AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
90
100
110
120
130
140
145
146
147
148
149
150
151
152
153
154
155
156
157
160
170
180
181
| Product Name | Notes |
|---|---|
| Acoustics - Determination of acoustic properties in impedance tubes - Part 2: Two-microphone technique for normal sound absorption coefficient and normal surface impedance (ISO 10534-2:2023, Corrected version 2025-08) | |
| Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 1: Method using standing wave ratio. (ISO 10534-1:1996) | |
| Acoustics - Determination of sound absorption coefficient and impedance in impedances tubes - Part 2: Transfer-function method. (ISO 10534-2:1998) | |
| Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2017) | |
| Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 2: Application to Type B elements when the... | |
| Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 3: Application to Type B elements when the... | |
| Acoustics - Laboratory and field measurement of flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 4: Application to junctions with at least one... | |
| Acoustics - Laboratory and field measurement of the flanking transmission for airborne, impact and building service equipment sound between adjoining rooms - Part 5: Radiation efficiencies of building elements (ISO... | |
| Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 1: Frame document (ISO 10848-1:2006) | |
| Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 2: Application to light elements when the junction has a small influence... | |
| Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 3: Application to light elements when the junction has a substantial influence... | |
| Acoustics - Laboratory measurement of the flanking transmission of airborne and impact sound between adjoining rooms - Part 4: Application to junctions with at least one heavy element (ISO 10848-4:2010)... | |
| Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1: Principles and guidelines (ISO 10846-1:2008) | |
| Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion... | |
| Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for... | |
| Acoustics and vibration - Laboratory measurement of vibro-acyustic transfer properties of resilient elements - Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion (ISO 10846-4:2003) | |
| ACOUSTICS AND VIBRATION. LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS. PART 1: PRINCIPLES AND GUIDELINES (ISO 10846-1:1997) | |
| ACOUSTICS AND VIBRATION. LABORATORY MEASUREMENT OF VIBRO-ACOUSTIC TRANSFER PROPERTIES OF RESILIENT ELEMENTS. PART 2: DYNAMIC STIFFNESS OF ELASTIC SUPPORTS FOR TRANSLATORY MOTION. DIRECT METHOD (ISO 10846-2:1997) | |
| Acoustics and vibration. Laboratory measurements of vibro-acoustic transfer properties of resilient elements. Part 3: Indirect method for determination of the dynamic stiffness of resilient supports for translatory motion. (ISO 10846-3:2002)... | |
| ADHESIVES. DETERMINATION OF TORQUE STRENGTH OF ANAEROBIC ADHESIVES ON THREADED FASTENERS. (ISO 10964:1993). | |
| Animal and vegetable fats and oils. Determination on alkalinity. (ISO 10539:2002) | |
| Assistive products - Hoists for the transfer of persons - Requirements and test methods (ISO 10535:2021, Corrected version 2023-08) | |
| Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity (ISO 10993-10:2002, including Amd 1:2006) | |
| Biological evaluation of medical devices - Part 10: Tests for irritation and delayed-type hypersensitivity - Amendment 1 (ISO 10993-10:2002/Amd 1:2006) | |
| Biological evaluation of medical devices - Part 10: Tests for irritation and skin sensitization (ISO 10993-10:2010) | |
| Biological evaluation of medical devices - Part 10: Tests for skin sensitization (ISO 10993-10:2021) | |
| Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2006) | |
| Biological evaluation of medical devices. Part 10: Tests for irritation and delayed-type hypersensitivity. (ISO 10993-10:2002) | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 10: TESTS FOR IRRITATION AND SENSIBILIZATION. (ISO 10993-10:1995). | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 11: TESTS FOR SYSTEMIC TOXICITY. (ISO 10993-11:1993). | |
| Building and civil engineering sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2021) | |
| Building and civil engineering sealants - Determination of change in mass and volume (ISO 10563:2023) | |
| Building construction - Sealants - Determination of adhesion/cohesion properties of sealants after immersion in water (ISO 10591:2005) | |
| Building construction - Sealants - Determination of change in mass and volume (ISO 10563:2005) | |
| Building construction - Sealants - Determination of tensile properties of sealants at maintained extension after immersion in water (ISO 10590:2005) | |
| BUILDING CONSTRUCTION. SEALANTS FOR JOINTS. DETERMINATION OF CHANGE IN MASS AND VOLUME. (ISO 10563:1991). | |
| BUILDING CONSTRUCTION. SEALANTS. DETERMINATION OF ADHESION/COHESION PROPERTIES AT MAINTAINED EXTENSION AFTER IMMERSION IN WATER. (ISO 10590:1991). | |
| Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007) | |
| Building materials and products. Procedures for determining declared and design thermal values. (ISO 10456:1999) | |
| Buildings and civil engineering works - Sealants - Determination of change in mass and volume (ISO 10563:2017) | |
| Carbon fibre - Determination of size content (ISO 10548:2002) | |
| Carbon fibre - Determination of size content (ISO 10548:2002/Cor 1:2008) | |
| Carbon fibre - Determination of tensile properties of resin-impregnated yarn (ISO 10618:2004) | |
| CARBON FIBRE - DETERMINATION OF TENSILE PROPERTIES OF RESIN-IMPREGNATED YARNS. (ISO 10618:1999) | |
| CARBON FIBRE. DETERMINATION OF SIZE CONTENT (ISO 10548:1994). | |
| Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:1995) | |
| Ceramic tiles - Part 10: Determination of moisture expansion (ISO 10545-10:2021, Corrected version 2021-09) | |
| Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:1995) | |
| Ceramic tiles - Part 13: Determination of chemical resistance (ISO 10545-13:2016) | |
| Ceramic tiles - Part 14: Determination of resistance to stains (ISO 10545-14:2015) | |
| Ceramic tiles - Part 15: Determination of lead and cadmium given off by glazed tiles (ISO 10545-15:1995) | |
| Ceramic tiles - Part 15: Determination of lead and cadmium given off by tiles (ISO 10545-15:2021) | |
| Ceramic tiles - Part 16: Determination of small colour differences (ISO 10545-16:2010) | |
| Ceramic tiles - Part 16: Determination of small colour differences. (ISO 10545-16:1999) | |
| Ceramic tiles - Part 18: Determination of Light Reflectance Value (LRV) (ISO 10545-18:2022) | |
| Ceramic tiles - Part 1: Sampling and basis for acceptance (ISO 10545-1:2014) | |
| Ceramic tiles - Part 20: Determination of deflection of ceramic tiles for calculating their radius of curvature (ISO 10545-20:2022) | |
| Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:1995, including Technical Corrigendum 1:1997) | |
| Ceramic tiles - Part 2: Determination of dimensions and surface quality (ISO 10545-2:2018) | |
| Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:1995, including Technical Corrigendum 1:1997) | |
| Ceramic tiles - Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density (ISO 10545-3:2018) | |
| Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2004) | |
| Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2014) | |
| Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019) | |
| Ceramic tiles - Part 6: Determination of resistance to deep abrasion for unglazed tiles (ISO 10545-6:2010) | |
| CERAMIC TILES - PART 7: DETERMINATION OF RESISTANCE TO SURFACE ABRASION FOR GLAZED TILES (ISO 10545-7:1996) | |
| Ceramic tiles - Part 8: Determination of linear thermal expansion (ISO 10545-8:2014) | |
| Ceramic tiles - Part 9: Determination of resistance to thermal shock (ISO 10545-9:2013) | |
| CERAMIC TILES. PART 11: DETERMINATION OF CRAZING RESISTANCE FOR GLAZED TILES. (ISO 10545-11:1994). | |
| CERAMIC TILES. PART 12: DETERMINATION OF FROST RESISTANCE (ISO 10545-12:1995), INCLUDING TECHNICAL CORRIGENDUM 1:1997). | |
| CERAMIC TILES. PART 14: DETERMINATION OF RESISTANCE TO STAINS. (ISO 10545-14:1995, INCLUDING TECHNICAL CORRIGENDUM 1:1997). | |
| CERAMIC TILES. PART 1: SAMPLING AND BASIS FOR ACCEPTANCE. (ISO 10545-1:1995). | |
| CERAMIC TILES. PART 2: DETERMINATION OF DIMENSIONS AND SURFACE QUALITY. (ISO 10545-2:1995, INCLUDING TECHNICAL CORRIGENDUM 1:1997). | |
| CERAMIC TILES. PART 4: DETERMINATION OF MODULUS OF RUPTURE AND BREAKING STRENGTH. (ISO 10545-4:1994). | |
| CERAMIC TILES. PART 5: DETERMINATION OF IMPACT RESISTANCE BY MEASUREMENT OF COEFFICIENT OF RESTITUTION (ISO 10545-5:1996, INCLUDING TECHNICAL CORRIGENDUM 1:1996). | |
| CERAMIC TILES. PART 6: DETERMINATION OF RESISTANCE TO DEEP ABRASION FOR UNGLAZED TILES. (ISO 10545-6:1995). | |
| CERAMIC TILES. PART 8: DETERMINATION OF LINEAR THERMAL EXPANSION. (ISO 10545-8:1994). | |
| CERAMIC TILES. PART 9: DETERMINATION OF RESISTANCE TO THERMAL SHOCK. (ISO 10545-9:1994). | |
| Clay geosynthetic barriers - Determination of permeability to gases (ISO 10773:2011) | |
| Clay geosynthetic barriers - Determination of water absorption of bentonite (ISO 10769:2011) | |
| Cone proof load test on nuts (ISO 10485:1991) | |
| Dental equipment - High- and medium-volume suction systems. (ISO 10637:1999) | |
| Dental implant systems. Contents of technical file. (ISO 10451:2002) | |
| Dentistry - Central suction source equipment (ISO 10637:2018) (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Dentistry - Contents of a technical file for dental implant systems (ISO 10451:2026) (Endorsed by Asociación Española de Normalización in May of 2026.) | |
| Dentistry - Contents of technical file for dental implant systems (ISO 10451:2010) | |
| Dentistry - Denture adhesives (ISO 10873:2010) (Endorsed by AENOR in October of 2010.) | |
| Dentistry - Denture adhesives (ISO 10873:2021) (Endorsed by Asociación Española de Normalización in September of 2021.) | |
| Dentistry - Polymer-based crown and bridge materials (ISO 10477:2004) | |
| Dentistry - Polymer-based crown and veneering materials (ISO 10477:2018) | |
| Dentistry - Polymer-based crown and veneering materials (ISO 10477:2020) | |
| Dentistry - Powered polymerization activators (ISO 10650:2015) | |
| Dentistry - Powered polymerization activators (ISO 10650:2018) | |
| Dentistry - Powered polymerization activators - Part 1: Quartz tungsten halogen lamps (ISO 10650-1:2004) | |
| Dentistry - Powered polymerization activators - Part 2: Light-emitting diode (LED) lamps (ISO 10650-2:2007) | |
| DENTISTRY. POLYMER BASED CROWN AND BRIDGE MATERIALS. (ISO 10477:1992). | |
| DENTISTRY. POLYMER-BASED CROWN AND BRIDGE MATERIALS. (ISO 10477:1992/AM1:1998) | |
| Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO 10628-1:2014) (Endorsed by AENOR in February of 2015.) | |
| Diagrams for the chemical and petrochemical industry - Part 2: Graphical symbols (ISO 10628-2:2012) (Endorsed by AENOR in February of 2013.) | |
| DRILLING SCREWS WITH TAPPING SCREW THREAD - MECHANICAL AND FUNCTIONAL PROPERTIES (ISO 10666:1999) | |
| Electronic Health Record-System Functional Model, Release 1.1 (ISO 10781:2009) (Endorsed by AENOR in January of 2010.) | |
| Ergonomics of the physical environment - Subjective judgement scales for assessing physical environments (ISO 10551:2019) (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Ergonomics of the thermal environment - Assessment of the influence of the thermal environment using subjective judgement scales. (ISO 10551:1995) | |
| Fasteners - Hexagon socket countersunk head screws with reduced loadability (ISO 10642:2019) | |
| Fasteners - Hot dip galvanized coatings (ISO 10684:2004) (Endorsed by AENOR in August of 2006.) | |
| Fasteners - Hot dip galvanized coatings (ISO 10684:2004) | |
| Fasteners - Hot dip galvanized coatings (ISO 10684:2004/Cor 1:2008) | |
| Fasteners - Non-electrolytically applied zinc flake coating systems (ISO 10683:2018) | |
| Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) | |
| Fasteners - Prevailing torque hexagon nuts - High nuts (all metal), with fine pitch thread (ISO 10513:2025) | |
| Fasteners - Prevailing torque hexagon nuts - Regular nuts (with non-metallic insert), with fine pitch thread (ISO 10512:2025) | |
| Fasteners - Prevailing torque hexagon nuts - Thin nuts (with non-metallic insert) (ISO 10511:2025) | |
| Fastners. Non-electrolytically applied zinc flake coatings. (ISO 10683:2000). | |
| Fibre ropes of polyester/polyolefin dual fibres (ISO 10556:2009) | |
| Flow diagrams for process plants - General rules. (ISO 10628:1997) | |
| Footwear - Test method for slide fasteners - Attachment strength of end stops (ISO 10750:2015) | |
| Footwear - Test method for slide fasteners - Burst strength (ISO 10717:2010) | |
| Footwear - Test method for slide fasteners - Slider locking strength (ISO 10748:2011) | |
| Footwear - Test method for slide fasteners - Strength of slide fastener pullers (ISO 10734:2016) | |
| Footwear - Test method for the characterization of elastic materials - Tensile performance (ISO 10765:2010) | |
| Footwear - Test method for the determination of the resistance of elastic materials for footwear to repeated extension - Fatigue resistance (ISO 10768:2010) | |
| Footwear - Test methods for slide fasteners - Lateral strength (ISO 10764:2016) | |
| Footwear - Test methods for slide fasteners - Resistance to repeated opening and closing (ISO 10751:2016) | |
| Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance (ISO 10462:2013) | |
| Gas cylinders - Acetylene cylinders - Periodic inspection and maintenance - Amendment 1 (ISO 10462:2013/Amd 1:2019) | |
| Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2010) | |
| Gas cylinders - Cylinder bundles - Design, manufacture, testing and inspection (ISO 10961:2019) | |
| Gas cylinders - Gas cylinder valve connections for use in the microelectronics industry - Part 1: Outlet connections. (ISO 10692-1:2001) | |
| Gas cylinders - Welded aluminium-alloy, carbon and stainless steel gas cylinders - Periodic inspection and testing (ISO 10460:2018) | |
| Gas cylinders- Gas cylinder valve connections for use in the microelectronecs industry - Part 2 : Specification and type testing for valve to cylinder connections. (ISO 10692-2:2001) | |
| Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) (Endorsed by AENOR in January of 2015.) | |
| Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) | |
| Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (ISO 10722:2007) | |
| Geosynthetics - Index test procedure for the evaluation of mechanical damage under repeated loading - Damage caused by granular material (laboratory test method) (ISO 10722:2019) | |
| Geotextiles - Test method for the determination of the filtration behaviour of geotextiles under turbulent water flow conditions (ISO 10772:2012) | |
| Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012) | |
| Glass-reinforced thermosetting plastics (GRP) pipes - Determination of the ring creep properties under wet or dry conditions (ISO 10468:2023) | |
| Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2011) | |
| Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO 10882-1:2024) | |
| Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 2: Sampling of gases (ISO 10882-2:2024) | |
| Health and safety in welding and allied processes. Sampling of airbone particles and gases in the operator's breathing zone. Part 2: Samplling of gases. (ISO 10882-2:2000). | |
| Health and safety in welding and allied processes. Sampling of airborne particles and gases in the operator's breathing zone. Part 1: Sampling of airborne particles. (ISO 10882-1:2001) | |
| Health Informatics - HL7 Electronic Health Records-System Functional Model, Release 2 (EHR FM) (ISO 10781:2015) (Endorsed by AENOR in October of 2015.) | |
| Health Informatics - HL7 Electronic Health Records-System Functional Model, Release 2.1 (EHR FM) (ISO 10781:2023) (Endorsed by Asociación Española de Normalización in September of 2025.) | |
| HEXAGON SOCKET COUNTERSUNK HEAD SCREWS (ISO 10642:1997). | |
| Hexagon socket countersunk head screws (ISO 10642:2004) | |
| Hexagon socket countersunk head screws (ISO 10642:2004/Amd 1:2012) | |
| HEXALOBULAR INTERNAL DRIVING FEATURE FOR BOLTS AND SCREWS (ISO 10664:1999) | |
| Hexalobular internal driving feature for bolts and screws (ISO 10664:2005) | |
| Hexalobular internal driving feature for bolts and screws (ISO 10664:2014) | |
| Hoists for the transfer of disabled persons - Requirements and test methods (ISO 10535:2006) | |
| HOISTS FOR THE TRANSFER OF DISABLED PERSONS. REQUIREMENTS AND TEST METHODS (ISO 10535:1998) | |
| IDENTIFICATION CARDS. CONTACTLESS INTEGRATED CIRCUIT(S) CARDS. PART 1: PHYSICAL CHARACTERISTICS. (ISO/IEC 10536-1:1992). | |
| Industrial sewing machines - Safety requirements for sewing machines, units and systems (ISO 10821:2005) (Endorsed by AENOR in September of 2005.) | |
| Industrial sewing machines - Safety requirements for sewing machines, units and systems - Amendment 1 (ISO 10821:2005/Amd 1:2009, Corrected version 2009-08-01) (Endorsed by AENOR in April of 2009.) | |
| Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO 10555-1:2013, Corrected version 2013-07-01) | |
| Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO 10555-1:2023) | |
| Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements - Amendment 1 (ISO 10555-1:2013/Amd 1:2017) | |
| Intravascular catheters - Sterile and single-use catheters - Part 3: Central venous catheters (ISO 10555-3:2013) | |
| Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:2013) | |
| Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO 10555-4:2023) | |
| Intravascular catheters - Sterile and single-use catheters - Part 5: Over-needle peripheral catheters (ISO 10555-5:2013) | |
| Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports (ISO 10555-6:2015) | |
| Intravascular catheters - Sterile and single-use catheters - Part 6: Subcutaneous implanted ports - Amendment 1 (ISO 10555-6:2015/Amd 1:2019) | |
| Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators (ISO 10651-4:2002) | |
| Lung ventilators - Part 4: Particular requirements for operator-powered resuscitators. (ISO 10651-4:2002) | |
| Lung ventilators - Part 4: Particular requirements for user-powered resuscitators (ISO 10651-4:2023) | |
| Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 2: Home care ventilators for ventilator-dependent patients (ISO 10651-2:2004) | |
| Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 5: Gas-powered emergency resuscitators (ISO 10651-5:2006) | |
| Lung ventilators for medical use - Particular requirements for basic safety and essential performance - Part 6: Home-care ventilatory support devices (ISO 10651-6:2004) | |
| Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO 10819:2013) | |
| Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 1 (ISO 10819:2013/Amd 1:2019) | |
| Mechanical vibration and shock - Hand-arm vibration - Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand - Amendment 2 (ISO 10819:2013/Amd 2:2021) | |
| MECHANICAL VIBRATION AND SHOCK. HAND-ARM VIBRATION. METHOD FOR THE MEASUREMNT AND EVALUATION OF THE VIBRATION TRANSMISSIBILITY OF GLOVES AT THE PALM OF THE HAND (ISO 10819:1996). | |
| Micaceous iron oxide pigments for paints - Specifications and test methods (ISO 10601:2007) | |
| Micro process engineering - Vocabulary (ISO 10991:2009) | |
| Microfluidics - Vocabulary (ISO 10991:2023) (Endorsed by Asociación Española de Normalización in November of 2023.) | |
| Mixed polyolefin fibre ropes (ISO 10572:2009) | |
| Nanotechnologies - Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing (ISO 10808:2010) (Endorsed by AENOR in February of 2011.) | |
| Nanotechnologies - Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensa tion method (ISO 10801:2010) (Endorsed by AENOR in February of 2011.) | |
| NATIVE STARCH. DETERMINATION OF STARCH CONTENT. EWERS POLARIMETRIC METHOD (ISO 10520:1997) | |
| Natural gas - Gas sampling (ISO 10715:2022) | |
| Natural gas - Performance evaluation for analytical systems (ISO 10723:2012) | |
| Natural gas - Performance evaluation for on-line analytical systems. (ISO 10723:1995, including Technical Corrigendum 1:1998) | |
| Natural gas - Sampling guidelines. (ISO 10715:1997) | |
| Non-destructive testing of steel tubes - Part 10: Automated full peripheral ultrasonic testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of longitudinal and/or transverse imperfections... | |
| Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections (ISO 10893-11:2011) | |
| Non-destructive testing of steel tubes - Part 11: Automated ultrasonic testing of the weld seam of welded steel tubes for the detection of longitudinal and/or transverse imperfections - Amendment 1:... | |
| Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes (ISO 10893-12:2011) | |
| Non-destructive testing of steel tubes - Part 12: Automated full peripheral ultrasonic thickness testing of seamless and welded (except submerged arc-welded) steel tubes - Amendment 1: Change of acceptance criteria... | |
| Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness (ISO 10893-1:2011) | |
| Non-destructive testing of steel tubes - Part 1: Automated electromagnetic testing of seamless and welded (except submerged arc-welded) steel tubes for the verification of hydraulic leaktightness - Amendment 1: Change... | |
| Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections (ISO 10893-2:2011) | |
| Non-destructive testing of steel tubes - Part 2: Automated eddy current testing of seamless and welded (except submerged arc-welded) steel tubes for the detection of imperfections - Amendment 1: Change... | |
| Non-destructive testing of steel tubes - Part 3: Automated full peripheral flux leakage testing of seamless and welded (except submerged arc-welded) ferromagnetic steel tubes for the detection of longitudinal and/or... | |
| Non-destructive testing of steel tubes - Part 4: Liquid penetrant inspection of seamless and welded steel tubes for the detection of surface imperfections (ISO 10893-4:2011) | |
| Non-destructive testing of steel tubes - Part 5: Magnetic particle inspection of seamless and welded ferromagnetic steel tubes for the detection of surface imperfections (ISO 10893-5:2011) | |
| Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2011) | |
| Non-destructive testing of steel tubes - Part 6: Radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-6:2019) | |
| Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2011) | |
| Non-destructive testing of steel tubes - Part 7: Digital radiographic testing of the weld seam of welded steel tubes for the detection of imperfections (ISO 10893-7:2019) | |
| Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections (ISO 10893-8:2011) | |
| Non-destructive testing of steel tubes - Part 8: Automated ultrasonic testing of seamless and welded steel tubes for the detection of laminar imperfections - Amendment 1: Change acceptance criteria (ISO... | |
| Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes (ISO 10893-9:2011) | |
| Non-destructive testing of steel tubes - Part 9: Automated ultrasonic testing for the detection of laminar imperfections in strip/plate used for the manufacture of welded steel tubes - Amendment 1:... | |
| Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2008) | |
| Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2016) | |
| Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 1: Steel, nickel, titanium and their alloys (ISO 10675-1:2021) | |
| Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2010) | |
| Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2017) | |
| Non-destructive testing of welds - Acceptance levels for radiographic testing - Part 2: Aluminium and its alloys (ISO 10675-2:2021, Corrected version 2022-02) | |
| Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2011) | |
| Non-destructive testing of welds - Ultrasonic testing - Use of time-of-flight diffraction technique (TOFD) (ISO 10863:2020) | |
| Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2018) (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Offshore containers and associated lifting sets - Part 1: Design, manufacture and marking of offshore containers (ISO 10855-1:2024) (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2018) (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Offshore containers and associated lifting sets - Part 2: Design, manufacture and marking of lifting sets (ISO 10855-2:2024) (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2018) (Endorsed by Asociación Española de Normalización in August of 2018.) | |
| Offshore containers and associated lifting sets - Part 3: Periodic inspection, examination and testing (ISO 10855-3:2024) (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| OILSEEDS - SIMULTANEOUS DETERMINATION OF OIL AND WATER CONTENTS - METHOD USING PULSED NUCLEAR MAGNETIC RESONANCE SPECTROMETRY. (ISO 10565:1998) | |
| OILSEEDS. SIMULTANEOUS DETERMINATION OF OIL AND MOISTURE CONTENTS. METHOD USING PULSED NUCLEAR MAGNETIC RESONANCE SPECTROMETRY. (ISO 10565:1993). | |
| Ophthalmic instruments - Chart projectors (ISO 10938:1998) | |
| Ophthalmic instruments - Direct ophthalmoscopes (ISO 10942:2006) | |
| Ophthalmic instruments - Direct ophthalmoscopes (ISO 10942:2022) | |
| Ophthalmic instruments - Fundus cameras (ISO 10940:2009) | |
| Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2006) | |
| Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2011) | |
| Ophthalmic instruments - Indirect ophthalmoscopes (ISO 10943:2023) | |
| Ophthalmic instruments - Slit-lamp microscopes (ISO 10939:2007) | |
| Ophthalmic instruments - Slit-lamp microscopes (ISO 10939:2017) | |
| Ophthalmic instruments - Synoptophores (ISO 10944:2009) | |
| OPHTHALMIC INSTRUMENTS. DIRECT OPHTHALMOSCOPES. (ISO 10942:1998). | |
| OPHTHALMIC INSTRUMENTS. FUNDUS CAMERAS. (ISO 10940:1998). | |
| OPHTHALMIC INSTRUMENTS. INDIRECT OPHTHALMOSCOPES. (ISO 10943:1998). | |
| OPHTHALMIC INSTRUMENTS. SLIT-LAMP MICROSCOPES (ISO 10939:1998) | |
| OPHTHALMIC INSTRUMENTS. SYNOPTOPHORES. (ISO 10944:1998). | |
| Ophthalmic optics - Chart displays for visual acuity measurement - Printed, projected and electronic (ISO 10938:2016) | |
| Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 1: Product identification and electronic catalogue product hierarchy (ISO 10685-1:2011) | |
| Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2012) | |
| Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 2: Commercial information (ISO 10685-2:2016, Corrected version 2016-05-15) | |
| Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 3: Technical information (ISO 10685-3:2012) | |
| Paints and varnishes - Modelling of biocide release rate from antifouling paints by mass-balance calculation (ISO 10890:2010) | |
| Pipework - Fittings for corrugated metallic hoses (ISO 10806:2003) | |
| PIPEWORK. CORRUGATED FLEXIBLE METALLIC HOSE ASSEMBLIES FOR THE PROTECTION OF ELECTRICAL CABLES IN EXPLOSIVE ATMOSPHERES. (ISO 10807:1994). | |
| Plain washers for screw and washer assemblies. Small, normal and large series. Product grade A (ISO 10673:2009) | |
| PLAIN WASHERS FOR SCREW AND WASHER ASSEMBLIES. SMALL, NORMAL AND LARGE SERIES. PRODUCT GRADE A. (ISO 10673:1998). | |
| PLAIN WASHERS FOR TAPPING SCREW AND WASHER ASSEMBLIES - NORMAL AND LARGE SERIES. PRODUCT GRADE A (ISO 10669:1999) | |
| Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionizatio n time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2011) | |
| Plastics - Determination of the molecular mass and molecular mass distribution of polymer species by matrix-assisted laser desorption/ionizatio n time-of-flight mass spectrometry (MALDI-TOF-MS) (ISO 10927:2018) | |
| PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - PART 1: DESIGNATION SYSTEM AND BASIS FOR SPECIFICATIONS (ISO 1060-1:1998) | |
| PLASTICS - HOMOPOLYMER AND COPOLYMER RESINS OF VINYL CHLORIDE - PART 2: PREPARATION OF TEST SAMPLES AND DETERMINATION OF PROPERTIES (ISO 1060-2:1998) | |
| Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 1: General principles and moulding of multipurpose test specimens. (ISO 10724-1:1998) | |
| Plastics - Injection moulding of test specimens of thermosetting powder moulding compounds (PMCs) - Part 2: Small plates. (ISO 10724-2:1998) | |
| PLASTICS - UNPLASTICIZED CELLULOSE ACETATE - DETERMINATION OF FREE ACIDITY (ISO 1061:1990) | |
| Plastics piping systems - Glass-reinforced thermosetting plastics (GRP) pipes and fittings - Methods for regression analysis and their use (ISO 10928:2024) | |
| Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005) (Endorsed by AENOR in August of 2006.) | |
| Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005) | |
| Plastics piping systems for industrial applications - Poly(vinylidene fluoride) (PVDF) - Specifications for components and the system (ISO 10931:2005/Amd 1:2015) | |
| Polyamide fibre ropes - Double braid construction (ISO 10554:2009) | |
| Polyester fibre ropes - Double braid construction (ISO 10547:2009) | |
| Powered hand-held hedge trimmers - Safety (ISO 10517:2009) | |
| Powered hand-held hedge trimmers - Safety (ISO 10517:2009/Amd 1:2013) | |
| Powered hand-held hedge trimmers - Safety (ISO 10517:2019) | |
| Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2006) | |
| Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO 10524-1:2018) | |
| Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices - Amendment 1 (ISO 10524-1:2018/Amd 1:2023) | |
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005) (Endorsed by AENOR in October of 2006.) | |
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2005) | |
| Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO 10524-2:2018) | |
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005) (Endorsed by AENOR in October of 2006.) | |
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005) | |
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO 10524-3:2019) | |
| Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer (ISO 10524-3:2005/Amd... | |
| Pressure regulators for use with medical gases - Part 4: Low-pressure regulators (ISO 10524-4:2008) | |
| Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012) | |
| PREVAILING TORQUE TYPE ALL-METAL HEXAGON NUTS, STYLE 2, WITH METRIC FINE PITCH THREAD. PROPERTY CLASSES 8, 10 AND 12. (ISO 10513:1997). | |
| PREVAILING TORQUE TYPE HEXAGON NUTS (WITH NON-METALLIC INSERT), STYLE 1, WITH METRIC FINE PITCH THREAD. PROPERTY CLASSES 6, 8 AND 10. (ISO 10512:1997). | |
| Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012) | |
| Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012) | |
| PREVAILING TORQUE TYPE HEXAGON THIN NUTS (WITH NON-METALLIC INSERT). (ISO 10511:1997). | |
| Rapeseed - Determination of chlorophyll content - Spectrometric method (ISO 10519:2015) | |
| Rapeseed - Determination of chlorophyll content - Spectrometric method - Amendment 1: Preparation of the calibration curve to determine the k factor (ISO 10519:2015/Amd 1:2025) | |
| Rapeseed. Determination of chlorophyll content. Spectrometric method. (ISO 10519:1997). | |
| Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10582:2017) | |
| Resilient floor coverings - Heterogeneous poly(vinyl chloride) floor coverings - Specification (ISO 10582:2010) | |
| Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2011) | |
| Resilient floor coverings - Homogeneous poly(vinyl chloride) floor covering - Specifications (ISO 10581:2019) | |
| Resilient floor coverings - Semi-flexible/vinylc omposition (VCT) poly(vinyl chloride) floor tiles - Specification (ISO 10595:2010) | |
| Resilient, textile and laminate floor coverings - Classification (ISO 10874:2009) | |
| Resilient, textile and laminate floor coverings - Classification - Amendment 1: Elimination of class 22+ (ISO 10874:2009/Amd 1:2020) | |
| Resilient, textile and laminate floor coverings - Test method for volatile organic compound (VOC) emissions (ISO 10580:2010) | |
| Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2015) | |
| Resistance welding - Testing of welds - Peel and chisel testing of resistance spot and projection welds (ISO 10447:2022) | |
| Resistance welding equipment - Electrode taper fits for spot welding equipment - Dimensions (ISO 1089:2023) | |
| Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016, Corrected version 2016-08) | |
| Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:1994) | |
| Rubber and plastics hoses - Assessment of ozone resistance under dynamic conditions (ISO 10960:2017) | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2011) | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 1: Bending tests at ambient temperature (ISO 10619-1:2017) | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2011) | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2017) | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 2: Bending tests at sub-ambient temperatures (ISO 10619-2:2021) | |
| Rubber and plastics hoses and tubing - Measurement of flexibility and stiffness - Part 3: Bending tests at high and low temperatures (ISO 10619-3:2011) | |
| Safety requirements for industrial laundry machinery - Part 1: Common requirements (ISO 10472-1:1997) | |
| Safety requirements for industrial laundry machinery - Part 2: Washing machines and washer-extractors (ISO 10472-2:1997) | |
| Safety requirements for industrial laundry machinery - Part 3: Washing tunnel lines including component machines (ISO 10472-3:1997) | |
| Safety requirements for industrial laundry machinery - Part 4: Air dryers (ISO 10472-4:1997) | |
| Safety requirements for industrial laundry machinery - Part 5: Flatwork ironers, feeders and folders (ISO 10472-5:1997) | |
| Safety requirements for industrial laundry machinery - Part 6: Ironing and fusing presses (ISO 10472-6:1997) | |
| SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY. PART 1: COMMON REQUIREMENTS. (ISO 10472-1:1997). | |
| SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY. PART 2: WASHING MACHINES AND WASHER-EXTRACTORS. (ISO 10472-2:1997). | |
| SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY. PART 3: WASHING TUNNEL LINES INCLUDING COMPONENT MACHINES. (ISO 10472-3:1997). | |
| SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY. PART 4: AIR DRYERS. (ISO 10472-4:1997). | |
| SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY. PART 5: FLATWORK IRONERS, FEEDERS AND FOLDERS. (ISO 10472-5:1997). | |
| SAFETY REQUIREMENTS FOR INDUSTRIAL LAUNDRY MACHINERY. PART 6: IRONING AND FUSING PRESSES. (ISO 10472-6:1997). | |
| Screw and washer assemblies made of steel with plain washers - Washer hardness classes 200 HV and 300 HV (ISO 10644:2009) | |
| SCREW AND WASHER ASSEMLIES WITH PLAIN WASHERS. PART 1: WASHER HARDNESS CLASSES 200 HV AND 300 HV. (ISO 10644:1998). | |
| Small craft - Hydraulic steering systems (ISO 10592:1994) | |
| Small craft - Quick release system for trapeze harness (ISO 10862:2009) | |
| Small craft - Remote hydraulic steering systems (ISO 10592:2022) | |
| Soil quality - Determination of carbonate content - Volumetric method (ISO 10693:1995) (Endorsed by AENOR in May of 2014.) | |
| Soil quality - Measurement of the stability of soil aggregates subjected to the action of water (ISO 10930:2012) (Endorsed by AENOR in April of 2013.) | |
| Soldering and brazing materials - Methods for the sampling of soft solders for analysis (ISO 10564:1993) | |
| Starch derivatives - Determination of the composition of glucose syrups, fructose syrups and hydrogenated glucose syrups - Method using high-performance liquid chromatography (ISO 10504:2013) | |
| STARCH DERIVATIVES. DETERMINATION OF THE COMPOSITION OF GLUCOSE SYRUPS, FRUCTOSE SYRUPS AND HYDROGENATED GLUCOSE SYRUPS. METHOD USING HIGH-PERFORMANCE LIQUID CHROMATOGRAPHY. (ISO 10504:1998) | |
| Steel and iron - Determination of nitrogen content - Thermal conductimetric method after fusion in a current of inert gas (ISO 10720:1997) | |
| Steel and iron - Determination of phophorus content - Phosphovanadomolybda te spectrophotometric method (ISO 10714:1992) | |
| Steel and iron - Determination of phosphorus content - Phosphovanadomolybda te spectrophotometric method (ISO 10714:2024) | |
| STEEL AND IRON. DETERMINATION OF MANGANESE CONTENT. FLAME ATOMIC ABSORPTION SPECTROMETRIC METHOD. (ISO 10700:1994). | |
| Sterile, single-use intravascular catheters - Part 1: General requirements (ISO 10555-1:1995, including Amd 1:1999 and Amd 2:2004) | |
| Sterile, single-use intravascular catheters - Part 1: General requirements (ISO 10555-1:1996/AM 2:2004) | |
| Sterile, single-use intravascular catheters - Part 3: Central venous catheters. (ISO 10555-3:1996/Cor.1:2 002) | |
| STERILE, SINGLE-USE INTRAVASCULAR CATHETERS. PART 1: GENERAL REQUIREMENTS (ISO 10555-1:1996/AM1:199 9) | |
| STERILE, SINGLE-USE INTRAVASCULAR CATHETERS. PART 1: GENERAL REQUIREMENTS. (ISO 10555-1:1995). | |
| STERILE, SINGLE-USE INTRAVASCULAR CATHETERS. PART 2: ANGIOGRAPHIC CATHETERS. (ISO 10555-2:1996). | |
| STERILE, SINGLE-USE INTRAVASCULAR CATHETERS. PART 3: CENTRAL VENOUS CATHETERS (ISO 10555-3:1996). | |
| STERILE, SINGLE-USE INTRAVASCULAR CATHETERS. PART 4: BALLOON DILATATION CATHETERS. (ISO 10555-4:1996). | |
| STERILE, SINGLE-USE INTRAVASCULAR CATHETERS. PART 5: OVER-NEEDLE PERIPHERAL CATHETERS. (ISO 10555-5:1996). | |
| Sterile, single-use intravascular catheters. Part 5: Over-needle peripheral catheters. (ISO 10555-5:1996/AM:1999 ) | |
| TAPPING SCREW AND WASHER ASSEMBLIES WITH PLAIN WASHERS (ISO 10510:1999) | |
| Tapping screw and washer assemblies with plain washers (ISO 10510:2011) | |
| Testing of valves - Fire type-testing requirements (ISO 10497:2010) | |
| Testing of valves - Fire type-testing requirements (ISO 10497:2022) | |
| Testing of valves. Fire type-testing requirements. (ISO 10497:2004) | |
| Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test (ISO 10833:2017) | |
| Textile floor coverings - Determination of resistance to damage at cut edges using the modified Vettermann drum test (ISO 10833:2025) (Endorsed by Asociación Española de Normalización in July of 2025.)... | |
| Textiles - Test for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test. (ISO 105-B02:1994/Amd.2:2 000) | |
| Textiles - Tests for colour fastness - Part A01: General principles of testing (ISO 105-A01:2010) | |
| Textiles - Tests for colour fastness - Part A03: Grey scale for assessing staining (ISO 105-A03:2019) | |
| Textiles - Tests for colour fastness - Part A11: Determination of colour fasness grades by digital imaging techniques (ISO 105-A11:2012) | |
| Textiles - Tests for colour fastness - Part B01: Colour fastness to light: Daylight (ISO 105-B01:2014) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART B01: COLOUR FASTNESS TO LIGHT: DAYLIGHT. (ISO 105-B01:1994, INCLUDING TECHNICAL CORRIGENDUM 1:1998) | |
| Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2013) | |
| Textiles - Tests for colour fastness - Part B02: Colour fastness to artificial light: Xenon arc fading lamp test (ISO 105-B02:2014) | |
| Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:1994) | |
| Textiles - Tests for colour fastness - Part B03: Colour fastness to weathering: Outdoor exposure (ISO 105-B03:2017) | |
| Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:1994) | |
| Textiles - Tests for colour fastness - Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp test (ISO 105-B04:2024) | |
| Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO 105-B06:1998, including Amendment 1:2002) | |
| Textiles - Tests for colour fastness - Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp test (ISO 105-B06:2020) | |
| Textiles - Tests for colour fastness - Part B07: Colour fastness to light of textiles wetted with artificial perspiration (ISO 105-B07:2009) | |
| Textiles - Tests for colour fastness - Part B08: Quality control of blue wool reference materials 1 to 7 - Amendment 1 (ISO 105-B08:1995/Amd 1:2009) | |
| Textiles - Tests for colour fastness - Part B10: Artificial weathering - Exposure to filtered xenon-arc radiation (ISO 105-B10:2011) | |
| Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:1994/Cor 1:2002) | |
| Textiles - Tests for colour fastness - Part C06: Colour fastness to domestic and commercial laundering (ISO 105-C06:2010) | |
| Textiles - Tests for colour fastness - Part C07: Colour fastness to wet scrubbing of pigment printed textiles. (ISO 105-C07:1999) | |
| Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator - Amendment 1... | |
| Textiles - Tests for colour fastness - Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low-temperature bleach activator (ISO 105-C08:2010) | |
| Textiles - Tests for colour fastness - Part C09: Colour fastness to domestic and commercial laundering - Oxidative bleach response using a non-phosphate reference detergent incorporating a low temperature bleach... | |
| Textiles - Tests for colour fastness - Part C10: Colour fastness to washing with soap or soap and soda (ISO 105-C10:2006) | |
| Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO 105-C12:2004) | |
| Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO 105-C12:2004/Cor 1:2007) | |
| Textiles - Tests for colour fastness - Part C12: Colour fastness to industrial laundering (ISO 105-C12:2024) | |
| Textiles - Tests for colour fastness - Part D01: Colour fastness to dry cleaning using perchloroethylene solvent (ISO 105-D01:2010) | |
| Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:1993) | |
| Textiles - Tests for colour fastness - Part D02: Colour fastness to rubbing: Organic solvents (ISO 105-D02:2016) | |
| Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2010) | |
| Textiles - Tests for colour fastness - Part E01: Colour fastness to water (ISO 105-E01:2013) | |
| Textiles - Tests for colour fastness - Part E02: Colour fastness to sea water (ISO 105-E02:2013) | |
| Textiles - Tests for colour fastness - Part E03: Colour fastness to chlorinated water (swimming-pool water) (ISO 105-E03:2010) | |
| Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2008) | |
| Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration (ISO 105-E04:2013) | |
| Textiles - Tests for colour fastness - Part E05: Colour fastness to spotting: Acid (ISO 105-E05:2006) | |
| Textiles - Tests for colour fastness - Part E06: Colour fastness to spotting: Alkali (ISO 105-E06:2006) | |
| Textiles - Tests for colour fastness - Part E07: Colour fastness to spotting: Water (ISO 105-E07:2010) | |
| Textiles - Tests for colour fastness - Part E09: Colour fastness to potting (ISO 105-E09:2010) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART E09: COLOUR FASTNESS TO POTTING. (ISO 105-E09:1989) | |
| Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:1997/Amd 1:2002) | |
| Textiles - Tests for colour fastness - Part E12: Colour fastness to milling: Alkaline milling (ISO 105-E12:2010) | |
| Textiles - Tests for colour fastness - Part E16: Colour fastness to water spotting on upholstery fabrics (ISO 105-E16:2006) | |
| Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:1993) | |
| Textiles - Tests for colour fastness - Part G01: Colour fastness to nitrogen oxides (ISO 105-G01:2016) | |
| Textiles - Tests for colour fastness - Part G02: Colour fastness to burnt-gas fumes (ISO 105-G02:1993, including Technical Corrigendum 1:1995/Cor 2:2009) | |
| Textiles - Tests for colour fastness - Part J03: Calculation of colour differences (ISO 105-J03:2009) | |
| Textiles - Tests for colour fastness - Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in illuminant (CMCCON02) (ISO 105-J05:2007) | |
| Textiles - Tests for colour fastness - Part N02: Colour fastness to bleaching - Peroxide (ISO 105-N02:1993) | |
| Textiles - Tests for colour fastness - Part P02: Colour fastness to pleating: Steam pleating (ISO 105-P02:2002) | |
| Textiles - Tests for colour fastness - Part X12: Color fastness to rubbing (ISO 105-X12:2001) | |
| Textiles - Tests for colour fastness - Part X12: Colour fastness to rubbing (ISO 105-X12:2016) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART X14: COLOUR FASTNESS TO ACID CHLORINATION OF WOOL: SODIUM DICHLOROISOCYANURATE (ISO 105-X14:1994). | |
| Textiles - Tests for colour fastness - Part X16: Color fastness to rubbing - Small areas (ISO 105-X16:2001) | |
| Textiles - Tests for colour fastness - Part X16: Colour fastness to rubbing - Small areas (ISO 105-X16:2016) | |
| Textiles - Tests for colour fastness - Part X18: Assessment of the potential to phenolic yellowing of materials (ISO 105-X18:2007) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z03: INTERCOMPABILITY OF BASIC DYES FOR ACRYLIC FIBRES (ISO 105-Z03:1996) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z04: DISPERSIBILITY OF DISPERSE DYES (ISO 105-Z04:1995) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z05: DETERMINATION OF THE DUSTING BEHAVIOUR OF DYES (ISO 105-Z05:1996) | |
| Textiles - Tests for colour fastness - Part Z06: Evaluation of dye and pigment migration. (ISO 105-Z06:1998) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z07: DETERMINATION OF APPLICATION SOLUBILITY AND SOLUTION STABILITY OF WATER-SOLUBLE DYES (ISO 105-Z07:1995) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z08: DETERMINATION OF SOLUBILITY AND SOLUTION STABILITY OF REACTIVE DYES IN THE PRESENCE OF ELECTROLYTES (ISO 105-Z08:1995) | |
| TEXTILES - TESTS FOR COLOUR FASTNESS - PART Z09: DETERMINATION OF COLD WATER SOLUBILITY OF WATER-SOLUBLE DYES (ISO 105-Z09:1995) | |
| Textiles - Tests for colour fastness - Part Z11: Evaluation of speckiness of colorant dispersions. (ISO 105-Z11:1998) | |
| Textiles- Test for colour fastness- Part A08: Vocabulary used in colour measurement. (ISO 105-A08:2001) | |
| Textiles- Test for colour fastness- Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference detergent incorporating a low temperature bleach activator (ISO 105-C08:2001) | |
| TEXTILES. COMMERCIAL LAUNDERING PROCEDURE FOR TEXTILE FABRICS PRIOR TO FLAMMABILITY TESTING. (ISO 10528:1995). | |
| TEXTILES. TEST FOR COLOUR FASTNESS. PART E08: COLOUR FASTNESS TO HOT WATER. (ISO 105-E08:1994). | |
| TEXTILES. TEST FOR COLOUR FASTNESS. PART E14: COLOUR FASTNESS TO ACID-FELTING: MILD. (ISO 105-E14:1994). | |
| TEXTILES. TEST FOR COLOUR FASTNESS. PART N03: COLOUR FASTNESS TO BLEACHING: SODIUM CHLORITE (MILD). (ISO 105-N03:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART A01: GENERAL PRINCIPLES OF TESTING. (ISO 105-AO1:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART A04: METHOD FOR THE INSTRUMENTAL ASSESSMENT OF THE DEGREE OF STAINING OF ADJACENT FABRICS. (ISO 105-A04:1989) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART A05: INSTRUMENTAL ASSESSMENT OF CHANGE IN COLOUR FOR DETERMINATION OF GREY SCALE RATING (ISO 105-A05:1996, INCLUDING TECHNICAL CORRIGENDUM 1:1997). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART A06: INSTRUMENTAL DETERMINATION OF 1/1 STANDARD DEPTH OF COLOUR. (ISO 105-A06:1995). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART B02: COLOUR FASTNESS TO ARTIFICIAL LIGHT: XENON ARC FADING LAMP TEST. (ISO 105-B02:1994, INCLUDING AMENDMENT 1:1998) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART B05: DETECTION AND ASSESSMENt of photochromism. (ISO 105-B05:1993) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART B08: QUALITY CONTROL OF BLUE WOOL REFERENCE MATERIALS 1 TO 7. (ISO 105-B08:1995) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART C06: COLOUR FASTNESS TO DOMESTIC AND COMMERCIAL LAUNDERING. (ISO 105-C06:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART D01: COLOUR FASTNESS TO DRY CLEANING. (ISO 105-D01:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E01: COLOUR FASTNESS TO WATER. (ISO 105-E01:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E02: COLOUR FASTNESS TO SEA WATER. (ISO 105-E02:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E03: COLOUR FASTNESS TO CHLORINATED WATER (SWIMMING-POOL WATER). (ISO 105-E03:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E04: COLOUR FASTNESS TO PERSPIRATION (ISO 105-E04:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E05: COLOUR FASTNESS TO SPOTTING: ACID (ISO 105-E05:1989). | |
| Textiles. Tests for colour fastness. Part E05: Colour fastness to spotting: Acid (ISO/DIS 105-E05:2010) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E06: COLOUR FASTNESS TO SPOTTING: ALKALI. (ISO 105-E06:1989). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E07: COLOUR FASTNESS TO SPOTTING: WATER. (ISO 105-E07:1989). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E10: COLOUR FASTNESS TO DECATIZING. (ISO 105-E10:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E11: COLOUR FASTNESS TO STEAMING. (ISO 105-E11:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E12: COLOUR FASTNESS TO MILING: ALKALINE MILLING. (ISO 105-E12:1989). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART E13: COLOUR FASTNESS TO ACID-FELTING: SEVERE (ISO 105-E13:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART G02:COLOUR FASTNESS TO BURNT-GAS FUMES. (ISO 105-G02:1993, INCLUDING TECHNICAL CORRIGENDUM 1:1995). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART G03: COLOUR FASTNESS TO 0Z0NE IN THE ATMOSPHERE. (ISO 105-G03:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART J01: GENERAL PRINCIPLES FOR MEASURMENT OF SURFACE COLOUR (ISO 105-J01:1997) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART J02: INSTRUMENTAL ASSESSMENT OF RELATIVE WHITENESS. (ISO 105-J02:1997, INCLUDING TECHNICAL CORRIGENDUM 1:1998) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART J03: CALCULATION OF COLOUR DIFFERENCES (ISO 105-J03:1995, INCLUDING TECHNICAL CORRIGENDUM 1:1996). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART N04: COLOUR FASTNESS TO BLEACHING: SODIUM CHLORITE (SEVERE). (ISO 105-N04:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART N05: COLOUR FASTNESS TO STOVING. (ISO 105-N05:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART P01: COLOUR FASTNESS TO DRY HEAT (ISO 105-P01:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART P02: COLOUR FASTNESS TO PLEATING: STEAM PLEATING. (ISO 105-P02:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART S01: COLOUR FASTNESS TO VULCANIZATION: HOT AIR. (ISO 105-S01:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART S02: COLOUR FASTNESS TO VULCANIZING: SULPHUR MONOCHLORIDE. (ISO 105-S02:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART S03: COLOUR FASTNESS TO VULCanization: Open steam. (ISO 105-S03:1993) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X01: COLOUR FASTNESS TO CARBONIZING: ALUMINIUM CHLORIDE. (ISO 105-X01:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X02: COLOUR FASTNESS TO CARBONIZING: SULPHURIC ACID. (ISO 105-X02:1993) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X04: COLOUR FASTNESS TO MERCERIZING. (ISO 105-X04:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X05: COLOUR FASTNESS TO ORGANIC SOLVENTS. (ISO 105-X05:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X06:COLOUR FASTNESS TO SODA BOILING. (ISO 105-X06:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X07:COLOUR FASTNESS TO CROSS-DYEING: WOOL. (ISO 105-X07:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X08: COLOUR FASTNESS TO DEGUMMING. (ISO 105-X08:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X09: COLOUR FASTNESS TO FORMaldehyde. (ISO 105-X09:1993) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X10: ASSESSMENT FOR MIGRATIOn of textiles colours intro polyvinyl chloride coatings. (ISO 105-X10:1993) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X11: COLOUR FASTNESS TO HOT PRESSING. (ISO 105-X11:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X12: COLOUR FASTNESS TO RUBBING. (ISO 105-X12:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART X13: COLOUR FASTNESS OF WOOL DYES TO PROCESSES USING CHEMICAL MEANS FOR CREASING, PLEATING AND SETTING. (ISO 105-X13:1994). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART Z01: COLOUR FASTNESS TO METAls in the dyebath: Chromium salts. (ISO 105-Z01:1993) | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART Z02: COLOUR FASTNESS TO METALS IN THE DYEBATH: IRON AND COPPER. (ISO 105-Z02:1993). | |
| TEXTILES. TESTS FOR COLOUR FASTNESS. PART Z10: DETERMINATION OF RELATIVE COLOUR STRENGTH OF DYES IN SOLUTION. (ISO 105-Z10:1997) | |
| Water and soil quality - Determination of the toxic effect of sediment and soil samples on growth, fertility and reproduction of Caenorhabditis elegans (Nematoda) (ISO 10872:2020) | |
| Water quality - Detection and enumeration of bacteriophages - Part 3: Validation of methods for concentration of bacteriophages from water (ISO 10705-3:2003) | |
| Water quality - Determination of pH (ISO 10523:2008) | |
| Water quality - Determination of the activity concentration of radionuclides - Method by high resolution gamma-ray spectrometry (ISO 10703:2007) | |
| Water quality - Gamma-ray emitting radionuclides - Test method using high resolution gamma-ray spectrometry (ISO 10703:2021) (Endorsed by Asociación Española de Normalización in September of 2021.) | |
| Water quality - Gross alpha and gross beta activity - Test method using thin source deposit (ISO 10704:2019) (Endorsed by Asociación Española de Normalización in May of 2019.) | |
| Water quality - Growth inhibition test with the marine and brackish water macroalga Ceramium tenuicorne (ISO 10710:2010) | |
| Water quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO 10634:1995) | |
| Water quality - Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters (ISO 10870:2012) | |
| Water quality - Measurement of gross alpha and gross beta activity in non-saline water - Thin source deposit method (ISO 10704:2009) | |
| Water quality - Preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO 10634: 2018) | |
| Water quality - Pseudomonas putida growth inhibition test (pseudomonas cell multiplication inhibition test)(ISO 10712:1995) | |
| Water quality. Detection and enumeration of bacteriophages. Part 1: Enumeration of F-specific RNA bacteriophages. (ISO 10705-1:1995) | |
| Water quality. Detection and enumeration of bacteriophages. Part 2: Enumeration of somatic coliphages. (ISO 10705-2:2000) | |
| WATER QUALITY. DETERMINATION OF SELECTED ORGANIC NITROGEN AND PHOSPHORUS COMPOUNDS. GAS CHROMATOGRAPHY METHODS. (ISO 10695:2000) | |
| WATER QUALITY. EVALUATION IN AN AQUEOUS MEDIUM OF THE "ULTIMATE" AEROBIC BIODEGRADABILITY OF ORGANIC COMPOUNDS. METHOD BY ANALYSIS OF BIOCHEMICAL OXYGEN DEMAND (CLOSED BOTTLE TEST). (ISO 10707:1994). | |
| Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2003) | |
| Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion welding of cast iron - Classification (ISO 1071:2015) | |
| Widening test on nuts (ISO 10484:1997) |
| << Prev | Next >> |