AENOR Datasheets for Standards and Technical Documents
Standards and technical documents includes standards, codes, regulation, handbooks, manuals, comprehensive guides and other formal publications. Standards, codes, and regulation establish uniform specifications, procedures or technical criteria.
Standards and Technical Documents: Learn more
Page:
1
50
90
100
110
120
130
140
146
147
148
149
150
151
152
153
154
155
156
157
158
160
170
180
181
| Product Name | Notes |
|---|---|
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying accurate environmental corrections (ISO 11204:2010)... | |
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections (ISO 11202:2010)... | |
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions applying approximate environmental corrections - Amendment... | |
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level (ISO... | |
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions from the sound power level -... | |
| Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over... | |
| Acoustics - Noise emitted by machinery and equipment - Engineering method for the determination of emission sound pressure levels in situ at the work station and at other specified positions... | |
| Acoustics - Noise emitted by machinery and equipment - Guidelines for the use of basic standards for the determination of emission sound pressure levels at a work station and at... | |
| Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Engineering method in an essentially... | |
| Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Method requiring environmental corrections (ISO... | |
| Acoustics - Noise emitted by machinery and equipment - Measurement of emission sound pressure levels at a work station and at other specified positions - Survey method in situ (ISO... | |
| ACOUSTICS. NOISE EMITTED BY MACHINERY AND EQUIPMENT. DETERMINATION OF emission sound pressure levels at a work station and at other specified positions from the sound power level. (ISO 11203:1995). | |
| ACOUSTICS. NOISE EMITTED BY MACHINERY AND EQUIPMENT. GUIDELINES FOR THE USE OF BASIC STANDARDS FOR THE DETERMINATION OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED... | |
| ACOUSTICS. NOISE EMITTED BY MACHINERY AND EQUIPMENT. MEASUREMENT OF EMission sound pressure levels at a work station and at other specified positions. Engineering method in and essentially free field over... | |
| ACOUSTICS. NOISE EMITTED BY MACHINERY AND EQUIPMENT. MEASUREMENT OF EMISSION SOUND PRESSURE LEVELS AT A WORK STATION AND AT OTHER SPECIFIED POSITIONS. METHOD REQUIRING ENVIRONMENTAL CORRECTIONS. (ISO 11204:1995). | |
| ACUSTICS. NOISE EMITTED BY MACHINERY AND EQUIPMENT. MEASUREMENT OF EMIssion sound pressure levels at a work station and at other specified positions. Survey method in situ. (ISO 11202:1995). | |
| Adhesives - Determination of dynamic resistance to cleavage of high-strength adhesive bonds under impact conditions - Wedge impact method (ISO 11343:2003) | |
| Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2003) | |
| Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2010) | |
| Adhesives - T-peel test for flexible-to-flexible bonded assemblies (ISO 11339:2022) | |
| ANAESTHETIC GAS MONITORS. (ISO 11196:1995 INCLUDING TECHNICAL CORRIGENDUM 1:1997). | |
| Assistive products for walking manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:2021) | |
| Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2021) (Endorsed by Asociación Española de Normalización in October of 2021.) | |
| Assistive products for walking manipulated by both arms - Requirements and test methods - Part 2: Rollators - Amendment 1: Removal of brake requirements (ISO 11199 2:2021/Amd 1:2024) (Endorsed by... | |
| Assistive products for walking manipulated by one arm - Requirements and test methods - Part 1: Elbow crutches (ISO 11334-1:2007) | |
| Assistive products for walking, manipulated by one arm - Requirements and test methods - Part4: Walking sticks with three or more legs (ISO 11334-4:2024) | |
| Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2006) | |
| Biological evaluation of medical devices - Part 11: Tests for systemic toxicity (ISO 10993-11:2017) | |
| Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2002) | |
| Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2007) | |
| Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2012) | |
| Biological evaluation of medical devices - Part 12: Sample preparation and reference materials (ISO 10993-12:2021) | |
| Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:1998) | |
| Biological evaluation of medical devices - Part 13: Identification and quantification of degradation products from polymeric medical devices (ISO 10993-13:2010) | |
| Biological evaluation of medical devices - Part 14: Identification and quantification of degradation products from ceramics (ISO 10993-14:2001) | |
| Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2000) | |
| Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys (ISO 10993-15:2019) | |
| Biological evaluation of medical devices - Part 15: Identification and quantification of degradation products from metals and alloys. (ISO 10993-15:2000) | |
| Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:1997) | |
| Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2010) | |
| Biological evaluation of medical devices - Part 16: Toxicokinetic study design for degradation products and leachables (ISO 10993-16:2017) | |
| Biological evaluation of medical devices - Part 17: Establishment of allowable limits for leachable substances (ISO 10993-17:2002) | |
| Biological evaluation of medical devices - Part 17: Toxicological risk assessment of medical device constituents (ISO 10993-17:2023) | |
| Biological evaluation of medical devices - Part 18: Chemical characterization of materials (ISO 10993-18:2005) | |
| Biological evaluation of medical devices - Part 18: Chemical characterization of medical device materials within a risk management process (ISO 10993-18:2020) | |
| Biological evaluation of medical devices - Part 18: Chemical characterization of medical device materials within a risk management process - Amendment 1: Determination of the uncertainty factor (ISO 10993-18:2020/Amd 1:2022)... | |
| Biological evaluation of medical devices - Part 1: Evaluation and testing (ISO 10993-1:2003) | |
| Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process (ISO 10993-1:2009) | |
| Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process (ISO 10993-1:2018, including corrected version 2018-10) | |
| Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process - Technical Corrigendum 1 (ISO 10993-1:2009/Cor 1:2010) | |
| Biological evaluation of medical devices - Part 23: Tests for irritation (ISO 10993-23:2021) | |
| Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO 10993-2:2006) | |
| Biological evaluation of medical devices - Part 2: Animal welfare requirements (ISO 10993-2:2022) | |
| Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2003) | |
| Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO 10993-3:2014) | |
| Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002) | |
| Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2002, including Amd 1:2006) | |
| Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017) | |
| Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood - Amendment 1 (ISO 10993-4:2002/Amd 1:2006) | |
| Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood - Amendment 1 (ISO 10993-4:2017/Amd 1:2025, Corrected version 2025-04) | |
| Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity (ISO 10993-5:2009) | |
| Biological evaluation of medical devices - Part 5: Tests for in vitro cytotoxicity | |
| Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2007) | |
| Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO 10993-6:2016) | |
| Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals (ISO 10993-7:2008) | |
| Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Amendment 1: Applicability of allowable limits for neonates and infants (ISO 10993-7:2008/Amd 1:2019) | |
| Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Technical Corrigendum 1 (ISO 10993-7:2008/Cor 1:2009) | |
| Biological evaluation of medical devices - Part 8: Selection and qualification of reference materials for biological tests. (ISO 10993-8:2000) | |
| Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:1999) | |
| Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2009) | |
| Biological evaluation of medical devices - Part 9: Framework for identification and quantification of potential degradation products (ISO 10993-9:2019) | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 12: SAMPLE PREPARATION AND REFERENCE MATERIALS. (ISO 10993-12:1996). | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 13: IDENTIFICATION AND QUANTIFICATION OF DEGRADATION PRODUCTS FROM POLYMERIC MEDICAL DEVICES (ISO 10993-13:1998) | |
| Biological evaluation of medical devices. Part 14: Identification and quantification of degradation products from ceramics. (ISO 10993-14:2001) | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 16: TOXICOKINETIC STUDY DESIGN FOR DEGRADATION PRODUCTS AND LEACHABLES. (ISO 10993-16:1997). | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 1: EVALUATION AND TESTING. (ISO 10993-1:1997). | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 2: ANIMAL WELFARE REQUIREMENTS. (ISO 10993-2:1992). | |
| Biological evaluation of medical devices. Part 3: Tests for genotoxicity, carcinogenicty and reproductive toxicity (ISO10993-3:2003) | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 5: TESTS FOR IN VITRO CYTOTOXICITY (ISO 10993-5:1999) | |
| Biological evaluation of medical devices. Part 5: Tests for in vitro cytotoxicity. (ISO 10993-5:1999) | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 7: ETHYLENE OXIDE STERILIZATIONN RESIDUALS. (ISO 10993-7:1995). | |
| BIOLOGICAL EVALUATION OF MEDICAL DEVICES. PART 9: FRAMEWORK FOR IDENTIFICATION AND QUANTIFICATION OF POTENTIAL DEGRADATION PRODUCTS (ISO 10993-9:1999) | |
| BIOLOGICAL EVAULATION OF MEDICAL DEVICES. PART 7: ETHYLENE OXIDE STERILIZATION RESIDUALS. (ISO 10993-7:1995). | |
| Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total content by the Randall extraction method (ISO 11085:2008) | |
| Cereals, cereals-based products and animal feeding stuffs - Determination of crude fat and total fat content by the Randall extraction method (ISO 11085:2015) | |
| Classification and information on design and applications of plastics piping systems used for renovation and replacement (ISO 11295:2017) | |
| Classification and information on design of plastics piping systems used for renovation (ISO 11295:2010) | |
| Compressed air - Energy efficiency - Assessment (ISO 11011:2013) | |
| CONSTRUCTION DRAWINGS. LANDSCAPE DRAWING PRACTICE (ISO 11091:1994) | |
| Conveyor belts - Determination of strength of mechanical fastenings - Static test method (ISO 1120:2012) | |
| Conveyor belts - Determination of strength of mechanical fastenings for textile conveyor belts - Static test method (ISO 1120:2025) (Endorsed by Asociación Española de Normalización in November of 2025.) | |
| Conveyor belts. Determination of strength of mechanical fastenings. Static test method. (ISO 1120:2002) | |
| CORROSION OF METALS AND ALLOYS - ALTERNATE IMMERSION TEST IN SALT SOLUTION (ISO 11130:1999). | |
| Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2010) | |
| Corrosion of metals and alloys - Alternate immersion test in salt solution (ISO 11130:2017) | |
| Corrosion of metals and alloys - Guidelines for selection of protection methods against atmospheric corrosion (ISO 11303:2002) | |
| Corrosion of metals and alloys. Alternate immersion test in salt solution. (ISO 11130:1999). | |
| CORROSION OF METALS AND ALLOYS. GUIDELINES FOR EXPOSING AND EVALUATING METALS AND ALLOYS IN SURFACE SEA WATER. (ISO 11306:1998). | |
| Cycles - Luggage carriers for bicycles - Requirements and test methods (ISO 11243:2016) | |
| Cycles - Luggage carriers for bicycles - Requirements and test methods (ISO 11243:2023) (Endorsed by Asociación Española de Normalización in October of 2023.) | |
| DENTAL BRAZING INVESTMENTS. (ISO 11244:1998) | |
| DENTAL EQUIPMENT - AMALGAM SEPARATORS (ISO 11143:1999) | |
| Dental equipment - Amalgam separators. (ISO 11143:1999/Cor.1:200 2) | |
| DENTAL EQUIPMENT. CONNECTIONS FOR SUPPLY AND WASTE LINES. (ISO 11144:1995). | |
| DENTAL ETHYL SILICATE BONDED CASTING INVESTMENTS (ISO 11246:1996) | |
| Dental restorations. Phosphate-bonded refractory die materials. (ISO 11245:1999) | |
| Dentistry - Amalgam separators (ISO 11143:2008) | |
| Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:1995) | |
| Durum wheat flour and semolina - Determination of yellow pigment content (ISO 11052:1994) | |
| Environmental solid matrices - Determination of the specific electrical conductivity (ISO 11265:2025) (Endorsed by Asociación Española de Normalización in October of 2025.) | |
| Ergonomic design of control centres - Part 1: Principles for the design of control centres. (ISO 11064-1:2000) | |
| Ergonomic design of control centres - Part 2: Principles for the arrangement of control suites. (ISO 11064-2:2000) | |
| Ergonomic design of control centres - Part 3: Control room layout. (ISO 11064-3:1999) | |
| Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2004) | |
| Ergonomic design of control centres - Part 4: Layout and dimensions of workstations (ISO 11064-4:2013) (Endorsed by AENOR in April of 2015.) | |
| Ergonomic design of control centres - Part 5: Displays and controls (ISO 11064-5:2008) (Endorsed by AENOR in December of 2009.) | |
| Ergonomic design of control centres - Part 6: Environmental requirements for control centres (ISO 11064-6:2005) | |
| Ergonomic design of control centres - Part 7: Principles for the evaluation of control centres (ISO 11064-7:2006) | |
| Ergonomic design of control centres. Part 3: Control room layout. (ISO 11064-3:1999) | |
| Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007) (Endorsed by AENOR in September of... | |
| Ergonomics of the thermal environment - Determination and interpretation of cold stress when using required clothing insulation (IREQ) and local cooling effects (ISO 11079:2007) | |
| Fishing nets - Netting - Basic terms and definitions (ISO 1107:2003) | |
| Fishing nets - Netting - Basic terms and definitions (ISO 1107:2017) | |
| GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 1: SPECIFICATIONS (ISO 11116-1:1999) | |
| GAS CYLINDERS - 17E TAPER THREAD FOR CONNECTION OF VALVES TO GAS CYLINDERS - PART 2: INSPECTION GAUGES (ISO 11116-2:1999). | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2012) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials (ISO 11114-1:2020) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2012/Amd 1:2017) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 1: Metallic materials - Amendment 1 (ISO 11114-1:2020/Amd 1:2023) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2013) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials (ISO 11114-2:2021) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 3: Autogenous ignition test for non-metallic materials in oxygen atmosphere (ISO 11114-3:2010) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 5: Test methods for evaluating plastic liners (ISO 11114-5:2022) | |
| Gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 6: Oxygen pressure surge testing (ISO 11114-6:2022) | |
| Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2015) | |
| Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods (ISO 11118:2025) | |
| Gas cylinders - Non-refillable metallic gas cylinders - Specification and test methods - Amendment 1 (ISO 11118:2015/Amd 1:2019) | |
| Gas cylinders - Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l - Design construction and testing - Amendment 1: Requirements for... | |
| Gas cylinders - Refillable seamless steel tubes of water capacity between 150 l and 3000 l - Design, construction and testing (ISO 11120:2015) | |
| Gas cylinders - Valve protection caps and guards - Design, construction and tests (ISO 11117:2019) | |
| Gas cylinders - Valve protection caps and valve guards - Design, construction and tests (ISO 11117:2008) | |
| Gas cylinders - Valve protection caps and valve guards - Design, construction and tests - Technical Corrigendum 1 (ISO 11117:2008/Cor 1:2009) | |
| GAS CYLINDERS. REFILLABLE SEAMLESS STEEL TUBES FOR COMPRESSED GAS TRANSPORT, OF WATER CAPACITY BETWEEN 150 L AND 3000 L - DESIGN CONSTRUCTION AND TESTING (ISO 11120:1999). | |
| Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013) (Endorsed by AENOR in April of 2013.) | |
| Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Geometrical product specifications (GPS) - Series of conical tapers and taper angles (ISO 1119:2011) | |
| Geometrical product specifications (GPS). Series of conical tapers and taper angles. (ISO 1119:1998) | |
| GEOTEXTILES AND GEOTEXTILE RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD (ISO 11058:1999) | |
| Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010) | |
| Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2019) | |
| Hand-held non-electric power tools - Safety requirements - Part 10: Compression power tools (ISO 11148-10:2011) (Endorsed by AENOR in January of 2012.) | |
| Hand-held non-electric power tools - Safety requirements - Part 11: Nibblers and shears (ISO 11148-11:2011) (Endorsed by AENOR in January of 2012.) | |
| Hand-held non-electric power tools - Safety requirements - Part 12: Circular, oscillating and reciprocating saws (ISO 11148-12:2012) (Endorsed by AENOR in January of 2013.) | |
| Hand-held non-electric power tools - Safety requirements - Part 13: Fastener driving tools (ISO 11148-13:2017) (Endorsed by Asociación Española de Normalización in April of 2019.) | |
| Hand-held non-electric power tools - Safety requirements - Part 1: Assembly power tools for non-threaded mechanical fasteners (ISO 11148-1:2011) (Endorsed by AENOR in January of 2012.) | |
| Hand-held non-electric power tools - Safety requirements - Part 2: Cutting-off and crimping power tools (ISO 11148-2:2011) (Endorsed by AENOR in January of 2012.) | |
| Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2010) (Endorsed by AENOR in February of 2011.) | |
| Hand-held non-electric power tools - Safety requirements - Part 3: Drills and tappers (ISO 11148-3:2012) (Endorsed by AENOR in February of 2013.) | |
| Hand-held non-electric power tools - Safety requirements - Part 4: Nonrotary percussive power tools (ISO 11148-4:2010) (Endorsed by AENOR in February of 2011.) | |
| Hand-held non-electric power tools - Safety requirements - Part 4: Non-rotary percussive power tools (ISO 11148-4:2012) (Endorsed by AENOR in February of 2013.) | |
| Hand-held non-electric power tools - Safety requirements - Part 5: Rotary percussive drills (ISO 11148-5:2011) (Endorsed by AENOR in January of 2012.) | |
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2010) (Endorsed by AENOR in February of 2011.) | |
| Hand-held non-electric power tools - Safety requirements - Part 6: Assembly power tools for threaded fasteners (ISO 11148-6:2012) (Endorsed by AENOR in February of 2013.) | |
| Hand-held non-electric power tools - Safety requirements - Part 7: Grinders (ISO 11148-7:2012) (Endorsed by AENOR in October of 2012.) | |
| Hand-held non-electric power tools - Safety requirements - Part 8: Sanders and polishers (ISO 11148-8:2011) (Endorsed by AENOR in January of 2012.) | |
| Hand-held non-electric power tools - Safety requirements - Part 9: Die grinders (ISO 11148-9:2011) (Endorsed by AENOR in January of 2012.) | |
| Health informatics - Device interoperability - Part 10101: Point-of-care medical device communication - Nomenclature (ISO/IEEE 11073-10101:2020) (Endorsed by Asociación Española de Normalización in November of 2020.) | |
| Health informatics - Device interoperability - Part 20701: Point-of-care medical device communication - Service oriented medical device exchange architecture and protocol binding (ISO/IEEE 11073-20701:2020) (Endorsed by Asociación Española de Normalización... | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on pharmaceutical dose forms, units of presentation, routes of... | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on substances (ISO 11238:2012) | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of regulated information on substances (ISO 11238:2018) | |
| Health informatics - Identification of medicinal products - Data elements and structures for the unique identification and exchange of units of measurement (ISO 11240:2012) | |
| Health informatics - Personal health device communication - Part 00103: Overview (ISO/IEEE 11073-00103:2015) (Endorsed by Asociación Española de Normalización in April of 2017.) | |
| Health informatics - Personal health device communication - Part 10404: Device specialization - Pulse oximeter (ISO/IEEE 11073-10404:2010) (Endorsed by AENOR in April of 2011.) | |
| Health informatics - Personal health device communication - Part 10406: Device specialization - Basic electrocardiograph (ECG) (1- to 3-lead ECG) (ISO/IEEE 11073-10406:2012) (Endorsed by AENOR in January of 2013.) | |
| Health informatics - Personal health device communication - Part 10407: Device specialization - Blood pressure monitor (ISO/IEEE 11073-10407:2010) (Endorsed by AENOR in April of 2011.) | |
| Health informatics - Personal health device communication - Part 10408: Device specialization - Thermometer (ISO/IEEE 11073-10408:2010) (Endorsed by AENOR in April of 2011.) | |
| Health informatics - Personal health device communication - Part 10415: Device specialization - Weighing scale (ISO/IEEE 11073-10415:2010) (Endorsed by AENOR in April of 2011.) | |
| Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter (ISO/IEEE 11073-10417:2010) (Endorsed by AENOR in April of 2011.) | |
| Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter (ISO/IEEE 11073-10417:2014, Corrected version 2014-06-01) (Endorsed by AENOR in April of 2014.) | |
| Health informatics - Personal health device communication - Part 10417: Device specialization - Glucose meter (ISO/IEEE 11073-10417:2017) (Endorsed by Asociación Española de Normalización in June of 2017.) | |
| Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor (ISO/IEEE 11073-10418:2014) (Endorsed by AENOR in April of 2014.) | |
| Health informatics - Personal health device communication - Part 10418: Device specialization - International Normalized Ratio (INR) monitor - Technical Corrigendum 1 (ISO/IEEE 11073-10418:2014/Cor 1:2016) (Endorsed by AENOR in December... | |
| Health informatics - Personal health device communication - Part 10419: Device specialization - Insulin pump (ISO/IEEE 11073-10419:2016, Corrected version 2018-03) | |
| Health informatics - Personal health device communication - Part 10420: Device specialization - Body composition analyzer (ISO 11073-10420:2012) (Endorsed by AENOR in January of 2013.) | |
| Health informatics - Personal health device communication - Part 10421: Device specialization - Peak expiratory flow monitor (peak flow) (ISO 11073-10421:2012) (Endorsed by AENOR in January of 2013.) | |
| Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep apnoea breathing therapy equipment (SABTE) (ISO/IEEE 11073-10424:2016) (Endorsed by AENOR in August of 2016.) | |
| Health informatics - Personal health device communication - Part 10424: Device specialization - Sleep apnoea breathing therapy equipment (SABTE) - Technical Corrigendum 1 (ISO/IEEE 11073-10424:2016/Cor 1:2018) (Endorsed by Asociación Española... | |
| Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) (ISO 11073-10425:2016) (Endorsed by AENOR in August of 2016.) | |
| Health informatics - Personal health device communication - Part 10425: Device specialization - Continuous glucose monitor (CGM) (ISO/IEEE 11073-10425:2019) (Endorsed by Asociación Española de Normalización in June of 2019.) | |
| Health informatics - Personal health device communication - Part 10427: Device specialization - Power status monitor of personal health devices(ISO/IEEE 11073-10427:2018) (Endorsed by Asociación Española de Normalización in April of... | |
| Health informatics - Personal health device communication - Part 10441: Device specialization - Cardiovascular fitness and activity monitor (ISO/IEEE 11073-10441:2015) (Endorsed by Asociación Española de Normalización in April of 2017.)... | |
| Health informatics - Personal health device communication - Part 10442: Device specialization - Strength fitness equipment (ISO/IEEE 11073-10442:2015, Corrected version 2017-11-01) | |
| Health Informatics - Personal health device communication - Part 10471: Device specialization - Independant living activity hub (ISO/IEEE 11073-10471:2010) (Endorsed by AENOR in April of 2011.) | |
| Health Informatics - Personal health device communication - Part 10472: Device specialization - Medication monitor (ISO 11073-10472:2012) | |
| Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2010) (Endorsed by AENOR in April of 2011.) | |
| Health informatics - Personal health device communication - Part 20601: Application profile - Optimized exchange protocol (ISO/IEEE 11073-20601:2016, including Cor 1:2016) (Endorsed by AENOR in October of 2016.) | |
| Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature (ISO/IEEE 11073-10101:2004) (Endorsed by AENOR in October of 2005.) | |
| Health informatics - Point-of-care medical device communication - Part 10101: Nomenclature - Amendment 1: Additional definitions (ISO/IEEE 11073-10101:2004/Amd 1:2017) (Endorsed by Asociación Española de Normalización in January of 2018.) | |
| Health informatics - Point-of-care medical device communication - Part 10102: Nomenclature - Annotated ECG (ISO/IEEE 11073-10102:2014) (Endorsed by AENOR in April of 2014.) | |
| Health informatics - Point-of-care medical device communication - Part 10103: Nomenclature - Implantable device, cardiac (ISO/IEEE 11073-10103:2014, Corrected version 2014-05-01) | |
| Health informatics - Point-of-care medical device communication - Part 10201: Domain information model (ISO/IEEE 11073-10201:2004) | |
| Health informatics - Point-of-care medical device communication - Part 20101: Application profiles - Base standard (ISO/IEEE 11073-20101:2004) (Endorsed by AENOR in October of 2005.) | |
| Health informatics - Point-of-care medical device communication - Part 30200: Transport profile - Cable connected (ISO/IEEE 11073-30200:2004) (Endorsed by AENOR in October of 2005.) | |
| Health informatics - Point-of-care medical device communication - Part 30200: Transport profile - Cable connected - Amendment 1 (ISO/IEEE 11073-30200:2004/Amd 1:2015) (Endorsed by AENOR in November of 2015.) | |
| Health informatics - Point-of-care medical device communication - Part 30300: Transport profile - Infrared wireless (ISO/IEEE 11073-30300:2004) (Endorsed by AENOR in October of 2005.) | |
| Health informatics - Point-of-care medical device communication - Part 30400: Interface profile - Cabled Ethernet (ISO 11073-30400:2012) (Endorsed by AENOR in January of 2013.) | |
| Jewellery - Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate (ISO 11210:2014) (Endorsed by AENOR in December of 2016.) | |
| Jewellery and precious metals - Determination of platinum - Gravimetry using ammonium chloride (ISO 11210:2023) (Endorsed by Asociación Española de Normalización in April of 2023.) | |
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 2: S-on-1 test (ISO 11254-2:2001) | |
| Lasers and laser-related equipment - Determination of laser-induced damage threshold of optical surfaces - Part 3: Assurance of laser power (energy) handling capabilities (ISO 11254-3:2006) | |
| Lasers and laser-related equipment - Determination of laser-induced damaged threshold of optical surfaces - Part 1: 1 on 1 test. (ISO 11254-1:2000) | |
| Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2004) | |
| Lasers and laser-related equipment - Laser device - Minimum requirements for documentation (ISO 11252:2013) | |
| Lasers and laser-related equipment - Standard optical components - Part 1: Components for the UV, visible and near-infrared spectral ranges (ISO 11151-1:2015) | |
| Lasers and laser-related equipment - Standard optical components - Part 2: Components for the infrared spectral range (ISO 11151-2:2015) | |
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2005) | |
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 1: Stigmatic and simple astigmatic beams (ISO 11146-1:2021) (Endorsed by Asociación... | |
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2005) | |
| Lasers and laser-related equipment - Test methods for laser beam widths, divergence angles and beam propagation ratios - Part 2: General astigmatic beams (ISO 11146-2:2021) (Endorsed by Asociación Española de... | |
| Lasers and laser-related equipment -- Standard optical components -- Part 1: Components for the UV, visible and near-infrared spectral ranges. (ISO 11151-1:2000) | |
| Lasers and laser-related equipment -- Standard optical components -- Part 2: Components for the infrared spectral range. (ISO 11151-2:2000). | |
| LASERS AND LASER-RELATED EQUIPMENT. TEST METHODS FOR LASER BEAM PARAMETERS. BEAM WIDTHS, DIVERGENCE ANGLE AND BEAM PROPAGATION FACTOR (ISO 11146:1999) | |
| Medical supply units (ISO 11197:2004) | |
| Medical supply units (ISO 11197:2016) | |
| Medical supply units (ISO 11197:2019) | |
| Medical supply units. (ISO 11197:2004) | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 1: Detection method (ISO 11290-1:1996) | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 1: Detection method - Amendment 1: Modification of the isolation... | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method (ISO 11290-2:1998) | |
| Microbiology of food and animal feeding stuffs - Horizontal method for the detection and enumeration of Listeria monocytogenes - Part 2: Enumeration method - Amendment 1: Modification of the enumeration... | |
| Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media (ISO 11133:2014) | |
| Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media - Amendment 1 (ISO 11133:2014/Amd 1:2018) | |
| Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media - Amendment 2 (ISO 11133:2014/Amd 2:2020) | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 1: Detection method (ISO 11290-1:2017) | |
| Microbiology of the food chain - Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp. - Part 2: Enumeration method (ISO 11290-2:2017) | |
| MODIFIED STARCH. DETERMINATION OF ACETYL CONTENT. ENZYMATIC METHOD. (ISO 11213:1995). | |
| MODIFIED STARCH. DETERMINATION OF ADIPIC ACID CONTENT OF ACETYLATED DI-STARCH ADIPATES. GAS-CHROMATOGRAPHIC METHOD (ISO 11215:1998) | |
| MODIFIED STARCH. DETERMINATION OF CARBOXYL GROUP CONTENT OF OXIDIZED STARCH. (ISO 11214:1996). | |
| MODIFIED STARCH. DETERMINATION OF CONTENT OF CARBOXYMETHYL GROUPS IN CARBOXYMETHYL STARCH (ISO 11216:1998) | |
| Optics and optcial instruments - Lasers and laser-related equipment - Vocabulary and symbols. (ISO 11145:2001) | |
| OPTICS AND OPTICAL INSTRUMENTS. LASERS AND LASER RELATED EQUIPMENT. VOCABULARY AND SYMBOLS. (ISO 11145:1994). | |
| OPTICS AND OPTICAL INSTRUMENTS. LASERS AND LASER-RELATED EQUIPMENT. FIBRE OPTIC CONNECTORS FOR NON-TELECOMMUNICATIO N LASER APPLICATIONS (ISO 11149:1997) | |
| Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2006) | |
| Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2016) (Endorsed by AENOR in May of 2016.) | |
| Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO 11145:2018) (Endorsed by Asociación Española de Normalización in February of 2019.) | |
| Paints and varnishes - Artificial weathering and exposure to artificial radiation - Exposure to filtered xenon-arc radiation (ISO 11341:2004) | |
| PAINTS AND VARNISHES. ARTIFICIAL WEATHERING AND EXPOSURE TO ARTIFICIAL RADIATION. EXPOSURE TO FILTERED XENON-ARC RADIATION. (ISO 11341:1994). | |
| Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2011) | |
| Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 1: Standard method (ISO 1133-1:2022) | |
| Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)... | |
| Plastics - Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoplastics (ISO 1133:2005) | |
| PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS. (ISO 1133:1997) | |
| PLASTICS - DETERMINATION OF THE MELT MASS-FLOW RATE (MFR) AND THE MELT VOLUME-FLOW RATE (MVR) OF THERMOPLASTICS. (ISO 1133:1998) | |
| Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:1995) | |
| Plastics - Polyamides - Accelerated conditioning of test specimens (ISO 1110:2019) | |
| Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2004) | |
| Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2004/Cor 1:2007) | |
| Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2010) | |
| Plastics - Polyamides - Determination of e-caprolactam and w-laurolactam by gas chromatography (ISO 11337:2023) | |
| PLASTICS - THERMOSETTING MOULDING MATERIALS - EVALUATION OF SHORT-TERM PERFORMANCE AT ELEVATED TEMPERATURES (ISO 11248:1993) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2013) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 1: General (ISO 11297-1:2018) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2018) | |
| Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 4: Lining with cured-in-place pipes (ISO 11297-4:2018) | |
| Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2011) | |
| Plastics piping systems for renovation of underground gas supply networks - Part 1: General (ISO 11299-1:2018) | |
| Plastics piping systems for renovation of underground gas supply networks - Part 2: Lining with continuous pipes (ISO 11299-2:2018) | |
| Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011) | |
| Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2009) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 1: General (ISO 11296-1:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2009+Cor 1:2011) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 3: Lining with close-fit pipes (ISO 11296-3:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2009, corrected version 2010-06-01) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes (ISO 11296-4:2018) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 4: Lining with cured-in-place pipes - Amendment 1: Updated definitions, marking requirements and procedure for alternative... | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2011) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 7: Lining with spirally-wound pipes (ISO 11296-7:2019) | |
| Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 9: Lining with a rigidly anchored plastics inner layer (ISO 11296-9:2022) | |
| Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2010) | |
| Plastics piping systems for renovation of underground water supply networks - Part 1: General (ISO 11298-1:2018) | |
| Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018) | |
| Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) | |
| Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2018) | |
| Plastics piping systems for renovation of underground water supply networks - Part 4: Lining with cured-in-place pipes (ISO 11298-4:2021) | |
| Plastics piping systems used for the rehabilitation of pipelines - Classification and overview of strategic, tactical and operational activities (ISO 11295:2022) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11124-1:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:1993) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 2: Chilled-iron grit (ISO 11124-2:2018, Corrected version 2018-12) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:1993) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 3: High-carbon cast-steel shot and grit (ISO 11124-3:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:1993) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 4: Low-carbon cast-steel shot (ISO 11124-4:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for metallic blast-cleaning abrasives - Part 5: Cut steel wire (ISO 11124-5:2019) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2000) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 10: Almandite garnet (ISO 11126-10:2017) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 1: General introduction and classification (ISO 11126-1:2025) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:1993) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 3: Copper refinery slag (ISO 11126-3:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 5: Nickel slag (ISO 11126-5:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron and steel slags (ISO 11126-6:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag (ISO 11126-6:1993) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:1995) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 7: Fused aluminium oxide (ISO 11126-7:2018) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine (ISO 11126-8:2018, Corrected version 2018-11) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 8: Olivine sand (ISO 11126-8:1993) | |
| Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 9: Staurolite (ISO 11126-9:1999) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:1993) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11125-1:2018) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:1993) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11125-2:2018) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:1993) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 3: Determination of hardness (ISO 11125-3:2018) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:1993) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 4: Determination of apparent density (ISO 11125-4:2018) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 5: Determination of percentage defective particles and of microstructure (ISO... | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:1993) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 6: Determination of foreign matter (ISO 11125-6:2018) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:1993) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 7: Determination of moisture (ISO 11125-7:2018) | |
| Preparation of steel substrates before application of paints and related products - Test methods for metallic blast-cleaning abrasives - Part 9: Wear testing and performance (ISO 11125-9:2021) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2011) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 1: Sampling (ISO 11127-1:2020) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2011) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 2: Determination of particle size distribution (ISO 11127-2:2020) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2011) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 3: Determination of apparent density (ISO 11127-3:2020) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 4: Assessment of hardness by a glass slide test (ISO... | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2011) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 5: Determination of moisture (ISO 11127-5:2020) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2011)... | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 6: Determination of water-soluble contaminants by conductivity measurement (ISO 11127-6:2022)... | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2011) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 7: Determination of water-soluble chlorides (ISO 11127-7:2022) | |
| Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blast-cleaning abrasives - Part 8: Field determination of water-soluble chlorides (ISO 11127-8:2020) | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR METALLIC BLAST-CLEANING ABRASIVES. PART 1: GENERAL INTRODUCTION AND CLASSIFICATION. (ISO 11124-1:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 1: GENERAL INTRODUCTION AND CLASSIFICATION (ISO 11126-1:1993, INCLUDING TECHNICAL CORRIGENDA 1:1997 AND 2:1997). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. SPECIFICATIONS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 5: NICKEL REFINERY SLAG. (ISO 11126-5:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 1: SAMPLING. (ISO 11127-1:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 2: DETERMINATION OF PARTICLE SIZE DISTRIBUTION. (ISO 11127-2:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 3: DETERMINATION OF APPARENT DENSITY. (ISO 11127-3:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 4: ASSESSMENT OF HARDNESS BY A GLASS SLIDE TEST. (ISO 11127-4:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 5: DETERMINATION OF MOISTURE (ISO 11127-5:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 6: DETERMINATION OF WATER-SOLUBLE CONTAMINANTS BY CONDUCTIVITY MEASUREMENT. (ISO 11127-6:1993). | |
| PREPARATION OF STEEL SUBSTRATES BEFORE APPLICATION OF PAINTS AND RELATED PRODUCTS. TEST METHODS FOR NON-METALLIC BLAST-CLEANING ABRASIVES. PART 7: DETERMINATION OF WATER SOLUBLE CHLORIDES. (ISO 11127-7:1993). | |
| Preparation of steel substrates before application of paintsand related products - Specifications for non-metallic blast-cleaning abrasives - Part 4: Coal furnace slag (ISO 11126-4:1993) | |
| Reciprocating internal combustion engines - Handle starting equipment - Part 1: Safety requirements and tests (ISO 11102-1:1997) | |
| Reciprocating internal combustion engines - Handle starting equipment - Part 2: Method of testing the angle of disengagement (ISO 11102-2:1997) | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. HANDLE STARTING EQUIPMENT. PART 1: SAFETY REQUIREMETS AND TESTS. (ISO 11102-1:1997). | |
| RECIPROCATING INTERNAL COMBUSTION ENGINES. HANDLE STARTING EQUIPMENT. PART 2: METHOD OF TESTING THE ANGLE OF DISENGAGEMENT. (ISO 11102-2:1997). | |
| Recreational diving services - Requirements for introductory programmes to scuba diving (ISO 11121:2017) | |
| Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) (Endorsed by AENOR in September of 2008.) | |
| Safety of machinery - Integrated manufacturing systems - Basic requirements (ISO 11161:2007) | |
| Safety of machinery - Integrated manufacturing systems - Basic requirements - Amendment 1 (ISO 11161:2007/Amd 1:2010) | |
| SAFETY REQUIREMENTS FOR TEXTILES MACHINERY. (ISO 11111:1995). | |
| Sensory analysis - Methodology - General guidance for conducting hedonic tests with consumers in a controlled area (ISO 11136:2014) | |
| Sensory analysis - Methodology - General guidance for conducting hedonic tests with consumers in a controlled area - Amendment 1 (ISO 11136:2014/Amd 1:2020) | |
| Sensory analysis - Methodology - Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012) | |
| Sensory analysis - Methodology - Guidelines for the measurement of the performance of a quantitative descriptive sensory panel (ISO 11132:2021) | |
| Small craft - Graphical symbols (ISO 11192:2005) | |
| Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:1997) | |
| Small craft - Ventilation of petrol engine and/or petrol tank compartments (ISO 11105:2020) | |
| Soil quality - Determination of dry bulk density (ISO 11272:1998) (Endorsed by AENOR in May of 2014.) | |
| Soil quality - Determination of dry bulk density (ISO 11272:2017) (Endorsed by Asociación Española de Normalización in May of 2017.) | |
| Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:1994+Cor 1:1996) | |
| Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO 11260:2018) (Endorsed by Asociación Española de Normalización in June of 2018.) | |
| Soil quality - Determination of pore water pressure - Tensiometer method (ISO 11276:1995) (Endorsed by AENOR in May of 2014.) | |
| Soil quality - Determination of the effects of pollutants on soil flora - Part 1: Method for the measurement of inhibition of root growth (ISO 11269-1:2012) (Endorsed by AENOR in... | |
| Soil quality - Determination of the effects of pollutants on soil flora - Part 2: Effects of contaminated soil on the emergence and early growth of higher plants (ISO 11269-2:2012)... | |
| Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:1998 + Cor 1:2009) (Endorsed by AENOR in May of 2014.) | |
| Soil quality - Determination of the water-retention characteristic - Laboratory methods (ISO 11274:2019) (Endorsed by Asociación Española de Normalización in November of 2019.) | |
| Soil quality - Determination of unsaturated hydraulic conductivity and water-retention characteristic - Wind's evaporation method (ISO 11275:2004) (Endorsed by AENOR in May of 2014.) | |
| Soil quality - Direct extraction of soil DNA (ISO 11063:2020) (Endorsed by Asociación Española de Normalización in November of 2020.) | |
| Soil quality - Effects of pollutants on earthworms - Part 1: Determination of acute toxicity to Eisenia fetida/Eisenia andrei (ISO 11268-1:2012) (Endorsed by AENOR in September of 2015.) | |
| Soil quality - Effects of pollutants on earthworms - Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei (ISO 11268-2:2012) (Endorsed by AENOR in September of 2015.) | |
| Soil quality - Effects of pollutants on earthworms - Part 2: Determination of effects on reproduction of Eisenia fetida/Eisenia andrei and other earthworm species (ISO 11268-2:2023) (Endorsed by Asociación Española... | |
| Soil quality - Effects of pollutants on earthworms - Part 3: Guidance on the determination of effects in field situations (ISO 11268-3:2014) (Endorsed by AENOR in September of 2015.) | |
| Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994) (Endorsed by Asociación Española de Normalización in June of 2020.) | |
| Soil quality - Guidance on laboratory testing for biodegradation of organic chemicals in soil under aerobic conditions (ISO 11266:1994) | |
| Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2014) (Endorsed by AENOR in March of 2014.) | |
| Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil contaminants (ISO 11267:2023) (Endorsed by Asociación Española de Normalización in September of 2023.) | |
| Soil quality - Method to directly extract DNA from soil samples (ISO 11063:2012) (Endorsed by AENOR in April of 2013.) | |
| Soil quality - Vocabulary (ISO 11074:2015) (Endorsed by AENOR in August of 2015.) | |
| Soil quality - Vocabulary (ISO 11074:2025) (Endorsed by Asociación Española de Normalización in April of 2025.) | |
| Soil quality - Vocabulary - Amendment 1 (ISO 11074:2015/Amd 1:2020) (Endorsed by Asociación Española de Normalización in April of 2020.) | |
| STAINLESS STEEL TUBES. DIMENSIONS, TOLERANCES AND CONVENTIONAL MASSES PER UNIT LENGTH. (ISO 1127:1992). | |
| STARCH AND DERIVED PRODUCTS. HEAVEY METALS CONTENT. PART 2: DETERMINATION OF MERCURY CONTENT BY ATOMIC ABSORPTION SPECTROMETRY (ISO 11212-2:1997). | |
| STARCH AND DERIVED PRODUCTS. HEAVEY METALS CONTENT. PART 3: DETERMINATION OF LEAD CONTENT BY ATOMIC ABSORPTION SPECTROMETRY WITH ELECTROTHERMAL ATOMIZATION. (ISO 11212-3:1997). | |
| STARCH AND DERIVED PRODUCTS. HEAVEY METALS CONTENT. PART 4: DETERMINATION OF CADMIUM CONTENT BY ATOMIC ABSORPTION SPECTROMETRY WITH ELECTROTHERMAL ATOMIZATION. (ISO 11212-4:1997). | |
| STARCH AND DERIVED PRODUCTS. HEAVY METALS CONTENT. PART 1: DETERMINATION OF ARSENIC CONTENT BY ATOMIC ABSORPTION SPECTROMETRY. (ISO 11212-1:1997). | |
| STERILE SINGLE-USE INTRAVASCULAR CATHETER INTRODUCERS (ISO 11070:1998) | |
| Sterile single-use intravascular introducers, dilators and guidewires (ISO 11070:2014) | |
| Sterile single-use intravascular introducers, dilators and guidewires - Amendment 1 (ISO 11070:2014/Amd 1:2018) | |
| Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2006) | |
| Sterilization of health care products - Biological indicators - Part 1: General requirements (ISO 11138-1:2017) | |
| Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2006) | |
| Sterilization of health care products - Biological indicators - Part 2: Biological indicators for ethylene oxide sterilization processes (ISO 11138-2:2017) | |
| Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2006) | |
| Sterilization of health care products - Biological indicators - Part 3: Biological indicators for moist heat sterilization processes (ISO 11138-3:2017) | |
| Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes (ISO 11138-4:2006) | |
| Sterilization of health care products - Biological indicators - Part 4: Biological indicators for dry heat sterilization processes (ISO 11138-4:2017) | |
| Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2006) | |
| Sterilization of health care products - Biological indicators - Part 5: Biological indicators for low-temperature steam and formaldehyde sterilization processes (ISO 11138-5:2017) | |
| Sterilization of health care products - Biological indicators - Part 7: Guidance for the selection, use and interpretation of results (ISO 11138-7:2019) | |
| Sterilization of health care products - Biological indicators - Part 8: Method for validation of a reduced incubation time for a biological indicator (ISO 11138-8:2021) | |
| Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2005) | |
| Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO 11140-1:2014) | |
| Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007) | |
| Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007, including Cor 1:2007)... | |
| Sterilization of health care products - Chemical indicators - Part 3: Class 2 indicator systems for use in the Bowie and Dick-type steam penetration test (ISO 11140-3:2007/Cor 1:2007) | |
| Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007)... | |
| Sterilization of health care products - Chemical indicators - Part 6: Type 2 indicators and process challenge devices for use in performance testing of small steam sterilizers (ISO 11140-6:2022) | |
| Sterilization of health care products - Ethylene oxide - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11135-1:2007) | |
| Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006) (Endorsed by AENOR in... | |
| Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006) | |
| Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) | |
| Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006/Amd 1:2013) | |
| Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices - Amendment 2: Revision to 4.3.4... | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006) (Endorsed by AENOR in October of 2006.) | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006, corrected version 2006-08-01) | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2006/Cor 1:2009) | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2012) | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO 11137-2:2013) | |
| Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose - Amendment 1 (ISO 11137-2:2013/Amd 1:2022) | |
| Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects (ISO 11137-3:2006) (Endorsed by AENOR in October of 2006.) | |
| Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects (ISO 11137-3:2006) | |
| Sterilization of health care products - Radiation - Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017) | |
| Sterilization of health care products - Vocabulary of terms used in sterilization and related equipment and process standards (ISO 11139:2018) | |
| Sterilization of health care products - Vocabulary of terms used in sterilization and related equipment and process standards - Amendment 1: Amended and additional terms and definitions (ISO 11139:2018/Amd 1:2024)... | |
| Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 11135:2014) | |
| Sterilization of health-care products - Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices - Amendment 1: Revision of Annex E,... | |
| Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2009) | |
| Textile machinery - Safety requirements - Part 1: Common requirements (ISO 11111-1:2016) | |
| Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines - Amendment 1 (ISO 11111-2:2005/Amd 1:2009) | |
| Textile machinery - Safety requirements - Part 2: Spinning preparatory and spinning machines - Amendment 2 (ISO 11111-2:2005/Amd 2:2016) | |
| Textile machinery - Safety requirements - Part 3: Nonwoven machinery (ISO 11111-3:2005) | |
| Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 1 (ISO 11111-3:2005/Amd 1:2009) | |
| Textile machinery - Safety requirements - Part 3: Nonwoven machinery - Amendment 2 (ISO 11111-3:2005/Amd 2:2016) | |
| Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 11111-4:2005) | |
| Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 11111-4:2005/Amd 1:2009) | |
| Textile machinery - Safety requirements - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 11111-4:2005/Amd 2:2016) | |
| Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting (ISO 11111-5:2005) | |
| Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 1 (ISO 11111-5:2005/Amd 1:2009) | |
| Textile machinery - Safety requirements - Part 5: Preparatory machinery to weaving and knitting - Amendment 2 (ISO 11111-5:2005/Amd 2:2016) | |
| Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery (ISO 11111-6:2005) | |
| Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery - Amendment 1 (ISO 11111-6:2005/Amd 1:2009) | |
| Textile machinery - Safety requirements - Part 6: Fabric manufacturing machinery - Amendment 2 (ISO 11111-6:2005/Amd 2:2016) | |
| Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery (ISO 11111-7:2005) | |
| Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery - Amendment 1 (ISO 11111-7:2005/Amd 1:2009) | |
| Textile machinery - Safety requirements - Part 7: Dyeing and finishing machinery - Amendment 2 (ISO 11111-7:2005/Amd 2:2016) | |
| Textile machinery- Safety requirements- Part 1: Common requirements (ISO 11111-1:2005) | |
| Textile machinery- Safety requirements- Part 2: Spinning preparatory and spinning machines (ISO 11111-2:2005) | |
| Textiles - Physiological effects - Measurement of thermal and water-vapour resistance under steady-state conditions (sweating guarded-hotplate test) (ISO 11092:2014) | |
| Thermoplastics pipes - Determination of resistance to external blows - Staircase method (ISO 11173:1994) | |
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 2: Non-metallic materials. (ISO 11114-2:2000). | |
| Transportable gas cylinders - Compatibility of cylinder and valve materials with gas contents - Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) | |
| TRANSPORTABLE GAS CYLINDERS. COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS. PART 1: METALLIC MATERIALS. (ISO 11114-1:1997). | |
| TRANSPORTABLE GAS CYLINDERS. COMPATIBILITY OF CYLINDER AND VALVE MATERIALS WITH GAS CONTENTS. PART 3: AUTOGENOUS IGNITION TEST IN OXYGEN ATMOSPHERE. (ISO 11114-3:1997). | |
| Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 4: Test methods for selecting metallic materials resistant to hydrogen embrittlement (ISO 11114-4:2005) | |
| Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2016) (Endorsed by AENOR... | |
| Vitreous and porcelain enamels - Inside and outside enamelled valves and pressure pipe fittings for untreated and potable water supply - Quality requirements and testing (ISO 11177:2019) (Endorsed by Asociación... | |
| Walking aids manipulated by both arms - Requirements and test methods - Part 1: Walking frames (ISO 11199-1:1999) | |
| Walking aids manipulated by both arms - Requirements and test methods - Part 2: Rollators (ISO 11199-2:2005) | |
| Walking aids manipulated by both arms - Requirements and test methods - Part 3: Walking tables (ISO 11199-3:2005) | |
| WALKING AIDS MANIPULATED BY BOTH ARMS. REQUIREMENTS AND TEST METHODS. PART 2: ROLLATORS (ISO 11199-2:1999) | |
| Walking aids manipulated by one arm - Requirements and test methods - Part 4: Walking sticks with three or more legs (ISO 11334-4:1999) | |
| WALKING AIDS MANIPULATED BY ONE ARM. REQUIREMENTS AND TEST METHODS. PART 1: ELBOW CRUTCHES. (ISO 11334-1:1994). | |
| Water quality - Determination of dissolved bromate - Method using ion chromatography (IC) and post column reaction (PCR) (ISO 11206:2011) |
| << Prev | Next >> |