDERS - FUSION WELDING - PART 4: NICKEL AND NICKEL ALLOYS (ISO 9606-4:1999) | |
| Approval testing of welders. Fusion welding. Part 5: Titanium and titanium alloys, zirconium and zirconium alloys (ISO 9606-5:2000). | |
| Awnings for leisure accommodation vehicles - Requirements and test methods (ISO 8936:2017) | |
| BANKING AND RELATED FINANCIAL SERVICES. REQUIREMENTS FOR MESSAGE AUTHENTICATION (RETAIL). (ISO 9807:1991). | |
| Building construction - Jointing products - Part 2: Determination of extrudability of sealants using standardized apparatus (ISO 8394-2:2010) | |
| Building Information Modelling - Level of Information Need - Part 1 Concepts and principles (ISO 7817-1:2024) | |
| Buildings and civil engineering works - Determination of extrudability for sealant - Part 2: Using standardized apparatus (ISO 8394-2:2017) | |
| Cardiovascular implants and extracorporeal systems - Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (ISO 8638:2010) | |
| Cardiovascular implants and extracorporeal systems - Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO 8637:2010, including Amendment 1 2013-04-01) | |
| Cereals and milled cereal products - Determination of the viscosity of flour - Method using an amylograph (ISO 7973:1992) | |
| Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 1: Molecular absorption spectrometric method for cheese rind (ISO 9233-1:2018) | |
| Cheese, cheese rind and processed cheese - Determination of natamycin content - Part 2: High-performance liquid chromatographic method for cheese, cheese rind and processed cheese (ISO 9233-2:2007 including Amd 1:2012)... | |
| Child-resistant packaging - Requirements and testing procedures for reclosable packages (ISO 8317:2015) | |
| Coating powders - Part 10: Determination of deposition efficiency (ISO 8130-10:1998) | |
| Coating powders - Part 11: Inclined-plane flow test (ISO 8130-11:1997) | |
| Coating powders - Part 12: Determination of compatibility (ISO 8130-12:1998) | |
| Coating powders - Part 13: Particle size analysis by laser diffraction (ISO 8130-13:2001) | |
| Coating powders - Part 14: Terminology (ISO 8130-14:2004) | |
| Coating powders - Part 15: Rheology (ISO 8130-15:2023) | |
| Coating powders - Part 16: Determination of density by liquid displacement in a measuring cylinder (ISO 8130-16:2022) | |
| Coating powders - Part 1: Determination of particle size distribution by sieving (ISO 8130-1:1992) | |
| Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor 1:1993) | |
| Coating powders - Part 5: Determination of flow properties of a powder/air mixture (ISO 8130-5:1992) | |
| Coating Powders - Part 6: Determination of gel time of thermosetting coating powders at a given temperature (ISO 8130-6:1992, including Amd 1:1998) | |
| Coating powders - Part 7: Determination of loss of mass on stoving (ISO 8130-7:1992) | |
| Coating powders - Part 8: Assessment of the storage stability of thermosetting powders (ISO 8130-8:1994) | |
| COATING POWDERS - PART 9: SAMPLING (ISO 8130-9:1992) | |
| Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) | |
| Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003) | |
| Conveyor belts - Determination of elastic and permanent elongation and calculation of elastic modulus (ISO 9856:2003/Amd 1:2012) | |
| Corrosion of metals and alloys - Basic terms and definitions (ISO 8044:2015) | |
| Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2012) | |
| Corrosion tests in artificial atmospheres - Salt spray tests - Amendment 1: Footnote of warning (ISO 9227:2022/Amd 1:2024) | |
| Cycles - Safety requirements for bicycles for young children (ISO 8098:2014) | |
| Decontamination of radioactively contaminated surfaces - Testing of decontamination agents for textiles (ISO 9271:2023) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in September of 2024.) | |
| DENTAL EQUIPMENT. GRAPHICAL SYMBOLS. (ISO 9687:1993). | |
| Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO 9693-2:2016) | |
| Dentistry - Graphical symbols for dental equipment (ISO 9687:2015/Amd 1:2018) | |
| Dentistry - Test methods for rotary instruments (ISO 8325:2004) | |
| Destructive tests on welds in metallic materials - Fracture test (ISO 9017:2001) | |
| Destructive tests on welds in metallic materials - Hardness testing - Part 1: Hardness test on arc welded joints (ISO 9015-1:2001) | |
| Destructive tests on welds in metallic materials - Hardness testing - Part 2: Microhardness testing of welded joints (ISO 9015-2:2003) | |
| Destructive tests on welds in metallic materials - Impact tests - Test specimen location, notch orientation and examination (ISO 9016:2012) | |
| Destructive tests on welds in metallic materials - Tensile test on cruciform and lapped joints (ISO 9018:2015) | |
| Determination of sustained combustibility of liquids (ISO 9038:2013) | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003) | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2: Identification and characterization (ISO 8871-2:2003) | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 2: Identification and characterization - Amendment 1 (ISO 8871-2:2003/Amd 1:2005) | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 4: Biological requirements and test methods (ISO 8871-4:2006) | |
| Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing (ISO 8871-5:2016) | |
| Elastomeric parts for parenterals and for devices for pharmaceuticals use - Part 3: Determination of released-particle count (ISO 8871-3:2003) | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 11: Guidance on usability (ISO 9241-11:1998) | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 12: Presentation of information (ISO 9241-12:1998) | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS) - PART 14: MENU DIALOGUES (ISO 9241-14:1997) | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 5: Workstation layout and postural requirements (ISO 9241-5:1998) | |
| Ergonomic requirements for office work with visual display terminals (VDTs) - Part 9: Requirements for non-keyboard input devices. (ISO 9241-9:2000) | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 13: USER GUIDANCE (ISO 9241-13:1998) | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 15: COMMAND DIALOGUES (ISO 9241-15:1997). | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 16: DIRECT MANIPULATION DIALOGUES (ISO 9241-16:1999) | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 1: GENERAL INTRODUCTION. (ISO 9241-1:1997). | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 4: KEYBOARD REQUIREMENTS (ISO 9241-4:1998) | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTs). PART 6: GUIDANCE ON THE WORK ENVIRONMENT (ISO 9241-6:1999) | |
| ERGONOMIC REQUIREMENTS FOR OFFICE WORK WITH VISUAL DISPLAY TERMINALS (VDTS). PART 7: REQUIREMENTS FOR DISPLAY WITH RELECTIONS. (ISO 9241-7:1998). | |
| Ergonomics of human-system interaction - Part 110: Dialogue principles (ISO 9241-110:2006) | |
| Ergonomics of human-system interaction - Part 112: Principles for the presentation of information (ISO 9241-112:2017) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2017.) | |
| Ergonomics of human-system interaction - Part 115: Guidance on conceptual design, user-system interaction design, user interface design, and navigation design (ISO 9241-115:2024) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June... | |
| Ergonomics of human-system interaction - Part 400: Principles and requirements for physical input devices (ISO 9241-400:2007) | |
| Ergonomics of human-system interaction - Part 420: Selection of physical input devices (ISO 9241-420:2011) (Endorsed by AENOR in September of 2011.) | |
| Ergonomics of human-system interaction - Part 920: Guidance on tactile and haptic interactions (ISO 9241-920:2009) (Endorsed by AENOR in October of 2016.) | |
| Ergonomics of the thermal environment - Analytical determination and interpretation of heat stress using calculation of the predicted heat strain (ISO 7933:2004) | |
| Ergonomics of the thermal environment - Determination of metabolic rate (ISO 8996:2004) | |
| Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements (ISO 80079-36:2016) | |
| Explosive atmospheres - Part 36: Non-electrical equipment for explosive atmospheres - Basic method and requirements - Technical Corrigendum 1 (ISO 80079-36:2016/Cor 1:2019) | |
| Explosive atmospheres - Part 37: Non-electrical equipment for explosive atmospheres - Non-electrical type of protection constructional safety ''c'', control of ignition sources ''b'', liquid immersion ''k'' (ISO 80079-37:2016) | |
| Extracorporeal systems for blood purification - Part 2: Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (ISO 8637-2:2018) | |
| Ferronickel shot - Sampling for analysis (ISO 8049:2016) | |
| FERTILIZERS. DETERMINATION OF BULK DENSITY (LOOSE) OF FINE-GRAINED FERTILIZERS. (ISO 7837:1992) | |
| Fibre ropes - General specifications (ISO 9554:2019) | |
| FINANCIAL TRANSACTION CARD ORIGINATED MESSAGES. INTERCHANGE MESSAGE SPECIFICATIONS. (ISO 8583:1993). | |
| FINANCIAL TRANSACTION CARD ORIGINATED MESSAGES. INTERCHANGE MESSAGE SPECIFICATIONS. PART 2: APPLICATION AND REGISTRATION PROCEDURES FOR INSTITUTION IDENTIFICATION CODES (IIC) (ISO 8583-2:1998) | |
| FINANCIAL TRANSACTION CARD ORIGINATED MESSAGES. INTERCHANGE MESSAGE SPECIFICATIONS. PART 3: MAINTENANCE PROCEDURES FOR CODES (ISO 8583-3:1998) | |
| Gas cylinders - Design, construction and testing of refillable seamless steel gas cylinders and tubes - Part 4: Stainless steel cylinders with an Rm value of less than 1 100... | |
| Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing (ISO 7866:2012) | |
| Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 1 (ISO 7866:2012/Amd 1:2020) | |
| Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Amendment 2 (ISO 7866:2012/Amd 2:2024) | |
| Gas cylinders - Refillable seamless aluminium alloy gas cylinders - Design, construction and testing - Technical Corrigendum 1 (ISO 7866:2012/Cor 1:2014) | |
| Gas welding equipment - Air-aspirated hand blowpipes - Specifications and tests (ISO 9012:2008) | |
| Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010) | |
| Gas welding equipment - Materials for equipment used in gas welding, cutting and allied processes (ISO 9539:2010/AMD 1:2013) | |
| General methods of test for pigments - Part 19: Determination of water-soluble nitrates (Salicyclic acid method) (ISO 787-19:1974) | |
| General methods of test for pigments and extenders - Part 13: Determination of water-soluble sulfates, chlorides and nitrates (ISO 787-13:2002) | |
| General methods of test for pigments and extenders - Part 14: Determination of resistivity of aqueous extract (ISO 787-14:2002) | |
| General methods of test for pigments and extenders - Part 15: Comparison of resistance to light of coloured pigments of similar types (ISO 787-15:1986) | |
| General methods of test for pigments and extenders - Part 17: Comparison of lightening power of white pigments (ISO 787-17:2002) | |
| General methods of test for pigments and extenders - Part 1: Comparison of colour of pigments (ISO 787-1:1982) | |
| General methods of test for pigments and extenders - Part 21: Comparison of heat stability of pigments using a stoving medium (ISO 787-21:1979) | |
| General methods of test for pigments and extenders - Part 22: Comparison of resistance to bleeding of pigments (ISO 787-22:1980) | |
| General methods of test for pigments and extenders - Part 25: Comparison of the colour, in full-shade systems, of white, black and coloured pigments - Colorimetric method (ISO 787-25:1993) | |
| General methods of test for pigments and extenders - Part 2: Determination of matter volatile at 105 degrees C (ISO 787-2:1981) | |
| General methods of test for pigments and extenders - Part 3: Determination of matter soluble in water - Hot extraction method. (ISO 787-3:2000) | |
| General methods of test for pigments and extenders - Part 4: Determination of acidity or alkalinity of the aqueous extract (ISO 787-4:1981) | |
| General methods of test for pigments and extenders - Part 7: Determination of residue on sieve - Water method - Manual procedure (ISO 787-7:2009) | |
| General methods of test for pigments and extenders - Part 8: Determination of matter soluble in water - Cold extraction method. (ISO 787-8:2000) | |
| General methods of test for pigments and extenders - Part 9: Determination of pH value of aqueous suspension (ISO 787-9:1981) | |
| GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 10: DETERMINATION OF DENSITY. PYCNOMETER METHOD. (ISO 787-10:1993). | |
| GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 11: DETERMINATION OF TAMPED VOLUME AND APPARENT DENSITY AFTER TAMPING. (ISO 787-11:1981). | |
| GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 16: DETERMINATION OF RELATIVE TINTING STRENGTH (OR EQUIVALENT COLOURING VALUE) AND COLOUR ON REDUCTION OF COLOURED PIGMENTS. VISUAL COMPARISON METHOD. (ISO... | |
| GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 18: DETERMINATION OF RESIDUE ON SIEVE. MECHANICAL FLUSING PROCEDURE. (ISO 787-18:1983). | |
| GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 23: DETERMINATION OF DENSITY (USING A CENTRIFUGE TO REMOVE ENTRAINED AIR ). (ISO 787-23:1979). | |
| GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 24: DETERMINATION OF RELATIVE TINTING STRENGTH OF COLOURED PIGMENTS AND RELATIVE SCATTERING POWER OF WHITE PIGMENTS. PHOTOMETRIC METHODS. (ISO 787-24:1985). | |
| GENERAL METHODS OF TEST FOR PIGMENTS AND EXTENDERS. PART 5: DETERMINATION OF OIL ABSORPTION VALUE. (ISO 787-5:1980). | |
| GEOMETRICAL PRODUCT SPECIFICATION (GSP). SURFACE IMPERFECTIONS. TERMS, DEFINITIONS AND PARAMETERS (ISO 8785:1998) | |
| Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 1: Vocabulary (ISO 8062-1:2007) | |
| Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007) | |
| Geometrical product specifications (GPS) - Dimensional measuring equipment: Dial test indicators (lever type) - Design and metrological characteristics (ISO 9493:2010) | |
| Geometrical product specifications (GPS) - Fundamentals - Concepts, principles and rules (ISO 8015:2011) | |
| Geosynthetics - Sampling and preparation of test specimens (ISO 9862:2005) | |
| GROOVED PINS WITH COUNTERSUNK HEAD. (ISO 8747:1997). | |
| GROOVED PINS WITH ROUND HEAD. (ISO 8746:1997). | |
| GROOVED PINS. FULL-LENGTH PARALLEL GROOVED, WITH CHAMFER. (ISO 8740:1997). | |
| GROOVED PINS. FULL-LENGTH PARALLEL GROOVED, WITH PILOT. (ISO 8739:1997). | |
| GROOVED PINS. FULL-LENGTH TAPER GROOVED. (ISO 8744:1997). | |
| GROOVED PINS. HALF-LENGTH CENTRE GROOVED. (ISO 8743:1997). | |
| GROOVED PINS. HALF-LENGTH REVERSE-TAPER GROOVED. (ISO 8741:1997). | |
| GROOVED PINS. HALF-LENGTH TAPER GROOVED. (ISO 8745:1997). | |
| GROOVED PINS. ONE-THIRD-LENGTH CENTRE GROOVED. (ISO 8742:1997). | |
| Hexagon head bolts with metric fine pitch thread - Product grades A and B (ISO 8765:2011) | |
| Hexagon head screws with metric fine pitch thread - Product grades A and B (ISO 8676:2011) | |
| Hexagon nuts, style 1, with metric fine pitch thread. Product grades A and B. (ISO 8673:1999) | |
| Hexagon nuts, style 2, with metric fine pitch thread. Product grades A and B. (ISO 8674:1999). | |
| Hexagon thin nuts (chamfered) with metric fine pitch thread. Product grades A and B. (ISO 8675:1999). | |
| Human response to vibration - Measuring instrumentation (ISO 8041:2005) | |
| Human response to vibration - Measuring instrumentation (ISO 8041:2005/Cor 1:2007) | |
| Human response to vibration - Measuring instrumentation - Part 1: General purpose vibration meters (ISO 8041-1:2017) | |
| Hygrothermal performance of buildings and building materials - Physical quantities for mass transfer - Vocabulary (ISO 9346:2007) | |
| INFORMATION AND DOCUMENTATION. STATISTICS ON THE PRODUCTION AND DISTRIBUTION OF BOOKS, NEWPAPERS, PERIODICALS AND ELECTRONIC PUBLICATIONS. (ISO 9707:1991). | |
| Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO 8536-10:2015) | |
| Infusion equipment for medical use - Part 11: Infusion filters for single use with pressure infusion equipment (ISO 8536-11:2015) | |
| Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) | |
| Infusion equipment for medical use - Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact (ISO 8536-14:2016) | |
| Infusion equipment for medical use - Part 16: Infusion sets for single use with volumetric infusion controllers (ISO 8536-16:2025) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2025.) | |
| Infusion equipment for medical use - Part 1: Infusion glass bottles (ISO 8536-1:2011) | |
| Infusion equipment for medical use - Part 2: Closures for infusion bottles (ISO 8536-2:2010) | |
| Infusion equipment for medical use - Part 3: Aluminium caps for infusion bottles (ISO 8536-3:2009) | |
| Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) | |
| Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010/Amd 1:2013) | |
| Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed (ISO 8536-5:2004) | |
| Infusion equipment for medical use - Part 8: Infusion sets for single use with pressure infusion apparatus (ISO 8536-8:2015) | |
| Infusion equipment for medical use - Part 9: Fluid lines for single use with pressure infusion equipment (ISO 8536-9:2015) | |
| Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009) | |
| Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009/Amd 1:2015) | |
| Injection containers and accessories - Part 2: Closures for injection vials (ISO 8362-2:2008) | |
| Injection containers and accessories - Part 2: Closures for injection vials - Amendment 1 (ISO 8362-2:2015/Amd 1:2022) | |
| Injection containers and accessories - Part 3: Aluminium caps for injection vials (ISO 8362-3:2001) | |
| Injection containers and accessories - Part 4: Injection vials made of moulded glass (ISO 8362-4:2011) | |
| Injection containers and accessories - Part 5: Freeze drying closures for injection vials (ISO 8362-5:2016) | |
| Injection containers and accessories - Part 6: Caps made of aluminium-plastics combinations for injection vials (ISO 8362-6:2010) | |
| Injection containers and accessories - Part 7: Injection caps made of aluminium-plastics combinations without overlapping plastics part (ISO 8362-7:2006) | |
| Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) | |
| Injection equipment for medical use - Part 2: One-point-cut (OPC) ampoules (ISO 9187-2:2010) | |
| Jewellery - Colours of gold alloys - Definition, range of colours and designation (ISO 8654:2018) | |
| Jewellery - Fineness of precious metal alloys (ISO 9202:2014) | |
| Knitted fabrics - Types - Vocabulary (ISO 8388:1998) | |
| MANIPULATING INDUSTRIAL ROBOTS. COORDINATE SYSTEMS AMD MOTION NOMENCLATURES (ISO 9787:1999) (Endorsed by AENOR in November of 2000.) | |
| MANIPULATING INDUSTRIAL ROBOTS. MECHANICAL INTERFACES. PART 1: PLATES (FORM A) (ISO 9409-1:1996) (Endorsed by AENOR in November of 1997.) | |
| MANIPULATING INDUSTRIAL ROBOTS. MECHANICAL INTERFACES. PART 2: SHAFTS (FORM A) (ISO 9409-2:1996) (Endorsed by AENOR in November of 1997.) | |
| MANIPULATING INDUSTRIAL ROBOTS. PERFORMANCE CRITERIA AND RELATED TEST METHODS (ISO 9283:1998) | |
| MANIPULATING INDUSTRIAL ROBOTS. VOCABULARY. (ISO 8373:1994 + TECHNICAL CORRIGENDUM 1:1996). | |
| MATERIALS AND ARTICLES IN CONTACT WITH FOODSTUFFS. CUTLERY AND TABLE HOLLOWARE. PART 1: REQUIREMENTS FOR CUTLERY FOR THE PREPARATION OF FOOD. (ISO 8442-1:1997). | |
| Materials and articles in contact with foodstuffs. Cutlery and table holloware. Part 1: Requirements for cutlery for the preparation of food. (ISO 8442-1:1997) | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO... | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) | |
| Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch... | |
| Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators (ISO 80601-2-12:2011) (Endorsed by AENOR in June of 2011.) | |
| Medical electrical equipment - Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators - Technical Corrigendum 1 (ISO 80601-2-12:2011/Cor 1:2011) (Endorsed by AENOR in November... | |
| Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) | |
| Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2011) (Endorsed by AENOR in February of 2012.) | |
| Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors - Amendment 1 (ISO 80601-2-55:2018/Amd 1:2023) (Endorsed by Asociaci\xf3n Espa\xf1ola de... | |
| Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2009) | |
| Medical electrical equipment - Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement - Amendment 1 (ISO 80601-2-56:2017/Amd 1:2018) | |
| Medical electrical equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO 80601-2-69:2014) | |
| Medical electrical equipment - Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment (ISO 80601-2-79:2018) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in... | |
| Medical electrical equipment - Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency (ISO 80601-2-80:2018) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in... | |
| Medical electrical equipment - Part 2-84: Particular requirements for the basic safety and essential performance of ventilators for the emergency medical services environment (ISO 80601-2-84:2023) | |
| Metallic and other inorganic coatings - Phosphate conversion coating of metals (ISO 9717:2010) | |
| Metallic coatings - Measurement of coating thickness - Scanning electron microscope method (ISO 9220:1988) | |
| Metallic coatings - Review of methods of measurement of ductility (ISO 8401:2017) | |
| Metallic materials - Calibration of extensometer systems used in uniaxial testing (ISO 9513:2012, Corrected version 2015-06) | |
| Metallic materials - Calibration of extensometer systems used in uniaxial testing - Technical Corrigendum 1 (ISO 9513:2012/Cor 1:2013) | |
| Metallic materials - Tube (in full section) - Bend test (ISO 8491:1998) | |
| Metallic materials - Tube - Drift-expanding test (ISO 8493:1998) | |
| Metallic materials - Tube - Flanging test (ISO 8494:2013) | |
| Metallic materials - Tube - Flattening test (ISO 8492:2013) | |
| Metallic materials - Tube - Ring tensile test (ISO 8496:2013) | |
| Metallic materials - Tube - Ring-expanding test (ISO 8495:2013) | |
| Metallic tube connections for fluid power and general use - Part 1: 24 degree cone connectors (ISO 8434-1:2007) | |
| Microstructure of cast irons - Part 1: Graphite classification by visual analysis (ISO 945-1:2008) | |
| Microstructure of cast irons - Part 1: Graphite classification by visual analysis - Technical Corrigendum 1 (ISO 945-1:2008/Cor 1:2010) | |
| Milk - Determination of nitrogen content - Part 4: Determination of non-protein nitrogen content. (ISO 8968-4:2001) | |
| Milk - Determination of nitrogen content - Part 5: Determination of protein-nitrogen content. (ISO 8968-5:2001) | |
| Neutron reference radiation fields - Part 3: Calibration of area and personal dosemeters and determination of their response as a function of neutron energy and angle of incidence (ISO 8529-3:2023,... | |
| NICKEL-BASED ALLOYS. DETRMINATION OF RESISTANCE TO INTERGRANULAR CORROSION. (ISO 9400:1990). | |
| Non-destructive testing - Qualification and certification of NDT personnel (ISO 9712:2012) | |
| Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 2 (ISO 7963:2006) | |
| Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007) | |
| Non-invasive sphygmomanometers - Part 2: Clinical investigation of automated measurement type (ISO 81060-2:2013) | |
| Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 1 (ISO 81060-2:2018/Amd 1:2020) | |
| Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type - Amendment 2 (ISO 81060-2:2018/Amd 2:2024) | |
| Nonwovens - Test methods - Part 1: Determination of mass per unit area (ISO 9073-1:2023) | |
| Nonwovens - Test methods - Part 3: Determination of tensile strength and elongation at break using the strip method (ISO 9073-3:2023, Corrected version 2025-05) | |
| Ophthalmic optics - Spectacle frames - Lists of equivalent terms and vocabulary (ISO 7998:2005) (Endorsed by AENOR in August of 2006.) | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:2004/Cor.1:20 06) | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO 8980-1:2017) | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses (ISO 8980-2:2004/Cor.1:20 06) | |
| Ophthalmic optics - Uncut finished spectacle lenses - Part 3: Transmittance specifications and test methods (ISO 8980-3:2003) | |
| Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017) | |
| Ophthalmic optics and instruments - Near reading charts (ISO 7921:2024) | |
| OPHTHALMIC OPTICS. UNCUT FINISHED SPECTACLE LENSES. PART 2: SPECIFICATIONS FOR PROGRESSIVE POWER LENSES. (ISO 8980-2:1996). | |
| Optics and optical instruments - Reference wavelengths (ISO 7944:1998) | |
| Optics and optical instruments - Test lenses for calibration of focimeters - Part 1: Test lenses for focimeters used for measuring spectacle lenses (ISO 9342-1:2005) | |
| Optics and optical instruments - Test lenses for calibration of focimeters - Part 2: Test lenses for focimeters used for measuring contact lenses (ISO 9342-2:2005) (Endorsed by AENOR in October... | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. DETERMINATION OF CYTOTOXICITY OF CONTACT LENS MATERIAL. PART 1: AGAR OVERLAY TEST AND GROWTH INHIBITION TEST (ISO 9363-1:1994) | |
| OPTICS AND OPTICAL INSTRUMENTS. CONTACT LENSES. DETERMINATION OF STRAINS FOR RIGID CONTACT LENSES. (ISO 9340:1996). | |
| OPTICS AND OPTICAL INSTRUMENTS. VISUAL ACUITY TESTING. METHOD OF CORRELATING OPTOTYPES. (ISO 8597:1994, INCLUDING TECHNICAL CORRIGENDUM 1:1995). | |
| Oxygen concentrators for medical use - Safety requirements (ISO 8359:1996) | |
| Oxygen concentrators for medical use - Safety requirements - Amendment 1 (ISO 8359:1996/Amd 1:2012) | |
| Packaging - Distribution packaging - Graphical symbols for handling and storage of packages (ISO 780:2015) | |
| Packaging - Drop test - Part 1: Paper sacks (ISO 7965-1:2024) | |
| Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) | |
| Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) | |
| Paints and varnishes - Drying tests - Part 2: Pressure test for stackability (ISO 9117-2:2010) | |
| Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) | |
| Paints and varnishes - Drying tests - Part 4: Test using a mechanical recorder (ISO 9117-4:2012) | |
| Paints and varnishes - Drying tests - Part 5: Modified Bandow-Wolff test (ISO 9117-5:2012) | |
| Paints and varnishes - Drying tests - Part 6: Print-free test (ISO 9117-6:2012) | |
| Pallets for materials handling - Flat pallets - Part 2: Performance requirements and selection of tests (ISO 8611-2:2011/Amd 1:2016) | |
| Paper and board - Measurement of specular gloss - Part 2: 75\xb0 gloss with a parallel beam, DIN method (ISO 8254-2:2003) | |
| PARALLEL PINS WITH INTERNAL THREAD, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL. (ISO 8735:1997). | |
| PARALLEL PINS WITH INTERNAL THREAD, OF UNHARDENED STEEL OR AUSTENITIC STAINLESS STEEL. (ISO 8733:1997). | |
| PARALLEL PINS, OF HARDENED STEEL OR MARTENSITIC STAINLESS STEEL (DOWEL PINS). (ISO 8734:1997). | |
| PIGMENTS AND EXTENDERS. METHODS OF ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 1: ASSESSMENT FROM THE CHANGE IN TINTING STRENGH OF COLOURED PIGMENTS. (ISO 8781-1:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 2: ASSESSMENT FROM THE CHANGE IN FINENESS OF GRIND. (ISO 8781-2:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 3: ASSESSMENT FROM THE CHANGE IN GLOSS. (ISO 8781-3:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 1: INTRODUCTION. (ISO 8780-1:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 2: DISPERSION USING A OSCILLATORY SHAKING MACHINE. (ISO 8780-2:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 3: DISPERSION USING A HIGH-SPEED IMPELLER MILL. (ISO 8780-3:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 4: DISPERSION USING A BEAD MILL. (ISO 8780-4:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 5: DISPERSION USING AN AUTOMATIC MULLER. (ISO 8780-5:1990). | |
| PIGMENTS AND EXTENDERS. METHODS OF DISPERSION FOR ASSESSMENT OF DISPERSION CHARACTERISTICS. PART 6: DISPERSION USING A TRIPLE-ROLL MILL. (ISO 8780-6:1990). | |
| Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002/Cor 1:2008) | |
| Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations. (ISO 8655-1:2002) | |
| Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002) | |
| Piston-operated volumetric apparatus - Part 2: Piston pipettes (ISO 8655-2:2002/Cor 1:2008) | |
| Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002) | |
| Piston-operated volumetric apparatus - Part 6: Gravimetric methods for the determination of measurement error (ISO 8655-6:2002/Cor 1:2008) | |
| Piston-operated volumetric apparatus - Part 7: Alternative measurement procedures for the determination of volume - Amendment 1 (ISO 8655-7:2022/Amd 1:2024) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2025.)... | |
| Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance (ISO 8655-7:2005) | |
| Piston-operated volumetric apparatus - Part 7: Non-gravimetric methods for the assessment of equipment performance (ISO 8655-7:2005/Cor 1:2008) | |
| Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000/Cor. 1:2006) | |
| Plain washers for metric bolts, screws and nuts for general purposes - General plan. (ISO 887:2000). | |
| PLASTICS - AMINE EPOXIDE HARDENERS - DETERMINATION OF PRIMARY, SECONDARY AND TERTIARY AMINE GROUP NITROGEN CONTENT (ISO 9702:1996) | |
| Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source (ISO 9773:1998) | |
| Plastics - Determination of burning behaviour of thin flexible vertical specimens in contact with a small-flame ignition source - Amendment 1: Specimens (ISO 9773:1998/Amd 1:2003) | |
| Plastics - Determination of creep behaviour - Part 1: Tensile creep - Amendment 1 (ISO 899-1:2003/Amd 1:2015) | |
| Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading - Amendment 1 (ISO 899-2:2003/Amd 1:2015) | |
| Plastics - Ethylene/vinyl acetate copolymer (EVAC) thermoplastics - Determination of vinyl acetate content (ISO 8985:1998) | |
| Plastics - Evaluation of the action of microorganisms (ISO 846:1997) | |
| Plastics - Methods of exposure to solar radiation - Part 1: General guidance (ISO 877-1:2009) | |
| Plastics - Methods of exposure to solar radiation - Part 2: Direct weathering and exposure behind window glass (ISO 877-2:2009) | |
| Plastics - Methods of exposure to solar radiation - Part 3: Intensified weathering using concentrated solar radiation (ISO 877-3:2009) | |
| Plastics - Phenolic resin powder - Determination of flow distance on a heated glass plate (ISO 8619:2003) | |
| Plastics - Phenolic resins - Determination of hexamethylenetetrami ne content - Kjeldahl method, perchloric acid method and hydrochloric acid method (ISO 8988:2006) | |
| Plastics - Phenolic resins - Determination of reactivity on a B-transformation test plate (ISO 8987:2005) | |
| Plastics - Phenolic resins - Determination of residual phenol content by gas chromatography. (ISO 8974:2002) | |
| Plastics - Phenolic resins - Determination of the gel time at a given temperature using automatic apparatus. (ISO 9396:1997) | |
| Plastics - Phenolic resins in the liquid state or in solution - Determination of viscosity (ISO 9371:1990) | |
| Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998) | |
| Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8257-2:2001) | |
| Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 1: Cast sheets (ISO 7823-1:2003) | |
| Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 2: Extruded sheets (ISO 7823-2:2003) | |
| Plastics - Poly(methyl methacrylate) sheets - Types, dimensions and characteristics - Part 3: Continuous cast sheets (ISO 7823-3:2007) | |
| Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8986-1:2009) | |
| Plastics - Polybutene-1 (PB-1) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 8986-2:2009) | |
| PLASTICS - THERMOSETTING MOULDING MATERIALS - DETERMINATION OF TRANSFER FLOW (ISO 7808:1992) | |
| Plastics and ebonite - Determination of indentation hardness by means of a durometer (Shore hardness) (ISO 868:2003) | |
| Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) | |
| Plastics piping and ducting systems - Determination of the long-term hydrostatic strength of thermoplastics materials in pipe form by extrapolation (ISO 9080:2012) | |
| Plastics piping systems for the transport of water intended for human consumption - Migration assessment - Determination of migration values of plastics pipes and fittings and their joints. (ISO 8795:2001)... | |
| PLASTICS. DETERMINATION OF CREEP BEHAVIOUR. PART 1: TENSILE CREEP (ISO 899-1:1993). | |
| PLASTICS. DETERMINATION OF CREEP BEHAVIOUR. PART 2: FLEXURAL CREEP BY THREE-POINT LOADING. (ISO 899-2:1993). | |
| PLASTICS. DETERMINATION OF TENSILE-IMPACT STRENGTH. (ISO 8256:1990, INCLUDING TECHNICAL CORRIGENDUM 1:1991). | |
| PLASTICS. LIQUID PHENOLIC RESINS. DETERMINATION OF WATER MISCIBILITY. (ISO 8989:1995). | |
| PLASTICS. PHENOLIC RESIN POWDER. SIEVE ANALYSIS USING AIR-JET SIEVE APPARATUS. (ISO 8620:1986). | |
| PLASTICS. PHENOLIC RESINS. DETERMINATION OF PH (ISO 8975:1989). | |
| PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINT AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 3: ASSESSMENT OF DUST ON STEEL SURFACES PREPARED FOR... | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINT AND RELATED PRODUCTS - TESTS FOR THE ASSESSMENT OF SURFACE CLEANLINESS - PART 4: GUIDANCE ON THE ESTIMATION OF THE PROBABILITY OF... | |
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 1: General principles. (ISO 8504-1:2000) | |
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 3: Hand- and power-tool cleaning. (ISO 8504-3:1993) | |
| Preparation of steel substrates before application of paints and related products - Surface preparation methods - Part 4: Acid pickling (ISO 8504-4:2022) | |
| Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: Field method for the turbidimetric determination of water-soluble... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 12: Field method for the titrimetric determination of water-soluble... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 15: Extraction of soluble contaminants for analysis by acid... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 2: Laboratory determination of chloride on cleaned surfaces (ISO... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 5: Measurement of chloride on steel surfaces prepared for... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 6: Extraction of soluble contaminants for analysis - The... | |
| Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 8: Field method for the refractometric dedetermination of moisture... | |
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and... | |
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 2: Preparation grades of previously coated steel substrates after localized removal... | |
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 3: Preparation grades of welds, edges and other areas with surface... | |
| Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 4: Initial surface conditions, preparation grades and flash rust grades in... | |
| Preparation of steel substrates before application of paints and related products. Tests for the assessment of surface cleanliness. Part 9: Field method for the conductometric determination of water-soluble salts. (ISO... | |
| Protective clothing - Assessment of resistance of materials to molten metal splash (ISO 9185:2007) | |
| Protective clothing against heat and flame - Determination of heat transmission on exposure to flame (ISO 9151:2016, Corrected version 2017-03) | |
| Qualification test of welders-Fusion welding-Part 2: Aluminium and aluminium alloys (ISO 9606-2:2004) | |
| Qualification testing of welders - Fusion welding - Part 1: Steels (ISO 9606-1:2012 including Cor 1:2012) | |
| QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS. PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE. (ISO 9000-3:1997). | |
| Quality management systems - Fundamentals and vocabulary - (ISO 9000:2005) | |
| Quality management systems - Requirements (ISO 9001:2015) | |
| Quality management systems - Requirements - Amendment 1: Climate action changes (ISO 9001:2015/Amd 1:2024) | |
| Quality management systems. Guidelines for performance improvements. (ISO 9004:2000) | |
| Quantities and units - Part 1: General (ISO 80000-1:2009 + Cor 1:2011) | |
| Railway Applications - Coating of passenger rail vehicle (ISO 9466:2025) | |
| RAPESEED. DETERMINATION OF GLUCOSINOLATES CONTENT. PART 2: METHOD USING X-RAY FLUORESCENCE SPECTROMETRY. (ISO 9167-2:1994). | |
| Reaction to fire tests for floorings - Part 1: Determination of the burning behaviour using a radiant heat source (ISO 9239-1:2010) | |
| Reciprocating internal combustion engine driven alternating current generating sets - Part 13: Safety (ISO 8528-13:2016, Corrected version 2016-10-15) | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 1: TEST-BED MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS. (ISO 8178-1:1996). | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 2: MEASUREMENT OF GASEOUS AND PARTICULATE EXHAUST EMISSIONS AT SITE (ISO 8178-2:1996). | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 4: TEST CYCLES FOR DIFFERENT ENGINE APPLICATIONS. (ISO 8178-4:1996). | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 5: TEST FUELS. (ISO 8178-5:1997). | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. EXHAUST EMISSION MEASUREMENT. PART 5: TEST FUELS. (ISO 8178-5:1997) | |
| Reciprocating internal combustion engines. Exhaust emission measurement. Part 6: Report of measuring results and test. (ISO 8178-6:2000) | |
| Refractory materials - Determination of bulk density of granular materials (grain density) (ISO 8840:2021) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Requirements for the training of scientific divers - Part 1: Scientific divers (ISO 8804-1:2024) | |
| Requirements for the training of scientific divers - Part 2: Advanced scientific divers (ISO 8804-2:2024) | |
| Requirements for the training of scientific divers - Part 3: Scientific diving project leader (ISO 8804-3:2024) | |
| Resistance spot welding - Electrode holders - Part 1: Taper fixing 1:10 (ISO 8430-1:2016) | |
| Resistance spot welding - Electrode holders - Part 2: Morse taper fixing (ISO 8430-2:2016) | |
| Resistance spot welding - Electrode holders - Part 3: Parallel shank fixing for end thrust (ISO 8430-3:2016) | |
| Resistance welding - Procedure for the evaluation of the life of spot welding electrodes using constant machine settings (ISO 8166:2003) | |
| Resistance welding equipment - Insulated pins for use in electrode back-ups (ISO 9312:2013) | |
| Respiratory tract humidifiers for medical use - Particular requirements for respiratory humidification systems (ISO 8185:2007) | |
| Rigid cellular plastics - Determination of compression properties (ISO 844:2014) | |
| Road vehicles - Connections for on-board electrical wiring harnesses - Part 2: Definitions, test methods and general performance requirements (ISO 8092-2:2005) (Endorsed by AENOR in August of 2006.) | |
| Rubber and plastics hose assemblies - Flexing combined with hydraulic impulse test (half-omega test) (ISO 8032:1997) | |
| Rubber and plastics hoses - Determination of adhesion between components (ISO 8033:2016) | |
| Rubber and plastics hoses - Method of test for flammability (ISO 8030:2014) | |
| Rubber and plastics hoses and hose assemblies - Determination of electrical resistance and conductivity (ISO 8031:2009) | |
| Rubber and plastics hoses and hose assemblies - Guidelines for selection, storage, use and maintenance (ISO 8331:2014) | |
| Rubber and plastics hoses and hose assemblies - Vocabulary (ISO 8330:2014) | |
| Rubber and plastics hoses and tubing - Determination of transmission of liquids through hose and tubing walls (ISO 8308:2006) | |
| Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:1999) | |
| RUBBER- OR PLASTICS-COATED FABRICS. DETERMINATION OF RESISTANCE TO DAMAGE BY FLEXING. (ISO 7854:1995). | |
| Safety requirements for dry-cleaning machines - Part 1: Common safety requirements (ISO 8230-1:2008) | |
| Safety requirements for dry-cleaning machines - Part 2: Machines using perchloroethylene (ISO 8230-2:2008) | |
| Safety requirements for dry-cleaning machines - Part 3: Machines using combustible solvents (ISO 8230-3:2008) | |
| Sensory analysis - General guidelines for the selection, training and monitoring of selected assessors and expert sensory assessors (ISO 8586:2012) | |
| Ships and marine technology - Single rungs and rungs for dog-step ladders (ISO 9519:2023) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2023.) | |
| SHIPS AND MARINE TECHNOLOGY. DREDGERS. VOCABULARY. (ISO 8384:2000) | |
| SHIPS AND MARINE TECHNOLOGY. MARINE GYRO-COMPASSES. (ISO 8728:1997). | |
| SHIPS AND MARINE TECHNOLOGY. MARINE RADAR REFLECTORS. (ISO 8729:1997) | |
| Ships and marine technology. Ventilation of cargo spaces where vehicles with internal combustion engines are driven. Calculation of theoretical total airflow required. (ISO 9785:2002) | |
| Small bore connectors for liquids and gases in healthcare applications - Part 1: General requirements (ISO 80369-1:2010) | |
| Small bore connectors for liquids and gases in healthcare applications - Part 6: Connectors for neuraxial applications (ISO 80369-6:2016, Corrected version 2016-11-15) | |
| Small craft - Electric fans (ISO 9097:1991) | |
| Small craft - Electrical devices - Protection against ignition of surrounding flammable gases (ISO 8846:1990) | |
| Small craft - Electrically operated direct-current bilge-pumps (ISO 8849:2003) | |
| Small craft - Fire protection (ISO 9094:2015) | |
| Small craft - Fire protection - Part 1: Craft with a hull length of up to and including 15 m (ISO 9094-1:2003) | |
| Small craft - Fire protection - Part 2: Craft with a hull length of over 15 m (ISO 9094-2:2002) | |
| Small craft - Fire-resistant fuel hoses (ISO 7840:2013) | |
| Small craft - Marine propulsion reciprocating internal combustion engines - Power measurements and declarations (ISO 8665:2006) | |
| Small craft - Non-fire-resistant fuel hoses (ISO 8469:2013) | |
| Small craft - Power measurements and declarations - Part 2: Electric marine propulsion (ISO 8665-2:2024) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2024.) | |
| Small craft - Principal data (ISO 8666:2016) | |
| Small craft - Principal data (ISO 8666:2020) | |
| Small craft - Remote steering systems (ISO 8848:1990) | |
| Small craft - Remote steering systems for single outboard motors of 15 kW to 40 kW power (ISO 9775:1990) | |
| Small craft - Seacocks and through-hull fittings - Part 1: Metallic (ISO 9093-1:1994) | |
| Small craft - Seacocks and through-hull fittings - Part 2: Non-metallic (ISO 9093-2:2002) | |
| Small craft - Steering gear - Cable and pulley systems (ISO 8847:2004) | |
| Small craft - Toilet waste retention systems (ISO 8099:2000) | |
| Small craft - Waste systems - Part 1: Waste water retention (ISO 8099-1:2018) | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO 80369-20:2015) | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 2: Connectors for respiratory applications (ISO 80369-2:2024, Corrected version 2025-06) | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO 80369-3:2016) | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO 80369-3:2016/Amd 1:2019) | |
| Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) | |
| Soft solder alloys - Chemical compositions and forms (ISO 9453:2014) | |
| Soft soldering fluxes - Classification and requirements - Part 1: Classification, labelling and packaging (ISO 9454-1:2016) | |
| SOFT SOLDERING FLUXES - CLASSIFICATION AND REQUIREMENTS - PART 2: PERFORMANCE REQUIREMENTS (ISO 9454-2:1998) | |
| Soft soldering fluxes - Test methods - Part 10: Flux efficacy test, solder spread method (ISO 9455-10:2012) | |
| Soft soldering fluxes - Test methods - Part 11: Solubility of flux residues (ISO 9455-11:2017) | |
| SOFT SOLDERING FLUXES - TEST METHODS - PART 13: DETERMINATION OF FLUX SPATTERING (ISO 9455-13:1996) | |
| Soft soldering fluxes - Test methods - Part 14: Assessment of tackiness of flux residues (ISO 9455-14:2017) | |
| SOFT SOLDERING FLUXES - TEST METHODS - PART 15: COPPER CORROSION TEST (ISO 9455-15:1996) | |
| Soft soldering fluxes - Test methods - Part 16: Flux efficacy test, wetting balance method (ISO 9455-16:2013) | |
| Soft soldering fluxes - Test methods - Part 17: Surface insulation resistance comb test and electrochemical migration test of flux residues (ISO 9455-17:2002) | |
| Soft soldering fluxes - Test methods - Part 3: Determination of acid value, potentiometric and visual titration methods (ISO 9455-3:1992) | |
| Soft soldering fluxes - Test methods - Part 5: Copper mirror test (ISO 9455-5:2014) | |
| Soft soldering fluxes - Test methods - Part 6: Determination and detection of halide (excluding fluoride) content (ISO 9455-6:1995) | |
| Soft soldering fluxes - Test methods - Part 9: Determination of ammonia content (ISO 9455-9:1993) | |
| SOFT SOLDERING FLUXES. TEST METHODS. PART 12: STEEL TUBE CORROSION TEST. (ISO 9455-12:1992). | |
| SOFT SOLDERING FLUXES. TEST METHODS. PART 2: DETERMINATION OF NON-VOLATILE MATTER, EBULLIOMETRIC METHOD. (ISO 9455-2:1993). | |
| Spring-type straight pins - Coiled, heavy duty (ISO 8748:2007) | |
| Spring-type straight pins - Coiled, light duty (ISO 8751:2007) | |
| Spring-type straight pins - Coiled, standard duty (ISO 8750:2007) | |
| Spring-type straight pins - Slotted, heavy duty (ISO 8752:2009) | |
| Stainless steel needle tubing for the manufacture of medical devices - Requirements and test methods (ISO 9626:2016) | |
| Steel - Determination of aluminium content - Flame atomic absorption spectrometric method (ISO 9658:2024) | |
| Steel and iron - Determination of total carbon content - Infrared absorption method after combustion in an induction furnace. (ISO 9556:1989) | |
| Sterile hypodermic needles for single use - Requirements and test methods (ISO 7864:2016) | |
| Sterile hypodermic syringes for single use - Part 1: Syringes for manual use (ISO 7886-1:1993, including Technical Corrigendum 1:1995) | |
| Sterile hypodermic syringes for single use - Part 2: Syringes for use with power-driven syringe pumps (ISO 7886-2:1996) | |
| Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization (ISO 7886-3:2005) | |
| Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO 7886-4:2006) | |
| Sterile single-use syringes, with or without needle, for insulin (ISO 8537:2016) | |
| Suction catheters for use in the respiratory tract (ISO 8836:2014) | |
| Tall-oil fatty acids for paints and varnishes - Test methods and characteristic values (ISO 8623:2015) | |
| Technical drawings - Construction drawings - Representation of modular sizes, lines and grids (ISO 8560:1986) | |
| Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO 9170-1:2008) | |
| Terminal units for medical gas pipeline systems - Part 2: Terminal units for anaesthetic gas scavenging systems (ISO/FDIS 9170-2:2008) | |
| Textile floor coverings - Assessment of changes in appearance (ISO 9405:2015) | |
| Textiles - Nonwoven - Definition (ISO 9092:2011) | |
| Textiles - Test methods for nonwovens - Part 10: Lint and other particles generation in the dry state (ISO 9073-10:2003) | |
| Textiles - Test methods for nonwovens - Part 11: Run-off (ISO 9073-11:2002) | |
| Textiles - Test methods for nonwovens - Part 12: Demand absorbency (ISO 9073-12:2002) | |
| Textiles - Test methods for nonwovens - Part 13: Repeated liquid strike-through time (ISO 9073-13:2006) | |
| Textiles - Test methods for nonwovens - Part 14: Coverstock wetback (ISO 9073-14:2006) | |
| Textiles - Test methods for nonwovens - Part 15: Determination of air permeability (ISO 9073-15:2007) | |
| Textiles - Test methods for nonwovens - Part 16: Determination of resistance to penetration by water (hydrostatic pressure) (ISO 9073-16:2007) | |
| Textiles - Test methods for nonwovens - Part 17: Determination of water penetration (spray impact) (ISO 9073-17:2008) | |
| Textiles - Test methods for nonwovens - Part 18: Determination of breaking strength and elongation of nonwoven materials using the grab tensile test (ISO 9073-18:2007) | |
| Textiles - Test methods for nonwovens - Part 4: Determination of tear resistance (ISO 9073-4:1997) | |
| Textiles - Test methods for nonwovens - Part 5:Determination of resistance to mechanical penetration (ball burst procedure) (ISO 9073-5:2008) | |
| Textiles - Test methods for nonwovens - Part 6: Absorption (ISO 9073-6:2000) | |
| Textiles - Test methods for nonwovens - Part 7: Determination of bending length (ISO 9073-7:1995) | |
| Textiles - Test methods for nonwovens - Part 9: Determination of drapability including drape coefficient (ISO 9073-9:2008) | |
| TEXTILES. DETERMINATION OF PERMEABILITY OF FABRICS TO AIR. (ISO 9237:1995). | |
| TEXTILES. TEST METHOD FOR NONWOVENS. PART 8: DETERMINATION OF LIQUID STRIKE-THROUGH TIME (SIMULATED URINE). (ISO 9073-8:1995). | |
| TEXTILES. TEST METHODS FOR NONWOVENS. PART 2: DETERMINATION OF THICKNESS. (ISO 9073-2:1995). | |
| Thermal cutting - Classification of thermal cuts - Geometrical product specification and quality tolerances (ISO 9013:2003) | |
| Thermal cutting. Classification of thermal cuts. Geometrical product specification and quality tolerances. (ISO 9013:2002) | |
| Thermal insulation - Vocabulary (ISO 9229:2007) | |
| THERMAL INSULATION. DETERMINATION OF STEADY-STATE THERMAL TRANSMISSION PROPERTIES OF THERMAL INSULATION FOR CIRCULAR PIPES. (ISO 8497:1994). | |
| THERMAL INSULATION. DETERMINATION OF STEADY-STATE THERMAL TRANSMISSION PROPERTIES. CALIBRATED AND GUARDED HOT BOX (ISO 8990:1994). | |
| THERMAL INSULATION. HEAT TRANSFER BY RADIATION. PHYSICAL QUANTITIES AND DEFINITIONS (ISO 9288:1989). | |
| THERMAL INSULATION. HEAT TRANSFER CONDITIONS AND PROPERTIES OF MATERIALS. VOCABULARY. (ISO 9251:1987). | |
| Thermoplastics valves - Torque - Test method (ISO 8233:2024) | |
| Unplasticized poly(vinyl chloride) (PVC-U) pipes - Dichloromethane resistance at specified temperature (DCMT) - Test method (ISO 9852:2007) | |
| Vitreous and porcelain enamels - Low voltage test for detecting and locating defects (ISO 8289:2000) | |
| Water quality - Biological classification of rivers - Part 1: Guidance on the interpretation of biological quality data from surveys of benthic macroinvertebrates. (ISO 8689-1:2000) | |
| Water quality - Biological classification of rivers - Part 2: Guidance on the presentation of biological quality data from surveys of benthic macroinvertebrates. (ISO 8689-2:2000) | |
| Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 3: Miniaturized method (Most Probable Number) for the detection and enumeration of E.coli in surface and... | |
| Water quality - Detection and enumeration of intestinal enterococci - Part 1: Miniaturized method (Most Probable Number) for surface and waste water (ISO 7899-1:1998) | |
| Water quality - Detection and enumeration of intestinal enterococci - Part 2: Membrane filtration method. (ISO 7899-2:2000) | |
| WATER QUALITY - DETECTION AND ENUMERATION OF INTESTINAL ENTEROCOCCI. PART 1: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR SURFACE AND WASTE WATER (ISO 7899-1:1998) | |
| Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO 9308-1:2014) | |
| Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO 9308-1:2014/Amd 1:2016) | |
| Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 2: Most probable number method (ISO 9308-2:2012) | |
| Water quality - Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium - Method by analysis of dissolved organic carbon (DOC) (ISO 7827:2010) | |
| Water quality - Fresh water algal growth inhibition test with unicellular green algae (ISO 8692:2012) | |
| Water quality - General guidance on the enumeration of micro-organisms by culture (ISO 8199:2005) | |
| Water quality - Gross alpha activity - Test method using thick source (ISO 9696:2017) | |
| Water quality - Gross beta activity in non-saline water - Test method using thick source (ISO 9697:2015) | |
| Water quality - Test for inhibition of oxygen consumption by activated sludge for carbonaceous and ammonium oxidation (ISO 8192:2007) | |
| Water quality - Toxicity test for assessing the inhibition of nitrification of activated sludge microorganisms (ISO 9509:2006) | |
| WATER QUALITY. DETECTION AND ENUMERATION OF ESCHERICHIA COLI AND COLIFORM BACTERIA. PART 3: MINIATURIZED METHOD (MOST PROBABLE NUMBER) FOR THE DETECTION AND ENUMERATION OF E. COLI IN SURFACE AND WASTE... | |
| Water quality. Evaluation of ultimate aerobic biodegradability of organic compounds in aqueous medium by determintation of oxygen demand in a closed respirometer (ISO 9408:1999) | |
| WATER QUALITY. EVALUATION OF ULTIMATE AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS IN AQUEOUS MEDIUM. CARBON DIOXIDE EVOLUTION TEST. (ISO 9439:1999) | |
| Water-cooled secondary connection cables for resistance welding - Part 2: Dimensions and requirements for single-conductor connection cables (ISO 8205-2:2002) | |
| Water-cooled secondary connection cables for resistance welding - Part 3: Test requirements (ISO 8205-3:2012) | |
| Water-cooled secondary connection cables for resistance welding. Part 1: Dimensions and requirements for double-conductor connection cables. (ISO 8205-1:2002) | |
| Welding - Determination of Ferrite Number (FN) in austenitic and duplex ferritic-austenitic Cr-Ni stainless steel weld metals (ISO 8249:2000) | |
| Welding and allied processes - Joint preparation - Part 2: Submerged arc welding of steels (ISO 9692-2:1998) | |
| Welding and allied processes - Recommendations for joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys | |
| Welding and allied processes - Recommendations for joint preparation - Part 4: Clad steels (ISO 9692-4:2003) | |
| Welding and allied processes - Types of joint preparation - Part 1: Manual metal arc welding, gas-shielded metal arc welding, gas welding, TIG welding and beam welding of steels (ISO... | |
| Welding and allied processes - Types of joint preparation - Part 3: Metal inert gas welding and tungsten inert gas welding of aluminium and its alloys (ISO 9692-3:2016) |
| << Prev | Next >> |