CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| A discourse is a process of communication. ISO/TS 24617-5:2014 addresses how a discourse is structured in terms of its realization/presenta tion and content, and shows how its dual structure can... | |
| As part of a drive to provide international standards for language resource management, ISO/TS 24620-1:2015 on controlled natural language (CNL) sets out the principles of CNL and its utilization together... | |
| Defines in English and French 135 terms of structure, operating conditions, dimensions and geometry of the rollers, surface characteristics of plane and grooved rollers and balance. Alphabetical indices in English... | |
| Describes the four principles which form the basis of the recommendations given for the design of garments. Gives dimensions and design of sleeves, legs, garment jackets, and fasteners. | |
| Establishes a comparison of regulations on the requirements for devices to be installed into road vehicles and their trailers. May be applied in the lack of detailed specifications. | |
| Gives examples of the kinds of hazards associated with screw conveyors at danger points, in particular trapping and shearing points located between the moving screw and the fixed parts of... | |
| Gives guidance on methods of verifying sprocket dimensions specified in ISO 5613. Specifies those dimensions which should be measured to ensure compatibility between chain and sprocket. | |
| Gives instructions relating to the requesting and assignment of the WMI codes and WPMI codes according to ISO 3780 and ISO 4100. | |
| ISO 128-71:2010 specifies general principles and basic methods for the application of the simplified representation on mechanical engineering drawings. | |
| ISO 12812-2:2017 describes and specifies a framework for the management of the security of MFS. It includes - a generic model for the design of the security policy, - a... | |
| ISO 13399-201:2014 specifies a concept for the design of cutting items, limited to regular inserts, with the usage of the related properties and domains of values. It specifies a common... | |
| ISO 13399-203:2015 specifies a concept for the design of cutting items, limited to any kind of replaceable inserts for drilling, using related properties and domains of values. ISO 13399-203:2015 specifies... | |
| ISO 13399-50:2013 specifies a reference dictionary for reference systems for cutting tools, together with their descriptive properties and domains of values. ISO 13399-50:2013 specifies a reference dictionary containing: definitions and... | |
| ISO 14253-4:2010 outlines the main assumptions behind the theoretically ideal decision rules established in ISO 14253-1. It discusses why these rules have to be the default rules and what considerations... | |
| ISO 14505-1:2007 gives guidelines for the assessment of thermal stress inside vehicles used for land, sea and air operation. It offers information about the assessment of hot, cold as well... | |
| ISO 15143-3:2016 specifies the communication schema designed to provide mobile machinery status data from a telematics provider's server to third-party client applications via the Internet. The data are collected from... | |
| ISO 17929:2014 has been drawn up with the objective of ensuring the safety of amusement ride passengers, based on the international experience of manufacture and operation of such structures throughout... | |
| ISO 18234-10:2013 contains the definition of the TPEG Conditional Access Information (CAI) application. It enables dedicated conditional access data, such as management messages (e.g. Control Words and Entitlement Control Messages)... | |
| ISO 19139-2:2012 defines Geographic Metadata for imagery and gridded data (gmi) encoding. This is an XML Schema implementation derived from ISO 19115-2. | |
| ISO 22028-3:2012 specifies a family of scene-referred extended colour gamut RGB colour image encodings designated as reference input medium metric RGB (RIMM RGB). Digital images encoded using RIMM RGB can... | |
| ISO 9241-100:2010 enables users of standards related to software ergonomics to identify ergonomics standards particularly relevant to software development, gain an overview on the content of software-ergonomics standards, understand the... | |
| ISO TR 8550-1:2007 gives general guidance on the selection of an acceptance sampling system, scheme or plan. It does this principally in the context of standards that either already exist... | |
| ISO TS 18234-4:2006 establishes the method of delivering Road Traffic Messages within a TPEG service. The TPEG-RTM application is designed to allow the efficient and language independent delivery of road... | |
| ISO TS 18234-5:2006 describes the Public Transport Information (PTI) application, which is intended to cover all modes of public (i.e. collective) transport as well as inter-urban and intra-urban travel. The... | |
| ISO TS 18234-6:2006 establishes the method of location referencing used by TPEG applications such as TPEG-RTM or TPEG-PTI. TPEG applications are specified to contain all the information required by a... | |
| ISO TS 19127:2005 defines rules for the population and maintenance of registers of geodetic codes and parameters and identifies the data elements, in compliance with ISO 19135 and ISO 19111,... | |
| ISO TS 20825:2003 specifies the maximum allowable wear and the limit dimensions of worn components of in-use mechanical couplings, which, when respected, will ensure the safe operation on the road... | |
| ISO/DIS 22239-3:2017 specifies instructions for use as well as labelling requirements of child restraint systems (CRS) and vehicles equipped with the child seat presence and orientation detection system (CPOD) specified... | |
| ISO/TR 13136:2012 describes the identification of Shiga toxin-producing Escherichia coli (STEC) by means of the detection of the following genes: a) the major virulence genes of STEC, stx and eae; | |
| ISO/TR 14411-1:2017 describes the preparation of polydisperse spherical particles based on a picket fence of quasi-monodisperse reference materials, the characterization of its monodisperse components with acceptable uncertainty and the estimation... | |
| ISO/TR 23647:2010 specifies a gas chromatographic method for determining the wax content of crude, degummed, neutralized, winterized, and fully refined vegetable oils, such as sunflower, soybean, rapeseed, corn, and rice... | |
| ISO/TR 80001-2-7:2015 is to provide guidance to HDOs on self-assessment of their conformance against IEC 80001‑1. | |
| ISO/TR 80002-2:2017 applies to any software used in device design, testing, component acceptance, manufacturing, labelling, packaging, distribution and complaint handling or to automate any other aspect of a medical device... | |
| ISO/TR 80002-2:2017(E) applies to any software used in device design, testing, component acceptance, manufacturing, labelling, packaging, distribution and complaint handling or to automate any other aspect of a medical device... | |
| ISO/TR 8100-24:2016 provides a comparison of the requirements for door locks, buffers, governors, safeties and brakes covered by the major prescriptive safety standards: a) CEN EN 81‑1:1998+A3:2009; b) ASME A17.1-2010/CSA... | |
| ISO/TR 8124-8:2016 provides guidelines for the determination of the lowest age at which children start playing with toys in specific toy sub-categories and is primarily directed to manufacturers and agencies... | |
| ISO/TR 834-2:2009 establishes general principles for measuring the uniformity of furnace exposure of samples tested in accordance with the requirements of ISO 834-1. ISO/TR 834-2:2009 specifies the type and location... | |
| ISO/TR 834-3:2012 provides background and guidance on the use and limitations of the fire resistance test method and the application of the data obtained. It is designed to be of... | |
| ISO/TR 8550-2:2007 provides guidance for acceptance sampling of products that are supplied in lots and that can be classified as consisting of discrete items (i.e. discrete articles of product). Each... | |
| ISO/TR 8550-3:2007 provides guidance for acceptance sampling of products that are supplied in lots and that can be classified as consisting of discrete items (i.e. discrete articles of product). Each... | |
| ISO/TR 8713:2012 establishes a vocabulary of terms and the related definitions used in ISO TC22/SC21 standards. These terms are specific to the electric propulsion systems of electrically propelled road vehicles,... | |
| ISO/TR 9210:2017 provides guidelines for discharge measurements in meandering and braided rivers, and from bridges, following the provisions of ISO 748. | |
| ISO/TR 9212:2015 reviews the current status of direct and indirect bedload-measurement techniques. The methods are mainly based on grain size distribution of the bedload, channel width, depth, and velocity of... | |
| ISO/TR 9241-308:2007 gives guidelines for surface-conduction electron-emitter displays (SED). | |
| ISO/TR 9241-309:2008 gives guidelines for organic light‑emitting diode (OLED) displays. | |
| ISO/TR 9241-310:2010 provides a summary of existing knowledge on ergonomics requirements for pixel defects in electronic displays at the time of its publication. It also gives guidance on the specification... | |
| ISO/TR 9241-331:2012 establishes an ergonomic point of view for the optical properties of autostereoscopic displays (ASDs), with the aim of reducing visual fatigue caused by stereoscopic images on those displays. | |
| ISO/TR 945-2:2011 deals with the two-dimensional characterisation of graphite form and size in cast irons. A standard method for determining graphite form by image analysis had not been developed at... | |
| ISO/TR 945-3:2016 gives the designations, descriptions and reference micrographs of the matrix structures of cast irons. It applies to the following types of cast irons: - grey cast irons (Table... | |
| ISO/TR 9464:2008 provides guidance on the use of ISO 5167:2003 (all parts). ISO 5167:2003 is an International Standard for flow measurement based on the differential pressure generated by a constriction... | |
| ISO/TR 9686:2017 specifies a method for the determination of the mass fraction of carbon and/or sulfur in direct reduced iron by infrared measurement after high-frequency combustion. This method is applicable... | |
| ISO/TR 9824:2007 provides a synopsis of the methods of flow gauging that can be deployed in closed conduits flowing part full, i.e. with a free open water surface. This Technical... | |
| ISO/TS 10128:2009 specifies three methods for the adjustment of the digital content data that is input to a printing system to achieve consistency in the printed results among a number... | |
| ISO/TS 10303-325:2004 specifies the abstract test suite to be used in the conformance testing of implementations of ISO 10303-225. The following are within the scope of ISO/TS 10303-325:2004: the specification... | |
| ISO/TS 10303-35:2003 specifies the abstract test methods and requirements for conformance testing of an implementation of a language binding of the Standard Data Access Interface (SDAI). Since the SDAI is... | |
| ISO/TS 10303-5001:2010 provides guidance on the usage of ISO 10303-214 application reference model (ARM) for the scope and information requirements for the exchange of information between the applications that support... | |
| ISO/TS 10465-1:2007 describes the procedures for underground installation of flexible glass-reinforced thermosetting resin (GRP) pipes. It refers generally to GRP pipes as specified in the system standards ISO 10467 and... | |
| ISO/TS 10719:2016 specifies an infrared absorption method after combustion in an induction furnace for the determination of non-combined carbon content in cast irons. The method is applicable to non-combined carbon... | |
| ISO/TS 10797:2012 establishes methods for characterizing the morphology of single-wall carbon nanotubes (SWCNTs) and identifying the elemental composition of other materials in SWCNT samples, using transmission electron microscopy and chemical... | |
| ISO/TS 10798:2011 establishes methods to characterize the morphology, and to identify the elemental composition of catalysts and other inorganic impurities in raw and purified single-wall carbon nanotube (SWCNT) powders and... | |
| ISO/TS 10832:2009 specifies a method to evaluate the effects of pollutants on spore germination of a mycorrhizal fungus, Glomus mosseae. This direct acute toxicity bioassay allows the evaluation of potential... | |
| ISO/TS 10867:2010 provides guidelines for the characterization of single-wall carbon nanotubes (SWCNTs) using near infrared (NIR) photoluminescence (PL) spectroscopy. ISO/TS 10867:2010 provides a measurement method for the determination of the... | |
| ISO/TS 10891:2009 establishes: a set of requirements for container tags, which allow the transfer of information from a container to automatic processing systems by electronic means; a data coding system... | |
| ISO/TS 10974:2018 is applicable to implantable parts of active implantable medical devices (AIMDs) intended to be used in patients who undergo a magnetic resonance scan in 1,5 T, cylindrical (circular... | |
| ISO/TS 10993-19:2006 provides a compilation of parameters and test methods that can be useful for the identification and evaluation of the physico-chemical, morphological and topographical (PMT) properties of materials in... | |
| ISO/TS 10993-20:2006 presents an overview of immunotoxicology with particular reference to the potential immunotoxicity of medical devices. It gives guidance on methods for testing for immunotoxicity of various types of... | |
| ISO/TS 11059 IDF/RM 225:2009 describes a method for the enumeration of Pseudomonas spp. in milk and milk products. The method allows the isolation of all pigmented and non-pigmented psychrophilic Pseudomonas... | |
| ISO/TS 11251:2010 specifies a method for the characterization of volatile components in single-wall carbon nanotubes (SWCNTs) samples using evolved gas analysis/gas chromatograph mass spectrometry (EGA/GCMS). | |
| ISO/TS 11308:2011 provides guidelines for the characterization of SWCNT-containing samples by the use of TGA, performed in an air environment. Guidance is provided on purity assessment of SWCNT samples through... | |
| ISO/TS 11356:2011 specifies the relevant spray operation parameters for recording information necessary for traceability, and provides a basis for the development of systems for automatically collecting and reporting agricultural production... | |
| ISO/TS 11366:2011 applies to mineral oils used as lubricating oils and to control fluids used to lubricate steam, gas and combined cycle turbines in service. The lubricants considered in ISO/TS... | |
| ISO/TS 11405:2015 gives guidance on substrate selection, storage, and handling as well as essential characteristics of different test methods for quality testing of the adhesive bond between restorative dental materials... | |
| ISO/TS 11602-1:2010 gives requirements for the selection and installation of portable and wheeled fire extinguishers. It is intended as a companion to ISO/TS 11602-2. It is not applicable to permanently... | |
| ISO/TS 11602-2:2010 gives requirements for the selection and installation of portable and wheeled fire extinguishers. It is intended as a companion to ISO/TS 11602-1. It is not applicable to permanently... | |
| ISO/TS 11619:2014 specifies the requirements for flexible thermoplastic polyurethane tubing conveying compressed air, for use in the ambient temperature range from 23 °C to 60 °C, in sizes from 3... | |
| ISO/TS 11665-13:2017 specifies the different methods intended for assessing the radon diffusion coefficient in waterproofing materials such as bitumen or polymeric membranes, coatings or paints, as well as assumptions and... | |
| ISO/TS 11672:2016 collects the various designation and nomenclature schemes specified in International Standards for connectors and similar products standardized by ISO/TC 131/SC 4. It establishes a uniform nomenclature structure to... | |
| ISO/TS 11686:2017 provides common installation instructions for all connectors that have adjustable stud ends and O-ring sealing. Conformance with the requirements of this document will result in a considerable reduction... | |
| ISO/TS 11774:2011 provides a method for qualification of non-destructive testing (NDT) personnel, procedures, and equipment for specific non-destructive tests conducted in accordance with documented procedures established within a performance-based qualification... | |
| ISO/TS 11819-3:2017 specifies two tyres intended to serve as reference tyres when using the close-proximity (CPX) method specified in ISO 11819-2. The CPX method is a method for evaluating different... | |
| ISO/TS 11869|IDF/RM 150:2012 specifies a potentiometric method for the determination of the titratable acidity of natural yoghurt, flavoured yoghurt, fruit yoghurt, drinking yoghurt, fresh cheese with or without fruit, buttermilk... | |
| ISO/TS 11931:2012 provides requirements to describe the basic characteristics of nanoscale calcium carbonate in powder form relevant for applications in nanotechnology. It is intended to detail the material specification necessary... | |
| ISO/TS 11937 provides requirements to describe the basic characteristics of titanium dioxide in powder form relevant for applications in nanotechnology. It is intended to detail the materials specification necessary to... | |
| ISO/TS 11999-2:2015 describes compatibility for ensembles of firefighters personal protective equipment (PPE) to be used by firefighters, who are at risk of exposure to high levels of heat and/or flame... | |
| ISO/TS 12025:2012 provides methodology for the quantification of nano-object release from powders as a result of treatment, ranging from handling to high energy dispersion, by measuring aerosols liberated after a... | |
| ISO/TS 12512:2017 specifies a method for determining the initial specific ring stiffness of pipes having a nominal size of DN 2000 or larger, using segment test pieces cut from a... | |
| ISO/TS 12720:2014 provides guidance for the application of the general principles of sustainability in buildings and civil engineering works elaborated in ISO 15392. It shows the different actors involved with... | |
| ISO/TS 12747:2011 gives guidance to follow, as a minimum, in order to assess the feasibility of extending the service life of a pipeline system, as defined in ISO 13623, beyond... | |
| ISO/TS 12805:2011 provides guidance on the preparation of specifications for the characteristics of manufactured nano-objects and their measurement methods. This is intended to help ensure the delivery of products with... | |
| ISO/TS 12812-3:2017 specifies the interoperable lifecycle management of applications used in mobile financial services. As defined in ISO 12812‑1, an application is a set of software modules and/or data needed... | |
| ISO/TS 12812-4:2017 provides comprehensive requirements and recommendations, as well as specific use cases for implementation of interoperable mobile payments-to-persons. The emphasis is placed on the principles governing the operational functioning... | |
| ISO/TS 12812-5:2017 focuses on mechanisms by which a person ("consumer", "payer" or "business") uses a mobile device to initiate a payment to a business entity ("merchant" or "payee"). Such a... | |
| ISO/TS 12854 establishes an alternative method to ISO 14520-1:2006, 7.5.1.2 for determining design concentrations applicable to various gaseous extinguishants for Class B fuels other than heptane. | |
| ISO/TS 12869:2012 specifies a method for the detection and quantification of Legionella spp. and L. pneumophila using a quantitative polymerase chain reaction (qPCR). It specifies general methodological requirements, performance evaluation... | |
| ISO/TS 12901-2:2014 describes the use of a control banding approach for controlling the risks associated with occupational exposures to nano-objects, and their aggregates and agglomerates greater than 100 nm (NOAA),... | |
| ISO/TS 12901:2012 provides guidance on occupational health and safety measures relating to engineered nanomaterials, including the use of engineering controls and appropriate personal protective equipment, guidance on dealing with spills... | |
| ISO/TS 12911:2012 establishes a framework for providing specifications for the commissioning of building information modelling (BIM). It is applicable to any range of modelling of buildings and building-related facilities, from... | |
| ISO/TS 13004:2013 describes a method for substantiating a selected sterilization dose of 17,5, 20, 22,5, 27,5, 30, 32,5 or 35 kGy that achieves a sterility assurance level (SAL) of 10... | |
| ISO/TS 13131:2014 provides advice and recommendations on how to develop quality objectives and guidelines for telehealth services that use information and communications technologies (ICTs) to deliver healthcare over both long... | |
| ISO/TS 13399-100:2008 defines the principles and methods for creating unambiguous identifications and definitions of the items and their properties relating to cutting tools in computer-sensible dictionaries to be used for... | |
| ISO/TS 13399-150:2008 gives guidelines for the application of ISO 13399 as a whole, including guidance on the instantiation of the EXPRESS schema as described in ISO 13399-1, and the use... | |
| ISO/TS 13399-202:2015 specifies a concept for the design of cutting items, limited to any kind of irregular inserts, with the usage of the related properties and domains of values. It... | |
| ISO/TS 13399-204:2016 specifies a concept for the design of cutting items, limited to any kind of replaceable inserts for reaming, using related properties and domains of values. ISO/TS 13399-204:2016 specifies... | |
| ISO/TS 13399-2:2014 specifies a reference dictionary for cutting items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of cutting items and their... | |
| ISO/TS 13399-301:2013 specifies a concept for the design of tool items, limited to any kind of taps and dies, together with the usage of the related properties and domains of... | |
| ISO/TS 13399-302:2013 specifies a concept for the design of tool items, limited to any kind of drilling and countersinking tools with solid cutting edges, together with the usage of the... | |
| ISO/TS 13399-303:2016 specifies a concept for the design of tool items, limited to solid (non-indexable) end mills, with the usage of the related properties and domains of values. ISO/TS 13399-303:2016... | |
| ISO/TS 13399-304:2016 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole and non-indexable cutting edges, together with the usage of... | |
| ISO/TS 13399-305:2017 specifies a concept for the design of tool items, for all kinds of modular tooling systems with adjustable cartridges for boring, together with the usage of the related... | |
| ISO/TS 13399-307:2016 specifies a concept for the design of tool items, limited to any kind end mills for indexable inserts, together with the usage of the related properties and domains... | |
| ISO/TS 13399-308:2016 specifies a concept for the design of tool items, limited to any kind of milling cutters with arbor hole for indexable inserts, together with the usage of the... | |
| ISO/TS 13399-309:2016 specifies a concept for the design of turning tools for indexable inserts, together with the usage of the related properties and domains of values. ISO/TS 13399-309:2016 specifies a... | |
| ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains of values. ISO/TS 13399-310:2017 carbide tips, together with the usage of the related properties and domains... | |
| ISO/TS 13399-311:2016 specifies a concept for the design of tool items, for all kinds of solid reamers, together with the usage of the related properties and domains of values. ISO/TS... | |
| ISO/TS 13399-312:2016 specifies a concept for the design of tool items, limited to any kind of reamers for indexable cutting edges, together with the usage of the related properties and... | |
| ISO/TS 13399-3:2014 specifies a reference dictionary for tool items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of tool items and their... | |
| ISO/TS 13399-401:2016 specifies a concept for the design of adaptive items, limited to any kind of converters, extenders and reducers, together with the usage of the related properties and domains... | |
| ISO/TS 13399-405:2016 specifies a concept for the design of adaptive items, limited to any kind of collets, clamping sleeves and ferrules, together with the usage of the related properties and... | |
| ISO/TS 13399-4:2014 specifies a reference dictionary for adaptive items, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of adaptive items, with an... | |
| ISO/TS 13399-5:2014 specifies a reference dictionary for items used to assemble cutting tools, together with their descriptive properties and domains of values, containing definitions and identifications of the classes of... | |
| ISO/TS 13399-60:2014 specifies a reference dictionary for connection systems for cutting tools, together with their descriptive properties and domains of values, and the structure of interface codes containing definitions and... | |
| ISO/TS 13399-70:2016 is intended to be used for the design of tool layouts for the simulation and the documentation of cutting tool components and cutting tool assemblies. It can be... | |
| ISO/TS 13399-71:2016 determines the elements to be used for the creation of 2D documentation. The individual parts of documentation are drawing content, geometrical data, drawing frame and drawing header data... | |
| ISO/TS 13399-72:2016 defines the necessary text elements of a drawing frame and determines a standardized data exchange format. Therefore, the effort is reduced for the maintenance of documentation because the... | |
| ISO/TS 13399-80:2017 specifies the basic principles for the creation and exchange of simplified 3D models of cutting items, tool items, and adaptive items, using related properties and domains of values. | |
| ISO/TS 13434:2008 provides guidelines for the assessment of the durability of geosynthetics, the object of which is to provide the design engineer with the necessary information, generally defined as changes... | |
| ISO/TS 13471-1:2017 specifies procedures for determining the effect of temperature on tyre/road noise emission. Temperatures considered are tyre, road and ambient air temperatures. The noise emission for which this document... | |
| ISO/TS 13473-4:2008 describes the methods that are available to perform a spectral analysis of pavement surface profile signals. It specifies three possible methods for spatial frequency analysis (or texture wavelength... | |
| ISO/TS 13477:2013 provides guidance for assessing the use of fire zone models for calculating gas temperature and concentrations and smoke layer position due to fire within an enclosure. It contains... | |
| ISO/TS 13498:2011 establishes a method to determine the torsional yield strength and maximum torque of the implant body/connecting part joints of endosseous dental implant systems. This test is most appropriate... | |
| ISO/TS 13499:2014 presents a simple means for the exchange of multimedia data on impact tests between different laboratories. A format has been developed which defines a directory structure and the... | |
| ISO/TS 13530:2009 provides comprehensive guidance on within‑laboratory and between‑laboratory quality control for ensuring the production of results with a known level of accuracy in the analysis of waters. ISO/TS 13530:2009... | |
| ISO/TS 13582:2015 specifies the mandatory and optional information to be recorded in any registry of OIDs, using an information model. It specifies which parts of that information are to be... | |
| ISO/TS 13584-35:2010 defines the spreadsheet data structure for both dictionary and library, where CSV (comma separated values) format is used for ISO 13584 compliant dictionary and library exchange. The unique... | |
| ISO/TS 13605:2012 sets out a wavelength dispersive X-ray fluorescence procedure for the determination of silicon, aluminium, iron, calcium, magnesium, sodium, potassium, titanium, manganese, phosphorus and sulfur. The method is applicable... | |
| ISO/TS 13606-4:2009 describes a methodology for specifying the privileges necessary to access EHR data. This methodology forms part of the overall EHR communications architecture defined in ISO 13606‑1. ISO/TS 13606-4:2009... | |
| ISO/TS 13725:2016 specifies a method for the evaluation of the buckling load which a) takes into account a geometric model of the hydraulic cylinder, meaning it does not treat the... | |
| ISO/TS 13811:2015 provides guidelines for developing specifications aimed at reducing the negative impacts and increasing the positive impacts of accommodation establishments on the environment. ISO/TS 13811:2015 does not apply to... | |
| ISO/TS 13830:2013 provides guidance on the content of voluntary labels for consumer products containing manufactured nano-objects. | |
| ISO/TS 13896:2012 specifies a method for the determination of linear alkylbenzene sulfonate (LAS) in sludge, treated biowaste and soil using high-performance liquid chromatography (HPLC) with a fluorescence detector (FLD) or... | |
| ISO/TS 13899-1:2004 specifies an inductively coupled plasma atomic emission spectrometric method for the determination of molybdenum content in steel. The method is applicable to molybdenum contents between 0,03 % (mass... | |
| ISO/TS 13899-1:2005 specifies a method for the determination of tungsten content in steel by means of inductively coupled plasma atomic emission spectrometry. | |
| ISO/TS 13907:2012 specifies a method for the determination of nonylphenols (NP), nonylphenol-monoetho xylates (NP1EO) and nonylphenol-diethoxy lates (NP2EO) in sludge, treated biowaste and soil using GC-MS. For sludge, a limit... | |
| ISO/TS 13972:2015: Describes requirements and recommended methods against which clinicians can gather, analyse and, specify the clinical context, content, and structure of Detailed Clinical Models. Defines Detailed Clinical Models (DCMs)... | |
| ISO/TS 14027:2017 provides principles, requirements and guidelines for developing, reviewing, registering and updating PCR within a Type III environmental declaration or footprint communication programme based on life cycle assessment (LCA)... | |
| ISO/TS 14033:2012 supports the application of standards and reports on environmental management. It provides guidelines on how to acquire quantitative environmental information and data and implement methodology. It gives guidelines... | |
| ISO/TS 14071:2014 provides additional specifications to ISO 14040:2006 and ISO 14044:2006. It provides requirements and guidelines for conducting a critical review of any type of LCA study and the competencies... | |
| ISO/TS 14072:2014 provides additional requirements and guidelines for an effective application of ISO 14040 and ISO 14044 to organizations. This Technical Specification details ? the application of Life Cycle Assessment... | |
| ISO/TS 14101:2012 provides guidelines for the identification of the surface bound molecules using FT-IR of dehydrated gold nanoparticle (AuNPs) films both before and after nanomaterial (NM) cytotoxicity testing. | |
| ISO/TS 14198:2012 provides procedures that can be used as a secondary task in a dual task setting to determine whether that evaluation setting is standardized and valid for purposes of... | |
| ISO/TS 14256-1:2003 describes a method for the determination of nitrate, nitrite and ammonium in a 1 mol/l potassium chloride extract of field-moist soil samples. ISO/TS 14256-1:2003 is applicable to all... | |
| ISO/TS 14265:2011 defines a set of high-level categories of purposes for which personal health information can be processed. This is in order to provide a framework for classifying the various... | |
| ISO/TS 14441:2013 examines electronic patient record systems at the clinical point of care that are also interoperable with EHRs. ISO/TS 14441:2013 addresses their security and privacy protections by providing a... | |
| ISO/TS 14649-201:2011 specifies the technology-specific machine tool description data elements needed as process data for manufacturing and machine characteristics. The machine tool descriptions covered in this schema are, initially, milling... | |
| ISO/TS 14837-31:2017 gives guidelines to encourage reporting of field measurements of ground-borne noise and vibration in a metric that allows international comparison and future development of empirical models. It also... | |
| ISO/TS 14837-32:2015 provides guidance and defines methods for the measurement of dynamic properties of the ground through which ground-borne noise and vibration is transmitted, from the operation of rail systems... | |
| ISO/TS 14907-1:2015 specifies the test procedures of EFC roadside equipment (RSE) and on-board equipment (OBE) with regard to the conformance to standards and requirements for type approval and acceptance testing... | |
| ISO/TS 14907-2:2016 describes tests that verify on-board unit (OBU) conformance of implementations of functions and data structures, as defined in the implementation conformance statement based on ISO 14906:2011/Amd1:2015 , for... | |
| ISO/TS 14909:2012 specifies the main characteristics and test methods of new high modulus polyethylene (HMPE) fibre ropes used for offshore stationkeeping. | |
| ISO/TS 15007-2:2014 gives guidelines on equipment and procedures for analysing driver visual behaviour, intended to enable assessors of transport information and control systems (TICS) to plan evaluation trials; specify (and... | |
| ISO/TS 15011-6:2012 provides guidance on determination of emission rates of fume and gases generated by spot welding of uncoated and coated steel sheets, expressed as the quantity of pollutants per... | |
| ISO/TS 15066:2016 specifies safety requirements for collaborative industrial robot systems and the work environment, and supplements the requirements and guidance on collaborative industrial robot operation given in ISO 10218‑1 and... | |
| ISO/TS 15216-2:2013 describes a method for qualitative detection of HAV and NoV genogroups I (GI) and II (GII), from test samples of foodstuffs or food surfaces. Following liberation of viruses... | |
| ISO/TS 15311-1:2016 defines print metrics, measurement methods and reporting requirements for printed sheets that are suitable for all classes of printed products. Guidance as to which of these metrics to... | |
| ISO/TS 15338:2009 gives guidelines for the operation of glow discharge mass spectrometry (GD‑MS) instruments and recommendations for the use of GD‑MS. It is intended to be read in conjunction with... | |
| ISO/TS 15495 IDF/RM 230 gives guidance for the quantitative determination of melamine and cyanuric acid content in milk, powdered milk products, and infant formulae by electrospray ionization liquid chromatography tandem... | |
| ISO/TS 15530-1:2013 provides an overview of the ISO 15530 series. It discusses the metrological characteristics of coordinate measuring machines (CMMs), the sources of task-specific uncertainty, and the relationship between the... | |
| ISO/TS 15530-4:2008 specifies requirements (for the manufacturer and the user) for the application of (simulation-based) uncertainty evaluating software (UES) to measurements made with coordinate measuring machines (CMMs), and gives informative... | |
| ISO/TS 15638-13:2015 addresses the provision of ?Mass (4.37) information for jurisdictional control and enforcement' and specifies the form and content of such data required to support such systems and access... | |
| ISO/TS 15638-19:2013 addresses the provision of ?Vehicle Parking Facility' and specifies the form and content of such data required to support such systems, and access methods (4.2) to that data. | |
| ISO/TS 15638-9:2013 addresses the provision of Remote Tachograph Monitoring and specifies the form and content of such data required to support such systems, and access methods to that data. ISO/TS... | |
| ISO/TS 15666:2003 provides specifications for socio-acoustic surveys and social surveys which include questions on noise effects (briefly referred to hereafter as "social surveys"). Its scope includes questions to be asked,... | |
| ISO/TS 15686-9:2008 gives guidance for the derivation and presentation of reference service-life data. It is applicable to manufacturers or producers that provide reference service-life data for use in service-life planning... | |
| ISO/TS 15694:2004 specifies methods for measuring single shocks at the handle(s) of hand-held and hand-guided machinery characterized by a maximum strike rate below 5 Hz. ISO/TS 15694:2004 also defines additional... | |
| ISO/TS 15696:2012 establishes a list of equivalent terms in English, French and Russian, drawn from the most commonly used terms in the field of cranes and defined or listed in... | |
| ISO/TS 15791-2:2017 provides guidelines and specifies requirements for the development and use of intermediate-scale fire tests applicable to semi-finished and finished products made of, or containing, plastics. ISO/TS 15791-2:2017 covers... | |
| ISO/TS 15827:2007 describes test procedures for evaluating the effects of the interactions between driver frontal airbags or side airbags (excluding curtains) and small female arms. It recommends dummies, procedures, instrumentation... | |
| ISO/TS 15883-5:2005 includes the test soils and methods that can be used to demonstrate the cleaning efficacy of washer-disinfectors (WD) according to the ISO 15883 series of standards. The inclusion... | |
| ISO/TS 15923-2:2017 specifies methods for the automatic determination of chromium(VI), fluoride, total alkalinity, total hardness, calcium, magnesium, iron, iron(II), manganese and aluminium with photometric determination using a discrete analysis system. | |
| ISO/TS 15926-11:2015 defines a methodology for simplified industrial usage of reference data as defined in ISO/TS 15926-4 and is applicable to the plant life cycle phases in the process industry... | |
| ISO/TS 15926-4:2007 defines the initial set of reference data for use with the ISO 15926 and ISO 10303-221 industrial data standards. | |
| ISO/TS 15926-6:2013 defines a methodology for the stewarding of reference data for process plants. | |
| ISO/TS 15926-7:2011 is a specification for data exchange and life-cycle information integration using templates based on the data model of ISO 15926-2. ISO/TS 15926-7:2011 provides a methodology for data integration... | |
| ISO/TS 15926-8:2011 is a specification for data exchange and life-cycle information integration using Resource Description Framework (RDF) and Web Ontology Language (OWL). ISO/TS 15926-8:2011 provides rules for implementing the upper... | |
| ISO/TS 15998-2:2012 assists in the interpretation and application of the performance criteria and tests of functional safety for electronic machine control systems (MCS), used on earth-moving machinery, given in the... | |
| ISO/TS 16058:2004 addresses the technical and system components of the telehealth reference architecture for telelearning systems. It does so by defining technical requirements to be satisfied for a compliant telelearning... | |
| ISO/TS 16095:2014 defines - the physical and chemical tests on raw reclaimed natural rubber, and - the standard materials, standard test formulations, equipment, and processing methods for evaluating the vulcanization... | |
| ISO/TS 16096:2014 specifies - physical and chemical tests on raw reclaimed isobutene-isoprene (IIR) rubber, and - standard materials, standard test formulations, equipment, and processing methods for evaluating the vulcanization characteristics... | |
| ISO/TS 16097:2013 specifies physical and chemical tests, standard test formulations, equipment and processing methods for the vulcanization-charac teristics evaluation and the mechanical properties of vulcanized crumb rubber. It is not... | |
| ISO/TS 16179:2012 specifies a test method for determining the presence of organotin compounds. This test method is applicable to all types of footwear materials. | |
| ISO/TS 16181:2011 specifies a test method to determine the presence of phthalate compounds. This test method is applicable to all types of footwear materials. | |
| ISO/TS 16186:2012 gives a test method for determining the amounts of dimethyl fumarate (DMFU) in footwear materials, dessicant sachets and other commodities. The test method is not applicable to metal... | |
| ISO/TS 16189:2013 specifies a method to determine the amounts of dimethylformamide (DMFo) in footwear and footwear components containing polyurethane (PU) coated material. | |
| ISO/TS 16190:2013 specifies a method to determine the amounts of polycyclic aromatic hydrocarbons (PAH) in footwear and footwear components. | |
| ISO/TS 16195:2013 provides guidance for developing representative test materials consisting of nano-objects in dry powder form, to enable test method development and improve comparability of data for nanotechnology applications. This... | |
| ISO/TS 16277-1:2015 defines a categorial structure for clinical findings in terminological systems for Traditional Chinese Medicine, Traditional Japanese Medicine, and Traditional Korean Medicine (TM-CJK). This Technical Specification defines three subcategories:... | |
| ISO/TS 16281:2008 contains recommendations for the calculation of the modified reference rating life taking into consideration lubrication, contamination and fatigue load limit of the bearing material, as well as tilting... | |
| ISO/TS 16460:2016 specifies the following: - the Localized Message (LM) format: an NPDU of a networking and transport layer protocol that does not support routing of a packet through a... | |
| ISO/TS 16479:2012 determines the slow cracking resistance of pipes and fittings using the Notched Ring Test (NRT) which is a method for determining the slow crack resistance of thermoplastics resins... | |
| ISO/TS 16489:2006 describes statistical procedures to test the equivalency of results obtained by two different analytical methods used in the analysis of waters. It is not applicable for establishing whether... | |
| ISO/TS 16491:2012 gives guidance on the practical applications of the principles of performance measurement of air-cooled air-conditioners and air-to-air heat pumps as described in ISO 5151, ISO 13253, and ISO... | |
| ISO/TS 16506:2017 specifies test methods and information of bond strength to dentine and physical and chemical performances of dental polymer-based luting materials containing adhesive components. The materials are supplied in... | |
| ISO/TS 16550:2014 provides a test method for evaluating potency of silver nanoparticles to cell wall degradation of Staphylococcus aureus and muramic acid release as quantified by a gas chromatography-mass spectrometry... | |
| ISO/TS 16558-2:2015 specifies a method for the quantitative determination of the total extractable semi-volatile, aliphatic, and aromatic fractions of petroleum hydrocarbon content in field moist soil samples by gas chromatography. | |
| ISO/TS 16610-32:2009 specifies the characteristics of robust spline filters for surface profiles. It specifies in particular how to separate the long and short wave content of a surface profile. | |
| ISO/TS 16688:2017 establishes a system to select coating types for architectural applications depending on environment. It gives guidelines for the selection of tests and methods of measuring performance in terms... | |
| ISO/TS 16697:2012 provides a method to determine the oxygen concentration threshold when a material exposed to a standard ignition source self-extinguishes at a given constant total pressure, temperature, convective flow,... | |
| ISO/TS 16727:2013 specifies a method for the determination of mercury in aqua regia or nitric acid digests of sludge, treated biowaste and soil, obtained according to ISO 11466 or ISO... | |
| ISO/TS 16751:2018 specifies an extraction method to determine the bioavailable (potential and environmental available) fraction and the non-bioavailable fraction of a contaminant in soil using a "receiver phase" for an... | |
| ISO/TS 16774-1:2017 specifies a laboratory test method for evaluating the thermal stress resistance of water-leakage crack repair materials through permeability testing. The repair material injected into a test specimen with... | |
| ISO/TS 16774-3:2016 specifies a laboratory test method on the quantitative determination of repair material's performance and resistance against erosion and wash out due to underground water flow. | |
| ISO/TS 16774-5:2017 specifies a laboratory test method for evaluating watertightness of water-leakage crack repair materials through permeability testing. These permeability test procedures follow applied conditions outlined in different national testing... | |
| ISO/TS 16774-6:2017 specifies a laboratory test method for evaluating the substrate (crack) movement response of water-leakage crack repair materials through permeability testing. The repair material injected into a test specimen... | |
| ISO/TS 16774:2016 specifies a laboratory test method for indirectly measuring the adhesion performance of repair material to wet concrete crack surfaces by qualitatively, as a pass/fail at predetermined time, against... | |
| ISO/TS 16775:2014 provides guidance for the application of the requirements contained in ISO 11607‑1 and ISO 11607‑2. It does not add to, or otherwise change, the requirements of ISO 11607‑1... | |
| ISO/TS 16780:2015 specifies a method for the determination of polychlorinated naphthalenes (PCNs), where "poly" means "mono" to "octa", in waters and waste waters [containing less than 2 g/l solid particulate... | |
| ISO/TS 16782:2016 provides a standard description of the physical properties of dehydrated Mueller-Hinton broth (dMHB) and Mueller-Hinton agar (dMHA) and performance criteria by which manufacturers can assess the performance characteristics... | |
| ISO/TS 16785:2014 defines an application interface between DSRC-based OBE and external in-vehicle devices to make DSRC-OBE applicable for diversified tolling environment. | |
| ISO/TS 16791:2014 provides guidance on identification and labelling of medicinal products from the point of manufacture of packaged medicinal product to the point of dispensing the product. ISO/TS 16791:2014 outlines... | |
| ISO/TS 16840-11:2014 specifies a method for determining the dissipation characteristics of simulated perspiration exposure on wheelchair seat cushions. ISO/TS 16840-11:2014 is applicable to wheelchair seat cushions that include a cushion... | |
| ISO/TS 16840-12:2015 specifies apparatus, test methods, and disclosure requirements for characterization of wheelchair seat cushion immersion and envelopment properties using instrumented indenters to characterize the interface pressure of each indenter... | |
| ISO/TS 16843-1:2016 specifies the categorial structure within the subject field of acupuncture by defining a set of domain constraints of sanctioned characteristics each composed of a semantic link and an... | |
| ISO/TS 16843-3:2017 aims to specify categorial structure in the field of moxibustion by defining a set of domain constraints for use within terminological resources. ISO/TS 16843-3:2017 describes a concept system... | |
| ISO/TS 16843-4:2017 specifies the categorial structure within the subject field of meridian and collateral by defining a set of domain constraints of sanctioned characteristics, each composed of a semantic link... | |
| ISO/TS 16901:2015 provides a common approach and guidance to those undertaking assessment of the major safety hazards as part of the planning, design, and operation of LNG facilities onshore and... | |
| ISO/TS 16951:2004 provides formal procedures and two alternative methods for determining the priority of on-board messages presented to drivers of road vehicles by transport information and control systems (TICS), and... | |
| ISO/TS 16955:2016 describes quantitative methods to evaluate or assess key performance indicators of prosthetic ankle foot devices. For each method, the set-up and test configurations are described. Also included is... | |
| ISO/TS 16965:2013 specifies a method for the determination of the following elements in aqua regia or nitric acid digests or other extraction solutions of sludge, treated biowaste and soil: Aluminium... | |
| ISO/TS 16973:2016 specifies the classification of Respiratory Protective Devices based on their performance. The performance requirements are given in the relevant performance standards. | |
| ISO/TS 16974:2011 gives guidance on the marking to be used on respiratory protective devices (RPD) and the information to be supplied by the manufacturer/supplie r. | |
| ISO/TS 16975-2:2016 provides brief guidance to assist persons responsible for establishing and implementing a programme for respiratory protective devices (RPD) that meet the performance requirements. There are special applications where... | |
| ISO/TS 16976-1:2015 provides information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for performance requirements, testing, and use of respiratory protective devices. This... | |
| ISO/TS 16976-2:2015 is one part of a series of Technical Specifications that provide information on factors related to human anthropometry, physiology, ergonomics, and performance for the preparation of standards for... | |
| ISO/TS 16976-3:2011 gives: a description of the factors contributing to the present content of the Earth's atmosphere; a description of the physiology of human respiration; a survey of the current... | |
| ISO/TS 16976-4:2012 describes how to calculate the work performed by a person's respiratory muscles with and without the external respiratory impediments that are imposed by RPD of all kinds, except... | |
| ISO/TS 16976-5:2013 is one of a series of Technical Specifications that provide information on factors related to human anthropometry, physiology, ergonomics and performance for the preparation of standards for design,... | |
| ISO/TS 16976-6:2014 provides information on the psycho-physiological effects related to the wearing of respiratory protective devices (RPD) and it is intended for the preparation of standards for selection and use... | |
| ISO/TS 16976-7:2013 contains information related to the interaction between respiratory protective devices and the human body functions of hearing and speech. | |
| ISO/TS 16976-8:2013 gives guidance on the generic ergonomic factors for the preparation of standards for performance requirements, testing and use of respiratory protective devices (RPD). It specifies principles relating to:... | |
| ISO/TS 16996:2015 specifies the procedure for a determination of major and minor element concentrations in biomass material by energy dispersive X-ray fluorescence (EDXRF) spectrometry or wavelength dispersive X-ray fluorescence (WDXRF)... | |
| ISO/TS 17104:2006 specifies a laboratory performance test method for hydraulic impulse tools for installing threaded fasteners. It gives instructions on the procedure, performance parameters to test, how to evaluate and... | |
| ISO/TS 17137:2014 outlines design verification and validation considerations for absorbable cardiovascular implants. ISO/TS 17137:2014 is applicable to implants in direct contact with the cardiovascular system, where the intended action is... | |
| ISO/TS 17165-2:2018 provides guidelines for selection, routing, fabrication, installation, replacement, maintenance and storage of hose and hose assemblies for hydraulic fluid power systems which are manufactured from hoses conforming to... | |
| ISO/TS 17182:2014 describes the gas chromatographic determination of phenols, methyl phenols, di-methylphenols and tri-methylphenols (see Table 1) and selected chlorophenols (see Table 2) by using mass spectrometric detection in soil... | |
| ISO/TS 17187:2013 provides governance rules to be used for executing an organized process for business entities to connect to one another electronically for the conduct of electronic trade in a... | |
| ISO/TS 17193¦IDF/RM 208:2011 specifies a photometric method for the determination of the lactoperoxidase activity in milk in amounts exceeding 50 U/l. | |
| ISO/TS 17200:2013 lists fundamental characteristics which are commonly determined for nanoparticles in powder form. ISO/TS 17200:2013 prescribes specific measurement methods for each of these characteristics. | |
| ISO/TS 17225-8:2016 determines the fuel quality classes and specifications of graded densified solid biofuels produced from thermally treated biomass for non-industrial and industrial use. This document covers pellets and briquettes... | |
| ISO/TS 17242:2014 provides a procedure to calibrate seat belt force transducers with loading capacities up to 25 kN and consistent test specifications and sequences in order to improve comparability of... | |
| ISO/TS 17251:2016 specifies the business requirements for the structured content of structured or semi-structured dose instructions for recording dose instructions in the electronic health record (EHR), supporting clinical decision support,... | |
| ISO/TS 17306:2016 establishes a methodology for quantitative determination of free glycerol, mono-, di-, triacylglycerols and total glycerol by gas chromatography in biodiesel produced from any raw material including coconut or... | |
| ISO/TS 17307:2016 establishes a method for determining the total methyl ester content in fatty acid methyl ester (FAME) by gas chromatography and using an external standard. The method is suitable... | |
| ISO/TS 17321-4:2016 specifies requirements for a programmable light emission system to produce various spectral radiance distributions intended for DSC colour characterization applications. NOTE 1 Evaluation metrics are described in this... | |
| ISO/TS 17379-1:2013 specifies a method for the determination of selenium. The method is applicable to drinking water, surface water, ground water, and rain water. The application range of ISO/TS 17379-1:2013... | |
| ISO/TS 17379-2:2013 specifies a method for the determination of selenium. The method is applicable to drinking water, surface water, ground water, and rain water. The dynamic range of ISO/TS 17379-2:2013... | |
| ISO/TS 17383:2014 describes the procedure for the capillary gas chromatographic determination of the qualitative and semi-quantitative composition of individual triglycerides of fats, oils, and fat mixtures. The separation of the... | |
| ISO/TS 17425:2016 specifies the In-Vehicle Signage service and application that delivers In-Vehicle Signage information to ITS stations (vehicle ITS stations or personal ITS stations devices) concerning road and traffic conditions,... | |
| ISO/TS 17426:2016 - specifies the Contextual Speed Information Service, namely the general requirements regarding the provision of the Contextual Speed Information Service, the data flow supporting the service, and the... | |
| ISO/TS 17429:2017 specifies generic mechanisms enabling the exchange of information between ITS stations for applications related to Intelligent Transport Systems. It complies with the ITS station reference architecture (ISO 21217)... | |
| ISO/TS 17431:2006 specifies an intermediate-scale test method that simulates a fire that under well-ventilated conditions starts in a corner of a small room with a single doorway and can develop... | |
| ISO/TS 17439:2014 provides details of the metadata and requirements for quality terms and definitions in health informatics for inclusion in health informatics glossaries. ISO/TS 17439:2014 does not cover specification of... | |
| ISO/TS 17444-1:2017 defines metrics for the charging performance of electronic fee collection (EFC) systems in terms of the level of errors associated with charging computation. ISO/TS 17444-1:2017 is a toolbox... | |
| ISO/TS 17444-2:2017 defines the Examination Framework for the measurement of charging performance metrics defined in ISO/TS 17444‑1 to be used during Evaluation and/or on-going Monitoring. It specifies a method for... | |
| ISO/TS 17451-2:2017 specifies a common XML structure for the transmission of inventory information for shipments of household goods and personal effects between moving companies and their external partners. The Inventory... | |
| ISO/TS 17466:2015 provides guidelines for estimating the diameter and the number concentration of monodisperse cadmium chalcogenide (CdTe, CdSe, CdS) quantum dots (QDs) with a narrow size distribution in a colloidal... | |
| ISO/TS 17503:2015 describes the estimation of uncertainties on the mean value in experiments conducted as crossed designs, and the use of variances extracted from such experiments and applied to the... | |
| ISO/TS 17518:2015 provides requirements and guidance for selecting and assessing the quality of reagents to be used for in vitro diagnostic staining in biology. This Technical Specification applies to the... | |
| ISO/TS 17536-2 defines standardized and repeatable test procedures for the evaluation of blowby oil aerosol separators and filtering devices and specifies laboratory gravimetric separation efficiency and system pressure tests in... | |
| ISO/TS 17536-3:2014 defines standardized and repeatable test procedures by using internal combustion engines for the evaluation of blowby oil aerosol separators and specifies engine gravimetric separation efficiency and system pressure... | |
| ISO/TS 17574:2017 provides guidelines for preparation and evaluation of security requirements specifications, referred to as Protection Profiles (PP) in ISO/IEC 15408 (all parts) and in ISO/IEC TR 15446. By Protection... | |
| ISO/TS 17582:2014 specifies requirements for a quality management system where an electoral organization needs to demonstrate its ability to manage elections by secret ballot, which provide reliable, transparent, free and... | |
| ISO/TS 17665-2:2009 provides general guidance on the development, validation and routine control of moist heat sterilization processes and is intended to explain the requirements set forth in ISO 17665-1. The... | |
| ISO/TS 17665-3:2013 provides guidance about the attributes of a medical device to be considered by the user when assigning a medical device to a product family for the purpose of... | |
| ISO/TS 17728:2015 applies to the collection of samples before submission to the laboratory for microbiological examination. It provides general instructions and specific requirements for obtaining samples and for transport to... | |
| ISO/TS 17758 IDF/RM 87:2014 specifies a method for the determination of the dispersibility in water of instant dried milk. The method is applicable to instant dried skimmed milk manufactured by... | |
| ISO/TS 17774-2:2016 specifies a laboratory test method for the qualitative determination of the retention level of chemical resistance of repair materials in repaired cracks of concrete structures in conditions where... | |
| ISO/TS 17796: 2013 specifies a qualitative method of thermodesorption ? gas chromatography ? mass spectrometry (TD-GC-MS) for the identification of volatile components in rubber fumes, after trapping on a solid... | |
| ISO/TS 17822-1:2014 is intended for ? IVD medical device manufacturers, medical laboratories, and research and development laboratories that develop nucleic acid-based qualitative in vitro diagnostic examination procedures for the detection... | |
| ISO/TS 17863:2013 specifies the indication of constraint conditions in between the parts of movable assemblies in conjunction with tolerancing according to ISO GPS standards. On geometrical tolerancing, one part of... | |
| ISO/TS 17865:2016 describes how to evaluate the test value uncertainty when testing is performed according to ISO 10360‑5. | |
| ISO/TS 17892-11:2004 is intended for use in earthworks and foundation engineering. It specifies laboratory test methods to establish the coefficient of permeability of water through water-saturated soils. In the proposed... | |
| ISO/TS 17902:2016 specifies the definitions and requirements for wrapped electrofoaming joints for polyethylene (PE) piping systems with smooth outer wall for underground drains and sewer without pressure. ISO/TS 17902:2016 specifies... | |
| ISO/TS 17919:2013 specifies a horizontal method for the molecular detection of clostridia carrying botulinum neurotoxin A, B, E, and F genes by a PCR method. This method detects the genes... | |
| ISO/TS 17920:2015 specifies the main characteristics and test methods of new aramid fibre ropes used for offshore stationkeeping. | |
| ISO/TS 17938:2014 defines the structure of the semantic network by describing the semantic types and semantic relations of TCM language system. ISO/TS 17938:2014 is intended to: a) support establishment of... | |
| ISO/TS 17948:2014 defines the core set of TCM literature metadata, describes the principles and methods of TCM metadata, and specifies the formal description of TCM metadata. It applies to the... | |
| ISO/TS 17951-1:2016 specifies a method for the determination of fluoride in waters, waste waters and effluents by flow injection analysis (FIA). Any insoluble or complexed fluoride is converted to fluoride... | |
| ISO/TS 17951-2:2016 specifies a method for the determination of fluoride in waters, waste waters and effluents by continuous flow analysis (CFA). Any insoluble or complexed fluoride is converted to fluoride... | |
| ISO/TS 17958:2013 describes a method for determining the fracture toughness of paper and board using a tensile testing machine operated with a constant rate of elongation. ISO/TS 17958:2013 also describes... | |
| ISO/TS 17975:2015 defines the set of frameworks of consent for the Collection, Use and/or Disclosure of personal information by health care practitioners or organizations that are frequently used to obtain... | |
| ISO/TS 17988:2014 gives details of test procedures for evaluating the corrosion resistance of dental amalgam produced from a dental amalgam alloy product. It is applicable to dental amalgam formed from... | |
| ISO/TS 17996 IDF/RM 205:2006 describes a method for the determination of rheological properties by uniaxial compression at constant displacement rate in hard and semi-hard cheeses. The method provides standard conditions... | |
| ISO/TS 18062:2016 aims to a) specify the minimal characterizing generic concepts in herbal medicament (3.2) within terminological systems (3.8), that are required for terms used to identify of herbal medicines... | |
| ISO/TS 18083 IDF/RM 51:2013 specifies the calculation of the approximate content of phosphorus from added phosphate salts and phosphorus containing pH-regulating agents in processed cheese products. The method is applicable... | |
| ISO/TS 18090-1:2015 is directly applicable to pulsed X-radiation with pulse duration of 0,1 ms up to 10 s. This covers the whole range used in medical diagnostics at the time... | |
| ISO/TS 18110:2015 aims to provide the necessary definitions that specify the bounds of key innovation indicators as they relate to nanotechnology, in order to facilitate and unify the global assessment... | |
| ISO/TS 18152:2010 presents a human-systems (HS) model for use in ISO/IEC 15504-conformant assessment of the maturity of an organization in performing the processes that make a system usable, healthy and... | |
| ISO/TS 18166:2016 provides a workflow for the execution, validation, verification and documentation of a numerical welding simulation within the field of computational welding mechanics (CWM). As such, it primarily addresses... | |
| ISO/TS 18173:2005 defines the general technical terms that are used in many non-destructive testing disciplines. | |
| ISO/TS 18220:2016 specifies an early-life stage procedure for determination of the toxic effects of chemicals and water samples on a cold-water brackish water copepod species under semi-static conditions. The biological... | |
| ISO/TS 18223:2015 describes an inductively coupled plasma atomic emission spectrometric method for the determination of nickel content (mass fraction) between 20,0 % and 80,0 % in nickel alloys. Besides alloys... | |
| ISO/TS 18226:2006 describes the use of reinforced thermoplastics pipe (RTP) systems for transmission of gaseous fuels at maximum operating pressures up to and including 40 bars, and service temperatures in... | |
| ISO/TS 18234-11:2013 establishes the method of signalling the specific location referencing used by all TPEG1 applications that require detailed location information to be delivered to client devices such as TPEG1-RTM,... | |
| ISO/TS 18234-1:2013 provides an introduction and index to the complete set of TPEG Generation 1 toolkit components and applications. It allows the indexing of new applications as they are added... | |
| ISO/TS 18234-2:2013 establishes the method of referencing used within a TPEG data-stream to allow a service provider to signal availability of the same service on another bearer channel or similar... | |
| ISO/TS 18234-3:2013 establishes the method of delivering service and network information within a TPEG service. The TPEG-SNI application is designed to allow the efficient and language independent delivery of information... | |
| ISO/TS 18234-7:2013 specifies the TPEG Parking Information Application (PKI) which is designed to deliver parking information to a variety of receivers using a number of different channels, foremost digital broadcasting... | |
| ISO/TS 18234-8:2012 establishes a method for delivering Congestion and Travel Time Messages within a TPEG service. | |
| ISO/TS 18234-9:2013 defines the TPEG application Traffic Event Compact (TEC). It has been specifically designed to support information about traffic events, e.g. road works, traffic jams. A specific form of... | |
| ISO/TS 18339:2015 specifies the design of eyepiece cap and light guide connector of an endoscope to enable the combination of products from different manufacturers. The products intended only for limited... | |
| ISO/TS 18340:2015 specifies the design, testing and labelling of universal interchangeable and reusable trocar sleeves and trocar pins and of endotherapy devices which are inserted through these trocar sleeves. ISO/TS... | |
| ISO/TS 18344:2016 defines test methods and minimum requirements for paper deacidification processes regarding their effectiveness and consistency. It is applicable for all large scale processes which offer deacidification of acid... | |
| ISO/TS 18409:2018 specifies two methods for collecting a fluid sample to be used to analyse the cleanliness of hydraulic fluid power hoses or hose assemblies within a certain inside diameter... | |
| ISO/TS 18506:2014 provides a procedure to develop injury risk curves for biomechanical samples. These samples are often heavily censored and limited in size, such that specific steps and checks are... | |
| ISO/TS 18507:2015 provides a framework on the uses of Total Reflection X-Ray Fluorescence (TXRF) spectroscopy for elemental qualitative and quantitative analysis of biological and environmental samples. It is meant to... | |
| ISO/TS 18530:2014 outlines the standards needed to identify and label the Subject of Care (SoC) and the Individual Provider on objects such as wrist bands, identification tags or other objects,... | |
| ISO/TS 18571:2014 provides validation metrics and rating procedures to be used to calculate the level of correlation between two non-ambiguous signals obtained from a physical test and a computational model,... | |
| ISO/TS 18614:2016 provides guidelines for users and suppliers providing the required information for requesting and specifying self-adhesive labels. It provides what to consider when defining and specifying label materials to... | |
| ISO/TS 18625 is intended to be applicable to freight containers as defined in ISO 668 as well as to other freight containers not defined in ISO 668 and to container... | |
| ISO/TS 18667:2018 applies to the design, development, fabrication, test, and operation of commercial, civil, and military space and ground control systems, sites/facilities, services, equipment, and computer software. Criteria is provided... | |
| ISO/TS 18683:2015 gives guidance on the minimum requirements for the design and operation of the LNG bunkering facility, including the interface between the LNG supply facilities and receiving ship as... | |
| ISO/TS 18684:2015 concerns whole watches, in which all or some of the components of the external parts are made of hard material, with the exception of watch glasses. It applies... | |
| ISO/TS 18806:2014 specifies two methods (high temperature combustion and bomb combustion) for the determination of chlorine in solid mineral fuels. It is applicable to hard coals, brown coals, coke, and... | |
| ISO/TS 18867:2015 specifies two horizontal methods for detection of the pathogenic bioserotypes of Y. enterocolitica and one for detection of Y. pseudotuberculosis by using real-time PCR-based methods. The described methods... | |
| ISO/TS 18870:2014 details requirements for passenger carrying lifts, which are installed in buildings having a suitable comprehensive building evacuation strategy. It does not define building requirements that will have to... | |
| ISO/TS 18876 (all parts) establishes an architecture, a methodology and other specifications for integrating industrial data for exchange, access and sharing. Together these support the following activities: integrating data which... | |
| ISO/TS 18876:2003 establishes an architecture and methodology for integrating industrial data for exchange, access and sharing. The following activities are supported: integrating data which may be: from different sources or... | |
| ISO/TS 19022:2016 specifies a test method which allows predicting the aging rate of material specimens, e.g. plastics, under interest independent of the aging mechanisms as a function of radiant exposure. | |
| ISO/TS 19036:2006 gives guidance for the estimation and expression of measurement uncertainty (MU) associated with quantitative results in food microbiology. It is applicable to the quantitative analysis of products intended... | |
| ISO/TS 19046-1| IDF/RM 233-1:2017 specifies a method for the determination of propionic acid level in cheese, using gas chromatography. | |
| ISO/TS 19046-2 | IDF/RM 233-2:2017 specifies a method for the determination of propionic acid level in cheese, using ion exchange chromatography. | |
| ISO/TS 19072-4:2012 defines the general minimum specifications of a type 2 two-way connection interface, linking the pyrotechnic device and harness connector built into a road vehicle. A three-way with ground... | |
| ISO/TS 19091:2017 defines the message, data structures, and data elements to support exchanges between the roadside equipment and vehicles to address applications to improve safety, mobility and environmental efficiency. In... | |
| ISO/TS 19115-3:2016 defines an integrated XML implementation of ISO 19115‑1, ISO 19115‑2, and concepts from ISO/TS 19139 by defining the following artefacts: a) a set of XML schema required to... | |
| ISO/TS 19129:2009 defines the framework for imagery, gridded and coverage data. This framework defines a content model for the content type imagery and for other specific content types that can... | |
| ISO/TS 19130-2:2014 supports exploitation of remotely sensed images. It specifies the sensor models and metadata for geopositioning images remotely sensed by Synthetic Aperture Radar (SAR), Interferometric Synthetic Aperture Radar (InSAR),... | |
| ISO/TS 19139:2007 defines Geographic MetaData XML (gmd) encoding, an XML Schema implementation derived from ISO 19115. | |
| ISO/TS 19150-1:2012 defines the framework for semantic interoperability of geographic information. This framework defines a high level model of the components required to handle semantics in the ISO geographic information... | |
| ISO/TS 19157-2:2016 defines data quality encoding in XML. It is an XML schema implementation derived from ISO 19157:2013 and the data quality related concepts from ISO 19115‑2. | |
| ISO/TS 19158:2012 provides a framework for quality assurance specific to geographic information. It is based upon the quality principles and quality evaluation procedures of geographic information identified in ISO 19157... | |
| ISO/TS 19159-1:2014 defines the calibration and validation of airborne and spaceborne remote sensing imagery sensors. The term "calibration" refers to geometry, radiometry, and spectral, and includes the instrument calibration in... | |
| ISO/TS 19159-2:2016 defines the data capture method, the relationships between the coordinate reference systems and their parameters, as well as the calibration of airborne lidar (light detection and ranging) sensors. | |
| ISO/TS 19163-1:2016 classifies imagery and regularly spaced gridded thematic data into types based on attribute property, sensor type and spatial property, and defines an encoding-neutral content model for the required... | |
| ISO/TS 19218-1:2011 specifies requirements for a hierarchical coding structure for describing adverse events relating to medical devices. The codes are intended for use by medical device users, manufacturers, regulatory authorities,... | |
| ISO/TS 19218-2:2012 specifies requirements for a hierarchical coding structure for characterizing the results of the analysis or evaluation of adverse events relating to medical devices. The codes are intended primarily... | |
| ISO/TS 19256:2016 defines the required characteristics for any MPD-system to support use cases in healthcare. These characteristics include the medication concepts, identifiers and relationships to form a kind of structure... | |
| ISO/TS 19264-1:2017 describes a method for analysing imaging systems quality in the area of cultural heritage imaging. The method described analyses multiple imaging systems quality characteristics from a single image... | |
| ISO/TS 19293:2018 specifies requirements for a record of a dispense of a medicinal product. It is intended to be adopted by detailed, implementable specifications, such as interoperability standards, system specifications,... | |
| ISO/TS 19321:2015 specifies the in-vehicle information (IVI) data structures that are required by different ITS services (for example, refer to ISO/TS 17425 and ISO/TS 17426) for exchanging information between ITS... | |
| ISO/TS 19336:2015 specifies main characteristics and test methods of polyarylate fibre ropes used for offshore station keeping. | |
| ISO/TS 19337:2016 describes characteristics of working suspensions of nano-objects to be considered when conducting in vitro assays to evaluate inherent nano-object toxicity. In addition, this Technical Specification identifies applicable measurement... | |
| ISO/TS 19397:2015 describes a method for determining the film thickness of coatings on metallic and non-metallic substrates using an ultrasonic gauge. | |
| ISO/TS 19407:2015 comprises three shoe size conversion tables covering the major shoe sizing systems (Mondopoint, European and United Kingdom, as well as China, Japan and United States). The tables are... | |
| ISO/TS 19408:2015 defines terms commonly used for measuring feet and lasts and for determining the size of footwear. This vocabulary complements ISO 19952, Footwear ? Vocabulary. The term "shoe" means... | |
| ISO/TS 19425:2015 specifies the measurement method and requirements for combustion air inlet noise of air cleaners which are installed on reciprocating internal combustion engines, including laboratory measurement (engineering method and... | |
| ISO/TS 19466:2017 specifies test procedures for measuring performance of regenerative braking systems used for electric motorcycles and mopeds that are propelled by traction motors with electric batteries. Performance of regenerative... | |
| ISO/TS 19567-1:2016 specifies a protocol to measure the texture reproduction in the images captured and processed by digital cameras including cameras in other devices, e.g. in camera phones. ISO/TS 19567-1:2016... | |
| ISO/TS 19620:2018 specifies a method primarily developed for the determination of inorganic arsenic species (arsenite (As(III)) and arsenate (As(V)) dissolved in a sample after a preservation process in waters with... | |
| ISO/TS 19657:2017 specifies definitions and technical criteria (acceptable sources, materials and processes) to be fulfilled for food ingredients to be considered as natural. ISO/TS 19657:2017 is applicable to food ingredients. | |
| ISO/TS 19700:2016 describes a steady-state tube furnace (SSTF) method for the generation of fire effluent for the identification and measurement of its constituent combustion products, in particular, the yields of... | |
| ISO/TS 19708:2007 specifies a test method for the determination, using a roller compactor for bituminous mixtures, of the damage to a geosynthetic used as a separator in interlocking-concret e-block pavements. | |
| ISO/TS 19709-2:2015 specifies the main characteristics and the testing of durable, reusable, parallelepipedic containers and their accessories which form a column stackable system (CSS) designed to contain bulk or precisely... | |
| ISO/TS 19709-3:2016 specifies the main characteristics and the testing of durable, reusable, parallelepipedic containers and their accessories which form a bond stackable system (BSS) designed to contain bulk or precisely... | |
| ISO/TS 19713-1:2010 describes laboratory test methods to measure engine air cleaner and filter performance by fractional efficiency tests for particles from 0,3 µm to 5 µm optical diameter. Performance includes,... | |
| ISO/TS 19713-2:2010 describes laboratory test methods to measure engine air cleaner and filter performance by fractional efficiency tests for particles from 5 µm to 40 µm, using ISO 12103-1 test... | |
| ISO/TS 19736:2017 specifies a test method for bonding of polymer teeth to denture base materials. This test method is not designed to prove the properties of polymer teeth and denture... | |
| ISO/TS 19837:2018 specifies principles for the design, selection and application of trapped key interlocking devices and systems for machinery applications, independent of the type of energy used to control them... | |
| ISO/TS 19858:2015 defines test procedures for classifying the lubrication ability of saw chain lubrication oils when using guide bar and saw chain. These test procedures create a reproducible replication of... | |
| ISO/TS 19880-1:2016 recommends the minimum design characteristics for safety and, where appropriate, for performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty land vehicles (e.g. | |
| ISO/TS 19883:2017 identifies safety measures and applicable design features that are used in the design, commissioning, and operation of pressure swing adsorption systems for hydrogen separation and purification. It applies... | |
| ISO/TS 19911:2010 describes the individual elements of a technical file, specifying the characteristics of fittings with spigot ends for butt fusion or electrofusion assembling. | |
| ISO/TS 19930:2017 provides guidance on identifying the aspects to be considered as part of a risk-based approach to selecting a sterility assurance level (SAL) for terminally sterilized, single-use health care... | |
| ISO/TS 20026:2017 specifies an extension of the ETSI C-ITS test architecture for conformance testing of protocols and applications in ITS station units. It specifies usage of the ITS station-internal management... | |
| ISO/TS 20273:2017 provides guidance for setting appropriate weld quality requirements in relation to fatigue. ISO/TS 20273:2017 is applicable to fusion (arc and/or beam welding) welded steel plate-type structures having a... | |
| ISO/TS 20281:2006 offers guidance on statistical methods used for the analysis of data of standardized ecotoxicity tests. It focuses on statistical methods for obtaining statistical estimates of parameters. The methods... | |
| ISO/TS 20282:2013 specifies a user-based summative test method for the measurement of the usability and/or accessibility of consumer products and products for public use (including walk-up-and-use products) for one or... | |
| ISO/TS 20328:2016 specifies the measurements and specifications of the dimensions of a lenticular lens sheet. It describes measurement methods and specifies the nominal sizes and target dimensions with tolerance. It... | |
| ISO/TS 20428:2017 defines the data elements and their necessary metadata to implement a structured clinical genomic sequencing report and their metadata in electronic health records particularly focusing on the genomic... | |
| ISO/TS 20440:2016 describes data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of administration and packaging. Based on... | |
| ISO/TS 20443:2017 defines concepts and describes data elements and their structural relationships, which are required for the unique identification and the detailed description of Medicinal Products. Taken together, all ISO... | |
| ISO/TS 20451:2017 defines the concepts required to associate pharmaceutical products with an appropriate set of PhPID(s) in accordance with ISO 11616. Pharmaceutical identifiers and elements are to represent pharmaceutical products... | |
| ISO/TS 20452:2007 describes the functional requirements and Logical Data Model for PSF and API and the Logical Data Organization for PSF that were completed under ISO/NP 14826. It does not... | |
| ISO/TS 20460:2015 establishes guidelines to link and, where applicable, calibrate the online gauge, following laboratory measurement for a given paper and board property. Paper and board online measuring equipment is... | |
| ISO/TS 20477:2017 defines terms and definitions for different types of cellulose nanomaterials including secondary components found in cellulose nanomaterials due to their manufacturing processes. The document also gives information on... | |
| ISO/TS 20593:2017 specifies a method for the determination of the airborne concentration (μg/m3), mass concentration (μg/g) and mass fraction (%) of tyre and road wear particles (TRWP) in... | |
| ISO/TS 20612:2007 specifies the criteria related to proficiency testing by interlaboratory comparisons in the field of water, waste water and sludge analysis. In particular, it specifies the requirements in respect... | |
| ISO/TS 20625:2002 describes the rules for the derivation of XML schemas from EDI MIGs providing a sound method of representing semantic facts. ISO/TS 20625:2002 describes how to derive XML from... | |
| ISO/TS 20646:2014 provides information and guidelines to properly utilize various ergonomics standards concerning the factors related to musculoskeletal workload (MSWL), and helps develop activities to reduce or optimize MSWL in... | |
| ISO/TS 20656-1:2017 describes how partial factors for buried GRP pipes are developed, and are primarily intended to define the necessary safety measures for GRP pipes that meet the requirements of... | |
| ISO/TS 20658:2017 specifies requirements and good practice recommendations for the collection, transport, receipt and handling of samples intended for medical laboratory examinations. ISO/TS 20658:2017 is applicable to medical laboratories and... | |
| ISO/TS 20746:2016 gives the practical details of the test method for the measurement of the strength of a dental amalgam by the Hertzian indentation strength test (HIT) method. It is... | |
| ISO/TS 20836:2005 provides basic requirements for the installation, performance and maintenance of thermal cyclers. Although thermal cyclers are robust technical equipment, they do require regular maintenance. Their cooling/heating elements have... | |
| ISO/TS 21003-7:2008 is applicable, in conjunction with the other parts of ISO 21007, to multilayer piping systems intended to be used for hot and cold water installations inside buildings for... | |
| ISO/TS 21089:2018 describes trusted end-to-end flow for health information and health data/record management. Health data is originated and retained, typically as discrete record entries within a trusted electronic health record... | |
| ISO/TS 210:2014 describes the specifications to be met by the containers intended for containing essential oils, as well as recommendations relating to their conditioning and storage. Essential oils are used... | |
| ISO/TS 21108:2005 specifies the dimensions and tolerances for the interface between impulse wrenches and their power sockets: output spindle of power tool/female drive end of power socket. This interface is... | |
| ISO/TS 21144:2016 establishes test methods for evaluating electronic paper display (EPD) when used in indoor tasks and environments. It is intended to be applied together with the measurement procedures of... | |
| ISO/TS 211:2014 specifies the general rules for labelling and marking of containers for essential oils to enable the identification of the contents. | |
| ISO/TS 21219-10:2016 defines the TPEG Conditional Access Information (CAI) application. It allows to protect the content of a TPEG service from unauthorized access. It further supports the management of subscriber... | |
| ISO/TS 21219-14:2016 specifies the TPEG Parking Information application which has been designed to deliver parking information to a variety of receivers using a number of different channels, foremost of course... | |
| ISO/TS 21219-15:2016 specifies the TPEG application: Traffic Event Compact (TEC). The TEC application has been specifically designed to support information about traffic events (e.g. road works, traffic jams). A specific... | |
| ISO/TS 21219-16:2016 specifies the TPEG application: Fuel price information and availability (FPI). The FPI application has been specifically designed to support information of fuel stations, their location, fuel types offered... | |
| ISO/TS 21219-18:2015 specifies the TPEG application Traffic Flow and Prediction (TFP). It has been specifically designed to provide information to a variety of receivers using different channels, including in the... | |
| ISO/TS 21219-19:2016 defines the TPEG Weather (WEA) application for reporting weather information for travellers. It provides general weather-related information to all travellers and is not limited to a specific mode... | |
| ISO/TS 21219-1:2016 defines an index to the complete set of TPEG Generation 2 toolkit components and applications. New applications are enumerated with an Application Identification (AID) as they are added... | |
| ISO/TS 21219-21:2018 defines a method of using geographic location referencing (GLR) that can be used by relevant TPEG applications. The GLR type is defined in this document. It is used... | |
| ISO/TS 21219-22:2017 specifies the logical data format of OpenLRTM location references and general requirements of the method in Clause 6 and defines the structure of the TPEG toolkit for... | |
| ISO/TS 21219-23: 2016 describes new mobility services like car sharing, car rental or park and ride as well as the integration of different transport modes by multimodal or off-board navigation... | |
| ISO/TS 21219-24:2017 defines the LTE encryption mechanism for TPEG Service Data Frames. It has been specifically designed for use with Business to Business (B2B) business models. The objective of this... | |
| ISO/TS 21219-25:2017 defines the TPEG application electromobility charging infrastructure (EMI). It has been specifically designed to support information about charging infrastructure for electric vehicles (not just cars), the location of... | |
| ISO/TS 21219-2:2014 specifies rules for the creation and extending of TPEG application UML models. The rules are intended to ensure that TPEG application UML models can be interpreted unambiguously for... | |
| ISO/TS 21219-3:2015 specifies the rules for converting TPEG application UML models to the TPEG binary format description. It contains the binary format definition of the abstract data types defined in... | |
| ISO/TS 21219-4:2015 specifies the rules for converting TPEG application UML models to the tpegML format description. It contains the XML format definition of the abstract data types defined in TISA... | |
| ISO/TS 21219-5:2015 establishes a method of conveying data for a wide range of applications that require the efficient transmission of point to multi-point data over potentially unreliable broadcast channels. It... | |
| ISO/TS 21219-6:2015 adds a basic toolkit definition to the ISO 21219 series specifying the Message Management Container (MMC), which is used by all TPEG applications to provide information about the... | |
| ISO/TS 21219-7:2017 establishes the method of signalling the specific location referencing used by all TPEG2 applications that require detailed location information to be delivered to client devices such as TPEG2-TEC. | |
| ISO/TS 21219-9:2016 establishes the method of delivering service and network information within a TPEG service. The TPEG-SNI application is designed to allow the efficient and language independent delivery of information... | |
| ISO/TS 21268-1:2007 specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 2... | |
| ISO/TS 21268-2:2007 specifies a test providing information on leaching of soil and soil materials under the experimental conditions specified hereafter, and particularly at a liquid to solid ratio of 10... | |
| ISO/TS 21268-3:2007 specifies a test, which is aimed at determining the leaching behaviour of inorganic and organic constituents from a soil and soil material. The method is a once-through percolation... | |
| ISO/TS 21268-4:2007 specifies a test method to obtain information on the short- and long-term leaching behaviour and characteristic properties of materials. It applies to the determination of the influence of... | |
| ISO/TS 21308-4:2007 describes the mapping to STEP application protocol 239 for the exchange of dimensional data between truck chassis manufacturers and bodywork manufacturers. It applies to commercial vehicles, as defined... | |
| ISO/TS 21396:2017 specifies a method for the determination of the soil or sediment mass concentration (μg/g) of tyre and road wear particles (TRWP) in environmental samples. ISO/TS 21396:2017 establishes principles... | |
| ISO/TS 21432:2005 gives the standard test method for determining residual stresses in polycrystalline materials by neutron diffraction. It is applicable to homogeneous and inhomogeneous materials and to test pieces containing... | |
| ISO/TS 21522:2017 gives guidance on the quantitative test methods to measure chemical components in fumes emitted during the manufacturing process of rubbers (including storage) and considered hazardous. NOTE Quantification of... | |
| ISO/TS 21569-3:2015 describes a procedure for the detection of the DNA transition sequence between the 35S promotor (P35S) from Cauliflower mosaic virus and a modified phoshinothricin-acet yltransferase gene (pat) from... | |
| ISO/TS 21569-4:2016 specifies a procedure for the detection of a DNA sequence of the promoter region of the nopaline synthase gene (P-nos) from Agrobacterium tumefaciens and a procedure for the... | |
| ISO/TS 21569-5:2016 specifies a procedure for the detection of a DNA sequence used in genetically modified (GM) plants by means of a real-time PCR (polymerase chain reaction). The method detects... | |
| ISO/TS 21569-6:2016 specifies a procedure for the detection of a DNA sequence of the modified cry1Ab/Ac gene and a procedure for the detection of the DNA transition sequence between the... | |
| ISO/TS 21609:2014 gives requirements and recommendations for the installation in road vehicles of radio frequency (RF) transmitting and receiving equipment, "in-road-vehicle" mounting kits for transportable and hand-held RF equipment, and... | |
| ISO/TS 21619:2018 specifies the basic types of documents with geometrical product specifications (GPS), their relationship and their related terms and definitions. | |
| ISO/TS 21623:2017 describes a systematic approach to assess potential occupational risks related to nano-objects and their agglomerates and aggregates (NOAA) arising from the production and use of nanomaterials and/or nano-enabled... | |
| ISO/TS 21719-1:2018 describes: - an overall description of the EFC personalization process; - a description of EFC functionality that can be used for personalization. The personalization process takes place within... | |
| ISO/TS 21719-2:2018 specifies - personalization interface: dedicated short-range communication (DSRC), - physical systems: on-board equipment and the personalization equipment, - DSRC-link requirements, - EFC personalization functions according to ISO/TS 21719-1... | |
| ISO/TS 21749:2005 follows the approach taken in the Guide to the expression of the uncertainty of measurement (GUM) and establishes the basic structure for stating and combining components of uncertainty. | |
| ISO/TS 21929-2:2015 establishes a list of aspects and impacts which should be taken as the basis for the development of sustainability indicators for assessing the sustainability performance of new or... | |
| ISO/TS 22002‑4:2013 specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRPs) to assist in controlling food safety hazards in the manufacture of food packaging. This Technical Specification is applicable... | |
| ISO/TS 22002-1:2009 specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRP) to assist in controlling food safety hazards. ISO/TS 22002-1:2009 is applicable to all organizations, regardless of size or... | |
| ISO/TS 22002-2:2013 specifies the requirements for the design, implementation, and maintenance of prerequisite programmes (PRPs) to assist in controlling food safety hazards in catering. ISO/TS 22002-2:2013 is applicable to all... | |
| ISO/TS 22002-3:2011 specifies requirements and guidelines for the design, implementation, and documentation of prerequisite programmes (PRPs) that maintain a hygienic environment and assist in controlling food safety hazards in the... | |
| ISO/TS 22002-6:2016 specifies requirements for establishing, implementing and maintaining prerequisite programmes (PRPs) to assist in controlling feed safety hazards in feed and animal food and in materials intended for use... | |
| ISO/TS 22003:2013 defines the rules applicable for the audit and certification of a food safety management system (FSMS) complying with the requirements given in ISO 22000 (or other sets of... | |
| ISO/TS 22028-4:2012 defines an extended colour-gamut output-referred RGB colour image encoding designated as European Colour Initiative RGB [eciRGB (2008)]. Digital images encoded using eciRGB (2008) can be manipulated, stored, transmitted,... | |
| ISO/TS 22077-2:2015 defines the application of medical waveform format encoding rules (MFER) to describe standard electrocardiogram waveforms measured in physiological laboratories, hospital wards, clinics, and primary care medical checkups. It... | |
| ISO/TS 22077-3:2015 defines the application of medical waveform format encoding rules (MFER) to describe long-term electrocardiogram waveforms measured in physiological laboratories and health care clinics. It covers electrocardiograms such as... | |
| ISO/TS 22113 IDF/RM 204:2012 specifies a routine method for determining the titratable acidity of milk fat. The method is applicable to milk fat obtained from: a) raw milk; b) heat-treated... | |
| ISO/TS 22117:2010 gives requirements and guidance for the organization of proficiency testing schemes for microbiological examinations of: a) food and beverages; b) animal feeding stuffs; c) food production environments and... | |
| ISO/TS 22163:2017 specifies requirements for a quality management system when an organization: a) needs to demonstrate its ability to consistently provide products and services that meet customer and applicable statutory... | |
| ISO/TS 22220:2011 indicates the data elements and structure suited to accurate and procedurally appropriate and sensitive identification of individuals in health care in a face-to-face setting supported by computer technology,... | |
| ISO/TS 22240:2008 presents an enhanced data exchange and data storage format for all data relevant for vehicle safety tests. The underlying data model is based on ASAM ODS, and the... | |
| ISO/TS 22269:2005 describes a full-scale reference scenario procedure for assessing the burning behaviour of stairs or stair coverings, when exposed to a defined ignition source. The risks addressed in this... | |
| ISO/TS 22304:2008 specifies the procedure for the determination of the tobacco specific nitrosamines (TSNAs): N-nitrosonornicotine (NNN), N-nitrosoanatabine (NAT), N-nitrosoanabasine (NAB) and 4-(methyl-nitrosamin o)-1-(3-pyridyl)-1-b utanone (NNK) in ground leaf tobacco, manufactured... | |
| ISO/TS 22317:2015 provides guidance for an organization to establish, implement, and maintain a formal and documented business impact analysis (BIA) process. This Technical Specification does not prescribe a uniform process... | |
| ISO/TS 22318:2015 gives guidance on methods for understanding and extending the principles of BCM embodied in ISO 22301 and ISO 22313 to the management of supplier relationships. This Technical Specification... | |
| ISO/TS 22367:2008 characterizes the application of ISO 15189 as a system for reducing laboratory error and improving patient safety by applying the principles of risk management, with reference to examination... | |
| ISO/TS 22475-2:2006 specifies the qualification criteria for an enterprise and personnel performing sampling and groundwater measurement services so that all have the appropriate experience, knowledge and qualifications as well as... | |
| ISO/TS 22475-3:2007 is applicable to the conformity assessment of enterprises and personnel performing specified parts of sampling and groundwater measurements according to ISO 22475-1 and complying with the technical qualification... | |
| ISO/TS 22559-3:2011 specifies prerequisite requirements for application for a global conformity assessment procedure (GCAP) certificate of conformity for new lift (elevator) systems, lift components or lift functions. | |
| ISO/TS 22559-4:2011 specifies requirements for certification of conformity for model lifts, lift (elevator) systems, lift components or lift functions by global conformity assessment bodies (GCAB), related responsibilities of GCABs, and... | |
| ISO/TS 22595-1:2006 is applicable to dental suction equipment in the plant area, used to source suction for the dental equipment specified in ISO 10637. ISO/TS 22595-1:2006 gives recommended guidelines for... | |
| ISO/TS 22595-2:2008 applies to compressor units for dental air and specifies quality requirements for dental air, fittings, pipe lines and valves in the plant area, used to source compressed air... | |
| ISO/TS 22762‑4:2014 provides guidance on the use of ISO 22762‑3:2010. It includes example design calculations and provides data on the characteristics obtained from all types of elastomeric isolators. | |
| ISO/TS 22809:2007 has been established to consider and define types of discontinuities to be exhibited in test specimens for use in non-destructive testing examinations. | |
| ISO/TS 22911:2016 concerns animal tests relevant to the functional assessment of dental implant systems, using both macroscopic and microscopic parameters. It is intended for use only when risk analysis indicates... | |
| ISO/TS 22939:2010 specifies a method for the measurement of several enzyme activities simultaneously in soil samples. Enzyme activities of soil vary seasonally and depend on the chemical, physical and biological... | |
| ISO/TS 23165:2006 gives guidance for the application of the test described in ISO 10360-2, by explaining the evaluation of the test uncertainty required for ISO 14253-1. | |
| ISO/TS 23556:2007 specifies a multipass soot-filtration test method using batch thermal gravimetric analysis (TGA), continuous online Fourier Transformation Infrared (FTIR), or other approved soot-measuring techniques for evaluating the initial filtration... | |
| ISO/TS 23768-1:2011 specifies a reference dictionary for all rolling bearings described in the various International Standards relevant to rolling bearings, together with their descriptive properties and domains of values. It... | |
| ISO/TS 23893-2:2007 specifies a method for measuring the ethoxyresorufin-O-de ethylase (EROD) enzyme activity on a post-mitochondrial fraction of fish liver homogenate (subcellular fraction in which the EROD activity is located)... | |
| ISO/TS 24348:2014 specifies methods for accelerated wear and corrosion, to be used prior to the detection of nickel release from coated metal and combination spectacle frames, and for detecting the... | |
| ISO/TS 24520:2017 provides guidance to water utilities on good practice in technical aspects of crisis management. ISO/TS 24520:2017 is applicable to all water utilities, of whatever size, whether public or... | |
| ISO/TS 24530-1:2006 establishes the top-level "containers" for TPEG messages in XML and the common data types that are used by tpegML applications (e.g. tpeg-ptiML). Inherently, tpegML is designed to "map"... | |
| ISO/TS 24530-2:2006 establishes the XML encoding of the method of Location Referencing used by TPEG applications. TPEG applications contain the information required by a client TPEG decoder (i.e. both Location... | |
| ISO/TS 24530-3:2006 establishes the XML encoding of the method of the Road Traffic Message application. | |
| ISO/TS 24530-4:2006 establishes the XML encoding of the method of the Public Transport Information application. The Public Transport Information application is intended to cover all modes of public (i.e. collective)... | |
| ISO/TS 24533:2012 specifies the data concepts applicable to the movement of freight and its intermodal transfer. These data concepts include information entities (data elements), aggregated/associate d information entities (groups of... | |
| ISO/TS 24597:2011 specifies methods of evaluating the sharpness of digitized images generated by a scanning electron microscope by means of a Fourier transform method, a contrast-to-gradient method and a derivative... | |
| ISO/TS 24679:2010 provides a methodology for assessing the performance of structures in the built environment when exposed to a real fire. ISO/TS 24679:2010, which follows the principles outlined in ISO... | |
| ISO/TS 25114:2010 provides a common framework for defining probe data reporting management (PDRM) messages to facilitate the specification and design of probe vehicle systems and gives concrete definitions of PDRM... | |
| ISO/TS 25138:2010 describes a glow-discharge optical-emission spectrometric method for the determination of the thickness, mass per unit area and chemical composition of metal oxide films. The method is applicable to... | |
| ISO/TS 25238:2007 is concerned with the safety of patients and gives guidance on the analysis and categorization of hazards and risks to patients from health software products, in order to... | |
| ISO/TS 25377:2007 provides an understanding of the nature of measurement uncertainty and its significance in estimating the quality of a measurement or a determination in hydrometry. It is applicable to... | |
| ISO/TS 25740-1:2011: specifies global essential safety requirements (GESRs) for escalators and moving walks, their components and functions, and establishes a system and provides methods for minimizing safety risks that might... | |
| ISO/TS 26884 IDF/RM 215:2006 specifies a microbiological inhibitor test for the detection of a broad variety of antimicrobials in milk and milk products. The method is applicable to raw milk,... | |
| Refers to the available international standard method(s) for the determination of required element(s) in steel and iron. States the field of application, the method of determination (principle), and the precision... | |
| The information in ISO/TS 16829:2017 covers all kinds of ultrasonic testing on components or complete manufactured structures for either correctness of geometry, for material properties (quality or defects), and for... | |
| The overall scope of ISO/TS 19299:2015 is an information security framework for all organizational and technical entities of an EFC scheme and in detail for the interfaces between them, based... | |
| The purpose of ISO/TS 16843-2:2015 is to specify categorial structures within the subject field of acupuncture by defining a set of domain constraints for use within terminological resources. This Technical... | |
| The purpose of ISO/TS 17969:2017 is to help members of the oil and gas industry develop, implement, maintain and improve their own competency management systems (CMS) for well operations personnel. | |
| The purpose of ISO/TS 18864:2017 is to define objective, reliable and reproducible quality metrics for detailed clinical models (DCM). ISO/TS 18864:2017 specifies the principal metrics which are necessary and sufficient... | |
| The purpose of ISO/TS 21547:2010 is to define the basic principles needed to securely preserve health records in any format for the long term. It concentrates on previously documented healthcare... | |
| The purpose of ISO/TS 22789:2010 is to specify a categorial structure, within the subject field of patient findings and problems, by defining a set of common domain constraints for use... | |
| This document describes procedures to characterize quadrupole mass spectrometers (QMSs) with an ion source of electron impact ionization and which are designed for the measurement of atomic mass-to-charge ratios m/z... | |
| This document specifies a test method for the determination of resistance of coating systems or tape for wind-turbine rotor blades to rain erosion by using the rotating arm test. | |
| This document specifies minimum requirements and weathering for coating systems for wind-turbine rotor blades. | |
| This document specifies test methods for the determination of resistance of coating systems or tape for wind-turbine rotor blades to rain erosion by using the water jet test. | |
| This report deals with systems based on hydraulic devices using only the energy that can be obtained from the water in the irrigation system; it gives main definitions and a... | |
| This Technical Report type 3 contains the fundamental concepts and terminology for the conceptual schema, the information base, and the mechanisms involved in manipulating them. The approaches and associated languages... | |
| This Technical Report type 3 describes a methodology for determining whether a programming language processor possesses the required characteristics stated in the International Standard for the particular programming language for... | |
| This Technical Specification provides the requirements and a structure for a data documentation format, to be used for transparent and unambiguous documentation and exchange of Life Cycle Assessment (LCA) and... |
| << Prev | Next >> |