AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Adhesives - Installation of floor coverings, wood flooring, levelling compounds and tiles - Specification of trowel notch sizes (ISO 6076:2023, Corrected version 2023-09) | |
| Anaesthetic and respiratory equipment - Anaesthetic reservoir bags (ISO 5362:2024) | |
| Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2014) | |
| Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO 5367:2023) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2006) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors (ISO 5356-2:2012) | |
| Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors - Amendment 1 (ISO 5356-2:2012/Amd 1:2019) | |
| Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases (ISO 5359:2014) | |
| Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases - Amendment 1 (ISO 5359:2014/Amd 1:2017). | |
| Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2008) | |
| Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) | |
| Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2012) | |
| Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) | |
| Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2023, Corrected version 2023-11) | |
| Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000) | |
| Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016) | |
| Anaesthetic reservoir bags (ISO 5362:2006) | |
| Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2006) | |
| Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2012) | |
| Anaesthetic vaporizers - Agent-specific filling systems (ISO 5360:2016) | |
| Animal and vegetable fats and oils - Determination of melting point in open capillary tubes (slip point) (ISO 6321:2002) | |
| Animal and vegetable fats and oils - Determination of melting point in open capillary tubes - Slip point (ISO 6321:2021) | |
| Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2000/Cor.1:2006 ) | |
| Animal and vegetable fats and oils - Determination of refractive index (ISO 6320:2017) | |
| Animal and vegetable fats and oils - Determination of refractive index. (ISO 6320:2000) | |
| Animal and vegetable fats and oils - Preparation of methyl esters of fatty acids. (ISO 5509:2000) | |
| Animal and vegetable fats and oils - Sampling - Amendment 1: Flexitanks (ISO 5555:2001/Amd 1:2014) | |
| ANIMAL AND VEGETABLE FATS AND OILS. ANALYSIS BY GAS CHROMATOGRAPHY OF METHYL ESTERS OF FATTY ACIDS. (ISO 5508:1990). | |
| ANIMAL AND VEGETABLE FATS AND OILS. SAMPLING. (ISO 5555:1991). | |
| Animal and vegetable fats and oils. Sampling. (ISO 5555:2001) | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005) (Endorsed by AENOR in August of 2006.) | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005) | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 1: Kjeldahl method (ISO 5983-1:2005/Cor 1:2008) | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion and steam distillation method (ISO 5983-2:2009) | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion/steam distillation method (ISO 5983-2:2005) (Endorsed by AENOR in August of 2006.)... | |
| Animal feeding stuffs - Determination of nitrogen content and calculation of crude protein content - Part 2: Block digestion/steam distillation method (ISO 5983-2:2005) | |
| Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2005) (Endorsed by AENOR in May of 2006.) | |
| Bonded abrasive products - Permissible unbalances of grinding wheels as delivered - Static testing (ISO 6103:2014) (Endorsed by AENOR in December of 2014.) | |
| BONDED ABRASIVE PRODUCTS - PERMISSIBLE UNBALANCES OF GRINDING WHEELS AS DELIVERED - TESTING (ISO 6103:1999) (Endorsed by AENOR in June of 2000.) | |
| Camping tents (ISO 5912:2003) | |
| Camping tents (ISO 5912:2011) | |
| Camping tents - Requirements and test methods (ISO 5912:2020) | |
| Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) (Endorsed by AENOR in August of 2006.) | |
| Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2015) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO 5840-1:2021) (Endorsed by Asociación Española de Normalización in March of 2021.) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements - Amendment 1 (ISO 5840-1:2021/Amd 1:2025) (Endorsed by Asociación Española de Normalización in May of 2025.) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2015) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO 5840-2:2021) (Endorsed by Asociación Española de Normalización in March of 2021.) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes - Amendment 1 (ISO 5840-2:2021/Amd 1:2025) (Endorsed by Asociación Española de Normalización in May of 2025.)... | |
| Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2013) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO 5840-3:2021) (Endorsed by Asociación Española de Normalización in March of 2021.) | |
| Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques - Amendment 1 (ISO 5840-3:2021/Amd 1:2025) (Endorsed by Asociación Española de Normalización in May... | |
| CENTRIFUGAL, MIXED FLOW AND AXIAL PUMPS. CODE FOR HYDRAULIC PERFORMANCE TESTS. PRECISION CLASS (ISO 5198:1987) | |
| Cereals - Vocabulary (ISO 5527:2015) | |
| Cereals and pulses - Determination of the mass of 1000 grains (ISO 520:2010) | |
| Cereals, pulses and other food grains - Nomenclature (ISO 5526:2013) | |
| Cheese and processed cheese - Determination of total solids content (Reference method) (ISO 5534:2004) | |
| Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method (ISO 5943:2004) (Endorsed by AENOR in August of 2006.) | |
| Cheese and processed cheese products - Determination of chloride content - Potentiometric titration method (ISO 5943:2006) | |
| Chemical analysis of steel - Order of listing elements in steel standards (ISO 6306:2020) | |
| Clear liquids - Estimation of colour by the platinum-cobalt colour scale (ISO 6271:2015) | |
| Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 1: Visual method (ISO 6271-1:2004) | |
| Clear liquids - Estimation of colour by the platinum-cobalt scale - Part 2: Spectrophotometric method (ISO 6271-2:2004) | |
| Connections for fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 4: Dimensions, design, test methods and requirements for... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 1: Ports with truncated housing for O-ring... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 2: Dimensions, design, test methods and requirements... | |
| Connections for hydraulic fluid power and general use - Ports and stud ends with ISO 261 metric threads and O-ring sealing - Part 3: Dimensions, design, test methods and requirements... | |
| Construction drawings - Indication of limit deviations (ISO 6284:1996) | |
| Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2007) (Endorsed by AENOR in October of 2007.) | |
| Conveyor belts with a textile carcass - Total belt thickness and thickness of constitutive elements - Test methods (ISO 583:2023) (Endorsed by Asociación Española de Normalización in April of 2023.)... | |
| Conveyor belts with a textile carcass. Total thickness and thickness of elements. Part 1: Methods of test (ISO 583-1:1999). | |
| Dentistry - Designation system for tooth developmental stages (ISO 5365:2024) | |
| Dentistry - Mobile dental units and dental patient chairs - Part 1: General requirements (ISO 5467-1:2022) | |
| Dentistry - Mobile dental units and dental patient chairs - Part 2: Air, water, suction and wastewater systems (ISO 5467-2:2022) | |
| Dentistry - Number coding system for rotary instruments - Part 1: General characteristics (ISO 6360-1:2004) | |
| Dentistry - Number coding system for rotary instruments - Part 1: General characteristics (ISO 6360-1:2004/Cor 1:2007) | |
| Dentistry - Number coding system for rotary instruments - Part 2: Shapes (ISO 6360-2:2004) | |
| Dentistry - Number coding system for rotary instruments - Part 2: Shapes - Amendment 1 (ISO 6360-2:2004/Amd 1:2011) | |
| Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters (ISO 6360-3:2005) (Endorsed by AENOR in August of 2006.) | |
| Dentistry - Number coding system for rotary instruments - Part 3: Specific characteristics of burs and cutters (ISO 6360-3:2005) | |
| Dentistry - Number coding system for rotary instruments - Part 4: Specific characteristics of diamond instruments (ISO 6360-4:2004) | |
| Dentistry - Number coding system for rotary instruments - Part 5: Specific characteristics of root-canal instruments (ISO 6360-5:2007) | |
| Dentistry - Number coding system for rotary instruments - Part 6: Specific characteristics of abrasive instruments (ISO 6360-6:2004) | |
| Dentistry - Number coding system for rotary instruments - Part 7: Specific characteristics of mandrels and special instruments (ISO 6360-7:2006) | |
| Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2009) | |
| Destructive tests on welds in metallic materials - Bend tests (ISO 5173:2023) | |
| Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2001) | |
| Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO 5178:2019) | |
| Dried milk - Determination of moisture content (Reference method) (ISO 5537:2004) | |
| Dried milk and dried milk products - Determination of moisture content (Reference method) (ISO 5537:2023) | |
| Earth-moving machinery - Basic types - Identification and terms and definitions (ISO 6165:2006) | |
| Earth-moving machinery - Basic types - Identification and terms and definitions (ISO 6165:2012) | |
| Earth-moving machinery - Basic types - Identification and vocabulary (ISO 6165:2022) | |
| EARTH-MOVING MACHINERY - BASIC TYPES - VOCABULARY (ISO 6165:1997). | |
| Earth-moving machinery -- Basic types -- Vocabulary. (ISO 6165:2001) | |
| EARTH-MOVING MACHINERY, AND TRACTORS AND MACHINERY FOR AGRICULTURE AND FORESTRY. SEAT INDEX POINT (ISO 5353:1995) | |
| Energy performance of buildings - Building management system - Part 1: Module M10-12 (ISO 52127-1: 2021) | |
| Energy performance of buildings - Contribution of building automation, controls and building management - Part 1: General framework and procedures (ISO 52120-1:2021, Corrected version 2022-09) | |
| Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 1: Calculation procedures (ISO 52016-1:2017) (Endorsed by Asociación Española... | |
| Energy performance of buildings - Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads - Part 3: Calculation procedures regarding adaptive building envelope elements (ISO... | |
| Energy performance of buildings - External climatic conditions - Part 1: Conversion of climatic data for energy calculations (ISO 52010-1:2017) (Endorsed by Asociación Española de Normalización in December of 2017.)... | |
| Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017) (Endorsed by Asociación Española... | |
| Energy performance of buildings - Indicators, requirements, ratings and certificates - Part 1: General aspects and application to the overall energy performance (ISO 52003-1:2017) (Endorsed by Asociación Española de Normalización... | |
| Energy performance of buildings - Overarching EPB assessment - Part 1: General framework and procedures (ISO 52000-1:2017) | |
| Energy performance of buildings - Sensible and latent heat loads and internal temperatures - Part 1: Generic calculation procedures (ISO 52017-1:2017) (Endorsed by Asociación Española de Normalización in December of... | |
| Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection... | |
| Energy performance of buildings - Thermal, solar and daylight properties of building components and elements - Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection... | |
| Equipment for fire protection and fire fighting - Fire extinguishing media - Carbon dioxide (ISO 5923:2012) | |
| Ergonomic principles in the design of work systems (ISO 6385:2004) | |
| Ergonomics principles in the design of work systems (ISO 6385:2016) (Endorsed by AENOR in November of 2016.) | |
| Fans - Performance testing using standardized airways (ISO 5801:2017) | |
| Fans - Performance testing using standardized airways - Amendment 1 (ISO 5801:2017/Amd 1:2025) | |
| Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995) | |
| Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2007) | |
| Flexible cellular polymeric materials - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:2013) | |
| Freight containers - Coding, identification and marking (ISO 6346:1995) | |
| Freight containers - Coding, identification and marking (ISO 6346:2022, Corrected version 2022-08) | |
| Freight containers - Coding, identification and marking - Amendment 3 (ISO 6346:1995/Amd 3:2012) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 1: Terminology and common tests (ISO 5395-1:2013) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 1: Terminology and common tests - Amendment 1: Annex G (Vibration test code - Hand-arm vibration and whole-body vibration)... | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 2: Pedestrian-controlle d lawnmowers (ISO 5395-2:2013) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 2: Pedestrian-controlle d lawnmowers - Amendment 1: OPC, cutting means, pressurized hoses (ISO 5395-2:2013/Amd 1:2016) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 2: Pedestrian-controlle d lawnmowers - Amendment 2: Cutting-means-enclos ure guards (ISO 5395-2:2013/Amd 2:2017) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 3: Ride-on lawnmowers with seated operator (ISO 5395-3:2013) | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 1: OPC, Parking brake, ROPS, pressurized hoses, cutting means, grass catcher... | |
| Garden equipment - Safety requirements for combustion-engine-po wered lawnmowers - Part 3: Ride-on lawnmowers with seated operator - Amendment 2: Cutting means enclosure guards (ISO 5395-3:2013/Amd 2:2017) | |
| Gas analysis - Comparison methods for determining and checking the composition of calibration gas mixtures (ISO 6143:2001) | |
| Gas analysis - Contents of certificates for calibration gas mixtures (ISO 6141:2015) | |
| Gas analysis - Contents of certificates for calibration gas mixtures - Amendment 1: Cross reference list to ISO Guide 31:2015 and ISO/IEC 17025:2017 (ISO 6141:2015/Amd 1:2020) | |
| Gas analysis - Determination of the water dew point of natural gas - Cooled surface condensation hygrometers (ISO 6327:1981) | |
| Gas analysis - Preparation of calibration gas mixtures - Gravimetric method (ISO 6142:2001) | |
| Gas analysis - Preparation of calibration gas mixtures - Part 1: Gravimetric method for Class I mixtures (ISO 6142-1:2015) | |
| Gas analysis - Preparation of calibration gas mixtures - Static volumetric method (ISO 6144:2003) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 1: General aspects (ISO 6145-1:2019) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 6: Critical flow orifices (ISO 6145-6:2017) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2018) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 10: Permeation method (ISO 6145-10:2002) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 11: Electrochemical generation (ISO 6145-11:2005) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 1: Methods of calibration (ISO 6145-1:2003) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 4: Continuous syringe injection method (ISO 6145-4:2004) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 5: Capillary calibration devices (ISO 6145-5:2009) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 6: Critical orifices (ISO 6145-6:2003) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 7: Thermal mass-flow controllers (ISO 6145-7:2009) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 8: Diffusion method (ISO 6145-8:2005) | |
| Gas analysis - Preparation of calibration gas mixtures using dynamic volumetric methods - Part 9: Saturation method (ISO 6145-9:2009) | |
| Gas analysis - Requirements for certificates for calibration gases and gas mixtures (ISO 6141:2000) | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006) (Endorsed by AENOR in October of 2006.) | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006) | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests (ISO 5172:2006/Amd 2:2015) | |
| Gas welding equipment - Blowpipes for gas welding, heating and cutting - Specifications and tests - Amendment 1 (ISO 5172:2006/Amd 1:2012) | |
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2009) | |
| Gas welding equipment - Pressure gauges used in welding, cutting and allied processes (ISO 5171:2019) | |
| Gas welding equipment - Safety devices - Part 1: Devices incorporating a flame (flashback) arrestor (ISO 5175-1:2017) | |
| Gas welding equipment - Safety devices - Part 2: Devices not incorporating a flame (flashback) arrestor (ISO 5175-2:2017, Corrected version 2019-01) | |
| Geometrial Product Specifications (GPS). Surface texture: Profile method; Measurement standards. Part 2: Software measurement standards. (ISO 5436-2:2001) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2024) (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998) | |
| Geometrical product specifications (GPS) - Rotary axis form-measuring instruments - Design and metrological characteristics (ISO 5463:2024) (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures. (ISO 5436-1:2000) | |
| Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2001/Cor 1:2006/Cor 2:2008) | |
| Geometrical product specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 2: Software measurement standards (ISO 5436-2:2012) (Endorsed by AENOR in October of 2013.) | |
| Guidelines for the promotion and implementation of gender equality and women’s empowerment (ISO 53800:2024) | |
| Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992) | |
| Hypodermic needles for single use - Colour coding for identification (ISO 6009:1992/Cor 1:2008) | |
| Hypodermic needles for single use - Colour coding for identification (ISO 6009:2016) | |
| Ice makers for commercial use - Classification, requirements and test conditions (ISO 6369:2023) | |
| Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:2016) | |
| Implants for surgery - Metallic materials - Part 1: Wrought stainless steel (ISO 5832-1:2024) | |
| Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:1999) | |
| Implants for surgery - Metallic materials - Part 2: Unalloyed titanium (ISO 5832-2:2018) | |
| Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:1996) | |
| Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2016) | |
| Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO 5832-3:2021) | |
| Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromi um-molybdenum alloy (ISO 5832-6:1997) | |
| Implants for surgery - Metallic materials - Part 6: Wrought cobalt-nickel-chromi um-molybdenum alloy (ISO 5832-6:2022) | |
| Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nick el-molybdenum-iron alloy (ISO 5832-7:2016) | |
| Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nick el-molybdenum-iron alloy (ISO 5832-7:2024) | |
| Industrial fans - Performance testing in situ (ISO 5802:2001) | |
| Industrial fans - Performance testing in situ (ISO 5802:2001/Amd 1:2015) | |
| Industrial fans - Performance testing using standardized airways (ISO 5801:2007 including Cor 1:2008) | |
| Industrial valves - Mounting kits for part-turn valve actuator attachment (ISO 5640:2024) | |
| Industrial valves - Multi-turn valve actuator attachments (ISO 5210:1991) | |
| Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2017) | |
| Industrial valves - Multi-turn valve actuator attachments (ISO 5210:2023) | |
| Industrial valves - Part-turn actuator attachments (ISO 5211:2001) | |
| Industrial valves - Part-turn actuator attachments (ISO 5211:2017) | |
| Industrial valves - Part-turn actuator attachments (ISO 5211:2023) | |
| Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW (ISO 6185-1:2001) | |
| Inflatable boats - Part 1: Boats with a maximum motor power rating of 4,5 kW. (ISO 6185-1:2001) | |
| Inflatable boats - Part 2: Boats with a maximum motor power rating of 4,5 kW to 15 kW inclusive (ISO 6185-2:2001) | |
| Inflatable boats - Part 3: Boats with a hull length less than 8 m with a motor rating of 15 kW and greater (ISO 6185-3:2014) | |
| Inflatable boats - Part 3: Boats with a length of the hull less than 8 m with a motor power rating of 15 kW and greater (ISO 6185-3:2024) (Endorsed by... | |
| Inflatable boats - Part 3: Boats with maximum motor power rating of 15kW and greater. (ISO 6185-3:2001) | |
| Inflatable boats - Part 4: Boats with a hull length of between 8 m and 24 m with a motor power rating of 15 kW and greater (ISO 6185-4:2011, Corrected... | |
| Inland navigation vessels - Manually operated coupling devices for push tows - Safety requirements and main dimensions (ISO 6218:2005) | |
| Inland navigation vessels - Manually- and power-operated coupling devices for pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2015) | |
| Inland navigation vessels - Manually- and power-operated coupling devices for rope connections of pushing units and coupled vessels - Safety requirements and main dimensions (ISO 6218:2019) | |
| Innovation management - Fundamentals and vocabulary (ISO 56000:2020) | |
| Innovation management - Fundamentals and vocabulary (ISO 56000:2025) | |
| Innovation management - Innovation management system - Guidance (ISO 56002:2019) | |
| Innovation management - Tools and methods for innovation partnership - Guidance (ISO 56003:2019) | |
| Innovation management - Tools and methods for intellectual property management - Guidance (ISO 56005:2020) | |
| Innovation management - Tools and methods for managing opportunities and ideas - Guidance (ISO 56007:2023) | |
| Innovation management system - Requirements (ISO 56001:2024) | |
| Investigation of brazeability with spreading and gap-filling test (ISO 5179:2021) | |
| Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO 5398-1:2007) | |
| Leather - Chemical determination of chromic oxide content - Part 1: Quantification by titration (ISO 5398-1:2018) | |
| Leather - Chemical determination of chromic oxide content - Part 2: Quantification by colorimetric determination (ISO 5398-2:2009) | |
| Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO 5398-3:2007) | |
| Leather - Chemical determination of chromic oxide content - Part 3: Quantification by atomic absorption spectrometry (ISO 5398-3:2018) | |
| Leather - Chemical determination of chromic oxide content - Part 4: Quantification by inductively coupled plasma (ICP) (ISO 5398-4:2018) | |
| Leather - Chemical determination of chromic oxide content - Part 4: Quantification by inductively coupled plasma - optical emission spectrometer (ICP-OES) (ISO 5398-4:2007) | |
| Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2011) | |
| Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2017) | |
| Leather - Determination of flex resistance - Part 1: Flexometer method (ISO 5402-1:2022) | |
| Leather - Determination of flex resistance - Part 2: Vamp flex method (ISO 5402-2:2015) | |
| Leather - Determination of water resistance of flexible leather - Part 1: Repeated linear compression (penetrometer) (ISO 5403-1:2011) | |
| Leather - Determination of water resistance of flexible leather - Part 2: Repeated angular compression (Maeser) (ISO 5403-2:2011) | |
| Leather - Physical and mechanical tests - Determination of flex resistance by flexometer method. (ISO 5402:2002) | |
| Leather - Physical and mechanical tests - Determination of the water resistance of heavy leathers. (ISO 5404:2002) | |
| Leather - Physical and mechanical tests - Determination of water resistance of flexible leather. (ISO 5403:2002) | |
| Leather - Physical test methods - Determination of water resistance of heavy leathers (ISO 5404:2011) | |
| LEATHER. DETERMINATION OF WATER-SOLUBLE MAGNESIUM SALTS. EDTA TITRIMETRIC METHOD. (ISO 5399:1984). | |
| LIQUEFIED PETROLEUM GASES. CORROSIVENESS TO COPPER. COPPER STRIP TEST. (ISO 6251:1982). | |
| LIQUEFIED PETROLEUM GASES. CORROSIVENESS TO COPPER. COPPER STRIP TEST. (ISO 6251:1996). | |
| Low-pressure hose assemblies for use with medical gases (ISO 5359:2008) | |
| Low-pressure hose assemblies for use with medical gases - Amendment 1 (ISO 5359:2008/Amd 1:2011) | |
| MANUAL BLOWPIPES FOR WELDING, CUTTING AND HEATING. SPECIFICATIONS AND TESTS. (ISO 5172:1995, INCLUDING AMENDMENT 1:1995). | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 1: General principles and requirements (ISO 5167-1:2022) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 2: Orifice plates (ISO 5167-2:2022) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2020) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 3: Nozzles and Venturi nozzles (ISO 5167-3:2022) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2003) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 4: Venturi tubes (ISO 5167-4:2022) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2016) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 5: Cone meters (ISO 5167-5:2022) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2019) | |
| Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full - Part 6: Wedge meters (ISO 5167-6:2022) | |
| MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES. PART 1: ORIFICE PLATES NOZZLES AND VENTURI TUBES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL. (ISO 5167-1:1991). | |
| MEASUREMENT OF FLUID FLOW BY MEANS OF PRESSURE DIFFERENTIAL DEVICES. PART 1: ORIFICE PLATES, NOZZLES AND VENTURI TUBES INSERTED IN CIRCULAR CROSS-SECTION CONDUITS RUNNING FULL. (ISO 5167-1:1995/AM1:1998 ). | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand- transmitted vibration- Part 1: General requirements. (ISO 5349-1:2001) | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace (ISO 5349-2:2001/Amd 1:2015) | |
| Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace. (ISO 5349-2:2001) | |
| Medical laboratories - Concepts and specifications for the design, development, implementation, and use of laboratory-developed tests (ISO 5649:2024) | |
| Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2011) | |
| Metallic and other inorganic coatings - Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2018) | |
| Metallic coatings- Electrodeposited coatings of chromium for engineering purposes (ISO 6158:2004) | |
| Milk - Determination of freezing point - Thermistor cryoscope method (Reference method) (ISO 5764:2009) | |
| Milk - Determination of freezing point - Thermistor cryoscope method (Reference method). (ISO 5764:2002) | |
| Milk fat products - Determination of water content - Karl Fischer method (ISO 5536:2009) | |
| Natural gas - Determination of sulfur compounds - Part 1: General introduction (ISO 6326-1:2007) | |
| Natural gas - Determination of sulfur compounds - Part 3: Determination of hydrogen sulfide, mercaptan sulfur and carbonyl sulfide sulfur by potentiometry (ISO 6326-3:1989) | |
| Natural gas - Determination of sulfur compounds - Part 5: Lingener combustion method (ISO 6326-5:1989) | |
| Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (ISO 5580:2023) | |
| Non-destructive testing - Radiographic testing of metallic materials using film and X- or gamma rays - Basic rules (ISO 5579:2013) | |
| Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017) | |
| Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method) (ISO 5511:1992) | |
| Oilseeds - Determination of oil content - Method using continuous-wave low-resolution nuclear magnetic resonance spectrometry (Rapid method) | |
| Oilseeds - Sampling (ISO 542:1990) | |
| Paints and varnishes - Determination of resistance to humidity - Part 1: Condensation (single-sided exposure) (ISO 6270-1:2017) | |
| Paints and varnishes - Determination of resistance to humidity - Part 1: Continuous condensation (ISO 6270-1:1998) | |
| Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2017) | |
| Paints and varnishes - Determination of resistance to humidity - Part 2: Condensation (in-cabinet exposure with heated water reservoir) (ISO 6270-2:2025) | |
| Paints and varnishes - Determination of resistance to humidity - Part 2: Procedure for exposing test specimens in condensation-water atmospheres (ISO 6270-2:2005) | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2002) | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 1: Falling-weight test, large-area indenter (ISO 6272-1:2011) | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2002) | |
| Paints and varnishes - Rapid-deformation (impact resistance) tests - Part 2: Falling-weight test, small-area indenter (ISO 6272-2:2011) | |
| PAINTS AND VARNISHES. DETERMINATION OF RESISTANCE TO HUMIDITY (CONTINUOUS CONDENSATION). (ISO 6270:1980). | |
| PAINTS AND VARNISHES. FALLING-WEIGHT TEST. (ISO 6272:1993). | |
| Paper and board - Determination of grammage (ISO 536:2012) | |
| Paper and board - Determination of grammage (ISO 536:2019) | |
| Paper and board - Determination of thickness, density and specific volume (ISO 534:2005) | |
| Paper and board - Determination of thickness, density and specific volume (ISO 534:2011) | |
| Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2014) | |
| Paper and board - Determination of water absorptiveness - Cobb method (ISO 535:2023) | |
| PAPER AND BOARD. DETERMINATION OF GRAMMAGE. (ISO 536:1995). | |
| Paper, board and pulps - Determination of dry matter content - Oven-drying method (ISO 638:2008) | |
| Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 1: Materials in solid form (ISO 638-1:2021) | |
| Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 1: Materials in solid form (ISO 638-1:2022) | |
| Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2021) | |
| Paper, board, pulps and cellulosic nanomaterials - Determination of dry matter content by oven-drying method - Part 2: Suspensions of cellulosic nanomaterials (ISO 638-2:2022) | |
| Petroleum products - Determination of the ignition quality of diesel fuels - Cetane engine method (ISO 5165:2020) | |
| Petroleum products - Gum content of fuels - Jet evaporation method (ISO 6246:2017, Corrected version 2024-09) | |
| Petroleum products - Gum content of fuels - Jet evaporation method - Amendment 1: Purity requirement for n-heptane (ISO 6246:2017/Amd 1:2019) | |
| Petroleum products - Gum content of light and middle distillate fuels - Jet evaporation method (ISO 6246:1995) | |
| Petroleum products. Determination of ash (ISO 6245:2001) | |
| PETROLEUM PRODUCTS. DETERMINATION OF ASH. (ISO 6245:1993). | |
| Petroleum, petrochemical and natural gas industries - Dry gas sealing systems for axial, centrifugal, and rotary screw compressors and expanders (ISO 6368:2021) (Endorsed by Asociación Española de Normalización in January... | |
| PLASTICS - DETERMINATION OF APPARENT DENSITY OF MATERIAL THAT CAN BE POURED FROM A SPECIFIED FUNNEL (ISO 60:1977) | |
| Plastics - Determination of apparent density of material that can be poured from a specified funnel (ISO 60:2023) | |
| PLASTICS - DETERMINATION OF APPARENT DENSITY OF MOULDING MATERIAL THAT CANNOT BE POURED FROM A SPECIFIED FUNNEL (ISO 61:1976) | |
| Plastics - Determination of apparent density of moulding material that cannot be poured from a specified funnel (ISO 61:2023) | |
| Plastics - Determination of compressive properties (ISO 604:2002) | |
| Plastics - Determination of pourability (ISO 6186:2023) | |
| Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) | |
| Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2019) | |
| Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) | |
| Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2025) | |
| Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995) | |
| Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:1995/Cor.1:200 1) | |
| Plastics - Determination of tensile properties - Part 3: Test conditions for films and sheets (ISO 527-3:2018) | |
| Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotopic fibre-reinforced plastic composites (ISO 527-4:1997) | |
| Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2021, Corrected version 2022-02) | |
| Plastics - Determination of tensile properties - Part 4: Test conditions for isotropic and orthotropic fibre-reinforced plastic composites (ISO 527-4:2023) | |
| Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2009) | |
| Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites (ISO 527-5:2021) | |
| PLASTICS - DETERMINATION OF WATER ABSORPTION (ISO 62:1999) | |
| Plastics - Determination of water absorption (ISO 62:2008) | |
| Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:1983) | |
| Plastics - Film and sheeting - Determination of tear resistance - Part 1: Trouser tear method (ISO 6383-1:2015) | |
| Plastics - Film and sheeting - Determination of tear resistance - Part 2: Elmendorf method (ISO 6383-2:1983) | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of residual vinyl chloride monomer - Gas chromatographic method (ISO 6401:1985) | |
| Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer - Gas-chromatographic method (ISO 6401:2008) | |
| Plastics - Poly(vinyl chloride) - Determination of residual vinyl chloride monomer using gas-chromatographic method (ISO 6401:2022) | |
| PLASTICS - SMOKE GENERATION - PART 1: GUIDANCE ON OPTICAL-DENSITY TESTING. (ISO 5659-1:1996) | |
| PLASTICS - SMOKE GENERATION - PART 2: DETERMINATION OF OPTICAL DENSITY BY A SINGLE-CHAMBER TEST (ISO 5659-2:1994, INCLUDING TECHNICAL CORRIGENDUM 1:1997) | |
| Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2006) | |
| Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2012) | |
| Plastics - Smoke generation - Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) | |
| PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF MOISTURE CONTENT (ISO 585:1990) | |
| Plastics - Unsaturated polyester resins - Determination of reactivity at 80 °C (conventional method) (ISO 584:1982) | |
| Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2006) | |
| Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) | |
| Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2023) | |
| PLASTICS HOSES, TEXTILE-REINFORCED, FOR COMPRESSED AIR - SPECIFICATION. (ISO 5774:1997) | |
| PLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS. SPECIFICATION. (ISO 6224:1995). | |
| Plastics piping and ducting systems - Injection-moulded thermoplastics fittings - Methods for visually assessing the effects of heating (ISO 580:2005) | |
| PLASTICS. DETERMINATION OF COMPRESSIVE PROPERTIES (ISO 604:1993). | |
| PLASTICS. DETERMINATION OF ENVIRONMENTAL STRESS CRACKING (ESC). CONSTANT-TENSILE-STR ESS METHOD. (ISO 6252:1992). | |
| PLASTICS. DETERMINATION OF POURABILITY. (ISO 6186:1998). | |
| PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 1: GENERAL PRINCIPLES (ISO 527-1:1993 INCLUDING CORR 1:1994). | |
| PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 2: TEST CONDITIONS FOR MOULDING AND EXTRUSION PLASTICS. (ISO 527-2:1993 INCLUDING CORR 1: 1994). | |
| PLASTICS. DETERMINATION OF TENSILE PROPERTIES. PART 5: TEST CONDITIONS FOR UNIDIRECTIONAL FIBRE-REINFORCED PLASTIC COMPOSITES. (ISO 527-5:1997). | |
| Polymeric materials, cellular flexible - Polyurethane foam for load-bearing applications excluding carpet underlay - Specification (ISO 5999:1982) | |
| Powder metallurgy - Hot isostatic pressing - Argon detection using gas chromatography and mass spectrometry techniques (ISO 5842:2022) | |
| PULP - ESTIMATION OF DIRT AND SHIVES - PART 1:INSPECTION OF LABORATORY SHEETS (ISO 5350-1:1998) | |
| PULP - ESTIMATION OF DIRT AND SHIVES - PART 2: INSPECTION OF MILL SHEETED PULP (ISO 5350-2:1998) | |
| PULPS - DETERMINATION OF DRAINABILITY - PART 1 : SCHOPPER-RIEGLER METHOD. (ISO 5267-1:1999) | |
| Pulps - Determination of drainability - Part 1: Schopper-Riegler method. (ISO 5267-1:1999) | |
| Pulps - Estimation of dirt and shives - Part 1: Inspection of laboratory sheets by transmitted light (ISO 5350-1:2006) | |
| Pulps - Estimation of dirt and shives - Part 2: Inspection of mill sheeted pulp by transmitted light (ISO 5350-2:2006) | |
| Pulps - Laboratory beating - Part 2: PFI mill method (ISO 5264-2:2011) | |
| Pulps - Laboratory beating - Part 2: PFI mill method. (ISO 5264-2:2002) | |
| Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2012) | |
| Pulps - Laboratory sheets - Determination of physical properties (ISO 5270:2022) | |
| Pulps - Laboratory wet disintegration - Part 1: Disintegration of chemical pulps (ISO 5263-1:2004) | |
| Pulps - Laboratory wet disintegration - Part 2: Disintegration of mechanical pulps at 20 degrees C (ISO 5263-2:2004) | |
| Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at > 85 degrees C (ISO 5263-3:2004) | |
| Pulps - Laboratory wet disintegration - Part 3: Disintegration of mechanical pulps at = 85°C (ISO 5263-3:2023) | |
| Pulps - Preparation of laboratory sheets for physical testing - Part 1: Conventional sheet-former method (ISO 5269-1:2005) | |
| PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 1: CONVENTIONAL SHEET-FORMER METHOD. (ISO 5269-1:1998) | |
| PULPS - PREPARATION OF LABORATORY SHEETS FOR PHYSICAL TESTING - PART 2: RAPID-KÖTHEN METHOD. (ISO 5269-2:1998) | |
| Pulps - Preparation of laboratory sheets for physical testing - Part 2: Rapid-Köthen method (ISO 5269-2:2004) | |
| PULPS. LABORATORY SHEETS. DETERMINATION OF PHYSICAL PROPERTIES. (ISO 5270:1998) | |
| PULPS. LABORATORY WET DISINTEGRATION. (ISO 5263:1995). | |
| Resistance spot welding - Electrode adaptors, female taper 1:10 (ISO 5829:1984) | |
| Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for end-thrust electrodes. (ISO 5183-2:2000) | |
| Resistance spot welding - Male electrode caps (ISO 5830:1984) | |
| Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2008) | |
| Resistance welding - Materials for electrodes and ancillary equipment (ISO 5182:2016) | |
| Resistance welding - Spot welding electrode caps (ISO 5821:2009) | |
| Resistance welding - Spot welding electrodes - Female electrode caps (ISO 5821:2025) | |
| RESISTANCE WELDING EQUIPMENT - ELECTRODE ADAPTORS, MALE TAPER 1:10 - PART 1:CONICAL FIXING, TAPER 1:10. (ISO 5183-1:1998) | |
| Resistance welding equipment - Transformers - General specifications applicable to all transformers (ISO 5826:2014) | |
| Resistance welding equipment. Secondary connecting cables with terminals connected to water-cooled lugs. Dimensions and characteristics. (ISO 5828:2001). | |
| RESISTANCE WELDING EQUIPMENT. SECONDARY CONNECTING CABLES WITH TERMINALS CONNECTED TO WATERCOOLED LUGS. DIMENSIONS AND CHARACTERISTICS. (ISO 5828:1983). | |
| Resistance welding equipment. Transformers. General specifications applicable to all transformers (ISO 5826:1999) | |
| REUSABLE ALL-GLASS OR METAL-AND-GLASS SYRINGES FOR MEDICAL USE. PART 2: DESIGN, PERFORMANCE REQUIREMENTS AND TEST. (ISO 595-2:1987). | |
| RUBBER HOSE AND HOSE ASSEMBLIES FOR TRANSFERRING ANHYDROUS AMMONIA. SPECIFICATION (INCLUDING CORR 1:1995). | |
| Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2005) | |
| Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2017) | |
| Rubber hoses and hose assemblies for saturated steam - Specification (ISO 6134:2024) | |
| Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2008) | |
| Rubber hoses and hose assemblies for transferring anhydrous ammonia - Specification (ISO 5771:2024) | |
| Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2010) | |
| Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique) (ISO 6179:2017) | |
| Rubber, vulcanized or thermoplastic - Rubber sheets and rubber-coated fabrics - Determination of transmission rate of volatile liquids (gravimetric technique). (ISO 6179:1998) | |
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:1999) | |
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 1: Taber abrader (ISO 5470-1:2016) | |
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2003) | |
| Rubber- or plastics-coated fabrics - Determination of abrasion resistance - Part 2: Martindale abrader (ISO 5470-2:2021) | |
| Rubber- or plastics-coated fabrics - Determination of blocking resistance (ISO 5978:2023) | |
| Rubber- or plastics-coated fabrics - Determination of resistance to combined shear flexing and rubbing (ISO 5981:2007) | |
| RUBBER- OR PLASTICS-COATED FABRICS. DETERMINATION OF RESISTANCE TO COMBINED SHEAR FLEXING AND RUBBING. (ISO 5981:1997). | |
| Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) (Endorsed by Asociación Española de Normalización in February of 2018.) | |
| Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005 and ISO 5495:2005/Cor 1:2006) | |
| Sensory analysis - Methodology - Paired comparison test (ISO 5495:2005/Amd 1:2016) (Endorsed by Asociación Española de Normalización in September of 2017.) | |
| Sensory analysis - Vocabulary (ISO 5492:2008) | |
| Sensory analysis - Vocabulary - Amendment 1 (ISO 5492:2008/Amd 1:2016) | |
| SHIPBUILDING AND MARINE STRUCTURES. FILLING CONNECTION FOR DRINKING WAER TANKS. PART 2: COMPONENTS. (ISO 5620-2:1992). | |
| SHIPBUILDING AND MARINE STRUCTURES. FILLING CONNECTION FOR DRINKING WATER TANKS. PART 1: GENERAL REQUIREMENTS. (ISO 5620-1:1992). | |
| SHIPBUILDING. TRAWL WINCHES (ISO 6115:1988). | |
| Ships and marine technology - Small weathertight steel hatches (ISO 5778:1998). (Endorsed by AENOR in June of 2000.) | |
| Ships and marine technology - Weathertight single-leaf steel doors (ISO 6042:1998) (Endorsed by AENOR in June of 2000.) | |
| Ships and marine technology- Magnetic compasses, binnacles and azimuth reading devices- Class B. (ISO 613:2000) | |
| Sintered metal material - Specifications (ISO 5755:2022) | |
| Sintered metal materials - Specifications (ISO 5755:2012) | |
| Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2017) | |
| Sintered metal materials, excluding hardmetals - Unnotched impact test piece (ISO 5754:2023) | |
| Soil, treated biowaste, sludge and waste - Digestion of aqua regia soluble fractions of elements (ISO 54321:2020) (Endorsed by Asociación Española de Normalización in March of 2021.) | |
| Solid biofuels - Determination of fines content in pellets (ISO 5370:2023) | |
| STARCH HYDROLYSIS PRODUCTS. DETERMINATION OF REDUCING POWER AND DEXTROSE EQUIVALENT. LANE AND EYNON CONSTANT TITRE METHOD. (ISO 5377:1981). | |
| STARCH HYDROLYSIS PRODUCTS. DETERMINATION OF WATER CONTENT. MODIFIED KARL FISCHER METHOD. (ISO 5381:1983). | |
| STARCHES AND DERIVED PRODUCTS. DETERMINATION OF CHLORIDE CONTENT. POTENTIOMETRIC METHOD. (ISO 5810:1982). | |
| STARCHES AND DERIVED PRODUCTS. DETERMINATION OF NITROGEN CONTENT BY THE KJELDHAL METHOD. SPECTROPHOTOMETRIC METHOD. (ISO 5378:1978). | |
| STARCHES AND DERIVED PRODUCTS. DETERMINATION OF SULPHATED ASH. (ISO 5809:1982). | |
| Technical drawings - Projection methods - Part 4: Central projection. (ISO 5456-4:1996) | |
| TECHNICAL DRAWINGS. PROJECTION METHODS. PART 1: SYNOPSIS (ISO 5456-1:1996) | |
| TECHNICAL DRAWINGS. PROJECTION METHODS. PART 2: ORTHOGRAPHIC REPRESENTATIONS (ISO 5456-2:1996) | |
| TECHNICAL DRAWINGS. PROJECTION METHODS. PART 3: AXONOMETRIC REPRESENTATIONS (ISO 5456-3:1996) | |
| TECHNICAL DRAWINGS. SCALES. (ISO 5455:1979). | |
| TECHNICAL DRAWINGS. SIMPLIFIED REPRESENTATION OF BARS AND PROFILE SECTIONS (ISO 5261:1995) | |
| TECHNICAL DRAWINGS. SIMPLIFIED REPRESENTATION OF THE ASSEMBLY OF PARTS WITH FASTENERS. PART 1: GENERAL PRINCIPLES (ISO 5845-1:1995) | |
| Technical product documentation - Construction documentation - Indication of limit deviations (ISO 6284:2023) (Endorsed by Asociación Española de Normalización in March of 2024.) | |
| Technical product documentation - Sizes and layout of drawing sheets - Amendment 1 (ISO 5457:1999/Amd 1:2010) | |
| TECHNICAL PRODUCT DOCUMENTATION. SIZES AND LAYOUT OF DRAWING SHEETS (ISO 5457:1999) | |
| TECHNICAL SPECIFICATIONS FOR CENTRIFUGAL PUMPS - CLASS II. (ISO 5199:2002) | |
| Test sieves for cereals (ISO 5223:1995, including Amendment 1:1999) | |
| Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2012) | |
| Textiles - Domestic washing and drying procedures for textile testing (ISO 6330:2021) | |
| Textiles - Domestic washing and drying procedures for textile testing - Amendment 1 (ISO 6330:2000/Amd 1:2008) | |
| TEXTILES. DOMESTIC WASHING AND DRYING PROCEDURES FOR TEXTILE TESTING. (ISO 6330:2000). | |
| Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2005) | |
| Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) | |
| Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2024) | |
| Thermoplastics pipes - Determination of tensile properties - Part 1: General test method (ISO 6259-1:2015) | |
| Thermoplastics pipes - Determination of tensile properties - Part 1: General test method. (ISO 6259-1:1997) | |
| Thermoplastics pipes - Determination of tensile properties - Part 2: Pipes made of unplasticized poly(vinyl chloride) (PVC-U), oriented unplasticized poly(vinyl chloride (PVC-O), chlorinated poly (vinyl chloride) (PVC-C) and high-impact poly... | |
| Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes (ISO 6259-3:2015) | |
| Titanium dioxide pigments for paints - Part 1: Specifications and methods of test. (ISO 591-1:2000) | |
| Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004) | |
| Tractors and machinery for agriculture and forestry - Guards for power take-off (PTO) drive-shafts - Strength and wear tests and acceptance criteria (ISO 5674:2004, corrected version 2005-07-01) | |
| Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 1: Abrasion testing apparatus (ISO 6370-1:1991) | |
| Vitreous and porcelain enamels - Determination of the resistance to abrasion - Part 2: Loss in mass after sub-surface abrasion (ISO 6370-2:2020) | |
| Water quality - Determination of biochemical oxygen demand after n days (BODn) - Part 1: Dilution and seeding method with allylthiourea addition (ISO 5815-1:2019) | |
| Water quality - Determination of dissolved oxygen - Electrochemical probe method (ISO 5814:2012) | |
| Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO 6341:2012) | |
| WATER QUALITY - ENUMERATION OF CULTURABLE MICRO-ORGANISMS. COLONY COUNT BY INOCULATION IN A NUTRIENT AGAR CULTURE MEDIUM (ISO 6222:1999) | |
| Water quality - Sampling - Part 13: Guidance on sampling of sludges (ISO 5667-13:2011) | |
| Water quality - Sampling - Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling (ISO 5667-14:2014) | |
| Water quality - Sampling - Part 15: Guidance on the preservation and handling of sludge and sediment samples (ISO 5667-15:2009) | |
| WATER QUALITY - SAMPLING - PART 16: GUIDANCE ON BIOTESTING OF SAMPLES (ISO 5667-16:1998) | |
| Water quality - Sampling - Part 16: Guidance on biotesting of samples (ISO 5667-16:2017) | |
| Water quality - Sampling - Part 19: Guidance on sampling in marine sediments (ISO 5667-19:2004) | |
| Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2006) | |
| Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2020) | |
| Water quality - Sampling - Part 1: Guidance on the design of sampling programmes and sampling techniques (ISO 5667-1:2023) | |
| Water quality - Sampling - Part 23: Guidance on passive sampling in surface waters (ISO 5667-23:2011) | |
| Water quality - Sampling - Part 3: Guidance on the preservation and handling of water samples (ISO 5667-3:2003) | |
| Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2012) | |
| Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2018) | |
| Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO 5667-3:2024) | |
| Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014) | |
| WATER QUALITY. DETERMINATION OF CADMIUM BY ATOMIC ABSORPTION SPECTROMETRY. (ISO 5961:1994). | |
| WATER QUALITY. DETERMINATION OF THE INHIBITION OF THE MOBILITY OF DAPHNIA MAGNA STRAUS (CLADOCERA, CRUSTACEA). ACUTE TOXICITY TEST (ISO 6341:1996). | |
| WATER QUALITY. SAMPLING. PART 13: GUIDANCE ON SAMPLING OF SLUDGES FROM SEWAGE AND WATER TREATMENT WORKS. (ISO 5667-13:1997). | |
| WATER QUALITY. SAMPLING. PART 3: GUIDANCE ON THE PRESERVATION AND HANDLING OF SAMPLES. (ISO 5667-3:1994). | |
| Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003) | |
| Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003, corrected version:2005, including Technical Corrigendum 1:2006) | |
| Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2003/Cor.1 :2006) | |
| Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2014) | |
| Welding - Fusion-welded joints in steel, nickel, titanium and their alloys (beam welding excluded) - Quality levels for imperfections (ISO 5817:2023) | |
| Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2004) | |
| Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2015) | |
| Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2017) | |
| Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification (ISO 636:2024) | |
| Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2011) | |
| Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2017) | |
| Welding consumables - Technical delivery conditions for filler materials and fluxes - Type of product, dimensions, tolerances and markings (ISO 544:2024) | |
| Welding consumables - Technical delivery conditions for welding filler materials - Type of product, dimensions, tolerances and markings (ISO 544:2003) | |
| Wheat - Determination of the sedimentation index - Zeleny test (ISO 5529:2007) | |
| Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2013) | |
| Wheat flour - Physical characteristics of doughs - Part 1: Determination of water absorption and rheological properties using a farinograph (ISO 5530-1:2025) | |
| Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2012) | |
| Wheat flour - Physical characteristics of doughs - Part 2: Determination of rheological properties using an extensograph (ISO 5530-2:2025) |
| << Prev | Next >> |