Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
450
500
550
600
650
700
740
750
760
770
780
790
798
799
800
801
802
803
804
805
806
807
808
809
810
820
830
840
850
860
870
900
950
1000
1050
1100
1150
1500
1620
| Product Name | Notes |
|---|---|
| "E" CERTIFICATION MARK REQUIRED CODE BOOKS - ASME ELECTRIC BOILERSCERTIFICATION & ACCREDITATION PACKAGE - INCLUDES ASME BPVC-I, BPVC-IIA, BPVC-IIB, BPVC-IID, ASME B31.1 AND ASME CA-1 | |
| 2013 Passenger Car Yearbook | |
| 2014 Passenger Car Yearbook and Concept Car Year in Review: 2013 | |
| 2015 Passenger Car and 2014 Concept Car Yearbook | |
| 2016 Passenger Car and 2015 Concept Car Yearbook | |
| 45 Degree Flared Tube Connectors - Preferred Parts | |
| 45 DEGREE PIPE ELBOWS (Noun Code - 2940) | |
| 45 Degree Street Elbows - 90 Degree Street Elbows | |
| 6-Volt Lamp Bulbs - Preferred Parts (Noun Code - 4960) | |
| 90 Degree Reducing Pipe Elbows | |
| Abuse Slam Test | |
| ACRYLONITRILE RUBBER, DUST SEAL | |
| ACTIVATING SOLUTION \x96 IMMERSION PHOSPHATE SYSTEM ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ADDITIVE, ENGINE OIL, SERVICE | |
| ADHESIVE, CONTACT, GASKET AND SEAL | |
| ADHESIVE, MALE THREADED FASTENER - FOR SERVICE TEMPERATURES BELOW 65 \xb0C ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ADHESIVE, MALE THREADED FASTENER, FOR SERVICE TEMPERATURES BELOW 135 C | |
| ADHESIVE, POLYAMIDE - HOT MELT - LOW FLOW | |
| ADHESIVE, RUBBER | |
| ADHESIVE, SYNTHETIC ELASTOMER BASE \x96 MASTIC - ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ADHESIVE, SYNTHETIC RUBBER - OIL RESISTANT | |
| ADHESIVE, THERMOSETTING - FOR FICTION MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ADHESIVE, THERMOSETTING - FOR FRICTION MATERIALS ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ADHESIVE, THERMOSETTING, FOR FRICTION MATERIALS | |
| ADR 21/00 Instrument Panel Impact Test Procedure | |
| Angular Gaskets - General Specifications (Noun Code - 3720) | |
| Angular Gaskets - Preferred Parts (Noun Code - 3720) | |
| ANODIZE, ALUMINUM - SULPHURIC ACID TYPE | |
| ANTIFREEZE ADDITIVE, FUEL SYSTEMS | |
| ANTIFREEZE MATERIALS \x96 WINDSHIELD WASHER RESERVOIR ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ANTIFREEZE SOLUTION, WINDSHIELD WASHER | |
| Area Standard Parts - Part Number Listing | |
| Automotive 90 Degree Pipe Elbows Extruded Type - 90 Degree Pipe Street Elbows - 45 Degree Pipe Street Elbows - 45 Degree Pipe Elbows | |
| Automotive Hexagon Socket Pipe Plugs and Drain Plugs | |
| Automotive Pipe Adapters - Reducer Adapters | |
| Automotive Pipe Fittings - General Specifications (Noun Code - 3300) | |
| Automotive Pipe Fittings - Non-Preferred Parts | |
| Automotive Pipe Fittings - Preferred Parts | |
| Automotive Pipe Plugs and Drain Plugs - Non-Preferred Parts (Noun Code - 6400) | |
| Automotive Pipe Plugs and Filler Drain Plugs - General Specifications (Noun Code - 6400) | |
| Automotive Pipe Plugs, Fillers, and Drain Plugs (Noun Code - 6400) | |
| Automotive Pipe Plugs, Fillers, and Drain Plugs - Preferred Parts (Noun Code - 6400) | |
| Automotive Pipe Reducer Couplings - Couplings | |
| Automotive Pipe Tees Extruded Type | |
| Automotive Straight Thread Filler and Drain Plugs General Specifications (Noun Code - 6400) | |
| AUTOMOTTVE TUBE FITITNGS (Noun Code - 3300) GENERAL SPECIFICATIONS | |
| Ball Joints - General Specifications - (Noun Code - 4770) | |
| Ball Joints - Non-Preferred Parts (Noun Code - 4770) | |
| Ball Joints - Preferred Parts (Noun Code - 4770) | |
| Ball Sleeve Tube Components - Non-Preferred Parts | |
| Bearing Lock Nuts (Noun Code - 5780) General Specifications | |
| Bearing Lock Nuts - General Information - Metric Series | |
| Bearing Lock Nuts - General Specifications (Noun Code - 5780) | |
| Bearing Lock Nuts Metric Series General Information | |
| Bearing Lock Washers - General Information - Metric Series | |
| Bearing Lock Washers - General Specifications - Metric Series (Noun Code - 9720) | |
| Bearing Lock Washers - Preferred Parts - Metric Series (Noun Code - 9720) | |
| Bearing Lock Washers \x96 Preferred Parts \x96 Metric Series (Noun Code \x96 9720) | |
| Bearing Lock Washers Metric Series (Noun Code - 9720) General Specifications | |
| Bearing Lock Washers Metric Series General Information | |
| Bearing Locknuts - General Specifications - Metric Series (Noun Code - 5780) | |
| Bearing Locknuts - Preferred Parts - Metric Series (Noun Code - 5780) | |
| Bracket - General Information - Metric Series | |
| Bracket - General Specifications - Metric Series | |
| Brackets - Angle - 2 Hole - Preferred Parts (Noun Code - 0150 or 8790) | |
| Brackets - Flat - 2 Hole - Preferred Parts (Noun Code - 0001) | |
| Brackets - General Specifications | |
| Break Mandrel Blind Rivets - Metric Series (Noun Code - 7220) - General Specifications | |
| Break Mandrel Blind Rivets - Metric Series (Noun Code - 7220) - Preferred Parts | |
| Break Mandrel Blind Rivets - Metric Series General Information | |
| Button Plugs - General Specifications (Noun Code - 6400) | |
| Button Plugs - Non-Preferred Parts (Noun Code - 6400) | |
| Button Plugs - Preferred Parts (Noun Code - 6400) | |
| CABLE BATTERY FLEXIBLE | |
| CARPET, CUT PILE, POLYPROPYLENE | |
| CATALYST, ACID-SCRYLIC ENAMEL, POLYESTER BASECOAT CLEARCOAT LOW BAKE REPAIR PROCESS (MALEIC ACID) ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Chamfered End Straight Pins - Not Recommended - (Noun Code 6200) | |
| Chamfered Straight Pins - General Specification (Noun Code 6200) | |
| CHEMICAL COATING, ALUMINUM ALLOYS | |
| Clamps - General Specifications (Noun Code - 8090) | |
| Clamps - General Specifications - Metric - Inch Series (Noun Code - 1640) | |
| Clamps - Metric - Inch Series (Noun Code - 1640) | |
| CLEANER POLISH, LIQUID - SILICONE | |
| CLEANER, AUTOMATIC CHOKE AND CARBURETOR LINKAGE | |
| CLEANER, BRIGHT METAL | |
| CLEANER, CARBURETOR AND COMBUSTION CHAMBER | |
| CLEANER, GLASS | |
| CLEANER, HAND - WATERLESS | |
| CLEANER, RADIATOR FLUSH - NON-ACID | |
| CLEANER, RECONDITIONING - ENGINE EXTERIOR AND ENGINE COMPARTMENT | |
| CLEANER, RECONDITIONING - MULTI-PURPOSE AUTOMOTIVE | |
| CLEANER, TAR AND ROAD OIL REMOVER | |
| CLEANER, WASH AND WAX CONCENTRATE | |
| CLEANER, WHITE WALL TIRE | |
| Clevis Pins - General Information - Metric Series | |
| Clevis Pins - General Specifications (Noun Code - 6200) | |
| Clevis Pins - General Specifications - Metric Series (Noun Code - 6200) | |
| Clevis Pins - Non-Preferred Parts (Noun Code - 6200) | |
| Clevis Pins - Preferred Parts (Noun Code - 6200) | |
| Clevis Pins - Preferred Parts - Metric Series (Noun Code - 6200) | |
| Closed Clamps - General Specifications - Metric-Inch Series (Noun Code - 1640) | |
| Closed Clamps - Non Preferred Parts - Metric - Inch Series (Noun Code - 1640) | |
| Closed Clamps - Preferred Parts Metric - Inch Series (Noun Code - 1640) | |
| Closed Clamps General Specifications Metric Inch Series (Noun Code 1640) | |
| Closed Clamps Metric-Inch Series (Noun Code - 1640) Non=Preferred | |
| Closed Cushion Clamps \x96 General Specification and Parts List \x96 Metric/Inch Series (Noun Code 1640) | |
| Closed Cushion Clamps \x96 General Specifications\x96 Metric \x96 Inch Series (Noun Code \x96 1640) | |
| Closed Cushion Clamps \x96 Metric/Inch Series \x96 Parts List (Noun Code: 1640) | |
| Closure Stiffness Testing | |
| CLOTH, DUSTING | |
| Coiled Spring Pins - General Specifications (Noun Code -6200) | |
| Coiled Spring Pins - Non Preferred Parts (Noun Code - 6200) | |
| Coiled Spring Pins - Preferred Parts (Noun Code - 6200) | |
| Coiled Spring Pins - Preferred Parts - Metric Series (Noun Code - 6200) | |
| Concept Car Year in Review: 2013 | |
| COPPER WIRE-BATTERY CABLE-, #3 GAGE | |
| Cork Plugs - General Specifications (Noun Code - 6400) | |
| Cork Plugs - General Specifications Metric Series - (Noun Code - 6400) | |
| Cork Plugs - Preferred Parts (Noun Code - 6400) | |
| CORROSION PREVENTIVE COMPOUND, SPRAYABLE | |
| CORROSION PROTECTIVE COATING, ALUMINUM BASECOAT, ORGANIC OR INORGANIC TOPCOAT | |
| CORROSION PROTECTIVE COATINGS, ALUMINUM BASECOAT, ORGANIC OR INORGANIC TOPCOAT | |
| Cotter Pins - Self Opening - Conversion List- General Information | |
| Cup Plugs - (Noun Code - 6400) | |
| Cup Plugs - General Information - Metric Series | |
| Cup Plugs - General Specifications (Noun Code 6400) | |
| Cup Plugs - General Specifications - Metric Series (Noun Code - 6400) | |
| Cup Plugs - Non-Preferred Parts (Noun Code - 6400) | |
| Cup Plugs - Preferred Parts (Noun Code -6400) | |
| Cup Plugs - Preferred Parts - Metric Series (Noun Code - 6400) | |
| DECAL, PRESSURE SENSITIVE ADHESIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Demisting of Vehicle Windscreen for Categories MA MC ADR 15 | |
| Door Weatherstrip Slam Test | |
| Drain and Shut-Off Cocks - General Specifications (Noun Code - 9620) | |
| Drain Cocks - Preferred Parts (Noun Code - 9620) | |
| ELASTOMER, POLYESTER, MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| ELASTOMER, POLYESTER, MOLDING COMPOUND | |
| ENAMEL, CORROSION RESISTANT - CHASSIS BLACK | |
| Engineering Standard Parts Product Graphic Decal or Transfer | |
| Engineering, Material, and Performance Requirements for Carbon steel Tapping Screws *** TO BE USED WITH FORD WSS-M99P1111-A*** | |
| EPR Technical Code for Fire protection | |
| Escutcheon Pins - General Specifications (Noun Code - 6200) | |
| Escutcheon Pins - Preferred Parts (Noun Code - 6200) | |
| Essentials of the Mechanics of Materials | |
| Ethics and Legal Issues for Doctoral Nursing Students | |
| ETHYLENE ACRYLIC RUBBER, LOW TEMPERATURE RESISTANT - TEAR RESISTANT, OIL SEAL | |
| ETHYLENE/ACRYLIC (AEM) RUBBER, LOW COMPRESSION SET, OIL SEAL | |
| ETHYLENEDIAMINE CAS # 107-15-3 ORAL RISK ASSESSMENT DOCUMENT | |
| Executive Summary Literature Review Impact of Gasoline Blended with Ethanol on the Long-Term Structural Integrity of Liquid Petroleum Storage Systems and Components | |
| Expansion Plugs - General Specifications (Noun Code - 6400) | |
| Expansion Plugs - Non-Preferred Parts(Noun Code - 6400) | |
| Expansion Plugs - Preferred Parts (Noun Code - 6400) | |
| Fastener Clips - General Specifications (Noun Code - 1700) | |
| FELT, SYNTHETIC FIBER, FOR FILTERING AUTOMATIC TRANSMISSION FLUID | |
| FLOW CONTROL ADDITIVE ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| FLUID, AUTOMATIC TRANSMISSION - 100% SYNTHETIC - SERVICE FILL - DEXRON II - RED | |
| FLUID, AUTOMATIC TRANSMISSION - FRICTION MODIFIED, RED | |
| FLUID, AUTOMATIC TRANSMISSION - RED | |
| FLUID, AUTOMATIC TRANSMISSION FRICTION MODIFIED - RED | |
| FLUID, HYDRAULIC BRAKE \x96 DOT (280 \xb0C) ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| FLUID, TORQUE, AUTOMATIC TRANSMISSION | |
| FLUOROELASTOMER (FKM) | |
| FLUOROELASTOMER | |
| FUSE BLOCKS | |
| Fuse Connector Assemblies - Preferred Parts (Noun Code - 3660) | |
| Fuses (Noun Code - 3660) General Specifications | |
| Fuses - General Specifications (Noun Code - 3660) | |
| GASKET MATERIAL, CELLULOSE FIBER/NITRILE BUTADIENE RUBBER | |
| GASKET, CELLULOSE FIBER - MINERAL/NITRILE BUTADIENE RUBBER - NITRILE BUTADIENE ENCAPSULATED OVER STYRENE BUTADIENE ENCAPSULATION - TEFLON COATED FOR RELEASE ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| GASKET, CELLULOSE FIBER - MINERAL/NITRILE RUBBER | |
| GASKET, CELLULOSE FIBER/ STYRENE BUTADIENE RUBBER - ENCAPSULATED | |
| GASKET, CELLULOSE FIBER/NITRILE BUTADIENE RUBBER - CHLOROPRENE RUBBER ENCAPSULATED - TEFLON COATED FOR RELEASE | |
| GASKET, CORK - ETHYLENE ACRYLIC BINDER - LARGE GRANULE | |
| GASKET, CORK - ETHYLENE ACRYLIC BINDER - SMALL GRANULE ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| GASKET, PAPER/BEATER MIX NITRILE BUTADIENE RUBBER | |
| GASKET, PAPER/NEOPRENE | |
| GASKET, VULCANIZED FIBER BASE/NITRILE BUTADIENE RUBBER COATED | |
| GASOLINE, UNLEADED, INITIAL FILL ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| GREASE, AIR PUMP BALL BEARING | |
| GREASE, CALCIUM COMPLEX - LONG LIFE LUBRICATION, CONSTANT VELOCITY JOINT | |
| GREASE, GENERAL PURPOSE BODY | |
| GREASE, INORGANIC, HIGH MELTING POINT - NLGI #2 | |
| GREASE, LITHIUM COMPLEX - LONG LIFE LUBRICATION - MOLYBDENUM DISULFIDE ADDITIVE - CONSTANT VELOCITY JOINT ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| GREASE, LITHIUM COMPLEX - LONG LIFE LUBRICATION - MOLYBDENUM DISULFIDE ADDITIVE, CONSTANT VELOCITY JOINT | |
| GREASE, LONG LIFE LUBRICATION - HIGH TEMPERATURE RESISTANCE, CONSTANT VELOCITY JOINT | |
| GREASE, LONG LIFE LUBRICATION - MOLYBDENUM DISULFIDE ADDITIVE - CONSTANT VELOCITY JOIN | |
| GREASE, NEEDLE BEARING | |
| GREASE, NLGI GRADE 1, LIFETIME LUBRICATION | |
| GREASE, SEAL PRELUBE, MOLYBDENUM DISULFIDE ADDITIVES | |
| GREASE, SYNTHETIC - POLYESTER BASE - INORGANIC THICKENER | |
| Groove Drive Studs - General Specifications _ (Noun Code 6200) | |
| Groove Pins - (Noun Code 6200) | |
| Groove Pins - General Specifications - (Noun Code 6200) | |
| Guidelines and Requirements for Electrical Testing of Unpopulated Printed Boards | |
| H Point Measurement | |
| Hardened Dowel Pins - General Information - Metric Series | |
| Hardened Dowel Pins - General Specifications - (Noun Code 6200) | |
| Hardened Dowel Pins - General Specifications - Metric Series - (Noun Code - 6200) | |
| Hardened Dowel Pins - Non-Preferred Parts - (Noun Code 6200) | |
| Hardened Dowel Pins - Preferred Parts - (Noun Code 6200) | |
| Hardened Dowel Pins - Preferred Parts - Metric Series | |
| Headed Pins - General Information - Metric Series | |
| Headed Pins - General Specifications - Metric Series (Noun Code - 6200) | |
| Headed Pins - General Specifications Noun Code - 6200 | |
| Headed Pins - Non-Preferred Parts (Noun Code - 6200) | |
| Headed Pins - Preferred Parts (Noun Code - 6200) | |
| Headed Pins - Preferred Parts - Metric Series (Noun Code - 6200) | |
| Heavy Duty T-Bolt Clamps - General Specifications (Noun Code - 1640) | |
| Heavy Duty T-Bolt Clamps -Preferred Parts (Noun Code - 1640) | |
| Hexagon Inside Head and Square Socket Filler and Drain Plugs - Non-Preferred Parts (Noun Code - 6400) | |
| Hexagon Inside Head Filler and Drain Plugs (Noun Code 6400) Non-Preferred Parts | |
| Hexagon Outside Head Filler and Drain Plugs - Preferred Parts (Noun Code - 6400) | |
| Hi-Duty Tube Components | |
| HI-DUTY TUBE FITI INGS TEE UNION NO. 76-LB (Noun Code - 9560) | |
| Hose Clamps - Type C - General Specifications | |
| Hose Clamps - Type C - Not Recommended (Noun Code - 1640) | |
| Hose Clamps - Type F - General Specifications (Noun Code - 1640) | |
| Hose Clamps - Type F - General Specifications - Metric - Inch Series (Noun Code - 1640) | |
| Hose Clamps - Type F - Metric - Inch Series (Noun Code - 1640) - Type F - General Specifications | |
| Hose Clamps - Type F - Preferred Parts (Noun Code - 1640) | |
| HOSE, MEDIUM PRESSURE - HIGH TEMPERATURE OIL RESISTANT ONE WIRE BRAID | |
| Hydraulic 37 Degree Flared Tube Components - Non-Preferred Parts | |
| Hydraulic 37 Degree Flared Tube Components - Preferred Parts | |
| HYDRAULIC 37 Degrees FLARED TUBE ADJUSTABLE STRAIGHT THREAD 90 Degrees REDUCER ELBOWS (Noun Code - 2940) Non-Preferred Parts | |
| Hydraulic Flareless Tuve Components - Preferred Parts (Noun Code - 9560) | |
| Hydraulic Tube Fittings - General Specifications (Noun Code - 3300) | |
| IMPLEMENTING THE ELECTRICAL SAFETY PROGRAM | |
| INK PERFORMANCE, ELASTOMERIC MARKING | |
| Inverted Flared Tube Components - Preferred Parts | |
| LABEL, TRANSAXLE - PRESSURE SENSITIVE | |
| LABEL, TRANSAXLE IDENTIFICATION | |
| LAMINATE, MODIFIED BUTYL RUBBER/POLYESTER FABRIC | |
| LAMINATE, SILICONE RUBBER/POLYESTER FABRIC, INSULATOR | |
| Lamp Bulbs - Preferred Parts (Noun Code - 4960) | |
| Lamp Bulbs and Sealed Beam Units - Cross Reference (Noun Code - 4960) | |
| Lamps Bulbs and Sealed Beam Headlamps - General Specifications (Noun Code - 4960) | |
| LEATHER, GENUINE - AUTOMOTIVE TYPE | |
| LUBRICANT, HYPOID GEAR - MULTI-PURPOSE - SAE 90 | |
| LUBRICANT, HYPOID GEAR - SAE 90 - SULFUR PHOSPHORUS - 10% ADDITIVE | |
| LUBRICANT, HYPOID GEAR - SAE 90 SULFUR PHOSPHORUS 6.5% ADDITIVE | |
| LUBRICANT, SAE 90, HYPOID GEAR | |
| LUBRICANT, SILICONE, GENERAL PURPOSE | |
| Lubrication Fittings - General Specfications (Noun Code - 3300) | |
| Lubrication Fittings - Non-Preferred Parts (Noun Code - 3300) | |
| Lubrication Fittings - Preferred Parts (Noun Code - 3300) | |
| MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT PIGMENT, BLACK ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| MAKEUP FEED, WATERBORNE CATIONIC ELECTROCOAT, 20 MICROMETRE FILM BUILD, RESIN ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| MARKING COMPOUND, SPRAYABLE TI02 (ANATASE) , PIGMENTED, NON- ABRASIVE | |
| MATERIAL AND PERFORMANCE REQUIREMENTS FOR PREVAILING TORQUE NUTS *** TO BE USED WITH FORD WSS-M99P1111-A*** | |
| MATERIAL AND PERFORMANCE REQUIREMENTS FOR STEEL BOLTS, STUDS, MACHINE SCREWS, AND SEMS ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Metal Balls - General Specifications(Noun Code - 0460) | |
| Metal Balls - General Specifications- Metric Series (Noun Code - 0460) | |
| Metal Balls - Preferred Parts (Noun Code - 0460) | |
| Metal Balls - Preferred Parts - Metric Series (Noun Code - 0460) | |
| METAL BALLS METRIC SERIES (Noun Code - 0460) GENERAL SPECIFICATIONS | |
| Network Aspects (NA); General Aspects of Quality of Service (QoS) and Network Performance (NP) | |
| NITRILE BUTADIENE RUBBER, CONTROLLED SWELL - OIL SEAL | |
| NITRILE BUTADIENE RUBBER, HIGH HEAT RESISTANT, OIL SEALS | |
| NITRILE BUTADIENE RUBBER, LOW TEMPERATURE RESISTANT, OIL SEAL | |
| NITRILE BUTADIENE RUBBER, OIL SEAL - AUTOMATIC TRANSMISSION - HIGH SWELLING HIGH - TEMPERATURE SERVICE | |
| NYLON (TYPE 6), 35% GLASS FIBER REINFORCED - HEAT STABILIZED | |
| NYLON (TYPE 6/6), MONOFILAMENT THREAD | |
| O-Rings (Noun Code - 7175) O-Rings for Adjustable Straight Thread Fittings Typical Fitting Installation Using Metal Washer | |
| O-Rings - General Information - Metric Series (Noun Code - 7175) | |
| O-Rings - General Specifications (Noun Code - 7175) | |
| O-Rings - General Specifications - Metric Series (Noun Code - 7175) | |
| O-Rings - Preferred Parts (Noun Code - 7175) | |
| O-Rings - Preferred Parts - Metric Series (Noun Code - 7175) | |
| O-Rings for Adjustable Straight Thread Fittings - Preferred Parts (Noun Code - 7175) | |
| OIL - ENGINE, ENERGY CONSERVING, EXCEEDING API SERVICE CATEGORY "SF" SERVICE FILL | |
| Oil Cups - General Specifications (Noun Code - 2420) | |
| OIL FRICTION MODIFIER, HYPOID GEAR, LUBRICANT ADDITIVE | |
| OIL SEAL, NITRILE BUTADIENE RUBBER, AUTOMOTIVE TRANSMISSION, HIGH TEMPRETURE | |
| OIL SEAL, SILICONE RUBBER - INCREASED TEAR STRENGTH - IMPROVED REVERSION RESISTANCE | |
| OIL, ENGINE - API SERVICE CATEGORIES "SF/CD" - SERVICE FILL ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| OIL, ENGINE - API SERVICE CATEGORY - "SF/CC" | |
| OIL, ENGINE - HIGH PERFORMANCE/RACING | |
| OIL, RUBBER PROCESSING AID | |
| Open Clamps - Preferred Parts - Metric - Inch Series (Noun Code - 1640) | |
| PADS, BUFFING AND POLISHING | |
| PAINT PERFORMANCE, AIR DRY, EXTERIOR - SERVICE REFINISH TOUCH-UP | |
| PAINT PERFORMANCE, STYRENEACRYLONITRILE (S/A) + EPDM BLEND - LAMINATED BODY PARTS | |
| PAINT QUALITY, AIR DRY, INTERIOR REPAIR | |
| PAINT QUALITY, EXTERIOR TEXTURED AND NON-TEXTURED - LOW GLOSS AIR DRY | |
| PAINT QUALITY, ROUGH CASTINGS | |
| PAINT, INTERIOR TRIM, RECOLOR | |
| PAINT, PRIMER, AIR DRY - POLYPROPYLENE INTERIOR | |
| PAPER, BOGUS KRAFT LINER/ CORRUGATED LAMINATE | |
| PAPER, JUTE | |
| PETROLATUM, NLGI NO. 5 GRADE | |
| PHENOLIC COMPRESSION MOLDING COMPOUND | |
| PHENOLIC IMPREGNATED FELT MAT, CROSS LAMINATED | |
| PHENOLIC MOLDING COMPOUND, MINERAL FILLED | |
| PHOSPHATE AND LUBRICANT FINISH - S2 | |
| PHOSPHATE COATING, TIN MODIFIED IRON OR STEEL | |
| Pipe and Street Elbows - Non-Preferred Parts (Noun Code - 2940) | |
| Pipe and Street Elbows - Preferred Parts (Noun Code - 2940) | |
| Pipe Caps and Locknuts - Non-Preferred Parts (Noun Code - 1380) | |
| Pipe Caps and Locknuts - Preferred Parts (Noun Code - 1380) | |
| Pipe Couplings (Noun Code - 2220) | |
| Pipe Couplings and Reducing Pipe Couplings Non-Preferred Parts (Noun Code - 2220) | |
| Pipe Couplings and Reducing Pipe Couplings Preferred Parts (Noun Code - 2220) | |
| Pipe Crosses - Non-Preferred Parts (Noun Code - 2390) | |
| Pipe Crosses - Preferred Parts (Noun Code - 2390) | |
| Pipe Fittings - General Specifications | |
| Pipe Nipples - General Specifications (Noun Code - 5760) | |
| Pipe Nipples - Non-Preferred Parts (Noun Code - 5760) | |
| Pipe Nipples - Preferred Parts (Noun Code - 5760) | |
| Pipe Tees - Non-Preferred Parts (Noun Code - 9020) | |
| Pipe Tees - Preferred Parts (Noun Code - 9020) | |
| PLATING, ELECTROLESS NICKEL | |
| PLATING, LEAD - TIN ALLOY | |
| PLATING, ZINC AND CHROMATE - S36 | |
| POLYACRYLATE RUBBER, HIGH TEMPERATURE, OIL SEAL | |
| POLYACRYLIC RUBBER, HIGH TEMPERATURE, OIL SEAL | |
| POLYESTER-ELASTOMERI C MOLDING COMPOUND ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| POLYURETHANE MOLDING COMPOUND, MODIFIED - POLYETHER BASED ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| POLYURETHANE MOLDING COMPOUND, MODIFIED- POLYETHER BASED | |
| POLYVINYL CHLORIDE, OPAQUE FLOOR MAT | |
| POWDERED METAL, MODIFIED AISI 4600 STEEL | |
| Preface Area Standard Parts | |
| PRIMER QUALITY, TRUCK CHASSIS | |
| PRIMER, FOR ANAEROBIC ADHESIVES | |
| PRIMER, WATERBORNE CATIONIC ELECTROCOAT - 20 MICROMETRE FILM BUILD, INITIAL FILL, BLACK, LOW SOLIDS TYPE ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Rectangular Sealed Beam Headlamps - General Information | |
| Rectangular Sealed Beam Headlamps - Preferred Parts (Noun Code - 4960) | |
| Rectangular Section Seal Rings - General Specifications (Noun Code - 7175) | |
| Rectangular Section Seal Rings - Preferred Parts (Noun Code - 7175) | |
| Rectangular Uniform Section Retaining Rings - General Specifications (Noun Code - 7175) | |
| Rectangular Uniform Section Retaining Rings - Preferred Parts (Noun Code - 7175) | |
| Reducing Pipe Adapters - General Specifications (Noun Code - 0030) | |
| Reducing Pipe Adapters - Non-Preferred Parts (Noun Code - 0030) | |
| Reducing Pipe Adapters - Preferred Parts (Noun Code - 0030) | |
| Reducing Pipe Tees | |
| REINFORCED THERMOSET, PLASTIC | |
| Retainer Spring Pins (Noun Code - 6200) | |
| Retainer Spring Pins - General Specifications (Noun Code 6200) | |
| Retainer Spring Pins - General Specifications - Metric Series (Noun Code - 6200) | |
| Retainer Spring Pins - Preferred Parts (Noun Code 6200) | |
| Retaining Rings - General Specifications(Noun Code - 7175) | |
| Retaining Rings/Vendor Series Location and Cross Reference (Noun Code - 7175) | |
| Rim Valves - General Specifications and Part Numbers (Noun Code - 9620) | |
| Rod End Clevises and Eyes - General Specifications - (Noun Code - 9940) | |
| Rod End Clevises and Eyes - General Specifications - Metric Series (Noun Code - 9940) | |
| Rod End Clevises and Eyes - Preferred Parts - Metric Series - (Noun Code - 9940) | |
| Rod End Clevises and Eyes - Preferred Parts | |
| Round (Snap) Head Solid Rivets - Metric Series - General Information - (Noun Code - 7220) | |
| Round (Snap) Head Solid Rivets - Preferred Parts Metric Series | |
| Round (Snap) Head Solid Rivets Metric Series - Non-Preferred Parts | |
| Round Sealed Beam Headlamps - Preferred Parts (Noun Code - 4960) | |
| Rubber Grommets (Noun Code - 4020) | |
| Rubber Grommets - General Specifications (Noun Code - 4020) | |
| Rubber Grommets - Preferred Parts (Noun Code - 4020) | |
| RUBBER, NEOPRENE LATEX - COATING ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| RUBBER, SILICONE - BOOT | |
| SCREEN, POLYESTER | |
| Sealed Beam Headlamp - General Specifications | |
| SEALER, ENGINE AND CHASSIS | |
| SEALER, GENERAL PURPOSE | |
| SEALER, RUBBER BASE-FOR RADIAL OIL SEALS | |
| SEALING COMPOUND - PIPE | |
| Shock Absorber and Strut Testing | |
| Short Adjustable Rod End Clevises - Non-Preferred Parts (Noun Code - 9940) | |
| Shut-Off Cocks - Preferred Parts (Noun Code - 9620) | |
| Single and Double Flares - General Specifications | |
| Sinker Nails - General Specifications and Part Numbers (Noun Code - 3160) | |
| SINTERED IRON - STRUCTURAL, (NICKEL- COPPER ADDED 1%) | |
| Slotted Headless Pipe Plugs - General Specifications (Noun Code - 6400) | |
| Slotted Spring Pins - General Specifications (Noun Code - 6200) | |
| Slotted Spring Pins - Non Preferred Parts (Noun Code -6200) | |
| Slotted Spring Pins - Non-Preferred Parts - Metric Series (Noun Code - 6200) | |
| SOAP, TIRE MOUNTING - LUBRICANT -, SERVICE | |
| SOLVENT AND PENETRATING FLUID ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| Special Retaining Rings - Non-Preferred Parts (Noun Code - 7175) | |
| Spherical Sleeve (Compression) Tube Fittings - General Specifications (Noun Code - 3300) | |
| Spherical Sleeve Components - Preferred Parts | |
| Spherical Sleeve Components \x96 Preferred Parts | |
| Spiral Retaining Rings - General Specifications (Noun Code - 7175) | |
| Spiral Retaining Rings - Preferred Parts (Noun Code - 7175) | |
| Spiral Retaining Rings, Heavy Duty Internal Series RRT - Non-Preferred Parts (Noun Code - 7175) | |
| Spiral Retaining Rings, Heavy Duty, External Series RST - Non-Preferred Parts (Noun Code - 7175) | |
| Spiral Retaining Rings, Medium Duty External, Series RS - Non-Preferred Parts (Noun Code - 7175) | |
| Spiral Retaining Rings, Medium Duty Internal, Series RR - Non-Preferred Parts (Noun Code - 7175) | |
| Split (Cotter) Pins - Extended Prong - General Specifications - (Noun Code 6200) | |
| Split (Cotter) Pins - Extended Prong - General Specifications Metric Series - (Nound Code - 6200) | |
| Split (Cotter) Pins - Extended Prong - Metric Series General Information | |
| Split (Cotter) Pins - Extended Prong - Non-Preferred Parts - Metric Series | |
| Split (Cotter) Pins - Extended Prong - Non-Preferred Parts | |
| Split (Cotter) Pins - Extended Prong - Preferred Parts Metric Series | |
| Split (Cotter) Pins - Extended Prong - Preferred Parts | |
| SPOT REMOVER | |
| Spring Hinge Lid Oil Cups - Preferred Parts (Noun Code - 2420) | |
| Spring Pins - General Information - Metric Series | |
| Spring Pins - General Specifications - (Noun Code - 6200) | |
| Spring Pins - General Specifications - Metric Series (Noun Code - 6200) | |
| Spring Wire Hose Clamps - Type E - General Specifications | |
| Spring Wire Hose Clamps - Type E General Specifications | |
| Square and Rectangular Parallel (Feather) Keys - General Information - Metric Series | |
| Square and Rectangular Parallel (Feather) Keys - General Specifications - Metric Series - (Noun Code - 4820) | |
| Square and Rectangular Parallel (Feather) Keys - Preferred Parts - Metric Series (Noun Code - 4820) | |
| Square and Rectangular Parallel (Feather) Keys Metric Series - (Noun Code - 4820) | |
| Square End Straight Pins - General Specification - (Noun Code 6200) | |
| Square End Straight Pins - Not Recommended - (Noun Code 6200) | |
| Square Gib Head Tapered Keys - General Specifications (Noun Code - 4820) | |
| Square Gib Head Tapered Keys - Non-Preferred Parts (Noun Code - 4820) | |
| Square Gib Head Tapered Keys - Preferred Parts (Noun Code - 4820) | |
| Square Parallel Keys - General Specifications (Noun Code - 4820) | |
| Square Parallel Keys - Non-Preferred Parts (Noun Code -4820) | |
| Square Parallel Keys - Preferred Parts - (Noun Code -4820) | |
| Square Tapered Keys - Non-Preferred Parts (Noun Code - 4820) | |
| Square Tapered Keys - Preferred Parts (Noun Code - 4820) | |
| Standard for Uniformly Measuring and Expressing the Performance of Electrical Energy Storage Systems | |
| STARTING FLUID, AUTOMOTIVE ENGINE LOW TEMPERATURE | |
| STEEL BALLS, CHROME ALLOY, VACUUM PROCESSED | |
| STEEL WIRE MUSIC SPRING - TINNED FINISH ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| STEEL WIRE, CHROME SILICON SPRING | |
| STEEL WIRE, MUSIC SPRING- WHITE LIQUOR FINISH | |
| STEEL WIRE, MUSIC SPRING- ZINC OR CADMIUM FINISH | |
| STEEL WIRE, OIL TEMPERED SPRING - ROUND OR FLAT - BLACK OXIDE FINISH | |
| STEEL WIRE, OIL TEMPERED SPRING, ROUND OR FLAT, PLAIN OIL DIPPED ***TO BE USED WITH FORD WSS-M99P1111-A*** | |
| STEEL, 110,000 PSI (758 MPA) YIELD STRENGTH - HEAT TREATABLE | |
| STEEL, 130000 PSI (896 MPA) YIELD STRENGTH - SAE 4140 | |
| STEEL, 32000 PSI (221 MPA) YIELD STRENGTH | |
| STEEL, 36,000 PSI (248 MPA) YIELD STRENGTH | |
| STEEL, BOLTS LOW CARBON | |
| STEEL, BOLTS MEDIUM CARBON ALLOY, QUENCHED AND TEMPERED | |
| STEEL, BORON LOW CARBON | |
| Steering Gear Abuse Test | |
| Steering Gear Impact Test | |
| Straight Thread O-Ring Boss Plugs | |
| Straight Thread O-Ring Bosses - General Specifications | |
| Straps (Noun Code \x96 8630) Metric Series - Preferred Parts | |
| Straps - General Specifications - Metric Series | |
| Straps \x96 General Specifications \x96 Metric Series | |
| Table of Contents - Miscellaneous - Metric Series | |
| Table of Contents - Miscellaneous | |
| Table of Contents - Section J - Pins, Plugs and Keys | |
| Table of Contents - Section JM - Pins, Plugs and Keys - Metric Series | |
| Table of Contents - Section K - Clips and Clamps | |
| Table of Contents - Section KM - Clips and Clamps Metric - Inch Series | |
| Table of Contents - Section L - Tube and Lubrication Fittings | |
| Table of Contents - Section M - Pipe Fittings | |
| Table of Contents - Section N - Balls, Retaining Rings and Bearing Locknuts and Washers | |
| Table of Contents - Section NM - Balls, Retaining Rings and Bearing Locknuts and Washers - Metric Series | |
| Table of Contents - Section R - Electrical Parts | |
| Table of Contents - Section S - Seals | |
| Table of Contents - Section SM - Seals - Metric Series | |
| Taper Pins - Not Recommended - (Noun Code 6200) | |
| Tapered and Reduced Cross Section (Circlip) Retaining Rings - Metric Series (Noun Code - 7175) | |
| Tapered and Reduced Cross Section (Circlip) Retaining Rings - Preferred Parts - Metric Series (Noun Code - 7175) | |
| Tapered and Reduced Cross Section Retaining Rings - Non-Preferred Parts (Noun Code - 7175) | |
| Tapered and Reduced Cross Section Retaining Rings - Preferred Parts (Noun Code - 7175) | |
| TERMINAL BLOCKS | |
| THERMOCOUPLE WIRE, NEGATIVE - EXTENSION | |
| THERMOCOUPLE WIRE, POSITIVE - EXTENSION | |
| Threaded Sleeve Components | |
| Tyes N and AN Bearing Lock Nuts - Preferred Parts (Noun Code - 5780) | |
| Type W and TW Bearing Lock Washers - General Specifications (Noun Code - 9720) | |
| Type W and TW Bearing Lock Washers - Preferred Parts (Noun Code - 9720) | |
| Type W Bearing Lock Washers (Noun Code - 9720) | |
| Types TN and TAN Bearing Lock Nuts - Preferred Parts (Noun Code - 5780) | |
| UNDERBODY COATING, ASPHALT FILLED | |
| Unhardened Dowel Pins - General Specifications - (Noun Code 6200) | |
| Unhardened Dowel Pins - Non-Preferred Parts - (Noun Code 6200) | |
| Uniform Cross Section Rectangular Retaining Rings - General Specifications - Metric Series (Noun Code - 7175) | |
| Uniform Cross Section Rectangular Retaining Rings - Preferred Parts - Metric Series (Noun Code - 7175) | |
| Uniform Cross Section Spiral Retaining Rings - General Specifications - Metric Series (Noun Code - 7175) | |
| Uniform Cross Section Spiral Retaining Rings - Preferred Parts - Metric Series (Noun Code - 7175) | |
| VOID - Area Standard Parts | |
| VOID - Cup Plugs - Preferred Parts (Noun Code - 6400) | |
| VOID - Groove Pins \x96 English Series Not Recommended (Noun Code 6200) | |
| VOID - Hardened Dowel Pins - Preferred Parts \x96 Metric Series | |
| VOID - Headed Pins - Conversion List | |
| VOID - Lamps Bulbs and Sealed Beam Headlamps \x96 General Specifications (Noun Code \x96 4960) | |
| VOID - Straight Thread O-Ring Boss Plugs \x96 English Series - (Noun Code 6400) | |
| VOID - Worm Drive Hose Clampswith Bandof Modified Profile Specifications and Parts List(Noun Code 1640) | |
| Woodruff Keys - General Specification (Noun Code - 4820) | |
| Woodruff Keys - Preferred Parts (Noun Code - 4820) | |
| Worm Drive Hose Clamps with Band of Modified Profile Specifications and Parts List (Noun Code 1640) |
| << Prev | Next >> |