Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
780
790
800
810
820
830
837
838
839
840
841
842
843
844
845
846
847
848
849
850
860
870
880
890
900
950
1000
1050
1100
1150
1200
1500
1620
| Product Name | Notes |
|---|---|
| Abrasion Resistance of Organic Coatings (Taber Abraser Method) | |
| Absorptivity of Hydrocarbons on Fluorinated Plastic Surfaces | |
| Accelerated Aging and Steaming | |
| Accelerated Corrosion Test Scheduled for Deletion by January 2000. Do Not Use on New Applications. | |
| Accelerated Corrosion Test | |
| Adhesion Guidelines from Bonding Exterior Sheet Molding Compound (SMC) for After Market Service Use | |
| Adhesion of Fiber Coating | |
| Adhesion Performance of Decorative Exterior Emblems and Script | |
| Adhesion-Creep Characteristics of Adhesives on Sponge Rubber | |
| Aging Test for Vinyl Compounds and/or Parts | |
| Aluminum Coated Stainless Steel Sheet Metal | |
| Aluminum Metal Matrix Composite Tubing | |
| Aluminum Sheet for Body and Closure Panel Applications | |
| Applied Graphics on Plastic Parts | |
| Ash Content of Plastic Materials | |
| Assembly Plant Light Bulbs Recommended Handling/Installatio n Practices | |
| Automotive (Metallic) Panel Bonding Performances Guidelines For After Market Service Use | |
| Automotive Component EMC Specification Overview of Test Requirements | |
| Automotive Environmental Cycle Tests for Electrical Components | |
| Automotive Environmental Cycles | |
| Automotive Resistance Projection Welded Steel Fasteners and Drawn ARC Studs | |
| Auxiliary Floor Mats | |
| Bake off Loss of Solids of Cathodic ELPO | |
| Bimetal Strip Stainless Steel Clad on Aluminum | |
| Binder Content of Fiberglass Substrates | |
| Black Anodized Aluminum Bar Coded Plates | |
| Bond Strength of Metallized Mylar Strings, Belts and Moldings | |
| BREAKING STRENGTH OF NARROW TEXTILE MATERIALS | |
| Car Wash Simulation Test | |
| Casting Buyer's Guide | |
| Centrifugal Casting | |
| Chemical Stress Resistance of Plastics | |
| Chemically Bonded Cores and Molds | |
| CHIP RESISTANCE OF COATINGS | |
| Chromate-Zinc Dust Complex/Zinc-Rich Preprimed Galvanized Steel Sheet | |
| Circular Vacuum Test Procedure - Laminated Fabrics | |
| Clean PVC Sheet for Backlight | |
| Cleanability of Convertible Top and Roof Trim Materials | |
| Coating - Decorative, for Use under Poured Urethane Lens | |
| Coating Adhesion of Vinyl Coated Materials | |
| Coefficients of Friction of Soft Trim Material | |
| Coextruded Multi-Layer Plastic Fuel Tank | |
| Cold Rolled and Hot Rolled Steel for Through Hardening Applications | |
| Color Changes Due to Temperature or Humidity | |
| Color Identification of Metric Parts | |
| Color Transfer of Sewing Thread | |
| Colorfastness to Crocking (Rubbing) | |
| Compatibility of Lubricating Grease with Elastomers by Immersion | |
| Compatibility of Vinyl Materials and Leather | |
| Composite Heat Shield Material | |
| Conducted Transient Emissions EMC - Component Test Procedure | |
| Conductivity Test of Coated Plastic Parts | |
| Coolant Hose | |
| CORROSION - CHASSIS, POWERTRAIN AND HVAC | |
| CORROSION - FLOOR/REAR COMPARTMENT PAN/REAR RAILS | |
| CORROSION - FRONT END STRUCTURE AND DASH PANEL | |
| CORROSION - HOODS | |
| CORROSION - PILLARS | |
| CORROSION - RADIATOR SUPPORTS | |
| CORROSION - REAR END PANELS | |
| CORROSION - ROOF PANEL | |
| CORROSION - SHOCK TOWERS/FRONT WHEELHOUSES | |
| CORROSION - SPLASH PROTECTION | |
| CORROSION - UPPER AND LOWER LONGITUDINAL ENGINE RAILS | |
| CORROSION AVOIDANCE - GENERAL GUIDELINE | |
| CORROSION AVOIDANCE - GENERAL GUIDELINES | |
| Corrosion Creepback Test Method | |
| CORROSION DECKLIDS, HATCHLIDS AND TAILGATES | |
| Corrosion Protective Coatings - Zinc Alloy Plating | |
| Corrosion Protective Coatings Phosphate/Black Zinc Organic Type | |
| Corrosion Protective Coatings Phosphate/Zinc/Organ ic Type | |
| Corrosion Protective Coatings Zinc/Organic Type | |
| Corrosion Test for Seal Compounds | |
| Corrosion Test for Sheet Metal Forming Lubricants | |
| Crater Resistance Test for Sheet Metal Forming Lubricants | |
| Craze Resistance of Interior Vinyl Extruded Moldings | |
| Crazing of Vinyl Trim Materials | |
| Cure Rate of Adhesives for Bonding Stationary Glass by Tensile Adhesion Test | |
| Cycle Life of Hook and Loop Tapes | |
| Cyclic Chipping Test | |
| Decal Application Instructions | |
| Decorative Interior Plastic Laminates | |
| Decorative Metal Coating - Metallic Nitride Vapor Deposition over Chrome Plate | |
| Decorative Precious Metal Plated Ornamentation | |
| Determination of Crease Resistance | |
| Determination of Fogging Characteristics of Automotive Interior Trim Materials | |
| Determination of Lead in Non-Leaded Gasoline | |
| Determination of Manganese in Gasoline | |
| Determination of Percent Nodularity of Nodular Iron | |
| Determining Paint Thickness of Painted Flexible Plastic Parts | |
| Determining the Recoverable Energy of Flexible SMC Materials | |
| Developmental Tests for Low Level Switching | |
| Dexron - III Automatic Transmission Fluid | |
| Dexron-III Automatic Transmission Fluid Specification | |
| Die Quenched Low Carbon Martensite Alloy Steel | |
| Dielectric Compression Bond of Polyurethane Foam | |
| Dielectric Embossing of Body Cloth | |
| Dielectric Embossing of Carpet | |
| Dielectric Embossing of Padding | |
| Dielectric Embossing of Vinyl | |
| Dielectric Sealing Properties of Roof Trim and Convertible Top Materials | |
| Diesel Fuel Factory Fill, Grade No. 2 | |
| Dime Scrape Test to Determine Paint Adhesion and Brittleness | |
| Dimensional Stability of a Headlining Assembly | |
| Dimensional Stability of Convertible Top and Roof Trim Materials | |
| Dimensional Stability of Sheepskin | |
| Door Glass Run Channels & Belt Strips | |
| Double Vision Inspection Procedure for Windshields | |
| Drapeability of Sound Absorber Material | |
| Draw Bead Simulator Testing | |
| Durability Requirements for Stainless Steel Decorative Parts | |
| Dust-Out from Fiber Sound Absorber Pad | |
| EC Test Electrolytic Corrosion Test for Evaluating the Corrosion Protection Characteristics of Copper - Nickel - Chromium Electrodeposits | |
| Edge Coverage Test for Cathodic ELPO | |
| Effect of Sheet Metal Forming Lubricants on the Phosphate System | |
| Elastomeric Fabric | |
| Electrochemical Test for Evaluating Ethylene Glycol Engine Coolants for Corrosion Inhibition at Aluminum Heat-Rejecting Surfaces | |
| Electronic Module (Interior Mounted, Unexposed) Validation Test Standard | |
| Electrostatic Discharge Sensitivity Classification for Packaging and Handling EMC - Component Test Procedure | |
| Engine Coolant Hose Coupled Assemblies and Quick- Connector Assemblies | |
| Engine Oil Filterability Test (EOFT) | |
| Engine Oil Pan Gaskets | |
| Evaluating Brittleness of Painted Plastics and Sealants by Means of a Mandrel | |
| Evaluation of Leather Dye Stain Resistance and Cleanability | |
| Evaporation Characteristics of Lubricants | |
| Extensibility and Warp of Vacuum Forming Material (Vacuum Forming DOT Test) | |
| Extensibility of Cavity Vacuum Forming of Laminate Fabrics | |
| Extensional Vibration Performance | |
| Exterior Weatherability of Integrally Colored Plastics | |
| Extraction of Threads for Percent Lubricant and Percent Resin | |
| Fastener Rating Scale | |
| Fastening Strengths of Hook and Loop Tapes | |
| Finish Durability Requirements for Decorative Interior Plastic Parts | |
| Firmness of Padding | |
| Flagging, Allowance and General Material Specification for Interior Cut and Sewn Vinyl Coated Fabrics | |
| Flagging, Allowance and General Material Specification for Moldable Vinyls | |
| Flagging, Allowance and General Material Specification for Vinyl Tops | |
| Flex Test for Decals | |
| Flocked Fabric Bond to Door Glass Run Channels/Stabilizer Peel Strength Procedure | |
| Flow Measurement for Pumpable Sealants | |
| Foam Laminate Curl Test | |
| Foam Seals and Gaskets, Polyolefin Alloy, Cross-linked | |
| Formability of Unsupported Expanded Vinyl Head Restraint Material | |
| Formability of Unsupported Expanded Vinyl | |
| Fretting Wear Properties of Lubricating Grease | |
| Friction Tape | |
| Fuel and Oil Resistant Hoses Fluoroelastomer Terpolymer - Reinforced | |
| Fume Yellowing of Top Coat from Cathodic ELPO | |
| Galvanic Paint Adhesion Test Procedure for Metal Parts | |
| Gasoline Dip Test for Painted Plastics | |
| Gasoline Puddle Test for Gasoline Fill Areas | |
| Glass Content of Glass Reinforced Plastics | |
| Glass Fiber Reinforced Polyester/Balsa Wood Composite Laminate | |
| GMP Specification - SAE J1344 Cross Reference | |
| Grain Retention of Interior Trim Materials | |
| Gravel/Abrasion Resistant Functional Films | |
| Gravimetric Determination of Carbon Black in Nylon 6 and Nylon 66 | |
| Handling Procedure for Electrostatic Discharge Sensitive Devices for Vehicle Assembly Plants and Dealerships | |
| Hardness Test and Hardness Number Conversions | |
| Hardness Testing - Correction for Rounds | |
| Heel Pad, Floor Carpeting | |
| High Carbon Steel Wire for Boarders and Braces | |
| High Strength Heat Treated Alloy Steel | |
| High Strength, Low Alloy Sheet Steel | |
| High Temperature Expanding Reinforcing Structural Foam | |
| High Temperature Flow Properties of Grease | |
| High Temperature Humidity Aging | |
| High Temperature Performance of Grease | |
| Horizontal Settling of Cathodic ELPO with Agitation | |
| Horizontal Settling of Cathodic ELPO with No Agitation | |
| Hot Rolled Alloy Steel Special Section | |
| Hot Rolled Steel Rod, Wire & Bar - Boron Treated | |
| Hot Rolled Steel Wire for Bolts with Recessed Heads | |
| Hydraulic Brake Hose Assemblies - Non-Jounce Coupled Stainless Steel Reinforced PTFE | |
| Hydraulic Brake Hose Assembly | |
| Hydrolytic Stability | |
| Immunity to Conducted Sinusoidal Bursts EMC - Component Test Procedure | |
| Immunity to Conducted Transients EMC - Component Test Procedure | |
| Immunity to Electrostatic Discharge EMC - Component Test Procedure | |
| Immunity to Jump Start Voltages EMC - Component Test Procedure | |
| Immunity to Radiated Electromagnetic Fields (BCI Method) EMC - Component Test Procedure | |
| Immunity to Radiated Electromagnetic Fields - (Reverberation Method) EMC - Component Test Procedure | |
| Immunity to Radiated Fields from Power Lines EMC - Component Test Procedure | |
| Impact Test Exterior Body Side Moldings | |
| Impact Test for Plastic Materials (Instrumented or Non-Instrumented) | |
| Internal Cleanliness of Nonmetallic Fuel Tanks | |
| Internal Stress in Nonmetallic Fuel Tanks | |
| International Atlas of Casting Defects | |
| Jounce and Squirm Test | |
| Knife Cross-Hatch Adhesion Test Procedure for Painted Elastomeric Plastic Substrates | |
| Knife Quick Adhesion Test for Stationary Glass Bonding Materials to Paint | |
| Label - Pressure Sensitive, Permanent for Underhood or Protected Exterior | |
| Label - Pressure Sensitive, Printable, without Overlay | |
| Label, Pressure Sensitive, for Glass | |
| Label, Pressure Sensitive, for Interior Use | |
| Label, Pressure Sensitive, for Secondary Surface | |
| Label, Pressure Sensitive, for Wheels | |
| Label, Pressure Sensitive, Parts ID & Anti-Theft | |
| Label, Pressure Sensitive, Tamperproof | |
| Label, Underhood, Export Vehicle | |
| Leak Testing of Nonmetallic Fuel Tanks | |
| Lint Pickup and Lint Retention of Textiles | |
| Long Terne Sheet Steel | |
| Long-Life Automotive Engine Coolant Antifreeze Concentrate - Ethylene Glycol | |
| Low Carbon Hot and Cold Rolled Sheet Steel for Case Hardening Applications | |
| Low Permeability Fuel Filler Hoses, Moderate Temperature | |
| Low Permeability Fuel Filler Hoses | |
| Low Permeation Vapor Lines - Multilayered Construction | |
| Low Pressure Air Injection Reactor Tubing | |
| Low Pressure Fluid Hose | |
| Low-Temperature Torque of Grease | |
| Lubricant - Electrocoat Primer Compatibility | |
| Magnesium Alloy Ingots | |
| Material and Performance Requirements for Induction Hardened (Thread Cutting) Tapping Screws Type D Type F Type T | |
| Measuring Thickness of Gold Deposits | |
| Medium Carbon, Alloyed Steel Barstock | |
| Melting Point of Grease (Glass Tube Method) | |
| Metallized Coating System for Plastics - Bright, Flexible, Weatherable | |
| Metallurgical and Mechanical Requirements for Wheel Nuts | |
| Method for Characterizing Solder Metal | |
| Method for Checking Radial Lip Seal Garter Springs | |
| Method for Corrosion Measurement by Microscopic Techniques | |
| Method for Determining Adhesion of Zinc Coatings on Sheet Steel (Simulated Draw Bead Test) | |
| Method for Determining Compatibility of Adhesives with Vinyl | |
| Method for Determining Hardness of Seal Materials | |
| Method for Determining Lip to Case Eccentricity | |
| Method for Determining Melting Point of Semicrystalline Polymers by Differential Scanning Calorimetry | |
| Method for Determining the Sealing Properties of Vinyl Convertible Top Material | |
| Method for Determining the Soil Pick-Up and Cleanability of Vinyl Materials | |
| Method for Fiberglass Insulation Fallout Measurement | |
| Method for Gaging Seal Lip Diameter | |
| Method for Gaging Seal Lip Opening Pressure | |
| Method for Measuring Peroxide Number Organic Peroxides in Hydrocarbons | |
| Method for Testing Thread and Gasket Sealers | |
| Methods for Determining Plastic Deformation of Sheet Steel | |
| Microhardness Testing | |
| Migration of Oils or Dyestuffs | |
| Mildew Growth | |
| Mildew Resistance - Mixed Culture Method | |
| Mildew Resistance - Pink Stain Test | |
| Mink Pull-Out | |
| Moisture Resistant Coating for Hardboard Panels | |
| MOUNT, RADIOGRAPHIC FILM, DENTAL | |
| Nickel/Zinc Alloy Coated Steel Sheet and Strip | |
| No. 1-D Diesel Fuel, ASTM, Common | |
| No. 1-D Low Sulfur Diesel Fuel, ASTM, Common | |
| No. 2-D Low Sulfur Climatized Diesel Fuel, ASTM, Common | |
| No. 2-D Low Sulfur Diesel Fuel, ASTM, Common | |
| No. 2-D Premium Diesel Fuel, EMA, Common | |
| No.2-D Diesel Fuel, ASTM,Common | |
| Non-Metallic Conduit or Loom | |
| O-Ring Requirements for Flex-Fuel Line Quick Connects | |
| O-Ring Requirements for Fuel Line Quick Connects | |
| Oil Cooler Hose | |
| Oil Separation from Grease | |
| Outdoor Weathering of Automotive Exterior Materials | |
| Oven Aging Test Procedure for Painted Plastic Substrates | |
| Overlay Properties of Vinyl Coated Fabrics for Sidewall Applications | |
| Oxidation Stability of Gasoline in Presence of Copper (Induction Period Method) | |
| Panel Preparation for Weld Compatibility Test for a Sheet Metal Forming Lubricant | |
| Part Performance Requirements of SMC | |
| Penetration Test for Corrosion Preventive Waxes | |
| Percent Asphalt Saturation of Roof Deadening Felt | |
| Performance Requirements - Urethane Coated Ornamentation | |
| Performance Requirements for Air Induction Elastomeric Ducts | |
| Performance Requirements for Engine Cover Gaskets | |
| Performance Requirements for Exterior Plastic Parts | |
| Performance Requirements of a Pumpable Headlamp/Taillamp Adhesive/Sealer | |
| Performance Requirements of Anti-Squeak, Itch, Rattle, Fiber Tape | |
| Performance Requirements of Primed/Bonded Glass "Lace" Reveal Moldings | |
| Performance Requirements of Ultra High Modecular Weight Polyethlene (UHMW PE) Tape | |
| Permeability Test for Fuel Hose and Tubing | |
| Perspiration Resistance | |
| Pigmentation Evaluation | |
| Plastic Fuel and Vapor Lines, Plastic Fuel Filters, Plastic Clips and Studs | |
| Plastic Materials Used in Ash Tray Applications | |
| Plastic Molding Compounds | |
| Plastic Parts | |
| Plastic/Metal Laminate - Sheet Stock | |
| PLASTICS PARTS | |
| Plating Nickel - Zinc Conversion | |
| Pliability of Plastic Material | |
| Pliability of Seat Belt Webbing | |
| Polyurethane Foam for Automotive Seating Applications | |
| Polyurethane Foam for Trim Padding Applications | |
| Powder Topcoat Systems for Nonferrous Engine Covers | |
| Power Factor of Dielectric Foundation Board | |
| Power Steering Remote Reservoir Hose | |
| Power Steering Return Hose | |
| Pre-Painted Galvanneal Sheet Steel for Gasoline and Diesel Fuel Tank Applications | |
| Precoated Sheet Steel for Flex Fuel Tank Applications | |
| Preparation of Acid Rain Solution | |
| Pressure Sensitive Adhesive Coated Cloth Tape | |
| Pressure Testing of Nonmetallic Fuel Tanks | |
| Procedure Determining the Bond Strength of Fiberglass | |
| Procedure for Color and Finish Inspection | |
| Procedure for Determining Heat Build-Up of Insulating Material | |
| Procedure for Determining Rusting of Body Panels Promoted by Trunk Lining Materials | |
| Procedure for Determining the Ability of Dielectrically Bonded Polyurethane Foam to Resist Arcing | |
| Procedure for Determining the Bond Strength of Dielectrically Embossed Aluminum Appliques | |
| Procedure for Determining the Bond Strength of Dielectrically Embossed Sidewall Padding | |
| Procedure for Determining the Extrusion of Dielectrically Bonded Metallized Mylar | |
| Procedure for Determining the Performance Bonding of Bilaminate Heat Seal Film | |
| Procedure for Determining the Relative Power Factor of Dielectric Sealing Tape | |
| Procedure for Inspecting Surfaces of Parts and Molds | |
| Procedure for Measuring Electrical Component Appearance | |
| Procedure for Qualifying Hose Coupling Assemblies | |
| Procedure for Qualifying Nylon Hose Coupling | |
| Procedure for Qualifying Primers and Primer-Surfacers | |
| Procedure for Qualifying Quick-Connector Fittings for Nylon Fuel Line Usage | |
| Procedure for Testing Automotive Miniature Bulbs | |
| Procedure for Testing Flammability of Materials | |
| Procedure for Testing Relays | |
| Procedure for Testing Switches | |
| Procedure to Determine the Female Mold Forming Temperature of Vacuum Material | |
| Procedure to Determine the Relative Power Factor of Fabric used on Vinyl Coated Twill and Knit Constructions | |
| Procedures for Laboratory Accelerated Exposure of Automotive Materials | |
| Process Requirements for Preparing Chrome Plated Parts for Painting | |
| Projection Welding Quality Steel - Electro Galvanized | |
| Protective Finish for Metal Drain Hole Plug Assemblies | |
| Pump Shear Test - ELPO | |
| Quality Control of Lubricants (Infrared Spectrophotometric) | |
| Quality Control of Nodular Iron Castings Steering Knuckle and Disc Brake Caliper Housing | |
| Radiated Emissions from 10 kHz to 1000 MHz EMC - Component Test Procedure | |
| Recommended Practice for Hot Water Immersion Testing | |
| Recommended Practice to Minimize Damage of Electronic Devices Due to Electrostatic Discharge for Electronic Component Suppliers and Service Centers | |
| Repair Procedure for SMC | |
| Residual Pentane Content by Gas Chromatography | |
| Resistance of Coatings to Chemical Etching and Distortion | |
| Resistance Spot Welding Control Procedure | |
| Resistance to Arcing and Charring of Adhesives, Resins and Marking Inks | |
| Resistance to Arcing or Charring of Dielectrically Embossed Materials | |
| Resistance to Cold Cracking of Interior Vinyl Materials | |
| Resistance to Marring or Scuffing | |
| Resistance to Raveling of Woven Textiles | |
| Resistance to Synthetic Perspiration | |
| Resistance to Tuft Removal or Loop Pullout of Floor Coverings | |
| Resistance to Water Spotting, Finish Disturbance, Salt Staining and Discoloration | |
| Resistance to Wicking of Exterior Roof Cover Seams | |
| Rubber - Masticated, Recycled, Molded Sheet Stock | |
| Scab Corrosion Creepback of Paint Systems on Metal Substrates | |
| Scrap - Cast Iron Borings | |
| Scrap - Cast Iron Solids or Crushed Engine Blocks | |
| Scrap - Foundry Heavy Steel or Mixed Dealer Steel, 600 mm and under - Approx. 2 ft | |
| Scrap - No. 1 Factory Steel Bundles | |
| Scrap - No. 1 Shredded Industrial Steel | |
| Scrap - No. 2 Dealer Steel Bundles | |
| Scrap - No.1 Steel Busheling 600 mm and under - Approx. 2 ft | |
| Scrap - Shredded Auto Steel Body | |
| Scrap - Steel Forging Flashing, 600 mm and under - Approx. 2 ft | |
| Scrap - Steel Machine Shop Turnings | |
| Scrap - Steel Punching | |
| Scratch Resistant PVC Sheet | |
| Screen Analysis of Polystyrene Beads | |
| Seam Strength of Automotive Materials | |
| Seamless Alloy Steel Mechanical Tubing | |
| Selection and Specification of Steel and Cast Iron Scrap for Use in Foundry Iron Charges | |
| Shear Adhesion Test for Adhesives Used in Glass Bonding Procedure | |
| Sheet Metal Forming Lubricant - Compatibility with Zinc-Rich Weld-Through Primer | |
| Sheet Metal Rating Scale | |
| Sheet Metal Surface Texture Measurements | |
| Shell Process Foundry Practice | |
| Shrinkage, Grain Loss, Gloss and Color Change Vacuum Forming Material | |
| Sliding Entry Test | |
| Sodium Chloride Immersion Test for Hose Clamps | |
| Soft Interior Trim Parts | |
| Solvent Rub Method for Determining Cure of Painted Metal or Plastic Substrates | |
| Source Performance Evaluation and Reporting Procedure - Fasteners | |
| Spring Hose Clamp | |
| Spring Materials Chrome Vanadium Steel Spring Wire | |
| Spring Materials Oil Tempered Carbon Steel Valve Spring Wire | |
| Standard for Automotive Flashers | |
| Standard Practice for Designating Plastic Materials and Marking Plastic Parts | |
| Standard Practice for Specifying Electrical Component Appearance | |
| Standard Practice for Specifying Oil Pressure Sensors/Switches | |
| Standard Practice for Specifying Radial Lip Type Seals | |
| Standard Practice for Specifying Relays | |
| Standard Practice for Specifying Switches | |
| Standard Reliability Program for Relays | |
| Steel Castings | |
| Steel Sheet, Low Carbon | |
| Stitch Tear Resistance of Vinyl Coated Genuine Leather | |
| Stress-Strain Limits of Non-Woven Material | |
| Striation - Resistant Engine Coolant Hose | |
| Sunlamp Exposure Test | |
| Surface Irregularities of Unsupported Expanded Vinyl (Pyramid Method) | |
| Surface Waviness Evaluation - Loria Analyzer | |
| Switch/Relay Durability Test Stand | |
| Switches and Relays Component Cleanliness | |
| Tape Adhesion Test for Paint Finishes | |
| Tear Strip Test | |
| Tensile Test for Safety Belt Anchor Bolts | |
| Test for Bond Strength of Adhesive | |
| Test for Bond Strength of Solvent Type Adhesives | |
| Test for Chatter Characteristics of Lubricants for Limited Slip Differentials | |
| Test for Cleanability of Textiles and Plastics | |
| Test for Cold Shock Resistance of Sealers, Deadeners and Vinyl Films | |
| Test for Compatibility of Adhesives with Vinyl | |
| Test for Determining Acoustic Transparency of a Speaker Covering | |
| Test for Determining Impact Strength of Plastics | |
| Test for Dimensional Stability | |
| Test for Effect of Copper on Propylene Plastic | |
| Test for Evaluating Heat Expandable Type Sealers | |
| Test for Evaluating Paint Film Distinctness of Image | |
| Test for Evaluating Zinc Phosphate Coating | |
| Test for Fogging Characteristics of Plastics | |
| Test for Gasoline Extractables in Hose | |
| Test for General Motors Vapor Pressure (GMvp) | |
| Test for Heat Curing Sealer | |
| Test for Intrinsic Melt Viscosity of Thermoplastic Resins | |
| Test for Mastic Type Windshield Sealers | |
| Test for Measuring Expansion of Sealers | |
| Test for Metal to Metal Sealers - Adhesives | |
| Test for Mildew Resistance of Paper and Wood Products | |
| Test for Prevailing Torque Nuts (Hand Qualification Test) | |
| Test for Prevailing Torque Nuts | |
| Test for Raveling of Netting | |
| Test for Resistance to Cold Cracking of Vinyl Coated Fabric | |
| Test for Resistance to Hydrogen Sulfide Staining | |
| Test for Resistance to Odor of Textiles | |
| Test for Settling Characteristic of Adhesives | |
| Test for Shrinkage, Grain Loss, Gloss and Color Change of Vacuum Forming Material | |
| Test for Solid Content of Adhesives and Sealers | |
| Test for Solvent Barrier Properties of Primer | |
| Test for Staining Characteristics of Adhesives and Sealers | |
| Test for Stress Mark Susceptibility of Plastic Materials | |
| Test for Tack Range of Adhesives | |
| Test for Tensile Strength of a Channeled Zipper Chain | |
| Test for the Bond Strength of Dielectrically Embossed Trim Material | |
| Test for the Embossing Properties of Dielectrically Bonded Flat Vinyl Coated Metallized Mylar | |
| Test for the Hot Bond Strength of Extruded Molding | |
| Test for the Staining of Trim Materials | |
| Test for Thermal-Oxidative Stability Characteristics of Plastics | |
| Test for Viscosity of Adhesives and Sealers | |
| Test for Volatiles in Silicone Rubber | |
| Test for Water and Shock Resistance of Plastisol Sealers | |
| Test for Wear Resistance of Plastics | |
| Test for Weld Through Sealers | |
| Test for Weldability of Weld Through Sealers | |
| Test Fuels | |
| Test Method for Determining the Sulfur Content of a Barrier Treated Nonmetallic Fuel Tank | |
| Test Method to Determine Fiber Weight Loss and Wear on Carpet | |
| Test Procedure for Determining Water Permeability | |
| Test Procedure to Determine the Tear Characteristics of Vacuum Forming Material | |
| Test Procedure to Determine Warpage | |
| Testing Oil Pressure Sensors and Switches | |
| Thermal Shock Test for Paint Adhesion | |
| Thickness of Nonwoven Backed Vinyls | |
| Throw Power of Electrodeposition Primers | |
| Thumbnail Hardness Test for Painted Parts | |
| Time Link-Up Test, Stationary Glass Primer to Paint | |
| Tool Dimensional Tolerances for Structural Composite Panel Molds | |
| Tool Finishing Tolerances for Class A Plastic Part Molds | |
| Topcoat Adhesion of Vinyls | |
| Topcoat Adhesion Test for Finished Leather | |
| TOPCOAT PIGMENTATION TEST PROCEDURE | |
| Torque Tension Test | |
| Total Moisture Content of Polystyrene Beads and Pellets | |
| Total Saponifiable Matter | |
| Trim Lip Load Force | |
| Trimethylamine in Fiberglass Parts | |
| Ultraviolet/Visible Transmission Through Cured Paint Film | |
| Undervehicle and Underhood Component Rating Scale | |
| Unleaded Gasoline, AAMA Common | |
| Unleaded Gasoline, ASTM, Common | |
| Urethane - Weather Resistant, for Poured Lens | |
| Variable Surface Temperature Heat Exposure Test | |
| Vehicle Suspension - U-Bolt Coating | |
| Vertical Rise Method of Determining Volume Change of Sealers | |
| Vibration Damping Material - Heat Bondable | |
| Vibration Test for Adhesive for Bonding Stationary Glass to Paint | |
| Visual Discontinuity Inspection Procedure for Automotive Glazing Materials | |
| Volatility Characteristics of Lubricants (Pan Evaporation) | |
| Water Absorption Test for Adhesives and Sealants | |
| Water Jet Test | |
| Water Repellency Test | |
| Water Spray Resistance of Grease | |
| Water-Activated Adhesive Markable Label for Interior Use | |
| Wear or Abrasion of Textiles on Seat Squirm Machine | |
| Wear Resistance - Canvas Belt Wear Tester | |
| Wear Resistance - RCA Wear Tester | |
| Wear Resistance of Coated Genuine Leather | |
| Wear Resistance of Hot Stamps & Related Products by the Falling Sand Method | |
| Weathering Exposure Tests for Interior Trims | |
| Weatherstrip Extraction for COF Applications | |
| Weatherstrip Flock Fiber Density | |
| Weld Strength of Nonmetallic Fuel Tank Components | |
| Welded Steel Mechanical Tubing for Hydroforming Prrocesses | |
| White Corrosion Rating Scale | |
| Wicking and Blistering of Convertible Top and Roof Trim Materials | |
| Wool Felt | |
| Zinc Coated, High Strength, Low Alloy Sheet Steel | |
| Zinc Phosphate Crystal Size Determination Using "Faxfilm" Replication |
| << Prev | Next >> |