AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| Aerosol bacterial retention test method for air-inlet on administration devices (ISO 24072:2023) | |
| Anaesthetic and respiratory equipment - Air entrainment devices (ISO 23372:2022) | |
| Anaesthetic and respiratory equipment - Cuff pressure indication, control and regulation devices (ISO 23371:2022) | |
| Anaesthetic and respiratory equipment - Low-flow nasal cannulae for oxygen therapy (ISO 23368:2022) | |
| Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2007) | |
| Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2015) | |
| Animal and vegetable fats and oils - Cocoa butter equivalents in cocoa butter and plain chocolate - Part 1: Determination of the presence of cocoa butter equivalents (ISO 23275-1:2006) | |
| Animal and vegetable fats and oils - Cocoa butter equivalents in cocoa butter and plain chocolate - Part 2: Quantification of cocoa butter equivalents (ISO 23275-2:2006) | |
| Anodizing of aluminium and its alloys - Determination of breakdown voltage and withstand voltage (ISO 2376:2019) | |
| Anodizing of aluminium and its alloys - Determination of electric breakdown potential (ISO 2376:2010) | |
| Automated liquid handling systems - Part 1: Vocabulary and general requirements (ISO 23783-1:2022) (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Automated liquid handling systems - Part 2: Measurement procedures for the determination of volumetric performance (ISO 23783-2:2022) (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Automated liquid handling systems - Part 3: Determination, specification and reporting of volumetric performance (ISO 23783-3:2022) (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010) (Endorsed by AENOR in July of 2011.) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO 24534-1:2010) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010) (Endorsed by AENOR in July of 2011.) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO 24534-2:2010) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 3: Vehicle data (ISO 24534-3:2010) (Endorsed by AENOR in July of 2011.) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 3: Vehicle data (ISO 24534-3:2010) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO 24534-4:2010) (Endorsed by AENOR in July of 2011.) | |
| Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO 24534-4:2010) | |
| Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques - Amendment 1 (ISO 24534-4:2010/Amd 1:2019) | |
| Basic semen examination - Specification and test methods (ISO 23162:2021) | |
| Biogas systems - Non-household and non-gasification (ISO 24252:2021) | |
| Biogas systems - Non-household and non-gasification | |
| Breathing system filters for anaesthetic and respiratory use - Part 1: Salt test method to assess filtration performance (ISO 23328-1:2003) | |
| Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002) | |
| Building information modelling (BIM) - Data templates for construction objects used in the life cycle of built assets - Concepts and principles (ISO 23387:2020) (Endorsed by Asociación Española de Normalización... | |
| Building information modelling (BIM) - Data templates for objects used in the life cycle of assets (ISO 23387:2025) (Endorsed by Asociación Española de Normalización in January of 2026.) | |
| Building information modelling and other digital processes used in construction - Methodology to describe, author and maintain properties in interconnected data dictionaries (ISO 23386:2020) (Endorsed by Asociación Española de Normalización... | |
| Carbon based films - Determination of optical properties of amorphous carbon films by spectroscopic ellipsometry (ISO 23216:2021) | |
| Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO 25539-1:2003 including Amd 1:2005) | |
| Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO 25539-1:2017) (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2008) | |
| Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) | |
| Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2020) | |
| Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) | |
| Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2024) (Endorsed by Asociación Española de Normalización in December of 2024.) | |
| Cathodic protection of offshore wind structures (ISO 24656:2022) | |
| Cereals and cereal products - Sampling (ISO 24333:2009) | |
| Cheese - Guidance on sample preparation for physical and chemical testing (ISO 24223:2021) | |
| Cheese and processed cheese products, caseins and caseinates - Determination of fat content - Gravimetric method (ISO 23319:2022) | |
| Chemicals for the leather tanning industry - Determination of cyclosiloxanes (ISO 23649:2025) | |
| Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2007) | |
| Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023) (Endorsed by Asociación Española de Normalización in May of 2023.) | |
| Cosmetics - Analytical methods - Determination of traces of mercury in cosmetics by atomic absorbtion spectrometry (AAS) cold vapour technology after pressure digestion (ISO 23821:2022) | |
| Cosmetics - Analytical methods - Direct determination of traces of mercury in cosmetics by thermal decomposition and atomic absorption spectrometry (mercury analyser) (ISO 23674:2022) | |
| Cosmetics - Determination of sunscreen UVA photoprotection in vitro (ISO 24443:2021, Corrected version 2022-02) | |
| Cosmetics - Measurement of the sunscreen efficacy by diffuse reflectance spectroscopy (ISO 23698:2024) | |
| Cosmetics - Sun protection test methods - In vitro determination of sun protection factor (SPF) (ISO 23675:2024) | |
| Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2011) | |
| Cosmetics - Sun protection test methods - In vivo determination of sunscreen UVA protection (ISO 24442:2022) | |
| Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) (ISO 24444:2010) | |
| Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) (ISO 24444:2019) | |
| Cosmetics - Sun protection test methods - In vivo determination of the sun protection factor (SPF) - Amendment 1 (ISO 24444:2019/Amd 1:2022) | |
| Cream - Determination of fat content - Gravimetric method (Reference method) (ISO 2450:2008) | |
| CREAM. DETERMINATION OF FAT CONTENT. GRAVIMETRIC METHOD (REFERENCE METHOD) (ISO 2450:1999) | |
| Cryogenic vessels - Cleanliness for cryogenic service (ISO 23208:2017) | |
| Cryogenic vessels - Cleanliness for cryogenic service - Amendment 1 (ISO 23208:2017/Amd 1:2020) | |
| Cryogenic vessels - Pumps for cryogenic service (ISO 24490:2016) | |
| Definitions and technical criteria for foods and food ingredients suitable for vegetarians or vegans and for labelling and claims (ISO 23662:2021) | |
| Dentistry - Chairside denture base relining materials - Part 1: Hard type materials (ISO 23401-1:2023) | |
| Dentistry - Classification of tooth restorations preparation (ISO 24395:2023) | |
| Dentistry - Corrosion resistance of dental amalgam (ISO 23325:2020) | |
| Dentistry - Dental amalgam (ISO 24234:2015) | |
| Dentistry - Excavators (ISO 23940:2021) | |
| Dentistry - Intraoral camera (ISO 23450:2021) | |
| Dentistry - Mercury and alloys for dental amalgam (ISO 24234:2004) | |
| Dentistry - Mercury and alloys for dental amalgam - Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury (ISO 24234:2004/A1:2011) | |
| Dentistry - Portable dental equipment for use in non-permanent healthcare environment - Part 1: General requirements (ISO 23402-1:2020) | |
| Dentistry - Portable dental equipment for use in non-permanent healthcare environment - Part 3: Portable suction equipment (ISO 23402-3:2024) | |
| Dentistry - Test methods for machining accuracy of computer-aided milling machines (ISO 23298:2023) | |
| Dentistry - Tissue punches (ISO 23445:2021) | |
| Determination of sunscreen UVA photoprotection in vitro (ISO 24443:2012) | |
| Determination of the silanol group content on the surface of fumed silica - Reaction gas chromatographic method (ISO 23157:2021) | |
| Determination of uranium content in samples coming from the nuclear fuel cycle by L-absorption edge spectrometry (ISO 24459:2021) (Endorsed by Asociación Española de Normalización in September of 2023.) | |
| Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:1982) | |
| Electrodeposited nickel coatings on magnetic and non-magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2361:2025) | |
| Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO 25110:2017) | |
| Ellipsometry - Principles (ISO 23131:2021) | |
| Energy efficiency of industrial trucks - Test methods - Part 1: General (ISO 23308-1:2025) | |
| Energy efficiency of industrial trucks - Test methods - Part 2: Operator-controlled self-propelled trucks, burden and personnel carriers and towing tractors (ISO 23308-2:2025) | |
| Energy efficiency of industrial trucks - Test methods - Part 3: Container handling lift trucks (ISO 23308-3:2025) | |
| Energy efficiency of industrial trucks - Test methods - Part 6: Container straddle carrier (ISO 23308-6:2025) | |
| Ergonomics - Accessible design - Auditory signals for consumer products (ISO 24500:2010) (Endorsed by AENOR in January of 2011.) | |
| Ergonomics - Accessible design - Indicator lights on consumer products (ISO 24550:2019) (Endorsed by Asociación Española de Normalización in February of 2020.) | |
| Ergonomics - Accessible design - Sound pressure levels of auditory signals for consumer products (ISO 24501:2010) (Endorsed by AENOR in February of 2011.) | |
| Ergonomics - Accessible design - Sound pressure levels of spoken announcements for products and public address systems (ISO 24504:2014) (Endorsed by AENOR in August of 2016.) | |
| Ergonomics - Accessible design - Specification of age-related luminance contrast for coloured light (ISO 24502:2010) (Endorsed by AENOR in February of 2011.) | |
| Ergonomics - Accessible design - Spoken instructions of consumer products (ISO 24551:2019) (Endorsed by Asociación Española de Normalización in February of 2020.) | |
| Ergonomics - Accessible design - Tactile dots and bars on consumer products (ISO 24503:2011) | |
| Fasteners - Prevailing torque steel nuts - Functional properties (ISO 2320:2015) | |
| Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2005) | |
| Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2010) | |
| Fibre ropes - Determination of certain physical and mechanical properties (ISO 2307:2019) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 1: Tap density (ISO 23145-1:2007) (Endorsed by AENOR in June of 2016.) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Determination of bulk density of ceramic powders - Part 2: Untapped density (ISO 23145-2:2012) (Endorsed by AENOR in June of 2016.) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Methods for chemical analysis of zirconium oxide powders (ISO 23739:2021) (Endorsed by Asociación Española de Normalización in October of 2023.) | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test method for fracture toughness of monolithic ceramics at room temperature by chevron-notched beam (CNB) method (ISO 24370:2005) (Endorsed by Asociación Española... | |
| Fine ceramics (advanced ceramics, advanced technical ceramics) - Test methods for fracture toughness of monolithic ceramics - Single-edge V-notch beam (SEVNB) method (ISO 23146:2012) (Endorsed by AENOR in June of... | |
| Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:1997) | |
| Flexible and rigid cellular polymeric materials - Accelerated ageing tests (ISO 2440:2019) | |
| Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 1 (ISO 2440:1997/Amd 1:2010) | |
| Flexible and rigid cellular polymeric materials - Accelerated ageing tests - Amendment 2 (ISO 2440:1997/AMD 2:2014) | |
| Flexible cellular polymeric materials - Determination of hardness (indentation technique) (ISO 2439:2008) | |
| Flexible cellular polymeric materials - Determination of hardness (indentation technique). (ISO 2439:1997, including Technical Corrigendum 1:1998) | |
| Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2017) | |
| Floating leisure articles for use on and in the water - Part 1: Classification, materials, general requirements and test methods (ISO 25649-1:2024) | |
| Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2017) | |
| Floating leisure articles for use on and in the water - Part 2: Consumer information (ISO 25649-2:2024) | |
| Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2017) | |
| Floating leisure articles for use on and in the water - Part 3: Additional specific safety requirements and test methods for Class A devices (ISO 25649-3:2024) | |
| Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2017) | |
| Floating leisure articles for use on and in the water - Part 4: Additional specific safety requirements and test methods for Class B devices (ISO 25649-4:2024) | |
| Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2017) | |
| Floating leisure articles for use on and in the water - Part 5: Additional specific safety requirements and test methods for Class C devices (ISO 25649-5:2024) | |
| Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2017) | |
| Floating leisure articles for use on and in the water - Part 6: Additional specific safety requirements and test methods for Class D devices (ISO 25649-6:2024) | |
| Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for class E devices (ISO 25649-7:2017) | |
| Floating leisure articles for use on and in the water - Part 7: Additional specific safety requirements and test methods for Class E devices (ISO 25649-7:2024) | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - General requirements and definitions (ISO 24276:2006) | |
| Foodstuffs - Methods of analysis for the detection of genetically modified organisms and derived products - General requirements and definitions (ISO 24276:2006/Amd 1:2013) | |
| Footwear - Attachment strength of straps, trims and accessories (ISO 24263:2020) | |
| Footwear - Determination of coefficient of friction for footwear and sole components - Test method (ISO 24267:2020) | |
| Footwear - Test methods for hollow and compact heels and top pieces - Top piece attachment strength (ISO 24264:2020) | |
| Footwear - Test methods for uppers - Resistance to rubbing using a rubber strip (ISO 24265:2020) | |
| Footwear - Test methods for whole shoe - Flexing durability (ISO 24266:2020) | |
| Foundry machinery - Safety requirements for molding and coremaking machinery and associated equipment (ISO 23062:2022) | |
| Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2011) | |
| Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2020) | |
| Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2011) | |
| Friction stir welding - Aluminium - Part 2: Design of weld joints (ISO 25239-2:2020) | |
| Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2011) | |
| Friction stir welding - Aluminium - Part 3: Qualification of welding operators (ISO 25239-3:2020) | |
| Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2011) | |
| Friction stir welding - Aluminium - Part 4: Specification and qualification of welding procedures (ISO 25239-4:2020) | |
| Friction stir welding - Aluminium - Part 5: Quality and inspection requirements (ISO 25239-5:2011) | |
| Friction stir welding - Aluminium - Part 5: Quality and inspection requirements (ISO 25239-5:2020) | |
| Gas cylinders - Ball valves - Specification and testing (ISO 23826:2021) | |
| Gas cylinders - Periodic inspection and testing of welded steel pressure drums - Capacities up to 1 000 l (ISO 23088:2020) | |
| Gas cylinders - Seamless, welded and composite cylinders for compressed and liquefied gases (excluding acetylene) - Inspection at time of filling (ISO 24431:2016) | |
| GAS WELDING EQUIPEMENT. PRESSURE RGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR. (ISO 2503:1998). | |
| Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009)... | |
| Gas welding equipment - Pressure regulators and pressure regulators with flow-metering devices for gas cylinders used in welding, cutting and allied processes up to 300 bar (30 MPa) (ISO 2503:2009/Amd... | |
| GAS WELDING EQUIPMENT. PRESSURE REGULATORS FOR GAS CYLINDERS USED IN WELDING, CUTTING AND ALLIED PROCESSES UP TO 300 BAR. (ISO 2503:1998). | |
| Gauging of hexagon sockets (ISO 23429:2004). | |
| Geometrical product specfications (GPS) - Series of angles and slopes on prisms (ISO 2538:1998) | |
| Geometrical product specification (GPS) - Surface texture: Areal - Part 606: Nominal characteristics of non-contact (focus variation) instruments (ISO 25178-606:2015) (Endorsed by AENOR in September of 2015.) | |
| Geometrical product specification (GPS) - Surface texture: Areal - Part 70: Material measures (ISO 25178-70:2014) (Endorsed by AENOR in January of 2015.) | |
| Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) (Endorsed by AENOR in July of 2011.) | |
| Geometrical product specifications (GPS) - Characteristics and conditions - Definitions (ISO 25378:2011) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 1: Indication of surface texture (ISO 25178-1:2016) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2012) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 2: Terms, definitions and surface texture parameters (ISO 25178-2:2021) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 3: Specification operators (ISO 25178-3:2012) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 600: Metrological characteristics for areal-topography measuring methods (ISO 25178-600:2019) (Endorsed by Asociación Española de Normalización in May of 2020.) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Design and characteristics of contact (stylus) instruments (ISO 25178-601:2025) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 601: Nominal characteristics of contact (stylus) instruments (ISO 25178-601:2010) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Design and characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2025) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 602: Nominal characteristics of non-contact (confocal chromatic probe) instruments (ISO 25178-602:2010) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Design and characteristics of non-contact (phase shifting interferometry) instruments (ISO 25178-603:2025) (Endorsed by Asociación Española de Normalización in April... | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 603: Nominal characteristics of non-contact (phase-shifting interferometric microscopy) instruments (ISO 25178-603:2013) (Endorsed by AENOR in January of 2015.) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Design and characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2025) (Endorsed by Asociación Española de Normalización in April... | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 604: Nominal characteristics of non-contact (coherence scanning interferometry) instruments (ISO 25178-604:2013) (Endorsed by AENOR in January of 2015.) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Design and characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2025) (Endorsed by Asociación Española de Normalización in April... | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 605: Nominal characteristics of non-contact (point autofocus probe) instruments (ISO 25178-605:2014) (Endorsed by AENOR in January of 2015.) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 607: Nominal characteristics of non-contact (confocal microscopy) instrumentss (ISO 25178-607:2018) (Endorsed by Asociación Española de Normalización in May of 2020.)... | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 6: Classification of methods for measuring surface texture (ISO/FDIS 25178-6:2009) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 700: Calibration, adjustment and verification of areal topography measuring instruments (ISO 25178-700:2022) (Endorsed by Asociación Española de Normalización in February... | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 701: Calibration and measurement standards for contact (stylus) instruments (ISO 25178-701:2010) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-1:2017) (Endorsed by Asociación Española de Normalización in March of 2018.) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 71: Software measurement standards (ISO 25178-71:2012) (Endorsed by AENOR in October of 2013.) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p (ISO 25178-72:2017) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 72: XML file format x3p - Amendment 1 (ISO 25178-72:2017/Amd 1:2020) | |
| Geometrical product specifications (GPS) - Surface texture: Areal - Part 73: Terms and definitions for surface defects on material measures (ISO 25178-73:2019) (Endorsed by Asociación Española de Normalización in May... | |
| Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) (Endorsed by AENOR in November of 2014.) | |
| Geometrical product specifications (GPS) - Wedges - Part 1: Series of angles and slopes (ISO 2538-1:2014) | |
| Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) (Endorsed by AENOR in November of 2014.) | |
| Geometrical product specifications (GPS) - Wedges - Part 2: Dimensioning and tolerancing (ISO 2538-2:2014) | |
| Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2008) | |
| Geosynthetics - Determination of compression behaviour - Part 1: Compressive creep properties (ISO 25619-1:2021) | |
| Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2008) | |
| Geosynthetics - Determination of compression behaviour - Part 2: Determination of short-term compression behaviour (ISO 25619-2:2015) | |
| Guidance for the preparation and quality management of fluids for haemodialysis and related therapies (ISO 23500:2014) | |
| Health Informatics - Interoperability and integration reference architecture - Model and framework (ISO 23903:2021, Corrected version 2021-07) | |
| Health informatics - Pseudonymization (ISO 25237:2017) (Endorsed by Asociación Española de Normalización in March of 2017.) | |
| Household biogas system requirements: design, installation, operation, maintenance and safety (ISO 23590:2020) | |
| Hydrometric uncertainty guidance (HUG) (ISO 25377:2020) | |
| In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) | |
| Industrial trucks - Additional requirements for automated functions on trucks (ISO 24134:2006) | |
| Industrial valves - Design validation-testing of valves (ISO 23632:2021) | |
| Intelligent transport systems - Automatic vehicle and equipment identification - Electronic registration identification (ERI) for vehicles - Part 3: Vehicle data (ISO 24534-3:2016) | |
| Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures (ISO 24978:2009) | |
| Iron blue pigments - Specifications and methods of test. (ISO 2495:1995) | |
| Jewellery and precious metals - Grading polished diamonds - Terminology, classification and test methods (ISO 24016:2020, including corrected version 2024-03) (Endorsed by Asociación Española de Normalización in May of 2026.)... | |
| Jewellery and precious metals - Non destructive precious metal fineness confirmation by ED-XRF (ISO 23345:2021) (Endorsed by Asociación Española de Normalización in May of 2026.) | |
| Jewellery and precious metals - Specifications for 1 kilogram gold bar (ISO 24018:2020) (Endorsed by Asociación Española de Normalización in May of 2026.) | |
| Laboratory glassware - Wide-necked boiling flasks (ISO 24450:2005) | |
| Leather - Chemical, physical and mechanical and fastness test - Sampling location (ISO 2418:2017) | |
| Leather - Chemical, physical and mechanical and fastness tests - Sampling location. (ISO 2418:2002) | |
| Leather - Chemical, physical, mechanical and fastness tests - Position and preparation of specimens for testing (ISO 2418:2023) | |
| Leather - Organic fluorine - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography/tande m mass spectrometry detector (LC-MS/MS) (ISO 23702-1:2018) | |
| Leather - Per- and polyfluoroalkyl substances - Part 1: Determination of non-volatile compounds by extraction method using liquid chromatography (ISO 23702-1:2023) | |
| Leather - Physical and mechanical tests - Determination of apparent density and mass per unit area (ISO 2420:2017) | |
| Leather - Physical and mechanical tests - Determination of apparent density. (ISO 2420:2002) | |
| Leather - Physical and mechanical tests - Determination of the static absorption of water (ISO 2417:2016) | |
| Leather - Physical and mechanical tests - Determination of the static absorption of water. (ISO 2417:2002) | |
| Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2007) | |
| Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2017) | |
| Leather - Physical and mechanical tests - Measurement of stitch tear resistance (ISO 23910:2019) | |
| Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2006) | |
| Leather - Physical and mechanical tests - Sample preparation and conditioning (ISO 2419:2012) | |
| Leather - Physical and mechanical tests - Sample preparation and conditioning. (ISO 2419:2002) | |
| Leather - Physical and mechanical tests - Specimen and test piece conditioning (ISO 2419:2024) | |
| Leather - Tests for colour fastness - Colour fastness to sea water (ISO 25089:2025) | |
| Machine tools - Safety - Turning machines (ISO 23125:2010) (Endorsed by AENOR in January of 2011.) | |
| Machine tools - Safety - Turning machines (ISO 23125:2010) | |
| Machine tools - Safety - Turning machines (ISO 23125:2015, Corrected version 2016-03-15) | |
| Machine tools - Safety - Turning machines - Amendment 1 (ISO 23125:2010/Amd 1:2012) | |
| Measurement of radioactivity - Alpha emitting radionuclides - Generic test method using alpha spectrometry (ISO 23548:2024) (Endorsed by Asociación Española de Normalización in November of 2025.) | |
| Measurement of radioactivity - Gamma emitting radionuclides - Reference measurement standard specifications for the calibration of gamma-ray spectrometers (ISO 23547:2022) (Endorsed by Asociación Española de Normalización in September of 2023.)... | |
| Microbiology of the food chain - Methods for the detection of Anisakidae L3 larvae in fish and fishery products - Part 1: UV-press method (ISO 23036-1:2021) | |
| Microbiology of the food chain - Methods for the detection of Anisakidae L3 larvae in fish and fishery products - Part 2: Artificial digestion method (ISO 23036-2:2021) | |
| Microbiology of the food chain - Whole genome sequencing for typing and genomic characterization of bacteria - General requirements and guidance (ISO 23418:2022) | |
| Mining - Air quality control systems for operator enclosures - Performance requirements and test methods (ISO 23875:2021) | |
| Molecular in vitro diagnostic examinations - Specifications for pre-examination processes in metabolomics in urine, venous blood serum and plasma (ISO 23118:2021) | |
| Natural gas - Gas chromatographic requirements for hydrocarbon dewpoint calculation (ISO 23874:2006) | |
| NON-CONDUCTIVE COATINGS ON NON-MAGNETIC BASIS METALS. MEASUREMENT OF COATING THICKNESS. EDDY CURRENT METHOD. (ISO 2360:1982). | |
| Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) | |
| Non-conductive coatings on non-magnetic electrically conductive basis materials - Measurement of coating thickness - Amplitude-sensitive eddy current method (ISO 2360:2003) | |
| Non-destructive testing - Ultrasonic testing - Specification for calibration block No. 1 (ISO 2400:2012) | |
| Non-destructive testing - Ultrasonic testing - Specification for standard block No. 1 (ISO 2400:2025) | |
| Non-destructive testing - Ultrasonic testing with arrays - Vocabulary (ISO 23243:2020) | |
| Non-destructive testing of welds - Magnetic particle testing - Acceptance levels (ISO 23278:2015) | |
| Non-destructive testing of welds - Magnetic particle testing of welds - Acceptance levels (ISO 23278:2006) | |
| Non-destructive testing of welds - Penetrant testing - Acceptance levels (ISO 23277:2015) | |
| Non-destructive testing of welds - Penetrant testing of welds - Acceptance levels (ISO 23277:2006) | |
| Non-destructive testing of welds - Ultrasonic testing - Characterization of discontinuities in welds (ISO 23279:2017) | |
| Non-destructive testing of welds - Ultrasonic testing - Characterization of indications in welds (ISO 23279:2010) | |
| Non-destructive testing of welds - Ultrasonic testing - Use of automated total focusing technique (TFM) and related technologies (ISO 23864:2021) | |
| Nuclear criticality safety - Nuclear criticality safety training for operations (ISO 23133:2021) (Endorsed by Asociación Española de Normalización in February of 2023.) | |
| Oil and gas industries including lower carbon energy - Bulk material for offshore projects - Monorail beam and padeye (ISO 24202:2023) (Endorsed by Asociación Española de Normalización in April of... | |
| Oil and gas industries including lower carbon energy - Flare details for general refinery and petrochemical service (ISO 25457:2023) (Endorsed by Asociación Española de Normalización in December of 2023.) | |
| Oil and gas industries including lower carbon energy - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2022) (Endorsed by Asociación... | |
| Oil and gas industries including lower carbon energy - Nonmetallic materials in contact with media related to oil and gas production Part 4: Fiber-reinforced composite materials (ISO 23936-4:2024) | |
| Ophthalmic optics and instruments - Reporting aberrations of the human eye (ISO 24157:2008) | |
| Ophthalmic optics and instruments - Reporting aberrations of the human eye - Amendment 1 (ISO 24157:2008/Amd 1:2020) | |
| Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation (ISO 24013:2006) | |
| Optics and photonics - Lasers and laser-related equipment - Measurement of phase retardation of optical components for polarized laser radiation (ISO 24013:2023) (Endorsed by Asociación Española de Normalización in August... | |
| Packaging - Transport packaging for dangerous goods - Rigid plastics and plastics composite IBCs - Compatibility testing (ISO 23667:2007) | |
| Paints and varnishes - Cross-cut test (ISO 2409:2007) | |
| Paints and varnishes - Cross-cut test (ISO 2409:2013) | |
| Paints and varnishes - Cross-cut test (ISO 2409:2020) | |
| Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) | |
| Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2019, Corrected version 2019-09) | |
| Paints and varnishes - Determination of percentage volume of non-volatile matter by measuring the non-volatile matter content and the density of the coating material, and calculation of the theoretical spreading... | |
| Paints and varnishes - Determination of solvents in coating materials containing organic solvents only - Gas-chromatographic method (ISO 23322:2021) | |
| Paints and varnishes - Determination of water content - Gas-chromatographic method (ISO 23168:2019) | |
| PAINTS AND VARNISHES. CROSS-CUT TEST. (ISO 2409:1992). | |
| PAINTS AND VARNISHES. DETERMINATION OF FLOW TIME BY USE OF FLOW CUPS. (ISO 2431:1993, INCLUDING TECHNICAL CORRIGENDUM 1:1994). | |
| PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENIC STAINLESS STEEL. (ISO 2338:1997). | |
| PARALLEL PINS, OF UNHARDENED STEEL AND AUSTENITIC STAINLESS STEEL. (ISO 2338:1997). | |
| Petroleum products - Determination of cloud point - Automated step-wise cooling method (ISO 22995:2019) | |
| Petroleum products and related products - Determination of kinematic viscosity - Method by Stabinger type viscometer (ISO 23581:2024) | |
| Petroleum, petrochemical and natural gas industries - Bulk material for offshore projects - Pipe support (ISO 24200:2022) (Endorsed by Asociación Española de Normalización in July of 2022.) | |
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2015) (Endorsed by AENOR in September of 2015.) | |
| Petroleum, petrochemical and natural gas industries - Composite repairs for pipework - Qualification and design, installation, testing and inspection (ISO 24817:2017, Corrected version 2018-01-01) (Endorsed by Asociación Española de Normalización... | |
| Petroleum, petrochemical and natural gas industries - Flare details for general refinery and petrochemical service (ISO 25457:2008) (Endorsed by AENOR in February of 2009.) | |
| Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 1: Thermoplastics (ISO 23936-1:2009) (Endorsed by AENOR in May... | |
| Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) (Endorsed by AENOR in January... | |
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006) (Endorsed by AENOR in October of 2007.) | |
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2006/Cor 1:2007) (Endorsed by AENOR in May of 2008.) | |
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems (ISO 23251:2019) (Endorsed by Asociación Española de Normalización in October of 2020.) | |
| Petroleum, petrochemical and natural gas industries - Pressure-relieving and depressuring systems - Amendment 1 (ISO 23251:2007/Amd 1:2008) (Endorsed by AENOR in July of 2008.) | |
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 1: General introduction (ISO 23900-1:2015) | |
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 2: Determination of colouristic properties and ease of dispersion in plasticized polyvinyl chloride by two-roll... | |
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 3: Determination of colouristic properties and ease of dispersion of black and colour pigments in... | |
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 4: Determination of colouristic properties and ease of dispersion of white pigments in polyethylene by... | |
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 5: Determination by filter pressure value test (ISO 23900-5:2015) | |
| Pigments and extenders - Methods of dispersion and assessment of dispersibility in plastics - Part 6: Determination by film test (ISO 23900-6:2015) | |
| Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 1: Method by analysis of evolved carbon dioxide (ISO 23977-1:2020) | |
| Plastics - Determination of the aerobic biodegradation of plastic materials exposed to seawater - Part 2: Method by measuring the oxygen demand in closed respirometer (ISO 23977-2:2020) | |
| Plastics - Determination of the gas transmission rate of films and thin sheets under atmospheric pressure - Manometric method. (ISO 2556:1974) | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 1: Designation system (ISO 24024-1:2021) | |
| Plastics - Homopolymer and copolymer resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties (ISO 24024-2:2021) | |
| Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24023-1:2020) | |
| Plastics - Plasticized poly(vinyl chloride) (PVC-P) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24023-2:2020) | |
| Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24026-1:2020) | |
| Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24026-2:2020) | |
| Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 23153-1:2020) | |
| Plastics - Polyetheretherketone (PEEK) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 23153-2:2020) | |
| Plastics - Polystyrene (PS) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24022-1:2020) | |
| Plastics - Polystyrene (PS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24022-2:2020) | |
| PLASTICS - RESINS IN THE LIQUID STATE OR AS EMULSIONS OR DISPERSIONS - DETERMINATION OF APPARENT VISCOSITY BY THE BROOKFIELD TEST METHOD (ISO 2555:1989) | |
| Plastics - Resins in the liquid state or as emulsions or dispersions - Determination of apparent viscosity using a single cylinder type rotational viscometer method (ISO 2555:2018) | |
| Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 24025-1:2020) | |
| Plastics - Sulfone polymer moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 25137-1:2009) | |
| Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 24025-2:2020) | |
| Plastics - Sulfone polymer moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties (ISO 25137-2:2009) | |
| PLASTICS - UNSATURATED POLYESTER RESINS - DETERMINATION OF HYDROXIL VALUE (ISO 2554:1997) | |
| PLASTICS - UNSATURATED POLYESTER RESINS - MEASUREMENT OF GEL TIME AT 25 ºC (ISO 2535:1997) | |
| Plastics and rubber machines - Clamping systems - Part 1: Safety requirements for magnetic clamping systems (ISO 23582-1:2023) (Endorsed by Asociación Española de Normalización in May of 2023.) | |
| Plastics laboratory ware - Single-use Petri dishes for microbiological procedures (ISO 24998:2008) | |
| Plastics piping systems for pressure and non-pressure water supply, drainage or sewerage - Glass-reinforced thermosetting plastics (GRP) systems based on unsaturated polyester (UP) resin (ISO 23856:2021) | |
| Plastics-Unsaturated polyester resins- Measurement of gel time at ambient temperature. (ISO 2535:2001) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 1: General requirements (ISO 23500-1:2019) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 1: General requirements (ISO 23500-1:2024) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO 23500-2:2019) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO 23500-2:2024) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies (ISO 23500-3:2019) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies (ISO 23500-3:2024) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies (ISO 23500-4:2019) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies (ISO 23500-4:2024) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies (ISO 23500-5:2019) | |
| Preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies (ISO 23500-5:2024) | |
| PREVAILING TORQUE TYPE STEEL HEXAGON NUTS. MECHANICAL AND PERFORMANCE REQUIREMENTS. (ISO 2320:1997). | |
| Prevailing torque type steel nuts - Mechanical and performance properties (ISO 2320:2008) | |
| Principles for the analysis of microplastics present in the environment (ISO 24187:2023) | |
| Protective clothing - Protection against rain (ISO 24232:2024) (Endorsed by Asociación Española de Normalización in February of 2026.) | |
| Protective clothing - Protection against rain - Test method for ready-made garments against high-energy droplets from above (ISO 24231:2024) | |
| Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2007) (Endorsed by AENOR in August of 2009.) | |
| Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2015) (Endorsed by AENOR in January of 2016.) | |
| Public transport - Interoperable fare management system - Part 1: Architecture (ISO 24014-1:2021) (Endorsed by Asociación Española de Normalización in March of 2021.) | |
| Radiological protection - General requirements for proficiency tests for in vivo radiobioassay (ISO 23588:2023) (Endorsed by Asociación Española de Normalización in September of 2024.) | |
| Railway applications - Braking - General vocabulary (ISO 24478:2023, including corrected version 2024-04) | |
| Recreational diving services - Requirements for rebreather diver training - Decompression diving to 100 m (ISO 24807:2023) | |
| Recreational diving services - Requirements for rebreather diver training - Decompression diving to 45 m (ISO 24805:2022) | |
| Recreational diving services - Requirements for rebreather diver training - Decompression diving to 45 m | |
| Recreational diving services - Requirements for rebreather diver training - Decompression diving to 60 m (ISO 24806:2023) | |
| Recreational diving services - Requirements for rebreather diver training - No-decompression diving (ISO 24804:2022) | |
| Recreational diving services - Requirements for rebreather diver training - No-decompression diving | |
| Recreational diving services - Requirements for rebreather instructor training (ISO 24808:2024) | |
| Recreational diving services - Requirements for rebreather instructor training | |
| Recreational diving services - Requirements for recreational diving providers (ISO 24803:2017) | |
| Recreational diving services - Requirements for the training of recreational scuba divers - Part 1: Level 1 - Supervised diver (ISO 24801-1:2014) | |
| Recreational diving services - Requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver (ISO 24801-2:2014) | |
| Recreational diving services - Requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive leader (ISO 24801-3:2014) | |
| Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level 1 (ISO 24802-1:2014) | |
| Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2 (ISO 24802-2:2014) | |
| Refrigerated dispaly cabinets. Part 2: Classification, requirements and test conditions (ISO 23953-2:2005) | |
| Refrigerated display cabinets - Part 1: Vocabulary (ISO 23953-1:2005) | |
| Refrigerated display cabinets - Part 1: Vocabulary (ISO 23953-1:2015) | |
| Refrigerated display cabinets - Part 1: Vocabulary (ISO 23953-1:2023) | |
| Refrigerated display cabinets - Part 1: Vocabulary - Amendment 1 (ISO 23953-1:2005/Amd 1:2012) | |
| Refrigerated display cabinets - Part 2: Classification, requirements and test conditions (ISO 23953-2:2015) | |
| Refrigerated display cabinets - Part 2: Classification, requirements and test conditions (ISO 23953-2:2023) | |
| Refrigerated display cabinets. Part 2: Classification, requirements and test conditions. (ISO 23953-2:2005 + Amd 1:2012, Corrected version 2012-04-15). | |
| Refrigerating systems and heat pumps - Pressure relief devices and their associated piping - Methods for calculation (ISO 24664:2024) | |
| Remediation techniques applied at contaminated sites (ISO 24212:2024) (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| Requirements for sleeping bags - Part 1: Thermal and dimensional requirements (ISO 23537-1:2016) | |
| Requirements for sleeping bags - Part 1: Thermal and dimensional requirements - Amendment 1 (ISO 23537-1:2016/Amd 1:2018) | |
| Requirements for sleeping bags - Part 1: Thermal, mass and dimensional requirements for sleeping bags designed for limit temperatures of -20°C and higher (ISO 23537-1:2022) | |
| Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2016) | |
| Requirements for sleeping bags - Part 2: Fabric and material properties (ISO 23537-2:2023) | |
| Resilient and laminate floor coverings - Determination of indentation and residual indentation - Part 1: Residual indentation (ISO 24343-1:2007) | |
| Resilient and textile floor coverings - Determination of length, width and straightness of sheet (ISO 24341:2006) | |
| Resilient and textile floor-covering - Determination of side length, edge straightness and squareness of tiles and planks (ISO 24342:2024) | |
| Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles (ISO 24342:2018) | |
| Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles - Amendment 1 (ISO 24342:2007/Amd 1:2012) | |
| Resilient and textile floor-coverings - Determination of side length, edge, straightness and squareness of tiles (ISO 24342:2007) | |
| Resilient floor coverings - Determination of density (ISO 23996:2007) | |
| Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2008) | |
| Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2018) | |
| Resilient floor coverings - Determination of dimensional stability and curling after exposure to heat (ISO 23999:2021) | |
| Resilient floor coverings - Determination of flexibility and deflection (ISO 24344:2008) | |
| Resilient floor coverings - Determination of mass per unit area (ISO 23997:2007) | |
| Resilient floor coverings - Determination of overall thickness (ISO 24346:2006) | |
| Resilient floor coverings - Determination of peel resistance (ISO 24345:2006) | |
| Resilient floor coverings - Determination of thickness of layers (ISO 24340:2006) | |
| Resilient floor coverings - Specification for plain and decorative linoleum (ISO 24011:2009) | |
| RUBBER HOSE, TEXTILE-REINFORCED, FOR COMPRESSED AIR. SPECIFICATION. (ISO 2398:1995). | |
| Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2006) | |
| Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2016) | |
| Rubber hoses, textile-reinforced, for compressed air - Specification (ISO 2398:2024) | |
| RUBBER OR PLASTICS-COATED FABRICS. DETERMINATION OF COATING ADHESION. (ISO 2411:2000) | |
| Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2017) | |
| Rubber- or plastics-coated fabrics - Determination of coating adhesion (ISO 2411:2024) | |
| Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) | |
| Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2022) | |
| Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Shut-off devices for oil burners (ISO 23553-1:2007, including Cor 1:2009) | |
| Shaped insulating refractory products - Determination of permanent change in dimensions on heating (ISO 2477:2005) (Endorsed by Asociación Española de Normalización in June of 2025.) | |
| Sharps injury protection - Requirements and test methods - Part 1: Single-use sharps containers (ISO 23907-1:2019) | |
| Sharps injury protection - Requirements and test methods - Sharps containers (ISO 23907:2012) | |
| Sharps injury protection - Requirements and test methods - Sharps protection features for single-use hypodermic needles, introducers for catheters and needles used for blood sampling (ISO 23908:2011) | |
| Shot blasting machinery - Safety and environmental requirements (ISO 23779:2024) | |
| Simultaneous interpreting delivery platforms - Requirements and recommendations (ISO 24019:2022) | |
| Slotted headless screws with shank (ISO 2342:2003) | |
| Small craft - Electrical/electroni c control systems for steering, shift and throttle (Endorsed by Asociación Española de Normalización in May of 2026.) | |
| Small craft - Electrical/electroni c control systems for steering, shift and throttle (ISO 25197:2012) | |
| Small craft - Electrical/electroni c control systems for steering, shift and throttle (ISO 25197:2012, including Amd 1:2014) | |
| Small craft - Electrical/electroni c control systems for steering, shift and throttle (ISO 25197:2020) | |
| Small craft - Electrical/electroni c control systems for steering, shift and throttle - Amendment 1 (ISO 25197:2012/Amd 1:2014) | |
| Small craft - Electrical/electroni c control systems for steering, shift and throttle - Amendment 1 (ISO 25197:2020/Amd 1:2022) | |
| Small craft - Electrical/electroni c control systems for steering, shift and throttle | |
| Small craft - Lithium-ion batteries (ISO 23625:2025) (Endorsed by Asociación Española de Normalización in April of 2025.) | |
| Small craft - Steering wheels (ISO 23411:2020) | |
| Soil Quality - Determination of dehydrogenase activity in soil - Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2005) (Endorsed by AENOR in February of 2012.) | |
| Soil Quality - Determination of dehydrogenase activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2005) (Endorsed by AENOR in February of 2012.) | |
| Soil quality - Determination of dehydrogenases activity in soils - Part 1: Method using triphenyltetrazolium chloride (TTC) (ISO 23753-1:2019) (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Soil quality - Determination of dehydrogenases activity in soils - Part 1: Method using triphenyltetrazolium chloride (TTC) - Amendment 1 (ISO 23753-1:2019/Amd 1:2020) (Endorsed by Asociación Española de Normalización in... | |
| Soil quality - Determination of dehydrogenases activity in soils - Part 2: Method using iodotetrazolium chloride (INT) (ISO 23753-2:2019) (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Soil quality - Determination of dehydrogenases activity in soils - Part 2: Method using iodotetrazolium chloride (INT) - Amendment 1 (ISO 23753-2:2019/Amd 1:2020) (Endorsed by Asociación Española de Normalización in... | |
| Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution (ISO 23470:2007) (Endorsed by AENOR in February of 2012.) | |
| Soil quality - Determination of effective cation exchange capacity (CEC) and exchangeable cations using a hexamminecobalt trichloride solution (ISO 23470:2018) (Endorsed by Asociación Española de Normalización in November of 2018.)... | |
| Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO 23161:2009) (Endorsed by AENOR in February of 2012.) | |
| Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO 23161:2018) (Endorsed by Asociación Española de Normalización in January of 2019.) | |
| Soil quality - Field soil description (ISO 25177:2008) (Endorsed by AENOR in August of 2011.) | |
| Soil quality - Field soil description (ISO 25177:2019) (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Soil quality - In situ caging of snails to assess bioaccumulation of contaminants (ISO 24032:2021) (Endorsed by Asociación Española de Normalización in February of 2022.) | |
| Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and extraction of earthworms (ISO 23611-1:2018) (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and formalin extraction of earthworms (ISO 23611-1:2006) | |
| Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2006) (Endorsed by AENOR in August of 2011.) | |
| Soil quality - Sampling of soil invertebrates - Part 2: Sampling and extraction of micro-arthropods (Collembola and Acarina) (ISO 23611-2:2024) (Endorsed by Asociación Española de Normalización in June of 2024.)... | |
| Soil quality - Sampling of soil invertebrates - Part 3: Sampling and extraction of enchytraeids (ISO 23611-3:2019) (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Soil quality - Sampling of soil invertebrates - Part 3: Sampling and soil extraction of enchytraeids (ISO 23611-3:2007) (Endorsed by AENOR in August of 2011.) | |
| Soil quality - Sampling of soil invertebrates - Part 4: Sampling, extraction and identification of soil-inhabiting nematodes (ISO 23611-4:2007) (Endorsed by AENOR in August of 2011.) | |
| Soil quality - Sampling of soil invertebrates - Part 4: Sampling, extraction and identification of soil-inhabiting nematodes (ISO 23611-4:2022) (Endorsed by Asociación Española de Normalización in October of 2022.) | |
| Soil quality - Sampling of soil invertebrates - Part 5: Sampling and extraction of soil macro-invertebrates (ISO 23611-5:2011) (Endorsed by AENOR in April of 2013.) | |
| Soil quality - Sampling of soil invertebrates - Part 5: Sampling and extraction of soil macro-invertebrates (ISO 23611-5:2024) (Endorsed by Asociación Española de Normalización in October of 2024.) | |
| Soil quality - Sampling of soil invertebrates - Part 6: Guidance for the design of sampling programmes with soil invertebrates (ISO 23611-6:2012) (Endorsed by AENOR in September of 2013.) | |
| Soil quality - Test for measuring the inhibition of reproduction in oribatid mites (Oppia nitens) exposed to contaminants in soil (ISO 23266:2020) (Endorsed by Asociación Española de Normalización in May... | |
| Solar energy - Collector components and materials - Part 1: Evacuated tubes - Durability and performance (ISO 22975-1:2016) | |
| Solar energy - Collector components and materials - Part 2: Heat-pipes for solar thermal application - Durability and performance (ISO 22975-2:2016) | |
| Solar energy - Collector components and materials - Part 3: Absorber surface durability (ISO 22975-3:2014) | |
| Solar energy - Collector fields - Check of performance (ISO 24194:2022) (Endorsed by Asociación Española de Normalización in August of 2022.) | |
| Solar energy - Collector fields - Check of performance - Amendment 1 (ISO 24194:2022/Amd 1:2024) (Endorsed by Asociación Española de Normalización in May of 2024.) | |
| Solid biofuels - Determination of water sorption and its effect on durability of thermally treated biomass fuels - Part 1: Pellets (ISO 23343-1:2021) | |
| Solvents for paints and varnishes - Demineralized water for industrial applications - Specification and test methods (ISO 23321:2019) | |
| Specification of liquefied natural gas as a fuel for marine applications (ISO 23306:2020) | |
| Sports and recreational facilities - Trampoline parks - Safety requirements (ISO 23659:2022) | |
| Stationary source emissions - Automatic method for the determination of the methane concentration using flame ionisation detection (FID) (ISO 25140:2010) | |
| Stationary source emissions - Determination of PM10/PM2,5 mass concentration in flue gas - Measurement at low concentrations by use of impactors (ISO 23210:2009) | |
| Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO 25139:2011) | |
| Steel - Conversion of elongation values - Part 1: Carbon and low alloy steels (ISO 2566-1:1984) | |
| Steel - Conversion of elongation values - Part 1: Carbon and low-alloy steels (ISO 2566-1:2021, Corrected version 2022-06) | |
| Steel - Conversion of elongation values - Part 2: Austenitic steels (ISO 2566-2:1984) | |
| Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2018) | |
| Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices - Amendment 1 (ISO... | |
| Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 25424:2009) | |
| Systems and software engineering - Software product Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability: User requirements specification (ISO 25065:2019) | |
| Systems and software engineering - Systems and software Quality Requirements and Evaluation (SQuaRE) - Common Industry Format (CIF) for Usability - Evaluation Report (ISO/IEC 25066:2016) (Endorsed by Asociación Española de... | |
| Technical product documentation (TPD) - Classification of requirements - Part 1: Framework (ISO 24096-1:2024) (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| Technical product documentation (TPD) - Classification of requirements - Part 2: Classification based on severity and susceptibility (ISO 24096-2:2024) (Endorsed by Asociación Española de Normalización in November of 2024.) | |
| TEXTILE CONVEYOR BELTS - ADHESIVE STRENGTH BETWEEN CONSTITUTIVE ELEMENTS - PART 1: METHODS OF TEST (ISO 252-1:1999). | |
| Textile machinery - Guide to the design of textile machinery for reduction of the noise emissions (ISO 23771:2015) | |
| Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 1: Method of the horizontally folded specimen (ISO... | |
| Textiles - Determination of the recovery from creasing of a folded specimen of fabric by measuring the angle of recovery - Part 2: Method of the vertically folded specimen (ISO... | |
| Textiles - Determination of the snagging resistance of fabrics - Part 1: Mace (spiked ball) test method (ISO 25086-1:2026) (Endorsed by Asociación Española de Normalización in March of 2026.) | |
| Textiles - Knitted fabrics - Representation and pattern design (ISO 23606:2009) | |
| Textiles - Smart textiles - Test method for sheet resistance of conductive textiles using non-contact type (ISO 24584:2022) (Endorsed by Asociación Española de Normalización in August of 2022.) | |
| Thermal insulating products for industrial installations - Determination of the coefficient of linear thermal expansion at sub-ambient temperatures (ISO 23766:2022) | |
| Thermal insulation products for building equipment and industrial installations - Determination of design thermal conductivity (ISO 23993:2008, Corrected version 2009-10-01) | |
| Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2005) | |
| Thermoplastics pipes - Longitudinal reversion - Test method and parameters (ISO 2505:2023) | |
| Thermoplastics pipes and fittings - Vicat softening temperature - Part 1: General test method (ISO 2507-1:1995) | |
| Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact... | |
| Thermoplastics pipes and fittings - Vicat softening temperature - Part 3: Test conditions for acrylonitrile/butadi ene/styrene (ABS) and acrylonitrile/styren e/acrylic ester (ASA) pipes and fittings (ISO 2507-3:1995) | |
| Tips for assistive products for walking - Requirements and test methods - Part 1: Friction of tips (ISO 24415-1:2009) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development (ISO 25119-1:2018) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 1: General principles for design and development - Amendment 1 (ISO 25119-1:2018/Amd 1:2020) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 2: Concept phase (ISO 25119-2:2019) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software (ISO 25119-3:2018) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 3: Series development, hardware and software - Amendment 1 (ISO 25119-3:2018/Amd 1:2020) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes (ISO 25119-4:2018) | |
| Tractors and machinery for agriculture and forestry - Safety-related parts of control systems - Part 4: Production, operation, modification and supporting processes - Amendment 1 (ISO 25119-4:2018/Amd 1:2020) | |
| Vapour products - Determination of e-liquid vaporised mass and aerosol collected mass (ISO 24197:2022) | |
| Vapour products - Determination of nicotine in vapour product emissions - Gas chromatographic method (ISO 24199:2022) | |
| Vapour products - Determination of selected carbonyls in vapour product emissions (ISO 24211:2022) | |
| Waste collection and transportation management - Vocabulary (ISO 24161:2022) | |
| Water quality - Calculation of biological equivalence (BEQ) concentrations (ISO 23196:2022) | |
| Water quality - Determination of chromium(VI) - Method using flow analysis (FIA and CFA) and spectrometric detection (ISO 23913:2006) | |
| Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006) (Endorsed by... | |
| Water quality - Determination of dalapon, trichloroacetic acid and selected haloacetic acids - Method using gas chromatography (GC-ECD and/or GC-MS detection) after liquid-liquid extraction and derivatization (ISO 23631:2006) | |
| Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2013) | |
| Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO 2553:2019, Corrected version 2021-09) | |
| Welding consumables - Covered electrodes - Determination of the efficiency, metal recovery and deposition coefficient (ISO 2401:2018) | |
| Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2002) | |
| Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2009) | |
| Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification (ISO 2560:2020) | |
| Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2020) | |
| Welding consumables - Solid wire electrodes, solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO/FDIS 24034:2010) | |
| Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2012) | |
| Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode-flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2019) | |
| Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of creep-resisting steels - Classification (ISO 24598:2007) | |
| Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2008) | |
| Welding consumables - Solid wires and rods for fusion welding of copper and copper alloys - Classification (ISO 24373:2018) | |
| Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification (ISO 24034:2005) | |
| Welding consumables - Solid wires and rods for fusion welding of titanium and titanium alloys - Classification - Amendment 1 (ISO 24034:2005/Amd 1:2008) | |
| Workplace air - Chemical agent present as a mixture of airborne particles and vapour - Requirements for evaluation of measuring procedures using samplers (ISO 23861:2022) | |
| Workplace air - Gases and vapours - Requirements for evaluation of measuring procedures using diffusive samplers (ISO 23320:2022) |
| << Prev | Next >> |