Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
60
70
80
90
100
107
108
109
110
111
112
113
114
115
116
117
118
119
120
130
140
150
160
170
200
250
300
350
400
450
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| Addenda to A90.1-1992 Safety Standard for Belt Manlifts | |
| Airline Ground Support Vehicle-Mounted Vertical Lift Devices | |
| Alternative approval process for new and revised ITU-T Recommendations | |
| ASC A92 \x96 AERIAL WORK PLATFORMS - INTERPRETATIONS 1986 - 2013 | |
| Boom-Supported Elevated Working Platforms | |
| Design, Calculations, Safety Requirements and Test Methods for Mobile Elevating Work Platforms (MEWPs) | |
| Electronic Math Model and Drawing Data Creation Standard Data Organization - Unigraphics | |
| Guide for Verification and Validation in Computation Weld Mechanics | |
| Guide to the Evaluation and Management of Concrete Structures Affected by Alkali-Aggregate Reaction | |
| Manually Propelled Elevating Aerial Platforms | |
| Manually Propelled Mobile Ladder Stands and Scaffolds (Towers) | |
| Mast-Climbing Work Platforms | |
| METHODS FOR DETECTING COPPER CONTAINING PRESERVATIVES IN TREATED WOOD | |
| Metric Dimensioning System | |
| Quality Management and Quality Assurance - Vocabulary | |
| Safe Use of Mobile Elevating Work Platforms (MEWPs) | |
| Safety Code for MANLIFTS | |
| Safety Standard for Manlifts | |
| Self-Propelled Elevating Work Platforms | |
| Specification for Steel Sheet, Zinc-5% Aluminum-Mischmetal Alloy-Coated by Hot-Dip Process for Storm Sewer and Drainage Pipe | |
| STANDARD GUIDE FOR DEFINING AND RATING THE MICROSTRUCTURE OF HIGH CARBON BEARING STEELS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD GUIDE FOR DEFINING AND RATING THE MICROSTRUCTURE OF HIGH CARBON BEARING STEELS | |
| Standard Guide for Describing Arc Welds in Computerized Material Property and Nondestructive Examination Databases | |
| Standard Guide for Recording Arc Weld Material Property and Nondestructive Examination Data in Computerized Databases | |
| STANDARD GUIDE FOR SPECIFYING HARMONIZED STANDARD GRADE COMPOSITIONS FOR WROUGHT STAINLESS STEELS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels | |
| STANDARD METHOD FOR ANALYSIS OF TREATED WOOD AND TREATING SOLUTIONS BY X-RAY SPECTROSCOPY | |
| STANDARD METHOD FOR COLORIMETRIC ANALYSIS OF COPPER IN COPPER NAPHTHENATE TREATED WOOD OR COPPER NAPHTHENATE SOLUTIONS | |
| STANDARD METHOD FOR DETERMINATION OF COPPER IN COPPER NAPHTHENATE SOLUTION OR IN WOOD TREATED WITH COPPER NAPHTHENATE | |
| STANDARD METHOD FOR DETERMINATION OF IODINE AND CHLORINE IN WOOD USING NEUTRON ACTIVATION ANALYSIS | |
| STANDARD METHOD FOR DETERMINATION OF IPBC/PER IN SOLUTION AND WOOD USING HPLC AND SOLID-PHASE EXTRACTION | |
| STANDARD METHOD FOR DETERMINATION OF MOLD INHIBITORS MIT/CMIT AND OIT IN TREATING SOLUTION BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY | |
| STANDARD METHOD FOR DETERMINATION OF THE COPPER CONTENT OF COPPER SOAPS | |
| STANDARD METHOD FOR DETERMINING CONFORMANCE OF CO-SOLVENT USED WITH TYPE A HYDROCARBON SOLVENTS TO LEACHING RESISTANCE (PENTACHLOROPHENOL) | |
| STANDARD METHOD FOR DETERMINING PENETRATION USING A FLUORESCENT DYE OR PIGMENT PENETRATION SURROGATE | |
| STANDARD METHOD FOR THE DETERMINATION OF 3-IODO-2-PROPYNYL BUTYL CARBAMATE (IPBC) IN TREATING SOLUTIONS | |
| STANDARD METHOD FOR USING COLOR MACHINE VISION TO QUANTIFY THE EXTENT OF PENETRATION | |
| STANDARD METHOD OF TEST FOR EMULSIFIABILITY OF TYPE A HYDROCARBON SOLVENTS AND/OR AUXILIARY SOLVENTS USED WITH TYPE A HYDROCARBON SOLVENTS | |
| STANDARD METHOD TO DETERMINE THE CONFORMANCE OF AUXILIARY SOLVENT (CO-SOLVENT) USED WITH TYPE C HYDROCARBON SOLVENT TO WATER SOLUBILITY REQUIREMENT | |
| STANDARD PRACTICE FOR APPLICATION OF ASPHALT COATINGS TO CORRUGATED STEEL SEWER AND DRAINAGE PIPE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe | |
| STANDARD PRACTICE FOR APPLICATION OF BITUMINOUS (ASPHALT) COATINGS TO CORRUGATED STEEL SEWER AND DRAINAGE PIPE (R 1990) | |
| Standard Practice for Conducting Case Studies on Galvanized Structures - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Conducting Case Studies on Galvanized Structures | |
| STANDARD PRACTICE FOR CRITERIA FOR USE IN EVALUATION OF TESTING LABORATORIES AND ORGANIZATIONS FOR EXAMINATION AND INSPECTION OF STEEL, STAINLESS STEEL, AND RELATED ALLOYS | |
| Standard Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers | |
| STANDARD PRACTICE FOR LIFE-CYCLE COST ANALYSIS OF CORRUGATED METAL PIPE USED FOR CULVERTS, STORM SEWERS, AND OTHER BURIED CONDUITS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits | |
| Standard Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings | |
| Standard Specification for 50 Nickel-50 Iron Powder Metallurgy (P/M) Soft Magnetic Alloys | |
| STANDARD SPECIFICATION FOR 50 NICKEL-50 IRON POWDER METALLURGY SOFT MAGNETIC PARTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for 50 Nickel-50 Iron Powder Metallurgy Soft Magnetic Parts | |
| Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components | |
| STANDARD SPECIFICATION FOR ALLOY STEEL CHAIN SLINGS FOR OVERHEAD LIFTING | |
| Standard Specification for Aluminum Scrap for Use in Deoxidation and Alloying of Steel | |
| Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Amorphous Magnetic Core Alloys, Semi-Processed Types | |
| Standard Specification for Austempered Ductile Iron Castings (Metric) | |
| STANDARD SPECIFICATION FOR AUSTEMPERED DUCTILE IRON CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Austempered Ductile Iron Castings | |
| Standard Specification for Austenitic Chromium-Nickel-Sili con Alloy Steel Seamless and Welded Pipe | |
| Standard Specification for Austenitic Chromium-Nickel-Sili con Alloy Steel Seamless and Welded Tubing | |
| STANDARD SPECIFICATION FOR BORATED STAINLESS STEEL PLATE, SHEET, AND STRIP FOR NUCLEAR APPLICATION - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR BORATED STAINLESS STEEL PLATE, SHEET, AND STRIP FOR NUCLEAR APPLICATION | |
| STANDARD SPECIFICATION FOR CASTINGS, IRON- CHROMIUM-NICKEL- MOLYBDENUM CORROSION- RESISTANT, DUPLEX (AUSTENITIC/FERRITIC ) FOR GENERAL APPLICATION | |
| Standard Specification for Castings, Iron-Chromium-Nickel -Molybdenum Corrosion- Resistant, Duplex (Austenitic/Ferritic ) for General Application | |
| STANDARD SPECIFICATION FOR CASTINGS, IRON-CHROMIUM-NICKEL -MOLYBDENUM CORROSION-RESISTANT, DUPLEX (AUSTENITIC/FERRITIC ) FOR GENERAL APPLICATION - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Castings, Iron-Chromium-Nickel -Molybdenum Corrosion-Resistant, Duplex (Austenitic/Ferritic ) for General Application | |
| STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST FERRITIC/AUSTENITIC STAINLESS STEEL PIPE FOR CORROSIVE ENVIRONMENTS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST FERRITIC/AUSTENITIC STAINLESS STEEL PIPE FOR CORROSIVE ENVIRONMENTS | |
| Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion- Resistant Roll Shells | |
| STANDARD SPECIFICATION FOR CENTRIFUGALLY CAST WHITE IRON/GRAY IRON DUAL METAL ABRASION-RESISTANT ROLL SHELLS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Centrifugally Cast White Iron/Gray Iron Dual Metal Abrasion-Resistant Roll Shells | |
| Standard Specification for Chromium, Chromium-Nickel and Silicon Alloy Steel Plate, Sheet, and Strip for Corrosion and Heat Resisting Service | |
| STANDARD SPECIFICATION FOR COLD-FORMED WELDED AND SEAMLESS HIGH STRENGTH, LOW ALLOY STRUCTURAL TUBING WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE | |
| STANDARD SPECIFICATION FOR COLD-FORMED WELDED AND SEAMLESS HIGH-STRENGTH, LOW-ALLOY STRUCTURAL TUBING WITH IMPROVED ATMOSPHERIC CORROSION RESISTANCE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance | |
| Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Common Requirements for Bolting Intended for Use at Any Temperature from Cryogenic to the Creep Range | |
| Standard Specification for Common Requirements for Iron Castings for General Industrial Use - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR COMMON REQUIREMENTS FOR IRON CASTINGS FOR GENERAL INDUSTRIAL USE | |
| Standard Specification for Common Requirements for Steel Fasteners or Fastener Materials, or Both, Intended for Use at Any Temperature from Cryogenic to the Creep Range | |
| Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Common Requirements for Steel Flanges, Forged Fittings, Valves, and Parts for Piping Applications | |
| Standard Specification for Common Requirements for Wrought Steel Piping Fittings - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Common Requirements for Wrought Steel Piping Fittings | |
| STANDARD SPECIFICATION FOR COMPACTED GRAPHITE IRON CASTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Compacted Graphite Iron Castings | |
| STANDARD SPECIFICATION FOR CORRUGATED STEEL PIPE WITH SMOOTH PVC LINER FOR SEWERS AND DRAINS | |
| Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement (Metric) | |
| STANDARD SPECIFICATION FOR DEFORMED AND PLAIN STAINLESS STEEL BARS FOR CONCRETE REINFORCEMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Deformed and Plain Stainless Steel Bars for Concrete Reinforcement | |
| Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement | |
| STANDARD SPECIFICATION FOR EPOXY-COATED PREFABRICATED STEEL REINFORCING BARS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR EPOXY-COATED PREFABRICATED STEEL REINFORCING BARS | |
| STANDARD SPECIFICATION FOR EPOXY-COATED SEVEN-WIRE PRESTRESSING STEEL STRAND | |
| STANDARD SPECIFICATION FOR EPOXY-COATED STEEL WIRE AND WELDED WIRE FABRIC FOR REINFORCEMENT (E1-1995) | |
| STANDARD SPECIFICATION FOR EPOXY-COATED STEEL WIRE AND WELDED WIRE FABRIC FOR REINFORCEMENT | |
| Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR EPOXY-COATED STEEL WIRE AND WELDED WIRE REINFORCEMENT | |
| Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service (Metric) | |
| Standard Specification for Ferritic Ductile Iron Castings Suitable for Low-Temperature Service | |
| Standard Specification for Ferritic/Austenitic (Duplex) Stainless Steel Pipe Electric Fusion Welded with Addition of Filler Metal - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR FERRITIC/AUSTENITIC (DUPLEX) STAINLESS STEEL PIPE ELECTRIC FUSION WELDED WITH ADDITION OF FILLER METAL | |
| STANDARD SPECIFICATION FOR FLAT-ROLLED, GRAIN ORIENTED, HIGH PERMEABILITY, SILICON-IRON ELECTRICAL STEEL, FULLY PROCESSED TYPES 27P066, 30P070, 35P076 | |
| STANDARD SPECIFICATION FOR FLAT-ROLLED, GRAIN-ORIENTED, SILICON- IRON, ELECTRICAL STEEL, FULLY PROCESSED TYPES (METRIC) | |
| STANDARD SPECIFICATION FOR FLAT-ROLLED, GRAIN-ORIENTED, SILICON-IRON, ELECTRICAL STEEL, FULLY PROCESSED TYPES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR FLAT-ROLLED, GRAIN-ORIENTED, SILICON-IRON, ELECTRICAL STEEL, FULLY PROCESSED TYPES | |
| Standard Specification for Forged Grade 80 Alloy Steel Lifting Components and Welded Attachment Links | |
| STANDARD SPECIFICATION FOR FORGED GRADE 80 AND GRADE 100 STEEL LIFTING COMPONENTS AND WELDED ATTACHMENT LINKS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links | |
| STANDARD SPECIFICATION FOR FORGINGS, TITANIUM STABILIZED CARBON STEEL, FOR GLASS-LINED PIPING AND PRESSURE VESSEL SERVICE | |
| Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloy Bar for Relay Applications | |
| Standard Specification for Free-Machining Ferritic Stainless Soft Magnetic Alloys for Relay Applications | |
| Standard Specification for Free-Machining Stainless Steel Plate, Sheet, and Strip | |
| STANDARD SPECIFICATION FOR FULLY PROCESSED COLD-ROLLED LAMINATION STEEL | |
| Standard Specification for Fully Processed Magnetic Lamination Steel (Metric) | |
| Standard Specification for Fully Processed Magnetic Lamination Steel | |
| Standard Specification for Fusion Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling | |
| Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR STEEL SHEET, METALLIC-COATED BY THE HOT-DIP PROCESS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR GENERAL REQUIREMENTS FOR STEEL SHEET, METALLIC-COATED BY THE HOT-DIP PROCESS | |
| STANDARD SPECIFICATION FOR GRADE 80 AND GRADE 100 ALLOY STEEL CHAIN SLINGS FOR OVERHEAD LIFTING - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting | |
| STANDARD SPECIFICATION FOR HEAT-TREATED CARBON STEEL FITTINGS FOR LOW- TEMPERATURE AND CORROSIVE SERVICE | |
| Standard Specification for Heat-Treated Carbon Steel Fittings for Low-Temperature and Corrosive Service - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HEAT-TREATED CARBON STEEL FITTINGS FOR LOW-TEMPERATURE AND CORROSIVE SERVICE | |
| STANDARD SPECIFICATION FOR HIGH-FREQUENCY INDUCTION WELDED, UNANNEALED, AUSTENITIC STEEL CONDENSER TUBES | |
| STANDARD SPECIFICATION FOR HIGH-SILICON IRON PIPE AND FITTINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HIGH-SILICON IRON PIPE AND FITTINGS | |
| STANDARD SPECIFICATION FOR HIGH-STRENGTH BUTT-WELDING FITTINGS OF WROUGHT HIGH-STRENGTH LOW-ALLOY STEEL | |
| STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW- ALLOY STEEL SHAPES OF STRUCTURAL QUALITY, PRODUCED BY THE QUENCHING AND SELF- TEMPERING PROCESS (QST) | |
| STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW- ALLOY STRUCTURAL STEEL PLATE WITH ATMOSPHERIC CORROSION RESISTANCE | |
| Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST) | |
| Standard Specification for High-Strength Low-Alloy Structual Steel Plate with Low Carbon and Restricted Sulfer for Improved Weldability, Formability and Toughness | |
| STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW-ALLOY STRUCTURAL STEEL PLATE WITH ATMOSPHERIC CORROSION RESISTANCE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance | |
| STANDARD SPECIFICATION FOR HIGH-STRENGTH LOW-ALLOY STRUCTURAL STEEL PLATE WITH LOW CARBON AND RESTRICTED SULFUR FOR IMPROVED WELDABILITY, FORMABILITY, AND TOUGHNESS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness | |
| Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR HUBLESS CAST IRON SOIL PIPE AND FITTINGS FOR SANITARY AND STORM DRAIN, WASTE, AND VENT PIPING APPLICATIONS | |
| STANDARD SPECIFICATION FOR INVESTMENT CASTINGS, STEEL AND ALLOY, COMMON REQUIREMENTS, FOR GENERAL INDUSTRIAL USE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Investment Castings, Steel and Alloy, Common Requirements, for General Industrial Use | |
| Standard Specification for Iron-Phosphorus Powder Metallurgy (P/M) Parts for Soft Magnetic Applications | |
| Standard Specification for Iron-Phosphorus Powder Metallurgy Parts for Soft Magnetic Applications - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Iron-Silicon Relay Steels - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR IRON-SILICON RELAY STEELS | |
| STANDARD SPECIFICATION FOR LOW-CARBON MAGNETIC IRON - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR LOW-CARBON MAGNETIC IRON | |
| STANDARD SPECIFICATION FOR LOW-RELAXATION STEEL BARS FOR PRESTRESSED CONCRETE RAILROAD TIES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Low-Relaxation Steel Bars for Prestressed Concrete Railroad Ties | |
| Standard Specification for Low-Relaxation, Indented, Seven-Wire Steel Strand for Prestressed Concrete - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Masonry Joint Reinforcement | |
| STANDARD SPECIFICATION FOR MEDIUM CARBON ANTI-FRICTION BEARING STEEL - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Medium Carbon Anti-Friction Bearing Steel | |
| STANDARD SPECIFICATION FOR MEDIUM CARBON STEELS FOR ANTI-FRICTION BEARINGS | |
| STANDARD SPECIFICATION FOR METALLIC-COATED STEEL SMOOTH HIGH-TENSILE FENCE AND TRELLIS WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire | |
| STANDARD SPECIFICATION FOR PHOSPHOROUS IRON FABRICATED BY POWDER METALLURGY TECHNIQUES | |
| STANDARD SPECIFICATION FOR POST COATED (BITUMINOUS) CORRUGATED STEEL SEWER AND DRAINAGE PIPE | |
| STANDARD SPECIFICATION FOR POST-APPLIED COATINGS, PAVINGS, AND LININGS FOR CORRUGATED STEEL SEWER AND DRAINAGE PIPE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe | |
| Standard Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR PRECIPITATION HARDENING IRON BASE SUPERALLOY FORGINGS FOR TURBINE ROTOR DISKS AND WHEELS | |
| Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium- Molybdenum-Vanadium | |
| Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum- Vanadium - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED LOW - ALLOY STRUCTURAL STEEL PLATE WITH 70 KSI (485 MPA) MINIMUM YIELD STRENGTH TO 4 IN. (100 MM) THICK | |
| STANDARD SPECIFICATION FOR QUENCHED AND TEMPERED LOW-ALLOY STRUCTURAL STEEL PLATE WITH 70 KSI (485 MPA) MINIMUM YIELD STRENGTH TO 4 IN. (100 MM) THICK | |
| Standard Specification for Silicon Metal - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Silicon Metal | |
| Standard Specification for Sizes of Ferroalloys and Alloy Additives - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Sizes of Ferroalloys and Alloy Additives | |
| STANDARD SPECIFICATION FOR SPRAY-FORMED SEAMLESS AUSTENITIC STAINLESS STEEL PIPES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Spray-Formed Seamless Austenitic Stainless Steel Pipes | |
| STANDARD SPECIFICATION FOR SPRAY-FORMED SEAMLESS FERRITIC/AUSTENITIC STAINLESS STEEL PIPE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Spray-Formed Seamless Ferritic/Austenitic Stainless Steel Pipe | |
| Standard Specification for Stainless Steel Needle Tubing - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STAINLESS STEEL NEEDLE TUBING | |
| Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements | |
| Standard Specification for Steel Bars, Carbon-Manganese, Merchant Quality with 50 ksi (345 MPa) Yield Point | |
| Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging | |
| Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties | |
| Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Castings, Carbon and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades | |
| Standard Specification for Steel Castings, Carbon, and Alloy, Chemical Requirements Similar to Standard Wrought Grades - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL CASTINGS, CARBON, AND ALLOY, CHEMICAL REQUIREMENTS SIMILAR TO STANDARD WROUGHT GRADES | |
| Standard Specification for Steel Castings, Carbon, and Alloy, with Tensile Requirements, Chemical Requirements Similar to Standard Wrought Grades | |
| STANDARD SPECIFICATION FOR STEEL CASTINGS, SURFACE ACCEPTANCE STANDARDS, MAGNETIC PARTICLE AND LIQUID PENETRANT INSPECTION | |
| STANDARD SPECIFICATION FOR STEEL FORGINGS, ALLOY, FOR CARBURIZING APPLICATIONS (R 1990) | |
| STANDARD SPECIFICATION FOR STEEL FORGINGS, ALLOY, FOR CARBURIZING APPLICATIONS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Forgings, Alloy, for Carburizing Applications | |
| STANDARD SPECIFICATION FOR STEEL FORGINGS, MICROALLOY, FOR GENERAL INDUSTRIAL USE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL FORGINGS, MICROALLOY, FOR GENERAL INDUSTRIAL USE | |
| STANDARD SPECIFICATION FOR STEEL PLATES FOR PRESSURE VESSELS, PRODUCED BY THE THERMO- MECHANICAL CONTROL PROCESS (TMCP) | |
| Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP) | |
| STANDARD SPECIFICATION FOR STEEL PLATES, 9 % NICKEL ALLOY, FOR PRESSURE VESSELS, PRODUCED BY THE DIRECT-QUENCHING PROCESS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process | |
| STANDARD SPECIFICATION FOR STEEL PLATES, 9% NICKEL ALLOY, FOR PRESSURE VESSELS, PRODUCED BY THE DIRECT- QUENCHING PROCESS | |
| Standard Specification for Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels | |
| STANDARD SPECIFICATION FOR STEEL SHEET PILING, COLD FORMED, LIGHT GAGE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL SHEET PILING, COLD FORMED, LIGHT GAGE | |
| Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements) | |
| Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC AND ARAMID FIBER COMPOSITE COATED FOR CORRUGATED STEEL SEWER, CULVERT, AND UNDERDRAIN PIPE | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC COATED BY THE ELECTROLYTIC PROCESS FOR APPLICATIONS REQUIRING DESIGNATION OF THE COATING MASS ON EACH SURFACE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC COATED BY THE ELECTROLYTIC PROCESS FOR APPLICATIONS REQUIRING DESIGNATION OF THE COATING MASS ON EACH SURFACE | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC- NICKEL ALLOY COATED BY THE ELECTROLYTIC PROCESS FOR APPLICATIONS REQUIRING DESIGNATION OF THE COATING MASS ON EACH SURFACE | |
| Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process | |
| STANDARD SPECIFICATION FOR STEEL SHEET, ZINC-5 % ALUMINUM- MISCHMETAL ALLOY- COATED BY THE HOT-DIP PROCESS | |
| Standard Specification for Steel Sheet, Zinc-5% Aluminum Alloy-Coated by the Hot-Dip Process | |
| Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface - INCLUDES STANDARD + REDLINE | |
| Standard Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface | |
| STANDARD SPECIFICATION FOR STEEL STRAND, INDENTED, SEVEN-WIRE STRESS-RELIEVED FOR PRESTRESSED CONCRETE | |
| STANDARD SPECIFICATION FOR STEEL WIRE FOR MASONRY JOINT REINFORCEMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Wire for Masonry Joint Reinforcement | |
| STANDARD SPECIFICATION FOR STEEL WIRE, CARBON, FOR GENERAL USE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL WIRE, CARBON, FOR GENERAL USE | |
| Standard Specification for STEEL WIRE, CHROMIUM-SILICON ALLOY VALVE SPRING QUALITY | |
| Standard Specification for Steel Wire, Chromium-Silicon Alloys, Chrome-Silicon- Vanadium Alloy Valve Spring Quality | |
| STANDARD SPECIFICATION FOR STEEL WIRE, CHROMIUM-SILICON ALLOYS, CHROME-SILICON-VANAD IUM ALLOY VALVE SPRING QUALITY - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL WIRE, DEFORMED, FOR PRESTRESSED CONCRETE RAILROAD TIES | |
| Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties | |
| STANDARD SPECIFICATION FOR STEEL WIRE, EPOXY- COATED | |
| STANDARD SPECIFICATION FOR STEEL WIRE, EPOXY-COATED - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Wire, Epoxy-Coated | |
| STANDARD SPECIFICATION FOR STEEL WIRE, INDENDED, LOW-RELAXATION FOR PRESTRESSED CONCRETE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete Railroad Ties | |
| Standard Specification for Steel Wire, Indented, Low-Relaxation for Prestressed Concrete | |
| Standard Specification for Steel Wire, Modified Chromium Vanadium Valve Spring Quality - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL WIRE, MODIFIED CHROMIUM VANADIUM VALVE SPRING QUALITY | |
| STANDARD SPECIFICATION FOR STEEL WIRE, PRESSURE VESSEL WINDING - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STEEL WIRE, PRESSURE VESSEL WINDING | |
| STANDARD SPECIFICATION FOR STEEL, SHEET AND STRIP, HEAVY THICKNESS COILS, CARBON, HOT- ROLLED, STRUCTURAL QUALITY | |
| Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Columbium or Vanadium, or Both, Hot-Rolled | |
| Standard Specification for Steel, Sheet and Strip, Heavy Thickness Coils, High Strength, Low-Alloy, Hot-Rolled, with Improved Formability | |
| STANDARD SPECIFICATION FOR STRAIGHT BEAM ULTRASONIC EXAMINATION OF ROLLED STEEL STRUCTURAL SHAPES - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR STRAIGHT BEAM ULTRASONIC EXAMINATION OF ROLLED STEEL STRUCTURAL SHAPES | |
| Standard Specification for Textured Stainless Steel Sheet (Metric) | |
| STANDARD SPECIFICATION FOR TEXTURED STAINLESS STEEL SHEET [METRIC]- INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Textured Stainless Steel Sheet [Metric] | |
| STANDARD SPECIFICATION FOR THREADED COUPLINGS, STEEL, BLACK OR ZINC- COATED (GALVANIZED) WELDED OR SEAMLESS, FOR USE IN STEEL PIPE JOINTS | |
| Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints | |
| Standard Specification for Titanium Scrap for Use in Deoxidation and Alloying of Steel | |
| STANDARD SPECIFICATION FOR TITANIUM-STABILIZED CARBON STEEL FORGINGS FOR GLASS-LINED PIPING AND PRESSURE VESSEL SERVICE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Titanium-Stabilized Carbon Steel Forgings for Glass-Lined Piping and Pressure Vessel Service | |
| Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties | |
| Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete | |
| STANDARD SPECIFICATION FOR UNCOATED, WELDLESS, 2- AND 3-WIRE STRAND FOR PRESTRESSED CONCRETE | |
| Standard Specification for Uncoated, Weldless, 2-Wire and 3-Wire Steel Strand for Prestressed Concrete | |
| Standard Specification for Uncoated, Weldless, 3-Wire Steel Strand for Prestressed Concrete - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors | |
| Standard Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement | |
| STANDARD SPECIFICATION FOR VINYL-COATED STEEL WIRE AND WELDED WIRE REINFORCEMENT - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement | |
| Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Wrought High-Strength Ferritic Steel Butt-Welding Fittings | |
| STANDARD SPECIFICATION FOR ZINC-5 % ALUMINUM-MISCHMETAL ALLOY-COATED CARBON STEEL WIRE - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD SPECIFICATION FOR ZINC-5 % ALUMINUM-MISCHMETAL ALLOY-COATED CARBON STEEL WIRE | |
| STANDARD SPECIFICATION FOR ZINC-5 % ALUMINUM-MISCHMETAL ALLOY-COATED STEEL OVERHEAD GROUND WIRE STRAND - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand | |
| STANDARD SPECIFICATION FOR ZINC-5 % ALUMINUM-MISCHMETAL ALLOY-COATED STEEL WIRE STRAND - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Wire Strand | |
| STANDARD SPECIFICATION FOR ZINC-5% ALUMINUM- MISCHMETAL ALLOY-COATED STEEL WIRE STRAND | |
| STANDARD SPECIFICATION FOR ZINC-COATED (GALVANIZED) STEEL SMOOTH HIGH-TENSILE FENCE AND TRELLIS WIRE (E1_1988) | |
| STANDARD SPECIFICATION FOR: STEEL FORGINGS, LOW-CARBON AGE- HARDENING NICKEL- COPPER-CHROMIUM- MOLYBDENUM-COLUMBIUM ALLOY STEEL, FOR PRESSURE VESSEL COMPONENTS | |
| STANDARD SPECIFICATION FOR: STEEL FORGINGS, LOW-CARBON AGE-HARDENING NICKEL-COPPER-CHROMI UM- MOLYBDENUM-COLUMBIUM ALLOY STEEL, FOR PRESSURE VESSEL COMPONENTS (R 1993) | |
| Standard Terminology Relating to Heat Treatment of Metals | |
| Standard Terminology Relating to Metallic Coated Steel Products - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TERMINOLOGY RELATING TO METALLIC COATED STEEL PRODUCTS | |
| Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys | |
| Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter- Voltmeter Method with Sheet Specimens | |
| STANDARD TEST METHOD FOR ALTERNATING-CURRENT MAGNETIC PROPERTIES OF AMORPHOUS MATERIALS AT POWER FREQUENCIES USING WATTMETER-AMMETER- VOLTMETER METHOD WITH TOROIDAL SPECIMENS | |
| Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Vo ltmeter Method with Sheet Specimens - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Vo ltmeter Method with Sheet Specimens | |
| Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Vo ltmeter Method with Toroidal Specimens - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Alternating-Current Magnetic Properties of Amorphous Materials at Power Frequencies Using Wattmeter-Ammeter-Vo ltmeter Method with Toroidal Specimens | |
| STANDARD TEST METHOD FOR ALTERNATING-CURRENT MAGNETIC PROPERTIES OF MATERIALS AT LOW INDUCTIONS USING THE WATTMETER-VARMETER- AMMETER-VOLTMETER METHOD AND 25-CM EPSTEIN FRAME | |
| STANDARD TEST METHOD FOR ALTERNATING-CURRENT MAGNETIC PROPERTIES OF MATERIALS AT LOW MAGNETIC FLUX DENSITY USING THE VOLTMETER-AMMETER-WA TTMETER-VARMETER METHOD AND 25-CM EPSTEIN FRAME - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR ALTERNATING-CURRENT MAGNETIC PROPERTIES OF MATERIALS AT LOW MAGNETIC FLUX DENSITY USING THE VOLTMETER-AMMETER-WA TTMETER-VARMETER METHOD AND 25-CM EPSTEIN FRAME | |
| Standard Test Method for Alternating-Current Magnetic Properties of Materials at Low Magnetic Flux Density Using the Voltmeter-AmmeterWat tmeter-Varmeter Method and 25-cm Epstein Frame | |
| STANDARD TEST METHOD FOR ALTERNATING-CURRENT MAGNETIC PROPERTIES OF TOROIDAL CORE SPECIMENS USING THE VOLTMETER-AMMETER-WA TTMETER METHOD - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Alternating-Current Magnetic Properties of Toroidal Core Specimens Using the Voltmeter-Ammeter-Wa ttmeter Method | |
| Standard Test Method for an American National Standard Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces | |
| STANDARD TEST METHOD FOR COMPARING BOND STRENGTH OF STEEL REINFORCING BARS TO CONCRETE USING BEAM-END SPECIMENS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens | |
| STANDARD TEST METHOD FOR COMPARING THE ABRASION RESISTANCE OF COATING MATERIALS FOR CORRUGATED METAL PIPE - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe | |
| STANDARD TEST METHOD FOR COMPLEX DIELECTRIC CONSTANT OF NONMETALLIC MAGNETIC MATERIALS AT MICROWAVE FREQUENCIES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Complex Dielectric Constant of Nonmetallic Magnetic Materials at Microwave Frequencies | |
| STANDARD TEST METHOD FOR DETERMINING INTERLAMINAR RESISTANCE OF INSULATING COATINGS USING TWO ADJACENT TEST SURFACES - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Determining Interlaminar Resistance of Insulating Coatings Using Two Adjacent Test Surfaces | |
| Standard Test Method for Equotip Hardness Testing of Steel Products | |
| Standard Test Method for Ferrimagnetic Resonance Linewidth and Gyromagnetic Ratio of Nonmetallic Magnetic Materials | |
| STANDARD TEST METHOD FOR INDENTATION HARDNESS OF METALLIC MATERIALS BY COMPARISON HARDNESS TESTERS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Indentation Hardness of Metallic Materials by Comparison Hardness Testers | |
| Standard Test Method for Lamination Factor of Amorphous Magnetic Strip - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Lamination Factor of Amorphous Magnetic Strip | |
| STANDARD TEST METHOD FOR LEEB HARDNESS TESTING OF STEEL PRODUCTS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Leeb Hardness Testing of Steel Products | |
| Standard Test Method for Saturation Magnetization or Induction of Nonmetallic Magnetic Materials | |
| STANDARD TEST METHOD FOR SATURATION MAGNETIZATION OR SATURATION INDUCTION OF NONMETALLIC MAGNETIC MATERIALS (R 1981) (REDESIGNATION OF ASTM F133-70) | |
| STANDARD TEST METHOD FOR TENSION TESTING OF WIRE ROPES AND STRAND - INCLUDES STANDARD + REDLINE (PDF) | |
| STANDARD TEST METHOD FOR TENSION TESTING OF WIRE ROPES AND STRAND | |
| Standard Test Method for Torsion Testing of Wire - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Torsion Testing of Wire | |
| Standard Test Method for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings | |
| STANDARD TEST METHOD FOR WEIGHT (MASS) OF COATING ON IRON AND STEEL ARTICLES WITH ZINC OR ZINC-ALLOY COATINGS | |
| STANDARD TEST METHOD FOR WEIGHT [MASS] OF COATING ON IRON AND STEEL ARTICLES WITH ZINC OR ZINC-ALLOY COATINGS - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings | |
| Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels - INCLUDES STANDARD + REDLINE (PDF) | |
| Standard Test Methods for Detecting Detrimental Intermetallic Phase in Duplex Austenitic/Ferritic Stainless Steels | |
| Standard Test Methods for Detecting Detrimental Intermetallic Phase in Wrought Duplex Austenitic/Ferritic Stainless Steels | |
| STEEL SHEET AND STRIP, CHROMIUM - MOLYBDENUM ALLOY | |
| STEEL WIRE CHROMIUM SILICON VALVE SPRING QUALITY | |
| TERMINOLOGY RELATING TO STEEL, STAINLESS STEEL, RELATED ALLOYS, AND FERROALLOYS | |
| Training Requirements for the Use, Operation, Inspection, Testing and Maintenance of Mobile Elevating Work Platforms (MEWPs) | |
| Transport Platforms | |
| Vehicle-Mounted Bridge Inspection and Maintenance Devices | |
| Vehicle-Mounted Elevating and Rotating Aerial Devices | |
| Ventilateurs pour les espaces inoccup\xe9s des b\xe2timents | |
| Working Procedures for the Special Study Group on "IMT-2000 and beyond" SERIES A: ORGANIZATION OF THE WORK OF ITU-T |
| << Prev | Next >> |