Accuris Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
10
20
30
40
50
55
56
57
58
59
60
61
62
63
64
65
66
67
70
80
90
100
110
120
150
200
250
300
350
400
500
1000
1500
1620
| Product Name | Notes |
|---|---|
| AMENDEMENT 28 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| AMENDEMENT 29 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| AMENDEMENT 30 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| AMENDEMENT 31 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| AMENDEMENT 32 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendement 48 Culots de lampes et douilles ainsi que calibres pour le contr\xf4le de l'interchangeabilit\ xe9 et de la s\xe9curit\xe9 \x96 Partie 3: Calibres | |
| Amendment 1 - Basic environmental testing procedures \x96 Part 2-7: Tests \x96 Test Ga and guidance: Acceleration, steady state | |
| AMENDMENT 1 - Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests | |
| Amendment 1 Basic environmental testing procedures \x96 Part 2-40: Tests \x96 Test Z/AM: Combined cold/low air pressure tests | |
| Amendment 1 Basic environmental testing procedures \x96 Part 2-41: Tests \x96 Test Z/BM: Combined dry heat/low air pressure tests | |
| Amendment 1 Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature Tests | |
| Amendment 1 Basic Environmental Testing Procedures Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle) | |
| AMENDMENT 1 Basic Environmental Testing Procedures Part 2: Tests - Test Ec: Drop and Topple, Primarily for Equipment- Type Specimens | |
| Amendment 1 Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry Heat | |
| AMENDMENT 1 Basic Environmental Testing Procedures Part 2: Tests Test Fda: Random Vibration Wide Band - Reproducibility High | |
| Amendment 1 Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents | |
| Amendment 1 Basic environmental testing procedures Part 2: Tests Tests A: Cold | |
| Amendment 1 Basic Environmental Testing Procedures Part 4: Information for Specification Writers - Test Summaries | |
| Amendment 1 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 3: Special Requirements for Wattmeters and Varmeters | |
| Amendment 1 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: Recommended Test Methods | |
| Amendment 1 Electrical Apparatus for Explosive Gas Atmospheres Part 1: Construction and Test of Flameproof Enclosures of Electrical Apparatus | |
| AMENDMENT 1 Environmental testing - Part 2-74: Tests - Test Xc: Fluid contamination | |
| AMENDMENT 1 Environmental testing \x96 Part 1: General and guidance | |
| AMENDMENT 1 Environmental testing \x96 Part 2-10: Tests \x96 Test J and guidance: Mould growth | |
| AMENDMENT 1 Environmental testing \x96 Part 2-58: Tests \x96 Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) | |
| AMENDMENT 1 Environmental testing \x96 Part 2-64: Tests \x96 Test Fh: Vibration, broadband random and guidance | |
| AMENDMENT 1 Environmental testing \x96 Part 2-67: Tests \x96 Test Cy: Damp heat, steady state, accelerated test primarily intended for components | |
| AMENDMENT 1 Explosive atmospheres - Part 19: Equipment repair, overhaul and reclamation | |
| AMENDMENT 1 Explosive atmospheres \x96 Part 18: Equipment protection by encapsulation \x93m\x94 | |
| AMENDMENT 1 IEC standard current ratings | |
| AMENDMENT 1 Insulation co-ordination \x96 Part 1: Definitions, principles and rules | |
| AMENDMENT 1 Marking codes for resistors and capacitors | |
| Amendment 1 Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and their... | |
| AMENDMENT 1 Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air | |
| AMENDMENT 1 Power transformers \x96 Part 10-1: Determination of sound levels \x96 Application guide | |
| Amendment 1 Tungsten filament lamps for general service | |
| Amendment 10 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 11 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| Amendment 12 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| Amendment 13 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| Amendment 14 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| Amendment 15 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| Amendment 16 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| AMENDMENT 2 Audio, video and similar electronic apparatus \x96 Safety requirements | |
| Amendment 2 Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry Heat | |
| Amendment 2 Basic Environmental Testing Procedures Part 4: Information for Specification Writers - Test Summaries | |
| Amendment 2 Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: Recommended Test Methods | |
| Amendment 2 Environmental Testing Part 2: Tests - Tests A: Cold | |
| Amendment 2 Tungsten filament lamps for domestic and similar general lighting purposes \x96 Performance requirements | |
| Amendment 20 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety - Part 3: Gauges | |
| Amendment 21 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 22 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 23 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 23 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 24 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 25 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 26 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 26 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 27 Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety - Part 2: Lampholders | |
| Amendment 27 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 28 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 29 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 3 Tungsten filament lamps for domestic and similar general lighting purposes \x96 Performance requirements | |
| Amendment 30 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 31 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 32 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 33 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 33 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 34 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 34 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 35 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 35 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 36 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 36 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 37 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 37 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 38 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 38 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 38 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 39 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 39 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 39 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 40 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 40 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 40 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 41 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 41 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 41 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 42 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 42 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 42 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 43 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 43 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 43 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 44 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 45 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 45 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 45 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 46 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 47 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 47 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 47 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 48 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 48 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 49 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 49 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 49 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 5 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| AMENDMENT 5 Tungsten filament lamps for domestic and similar general lighting purposes \x96 Performance requirements | |
| Amendment 50 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 50 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 50 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 51 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 51 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 51 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 52 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | |
| Amendment 52 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 52 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 53 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | |
| Amendment 53 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 53 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 54 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps | |
| Amendment 54 Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges | |
| Amendment 54 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 55 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 55 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 55 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 56 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 56 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 56 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 56 to edition 3.0 2017-05 LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY \x96 Part 1: Lamp caps | |
| Amendment 57 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 57 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 58 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 58 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 58 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 59 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 59 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 59 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 6 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| Amendment 60 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| AMENDMENT 60 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 2: Lampholders | |
| Amendment 60 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 3: Gauges | |
| Amendment 61 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 62 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp cap | |
| AMENDMENT 63 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| AMENDMENT 64 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Amendment 7 Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 4: Guidelines and general information | |
| AMENDMENT NO 1 TO IEC PUBLICATION 68-2-10A: BASIC ENVIRONMENTAL TESTING PROCEDURES Part 2: Tests - Test J: Mould growth - Appendix A: Guide | |
| Amendment No. 1 Basic Environmental Testing Procedures Part 2: Tests - Test Fdb: Random Vibration Wide Band - Reproducibility Medium | |
| Amendment No. 1 to Publication 61 Lamp caps and holders together with gauges for the control of interchangeability and safety | |
| Amendment No. 2 to Publication 61 Lamp caps and holders together with gauges for the control of interchangeability and safety | |
| AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS \x96 SAFETY REQUIREMENTS | |
| BASIC AND SAFETY PRINCIPLES FOR MAN-MACHINE INTERFACE, MARKING AND IDENTIFICATION - CODING PRINCIPLES FOR INDICATION DEVICES AND ACTUATORS | |
| BASIC ENVIRONMENTAL TESTING PROCEDURES - PART 2: TESTS - TEST EB AND GUIDANCE: BUMP *** SAME AS BS 011 P2.1EB *** | |
| Basic environmental testing procedures \x96 Part 2: Tests \x96 Test J and guidance: Mould growth | |
| Basic environmental testing procedures for electronic components and electronic equipment \x96 Part 2: Tests \x96 Test J: Mould growth | |
| Basic environmental testing procedures for electronic components and electronic equipment Part 2 - Test D Accelerated damp heat | |
| Basic environmental testing procedures for electronic components and electronic equipment Part 2 Tests - Test N Change of temperature | |
| Basic environmental testing procedures for electronic components and electronic equipment Part 2 Tests - Tests A Cold | |
| Basic environmental testing procedures Part 1: General and guidance | |
| Basic Environmental Testing Procedures Part 2: Tests - Guidance on Change of Temperature Tests | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Ca: Damp Heat, Steady State | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Db and Guidance: Damp Heat, Cyclic (12 + 12-Hour Cycle) | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Ec: Drop and Topple, Primarily for Equipment- Type Specimens | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Fdb: Random Vibration Wide Band - Reproducibility Medium | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Fdc: Random Vibration Wide Band - Reproducibility Low | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Ga and Guidance: Acceleration, Steady State | |
| Basic environmental testing procedures Part 2: Tests - Test N: Change of temperature | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Z/AD: Composite Temperature/Humidity Cyclic Test | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Z/AM: Combined Cold/Low Air Pressure Tests | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Z/AMD: Combined Sequential Cold, Low Air Pressure, and Damp Heat Test | |
| Basic Environmental Testing Procedures Part 2: Tests - Test Z/BM: Combined Dry Heat/Low Air Pressure Tests | |
| Basic Environmental Testing Procedures Part 2: Tests - Tests B: Dry Heat | |
| BASIC ENVIRONMENTAL TESTING PROCEDURES PART 2: TESTS GUIDANCE FOR SOLAR RADIATION TESTING | |
| Basic Environmental Testing Procedures Part 2: Tests Guidance on the Application of the Tests of IEC Publication 68 to Simulate the Effects of Storage | |
| Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kc: Sulphur Dioxide Test for Contacts and Connections | |
| Basic Environmental Testing Procedures Part 2: Tests Guidance to Test Kd: Hydrogen Sulphide Test for Contacts and Connections | |
| Basic Environmental Testing Procedures Part 2: Tests Guidance to Tests Z/AFc and Z/BFc: Combined Temperature (Cold and Dry Heat) and Vibration (Sinusoidal) Tests | |
| Basic Environmental Testing Procedures Part 2: Tests Mounting of Components, Equipment and Other Articles for Dynamic Tests Including Shock (Ea), Bump (Eb), Vibration (Fc and Fd) and Steady-State Acceleration (Ga)... | |
| Basic Environmental Testing Procedures Part 2: Tests Test Ed: Free Fall | |
| Basic Environmental Testing Procedures Part 2: Tests Test Ee and Guidance: Bounce | |
| Basic Environmental Testing Procedures Part 2: Tests Test Fd: Random Vibration Wide Band - General Requirements | |
| Basic Environmental Testing Procedures Part 2: Tests Test Fda: Random Vibration Wide Band - Reproducibility High | |
| Basic Environmental Testing Procedures Part 2: Tests Test Kc: Sulphur Dioxide Test for Contacts and Connections | |
| Basic environmental testing procedures Part 2: Tests Test Kd: Hydrogen sulphide test for contacts and connections | |
| Basic Environmental Testing Procedures Part 2: Tests Test M: Low Air Pressure | |
| Basic Environmental Testing Procedures Part 2: Tests Test Sa: Simulated Solar Radiation at Ground Level | |
| Basic Environmental Testing Procedures Part 2: Tests Test Ta: Soldering Solderability Testing by the Wetting Balance Method | |
| Basic Environmental Testing Procedures Part 2: Tests Test XA and Guidance: Immersion in Cleaning Solvents | |
| Basic Environmental Testing Procedures Part 2: Tests Tests Z/AFc: Combined Cold/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat Dissipating Specimens | |
| Basic Environmental Testing Procedures Part 2: Tests Tests Z/BFc: Combined Dry Heat/Vibration (Sinusoidal) Tests for Both Heat-Dissipating and Non-Heat-Dissipating Specimens | |
| Basic Environmental Testing Procedures Part 2: Tests- Test Ka: Salt Mist | |
| Basic Environmental Testing Procedures Part 3: Background Information Section One - Cold and Dry Heat Tests | |
| Basic Environmental Testing Procedures Part 3: Background Information Section Two-Combined Temperature/Low Air Pressure Tests | |
| Basic Environmental Testing Procedures Part 4: Information for Specification Writers - Test summaries | |
| Basic environmental testing procedures | |
| Characteristic Impedances and Dimensions of Radio-Frequency Coaxial-Cables | |
| Corrigendum 1 Electrical Apparatus for Explosive Gas Atmospheres - Part 1: Flameproof Enclosures "D" | |
| CORRIGENDUM 1 Explosive atmospheres \x96 Part 0: Equipment \x96 General requirements | |
| CORRIGENDUM 1 Explosive atmospheres \x96 Part 18: Equipment protection by encapsulation \x93m\x94 | |
| Dimensions and Output Series for Rotating Electrical Machines - Part 3: Small Built-In Motors - Flange Numbers BF10 to BF50 | |
| Dimensions and Output Series for Rotating Electrical Machines Part 1: Frame Numbers 56 to 400 and Flange Numbers 55 to 1080 | |
| Dimensions and Output Series for Rotating Electrical Machines Part 2: Frame Numbers 355 to 1 000 and Flange Numbers 1180 to 2360 | |
| Dimensions of electronic tubes and valves | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 3: Special Requirements for Wattmeters and Varmeters | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 4: Special Requirements for Frequency Meters | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 5: Special Requirements for Phase Meters, Power Factor Meters and Synchroscopes | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 6: Special Requirements for Ohmmeters (Impedance Meters) and Conductance Meters | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 7: Special Requirements for Multi-Function Instruments | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 8: Special Requirements for Accessories | |
| Direct Acting Indicating Analogue Electrical Measuring Instruments and Their Accessories Part 9: Recommended Test Methods | |
| Eighteenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps | |
| Eighteenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | |
| Eighth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Eighth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Eighth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| ELECTRICAL APPARATUS FOR EXPLOSIVE GAS AMOSPHERES \x96 Part 1: Flameproof enclosures "d" | |
| Electrical Apparatus for Explosive Gas Atmospheres - Part 1-1: Flameproof Enclosures "d " - Method of Test for Ascertainment of Maximum Experimental Safe Gap | |
| Electrical Apparatus for Explosive Gas Atmospheres - Part 14: Electrical Installations in Hazardous Areas (Other Than Mines) | |
| Electrical Apparatus for Explosive Gas Atmospheres Part 19: Repair and Overhaul for Apparatus Used in Explosive Atmospheres (Other Than Mines or Explosives) | |
| Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection Encapsulation "m" | |
| Electrical Apparatus for Use in Class I, Zone 1 Hazardous (Classified) Locations: Type of Protection Flameproof "d" | |
| Electrical Apparatus for Use in Class I, Zone 2 Hazardous (Classified) Locations - Type of Protection "n" | |
| Electrical Apparatus for Use in Class I, Zones 0, 1 & 2 Hazardous (Classified) Locations: General Requirements | |
| Electrical Apparatus for Use in Class I, Zones 0, 1, & 2 Hazardous (Classified) Locations - Intrinsic Safety "i" | |
| Eleventh supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Eleventh supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Eleventh supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| ENVIRONMENTAL TESTING - PART 2-17: TESTS - TEST Q: SEALING | |
| ENVIRONMENTAL TESTING - PART 2-18: TESTS - TEST R AND GUIDANCE: WATER | |
| ENVIRONMENTAL TESTING - PART 2-20: TESTS - TESTS TA AND TB: TEST METHODS FOR SOLDERABILITY AND RESISTANCE TO SOLDERING HEAT OF DEVICES WITH LEADS | |
| ENVIRONMENTAL TESTING - PART 2-21: TESTS - TEST U: ROBUSTNESS OF TERMINATIONS AND INTEGRAL MOUNTING DEVICES | |
| ENVIRONMENTAL TESTING - PART 2-27: TESTS - TEST EA AND GUIDANCE: SHOCK | |
| ENVIRONMENTAL TESTING - PART 2-52: TESTS - TEST KB: SALT MIST, CYCLIC (SODIUM CHLORIDE SOLUTION) | |
| ENVIRONMENTAL TESTING - PART 2-60: TESTS - TEST KE: FLOWING MIXED GAS CORROSION TEST | |
| Environmental Testing - Part 2-77: Tests - Test 77: Body Strength and Impact Shock | |
| Environmental Testing - Part 2-78: Tests - Test 2-78: Body Cab: Damp Heat, Steady State | |
| ENVIRONMENTAL TESTING - PART 2.6: TESTS - TEST FC: VIBRATION [SINUSOIDAL] | |
| Environmental Testing - Part 2: Methods of Test - Test Fg: Vibration, Acoustically Induced | |
| Environmental Testing - Part 2: Test Methods - Test Cx: Damp Heat, Steady State (Unsaturated Pressurized Vapour) | |
| ENVIRONMENTAL TESTING - PART 2: TESTS - ALL PARTS | |
| Environmental Testing - Part 2: Tests - Guidance on Test T: Soldering | |
| Environmental Testing - Part 2: Tests - Test Cy: Damp Heat, Steady State, Accelerated Test Primarily Intended for Components | |
| Environmental Testing - Part 2: Tests - Test Eh: Hammer Tests | |
| Environmental Testing - Part 2: Tests - Test L: Dust and Sand | |
| Environmental Testing - Part 2: Tests - Test Te: Solderability Testing of Electronic Components for Surface Mount Technology by the Wetting Balance Method | |
| Environmental Testing - Part 2: Tests - Test Xb: Abrasion of Markings and Letterings Caused by Rubbing of Fingers and Hands | |
| Environmental Testing - Part 2: Tests - Test Xc: Fluid Contamination | |
| Environmental Testing - Part 3-4: Supporting Documentation and Guidance - Damp Heat Tests | |
| Environmental Testing - Part 3-5: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature Chambers | |
| Environmental Testing - Part 3-6: Supporting Documentation and Guidance - Confirmation of the Performance of Temperature/Humidity Chambers | |
| Environmental Testing - Part 3-7: Supporting Documentation and Guidance - Measurements in Temperature Chambers for Tests A and B (with Load) | |
| ENVIRONMENTAL TESTING \x96 Part 1: 2-69: Tests \x96 Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) | |
| Environmental testing \x96 Part 2-14: Tests \x96 Test N: Change of temperature | |
| Environmental testing \x96 Part 2-20: Tests \x96 Tests Ta and Tb: Test methods for solderability and resistance to soldering heat of devices with leads | |
| Environmental testing \x96 Part 2-21:Tests \x96 Test U: Robustness of terminations and integral mounting devices | |
| Environmental testing \x96 Part 2-38: Tests \x96 Test Z/AD: Composite temperature/humidity cyclic test | |
| Environmental testing \x96 Part 2-52: Tests \x96 Test Kb: Salt mist, cyclic (sodium chloride solution) | |
| Environmental testing \x96 Part 2-5: Tests \x96 Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering | |
| Environmental testing \x96 Part 2-5: Tests \x96 Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing CORRIGENDUM 1 | |
| Environmental testing \x96 Part 2-60: Tests \x96 Test Ke: Flowing mixed gas corrosion test | |
| Environmental testing \x96 Part 2-69: Tests \x96 Test Te/Tc: Solderability testing of electronic components and printed boards by the wetting balance (force measurement) method AMENDMENT 1 | |
| Environmental testing \x96 Part 2-78: Tests \x96 Test Cab: Damp heat, steady state | |
| Environmental testing \x96 Part 2-82: Tests \x96 Test Tx: Whisker test methods for electronic and electric components | |
| Environmental testing \x96 Part 2-83: Tests \x96 Test Tf: Solderability testing of electronic components for surface mounting devices (SMD) by the wetting balance method using solder paste | |
| Environmental testing \x96 Part 2-85: Tests \x96 Test Fj: Vibration \x96 Long time history replication | |
| Environmental testing \x96 Part 2-86: Tests \x96Test Fx: Vibration \x96 Multi-exciter and multi-axis method | |
| Environmental testing \x96 Part 2-87: Tests \x96 UV-C exposure of materials and components to simulate ultraviolet germicidal Irradiation or other applications | |
| Environmental testing \x96 Part 2-88: Tests \x96 Test XD: Resistance of components and assemblies to liquid cleaning media | |
| Environmental testing \x96 Part 3-11: Supporting documentation and guidance \x96 Calculation of uncertainty of conditions in climatic test chambers | |
| Environmental testing \x96 Part 3-13: Supporting documentation and guidance on Test T \x96 Soldering | |
| Environmental testing \x96 Part 3-14: Supporting documentation and guidance \x96 Developing a climatic sequential test | |
| Environmental testing \x96 Part 3-1: Supporting documentation and guidance \x96 Cold and dry heat tests | |
| Environmental testing \x96 Part 3-3: Supporting documentation and guidance \x96 Seismic test methods for equipment | |
| Environmental testing \x96 Part 3-4: Supporting documentation and guidance \x96 Damp heat tests | |
| Environmental testing \x96 Part 3-5: Supporting documentation and guidance \x96 Confirmation of the performance of temperature chambers | |
| Environmental testing \x96 Part 3-6: Supporting documentation and guidance \x96 Confirmation of the performance of temperature/humidity chambers | |
| Environmental testing \x96 Part 3-7: Supporting documentation and guidance \x96 Measurements in temperature chambers for tests A (Cold) and B (Dry heat) (with load) | |
| Environmental testing Part 2-80: Tests Test Fi: Vibration Mixed mode | |
| Environmental testing Part 2-81: Tests Test Ei: Shock Shock response spectrum synthesis | |
| Environmental Testing Part 2: Test Methods Test Fe: Vibration - Sine-Beat Method | |
| Environmental Testing Part 2: Test Methods Test Ff: Vibration - Time-History Method | |
| Environmental Testing Part 2: Test Methods Test Fh: Vibration, Broad-Band Random (Digital Control) and Guidance | |
| Environmental Testing Part 2: Test Methods Test Z/ABDM: Climatic Sequence | |
| Environmental Testing Part 2: Testing Methods Test Eg: Impact, Spring Hammer | |
| Environmental Testing Part 2: Tests - Guidance for Damp Heat Tests | |
| Environmental Testing Part 2: Tests - Test Cb: Damp Heat, Steady State, Primarily for Equipment | |
| Environmental Testing Part 2: Tests - Test Td: Solderability, Resistance to Dissolution of Metallization and to Soldering Heat of Surface Mounting Devices (SMD) | |
| Environmental testing Part 2: Tests Test Fd, Test Fda, Test Fdb and Test Fdc | |
| Environmental testing Part 3-8: Supporting documentation and guidance Selecting amongst vibration tests | |
| Environmental Testing Part 3: Guidance Seismic Test Methods for Equipments | |
| Environmental Testing Part 5: Guide to Drafting of Test Methods - General Principles | |
| Environmental Testing Part 5: Guide to Drafting of Test Methods - Terms and Definitions | |
| EXPLOSIVE ATMOSPHERES - Part 10-1: Classification of areas - Explosive gas atmospheres | |
| EXPLOSIVE ATMOSPHERES \x96 Part 0: Equipment \x96 General requirements | |
| Explosive atmospheres \x96 Part 10-1: Classification of areas - Explosive gas atmospheres (Commented Version) | |
| Explosive atmospheres \x96 Part 10-1: Classification of areas \x96 Explosive gas atmospheres (Commented Version) | |
| Explosive atmospheres \x96 Part 10-1: Classification of areas \x96 Explosive gas atmospheres | |
| Explosive atmospheres \x96 Part 11: Equipment protection by intrinsic safety "i" CORRIGENDUM 1 | |
| EXPLOSIVE ATMOSPHERES \x96 Part 11: Equipment protection by intrinsic safety "i" INTERPRETATION SHEET 1 | |
| Explosive atmospheres \x96 Part 11: Equipment protection by intrinsic safety "i" INTERPRETATION SHEET 2 | |
| Explosive atmospheres \x96 Part 11: Equipment protection by intrinsic safety "i" INTERPRETATION SHEET 3 | |
| EXPLOSIVE ATMOSPHERES \x96 Part 11: Equipment protection by intrinsic safety "i" INTERPRETATION SHEET 4 | |
| EXPLOSIVE ATMOSPHERES \x96 Part 11: Equipment protection by intrinsic safety "i" INTERPRETATION SHEET 5 | |
| EXPLOSIVE ATMOSPHERES \x96 Part 11: Equipment protection by intrinsic safety "i" INTERPRETATION SHEET 6 | |
| Explosive atmospheres \x96 Part 11: Equipment protection by intrinsic safety "i" | |
| EXPLOSIVE ATMOSPHERES \x96 Part 14: Electrical installations design, selection and erection | |
| EXPLOSIVE ATMOSPHERES \x96 Part 15: Equipment protection by type of protection "n" | |
| Explosive atmospheres \x96 Part 17: Electrical installations inspection and maintenance | |
| Explosive atmospheres \x96 Part 18: Equipment protection by encapsulation "m" (Commented Version) | |
| Explosive atmospheres \x96 Part 18: Equipment protection by encapsulation \x93m\x94 | |
| EXPLOSIVE ATMOSPHERES \x96 Part 1: Equipment protection by flameproof enclosures "d" | |
| Explosive atmospheres \x96 Part 20-1: Material characteristics for gas and vapour classification \x96 Test methods and data | |
| Explosive atmospheres \x96 Part 20-1: Material characteristics for gas and vapour classification \x96Test methods and data | |
| Fifteenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Fifteenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | |
| Fifteenth supplement to publichation 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Fifth supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves | |
| Fifth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Fifth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Fifth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| First supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves | |
| First supplement to Publication 61 (1962) Lamp caps and holders together with gauges for the control of interchangeability and safety | |
| First supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| First supplement to publication 61-2 (1969) - Lamps caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders | |
| First supplement to Publication 61-3 (1969) - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | |
| First supplement to Publication 61-4 (1990) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | |
| First Supplement to publication 68-2-10 (1968) Basic environmental testing procedures Part 2: Tests - Test J: Mould growth | |
| First supplement to Publication 79-1 (1971) Electrical apparatus for explosive gas atmospheres Part 1L Construction and test of flameproof enclosures of electical apparatus Appendix D: Method of test for ascertainment... | |
| FIRST SUPPLEMENT TO PUBLICATION NO 61 International Recommendations Regarding Lamp Caps and Holders together with gauges for the control of Interchangeability | |
| First Supplement to publication to 60068-3-1 Basic Environmental Testing Procedures Part 3: Background Information Section One - Cold and Dry Heat Tests | |
| Fourteenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Fourteenth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Fourteenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| Fourth supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves | |
| Fourth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Fourth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Fourth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| Fourth supplement to Publication 61-4 (1990) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | |
| High-voltage alternating-current circuit-breakers - Part 2: Rating | |
| High-voltage alternating-current circuit-breakers - Part 4: Type tests and routine tests | |
| HIGH-VOLTAGE ALTERNATING-CURRENT CIRCUIT-BREAKERS | |
| HIGH-VOLTAGE TEST TECHNIQUES - PART 1: GENERAL DEFINITIONS AND TEST REQUIREMENTS | |
| HIGH-VOLTAGE TEST TECHNIQUES - PART 2: MEASURING SYSTEMS | |
| High-voltage test techniques \x96 Part 1: General terminology and test requirements | |
| High-voltage test techniques \x96 Part 2: Measuring systems | |
| High-Voltage Test Techniques Part 3: Definitions and requirements for on-site testing | |
| High-Voltage Test Techniques Part 4: Application Guide for Measuring Devices | |
| IEC Standard Current Ratings | |
| INSULATION CO-ORDINATION - PART 1: DEFINITIONS, PRINCIPLES AND RULES | |
| Insulation co-ordination \x96 Part 11: Definitions, principles and rules for HVDC system | |
| Insulation co-ordination \x96 Part 12: Application guidelines for LCC HVDC converter stations | |
| Insulation co-ordination \x96 Part 1: Definitions, principles and rules | |
| Insulation co-ordination \x96 Part 2: Application guidelines | |
| Insulation co-ordination \x96 Part 5: Procedures for high-voltage direct current (HVDC) converter stations | |
| INSULATION CO-ORDINATION Part 11: Definitions, principles and rules for HVDC system | |
| Insulation Co-Ordination Part 2: Application Guide | |
| Insulation Co-Ordination Part 3: Phase-To-Phase Insulation Co-Ordination Principles, Rules and Application Guide | |
| INSULATION CO-ORDINATION SERIES | |
| International Recommendations Regarding Lamp Caps and Holders together with gauges for the control of Interchangeability | |
| INTERNATIONAL SPECIFICATION FOR TUNGSTEN FILAMENT LAMPS FOR GENERAL SERVICE | |
| LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 1: LAMP CAPS | |
| LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY - PART 3: GAUGES | |
| LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY \x96 Part 1: Lamp caps | |
| LAMP CAPS AND HOLDERS TOGETHER WITH GAUGES FOR THE CONTROL OF INTERCHANGEABILITY AND SAFETY \x96 Part 2: Lampholders | |
| Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 2: Lampholders | |
| Lamp Caps and Holders Together with Gauges for the Control of Interchangeability and Safety Part 4: Guidelines and General Information | |
| MARKING CODES FOR RESISTORS AND CAPACITORS | |
| National Differences For UL 60079-15 Explosive atmospheres \x96 Part 15: Equipment protection by type of protection "n" | |
| Nineteenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps | |
| Nineteenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | |
| Ninth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Ninth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Ninth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| PAPER-INSULATED METAL-SHEATHED CABLES FOR RATED VOLTAGES UP TO 18/30 KV (WITH COPPER OR ALUMINIUM CONDUCTORS AND EXCLUDING GAS- PRESSURE AND OIL-FILLED CABLES)- PART 2: GENERAL AND CONSTRUCTION REQUIREMENTS | |
| Paper-Insulated Metal-Sheathed Cables for Rated Voltages up to 18/30 kV (with Copper or Aluminium Conductors and Excluding Gas-Pressure and Oil-Filled Cables) Part 1: Tests on Cables and their Accessories | |
| Power Rating for Helical and Herringbone Gearing for Rolling Mill Service | |
| Power Transformers - Application Guide | |
| Power Transformers - Part 10: Determination of Sound Levels | |
| Power transformers - Part 11: Dry-type transformers | |
| Power Transformers - Part 16: Transformers for Wind Turbine Application | |
| POWER TRANSFORMERS - PART 1: GENERAL | |
| Power transformers - Part 22-1: Power transformer and reactor fittings - Protective devices | |
| Power transformers - Part 22-2: Power transformer and reactor fittings - Removable radiators | |
| POWER TRANSFORMERS - PART 2: TEMPERATURE RISE FOR LIQUID-IMMERSED TRANSFORMERS | |
| POWER TRANSFORMERS - PART 3: INSULATION LEVELS, DIELECTRIC TESTS AND EXTERNAL CLEARANCES IN AIR | |
| POWER TRANSFORMERS - PART 5: ABILITY TO WITHSTAND SHORT CIRCUIT | |
| POWER TRANSFORMERS \x96 Part 11: Dry-type transformers | |
| Power transformers \x96 Part 12: Loading guide for dry-type power transformers | |
| Power transformers \x96 Part 13: Self-protected liquid-filled transformers | |
| Power transformers \x96 Part 14: Liquid-immersed power transformers using high-temperature insulation materials | |
| Power transformers \x96 Part 15: Gas-filled power transformers | |
| Power transformers \x96 Part 18: Measurement of frequency response | |
| Power transformers \x96 Part 19-1: Rules for the determination of uncertainties in the measurement of the losses of power transformers | |
| Power transformers \x96 Part 21: Standard requirements, terminology, and test code for step-voltage regulators | |
| Power transformers \x96 Part 22-3: Power transformer and reactor fittings \x96 Insulating liquid to air heat exchangers | |
| Power transformers \x96 Part 22-4: Power transformer and reactor fittings \x96 Insulating liquid to water heat exchangers | |
| Power transformers \x96 Part 22-5: Power transformer and reactor fittings \x96 Electric pumps for transformers | |
| Power transformers \x96 Part 22-6: Power transformer and reactor fittings \x96 Electric fans for transformers | |
| Power transformers \x96 Part 22-7: Power transformer and reactor fittings \x96 Accessories and fittings | |
| Power transformers \x96 Part 22-8: Power transformer and reactor fittings \x96 Devices suitable for use in communication networks | |
| Power transformers \x96 Part 24: Specification of voltage regulating distribution transformers (VRDT) | |
| Power transformers \x96 Part 25: Neutral grounding resistors | |
| Power transformers \x96 Part 57-1202: Liquid immersed phase-shifting transformers | |
| Power transformers \x96 Part 57-129: Transformers for HVDC applications | |
| Power transformers \x96 Part 6: Reactors | |
| Power transformers \x96 Part 7: Loading guide for mineral-oil-immersed power transformers | |
| Power transformers Part 10-1: Determination of sound levels Application guide | |
| Power Transformers Part 3: Insulation Levels and Dielectric Tests External Clearances in Air | |
| Power Transformers Part 4: Tappings and Connections | |
| Power transformers Part 7: Loading guide for oil-immersed power transformers | |
| Preferred Number Series for Resistors and Capacitors | |
| Railway Applications - Electric Equipment for Rolling Stock - Part 1: General Service Conditions and General Rules | |
| Railway Applications - Electric Equipment for Rolling Stock - Part 2: Electrotechnical Components - General Rules | |
| Railway Applications - Electric Equipment for Rolling Stock - Part 3: Electrotechnical Components - Rules for d.c. Circuit-Breakers | |
| Railway applications \x96 Electric equipment for rolling stock \x96 Part 2: Electrotechnical components \x96 General rules | |
| Railway Applications \x96 Electric equipment for rolling stock \x96 Part 3: Electrotechnical components \x96 Rules for DC circuit-breakers | |
| Railway applications \x96 Electric equipment for rolling stock \x96 Part 4: Electrotechnical components \x96 Rules for AC circuit-breakers | |
| Railway applications \x96 Electric equipment for rolling stock \x96 Part 5: Electrotechnical components \x96 Rules for HV fuses | |
| Railway applications Electric equipment for rolling stock Part 4: Electrotechnical components Rules for AC circuit-breakers | |
| Railway applications Electric equipment for rolling stock Part 5: Electrotechnical components Rules for HV fuses | |
| Recommendations for Voltage Measurement by Means of Sphere-Gaps (One Sphere Earthed) | |
| REDLINE VERSION Explosive atmospheres \x96 Part 10-2: Classification of areas \x96 Explosive dust atmospheres | |
| Rules for Electric Traction Equipment Second Edition | |
| Second supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves | |
| Second supplement to Publication 61 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety | |
| Second supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Second supplement to publication 61-2 (1969) - Lamps caps and holders together with gauges for the control of interchangeability and safety. Part 2: Lampholders | |
| Second supplement to publication 61-3 (1969) - Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | |
| Second supplement to Publication 61-4 (1990) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | |
| SECOND SUPPLEMENT TO PUBLICATION NO 61 International Recommendations Regarding Lamp Caps and Holders together with gauges for the control of Interchangeability | |
| Seventeenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps | |
| Seventeenth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders | |
| Seventeenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | |
| Seventh supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Seventh supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Seventh supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| Sixteenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps | |
| Sixteenth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders | |
| Sixteenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 3: Gauges | |
| Sixth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Sixth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| Standard for Design and Specification of Gearboxes for Wind Turbines | |
| Standard for Design and Specifications of Gearboxes for Wind Turbines | |
| Tenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Tenth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Tenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| TEST METHODS TEST EF: IMPACT, PENDULUM HAMMER | |
| Third supplement to Publication 60067 (1966) Dimensions of electronic tubes and valves | |
| Third supplement to Publication 61 (1962) Lamp caps and holders together with gauges for the control of interchangeability and safety | |
| Third supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Third supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Third supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| Third supplement to Publication 61-4 (1990) Lamp caps and holders together with gauges for the control of interchangeability and safety. Part 4: Guidelines and general information | |
| THIRD SUPPLEMENT TO PUBLICATION NO 61 International Recommendations Regarding Lamp Caps and Holders together with gauges for the control of Interchangeability | |
| Thirteenth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Thirteenth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Thirteenth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| Tungsten filament lamps for domestic and similar general lighting purposes \x96 Performance requirements | |
| Twelfth supplement to Publication 61-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| Twelfth supplement to Publication 61-3 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges | |
| Twelth supplement to Publication 61-2 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders | |
| Twentieth supplement to Publication 60061-1 (1969) Lamp caps and holders together with gauges for the control of interchangeability and safety \x96 Part 1: Lamp caps | |
| UL Standard for Safety Audio, Video and Similar Electronic Apparatus - Safety Requirements | |
| UL Standard for Safety Explosive Atmospheres - Part 2: Equipment Protection by Pressurized Enclosure \x93p\x94 | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 10-1: Classification of Areas \x96 Explosive Gas Atmospheres | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 10-2: Classification of Areas \x96 Explosive Dust Atmospheres | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 11: Equipment Protection by Intrinsic Safety "i" | |
| UL Standard for Safety Explosive Atmospheres \x96 Part 13: Equipment Protection by Pressurized Room "p" and Artificially Ventilated Room "v" | |
| UL Standard for safety Explosive Atmospheres \x96 Part 17: Electrical Installations Inspection and Maintenance |
| << Prev | Next >> |