Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
1000
1250
1300
1350
1400
1450
1500
1510
1520
1530
1540
1550
1560
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1580
1590
1600
1610
1620
| Product Name | Notes |
|---|---|
| Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) | |
| Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997) | |
| Acoustics - Determination of sound power radiated into a duct by fans and other air-moving devices - In-duct method (ISO 5136:2003) | |
| Acoustics - Determination of uncertainties associated with sound emission measures - Part 1: Sound power levels determined from sound pressure measurements (ISO 5114-1:2024) | |
| Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994) | |
| Acoustics - Hearing protectors - Part 2: Estimation of effective A-weighted sound pressure levels when hearing protectors are worn (ISO 4869-2:1994/Cor 1:2006) | |
| Acoustics - Hearing protectors - Part 3: Measurement of insertion loss of ear-muff type protectors using an acoustic test fixture (ISO 4869-3:2007) | |
| Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss (ISO 7235:2003) | |
| Acoustics - Measurement of airborne noise emitted by information technology and telecommunications equipment (ISO 7779:2010) | |
| Acoustics - Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (ISO 6926:2000) | |
| Acoustics - Statistical distribution of hearing threshold as a function of age (ISO 7029:2000) | |
| Acoustics - Statistical distribution of hearing thresholds related to age and gender - Amendment 1: Correction of parameter values for estimating the hearing threshold distribution (ISO 7029:2017/Amd 1:2024) | |
| ACOUSTICS. HEARING PROTECTORS. PART 4: MEASUREMENT OF EFFECTIVE SOUND PRESSURE LEVELS FOR LEVEL-DEPENDENT SOUND-RESTORATION EAR-MUFFS. (ISO/TR 4869-4:1998) | |
| Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of trowel notch sizes (ISO 6076:2023, Corrected version 2023-09) | |
| Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012) | |
| Anaesthetic and respiratory equipment - Laryngoscopes for tracheal intubation (ISO 7376:2009) | |
| Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases (ISO 5359:2014) | |
| Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases - Amendment 1 (ISO 5359:2014/Amd 1:2017). | |
| Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2008) | |
| Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) | |
| Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016) | |
| Anaesthetic reservoir bags (ISO 5362:2006) | |
| Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2012) | |
| Animal and vegetable fats and oils - Determination of acid value and acidity - Amendment 1: Precision data for virgin olive oil (ISO 660:1996/Amd 1:2003) (Endorsed by AENOR in August... | |
| Animal and vegetable fats and oils - Determination of anisidine value (ISO 6885:2006) | |
| Animal and vegetable fats and oils - Determination of conventional mass per volume (litre weight in air) (ISO 6883:2017) | |
| Animal and vegetable fats and oils - Determination of insoluble impurities content (ISO 663:2007) | |
| Animal and vegetable fats and oils - Determination of moisture and volatile matter content. (ISO 662:1998) | |
| Animal and vegetable fats and oils - Determination of oxidative stability (accelerated oxidation test) (ISO 6886:2006) | |
| Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000/Cor.1:2006 ) | |
| Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2017) | |
| Animal and vegetable fats and oils - Preparation of test sample (ISO 661:2003) (Endorsed by AENOR in August of 2006.) | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005) (Endorsed by AENOR in August of 2006.) | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion/steam distillation method (ISO 5983-2:2005) (Endorsed by AENOR in August of 2006.)... | |
| Anodizing of aluminium and its alloys - General specifications for anodic oxidation coatings on aluminium (ISO 7599:2010) | |
| Anodizing of aluminium and its alloys - Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees... | |
| Arc welding and cutting - Nonconsumable tungsten electrodes - Classification (ISO 6848:2015) | |
| Assembly tools for screws and nuts - Hand torque tools - Part 1: Requirements and methods for design conformance testing and quality conformance testing: minimum requirements for declaration of conformance... | |
| Assembly tools for screws and nuts - Hand torque tools - Part 2: Requirements for calibration and determination of measurement uncertainty (ISO 6789-2:2017) | |
| Automatic steam traps - Marking (ISO 6553:2016) | |
| Automatic steam traps - Production and performance characteristic tests (ISO 5117:2023) | |
| Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2008) | |
| Binders for paints and varnishes - Alkyd resins - Part 1: General methods of test (ISO 6744-1:1999) | |
| Binders for paints and varnishes - Alkyd resins - Part 2: Determination of phthalic anhydride content (ISO 6744-2:1999) | |
| Binders for paints and varnishes - Alkyd resins - Part 3: Determination of unsaponifiable matter content (ISO 6744-3:1999) | |
| Binders for paints and varnishes - Alkyd resins - Part 4: Determination of fatty acid content (ISO 6744-4:1999) | |
| Binders for paints and varnishes - Epoxy resins - General methods of test (ISO 7142:1984) | |
| Binders for paints and varnishes - Methods of test for characterizing water-based binders (ISO 7143:2007) | |
| BONDED ABRASIVE PRODUCTS - PERMISSIBLE UNBALANCES OF GRINDING WHEELS AS DELIVERED - TESTING (ISO 6103:1999) (Endorsed by AENOR in June of 2000.) | |
| Building components and building elements - Thermal resistance and thermal transmittance - Calculation method (ISO 6946:2007) | |
| Button head screws - Part 1: Hexagon socket button head screws (ISO 7380-1:2011) | |
| Button head screws - Part 2: Hexagon socket button head screws with collar (ISO 7380-2:2011) | |
| Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) (Endorsed by AENOR in August of 2006.) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements - Amendment 1 (ISO 5840-1:2021/Amd 1:2025) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2025.) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes - Amendment 1 (ISO 5840-2:2021/Amd 1:2025) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2025.)... | |
| Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques - Amendment 1 (ISO 5840-3:2021/Amd 1:2025) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May... | |
| Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO 7199:2009 + Amd 1:2012) | |
| Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) - Amendment 1: Connectors (ISO 7199:2016/Amd 1:2020) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in May of 2020.) | |
| Cardiovascular implants and extracorporeal systems - Vascular prostheses - Tubular vascular grafts and vascular patches (ISO 7198:2016) | |
| Cellular rubbers and plastics - Determination of dynamic cushioning performance - Amendment 1 (ISO 4651:1988/Amd 1:2006) | |
| Cereals and cereal products - Determination of moisture content - Part 1: Reference method (ISO 712-1:2024) | |
| Cereals and cereal products - Determination of moisture content - Part 2: Automatic drying oven method (ISO 712-2:2024) | |
| Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method (ISO 5943:2004) (Endorsed by AENOR in August of 2006.) | |
| Chemical analysis of steel - Order of listing elements in steel standards (ISO 6306:2020) | |
| Clear liquids - Estimation of colour by the Gardner colour scale (ISO 4630:2015) | |
| Clear liquids - Estimation of colour by the Gardner colour scale - Part 1: Visual method (ISO 4630-1:2004) | |
| Clear liquids - Estimation of colour by the Gardner colour scale - Part 2: Spectrophotometric method (ISO 4630-2:2004) | |
| Clear liquids - Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015) | |
| Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method (ISO 6271-1:2004) | |
| Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method (ISO 6271-2:2004) | |
| Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements... | |
| Construction drawings - Indication of limit deviations (ISO 6284:1996) | |
| Conveyor belts - Method for the determination of the tear propagation resistance of textile conveyor belts (ISO 505:2017) | |
| Conveyor belts - Transverse flexibility (troughability) - Test method (ISO 703:2007) | |
| Cooper-bearing intra-uterine contraceptive devices. Requirements, tests. (ISO 7439:2002) | |
| Corrosion of metals and alloys - Determination of bimetallic corrosion in atmospheric exposure corrosion tests (ISO 7441:2015) | |
| Corrosion of metals and alloys - Stress corrosion cracking - Part 11: Guidelines for testing the resistance of metals and alloys to hydrogen embrittlement and hydrogen-assisted cracking (ISO 7539-11:2013) | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 10: Reverse U-bend method (ISO 7539-10:2013) | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 1: General guidance on testing procedures (ISO 7539-1:2012) | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 6: Preparation and use of precracked specimens for tests under constant load or constant displacement - Amendment 1 (ISO... | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 8: Preparation and use of specimens to evaluate weldments (ISO 7539-8:2000) | |
| Corrosion of metals and alloys - Stress corrosion testing - Part 9: Preparation and use of pre-cracked specimens for tests under rising load or rising displacement (ISO 7539-9:2003) | |
| Corrosion of metals and alloys- Stress corrosion testing-Part 7:Slow strain rate testing (ISO 7539-7:2005) | |
| CORROSION OF METALS AND ALLOYS. DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS. (ISO 6509:1981). | |
| CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 2: PREPARATION AND USE OF BENT-BEAM SPECIMENS. (ISO 7539-2:1989). | |
| CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 3: PREPARATION AND USE OF U-BEND SPECIMENS. (ISO 7539-3:1989). | |
| CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 4: PREPARATION AND USE OF UNIAXIALLY LOADED TENSION SPECIMENS. (ISO 7539-4:1989) | |
| CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 5: PREPARATION AND USE OF C-RING SPECIMENS. (ISO 7539-5:1989). | |
| CORROSION OF METALS AND ALLOYS. STRESS CORROSION TESTING. PART 6: PREParation and use of pre-cracked specimens. (ISO 7539-6:1989) | |
| CORROSION TEST IN ARTIFICIAL ATMOSPHERE. GENERAL REQUIREMENTS. (ISO 7384:1986). | |
| Cosmetics - Microbiology - Quality control of culture media and diluents used in cosmetics standards (ISO 4973:2023) | |
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 1: Steel of property class 4.8 (ISO 7046-1:2011) | |
| Countersunk flat head screws (common head style) with type H or type Z cross recess - Product grade A - Part 2: Steel screws of property class 8.8, stainless steel... | |
| COUNTERSUNK FLAT HEAD SCREWS. PART 2: PENETRATION DEPTH OF CROSS RECESSES. (ISO 7721-2:1990). | |
| CROSS RECESSES FOR SCREWS. (ISO 4757:1983). | |
| Cross-recessed cheese head screws (ISO 7048:2011) | |
| Cross-recessed countersunk (flat) head tapping screws (ISO 7050:2011) | |
| Cross-recessed pan head tapping screws (ISO 7049:2011) | |
| Cross-recessed raised countersunk (oval) head tapping screws (ISO 7051:2011) | |
| DENTAL ABSORBENT POINTS. (ISO 7551:1996). | |
| DENTAL EXPLORERS. (ISO 7492:1997). | |
| Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging (ISO 7711-1:1997) | |
| Dental rotary instruments - Diamond instruments - Part 1: Dimensions, requirements, marking and packaging - Amendment 1 (ISO 7711-1:1997/Amd 1:2009) | |
| DENTAL UNITS. (ISO 7494:1996). | |
| Dentistry - Ceramic materials (ISO 6872:2008) | |
| Dentistry - Ceramic materials (ISO 6872:2015/Amd 1:2018) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in July of 2018.) | |
| Dentistry - Designation system for tooth developmental stages (ISO 5365:2024) | |
| Dentistry - Elastomeric impression materials - Amendment 1 (ISO 4823:2000/Amd 1:2007) | |
| Dentistry - Elastomeric impression materials. (ISO 4823:2000) | |
| Dentistry - Elastomeric impression materials. (ISO 4823:2000/Cor.1:2004 ) | |
| Dentistry - General requirements of hand instruments - Part 1: Non-hinged hand instruments (ISO 4865-1:2023) | |
| Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO 7787-1:2016) | |
| Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters (ISO 6360-3:2005) (Endorsed by AENOR in August of 2006.) | |
| Dentistry - Polymer-based composite machinable blanks (ISO 5139:2023) | |
| Dentistry - Root-canal obturating points (ISO 6877:2006) (Endorsed by AENOR in October of 2006.) | |
| Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009) | |
| Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001) | |
| Dried milk - Determination of moisture content (Reference method) (ISO 5537:2004) | |
| Dyestuffs - Determination of solubility in organic solvents - Gravimetric and photometric methods (ISO 7579:2009) | |
| Energy management systems - Guidelines for a phased implementation (ISO 50005:2021) | |
| Energy management systems - Requirements with guidance for use (ISO 50001:2011) | |
| Energy management systems - Requirements with guidance for use - Amendment 1: Climate action changes (ISO 50001:2018/Amd 1:2024) | |
| Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements (ISO... | |
| Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide (ISO 5923:2012) | |
| Ergonomic principles in the design of work systems (ISO 6385:2004) | |
| Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003) | |
| Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO 7243:2017) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2017.)... | |
| Ergonomics of the thermal environment - Instruments for measuring physical quantities. (ISO 7726:1998) | |
| Fans - Performance testing using standardized airways - Amendment 1 (ISO 5801:2017/Amd 1:2025) | |
| Fasteners - Ends of parts with external ISO metric thread (ISO 4753:2011) | |
| Fasteners - Slotted set screws with cone point (ISO 7434:2024) | |
| Fasteners - Slotted set screws with cup point (ISO 7436:2024) | |
| Fasteners - Slotted set screws with dog point (ISO 7435:2024) | |
| Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) | |
| Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2017) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration)... | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 2: Pedestrian-controlle d lawnmowers - Amendment 1: OPC, cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 2: Pedestrian-controlle d lawnmowers - Amendment 2: Cutting-means-enclos ure guards (ISO 5395-2:2013/Amd 2:2017) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher... | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017) | |
| Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981) | |
| Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017) | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006) (Endorsed by AENOR in October of 2006.) | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006/Amd 2:2015) | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 1 (ISO 5172:2006/Amd 1:2012) | |
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009) | |
| Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010) | |
| Gas welding equipment - Pressure regulators for manifold systems used in welding, cutting and allied processes up to 30 MPa (300 bar) (ISO 7291:2010/AMD 1:2015) | |
| Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017) | |
| Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (ISO 5175-2:2017, Corrected version 2019-01) | |
| Geometrical Product Specifications (GPS) - Dimensional measuring equipment - Design and metrological characteristics of mechanical dial gauges (ISO 463:2006/Cor 1:2007/Cor 2:2009) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998) | |
| Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics (ISO 5463:2024) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in November of 2024.) | |
| Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures. (ISO 5436-1:2000) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011) (Endorsed by AENOR in September of 2012.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 1:2012) (Endorsed by AENOR in March of 2014.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 2:2012) (Endorsed by AENOR in March of 2014.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 3:2012) (Endorsed by AENOR in March of 2014.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 4:2013) (Endorsed by AENOR in December of 2014.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 5 (ISO 7010:2011/Amd 5:2014) (Endorsed by AENOR in February of 2015.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 6 (ISO 7010:2011/Amd 6:2014) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2017.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2011/Amd 7:2016) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in June of 2017.) | |
| Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 8 (ISO 7010:2019/Amd 8:2024) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in February of 2025.) | |
| Graphical symbols for thermal cutting equipment - Amendment 1 (ISO 7287:2002/Amd 1:2024) | |
| GRAPHICAL SYMBOLS FOR THERMAL CUTTING EQUIPMENT. (ISO 7287.1992). | |
| Guidelines for the promotion and implementation of gender equality and women\x92s empowerment (ISO 53800:2024) | |
| Heat-treatable steels, alloy steels and free-cutting steels - Part 1: Non-alloy steels for quenching and tempering (ISO 683-1:2016) | |
| Heat-treatable steels, alloy steels and free-cutting steels - Part 2: Alloy steels for quenching and tempering (ISO 683-2:2016) | |
| Heat-treatable steels, alloy steels and free-cutting steels - Part 3: Case-hardening steels (ISO 683-3:2022) | |
| Heat-treatable steels, alloy steels and free-cutting steels - Part 4: Free-cutting steels (ISO 683-4:2016) | |
| Heat-treatable steels, alloy steels and free-cutting steels - Part 7: Bright products of non-alloy and alloy steels (ISO 683-7:2023) | |
| HEAT-TREATMENT STEELS, ALLOY STEELS AND FREE-CUTTING STEELS. PART 17: BALL AND ROLLER BEARING STEELS (ISO 683-17:1999) | |
| Hexagon socket head cap screws (ISO 4762:2004) | |
| Hexagon washer head tapping screws (ISO 7053:2011) | |
| Hydrometry - Measurement of discharge by the ultrasonic (acoustic) method (ISO 6416:2004) | |
| Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992/Cor 1:2008) | |
| Hypodermic needles for single use - Colour coding for identification (ISO 6009:2016) | |
| Ice makers for commercial use - Classification, requirements and test conditions (ISO 6369:2023) | |
| Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:2016) | |
| Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018) | |
| Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016) | |
| Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nick el-molybdenum-iron alloy (ISO 5832-7:2016) | |
| Industrial fans - Performance testing in situ (ISO 5802:2001) | |
| Industrial fans - Performance testing in situ (ISO 5802:2001/Amd 1:2015) | |
| Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) | |
| Industrial valves - Mounting kits for part-turn valve actuator attachment (ISO 5640:2024) | |
| Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991) | |
| Industrial valves - Part-turn actuator attachments (ISO 5211:2017) | |
| Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) | |
| Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) | |
| Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) | |
| Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected... | |
| Inland navigation vessels - Manually- and power-operated coupling devices for pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2015) | |
| Innovation management - Fundamentals and vocabulary (ISO 56000:2020) | |
| Innovation management - Tools and methods for intellectual property management - Guidance (ISO 56005:2020) | |
| Innovation management - Tools and methods for managing opportunities and ideas - Guidance (ISO 56007:2023) | |
| Innovation management system - Requirements (ISO 56001:2024) | |
| Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021) | |
| Knitting - Basic concepts - Vocabulary. (ISO 4921:2000) | |
| Laboratory glassware - Boiling flasks with conical ground joints (ISO 4797:2015) | |
| LABORATORY GLASSWARE - BOTTLES - PART 1: SCREW NECK BOTTLES. (ISO 4796-1:2000) | |
| Laboratory glassware - Volumetric instruments - Methods for testing of capacity and for use (ISO 4787:2010, Corrected version 2010-06-15) | |
| Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO 5398-1:2007) | |
| Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017) | |
| Leather - Determination of flex resistance - Part 2: Vamp flex method (ISO 5402-2:2015) | |
| LEATHER. DETERMINATION OF WATER-SOLUBLE MAGNESIUM SALTS. EDTA TITRIMETRIC METHOD. (ISO 5399:1984). | |
| Loading and unloading of liquefied natural gas (LNG) tank wagons and containers (ISO 5124:2024) | |
| Lubricants, industrial oils and related products (class L) - Classification - Part 4: Family H (Hydraulic systems) (ISO 6743-4:2015) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2019) | |
| MECHANICAL AND PERFORMANCE REQUIREMENTS OF CASE HARDENED AND TEMPERED METRIC THREAD ROLLING SCREWS (ISO 7085:1999) | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand- transmitted vibration- Part 1: General requirements. (ISO 5349-1:2001) | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace. (ISO 5349-2:2001) | |
| Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO 7396-1:2016) | |
| Medical gas pipeline systems - Part 2: Anaesthetic gas scavenging disposal systems (ISO 7396-2:2007) | |
| Medical laboratories - Concepts and specifications for the design, development, implementation, and use of laboratory-developed tests (ISO 5649:2024) | |
| Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) | |
| Metallic and other non-organic coatings - Sulfur dioxide test with general condensation of moisture (ISO 6988:1985) | |
| Metallic materials - Bend test (ISO 7438:2005) | |
| Metallic materials - Brinell hardness test - Part 1: Test method (ISO 6506-1:2014) | |
| Metallic materials - Brinell hardness test - Part 2: Verification and calibration of testing machines (ISO 6506-2:2005) (Endorsed by AENOR in September of 2006.) | |
| Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks (ISO 6506-3:2005) (Endorsed by AENOR in September of 2006.) | |
| Metallic materials - Brinell hardness test - Part 4: Table of hardness values (ISO 6506-4:2005) (Endorsed by AENOR in September of 2006.) | |
| Metallic materials - Calibration and verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Calibration and verification of the force-measuring system (ISO 7500-1:2018) | |
| Metallic materials - Rockwell hardness test - Part 1: Test method (ISO 6508-1:2015) | |
| METALLIC MATERIALS - ROCKWELL HARDNESS TEST - PART 2: VERIFICATION AND CALIBRATION OF TESTING MACHINES (SCALES A, B, C, D, E, F, G, H, K, N, T) (ISO 6508-2:1999) | |
| Metallic materials - Rockwell hardness test - Part 3: Calibration of reference blocks (ISO 6508-3:2015) | |
| Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2009) | |
| Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2011) | |
| Metallic materials - Tensile testing - Part 3: Method of test at low temperature (ISO 6892-3:2015) | |
| Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system (ISO 7500-1:2004/Cor 1:2008) | |
| Metallic materials - Verification of static uniaxial testing machines - Part 2: Tension creep testing machines - Verification of the applied force (ISO 7500-2:2006) | |
| Metallic materials - Vickers hardness test - Part 3: Calibration of reference blocks (ISO 6507-3:2005) (Endorsed by AENOR in September of 2006.) | |
| Metallic materials - Vickers hardness test - Part 4: Tables and hardness values (ISO 6507-4:2005) | |
| METALLIC MATERIALS. SHEET AND STRIP 3 MM THICK OR LESS. REVERSE BEND TEST (ISO 7799:1985) | |
| METALLIC MATERIALS. VICKERS HARDNESS TEST. PART 1: TEST METHOD. (ISO 6507-1:1997). | |
| METALLIC MATERIALS. VICKERS HARDNESS TEST. PART 2: VERIFICATION OF TESTING MACHINES (ISO 6507-2:1997) | |
| Microbiology of food and animal feed - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 6: Specific rules for the preparation of samples taken... | |
| Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations (ISO 7218:2007) | |
| Microbiology of food and animal feeding stuffs - General requirements and guidance for microbiological examinations - Amendment 1 (ISO 7218:2007/Amd 1:2013) | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp (ISO 6579:2002) | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium (ISO... | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium -... | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 2: Technique using rabbit plasma fibrinogen agar... | |
| Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products... | |
| Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 5: Specific rules for the preparation of milk... | |
| Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 1: Detection of Salmonella spp. (ISO 6579-1:2017) | |
| Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension... | |
| Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat... | |
| Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 3: Specific rules for the preparation of fish and fishery... | |
| Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of miscellaneous products (ISO... | |
| Milk and milk products - Detection of salmonella spp. (ISO 6785:2001) | |
| Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition (ISO 6976:2016) | |
| Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 1: General guidelines and calculation of composition (ISO 6974-1:2012) | |
| Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 2: Uncertainty calculations (ISO 6974-2:2012) | |
| Natural gas - Determination of composition and associated uncertainty by gas chromatography - Part 5: Isothermal method for nitrogen, carbon dioxide, C1 to C5 hydrocarbons and C6+ hydrocarbons (ISO 6974-5:2014)... | |
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 3: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and hydrocarbons up to C8 using two... | |
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen, carbon dioxide and C1 to C5 and C6+ hydrocarbons for a laboratory... | |
| Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 6: Determination of hydrogen, helium, oxygen, nitrogen, carbon dioxide and C1 to C8 hydrocarbons using three... | |
| Natural gas - Determination of mercury - Part 1: Sampling of mercury by chemisorption on iodine (ISO 6978-1:2003 ) | |
| Natural gas - Determination of mercury - Part 2: Sampling of mercury by amalgamation on gold/platinum alloy (ISO 6978-2:2003) | |
| Natural gas - Determination of potential hydrocarbon liquid content - Gravimetric methods (ISO 6570:2001) | |
| Natural gas - Determination of sulfur compounds - Part 1: General introduction (ISO 6326-1:2007) | |
| Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989) | |
| Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) | |
| Natural gas - Extended analysis - Gas-chromatographic method (ISO 6975:1997) | |
| Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006) | |
| Neurosurgical implants - Sterile, single-use hydrocephalus shunts and components (ISO 7197:2006/Cor 1:2007) | |
| Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (ISO 5580:2023) | |
| Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) | |
| Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017) | |
| Oilseed meals - Determination of oil content - Extraction method with hexane (or light petroleum) (ISO 734:2015) | |
| Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method) (ISO 5511:1992) | |
| Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method) | |
| Oilseeds - Sampling (ISO 542:1990) | |
| Paints and varnishes - Bend test (conical mandrel) (ISO 6860:2006) (Endorsed by AENOR in October of 2006.) | |
| Paints and varnishes - Determination of hiding power - Part 1: Kubelka-Munk method for white and light-coloured paints (ISO 6504-1:1983) (Endorsed by AENOR in October of 2006.) | |
| Paints and varnishes - Determination of hiding power - Part 3: Determination of contrast ratio of light-coloured paints at a fixed spreading rate (ISO 6504-3:2006) | |
| Paints and varnishes - Determination of monomeric diisocyanate content in coating materials and similar products using high performance liquid chromatography with ultraviolet detection (HPLC-UV) (ISO 6923:2023) | |
| Paints and varnishes - Determination of resistance to abrasion - Part 1: Rotating abrasive-paper-cover ed wheel method (ISO 7784-1:1997) | |
| Paints and varnishes - Determination of resistance to abrasion - Part 2: Rotating abrasive rubber wheel method (ISO 7784-2:1997) | |
| Paints and varnishes - Determination of resistance to abrasion - Part 3: Reciprocating test panel method (ISO 7784-3:2000) | |
| Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998) | |
| Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (ISO 6270-2:2005) | |
| Paints and varnishes - Determination of water-vapour transmission properties - Cup method (ISO 7783:2011) | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) | |
| Pan head screws with type H or type Z cross recess - Product grade A (ISO 7045:2011) | |
| Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) | |
| Performance of buildings - Detection of heat, air and moisture irregularities in buildings by infrared methods - Part 3: Qualifications of equipment operators, data analysts and report writers (ISO 6781-3:2015)... | |
| Petroleum products - Determination of knock characteristics of motor fuels - Research method (ISO 5164:2014) | |
| Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:1998) | |
| Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017, Corrected version 2024-09) | |
| Pipework - Metal hoses and hose assemblies - Vocabulary (ISO 7369:2004) | |
| PIPEWORK COMPONENTS. DEFINITION AND SELECTION OF DN (NOMINAL SIZE). (ISO 6708:1995). | |
| Plain washers, chamfered. Normal series. Product grade A. (ISO7090:2000). | |
| Plain washers. Exta large series. Product grade C. (ISO 7094:2000). | |
| Plain washers. Large series. Part 1: Product grade A. (ISO 7093-1:2000). | |
| Plain washers. Large series. Part 2: Product grade C. (ISO 7093-2:2000). | |
| Plain washers. Normal series. Product grade A. (ISO 7089:2000). | |
| Plain washers. Normal series. Product grade C. (ISO 7091:2000). | |
| Plain washers. Small series. Product grade A. (ISO 7092:2000). | |
| Plastics - Acrylonitrile-styren e-acrylate (ASA), acrylonitrile-(ethyl ene-propylene-diene) -styrene (AEPDS) and acrylonitrile-(chlor inated polyethylene)-styren e (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of prope... | |
| PLASTICS - DETERMINATION OF APPARENT DENSITY OF MATERIAL THAT CAN BE POURED FROM A SPECIFIED FUNNEL (ISO 60:1977) | |
| PLASTICS - DETERMINATION OF APPARENT DENSITY OF MOULDING MATERIAL THAT CANNOT BE POURED FROM A SPECIFIED FUNNEL (ISO 61:1976) | |
| Plastics - Determination of compressive properties (ISO 604:2002) | |
| Plastics - Determination of dynamic mechanical properties - Part 1: General principles (ISO 6721-1:2011) | |
| Plastics - Determination of dynamic mechanical properties - Part 2: Torsion-pendulum method (ISO 6721-2:2008) | |
| Plastics - Determination of dynamic mechanical properties - Part 3: Flexural vibration - Resonance-curve method (ISO 6721-3:1994, including Technical Corrigendum 1: 1995) | |
| Plastics - Determination of matter extractable by organic solvents (conventional methods) (ISO 6427:2013) | |
| Plastics - Determination of puncture impact behaviour of rigid plastics - Part 2: Instrumented puncture test. (ISO 6603-2:2000) | |
| Plastics - Determination of refractive index (ISO 489:1999) | |
| Plastics - Determination of temperature of deflection under load - Part 1: General test method (ISO 75-1:2013) | |
| Plastics - Determination of temperature of deflection under load - Part 2: Plastics and ebonite (ISO 75-2:2013) | |
| Plastics - Determination of temperature of deflection under load - Part 3: High-strength thermosetting laminates and long-fibre-reinforce d plastics. (ISO 75-3:2004) | |
| Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) | |
| Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) | |
| Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997) | |
| Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009) | |
| Plastics - Determination of water absorption (ISO 62:2008) | |
| Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015) | |
| Plastics - Liquid epoxy resins - Determination of tendency to crystallize (ISO 4895:2014) | |
| Plastics - Methods of exposure to laboratory light sources - Part 1: General guidance. (ISO 4892-1:1999) | |
| Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps (ISO 4892-2:2013) | |
| Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps - Amendment 1 (ISO 4892-2:2006/Amd 1:2009) | |
| Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps (ISO 4892-3:2013) | |
| Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008) | |
| Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7391-1:2006) | |
| Plastics - Polycarbonate (PC) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7391-2:2006) | |
| Plastics - Small enclosures for conditioning and testing using aqueous solutions to maintain the humidity at a constant value (ISO 483:2005) | |
| PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:1994, INCLUDING TECHNICAL CORRIGENDUM 1:1997) | |
| PLASTICS - STYRENE/ACRYLONITRIL E (SAN) MOULDING AND EXTRUSION MATERIALS - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 4894-1:1997) | |
| PLASTICS - STYRENE/ACRYLONITRIL E (SAN) MOULDING AND EXTRUSION MATERIALS - PART 2: PREPARATION OF TEST SPECIMENS AND DETERMINATION OF PROPERTIES (ISO 4894-2:1995) | |
| Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 7792-1:2012) | |
| Plastics - Thermoplastic polyester (TP) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 7792-2:2012) | |
| PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF MOISTURE CONTENT (ISO 585:1990) | |
| Plastics - Unsaturated polyester resins - Determination of reactivity at 80 \xb0C (conventional method) (ISO 584:1982) | |
| Plastics - Vocabulary (ISO 472:2013) | |
| Plastics film and sheeting - Determination of impact resistance by the free-falling dart method - Part 1: Staircase methods (ISO 7765-1:1988) | |
| Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2006) | |
| Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids - Specification (ISO 6808:2014) | |
| PLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS. SPECIFICATION. (ISO 6224:1995). | |
| Plastics pipes and fittings - Determination of opacity (ISO 7686:2005) | |
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005) | |
| Plastics piping systems - Glass-reinforced plastics (GRP) components - Determination of the amounts of constituents (ISO 7510:2017) | |
| PLASTICS. DETERMINATION OF POURABILITY. (ISO 6186:1998). | |
| PLASTICS. HARDENERS AND ACCELERATORS FOR EPOXIDE RESINS. DETERMINATION OF FREE ACID IN ACID ANHYDRIDE. (ISO 7327:1994). | |
| POLYMERIC MATERIALS, CELLULAR FLEXIBLE. METHOD OF ASSESSMENT OF AIR FLOW VALUE AT CONSTANT PRESSURE-DROP. (ISO 7231:1984). | |
| Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022) | |
| Prevailing torque type all-metal hexagon high nuts - Property classes 5, 8, 10 and 12 (ISO 7042:2012) | |
| Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012) | |
| Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012) | |
| Protective clothing - Protection against chemicals - Determination of resistance of protective clothing materials to permeation by liquids and gases. (ISO 6529:2001) | |
| Protective clothing - Protection against liquid chemicals - Test method for resistance of materials to penetration by liquids (ISO 6530:2005) | |
| Protective clothing -- Protection against heat and fire -- Method of test: Evaluation of materials and material assemblies when exposed to a source of radiant heat. (ISO 6942:2002) | |
| Raised countersunk head screws (common head style) with type H or type Z cross recess - Product grade A (ISO 7047:2011) | |
| Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes. (ISO 5183-2:2000) | |
| Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2008) | |
| Resistance welding - Resistance welding equipment - Mechanical and electrical requirements (ISO 669:2016) | |
| Resistance welding - Spot welding electrode caps (ISO 5821:2009) | |
| RESISTANCE WELDING EQUIPMENT - ELECTRODE ADAPTORS, MALE TAPER 1:10 - PART 1:CONICAL FIXING, TAPER 1:10. (ISO 5183-1:1998) | |
| Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014) | |
| RESISTANCE WELDING EQUIPMENT. PARTICULAR SPECIFICATIONS APPLICABLE TO TRANSFORMERS WITH TWO SEPARATE SECONDARY WINDINGS FOR MULTI-SPOT WELDING AS USED IN THE AUTOMOBILE INDUSTRY. (ISO 7284:1993). | |
| Resistance welding equipment. Secondary connecting cables with terminals connected to water-cooled lugs. Dimensions and characteristics. (ISO 5828:2001). | |
| REUSABLE ALL-GLASS OR METAL-AND-GLASS SYRINGES FOR MEDICAL USE. PART 2: DESIGN, PERFORMANCE REQUIREMENTS AND TEST. (ISO 595-2:1987). | |
| Rice - Specification (ISO 7301:2021) | |
| Rice - Specification - Amendment 1 (ISO 7301:2021/Amd 1:2024) | |
| Rubber and plastics hoses - Assessment of ozone resistance under static conditions (ISO 7326:2006) | |
| Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2006) | |
| Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies (ISO 4671:2007) | |
| Rubber and plastics hoses and hose assemblies - Methods of measurement of the dimensions of hoses and the lengths of hose assemblies - Amendment 1: Clarification of position at which... | |
| Rubber and plastics hoses and hose assemblies - Ratios of proof and burst pressure to maximum working pressure - Amendment 1 - Replacement of "design working pressure" by "maximum working... | |
| Rubber and plastics hoses and hose assemblies with wire reinforcements - Hydraulic impulse test with flexing (ISO 6802:2005) | |
| RUBBER AND PLASTICS HOSES AND HOSE ASSEMBLIES. RATIOS OF PROOF AND BURST PRESSURE TO DESIGN WORKING PRESSURE. (ISO 7751:1991). | |
| RUBBER AND PLASTICS HOSES. DETERMINATION OF ABRASION OF LINING. (ISO 7662:1988). | |
| RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA. SPECIFICATION (INCLUDING CORR 1:1995). | |
| RUBBER HOSES - DETERMINATION OF ABRASION RESISTANCE OF THE OUTER COVER. (ISO 6945:1991, AMENDMENT 1:1998) | |
| Rubber hoses and hose assemblies for rotary drilling and vibration applications - Specification (ISO 6807:2003) | |
| Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) | |
| Rubber hoses and hose assemblies for use in oil burners - Specification (ISO 6806:2014) | |
| Rubber hoses and hose assemblies for water suction and discharge - Specification (ISO 4641:2016) | |
| RUBBER HOSES. DETERMINATION OF ABRASION RESISTANCE OF THE OUTER COVER. (ISO 6945:1991). | |
| Rubber or plastics hoses and hose assemblies - Hydraulic-pressure impulse test without flexing (ISO 6803:2008) | |
| Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2010) | |
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999) | |
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003) | |
| Rubber- or plastics-coated fabrics - Determination of blocking resistance (ISO 5978:2023) | |
| Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007) | |
| Rubber- or plastics-coated fabrics - Determination of tear resistance - Part 1: Constant rate of tear methods (ISO 4674-1:2003) | |
| RUBBER- OR PLASTICS-COATED FABRICS. DETERMINATION OF TEAR RESISTANCE. PART 2: BALLISTIC PENDULUM METHOD. (ISO 4674-2:1998). | |
| Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) | |
| Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016) | |
| SHIPBUILDING AND MARINE STRUCTURES. FILLING CONNECTION FOR DRINKING WAER TANKS. PART 2: COMPONENTS. (ISO 5620-2:1992). | |
| SHIPBUILDING. TRAWL WINCHES (ISO 6115:1988). | |
| Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations (ISO 7547:2002) | |
| Ships and marine technology - Air-conditioning and ventilation of accommodation spaces - Design conditions and basis of calculations (ISO 7547:2002/Cor 1:2008) | |
| Ships and marine technology - Inland navigation vessels - Mounting attachments for demountable signal masts for push-tows (ISO 7236:2014) | |
| Ships and marine technology- Magnetic compasses, binnacles and azimuth reading devices- Class B. (ISO 613:2000) | |
| Ships and marine technology- Positioning of magnetic compasses in ships. (ISO 694:2000) | |
| Single-use containers for human venous blood specimen collection (ISO 6710:2017) | |
| Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2017) | |
| SISAL AGRICULTURAL TWINES (ISO 5080:1994) | |
| Slotted set screws with flat point (ISO 4766:2011) | |
| Solid biofuels - Determination of fines content in pellets (ISO 5370:2023) | |
| Spices, condiments and herbs - Determination of volatile oil content (hydrodistillation method) - Amendment 1 (ISO 6571:2008/Amd 1:2017) | |
| Stainless steels for springs - Part 1: Wire (ISO 6931-1:2016) | |
| Steel - Determination of nitrogen content - Spectrophotometric method (ISO 4945:1977) | |
| Steel - Hardenability test by end quenching (Jominy test) (ISO 642:1999) | |
| Steel and cast iron - Determination of copper - 2,2'-Biquinoline spectrophotometric method (ISO 4946:2016) | |
| Steel and cast iron - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 1: Silicon contents between 0,05 % and 1,0 % (ISO 4829-1:2018) | |
| Steel and iron - Determination of chromium content - Potentiometric or visual titration method (ISO 4937:2024) | |
| Steel and iron - Determination of nickel content - Gravimetric or titrimetric method (ISO 4938:2016) | |
| Steel and iron - Determination of sulfur content - Gravimetric method (ISO 4934:2003) (Endorsed by AENOR in September of 2006.) | |
| Steel. Hardenability test by end quenching (Jominy test) (ISO 642:1999) | |
| Steels - Determination of total silicon contents - Reduced molybdosilicate spectrophotometric method - Part 2: Silicon contents between 0,01 % and 0,05 % (ISO 4829-2:2016) | |
| Steels - Micrographic determination of the apparent grain size (ISO 643:2003) | |
| Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) | |
| Technical drawings - Construction drawings - General principles of presentation for general arrangement and assembly drawings (ISO 7519:1991) | |
| Technical drawings - Representation of splines and serrations (ISO 6413:1988) | |
| Technical drawings - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO 6412-1:1989) | |
| Technical drawings - Simplified representation of pipelines - Part 2: Isometric projection (ISO 6412-2:1989) | |
| Technical drawings - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO 6412-3:1993) | |
| TECHNICAL DRAWINGS. PROJECTION METHODS. PART 1: SYNOPSIS (ISO 5456-1:1996) | |
| Technical product documentation (TPD) - Identification of specifications in the technical product documentation (TPD) (ISO 7533:2024) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Technical product documentation (TPD) - Unique integral feature identification (UIFI) (ISO 7499:2024) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in January of 2025.) | |
| Technical product documentation - Data fields in title blocks and document headers (ISO 7200:2004) | |
| TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS II. (ISO 5199:2002) | |
| Test sieves for cereals (ISO 5223:1995, including Amendment 1:1999) | |
| Textile fabrics - Burning behaviour - Determination of ease of ignition of vertically oriented specimens (ISO 6940:2004) | |
| Textile fabrics - Burning behaviour - Measurement of flame spread properties of vertically oriented specimens (ISO 6941:2003) | |
| Textile fabrics - Determination of resistance to surface wetting (spray test) (ISO 4920:2012) | |
| Textiles - Determination of dimensional change in washing and drying. (ISO 5077:2007) | |
| Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) | |
| Textiles - Environmental aspects - Vocabulary (ISO 5157:2023) (Endorsed by Asociaci\xf3n Espa\xf1ola de Normalizaci\xf3n in October of 2023.) | |
| Textiles - Fibres - Determination of breaking force and elongation at break of individual fibres (ISO 5079:1995) | |
| Textiles - Methods for analysis of woven fabrics construction - Part 2: Determination of number of threads per unit length (ISO 7211-2:2024) | |
| Textiles - Natural fibres - Generic names and definitions (ISO 6938:2012) | |
| Textiles - Preparation of laboratory test samples and test specimens for chemical testing (ISO 5089:1977) | |
| Thermal insulation - Physical quantities and definitions (ISO 7345:1987) | |
| Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) | |
| Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015) | |
| Titanium dioxide pigments for paints - Part 1: Specifications and methods of test. (ISO 591-1:2000) | |
| Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts - Products grades A and C (ISO 4759-3:2000) | |
| Tolerances for fasteners. Part 1: Bolts, screws, studs and nuts. Product grades A, B and C. (ISO 4759-1:2000). | |
| Tool steels (ISO 4957:1999) | |
| Vitreous and porcelain enamels - Determination of surface scratch hardness according to the Mohs scale (ISO 6769:2022) | |
| Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012) | |
| Water quality - Determination of phosphorus - Ammonium molybdate spectrometric method (ISO 6878:2004) | |
| Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:2012) | |
| Water quality - Determination of turbidity (ISO 7027:1999) | |
| Water quality - Determination of turbidity - Part 1: Quantitative methods (ISO 7027-1:2016) | |
| WATER QUALITY - ENUMERATION OF CULTURABLE MICRO-ORGANISMS. COLONY COUNT BY INOCULATION IN A NUTRIENT AGAR CULTURE MEDIUM (ISO 6222:1999) | |
| Water quality - Requirements for the performance testing of membrane filters used for direct enumeration of microorganisms by culture methods (ISO 7704:2023) | |
| Water quality - Sampling - Part 13: Guidance on sampling of sludges (ISO 5667-13:2011) | |
| Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014) | |
| Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) | |
| Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017) | |
| Water quality - Sampling - Part 19: Guidance on sampling in marine sediments (ISO 5667-19:2004) | |
| Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2006) | |
| Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters (ISO 5667-23:2011) | |
| Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018) | |
| Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014) | |
| WATER QUALITY. DETERMINATION OF THE ACUTE LETHAL TOXICITY OF SUBSTANCES TO A FRESHWATER FISH [BRACHYDANIO RERIO HAMILTON-BUCHANAN (TELEOSTEI, CYPRINIDAE)). PART 3: FLOW-THROUGH METHOD. (ISO 7346-3:1996). | |
| WATER QUALITY. DETERMINATION OF THE ACUTE LETHAL TOXICITY OF SUBSTANCES TO A FRESHWATER FISH [BRACHYDANIO RERIO HAMILTON-BUCHANAN (TELEOSTEI, CYPRINIDAE)]. PART 1: STATIC METHOD. (ISO 7346-1:1996). | |
| WATER QUALITY. DETERMINATION OF THE ACUTE LETHAL TOXICITY OF SUBSTANCES TO A FRESHWATER FISH [BRACHYDANIO RERIO HAMILTON-BUCHANAN (TELEOSTEI, CYPRINIDAE)]. PART 2: SEMI-STATIC METHOD. (ISO 7346-2:1996). | |
| Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) | |
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 1: Fusion welding (ISO 6520-1:2007) | |
| Welding and allied processes - Classification of geometric imperfections in metallic materials - Part 2: Welding with pressure (ISO 6520-2:2013) | |
| Welding and allied processes - Welding positions (ISO 6947:2011) | |
| Welding consumables - Deposition of a weld metal pad for chemical analysis (ISO 6847:2013) | |
| Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2004) | |
| Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings (ISO 544:2003) | |
| Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013) | |
| Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012) |
| << Prev | Next >> |