CSA Group Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
| Product Name | Notes |
|---|---|
| ISO/IEC 14165-372:2011(E) is intended to documentinteroperabi lity behaviour for Fabric elements (i.e., E_Port , F_Port , FL _Port). It includes a wide rangeof issues such as link initialization, error detection,... | |
| ISO/IEC/IEEE 60559:2011(E) specifies formats and methods forfloating-point arithmetic in computer systems - standard and extended functionswith single, double, extended, and extendable precision and recommends formatsfor data interchange. Exception conditions are... | |
| 1.1 Fields of application These Service Delivery guidelines are applicable to Very Small Entities (VSEs). A VSE is an enterprise, an organization, a department or a project having up to... | |
| A digital signature in electronic exchange of information provides the same kind of facilities that are expected from a handwritten signature in paper-based mail. Hence it is applicable to providing... | |
| Abstract: An extensible IEEE 802® media access independent services framework (i.e., function and protocol) is defined that enables the optimization of services including handover and other services when performed between... | |
| Abstract: Several use cases and services are defined, namely, handover between heterogeneous networks, home energy management system, software-defined radio access networks (SDRANs), radio resource management (RRM), and device-to-device (D2D) communication... | |
| Abstract: The MAC Service and the Internal Sublayer Service (ISS) are defined in this standard. This standard specifies media-dependent convergence functions that map IEEE 802® MAC interfaces to the ISS. | |
| Abstract: Within the context of the ISO/IEEE 11073 family of standards for device communication, this standard establishes a normative definition of the communication between personal strength fitness devices and managers... | |
| Amends clauses 2, subclauses 3.1, 4.1.1, 4.1.2, 4.3.1, 4.3.2, annex B, replaces clause 1, annex A, adds clauses 6 (Tables for PHIGS PLUS), 7 (Functions in the Ada binding of... | |
| Amends clauses 5, 6, subclauses 9.9, 9.12.7. | |
| Amends Introduction, clauses 1, 2, 3, 4, 6, 7, subclauses 3.1, 3.11.3, 3.12.2, 3.13, 4.2 (table 1), 4.3.1 (table 2), 4.3.2 (table 3), A.1, A.2, A.3, B.6, C.1, E.1, E.2,... | |
| Amends pages 9, 35, 75, 76, 77, 148, 149, 166. | |
| Amends subclauses 4.2.2, 5.8, 5.11, annex A. | |
| Amends subclauses 5.3, 5.4, 7.9, 7.12.7, A.2, A.3. | |
| An increasing number of international, national and industry standards describe process models. These models are developed for a range of purposes including process implementation and assessment. The terms and descriptions... | |
| An ISO/IEC 11179-based metadata registry (MDR) (hereafter referred to as a "registry") is a tool for the management of shareable data; a comprehensive, authoritative source of reference information about data. | |
| Cancels and replaces the first edition (1988). Specifies the physical and magnetic characteristics of a 12,7 mm wide, 18 track magnetic tape cartridge to enable interchangeability of such cartridges. Also... | |
| Cancels and replaces the first edition (1991). Specifies a general methodology for testing the conformance of products to OSI specifications which the products are claimed to implement. The methodology applies... | |
| Cancels and replaces the first edition (1991). Specifies requirements and gives guidance concerning the realization of a Means of Testing (MOT). Applicable to producing MOTs for testing a single protocol,... | |
| Cancels and replaces the first edition (1991). Specifies requirements on both the test laboratory and the client, for the conduct of the conformance assessment process. Also provides some guidance on... | |
| Cancels and replaces the first edition (1991). Specifies the requirements and gives guidance for the production of system-independent conformance test suites for one or more OSI specifications. Applicable to the... | |
| Concentrates on the specialized equipment required for gaining access through the ice sheet and obtaining area, velocity, and other information for determining the rate of flow under ice. Does not... | |
| Configuration management (CM) is a process central to the software engineering life cycle. CM has been established as an ISO/IEC standard life cycle process in ISO/IEC 12207:2008, Information technology — | |
| Contains a permuted index of all terms included in the parts 1 - 28 of ISO 2382. If any of these parts has been revised, the present TR refers to... | |
| Contains the Protocol Implementation Conformance Statement (PICS) for ITU-T Rec. X.235 (ISO/IEC 9548-1) in compliance with the relevant requirements, and in accordance with the relevant guidance given in ITU-T Rec. | |
| Contains the Protocol Implementation Conformance Statement (PICS) for ITU-T Rec. X.236 (ISO/IEC 9576-1) in compliance with the relevant requirements, and in accordance with the relevant guidance given in ITU-T Rec. | |
| Defines more than 550 terms relevant to automation in an industrial manufacturing environment. All the terms and definitions have been obtained from the previous approved ISO publications listed in each... | |
| Defines terms used in the context of implementation testing, presents a conceptual model of ODA implementations, gives a phased approach to testing implementations, determines the functional components in generation and... | |
| Defines those functions of the interface concerned with obtaining graphical and non-graphical input from a virtual device. Defines also functions to support echoing of input operations on separate virtual devices. | |
| Defines those functions of the interface concerned with the creation, modification, and manipulation of graphic pictures using segments. Annexes A and B form an integral part of this standard. Annexes... | |
| Describes a CO/CL interworking solution based on three modes of operation: a network layer relay mode, a passive transport layer relay mode, and an active transport layer relay mode. Annex... | |
| Describes interchange requirements for longitudinal-oriente d, unrecorded magnetic tape wound on reels or hubs designed for instrumentation-reco rding applications. Recording and playback of the tapes shall be done on equipment... | |
| Describes the cross layer aspects of the revision of security services in the lower layers of the OSI reference Model (transport, network, data link, physical). Describes the architectural concepts common... | |
| Describes the function of the Interworking unit (IWU) in terms of the mapping between Protokol Data Units (PDUs) that it receives from one interface, and PDUs that it then transmits... | |
| Describes the medium interface connection device used between the terminal equipment and the trunk coupling unit for the trunk cable. Cables or wires used in conjunction with the connectors are... | |
| Describes those functions of the interface concerned with creating, modifying, retrieving, and displaying portions of an image stored as pixel data. Annexes A and B form an integral part of... | |
| Describes those functions of the interface concerned with output primitives and associated attributes and controls for creating graphical pictures. Annexes A and B form an integral part of this standard. | |
| Describes those functions of the interface concerned with virtual device management, coordinate space control, and error control. Annexes A and B form an integral part of this standard. Annex C... | |
| Establishes a uniform guide for defining the degree of external leakage. The choice of classification is intended to be by visual means rather than with the aid of instruments. Describes... | |
| For aspects of quality specific to facial images, ISO/IEC TR 29794-5:2010: specifies terms and definitions that are useful in the specification, use and testing of face image quality metrics; defines... | |
| For each of the function syntaxes in clauses 5 and 6 of ISO/IEC 9636-2 to 9636-6, an encoding is specified in terms of an opcode and a sequence of parameters... | |
| Friction linings are composite materials with complex structure. Due to their composition and their production process, visual appearance characteristics can occur which in a precisely defined design are to be... | |
| Gives a method of calculating head loss in the transport of liquids under pressure in hydraulically smooth thermoplastic pipes. The formulae given (for calculating head drop and head loss, for... | |
| Gives advice on gear checking methods and the analysis of measurement results. Supplements the standard ISO 1382-2. | |
| Gives guidance on the concepts of Implementation Conformance Statements (ICSs) and System Conformance Statements (SCSs) related zu OSI specifications and specifies requirements and gives guidance on the production of ICSs,... | |
| IEC/ISO/IEEE 80005-1:2012(E) describes high voltage shore connection (HVSC) systems, on board the ship and on shore, to supply the ship with electrical power from shore. This standard is applicable to... | |
| In biometric performance testing and reporting, careful consideration needs to be given to the characteristic differences of each modality (fingerprint, face, iris, etc.). These differences naturally require variations within the... | |
| Includes a reference model, the relationship to other standards, and profiles. Establishes the framework for all the parts of ISO/IEC 9636. Does not contain functional descriptions. | |
| Is a complement to ISO/IEC 9171-2 for the type A and B formats. Covers the figures that characterize each format, the relationship between these figures, and the technological background used... | |
| ISO 10465-3:2007 gives supplementary information on parameters and application limits for the underground installation of flexible glass-reinforced pipes based on unsaturated polyester resin (GRP-UP). It is particularly relevant when using... | |
| ISO 11071-2:2006 consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding regional or national deviations): CEN European Standard EN 81-2:1998,... | |
| ISO 11073-10101:2004 covers nomenclature architecture for point-of-care (POC) medical device communication (MDC). It defines the overall architecture of the organization and relationships among nomenclature components and provides specifications of semantics... | |
| ISO 11819-4:2013 specifies a modified version of the statistical pass-by (SPB) method that uses a microphone mounted on a backing board instead of a microphone in normal, free-field conditions. It... | |
| ISO 22853:2005 specifies the XML application MSML (Maritime Safety Markup Language). MSML is a language for structuring information and the goal is to create an open standard that can be... | |
| ISO PAS 11154:2006 specifies the minimum safety requirements for all roof load carriers intended for mounting on or above the roofs of passenger cars and light commercial vehicles with a... | |
| ISO/IEC 13818-5:2005-05-23 provides a C language software simulation of an encoder and decoder for Part 1 (Systems), Part 2 (Video), Part 3 (Audio), Part 7 (AAC) and Part 11 (IPMP)... | |
| ISO/IEC 14165-313:2013(E) defines a set of features necessary to implement a real-time fibre channel network (switched fabric or arbitrated loop) supporting the FC-AE-ASM Upper Level Protocol. Fibre Channel Avionics Environment... | |
| ISO/IEC 14165-314:2013(E) defines the FC-AE-RDMA Upper Level Protocol. FC-AE-RDMA follows the SCSI-3 FCP standard in its definition of the services necessary to support low latency, low overhead communication between elements... | |
| ISO/IEC 14763-2-1:2011(E) contains requirements and recommendations for identification of cabling infrastructure elements to support ISO/IEC 14763-2 and equivalent standards. The symbols and object codes specified in this Technical Report are... | |
| ISO/IEC 15504 provides a framework for the assessment of processes. This framework can be used by organizations involved in planning, managing, monitoring, controlling, and improving the acquisition, supply, development, operation,... | |
| ISO/IEC 17023:2013 provides guidelines for determining the duration of management system certification audits, to the bodies providing audit and certification of management systems and to those that develop and maintain... | |
| ISO/IEC 18000 defines the air interfaces for radio frequency identification (RFID) devices used in item management applications. ISO/IEC 18000-7:2009 defines the active air interface for these devices operating in the... | |
| ISO/IEC 26511:2011 specifies procedures for managing user documentation throughout the software life cycle. It applies to people or organizations producing suites of documentation, to those undertaking a single documentation project,... | |
| ISO/IEC 26515:2011 specifies the way in which user documentation can be developed in agile development projects. It is intended for use in all organizations that are using agile development, or... | |
| ISO/IEC 29107-1:2010(E) specifies the concept for a taxonomy ofstandards and other related specifications applicable to intel ISO/IEC29107-1:2010( E) specifies the concept for a taxonomy of standards and otherrelated specifications applicable... | |
| ISO/IEC 29110 is applicable to Very Small Entities (VSEs). VSEs are enterprises, organizations, departments or projects having up to 25 people. The lifecycle processes described in the set of International... | |
| ISO/IEC 29110-5-2-1:2016 is applicable to Very Small Entities (VSEs). VSEs are enterprises, organizations, departments or projects having up to 25 people. The lifecycle processes described in the ISO/IEC 29110:2016 series... | |
| ISO/IEC 29110:2015 is applicable to Very Small Entities (VSEs). VSEs are enterprises, organizations, departments or projects having up to 25 people. The lifecycle processes described in the set of International... | |
| ISO/IEC 29125:2017(E) This document specifies the use of generic balanced cabling for customer premises, as specified in the ISO/IEC 11801 series, for remote powering of terminal equipment. It provides guidance... | |
| ISO/IEC 9594-1:2017 provides the directory capabilities required by OSI applications, OSI management processes, other OSI layer entities, and telecommunications services. Among the capabilities which it provides are those of "user-friendly... | |
| ISO/IEC 9594-3:2017 defines in an abstract way the externally visible service provided by the Directory. ISO/IEC 9594-3:2017 does not specify individual implementations or products. | |
| ISO/IEC 9594-4:2017 specifies the behaviour of DSAs taking part in a distributed directory consisting of multiple Directory systems agents (DSAs) and/or LDAP servers with at least one DSA. The allowed... | |
| ISO/IEC 9594-5:2017 specifies the Directory Access Protocol, the Directory System Protocol, the Directory Information Shadowing Protocol, and the Directory Operational Binding Management Protocol which fulfil the abstract services specified in... | |
| ISO/IEC 9594-6:2017 defines a number of attribute types and matching rules which may be found useful across a range of applications of the Directory. Attribute types and matching rules fall... | |
| ISO/IEC 9594-7:2017 defines a number of object classes and name forms which may be found useful across a range of applications of the Directory. The definition of an object class... | |
| ISO/IEC 9594-8:2017 addresses some of the security requirements in the areas of authentication and other security services through the provision of a set of frameworks upon which full services can... | |
| ISO/IEC 9594-9:2017 specifies a shadow service which Directory system agents (DSAs) may use to replicate Directory information. The service allows Directory information to be replicated among DSAs to improve service... | |
| ISO/IEC 9796-2:2010 specifies three digital signature schemes giving message recovery, two of which are deterministic (non-randomized) and one of which is randomized. The security of all three schemes is based... | |
| ISO/IEC 9797-1:2011 specifies six MAC algorithms that use a secret key and an n-bit block cipher to calculate an m-bit MAC. ISO/IEC 9797-1:2011 can be applied to the security services... | |
| ISO/IEC 9797-3:2011 specifies the following Message Authentication Code (MAC) algorithms that use a secret key and a universal hash-function with an n-bit result to calculate an m-bit MAC based on... | |
| ISO/IEC 9798-1:2010 specifies an authentication model and general requirements and constraints for entity authentication mechanisms which use security techniques. These mechanisms are used to corroborate that an entity is the... | |
| ISO/IEC 9798-2:2008 specifies entity authentication mechanisms using symmetric encipherment algorithms. Four of the mechanisms provide entity authentication between two entities where no trusted third party is involved; two of these... | |
| ISO/IEC 9798-5:2009 specifies entity authentication mechanisms using zero-knowledge techniques: mechanisms based on identities and providing unilateral authentication; mechanisms based on integer factorization and providing unilateral authentication; mechanisms based on discrete... | |
| ISO/IEC 9798-6:2010 specifies eight entity authentication mechanisms based on manual data transfer between authenticating devices. Four of these mechanisms are improved versions of mechanisms specified in ISO/IEC 9798-6:2005 since they... | |
| ISO/IEC 9834-1:2012: specifies a tree structure for allocations made by a hierarchical structure of Registration Authorities, called the international object identifier (OID) tree, which supports the ASN.1 OBJECT IDENTIFIER type... | |
| ISO/IEC 9834-3:2008 specifies the procedures for adding or modifying entries in the "Register of arcs beneath the top level arc with primary integer value 2" and for the publication of... | |
| ISO/IEC 9834-6:2005 specifies the procedures applicable to the registration of application processes and application entities. No requirement for an international registration authority has been identified; therefore these procedures apply to... | |
| ISO/IEC 9834-7:2008 specifies procedures for Registration Authorities that are responsible for the assignment to international organizations of names that are globally unambiguous in the context of: O/R addresses, as defined... | |
| ISO/IEC 9834-8:2014 specifies procedures for the generation of universally unique identifiers (UUIDs) and for their use in the international object identifier tree under the joint UUID arc. | |
| ISO/IEC 9834-9:2008 specifies the procedures for operating the Registration Authority for object identifiers under the arc {joint-iso-itu-t(2) tag-based(27)}, that supports tag-based applications and services. | |
| ISO/IEC 9899:2018 This document specifies the form and establishes the interpretation of programs written in the C programming language. 1) It specifies - the representation of C programs; - the... | |
| ISO/IEC 9973:2013 specifies procedures to be followed in preparing, maintaining and publishing the International Register of Items for any standard whose classes of items are applicable to this register. The... | |
| ISO/IEC 9995 defines a framework for the layout of all alphanumeric and numeric keyboards across the widest spectrum of today's and upcoming applications using keyboards. The functions to be performed... | |
| ISO/IEC Guide 14:2018 provides guidance on the provision of information concerning products and their related services intended for consumers. It outlines general principles and recommendations for content, methods, formats and... | |
| ISO/IEC Guide 17:2016 provides guidance and recommendations to writers of standards on the needs of micro, small and medium‐ sized enterprises (SMEs) in order to avoid the exclusion of SMEs... | |
| ISO/IEC Guide 21-1:2005 provides methods for: determination of the degree of correspondence between regional or national standards and relevant International Standards; adoption of International Standards as regional or national standards; | |
| ISO/IEC Guide 21-2:2005 provides methods for the following: the adoption of International Deliverables other than International Standards as regional or national deliverables; numbering of regional or national deliverables that are... | |
| ISO/IEC Guide 2:2004 provides general terms and definitions concerning standardization and related activities. It is intended to contribute fundamentally towards mutual understanding amongst the members of ISO and IEC and... | |
| ISO/IEC Guide 37:2012 establishes principles and gives recommendations on the design and formulation of instructions for use of products by consumers. ISO/IEC Guide 37:2012 is intended to be used by... | |
| ISO/IEC GUIDE 41:2018 This document provides general recommendations to be taken into consideration when determining the most suitable type of packaging for products intended for consumers. The functions that packaging... | |
| ISO/IEC Guide 46:2017 establishes general principles for the conduct of comparative testing of products and services for the information of consumers. It does not cover anti-counterfeiting or conformity assessment. | |
| ISO/IEC Guide 50:2014 provides guidance to experts who develop and revise standards, specifications and similar publications. It aims to address potential sources of bodily harm to children from products that... | |
| ISO/IEC Guide 51:2014 provides requirements and recommendations for the drafters of standards for the inclusion of safety aspects in standards. ISO/IEC Guide 51:2014 is applicable to any safety aspect related... | |
| ISO/IEC Guide 60:2004 recommends good practices for all elements of conformity assessment, including normative documents, bodies, systems, schemes and results. It is intended for use by individuals and bodies who... | |
| ISO/IEC Guide 63:2012 provides guidance to standards writers on how to include safety aspects in the development of medical device safety standards intended to be used within the risk management... | |
| ISO/IEC Guide 68:2002 provides an introduction to the development, issuance and operation of arrangements for the recognition and acceptance of results produced by bodies undertaking similar conformity assessment and related... | |
| ISO/IEC Guide 71:2014 provides guidance to standards developers on addressing accessibility requirements and recommendations in standards that focus, whether directly or indirectly, on systems (i.e. products, services and built environments)... | |
| ISO/IEC Guide 74:2004 gives procedures for the development of graphical symbols for public information, use in safety signs and product safety labels, and use on equipment and products. Such graphical... | |
| ISO/IEC Guide 76:2008 provides general guidance on the issues to be considered in standards for services. On the basis of this guidance, detailed standards can be prepared for any service. | |
| ISO/IEC Guide 77 provides general advice and guidance for the description of products and their characteristics by the use of the ISO 13584 and IEC 61360 series of standards for... | |
| ISO/IEC Guide 77 provides recommendations for standardization committees for the description of products and their properties for the creation of computer processable product libraries, catalogues and reference dictionaries. This description... | |
| ISO/IEC Guide 77-3:2008 provides general advice and guidance for the description of products and their characteristics by the use of ISO 13584 and IEC 61360 for the creation of computer... | |
| ISO/IEC Guide 98-1:2009 provides a brief introduction to the “Guide to the expression of uncertainty in measurement” (GUM) in order to indicate the relevance of that fundamental guide and promote... | |
| ISO/IEC Guide 98-3/Suppl.1:2008 provides a general numerical approach, consistent with the broad principles of the Guide to the expression of uncertainty in measurement (GUM), for carrying out the calculations required... | |
| ISO/IEC Guide 98-3:2008 is a reissue of the 1995 version of the Guide to the Expression of Uncertainty in Measurement (GUM), with minor corrections. This Guide establishes general rules for... | |
| ISO/IEC Guide 98-3:2008/Suppl.2:20 11 is concerned with measurement models having any number of input quantities and any number of output quantities. The quantities involved might be real or complex. Two... | |
| ISO/IEC Guide 98-4:2012 provides guidance and procedures for assessing the conformity of an item (entity, object or system) with specified requirements. The item might be, for example, a gauge block,... | |
| ISO/IEC Guide 99:2007 provides a set of definitions and associated terms, in English and French, for a system of basic and general concepts used in metrology, together with concept diagrams... | |
| ISO/IEC PAS 16898:2012 specifies a designation system as well as the shapes and dimensions for secondary lithium-ion cells for integration into battery packs and systems used in electrically propelled road... | |
| ISO/IEC TR 10032:2003 defines the ISO Reference Model of Data Management. It establishes a framework for coordinating the development of existing and future standards for the management of persistent data... | |
| ISO/IEC TR 10176:2003(E) provides guidelines for the preparation of Programming Language Standards. Standards for programming languages are developed by many committees from many countries, with many different editors supporting the... | |
| ISO/IEC TR 10182:2016 is based on experience gained in the standardization of two major areas in information processing. One area covers programming languages. The other area is composed of the... | |
| ISO/IEC TR 11580:2007 defines a format for describing user interface objects, actions and attributes. It provides a basis for standardizing the names and properties of user interface objects, actions and... | |
| ISO/IEC TR 11581-1:2011 introduces the ISO/IEC 11581 series and provides developers and other icon standards users with an overview of currently available and future anticipated icon standards. ISO/IEC TR 11581-1:2011:... | |
| ISO/IEC TR 11801-9902:2017(E) This Technical Report provides definitions for, and examples of, cabling implementations described as end-to-end (E2E) links. The document also provides performance specifications to support Class D and... | |
| ISO/IEC TR 11801-9903:2015(E) establishes a matrix-model for formulating limits for differential mode parameters for return loss, insertion loss, and near and far end crosstalk, within and between two pairs of... | |
| ISO/IEC TR 11801-9904:2017(E) This technical report provides guidance on whether installed Class D and Class E channels specified in ISO/IEC 11801:2002 will support 2,5GBASE-T and 5GBASE-T. It also provides mitigation... | |
| ISO/IEC TR 11801-9905:2018(E) This technical report provides guidance on whether installed Class D and Class E channels specified in ISO/IEC 11801:2002 will support 2,5GBASE-T and 5GBASE-T. It also provides mitigation... | |
| ISO/IEC TR 11801:2014(E) covers the following channel descriptions constructed from components with a nominal impedance of 100: - Class I: 30 m channel based on upcoming Category 8.1 components. This... | |
| ISO/IEC TR 12182 specifies the manner in which categorizations of IT systems and software are organized and expressed. It provides the framework for categorizations, and a guide for applying it. | |
| ISO/IEC TR 12785-3:2012 presents use cases and shows how they are satisfied by ISO/IEC 12785-1 which is derived from the IMS Global Learning Consortium (GLC) Content Packaging version 1.2 (v1.2). | |
| ISO/IEC TR 13066-2:2016 specifies services provided in the Microsoft Windows platform to enable assistive technologies (AT) to interact with other software. One goal of this part of ISO/IEC 13066 is... | |
| ISO/IEC TR 13066-4:2015 provides an overview to the structure and terminology of the Linux/UNIX graphical environments accessibility API. It will provide the following: - a description of the overall architecture... | |
| ISO/IEC TR 13066-6:2014 provides an overview to the structure and terminology of the Java accessibility application programming interface (API) It will provide: A description of the overall architecture and terminology... | |
| ISO/IEC TR 13066:2012 provides an overview to the structure and terminology of the IAccessible2 accessibility API. It provides: a description of the overall architecture and terminology of the API; further... | |
| ISO/IEC TR 14143-3:2003 establishes a framework for verifying the statements of an FSM Method and/or for conducting tests requested by the verification sponsor, relative to the following performance properties: repeatability... | |
| ISO/IEC TR 14143-5:2004 describes the characteristics of Functional Domains and the procedures by which characteristics of Functional User Requirements (FUR) can be used to determine Functional Domains. Two example methods... | |
| ISO/IEC TR 14369:2018 provides guidelines to those concerned with developing specifications of information technology services and their interfaces intended for use by clients of the services, in particular by external... | |
| ISO/IEC TR 14496-24:2008 describes the desired joint behavior of MPEG-4 Systems (MPEG-4 File Format) and MPEG-4 Audio codecs. It is desired that MPEG-4 Audio encoders and decoders permit finite length... | |
| ISO/IEC TR 14496-7:2004 specifies the encoding tools that enhance both the execution and quality for the coding of visual objects as defined in ISO/IEC 14496-2. There are five visual tools,... | |
| ISO/IEC TR 14496-9:2009 specifies descriptions of the main video coding tools in hardware description language (HDL) form. Such alternative descriptions to the ones that are reported in ISO/IEC 14496-2, ISO/IEC... | |
| ISO/IEC TR 15067-3-2:2016(E) This Technical Report is based on work done by the GridWise Architecture Council. It describes a framework for identifying and discussing interoperability issues to facilitate the integration... | |
| ISO/IEC TR 15440:2016 (TR) covers the following: - different input requirements catering for national and international practices and support of cultural and linguistic diversity; - recognition of requirements regarding comfort... | |
| ISO/IEC TR 15443-1:2012 defines terms and establishes an extensive and organised set of concepts and their relationships for understanding IT security assurance, thereby establishing a basis for shared understanding of... | |
| ISO/IEC TR 15443-2:2012 builds on the concepts presented in ISO/IEC TR 15443-1. It provides a discussion of the attributes of security assurance conformity assessment methods that contribute towards making assurance... | |
| ISO/IEC TR 15938-11:2005 contains the actual schema in XSD form for each of the ISO/IEC 15938-9 standard description profiles, namely the Simple Metadata Profile (SMP), User Description Profile (UDP), and... | |
| ISO/IEC TR 15938-8:2002 forms an informative part of ISO/IEC 15938 on extraction and use of metadata descriptions for multimedia content. ISO/IEC TR 15938-8:2002 provides two types of information: informative examples... | |
| ISO/IEC TR 17026:2015 provides an example of a type 5 product certification scheme for tangible products as described in ISO/IEC 17067. | |
| ISO/IEC TR 17028:2017 provides guidelines and principles of service certification schemes. | |
| ISO/IEC TR 18001:2004 provides: the result of three surveys identifying the applications for radio frequency identification (RFID) in an item management environment, and the resultant classification of these applications based... | |
| ISO/IEC TR 18016:2003 identifies documents that specify how implementations of the MHS defined in the ITU-T X.400 series Recommendations ISO/IEC 10021 may interwork with implementations of Internet e-mail. No requirements... | |
| ISO/IEC TR 18037:2008 specifies a series of extensions of the programming language C, which is specified by ISO/IEC 9899:1999. These extensions support embedded processors. | |
| ISO/IEC TR 18047-3:2011 defines test methods for determining the conformance of radio frequency identification devices (tags and interrogators) for item management with the specifications given in ISO/IEC 18000-3, but does... | |
| ISO/IEC TR 18047-4:2004 defines test methods for determining the conformance of radio frequency identification (RFID) devices (tags and interrogators) for item management with the specifications given in the corresponding part... | |
| ISO/IEC TR 18057:2003 illustrates how ECMA-323 can be used in a Voice Browser environment. These concepts illustrated in this TR can be applied to any Voice Browser environment that provides... | |
| ISO/IEC TR 18121:2015 defines the framework for IT standards and specifications on virtual experiments supporting IT-enhanced learning, education and training. It is based on implementations of standards and specifications that... | |
| ISO/IEC TR 18268:2013 presents a collation of industry experience of technical issues resulting from the presence of multiple PICCs (proximity card or object) in the field of a PCD (proximity... | |
| ISO/IEC TR 18781:2015 gives guidance on the principles and methods of testing ID cards to simulate accidental exposure to conditions encountered during the washing and drying of clothing. The physical... | |
| ISO/IEC TR 19075-1:2011 describes the regular expression support in SQL adopted from the regular expression syntax of XQuery 1.0 and XPath 2.0 Functions and Operators (Second Edition), which is derived... | |
| ISO/IEC TR 19075-5:2016 discusses the syntax and semantics for recognizing patterns in rows of a table, as defined in [ISO 9075-2]. | |
| ISO/IEC TR 19075-6:2017 describes the support in SQL for JavaScript Object Notation. ISO/IEC TR 19075-6:2017 discusses the following features of the SQL language: - Storing JSON data. - Publishing JSON... | |
| ISO/IEC TR 19075-7:2017 describes the definition and use of polymorphic table functions in SQL. ISO/IEC TR 19075-7:2017 discusses the following features of the SQL Language: - The processing model of... | |
| ISO/IEC TR 19446:2015 is applicable to driving licences which include a microchip and claim compliance to the EU Regulation on driving licences. ISO/IEC TR 19446:2015 proposes: - details that are... | |
| ISO/IEC TR 19566-1:2016 describes common elements of a system layer for JPEG standards, referred to as JPEG Systems. ISO/IEC TR 19566-1:2016 describes the common architecture of file formats and codestream... | |
| ISO/IEC TR 19755:2003 specifies a feature for finalizing objects in COBOL. The specification is a Type 2 Technical Report so that implementations can be undertaken on an experimental basis. The... | |
| ISO/IEC TR 19758:2003 provides a DSSSL (ISO/IEC 10179:1996) library that makes it feasible to describe DSSSL specification for documents described by SGML (ISO 8879:1986) or XML (Extensible Markup Language). The... | |
| ISO/IEC TR 19759:2015 characterizes the boundaries of the software engineering discipline and provides topical access to the literature supporting that discipline. | |
| ISO/IEC TR 19763-9:2015 specifies a technical guideline on how to use the Role and Goal, Process, and Service (RGPS) metamodels to select appropriate combinations of models and/or services to support... | |
| ISO/IEC TR 19764:2005 defines a methodology and a guided check-list for evaluation of cultural adaptability in software, hardware and other IT products. The check-list and guidelines are not only applicable... | |
| ISO/IEC TR 19768:2007 specifies a series of extensions to the standard library for the programming language C++, as specified by ISO/IEC 14882, in order to build more widespread existing practice... | |
| ISO/IEC TR 19788-11:2017 provides guidance in the form of rules and heuristics for the development of a conversion script from an IEEE 1484.12.1-2002 (LOM) record to an MLR data element... | |
| ISO/IEC TR 19791:2010 provides guidance and criteria for the security evaluation of operational systems. It provides an extension to the scope of ISO/IEC 15408 by taking into account a number... | |
| ISO/IEC TR 20000-11:2015 is a Technical Report that provides guidance on the relationship between ISO/IEC 20000?1:2011 and a commonly used service management framework, ITIL. It can be used by any... | |
| ISO/IEC TR 20000-12:2016 provides guidance on the relationship between ISO/IEC 20000‑1:2011 and CMMI-SVC V1.3 (through Maturity Level 3). Service providers can refer to this guidance as a cross-reference between the... | |
| ISO/IEC TR 20000-5:2013 is an exemplar implementation plan providing guidance on how to implement a service management system (SMS) to fulfil the requirements of ISO/IEC 20000-1:2011. The intended users of... | |
| ISO/IEC TR 20002:2012: a) classifies problems of P2P networking; b) defines taxonomy and concept of managed P2P; c) specifies requirements to support managed P2P; d) specifies framework for managed P2P; | |
| ISO/IEC TR 20004:2015 refines the AVA_VAN assurance family activities defined in ISO/IEC 18045 and provides more specific guidance on the identification, selection and assessment of relevant potential vulnerabilities in order... | |
| ISO/IEC TR 20007:2014 clearly defines each term related to ISO and IEC symbology in a single document and harmonizes difference of use and possible correspondence between different objects covering these... | |
| ISO/IEC TR 20017:2011 presents a test method and results for the evaluation of ISO/IEC 18000 radio frequency identification (RFID) interrogator electromagnetic interference (EMI) on implantable pacemakers and implantable cardioverter defibrillators... | |
| ISO/IEC TR 20547-2:2018 provides examples of big data use cases with application domains and technical considerations derived from the contributed use cases. | |
| ISO/IEC TR 20547-5:2018 describes big data relevant standards, both in existence and under development, along with priorities for future big data standards development based on gap analysis. | |
| ISO/IEC TR 20748-1:2016 specifies a reference model that identifies the diverse IT system requirements of learning analytics interoperability. The reference model identifies relevant terminology, user requirements, workflow and a reference... | |
| ISO/IEC TR 20748-2:2017 specifies system requirements for learning analytics systems and services. Learning analytics systems and services are assumed to be composed of independent processes and applications having diverse purposes. | |
| ISO/IEC TR 20913:2016 describes backgrounds, motivation, and general concept of holistic methodology for data centre key performance indicators (KPIs) to investigate the status of KPIs. It discusses the usefulness of... | |
| ISO/IEC TR 20943-6:2013 covers the framework for generating ontologies based on ISO/IEC 11179-3, and provides the procedure and mapping model for generating ontologies. ISO/IEC TR 20943-6:2013 describes a method to... | |
| ISO/IEC TR 2100-1:2004 describes a multimedia usage environment founded upon ubiquitous networks and aimed at encouraging new business models for trading digital content. In this environment, the traditional boundaries between... | |
| ISO/IEC TR 21000-12:2005 specifies a test bed that is designed to assist in performance assessment of MPEG-21, Scalable Video Codec (SVC) for streaming applications, and for the evaluation of resource... | |
| ISO/IEC TR 21565:2018 provides an overview of office viewing environment and colour characterization guidelines for use with office equipment, in particular colour printing devices that have digital imaging capabilities, including... | |
| ISO/IEC TR 22417:2017(E) This technical report identifies IoT scenarios and use cases based on real-world applications and requirements. The use cases provide a practical context for considerations on interoperability and... | |
| ISO/IEC TR 22446:2017 establishes a continual performance improvement (CPI) process that supports service management system (SMS) as defined in the ISO/IEC 20000 series. This process ensures successful deployment and service... | |
| ISO/IEC TR 22512:2017 provides guidance for the implementation of ISO/IEC 17982. | |
| ISO/IEC TR 22560:2017(E) This Technical Report describes the concepts, issues, objectives, and requirements for the design of an active air-flow control (AFC) system for commercial aircraft based on a dense... | |
| ISO/IEC TR 22767:2005 describes how CSTA can be used to provide a subset of CSTA call control functionality, called first party call control, for Session Initiation Protocol (SIP) user agents. | |
| ISO/IEC TR 23008-14:2018 This document provides guidance on the processing of high dynamic range (HDR) and wide colour gamut (WCG) video content. The purpose of this document is to provide... | |
| ISO/IEC TR 23008-15:2018 This document reviews approaches for processing and coding of HDR/WCG video content. The purpose of this document is to provide a set of publicly-referenceab le methods for... | |
| ISO/IEC TR 23009-3:2015 provides technical guidelines for implementing and deploying systems based on ISO/IEC 23009‑1. | |
| ISO/IEC TR 23186:2019 This document describes a framework of trust for the processing of multi-sourced data that includes data use obligations and controls, data provenance, chain of custody, security and... | |
| ISO/IEC TR 23272:2011 is intended as an aid for understanding the libraries specified in ISO 23271 (Ecma-335), Partition IV: Profiles and Libraries, which includes a machine-readable specification, in XML, of... | |
| ISO/IEC TR 24705:2005 deals with the colour reproduction properties of office devices, e. g. printers, scanners and monitors, which may depend on the device system, which includes e. g. the... | |
| ISO/IEC TR 24714-1:2008 gives guidelines for the stages in the life cycle of a system's biometric and associated elements. This covers the following: the capture and design of initial requirements,... | |
| ISO/IEC TR 24715:2006 is based on ISO/IEC 23360 (Linux Standard Base Core Specification 3.1, which was submitted to ISO/IEC on 2005/10/31 for publication), and ISO/IEC 9945:2003 edition dated 2003/8/15 with... | |
| ISO/IEC TR 24716:2007 specifies the syntax and semantics for XML support in COBOL. The purpose of ISO/IEC TR 24716:2007 is to promote a high degree of portability in implementations, even... | |
| ISO/IEC TR 24717:2009 specifies the interfaces and behaviour of a common class library for managing sets of object references in COBOL. The purpose of ISO/IEC TR 24717:2009 is to promote... | |
| ISO/IEC TR 24718:2005 gives a complete description of the motivations behind the Ada Ravenscar Profile, to show how conformant programs can be analysed and to give examples of usage. The... | |
| ISO/IEC TR 24720:2008 describes several methods for applying permanent machine-readable symbols to items - including components, parts and products - using the direct part marking (DPM) methods outlined herein. ISO/IEC... | |
| ISO/IEC TR 24722:2015 contains descriptions of and analyses of current practices on multimodal and other multibiometric fusion, including (as appropriate) references to more detailed descriptions. ISO/IEC TR 24722:2015 contains descriptions... | |
| ISO/IEC TR 24729-1:2008 provides guidance on the use of radio frequency identification (RFID) enabled labels and packaging in the supply chain. Guidance is provided for transponder selection, as well as... | |
| ISO/IEC TR 24729-2:2008 describes the potential for use of radio-frequency identification (RFID) as a significant enabler in the recycling of various types of products; notably home appliances and electronics. It... | |
| ISO/IEC TR 24729-3:2009 provides reference information and practical knowledge in the selection, installation and application of ISO/IEC 18000-6C RFID Readers. RFID Readers include fixed mounted (such as portal, conveyor, and... | |
| ISO/IEC TR 24729-4:2009 provides guidance to systems designers to help them determine potential threats to data security of the tag and tag-to-reader communication in an RFID system, and appropriate countermeasures... | |
| ISO/IEC TR 24731 provides alternative functions for the C library that promote safer, more secure programming. ISO/IEC TR 24731-1 provides simple replacement functions for the library functions of ISO/IEC 9899:1999... | |
| ISO/IEC TR 24731-1:2007 provides alternative functions for the C Library (as defined in ISO/IEC 9899:1999) that promote safer, more secure programming. The functions verify that output buffers are large enough... | |
| ISO/IEC TR 24732:2009 specifies an extension to the programming language C, specified by the International Standard ISO/IEC 9899:1999. The extension provides support for decimal floating-point arithmetic that is intended to... | |
| ISO/IEC TR 24733:2011 specifies an extension to the programming language C++, specified by ISO/IEC 14882:2003. The extension provides support for decimal floating-point arithmetic that is consistent with the specification in... | |
| ISO/IEC TR 24741:2018 describes the history of biometrics and what biometrics does, the various biometric technologies in general use today (for example, fingerprint recognition and face recognition) and the architecture... | |
| ISO/IEC TR 24748-2:2011 is a guide for the application of ISO/IEC 15288:2008. It addresses system, life cycle, process, organizational, project, and adaptation concepts, principally through reference to ISO/IEC TR 24748-1... | |
| ISO/IEC TR 24748-3:2011 is a guide for the application of ISO/IEC 12207:2008. It addresses system, life cycle, process, organizational, project, and adaptation concepts, principally through reference to ISO/IEC TR 24748-1... | |
| ISO/IEC TR 24754-2:2011 provides guidelines in the writing of formatting specifications targeted for document rendering systems supporting functionality described by ISO/IEC 24754-1. There is no scope of conformance constraints against... | |
| ISO/IEC TR 24763:2011 provides a Conceptual Reference Model that comprises categories of items, attributes, and relationships. It can be used to identify the relationships between concepts represented within an information... | |
| ISO/IEC TR 24772:2013 specifies software programming language vulnerabilities to be avoided in the development of systems where assured behaviour is required for security, safety, mission-critical and business-critical software. In general,... | |
| ISO/IEC TR 24785:2009 defines a taxonomy describing the various elements of cultural and linguistic adaptability user requirements for use in a computer environment. | |
| ISO/IEC TR 24800-1:2012 provides a global view of the JPSearch framework and describes the overall search and management process. An abstract architecture for JPSearch is described, and its components and... | |
| ISO/IEC TR 25060:2010 describes a potential family of International Standards, named the Common Industry Formats (CIF), that document the specification and evaluation of the usability of interactive systems. It provides... | |
| ISO/IEC TR 27008:2011 provides guidance on reviewing the implementation and operation of controls, including technical compliance checking of information system controls, in compliance with an organization's established information security standards. | |
| ISO/IEC TR 27016:2014 provides guidelines on how an organization can make decisions to protect information and understand the economic consequences of these decisions in the context of competing requirements for... | |
| ISO/IEC TR 27023:2015 is to show the corresponding relationship between the revised versions of ISO/IEC 27001 and ISO/IEC 27002. ISO/IEC TR 27023:2015 will be useful to all users migrating from... | |
| ISO/IEC TR 27103:2018 provides guidance on how to leverage existing standards in a cybersecurity framework. | |
| ISO/IEC TR 29110-1:2016 introduces the major concepts required to understand and use the ISO/IEC 29110 series. It introduces the characteristics and requirements of a VSE and clarifies the rationale for... | |
| ISO/IEC TR 29110-2-2:2016 provides a guide for developing a profile which is domain-specific for VSEs (Very Small Entities) business situation. It may be used by technical advisers, including consultants, to... | |
| ISO/IEC TR 29110-3-1:2015 defines the process assessment guidelines needed to meet the purpose of defined Very Small Entity (VSE) profiles. It is applicable to all VSE profiles and is compatible... | |
| ISO/IEC TR 29110-3-4:2015 provides a guide for an autonomy-based improvement method for Very Small Entities (VSEs) developing systems or software products. | |
| ISO/IEC TR 29110-3:2011 defines the process assessment guidelines and conformance requirements needed to meet the purpose of defined VSE Profiles. It is applicable to all VSE Profiles and is compatible... | |
| ISO/IEC TR 29110-5-1-1:2012 is applicable to Very Small Entities (VSEs). VSEs are enterprises, organizations, departments or projects up to 25 people. The life cycle processes described in the set of... | |
| ISO/IEC TR 29110-5-1-2:2011 is applicable to Very Small Entities (VSEs). A VSE is defined as an enterprise, organization, department or project having up to 25 people. A set of standards... | |
| ISO/IEC TR 29110-5-1-3:2017 provides management and engineering guide to the intermediate profile described in terms of business management, project management, software implementation and acquisition processes. ISO/IEC TR 29110-5-1-3:2017 is applicable... | |
| ISO/IEC TR 29123:2007 defines a series of requirement and tests used to enhance the interoperability of proximity cards (PICC) and proximity coupling devices (PCD) defined in the ISO/IEC 14443 series... | |
| ISO/IEC TR 29127:2011 identifies an example of a system based process to index, query, translate, and manage components used in querying and translating documents in multiple foreign languages, enabling learners... | |
| ISO/IEC TR 29136-3:2009 provides guidance on the mapping of the set of user needs with the provisions of a particular standard, technical report, or set of guidelines. It provides both... | |
| ISO/IEC TR 29138-2:2009 identifies a collection of documents (which it refers to as standards even though they encompass more than traditional ISO and ISO/IEC standards) that provides guidance on meeting... | |
| ISO/IEC TR 29144:2014 discusses concepts and considerations for the use of biometrics in a commercial Identity Management Solution, items that need to be considered when integrating biometrics into a commercial... | |
| ISO/IEC TR 29149:2012 explains how to provide and use time-stamping services so that time-stamp tokens are effective when used to provide timeliness, data integrity, and non-repudiation services in conjunction with... | |
| ISO/IEC TR 29154:2013 is a guide for the application of ISO/IEC 24773:2008. It addresses terminology used in ISO/IEC 24773. It also includes interpretive guidance on several clauses of ISO/IEC 24773,... | |
| ISO/IEC TR 29156:2015 provides guidance on specifying performance requirements for authentication using biometric recognition in order to achieve desired levels of security and usability for the authentication mechanism. Guidance addresses... | |
| ISO/IEC TR 29158:2011 is an engineering document intended for verifier manufacturers and application specification developers. It describes modifications which are to be considered in conjunction with the symbol quality methodology... | |
| ISO/IEC TR 29162:2012 provides guidance on how to write and read the necessary data on the use in the supply chain to each AIDC media (linear bar code and two-dimensional... | |
| ISO/IEC TR 29163-1:2009 provides an overview of the Sharable Content Object Reference Model (SCORM®) 2004 3rd Edition documentation suite, the SCORM® 2004 3rd Edition Conformance Test Suite and SCORM® 2004... | |
| ISO/IEC TR 29181-1:2012 describes the definition, general concept, problems and requirements for Future Network (FN). It also discusses a milestone for standardization on FN. The scope of ISO/IEC TR 29181-1:2012... | |
| ISO/IEC TR 29181-2:2014 describes the general characteristics of Future Network naming and addressing schemes, including problem statements, requirements, design objectives, gap analysis, and development directions. Problem Statements: The characteristics and... | |
| ISO/IEC TR 29181-3:2013 contains the problem statement and requirements for switching and routing in the Future Network, in particular: description of the requirements for carrying data over digital networks; description... | |
| ISO/IEC TR 29181-4:2013 describes the problem statements of current network and the requirements for Future Network in the mobility perspective. It mainly specifies problems of the current network in mobile... | |
| ISO/IEC TR 29181-5:2014 describes the problem statements of current network and the requirements for Future Network in the security perspective. It mainly specifies problems of the current network in security... | |
| ISO/IEC TR 29181-6:2013 describes the problem statement and requirements for the Future Network in the perspective of media transport. ISO/IEC TR 29181-6:2013 specifies: detailed description of the media transport requirements... | |
| ISO/IEC TR 29181-7:2013 describes the problem statement, requirements and a functional building block for the Future Network (FN) from the perspective of service composition. The goal of ISO/IEC TR 29181-7:2013... | |
| ISO/IEC TR 29181-8:2017 describes the problem statements of current networks and the requirements for Future Network (FN) in the Quality of Service (QoS) perspective. This document mainly specifies: - problems... | |
| ISO/IEC TR 29186:2012 is a supplement to CIE 156:2004, applicable for use in evaluating the colour gamut mapping algorithms of office colour softcopy and hardcopy equipment. ISO/IEC TR 29186:2012 defines... | |
| ISO/IEC TR 29189-9:2017 describes the general characteristics of Networking of Everything (NoE), which can be applied to Future Networks, especially from an Internet of Things (IoT) perspective. This document specifies:... | |
| ISO/IEC TR 29195:2015 provides recommended best practices and processes for automated border control systems using biometrics to verify an identity claim by a traveller that uses an ePassport or equivalent... | |
| ISO/IEC TR 29196:2018 This document consolidates information relating to successful, secure and usable implementation of biometric enrolment processes, while indicating risk factors that organisations proposing to use biometric technologies will... | |
| ISO/IEC TR 29198:2013 provides guidance on estimating how "challenging" or "stressing" is an evaluation dataset for fingerprint recognition, based on relative sample quality, relative rotation, deformation, and overlap between impressions. | |
| ISO/IEC TR 29199-1:2011 provides a technical overview and informative guidelines for applications of JPEG XR image coding as specified in Rec. ITU-T T.832 ISO/IEC 29199-2. The overview of JPEG XR... | |
| ISO/IEC TR 30102:2012 describes the general technical principles underlying Service Oriented Architecture (SOA), including principles relating to functional design, performance, development, deployment and management. It provides a vocabulary containing definitions... | |
| ISO/IEC TR 30109:2015 describes methods to enable access to a personal computing environment via the Internet, with a culturally and linguistically convenient and uniform personal user interface, on different types... | |
| ISO/IEC TR 30110:2015 builds upon the general recommendations given in ISO/IEC TR 24714‑1. It provides guidance for users (as defined in ISO/IEC 2382‑37) of biometric recognition systems on specific requirements... | |
| ISO/IEC TR 30114-1:2016 gives guidelines for the use of extensibility mechanisms in ISO/IEC 29500 (Office Open XML). In particular, it makes clear which of these mechanisms supports lossless round tripping. | |
| ISO/IEC TR 30117:2014 summarizes how the international standards, recommendations and technical reports dealing with identification cards, biometrics and/or information security relate to each other with regard to the joint use... | |
| ISO/IEC TR 30125:2016 provides guidance for developing a consistent and secure method of biometric (either alone or supported by non-biometric) personalization and authentication in a mobile environment for systems procured... | |
| ISO/IEC TR 30132-1:2016 establishes guidelines for improving the energy effectiveness for computing models. Specifically, this document provides - a reference computing model for evaluating end-to-end energy effectiveness, - a holistic... | |
| ISO/IEC TR 33014:2013 provides informative guidance on using process assessment as part of a complete framework and method for performing process improvement as part of a continual improvement activity. It... | |
| ISO/IEC TR 38502:2017 provides guidance on the nature and mechanisms of governance and management together with the relationships between them, in the context of IT within an organization. The purpose... | |
| ISO/IEC TR 38504:2016 provides guidance on the information required to support principles-based standards in the area of governance and management of information technology. Guidance includes general recommendations, identification of elements... | |
| ISO/IEC TR 38505-2:2018 This document provides guidance to the members of governing bodies of organizations and their executive managers on the implications of ISO/IEC 38505-1 for data management. It assumes... | |
| ISO/IEC TS 11581-41:2014 provides guidance for developers and designers creating and/or using icons and provides a basis for the standardization of icons. It also provides a framework for creating future... | |
| ISO/IEC TS 15504-8:2012 provides an example of an IT Service Management Process Assessment Model (PAM) for use in performing a conformance assessment in accordance with the requirements of ISO/IEC 15504-2. | |
| ISO/IEC TS 15504-9:2011 documents guidelines for target process profiles for capability determination and improvement purposes. It provides guidance for establishing target process profiles for the following purposes: by or on... | |
| ISO/IEC TS 17021-10:2018 specifies additional competence requirements for personnel involved in the audit and certification process for an occupational health and safety (OH&S) management system and complements the existing requirements... | |
| ISO/IEC TS 17021-4:2013 complements the existing requirements of ISO/IEC 17021:2011. It specifies additional competence requirements for personnel involved in the audit and certification process for event sustainability management systems (ESMS). | |
| ISO/IEC TS 17021-5:2014 complements the existing requirements of ISO/IEC 17021:2011. It specifies additional competence requirements for personnel involved in the certification process for asset management systems. | |
| ISO/IEC TS 17021-6:2014 complements the existing requirements of ISO/IEC 17021:2011. It includes specific competence requirements for personnel involved in the certification process for business continuity management systems (BCMS). | |
| ISO/IEC TS 17021-7:2014 complements the existing requirements of ISO/IEC 17021:2011. It includes specific competence requirements for personnel involved in the certification process for road traffic safety (RTS) management systems. | |
| ISO/IEC TS 17021-9:2016 complements the existing requirements of ISO/IEC 17021‑1. It includes specific competence requirements for personnel involved in the certification process for anti-bribery management systems (ABMS). | |
| ISO/IEC TS 17022:2012 contains requirements and recommendations to be addressed in a third-party management system certification audit report based on the relevant requirements in ISO/IEC 17021. | |
| ISO/IEC TS 17027:2014 specifies terms and definitions related to the competence of persons used in the field of certification of persons, in order to establish a common vocabulary. These terms... | |
| ISO/IEC TS 17961:2013 specifies rules for secure coding in the C programming language, and code examples. ISO/IEC TS 17961:2013 does not specify the mechanism by which these rules are enforced,... | |
| ISO/IEC TS 18508:2015 specifies the form and establishes the interpretation of facilities that extend the For-tran language defined by ISO/IEC 1539-1:2010, ISO/IEC 1539-1:2010/Cor 1:2012, and ISO/IEC 1539-1:2010/Cor 2:2013. The purpose... | |
| ISO/IEC TS 18661-1:2014 extends programming language C to support binary floating-point arithmetic conforming to ISO/IEC/IEEE 60559:2011. It covers all requirements of IEC 60559 as they pertain to C floating types... | |
| ISO/IEC TS 18661-3:2015 extends programming language C to include types with the arithmetic interchange and extended floating-‐point formats specified in ISO/IEC/IEEE 60559:2011, and to include functions that support the non-‐arithmetic... | |
| ISO/IEC TS 18661-4:2015 extends programming language C to include functions specified and recommended in ISO/IEC/IEEE 60559:2011. | |
| ISO/IEC TS 18661-5:2016 extends programming language C to include support for attributes specified and recommended in ISO/IEC/IEEE 60559:2011. | |
| ISO/IEC TS 18822:2015 specifies requirements for implementations of an interface that computer programs written in the C++ programming language may use to perform operations on file systems and their components,... | |
| ISO/IEC TS 19216:2018 describes extensions to the C++ Standard Library. This document specifies requirements for implementations of an interface that computer programs written in the C++ programming language may use... | |
| ISO/IEC TS 19217:2015 describes extensions to the C++ Programming Language (1.2) that enable the specification and checking of constraints on template arguments, and the ability to overload functions and specialize... | |
| ISO/IEC TS 19568:2017 describes extensions to the C++ Standard Library (1.2). These extensions are classes and functions that are likely to be used widely within a program and/or on the... | |
| ISO/IEC TS 19570:2018 This document describes requirements for implementations of an interface that computer programs written in the C++ programming language can use to invoke algorithms with parallel execution. The... | |
| ISO/IEC TS 19608:2018 This document provides guidance for: - selecting and specifying security functional requirements (SFRs) from ISO/IEC 15408-2 to protect Personally Identifiable Information (PII); - the procedure to define... | |
| ISO/IEC TS 19841:2015 describes extensions to the C++ Programming Language (1.3) that enable the specification of Transactional Memory. These extensions include new syntactic forms and modifications to existing language and... | |
| ISO/IEC TS 20071-11:2012 applies to all static images that are used in any type of electronic document. It also applies to individual images within a slide show of electronic images. | |
| ISO/IEC TS 20071-15:2017 provides guidance on various aspects of the user interface of applications that scan visual information that are used directly by humans, including: - initiating the scanning application; | |
| ISO/IEC TS 20071-21:2015 provides recommendations for describing audiovisual content in an auditory modality for use in recorded video presentations, broadcast television, cinema, live or recorded drama, museum and art gallery... | |
| ISO/IEC TS 20071-25:2017 provides recommendations on the audio presentation of captions/subtitles and other on-screen text for use in all type of videos regardless of the language and technology being used... | |
| ISO/IEC TS 20540:2018 This document provides recommendations and checklists which can be used to support the specification and operational testing of cryptographic modules in their operational environment within an organization's... | |
| ISO/IEC TS 21425:2017 describes extensions to the C++ Programming Language (2) that permit operations on ranges of data. These extensions include changes and additions to the existing library facilities as... | |
| ISO/IEC TS 21544:2018 This document describes extensions to the C++ Programming Language (Clause 2) that introduce modules, a functionality for designating a set of translation units by symbolic name and... | |
| ISO/IEC TS 22237-1:2018: a) details the issues to be addressed in a business risk and operating cost analysis enabling application of an appropriate classification of the data centre; b) defines... | |
| ISO/IEC TS 22237-2:2018 addresses the construction of buildings and other structures which provide accommodation for data centres based upon the criteria and classification for "physical security" within ISO/IEC TS 22237‑1... | |
| ISO/IEC TS 22237-3:2018 addresses power supplies to, and power distribution within, data centres based upon the criteria and classifications for "availability", "physical security" and "energy efficiency enablement" within ISO/IEC TS... | |
| ISO/IEC TS 22237-4:2018 addresses environmental control within data centres based upon the criteria and classifications for "availability", "security" and "energy efficiency enablement" within ISO/IEC TS 22237‑1. ISO/IEC TS 22237-4:2018 specifies... | |
| ISO/IEC TS 22237-5:2018 addresses the physical security of data centres based upon the criteria and classifications for "availability", "security" and "energy efficiency enablement" within ISO/IEC TS 22237‑1. ISO/IEC TS 22237-5:2018... | |
| ISO/IEC TS 22237-5:2018 addresses the wide range of telecommunications cabling infrastructures within data centres based upon the criteria and classifications for "availability" within ISO/IEC TS 22237‑1. ISO/IEC TS 22237-5:2018 specifies... | |
| ISO/IEC TS 22237-5:2018 addresses the wide range of telecommunications cabling infrastructures within data centres based upon the criteria and classifications for "availability" within ISO/IEC TS 22237-1. ISO/IEC TS 22237-5:2018 specifies... | |
| ISO/IEC TS 22237-7:2018 specifies processes for the management and operation of data centres. The primary focus of this document is the operational processes necessary to deliver the expected level of... | |
| ISO/IEC TS 24748-1:2016 provides guidelines for the life cycle management of systems and software, complementing the processes described in ISO/IEC/IEEE 15288 and ISO/IEC 12207. This Technical Specification: - addresses systems... | |
| ISO/IEC TS 24748-6:2016 - specifies activities and processes to be implemented for engineering the integration of systems-of-interest throughout the life cycle (systems made of products and/or services; see Note 1),... | |
| ISO/IEC TS 25011:2017 is applicable to IT services that support the needs of an individual user or a business. IT services can be delivered personally or remotely by people, or... | |
| ISO/IEC TS 27034-5-1:2018 defines XML Schemas that implement the minimal set of information requirements and essential attributes of ASCs and the activities and roles of the Application Security Life Cycle... | |
| ISO/IEC TS 29003:2018: ? gives guidelines for the identity proofing of a person; ? specifies levels of identity proofing, and requirements to achieve these levels. ISO/IEC TS 29003:2018 is applicable... | |
| ISO/IEC TS 29113:2012 specifies the form and establishes the interpretation of facilities that extend the Fortran language defined by ISO/IEC 15391:2010. The purpose of ISO/IEC TS 29113:2012 is to promote... | |
| ISO/IEC TS 29140-1:2011 provides guidance regarding learning, education and training (LET) situations in which learners are nomadic (travel from place to place, from one location to another or require access... | |
| ISO/IEC TS 29140-2:2011 provides a learner information model specific to mobile learning that can be used as a reference by software developers, implementers, instructional designers, trainers, automated systems, and learning... | |
| ISO/IEC TS 33030:2017 contains an exemplar documented assessment process, and serves as guidance on the nature of activities required by this document. The content of this exemplar contains the minimum... | |
| ISO/IEC TS 33052:2016 defines a process reference model (PRM) for the domain of information security management. The model architecture specifies a process architecture for the domain and comprises a set... | |
| ISO/IEC TS 33072:2016: - defines a process assessment model (PAM) that meets the requirements of ISO/IEC 33004 and that supports the performance of an assessment of process capability by providing... | |
| ISO/IEC TS 33073:2017: - defines an integrated PRM and PAM that meets the requirements of ISO/IEC 33004 and that supports the performance of an assessment by providing indicators for guidance... | |
| ISO/IEC TS 38501:2015 provides guidance on how to implement arrangements for effective governance of IT within an organization. | |
| ISO/IEC/IEEE 12207:2017 also provides processes that can be employed for defining, controlling, and improving software life cycle processes within an organization or a project. The processes, activities, and tasks of... | |
| ISO/IEC/IEEE 15288:2015 establishes a common framework of process descriptions for describing the life cycle of systems created by humans. It defines a set of processes and associated terminology from an... | |
| ISO/IEC/IEEE 15289:2017 specifies the purpose and content of all identified systems and software life-cycle and service management information items (documentation). The information item contents are defined according to generic document... | |
| ISO/IEC/IEEE 15939:2017 provides an elaboration of the measurement process from ISO/IEC 15288 and ISO/IEC 12207. The measurement process is applicable to system and software engineering and management disciplines. The process... | |
| ISO/IEC/IEEE 16326:2009 provides normative content specifications for project management plans covering software projects, and software-intensive system projects. It also provides detailed discussion and advice on applying a set of project... | |
| ISO/IEC/IEEE 18883:2016 is a specification which provides security service enhancements for the protocol defined in IEEE Std 1888™1, IEEE Standard for Ubiquitous Green Community Control Network Protocol. This standard describes... | |
| ISO/IEC/IEEE 21450:2010 provides a common basis for members of the ISO/IEC/IEEE 21451 series of International Standards to be interoperable. It defines the functions that are to be performed by a... | |
| ISO/IEC/IEEE 21451-1:2010 defines an object model with a network-neutral interface for connecting processors to communication networks, sensors, and actuators. The object model contains blocks, services, and components; it specifies interactions... | |
| ISO/IEC/IEEE 21451-2:2010 defines a digital interface for connecting transducers to microprocessors. It describes a Transducer Electronic Data Sheet (TEDS) and its data formats. It defines an electrical interface, read and... | |
| ISO/IEC/IEEE 21451-4:2010 defines the protocol and interface that allows analog transducers to communicate digital information with an ISO/IEC/IEEE 21451 object. It also defines the format of the Transducer Electronic Data... | |
| ISO/IEC/IEEE 21451-7:2011 defines data formats to facilitate communications between radio frequency identification (RFID) systems and smart RFID tags with integral transducers (sensors and actuators). It defines new Transducer Electronic Data... | |
| ISO/IEC/IEEE 23026:2015 defines system engineering and management requirements for the life cycle of websites, including strategy, design, engineering, testing and validation, and management and sustainment for Intranet and Extranet environments. | |
| ISO/IEC/IEEE 24748-1:2018 This document provides guidelines for the life cycle management of systems and software, complementing the processes described in ISO/IEC/IEEE 15288 and ISO/IEC/IEEE 12207. This document: - addresses systems... | |
| ISO/IEC/IEEE 24748-5:2017 provides a common framework for planning and controlling the technical processes and activities to produce and sustain software products. The complete life cycle is covered by this document,... | |
| ISO/IEC/IEEE 24765:2017 provides a common vocabulary applicable to all systems and software engineering work. It was prepared to collect and standardize terminology. ISO/IEC/IEEE 24765:2017 is intended to serve as a... | |
| ISO/IEC/IEEE 26512:2018 This document supports the interest of system users in having consistent, complete, accurate, and usable information. It addresses both available approaches to standardization: a) process standards, which specify... | |
| ISO/IEC/IEEE 26531:2015 states requirements for efficient development and management of content produced throughout the life-cycle of a system and software product; for the provision of user documentation for systems and... | |
| ISO/IEC/IEEE 29119-4:2015 defines test design techniques that can be used during the test design and implementation process that is defined in ISO/IEC/IEEE 29119‑2. ISO/IEC/IEEE 29119-4:2015 is intended for, but not... | |
| ISO/IEC/IEEE 29119-5:2016 defines an efficient and consistent solution for Keyword-Driven Testing by: giving an introduction to Keyword-Driven Testing; providing a reference approach to implement Keyword-Driven Testing; defining requirements on frameworks... | |
| ISO/IEC/IEEE 29148:2018 This document: — specifies the required processes implemented in the engineering activities that result in requirements for systems and software products (including services) throughout the life cycle; — | |
| ISO/IEC/IEEE 31320-1:2012 identifies the basic components of Integration Definition 0 (IDEF0) syntax (the drawn, visual elements of the language and how they may be used together) and IDEF0 semantics (what... | |
| ISO/IEC/IEEE 31320-2:2012 describes the semantics and syntax of IDEF1X, a language used to represent a conceptual schema. Two styles of IDEF1X model are described. The key style is used to... | |
| ISO/IEC/IEEE 42010:2011 addresses the creation, analysis and sustainment of architectures of systems through the use of architecture descriptions. A conceptual model of architecture description is established. The required contents of... | |
| ISO/IEC/IEEE 8802-15-4:2018 defines the physical layer (PHY) and medium access control (MAC) sublayer specifications for low-data-rate wireless connectivity with fixed, portable, and moving devices with no battery or very limited... | |
| ISO/IEC/IEEE 90003:2018 This International Standard specifies requirements for a quality management system when an organization: a) needs to demonstrate its ability to consistently provide products and services that meet customer... | |
| ISO/IEC/IEEE 9945:2008 defines a standard operating system interface and environment, including a command interpreter (or "shell"), and common utility programs to support applications portability at the source code level. ISO/IEC/IEEE... | |
| ISO/IEC/TR 29106:2007+A1:2012(E ) This Technical Report acts as an introduction to the concepts used to develop the MICE environmental classification system used in cabling standards developed by ISO/IEC. It also... | |
| ISO/IEC/TR 29108:2013(E) specifies the terminology recommended for future use in International Standards and other specifications for intelligent homes. In addition, it provides a collection of terms and definitions as already... | |
| ISO/IEC/TS 18661-2:2015 extends programming language C as specified in ISO/IEC 9899:2011, (C11) with changes specified in ISO/IEC/TS 18661-1, to support decimal floating-point arithmetic conforming to ISO/IEC/IEEE 60559:2011. It covers all... | |
| ISO/IEC/TS 20013:2015 details a reference framework of e-Portfolio implementation that can be used to inform and support development of ITLET systems that meet the requirements of learners, instructors, e-learning service... | |
| ISO/IEEE 11073-10102:2014 extends the IEEE 11073-10101 Nomenclature by providing support for ECG annotation terminology. It may be used either in conjunction with other IEEE 11073 standards (e.g. ISO/IEEE 11073-10201:2001) or... | |
| ISO/IEEE 11073-10103:2014 extends the base nomenclature provided in IEEE 11073 to support terminology for implantable cardiac devices. Devices within the scope of this nomenclature are implantable devices such as pacemakers,... | |
| ISO/IEEE 11073-10404:2010 establishes a normative definition of communication between personal telehealth pulse oximeter devices and computer engines (e.g., cell phones, personal computers, personal health appliances, set top boxes) in a... | |
| ISO/IEEE 11073-10407:2010 establishes a normative definition of communication between personal telehealth blood pressure monitor devices and computer engines (e.g., cell phones, personal computers, personal health appliances, and set top boxes)... | |
| ISO/IEEE 11073-10408:2010 establishes a normative definition of communication between personal telehealth thermometer devices and computer engines (e.g., cell phones, personal computers, personal health appliances, and set top boxes) in a... | |
| ISO/IEEE 11073-10415:2010 establishes a normative definition of communication between personal telehealth weighing scale devices and computer engines (e.g., cell phones, personal computers, personal health appliances, and set top boxes) in... | |
| ISO/IEEE 11073-10418:2013 establishes a normative definition of communication between personal telehealth International Normalized Ratio (INR) devices (agents) and managers (e.g. cell phones, personal computers, personal health appliances and set top... | |
| ISO/IEEE 11073-10419:2016 defines the device specialization for the insulin pump, being a specific agent type, and provides a description of the device concepts, its capabilities, and its implementation according to... | |
| ISO/IEEE 11073-10427:2018 establishes a normative defi nition of communication between devices containing a power source (agents) and managers (e.g., cell phones, personal computers, personal health appliances, set-top boxes) in a... | |
| ISO/IEEE 11073-10471:2010 establishes a normative definition of the communication between independent living activity hubs and managers (e.g., cell phones, personal computers, personal health appliances and set top boxes) in a... | |
| ISO/IEEE 11073-20101:2004 provides the upper layer [i.e., the International Organization for Standardization's (ISO's) open systems interconnection (OSI) application, presentation layer, and session layer] services and protocols for information exchange under... | |
| ISO/IEEE 11073-30200:2004 describes an IrDA-based, cable-connected local area network (LAN) for the interconnection of computers and medical devices and is suitable for new device designs, but is particularly targeted to... | |
| ISO/IEEE 11073-30300:2004 defines an IrDA-based transport profile for medical device communication that uses short-range infrared, as a companion standard to ISO/IEEE 11073-30200, which specifies a cable-connected physical layer. ISO/IEEE 11073-30300:2004... | |
| ISO/OECD 789-10:2006 specifies tests for determining the hydraulic pressure at the external hydraulic service of an agricultural tractor/implement as specified in ISO 10448, as well as companion tests for measuring... | |
| ISO/PAS 12158 presents methods for measuring the temperature of braking systems in road vehicles. It is applicable to both disc and drum brakes fitted on passenger cars and commercial vehicles,... | |
| ISO/PAS 12835:2013 is intended for assessment of casing connections for those field applications in which the design of the casing-connection system is strain-based, and in which primary axial loading is... | |
| ISO/PAS 13396:2009 mainly summarises the content of ISO/TR 14646 to assist the Informal Group on CRS of UNECE/GRSP in their development of a simplified side impact method based on commonly... | |
| ISO/PAS 15339-1:2015 establishes principles for the use of colour characterization data as the definition of the intended relationship between input data and printed colour for copy preparation, job assembly, proofing,... | |
| ISO/PAS 15339-2 specifies a limited number of characterized reference printing conditions that span the expected range of colour gamuts used for the production of printed materials from digital data, regardless... | |
| ISO/PAS 17506:2012 describes the COLLADA schema. COLLADA is a COLLAborative Design Activity that defines an XML-based schema to enable 3D authoring applications to freely exchange digital assets without loss of... | |
| ISO/PAS 18167:2014 sets out the requirements for installing textile floor coverings (carpets). It gives details of the work necessary in preparing subfloor surfaces together with the procedures that are to... | |
| ISO/PAS 18761:2013 covers requirements for risk assessment on mucocutaneous blood and bodily fluid exposure in relation to the handling of medical devices for the administration of medicinal products covered by... | |
| ISO/PAS 19295:2016 provides specification of voltage sub-classes for electric propulsion systems and conductively connected auxiliary electric systems of electrically propelled road vehicles. The voltage sub-classes are related to d.c. electric... | |
| ISO/PAS 19363:2017 defines the requirements and operation of the on-board vehicle equipment that enables magnetic field wireless power transfer (MF-WPT) for traction battery charging of electric vehicles. It is intended... | |
| ISO/PAS 19450:2015 specifies Object-Process Methodology (OPM) with detail sufficient for enabling practitioners to utilise the concepts, semantics, and syntax of Object-Process Methodology as a modelling paradigm and language for producing... | |
| ISO/PAS 19451-1:2016 is applicable to developers who are evaluating the use of semiconductor components or parts in hardware components, systems, or items developed according to ISO 26262. | |
| ISO/PAS 19451-2:2016 is applicable to developers who are evaluating the use of hardware qualification for semiconductor elements according to ISO 26262‑8:2011, Clause 13. | |
| ISO/PAS 19695:2015 is intended to be applied to safety-related systems that include one or more electrical and/or electronic (E/E) systems and that are installed in series production two-wheeled or three-wheeled... | |
| ISO/PAS 20065:2016 describes a method for the objective determination of the audibility of tones in environmental noise. It is intended to augment the usual method for evaluation on the basis... | |
| ISO/PAS 21195:2018 specifies technical requirements for systems designed to detect a person who has gone overboard from a passenger ship. This document addresses how a system is expected to perform... | |
| ISO/TR 10017:2003 provides guidance on the selection of appropriate statistical techniques that may be useful to an organization in developing, implementing, maintaining and improving a quality management system in compliance... | |
| ISO/TR 10064-1:2017 supplements ISO 1328‑1:2013. It provides a code of practice dealing with measurements on flanks of individual cylindrical involute gears, i.e. with the measurement of pitch, profile, helix and... | |
| ISO/TR 10064-5:2005 provides additional information and examples to support the implementation of ISO 18653. It proposes evaluation and calibration procedures for involute, helix, pitch, runout, and tooth thickness measurement processes. | |
| ISO/TR 10064-6:2009 provides information on measuring methods and practices of unassembled bevel and hypoid gears and gear pairs. It includes methods and practices, which permit the manufacturer and purchaser to... | |
| ISO/TR 10255:2009 gives recommendations and provides guidance for maintaining archival optical disk collections. It describes the various services that would be necessary for the management of an optical media‑based system... | |
| ISO/TR 10300-30:2017 provides sample calculations for different bevel gear designs, how the load capacity is numerically determined according to the methods and formulae of the ISO 10300 series. The initial... | |
| ISO/TR 10305-1:2003 specifies techniques for calibrating field strength measuring devices used in automotive testing for the measurement of magnetic fields at frequencies greater than 0 Hz, for both EMC and... | |
| ISO/TR 10305-2:2003 specifies techniques for calibrating electromagnetic field sensors and probes, excluding antennas, used in automotive testing for the measurement of magnetic fields at frequencies from 9 kHz to 40... | |
| ISO/TR 10465-2:2007 presents a comparison of the ATV and AWWA methods for static calculations on underground GRP pipe installations. It is intended that this comparison will encourage the use of... | |
| ISO/TR 10686:2013 describes methods that can be used to: relate the cleanliness of a hydraulic system to the cleanliness of its components and the hydraulic fluid belonging to the system; | |
| ISO/TR 10687:2012 summarizes descriptive quantities for those responsible (e.g. scientists, safety engineers) for determination of postures for a seated person who is exposed to whole-body vibration. It is the intention... | |
| ISO/TR 10688:2015 provides a summary of the formulae used for determining the optical properties of pulp, paper and board. This Technical Report is to be used in conjunction with the... | |
| ISO/TR 10771-2:2008 specifies a test method for fatigue rating of the pressure-containing envelopes of components used in hydraulic fluid power systems, as tested under steady internal cyclic pressure loads in... | |
| ISO/TR 10828:2015, thread profiles of the five most common types of worms at the date of publication are described and formulae of their axial profiles are given. The five worm... | |
| ISO/TR 10929:2012 identifies the basic properties of multiwall carbon nanotubes (MWCNTs) and the content of impurities, which characterize bulk samples of MWCNTs, and highlights the major measurement methods available to... | |
| ISO/TR 10949:2002 gives guidelines for achieving, evaluating and controlling the cleanliness of hydraulic fluid power components from the time of their manufacture through to their installation in a hydraulic fluid... | |
| ISO/TR 10982:2013 outlines a number of test procedures that can be used for investigating the interactions that could occur between the deploying air bag and the occupant who is near... | |
| ISO/TR 10989:2009 covers: the results of a study into, and comparison between, existing classification and categorization schemes for reference materials, the development of reference material (RM) features and characteristics upon... | |
| ISO/TR 10992-2:2017 specifies the introduction of multimedia and telematics nomadic devices in the public transport and automotive world to support intelligent transport systems (ITS) service provisions and multimedia use such... | |
| ISO/TR 10992:2011 specifies the introduction of multimedia and telematics nomadic devices in the public transport and automotive world to support intelligent transport systems (ITS) service provisions and multimedia use such... | |
| ISO/TR 10993-22:2017 describes considerations for the biological evaluation of medical devices that are composed of or contain nanomaterials. In addition, this guidance can also be used for the evaluation of... | |
| ISO/TR 11044:2008 discusses scientific and technical aspects that have been considered in connection with the development of batch algal growth inhibition test procedures specified in ISO 8692, for freshwater, and... | |
| ISO/TR 11071-1:2004 consists of a comparison of the requirements of selected topics as covered by the following worldwide safety standards (excluding regional or national deviations): CEN - European Standard EN... | |
| ISO/TR 11146-3:2004 specifies methods for measuring beam widths (diameter), divergence angles and beam propagation ratios of laser beams in support of ISO 11146-1. It provides the theoretical description of laser... | |
| ISO/TR 11150:2007 describes the various means of estimating hydrocarbon dew point and hydrocarbon content of natural gas. | |
| ISO/TR 11219:2012 specifies data for the planning of library buildings. It also provides guidance on the selection of technical building equipment for the different functional areas of libraries. ISO/TR 11219:2012... | |
| ISO/TR 11225:2012 provides guidelines for selected reference and standard atmospheric models for use in engineering design or scientific research. It describes the content of the models, uncertainties and limitations, technical... | |
| ISO/TR 11233:2014 prescribes the manner in which orbit determination and estimation techniques are to be described so that parties can plan operations with sufficient margin to accommodate different individual approaches... | |
| ISO/TR 11360:2010 describes a classifying system, termed a “nano-tree”, upon whose basis wide ranges of nanomaterials can be categorized, including nano-objects, nanostructures and nanocomposites of various dimensionality of different physical,... | |
| ISO/TR 11364:2012 lists the different valve stem to gas cylinder connection threads currently and historically existing worldwide and provides official coded designations for them. These coded designations will then be... | |
| ISO/TR 30112:2014 specifies description formats and functionality for the specification of cultural conventions, description formats for character sets, and description formats for binding character names to ISO/IEC 10646, plus a... | |
| L'ISO/IEEE 11073-30400:2012 traite de l'application de la famille de protocoles Ethernet (IEEE 802.3-2008) destinés à être utilisés dans une communication de dispositifs médicaux. Le domaine d'application est limité au référencement... | |
| Message Authentication Code (MAC) algorithms are data integrity mechanisms that compute a short string (the Message Authentication Code or MAC) as a complex function of every bit of the data... | |
| MPEG-21 provides a framework within which many elements of multimedia are brought together. In particular, coded representations of content are juxtaposed with metadata descriptors and IPMP protection that apply to... | |
| MPEG-A facilitates the swift development of innovative, standards-based multimedia applications and services. To this end, the MPEG-A introduces a set of standardized Multimedia Application Formats (MAFs), together with their related... | |
| OASIS Open Document Format ODF 1.0 (ISO/IEC 26300) and Office Open XML (ISO/IEC 29500) are both open document formats for saving and exchanging word processing documents, spreadsheets and presentations. Both... | |
| Physical security mechanisms are employed by cryptographic modules where the protection of the modules sensitive security parameters is desired. ISO/IEC TS 30104:2015 addresses how security assurance can be stated for... | |
| Presents a compilation of legal specifications of the United Nation Conference of Road Traffic, North America, Europe, Australia and Japan and shall be used when the lighting and light signalling... | |
| Presents and describes a means of identifying where new or revised manufacturing standards may be required. Establishes a reference model which is then used as the basis for developing a... | |
| Procurements of biometric systems often stipulate requirements for the systems to be inclusive and make provision for exception handling. ISO/IEC TR 29194:2015 provides guidance for biometric system design and procurement... | |
| Provides a framework in which OSI protocols for routeing may be developed and to expedite the progression of routeing protocols through the standardisation process. Reflects the current state of OSI... | |
| Provides general guidance on the manner on which data can be expressed by codes. Describes the objectives of coding, the characteristics, advantages and disadvantages of different coding methods, the features... | |
| Provides guidance for assessors and testing laboratories on the specific interpretation of the accreditation requirements applicable to testing (including validation of means of testing and test tools) in the field... | |
| Provides guidance on measurement techniques for 90 mm rewritable/read only optical disk cartridges. This technical report is to aid the understanding of interchangeability between disks and drives. | |
| Provides guidelines for the control scenario including formatting, defect management, the usage of control zone data, etc. of drives which claim conformance to ISO/IEC 10090, in order to achieve better... | |
| Provides information on the protocol combinations that are usually used to provide and support the OSI Network Service in the commonly available network environments. Section 2 provides information for the... | |
| Provides recommended values for dimensional deviations on blanks, centre distance and parallelism of axes of gears. Numerical values given are not to be regarded as strict ISO quality criteria, but... | |
| Provides the PICS proforma for the detailed expression of the conformance requirements of CCITT Rec. X.711 / ISO/IEC 9596-1. This PICS proforma is in compliance with the relevant requirements and... | |
| Refines the description of the application layer contained in the basic reference model for OSI (ITU-T Rec. X.200 / ISO/IEC 7498-1). Provides a framework for coordinating the development of existing... | |
| Replaces in clause A.5.5, table A.98, index A.98.3.1.1 "o" in Sts column with "m". | |
| Replaces the first edition (ISO/IEC 9576:1991). | |
| Requirements engineering (RE) is an essential process of the systems and software engineering life cycles. RE has been established as an ISO/IEC standard life cycle process in both ISO/IEC 15288:2008,... | |
| Since the extensions described in this ISO/IEC TS 19571:2016 are experimental and not part of the C++ standard library, they should not be declared directly within namespace std. Unless otherwise... | |
| Specifies a character encoding of the computer graphics interface. For each of the functions specified in ISO/IEC 9636 an encoding is specified. The encoding provides a highly compact representation of... | |
| Specifies a connectionless session protocol. A connection-oriented session protocol is specified in ITU-T-Rec. X.225 (ISO/IEC 8327-1). | |
| Specifies a framework for the development of abstract test cases, specifies a test case notation used to specify abstract test cases, and gives examples of abstract test cases. The purpose... | |
| Specifies a language independent nucleus of a graphics system. Describes the FORTRAN language dependent layer. | |
| Specifies a language independent nucleus of a graphics system. Specifies also a language dependent layer for the C language. Annexes A, B, C, D and E are for information only. | |
| Specifies mid-span power insertion into generic cabling as specified in ISO/IEC 11801, the location and allocation requirements in case of the replacement of a generic cabling component or components. | |
| Specifies the contents of register entries recording information about OSI document types, and assigning an unambiguous name of ASN.1 type object identifier to OSI document type definitions and the procedures... | |
| Specifies the contents of register entries recording information about VT control object definitions and assigning unambiguous names of ASN.1 type object identifier to VT CO definitions. | |
| Specifies the contents of register entries recording information about VTE-profiles and assigning unambiguous names of ASN.1 type object identifier to VTE-profile definitions. | |
| Specifies the method of providing in accordance with the procedures described in Recommendation X.31. This is done by specifying the mapping of the CONS primitives and parameters to and from... | |
| Specifies the requirements and provides guidance for the production of Profile Test Specifications (PTSs) for conformance testing of OSI protocol profiles. Also specifies requirements concerning the expression of conformance requirements... | |
| Standards are developed by many bodies at national and international levels, which in general prepare their documents by consensus processes. Alongside the growth of international trade and technological cooperation, standardizing... | |
| The aim of ISO/IEC TR 18015 is to: give the reader a model of time and space overheads implied by use of various C++ language and library features; debunk widespread... | |
| The CLI standard libraries (ISO/IEC 23271) provide a collection of common types that can be used by multiple languages. With the addition of generics to the CLI, the standard libraries... | |
| The computer graphics interface (CGI) (ISO/IEC 9636) specifies a language independent standard interface between device-independent and device-dependent parts of a graphics system. For integration in a programming language, CGI is... | |
| The home electronic system (HES) provides a common method for interfacing equipment with a variety of home control systems (HCS) such as sensors, actuators, appliances, user interfaces, controllers, switches etc. | |
| The ISO/IEC 13249 series defines a number of packages of generic data types common to various kinds of data used in multimedia and application areas, to enable that data to... | |
| The materials covered by the classification are: low-density polyethylene; high-density polyethylene; polypropylene; Poly(vinyl chloride), unplasticized; Poly(vinyl chloride), chlorinated; polybutene; Acrylonitrile/butadi ene/styrene; Poly(vinylidene fluoride); cross-linked polyethylene. Three classes are distinguished: satisfactory... | |
| The models defined in ISO/IEC 9594-2:2017 provide a conceptual and terminological framework for the other ITU-T X.500-series Recommendations | parts of ISO/IEC 9594 which define various aspects of the Directory. | |
| The purpose of ISO/IEC TR 20943-5:2013 is to describe a procedure for establishing metadata crosswalks based on the ISO/IEC 11179 series, subsequently improving mapping quality between metadata. Therefore, ISO/IEC TR... | |
| The purpose of ISO/IEC TR 29189:2015 is to identify and characterize those aspects of performance testing that are unique to examiner assisted biometric applications. | |
| The purpose of ISO/TR 10809-1:2009 is to assist the designer and engineer in understanding the family of cast iron materials and to utilize them with a more complete knowledge of... | |
| The purpose of ISO/TR 10809-2:2011 is to assist the design engineer to understand and to acquire knowledge of how the family of cast iron materials can be welded and to... | |
| The purpose of the ISO/IEC/IEEE 29119 series of software testing standards is to define an internationally-agre ed set of standards for software testing that can be used by any organization... | |
| The purpose of this technical report is to describe a set of procedures for the consistent registration of value domains and their attributes in a registry. This technical report is... | |
| The scope of ISO/TS 30103:2015 is to indicate how to apply the life cycle processes in ISO/IEC/IEEE 15288:2008 to achieve quality in the context of a specific product. It is... | |
| The SCSI protocol is designed to provide an efficient peer-to-peer I/O bus with the maximum number of hosts and peripherals determined by the bus width (8 or 16). Data may... | |
| There are differences between the views of regulatory bodies on the subject of genotoxicity testing. The purpose of this ISO/TR 10993-33: 2015 is to provide background information to facilitate the... | |
| This document is a guideline for the application of ISO/IEC/IEEE 15288:2015. It addresses system, life cycle, organizational, project, and process, concept application, principally through reference to ISO/IEC/IEEE 24748-1 and ISO/IEC/IEEE... | |
| This document supports the interest of information developers and associated roles responsible for producing information for users of software and systems developed within an agile environment. This document takes a... | |
| This document supports the needs of users for consistent, complete, accurate, and usable information. It provides requirements for strategy, planning, managing, staffing, translation, production, and quality and process-maturity assessment for... | |
| This Guide lays down methods of indicating conformity with standards and reference thereto in standards. Whilst it is directed specifically to conformity with standards, it is recognized that it may... | |
| This Technical Report provides a discussion of the parameters that have a bearing on the internal corrosion of solar water heating systems. The following topics are not dealt with: problems... | |
| Untitled DocumentFibre channel is a high speed serial interface using either optical or electrical connections and provides a general data transport vehicle for Upper Level Protocols (ULPs). This Technical Report... | |
| Untitled DocumentISO/IEC 14165-312:2009(E) is intended to serve as an implementation guide to maximize the likelihood of interoperability between conforming implementations. It requires features that are optional, and prohibits the use... | |
| Untitled DocumentThis Guide provides strategic principles, derived from market experience, for use by IEC and ISO technical committees and subcommittees working in the industrial automation sector, as well as other... | |
| Untitled DocumentThis Technical Report acts as an introduction to the concepts used to develop the MICE environmental classification system used in cabling standards developed by ISO/IEC. It also gives the... | |
| Untitled DocumentThis Technical Report specifies the transmission performance for channels to support 10GBASE-T. It also specifies the methods to assess whether Class E and Class F channels meet 10GBASE-T requirements. | |
| Users of bar code systems have experienced problems with poor read rates. These read rate problems can sometimes be attributed to spectral gloss from either the substrate or the image... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of communication is established in ISO/IEEE 11073-10421:2012 between personal telehealth peak expiratory flow monitor... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, a normative definition of the communication between personal basic electrocardiograph (ECG) devices and managers (e.g. cell phones,... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, ISO/IEEE 11073-10417:2017 establishes a normative definition of communication between personal telehealth glucose meter devices and compute engines... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, ISO/IEEE 11073-10420:2012 establishes a normative definition of the communication between personal body composition analyzing devices and managers... | |
| Within the context of the ISO/IEEE 11073 family of standards for device communication, ISO/IEEE 11073-10472:2012 establishes a normative definition of communication between personal telehealth medication monitor devices and compute engines... | |
| Within the context of the Sharable Content Object Reference Model (SCORM®), ISO/IEC TR 29163-2:2009 describes the components used in a learning experience, how to package those components for exchange from... | |
| Within the context of the Sharable Content Object Reference Model (SCORM®), ISO/IEC TR 29163-3:2009 describes the Learning Management System (LMS) requirements in managing the run-time environment (i.e., content launch process,... | |
| Within the context of the Sharable Content Object Reference Model (SCORM®), ISO/IEC TR 29163-4:2009 describes how SCORM® conformant content can be sequenced to the learner through a set of learner... | |
| Within the general scope described in ISO/IEC 9995‑1, ISO/IEC 9995-11:2015 defines the functionality of dead keys and repertoires of characters entered by dead keys (see Clause 5). ISO/IEC 9995-11:2015 is... | |
| Within the general scope described in ISO/IEC 9995-1, ISO 9995-9:2016 defines the allocation on a keyboard of a set of graphic characters which, when used in combination with an existing... |
| << Prev | Next >> |