Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
60
70
80
90
100
103
104
105
106
107
108
109
110
111
112
113
114
115
120
130
140
150
160
170
200
250
300
350
400
450
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| A4A Publications Library | |
| BOLT MATERIALS, HIGH TEMP. W/EXPAN.COEFFICIANTS | |
| Building guards | |
| BUTT WELDS IN STILL TUBES FOR REFINERY SERVICE | |
| Canadian Supplement to AAMA/WDMA/ CSA 101/I.S.2/A440-17, North American Fenestration Standard/Specificati on for windows, doors, and skylights | |
| Communication process between ITU-T and Forums and Consortia Amendment 1: Procedures for preparation of liaison statements between scheduled meetings | |
| Communication process between ITU-T and Forums and Consortia Amendment 2: Change to IPR policy qualifying criteria | |
| Communication process between ITU-T and Forums and Consortia | |
| Composite Test Pattern Ten Layer Phototool | |
| Conception de b\xe2timents respectueuse des oiseaux | |
| Definition of Terms Relating to Steel Forgings | |
| Energy Performance Evaluation of Swinging Doors | |
| Energy Performance of Windows and Other Fenestration Systems/ User guide to CSA A440.2-04, Energy performance of windows and other fenestration systems | |
| Fenestration energy performance/User guide to CSA A440.2-09, Fenestration energy performance | |
| Fenestration energy performance/User Guide to CSA A440.2-14, Fenestration energy performance | |
| Fenestration energy performance/User Guide to CSA A440.2:19, Fenestration energy performance | |
| Fenestration energy performance/User Guide to CSA A440.2:22, Fenestration energy performance | |
| Generic Procedures for Including References to Documents of Other Organizations in ITU-T Recommendations Series A: Organization of the Work of the ITU-T | |
| Glass Content by the Modified McMaster Method | |
| Guide for Supplementary Conditions | |
| High exposure fenestration installation | |
| Installation des fen\xeatres, des portes et des lanterneaux | |
| Line Conventions | |
| Liquid Penetrant Inspection Of Steel Forgings | |
| Method of Normal Magnetic Induction Characteristics of Carbon and Alloy Steel Generator Rotor Forgings | |
| Method of Notch Toughness of Turbine and Generator Steel Forgings | |
| NATIONAL PLUMBING CODE | |
| Physical Test Methods for Hydraulic Cements, Supplementary Cementing Materials, and Cementitious Hydraulic Slag | |
| Procurement Guidelines for Consumables\x97Weldi ng and Allied Processes\x97Flux and Gas Shielded Electrical Welding Processes | |
| QUENCHED AND TEMPERED VACUUM TREATED CARBON AND ALLOY STEEL FORGINGS FOR PRESSURE VESSELS | |
| Rapid Test Method for Determining the Tendency of Silica Fume to Entrap Air in Mortar or Concrete | |
| Recommended Guide for Competitive Bidding Procedures and Contract Awards for Building Construction | |
| Recommended Practice for Use of Magnetic Type Instruments for Measurement of Thickness of Hot-Dip Zinc Coatings on Iron and Steel | |
| SPECIFICATION FOR ALUMINUM AND ALUMINUM ALLOY BARE WELDING RODS AND ELECTRODES | |
| Specification for Bare Aluminum and Aluminum-Alloy Welding Electrodes and Rods | |
| SPECIFICATION FOR CARBON STEEL ELECTRODES AND FLUXES FOR SUBMERGED ARC WELDING | |
| Specification for Carbon Steel Electrodes for Shielded Metal ArcWelding | |
| Specification for Filler Metal Standard Sizes, Packaging, and Physical Attributes | |
| Specification for Hot-Rolled Carbon Steel Sheets, Commercial Quality | |
| Specification for Hot-Rolled Carbon Steel Strip, Commercial Quality | |
| Specification for Leaded Carbon Steel Forged Pipe Flanges and Parts for Pressure and General Service | |
| Specification for Leaded, Carbon Steel Plates for Pressure Vessels | |
| SPECIFICATION FOR NICKEL AND NICKEL ALLOY BARE WELDING RODS AND ELECTRODES | |
| SPECIFICATION FOR NICKEL AND NICKEL ALLOY COVERED WELDING ELECTRODES | |
| Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods | |
| Specification for Nickel and Nickel-Alloy Welding Electrodes for Shielded Metal Arc Welding | |
| Specification for Nickel-Chromium-Iron Alloy Castings (35-15 Class) for High-Temperature Service | |
| SPECIFICATION FOR PRECIPITATION HARDENING ALLOY BARS, FORGINGS ANDFORGING STOCK FOR HIGH-TEMPERATURE SERVICE | |
| Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Copper-Nick el-Aluminum | |
| Specification for Solid Surfacing Welding Rods and Electrodes | |
| Specification for Steel Conveyor Chain | |
| Specification for Surfacing Electrodes for Shielded Metal Arc Welding | |
| SPECIFICATION FOR TITANIUM AND TITANIUM ALLOY BARE WELDING RODS AND ELECTRODES | |
| Specification for Titanium and Titanium-Alloy Welding Electrodes and Rods | |
| Specification for Tungsten and Oxide Dispersed Tungsten Electrodes for Arc Welding and Cutting | |
| Specification for Tungsten and Tungsten-Alloy Electrodes for Arc Welding and Cutting | |
| SPECIFICATION FOR TUNGSTEN ARC WELDING ELECTRODES | |
| SPECIFICATION FOR WELDING RODS AND COVERED ELECTRODES FOR CAST IRON | |
| STANDARD FILLER METAL PROCUREMENT GUIDELINES | |
| STANDARD FOR DETERMINATION OF HEARTWOOD IN PINES AND DOUGLAS-FIR | |
| Standard Form of Agreement Between Contractor and Subcontractor for a Design-Build Project | |
| STANDARD METHOD FOR ANALYSIS OF IMIDACLOPRID IN WOOD AND WATERBORNE FORMULATIONS | |
| STANDARD METHOD FOR ANALYSIS OF PROPICONAZOLE, TEBUCONAZOLE AND IMIDACLOPRID IN TREATED WOOD PRODUCTS BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY WITH MULTI-LEVEL INTERNAL STANDARDS | |
| STANDARD METHOD FOR DETERMINATION OF CYPROCONAZOLE IN SOLVENTBORNE WOOD TREATING SOLUTIONS BY HPLC | |
| STANDARD METHOD FOR DETERMINATION OF CYPROCONAZOLE IN WOOD EXTRACTS BY HPLC | |
| STANDARD METHOD FOR DETERMINATION OF MCS STABILIZER CONCENTRATION IN EL2 TREATED WOOD AND WOOD TREATMENT SOLUTIONS | |
| STANDARD METHOD FOR DETERMINATION OF NAPHTHENIC ACID IN COPPER NAPHTHENATE IN WOOD AND TREATING SOLUTIONS BY GAS CHROMATOGRAPHY | |
| STANDARD METHOD FOR DETERMINATION OF PERCENT BOUND ACETYL AND FREE ACETIC ACID IN ACETYLATED WOOD BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY | |
| STANDARD METHOD FOR DETERMINATION OF TECHNICAL PERMETHRIN AND PERMETHRIN ISOMERS BY HPLC USING UV DETECTION | |
| STANDARD METHOD FOR DETERMINING MCS STABILIZER CONCENTRATION IN EL2 TREATMENT SOLUTION SAMPLES BY TURBIDITY MEASUREMENT | |
| STANDARD METHOD FOR DETERMINING PENETRATION OF PROTECTANT IN ACETYLATED WOOD | |
| STANDARD METHOD OF ULTRASONIC EXAMINATION OF TURBINE AND GENERATOR STEEL ROTOR FORGINGS (R 1982) (E1-1986) | |
| STANDARD METHODS FOR ANALYSIS OF OIL-BORNE PRESERVATIVES | |
| Standard Methods for Classification Testing of Positional Capacity and Root Penetration of Welding Consumables in a Fillet Weld | |
| STANDARD METHODS FOR DETERMINATION OF THE DIFFUSIBLE HYDROGEN CONTENT OF MARTENSITIC, BAINITIC, AND FERRITIC WELD METAL PRODUCED BY ARC WELDING | |
| Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Test Method for Determination of Normal Consistency | |
| Standard Practice for Sampling, Testing, and Inspection | |
| Standard Practice for Steel Castings, Welding, Qualifications of Procedures and Personnel - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD PRACTICE FOR STEEL CASTINGS, WELDING, QUALIFICATIONS OF PROCEDURES AND PERSONNEL | |
| Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings | |
| Standard Procedures for Calibrating Magnetic Instruments to Measure the Delta Ferrite Content of Austenitic and Duplex Ferritic-Austenitic Stainless Steel Weld Metal | |
| STANDARD PROCEDURES FOR CALIBRATING MAGNETIC INSTRUMENTS TO MEASURE THE DELTA FERRITE CONTENT OF AUSTENITIC STAINLESS STEEL WELD METAL | |
| Standard Procedures for Determination of Moisture Content of Welding Fluxes and Welding Electrode Flux Coverings | |
| STANDARD SPECIFICATION FOR ALLOY AND STRUCTURAL ALLOY STEEL, SHEET AND STRIP, HOT-ROLLED AND COLD-ROLLED - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Alloy and Structural Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
| STANDARD SPECIFICATION FOR ALLOY-STEEL TURBINE-TYPE BOLTING MATERIAL SPECIALLY HEAT TREATED FOR HIGH-TEMPERATURE SERVICE (R 1989) | |
| STANDARD SPECIFICATION FOR ALLOY-STEEL TURBINE-TYPE BOLTING MATERIAL SPECIALLY HEAT TREATED FOR HIGH-TEMPERATURE SERVICE | |
| STANDARD SPECIFICATION FOR ALUMINUM-COATED STEEL CHAIN-LINK FENCE FABRIC - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM-COATED STEEL CHAIN-LINK FENCE FABRIC | |
| STANDARD SPECIFICATION FOR ALUMINUM-COATED STEEL WIRE STRAND - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ALUMINUM-COATED STEEL WIRE STRAND | |
| STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR AUSTENITIC DUCTILE IRON CASTINGS | |
| Standard Specification for Austenitic Gray Iron Castings - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR AUSTENITIC GRAY IRON CASTINGS | |
| STANDARD SPECIFICATION FOR AUSTENITIC STEEL FORGED AND BORED PIPE FOR HIGH-TEMPERATURE SERVICE | |
| STANDARD SPECIFICATION FOR BOLTING MATERIALS, HIGH-TEMPERATURE, 50 TO 120 KSI (345 TO 827 MPA) YIELD STRENGTH, WITH EXPANSION COEFFICIENTS COMPARABLE TO AUSTENITIC STEELS | |
| Standard Specification for Calcium-Silicon Alloys - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CALCIUM-SILICON ALLOYS | |
| STANDARD SPECIFICATION FOR CARBON STEEL CHAIN - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CARBON STEEL CHAIN | |
| Standard Specification for Carbon Steel Eyebolts - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CARBON STEEL EYEBOLTS | |
| Standard Specification for Carbon Steel Lifting Eyes | |
| Standard Specification for CARBON STEEL PLATES OF INTERMEDIATE TENSILE STRENGTH FOR FUSION-WELDED BOILERS AND OTHER PRESSURE VESSELS FOR INTERMEDIATE AND HIGHER TEMPERATIJRE SERVICE | |
| Standard Specification for Carbon Steel Plates of Intermediate Tensile Strength for Fusion-Welded Pressure Vessels for Atmospheric and Lower Temperature Service | |
| Standard Specification for CARBON STEEL PLATES WITH IMPROVED TRANSITION PROPERTIES | |
| STANDARD SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY (E1-1988) | |
| Standard Specification for Castings, Nickel and Nickel Alloy - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CASTINGS, NICKEL AND NICKEL ALLOY | |
| STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST AUSTENITIC STEEL COLD- WROUGHT PIPE FOR HIGH- TEMPERATURE SERVICE (R 1985) | |
| STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST AUSTENITIC STEEL PIPE FOR HIGH-TEMPERATURE SERVICE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST AUSTENITIC STEEL PIPE FOR HIGH-TEMPERATURE SERVICE | |
| Standard Specification for Centrifugally Cast Ferritic Alloy Steel Pipe for High-Temperature Service - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST FERRITIC ALLOY STEEL PIPE FOR HIGH-TEMPERATURE SERVICE | |
| Standard Specification for Chromium Metal - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CHROMIUM METAL | |
| STANDARD SPECIFICATION FOR CHROMIUM-NICKEL STAINLESS AND HEAT- RESISTING STEEL WEAVING WIRE (R 1987) | |
| Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire | |
| Standard Specification for Cold-Drawn Buttweld Carbon Steel Mechanical Tubing - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COLD-DRAWN BUTTWELD CARBON STEEL MECHANICAL TUBING | |
| Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COLD-FORMED WELDED AND SEAMLESS CARBON STEEL STRUCTURAL TUBING IN ROUNDS AND SHAPES | |
| STANDARD SPECIFICATION FOR COPPER-CLAD STEEL WIRE STRAND (R 1991) | |
| STANDARD SPECIFICATION FOR COPPER-CLAD STEEL WIRE STRAND - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Copper-Clad Steel Wire Strand | |
| Standard Specification for Deformed Billet Steel Bars for Concrete Reinforcement with 60,000 PSI Minimum Yield Strength | |
| STANDARD SPECIFICATION FOR DRAWING ALLOY STEEL, SHEET AND STRIP, HOT-ROLLED AND COLD-ROLLED - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled | |
| Standard Specification for Ductile Iron Castings for Paper Mill Dryer Rolls (Metric) | |
| STANDARD SPECIFICATION FOR DUCTILE IRON CASTINGS FOR PAPER MILL DRYER ROLLS | |
| STANDARD SPECIFICATION FOR ELECTRIC-RESISTANCE- WELDED CARBON AND ALLOY STEEL MECHANICAL TUBING | |
| Standard Specification for Electric-Resistance- Welded Carbon and Alloy Steel Mechanical Tubing - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for ELECTRIC-RESISTANCE- WELDED CARBON AND ALLOY STEEL MECHANICAL TUBING | |
| Standard Specification for Factory-Made Wrought Carbon Steel and Alloy Steel Welding Fittings of Seamless or Welded Construction for Low Temperature Service | |
| Standard Specification for Ferrite Ductile Iron Castings for Valves, Flanges, Pipe Fittings, and Other Piping Components | |
| STANDARD SPECIFICATION FOR FERRITIC MALLEABLE IRON CASTINGS (METRIC) (R 1989) (E1-1989) | |
| Standard Specification for Ferritic Malleable Iron Castings | |
| STANDARD SPECIFICATION FOR FERROCHROME-SILICON (R 1983) | |
| Standard Specification for Ferrochrome-Silicon - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Ferrochrome-Silicon | |
| Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for General Requirements for Carbon and Low Alloy Steel Tubes | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR CARBON, FERRITIC ALLOY, AND AUSTENITIC ALLOY STEEL TUBES | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR CARBON, FERRITIC ALLOY, AND AUSTENITIC STEEL TUBES | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT- RESISTING STEEL PLATE, SHEET, AND STRIP | |
| Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR FLAT-ROLLED STAINLESS AND HEAT-RESISTING STEEL PLATE, SHEET, AND STRIP | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR STAINLESS AND HEAT RESISTING WROUGHT STEEL PRODUCTS (EXCEPT WIRE) | |
| Standard Specification for GENERAL REQUIREMENTS FOR STAINLESS AND HEAT-RESISTING BARS, BILLETS AND FORGINGS | |
| Standard Specification for General Requirements for Stainless and Heat-Resisting Bars, Billets, and Forgings | |
| Standard Specification for General Requirements for Stainless Steel Bars, Billets, and Forgings | |
| Standard Specification for General Requirements for Stainless Steel Bars, Billets, Shapes, and Forgings - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WIRE RODS AND COARSE ROUND WIRE, CARBON STEEL (METRIC) | |
| Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel, and Alloy Steel | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR WIRE RODS AND COARSE ROUND WIRE, CARBON STEEL | |
| STANDARD SPECIFICATION FOR GRAY IRON CASTINGS (AASHTO M105) | |
| Standard Specification for Gray Iron Castings (Metric) | |
| STANDARD SPECIFICATION FOR GRAY IRON CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Gray Iron Castings | |
| Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings | |
| STANDARD SPECIFICATION FOR HEAT-TREATED CARBON STEEL JOINT BARS, MICROALLOYED JOINT BARS, AND FORGED CARBON STEEL COMPROMISE JOINT BARS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars | |
| STANDARD SPECIFICATION FOR HEX CAP SCREWS, BOLTS AND STUDS, STEEL, HEAT TREATED, 120/ 105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL USE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HEX CAP SCREWS, BOLTS AND STUDS, STEEL, HEAT TREATED, 120/ 105/90 KSI MINIMUM TENSILE STRENGTH, GENERAL USE | |
| Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use | |
| STANDARD SPECIFICATION FOR HIGH HARDENABILITY ANTIFRICTION BEARING STEEL - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for High Hardenability Antifriction Bearing Steel | |
| STANDARD SPECIFICATION FOR HIGH HARDENABILITY BEARING STEELS | |
| Standard Specification for HIGH-STRENGTH DEFORMED BILLET-STEEL BARS FOR CONCRETE REINFORCEMENT WITH 75,000 PSI MINIMUM YIELD STRENGTH | |
| STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW-ALLOY STRUCTURAL MANGANESE VANADIUM STEEL | |
| STANDARD SPECIFICATION FOR HIGH-STRENGTH STEEL BOLTS, CLASSES 10.9 AND 10.9.3, FOR STRUCTURAL STEEL JOINTS (METRIC) | |
| Standard Specification for High-Temperature Bolting, with Expansion Coefficients Comparable to Austenitic Stainless Steels - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HIGH-TEMPERATURE BOLTING, WITH EXPANSION COEFFICIENTS COMPARABLE TO AUSTENITIC STAINLESS STEELS | |
| STANDARD SPECIFICATION FOR HIGH-YIELD-STRENGTH, QUENCHED AND TEMPERED ALLOY STEEL PLATE, SUITABLE FOR WELDING - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HIGH-YIELD-STRENGTH, QUENCHED AND TEMPERED ALLOY STEEL PLATE, SUITABLE FOR WELDING | |
| Standard Specification for HOT-FINISHED BARS AND COLD-FINISHED BARS OF STAINLESS AND HEAT-RESISTING CHROMIUM-NICKEL-MANG ANESE STEEL | |
| STANDARD SPECIFICATION FOR HOT-FORMED WELDED AND SEAMLESS CARBON STEEL STRUCTURAL TUBING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing | |
| STANDARD SPECIFICATION FOR HOT-WORKED, HOT- COLD-WORKED AND COLD- WORKED ALLOY STEEL BARS AT ELEVATED TEMPERATURES | |
| STANDARD SPECIFICATION FOR HOT-WORKED, HOT-COLD-WORKED AND COLD-WORKED ALLOY STEEL FORGINGS AND FORGING BILLETS FOR HIGH STRENGTH AT ELEVATED TEMPERATURES | |
| STANDARD SPECIFICATION FOR HOT-WORKED, HOT-COLD-WORKED, AND COLD-WORKED ALLOY STEEL PLATE, SHEET, AND STRIP FOR HIGH STRENGTH AT ELEVATED TEMPERATURES | |
| Standard Specification for Low-Relaxation, Seven-Wire Steel Strand for Prestressed Concrete - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR LOW-RELAXATION, SEVEN-WIRE STEEL STRAND FOR PRESTRESSED CONCRETE | |
| STANDARD SPECIFICATION FOR MACHINE AND COIL CHAIN - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR MACHINE AND COIL CHAIN | |
| Standard Specification for Magnetic Particle Examination of Large Crankshaft Forgings - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR MAGNETIC PARTICLE EXAMINATION OF LARGE CRANKSHAFT FORGINGS | |
| STANDARD SPECIFICATION FOR METALLIC-COATED STEEL WIRE STRAND - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR METALLIC-COATED STEEL WIRE STRAND | |
| Standard Specification for Nickel and Nickel Alloy Castings | |
| STANDARD SPECIFICATION FOR PIPING FITTINGS OF WROUGHT CARBON STEEL AND ALLOY STEEL FOR LOW- TEMPERATURE SERVICE | |
| Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR PIPING FITTINGS OF WROUGHT CARBON STEEL AND ALLOY STEEL FOR LOW-TEMPERATURE SERVICE | |
| STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES, ALLOY STEEL, HIGH-STRENGTH, QUENCHED AND TEMPERED - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES, ALLOY STEEL, HIGH-STRENGTH, QUENCHED AND TEMPERED | |
| STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, FOR INTERMEDIATE- AND HIGHER-TEMPERATURE SERVICE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service | |
| Standard Specification for PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE - AND LOWER - TEMPERATURE SERVICE | |
| Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for PRESSURE VESSEL PLATES, CARBON STEEL, FOR MODERATE- AND LOWER-TEMPERATURE SERVICE | |
| STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, HIGH STRENGTH MANGANESE | |
| Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese | |
| STANDARD SPECIFICATION FOR PRESSURE VESSEL PLATES, CARBON STEEL, IMPROVED TRANSITION PROPERTIES | |
| Standard Specification for QUENCHED AND TEMPERED ALLOY STEEL BOLTS FOR STRUCTURAL STEEL JOINTS | |
| STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED STEEL BOLTS AND STUDS | |
| STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED VACUUM-TREATED CARBON AND ALLOY STEEL FORGINGS FOR PRESSURE VESSELS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED VACUUM-TREATED CARBON AND ALLOY STEEL FORGINGS FOR PRESSURE VESSELS | |
| Standard Specification for Rivets, Steel, Structural - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR RIVETS, STEEL, STRUCTURAL | |
| STANDARD SPECIFICATION FOR SEAMLESS AND ELECTRIC-WELDED LOW- ALLOY STEEL TUBES | |
| STANDARD SPECIFICATION FOR SEAMLESS AND ELECTRIC-WELDED LOW-ALLOY STEEL TUBES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR SEAMLESS AND ELECTRIC-WELDED LOW-ALLOY STEEL TUBES | |
| Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Seamless and Welded Carbon Steel Heat-Exchanger Tubes with Integral Fins | |
| STANDARD SPECIFICATION FOR SEAMLESS AND WELDED CARBON, FERRITIC, AND AUSTENITIC ALLOY STEEL HEAT-EXCHANGER TUBES WITH INTEGRAL FINS (R 1979) (E1-1984) | |
| Standard Specification for Seamless Stainless Steel Mechanical Tubing and Hollow Bar - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR SEAMLESS STAINLESS STEEL MECHANICAL TUBING | |
| Standard Specification for Silicomanganese - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Silicomanganese | |
| STANDARD SPECIFICATION FOR STAINLESS AND ALLOY-STEEL TURBINE-TYPE BOLTING SPECIALLY HEAT TREATED FOR HIGH-TEMPERATURE SERVICE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Stainless and Alloy-Steel Turbine-Type Bolting Specially Heat Treated for High-Temperature Service | |
| STANDARD SPECIFICATION FOR STAINLESS AND HEAT- RESISTING CHROMIUM- NICKEL-MANGANESE STEEL PLATE, SHEET, AND STRIP | |
| STANDARD SPECIFICATION FOR STAINLESS AND HEAT- RESISTING STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS | |
| STANDARD SPECIFICATION FOR STAINLESS AND HEAT-RESISTING STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS | |
| Standard Specification for STAINLESS AND HEAT-RESISTING STEEL FOR COLD HEADING AND COLD FORGING-BAR AND WIRE | |
| Standard Specification for STAINLESS AND HEAT-RESISTING STEEL FORGINGS | |
| Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STAINLESS STEEL BARS AND SHAPES FOR USE IN BOILERS AND OTHER PRESSURE VESSELS | |
| Standard Specification for Stainless Steel Forgings - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Stainless Steel Forgings | |
| STANDARD SPECIFICATION FOR STAINLESS STEEL ROPE WIRE | |
| Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Stainless Steel Wire and Wire Rods for Cold Heading and Cold Forging | |
| STANDARD SPECIFICATION FOR STEEL BARS AND SHAPES, CARBON ROLLED FROM "T" RAILS (R 1988) | |
| STANDARD SPECIFICATION FOR STEEL BARS AND SHAPES, CARBON ROLLED FROM "T" RAILS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Bars and Shapes, Carbon Rolled from \x93T\x94 Rails | |
| Standard Specification for STEEL BARS, ALLOY, HOT-ROLLED OR COLD-FINISHED, QUENCHED AND TEMPERED | |
| Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered | |
| Standard Specification for Steel Castings Suitable for Pressure Service - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL CASTINGS SUITABLE FOR PRESSURE SERVICE | |
| STANDARD SPECIFICATION FOR STEEL CASTINGS, CHROMIUM-NICKEL-IRON ALLOY (25-12 CLASS), FOR HIGH-TEMPERATURE SERVICE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL CASTINGS, CHROMIUM-NICKEL-IRON ALLOY (25-12 CLASS), FOR HIGH-TEMPERATURE SERVICE | |
| STANDARD SPECIFICATION FOR STEEL CASTINGS, FOR HIGHWAY BRIDGES | |
| STANDARD SPECIFICATION FOR STEEL CASTINGS, SUITABLE FOR PRESSURE SERVICE | |
| STANDARD SPECIFICATION FOR STEEL SHEET AND STRIP, ALLOY, HOT-ROLLED AND COLD-ROLLED, DRAWING QUALITY (R 1980) | |
| STANDARD SPECIFICATION FOR STEEL SHEET AND STRIP, ALLOY, HOT-ROLLED AND COLD-ROLLED, REGULAR QUALITY (R 1980) | |
| STANDARD SPECIFICATION FOR STEEL SHEET FOR PORCELAIN ENAMELING | |
| Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ALUMINUM-COATED, BY THE HOT-DIP PROCESS | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC- COATED (GALVANIZED) BY THE HOT-DIP PROCESS FOR CULVERTS AND UNDERDRAINS | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC- COATED (GALVANIZED) BY THE HOT-DIP PROCESS, STRUCTURAL (PHYSICAL) QUALITY | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-COATED (GALVANIZED) BY THE HOT-DIP PROCESS, STRUCTURAL (PHYSICAL) QUALLTY | |
| STANDARD SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE FOR PRESTRESSED CONCRETE (E1-1995) | |
| Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete | |
| STANDARD SPECIFICATION FOR STEEL STRAND, UNCOATED SEVEN-WIRE STRESS-RELIEVED FOR PRESTRESSED CONCRETE | |
| STANDARD SPECIFICATION FOR STEEL STRUCTURAL RIVETS (AASHTO NO.: M 228) (R 1988) | |
| STANDARD SPECIFICATION FOR STEEL WELDED WIRE FABRIC, DEFORMED, FOR CONCRETE REINFORCEMENT | |
| Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete | |
| STANDARD SPECIFICATION FOR STEEL WIRE, COLD-DRAWN FOR ZIG-ZAG SQUARE-FORMED AND SINUOUS-TYPE UPHOLSTERY SPRING UNITS (METRIC) | |
| STANDARD SPECIFICATION FOR STEEL WIRE, COLD-DRAWN, FOR ZIG-ZAG, SQUARE-FORMED, AND SINUOUS-TYPE UPHOLSTERY SPRING UNITS | |
| STANDARD SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR CONCRETE REINFORCEMENT | |
| STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP, ALLOY, HOT-ROLLED AND COLD-ROLLED, GENERAL REQUIREMENTS FOR - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP, ALLOY, HOT-ROLLED AND COLD-ROLLED, GENERAL REQUIREMENTS FOR | |
| Standard Specification for Steel, Sheet, Carbon, and High-Strength, Low-Alloy for Pressure Vessels - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL, SHEET, CARBON, AND HIGH-STRENGTH, LOW-ALLOY FOR PRESSURE VESSELS | |
| Standard Specification for Steel, Sheet, for Porcelain Enameling - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel, Sheet, for Porcelain Enameling | |
| STANDARD SPECIFICATION FOR STRAIGHT-BEAM ULTRASONIC EXAMINATION OF STEEL PLATES (R 1987) | |
| Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for STRAIGHT-BEAM ULTRASONIC EXAMINATION OF STEEL PLATES FOR PRESSURE VESSELS | |
| Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates | |
| STANDARD SPECIFICATION FOR STRESS-RELIEVED STEEL WIRE FOR PRESTRESSED CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Stress-Relieved Steel Wire for Prestressed Concrete | |
| STANDARD SPECIFICATION FOR STRUCTURAL BOLTS, ALLOY STEEL, HEAT TREATED, 150 KSI MINIMUM TENSILE STRENGTH | |
| Standard Specification for Ultrasonic Examination of Forged Crankshafts - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Ultrasonic Examination of Forged Crankshafts | |
| STANDARD SPECIFICATION FOR UNCOATED STRESS- RELIEVED STEEL WIRE FOR PRESTRESSED CONCRETE (R 1985) (AASHTO NO. M 204) | |
| Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete | |
| Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels | |
| STANDARD SPECIFICATION FOR VACUUM-TREATED ALLOY STEEL FORGINGS FORTURBINE ROTOR DISKS AND WHEELS | |
| Standard Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR VACUUM-TREATED CARBON AND ALLOY STEEL FORGINGS FOR TURBINE ROTORS AND SHAFTS | |
| STANDARD SPECIFICATION FOR VACUUM-TREATED STEEL FORGINGS FOR GENERATOR ROTORS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR VACUUM-TREATED STEEL FORGINGS FOR GENERATOR ROTORS | |
| STANDARD SPECIFICATION FOR WELDED DEFORMED STEEL WIRE FABRIC FOR CONCRETE REINFORCEMENT | |
| Standard Specification for Welded Large Diameter Austenitic Steel Pipe for Corrosive or High-Temperature Service - INCLUDES STANDARD+ REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR WELDED LARGE DIAMETER AUSTENITIC STEEL PIPE FOR CORROSIVE OR HIGH-TEMPERATURE SERVICE | |
| STANDARD SPECIFICATION FOR WELDLESS CARBON STEEL CHAIN | |
| STANDARD SPECIFICATION FOR WELDLESS CHAIN - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Weldless Chain | |
| Standard Specification for WROUGHT ALLOY STEEL ROLLS FOR COLD AND HOT REDUCTION | |
| STANDARD SPECIFICATION FOR WROUGHT CARBON STEEL WHEELS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR WROUGHT CARBON STEEL WHEELS | |
| STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) LOW-CARBON STEEL ARMOR WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) LOW-CARBON STEEL ARMOR WIRE | |
| Standard Specification for Zinc-Coated Flat Steel Armoring Tape - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ZINC-COATED FLAT STEEL ARMORING TAPE | |
| Standard Specification for Zinc-Coated Steel Wire Strand | |
| Standard Specifications for ELECTRIC-FUSION (ARC)-WELDED WROUGHT IRON PLATE PIPE | |
| STANDARD TEST METHOD FOR HEAT STABILITY OF STEAM TURBINE SHAFTS AND ROTOR FORGINGS (R 1991) | |
| Standard Test Method for Heat Stability of Steam Turbine Shafts and Rotor Forgings | |
| Standard Test Method for Transverse Testing of Gray Cast Iron | |
| Standard Test Method for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings | |
| Standard Test Method for Weight (Mass) of Coating on Aluminum-Coated Iron or Steel Articles | |
| STANDARD TEST METHOD FOR WEIGHT [MASS] OF COATING ON ALUMINUM-COATED IRON OR STEEL ARTICLES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles | |
| STANDARD TEST METHOD FOR WEIGHT OF COATING ON ALUMINUM-COATED IRON OR STEEL ARTICLES | |
| STEEL SHEET, COLD-ROLLED, ALUMINUM-COATED, TYPE 1 AND TYPE 2 | |
| STEEL SHEET,ZINC-CTD (GALV) BY HOT-DIP PROCES/CULV | |
| STEEL STRAND, UNCOATED SEVEN-WIRE FOR PRESTRESSED CONCRETE | |
| Suppl\xe9ment canadien \xe0 AAMA/WDMA/CSA 101/I.S.2/A440:22, NAFS-22 \x97 Norme nord-am\xe9ricaine sur les fen\xeatres/ Sp\xe9cification relative aux fen\xeatres, aux portes et aux lanterneaux | |
| Tentative Specification for HIGH-STRENGTH STUCTURAL STEEL | |
| Terms and Definitions for Use in CSA Masonry Standards | |
| Test Equipmemt and Materials for Hydraulic Cement, Supplementary Cementing Materials, and Cementitious Hydraulic Slag | |
| Test Method for Determination of Atmospheric Steam Expansion | |
| Test Method for Determination of Autoclave Expansion | |
| Test Method for Determination of Cement Fineness by Wet-Sieving | |
| Test Method for Determination of Density of Cement | |
| Test Method for Determination of Early Stiffening of Cement Paste | |
| Test Method for Determination of Heat of Hydration | |
| Test Method for Time of Set of Hydraulic Cement Paste - Gillmore Needles | |
| Test Method for Time of Set of Hydraulic Cement Paste - Vicat Needles | |
| Test Method for Verification of Sand | |
| Travaux de b\xe9ton pour maisons et petits b\xe2timents | |
| Window and Door Installation | |
| Window, door, and skylight installation | |
| Windows / Special Publication; User Selection Guide to CSA Standard A440-00 | |
| Windows |
| << Prev | Next >> |