Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
110
120
130
140
150
159
160
161
162
163
164
165
166
167
168
169
170
171
180
190
200
210
220
230
250
300
350
400
450
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| (R) A Guide to Aircraft Turbine Engine Vibration Monitoring Systems | |
| (R) Aerospace - System Integration Factors That Affect Hydraulic Pump Life | |
| (R) Aerospace Fuel System Specifications and Standards | |
| (R) Aerospace Hydraulic Fluids Physical Properties | |
| (R) AEROSPACE LANDING GEAR SYSTEMS TERMINOLOGY | |
| (R) Aerospace, Slipper Seals, Selection for Fluid Power Applications | |
| (R) AGE CONTROL OF AGE SENSITIVE ELASTOMERIC MATERIALS | |
| (R) Air Cargo Unit Load Devices - Reference Documents | |
| (R) Aircraft Damage Caused by Ground Support Equipment | |
| (R) Aircraft Flotation Analysis | |
| (R) Aircraft Humidification | |
| (R) AIRLINE TOW TRACTOR - BAGGAGE/CARGO FACTORS FOR DESIGN CONSIDERATION | |
| (R) Anti Blow-By Design Practice for Cap Seals | |
| (R) Capacitive Fuel Gauging System Accuracies | |
| (R) Clamp Loads and Bending Stresses in Aircraft Tubing Installations | |
| (R) CONTROL OF WATER CARRYOVER FROM THE ENVIRONMENTAL CONTROL SYSTEM AND CONDENSATION ON THE STRUCTURE | |
| (R) COOLING OF MILITARY AVIONIC EQUIPMENT | |
| (R) Cross Reference for Materials for Fluid Systems Components Including Military and Federal Specifications and Their International Equivalents | |
| (R) Design, Development and Test Criteria - Solid State Proximity Switches/Systems for Landing Gear Applications | |
| (R) Designing for Long Life With Elastomers | |
| (R) Designing with Elastomers for use at Low Temperatures, Near or Below Glass Transition | |
| (R) ELECTRICAL CONNECTORS AND WIRING, COMPATIBILITY OF | |
| (R) Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS | |
| (R) Environmental Control System Contamination | |
| (R) ENVIRONMENTAL DEGRADATION OF TEXTILES | |
| (R) Fuel Level Control Valves and Systems | |
| (R) Glossary of Technical and Physiological Terms Related to Aerospace Oxygen Systems | |
| (R) Guide For The Design Of Threaded Screw Or Stud Type Electrical Equipment Terminations | |
| (R) Guide to Aircraft Turbine Engine Vibration Monitoring Systems | |
| (R) GUIDE TO ENGINE LUBRICATION SYSTEM MONITORING | |
| (R) Guide to Temperature Monitoring in Aircraft Gas Turbine Engines | |
| (R) Handbook of Hydraulic Metric Calculations | |
| (R) Heat Sinks for Airborne Vehicles | |
| (R) In-Flight Thrust Determination | |
| (R) Information on Antiskid Systems | |
| (R) Inlet Total-Pressure-Disto rtion Considerations for Gas-Turbine Engines | |
| (R) Installations/Applic ations, Development, and Test Criteria - Solid State Proximity Switches/Systems for Landing Gear Applications | |
| (R) Lessons Learned from Developing, Implementing, and Operating a Health Management System for Propulsion and Drive Train Systems | |
| (R) MANUFACTURERS' IDENTIFICATION OF AEROSPACE ELECTRICAL AND ELECTRONIC WIRING DEVICES AND ACCESSORIES | |
| (R) Manufacturers\x92 Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories | |
| (R) Minimization of Electrostatic Hazards in Aircraft Fuel Systems | |
| (R) Overview and History of Aircraft Inerting Systems | |
| (R) Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems | |
| (R) Plain Bearing Selection for Landing Gear Applications | |
| (R) Power Sources for Fluidic Controls | |
| (R) Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft | |
| (R) Rotor Blade Electrothermal Ice Protection Design Considerations | |
| (R) SAE Aerospace Applied Thermodynamics Manual Aerothermodynamic Systems Engineering and Design | |
| (R) SAE Aerospace Applied Thermodynamics Manual Ice, Rain, Fog, and Frost Protection | |
| (R) SELF-SEALING BREAKAWAY VALVES FOR CRASH-RESISTANT AIRCRAFT FUEL SYSTEMS | |
| (R) Standard Impulse Machine Equipment and Operation | |
| (R) THESAURUS FOR FUEL SYSTEM COMPONENTS | |
| (R) Trademarks, Hydraulic System Component Manufacturers, Index of | |
| 8000 psi Hydraulic Systems: Experience and Test Results | |
| A Guide to Aircraft Turbine Engine Vibration Monitoring Systems | |
| A METHOD OF GROUND RESONANCE TESTING FOR HELICOPTERS | |
| A Primer of Aircraft Multiplexing | |
| Achieving Electromagnetic Compatibility of Gas Turbine Engine Accessories, for Self-Propelled Vehicles, Methods of | |
| Acoustic Effects Produced by a Reflecting Plane | |
| Acoustical Considerations for Aircraft Environmental Control System Design | |
| ACTUATION SYSTEM DATA SUMMARY FOR MISSILES AND LAUNCH VEHICLES | |
| Advanced Environmental Control System (AECS) Computer Program for Steady State Analysis and Preliminary System Sizing | |
| AEROSPACE FLUID POWER AND CONTROL / ACTUATION SYSTEM GLOSSARY | |
| Aerospace Fluid System Standards, Metric, National and International | |
| Aerospace Fuel System Specifications and Standards | |
| Aerospace Hydraulic Fluids Physical Properties | |
| AEROSPACE INFORMATION REPORT FOR CONTINUOUS FLOW OXYGEN HOSE DISCONNECT FITTINGS (STABILIZED TYPE) | |
| Aerospace Information Report for Continuous Flow Oxygen Hose Disconnect Fittings | |
| Aerospace Landing Gear Systems Terminology | |
| Aerospace Military Aircraft Hydraulic System Characteristics | |
| Aerospace Pressurization System Design | |
| Aerothermodynamic Systems Engineering and Design | |
| Aerothermodynamic Test Instrumentation and Measurement | |
| Age Control of Age Sensitive Elastomeric Materials | |
| Air Cargo Unit Load Devices - Reference Standards | |
| Air Cargo Unit Load Devices - Use of Airworthiness Reference Documents | |
| Air Cargo Unit Load Devices \x96 Reference Documents | |
| AIR CONDITIONING OF AIRCRAFT AT HIGH ALTITUDE | |
| AIR TURBINE STARTER COMPOSITE OUTLINE DRAWINGS | |
| Airborne Internal Interface Standards for Moderate Bit Rate Digital Time Division- Multiplex Systems | |
| Airborne Internal Interface Standards for Moderate Bit Rate Digital Time Division-Multiplex Systems | |
| AIRBORNE MONITORING OF COMMERCIAL TRANSPORT AIRCRAFT FLUID SYSTEM AND EQUIPMENT PERFORMANCE | |
| Aircraft Cargo Door Opening/Sill Details for Ground Support Equipment Interface | |
| Aircraft Damage Caused by Ground Support Equipment | |
| AIRCRAFT ENGINE AND ACCESSORY DRIVES AND FLANGE STANDARDS | |
| Aircraft Engine Fuel Feed and Transfer Component Pressure Definitions | |
| Aircraft Engine Life Cycle Cost Guide | |
| AIRCRAFT ENVIRONMENTAL FACTORS FOR DESIGN CONSIDERATION | |
| Aircraft Fire Protection for Helicopter Gas Turbine Powerplant and Related Systems Installations | |
| Aircraft Flashtube Anticollision Lighting Systems | |
| AIRCRAFT FLEXIBLE TANKS GENERAL DESIGN AND INSTALLATION RECOMMENDATIONS | |
| Aircraft Flotation Analysis | |
| Aircraft Fuel System Pressure Definitions | |
| AIRCRAFT FUEL SYSTEM VAPOR-LIQUID RATIO PARAMETER | |
| Aircraft Fuel Weight Penalty Due to Air Conditioning | |
| Aircraft Humidification | |
| Aircraft Hydraulic System Characteristics | |
| Aircraft Inerting Systems | |
| AIRCRAFT NOSEWHEEL STEERING/CENTERING SYSTEMS | |
| Aircraft Sealant Removal Techniques | |
| Aircraft Tail Bumpers | |
| Airline Tow Tractor - Baggage/Cargo Factors for Design Consideration | |
| Airline Tow Tractor- Baggage/Cargo Factors for Design Consideration | |
| AIRPLANE AIR CONDITIONING ENGINEERING DATA - THERMODYNAMICS | |
| AIRPLANE AIR CONDITIONING ENGINEERING DATA, HEAT TRANSFER | |
| AIRPLANE HEATING AND VENTILATING EQUIPMENT ENGINEERING DATA FLUID DYNAMICS | |
| Animal Environment in Cargo Compartments | |
| Anti Blow-By Design Practice for Cap Seals | |
| Anti Blowby Design Practice for Cap-Strip Seals | |
| AS23053/12 Heat Shrink Sleeving Specification Change from Dielectric Strength to Breakdown Voltage | |
| AS36100 Background and Development Record | |
| AS36100 Background and Development | |
| Auxiliary Power System Considerations for Advanced Military Aircraft | |
| Ball-On-Cylinder (BOC) Aircraft Turbine Fuel Lubricity Tester | |
| BATTERY POWERED AIRCRAFT TOW TRACTORS - FACTORS FOR DESIGN CONSIDERATION | |
| Bibliography of References Pertaining to The Effects of Oxygen on Ignition and Combustion of Materials | |
| BIBLIOGRAPHY ON FUEL HANDLING & CONTAMINATION | |
| BIBLIOGRAPHY-LIGHTNI NG & PRECIPITATION STATIC | |
| Bibliography-Lossy Filters | |
| Boss - Plug/Pin, Expansion Type Hole Preparation | |
| CABLING GUIDELINES FOR ELECTROMAGNETIC COMPATIBILITY | |
| Capacitive Fuel Gauging System Accuracies | |
| Characteristics of Equipment Components, Equipment Cooling System Design, and Temperature Control System Design | |
| Clamp Loads and Bending Stresses in Aircraft Tubing Installations | |
| Clamp Material, Injection Molded | |
| Coanda/Refraction Concept for Gas Turbine Engine Test Cell Noise Suppression | |
| COCKPIT CENTER INSTRUMENT PANEL LAYOUT | |
| Cockpit Information Required for Helicopter Turbine Engine Operation and Maintenance | |
| COCKPIT VISIBILITY FOR COMMERCIAL TRANSP. AIRCRAFT | |
| COCKPIT VISIBILITY FOR COMMERCIAL TRANSPORT AIRCRAFT | |
| Common Termination Method, Electrical Wiring System, Application of | |
| COMPARISON OF GROUND-RUNUP AND FLYOVER NOISE LEV. | |
| Comparison of Hydraulic System Cleanliness Procedures and Requirements for Ten Aerospace Companies | |
| Concurrent Design of Engines and Specifications of Starting System for Helicopters | |
| Construction and Calibration of Parallel Plate Transmission Line for Electromagnetic Interference Susceptibility Testing | |
| Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs, Methods of | |
| Convenient Location of Oxygen Masks for Both the Crew and Passengers of Aircraft | |
| Cooling of Modern Airborne Electronic Equipment | |
| Corrosion Preventive Characteristics of Aircraft Greases | |
| Cross Reference for Materials for Fluid Systems Components, Including Military and Federal Specifications and Their International Equivalents | |
| CUSHION TOW HITCHES TEST | |
| DC Resistivity VS RF Impedance of EMI Gaskets | |
| Design of Threaded Screw or Stud Type Electrical Equipment Terminations, Guide for | |
| Design, Development and Test Criteria - Solid State Proximity Switches/Systems for Landing Gear Applications | |
| DESIGNING FOR LONG LIFE WITH ELASTOMERS (STABILIZED TYPE) | |
| Designing for Long Life with Elastomers | |
| Designing with Elastomers for Use at Low Temperatures, Near or Below Glass Transition | |
| DESIRED CHARACTERISTICS FOR HELICOPTER WHEELS, TIRES AND BRAKES | |
| Electrical Connectors and Wiring, Compatibility of | |
| ELECTROMAGNETIC COMPATIBILITY (EMC) SYSTEM DESIGN CHECKLIST * CNCL S/S BY SAE ARP60493, ARP5583, ARP5415 & MIL-STD-464 * | |
| Electromagnetic Compatibility (EMC) System Design Checklist | |
| Electromagnetic Compatibility on Gas Turbine Engines for Aircraft Propulsion | |
| Electromagnetic Interference on Aircraft from Jet Engine Charging | |
| EMC Antennas and Antenna Factors: How to Use Them | |
| Engineering Analysis System (EASY) Computer Program for Dynamic Analysis of Aircraft ECS | |
| ENVIRONMENTAL CONDITIONS APPLICABLE TO TRANSPORT AIRCRAFT ELECTRICAL EQUIPMENT | |
| Environmental Control System Contamination | |
| Environmental Control Systems Life Cycle Cost | |
| Environmental Criteria and Tests for Aerospace Ground Equipment in Support of Space Systems | |
| Environmental Degradation of Textiles | |
| Estimation of One-Third- Octave-Band Lateral Attenuation of Sound from Jet-Propelled Airplanes | |
| Estimation of One-Third-Octave-Ban d Lateral Attenuation of Sound from Jet-Propelled Airplanes | |
| Estimation of Total Error in Altimetry | |
| Evaluation of Helicopter Turbine Engine Linear Vibration Environment | |
| EXHAUST EMISSION LIMITS FOR DIESEL ENGINES USED IN AIRCRAFT GROUND SUPPORT EQUIPMENT AT AIRPORT ENVIRONMENTS | |
| FAA Regulations Covering the Use of Oxygen in Aircraft | |
| FAR - Regulatory Requirements Covering the Use of Breathing Oxygen in Aircraft | |
| FAULT ISOLATION IN ENVIRONMENTAL CONTROL SYSTEMS OF COMMERCIAL TRANSPORTS | |
| Final Report on Cold Starting of Reciprocating Aircraft Engines | |
| FIRE TEST EQUIPMENT FOR FLEXIBLE HOSE AND TUBE ASSEMBLIES (STABILIZED TYPE) | |
| Fire Test Equipment for Flexible Hose and Tube Assemblies | |
| FITTINGS, CATALOG OF FLARED, FLARELESS, PIPE THREADED, PORT, HOSE, AND OTHER TYPE TUBE STANDARD CONNECTORS | |
| FLEXURE FATIGUE STRENGTH OF TUBE FITTING JOINTS (STABILIZED TYPE) | |
| Flexure Fatigue Strength of Tube Fitting Joints | |
| Flexure Testing of Hydraulic Tubing Joints and Fittings by Planar Resonant Vibration (Free-Free Beam) | |
| Flight Compartment Glare | |
| FOUR WHEEL DRIVE AIRCRAFT TOW TRACTORS - FACTORS FOR DESIGN CONSIDERATION | |
| FUEL LEVEL CONTROL VALVES/SYSTEMS | |
| Gas Energy Limited Starting Systems | |
| Gas Turbine Coaxial Exhaust Flow Noise Prediction | |
| Glossary of Technical and Physiological Terms Related to Aerospace Oxygen Systems | |
| Ground Equipment Rebuild Program | |
| Ground Support Equipment Electrical Systems | |
| Guide for Installation of Electrical Wire and Cable on Aircraft Landing Gear | |
| GUIDE FOR THE DESIGN OF THREADED SCREW OR STUD TYPE ELECTRICAL EQUIPMENT TERMINATIONS | |
| Guide to Aircraft Turbine Engine Vibration Monitoring Systems | |
| Guide to Engine Oil System Monitoring | |
| Guide to Life Usage Monitoring and Parts Management for Aircraft Gas Turbine Engines | |
| Guide to Limited Engine Monitoring Systems for Aircraft Gas Turbine Engines | |
| Guide to Temperature Monitoring in Aircraft Gas Turbine Engines | |
| Handbook of Hydraulic Metric Calculations | |
| HANDLING AND INSTALLATION PRACTICE FOR AEROSPACE HOSE ASSEMBLIES | |
| Heat and Mass Transfer and Air-Water Mixtures | |
| Heat Sinks for Airborne Vehicles | |
| HELICOPTER & V/STOL AIRCRAFT NOISE MEASUREMENT | |
| HELICOPTER EXTERNAL NOISE ESTIMATION (STABILIZED TYPE) | |
| Helicopter External Noise Estimation | |
| High and Extended Vibration Environment | |
| Hose Assembly Identification Practices | |
| Hydraulic Energy Limited Engine Starting Systems | |
| Ice, Rain, Fog, and Frost Protection | |
| IDENTIFICATION AND CODING OF FLUID AND ELECTRICAL PIPING SYSTEM FUNCTIONS | |
| Identification of Standard Utility Parts - Bolts and Nuts | |
| Identification of Standard Utility Parts \x96 Bolts and Nuts | |
| In-Flight Thrust Determination | |
| Index of Starting System Specifications and Standards | |
| Information on Anti-Skid Systems | |
| Inlet Total-Pressure Distortion Considerations for Gas-Turbine Engines | |
| Inlet Total-Pressure- Distortion Considerations for Gas-Turbine Engines | |
| Inlet Total-Pressure-Disto rtion Considerations for Gas-Turbine Engines | |
| Installation and Use of Equilateral Triangle Cross-Section Hydraulic O-Ring Seal Backup Rings (Dyna-Baks) | |
| Installation of Liquid Oxygen Systems in Civil Aircraft | |
| Installation Procedures - Pin/Plug Expansion Type | |
| Interface Protective Devices - Ground Equipment to Aircraft | |
| Lessons Learned from Developmental and Operational Turbine Engine Monitoring Systems | |
| LIGHTNING PROTECTION & STATIC ELECTRIFICATION | |
| Limits and Fits - International Metric Tolerance System | |
| Liquid Cooling Systems | |
| Liquid Propellant Gas Generation Systems | |
| Maintenance of Batteries and Battery Charging and Servicing Facilities | |
| Manufacturers' Identification of Aerospace Electrical and Electronic Wiring Devices and Accessories | |
| Materials for Fluid Systems Components and Their International Equivalents | |
| MEASUREMENT OF NOISE FROM GAS TURBINE ENGINES | |
| METHODS FOR DETERMINING TURBINE NOZZLE AREA | |
| Methods of Achieving Electromagnetic Compatibility of Gas Turbine Engine Accessories, for Self-Propelled Vehicles | |
| Methods of Controlling Distortion of Inlet Airflow During Static Acoustical Tests of Turbofan Engines and Fan Rigs | |
| Minimization of Electrostatic Hazards in Aircraft Fuel Systems | |
| MINIMUM SAFETY REQUIREMENTS FOR SPECIAL PURPOSE AIRLINE GROUND SUPPORT EQUIPMENT (STABILIZED TYPE) | |
| Minimum Safety Requirements for Special Purpose Airline Ground Support Equipment | |
| MOLDED RIGID PLASTIC PARTS | |
| Number 70-90, 70L-90, 80-100, and 80L-100 Propeller Shaft Ends Dual Rotation (Propeller Supplied Bearing) | |
| OXYGEN SYSTEM AND COMPONENT CLEANING AND PACKAGING | |
| OXYGEN SYSTEM MAINTENANCE GUIDE | |
| Patterns of O-Ring Failures | |
| Penalties in Performance of Three-Phase, Four- Wire, 400-Cycle Motors Caused by the Opening of One Phase | |
| Penalties IN Performance of Three-Phase, Four-Wire, 400-Cycle Motors Caused by the Opening of One Phase | |
| Performance of Low Pressure Ratio Ejectors for Engine Nacelle Cooling | |
| Performance Testing of Gas Turbine Lube Oil Filter Elements | |
| Performance Testing of Lubricant Filter Elements Utilized in Aircraft Power and Propulsion Lubrication Systems | |
| PERFORMANCE/LOW PRESS. RATIO EJECTORS/ENG. COOLING | |
| PHOSPHATE ESTER AIRCRAFT HYDRAULIC FLUID CONTAMINATION WITH CHLORINE CONTAINING COMPOUNDS | |
| Physical Properties of Hydraulic Fluids | |
| Plain Bearing Selection for Landing Gear Applications | |
| Power Sources for Fluidic Controls | |
| PRACTICAL METHODS TO OBTAIN FREE-FIELD SOUND PRESSURE LEVELS FROM ACOUSTICAL MEASUREMENTS OVER GROUND SURFACES | |
| Prediction Method for Lateral Attenuation of Airplane Noise During Takeoff and Landing | |
| Prediction Procedure for Near-Field and Far-Field Propeller Noise | |
| PRESSURE DIE CAST AIRCRAFT WHEELS AND BRAKES - QUALITY EVALUATION | |
| Prestressing (Autofrettaging) of Hydraulic Tubing Lines | |
| Procedure for the Calculation of Airplane Noise in the Vicinity of Airports | |
| Procedure for the Calculation of Basic Emission Parameters for Aircraft Turbine Engines | |
| Propeller Shaft Ends - Dual Rotation (Engine Supplied Bearing) | |
| Radioisotope Power Systems | |
| Ramp De-Icing | |
| RECOMMENDATIONS FOR SELECTION AND USE OF TORQUE WRENCHES FOR AEROSPACE PROPULSION SYSTEMS APPLICATIONS | |
| Recommended Part Numbering Guidelines for Fluid System Components Inch System of Measurements | |
| Recommended Practice for Measurement of Static Mechanical Stiffness Properties of Aircraft Tires | |
| REPORT ON AIRCRAFT ENGINE CONTAINMENT | |
| Rotor Blade Electrothermal Ice Protection Design Considerations | |
| SAE Aerospace Applied Thermodynamics Manual Aerothermodynamic Systems Engineering and Design | |
| SAE Aerospace Applied Thermodynamics Manual Ice, Rain, Fog, and Frost Protection | |
| Safe Carriage of Impaired and Disabled Passengers | |
| Safety Criteria for Pneumatic Starting Sytems | |
| Selecting Slipper Seals for Hydraulic-Pneumatic Fluid Power Applications | |
| Self-Sealing Breakaway Valves for Crash-Resistant Aircraft Fuel Systems | |
| SERVICE DAMAGE LIMITS FOR AIRCRAFT HYDRAULIC TUBING | |
| SPACE TECHNOLOGY/CIVIL ENVIRONMENTAL PROTECTION | |
| Spacecraft Boost and Entry Heat Transfer | |
| Spacecraft Equipment Environmental Control | |
| Spacecraft Life Support Systems | |
| Spacecraft Thermal Balance | |
| Spark Igniter Semiconductor Resistance Measurement Using Controlled Energy Levels | |
| Spectrum Analyzers for Electromagnetic Interference Measurements | |
| SPIRAL FAILURE - "O" RING SEALS - LANDING GEAR SHOCK STRUTS | |
| Standard Impulse Machine Equipment and Operation | |
| Standard Words for Test Paragraphs for Tube Fittings and Tube Assemblies | |
| Starter System Optimization Start Analysis, Turbine Engine - Electric, Battery Power | |
| STRUCTURAL CHARACTERISTICS OF AIRCRAFT TUBING | |
| Study of Wrenching Engagement on AS870C Double Hexagon (12 Point) Fasteners | |
| Survey of Operating Practices with Propeller Ice Elimination Equipment | |
| System Integration Factors That Affect Hydraulic Pump Life | |
| THE ADVANCED ENVIRONMENTAL CONTROL SYSTEM (AECS) COMPUTER PROGRAM FOR STEADY STATE ANALYSIS AND PRELIMINARY SYSTEM SIZING | |
| The Coanda/Refraction Concept for Gas Turbine Engine Test Cell Noise Suppression | |
| Thermodynamics of Incompressible and Compressible Fluid Flow | |
| Thermophysical Characteristics of Working Fluids and Heat Transfer Fluids | |
| Thermophysical Properties of the Natural Environment, Gases, Liquids, and Solids | |
| Thesaurus for Fuel System Components | |
| TIN PLATED SOLDERLESS TERMINAL LUGS AND SPLICES ON NICKEL COATED HIGH TEMPERATURE WIRE | |
| Tire Spray Suppression - Airplane Design and Consideration for | |
| Tire Spray Suppression - Airplane Design Consideration and Testing for | |
| Torque Tightening Metric Screw Threaded Fasteners | |
| Torque Tightening Threaded Fasteners | |
| Trademarks, Hydraulics System Component Manufacturers, Index of | |
| Transmission Interlocks | |
| Twin Engine Helicopter Power Requirements | |
| Uncertainty of In-Flight Thrust Determination | |
| Upper Frequency Measurement Boundary for Evaluation of Shielding Effectiveness in Cylindrical Systems | |
| Use of Structural Carbon Heat Sink Brakes on Aircraft | |
| Vehicle Electrical Systems | |
| Verification of Landing Gear Design Strength | |
| Washer, Thermal Compensating, Metric Series | |
| Water Compatibility of Aircraft Greases | |
| Wide-Body and Standard- Body Aircraft Lower Deck Cargo Compartment ULD Capacities | |
| Wide-Body and Standard-Body Aircraft Lower Deck Cargo Compartment ULD Capacities |
| << Prev | Next >> |