Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
500
550
600
650
700
750
780
790
800
810
820
830
835
836
837
838
839
840
841
842
843
844
845
846
847
850
860
870
880
890
900
950
1000
1050
1100
1150
1200
1500
1620
| Product Name | Notes |
|---|---|
| (V13) Luggage Utility Index (Reference) | |
| 95th Percentile Shoe | |
| A/C Metallic Lines Specification | |
| AASHTO Guide Specification for Horizontally Curved Steel Girder Highway Bridges - With Design Examples for I-Girder and Box-Girder Bridges | |
| AASHTO GUIDE SPECIFICATIONS FOR HORIZONTALLY CURVED STEEL GIRDER HIGHWAY BRIDGES | |
| Accumulator/Dehydrat or | |
| Adhesive, Sodium Silicate Base | |
| Adhesive, Weatherstrip | |
| Air Conditioning Refrigerant System Connections | |
| Animal Glue | |
| Antifreeze Methyl Alcohol Type | |
| Automotive and Refrigeration Steel Tubing | |
| Automotive Engine Coolant Antifreeze Concentrate - Ethylene Glycol Type | |
| Automotive Engine Coolant Antifreeze Concentrate - Ethylene Glycol | |
| Bending Boards | |
| Boric Acid | |
| Cargo Volume Index | |
| Casting Defects Handbook: Aluminum & Aluminum Alloys | |
| Casting Defects Handbook: Copper & Copper-Base Alloys | |
| Casting Defects Handbook: Iron & Steel | |
| Casting Defects HB and Gas Porosity Chart Set | |
| Casting Defects Manual: Ferrous Alloys | |
| Cement, Rubber, High Heat Resistant | |
| Cement, Trim, Sprayable | |
| Cement, Trim, Transparent | |
| Cement, Water Dispersed | |
| Charge Air Cooler Specification | |
| Chromium Trioxide (Chromic Acid Anhydride) | |
| Common Structural Rules for Bulk Carriers and Oil Tankers - Rules for Classification and Construction | |
| Compendium of Greenhouse Gas Emissions Estimation Methodologies for the Oil and Gas Industry | |
| Composite Bearing Material | |
| Concise Castings: A Casting Workshop Lecture | |
| Condenser Specification | |
| Convenience Net Assembly | |
| CONVEYORS | |
| Coolant Surge Tank Cap | |
| Corrosion Inhibitor for Engine Coolant | |
| Corrosion Protective Coatings Iron Phosphate/ Black Zinc Primer/ Black Topcoat | |
| Cyanide Copper Cyanide | |
| Cyanide Potassium Cyanide (Liquid) | |
| Cyanide Potassium Cyanide | |
| Cyanide Sodium Cyanide | |
| Cyanide Zinc Cyanide | |
| Decorative Interior Wood Components | |
| Designated Seating Position | |
| Dielectric Embossing Foundation Boards | |
| Dielectric Embossing Subfoundation Board | |
| Dimension Codes and Terms | |
| Dimension Definitions | |
| Dimension Index - Alphabetical and Numerical Listings | |
| Dimensions for Typical Items Carried in Interior Stowage Compartments | |
| Dimensions for Typical Items Carried in Truck/Cargo Areas (Other than, SAE Luggage) | |
| Disposable Protective Film | |
| Door and Quarter Panel Trim Pad Dielectric Tufting Felt | |
| Drafting Templates | |
| Emblem/Label, Heat Transfer, Exterior, Underhood | |
| Engine Cooling Fan Specification | |
| Engine Cover Fastener Grommets | |
| Engine Manifold Gaskets | |
| Export Measurement Procedures - GM Japan | |
| Export Technical Specifications | |
| Exterior Dimensions - Height Description - Passenger Car | |
| Exterior Dimensions - Length Description - Passenger Car | |
| Exterior Dimensions - Width Description - Passenger Car | |
| Eyellipse Templates | |
| Ferritic and Pearlitic (Armasteel) Malleable Iron Castings | |
| Fibrous Sound Absorber Materials | |
| Fifth Percentile Shoe | |
| Foundation Hardboard | |
| Foundation Panel Board - Waterproof | |
| Front of Dash Sealing Requirements for Gasket Materials | |
| GAUGES | |
| General Characteristics of GM Steels (Not Part of the Specifications) | |
| Git Essentials | |
| GitHub Essentials | |
| Glass and Glazing Estimating Essentials | |
| Glass Area Description - Passenger Car | |
| Glass Fiber Insulation Material - Non-Interior | |
| Glazing Manual - 50th Anniversary Edition | |
| Glider How To | |
| GLOBAL HARMONISATION TASK FORCE GUIDELINES FOR REGULATORY AUDITINGOF QUALITY SYSTEMS OF MEDICAL DEVICE MANUFACTURERS GENERAL REQUIREMENTS: 1999 FINAL DOCUMENT | |
| Glossary for the Gas Industry | |
| Glossary of Architectural Glass & Glazing | |
| Glossary of Oilfield Production Terminology (GOT) (Definitions and Abbreviations) | |
| GM/UMTRI Packaging Model Application and Accomodation Interpretation | |
| GM/UMTRI Packaging Model for Driver Packaging Spatial Guidelines | |
| GM/UMTRI Packaging Model | |
| Good Building Guides | |
| Gray Iron Castings | |
| Green Sand Additives | |
| Grommet Rubber | |
| Ground Clearance Dimensions - Height Description - Passenger Car | |
| Guide for High-Occupancy Vehicle (HOV) Facilities | |
| Guide for the Design of High Occupancy Vehicle Facilities | |
| Guidelines for Historic Bridge Rehabilitation and Replacement | |
| Head Position Contour Templates | |
| Head with Hair Accommodation Seated Width | |
| Hidden Cargo Capacity | |
| High Strength Die Drawn Steel Bars | |
| I-Rules for Classification and Construction Ship Technology Part 0-Classification and Surveys | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 1-Hull Structures | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 10-Refrigerating Installations | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 11-Bridge Arrangement and Equipment on Seagoing Ships | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 12-Chemical Recovery Vessels | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 14-Redundant Propulsion and Steering Systems | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 15-Dynamic Positioning Systems | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 16-Harmony Class \x96 Rules on Rating Noise and Vibration for Comfort, Cruise Ships (v = 25 kn) | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 17-Guidelines for Machinery Condition Monitoring | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 18-Harmony Class \x96 Rules on Rating Noise and Vibration for Comfort, Cruise Ships (v > 25 kn) | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 19-Guidelines for the Carriage of Refrigerated Containers on Board Ships | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 2-Machinery Installations | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 20-Stowage and Lashing of Containers | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 21-Ventilation | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 22-Guidelines for the Construction of Polar Class Ships | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 23-Harmony Class - Rules on Rating Noise and Vibration for Comfort, Cargo Ships | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 24-Guidelines for Compliance with MLC 2006 Noise and Vibration Requirements | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 3-Electrical Installations | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 4-Automation | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 5-Structural Rules for Container Ships | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 5a-Supplementary Rules for Application of Steel with Yield Strength of 460 N/mm2 as well as Extremely Thick Steel Plates... | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 6-Liquefied Gas Carriers | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 7-Chemical Tankers | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 8-Fishing Vessels | |
| I-Rules for Classification and Construction Ship Technology Part 1-Seagoing Ships Chapter 9-Oil Recovery Vessels | |
| I-Rules for Classification and Construction Ship Technology Part 2-Inland Navigation Vessels Chapter 1-Classification and Surveys | |
| I-Rules for Classification and Construction Ship Technology Part 2-Inland Navigation Vessels Chapter 2-Hull Design and Construction | |
| I-Rules for Classification and Construction Ship Technology Part 2-Inland Navigation Vessels Chapter 3-Machinery, Systems and Electricity | |
| I-Rules for Classification and Construction Ship Technology Part 2-Inland Navigation Vessels Chapter 4-Additional Requirements for Notations | |
| I-Rules for Classification and Construction Ship Technology Part 3-Special Craft Chapter 1-High Speed Craft | |
| I-Rules for Classification and Construction Ship Technology Part 3-Special Craft Chapter 2-Yachts = 24 m | |
| I-Rules for Classification and Construction Ship Technology Part 3-Special Craft Chapter 3-Yachts and Boats up to 24 m | |
| I-Rules for Classification and Construction Ship Technology Part 3-Special Craft Chapter 4-Guidelines for Lifeboats and Rescue Boats | |
| I-Rules for Classification and Construction Ship Technology Part 3-Special Craft Chapter 6-Preliminary Rules for Patrol Boats | |
| I-Rules for Classification and Construction Ship Technology Part 3-Special Craft Chapter 7-Guidelines for the Structural Design of Racing Yachts = 24 m | |
| I-Rules for Classification and Construction Ship Technology Part 4-Rigging Technology Chapter 1-Tall Ship Rigs | |
| I-Rules for Classification and Construction Ship Technology Part 4-Rigging Technology Chapter 2-Guidelines for Design and Construction of Large Modern Yacht Rigs | |
| I-Rules for Classification and Construction Ship Technology Part 4-Rigging Technology Chapter 3-Guidelines for the Type Approval of Carbon Strand and PBO Cable Rigging for Sailing Yachts | |
| I-Rules for Classification and Construction Ship Technology Part 4-Rigging Technology Chapter 4-Guidelines for Maintenance and Inspection of Tall Ship Rigs | |
| I-Rules for Classification and Construction Ship Technology Part 5-Underwater Technology Chapter 1-Diving Systems and Diving Simulators | |
| I-Rules for Classification and Construction Ship Technology Part 5-Underwater Technology Chapter 2-Manned Submersibles | |
| I-Rules for Classification and Construction Ship Technology Part 5-Underwater Technology Chapter 3-Unmanned Submersibles (ROV, AUV) and Underwater Working Machines | |
| I-Rules for Classification and Construction Ship Technology Part 6-Offshore Service Vessels Chapter 1-Hull Structures | |
| I-Rules for Classification and Construction Ship Technology Part 6-Offshore Service Vessels Chapter 2-Machinery and Systems | |
| I-Rules for Classification and Construction Ship Technology Part 6-Offshore Service Vessels Chapter 3-Crew Boats and Offshore Wind Farm Service Craft | |
| II-Rules for Classification and Construction Materials and Welding Part 1-Metallic Materials Chapter 1-Principles and Test Procedures | |
| II-Rules for Classification and Construction Materials and Welding Part 1-Metallic Materials Chapter 2-Steel and Iron Materials | |
| II-Rules for Classification and Construction Materials and Welding Part 1-Metallic Materials Chapter 3-Non-Ferrous Metals | |
| II-Rules for Classification and Construction Materials and Welding Part 1-Metallic Materials Chapter 4-Equipment | |
| II-Rules for Classification and Construction Materials and Welding Part 1-Metallic Materials Chapter 5-Materials for Propeller Fabrication | |
| II-Rules for Classification and Construction Materials and Welding Part 1-Metallic Materials Chapter 6-Special Materials for Naval Ships | |
| II-Rules for Classification and Construction Materials and Welding Part 2-Non-Metallic Materials Chapter 1-Fibre Reinforced Plastics and Bonding | |
| II-Rules for Classification and Construction Materials and Welding Part 2-Non-metallic Materials Chapter 2-Wooden Materials | |
| II-Rules for Classification and Construction Materials and Welding Part 2-Non-metallic Materials Chapter 3-Guidelines for Elastomeric Adhesives and Adhesive Joints | |
| II-Rules for Classification and Construction Materials and Welding Part 3-Welding Chapter 1-General Requirements, Proof of Qualifications, Approvals | |
| II-Rules for Classification and Construction Materials and Welding Part 3-Welding Chapter 2-Design, Fabrication and Inspection of Welded Joints | |
| II-Rules for Classification and Construction Materials and Welding Part 3-Welding Chapter 3-Welding in the Various Fields of Application | |
| III-Rules for Classification and Construction Naval Ship Technology Part 0-Classification and Surveys | |
| III-Rules for Classification and Construction Naval Ship Technology Part 1-Surface Ships Chapter 1-Hull Structures and Ship Equipment | |
| III-Rules for Classification and Construction Naval Ship Technology Part 1-Surface Ships Chapter 2-Propulsion Plants | |
| III-Rules for Classification and Construction Naval Ship Technology Part 1-Surface Ships Chapter 3a-Electrical Installations | |
| III-Rules for Classification and Construction Naval Ship Technology Part 1-Surface Ships Chapter 3b-Automation | |
| III-Rules for Classification and Construction Naval Ship Technology Part 1-Surface Ships Chapter 4-Ship Operation Installations and Auxiliary Systems | |
| III-Rules for Classification and Construction Naval Ship Technology Part 2-Sub-Surface Ships Chapter 1-Submarines | |
| III-Rules for Classification and Construction Naval Ship Technology Part 2-Sub-Surface Ships Chapter 2-Remotely Operated Underwater Vehicles | |
| III-Rules for Classification and Construction Naval Ship Technology Part 2-Sub-Surface Ships Chapter 3-Guidelines for Air Independent Power Systems for Underwater Use | |
| Implementing Manufacturing Process Automation in Metalcasting Facilities | |
| Improving the Effectiveness of Visual Inspection | |
| In-Tank Oil Cooler Specification | |
| Informational Guide for Roadway Lighting | |
| Insulation - Basalt Rock Fiber Composite | |
| Interior Dimensions - Enclosed Truck and MPV, 4th and 5th Seat Width, Height and Length | |
| Interior Dimensions - Height Description - Passenger Car | |
| Interior Dimensions - Length Description - Passenger Car | |
| Interior Dimensions - Station Wagon, Third Seat Width, Height and Length Description - Passenger Car | |
| Interior Dimensions - Width Description - Passenger Car | |
| Interior Trim Substrate Materials | |
| IV-Rules and Guidelines Industrial Services Part 6-Offshore Installations Chapter 7-Guideline for the Construction of Fixed Offshore Installations in Ice Infested Waters | |
| IV-Rules for Classification and Construction Additional Rules and Guidelines Part 2-Loading Gear Chapter 2-Loading Gear on Seagoing Ships and Offshore Installations | |
| IV-Rules for Classification and Construction Industrial Services Part 11-Machinery and Civil Engineering Works Chapter 1-Ship Lifts and Ro-Ro Ferry Ramps | |
| IV-Rules for Classification and Construction Industrial Services Part 6-Offshore Technology Chapter 1-Classification, Certification and Surveys | |
| IV-Rules for Classification and Construction Industrial Services Part 6-Offshore Technology Chapter 2-Mobile Offshore Units | |
| IV-Rules for Classification and Construction Industrial Services Part 6-Offshore Technology Chapter 3-Fixed Offshore Installations | |
| IV-Rules for Classification and Construction Industrial Services Part 6-Offshore Technology Chapter 4-Structural Design | |
| IV-Rules for Classification and Construction Industrial Services Part 6-Offshore Technology Chapter 5-Machinery Installations | |
| IV-Rules for Classification and Construction Industrial Services Part 6-Offshore Technology Chapter 6-Electrical Installations | |
| IV-Rules for Classification and Construction Industrial Services Part 6-Offshore Technology Chapter 9-Guideline for Personnel Transfers by Means of Lifting Appliances | |
| IV-Rules for Classification and Construction Industrial Services Part 7-Offshore Substations Chapter 2-Structural Design | |
| IV-Rules for Classification and Construction Industrial Services Part 7-Offshore Substations Chapter 3-General Safety | |
| IV-Rules for Classification and Construction Industrial Services Part 7-Offshore Substations Chapter 4-Machinery and Utility Systems | |
| IV-Rules for Classification and Construction Industrial Services Part 7-Offshore Substations Chapter 5-Electrical Equipment | |
| IV-Rules for Classification and Construction Industrial Services Part 7-Offshore Substations Chapter 6-Instrumentation | |
| IV-Rules for the Certification and Construction Industrial Services Part 7-Offshore Substations Chapter 1-Certification and Surveys | |
| Knee Contour (Driver\xb4s Shin) Left-Hand Drive Application | |
| Knee Restraint Zone Development Procedures - Driver and Front Seat Passenger | |
| Kraft Liner | |
| Label, Interior, Heat Transfer | |
| Label, Jack Usage, on Tether | |
| Lead State Teams of the AASHTO Technology Implementation Group (TIG) | |
| Lighting Arrangement Dimensions | |
| LINE GUIDE, LETTERING, ADJUSTABLE, PLASTIC | |
| Loading Luggage in Vehicle with Second Fold Down Seat Back | |
| Lock Cylinder Gaskets | |
| Lost Foam Casting Made Simple | |
| Low Permeation Fuel and Vapor Lines- Multilayered Construction | |
| Luggage Capacities and Index Volumes | |
| Marking Solution | |
| Metalcasting Dictionary | |
| Microstructure Development During Metalcasting | |
| Miscellaneous - Measurement Procedures | |
| Miscellaneous Solder Metals Powdered Tin - Lead Solder Metal | |
| Miscellaneous Solder Metals | |
| Mold & Core Coatings Manual | |
| Mold & Core Test Handbook | |
| Nickel and Stannate Salts Nickel Carbonate | |
| Nickel and Stannate Salts Nickel Chloride | |
| Nickel and Stannate Salts Nickel Sulfate | |
| Nickel and Stannate Salts Potassium Stannate | |
| Nickel and Stannate Salts Sodium Stannate | |
| Nickel Anodes | |
| Nitric Acid | |
| Occupant Rear View | |
| Paper - Deflector Compartment Front Finishing | |
| Paper - Door and Quarter Inner Panel Water Deflector | |
| Passenger Distribution and Seat Facing Direction | |
| Pedal Dimension Definitions | |
| Pedal Dimensions Required to Define Pedal Configuration | |
| Performance and Durability Requirements for Exterior Rearview Mirrors | |
| Performance Requirements - Exterior Acrylic Ornamentation, Second Surface Decorated | |
| Phosphate Treated, Electrolytic Zinc Coated Sheet Steel | |
| PNEUMATIC EQUIPMENT | |
| Polyurethane Foam - Acoustical | |
| Powder Topcoats for Interior Metal Components | |
| Protective Film - Adhesive Backed | |
| Protrusion and Frame Cross Section Dimensions | |
| Quality Castings | |
| Quality Control Systems in the Foundry | |
| Radiator Cap | |
| Radiator Specification | |
| Reading Lamp Illumination Level and Zone Template | |
| Receiver/Dehydrator | |
| Recoverable Energy Absorbing Foam | |
| Refrigerant Fitting Shipping Cap Specification | |
| Refrigerant Hose and Coupling HFC134a | |
| Restricted and Reportable Chemicals | |
| Roadway Lighting Design Guide | |
| Sealer - Pumpable, Bodyshop | |
| Sealing Compounds for Use with Fasteners and Attaching Clips | |
| Selection and Use of Bearing and Bushing Alloys and Sleeve Bearing Composites | |
| Selection and Use of Sintered Metal Powder | |
| Selection and Use of Spring Materials | |
| Selection, Specification and Use of Brazing Fluxes | |
| Slim Line Sealing Washer | |
| Soldering Fluxes Ammonium Chloride, Water Solution | |
| Soldering Fluxes Citric Acid Soldering Flux | |
| Soldering Fluxes Citric Acid, Alcohol, Glycerine Soldering Flux | |
| Soldering Fluxes Rosin, Alcohol Soldering Flux | |
| Soldering Fluxes Rosin, Alcohol, Lactic Acid Soldering Flux | |
| Soldering Fluxes Zinc Chloride Soldering Flux (Paste) | |
| Soldering Fluxes Zinc Chloride Soldering Flux | |
| Soldering Fluxes Zinc Chloride Stabilizer Soldering Flux (Powder) | |
| Soldering Fluxes Zinc Chloride, Ammonia-Free Solder Flux | |
| Soldering Fluxes Zinc Chloride, Ammonium Chloride Soldering Flux | |
| Sound Barrier Assembly Laminates | |
| Sound Barrier Material - Interior | |
| Specifications for Chemical Compositions of GM Steels | |
| Spring Materials Beryllium Copper Wire | |
| Spring Materials Brass Wire | |
| Spring Materials Carbon Steel Spring Strip | |
| Spring Materials Chrome Silicon Spring Steel Wire | |
| Spring Materials Hard Drawn Carbon Steel Valve Spring Wire | |
| Spring Materials Hard Drawn High Carbon Steel Spring Wire | |
| Spring Materials Hard Drawn Stainless Steel Wire | |
| Spring Materials High Tensile, Hard Drawn, Steel Spring Wire | |
| Spring Materials Oil Tempered Chrome Vanadium Steel Spring Wire | |
| Spring Materials Phosphorous Bronze Wire and Rod | |
| Standard Requirements - Adhesives | |
| Standard Requirements - Plastics | |
| Station Wagon and Hatchback Cargo Space Dimensions Width, Height and Length | |
| Stitching Wire | |
| Sulfuric Acid | |
| SYRINGE AND HYPODERMIC NEEDLE, DISPOSABLE, STERILE | |
| SYRINGES, HYPODERMIC, NEEDLE LOCK GLASS, 3 ML (CC) | |
| T-SQUARE (PLASTIC, WOOD, AND WOOD AND PLASTIC) | |
| TABLES; DRAWING, TRACING, AND SCRIBING | |
| TAPES, MEASURING (STEEL SURVEYORS') | |
| Technology of Metalcasting | |
| TEMPLATE, DRAFTING FLOWCHART, (AUTOMATIC DATA PROCESSING, FEDERAL INFORMATION PROCESSING SYSTEM) | |
| TESTER, ANTIFREEZE SOLUTIONS | |
| TESTER, BATTERY ELECTROLYTE SOLUTION | |
| TESTER, DENSITY AND MOISTURE (SOIL AND ASPHALT), NUCLEAR METHOD | |
| Thermal Insulation - Aramid Pressboard | |
|
THERMOMETER, SELF INDICATING, LIQUID IN GLASS, MINIMUM, (METEOROLOGICAL) -- GG-T-356B VALID NOTICE 1
Thermometer, Self Indicating, Liquid in Glass, Minimum, (Meteorological) -- GG-T-356B VALID NOTICE 2
Thermometer, Self Indicating, Liquid in Glass, Minimum, (Meteorological) -- GG-T-356B VALID NOTICE 3
|
THERMOMETER, SELF INDICATING, LIQUID IN GLASS, MINIMUM, (METEOROLOGICAL) |
| THERMOMETER, SELF-INDICATING, LIQUID IN GLASS, MAXIMUM (METEOROLOGICAL) | |
| THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (LABORATORY) | |
| THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS (PATIENT'S BATH) | |
| THERMOMETER, SELF-INDICATING, LIQUID-IN-GLASS FOR MACHINERY & PIPING SYSTEMS | |
| THERMOMETERS, SELF-INDICATING BIMETALLIC | |
| THERMOMETERS, SELF-INDICATING, LIQUID-IN-GLASS | |
| THERMOMETERS, SELF-INDICATING, MERCURY IN GLASS (FEVER) | |
| THIMBLE, EXTRACTION | |
| Three-Dimensional H-Point Machine | |
| TIME-STAMPS (CORRESPONDENCE) | |
| TIMER, INTERVAL, SPRING-DRIVEN, PHOTOGRAPHIC | |
| TONOMETER, OPHTHALMIC, SCHIOTZ | |
| Tools - Corporate Design Packaging | |
| TRANSIT, ONE-MINUTE; AND TRANSIT TRIPODS | |
| Transmission Oil Cooler Line Joint | |
| TRAYS, IMPRESSION, DENTAL | |
| TRIANGLES, DRAFTING, ADJUSTABLE, PLASTIC | |
| TRIANGLES, DRAFTING, PLASTIC, TRANSPARENT | |
| TRIANGLES, DRAFTING, STEEL, BEAD SUPPORTS AND LIFTING KNOB | |
| TRIANGLES, DRAFTING: LINE GUIDES, LETTERING, ADJUSTABLE AND NONADJUSTABLE (GENERAL SPECIFICATION) | |
| TRIANGLES, DRAFTING: STEEL, OPEN CENTER | |
| TRIANGLES, LINE GUIDE, LETTERING, NONADJUSTABLE, PLASTIC | |
| TRIMMER, ANIMAL TOENAIL | |
| TRIMMER, PAPER, DROP KNIFE | |
| TRIMMERS, GINGIVAL MARGIN, DENTAL | |
| Truck Cargo Dimensions - Height | |
| Truck Cargo Dimensions - Length | |
| Truck Cargo Dimensions - Width | |
| Truck Exterior Dimensions - Height | |
| Truck Exterior Dimensions - Length | |
| Truck Exterior Dimensions - Width | |
| Truck Interior Dimensions, Engine Compartment Width, Height and Length | |
| TUBE, CAPILLARY, BLOOD SAMPLE | |
| TUBE, DUODENAL, SURGICAL, REHFUSS | |
| URINAL, MALE PATIENT, GLASS AND CORROSION-RESISTING STEEL | |
| V-Rules for Classification and Construction Analysis Techniques Part 1-Hull Structural Design Analyses Chapter 1-Guidelines for Global Strength Analysis of Container Ships | |
| V-Rules for Classification and Construction Analysis Techniques Part 1-Hull Structural Design Analyses Chapter 2-Guidelines for Fatigue Strength Analyses of Ship Structures | |
| V-Rules for Classification and Construction Analysis Techniques Part 1-Hull Structural Design Analyses Chapter 3-Guidelines to Assess High-Frequency Hull Girder Response of Container Ships | |
| V-Rules for Classification and Construction Analysis Techniques Part 1-Hull Structural Design Analyses Chapter 4-Guidelines for Global Strength Analysis of Multipurpose Vessels | |
| V-Rules for Classification and Construction Analysis Techniques Part 2-Risk Analyses Chapter 1-Guidelines for the Analysis of Alternative Design and Arrangements | |
| VAPORIZER, MEDICINAL (ELECTRIC) | |
| Vehicle Frontal Area Description - Passenger Car | |
| Vehicle Set Up Procedures | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 1-Container Technology Chapter 1-Guidelines for the Construction, Repair and Testing of Freight Containers | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 10-Corrosion Protection Chapter 1-Coating of Ballast Water Tanks | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 10-Corrosion Protection Chapter 2-Guidelines for Corrosion Protection and Coating Systems | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 10-Corrosion Protection Chapter 3-Corrosion Protection of Crude Oil Cargo Tanks | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 10-Guidelines on Ballast Water Management | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 11-Guidelines for the Preparation of Operating and Maintenance Manuals for Shell Doors | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 2-Preliminary Guidelines for Safe Return to Port Capability of Passenger Ships | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 3-Guidelines for Sea Trials of Motor Vessels | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 4-Chamber Systems for Tunnelling | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 5-Guidelines for Extended Dry-Dock Interval | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 6-Guidelines for the Preparation of Damage Stability Calculations and Damage Control Documentation on Board | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 7-Guidelines for Loading Computer Systems | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations and Systems Chapter 9-Guidelines for the Condition Assessment Program | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 11-Other Operations Chapter 8-Guidelines and Approval Procedure for "In Service Inclining Test Systems" (ISITS) | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 12-Environment Protection Chapter 2-Ship Recycling Related Certification Processes | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 12-Environmental Protection Chapter 1-Guidelines for the Environmental Service System | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 13-Energy Efficiency Chapter 1-Guidelines for Determination of the Energy Efficiency Design Index | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 3-Machinery Installations Chapter 1-Guidelines for the Use of Gas as Fuel for Ships | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 3-Machinery Installations Chapter 11-Guidelines for the Use of Fuel Cell Systems on Board of Ships and Boats | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 3-Machinery Installations Chapter 4-Guidelines for Equipment on Fire Fighting Ships | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 3-Machinery Installations Chapter 5-Guidelines for Design, Equipment and Testing of Gas Welding Installations on Seagoing Ships | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 3-Machinery Installations Chapter 6-Guidelines for the Construction, Equipment and Testing of Closed Fuel Oil Overflow Systems | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 3-Machinery Installations Chapter 7-Guidelines for the Design, Construction and Testing of Pumps | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 4-Diesel Engines Chapter 1-Guidelines for Mass Produced Engines | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 4-Diesel Engines Chapter 2-Calculation of Crankshafts for Internal Combustion Engines | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 4-Diesel Engines Chapter 3-Guidelines for the Seating of Propulsion Plants and Auxiliary Machinery | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 6-Modular Certification System Chapter 2-Guidelines for the Inspection of Mechanical and Electrotechnical Products | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 1-Procedure | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 2-Test Requirements for Electrical / Electronic Equipment and Systems | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 4-Test Requirements for Sealing Systems of Bulkhead and Deck Penetrations | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 5-Test Requirements for Complex Data Networks | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 6-Test Requirements for Electrical Machinery | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 7-Test Requirements for Statical Converters with Semi-Conductors | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 7-Guidelines for the Performance of Type Approvals Chapter 8-Test Requirements for Components and Systems of Mechanical Engineering and Offshore Technology... | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 8-Electrical Engineering Chapter 5-Guidelines for the Restoration of Electrical Systems following Damage caused by Fire, Water and Extinguishing Agents | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 9-Materials and Welding Chapter 2-Guidelines for the Fabrication and Inspection of Welded Pipelines of Copper-Nickel-Alloys | |
| VI-Rules for Classification and Construction Additional Rules and Guidelines Part 9-Materials and Welding Chapter 5-Guidelines for the Approval of Reaction Plastics and Composite Materials for the Seating and Repair of... | |
| Vibration Control Material for Doubler Plate, Pre - Elpo Applications | |
| Vibration Damping Pad - Pre/Post-ELPO Applied | |
| VIEWER, X-RAY FILM, (PHOTOFLUOROGRAPHIC FILM, FLUORESCENT, 115 VOLT, 60 CYCLE, ALTERNATING CURRENT) | |
| VIEWERS, DENTAL RADIOGRAPHIC FILM, 110 VOLT, AC-DC | |
| WASHERS, BEDPAN AND URINAL | |
| WATCH, WRIST | |
| Welded or Seamless Steel Pipe | |
| WELDING | |
| Wet-Wipe Windshield Washer Tubing | |
| WHEEL, ABRASIVE, IMPREGNATED RUBBER, PUMICE | |
| WHEEL, BUFFING, CLOTH, DENTAL | |
| WHEEL, POTTER'S | |
| WHEELS, ABRASIVE, (SILICON CARBIDE, MOUNTED, DENTAL) | |
| WHEELS, LATHE, SILICON CARBIDE, DENTAL | |
| Windshield Washer Tubing | |
| WIRE, SNARE (SPRING STEEL, MEDICAL) | |
| X-RAY APPARATUS SET, RADIOGRAPHIC AND FLUOROSCOPIC, MEDICAL |
| << Prev | Next >> |