Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
810
820
830
840
850
859
860
861
862
863
864
865
866
867
868
869
870
871
880
890
900
910
920
930
950
1000
1050
1100
1150
1200
1500
1620
| Product Name | Notes |
|---|---|
| "HLW" CERTIFICATION MARK REQUIRED CODE BOOKS - ASME LINED POTABLE WATER HEATERS CERTIFICATION & ACCREDITATION PACKAGE - INCLUDES ASME BPVC-IIA, BPVC-IIB, BPVC-IIC, BPVC-IV, BPVC-IX AND ASME CA-1 | |
| `HN' Specifications - General Requirements | |
| A Guide for Transportation Landscape and Environmental Design | |
| A publication providing insights into the methods used to repair small, existing, shop-fabricated steel Above-ground, Atmospheric Pressure, Vented, Tanks designed and used for Petroleum and Non-Petroleum storage | |
| Abrasion Resistance of Rubber Component | |
| Abrasion Resistance of Rubber Components | |
| Abrasion Resistance of Trim Materials | |
| Accelerated Ageing Flammability | |
| Adhesion of Coating on Vinyl Coated Fabrics | |
| Adhesion Test for Resinated Felt | |
| Adhesions Test for Resinated Felt | |
| Adhesive - Metal to Metal - Medium Viscosity | |
| Adhesive Neoprene | |
| Adhesive P.V.C. Coated Fabric Water Seal | |
| Adhesive Polystyrene Foam | |
| Adhesive PVC Coated Fabric Water Seal | |
| Aircraft Materials Fire Test Handbook | |
| Appearance of Trim Materials | |
| ASME HIGH PRESSURE VESSEL SAFETY VALVES ACCREDITATION SET - INCLUDES ASME BPVC SECTION II - PARTS A, B, C AND D, SECTION VIII - DIVISION III, SECTION IX, ASME PTC... | |
| BLEED - AIR PNEUMATE SYSTEMS FOR GAS TURBINE EQUIP | |
| Bond Strength of Dielectrically Embossed Trim Materials | |
| Bonded Cellulose Gasket Material | |
| Breakage Test - Door Panel Substrate | |
| Breaking Strength of Woven and Coated Fabrics | |
| Carpet - Woven - Latex Backed | |
| Carpet - Woven - Polyethylene Backed | |
| Cell Count in Expanded Vinyl Coated Fabrics | |
| Cleanability of Trim Materials | |
| Cleanability of Vinyl Roof Materials | |
| Cleanability of Woven Textiles | |
| Clear Matte Lacquer | |
| Coating for Gaskets | |
| Cold Resistance of Elastomers | |
| Cold Shock Test | |
| Cold Slam Test - Adhered Moulding and Extrusions | |
| Colour - Visual Comparison for Checking Colour Variations of Trim Materials | |
| Colour Bleeding (Crocking) of Trim Materials | |
| Colour Bleeding - Crocking - of Trim Materials | |
| Colourfastness to Light of Trim materials - Natural Weathering | |
| Colourfastness to Light of Trim Materials | |
| Compressed Asbestos Fibre Gasket Material | |
| Compression and Recovery of Automotive Textile Materials | |
| Compression Test of "ODDIE" Clip with Diaphragm, (GMHA Part NO. 92046532) | |
| Compression Test of \x93Oddie\x94 Clip with Diaphragm | |
| Content of Volatile Component in T10TM Plasticised Trim | |
| Content of Volatile Component in TIOTM Plasticized Trim | |
| CRACK RESISTANCE OF ABS BODY SIDE MOULDINGS BY ACCELERATED ENVIRONMENTAL TESTING | |
| Creasing Resistance of Vinyl Coated Trim Materials | |
| Creasing Resistance of Vinyl Coated Trim | |
| Crumbled Flexible Open Cell Polyether Foam | |
| Crystal Size Determination Using "Faxfilm" Replication | |
| Crystal Size Determination using Faxfilm Replication | |
| Cure Test for Painted Polypropylene Bumpers | |
| Data Exchange Standards - HL7 Clinical Document Architecture, Release 2 | |
| DESIGN AND SPECIFICATION GUIDE FOR HYDRAULIC PUMPS USED ON ADVANCED SURFACE CRAFT AND SUBMERSIBLE VEHICLES | |
| DESIGN CRITERIA FOR SEAWATER PUMPS | |
| DESIGN GUIDE FOR HYDRAULIC SYSTEMS FOR SUBMERSIBLE | |
| Determination of Adhesion of Elastomers to Glass and Painted Sheet Metal | |
| Determination of Coating Weight on Phosphated Panels | |
| Determination of Coatings Weight on Phosphated Panels | |
| Determination of Compressibility on Weatherstrips | |
| Determination of Compression Set | |
| Determination of Construction of Woven Body Cloth | |
| Determination of Dynamic Stiffness and Loss Of Angle of Elastomers | |
| Determination of Elastomer to Fabric Adhesion | |
| Determination of Endurance Life and The Settlement under Dynamic Stress of Engine and Strut Mounts | |
| Determination of Foam Formation in Plant Fluids | |
| Determination of Fogging Characteristics of Automotive Interior Trim Materials | |
| Determination of Fogging Contaminants in Vinyl - Coated Fabrics, Top Plies and Sheeting Via Use of Gas Chromatograph | |
| Determination of Fogging Contaminants in Vinyl-Coated Fabrics, Top Plies and Sheeting vis use of Gas Chromatograph | |
| Determination of Force Deflection and Creep Properties of Elastomers | |
| Determination of Force Deflection Characteristics and Creep Properties of Elastomers | |
| Determination of Indentation Hardness Durometer | |
| Determination of Mass Per Unit Area of Trim Materials | |
| Determination of Mildew Growth and Odour on Trim Materials | |
| Determination of Oil in Alkaline Cleaning Baths Used in Phosphate Pre-Treatment Systems | |
| Determination of Oil in Alkaline Clearing Baths Used in Phosphate Pre-Treatment Systems | |
| Determination of Oil Migration Properties of Sealers | |
| Determination of Permanent Set of Elastomers | |
| Determination of Plasticiser Migration from Plastics to Painted Surfaces | |
| Determination of Pressure Modules and Loss of Angle of Elastomers | |
| Determination of Pressure Modulus and Loss of Angle of Elastomers | |
| Determination of Resistance of Elastomers to Ozone | |
| Determination of Resistance to Abrasion | |
| Determination of Resistance to Cold Cracking | |
| Determination of Resistance to Heat for Rubber | |
| Determination of Seam Strength | |
| Determination of Softness & Softness Number for Trim Materials | |
| DETERMINATION OF STIFFNESS OF LEATHER TRIM MATERIALS | |
| Determination of Stitch Tear | |
| Determination of Tensile Stress and Strain Properties | |
| Determination of Tension Set Under Constant Elongation | |
| Determination of the Construction of Woven Body Cloth | |
| Determination of Torsional Force Defection of Elastomers | |
| Determination of Torsional Force Deflection of Elastomers | |
| Determination of Volume and Density of Elastomers | |
| Determination of Wear Resistance of Trim Materials (Taber Abraser Method) | |
| Determination of Yeild Height & Deflection at Constant Load on Finished Rubber parts | |
| Determination of Yield Height and Deflection at Constant Load on Finished Rubber Part | |
| Determination to Resistance to Cold Cracking | |
| Dimensional Stability of Painted Hardboards | |
| Disco Booth for Checking Reflected Optics | |
| Dye Stability of Dyed Fabrics (ColourFastness to Water) | |
| Effect of Expanding Agent on Surface Film on Expanded Vinyl Coated Fabric | |
| Effect of Sheet Metal Processing Lubricants on the Phosphate System - Provisional Specification | |
| Effect of Sheet Metal Processing Lubricants on the Phosphate System - Provisional Specifications | |
| Effects of Expanding Agents on Surface Film on Expanded Vinyl Coated Fabric | |
| Elongation of Unsupported Vinyl Sheeting | |
| Enamel - Spring Protective | |
| Enamel Low Gloss Black - for Road Wheels Used with HN 1056 | |
| Enamel Silver - Splatter Used with HN 1052 | |
| Environmental Cycling Test Procedure | |
| Environmental Testing of Components and Assemblies | |
| Flammability of Interior Materials | |
| Flexibility of Trim Fabrics | |
| Fluid - Anti-Corrosion | |
| Fluid: Anti Corrosion | |
| Foam - Flexible Open Cell Polyether Polyurethane | |
| Force Deflection Characteristics of Elastomeric Components Under Uni Axial Stress | |
| Force Deflection Characteristics of Elastomeric Components Under Uni-Axial Stress | |
| Gasket Material Bonded Asbestos | |
| GENERAL - ENVIRONMENTAL CONSIDERATIONS FOR MARINE VEHICLES | |
| General Purpose Moulding Material | |
| General Test Procedure for Finished Rubber Parts | |
| Grain Retention of Vinyl Coated Fabrics | |
| Grain Retention of Vinyl Trim Fabrics | |
| Gravelometer | |
| Grease - Plastic Lubricant | |
| Grease - Silicone for Light Loads & Plastic | |
| Grease - Silicone for Water Repelling Application | |
| Handbook of Model Rocketry | |
| Hard Drawn Steel Wire | |
| Health informatics - HL7 Personal Health Record System Functional Model, Release 1 (PHRS FM) | |
| Health informatics \x97 Individual case safety reports (ICSRs) in pharmacovigilance \x97 Part 1: Framework for adverse event reporting | |
| Health informatics \x97 Individual case safety reports (ICSRs) in pharmacovigilance \x97 Part 2: Human pharmaceutical reporting requirements for ICSR | |
| Health informatics HL7 version 3 Reference information model Release 1 | |
| Health Promotion in Midwifery Principles and practice | |
| Heat Durability Test for Air Cleaner Snorkel | |
| Heat Flow Characteristics of Sound Deadener Pad | |
| Heat Resistance of Trim Materials | |
| Heel Pad, Floor Carpet - Dielectric Bond Strength | |
| High Altitude Medicine and Physiology | |
| HIGH DEFINITION SURVEYS-HDS | |
| High Frequency Techniques: An Introduction to RF and Microwave Engineering | |
| High Temperature Sintering | |
| High Voltage Direct Current Transmission: Converters, Systems and DC Grids | |
| Historical Reliability Data for IEEE 3006 Standards: Power Systems Reliability | |
| History of the Asphalt Institute | |
| HN Specifications - General Requirements | |
| Hose - Radiator | |
| Hoses - Manifold & Heater | |
| Hot Dip Galvanised Steel Sheet and Strip | |
| Household Tumble Type Clothes Dryers | |
| HYDRAULIC FLUIDS FOR MARINE VEHICLES | |
| HYDRAULIC SYSTEM DESIGN CRITERIA FOR ADVANCED MARINE SURFACE VEHICLES | |
| HYDROGEN EVOLUTION TEST | |
| Hydrogen Sulphide Staining Resistance on Vinyl Materials | |
| Impact Test | |
| Indentation Hardness of Foam Filled Assemblies | |
| Ink Ber Walnut | |
| Inspection of Above-ground, Atmospheric Pressure, Vented, Bolted \x93CHIME\x94 Tanks Designed and Used for Petroleum and Non-Petroleum Storage | |
| Kaylo Thinner No. 300 | |
| Lacquer Water Dispersed | |
| Lubricant - Vacuum Servo Brake Leather Seals | |
| Lubricant - Vacuum Servo Brake Rubber Components | |
| Manufacturer Disclosure Statement for Medical Device Security | |
| MATERIALS FOR FLUID SYSTEMS OF MARINE VEH. | |
| Micro Hardness Test | |
| MICROSCOPIC MEASUREMENT OF DRY FILM BUILD THICKNESS | |
| Mirror - Rear Vision - Alloy Type | |
| Mod\xe8le fonctionnel d'un syst\xe8me de dossier informatis\xe9 de sant\xe9 (S-DIS) HL7, publication 1.1 | |
| Moulding Adhesion Test (Pluck Test) | |
| Noise Control in Fluid Power Systems of Marine Vehicles | |
| Oven Ageing of Trim Materials | |
| PACKING AND LAGGING MATERIAL, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE | |
| PACKING FIBER, ANIMAL OR PLANT; SHEET (FOR) LUBRICATING AND FUEL-OIL | |
| Packing Material, Asbestos, Metallic Cloth and Tape | |
| PACKING MATERIAL, ASBESTOS, METALLIC CLOTH, SHEET AND TAPE | |
| PACKING MATERIAL, ASBESTOS, ROD, HIGH-PRESSURE | |
| PACKING MATERIAL, NONASBESTOS, FIBROUS GLASS METALLIC AND PLAIN CLOTH AND TAPE | |
| PACKING MATERIAL, SEMIMETALLIC | |
| PACKING, ASBESTOS, ROD, BRAIDED | |
| PACKING, ASBESTOS, ROPE AND WICK | |
| PACKING, ASBESTOS, VALVE-STEM | |
| PACKING, FABRIC, CONDENSER-TUBE | |
| PACKING, METALLIC AND NONMETALLIC, PLASTIC | |
| PACKING, SPIRAL, GLAND, LOW-PRESSURE | |
| PACKING; ASBESTOS, SHEET, COMPRESSED | |
| PACKING; RUBBER-SHEET, CLOTH-INSERT | |
| PACKING; SEMIMETALLIC | |
| Pad - Engine Hood Silencer | |
| Pads - Seat Cushion - Latex Foam | |
| Paint Cleaning Efficiency Test | |
| Paint Compatibility With Purge Solvent | |
| PAPER, ASBESTOS | |
| PAPER, GASKET: FIBER (ANIMAL OR PLANT), SHEET | |
| Part II Tests Index | |
| Particle Board | |
| Peel Strength Test for Multi Layer Plastic Fuel Tanks | |
| Peel Strength Test For Multilayer Plastic Fuel Tanks | |
| Percentage Stretch and Stretch Set of Woven Textiles | |
| Performance Evaluation Procedures for Household Clothes Washers | |
| Perspiration Resistance of Interior Trim Materials | |
| Perspiration Staining Resistance of Vinyl Fabric | |
| Perspiration Staining Resistance of Vinyl Fabrics | |
| PHENOLIC-CONDENSATIO N-PRODUCTS; LAMINATED (FOR ELECTRICAL PURPOSES) | |
| PIPE-COVERING; MINERAL-WOOL (MOLDED-TYPE AND BLANKET-TYPE FOR HEATED PIPES) | |
| Plastic Moulding Material Electrical - High Heat Resistance | |
| Plastic Moulding Material General Purpose | |
| Plasticiser Evaporation of Vinyl Trim Materials | |
| Plasticiser Migration of Vinyl Trim Materials | |
| Pliability of Vinyl Material | |
| Presence of Water in Lubricating Oils (Crackle Test) | |
| Primer - Nitro Cellulose Red Oxide | |
| Printing Dye | |
| Purge Solvent Efficiency Test | |
| REFRACTORY, CASTABLE MIX AND PLASTIC MIX | |
| Reinforced Plastic Material | |
| Resistance of Elastomers to Oils and Greases | |
| Resistance to Arcing or Charring of Dielectrically Embossed Materials | |
| Resistance to Cold Cracking of Vinyl Coated Fabrics | |
| Resistance to Marring or Scuffing | |
| Resistance to Odour | |
| Resistance to Oil Staining | |
| Resistance to Ravel of Woven Textiles | |
| Resistance to Scraping of Coatings on Elastomers | |
| Resistance to Water Spotting of Textile Materials | |
| Resistance to Weathering of Rubber Components | |
| Resistance to Wicking of Vinyl Coated Roof Covering Material | |
| Retention of Fabric Tapes to Foam Seat Pads | |
| Roller Shear Fatigue Test for Polyurethane Foam | |
| Roller Shear Gatigue Test for Polyurethane Foam | |
| ROOFING FELT (ASBESTOS, ASPHALT SATURATED) | |
| ROOFING FELT, COAL TAR AND ASPHALT SATURATED ORGANIC FELTS, ROLLS | |
| Safety and effectiveness of health IT software and systems - Part 3: Application of risk management | |
| Safety and effectiveness of health IT software and systems-Part 1: Fundamental concepts, principles, and requirements | |
| Safety and effectiveness of health IT software and systems\x97Part 4: Application of human factors engineering | |
| Salt Spray (Mist) Testing (Neutral) | |
| Salt Spray - Mist- Testing - Neutral | |
| Scab Corrosion Test | |
| Scuff Resistance | |
| Sealer - Engine Hood | |
| Sealer - Non Hardening | |
| Sealer Non-Hardening | |
| Sealer Underbody - High Temperature Cure | |
| Sealer Underbody - Low Temperature Cure | |
| Seam Strength of Trim Materials | |
| SEAWATER SYSTEM DESIGN CRITERIA FOR ADVANCED MARIN | |
| Semi-Rigid Polyether Foam | |
| Shoe Dip - Bonded Brakes | |
| Shrinkage Resistance of Trim Materials | |
| Single Strand Pull | |
| Single Strand PullCloth | |
| Solids Content Determination of Zinc Phosphate Baths | |
| Specification for Multilayer Hybrid Circuits | |
| Staining - Contact and Migration of Organic Finishes by Rubber | |
| Staining of Non Embossed and Dielectrically Embossed Vinyl Coated Fabrics | |
| Staining of Non-Embossed and Dielectrically Embossed Vinyl Coated Fabrics | |
| Staining P.V.C. Coated Fabrics by Other Materials | |
| Staining PVC Coated Fabrics by Other Materials | |
| Standard Conditions for Testing Woven and Non Woven Textiles and Coated Fabrics | |
| Standard Conditions for Testing Woven and Non-Woven Textiles and Coated Fabrics | |
| Standard Laboratory Practice for Home Laundering Fabrics Prior to Flammability Testing to Differentiate Between Durable and Non-Durable Finishes | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING - PART 1: SPECIFICATIONS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO PROVISIONAL STANDARDS PART 1: SPECIFICATIONS AND PRACTICES M 29\x96M 355 AND R 30\x96R 121 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO PROVISIONAL STANDARDS PART 1: SPECIFICATIONS AND PRACTICES M 6\x96M 358 AND R 5\x96R 132 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO PROVISIONAL STANDARDS PART 2: TEST METHODS T 11\x96T 419 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO PROVISIONAL STANDARDS PART 2: TEST METHODS T 11\x96T 424 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO PROVISIONAL STANDARDS PART 3: PROVISIONAL STANDARDS MP 37\x96MP 49, PP 94\x96PP 127, TP 127\x96TP 150 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and AASHTO PROVISIONAL STANDARDS PART 3: PROVISIONAL STANDARDS MP 46\x96MP 47, PP 94\x96PP 118, AND TP 120\x96TP 145 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING AND AASHTO PROVISIONAL STANDARDS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS - PART 1: SPECIFICATIONS AND PRACTICES M 6\x96M 352 AND R 5\x96R 118 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS - PART 1A: SPECIFICATIONS AND PRACTICES | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS - PART 2: TEST METHODS T 11\x96T 411 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS - PART 2A: TEST METHODS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS - PART 3: PROVISIONAL STANDARDS MP 24\x96MP 48, PP 85\x96PP 114, AND TP 113\x96TP 144 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS - PART 3: PROVISIONAL STANDARDS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 1: SPECIFICATIONS AND PRACTICES | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 2: TEST METHODS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 3: PROVISIONAL STANDARDS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS PART 3: PROVISIONALS | |
| Standard specifications for transportation materials and Methods of sampling and testing and provisional standards: Part 1 | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS: PART 2 TESTS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS: PART 3 PROVISIONALS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING and PROVISIONAL STANDARDS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING, AND AASHTO PROVISIONAL STANDARDS | |
| STANDARD SPECIFICATIONS for TRANSPORTATION MATERIALS and METHODS OF SAMPLING AND TESTING | |
| Standard Test Panels for Paint Testing Elastomers | |
| Stress Crack Resistance of Plastics | |
| Stretch and Set of Automotive Materials | |
| Stretch Set Test for Automotive Fabrics (Lear Method) | |
| Surface Porosity of Polyurethane Foam Pads | |
| Surveillance and Evaluation Enhancements for "New Entrant" Air Carriers | |
| Tape - Rear Vision Mirror | |
| TAPE, ADHESIVE, LEAD FOIL | |
| TAPE, ASBESTOS | |
| TAPE, PRESSURE-SENSITIVE ADHESIVE, PLASTIC (FOR ELECTROPLATING) | |
| TAPE, RUBBER (NATURAL AND SYNTHETIC), INSULATING | |
| Tear Strength of Knitted and Non Woven Textile Materials | |
| Tear Strength of Knitted and Non-Woven Textile Materials | |
| Tear Strength | |
| Tearing Strength of Unsupported Vinyl Sheeting | |
| Tensile Strength and Elongation | |
| Test for Creasing Resistance of Laminated Fabrics | |
| Test for Dimensional Stability of Laminated Fabrics | |
| Test for Elongation and Stretch Set of Automotive Fabrics | |
| Test Method for Wet Paint Samples | |
| Test Methods for Wet Paint Samples | |
| Tests for Dimentional Stability of Laminated Fabrics | |
| THE HISTORY AND RATIONALE OF MIL-STD-810 | |
| The Resistance of Elastomers to Fuel | |
| Thickness Determination of Trim Materials | |
| Thickness of Expanded Vinyl Coated Fabric | |
| Thickness of Expanded Vinyl Coated Fabrics | |
| Top Coat Adhesion of Vinyl Coated Trim Materials | |
| Topcoat Adhesion of Vinyl Coated Trim Materials | |
| Torque maintainance of Radiator Hoses | |
| Torque Maintenance of Radiator Hoses | |
| Transmission Oil | |
| TUBE; FLEXIBLE, NONMETALLIC, ELECTRICAL | |
| Undercoat Wood Grain | |
| UNDERWATER FLUID SYSTEM EQUIPMENT AND COMPONENTS | |
| Unfilled Polypropylene Compounds | |
| Water Absorption of Door Panel Substrate | |
| Water Resistance of Unsewn & Sewn Tonneau Cover Fabrics | |
| Water Resistance of Unsewn and Tonneau Cover Fabrics | |
| Wear or Abrasion on Seat Squirm Machine | |
| Wear Resistance of Vinyl Materials | |
| Weatherstrip - Foam Rubber | |
| Weight Determination of Polyethylene-backed Floor Covering materials by Solvent Extraction | |
| Weight Determination of Polyurethane Backed Floor Covering Materials by Solvent Extraction | |
| WINDSCREEN WASHER FLUID RESISTANCE |
| << Prev | Next >> |