AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
60
70
80
90
100
109
110
111
112
113
114
115
116
117
118
119
120
121
130
140
150
160
170
180
181
| Product Name | Notes |
|---|---|
| Active implantable medical devices -- Part 2-1: Particular requirements for active implantable medical devices intended to treat bradyarrhythmia (cardiac pacemakers) | |
| Active implantable medical devices -- Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) | |
| Active implantable medical devices -- Part 2-3: Particular requirements for cochlear and auditory brainstem implant systems | |
| ACTIVE IMPLANTABLE MEDICAL DEVICES. PART 1: GENERAL REQUIREMENTS FOR SAFETY, MARKING AND INFORMATION TO BE PROVIDED BY THE MANUFACTURER. | |
| Aerospace series - Aircraft internal air quality standards, criteria and determination methods (Endorsed by AENOR in November of 2009.) | |
| Aerospace series - Aluminium alloy AL-P7050 - T76 - Sheet - 0,8 mm =< a =< 6 mm (Endorsed by AENOR in October of 2005.) | |
| Aerospace series - Aluminium alloy AL-P7050-T762 - Sheet - 0,8 mm <=a <=6 mm (Endorsed by AENOR in October of 2005.) | |
| Aerospace series - Aluminium pigmented coatings - Coating methods (Endorsed by AENOR in September of 2009.) | |
| Aerospace series - Aluminium pigmented coatings - Coating methods (Endorsed by AENOR in September of 2016.) | |
| Aerospace series - Aluminium pigmented coatings for fasteners - Technical specification (Endorsed by AENOR in October of 2010.) | |
| Aerospace series - Aluminium pigmented organic coatings - Coating methods (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Aerospace series - Aluminium pigmented organic coatings for fasteners - Technical specification (Endorsed by Asociación Española de Normalización in January of 2025.) | |
| Aerospace series - Bearing, spherical, plain, in corrosion resisting steel with self-lubricating liner - Elevated load under low oscillations - Wide series - Dimensions and loads - Part 2: Inch... | |
| Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 003: Inch series... | |
| Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Narrow series - Dimensions and loads - Part 2: Inch series... | |
| Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Technical specification (Endorsed by AENOR in January of 2012.) | |
| Aerospace series - Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations - Wide series - Dimensions and loads - Part 003: Inch series... | |
| Aerospace series - Blast media - Brown corundum, without iron (Endorsed by AENOR in June of 2010.) | |
| Aerospace series - Blast media - White corundum (Endorsed by AENOR in June of 2010.) | |
| Aerospace series - Bolts, large bihexagonal head, close tolerance normal shank, medium length thread, in heat resisting nickel base alloy, passivated, with aluminium pigmented coating - Classification: 1 550 MPa... | |
| Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at ambient... | |
| Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in July of 2009.) | |
| Aerospace series - Bushes, flanged in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in October of 2016.) | |
| Aerospace series - Bushes, flanged in corrosion-resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in September of 2009.) | |
| Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in July of 2009.) | |
| Aerospace series - Bushes, plain in aluminium alloy with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in October of 2016.) | |
| Aerospace series - Bushes, plain in corrosion resisting steel with self-lubricating liner, elevated load - Part 2: Dimensions and loads - Inch series (Endorsed by AENOR in September of 2009.)... | |
| Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 001:... | |
| Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 002:... | |
| Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between - 65 °C and 260 °C - Part 004:... | |
| Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 003: DN... | |
| Aerospace series - Cable, electrical, fire resistant - Single and twisted multicore assembly, screened (braided) and jacketed - Operating temperatures between -65 °C and 260 °C - Part 005: DW... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification (Endorsed by AENOR in May of 2009.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in July of 2019.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 002: General (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 002: General (Endorsed by AENOR in November of 2009.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohm, 200 °C, type WZ - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohms, 200 °C, type WZ - Product standard (Endorsed by Asociación Española de Normalización in November... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 003: Cable, coaxial, 50 ohms, 200 °C, type WZ - Product standard (Endorsed by Asociación Española de Normalización in October... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 004: Cable, microcoaxial, high immunity, 50 Ohms, 200 °C, type WS - Product standard (Endorsed by AENOR in January of... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 005: Cable, coaxial, 75 ohmx, 200 °C, type WL - Product standard (Endorsed by AENOR in September of 2015.) | |
| Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohm, 200 °C, type WM - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohms, 200 °C, type WM - Product standard (Endorsed by Asociación Española de Normalización in June... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 ohms, 200 °C, type WM - Product standard (Endorsed by Asociación Española de Normalización in November... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 006: Cable, coaxial, 50 Ohms, 200 °C, type WM - Product standard (Endorsed by Asociación Española de Normalización in October... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial 50 ¿, 200 °C, type WN - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 ohms, 200 °C, type WN - Product standard (Endorsed by Asociación Española de Normalización in January... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 ohms, 200 °C, type WN - Product standard (Endorsed by Asociación Española de Normalización in June... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 007: Cable, coaxial, 50 Ohms, 200 °C, type WN - Product standard (Endorsed by Asociación Española de Normalización in October... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200 °C, Type WD - Product standard (Endorsed by Asociación Española de Normalización in October... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 008: Cable, coaxial, 50 ohms, 200°C., Type WD - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN) - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN) - Product standard (Endorsed by Asociación Española... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 009: Cable, coaxial, light weight, 50 ohms, 180 °C, type KW (light WN) - Product standard | |
| Aerospace series - Cable, electrical, for signal transmission - Part 010 : Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD) - Product standard (Endorsed by Asociación... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 010: Cable, coaxial, light weight, 50 Ohms, 200 °C, type KX (light WD) - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Cable, electrical, for signal transmission - Part 010: Cable, coaxial, light weight, 50 ohms, 200 °C, type KX (light WN) - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Cables, electrical, for general Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: Genera (Endorsed by Asociación Española de... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 002: General (Endorsed by AENOR in November... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - jacketed or screened and jacketed - Part 003: Tin plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 004: Tin plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 006: Tin plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 009: Silver plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 010: Silver plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 011: Nickel plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 012: Nickel plated copper - Operating temperatures,... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Jacketed or screened and jacketed - Part 013: SX, TC and UC - Nickel... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General (Endorsed by AENOR in March of 2012.) | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 002: General (Endorsed by Asociación Española de Normalización in October of 2018.) | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 003: Tin plated copper - Operating temperatures, between -65 °C and 135 °C... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between –65 °C and 135 °C... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 004: Tin plated copper - Operating temperatures, between - 65 °C and 135... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper — Operating temperatures, between –65 °C and 150 °C... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 005: Silver plated copper - Operating temperatures between - 65 °C and 150... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper - Operating temperatures, between –65 °C and 150 °C... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 006: Silver plated copper Operating temperatures, between - 65 °C and 150 °C... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between –65 °C and 150 °C... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 007: Nickel plated copper - Operating temperatures, between - 65 °C and 150... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 008: BP - Nickel plated copper - Operating temperatures, between -65 °C and... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly - XLETFE Family - Part 009: BJ - Nickel plated copper - Operating temperatures, between -65 °C and... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 005: Tin plated copper - Operating temperatures, between -... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 007: Silver plated copper - Operating temperatures, between -... | |
| Aerospace series - Cables, electrical, for general purpose, single and multicore assembly XLETFE Family jacketed or screened and jacketed - Part 008: Silver plated copper - Operating temperatures, between -... | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 100: Tight structure 62,5/125 µm core GI fibre 1,8 mm outside diameter - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 101: Tight structure 62,5 µm core GI fibre 0,9 mm outside diameter - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 102: Semi-loose 62,5 µm/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard (Endorsed by Asociación Española... | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5 µm/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard (Endorsed... | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 103: Semi-loose, ruggedized simplex construction 62,5/125 µm GI fibre nominal 2,74 mm, outside diameter - Product standard | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 104: Semi-loose, ruggedized duplex construction 62,5/125 µm GI fibre nominal, 4,95 mm outside diameter - Product standard (Endorsed by... | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 105: Semi-loose, ruggedized quadraxial construction 62,5/125 µm GI fibre nominal, 5,72 mm outside diameter - Product standard (Endorsed by... | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - Product standard | |
| Aerospace series - Cables, optical 125 µm diameter cladding - Part 401: Tight structure bend insensitive 50 µm/125 µm GI fibre nominal, 1,8 mm outside diameter - Product standard | |
| Aerospace series - Cables, optical 125 µm outside diameter cladding - Part 102: Semi-loose 62,5/125 µm GI fibre nominal 1,8 mm outside diameter - Product standard | |
| Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification (Endorsed by AENOR in May of 2009.) | |
| Aerospace series - Cables, optical, 125 µm diameter cladding - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in September of 2018.) | |
| Aerospace series - Cables, optical, 125 µm diameter cladding - Part 106: Semi-loose structure 62,5/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard (Endorsed by Asociación Española... | |
| Aerospace series - Cables, optical, 125 µm diameter cladding - Part 200: Semi-loose structure 9/125 µm GI fibre nominal 0,9 mm outside diameter - Product standard (Endorsed by Asociación Española... | |
| Aerospace series - Cables, optical, 125 µm diameter cladding - Part 201: Semi-loose structure 9/125 µm SM fibre nominal 1,8 mm outside diameter - Product standard (Endorsed by Asociación Española... | |
| Aerospace series - Cables, optical, 125 µm diameter cladding - Part 202: Semi-loose, ruggedized simplex construction 9/125 µm SM fibre nominal 2,74 mm outside diameter - Product standard (Endorsed by... | |
| Aerospace series - Cables, optical, 125 µm diameter cladding - Part 301: Tight structure 50/125 µm GI, fibre nominal 1,8 mm, outside diameter - Product standard (Endorsed by Asociación Española... | |
| Aerospace series - Cables, optical, single core 200 µm/280 µm fibre, 2,5 mm outer jacket - Technical specification (Endorsed by AENOR in March of 2009.) | |
| Aerospace series - Clips, spring tension - Technical specification (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Clips, spring tension, in alloy steel FE-PA3903 (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 001: Technical specification (Endorsed by AENOR in November of 2007.) | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements (Endorsed by AENOR in November... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard (Endorsed by AENOR in November... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard (Endorsed by AENOR in July... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 004: Jam nut receptacle - Product standard (Endorsed by AENOR in November... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 005: Plug - Product standard (Endorsed by AENOR in November of 2007.)... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C to 125... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 001: Technical specification (Endorsed by AENOR in July of 2012.)... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 001: Technical specification (Endorsed by Asociación Española de Normalización in... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 002: Specification of performance and contact arrangements (Endorsed by AENOR... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 003: Square flange receptacle - Product standard (Endorsed by AENOR... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 005: Plug - Product standard (Endorsed by AENOR in July... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641 multimode cable -55 °C... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 101: Optical contact for EN 4641-100 cable - 55 °C... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 201: Optical contact for EN 4641 singlemode cable -55 °C... | |
| Aerospace series - Connectors, optical, circular, single and multipin, coupled by triple start threaded ring - Flush contacts - Part 901: Filler plugs - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification (Endorsed by AENOR in February of 2008.) | |
| Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards (Endorsed by AENOR in February of 2008.)... | |
| Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Male optical module - Product standard (Endorsed by AENOR in January... | |
| Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Female optical module - Product standard (Endorsed by AENOR in January... | |
| Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 005: Removable alignment sleeve holder - Product standard (Endorsed by AENOR in... | |
| Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 101: Optical contact for cable EN 4641-100 - Operating temperatures between -... | |
| Aerospace series - Connectors, optical, rectangular, modular, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 102: Optical contact for cable EN 4641-102 - Operating temperatures between -... | |
| Aerospace series - Connectors, optical, rectangular, multicontact, rack and panel, Quadrax cavity, 2,5 mm diameter ferrule - Operating temperatures - 65 °C to 125 °C (cable dependent) - Flush contacts... | |
| Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 001: Technical specification (Endorsed by AENOR in April of 2009.)... | |
| Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 002: List of product standards (Endorsed by AENOR in April... | |
| Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 003: Plug optical connector - Product standard (Endorsed by AENOR... | |
| Aerospace series - Connectors, optical, rectangular, rack and panel, multicontact, 1,25 diameter ferrule, with removable alignment sleeve holder - Part 004: Receptacle optical connector - Product standard (Endorsed by AENOR... | |
| Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 001: Technical specification (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002: Index of product standards (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 002: Index of product standards (Endorsed by Asociación Española de Normalización in July of 2019.) | |
| Aerospace series - Elements of electrical and optical connection - Sealing plugs - Part 003: Class T - Product standard (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 001: Termination methods and tools (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 002: Test and measurement (Endorsed by Asociación Española de Normalización in February of 2018.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 003: Looming and installation practices (Endorsed by Asociación Española de Normalización in February of 2018.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance and inspection (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Fibre optic systems - Handbook - Part 004: Repair, maintenance, cleaning and inspection (Endorsed by Asociación Española de Normalización in February of 2018.) | |
| Aerospace series - Heat resisting alloy CO-PH4101 (CoCr20W15Ni) -Vacuum melted - Solution treated - Forgings - De = 100 mm | |
| Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Bars and sections - De <= 100 mm (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Forgings - De <= 100 mm (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated - Sheets and strips - a <= 3 mm (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and descaled - Sheets and plates - 3 mm < a <= 50 mm (Endorsed by Asociación Española de Normalización... | |
| Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Bars and sections - De <= 100 mm (Endorsed by Asociación Española de Normalización in April... | |
| Aerospace series - Heat resisting alloy X12CrNiCoMoW21-20 - Solution treated and precipitation treated - Forgings - De <= 100 mm (Endorsed by Asociación Española de Normalización in April of 2020.)... | |
| Aerospace series - Inserts, MJ threads, self-locking, self-broaching keys - Technical specification (Endorsed by AENOR in May of 2010.) | |
| Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Design standard (Endorsed by AENOR in May of 2010.) | |
| Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys - Installation and removal procedure (Endorsed by AENOR in May of 2010.) | |
| Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH1302 (Waspaloy), silver plate (Endorsed by AENOR in June of 2010.) | |
| Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting nickel base alloy NI-PH2601 (Inconel 718), silver plated (Endorsed by AENOR in June of 2010.) | |
| Aerospace series - Inserts, MJ threads, self-locking, with self-broaching keys, in heat resisting steel FE-PA2601 (A286), MoS2 coated (Endorsed by AENOR in June of 2010.) | |
| Aerospace series - Inserts, screw thread, helical coil, self-locking, in heat resisting nickel base alloy NI-PH1801 (NI-P96HT, Nimonic 90), silver plated (Endorsed by AENOR in June of 2008.) | |
| Aerospace series - Magnesium alloy MG-C18002 - T4 - Chill casting (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Magnesium alloy MG-C18002 - T4 - Sand casting (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules (Endorsed by AENOR in December of 2012.) | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 001: General rules (Endorsed by Asociación Española de Normalización in October of 2024.) | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 002: Specific rules for aluminium, aluminium alloys and magnesium alloys (Endorsed by Asociación Española... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys (Endorsed by AENOR in December of 2012.)... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 003: Specific rules for heat resisting alloys (Endorsed by Asociación Española de Normalización in... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys (Endorsed by AENOR in December of... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 004: Specific rules for titanium and titanium alloys (Endorsed by Asociación Española de Normalización... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels (Endorsed by AENOR in December of 2012.) | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 005: Specific rules for steels (Endorsed by Asociación Española de Normalización in October of... | |
| Aerospace series - Metallic materials - Rules for drafting and presentation of material standards - Part 006: Specific rules for filler metals for brazing (Endorsed by Asociación Española de Normalización... | |
| Aerospace series - Metallic materials - Test methods - Sharp edge-notch tensile testing for sheet and strip (Endorsed by AENOR in March of 2013.) | |
| Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 16 Nm (Endorsed by AENOR in March of 2013.) | |
| Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 19 Nm (Endorsed by AENOR in March of 2013.) | |
| Aerospace series - Non-metallic materials - Anaerobic polymerisable compounds - Threadlocking - Torque strength 2 Nm (Endorsed by AENOR in March of 2013.) | |
| Aerospace series - Non-metallic materials - Textiles - Narrow woven fabrics - Technical specification (Endorsed by AENOR in February of 2007.) | |
| Aerospace series - Non-metallic materials - Textiles - Test method - Determination of conductivity and pH of aqueous extracts (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| Aerospace series - Non-metallic materials - Textiles - Test method - Determination of dimensional stability (Endorsed by AENOR in August of 2013.) | |
| Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water extractable matter (Endorsed by AENOR in August of 2013.) | |
| Aerospace series - Non-metallic materials - Textiles - Test method - Determination of water soluble chloride and sulfate of aqueous extracts (Endorsed by AENOR in August of 2013.) | |
| Aerospace series - Non-metallic materials - Textiles - Wide woven fabrics - Technical specification (Endorsed by AENOR in February of 2007.) | |
| Aerospace series - Non-metallic materials, Textiles - Test method - Determination of flexibility of narrow fabrics | |
| Aerospace series - Nuts, barrel, self-locking, floating, self-aligning, in heat resisting nickel base alloy, MoS2 lubricated - Classification: 1 550 MPa (at ambient temperature) / 315 °C (Endorsed by AENOR... | |
| Aerospace series - Nuts, elliptical clinch, self-locking, MJ threads, in heat resisting steel FE-PA2601 (A286), MoS2 coated, Classification: 900 MPa (at ambient temperature)/ 425 °C (Endorsed by AENOR in April... | |
| Aerospace series - Paints and varnishes - Cold curing intermediate coat (Endorsed by AENOR in June of 2011.) | |
| Aerospace series - Paints and varnishes - Cold curing intermediate coat (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Aerospace series - Paints and varnishes - Determination of solar absorptance (Endorsed by AENOR in August of 2011.) | |
| Aerospace series - Paints and varnishes - Test method for anti slip coatings - Determination of the sliding friction behaviour (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Paints and varnishes - Test method for determination of infrared reflectance (Endorsed by AENOR in January of 2007.) | |
| Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance (Endorsed by AENOR in February of 2013.) | |
| Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance (Endorsed by AENOR in February of 2013.) | |
| Aerospace series - Paints and varnishes - Two component, cold curing polyurethane paint, anti slip (Endorsed by AENOR in May of 2007.) | |
| Aerospace series - Pipe coupling 37°, in heat resisting steel - Cap assemblies- Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 37°, in heat resisting steel - Ferrules, welded end - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 37°, in heat resisting steel - Swivel nuts - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 37°, spherical up to 21 000 kPa - Inch series - Technical specification (Endorsed by AENOR in September of 2015.) | |
| Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Elbow 90° nipples, welded end - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight nipples, welded end - Inch series (Endorsed by AENOR in September of 2015.) | |
| Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Straight unions, threaded - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 37°, spherical, in heat resisting steel - Tees nipples, welded end - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 37°, spherical, up to 21000 kPa - Inch series - Technical specification (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling 8° 30' in titanium alloy - Elbows 45°, with thrust wire nut (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical (Endorsed by AENOR in February of 2015.) | |
| Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 1: Male sealing ends, spherical (Endorsed by AENOR in March of 2003.) | |
| Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 2: Port ends (Endorsed by AENOR in March of 2003.) | |
| Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 3: Port connections (Endorsed by AENOR in March of 2003.) | |
| Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends (Endorsed by AENOR in February of 2015.) | |
| Aerospace series - Pipe coupling, 37° - Design configuration - Inch series - Part 4: Female sealing ends (Endorsed by AENOR in March of 2003.) | |
| Aerospace series - Pipe coupling, 37°, in heat resisting steel - Swivel nuts - Inch series (Endorsed by AENOR in November of 2014.) | |
| Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series (Endorsed by AENOR in June... | |
| Aerospace series - Pipe coupling, in heat resisting steel or in heat resisting nickel alloy - Coupling end, welded - Design configuration - Inch series (Endorsed by AENOR in March... | |
| Aerospace series - Pipe coupling, welded, in heat resisting steel - Elbow 90° - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling, welded, in heat resisting steel - Reductors - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe coupling, welded, in heat resisting steel - Tees - Inch series (Endorsed by AENOR in April of 2003.) | |
| Aerospace series - Pipe couplings, 60°, spherical, in titanium alloy TI-P64001, adapters, straight, double end, with locking ring (Endorsed by Asociación Española de Normalización in September of 2018.) | |
| Aerospace series - Recommended practices for standardising company standards (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Retainers, spring, sheet metal, for self-locking barrel nuts, in corrosion resisting steel, passivated (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Rings, split, in stainless steel (Endorsed by AENOR in November of 2006.) | |
| Aerospace series - Rod-ends, adjustable, single fork and threaded shank with engagement: 1,5 × thread diameter in titanium alloys - Dimensions and loads (Endorsed by AENOR in November of 2006.)... | |
| Aerospace series - Screws, 100 countersunk normal head, offset cruciform recess, threaded to head, in titanium alloy, anodized, with aluminium pigmented coating, metric series - Classification: 1 100 MPa (at... | |
| Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in heat resisting steel FE-PA2601 (A286), passivated - Classification: 900 MPa (at ambient temperature) / 650 °C (Endorsed... | |
| Aerospace series - Screws, 100° countersunk head, six lobe recess, short thread, in titanium alloy TI-P64001, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient temperature) / 315... | |
| Aerospace series - Screws, 100° countersunk head, six lobes recess, short thread, in heat resisting nickel base alloy NI-PH2601 (Inconel 718) - Classification: 1 270 MPa (at ambient temperature) /... | |
| Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa... | |
| Aerospace series - Screws, 100° countersunk reduced head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa... | |
| Aerospace series - Screws, pan head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1 100 MPa (at ambient... | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 001: Technical specification (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves (Endorsed by AENOR in July of 2006.) | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 002: List and utilization of sealing sleeves (Endorsed by Asociación Española de Normalización in August of 2024.) | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 004: Sealing sleeves for external diameter cable 3 mm to 5,8 mm - Product standard (Endorsed by Asociación... | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 005: Sealing sleeves for external diameter cable 3 mm to 4,1 mm - Product standard (Endorsed by AENOR... | |
| Aerospace series - Sealing sleeves used in elements of connection - Part 006: Sealing sleeves for external diameter cable 4,68 mm to 5,05 mm - Product standard (Endorsed by AENOR... | |
| Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series (Endorsed by Asociación Española de Normalización in December... | |
| Aerospace series - Spherical plain bearing in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series (Endorsed by Asociación Española de Normalización in December... | |
| Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, narrow series - Dimensions and loads - Inch series (Endorsed by AENOR in July of 2009.) | |
| Aerospace series - Spherical plain bearings in corrosion resisting steel with self-lubricating liner, wide series - Dimensions and loads - Inch series (Endorsed by AENOR in July of 2009.) | |
| Aerospace series - Spiral drive recesses for threaded fasteners - Geometrical definition and technical requirements (Endorsed by Asociación Española de Normalización in December of 2019.) | |
| Aerospace series - Steel FE-PA3903 (X10CrNi18-8) - Cold rolled - Strip for springs - a <= 3 mm - 1 250 MPa <= Rm <= 1 640 MPa (Endorsed by... | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De <= 150 mm - 1 100 MPa <= Rm <= 1 300... | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Bar - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa... | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forging stock - De <= 300 mm (Endorsed by AENOR in February of 2008.) | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De <= 150 mm - 1 100 MPa <= Rm <= 1 300... | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Forgings - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa... | |
| Aerospace series - Steel FE-PM 3504 (X4CrNiMo16-5-1) - Air melted - Hardened and tempered - Sheet and plate - 0,6 mm <= a <= 50 mm - 900 MPa <=... | |
| Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D <= 150 mm -... | |
| Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D< = 150 mm -... | |
| Aerospace series - Steel FE-PM1505 (X1CrNiMoAlTi12-9-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <= 150 mm -... | |
| Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Bar - a or D <= 150 mm -... | |
| Aerospace series - Steel FE-PM1506 (X5CrNiMoAl13-8-2) - Vacuum induction melted and consumable electrode remelted - Solution treated and precipitation treated - Forgings - a or D <= 150 mm -... | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De = 200 mm — 1 150 MPa = Rm = 1 300 MPa... | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bar - De = 200 mm - 900 MPa = Rm = 1 050 MPa | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa (Endorsed... | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Bars - De = 200 mm - 1 150 MPa = Rm = 1 300 MPa... | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De <= 200 mm - 900 MPa <= Rm <= 1 050 MPa (Endorsed... | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De = 200 mm - 1 150 MPa = Rm = 1 300 MPa... | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Hardened and tempered - Forgings - De = 200 mm - 900 MPa = Rm = 1 050 MPa | |
| Aerospace series - Steel X4CrNiMo16-5-1 (1.4418) - Air melted - Softened - Forging stock - De <= 300 mm (Endorsed by AENOR in April of 2013.) | |
| Aerospace series - Studs, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) (Endorsed by AENOR... | |
| Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Design standard (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Studs, in titanium alloy TI-P64001, with serrated locking ring in corrosion resisting steel - Installation and removal procedure (Endorsed by AENOR in March of 2006.) | |
| Aerospace series - Studs, MJ threads, in titanium alloy TI-P64001, MoS2 coated, with serrated locking ring in corrosion resisting steel - Strength class: 1 100 MPa (at ambient temperature) -... | |
| Aerospace series - Textiles - Testing of narrow woven fabrics - Determination of warp bow (Endorsed by AENOR in February of 2007.) | |
| Aerospace series - Washers, tab in corrosion resisting steel for flight control rods - Dimensions (Endorsed by AENOR in November of 2006.) | |
| Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 003: Welding and brazing of homogeneous assemblies of unalloyed and low alloy steels (Endorsed by AENOR in... | |
| Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 004: Welding and brazing of homogeneous assemblies of high alloyed steels (Endorsed by AENOR in November of... | |
| Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 005: Homogeneous assemblies of heat resisting Ni or Co base alloys (Endorsed by AENOR in January of... | |
| Aerospace series - Weldability and brazeability of materials in aerospace constructions - Part 006: Homogeneous assemblies of titanium alloys (Endorsed by AENOR in May of 2013.) | |
| Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 001: General requirements (Endorsed by AENOR in June of 2008.) | |
| Aerospace series - Welded and brazed assemblies for aerospace constructions - Weldability and brazeability of materials - Part 002: Homogeneous assemblies aluminium and aluminium alloys (Endorsed by AENOR in June... | |
| ATTESTATION STANDARD FOR THE ASSESSMENT OF CONTRACT AWARD PROCEDURES OF ENTITIES OPERATING IN THE WATER, ENERGY, TRANSPORT AND TELECOMMUNICATION SECTORS. | |
| AUIDE POR PROCUREMENT OF POWER STATION EQUIPMENT. PART 1: COMMON CLAUSES. | |
| Building lime - Part 1: Definitions, specifications and conformity criteria. | |
| Building lime - Part 1: Definitions, specifications and conformity criteria | |
| Building lime - Part 2 : Test methods. | |
| Building lime - Part 2: Test methods | |
| Building lime - Part 3: Conformity evaluation | |
| BUILDING LIME. PART 2: TEST METHODS. | |
| CALIBRATION AND TESTING LABORATORY ACCREDITATION SYSTEM. GENERAL REQUIREMENTS FOR OPERATION AND RECOGNITION. | |
| District heating pipes - Bonded single pipe systems for directly buried hot water networks - Factory made fitting assemblies of steel service pipes, polyurethane thermal insulation and a casing of... | |
| District heating pipes - Preinsulated bonded pipe systems for directly buried hot water networks - Fitting assemblies of steel service pipes, polyurethane thermal insulation and outer casing of polyethylene | |
| Durability of wood and wood-based products - Guidance on performance | |
| Durability of wood and wood-based products - Natural durability of solid wood - Guide to the durability requirements for wood to be used in hazard classes | |
| Fly ash for concrete - Part 1: Definition, specifications and conformity criteria | |
| Fly ash for concrete - Part 2: Conformity evaluation | |
| FLY ASH FOR CONCRETE. DEFINITIONS, REQUIREMENTS AND QUALITY CONTROL. | |
| Food processing machinery - Dough mixers - Safety and hygiene requirements. | |
| Food processing machinery - Dough mixers - Safety and hygiene requirements | |
| Food processing machinery - Planetary mixers - Safety and hygiene requirements. | |
| Food processing machinery - Planetary mixers - Safety and hygiene requirements | |
| GENERAL CRITERIA FOR SUPPLIER'S DECLARATION OF CONFORMITY. (ISO/IEC GUIDE 22:1996). | |
| GENERAL CRITERIA FOR THE OPERATION OF VARIOUS TYPES OF BODIES PERFORMING INSPECTION. | |
| General method for assessing the proportion of recycled material content in energy-related products | |
| General method for assessing the proportion of reused components in energy-related products | |
| General method for the assessment of the ability to remanufacture energy-related products | |
| General method for the assessment of the durability of energy-related products | |
| General method to declare the use of critical raw materials in energy-related products | |
| General methods for assessing the recyclability and recoverability of energy-related products | |
| General methods for the assessment of the ability to repair, reuse and upgrade energy-related products | |
| GENERAL REQUIREMENTS FOR ASSESSMENT AND ACREDITATION OF CERTIFICATION/REGIST RATION BODIES. (ISO/IEC GUIDE 61:1996). | |
| GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGIST RATION OF QUALITY SYSTEMS. (ISO/IEC GUIDE 62:1996). | |
| GENERAL REQUIREMENTS FOR BODIES OPERATING PRODUCT CERTIFICATION SYSTEMS. (ISO/IEC GUIDE 65:1996). | |
| GENERAL TERMS AND THEIR DEFINITIONS CONCERNING STANDARDIZATION AND RELated activities. | |
| Grout for prestressing tendons - Basic requirements | |
| Grout for prestressing tendons - Grouting procedures | |
| Grout for prestressing tendons - Test methods | |
| GROUT FOR PRESTRESSING TENDONS. GROUTING PROCEDURES. | |
| GROUT FOR PRESTRESSING TENDONS. SPECIFICATION FOR COMMON GROUT. | |
| GROUT FOR PRESTRESSING TENDONS. TEST METHODS. | |
| Guide for procurement of power station equipment - Part 2-2: Electrical equipment - Uninterruptible power supplies | |
| Guide for procurement of power station equipment - Part 2-4: Electrical equipment - High power static convertors | |
| Guide for procurement of power station equipment - Part 2-4: Electrical equipment - Stationary batteries and chargers | |
| Guide for procurement of power station equipment - Part 2-5: Electrical equipment - Motors | |
| Guide for procurement of power station equipment - Part 2-6: Electrical equipment - Generators | |
| Guide for procurement of power station equipment - Part 2-7: Electrical equipment - Switchgear and controlgear | |
| Guide for procurement of power station equipment - Part 2-8: Electrical equipment - Power cables | |
| Guide for procurement of power station equipment - Part 3-1: Boilers - Water tube boilers | |
| Guide for procurement of power station equipment - Part 3-2: Boilers - Shell boilers | |
| Guide for procurement of power station equipment - Part 3-3: Boilers - Boilers with fluidized bed firing | |
| Guide for procurement of power station equipment - Part 4-4: Boiler auxiliaries - Fuel preparation equipment | |
| Guide for procurement of power station equipment - Part 4-5: Boiler auxiliaries - Coal handling and bulk storage plant | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 1: EQUIPMENT FOR REDUCTION OF DUST EMISSIONS. | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4: BOILER AUXILIARIES - SECTION 3: DRAUGHT PLANT | |
| Guide for procurement of power station equipment -- Part 2-9: Electrical equipment - Cabling systems (Endorsed by AENOR in December of 2011.) | |
| Guide for procurement of power station equipment -- Part 4-10: Boiler auxiliaries - Flue gas denitrification (De-NOx) plant. | |
| Guide for procurement of power station equipment -- Part 4-2: Boiler auxiliaries - Gas-air, steam-air and gas-gas heaters | |
| Guide for procurement of power station equipment -- Part 4-8: Boiler auxiliaries - Dust handling plant. | |
| Guide for procurement of power station equipment -- Part 4-9: Boiler auxiliaries - Sootblowers. | |
| Guide for procurement of power station equipment -- Part 4: Boiler auxiliaries - Section 6: Flue gas desulphurization (De-SOx) plant | |
| Guide for procurement of power station equipment -- Part 4: Boiler auxiliaries - Section 7: Ash handling plant | |
| Guide for procurement of power station equipment -- Part 6-4: Turbine auxiliaries - Pumps. | |
| Guide for procurement of power station equipment -- Part 6-5: Turbine auxiliaries - Dry cooling systems. | |
| Guide for procurement of power station equipment -- Part 6-6: Turbine auxiliaries - Wet and wet/dry cooling towers. | |
| Guide for procurement of power station equipment -- Part 6-9: Turbine auxiliaries - Cooling water systems. | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 5-1: STEAM TURBINES. | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 5-2: GAS TURBINES. | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 5-3: WIND TURBINES. | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 5-4: HYDRAULIC TURBINES, STORAGE, PUMPS AND PUMP-TURBINES. | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 6-3: TURBINES AUXILIARIES. CONDENSER PLANT. | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 6-7: TURBINE AUXILIARIES. MOISTURE SEPARATOR REHEATERS. | |
| Guide for procurement of power station equipment. Part 6-8: Turbine auxiliaries - Cranes | |
| GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT. PART 8-1: CONTROL AND INSTRUMENTATION. | |
| GUIDE FOR PROCUREMENT OF POWER STATION OF POWER STATION EQUIPMENT. PART 6-1: TURBINE AUXILIARIES. DEAERATORS. | |
| GUIDE FOR PROCUREMENT OF POWER STATION OF POWER STATION EQUIPMENT. PART 6-2: TURBINE AUXILIARIES. FEEDWATER HEATERS. | |
| Guide for procurement of power station plant, equipment, and systems - Part 7-1: Pipework and valves - High pressure piping systems | |
| Guide for procurement of power station plant, equipment, and systems - Part 7-2: Pipework and valves - Boiler and high pressure piping valves | |
| Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document (Endorsed by AENOR in April of 2016.) | |
| Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document (Endorsed by Asociación Española de Normalización in March of 2026.) | |
| Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document | |
| HEARING PROTECTORS. RECOMMENDATIONS FOR SELECTION, USE, CARE AND MAINTENANCE. GUIDANCE DOCUMENT. | |
| Helmets for fire fighting in buildings and other structures (Endorsed by AENOR in September of 2008.) | |
| Helmets for fire fighting in buildings and other structures | |
| HELMETS FOR FIREFIGHTERS. | |
| Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and for information to be provided by the manufacturer (Endorsed by AENOR in July... | |
| Medical gloves for single use - Part 1: Requirements and testing for freedom from holes | |
| Medical gloves for single use - Part 1: Requirements and testing for freedom of holes | |
| Medical gloves for single use - Part 2: Requirements and testing for physical properties | |
| Medical gloves for single use - Part 3: Requirements and testing for biological evaluation | |
| Medical gloves for single use - Part 4: Requirements and testing for shelf life determination | |
| MEDICAL GLOVES FOR SINGLE USE. PART 1: REQUIREMENTS AND TESTING FOR FREEDOM FROM HOLES. | |
| MEDICAL GLOVES FOR SINGLE USE. PART 1: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES (INCLUDING TECHNICAL CORRIGENDUM 1:1996). | |
| MEDICAL GLOVES FOR SINGLE USE. PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES. (INCLUDING CORRIGENDUM 1996). | |
| MEDICAL GLOVES FOR SINGLE USE. PART 2: REQUIREMENTS AND TESTING FOR PHYSICAL PROPERTIES. | |
| MEDICAL GLOVES FOR SINGLE USE. PART 3: REQUIREMENTS AND TESTING FOR BIOLOGICAL EVALUATION. | |
| Medical gloves for single use. Part 3: Requirements and testing for biological evaluation | |
| Method of testing fly ash - Part 1: Determination of free calcium oxide content | |
| Method of testing fly ash - Part 2: Determination of fineness by wet sieving | |
| METHOD OF TESTING FLY ASH. PART 1: DETERMINATION OF FREE CALCIUM OXIDE CONTENT. | |
| Method to achieve circular designs of products | |
| Methods for providing information relating to material efficiency aspects of energy-related products | |
| METROLOGICAL ASPECTS OF NON-AUTOMATIC WEIGHING INSTRUMENTS. | |
| Metrological aspects of non-automatic weighing instruments | |
| NON DESTRUCTIVE TESTING. IMAGE QUALITY OF RADIOGRAPHS. PART 4: EXPERIMENTAL EVALUATION OF IMAGE QUALITY VALUES AND IMAGE QUALITY TABLES. | |
| NON-DESTRUCTIVE TESTING. GENERAL PRINCIPLES FOR RADIOGRAPHIC EXAMINATION OF METALLIC MATERIALS BY X-AND GAMMA RAYS. | |
| NON-DESTRUCTIVE TESTING. IMAGE QUALITY OF RADIOGRAPHS. PART 1: IMAGE QUALITY INDICATORS (WIRE TYPE). DETERMINATION OF IMAGE QUALITY VALUE. | |
| NON-DESTRUCTIVE TESTING. IMAGE QUALITY OF RADIOGRAPHS. PART 2: IMAGE QUALITY INDICATORS (STEP/HOLE TYPE). DETERMINATION OF IMAGE QUALITY VALUE. | |
| NON-DESTRUCTIVE TESTING. IMAGE QUALITY OF RADIOGRAPHS. PART 3: IMAGE QUALITY CLASSES FOR FERREOUS METALS. | |
| NON-DESTRUCTIVE TESTING. IMAGE QUALITY OF RADIOGRAPHS. PART 5: IMAGE QUALITY INDICATORS (DUPLEX WIRE TYPE), DETERMINATION OF IMAGE UNSHARPNESS VALUE. | |
| PAINTS, VARNISHES AND RELATED PRODUCTS. DETERMINATION OF FLASHPOINT. RAPID EQUILIBRIUM METHOD. (ISO 3679, EDITION 1983, MODIFIED) | |
| PREINSULATED BONDED PIPE SYSTEMS FOR UNDERGROUND HOT WATER NETWORKS. FITTING ASSEMBLIES OF STEEL SERVICE PIPES, POLYURETHANE THERMAL INSULATION AND OUTER CASING OF POLYETHYLENE. (Endorsed by AENOR in January of 1995.)... | |
| Protective clothing - Protection against liquid and gaseous chemicals, including aerosols and solid particles - Test method: Determination of leak-tightness of gas-tight suits (Internal pressure test) | |
| PROTECTIVE CLOTHING FOR USE AGAINST LIQUID CHEMICALS. TEST METHOD: DETERMINATION OF RESISTANCE TO PENETRATION BY A JET OF LIQUID (JET TEST). | |
| QUALITY SYSTEMS. MEDICAL DEVICES. PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN 29001. | |
| QUALITY SYSTEMS. MEDICAL DEVICES. PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN 29002. | |
| QUALITY SYSTEMS. MEDICAL DEVICES. PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9001. | |
| QUALITY SYSTEMS. MEDICAL DEVICES. PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9002. | |
| QUALITY SYSTEMS. MEDICAL DEVICES. PARTICULAR REQUIREMENTS FOR THE APPLICATION OF EN ISO 9003 | |
| Radiators and convectors - Part 1: Technical specifications and requirements | |
| Radiators and convectors - Part 2: Test methods and rating | |
| RADIATORS AND CONVECTORS- PART 2: TEST METHODS AND RATING. | |
| Radiators and convectors. Part 1: Technical specifications and requirements. | |
| RADIATORS AND CONVECTORS. PART 2: TEST METHODS AND RATING. | |
| Radiators and convectors. Part 2: Test methods and rating | |
| RADIATORS AND CONVECTORS. PART 3: EVALUATION OF CONFORMITY. | |
| Railway applications - Fire protection on railway vehicles - Part 1: General | |
| Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behavior of materials and components | |
| Railway applications - Fire protection on railway vehicles - Part 2: Requirements for fire behaviour of materials and components | |
| Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers | |
| Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for rolling stock design | |
| Railway applications - Fire protection on railway vehicles - Part 5: Fire safety requirements for electrical equipment including that of trolley buses, track guided buses and magnetic levitation vehicles | |
| Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems | |
| Railway applications - Fire protection on railway vehicles - Part 7: Fire safety requirements for flammable liquid and flammable gas installations | |
| REFRIGERATED DISPLAY CABINETS. PART 5: TEMPERATURE TEST. (Endorsed by AENOR in November of 2000.) | |
| REFRIGERATED DISPLAY CABINETS. PART 6: CLASSIFICATION ACCORDING TO TEMPERATURE. | |
| REFRIGERATED DISPLAY CABINETS. PART 7: DEFROSTING TEST. | |
| REFRIGERATED DISPLAY CABINETS. PART 8: WATER VAPOUR CONDENSATION TEST. | |
| REFRIGERATED DISPLAY CABINETS. PART 9: ELECTRICAL ENERGY CONSUMPTION TEST. | |
| SAFETY OF MACHINERY. AUDITORY DANGER SIGNALS. GENERAL REQUIREMENTS, DESIGN AND TESTING. (ISO 7731:1986 MODIFIED). | |
| Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters). | |
| Specification for dedicated liquefied petroleum gas appliances - Domestic flueless space heaters (including diffusive catalytic combustion heaters) | |
| Specification for dedicated liquefied petroleum gas appliances - Flueless non-domestic space heaters not exceeding 10 kW | |
| SPECIFICATION FOR DEDICATED LIQUEFIED PETROLEUM GAS APPLIANCES. DOMESTIC FLUELESS SPACE HEATERS (INCLUDING DIFFUSIVE CATALYTIC COMBUSTION HEATERS). | |
| Standardization and related activities - General vocabulary (ISO/IEC Guide 2:2004) | |
| STANDARDIZATION AND RELATED ACTIVITIES. GENERAL VOCABULARY. (ISO/IEC GUIDE 2:1996). | |
| Swap bodies - Swap bodies of Class A - Dimensions and general requirements | |
| Wood preservatives - Determination of the preventive action against Hylotrupes bajulus (Linnaeus) - Part 1: Larvicidial effect (Laboratory method) (Endorsed by AENOR in August of 2006.) | |
| Wood preservatives - Determination of the preventive action against Hylotrupes bajulus (Linnaeus) - Part 1: Larvicidial effect (Laboratory method) | |
| Wood preservatives - Determination of the preventive action against Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) | |
| Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 1: Application by surface treatment (laboratory method) | |
| Wood preservatives - Determination of the preventive action against recently hatched larvae of Hylotrupes bajulus (Linnaeus) - Part 2: Ovicidal effect (laboratory method) | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 1: General requirements and test methods (Endorsed by AENOR... | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 2: Performance requirements for apparatus used for exposure measurement... | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 3: Performance requirements for apparatus used for general gas... | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours - Part 4: Guide for selection, installation, use and maintenance (Endorsed... | |
| Workplace atmospheres - Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours -- Part 4: Guide for selection, installation, use and maintenance. | |
| Workplace atmospheres. Electrical apparatus used for the direct detection and direct concentration measurement of toxic gases and vapours. Part 1: General requirements and test methods. | |
| WORKPLACE ATMOSPHERES. ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS. PART 2: PERFORMANCE REQUIREMENTS FOR APPARATUS USED FOR MEASURING CONCENTRATIONS IN THE... | |
| WORKPLACE ATMOSPHERES. ELECTRICAL APPARATUS USED FOR THE DIRECT DETECTION AND DIRECT CONCENTRATION MEASUREMENT OF TOXIC GASES AND VAPOURS. PART 3: PERFORMANCE REQUIREMENTS FOR APPARATUS USED FOR MEASURING CONCENTRATIONS WELL ABOVE... |
| << Prev | Next >> |