Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
100
110
120
130
140
150
155
156
157
158
159
160
161
162
163
164
165
166
167
170
180
190
200
210
220
250
300
350
400
450
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| (RESTRICTED) ALLIED GUIDE TO DIVING OPERATIONS | |
| (RESTRICTED) CONFIDENTIALITY METADATA LABEL SYNTAX | |
| (RESTRICTED) CYBER SECURITY INFORMATION SHARING | |
| (RESTRICTED) DISCRETE SIGNAL INTERFACES | |
| (RESTRICTED) DIVING GAS QUALITY | |
| (RESTRICTED) DIVING SYSTEMS - OXYGEN CLEANING PROCEDURES AND STANDARDS | |
| (RESTRICTED) FRIENDLY FORCE TRACKING SYSTEMS (FFTS) INTEROPERABILITY | |
| (RESTRICTED) GUIDANCE FOR DEPENDABILITY IN-SERVICE | |
| (RESTRICTED) GUIDANCE FOR DEVELOPING DEPENDABILITY REQUIREMENTS | |
| (RESTRICTED) INSTRUCTIONS PERMANENTES POUR LA LIAISON 16 OTAN | |
| (RESTRICTED) INT\xc9GRATION DES SYST\xc8MES D\x92A\xc9RONEFS T\xc9L\xc9PILOT\xc9S (RPAS) DANS L\x92ESPACE A\xc9RIEN | |
| (RESTRICTED) M\xc9CANISME DE LIAISON DE M\xc9TADONN\xc9ES | |
| (RESTRICTED) NATO WEAPONS INTELLIGENCE TEAM (WIT) CAPABILITIES | |
| (RESTRICTED) PERSONAL PROTECTIVE AND FIREFIGHTING EQUIPMENT REQUIREMENTS FOR FIRE AND EMERGENCY OPERATIONS | |
| (RESTRICTED) POLICY ON CONFIGURATION MANAGEMENT | |
| (RESTRICTED) PROTECTED CORE NETWORKING (PCN) DEPLOYABLE ENVIRONMENT SPECIFICATIONS | |
| (RESTRICTED) SERVICES TO FORWARD FRIENDLY FORCE INFORMATION TO WEAPON DELIVERY ASSETS | |
| (RESTRICTED) STANDARD OPERATING PROCEDURES FOR NATO LINK 11 AND LINK 11B | |
| (RESTRICTED) STANDARD OPERATING PROCEDURES FOR NATO LINK 16 | |
| (RESTRICTED) STANDARD UNMANNED TEST PROCEDURES AND ACCEPTANCE CRITERIA FOR UNDERWATER BREATHING APPARATUS | |
| (RESTRICTED) SUPER HIGH FREQUENCY (SHF) MILITARY SATELLITE COMMUNICATIONS (MILSATCOM) EPM WAVEFORM FOR CLASS B SERVICES | |
| (RESTRICTED) SUPER HIGH FREQUENCY (SHF) MILITARY SATELLITE COMMUNICATIONS (MILSATCOM) FREQUENCY DIVISION MULTIPLE ACCESS (FDMA) NON-EPM MODEM FOR SERVICES CONFORMING TO CLASS-B OF STANAG 4484 | |
| (RESTRICTED) TACTICS TECHNIQUES AND PROCEDURES (TTP) FOR ESTABLISHING AIR TRAFFIC CONTROL (ATC) IN TIMES OF CRISIS AND CONFLICT | |
| (RESTRICTED) TECHNICAL STANDARDS FOR HF RADIO LINK LAYER AND APPLICATION SUPPORT PROTOCOLS FOR SINGLE CHANNEL WAVEFORMS | |
| (RESTRICTED) THE CORE SET OF CONFIGURATION MANAGEMENT CONTRACTUAL REQUIREMENTS | |
| (RESTRICTED) WEB SERVICES MESSAGING PROFILE (WSMP) | |
| A CALCULATION OF RELIEVING REQUIREMENTS IN THE CRITICAL REGION | |
| A Compendium of Case Law: Federal Jurisdiction over \x93Navigable Waters\x94/\x93Water s of the United States\x94 | |
| A Critical Review of Recent Literature on Toxicity of Cyanides to Fish | |
| Abbreviated Form of Agreement Between Owner and Contractor for Construction Projects of Limited Scope Where the Basis of Payment is a Stipulated Sum; Instruction Sheet A107-87 | |
| Abrasive Blast Cleaning of Concrete and Cementitious Materials SSPC-SP CAB 1 \x96 Thorough Blast Cleaning | |
| Abrasive Blast Cleaning of Concrete and Cementitious Materials SSPC-SP CAB-2 \x96 Intermediate Blast Cleaning | |
| Abrasive Blast Cleaning of Concrete and Cementitious Materials SSPC-SP CAB-3 \x96 Brush Blast Cleaning | |
| Abrogation sheet of Tables CEI UNEL 951 series | |
| Absorption and Drug Development: Solubility Permeability and Charge State | |
| Acceptable Methods, Techniques, And Practices - Aircraft Alterations | |
| ACCEPTABLE METHODS, TECHNIQUES, AND PRACTICES - AIRCRAFT INSPECTION AND REPAIR | |
| ACCEPTABLE METHODS, TECHNIQUES, AND PRACTICES AIRCRAFT INSPECTION AND REPAIR (Incorporates Changes 1 thru 3) | |
| ACCEPTANCE CRITERIA FOR FLEXIBLE FLASHING MATERIALS | |
| Acceptance Criteria for Qualification of Post-Installed Adhesive Anchors in Concrete (ACI 355.4-10) and Commentary | |
| ACCEPTED INDUSTRY PRACTICE FOR INDUSTRIAL DUCT CONSTRUCTION | |
| Accepted Industry Practices for Sheet Metal Lagging | |
| Access Control Guideline - Dye Sublimination Printing Practices for PVC Access Control Cards | |
| Access Control Standard Protocol for the 26-bit Wiegand Reader Interface | |
| Accessory housings | |
| Achieving Common Sense Environmental Regulation: Oil and Gas Exploration & Production | |
| Acne Scars: Classification and Treatment | |
| ACU Field Guide | |
| Acute Pain Management | |
| Acute Respiratory Distress Syndrome | |
| AD 2000-Regulations - Structure, application and method guidelines | |
| ADA PROGRAMMING LANGUAGE (ANSI/MIL STD 1815A-1983) | |
| ADDRESS LIST FOR REGIONAL AIRPORTS DIVISIONS AND AIRPORTS DISTRICT/FIELD OFFICES | |
| Adhesives - Peel Test for a Flexible-Bonded-to- Rigid Test Specimen Assembly - Part 1: 90 Degree Peel First Edition; (CEN EN 28510-1: 1993) | |
| ADIPIC ACID CAS # 124-04-9 ORAL RISK ASSESSMENT DOCUMENT | |
| Adoption of ISO/IEC 14102:2008 Information Technology\x97Guidel ine for the Evaluation and Selection of CASE Tools | |
| Adoption of ISO/IEC 15026-2:2011 Systems and Software Engineering\x97Syste ms and Software Assurance\x97Part 2: Assurance Case | |
| Adoption of ISO/IEC 15026-3-Systems and Software Engineering-Systems and Software Assurance-Part 3: System Integrity Levels | |
| Adoption of ISO/IEC 15026-4-Systems and Software Engineering-Systems and Software Assurance-Part 4: Assurance in the Life Cycle | |
| Adoption of ISO/IEC 15288:2002 Systems EngineeringSystem Life Cycle Processes | |
| Adoption of ISO/IEC 15939:2007\x97System s and Software Engineering\x97Measu rement Process | |
| Adoption of ISO/IEC 20000-1:2011, Information technology-Service management-Part 1: Service management system requirements | |
| Adoption of ISO/IEC 20000-2:2012, Information technology-Service management - Part 2: Guidance on the application of service management systems | |
| Adoption of ISO/IEC 26513:2009 Systems and Software Engineering\x97Requi rements for Testers and Reviewers of Documentation | |
| Adoption of ISO/IEC 26514:2008 Systems and Software Engineering\x97Requi rements for Designers and Developers of User Documentation | |
| Aeronautical Decision Making | |
| Agricultural machinery - Safety - Part 12: Rotary disc and drum mowers and flail mowers | |
| Agricultural machinery - Safety - Part 13: Large rotary mowers | |
| Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors | |
| Agricultural machinery \x97 Safety \x97 Part 11: Pick-up balers | |
| Agricultural machinery \x97 Safety \x97 Part 16: Portable agricultural grain augers | |
| Agricultural tractor \x97 Rear-mounted power take-off types 1, 2 and 3 \x97 Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone | |
| Agricultural tractors - Front-mounted equipment - Part 3: Power take-off: General specifications and location | |
| Agricultural tractors - Front-mounted equipment - Part 4: Three-point linkage | |
| Agricultural tractors - Hydraulic pressure for implements | |
| Agricultural tractors - Rear-mounted power take-off types 1, 2, 3 and 4 - Part 2: Narrow-track tractors, dimensions for master shield and clearance zone | |
| Agricultural tractors \x97 Instructional seat | |
| Agricultural tractors and machinery - General purpose quick-action hydraulic couplers | |
| Agricultural tractors and machinery - Power take-off drive shafts and power-input connection - Part 2: Specification for use of PTO drive shafts, and position and clearance of PTO drive line... | |
| Agricultural tractors and machinery - Power take-off drive shafts and power-input connection \x97 Part 1: General manufacturing and safety requirements | |
| Agricultural vehicles \x97 Mechanical connections between towed and towing vehicles \x97Part 3: Tractor drawbar | |
| Agricultural wheeled tractors - Rear-mounted three-point linkage - Categories 1N, 1, 2N, 2, 3N, 3, 4N and 4 | |
| Agricultural wheeled tractors - Three-point hitch couplers - Part 1: U-frame coupler | |
| Agricultural wheeled tractors \x97 Front-mounted equipment \x97 Part 1: Power take-off and three-point linkage | |
| Agricultural wheeled tractors \x97 Front-mounted equipment \x97 Part 2: Stationary equipment connection | |
| Air Contaminants in Metalcasting: Evaluation & Control_Text Only | |
| AIR VEHICLE MATERIALS AND PROCESSES | |
| Aircraft Electrical And Electronic System Lightning Protection | |
| Aircraft Electrical Wiring Interconnection Systems Training Program | |
| Aircraft Fire Extinguishing Agents for Airports | |
| AIRCRAFT FIRE EXTINGUISHING AGENTS | |
| AIRCRAFT FUEL STORAGE, HANDLING, AND DISPENSING ON AIRPORTS | |
| Aircraft Ground Handling and Servicing | |
| Aircraft Ground Handling, Servicing, and Marshalling | |
| Aircraft Secondary Barriers And Alternate Flight Deck Security Procedures | |
| Airframe and Powerplant Mechanics General Handbook | |
| AIRPORT DESIGN STANDARDS - SITE REQUIREMENTS FOR TERMINAL NAVIGATIONAL FACILITIES, REPRINT INCORPORATES CHANGES 1-2 | |
| AIRPORT DESIGN STANDARDS-TRANSPORT AIRPORTS | |
| Airport Drainage Design | |
| AIRPORT FIRE AND RESCUE VEHICLE SPECIFICATION GUIDE | |
| AIRPORT IMPROVEMENT PROGRAM GRANT ASSURANCE NUMBER ONE - GENERAL FEDERAL REQUIREMENTS | |
| AIRPORT LIGHTING EQUIPMENT CERTIFICATION PROGRAM | |
| Airport Pavement Design And Evaluation | |
| AIRPORT RESEARCH AND TECHNICAL REPORTS | |
| AIRPORT SIGNING AND GRAPHICS | |
| AIRPORT SNOW AND ICE CONTROL | |
| Airspace Co-Ordination Notice - Aerial Survey Walney Isle of Man Bioflight | |
| Alberta Building Code 2006 Volume 1 & 2 | |
| Allgemeine Grundsaetze fuer Werkstoffe | |
| Allgemeiner Standsicherheitsnach weis fuer Druckbehaelter - Behaelter auf Standzargen | |
| Aluminium and aluminium alloys - Wrought materials | |
| Aluminum Brazing Handbook | |
| Aluminum Casting Alloys | |
| Aluminum Casting Applications | |
| Aluminum Casting Defects: Gas Porosity and Shrinkage Porosity | |
| Aluminum Casting Defects: Oxides and Inclusions | |
| Aluminum Casting Production | |
| Aluminum Design Manual | |
| An Analysis of High Voltage Components Within an Automobile\x92s Supply Chain | |
| Analysis for cyclic loading | |
| ANNOUNCEMENT OF AVAILABILITY -- REPORT NO. DOT/FAA/PP/92-6, ESTIMATING THE REGIONAL ECONOMIC SIGNIFICANCE OF AIRPORTS | |
| ANNOUNCEMENT OF AVAILABILITY MICRO-PAVER, PAVEMENT MANAGEMENT SYSTEM (PMS) | |
| ANNOUNCEMENT OF AVAILABILITY REPORT NO. DOT/FAA/PP/87-1 MEASURING THE REGIONAL ECONOMIC SIGNIFICANCE OF AIRPORTS | |
| ANNOUNCEMENT OF AVAILABILITY--STANDA RDIZED BASIC AIRCRAFT RESCUE AND FIREFIGHTING CURRICULUM (A BASIC ARFF TRAINING COURSE) | |
| ANNOUNCEMENT OF AVAILABILITY-NATIONA L PLAN OF INTEGRATED AIRPORT SYSTEMS (NPIAS) 1993-1997 | |
| ANNOUNCEMENT OF AVAILABILITY-PLANNIN G THE STATE AVIATION SYSTEM | |
| Approval of Area Navigation Systems for Use in the U.S. National Airspace System | |
| APPROVED AIRPORT EQUIPMENT | |
| Aqueous Post Solder Cleaning Handbook | |
| Arc Flash Analysis\x97Utility System Parameters Critical for Accurate PPE | |
| Assessment of defects in walls of pressure vessels made of glass | |
| Ausruestung der Druckbehaelter - Ausruestungsteile | |
| Austenitic and austenitic-ferritic steels | |
| Automatic milking installations \x97 Requirements and testing | |
| Automatic Pressure Altitude Encoding Systems And Transponders Maintenance And Inspection Practices | |
| Auxiliary Power Unit | |
| Aviation Maintenance Alerts No. 254 | |
| Aviation Safety Reporting Program | |
| Aviation Weather Services | |
| Avoid Arc-Flash Occurrences by Following Industry Standards | |
| Berechnung von Druckbehaeltern | |
| Berechnung von Rohrbiegungen und Boegen | |
| Besondere Druckbehaelter - Ammoniaklagerbehaelt eranlagen | |
| Besondere Druckbehaelter - Druckbehaelter fuer Gase oder Gasgemische in fluessigem Zustand | |
| Besondere Druckbehaelter - Druckbehaelter in Kaelteanlagen und Waermepumpenanlagen | |
| Besondere Druckbehaelter - Fahrzeugbehaelter fuer fluessige, koernige oder staubfoermige Gueter | |
| Besondere Druckbehaelter - Fluessiggaslagerbeha elteranlagen | |
| Besondere Druckbehaelter - Rotierende dampfbeheizte Zylinder | |
| Besondere Druckbehaelter - Steinhaertekessel | |
| BINDING PROFILE MODIFICATION PROPOSAL MANAGEMENT | |
| Boltings | |
| Bolts and nuts made from ferritic steels | |
| BOOMS: FLOATING OIL AND DEBRIS CONTAINMENT, DEPLOYABLE (FOR HARBOR USE) | |
| BUILDINGS FOR STORAGE AND MAINTENANCE OF AIRPORT SNOW AND ICE CONTROL EQUIPMENT AND MATERIALS | |
| Calculation of pressure vessels - Experimental design method | |
| Cast iron materials - Austenitic cast iron with lamellar graphite | |
| Cast iron materials - Spheroidal-graphite cast iron non-alloy and low alloy | |
| Cast iron with lamellar graphite (grey cast iron) non-alloy and low alloy | |
| Cast steel | |
| Certification Guidance For Installation Of Non-Essential, Non-Required Aircraft Cabin Systems & Equipment (CS&E) | |
| Certification Maintenance Requirements | |
| Certification Of Transport Category Rotorcraft | |
| CHANGE #2 TO DESIGN OF AIRCRAFT DEICING FACILITIES | |
| Clad steels | |
| Cleanliness of Recycled Ferrous Metallic Abrasives | |
| Compatibility between Smoke Alarms and Arc-Fault Circuit Interrupters | |
| Complete Set Of ABMA Standards | |
| Composite Aircraft Structure | |
| CONFIDENTIALITY METADATA LABEL SYNTAX (CMLS) \x96 IMPLEMENTATION GUIDANCE | |
| CONFIDENTIALITY METADATA LABEL SYNTAX INFORMATION EXCHANGE PACKAGE DOCUMENTATION | |
| Conical shells subjected to internal and external overpressure | |
| Construction regulations - Design examination, final testing and pressure testing of piping | |
| Construction regulations - Metal piping | |
| Construction regulations - Piping made of glass reinforced thermosetting plastics (GRP) with and without liner - Manufacture and testing of pressure vessels | |
| Construction regulations - Thermoplastic piping - Manufacture and testing of pressure vessels | |
| CONTINUOUS AIRPORT SYSTEM PLANNING PROCESS | |
| Copper and wrought copper alloys | |
| Correct Wires Are Installed On The Fire Control Panel | |
| Corrosion Control for Aircraft | |
| Creep stress for steels | |
| Criteria For Approval Of Category I And Category II Weather Minima For Approach | |
| Cylindrical shells subjected to external overpressure | |
| Damage Tolerance And Fatigue Evaluation Of Structure | |
| Design and construction | |
| Design Considerations For Minimizing Hazards Caused By Uncontained Turbine Engine And Auxiliary Power Unit Rotor And Fan Blade Failures | |
| Design examination | |
| Design Guidelines for ACU | |
| Design of plain rectangular tubes and sectional headers | |
| Designing And Demonstrating Aircraft Tolerance To Portable Electronic Devices | |
| Detecting And Reporting Suspected Unapproved Parts | |
| Development Assurance For Electronic Hardware | |
| Directives for the arrangement of manholes and inspection ports | |
| Domed ends subject to internal or external pressure | |
| Drainage Manual Volume 1-Policy | |
| DTR for Each SSI in Boeing D6-35022 | |
| Dual Locking Devices on Fasteners | |
| Dynamic Evaluation Of Seat Restraint Systems And Occupant Protection On Transport Airplanes | |
| Ebene Boeden und Platten nebst Verankerungen | |
| ED A, Ver. 1; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http://nso.nato.int/ nso, Phone: +32 (0)2 \x96 707 5556, email: nso@nso.nato.int. For... | |
| Electrical Supplies For Emergency Conditions | |
| Electrical Wire Arcing | |
| Elevator Torque Tube Collars | |
| Eligibility, Quality, And Identification Of Aeronautical Replacement Parts | |
| Engine Fire Protection 33.17 | |
| Engine Fire Protection \xa7 33.17 | |
| Engineering Series Ratings: Is It Practical? | |
| Establishing Levels of Selective Coordination for Low Voltage Circuit Breakers | |
| ESTABLISHMENT OF AIRPORT ACTION GROUPS | |
| Evaluation of Aircraft Landing Gear Ground Flotation Characteristics for Operation From Unsurfaced Soil Airfields | |
| Evaluation of stresses determined by way of calculation and experimental stress analysis | |
| EXAMPLES OF CM PLAN REQUIREMENTS | |
| FAA Quality Control System Certification Program | |
| FAA SPECIFICATION FOR L-823, PLUG AND RECEPTACLE, CABLE CONNECTORS | |
| Failure of Fuel and Oil Hoses | |
| Failure of the Sprag Clutch to Lock in the Driving Direction | |
| Failure of the Wing Hinge Pin | |
| Ferrous Metallic Abrasive | |
| Final testing and pressure testing | |
| Fire Prevention Requirements | |
| Fire Protection Systems | |
| Flammability Requirements for Aircraft Seat Cushions | |
| Flammability Tests | |
| Flansche | |
| Flat products of unalloyed and alloy steels | |
| Fokker Service Bulletins SBF100-78-010 and SBF100-31-036 | |
| Forming and Operating a Flying Club | |
| Fuel Selector Valve | |
| Fuel System | |
| Fuel Tank Baffles | |
| General verification of stability for pressure vessels - Allowing for thermal stresses in heat exchangers with solid headers | |
| General verification of stability for pressure vessels - Basic principles | |
| General verification of stability for pressure vessels - Verification of load-carrying capacity for horizontal vessels on saddle supports | |
| General verification of stability for pressure vessels - Vessels with nozzles subject to additional loadings | |
| General verification of stability for pressure vessels - Vessels with ring supports | |
| GENERATING ALTERNATIVE CONFIDENTIALITY METADATA LABELS | |
| Genral principles of design, manufacture and associated tests | |
| Goodyear L20HBMF Wheel Inspection | |
| Goodyear Outboard Wheel Halves | |
| Goodyear Wheel Rework | |
| GOVERNMENT ACTIVITIES FOR DEFENCE SYSTEMS DEPENDABILITY | |
| Government Aircraft Operations | |
| GUIDANCE FOR CLASSIFICATION AND ANALYSIS OF DEPENDABILITY EVENTS | |
| GUIDANCE ON CONFIGURATION MANAGEMENT | |
| Guidance On Testing And Installation Of Rechargeable Lithium Battery And Battery Systems On Aircraft | |
| Guidance on the 2010 ADA Standards for Accessible Design | |
| Guidance On The Balanced Approach To Noise Management | |
| GUIDANCE ON THE DIGITAL LABELLING OF NATO INFORMATION | |
| GUIDE SPECIFICATION FOR WATER/FOAM AIRCRAFT RESCUE AND FIRE FIGHTING VEHICLES | |
| Guide to the Americans with Disabilities Act Accessibility Guidelines | |
| GUIDELINES AND PROCEDURES FOR MAINTENANCE OF AIRPORT PAVEMENTS | |
| Guidelines for component testing of clamp-bolts | |
| Guidelines For Design Approval Of Aircraft Data Link Communication Systems Supporting Air Traffic Services (ATS) | |
| Guidelines for meeting the essential safety requirements of the Pressure Equipment Directive when using AD 2000-Merkblaetter on pressure vessels, piping and fittings | |
| Hazards of Working on Energized Electrical Equipment | |
| Heat Gain from Adjustable Speed (Variable Frequency) Drives | |
| Heat Gain from Electrical and Control Equipment in Industrial Plants\x97Part 2 | |
| Heat treatment - Aluminium and aluminium alloys | |
| Heat treatment - Austenitic steels | |
| Heat treatment - Ferritic steels | |
| Heat treatment - General principles | |
| HELIPORT DESIGN | |
| Hydraulic Valve Tappet Body and Plunger Assembly | |
| IEC Advisory Committee on energy efficiency (ACEE) Case study: electric motors | |
| IEC Advisory Committee on energy efficiency (ACEE) Case study: low-voltage electrical installations | |
| IEC Advisory Committee on energy efficiency (ACEE) Introduction to ACEE work | |
| In-Flight Radiation Exposure | |
| Industrial Coating and Lining Application Specialist Qualification and Certification | |
| Inspection Program Revision Structure | |
| Integrating Helicopter and Tiltrotor Assets into Disaster Relief Planning | |
| ISUZU ADHESIVES/SEALERS RENEWAL | |
| LAND ACQUISITION AND RELOCATION ASSISTANCE UNDER THE AIRPORT DEVELOPMENT AID PROGRAM | |
| Leitfaden fuer die systematische Durchfuehrung einer Risikoanalyse und -bewertung | |
| List of all standards quoted in the AD 2000 Code | |
| Magnetos | |
| Main Landing Gear Drag Strut | |
| MAINTENANCE REVIEW BOARD PROCEDURES | |
| Maintenance Review Boards, Maintenance Type Boards, And OEM/TCH Recommended Maintenance Procedures | |
| Maintenance Review Boards, Maintenance Type Boards, and Original Equipment Manufacturer/Type Certificate Holder Recommended Maintenance Procedures | |
| Manufacture and testing of fittings made of unalloyed and alloyed steels | |
| Manufacture and testing of joints - Non-destructive testing of welded joints | |
| Manufacture and testing of joints - Principles of welding practice | |
| Manufacture and testing of joints - Production testing of welds, testing of the parent metal after post-weld heat treatment | |
| Manufacturers' Service Documents | |
| Materials for low temperatures - Ferrous materials | |
| MEASUREMENT, CONSTRUCTION, AND MAINTENANCE OF SKID-RESISTANT AIRPORT PAVEMENT SURFACES | |
| METADATA BINDING MECHANISM (MBM) \x96 IMPLEMENTATION GUIDANCE | |
| Method for Assessing the Reduction Rate of Key Bioaerosols by Portable Air Cleaners Using an Aerobiology Test Chamber | |
| Method for Measuring Performance of Portable Household Electric Room Air Cleaners | |
| Method for Measuring the Performance of Portable Household Electric Room Air Cleaners Following Accelerated Particulate Loading | |
| Method for Sound Testing of Portable Household Electric Room Air Cleaners | |
| Method of Assessing the Reduction Rate of Chemical Gases by a Room Air Cleaner | |
| Milking machine installations \x97 Mechanical tests | |
| Milking machine installations\x97Con struction and performance | |
| Milking machine installations\x97Voc abulary | |
| Mineral and Slag Abrasives | |
| MINIMUM STANDARDS FOR COMMERCIAL AERONAUTICAL ACTIVITIES ON PUBLIC AIRPORTS | |
| MODULAR VAULT SYSTEMS | |
| Molded Case Circuit Breaker Systems Testing with Conductors | |
| MULTI-LINK STANDARD OPERATING PROCEDURES FOR TACTICAL DATA SYSTEMS EMPLOYING LINK 16, LINK 11, LINK 11B, IJMS, LINK 1, LINK 4, AND ATDL-1 | |
| Nahtlose Hohlkoerper aus unlegierten und legierten Staehlen fuer Druckbehaeltermaente l | |
| NATO C3 Technical Architecture | |
| NATO CM TRAINING PACKAGE | |
| NATO Configuration Management Guidance on the Application of ACMPs 1 to 6 | |
| NATO Configuration Management Terms and Definitions | |
| NATO CORE METADATA SPECIFICATION (NCMS) - IMPLEMENTATION GUIDANCE | |
| NATO CORE METADATA SPECIFICATION(NCMS) | |
| NATO Interoperability Standards and Profiles Volume 1 Introduction | |
| NATO MESSAGE TEXT FORMATTING SYSTEM (FORMETS) - CONCEPT OF FORMETS (CONFORMETS) | |
| NATO MESSAGE TEXT FORMATTING SYSTEM (FORMETS) CONCEPT OF FORMETS (CONFORMETS) | |
| NATO MESSAGE TEXT FORMATTING SYSTEM (FORMETS) SYSTEM CONCEPT AND DESCRIPTION | |
| NATO Requirements for Configuration Audits | |
| NATO Requirements for Configuration Control - Engineering Changes, Deviations and Waivers | |
| NATO Requirements for Configuration Identification | |
| NATO Requirements for Configuration Status Accounting | |
| NATO Requirements for the Preparation of Configuration Management Plans | |
| NATO Supplement to ICAO Doc 8168- OPS/611 Volume II for the Preparation of Instrument Approach and Departure Procedures | |
| NATO Supplement to ICAO Doc 8168-OPS/611 Volume II for the Preparation of Instrument Approach and Departure Procedures | |
| NCI AGENCY CM TOOLS | |
| Obstruction Marking And Lighting | |
| Oeffnungen, Verschluesse und Verschlusselemente | |
| Office of Airport Safety and Standards Electronic Bulletin Board | |
| Openings in cylindrical, conical and spherical shells | |
| Parts And Materials Substitution For Vintage Aircraft | |
| Performance of pressure tests | |
| Pilot Windshear Guide | |
| PLANNING THE AIRPORT INDUSTRIAL PARK | |
| PLANNING THE METROPOLITAN AIRPORT SYSTEM | |
| Powerplant Guide For Certification Of Part 23 Airplanes And Airships | |
| Powerplant Installation and Propulsion System Component Fire Protection Test Methods, Standards, and Criteria | |
| PREDEFINED LEVELS OF CM REQUIREMENT BUILD-UP | |
| PREDESIGN, PREBID, AND PRECONSTRUCTION CONFERENCES FOR AIRPORT GRANT PROJECTS | |
| Pressure Fueling Valves | |
| Pressure Relief Valves | |
| Pressure vessel equipment - Marking | |
| Pressure vessels equipment - Equipment for detecting and limiting pressure and temperature - Equipment, installation and marking of pressure vessels | |
| Pressure vessels in glass fibre reinforced thermosetting plastics | |
| Pressure vessels made of glass | |
| Pressure vessels made of non-metallic materials - Pressure vessels, parts of pressure vessels and fittings made of electro-graphite and hard burned carbon | |
| Prevent Structural Failure | |
| Procedure testing for joining processes - Procedure testing for welded joints | |
| Procedures For Conducting Fuel System Hot Weather Operation Tests | |
| PROFILES FOR BINDING METADATA TO A DATA OBJECT | |
| Propeller Cylinder Attach Screws Failure | |
| Proposed Construction or Alteration of Objects that May Affect the Navigable Airspace | |
| Protection Of Aircraft Fuel Systems Against Fuel Vapor Ignition Caused By Lightning | |
| Protection Of Airplane Fuel Systems Against Fuel Vapor Ignition Due To Lightning | |
| Pruefung von Pressteilen aus Stahl sowie Aluminium und Aluminiumlegierungen | |
| Public Aircraft Operations | |
| Quality Assurance Controls for Product Acceptance Software | |
| Quality System For The Manufacture Of Composite Structures | |
| Recommendations on AFCI / Home Electrical Product Compatibility | |
| Recommended Inspection Procedures For Former Military Aircraft | |
| Recyclable Encapsulated Abrasive Media (in a compressible cellular matrix) | |
| Registered New Technologies for Automated Component Handling | |
| Repair Stations for Composite and Bonded Aircraft Structure | |
| Repairs And Alterations To Composite And Bonded Aircraft Structure | |
| REPORT NO. FAA-AAS-80-1, NATIONAL RUNWAY FRICTION MEASUREMENT PROGRAM (FINAL REPORT) | |
| Revised Powerplant Engineering Report No. 3A, Standard Fire Test Apparatus and Procedure (for Flexible Hose Assemblies) | |
| RTCA Document DO-160 Versions D, E, F, And G "Environmental Conditions And Test Procedures For Airborne Equipment" | |
| RTCA, Inc., Document RTCA/DO-254, Design Assurance Guidance For Airborne Electronic Hardware | |
| RUNWAY LENGTH REQUIREMENTS FOR AIRPORT DESIGN | |
| RUNWAY SURFACE CONDITION SENSOR SPECIFICATION GUIDE | |
| Safety devices against excess pressure - Bursting safety devices | |
| Safety devices against excess pressure - Safety valves | |
| Schmiedestuecke und gewalzte Teile aus unlegierten und legierten Staehlen | |
| Selective Coordination of Low-Voltage Circuit Breakers | |
| Self-Locking Nuts on Bolts Subject to Rotation | |
| Series Ratings | |
| Sicherheitseinrichtu ngen - PLT-Sicherheitseinri chtungen | |
| Simplified analysis for cyclic loading | |
| Single-ply bellows expansion joints | |
| Solid biofuels - Fuel specifications and classes - Part 4: Graded wood chips | |
| Special pressure vessels - Heat transfer installations | |
| Special pressure vessels - Pressure for gases or gas mixtures with operating temperatures below -10 \xb0C | |
| Special pressure vessels - Pressure vessels for fire extinguishers and vessels for fire-extinguishing agents | |
| Special pressure vessels - Pressure vessels in isostatic presses | |
| Special pressure vessels - Pressure vessels with lining or masonry lining | |
| SPECIFICATION FOR CONSTANT CURRENT REGULATORS AND REGULATOR MONITORS | |
|
SPECIFICATION FOR L-824 UNDERGROUND ELECTRICAL CABLE FOR AIRPORT LIGHTING CIRCUITS -- AC 150/5345-7D
|
SPECIFICATION FOR L-824 UNDERGROUND ELECTRICAL CABLE FOR AIRPORT LIGHTING CIRCUITS |
| SPECIFICATION FOR OBSTRUCTION LIGHTING EQUIPMENT | |
| SPECIFICATION FOR SERIES TO SERIES ISOLATION TRANSFORMERS FOR AIRPORT LIGHTING SYSTEMS | |
| STANDARD OPERATING PROCEDURES FOR NATO LINK 11 AND LINK 11B VOLUME 1 | |
| STANDARD OPERATING PROCEDURES FOR NATO LINK 16 VOLUME 1 | |
| STANDARD OPERATING PROCEDURES FOR NATO LINK 16 VOLUME 2 | |
| STANDARD OPERATING PROCEDURES FOR NATO LINK 22 | |
| Standard Specifications For Construction Of Airports | |
| STANDARD TO QUANTIFY THE CHARACTERISTICS OF GRANULAR CARBON DIOXIDE (CO2) ABSORBENT MATERIAL FOR DIVING AND HYPERBARIC APPLICATIONS | |
| STANDARDS FOR SPECIFYING CONSTRUCTION OF AIRPORTS | |
| Status of Federal Aviation Regulations | |
| Steel flanges | |
| Supplier Surveillance | |
| SURVIVABILITY PROGRAM ROTARY WING | |
| System Design and Analysis | |
| System Safety Analysis And Assessment For Part 23 Airplanes | |
| Systems And Equipment Guide For Certification Of Part 23 Airplanes And Airships | |
| Taking the Guesswork out of Selecting and Maintaining Molded Case Circuit Breakers | |
| Tellerboeden | |
| Test supervisors and testers in non-destructive testing | |
| Testing of steel sections | |
| The Certification Of Aircraft Electrical And Electronic Systems For Operation In The High-Intensity Radiated Fields (HIRF) Environment | |
| Thermal/Acoustic Insulation Flame Propagation Test Method Details | |
| Thick walled cylindrical shells subject to internal pressure | |
| To Address Fatigue Cracking Of Various Principal Structural Elements | |
| To Detect Out Of Tolerance Main Rotor Swashplate Bushing Retaining Plates | |
| To Prevent A Seat Belt From Detaching Due To A Loose Locknut And Attachment Bolt | |
| To Prevent An Uncommanded Squib Firing | |
| To Prevent High Electrical Resistance In The Squib Firing Circuit | |
| To Prevent Loss Of Airplane Control Or Engine Overspeed With Consequent Loss Of Engine Power Caused By The Power Levers Being Positioned Aft Of The Flight Idle Stop While The... | |
| Tractors and machinery for agricultural and forestry - Guards for power take-off (PTO) drive shafts \x97 Strength and wear tests and acceptance criteria | |
| Tractors and machinery for agriculture - Seat belts - Part 3: Requirements for assemblies | |
| Tractors for agriculture and forestry - Safety - Part 1: Standard tractors | |
| Tractors for agriculture and forestry - Safety - Part 2: Narrow-track and small tractors | |
| Tractors, machinery for agricultural and forestry, powered lawn and garden equipment \x97 Safety signs and hazard pictorials \x97 General principles | |
| Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Operator\x92s manuals - Content and format | |
| Transport Category Airplanes Cabin Ozone Concentrations | |
| Tubes made from non-alloyed and alloy steels | |
| Turbine Blade Rivet Failure | |
| U.S. AIR FORCE TECHNICAL ORDER (T.O.) 00-105E-9, AIRCRAFT EMERGENCY RESCUE INFORMATION (FIRE PROTECTION) | |
| Uniform Code for the Abatement of Dangerous Buildings | |
| USE OF NONDESTRUCTIVE TESTING IN THE EVALUATION OF AIRPORT PAVEMENTS | |
| Use Of Portable Electronic Devices Aboard Aircraft | |
| UTILITY AIRPORTS-AIR ACCESS TO NATIONAL TRANSPORTATION CONSOLIDATED, REPRINT INCORPORATES CHANGE 1 THRU 5 | |
| VAULT SYSTEM, ARMORY, ASSEMBLED | |
| VENETIAN BLINDS | |
| Visual Inspection for Aircraft | |
| Voluntary Disclosure Reporting Program | |
| Voluntary Industry Distributor Accreditation Program | |
| WARDROBE, WOOD, HOUSEHOLD | |
| WARDROBES AND JANITOR'S CLOSET, WOOD, STEEL FRAME | |
| WARDROBES WITH ACCESSORY PIECES, WOOD, STEEL FRAME | |
| WARDROBES, WOOD, GENERAL OFFICE | |
| Welding supervisors, welder | |
| Werkstoffe fuer Druckbehaelter - Verbindungselemente - Schrauben und Muttern aus austenitischen Staehlen | |
| Werkstoffe fuer Druckbehaelter - Verbindungselemente - Schrauben und Muttern aus Verguetungsstaehlen | |
| What is the Purpose of a Molded Case Circuit Breaker? | |
| WHEEL CHAIRS, FOLDING | |
| Wing Attach Angles and Doublers | |
| Zerstoerungsfreie Pruefung der Schweissverbindungen - Verfahrenstechnische Mindestanforderungen fuer die zerstoerungsfreien Pruefverfahren | |
| Zylinder- und Kugelschalen unter innerem Ueberdruck |
| << Prev | Next >> |