Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
800
830
840
850
860
870
880
889
890
891
892
893
894
895
896
897
898
899
900
901
910
920
930
940
950
960
1000
1050
1100
1150
1200
1250
1500
1620
| Product Name | Notes |
|---|---|
| (R) Electromagnetic Compatibility - Component Test Procedure - Part 42 - Conducted Transient Emissions | |
| (R) NOMINAL REFERENCE WORKING PRESSURES FOR STEEL HYDRAULIC TUBING | |
| (R) Steel Stamped Nuts of One Pitch Thread Design - Metric Series, Standard | |
| 142 mm x 200 mm Sealed Beam Headlamp Unit | |
| A Recommended Method of Analytically Determining the Competence of Hydraulic Telescopic Cantilevered Crane Booms | |
| Acceptance Criteria for Special Unbonded Post-Tensioned Precast Structural Walls Based on Validation Testing and Commentary | |
| Agricultural Equipment Enclosure Pressurization System Test Procedure | |
| Agricultural Machinery - Guards for Moving Parts of Power Transmission - Guard Opening Without Tool | |
| Approved American National Standard for Photography Processing Chemicals Specifications for Anhydrous Sodium Formaldehyde Bisulfite | |
| Approved American National Standard for Photography Root Mean Square (rms) Granularity of Film (Images on One Side Only) Method for Measuring | |
| Architecture and requirements of digital rights management (DRM) for cable television multiscreen | |
| Architecture and specification for radio over IP transmission systems | |
| Audiovisual Systems - Slide Trays for Projectors - Circular Slide Tray | |
| AUTOMOTIVE AND OFF-HIGHWAY AIR BRAKE RESERVOIR PERFORMANCE AND IDENTIFICATION REQUIREMENTS | |
| Backup Lamp Switches | |
| Basic Principles for a Worldwide Common Family of Systems for the Provision of Interactive Television Services - Series J: Transmission of Television, Sound Programme and Other Multimedia Signals Interactive Services... | |
| Basic principles for a worldwide common family of systems for the provision of interactive television services | |
| Battery Cable | |
| BRAKE SYSTEM ROAD TEST CODE - MOTORCYCLES AND MOTOR-DRIVEN CYCLES | |
| Brake Test Procedure and Brake Performance Criteria for Agricultural Equipment | |
| Braking Performance - In-Service Crawler Tractors and Crawler Loaders | |
| Cantilevered Boom Crane Structures - Method Of Test | |
| Categories of Off-Highway Self-Propelled Work Machines | |
| Chemical Compositions of SAE Experimental Steels | |
| Child-friendly multidisciplinary and interagency response services for children who are victims of violence \x97 Requirements and recommendations | |
| Competence of standards professionals \x97 Part 1: In companies | |
| Competence of standards professionals \x97 Part 2: In standards-related organizations | |
| Component Nomenclature - Articulated Log Skidder, Rubber-Tired | |
| Component Nomenclature - Dumpers | |
| Component Nomenclature - Skidder-Grapple | |
| Component Nomenclature - Towing Winch | |
| Component Nomenclature-Industr ial Tractors (Wheel) | |
| Conducted Immunity, 250 kHZ to MHz, Direct Injection of Radio Frequency (RF) Power, Standard | |
| Constant Volume Sampler System for Exhaust Emissions Measurement, Information Report | |
| Control specification for IP-based switched digital video using data over cable service interface specifications | |
| Definitions for Machine Availability (Off-Road Work Machines), Recommended Practice | |
| DESCRIBING THE DRIVER'S FIELD OF VIEW | |
| Design Criteria - Driver Hand Controls Location for Passenger Cars, Multi-Purpose Passenger Vehicles, and Trucks (10 000 GVW and Under), Recommended Practice | |
| Design Guide for the Use of ASTM A1035/A1035M Grade 100 (690) Steel Bars for Structural Concrete | |
| Determination of Emissions from Gas Turbine Powered Light Duty Surface Vehicles | |
| DETERMINATION OF THE CURL OF PHOTOGRAPHIC FILM | |
| DIESEL ENGINE EMISSION MEASUREMENT PROCEDURE | |
| Digital rights management for video and audio content distribution \x96 Client | |
| Digital rights management for video and audio content distribution \x96 Requirements | |
| Digital rights management for video and audio content distribution \x96 System architecture | |
| Digital Video Broadcasting Interaction Channel Through the PSTN/ISDN - Series J: Transmission of Television, Sound Programme and Other Multimedia Signals - Interactive Systems for Digital Television Distribution | |
| Digital video broadcasting interaction channel through the PSTN/ISDN | |
| Dimensional Standard for Cylindrical Hydraulic Couplers for Agricultural Tractors | |
| Downloadable Conditional Access System for Bidirectional Network - Requirements | |
| Downloadable conditional access system for bidirectional networks \x96 System architecture | |
| Downloadable conditional access system for bidirectional networks \x96 The terminal | |
| Downloadable conditional access system for unidirectional networks \x96 Requirements | |
| Downloadable conditional access system for unidirectional networks \x96 System architecture | |
| Downloadable conditional access system for unidirectional networks \x96 Terminal system | |
| Earthmoving Machinery - Operator's Field of View | |
| Effective Acquisition Practices; A Committee Report of the AASHTO Subcommittee on Advanced Transportation Systems | |
| Electric Windshield Wiper Switch | |
| ELECTRICAL INTERFERENCE BY CONDUCTION AND COUPLING - CAPACITIVE AND INDUCTIVE COUPLING VIA LINES OTHER THAN SUPPLY LINES (STABILIZED TYPE) | |
| Electromagnetic Compatibility - Component Test Procedure - Part 42 - Conducted Transient Emissions, Standard | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to AC Power Line Electric Fields, Recommended Practice | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to Radiated Electromagnetic Fields, 10 kHz to 200 MHz, Strip Line Method, Recommended Practice | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Immunity to Radiated Electromagnetic Fields, 10kHz to 500 MHz - Tri-Plate Line Method, Recommended Practice | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 13: Immunity to Electrostatic Discharge | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 21: Immunity to Electromagnetic Fields, 10 kHz to 18 GHz, Absorber-Lined Chamber | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 22 - Immunity to Radiated Magnetic Fields from Power Lines, Recommended Practice | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle Components - Part 22: Immunity to Radiated Magnetic Fields from Power Lines | |
| Electromagnetic Compatibility Measurement Procedure for Vehicle ComponentsImmunity to Radiated Electromagnetic Fields, 10 KHz to 1000 MHzTri-Plate Line Method | |
| Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft) (60 Hz to 18 GHz), Standard | |
| Electromagnetic Compatibility Measurement Procedures and Limits for Vehicle Components (Except Aircraft) - Conducted Immunity, 30 Hz to 250 kHz - All Leads | |
| Electromagnetic Compatibility Measurements Procedure for Vehicle Components - Part 27 - Immunity to Radiated Electromagnetic Fields, Recommended Practice | |
| Electromagnetic Compatibility Measurements Procedure for Vehicle ComponentsPart 28 Immunity to Radiated Electromagnetic FieldsReverberation Method (Mode Tuning) | |
| Electromagnetic Susceptibility Test Procedures for Vehicle Components (Except Aircraft) | |
| Embedded common interface for exchangeable CA/DRM solutions: The advanced security system \x96 Key ladder block: Authentication of control word-usage rules information and associated data 1 | |
| Embedded common interface for exchangeable CA/DRM solutions: The advanced security system \x96 Key ladder block | |
| Embedded common interface for exchangeable CA/DRM solutions; Advanced Security \x96 ECI-specific functionalities | |
| Embedded common interface for exchangeable CA/DRM solutions; Architecture, definitions and overview | |
| Embedded common interface for exchangeable CA/DRM solutions; CA/DRM container, loader, interfaces, revocation | |
| Embedded common interface for exchangeable CA/DRM solutions; The virtual machine | |
| Embedded common interface for exchangeable CA/DRM solutions; Use cases and requirements | |
| Emergency preparedness | |
| Emprendimiento femenino \x97 Definiciones clave y criterios generales | |
| ENGINE COOLANT CONCENTRATE - ETHYLENE-GLYCOL TYPE | |
| Engine Sound Level Measurement Procedure | |
| Environmental management \x97 Life cycle assessment \x97 Data documentation format | |
| Ethics and integrity in sport \x97 Guidelines | |
| Exterior Sound Level Measurement Procedure for Self-Propelled Agricultural Field Equipment | |
| Exterior Sound Level Measurement Procedure for Small Engine Powered Equipment | |
| Factual subscriber-base reporting and protected content delivery in conditional access system \x96 Requirements | |
| Faecal sludge treatment units - Energy independent, prefabricated, community-scale resource-recovery units - Safety and performance | |
| For Photography - Processing Chemicals - Specifications for p-Aminophenol Hydrochloride | |
| for Photography Processing Chemicals Specifications for Anhydrous Citric Acid and Citric Acid Monohydrate | |
| for Photography Processing Chemicals Specifications for Sulfuric Acid | |
| FORCE-DEFLECTION MEASUREMENTS OF CUSHIONED COMPONENTS OF SEATS FOR OFF-ROAD WORK MACHINES | |
| Framework for integrated community-based life-long health and care services in aged societies | |
| Fuel Economy Measurement - Road Test Procedure | |
| Fuel Tank Filler Cap and Cap Retainer Threaded | |
| Fuel-Fired Heaters - Air Heating - for Construction and Industrial Machinery, Standard | |
| Functional requirements for IP-based digital video convergence service | |
| Functional requirements for IP-based switched digital video using data over cable service interface specifications | |
| Functional requirements specification for self-interference cancellation function of in-band full-duplex in a HFC based network | |
| Gap analysis for standardization on sustainable and human-centred societies enabled with cyber physical systems | |
| Glass types \x97 Crystal glass, crystal and lead crystal \x97 Specifications and test methods | |
| Global Media Identifier (GMI) for distribution channels and brands | |
| Glossary of Engine Cooling System Terms | |
| Glossary of Terms Related to Fluid Filters and Filter Testing | |
| Graphic technology - Color reflection target for input scanner calibration | |
| Graphic technology - Color transmission target for input scanner calibration | |
| Graphic technology - Prepress digital data exchange - Diecutting data (DDES3) | |
| Graphic technology \x96 Input data for characterization of 4-color process printing \x96 Expanded data set | |
| Graphic Technology-Input Data for Characterization of 4- Color Process Printing | |
| Guidance on water conservation techniques of circulating cooling water in thermal power plants | |
| Guidance principles for the sustainable management of secondary metals | |
| Guide pour la gestion du d\xe9veloppement durable dans les quartiers d'affaires | |
| Guidelines for contactless delivery services | |
| Guidelines for contributing to the United Nations Sustainable Development Goals (SDGs) | |
| Guidelines for Developing and Revising SAE Nomenclature and Definitions, Information Report | |
| Guidelines for evaluating cookstove performance | |
| Guidelines for live streaming marketing service | |
| Guidelines for quality management system documentation | |
| Guidelines for the management of drinking water utilities under crisis conditions | |
| Guidelines for virtual kitchen services | |
| Guidelines on the application of ISO 9001:2008 in policing organizations | |
| Guiding principles and framework for the sharing economy | |
| Hard-Drawn Mechanical Spring Wire and Springs | |
| Health informatics - Personal health device communication - Part 10422: Device specialization - Urine analyser | |
| Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep apnoea breathing therapy equipment (SABTE) TECHNICAL CORRIGENDUM 1 | |
| Health informatics - Personal health device communication - Part 10471: Device specialization - Independant living activity hub | |
| Health informatics - Personal health device communication Part 20601: Application profile - Optimized exchange protocol TECHNICAL CORRIGENDUM 1 | |
| Health informatics - Point-of-care medical device communication - Part 20702: Medical devices communication profile for web services | |
| Health informatics - Point-of-care medical device communication - Part 30300: Transport profile - Infrared wireless | |
| Health informatics \x97 Classification of traditional Chinese medicine data sets | |
| Health informatics \x97 Device interoperability \x97 Part 10206: Personal health device communication \x97 Abstract content information model | |
| Health informatics \x97 Device interoperability \x97 Part 10700: Point-of-care medical device communication \x97 Standard for base requirements for participants in a Service-oriented Device Connectivity (SDC) system | |
| Health informatics \x97 Device interoperability \x97 Part 10701: Point-of-care medical device communication \x97 Metric provisioning by participants in a Service-oriented Device Connectivity (SDC) system | |
| Health informatics \x97 Device interoperability \x97 Part 40101: Foundational \x97 Cybersecurity \x97 Processes for vulnerability assessment | |
| Health informatics \x97 Device interoperability \x97 Part 40102: Foundational \x97 Cybersecurity \x97 Capabilities for mitigation | |
| Health informatics \x97 Personal health device communication \x97 Part 10207: Domain information and service model for service-oriented point-of-care medical device communication | |
| Health informatics Point-of-care medical device communication Part 20101: Application profiles Base standard | |
| Helical Compression and Extension Spring Terminology | |
| Helical Springs: Specification Check Lists | |
| HEX BOLTS | |
| Hub Fatigue Test Procedures | |
| Hydraulic Excavator Lift Capacity Rating | |
| Hydraulic Valves for Motor Vehicle Brake Systems - Performance Requirements | |
| Hydraulic Valves for Motor Vehicle Brake Systems Test Procedure | |
| Hydraulic Wheel Cylinders for Automotive Drum Brakes | |
| HYPOTHETICAL REFERENCE CIRCUITS FOR SOUND-PROGRAMME TRANSMISSIONS | |
| Identification Terminology of Earthmoving Machines | |
| Illustrated User\x92s Guide - NBC 2010 Part 9 Housing and Small Buildings | |
| Image safety Reducing the incidence of undesirable biomedical effects caused by visual image sequences | |
| Imaging Materials - Arrhenius-Type Predictions - Test Method | |
| Imaging Materials - Life Expectancy of Information Stored in Recordable Compact Disc Systems - Method for Estimating, Based on Effects of Temperature and Relative Humidity | |
| Imaging Materials - Life Expectancy of Magneto-Optic (MO) Disks - Method for Estimating, Based on Effects of Temperature and Relative Humidity | |
| Imaging Materials - Optical Disc Media - Storage | |
| Imaging Materials - Photographic Film - Determination of Folding Endurance | |
| Imaging Materials - Polyester Base Magnetic Tape - Storage | |
| Imaging Materials - Processed Photographic Films - Methods for Determining Scratch Resistance | |
| Imaging Materials - Processed Photographic Plates - Storage Practices | |
| Imaging Materials - Reflection Prints - Storage Practices | |
| IMAGING MEDIA (FILM) - AMMONIA-PROCESSED DIAZO FILMS - SPECIFICATIONS FOR STABILITY | |
| IMAGING MEDIA (FILM) - LUBRICATION ON FILMS - METHOD FOR DETERMINING | |
| IMAGING MEDIA (FILM) - SILVER-GELATIN TYPE - SPECIFICATIONS FOR STABILITY | |
| Imaging Media (Film) - Thermally Processed Silver Microfilm - Specifications for Stability | |
| Imaging Media (Photographic Film and Papers) - Method for Determining the Resistance of Photographic Emulsions to Wet Abrasion | |
| Imaging Media (Photography) - The Effectiveness of Chemical Conversion of Silver Images Against Oxidation - Methods for Measuring | |
| Imaging Media - Determination of Brittleness of Photographic Film - Wedge Brittleness Test | |
| Imaging Media - Photographic Films and Papers - Methods for Determining Dimensional Change Characteristics | |
| IMAGING MEDIA - PHOTOGRAPHIC Films, PAPERS, AND PLATES - GLOSSARY OF TERMS PERTAINING TO STABILITY | |
| IMAGING MEDIA - PHOTOGRAPHIC PROCESSED FILMS, PLATES, AND PAPERS - FILING ENCLOSURES AND STORAGE CONTAINERS | |
| IMAGING MEDIA - PROCESSED SAFETY PHOTOGRAPHIC FILM - STORAGE | |
| Imaging Media - Stability of Color Photographic Images - Methods for Measuring | |
| Imaging Media Photographic Activity Test | |
| IMMUNITY TO CONDUCTED TRANSIENTS ON POWER LEADS (STABILIZED TYPE) | |
| Immunity to Radiated Electric Fields - Bulk Current Injection (BCI) Method, Recommended Practice | |
| Immunity to Radiated Electromagnetic Fields - Bulk Current Injection (BCI) Method | |
| Immunity to Radiated Electromagntic Fields; 10 kHz to 200 MHz - Crawford TEM Cell and 10 kHz to 5 GHz - Wideband TEM Cell | |
| Industrial Automation Systems - International Standardized Profile AMM11: MMS General Applications Base Profile - Part 1: Specification of ACSE, Presentation and Session Protocols for the Use by MMS | |
| Industrial Automation Systems - International Standardized Profile AMM11: MMS General Applications Base Profile - Part 2: Common MMS Requirements | |
| Industrial Automation Systems - International Standardized Profile AMM11: MMS General Applications Base Profile - Part 3: Specific MMS Requirements | |
| Industrial Ventilation Workbook | |
| Information and operations security and integrity requirements for lottery and gaming organizations | |
| Information Technology - International Standardized Profile FDI11 - Directory Data Definitions - Common Directory Use (Normal) | |
| Information Technology - International Standardized Profile FOD26 - Open Document Format: Enhanced Document Structure - Character, Raster Graphics and Geometric Graphics Content Architectures - Part 1: Document Application Profile (DAP)... | |
| Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 4: FDDI LAN Subnetwork-Dependent , Media-Dependent Requirements | |
| Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 6: Definition of Profile RA51.54, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and... | |
| Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 8: Definition of Profile RA51.1111, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and... | |
| Information Technology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 9: Definition of Profile RA51.1121, Relaying the Connectionless-Mode Network Service between CSMA/CD LAN Subnetworks and... | |
| Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 1: Subnetwork-Independe nt Requirements | |
| Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 2: LAN Subnetwork-Dependent , Media-Independent Requirements | |
| Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 3: CSMA/CD LAN Subnetwork-Dependent , Media-Dependent Requirements | |
| Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 4: PSDN Subnetwork-Dependent , Media-Dependent Requirements for Virtual Calls over a Permanent Access | |
| Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 5: Definition of Profile RC51.1111, X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls... | |
| Information Technology - International Standardized Profile RC - X.25 Protocol Relaying - Part 6: Definition of Profile RC51.1121, X.25 Protocol Relaying between CSMA/CD LAN Subnetworks and PSDNs Using Virtual Calls... | |
| Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 13: MAC Sublayer and Physical Layer Dependent Requirements for a Token Ring LAN... | |
| Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 2: TA51 Profile Including Subnetwork-Dependent Requirements for CSMA/CD Local Area Networks (LANs) | |
| Information Technology - International Standardized Profile TAnnnn - Connection-Mode Transport Service over Connectionless-Mode Network Service - Part 4: Definition of Profile TA53, Operation over a Token Ring LAN Subnetwork | |
| Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 3: ADI21 - DSA Performer Role First Edition | |
| Information Technology - International Standardized Profiles ADInn - OSI Directory - Part 4: ADI22 - DSA Invoker Role First Edition | |
| Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 1: Specification of ACSE, Presentation and Session Protocols for the Use by ROSE and CMISE | |
| Information Technology - International Standardized Profiles AOM1n OSI Management - Management Communications - Part 2: CMISE/ROSE for AOM12 - Enhanced Management Communications | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 10: FVT231 - Forms FEPCO (Field Entry Pilot Control... | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 11: FVT232 - Paged FEPCO (Field Entry Pilot Control... | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 13: FVT2111 - Waiting Time Control Object | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 14: FVT2112 - Printer Control Object | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 16: FVT2114 - Terminal Signal Titles Control Object | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 17: FVT2115 - Help Text Control Object | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 1: FVT211, FVT212 - Sequenced and Unsequenced Application Control... | |
| Information Technology - International Standardized Profiles FVT2nn - Virtual Terminal Basic Class - Register of Control Object Type Definitions - Part 3: FVT215, FVT216 - Application RIO Record Loading Control... | |
| Information technology - Ubiquitous green community control network - Part 1: Control and management | |
| Information technology - Ubiquitous green community control network - Part 3: Security | |
| Information Technology Systems Installation Methods Manual (ITSIMM) | |
| Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 3: CSMA/CD LAN Subnetwork-Dependent , Media-Dependent Requirements | |
| Information Techonology - International Standardized Profile RA - Relaying the Connectionless-Mode Network Service - Part 5: Definition of Profile RA51.51, Relaying the Connectionless-Mode Network Service Between CSMA/CD LAN Subnetworks | |
| Informatique de la sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10424: Sp\xe9cialisation de dispositif - \xc9quipement de th\xe9rapie respiratoire de l'apn\xe9e du sommeil (SABTE) | |
| Informatique de la sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10425: Sp\xe9cialisation du dispositif - Glucom\xe8tre continu (CGM) | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10404: Sp\xe9cialisation des dispositifs - Oxym\xe8tre de pouls | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10406: Sp\xe9cialisation des dispositifs - \xc9lectrocardiograp he de base (ECG) (ECG 1 \xe0 3) | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10407: Sp\xe9cialisation des dispositifs \x97 Moniteur de pression sanguine | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10408: Sp\xe9cialisation des dispositifs - Thermom\xe8tre | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10415: Sp\xe9cialisation des dispositifs - Plateau de balance | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10417: Sp\xe9cialisation des dispositifs - Glucom\xe8tre | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10418: Sp\xe9cialisation des dispositifs - Surveillance du rapport normalis\xe9 international (INR) | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10419: Sp\xe9cialisation du dispositif - Pompe \xe0 insuline | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10420: Sp\xe9cialisation de dispositif - Analyseur de composition corporelle | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10421: Sp\xe9cialisation des dispositifs - Moniteur de surveillance du d\xe9bit expiratoire de pointe (d\xe9bit de pointe) | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10427: Sp\xe9cialisation des dispositifs - Moniteur de l'\xe9tat de puissance des dispositifs de sant\xe9 personnels | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10441: Sp\xe9cialisation des dispositifs - Moniteur d'activit\xe9 et de forme cardiovasculaire | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10442 : Sp\xe9cialisation des dispositifs - \xc9quipement de mise en forme musculaire | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 10472: Sp\xe9cialisation des dispositifs - Moniteur de surveillance de m\xe9dication | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels - Partie 20601: Profil d'application - Protocole d'\xe9change optimis\xe9 | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels Partie 10418 : Sp\xe9cialisation des dispositifs - Surveillance du rapport normalis\xe9 international (INR) CORRECTIF TECHNIQUE 1 | |
| Informatique de sant\xe9 - Communication entre dispositifs de sant\xe9 personnels Partie 20601: Application profile - Optimized exchange protocol AMENDEMENT 1 | |
| Informatique de sant\xe9 - Communication entre dispositifs m\xe9dicaux sur le site des soins - Partie 10103: Nomenclature - Dispositif implantable, cardiaque | |
| Informatique de sant\xe9 - Communication entre dispositifs m\xe9dicaux sur le site des soins - Partie 30200 : Profil de transport - Connexion par c\xe2ble | |
| Informatique de sant\xe9 - Communication entre dispositifs m\xe9dicaux sur le site des soins - Partie 30200: Profil de transport - Connexion par c\xe2ble | |
| Informatique de sant\xe9 - Communication entre dispositifs m\xe9dicaux sur le site des soins - Partie 30400: Profil d'interface - Ethernet c\xe2bl\xe9 | |
| Informatique de sant\xe9 \x97 Interop\xe9rabilit\x e9 des dispositifs \x97 Partie 10201: Communication entre dispositifs m\xe9dicaux sur le site des soins \x97 Mod\xe8le d'informations du domaine | |
| Informatique de sant\xe9 \x97 Interop\xe9rabilit\x e9 des dispositifs \x97 Partie 20701: Communication entre dispositifs m\xe9dicaux sur le site des soins \x97 Architecture d'\xe9change orient\xe9e services entre dispositifs m\xe9dicaux et liaison... | |
| Innovative Transportation Financing; A Report on the Results of a National Survey by the American Association of State Highway and Transportation Officials | |
| INSTRUMENTATION AND TECHNIQUES FOR VEHICLE REFUELING EMISSIONS MEASUREMENT | |
| Intelligent transport systems (ITS) \x97 Communications \x97 ITS communication role and functional model | |
| Intelligent transport systems \x97 Framework architecture for plug and play (PnP) functionality in vehicles utilizing nomadic devices | |
| Intelligent transport systems \x97 Secure interfaces governance \x97 Minimum requirements and governance procedures | |
| Interface specifications for IP-based switched digital video using DOCSIS | |
| International harmonized method(s) for a coherent quantification of CO2e emissions of freight transport | |
| Interoperability of microfluidic devices - Guidelines for pitch spacing dimensions and initial device classification | |
| Introduction to Iron Casting Thermal Treatments | |
| ISO/TS 16949 Quality Manual & Procedures Pkg | |
| iSpec 2200 Extract: ATA Standard Numbering System | |
| ISUZU METALS RENEWAL | |
| Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Information Report | |
| Laboratory Testing Machines for Measuring the Steady State Force and Moment Properties of Passenger Car Tires, Recommended Practice | |
| LAG SCREWS | |
| Latticed Crane Boom Systems - Analytical Procedure | |
| Leaf Springs for Motor Vehicle Suspension-Metric Bar Sizes | |
| Life Expectancy of Compact Discs (CD-Rom) - Method for Estimating, Based on Effects of Temperature and Relative Humidity | |
| Lighting and Marking of Construction and Industrial Machinery, Recommended Practice | |
| Limits and Methods of Measurement of Radio Disturbance Characteristics of Components and Modules for the Protection of Receivers Used on Board Vehicles | |
| Low Tension Primary Cable | |
| Management systems for United Nations Sustainable Development Goals (SDGs) \x97 Requirements | |
| Marco para la implementaci\xf3n de principios ambientales, sociales y de gobernanza (ESG) | |
| Materials and Quality Considerations for High-Strength Concrete in Moderate to High Seismic Applications | |
| Maximum Sound Level for Passenger Cars and Light Trucks | |
| MEASUREMENT METHODS AND TEST PROCEDURES FOR TELETEXT SIGNALS | |
| Measurement of Exterior Sound Level of Trucks with Auxiliary Equipment | |
| Measurement of Exterior Sound Levels for Heavy Trucks Under Stationary Conditions | |
| Measurement of Whole Body Vibration of the Seated Operator of Off-Highway Work Machines | |
| Measurement Procedure for Determining a Representative Sound Level at a Construction Site Boundary Location | |
| Mechanical and Material Requirements for Metric Wheel Bolts | |
| Mechanical and Material Requirements for Wheel Bolts | |
| Medical devices \x97 Guidance on the application of ISO 14971 | |
| Medical electrical equipment - Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph | |
| Medical electrical equipment \x97 Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph | |
| Medical laboratories \x97 Practical guidance for the estimation of measurement uncertainty | |
| Method of Measuring and Reporting the Pressure Differential-Flow Characteristics of a Hydraulic Fluid Power Valve | |
| Minimum Performance Criteria for Braking Systems for Rubber Tired Cranes and Excavator | |
| Minimum Performance Criteria for Braking Systems for Self-Propelled, Smooth Steel Wheel, Pneumatic Tired or Multiple Projection Steel Wheel Rollers and Compactors | |
| Mobile Crane Working Area Definitions, Recommended Practice | |
| Motor Vehicle Driver and Passenger Head Position | |
| Multiple resource evaluation guideline | |
| Nanotechnologies \x97 \xc9valuation des risques associ\xe9s aux nanomat\xe9riaux | |
| Net zero guidelines | |
| Network Independent Protocols for Interactive Systems - Series J: Transmission of Television, Sound Programme and Other Multimedia Signals - Interactive Systems for Digital Television Distribution | |
| Network independent protocols for interactive systems | |
| Nomenclature - Rollers/ Compactors, Standard; | |
| Numbering Metals and Alloys | |
| Oil Change System for Quick Service of Off-Road Self-Propelled Work Machines, Recommended Practice | |
| One-Way Clutches-Nomenclatur e and Terminology | |
| Operator Cab Environment for Heated, Ventilated, and Air Conditioned Construction and Industrial Equipment | |
| Operator Controls and Displays on Motorcycles | |
| Operator Controls for Graders, Standard; | |
| Operator Protection for Industrial Equipment | |
| Operator Protective Structure Performance Criteria For Certain Forestry Equipment | |
| Organisation professionnelle agricole \x97 Lignes directrices | |
| Overcenter Clutch Spin Test Procedure | |
| Packaging for terminally sterilized medical devices \x97 Guidance on the application of ISO 11607-1 and ISO 11607-2 | |
| Pairing protocol specification for renewable conditional access system | |
| Passenger Car Dimension Definitions | |
| Performance Criteria for FOPS on General Purpose Industrial Machines | |
| Performance Criteria for Rollover Protective Structures (ROPS) for Earthmoving, Construction, Logging, and Industrial Vehicles | |
| PERFORMANCE OF INDIRECT-FIRED WATER HEATERS - TESTING STANDARD | |
| PERFORMANCE REQUIREMENTS FOR SAE J844D NONMETALLIC TUBING AND FITTING ASSEMBLIES USED IN AUTOMOTIVE AIR BRAKE SYSTEMS | |
| Performance Test for Air Conditioned Agricultural Equipment | |
| Performance, Test & Application Criteria of Electrically Operated Forward Warning Horn for Mobile Construction Machinery | |
| Permanence and durability of commercial prints \x97 Part 21: In-window display \x97 Light and ozone stability | |
| Petroleum and natural gas industries \x97 Site-specific assessment of mobile offshore units \x97 Part 2: Jack-ups commentary and detailed sample calculation | |
| Photography (Chemicals) - 5-Methylbenzotriazol e | |
| Photography (Chemicals) - 5-Nitrobenzimidazole Nitrate | |
| Photography (Chemicals) - Aluminum Sulfate Solution | |
| Photography (Chemicals) - Ethylene- diaminetetraacetic Acid (EDTA), ((Ethylenedinitrilo) Tetraacetic Acid), and Its Salts | |
| Photography (Chemicals) - Ethylenediamine | |
| Photography (Chemicals) - Ferric Ammonium Ethylenediamine- tetraacetate Solution and Sodium Ferric Ethylenediamine- Tetraacetate Trihydrate | |
| Photography (Chemicals) - Hydroxylamine Sulfate | |
| Photography (Chemicals) - Potassium Persulfate | |
| Photography (Chemicals) - Sodium Sulfate, Anhydrous | |
| Photography (Chemicals) - Sodium Thiocyanate Crystals and Solution (50%) | |
| Photography (Chemicals) \x96 Sodium Tetraborate, Pentahydrate and Decahydrate | |
| Photography (Chemicals) Sodium Metaborate Octahydrate | |
| Photography (Chemicals)- Trisodium Phosphate, Dodecahydrate | |
| Photography (Imaging Materials) - 135-Size Film Canister Bottoms - Composition | |
| Photography (Imaging Materials) - 135-Size Film Canister Lids - Composition | |
| Photography (Photofinishing) - Identification of Customer Order Components for Automatic Matching in a Centralized Photofinishing Plant | |
| Photography (Processing) - Channel-Type Hangers for Processing Sheet Films and Plates - Specifications | |
| Photography (Processing) - Determination of Silver | |
| Photography (Processing) - Developers for Black-and-White Films and Plates - Method for Graininess Evaluation | |
| Photography (Processing) - Effluents - Determination of Biochemical Oxygen Demand (BOD) and Dissolved Oxygen (DO) | |
| Photography (Processing) - Effluents - Determination of Chlorine | |
| Photography (Processing) - Effluents - Determination of Free Cyanide | |
| Photography (Processing) - Effluents - Determination of Total Cyanide | |
| Photography (Processing) - Effluents - Identification and Analytical Methods | |
| Photography (Processing) - Photographic Inertness of Construction Materials - Test Method and Specification | |
| Photography (Processing) - Photographic Processing Solutions - pH Calibration and Measurements - Test Methods | |
| Photography (Processing) - Pressure-Sensitive Adhesive Systems for Use in Mounting Photographs - Specifications | |
| Photography (Processing) - Processing Trays and Tanks - Specifications | |
| Photography (Processing) - Roll and Dental Films - Requirements for Film Clips and Hangers | |
| Photography (Sensitometry) - Black-and- White Aerial Camera Films - Determination of IS0 Speed and Average Gradient | |
| Photography - Black-and-White Pictorial Still Camera Negative Film/Process Systems - Determination of ISO Speed | |
| Photography - Colour Reversal Camera Films - Determination of ISO Speed | |
| Photography - Determination of Residual Thiosulfate and Other Related Chemicals in Processed Photographic Materials - Methods Using Iodine- Amylose, Methylene Blue and Silver Sulfide | |
| Photography - Electronic Still Picture Imaging - Reference Input Medium Metric RGB Color Encoding: RIMM-RGB | |
| Photography - Electronic Still Picture Imaging - Reference Output Medium Metric RGB Color Encoding: ROMM-RGB | |
| Photography - Industrial Radiographic Film - Determination of ISO Speed and Average Gradient When Exposed to X- and y-Radiation | |
| Photography - Intra-Oral Dental Photographic Film - Specification | |
| Photography - Materials for Direct-Positive Colour Print Cameras - Determination of ISO Speed | |
| Photography - Photographic Films - Specifications for Safety Film | |
| Photography - Photographic Materials - Determination of Safelight Conditions | |
| Photography - Photographic-Grade Chemicals - Test Methods | |
| Photography - PrePackaged Chemicals for the Processing of Silver-Halide-Based Photographic Materials - Vocabulary | |
| Photography - Print Grain Index - Assessment of Print Graininess from Color Negative Film | |
| PHOTOGRAPHY - PROCESSED VESICULAR PHOTOGRAPHIC FILM - SPECIFICATIONS FOR STABILITY | |
| Photography - Processing Chemicals - Specifications for Formaldehyde 37% Solution with Stabilizer | |
| Photography - Processing Chemicals - Specifications for Sodium Ferrocyanide Decahydrate | |
| Photography - Sensitometry of Screen/Film Systems for Medical Radiography - Part 1: Determination of Sensitometric Curve Shape, Speed and Average Gradient | |
| Photography - Thermally Activated Adhesive Dry-Mounting Systems for Mounting Photographs - Specifications | |
| Photography \x96 Black-and-White, Continuous-Tone Films \x96 Photographic Modulation Transfer Function | |
| Photography Digital Still Cameras JPEG 2000 DSC Profile | |
| Photography Processing Chemicals Specifications for Hydrochloric Acid | |
| Practitioner\x92s Guide for Alternative Cements | |
| Preparation of information for use (instructions for use) of products \x97 Part 2: Assembly of self-assembly products | |
| Preparation of steel substrates before application of paints and related products \x97 Analytical colorimetry method to support visual assessment of surface preparation grades | |
| Procedure for Measuring Bore and Face Runout of Flywheels, Flywheel Housings and Flywheel Housing Adapters | |
| Quality Management Systems - Guidelines for Process Improvements in Health Service Organizations | |
| Quality management systems Guidelines for the application of ISO 9001:2000 in education | |
| Quality management systems Guidelines for the application of ISO 9001:2000 in local government | |
| Quality of learning environments for students in healthcare professions \x97 Requirements for healthcare education providers in care settings | |
| Quality Systems - Automotive Suppliers - Particular Requirements for the Application of ISO 9001:1994 | |
| Recommendations for Children\xb4s Snowmobile | |
| Recommendations for the Management, Operation, Testing, and Maintenance of HVAC Systems | |
| RECREATIONAL TRAILER VEHICLE IDENTIFICATION NUMBER SYSTEM | |
| Report on Alternative Cements | |
| Report on Bridge Decks Free of Steel Reinforcement | |
| Report on Design of Concrete Wind Turbine Towers | |
| Report on Performance-Based Requirements for Concrete | |
| Report on Structural Design and Detailing for High-Strength Concrete in Moderate to High Seismic Applications | |
| Repr\xe9sentation et \xe9change des donn\xe9es relatives aux outils coupants \x97 Partie 315: Cr\xe9ation et \xe9changes de mod\xe8les 3D \x97 Outils d'actionnement \xe0 machine | |
| Requirement for in-band full-duplex in a HFC based network | |
| Requirement for radio over IP transmission system | |
| Requirement of channel switching service over hybrid fibre and coaxial based network | |
| Requirements and recommendations for the construction of emergency medical facilities | |
| Requirements for the advanced IP-based digital video convergence service | |
| Rheological test methods \x97 Fundamentals and interlaboratory comparisons \x97 Part 1: Determination of the yield point | |
| Risk Analysis and Management for Critical Assets Protection (RAMCAP) Standard for Risk and Resilience Management of Water and Wastewater Systems | |
| Risk and Resilience Management of Water and Wastewater Systems | |
| Risk management - Guidance for the implementation of ISO 31000 | |
| Risk management \x97 Guidelines on using ISO 31000 in management systems | |
| Road Vehicles - Cybersecurity Engineering | |
| Road Vehicles - Electrical Disturbances by Narrowband Radiated Electromagnetic Energy - Component Test Methods Part 21 - Absorber-Lined Chamber, Information Report | |
| Road vehicles \x97 Liquefied natural gas (LNG) integrated low pressure refuelling and venting connector \x97 1,8 MPa connector | |
| Road vehicles \x97 On-board diagnostic communication \x97 Part 3: Zero emissions vehicle propulsion systems on UDS (ZEVonUDS) | |
| SAE Nodal Mount | |
| Safe Design and Operation of Process Vents and Emission Control Systems | |
| Safety for Industrial Flail Mowers | |
| Safety, security and sustainability of cannabis facilities and operations \x97 Part 1: Requirements for the safety of cannabis buildings, equipment and oil extraction operations | |
| Safety, security and sustainability of cannabis facilities and operations \x97 Part 2: Requirements for the secure handling of cannabis and cannabis products | |
| Safety, security and sustainability of cannabis facilities and operations \x97 Part 3: Good production practices (GPP) | |
| School Bus Stop Arm | |
| Screening of genetically modified organisms (GMOs) in cotton and textiles | |
| Seals - Evaluation of Elastohydrodynamic | |
| Seals - Terminology of Radial Lip | |
| SEALS - TESTING OF RADIAL LIP | |
| SEAT BELT HARDWARE WEBBING ABRASION TEST REQUIREMENTS | |
| Section J - Table of Contents - Pins, Plugs, Retaining Rings | |
| SERVICE BRAKE SYSTEM PERFORMANCE REQUIREMENTS - MOTORCYCLES AND MOTOR-DRIVEN CYCLES | |
| Service model and architecture of downloadable mobile multi-CA/DRM solutions for delivering CA/DRM client software to secondary devices | |
| Service Performance Requirements and Test Procedures for Motor Vehicle lamp Bulbs | |
| SERVICE PERFORMANCE REQUIREMENTS FOR TURN SIGNAL FLASHER | |
| SERVICE PERFORMANCE REQUIREMENTS FOR VEHICULAR HAZARD WARNING FLASHERS | |
| SERVICE PERFORMANCE REQUIREMENTS FOR WARNING LAMP ALTERNATING FLASHERS | |
| SEVEN CONDUCTOR CABLE - TRUCK AND BUS | |
| Sheet Steel Thickness and Profile | |
| Sintered Tool Materials, Recommended Practice | |
| Size Classification for Crawler Tractor | |
| SNOWMOBILE PASSENGER HANDGRIPS | |
| Specification and method for the determination of performance of automated liquid handling systems | |
| Specification Definitions - Articulated, Rubber- Tired Log Skidder | |
| Specification Definitions-Skidder- Grapple | |
| Specification for High-Strength Concrete in Moderate to High Seismic Applications | |
| Specification for Photographic Grade Benzyl Alcohol C6H5CH2OH | |
| Specification for Photographic Grade Potassium Iodide | |
| Specification for Photographic Grade Sodium Bromide | |
| Specification for Tolerances for Precast Concrete | |
| Specification of IP-VoD DRM for cable television multiscreen system in multi-DRM environment | |
| Specifications of authorization centre interfaces for renewable conditional access system | |
| Specifications of network protocol for renewable conditional access system | |
| Speedometer Test Procedure | |
| Spherical Rod Ends | |
| Spring-Loaded Clutch Spin Test Procedure | |
| SQUARE AND HEX NUTS | |
| SQUARE HEAD SETSCREWS | |
| STEEL PRODUCTS FOR ROLLOVER PROTECTIVE STRUCTURES (ROPS) AND FALLING OBJECT PROTECTIVE STRUCTURES (FOPS) (STABILIZED TYPE) | |
| STEEL STAMPED NUTS OF ONE PITCH THREAD DESIGN | |
| Sterilization of health care products \x97 Radiation \x97 Part 4: Guidance on process control | |
| Subjective Rating Scale for Evaluation of Noise and Ride Comfort Characteristics Related to Motor Vehicle Tires | |
| Supplemental Information-Driver Hand Controls Location for Passenger Cars, Multi-Purpose Passenger Vehicles, and Trucks (10000 GVW and Under) | |
| SURFACE DISCONTINUITIES ON GENERAL APPLICATION BOLTS, SCREWS, AND STUDS | |
| Sustainable critical mineral supply chains | |
| Symbols for Motor Vehicle Controls, Indicators and Tell-Tales | |
| Syst\xe8mes d\x92assainissement non collectifs - Exigences de performance et de s\xe9curit\xe9 g\xe9n\xe9rale pour la conception et les essais | |
| Tableware, giftware, jewellery, luminaries \x97 Glass clarity \x97 Classification and test method | |
| Taxonomy and definitions for terms related to driving automation systems for on-road motor vehicles | |
| Technical guidelines for the development of small hydropower plants \x97 Part 1: Vocabulary | |
| Technical guidelines for the development of small hydropower plants \x97 Part 2: Site selection planning | |
| Technical guidelines for the development of small hydropower plants \x97 Part 3: Design principles and requirements | |
| TECHNICAL PUBLICATION FOR AGRICULTURAL EQUIPMENT | |
| Technical Report on Fatigue Properties, Information Report | |
| Terms, Definitions and Acronyms Applicable to the Transmission of Television and Sound-Programme Signals and of Related Data Signals Series J: Transmission of Television, Sound Programme and Other Multimedia Signals General... | |
| Test Procedure for Parking Stability of Motorcycles | |
| Test Procedure for the Measurement of Exhaust Emissions from Small Utility Engines | |
| Test Procedures for Electric Vehicles to Determine Charging Performance | |
| TEST PROCEDURES FOR MEASURING TRUCK TIRE REVOLUTIONS PER KILOMETER/MILE (STABILIZED TYPE) | |
| TESTING DYNAMIC PROPERTIES OF ELASTOMERIC ISOLATORS (STABILIZED TYPE) | |
| Tests and Procedures for High-Temperature Transmission Oil Hose, Lubricating Oil Hose and Hose Assemblies | |
| The IAQ and HVAC Workbook | |
| The Integrated Use of Management System Standards | |
| TOLERANCES FOR TRANSMISSION TIME DIFFERENCES BETWEEN THE VISION AND SOUND COMPONENTS OF A TELEVISION SIGNAL | |
| Ton Mile Per Hour Application Practice | |
| Ton-Mile Per Hour Test Procedure | |
| Traditional Chinese medicine \x97 Test method for moxa floss quality \x97 Concentration of waste particles | |
| Transmission specification for IP-based switched digital video using data over cable service interface specifications | |
| Transmission specification for radio over IP transmission systems | |
| Transmission Systems for Interactive Cable Television Services - Series J: Transmission of Television, Sound Programme and Other Multimedia Signals - Interactive Systems for Digital Television Distribution | |
| Transmission Systems for Interactive Cable Television Services Annex A: Digital Video Broadcasting: DVB Interaction Channel for Cable TV (CATV) Distribution Systems Series J: Transmission of Television, Sound Programme and Other... | |
| Transmission systems for interactive cable television services Annex A: Digital Video Broadcasting: DVB interaction channel for Cable TV (CATV) distribution systems | |
| Transmission Systems for Interactive Cable Television Services Annex B: Data-over-cable service interface specifications: Radio-frequency interface specification Series J: Cable Networks and Transmission of Television, Sound Programme and Other Multimedia Signals... | |
| Transmission systems for interactive cable television services Annex B: Data-over-cable service interface specifications: Radio-frequency interface specification | |
| Transmission systems for interactive cable television services Annex C: Data-over-cable service interface specifications: Radio-frequency interface specification using QAM technique SERIES J: CABLE NETWORKS AND TRANSMISSION OF TELEVISION, SOUND PROGRAMME AND... | |
| Transmission systems for interactive cable television services Annex C: Data-over-cable service interface specifications: Radio-frequency interface specification using QAM technique | |
| Transmission systems for interactive cable television services | |
| Truck and Truck Tractor Vehicle Identification Number Systems | |
| Tubing - Motor Vehicle Brake System Hydraulic | |
| Turbocharger Connections | |
| Unauthorized Starting or Movement of Machines, Recommended Practice | |
| Understanding and applying drip irrigation for sustainable agriculture | |
| Useful Equations - Practical Applications of OH&S Math | |
| Useful Equations: Practical Applications of OH&S Math | |
| Using ISO 26000:2010 in management systems | |
| Vehicle security barriers - Part 1: Performance requirement, vehicle impact test method and performance rating | |
| Vehicle security barriers - Part 2: Application | |
| Verification of Pendulum Impact Testing Machines for Testing Steels | |
| Warning Lamp Alternating Flashers | |
| WINDSHIELD WASHER TUBING (STABILIZED TYPE) | |
| World Manufacturer Identifier, Recommended Practice |
| << Prev | Next >> |