Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
600
650
700
750
800
850
860
870
880
890
900
910
911
912
913
914
915
916
917
918
919
920
921
922
923
930
940
950
960
970
980
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| A.C.-supplied electronic ballasts for fluorescent lamps - Part 2: Performance requirements | |
| A.C.-supplied electronic ballasts for fluorescent lamps - Performance requirements | |
| AC Electromagnetic Switches | |
| AC supplied electronic ballasts for fluorescent lamps (Amendment 1) | |
| AC Supplied Electronic Ballasts for Fluorescent Lamps | |
| Accelerated life test methods for phosphoric acid fuel cell | |
| Aircraft Lamps | |
| Alkaline Primary Cells and Batteries | |
| Amorphous solar PV modules (Amendment 1) | |
| Appliance Couplers for Domestic and Similar Use | |
| Appliance couplers for household and similar general purposes - Part 1: General requirements | |
| Appliance couplers for household and similar general purposes - Part 2-101: Couplers for electric heating appliances | |
| Appliance couplers for household and similar general purposes - Part 2-1: Sewing machine couplers | |
| Appliance couplers for household and similar general purposes - Part 2-2: Interconnection couplers for household and similar equipment | |
| Appliance couplers for household and similar general purposes - Part 2-3: Appliance couplers with a degree of protection higher than IPXO | |
| Appliance couplers for household and similar general purposes - Part 2-4: Couplers dependent on appliance weight for engagement | |
| Appliance couplers for household and similar general purposes - Part 3: Standard sheets and gauges | |
| Appliance couplers for household and similar general purposes -- Part 1: General requirements (Amendment 1) | |
| Appliance couplers for household and similar general purposes -- Part 3: Standard sheets and gauges (Amendment 1) | |
| Ball Lamps | |
| Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Part 2: Performance requirements | |
| Ballasts for discharge lamps (excluding tubular fluorescent lamps) - Performance requirements | |
| Ballasts for Fluorescent Lamps | |
| Ballasts for High Pressure Mercury Vapour Lamps and Ballasts for Low Pressure Sodium Vapour Lamps | |
| Ballasts for tubular fluorescent lamps - Part 2: Performance requirements | |
| Ballasts for tubular fluorescent lamps - Performance requirements | |
| Bayonet lampholders | |
| Box-type switchgear assemblies for low-voltage distribution purpose (Amendment 1) | |
| Box-Type Switchgear Assemblies for Low-Voltage Distribution Purpose | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 1: General requirements | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 21: Particular requirements for boxes and enclosures with provision for suspension means | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 22: Particular requirements for connecting boxes and enclosures | |
| Boxes and enclosures for electrical accessories for household and similar fixed electrical installations - Part 31: Particular requirements for electrical safety | |
| Boxes for Rigid Metal Conduits | |
| Busways | |
| Cable trunking and ducting systems for electrical installations - Part 1: General requirements | |
| Cable trunking and ducting systems for electrical installations - Part 2: Particular requirements - Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings | |
| Cable trunking and ducting systems for electrical installations - Part 3-1: Metal raceway, Fitting for metal raceway and Box for metal raceway | |
| Caps for Unplasticized Polyvinyl Chloride (UPVC) Conduit | |
| Ceiling Rosettes | |
| Circuit-breakers for overcurrent protection for household and similar installations (Amendment 1) | |
| Circuit-breakers for overcurrent protection for household and similar installations | |
| Conduit systems - Part 1: General requirements | |
| Conduit systems for cable management - Part 21: Particular requirements - Rigid conduit systems | |
| Conduit systems for cable management - Part 22: Particular requirements - Pliable conduit systems | |
| Conduit systems for cable management - Part 23: Particular requirements - Flexible conduit systems | |
| Conduits for electrical purposes - Outside diameters of conduits for electrical installations and threads for conduits and fittings | |
| Connectors for Unplasticized Polyvinyl Chloride (UPVC) Conduit | |
| Couplings for Unplasticized Polyvinyl Chloride (UPVC) Conduit | |
| Crystalline silicon terrestrial photovoltaic (PV) modules - Design qualification and type approval | |
| Crystalline Solar Cell Module | |
| Crystalline solar PV modules (Amendment 1) | |
| Current Limiters | |
| Cut-Out Switches | |
| DC or AC supplied electronic control gear for LED modules - Performance requirements | |
| Design guide on electrical circuits for photovoltaic arrays | |
| Design Guide on Structures for Photovoltaic Array | |
| Designation method for glass bulbs of lamps | |
| Designation method for mounted filaments of incandescent tungsten lamps | |
| Discharge lamps (excluding fluorescent lamps) - Safety specifications | |
| Double-capped fluorescent lamps - Part 1: Safety specifications | |
| Double-capped fluorescent lamps - Part 2: Performance specifications | |
| Edison screw lamp holders | |
| Edison screw lampholders (Amendment 1) | |
| Edison Screw Lampholders | |
| Electric Hotplates | |
| Electric Irons | |
| Electric KOTATSU | |
| Electric KOTATU (Amendment 1) | |
| Electric Ovens | |
| Electric Radiant Heaters (Amendment 1) | |
| Electric Radiant Heaters | |
| Electric Toasters | |
| Electric Vacuum Cleaners | |
| Electrical accessories - Cable reels for household and similar purposes | |
| Electrical accessories - Cord sets and interconnection cord sets | |
| Environmental and endurance test methods for amorphous solar cell modules (Amendment 1) | |
| Environmental and Endurance Test Methods for Amorphous Solar Cell Modules | |
| Environmental and Endurance Test Methods for Crystalline Solar Cell Modules | |
| Environmental and endurance test methods for crystalline solar PV modules (Amendment 1) | |
| Estimation method of generating electric energy by PV power system | |
| Filament lamps for road vehicles - Part 1: Dimensional, electrical and luminous requirements | |
| Filament lamps for road vehicles - Part 2: Performance requirements | |
| Filament lamps for road vehicles - Part 3: Minature lamps | |
| Fire test for Photovoltaic (PV) modules | |
| Fittings for Flexible Metal Conduits | |
| Fittings for Pliable Plastics Conduits | |
| Fittings for Rigid Metal Conduits; (Errata-1996) | |
| Fittings for Underfloor Ducts | |
| Flexible Metal Conduits | |
| Fluorescent Lamp Luminaires for Commercial, Industrial and Public Lighting | |
| Fluorescent Lamp Luminaires for Residential Lighting | |
| Fluorescent Lamps for General Lighting Service | |
| Flush Plates | |
| General Requirements for Fuses for the Protection of Low- Voltage Cables and Lines | |
| General Rules for Fittings of Metal Conduits and Underfloor Ducts | |
| General Rules for Fittings of Unplasticized Polyvinyl Chloride (UPVC) Conduit | |
| General rules for phosphoric acid fuel cell power generating system | |
| General Rules for Photovoltaic Array | |
| General rules for small polymer electrolyte fuel cell power systems | |
| General Rules for Stand-Alone Photovoltaic Power Generating System | |
| General Rules of Endurance Test Methods of Household and Similar Electrical Appliances | |
| General Rules of Testing Method for Lamps | |
| General safety code for small polymer electrolyte fuel cell power systems | |
| General safety requirements for wiring devices (Amendment 1) | |
| General safety requirements for wiring devices | |
| Glass Tubing for Fluorescent Lamps | |
| Glossary of terms for fuel cell power system | |
| Glossary of Terms for Photovoltaic Power Generation | |
| Glow-starters for fluorescent lamps - General and safety requirements | |
| Glow-Starters for fluorescent lamps - Performence Specification | |
| Glow-starters for fluorescent lamps | |
| Guideline for Usability - Design of Electric Home Appliances | |
| Hand Lanterns for Explosive Atmospheres | |
| Hand lanterns | |
| High Pressure Mercury Vapour Lamps Edition 1; (Erratum - 1996) | |
| High-pressure sodium vapour lamps - Performance specification | |
| Incandescent lamps - Safety specifications - Part 3: Tungsten halogen lamps (non-vehicle) | |
| Incandescent Lamps for Bicycle Dynamo Lamps | |
| Indication of phosphoric fuel cell power facility | |
| Indication of Photovoltaic Array Performance | |
| Indication of polymer electrolyte fuel cell power facility | |
| Indicator lamps | |
| Indicator Lights for Industry Use Edition 1; (Erratum - 1996) | |
| Indoor measuring method of output power for multi-junction solar cells and modules (Component reference cell method) | |
| Infrared Lamps | |
| Interrelationship of photovoltaic modules and arrays | |
| Junction Box for Indoor Wiring (for 600 V Grade Polyvinyl Chloride Insulated and Sheathed Cables: VVF) | |
| Knife Switches with Cover | |
| Lamp caps and holders together with gauges for the control of inter changeability and safety Part 2: Lamp holders (Amendment 3) | |
| Lamp caps and holders together with gauges for the control of interchange ability and safety - Part 3: Gauges | |
| Lamp caps and holders together with gauges for the control of interchange ability and safety Part 0: General information (Amendment 3) | |
| Lamp caps and holders together with gauges for the control of interchange ability and safety Part 1: Lamp caps (Amendment 3) | |
| Lamp caps and holders together with gauges for the control of interchange ability and safety Part 3: Gauges (Amendment 1) | |
| Lamp caps and holders together with gauges for the control of interchange ability and safety Part 3: Gauges (Amendment 3) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 0: General information | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps (Amendment 2) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lamp holders | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 0: General information (Amendment 1) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 0: General information (Amendment 2) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 0: General information (Amendment 4) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 0: General information (Amendment 5) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 0: General information (Amendment 6) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 1) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 10) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 11) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 12) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 13) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 14) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 4) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 5) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 6) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 7) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 8) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps (Amendment 9) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lamp holders (Amendment 1) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lamp holders (Amendment 2) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 10) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 11) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 12) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 13) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 14) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 4) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 5) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 6) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 7) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 8) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders (Amendment 9) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 10) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 11) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 12) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 13) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 14) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 2) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 4) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 5) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 6) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 7) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 8) | |
| Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges (Amendment 9) | |
| Lamp Caps and Holders | |
| Lamp control gear - Part 1: General and safety requirements | |
| Lamp control gear - Part 2-8: Particular requirements for ballasts for fluorescent lamps | |
| Lamp control gear - Part 2-9: Particular requirements for ballasts for discharge lamps (excluding fluorescent lamps) | |
| Lamp controlgear - Part 2-10: Particular requirements for electronic invertors and convertors for high-frequency operation of cold start tubular discharge lamps (neon tubes) | |
| Lamp controlgear - Part 2-11: Particular requirements for miscellaneous electronic circuits used with luminaires | |
| Lamp controlgear - Part 2-12: Particular requirements for d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) | |
| Lamp controlgear - Part 2-1: Particular requirements for starting devices (other than glow starters) | |
| Lamp controlgear - Part 2-2: Particular requirements for d.c. or a.c. supplied electronic step-down convertors for filament lamps | |
| Lamp controlgear - Part 2-3: Particular requirements for a.c. supplied electronic ballasts for fluorescent lamps | |
| Lamp controlgear - Part 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting | |
| Lamp controlgear \x96 Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules | |
| Lamp controlgear-Part 2-13: Particular requirements for d.c. or a.c. supplied electronic controlgear for LED modules (Amendment 1) | |
| Lampholders and Starterholders for Fluorescent Lamps | |
| Lamps for railway | |
| Lamps for road vehicles; Errata - 07/1995 | |
| Lead-Acid Batteries for General Service (Revised Nov 1975) | |
| LED modules for general lighting - Safety specifications | |
| LED modules for general lighting service-Performance requirements | |
| Lighting busways (Amendment 1) | |
| Lighting Busways - Particular Safety Requirements for Luminaires use | |
| Lighting Busways - Particular Safety Requirements for Luminaries use | |
| Lighting busways - Particular safety requirements for power supply use | |
| Lighting Busways | |
| Low Pressure Mercury Germicidal Discharge Lamps | |
| Low pressure sodium vapour lamps | |
| Low Voltage Panelboards for Household Use | |
| Low-Voltage Circuit Breakers | |
| Low-Voltage Enclosed Switches (AC 600 V and Below) | |
| Low-voltage fuses - Part 11: Class A, class B fuses | |
| Low-voltage fuses - Part 1: General requirements | |
| Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Section I to V: Examples of types of standardized fuses... | |
| Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) | |
| Low-voltage switchgear and control gear - Part 4: Contactors and motor-starters - Section 1: Electromechanical contactors and motor-starters | |
| Low-voltage switchgear and control gear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices | |
| Low-voltage switchgear and control gear - Part 5: Control circuit devices and switching elements - Section 2: Proximity switches | |
| Low-voltage switchgear and controlgear - Controller device interfaces (CDIs) - Part 2: Actuator sensor interface (AS-i) | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 1: General rules | |
| Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 7: CompoNet | |
| Low-Voltage Switchgear and Controlgear - Part 1: General Rules | |
| Low-voltage switchgear and controlgear - Part 2-1: Circuit-breakers | |
| Low-voltage switchgear and controlgear - Part 2-2: Circuit-breakers incorporating residual current protection | |
| Low-voltage switchgear and controlgear - Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units | |
| Low-voltage switchgear and controlgear - Part 4-2: Contactors and motor-starters - AC semiconductor motor controllers and starters | |
| Low-voltage switchgear and controlgear - Part 4-3: Contactors and motor-starters - AC semiconductor controllers and contactors for non-motor loads | |
| Low-voltage switchgear and controlgear - Part 5-101: Contactor relays and auxiliary contact for contactors and motor-starters | |
| Low-voltage switchgear and controlgear - Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices (Amendment 1) | |
| Low-voltage switchgear and controlgear - Part 5-5: Control circuit devices and switching elements - Electrical emergency stop device with mechanical latching function | |
| Low-voltage switchgear and controlgear - Part 5-8: Control circuit devices and switching elements - Three-position enabling switches | |
| Low-voltage switchgear and controlgear - Part 7-1: Ancillary equipment - Terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors | |
| Low-voltage switchgear and controlgear - Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks | |
| Low-voltage switchgear and controlgear -- Part 7-4: Ancillary equipment -- PCB terminal blocks for copper conductors | |
| Luminaires - Part 1: General requirements for safety (Amendment 1) | |
| LUMINAIRES - PART 1: GENERAL REQUIREMENTS FOR SAFETY | |
| Luminaires - Part 2 : Particular requirements for safety - Section 19 : Air-handling luminaires | |
| Luminaires - Part 2-11: Particular requirements - Aquarium luminaires | |
| Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights | |
| Luminaires - Part 2-13: Particular requirements - Ground recessed luminaires | |
| Luminaires - Part 2-13: Particular requirements for safety - Ground recessed luminaires (Amendment 1) | |
| Luminaires - Part 2-14: Particular requirements - Luminaires for cold cathode tubular discharge lamps (neon tubes) and similar equipment | |
| Luminaires - Part 2-17: Particular requirements for safety - Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor) (Amendment 1) | |
| Luminaires - Part 2-17: Particular requirements for safety - Luminaires for stage lighting, television, film and photographic studios (outdoor and indoor) | |
| Luminaires - Part 2-21: Particular requirements for safety - Rope lights | |
| Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filament lamps (Amendment 1) | |
| Luminaires - Part 2-23: Particular requirements - Extra low voltage lighting systems for filament lamps | |
| Luminaires - Part 2-24: Particular requirements - Luminaires with limited surface temperatures | |
| Luminaires - Part 2-6: Particular requirements for safety - Luminaires with built-in transformers or converters for filament lamps | |
| Luminaires - Part 2-7: Particular requirements for safety - Portable luminaires for garden use (Amendment 1) | |
| Luminaires - Part 2-7: Particular requirements for safety - Portable luminaires for garden use | |
| Luminaires - Part 2-9: Particular requirements - Photo and film luminaires (non-professional)(A mendment 1) | |
| Luminaires - Part 2-9: Particular requirements - Photo and film luminaires (non-professional) | |
| Luminaires - Part 2: Particular requirements for safety - Section 1: Fixed general purpose luminaires (Amendment 1) | |
| Luminaires - Part 2: Particular requirements for safety - Section 1: Fixed general purpose luminaires | |
| Luminaires - Part 2: Particular requirements for safety - Section 2: Recessed luminaires | |
| Luminaires - Part 2: Particular requirements for safety - Section 3: Luminaires for road and street lighting | |
| Luminaires - Part 2: Particular requirements for safety - Section 4: Portable general purpose luminaires (Amendment 1) | |
| Luminaires - Part 2: Particular requirements for safety - Section 4: Portable general purpose luminaires | |
| Luminaires - Part 2: Particular requirements for safety - Section 5: Floodlights (Amendment 1) | |
| Luminaires - Part 2: Particular requirements for safety - Section 5: Floodlights | |
| Luminaires - Part 2: Particular requirements for safety Section 22: Luminaires for emergency lighting | |
| Luminaires - Part 2\xb720: Particular requirements for safety - Lighting chains | |
| Luminaires - Part 2\xb78: Particular requirements for safety - Handlamps | |
| Luminaires - Part 3: General requirements for performance | |
| Luminaires - Part 5: Gonio-photometric methods (Amendment 1) | |
| Luminaires - Part 5: Gonio-photometric methods | |
| Luminaires for explosive atmospheres | |
| Luminaires for Road Lighting | |
| Luminaires-Part 2: Particular requirements for safety-Section 2: Recessed luminaires (Amendment 1) | |
| Luminaires | |
| Luminous-tube transformers | |
| Manganese Dioxide Lithium Primary Cells and Batteries | |
| Manganese Dry Cells and Batteries | |
| Measurement methods for 11 mode energy efficiency of small fuel cell power systems and for annual energy consumption of standard residence | |
| Measurement methods of energy consumption and calculation methods of facility specifications used to estimate energy consumption for fuel cell power systems | |
| Measuring method of equivalent cell temperature for crystalline solar cells by the open-circuit voltage | |
| Measuring method of output power for amorphous solar cells (Amendment 1) | |
| Measuring Method of Output Power for Amorphous Solar Cells | |
| Measuring method of output power for amorphous solar modules (Amendment 1) | |
| Measuring Method of Output Power for Amorphous Solar Modules | |
| Measuring Method of Output Power for Crystalline Solar Cell Modules | |
| Measuring Method of Output Power for Crystalline Solar Cells | |
| Measuring method of output power for crystalline solar PV modules | |
| Measuring methods of lamps for general lighting (Amendment 1) | |
| Measuring methods of lamps for general lighting (Amendment 2) | |
| Measuring methods of spectral response for amorphous solar cells and modules (Amendment 1) | |
| Measuring Methods of Spectral Response for Amorphous Solar Cells and Modules | |
| Measuring methods of spectral response for crystalline solar cells and modules | |
| Measuring Methods of Spectral Response for Crystalline Solar Cells | |
| Measuring methods of spectral response for multi-junction solar cells | |
| Measuring methods of white light emitting diode for general lighting | |
| Measuring Procedure of Photovoltaic System Performance | |
| Measuring Procedure of Power Conditioner Efficiency for Photovoltaic Systems | |
| Measuring Procedure of Residual Capacity for Lead Acid Battery in Photovoltaic System | |
| Metal halide lamps - Performance specification | |
| Method for the Designation of Miniature Lamps | |
| Method of calculation on fluorescent luminaire efficacy and fluorescent luminaire efficacy rating (Amendment 1) | |
| Method of calculation on Fluorescent luminaire efficacy index | |
| Method of Determining the Luminous Flux Versus Time Characteristics and the Light Output of Photoflash Lamps | |
| Method of measuring the pinch temperature of quartz glass lamps | |
| Method of utilization factor table calculation for indoor luminaires | |
| Methods of Illumination Measurements | |
| Methods of Luminance Measurements | |
| Miscellaneous lamp holders - Part 2-1: Particular requirements \x96 Lamp holders S14 | |
| Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for printed circuit board based LED-modules (Amendment 1) | |
| Miscellaneous lampholders - Part 2-2: Particular requirements - Connectors for printed circuit board based LED-modules | |
| Miscellaneous lampholders - Part 2-3: Particular requirements - Lampholders for double-capped linear LED lamps | |
| Miscellaneous lampholders-Part 1: General requirements and tests | |
| Molded Case Circuit Breakers (MCCB) | |
| Mounting Frame for Interchangeable Wiring Devices of Large Square Boss Type | |
| Negative-Glow Lamps | |
| Neon Tubings | |
| Non-integrated linear LED lamps with GX16t-5 cap for general lighting services - Part 1: safety specifications | |
| Non-integrated linear LED lamps with GX16t-5 cap for general lighting services - Part 2: Performance requirements | |
| Non-integrated linear LED lamps with GX16t-5 cap for general lighting services | |
| Normal Bends for Unplasticized Polyvinyl Chloride (UPVC) Conduit | |
| On-Site Measurements of Photovoltaic Array I - V Characteristics | |
| Outdoor measuring method of output power for amorphous solar cells and modules (Amendment 1) | |
| Outdoor Measuring Method of Output Power for Amorphous Solar Cells and Modules | |
| Outdoor measuring method of output power for crystalline solar cells and modules (Amendment 1) | |
| Outdoor measuring method of output power for crystalline solar cells and modules | |
| Outdoor measuring method of output power for multi-junction solar cells and modules | |
| Particular Requirements for Link-Fuses | |
| Particular requirements for low-voltage cartridge fuses (Amendment 1) | |
| Particular Requirements for Low-Voltage Cartridge Fuses | |
| Particular requirements for screw fuses and D-type fuses (Amendment 1) | |
| Particular Requirements for Screw Fuses and D-Type Fuses | |
| Performance test for stationary polymer electrolyte fuel cell stack | |
| Photobiological safety of lamps and lamp systems (Amendment 1) | |
| Photobiological safety of lamps and lamp systems | |
| Photoelectric Controls for Public Lighting | |
| Photometric measurements on incandescent lamps used for photometric standards (Amendment 1) | |
| Photometric measurements on incandescent lamps used for photometric standards | |
| Photometry of white light emitting diode for general lighting - Part 1: LED packages (Amendment 1) | |
| Photometry of white light emitting diode for general lighting - Part 1: LED packages | |
| Photometry of white light emitting diode for general lighting - Part 2: LED modules and LED light engines | |
| Photometry of white light emitting diode for general lighting - Part 3: Measurement methods for lumen maintenance | |
| Photometry of white light emitting diode for general lighting-Part 2: LED modules and LED light engines (Amendment 1) | |
| Photovoltaic (PV) module safety qualification - Part 1: Requirements for construction | |
| Photovoltaic (PV) module safety qualification - Part 2: Requirements for testing | |
| Photovoltaic devices - Part 10: Methods of linearity measurement | |
| Photovoltaic devices - Part 1: Measurement of photovoltaic current-voltage characteristics | |
| Photovoltaic devices - Part 2: Requirements for reference solar devices | |
| Photovoltaic devices - Part 3: Measurement principles for photovoltaic (PV) solar devices with reference spectral irradiance data | |
| Photovoltaic devices - Part 4: Reference solar devices - Procedures for establishing calibration traceability | |
| Photovoltaic devices - Part 7: Computation of the spectral mismatch correction for measurements of photovoltaic devices | |
| Photovoltaic devices - Part 8: Measurement of spectral responsivity of a photovoltaic (PV) device | |
| Photovoltaic devices - Part 9: Solar simulator performance requirements | |
| Plastic coated steel pipes for cable-ways (Amendment 1) | |
| Plastic Coated Steel Pipes for Cable-Ways | |
| Plastic surface raceways for interior wiring | |
| Pliable Plastics Conduits | |
| Plugs and Receptacles for Domestic and Similar General Use | |
| Plugs and socket-outlets for household and similar purposes - Part 1: General requirements (Amendment 1) | |
| Plugs and socket-outlets for household and similar purposes - Part 1: General requirements | |
| Plugs and socket-outlets for household and similar purposes - Part 2-11: Particular requirements for twist lock and another | |
| Plugs and socket-outlets for household and similar purposes - Part 2-1: Particular requirements for fused plugs | |
| Plugs and socket-outlets for household and similar purposes - Part 2-2: Particular requirements for socket-outlets for appliances | |
| Plugs and socket-outlets for household and similar purposes - Part 2-3: Particular requirements for switched socket-outlets without interlock for fixed installations | |
| Plugs and socket-outlets for household and similar purposes - Part 2-5: Particular requirements for adaptors | |
| Plugs and socket-outlets for household and similar purposes - Part 2-6: Particular requirements for switched socket-outlets with interlock for fixed electrical installations | |
| Plugs, socket-outlets and couplers for industrial purposes | |
| Power Conditioner for Small Photovoltaic Power Generating System | |
| Practical Method for the Determination of Mercury Filled in Fluorescent Lamps | |
| Primary batteries - Physical and electrical specifications | |
| Primary Batteries: General | |
| Primary reference solar cells | |
| Projectors for Incandescent Lamps (Flood Light Type) | |
| Reflector Lamps | |
| Remote Control Relays and Remote Control Switches | |
| Remote Control Transformers | |
| Requirements for fuse-links for the protection of semiconductor devices | |
| Residual Current Operated Circuit Breakers | |
| Residual current operated circuit-breakers with integral over current protection for household and similar uses (RCBOs) | |
| Residual current operated circuit-breakers without integral over current protection for household and similar uses (RCCBs) | |
| Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCBs) (Amendment 1) | |
| Residual Current Sensing and Relaying Equipment | |
| Rigid Steel Conduits | |
| Saddles for Unplasticized Polyvinyl Chloride (UPVC) Conduit | |
| Safety evaluation test for stationary polymer electrolyte fuel cell stack | |
| Safety of Primary Batteries with Aqueous Electrolyte | |
| Safety of snow melting photovoltaic (PV) modules -- Requirements for construction and testing | |
| Safety of transportable motor-operated electric tools - Part 1: General requirements | |
| Safety of transportable motor-operated electric tools - Part 2-10: Particular requirements for cutting-off grinders | |
| Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for mitre-bench saws | |
| Safety of transportable motor-operated electric tools - Part 2-1: Particular requirements for circular saws | |
| Safety of transportable motor-operated electric tools - Part 2-2: Particular requirements for radial arm saws | |
| Safety of transportable motor-operated electric tools - Part 2-3: Particular requirements for planers and thicknessers | |
| Safety of transportable motor-operated electric tools - Part 2-4: Particular requirements for bench grinders | |
| Safety of transportable motor-operated electric tools - Part 2-5: Particular requirements for band saws | |
| Safety of transportable motor-operated electric tools - Part 2-6: Particular requirements for diamond drills with water supply | |
| Safety of transportable motor-operated electric tools - Part 2-7: Particular requirements for diamond saws with water supply | |
| Safety of transportable motor-operated electric tools - Part 2-8: Particular requirements for single spindle vertical moulders | |
| Safety of transportable motor-operated electric tools - Part 2-9: Particular requirements for mitre saws | |
| Safety requirements for portable sealed secondary cells, and batteries made from them, for use in portable applications | |
| Safety specifications for incandescent lamps - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes | |
| Safety specifications for incandescent lamps - Part 2: Tungsten halogen lamps for domestic and similar general lighting purposes | |
| Safety Standard for Primary Lithium Batteries | |
| Safety tests for portable Lithium Ion secondary cells and batteries for use in portable electronic applications | |
| Salt mist corrosion testing of photovoltaic (PV) modules | |
| Sealed Nickel-Cadmium Cylindrical Rechargeable Single Cells | |
| Sealed nickel-cadmium rechargeable single cells | |
| Sealed Nickel-Metal Hydride Rechargeable Single Cells | |
| Secondary cells and batteries containing alkaline or other non-acid electrolytes - Mechanical tests for sealed portable secondary cells and batteries | |
| Secondary lithium cells and batteries for use in industrial applications - Part 1: Tests and requirements of performance | |
| Secondary lithium cells and batteries for use in industrial applications - Part 2: Tests and requirements of safety | |
| Secondary lithium cells for portable applications | |
| Secondary Reference Amorphous Solar Cells | |
| Secondary reference amorphous solar sub modules (Amendment 1) | |
| Secondary Reference Amorphous Solar Sub modules | |
| Secondary reference component cells | |
| Secondary Reference Crystalline Solar Cells | |
| Self-ballasted fluorescent lamps - Part 2: Performance specifications | |
| Self-ballasted fluorescent lamps for general lighting service | |
| Self-ballasted lamps for general lighting service - Part 1: Safety requirement | |
| Self-ballasted LED-lamps for general lighting services > 50 V - Performance requirements | |
| Self-ballasted LED-lamps for general lighting services by voltage > 50 V - Safety specifications | |
| Self-ballasted LED-lamps for general lighting services by voltage > 50 V | |
| Single cell and stack-performance test methods for solid oxide fuel cell (SOFC) | |
| Single-capped fluorescent lamps - Part 1: Safety specifications | |
| Single-capped fluorescent lamps - Part 2: Performance specifications | |
| Single-phase small power transformer for bell, indicator and remote-control relay -- Safety requirements | |
| Small Lamps for Household Use | |
| Small solid oxide fuel cell power systems - Part 1: General rules | |
| Small solid oxide fuel cell power systems - Part 2: General safety codes and safety testing methods | |
| Small solid oxide fuel cell power systems - Part 3: Performance testing methods and environment testing methods | |
| Small switches for indoor use | |
| Small-Sized Sealed Lead-Acid Batteries (Valve Regulated Types) Part 1: General Requirements, Functional Characteristics | |
| Small-Sized Sealed Lead-Acid Batteries (Valve Regulated Types) Part 2: Dimensions, Terminals and Marking | |
| Small-Sized Sealed Lead-Acid Batteries (Valve Regulated Types) Part 3: Safety Recommendations for Use in Electric Appliances | |
| Small-Sized Sealed Lead-Acid Batteries (Valve Regulated Types) | |
| Small-sized valve regulated lead-acid batteries\x97Part 1: General requirements, functional characteristics\x97M ethods of test | |
| Solar simulator for multi-junction solar cells and modules | |
| Solar simulators for amorphous solar cells and modules (Amendment 1) | |
| Solar simulators for amorphous solar cells and modules (Amendment 2) | |
| Solar Simulators for Amorphous Solar Cells and Modules | |
| Solar simulators for crystalline solar cells and modules (Amendment 2) | |
| Solar simulators for crystalline solar cells and modules | |
| Solar Simulators Used in Measuring Crystalline Solar Cells and Modules | |
| Spherical photovoltaic cell (SPVC) -- Measurement of photovoltaic current-voltage characteristics | |
| Standard incandescent lamps of luminous intensity | |
| Standards for safety design of electrical circuit in photovoltaic power generating systems for residential use | |
| Stationary lead-acid batteries - General requirements and methods of tests - Part 1: Vented types | |
| Stationary lead-acid batteries - Part 2-1: Valve regulated types - Methods of test | |
| Stationary lead-acid batteries - Part 2-2: Valve regulated types - Requirements | |
| Stationary Lead-Acid Batteries | |
| Stationary Nickel Cadmium Alkaline Batteries | |
| Stationary Sealed Lead-Acid Batteries (Valve Regulated Type) | |
| Structural Design and Installation for Residential Photovoltaic Array (Roof Mount Type) | |
| Surface Accessory for Rigid Metal Conduits | |
| Switches for household and similar fixed electrical installations - Part 2-2: Particular requirements - Electromagnetic remote-control switches (RCS) | |
| Switches for household and similar fixed-electrical installations - Part 1: General requirements | |
| Switches for household and similar fixed-electrical installations - Part 2-3: Particular requirements - Time-delay switches (TDS) | |
| Switches for Household and Similiar Fixed-Electrical Installations - Part 2-1: Particular Requirements - Electronic Switches | |
| Table Study Lamps for Fluorescent Lamps | |
| Table Study Lamps for Incandescent Lamps | |
| Tamperature Coeffieient Measuring Methods of Output Voltage and Output Current for Amorphous Solar Cells and Modules | |
| Temperature Coefficient Measuring Methods for Crystalline Solar Cells and Modules | |
| Temperature coefficient measuring methods of output voltage and output current for amorphous solar cells and modules (Amendment 1) | |
| Temperature coefficient measuring methods of output voltage and output current for crystalline solar cells and modules | |
| Temperature coefficient measuring methods of output voltage and output current for multi-junction solar cells and modules | |
| Test procedure of islanding detection measures for utility-interconnect ed photovoltaic inverters | |
| Testing and measurement techniques of small polymer electrolyte fuel cell power systems | |
| Testing methods for environment of small polymer electrolyte fuel cell power systems | |
| Testing methods for small polymer electrolyte fuel cell power systems | |
| Testing Methods for Wiring Devices | |
| Testing methods of power conditioner for grid interconnected small polymer electrolyte fuel cell power systems | |
| Testing procedure of islanding prevention measures for utility-interconnect ed small polymer electrolyte fuel cell power system power conditioners | |
| Testing Procedure of Long Discharge Rate Lead-Acid Batteries for Photovoltaic Systems | |
| Testing Procedure of Power Conditioner for Small Photovoltaic Power Generating Systems | |
| Thermostats | |
| Thin film photovoltaic (PV) modules | |
| Thin-film terrestrial photovoltaic (PV) modules - Design qualification and type approval | |
| Torch lamps (Amendment 1) | |
| Torch lamps | |
| Total luminous flux measurements on discharge lamps used for photometric standards | |
| Traffic signal lamps (Amendment 1) | |
| Traffic Signal Lamps | |
| Trolley Busways | |
| Tungsten halogen lamps (non-vehicle) | |
| Underfloor Ducts (Steel) | |
| Unplasticized Polyvinyl Chloride (UPVC) Boxes and Box Covers | |
| Unplasticized Polyvinyl Chloride (UPVC) Conduit |
| << Prev | Next >> |