Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
780
790
800
810
820
830
831
832
833
834
835
836
837
838
839
840
841
842
843
850
860
870
880
890
900
950
1000
1050
1100
1150
1200
1500
1620
| Product Name | Notes |
|---|---|
| (R) Configuration Management Standard Implementation Guide | |
| (R) Data Management | |
| (R) Logistics Product Data Handbook | |
| (R) Logistics Product Data | |
| (R) Long Term Storage of Electronic Devices | |
| (R) Program Management/Systems Engineering Guidelines for Managing the Transition to Lead-Free Electronics | |
| (R) Reliability Program Standard for Systems Design, Development, and Manufacturing | |
| (R) Requirements for Using Robotic Hot Solder Dip to Replace the Finish on Electronic Piece Parts | |
| (R) Standard Best Practices for System Safety Program Development and Execution | |
| (R) Standard for Developing a Lead-Free Control Plan to Manage the Risks of Lead-Free Solders and Finishes in Aerospace, Defense, and High-Performance Soldered Electronic Products | |
| 2019 Buyer's Guide | |
| 2019 Casting Source Directory | |
| 2020 Buyer's Guide | |
| 2021 Casting Source Directory | |
| A NEMA Ground Fault Personnel Protection Section White Paper \x97 GFCI Replacement Recommendation | |
| A NEMA Ground Fault Personnel Protection Section White Paper\x97Ground-Faul t Circuit Interrupter (GFCI) Fact Sheet | |
| A Policy on Geometric Design of Highways and Streets | |
| A Policy on Geometric Design of Rural Highways | |
| AASHTO LRFD Bridge Design Guide Specifications for GFRP-Reinforced Concrete | |
| AASHTO LRFD Bridge Design Guide Specifications for GFRP\x96Reinforced Concrete | |
| Achieving airtightness: General principles | |
| Achieving airtightness: Practical guidance on techniques - floors, walls and roofs | |
| Achieving airtightness: Practical guidance on techniques - windows and doors, sealing methods and materials | |
| Aerospace Qualified Electronic Component (AQEC) Requirements, Volume 1 - Integrated Circuits and Semiconductors | |
| ALBUMINOMETER | |
| ALIDADES, SURVEYING: TELESCOPE | |
| Annex B to Part B - Example of the preparation of CDRs | |
| Annex C to Part B - UK Data Item Description For Manufacturing Data Pack - UK DID MDP | |
| Annex D to Part B - Documentation For Inclusion In An Operation, Or Repair And Maintenance Data Pack CDR | |
| Annex E to Part B - Letter From CDP To The CBI | |
| APPLICATOR, DISPOSABLE | |
| APPLICATOR, METAL | |
| Applying flood resilience technologies | |
| ARBOR AND BAND SET, DENTAL HANDPIECE | |
| ARTICULATORS, DENTAL | |
| Assessing external rendering for replacement or repair | |
| ATOMIZER, HAND | |
| BAND AND BAND SET, MATRIX, DENTAL, TOFFLEMIRE | |
| BAND, ABRASIVE, (SILICON CARBIDE) | |
| BANDAGE, CAST, PLASTER OF PARIS IMPREGNATED (HARD COATED) | |
| Basement construction and waterproofing: Part 1: Site investigation and preparation | |
| Basement construction and waterproofing: Part 2: Construction, safety, insulation and services | |
| BASEPLATE, DENTAL | |
| BATH, WATER, DENTAL IMPRESSION COMPOUND, THERMOSTATICALLY CONTROLLED | |
| BATH, WHIRLPOOL | |
| BLADES AND FRAME, DENTAL LABORATORY SAW | |
| BLOCK, BITE | |
| BLOCK, SOLDERING, DENTAL | |
| BLOOD GAS APPARATUS | |
| BLOWPIPE, SOLDERING, DENTAL LABORATORY | |
| BOOKREST | |
| BOUGIE, EUSTACHIAN, SET OF FIVE | |
| BOX, TISSUE EMBEDDING | |
| Bracing trussed rafter roofs | |
| BRACKET, X-RAY FILM HANGER, RADIOGRAPHIC, STORAGE | |
| BREATHING APPARATUS, SELF-CONTAINED | |
| BROACHES, PULP CANAL, BARBED, DENTAL | |
| BRUSH, BRISTLE, DENTAL HANDPIECE (MANDREL MOUNTED) | |
| BRUSH, FIBER, ROTARY WHEEL (DENTAL) | |
| BRUSH, SURGICAL SCRUB | |
| Building a new felted flat roof | |
| Building brickwork or blockwork retaining walls | |
| Building damp-free cavity walls | |
| Building in winter | |
| Building masonry with lime-based mortars | |
| Building on brownfield sites; Part 1. Identifying the hazards | |
| Building on brownfield sites; Part 2. Reducing the risks | |
| Building on brownfield sites | |
| Building reinforced, diaphragm and wide plan freestanding walls | |
| Building simple plan brick or blockwork freestanding walls | |
| Building without cold spots | |
| BUR, DENTURE TRIMMING | |
| BURNER, ALCOHOL, PRESSURE-TYPE | |
| BURNER, OUTFIT, GAS, DENTAL LABORATORY | |
| BURS, DENTAL EXCAVATING, TUNGSTEN CARBIDE | |
| CABINETS, COMPARTMENTED, METAL; DENTAL, FOR PORCELAIN TEETH | |
| CABINETS, INSTRUMENT, MEDICAL | |
| CALENDAR PADS AND STANDS | |
| CALIPER, EYE, CASTROVIEJO | |
| CALIPER, VERNIER (LABORATORY) | |
| CALIPER, X-RAY TECHNIQUE | |
| CAMERA, STILL PICTURE, PRESS TYPE, 4 X 5 INCH | |
| CANNULA SET, INTRAVENOUS | |
| CANNULA, BRAIN, FRAZIER | |
| CANNULA, EYE, CYCLODIALYSIS (CASTROVIEJO), 10 MM | |
| CANNULA, LARYNGEAL | |
| Carbon monoxide detectors | |
| CARRIAGE, PAIL | |
| CART, CLINICAL CHART HOLDER | |
| CARVERS, DENTAL, AMALGAM AND WAX | |
| CASSETTE CHANGER | |
| CASSETTES, RADIOGRAPHIC FILM (MEDICAL) | |
| CATHETER, CARDIOVASCULAR (FLOW DIRECTED, THERMODILUTION) | |
| CATHETERS, URETHRAL, (X-RAY, GRADUATED) | |
| CATHETERS, URETHRAL, WOVEN (BRAIDED) | |
| CHEST, X-RAY FILM PROTECTIVE | |
| CHISELS (CUTTING INSTRUMENT), DENTAL | |
| CHISELS, DENTURE-TRIMMING, LABORATORY | |
| Choosing external rendering | |
| CLAMP, CIRCUMCISION | |
| CLAMP, HEMORRHOID, BUIE | |
| CLAMP, RUBBER TUBING, SHUTOFF | |
| Climate change | |
| CLIP, SUTURE, MICHEL | |
| CLOCK, ALARM (GENERAL PURPOSE) | |
| CLOCKS, WALL (QUARTZ CRYSTAL-BATTERY OPERATED) | |
| CLOCKS, WALL (SYNCHRONOUS MOTOR) | |
| Code of Practice for TUPE Transfers in MOD Contracts | |
| COFFEE-MAKER SET, VACUUM (GAS OR ELECTRIC) | |
| COLOR MARKING OF THERMOPLASTIC INSULATED HOOK-UP WIRE | |
| Common Data Schema for Complex Systems | |
| COMPASS, DRAFTING, PIVOT, DROP SPRING BOW: PEN AND PENCIL, WITH CASE | |
| COMPASSES, MAGNETIC: SURVEYOR'S AND TRANSIT, POCKET; WITH OPTIONAL BALL JOINT AND JACOB'S STAFF | |
| CONE, FELT, DENTAL GRINDING AND POLISHING MACHINE | |
| Connecting walls and floors; Part 1. A practical guide | |
| Connecting walls and floors; Part 2. Design and performance | |
| Connecting walls and floors | |
| Construction and demolition waste | |
| Construction site communication; Part 1. General | |
| Construction site communication; Part 2. Masonry | |
| Construction site communication | |
| Contracting for a shared Data Environment Service | |
| COPYHOLDER, TYPIST'S | |
| COUNTER, RECIPROCATING, HANDHELD (SUPEDSEDED BY A-A-2723) | |
| COUNTING APPARATUS, BACTERIAL COLONY AND PLATE, COUNTING BACTERIOLOGICAL | |
| COVID-19 Gu\xeda de Limpieza y Desinfecci\xf3n para Equipos El\xe9ctricos | |
| CRUTCHES, ADJUSTABLE | |
| CUP, POLISHING, DENTAL HANDPIECE (SCREW STEM) | |
| CURETTE, EAR, BILLEAU (A-A-54980) | |
| CURETTE, MASTOID, SPRATT | |
| CURETTES, ALVEOLAR (MOLT AND MILLER) | |
| CURING UNIT, DENTURE, TWO STAGE | |
| CURVES, DRAFTING, REGULAR AND IRREGULAR: CURVE SETS, DRAFTING, REGULAR AND IRREGULAR | |
| CURVES, FRENCH (IRREGULAR), SET OR INDIVIDUAL | |
| CURVES, MECHANICAL ENGINEERS' (IRREGULAR), SET | |
| CURVES, RAILROAD (REGULAR), SET OR INDIVIDUAL | |
| CURVES, SHIP (IRREGULAR) SET OR INDIVIDUAL | |
| CYSTOSCOPE | |
| Data Management | |
| DEPRESSOR, TONGUE, METAL | |
| DEPRESSOR, TONGUE, WOOD | |
| DEPTH PERCEPTION APPARATUS | |
| Derating of Electronic Components | |
| DICTIONARIES, ENGLISH | |
| Diminishing Manufacturing Sources and Material Shortages (DMSMS) Management Practices | |
| DISK ABRASIVE (SILICON CARBIDE) | |
| DISK, ABRASIVE; MANDREL, DENTAL HANDPIECE | |
| DISPENSER, COTTON PELLET, DENTAL | |
| DISPENSER, GUMMED TAPE (ELECTRICALLY OPERATED) | |
| DISPENSER, GUMMED TAPE | |
| DISPENSER, PRESSURE-SENSITIVE ADHESIVE TAPE | |
| DISPENSER, PRESSURE-SENSITIVE TAPE (FOR FILAMENT-REINFORCED TAPE) | |
| DISPENSER, STRIP, DENTAL | |
| Disposing of rainwater | |
| DISTILLING APPARATUS, LABORATORY | |
| DIVIDER, SPACING, EQUAL | |
| Domestic chimneys for solid fuel \x96 flue design and installation | |
| Domestic floors: assessing them for replacement or repair; Part 2. Concrete floors, screeds and finishes | |
| Domestic floors: assessing them for replacement or repair; Part 3. Timber floors and decks | |
| Domestic floors: repairing or replacing floors and flooring; Part 4. Magnesite, tiles, slabs and screeds | |
| Domestic floors: repairing or replacing floors and flooring; Part 5. Wood blocks and suspended timber | |
| Domestic floors; Part 1. Construction, insulation and damp-proofing | |
| Domestic floors | |
| DRAFTING INSTRUMENT SETS: AND DRAFTING INSTRUMENTS | |
| DRAWING BOARD AND DRAWING BOARD TRESTLES | |
| ENVELOPE, PHOTOGRAPHIC NEGATIVE, PAPER | |
| Equality of Information in Price Fixing Non-Competitive Contracts And Amendments | |
| Erecting, fixing and strapping trussed rafter roofs | |
| Evaluaci\xf3n de Equipos El\xe9ctricos Da\xf1ados por Fuego y Calor | |
| Evaluating Water-Damaged Electrical Equipment | |
| Foundations for low-rise building extensions | |
| Fraud, Regularity and Propriety - Code of Procurement Ethics | |
| Freestanding brick walls \x96 repairs to copings and cappings | |
| Gating Design for 3D Printed Sand | |
| General conditions of contract (AS 2124-1992) - Together with General conditions of tendering and form of tender (AS 2125-1992) Form of formal instrument of agreement (AS 2127-1992) | |
| General conditions of contract for the supply of equipment with or without installation (AS 2987-1987) - Together with form of formal instrument of agreement (AS 2988-1987) | |
| General Overview of the T.510-Series Recommendations - Telematic Services Terminal Equipments and Protocols for Telematic Services (Study Group VIII) 16 pp | |
| General Safety Requirements Common to ANSI B11 Machines | |
| General Specification for Consultants, Industrial and Municipal: NEMA Premium Efficency Electric Motors (600 Volts or Less) | |
| Genetics of Developmental Disabilities | |
| GEOMETRIC DIMENSIONING AND TOLERANCING HANDBOOK: APPLICATIONS, ANALYSIS & MEASUREMENT | |
| GEOP (Gas Engineering & Operating Practices) Series - all 11 Books | |
| GEOP Series: Automation and Telecommunications, Book 3, Vol. II | |
| GEOP Series: Compressor Station Operations, Book 2, Vol. II | |
| GEOP Series: Corrosion Control/System Protection, Book 1, Vol. VI | |
| GEOP Series: Gas Control, Book 4, Vol. II | |
| GEOP Series: Gas Utilization, Book 1, Vol. V | |
| GEOP Series: Mains and Services - Operating Considerations, Book 2, REVISED | |
| GEOP Series: Pipelines/Planning and Economics, Book 1, Vol. II | |
| GEOP Series: Supplemental Gases - Peak Shaving/Base Load, Book 2, Vol. I | |
| GEOP Series: System Design, Book I, Vol. III | |
| GEOP Series: Transmission and Distribution Measurement, Book 1, Vol. IV | |
| GEOP Series: Underground Storage, Book 1, Vol. 1 | |
| GeoServer Beginner\x92s Guide | |
| Geosynthetics Specifier's Guide | |
| Get ahead! SURGERY: 100 EMQs for Finals | |
| Get Through MRCOG Part 1: MCQs and EMQs | |
| Getting Started with Gulp | |
| Getting Started with Hazelcast | |
| Getting Started with Kubernetes | |
| Getting Started with MariaDB | |
| Getting Started with Meteor.js JavaScript Framework | |
| Getting Started with Tableau 2018.x | |
| Getting Started with Terraform | |
| Getting Started with Unity 5 | |
| Getting Started with Unity | |
| Gu\xeda de evaluaci\xf3n de equipos el\xe9ctricos da\xf1ados por terremotos | |
| Guide for Contracting, Selecting, and Managing Consultants in Preconstruction Engineering | |
| Guide for Design of Pavement Structures | |
| Guide for Enhancement of Highway Safety Directed to Agencies, Programs and Standards | |
| Guide Specifications for Fracture Critical Non-Redundant Steel Bridge Members as Revised by Interim Specifications for Bridges 1981, 1983, 1984, 1985 and 1986 | |
| Guide to Competition for the Casual Competitor | |
| Guidelines and Definitions By-Products of Aluminum Melting Processes | |
| Guidelines on Citizen Participation in Transportation Planning | |
| Habitability guidelines for existing housing | |
| Handbook: The Program Managers' Guide to the Integrated Baseline Review Process | |
| IMPLEMENTATION GUIDE FOR COMMON DATA SCHEMA FOR COMPLEX SYSTEMS PACKAGE *** CONTAINS GEIA-HB-927 AND GEIA-STD-927 AT A REDUCED PRICE *** | |
| Implementation Guide for Common Data Schema for Complex Systems | |
| Implementation Guide for Configuration Management | |
| Implementation Guide for Data Management | |
| Implementing The 2003 General Review of the Profit Formula For Non-Competitive Government Contracts from 1 July 2004 | |
| Installing domestic automatic door controls | |
| Installing domestic automatic window controls | |
| Installing fire doors and doorsets | |
| Installing fire protection to structural steelwork | |
| Installing thermal insulation; Good site practice | |
| Installing wall ties | |
| Insulated external cladding systems | |
| Insulated profiled metal roofs | |
| Insulating ground floors | |
| Insulating masonry cavity walls; Part 1. Techniques and materials | |
| Insulating masonry cavity walls; Part 2. Principal risks and guidance | |
| Insulating masonry cavity walls | |
| Insulating roofs at rafter level: sarking insulation | |
| Insulating solid masonry walls | |
| Joist hangers | |
| Legionellosis Guideline Practices to Reduce the Risk of Legionellosis from Evaporative Heat Rejection Equipment Systems | |
| Level external thresholds: reducing moisture penetration and thermal bridging | |
| Lighting; Part 1. General principles | |
| Lighting; Part 2. Domestic and exterior | |
| Lighting; Part 3. Non-domestic | |
| Lighting | |
| Loft conversion; Part 1: Structural considerations | |
| Loft conversion; Part 2: Safety, insulation and services | |
| Loft conversion | |
| Logistics Product Data | |
| Maintaining exterior wood finishes | |
| Manual of Organization and Procedure | |
| Minimising noise from domestic fan systems; Fan-assisted radon mitigation systems | |
| Offsite construction: an introduction | |
| Outline guide to assessment of traditional housing for rehabilitation | |
| Partnering between MOD and its Suppliers | |
| PEN, BALLPOINT | |
| Performance Standard for Aerospace and High Performance Electronic Systems Containing Lead-free Solder | |
| Performance Testing for Aerospace and High Performance Electronic Interconnects Containing Pb-free Solder and Finishes | |
| Plasterboard: Fixing and finishing separating and compartmenting walls and floors | |
| Plasterboard: Part 2: Fixing and finishing non-separating walls and floors | |
| Plasterboard:Part 1: Types and their applications | |
| Plastering and internal rendering: Design and specification | |
| Plastering and internal rendering: Workmanship | |
| Plastering and internal rendering | |
| Policy on Geometric Design of Highways and Streets | |
| Program Management/Systems Engineering Guidelines For Managing The Transition To Lead-Free Electronics | |
| Protecting pipes from freezing | |
| Providing temporary support during work on openings in external walls | |
| Provisions and Conditions of Contract | |
| RADON PROTECTION FOR NEW DOMESTIC EXTENSIONS AND CONSERVATORIES WITH SOLID CONCRETE GROUND FLOORS | |
| RADON PROTECTION FOR NEW DWELLINGS Avoiding problems and getting it right! | |
| RADON PROTECTION FOR NEW LARGE BUILDINGS | |
| Reducing the Risk of Tin Whisker-Induced Failures in Electronic Equipment | |
| Reed beds; Part 1. Application and specification | |
| Reed beds; Part 2. Design, construction and maintenance | |
| Reed beds | |
| Reliability Program Standard for Systems Design, Development, and Manufacturing | |
| Removing internal loadbearing walls in older dwellings | |
| Repairing external rendering | |
| Repairing or replacing lintels | |
| Replacing failed plaster | |
| Requirements for Using Robotic Hot Solder Dip to Replace the Finish on Electronic Piece Parts | |
| Retro-installation of bed joint reinforcement in masonry | |
| Rework/Repair Handbook to Address the Implications of Lead-Free Electronics and Mixed Assemblies in Aerospace and High Performance Electronic Systems | |
| Roles, Responsibilities & Authority of Industrial Observers in the Public/Private Partnerships Programme | |
| Sequential-Sampling Plan for Use in Classification of the Particulate Cleanliness of Air in Cleanrooms and Clean Zones | |
| Simple foundations for low-rise housing; Part 1. Site investigation | |
| Simple foundations for low-rise housing; Part 2. 'Rule of thumb' design | |
| Simple foundations for low-rise housing; Part 3. Groundworks: getting it right | |
| Simple foundations for low-rise housing | |
| Single European Currency - Preparation for Economic and Monetary Union (EMU) - Introduction of the Euro | |
| Site-cut pitched timber roofs; Part 1. Design | |
| Site-cut pitched timber roofs; Part 2. Construction | |
| Site-cut pitched timber roofs | |
| Sound insulation in dwellings - Part 1: An introduction | |
| Sound insulation in dwellings Part 2: New-build | |
| Sound insulation in dwellings Part 3: Material change of use (conversions) | |
| Standard for Mitigating the Effects of Tin Whiskers in Aerospace and High Performance Electronic Systems | |
| Style Manual for Standards and Other Publications of TechAmerica | |
| Supplement to the AASHTO Guide for Design of Pavement Structures Volume 2 | |
| Supplementary guidance for assessment of timber-framed houses; Part 1. Examination | |
| Supplementary guidance for assessment of timber-framed houses; Part 2. Interpretation | |
| Surveying brick or blockwork freestanding walls | |
| Surveying masonry chimneys for repair or rebuilding | |
| System Configuration Management Implementation Template (Oriented for a U.S. Military Contract Environment) | |
| TechAmerica Technical Fellow and Associate Technical Fellow Nomination and Selection Handbook | |
| Technical Guidelines for Aerospace and High Performance Electronic Systems Containing Lead-free Solder and F inishes | |
| Temporary support for openings in external walls: assessing load | |
| The Intellectual Property Rights (IPR) DEFCONs | |
| The Next Generation of Systems Engineering: A Report by the GEIA G-47 Systems Engineering Panel | |
| The Profit Formula and Government Accounting Conventions Applicable from 1 April 1999 to Non-Competitive Government Contracts | |
| The Quality Mark Scheme | |
| Thin layer mortar masonry | |
| Tiling and slating pitched roofs: Design criteria, underlays and battens | |
| Tiling and slating pitched roofs: natural and manmade slates | |
| Tiling and slating pitched roofs: plain and profiled clay and concrete tiles | |
| Tiling and slating pitched roofs | |
| Timber frame construction: an introduction | |
| TUPE Transfers in MOD Contracts - New Arrangements for Staff Pensions | |
| Use of Semiconductor Devices Outside Manufacturers\xb4 Specified Temperature Ranges | |
| Variation Of Price (VOP) | |
| Ventilated and unventilated cold pitched roofs | |
| Ventilating thatched roofs | |
| Working with local businesses and residents |
| << Prev | Next >> |