Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
50
56
57
58
59
60
61
62
63
64
65
66
67
68
70
80
90
100
110
120
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| Aiguilles hypodermiques non r\xe9utilisables - Code de couleurs pour l'identification RECTIFICATIF TECHNIQUE 1 | |
| Aiguilles hypodermiques non r\xe9utilisables - Code de couleurs pour l\x92identification | |
| ALTERNATING CURRENT DISCONNECTORS (ISOLATORS) AND EARTHING SWITCHES | |
| Aluminium-Magnesium- Silicon Alloy Wire for Overhead Line Conductors | |
| Amendement 1 Electrical Installations in Ships Part 505: Special Features - Mobile Offshore Drilling Units | |
| Amendment 1 - Electrical Installations in Ships - Part 202: System Design - Protection | |
| Amendment 1 Double-capped fluorescent lamps \x96 Performance specifications | |
| Amendment 1 Electrical Apparatus for Explosive Gas Atmospheres Part 4: Method of Test for Ignition Temperature | |
| Amendment 1 Electrical apparatus for explosive gas atmospheres Part 7: Increased safety "e" | |
| Amendment 1 Electrical installations in ships - Part 304: Equipment - Semiconductor convertors | |
| Amendment 1 Electrical installations in ships - Part 353: Single and multicore non-radial field power cables with extruded solid insulation for rated voltages 1 kV and 3 kV | |
| Amendment 1 Electrical Installations in Ships - Part 401: Installation and Test of Completed Installation | |
| Amendment 1 Electrical installations in ships \x96 Part 303: Equipment \x96 Transformers for power and lighting | |
| Amendment 1 Electrical installations in ships \x97 Part 101: Definitions and general requirements | |
| Amendment 1 Electrical installations in ships Part 301: Equipment - Generators and motors | |
| Amendment 1 Electrical installations in ships Part 305: Equipment - Accumulator (storage) batteries | |
| Amendment 1 Electrical Installations in Ships Part 3: Cables (Construction, Testing and Installations) | |
| AMENDMENT 1 Electroacoustics \x96 Hearing aids \x96 Part 4: Induction-loop systems for hearing aid purposes \x96 System performance requirements | |
| Amendment 1 Explosive atmospheres - Part 25: Intrinsically safe electrical systems | |
| AMENDMENT 1 Explosive atmospheres \x96 Part 29-1: Gas detectors \x96 Performance requirements of detectors for flammable gases | |
| AMENDMENT 1 Explosive atmospheres \x96 Part 5: Equipment protection by powder filling "q" | |
| AMENDMENT 1 Explosive atmospheres \x96 Part 6: Equipment protection by liquid immersion "o" | |
| Amendment 1 Fixed resistors for use in electronic equipment Part 6: Sectional specification: Fixed resistor networks with individually measurable resistors | |
| Amendment 1 Fixed Resistors for Use in Electronic Equipment Part 8: Sectional Specification: Fixed Chip Resistors | |
| Amendment 1 Magnetic Tape Sound Recording and Reproducing Systems - Part 7: Cassette for Commercial Tape Records and Domestic Use | |
| AMENDMENT 1 Method for the determination of the proof and the comparative tracking indices of solid insulating materials | |
| AMENDMENT 1 Miniature fuses \x96 Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| AMENDMENT 1 Miniature fuses \x96 Part 2: Cartridge fuse-links | |
| AMENDMENT 1 Miniature fuses \x96 Part 3: Sub-miniature fuse-links | |
| AMENDMENT 1 Miniature fuses \x96 Part 8: Fuse resistors with particular overcurrent protection | |
| Amendment 1 PRIMARY CELLS AND BATTERIES Part 1 : General | |
| AMENDMENT 1 Quartz crystal units of assessed quality \x96 Part 1: Generic specification | |
| AMENDMENT 1 Radio frequency cables \x96 Part 0-1: Guidelines to the design of detail specifications \x96 Coaxial cables | |
| Amendment 1 Radio-Frequency Cables Part 2: Relevant Cable Specifications | |
| AMENDMENT 1 Series capacitors for power systems \x96 Part 1: General | |
| AMENDMENT 1 Series capacitors for power systems \x96 Part 2: Protective equipment for series capacitor banks | |
| Amendment 1 Test on oil-filled and gas-pressure cables and their accessories Part 4: Oil-impregnated paper-insulated high pressure oil-filled pipe-type cables and accessories for alternating voltages up to and including 400... | |
| Amendment 1 Tests on oil-filled and gas-pressure cables and their accessories Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV | |
| Amendment 1 Tests on oil-filled and gas-pressure cables and their accessories Part 2: Internal gas-pressure cables and accessories for alternating voltages up to 275 kV | |
| Amendment 1 Tests on oil-filled and gas-pressure cables and their accessories Part 3: External gas-pressure (gas compression) cables and accessories for alternating voltages up to 275 kV | |
| Amendment 2 Double-capped fluorescent lamps \x96 Performance specifications | |
| Amendment 2 Electrical installations in ships - Part 301: Equipment - Generators and motors | |
| Amendment 2 Electrical Installations in Ships Part 3: Cables (Construction, Testing and Installations) | |
| AMENDMENT 2 Miniature fuses \x96 Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| AMENDMENT 2 Miniature fuses \x96 Part 2: Cartridge fuse-links | |
| Amendment 2 PRIMARY CELLS AND BATTERIES Part 1 : General | |
| AMENDMENT 2 Surge arresters \x96 Part 4: Metal-oxide surge arresters without gaps for a.c. systems | |
| Amendment 2 Tests on oil-filled and gas-pressure cables and their accessories Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV | |
| Amendment 3 Double-capped fluorescent lamps \x96 Performance specifications | |
| Amendment 3 Electrical Installations in Ships Part 3: Cables [Construction, Testing and Installations] | |
| AMENDMENT 4 Double-capped fluorescent lamps \x96 Performance specifications | |
| Amendment 4 Electrical Installations in Ships Part 3: Cables [Construction, Testing and Installations] | |
| AMENDMENT 5 Double-capped fluorescent lamps \x96 Performance specifications | |
| Amendment 5 Electrical Installations in Ships Part 3. Cables [Construction, Testing and Installations] | |
| AMENDMENT 6 Double-Capped Fluorescent Lamps - Performance Specifications | |
| Amendment 6 Electrical Installations in Ships Part 3: Cables [Construction, Testing and Installations] | |
| Amendment No 1 Recommendations for Ballasts for Fluorescent Lamps | |
| Analogue Audio Disk Records and Reproducing Equipment | |
| Automotive Applications Addendum to IPC-6012D Qualification and Performance Specification for Rigid Printed Boards | |
| Automotive Applications Addendum to IPC-6012E Qualification and Performance Specification for Rigid Printed Boards | |
| Connectors for frequencies below 3 MHz (Mc/s) Part 3: Battery connectors corrigendum | |
| Connectors for Frequencies Below 3 MHz (Mc/s) Part 3: Battery Connectors | |
| Connectors for Frequencies Below 3 MHz (Mc/s) Part 5: Rectangular Multipole Connectors with Blade Contacts | |
| Connectors for Frequencies Below 3 MHz (Mc/s) Part 6: Rectangular Miniature Multipole Connectors with Blade Contacts | |
| Connectors for Frequencies Below 3 MHz - Part 17: Detail Specification for Interconnection Devices Which Prmit Multi-Directional Mating, for Use with Rechargeble Batteries | |
| Connectors for Frequencies Below 3 MHz Part 0: Guide to Drawing Information in Detail Specifications | |
| Connectors for Frequencies Below 3 MHz Part 10: Connectors for Coupling an External Low-Voltage Power Supply to Portable Entertainment Equipment | |
| Connectors for Frequencies Below 3 MHz Part 11: Edge Socket Connectors with Closed Ends and Having a Contact Spacing of 2.54 mm (0.1 in) Mating Either with Board Mounted Connectors... | |
| Connectors for Frequencies Below 3 MHz Part 12: Link and Test Connectors | |
| Connectors for Frequencies Below 3 MHz Part 15: Ultra-Miniature Board-Mounted Printed-Wiring Connectors Having Staggered Contact Spacing of 1.27 mm (0.05 in) | |
| Connectors for Frequencies Below 3 MHz Part 16: Printed Circuit Board Mounted Connectors with Two Rows of Staggered Contacts and Terminations with Spacing of 2.54 mm (0.1 in) | |
| Connectors for Frequencies Below 3 MHz Part 1: General Requirements and Measuring Methods | |
| Connectors for Frequencies Below 3 MHz Part 2: Connectors for Radio Receivers and Associated Sound Equipment | |
| Connectors for Frequencies Below 3 MHz Part 4: Circular Multipole Connectors with Threaded Coupling | |
| Connectors for Frequencies Below 3 MHz Part 7: Circular Multipole Connectors with Bayonet or Push-Pull Coupling | |
| Connectors for Frequencies Below 3 MHz Part 8: Concentric Connectors for Audio Circuits in Radio Receivers | |
| Connectors for Frequencies Below 3 MHz Part 9: Circular Connectors for Radio and Associated Sound Equipment | |
| CORRIGENDUM 1 Explosive atmospheres \x96 Part 26:Equipment with equipment protection level (EPL) Ga | |
| CORRIGENDUM 1 Explosive atmospheres \x96 Part 31: Equipment dust ignition protection by enclosure \x93t\x94 | |
| Degrees of protection of enclosures for low-voltage switchgear and controlgear | |
| Dimensions of Ball and Socket Couplings of String Insulator Units | |
| Dimensions of Brushes and Brush-Holders for Electrical Machinery | |
| Dimensions of Plugs for Hearing Aids | |
| Dimensions of Pot-Cores Made of Magnetic Oxides and Associated Parts | |
| DOUBLE-CAPPED FLUORESCENT LAMPS - PERFORMANCE SPECIFICATIONS | |
| Electric Installations in Ships - Part 506: Special Features - Ships Carrying Specific Dangerous Goods and Materials Hazardous Only in Bulk | |
| ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES - PART 4: METHOD OF TEST FOR IGNITION TEMPERATURE | |
| ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES \x96 Part 25: Intrinsically safe electrical systems | |
| Electrical Apparatus for Explosive Gas Atmospheres Part 3: Spark-Test Apparatus for Intrinsically-Safe Circuits | |
| Electrical Apparatus for Explosive Gas Atmospheres Part 9: Marking | |
| Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection - Powder Filling "q" | |
| Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection Increased Safety "e" | |
| Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations Type of Protection Oil Immersion "o" | |
| Electrical Installations in Ships - Part 201: System Design - General | |
| ELECTRICAL INSTALLATIONS IN SHIPS - PART 202: SYSTEM DESIGN - PROTECTION | |
| Electrical installations in ships - Part 302-2: Low voltage switchgear and controlgear assemblies - Marine power | |
| ELECTRICAL INSTALLATIONS IN SHIPS - PART 302: LOW - VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES | |
| ELECTRICAL INSTALLATIONS IN SHIPS - PART 350: GENERAL CONSTRUCTION AND TEST METHODS OF POWER, CONTROL AND INSTRUMENTATION CABLES FOR SHIPBOARD AND OFFSHORE APPLICATIONS | |
| ELECTRICAL INSTALLATIONS IN SHIPS - PART 352: CHOICE AND INSTALLATION OF ELECTRICAL CABLES | |
| Electrical installations in ships - Part 352: Selection, installation, and operating conditions of cables | |
| Electrical Installations in Ships - Part 353: Single and Multicore Non-Radial Field Power Cables with Extruded Solid Insulation for Rated Voltages 1 kV and 3 kV | |
| Electrical Installations in Ships - Part 354: Single- and Three-Core Power Cables with Extruded Solid Insulation for Rated Voltages 6 kV, 10 kV and 15 kV | |
| ELECTRICAL INSTALLATIONS IN SHIPS - PART 359: SHEATING MATERIALS FOR SHIPBOARD POWER AND TELECOMMUNICATION CABLES ** W/D S/S BY IEC 60092-360 ** | |
| Electrical Installations in Ships - Part 374: Shipboard Telecommunication Cables and Radio-Frequency Cables - Telephone Cables for Non-Essential Communication Services | |
| Electrical Installations in Ships - Part 375: Shipboard Telecommunication Cables and Radio-Frequency Cables - General Instrumentation, Control and Communication Cables | |
| Electrical Installations in Ships - Part 502: Tankers - Special Features | |
| Electrical Installations in Ships - Part 503: Special Features A.C. Supply Systems with Voltages in the Range Above 1 kV up to and Including 11 kV | |
| ELECTRICAL INSTALLATIONS IN SHIPS - PART 504: AUTOMATION, CONTROL AND INSTRUMENTATION | |
| Electrical Installations in Ships - Part 507; Pleasure Craft | |
| Electrical installations in ships \x96 Part 202: System design \x96 Protection | |
| Electrical installations in ships \x96 Part 302-2: Low voltage switchgear and controlgear assemblies \x96 Marine power | |
| Electrical installations in ships \x96 Part 306: Equipment \x96 Luminaires and lighting accessories | |
| ELECTRICAL INSTALLATIONS IN SHIPS \x96 Part 350: General construction and test methods of power, control and instrumentation cables for shipboard and offshore applications | |
| Electrical installations in ships \x96 Part 353: Power cables for rated voltages 1 kV and 3 kV | |
| Electrical installations in ships \x96 Part 354: Single- and three-core power cables with extruded solid insulation for rated voltages 6 kV (Um = 7,2 kV) up to 30 kV (Um... | |
| Electrical installations in ships \x96 Part 360: Insulating and sheathing materials for shipboard and offshore units, power, control, instrumentation and telecommunication cables | |
| Electrical installations in ships \x96 Part 376: Cables for control and instrumentation circuits 150/250 V (300 V) | |
| Electrical installations in ships \x96 Part 378: Optical fiber cables | |
| Electrical installations in ships \x96 Part 379: Symmetrical category cables with transmission characteristics up to 1 000 MHz | |
| Electrical installations in ships \x96 Part 504: Automation, control and instrumentation | |
| Electrical installations in ships \x96 Part 504: Special features \x96 Control and instrumentation CORRIGENDUM 1 | |
| Electrical installations in ships \x96 Part 509: Operation of electrical installations | |
| Electrical installations in ships \x97 Part 101: Definitions and general requirements | |
| Electrical Installations in Ships Part 203: System Design - Acoustic and Optical Signals | |
| Electrical Installations in Ships Part 204: System Design - Electric and Electrohydraulic Steering Gear | |
| Electrical Installations in Ships Part 301: Equipment - Generators and Motors | |
| Electrical Installations in Ships Part 303: Equipment - Transformers for Power and Lighting | |
| Electrical Installations in Ships Part 304: Equipment - Semiconductor Convertors | |
| Electrical Installations in Ships Part 305: Equipment - Accumulator (Storage) Batteries | |
| Electrical Installations in Ships Part 306: Equipment - Luminaires and Accessories | |
| Electrical Installations in Ships Part 307: Equipment - Heating and Cooking Appliances | |
| ELECTRICAL INSTALLATIONS IN SHIPS PART 351: INSULATING MATERIALS FOR SHIPBOARD AND OFFSHORE UNITS, POWER, CONTROL, INSTRUMENTATION, TELECOMMUNICATION AND DATA CABLES | |
| Electrical Installations in Ships Part 376: Shipboard Multicore Cables for Control Circuits | |
| Electrical installations in ships Part 3: Cables (construction, testing and installations) | |
| Electrical Installations in Ships Part 401: Installation and Test of Completed Installation | |
| Electrical Installations in Ships Part 501: Special Features - Electric Propulsion Plant | |
| Electrical Installations in Ships Part 505: Special Features - Mobile Offshore Drilling Units | |
| ELECTRICAL INSULATION - THERMAL EVALUATION AND DESIGNATION | |
| ELECTROACOUSTICS - HEARING AIDS - PART 0: MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF HEARING AIDS | |
| ELECTROACOUSTICS - HEARING AIDS - PART 7: MEASUREMENT OF THE PERFORMANCE CHARACTERISTICS OF HEARING AIDS FOR PRODUCTION, SUPPLYAND DELIVERY QUALITY ASSURANCE PURPOSES | |
| Electroacoustics \x96 Hearing aids \x96 Part 15: Methods for characterising signal processing in hearing aids with a speech-like signal | |
| Electroacoustics \x96 Hearing aids \x96 Part 16: Definition and verification of hearing aid features | |
| Electroacoustics \x96 Hearing aids \x96 Part 8: Methods of measurement of performance characteristics of hearing aids under simulated in situ working conditions | |
| Engins de terrassement - D\xe9termination de la vitesse au sol | |
| Engins de terrassement - Instruments pour l\x92entretien | |
| Engins de terrassement - Pelles hydrauliques et chargeuses-pelleteus es - M\xe9thodes de d\xe9termination des forces de l'outil | |
| EXPLOSIVE ATMOSPHERES - ALL PARTS | |
| Explosive atmospheres - Part 45: Electrical ignition systems for internal combustion engines | |
| Explosive atmospheres - Part 5: Equipment protection by powder filling \x93q\x94 | |
| EXPLOSIVE ATMOSPHERES \x96 Part 25: Intrinsically safe electrical systems | |
| Explosive atmospheres \x96 Part 26: Equipment with Equipment Protection Level (EPL) Ga | |
| Explosive atmospheres \x96 Part 28: Protection of equipment and transmission systems using optical radiation CORRIGENDUM 1 | |
| Explosive atmospheres \x96 Part 28: Protection of equipment and transmission systems using optical radiation | |
| EXPLOSIVE ATMOSPHERES \x96 Part 29-1: Gas detectors \x96 Performance requirements of detectors for flammable gases | |
| Explosive atmospheres \x96 Part 29-2: Gas detectors \x96 Selection, installation, use and maintenance of detectors for flammable gases and oxygen | |
| Explosive atmospheres \x96 Part 29-3: Gas detectors \x96 Guidance on functional safety of fixed gas detection systems | |
| Explosive atmospheres \x96 Part 29-4: Gas detectors \x96 Performance requirements of open path detectors for flammable gases CORRIGENDUM 1 | |
| Explosive atmospheres \x96 Part 2: Equipment protection by pressurized enclosure "p" | |
| Explosive atmospheres \x96 Part 30-2: Electrical resistance trace heating \x96 Application guide for design, installation and maintenance | |
| Explosive atmospheres \x96 Part 31: Equipment dust ignition protection by enclosure "t" | |
| Explosive atmospheres \x96 Part 32-2: Electrostatics hazards \x96 Tests | |
| Explosive atmospheres \x96 Part 35-1: Caplights for use in mines susceptible to firedamp \x96 General requirements \x96 Construction and testing in relation to the risk of explosion | |
| Explosive atmospheres \x96 Part 35\x962: Caplights for use in mines susceptible to firedamp \x96 Performance and other safety-related matters | |
| EXPLOSIVE ATMOSPHERES \x96 Part 7: Equipment protection by increased safety 'e' | |
| Fieldbus Intrinsically Safe Concept (FISCO) and Fieldbus Non-Incendive Concept (FNICO) | |
| First Supplement to Publication 60079-4 [1966] Electrical apparatus for explosive gas atmospheres Part 4: Method of test for ignition temperature | |
| First supplement to Publication 60117-13 {1969} Recommended graphical symbols Part 13: Block symbols for transmission and miscellaneous applications | |
| First supplement to Publication 60130-4 (1966) Connectors for frequencies below 3 MHz Part 4: Circular multipole connectors with threaded coupling | |
| Fixed Capacitors for Direct Current Using Impregnated Paper or Paper/Plastic Film Dielectric | |
| Fixed resistors for use in \xe9lectronic equipment Part 6: Blank detail specification - Fixed resistor networks with individually measurable resistors, all of equal value and equal d issi pation Assessment... | |
| FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION | |
| FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION: POWER RESISTORS FOR THROUGH HOLE ASSEMBLY ON CIRCUIT BOARDS (THT) OR FOR ASSEMBLY ON CHASSIS | |
| FIXED RESISTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT RESISTORS | |
| Fixed resistors for use in electronic equipment \x96 Part 2-10: Blank detail specification: Low-power film resistors with leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification... | |
| Fixed resistors for use in electronic equipment \x96 Part 4-10: Blank detail specification: Power resistors with axial leads for through-hole assembly on circuit boards (THT), for general electronic equipment, classification... | |
| Fixed Resistors for Use in Electronic Equipment Part 2: Blank Detail Specification: Fixed Low-Power Non-Wirewound Resistors Assessment Level E | |
| Fixed Resistors for Use in Electronic Equipment Part 2: Blank Detail Specification: Fixed Low-Power Non-Wirewound Resistors Assessment Level F | |
| Fixed Resistors for Use in Electronic Equipment Part 2: Sectional Specification: Fixed Low-Power Non-Wirewound Resistors | |
| Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors Assessment Level E | |
| Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors Assessment Level F | |
| Fixed Resistors for Use in Electronic Equipment Part 4: Blank Detail Specification: Fixed Power Resistors, Heat-Sink Types Assessment Level H | |
| Fixed Resistors for Use in Electronic Equipment Part 4: Detail Specification: Fixed Power Wirewound Resistors with Solderable Axial Wire Leads - Stability Class 1 % - Assessment Level E First... | |
| Fixed Resistors for Use in Electronic Equipment Part 4: Detail Specification: Fixed Power Wirewound Resistors with Solderable Axial Wire Leads - Stability Class 5 % - Assessment Level E | |
| Fixed Resistors for Use in Electronic Equipment Part 5: Blank Detail Specification: Fixed Precision Resistors Assessment Level E | |
| Fixed Resistors for Use in Electronic Equipment Part 5: Blank Detail Specification: Fixed Precision Resistors Assessment Level F | |
| Fixed Resistors for Use in Electronic Equipment Part 5: Detail Specification: Fixed Precision Wirewound Resistors with Solderable Axial Wire Leads - Stability Class 0,1% - Assessment Level E | |
| Fixed Resistors for Use in Electronic Equipment Part 5: Sectional Specification: Fixed Precision Resistors | |
| Fixed Resistors for Use in Electronic Equipment Part 6: Blank Detail Specification - Fixed Resistor Networks with Individually Measurable Resistors, of Either Different Resistance Values or Different Rated Dissipations Assessment... | |
| Fixed Resistors for use in Electronic Equipment Part 6: Detail Specification: Fixed Film Resistor Networks with Individually Measurable Resistors, all of Equal Value and Equal Dissipation, Class 1 (Dual-in-Line Network)... | |
| Fixed Resistors for Use in Electronic Equipment Part 6: Detail Specification: Fixed Thick Film Resistor Networks with Individually Measurable Resistors, All of Equal Value and Equal Dissipation, Class 1 (Single-In-Line... | |
| Fixed resistors for use in electronic equipment Part 6: Sectional specification - Fixed resistor networks with individually measurable resistors | |
| Fixed Resistors for Use in Electronic Equipment Part 7: Blank Detail Specification: Fixed Resistor Networks in Which Not All Resistors Are Individually Measurable Assessment Level E | |
| Fixed Resistors for Use in Electronic Equipment Part 7: Sectional Specification: Fixed Resistor Networks in Which Not All Resistors Are Individually Measurable | |
| Fixed Resistors for Use in Electronic Equipment Part 8: Blank Detail Specification: Fixed Chip Resistors. Assessment Level E | |
| Fixed resistors for use in electronic equipment Part 9-1: Blank detail specification: Fixed surface mount resistor networks with individually measurable resistors Assessment level EZ | |
| Fixed resistors for use in electronic equipment Part 9: Sectional specification: Fixed surface mount resistor networks with individually measurable resistors | |
| Gear Power Rating for Cylindrical Shell and Trunnion Supported Equipment | |
| Generic Performance Specification for Printed Boards | |
| GRID SYSTEMS FOR PRINTED CIRCUITS | |
| Guideline for Development of Effective Water Sharing Agreements | |
| Health Effects Evaluation and Criteria for Chemicals in Drinking Water | |
| Hearing Aids - Part 12: Dimensions of Electrical Connector Systems | |
| Hearing Aids - Part 13: Electromagnetic Compatibility (EMC) | |
| Hearing Aids - Part 14: Specification of a Digital Interface Device | |
| HEARING AIDS - PART 1: HEARING AIDS WITH INDUCTION PICK-UP COIL INPUT *** SAEM AS BS 6083 P1 *** CONSOLIDATED REPRINT | |
| Hearing Aids Part 10: Guide to Hearing Aid Standards | |
| Hearing Aids Part 11: Symbols and Other Markings on Hearing Aids and Related Equipment | |
| Hearing Aids Part 2: Hearing Aids with Automatic Gain Control Circuits | |
| Hearing Aids Part 3: Hearing Aid Equipment Not Entirely Worn on the Listener | |
| Hearing Aids Part 5: Nipples for Insert Earphones | |
| Hearing Aids Part 6: Characteristics of Electrical Input Circuits for Hearing Aids | |
| Hearing Aids Part 9: Methods of Measurement of Characteristics of Hearing Aids with Bone Vibrator Output | |
| Hollow Metallic Waveguides Part 1: General Requirements and Measuring Methods | |
| Hollow Metallic Waveguides Part 2: Relevant Specifications for Ordinary Rectangular Waveguides | |
| Hollow Metallic Waveguides Part 3: Relevant Specifications for Flat Rectangular Waveguides | |
| Hollow Metallic Waveguides Part 4: Relevant Specifications for Circular Waveguides | |
| Hollow Metallic Waveguides Part 6: Relevant Specifications for Medium Flat Rectangular Waveguides | |
| Identification by Hour Numbers of the Phase Conductors of 3-Phase Electric Systems | |
| IEC 60079-29-1 Edition 1.0 2007-08 Explosive atmospheres \x96 Part 29-1: Gas detectors \x96 Performance requirements of detectors for flammable gases | |
| IEC Reference Coupler for the Measurement of Hearing Aids Using Earphones Coupled to the Ear by Means of Ear Inserts | |
| INSULATED BUSHINGS FOR ALTERNATING VOLTAGES ABOVE 1 000 V | |
| LEAD-ACID STARTER BATTERIES - PART 1: GENERAL REQUIREMENTS AND METHODS OF TEST | |
| LEAD-ACID STARTER BATTERIES - PART 2: DIMENSIONS OF BATTERIES AND DIMENSIONS AND MARKING OF TERMINALS | |
| Lead-acid starter batteries \x96 Part 4: Dimensions of batteries for heavy vehicles IEC | |
| Lead-acid starter batteries \x96 Part 6: Batteries for micro-cycle applications | |
| Lead-acid starter batteries \x96 Part 7: General requirements and methods of test for motorcycle batteries | |
| Lead-Acid Starter Batteries Part 1: General Requirements and Methods of Test | |
| Lead-Acid Starter Batteries Part 4: Dimensions of Batteries for Heavy Trucks | |
| Letter Symbols for Semiconductor Devices and Integrated Microcircuits | |
| Lever Switches Part 1: General Requirements and Rules for the Preparation of Detail Specifications | |
| Lever Switches Part 2: Requirements for Switches of Type I, Slow-Make Slow-Break | |
| Lever Switches Part 3: Requirements for Switches of Type 2, Quick Make, Quick Break (Toggle Switches) | |
| Lever Switches Part 4: Requirements for Miniature Toggle Switches | |
| Lighting arresters - Part 2: Expulsion-type lighting arresters | |
| Magnetic Tape Recording and Reproducing Systems - Part 2: Calibration Tapes | |
| MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 4: MECHANICAL MAGNETIC TAPE PROPERTIES | |
| MAGNETIC TAPE SOUND RECORDING AND REPRODUCING SYSTEMS - PART 5: ELECTRICAL MAGNETIC TAPE PROPERTIES | |
| Magnetic Tape Sound Recording and Reproducing Systems - Part 7: Cassette for Commercial Tape Records and Domestic Use | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 10: Time and Address Codes | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 11: Address Code for Compact Cassettes | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 1: General Conditions and Requirements | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 3: Methods of Measuring the Characteristics of Recording and Reproducing Equipment for Sound on Magnetic Tape | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 6: Reel-to-Reel Systems | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 8: Eight-Track Magnetic Tape Cartridge for Commercial Tape Records and Domestic Use | |
| Magnetic Tape Sound Recording and Reproducing Systems Part 9: Magnetic Tape Cartridge for Professional Use | |
| Manual Drum Pumps for Handling Flammable Liquids | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 0: Precautions Relating to Methods of Measurement of Electronic Tubes and Valves | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 10: Methods of Measurement of Audio-Frequency Output Power and Distortion | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 11: Methods of Measurement of Radio-Frequency Output Power | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 12: Methods of Measuring Electrode Resistance, Transconductance, Amplification Factor, Conversion Resistance and Conversion Transconductance | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 13: Methods of Measurement of Emission Current from Hot Cathodes for High-Vacuum Electronic Tubes and Valves First Edition | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 15: Methods of Measurement of Spurious and Unwanted Electrode Currents | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 16: Methods of Measurement for Television Picture Tubes | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 17: Methods of Measurement of Gasfilled Tubes and Valves | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 18: Methods of Measurement of Noises Due to Mechanical or Acoustic Excitations | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 19: Methods of Measurement on Corona Stabilizers | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 1: Measurement of Electrode Current | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 20: Methods of Measurement of Thyratron Pulse Modulators | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 21: Methods of Measurement of Cross-Modulation in Electronic Tubes and Valves | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 22: Methods of Measurement for Cold Cathode Counting and Indicator Tubes | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 23: Methods of Measurement of Vacuum Pulse Modulator Tubes and Valves | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 2: Measurement of Heater or Filament Current | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 3: Measurement of Equivalent Input and Output Admittances | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 4: Methods of Measuring Noise Factor | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 5: Methods of Measuring Hiss and Hum | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 6: Methods of Application of Mechanical Shock (Impulse) Excitation to Electronic Tubes and Valves | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 7: Measurement of Equivalent Noise Resistance | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 8: Measurement of Cathode Heating Time and Heater Warm-Up Time | |
| Measurements of the Electrical Properties of Electronic Tubes and Valves Part 9: Methods of Measuring the Cathode-Interface Impedance | |
| Measurements of the Electrical Properties of Electronic Tubes Part 14: Methods of Measurement of Radar and Oscilloscope Cathode-Ray Tubes | |
| Measurements of the Electrical Properties of Electronic Tubes Part 24: Methods of Measurement of Cathode-Ray Charge-Storage Tubes | |
| Measurements of the Electrical Properties of Electronic Tubes Part 25: Methods of Measurement of Geiger-Muller Counter Tubes | |
| Measurements of the Electrical Properties of Electronic Tubes Part 26: Methods of Measurement for Camera Tubes | |
| Measurements of the Electrical Properties of Electronic Tubes Part 27: Methods of Measurement for Intermodulation Products in Transmitting Tubes | |
| Measurements of the Electrical Properties of Electronic Tubes Part 28: Methods of Measurement of Colour Television Picture Tubes | |
| Medical Applications Addendum to IPC-6012E, Qualification and Performance Specification for Rigid Printed Boards | |
| Medical Applications Addendum to IPC-6013E Qualification and Performance Specification for Flexible/Rigid-Flexi ble Printed Boards | |
| Method for Determining the Comparative and the Proof Tracking Indices of Solid Insulating Materials under Moist Conditions | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials (Commented Version) | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials CORRIGENDUM 1 | |
| Method for the determination of the proof and the comparative tracking indices of solid insulating materials CORRIGENDUM 2 | |
| METHODS FOR THE MEASUREMENT OF DIRECT INTERELECTRODE CAPACITANCES OF ELECTRONIC TUBES AND VALVES | |
| Methods of Measurement of Electro-Acoustical Characteristics of Hearing Aids Part 4: Magnetic Field Strength in Audio-Frequency Induction Loops for Hearing Aid Purposes | |
| Methods of Measurement on Receivers for Television - Part 7: HDTV Displays | |
| METHODS OF MEASUREMENT ON RECEIVERS FOR TELEVISION BROADCAST TRANSMISSIOMS - PART 1: GENERAL CONSIDERATIONS - MEASUREMENTS AT RADIO AND VIDEO FREQUENCIES | |
| Methods of Test for Volume Resistivity and Surface Resistivity of Solid Electrical Insulating Materials Second Edition | |
| Miniature Fuses - Part 10: User Guide for Miniature Fuses | |
| MINIATURE FUSES - PART 1: DEFINITIONS FOR MINIATURE FUSES AND GENERAL REQUIREMENTS FOR MINIATURE FUSE-LINKS | |
| MINIATURE FUSES - PART 2: CARTRIDGE FUSE-LINKS | |
| Miniature fuses - Part 3: Sub-miniature fuse links | |
| MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES | |
| Miniature Fuses - Part 4: Universal Modular Fuse-Links (UMF) | |
| MINIATURE FUSES - PART 6: FUSE-HOLDERS FOR MINIATURE FUSE-LINKS | |
| Miniature fuses - Part 9: Miniature fuse-links for special applications with partial-range breaking capacity | |
| Miniature fuses \x96 Part 1: Definitions for miniature fuses and general requirements for miniature fuse-links | |
| Miniature fuses \x96 Part 6: Fuse-holders for miniature fuse-links | |
| Miniature fuses \x96 Part 7: Miniature fuse-links for special applications | |
| Miniature fuses \x96 Part 8: Fuse resistors with particular overcurrent protection | |
| Miniature Fuses Part 5: Guidelines for Quality Assessment of Miniature Fuse-Links | |
| National Differences For UL 60079-6 Explosive atmospheres \x96 Part 6: Equipment protection by liquid immersion "o" | |
| Numbering of Electrodes and Designation of Units in Electronic Tubes and Valves | |
| Plugs and Socket-Outlets for Domestic and Similar General Use Standards (Amendment 1-1979) | |
| Power Capacitors for Induction Heating Installations - Part 1: General | |
| Preparation of Outline Drawings of Oscilloscope and Picture Tubes | |
| PRIMARY BATTERIES - PART 1: GENERAL | |
| PRIMARY BATTERIES - PART 2: PHYSICAL AND ELECTRICAL SPECIFICATIONS | |
| PRIMARY BATTERIES - PART 3: WATCH BATTERIES | |
| Primary Batteries - Part 5: Safety of Batteries with Aqueous Electrolyte | |
| PRIMARY BATTERIES \x96 Part 1: General | |
| Primary batteries \x96 Part 2 : Physical and electrical specifications | |
| Primary batteries \x96 Part 3: Watch batteries | |
| Primary batteries \x96 Part 4: Safety of lithium batteries (Commented Version) | |
| PRIMARY BATTERIES \x96 Part 4: Safety of lithium batteries | |
| Primary batteries \x96 Part 5: Safety of batteries with aqueous electrolyte | |
| Primary batteries \x96 Part 6: Guidance on environmental aspects | |
| PRIMARY BATTERIES Part 5: Safety of batteries with aqueous electrolyte | |
| PRIMARY BATTERIES SERIES | |
| Qualification and Performance for Rigid Printed Boards | |
| Qualification and Performance Specification for Flexible and Rigid-Flexible Printed Boards | |
| Qualification and Performance Specification for Flexible Printed Boards | |
| Qualification and Performance Specification for Flexible/Rigid-Flexi ble Printed Boards | |
| Qualification and Performance Specification for Rigid Printed Boards | |
| Quartz Crystal Units for Frequency Control and Selection Part 2: Guide to the Use of Quartz Crystal Units for Frequency Control and Selection - Section One: Quartz Crystal Units for... | |
| Quartz Crystal Units for Frequency Control and Selection Part 2: Guide to the Use of Quartz Crystal Units for Frequency Control and Selection | |
| Quartz Crystal Units for Frequency Control and Selection Part 3: Standard Outlines and Lead Connections | |
| Quartz Crystal Units of Assessed Quality - Part 1: Generic Specification | |
| Quartz crystal units of assessed quality - Part 4: Crystal units with thermistors | |
| RADIO FREQUENCY CABLES - PART 0-1: GUIDELINES TO THE DESIGN OF DETAIL SPECIFICATIONS - COAXIAL CABLES | |
| RADIO-FREQUENCY CABLES - PART 1: GENERAL REQUIREMENTS AND MEASURING METHODS | |
| Radio-Frequency Cables Part 2: Relevant Cable Specifications | |
| Radio-Frequency Cables Part 3: General Requirements and Tests for Single-Unit Coaxial Cables for Use in Cabled Distribution Systems | |
| Radio-Frequency Cables Part 4: Specification for Superscreened Cables Section 1 - General Requirements and Test Methods | |
| Rating Systems for Electronic Tubes and Valves and Analogous Semiconductor Devices | |
| Recommendation for Capacitors for Inductive Heat Generating Plants Operating at Frequencies between 40 and 24000 Hz | |
| Recommendation for Commercial Annealed Aluminium Electrical Conductor Wire | |
| Recommendation for Commercial-Purity Aluminium Busbar Material | |
| Recommendation for heat-treated aluminium alloy busbar material of the aluminium-magnesium- silicon type | |
| Recommendations for Ballasts for Fluorescent Lamps | |
| Recommendations for Polycrystalline Semiconductor Rectifier Stacks and Equipments | |
| Recommended graphical symbols Part 13: Block symbols for transmission and miscellaneous applications | |
| Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions - Part 3: Electrical Measurements on Multichannel Sound Television Receivers Using Subcarrier Systems | |
| Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions - Part 4: Electrical Measurements on Multichannel Sound Television Receivers Using the Two-Carrier FM-System | |
| Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions - Part 8: Measurements on D2-MAC/Packet Equipment | |
| Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 2: Electrical and Acoustic Measurements at Audio-Frequencies | |
| Recommended Methods of Measurement on Receivers for Television Broadcast Transmissions Part 6: Measurement under Conditions Different from Broadcast Signal Standards | |
| Recommended Methods of Measurements on Receivers for Television Broadcast Transmissions - Part 5: Electrical Measurements on Multichannel Sound Television Receivers Using the NICAM Two-Channel Digital Sound-System | |
| Rotary Wafer Switches (Low Current Rating) Part 1: General Requirements and Measuring Methods (Supplement A-1973) | |
| Rotary Wafer Switches (Low Current Rating) Part 2: Rotary Wafer Switches with Central Mounting (Supplement A-1965) | |
| Rotary Wafer Switches (Low Current Rating) Part 3: Rotary Wafer Switches with Two-Hole Mounting (Supplement A-1965) | |
| Rotary Wafer Switches (Low Current Rating) Part 4: Rotary Wafer Switches with Central Mounting; Maximum 12 Positions; Maximum Diameter 40 mm | |
| Rotary Wafer Switches (Low Current Rating) Part 5: Rotary Wafer Switches with Two-Hole Mounting; Maximum 26 Positions; Maximum Diameter 60 mm | |
| Rotary Wafer Switches (Low Current Rating) Part 6: Rotary Wafer Switches with Printed Wafers; Maximum 12 Positions; Maximum Mounting Dimension 45 mm | |
| Rotary Wafer Switches (Low Current Rating) Part 7: Rotary Wafer Switches with Central Mounting; Maximum 12 Positions and Maximum Diameter 20 mm | |
| Second supplement to Publication 60117-13 {1969} Recommended graphical symbols Part 13: Block symbols for transmission and miscellaneous applications | |
| Semiconductor converters \x96 General requirements and line commutated converters \x96 Part 1-1: Specification of basic requirements (Commented Version) | |
| Semiconductor Convertors - General Requirements and Line Commutated Convertors Part 1-1: Specifications of Basic Requirements | |
| Semiconductor Convertors General Requirements and Line Commutated Convertors Part 1-3: Transformers and Reactors | |
| Semiconductor Convertors Part 2: Semiconductor Self-Commutated Convertors | |
| Semiconductor Convertors Part 3: Semiconductor Direct D.C. Convertors (D.C. Chopper Convertors) | |
| Semiconductor Convertors Part 4: Method of Specifying the Performance and Test Requirements of Uninterruptible Power Systems First Edition | |
| Semiconductor Convertors Part 5: Switches for Uninterruptible Power Systems (UPS Switches) | |
| Semiconductor Convertors Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses | |
| SEMICONDUCTOR CONVERTORS | |
| SERIES CAPACITORS FOR POWER SYSTEMS - PART 1: GENERAL | |
| Series Capacitors for Power Systems - Part 2: Protective Equipment for Series Capacitor Banks | |
| Series Capacitors for Power Systems - Part 3: Internal Fuses | |
| Series capacitors for power systems \x96 Part 4: Thyristor controlled series capacitors | |
| Series Capacitors for Power Systems | |
| Set of 6011,6012,6013,6015, 6016, 6017 AND 6018 | |
| Shipboard Telecommunication Cables and Radio-Frequency Cables Shipboard Flexible Coaxial Cables | |
| Sockets and Accessories for Electronic Plug-In Devices Part 1: General Requirements and Methods of Test | |
| Sockets and Accessories for Electronic Plug-In Devices Part 3: Sockets for Crystal Holders | |
| Space and Military Avionics Applications Addendum to IPC-6012D Qualification and Performance Specification for Rigid Printed Boards | |
| Space and Military Avionics Applications Addendum to IPC-6012E, Qualification and Performance Specification for Rigid Printed Boards | |
| Space and Military Avionics Applications Addendum to IPC-6012F, Qualification and Performance Specification for Rigid Printed Boards | |
| Specification for High Speed Helical Gear Units | |
| Specifications for Powder Metallurgy Gears | |
| Standard for Gearmotor, Shaft Mounted and Screw Conveyor Drives | |
| Standard for Industrial Enclosed Gear Drives | |
| STANDARD FOR SECURITY SERVICES IN FIRE LOSS PREVENTION | |
| Standard for Spur, Helical, Herringbone and Bevel Enclosed Drives | |
| Standard for Spur, Helical, Herringbone, and Bevel Enclosed Drives | |
| Standard rated currents (2 to 63 A) of fuse links for low voltage fuses | |
| Supplement C to Publication 60117-13 (First edition - 1969) Recommended graphical symbols Part 13: Block symbols for transmission and miscellaneous applications | |
| Supplement D to Publication 60117-13 (First edition \x96 1969) Recommended graphical symbols Part 13: Block symbols for transmission and miscellaneous applications | |
| SURGE ARRESTERS - PART 1: NON-LINEAR RESISTOR TYPE GAPPED SURGE ARRESTERS FOR A.C. SYSTEMS | |
| SURGE ARRESTERS - PART 5: SELECTION AND APPLICATION RECOMMENDATIONS | |
| Surge Arresters - Part 6: Surge Arresters Containing Both Series and Parallel Gapped Structures - Rated 52 kV and Less | |
| Surge arresters \x96 Part 5: Selection and application recommendations | |
| Surge arresters \x96 Part 8: Metal-oxide surge arresters with external series gap (EGLA) for overhead transmission and distribution lines of a.c. systems above 1 kV | |
| Surge arresters \x96 Part 9: Metal-oxide surge arresters without gaps for HVDC converter stations | |
| Surge Arresters Part 4: Metal-Oxide Surge Arresters without Gaps for A.C. Systems | |
| Testing and Calibration of Ultrasonic Therapeutic Equipment | |
| Tests on oil-filled and gas-pressure cables and their accessories Part 1: Oil-filled, paper-insulated, metal-sheathed cables and accessories for alternating voltages up to and including 400 kV | |
| Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 2: Internal Gas-Pressure Cables and Accessories for Alternating Voltages up to 275 kV | |
| Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 3: External Gas- Pressure (Gas Compression) Cables and Accessories for Alternating Voltages up to 275 kV | |
| Tests on Oil-Filled and Gas-Pressure Cables and Their Accessories Part 4: Oil-Impregnated Paper-Insulated High Pressure Oil-Filled Pipe-Type Cables and Accessories for Alternating Voltages up to and Including 400 kV | |
| UL Standard for Safety Explosive Atmospheres - Part 25: Intrinsically Safe Electrical Systems | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 26: Equipment with Equipment Protection Level (EPL) Ga | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 28: Protection of Equipment and Transmission Systems Using Optical Radiation | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 29-1: Gas Detectors \x96 Performance Requirements of Detectors for Flammable Gases | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 29-2: Gas Detectors \x96 Selection, Installation, Use and Maintenance of Detectors for Flammable Gases and Oxygen | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 29-4: Gas Detectors \x96 Performance Requirements of Open Path Detectors for Flammable Gases | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 30-1: Electrical Resistance Trace Heating \x96 General and Testing Requirements | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 31: Equipment Dust Ignition Protection by Enclosure \x93t\x94 | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 33: Equipment Protection by Special Protection \x93s\x94 | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 47: Equipment Protection by 2-Wire Intrinsically Safe Ethernet Concept (2-WISE) | |
| UL Standard for Safety Primary Batteries \x96 Part 4: Safety of Lithium Batteries | |
| Var-Hour (Reactive Energy) Meters |
| << Prev | Next >> |